From e8ade6151905ba392cbbd03074207cacc7414d5d Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 13 May 2020 16:07:21 +0200 Subject: dt-bindings: display: sun8i-mixer: Allow for an iommu property The H6 mixer is attached to an IOMMU, so let's allow that property to be set in the bindings. Reviewed-by: Rob Herring Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/7941e0c02794e6336da75fcac950ecd43be7fd97.1589378833.git-series.maxime@cerno.tech --- .../devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml index 1dee641e3ea1..c040eef56518 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml @@ -36,6 +36,9 @@ properties: - const: bus - const: mod + iommus: + maxItems: 1 + resets: maxItems: 1 -- cgit v1.2.3 From 5a2e9b658cdcad5ff5b9c44533a401497441a287 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Thu, 7 May 2020 14:34:58 -0700 Subject: dt-bindings: drm/bridge: ti-sn65dsi86: Convert to yaml This moves the bindings over, based a lot on toshiba,tc358768.yaml. Unless there's someone known to be better, I've set the maintainer in the yaml as the first person to submit bindings. Signed-off-by: Douglas Anderson Reviewed-by: Stephen Boyd Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200507143354.v5.4.Ifcdc4ecb12742a27862744ee1e8753cb95a38a7f@changeid --- .../bindings/display/bridge/ti,sn65dsi86.txt | 87 ------- .../bindings/display/bridge/ti,sn65dsi86.yaml | 285 +++++++++++++++++++++ 2 files changed, 285 insertions(+), 87 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt deleted file mode 100644 index 8ec4a7f2623a..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt +++ /dev/null @@ -1,87 +0,0 @@ -SN65DSI86 DSI to eDP bridge chip --------------------------------- - -This is the binding for Texas Instruments SN65DSI86 bridge. -http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf - -Required properties: -- compatible: Must be "ti,sn65dsi86" -- reg: i2c address of the chip, 0x2d as per datasheet -- enable-gpios: gpio specification for bridge_en pin (active high) - -- vccio-supply: A 1.8V supply that powers up the digital IOs. -- vpll-supply: A 1.8V supply that powers up the displayport PLL. -- vcca-supply: A 1.2V supply that powers up the analog circuits. -- vcc-supply: A 1.2V supply that powers up the digital core. - -Optional properties: -- interrupts-extended: Specifier for the SN65DSI86 interrupt line. - -- gpio-controller: Marks the device has a GPIO controller. -- #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify flags. - See ../../gpio/gpio.txt for more information. -- #pwm-cells : Should be one. See ../../pwm/pwm.yaml for description of - the cell formats. - -- clock-names: should be "refclk" -- clocks: Specification for input reference clock. The reference - clock rate must be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz. - -- data-lanes: See ../../media/video-interface.txt -- lane-polarities: See ../../media/video-interface.txt - -- suspend-gpios: specification for GPIO1 pin on bridge (active low) - -Required nodes: -This device has two video ports. Their connections are modelled using the -OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for DSI input -- Video port 1 for eDP output - -Example -------- - -edp-bridge@2d { - compatible = "ti,sn65dsi86"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x2d>; - - enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>; - suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>; - - interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>; - - vccio-supply = <&pm8916_l17>; - vcca-supply = <&pm8916_l6>; - vpll-supply = <&pm8916_l17>; - vcc-supply = <&pm8916_l6>; - - clock-names = "refclk"; - clocks = <&input_refclk>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - edp_bridge_in: endpoint { - remote-endpoint = <&dsi_out>; - }; - }; - - port@1 { - reg = <1>; - - edp_bridge_out: endpoint { - data-lanes = <2 1 3 0>; - lane-polarities = <0 1 0 