From 553a59fc8f5d51c3824c0b7d4ca61e780157defa Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 19 May 2015 16:28:12 +0200 Subject: drm/imx: parallel-display: fix drm_panel support The parallel-display driver used an undocumented, non-standard property "fsl,panel" to optionally associate with a drm_panel device. This patch fixes the driver to use the same OF graph bindings as the LDB driver instead: parallel-display { compatible = "fsl,imx-parallel-display"; ... port@1 { reg = <1>; parallel_out: endpoint { remote_endpoint = <&panel_in>; }; }; }; panel { ... port { panel_in: endpoint { remote-endpoint = <¶llel_out>; }; }; }; Signed-off-by: Philipp Zabel Tested-by: Gary Bisson --- .../devicetree/bindings/drm/imx/fsl-imx-drm.txt | 26 ++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt index e75f0e549fff..971c3eedb1c7 100644 --- a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt +++ b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt @@ -65,8 +65,10 @@ Optional properties: - edid: verbatim EDID data block describing attached display. - ddc: phandle describing the i2c bus handling the display data channel -- port: A port node with endpoint definitions as defined in +- port@[0-1]: Port nodes with endpoint definitions as defined in Documentation/devicetree/bindings/media/video-interfaces.txt. + Port 0 is the input port connected to the IPU display interface, + port 1 is the output port connected to a panel. example: @@ -75,9 +77,29 @@ display@di0 { edid = [edid-data]; interface-pix-fmt = "rgb24"; - port { + port@0 { + reg = <0>; + display_in: endpoint { remote-endpoint = <&ipu_di0_disp0>; }; }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +panel { + ... + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; }; -- cgit v1.2.3