1>; - remote-endpoint = <&edp_panel_in>; - }; - }; - }; -} diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml new file mode 100644 index 000000000000..07d26121afca --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml @@ -0,0 +1,285 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SN65DSI86 DSI to eDP bridge chip + +maintainers: + - Sandeep Panda + +description: | + The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP. + http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf + +properties: + compatible: + const: ti,sn65dsi86 + + reg: + const: 0x2d + + enable-gpios: + maxItems: 1 + description: GPIO specifier for bridge_en pin (active high). + + suspend-gpios: + maxItems: 1 + description: GPIO specifier for GPIO1 pin on bridge (active low). + + vccio-supply: + description: A 1.8V supply that powers the digital IOs. + + vpll-supply: + description: A 1.8V supply that powers the DisplayPort PLL. + + vcca-supply: + description: A 1.2V supply that powers the analog circuits. + + vcc-supply: + description: A 1.2V supply that powers the digital core. + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: + Clock specifier for input reference clock. The reference clock rate must + be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz. + + clock-names: + const: refclk + + gpio-controller: true + '#gpio-cells': + const: 2 + description: + First cell is pin number, second cell is flags. GPIO pin numbers are + 1-based to match the datasheet. See ../../gpio/gpio.txt for more + information. + + '#pwm-cells': + const: 1 + description: See ../../pwm/pwm.yaml for description of the cell formats. + + ports: + type: object + additionalProperties: false + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + additionalProperties: false + + description: + Video port for MIPI DSI input + + properties: + reg: + const: 0 + + endpoint: + type: object + additionalProperties: false + properties: + remote-endpoint: true + + required: + - reg + + port@1: + type: object + additionalProperties: false + + description: + Video port for eDP output (panel or connector). + + properties: + reg: + const: 1 + + endpoint: + type: object + additionalProperties: false + + properties: + remote-endpoint: true + + data-lanes: + oneOf: + - minItems: 1 + maxItems: 1 + uniqueItems: true + items: + enum: + - 0 + - 1 + description: + If you have 1 logical lane the bridge supports routing + to either port 0 or port 1. Port 0 is suggested. + See ../../media/video-interface.txt for details. + + - minItems: 2 + maxItems: 2 + uniqueItems: true + items: + enum: + - 0 + - 1 + description: + If you have 2 logical lanes the bridge supports + reordering but only on physical ports 0 and 1. + See ../../media/video-interface.txt for details. + + - minItems: 4 + maxItems: 4 + uniqueItems: true + items: + enum: + - 0 + - 1 + - 2 + - 3 + description: + If you have 4 logical lanes the bridge supports + reordering in any way. + See ../../media/video-interface.txt for details. + + lane-polarities: + minItems: 1 + maxItems: 4 + items: + enum: + - 0 + - 1 + description: See ../../media/video-interface.txt + + dependencies: + lane-polarities: [data-lanes] + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + +required: + - compatible + - reg + - enable-gpios + - vccio-supply + - vpll-supply + - vcca-supply + - vcc-supply + - ports + +additionalProperties: false + +examples: + - | + #include + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + + interrupt-parent = <&tlmm>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&src_pp1800_s4a>; + vccio-supply = <&src_pp1800_s4a>; + vcca-supply = <&src_pp1200_l2a>; + vcc-supply = <&src_pp1200_l2a>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + clock-names = "refclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + }; + }; + - | + #include + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + + enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>; + suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>; + + interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>; + + vccio-supply = <&pm8916_l17>; + vcca-supply = <&pm8916_l6>; + vpll-supply = <&pm8916_l17>; + vcc-supply = <&pm8916_l6>; + + clock-names = "refclk"; + clocks = <&input_refclk>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + edp_bridge_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + edp_bridge_out: endpoint { + data-lanes = <2 1 3 0>; + lane-polarities = <0 1 0 1>; + remote-endpoint = <&edp_panel_in>; + }; + }; + }; + }; + }; -- cgit v1.2.3 From 1dbc979172afcf5380932e8aa76429d6e564a69c Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Thu, 7 May 2020 14:34:59 -0700 Subject: dt-bindings: drm/bridge: ti-sn65dsi86: Document no-hpd The ti-sn65dsi86 MIPI DSI to eDP bridge chip has a dedicated hardware HPD (Hot Plug Detect) pin on it, but it's mostly useless for eDP because of excessive debouncing in hardware. Specifically there is no way to disable the debouncing and for eDP debouncing hurts you because HPD is just used for knowing when the panel is ready, not for detecting physical plug events. Currently the driver in Linux just assumes that nobody has HPD hooked up. It relies on folks setting the "no-hpd" property in the panel node to specify that HPD isn't hooked up and then the panel driver using this to add some worst case delays when turning on the panel. Apparently it's also useful to specify "no-hpd" in the bridge node so that the bridge driver can make sure it's doing the right thing without peeking into the panel [1]. This would be used if anyone ever found it useful to implement support for the HW HPD pin on the bridge. Let's add this property to the bindings. NOTES: - This is somewhat of a backward-incompatible change. All current known users of ti-sn65dsi86 didn't have "no-hpd" specified in the bridge node yet none of them had HPD hooked up. This worked because the current Linux driver just assumed that HPD was never hooked up. We could make it less incompatible by saying that for this bridge it's assumed HPD isn't hooked up _unless_ a property is defined, but "no-hpd" is much more standard and it's unlikely to matter unless someone quickly goes and implements HPD in the driver. - It is sensible to specify "no-hpd" at the bridge chip level and specify "hpd-gpios" at the panel level. That would mean HPD is hooked up to some other GPIO in the system, just not the hardware HPD pin on the bridge chip. [1] https://lore.kernel.org/r/20200417180819.GE5861@pendragon.ideasonboard.com Signed-off-by: Douglas Anderson Reviewed-by: Stephen Boyd Reviewed-by: Linus Walleij Reviewed-by: Laurent Pinchart Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200507143354.v5.5.I72892d485088e57378a4748c86bc0f6c2494d807@changeid --- .../devicetree/bindings/display/bridge/ti,sn65dsi86.yaml | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml index 07d26121afca..be10e8cf31e1 100644 --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml @@ -28,6 +28,12 @@ properties: maxItems: 1 description: GPIO specifier for GPIO1 pin on bridge (active low). + no-hpd: + type: boolean + description: + Set if the HPD line on the bridge isn't hooked up to anything or is + otherwise unusable. + vccio-supply: description: A 1.8V supply that powers the digital IOs. @@ -213,6 +219,8 @@ examples: clocks = <&rpmhcc RPMH_LN_BB_CLK2>; clock-names = "refclk"; + no-hpd; + ports { #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From efdff86db7978043af83d2e257c67cf9b921143f Mon Sep 17 00:00:00 2001 From: Emil Velikov Date: Fri, 15 May 2020 10:50:43 +0100 Subject: drm/todo: mention i915 in the struct_mutex section The i915 driver uses the struct_mutex, eventhough it does not use the locked version of the drm_object_gem API. Signed-off-by: Emil Velikov Acked-by: Sam Ravnborg Reviewed-by: Daniel Vetter Acked-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20200515095118.2743122-4-emil.l.velikov@gmail.com --- Documentation/gpu/todo.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 658b52f7ffc6..2ce52c5917f8 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -157,8 +157,8 @@ private lock. The tricky part is the BO free functions, since those can't reliably take that lock any more. Instead state needs to be protected with suitable subordinate locks or some cleanup work pushed to a worker thread. For performance-critical drivers it might also be better to go with a more -fine-grained per-buffer object and per-context lockings scheme. Currently only the -``msm`` driver still use ``struct_mutex``. +fine-grained per-buffer object and per-context lockings scheme. Currently only +the ``msm`` and `i915` drivers use ``struct_mutex``. Contact: Daniel Vetter, respective driver maintainers -- cgit v1.2.3 From 5b4231fb62f05457ef5ff283796cfd2df28ea2a1 Mon Sep 17 00:00:00 2001 From: Emil Velikov Date: Fri, 15 May 2020 10:50:44 +0100 Subject: drm/doc: drop struct_mutex references There's little point in providing partial and ancient information about the struct_mutex. Some drivers are using it, new ones should not. As-it this only provides for confusion. Signed-off-by: Emil Velikov Acked-by: Sam Ravnborg Reviewed-by: Daniel Vetter Acked-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20200515095118.2743122-5-emil.l.velikov@gmail.com --- Documentation/gpu/drm-mm.rst | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst index 1839762044be..5ba2ead8f317 100644 --- a/Documentation/gpu/drm-mm.rst +++ b/Documentation/gpu/drm-mm.rst @@ -178,11 +178,8 @@ GEM Objects Lifetime -------------------- All GEM objects are reference-counted by the GEM core. References can be -acquired and release by calling drm_gem_object_get() and drm_gem_object_put() -respectively. The caller must hold the :c:type:`struct drm_device ` -struct_mutex lock when calling drm_gem_object_get(). As a convenience, GEM -provides drm_gem_object_put_unlocked() functions that can be called without -holding the lock. +acquired and release by calling drm_gem_object_get() and drm_gem_object_put_unlocked() +respectively. When the last reference to a GEM object is released the GEM core calls the :c:type:`struct drm_driver ` gem_free_object_unlocked -- cgit v1.2.3 From be6ee102341bc4d07e050dda119ecb91229bc654 Mon Sep 17 00:00:00 2001 From: Emil Velikov Date: Fri, 15 May 2020 10:50:53 +0100 Subject: drm: remove _unlocked suffix in drm_gem_object_put_unlocked Spelling out _unlocked for each and every driver is a annoying. Especially if we consider how many drivers, do not know (or need to) about the horror stories involving struct_mutex. Just drop the suffix. It makes the API cleaner. Done via the following script: __from=drm_gem_object_put_unlocked __to=drm_gem_object_put for __file in $(git grep --name-only $__from); do sed -i "s/$__from/$__to/g" $__file; done Pay special attention to the compat #define v2: keep sed and #define removal separate Cc: David Airlie Cc: Daniel Vetter Signed-off-by: Emil Velikov Acked-by: Sam Ravnborg (v1) Reviewed-by: Steven Price Acked-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20200515095118.2743122-14-emil.l.velikov@gmail.com --- Documentation/gpu/drm-mm.rst | 2 +- drivers/gpu/drm/drm_client.c | 2 +- drivers/gpu/drm/drm_gem.c | 26 +++++++++++++------------- drivers/gpu/drm/drm_gem_cma_helper.c | 8 ++++---- drivers/gpu/drm/drm_gem_framebuffer_helper.c | 6 +++--- drivers/gpu/drm/drm_gem_shmem_helper.c | 4 ++-- drivers/gpu/drm/drm_gem_ttm_helper.c | 2 +- drivers/gpu/drm/drm_gem_vram_helper.c | 10 +++++----- drivers/gpu/drm/drm_prime.c | 6 +++--- include/drm/drm_gem.h | 2 +- 10 files changed, 34 insertions(+), 34 deletions(-) (limited to 'Documentation') diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst index 5ba2ead8f317..8c8540ee859c 100644 --- a/Documentation/gpu/drm-mm.rst +++ b/Documentation/gpu/drm-mm.rst @@ -178,7 +178,7 @@ GEM Objects Lifetime -------------------- All GEM objects are reference-counted by the GEM core. References can be -acquired and release by calling drm_gem_object_get() and drm_gem_object_put_unlocked() +acquired and release by calling drm_gem_object_get() and drm_gem_object_put() respectively. When the last reference to a GEM object is released the GEM core calls diff --git a/drivers/gpu/drm/drm_client.c b/drivers/gpu/drm/drm_client.c index 8cb93f5209a4..536a22747b51 100644 --- a/drivers/gpu/drm/drm_client.c +++ b/drivers/gpu/drm/drm_client.c @@ -237,7 +237,7 @@ static void drm_client_buffer_delete(struct drm_client_buffer *buffer) drm_gem_vunmap(buffer->gem, buffer->vaddr); if (buffer->gem) - drm_gem_object_put_unlocked(buffer->gem); + drm_gem_object_put(buffer->gem); if (buffer->handle) drm_mode_destroy_dumb(dev, buffer->handle, buffer->client->file); diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index d1a7f1844128..efc0367841e2 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -235,7 +235,7 @@ drm_gem_object_handle_put_unlocked(struct drm_gem_object *obj) mutex_unlock(&dev->object_name_lock); if (final) - drm_gem_object_put_unlocked(obj); + drm_gem_object_put(obj); } /* @@ -331,7 +331,7 @@ int drm_gem_dumb_map_offset(struct drm_file *file, struct drm_device *dev, *offset = drm_vma_node_offset_addr(&obj->vma_node); out: - drm_gem_object_put_unlocked(obj); + drm_gem_object_put(obj); return ret; } @@ -690,7 +690,7 @@ static int objects_lookup(struct drm_file *filp, u32 *handle, int count, * Returns: * * @objs filled in with GEM object pointers. Returned GEM objects need to be - * released with drm_gem_object_put_unlocked(). -ENOENT is returned on a lookup + * released with drm_gem_object_put(). -ENOENT is returned on a lookup * failure. 0 is returned on success. * */ @@ -785,7 +785,7 @@ long drm_gem_dma_resv_wait(struct drm_file *filep, u32 handle, else if (ret > 0) ret = 0; - drm_gem_object_put_unlocked(obj); + drm_gem_object_put(obj); return ret; } @@ -860,7 +860,7 @@ drm_gem_flink_ioctl(struct drm_device *dev, void *data, err: mutex_unlock(&dev->object_name_lock); - drm_gem_object_put_unlocked(obj); + drm_gem_object_put(obj); return ret; } @@ -898,7 +898,7 @@ drm_gem_open_ioctl(struct drm_device *dev, void *data, /* drm_gem_handle_create_tail unlocks dev->object_name_lock. */ ret = drm_gem_handle_create_tail(file_priv, obj, &handle); - drm_gem_object_put_unlocked(obj); + drm_gem_object_put(obj); if (ret) return ret; @@ -991,7 +991,7 @@ EXPORT_SYMBOL(drm_gem_object_free); * driver doesn't use &drm_device.struct_mutex for anything. * * For drivers not encumbered with legacy locking use - * drm_gem_object_put_unlocked() instead. + * drm_gem_object_put() instead. */ void drm_gem_object_put_locked(struct drm_gem_object *obj) @@ -1030,7 +1030,7 @@ void drm_gem_vm_close(struct vm_area_struct *vma) { struct drm_gem_object *obj = vma->vm_private_data; - drm_gem_object_put_unlocked(obj); + drm_gem_object_put(obj); } EXPORT_SYMBOL(drm_gem_vm_close); @@ -1079,7 +1079,7 @@ int drm_gem_mmap_obj(struct drm_gem_object *obj, unsigned long obj_size, if (obj->funcs && obj->funcs->mmap) { ret = obj->funcs->mmap(obj, vma); if (ret) { - drm_gem_object_put_unlocked(obj); + drm_gem_object_put(obj); return ret; } WARN_ON(!(vma->vm_flags & VM_DONTEXPAND)); @@ -1089,7 +1089,7 @@ int drm_gem_mmap_obj(struct drm_gem_object *obj, unsigned long obj_size, else if (dev->driver->gem_vm_ops) vma->vm_ops = dev->driver->gem_vm_ops; else { - drm_gem_object_put_unlocked(obj); + drm_gem_object_put(obj); return -EINVAL; } @@ -1155,13 +1155,13 @@ int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma) return -EINVAL; if (!drm_vma_node_is_allowed(node, priv)) { - drm_gem_object_put_unlocked(obj); + drm_gem_object_put(obj); return -EACCES; } if (node->readonly) { if (vma->vm_flags & VM_WRITE) { - drm_gem_object_put_unlocked(obj); + drm_gem_object_put(obj); return -EINVAL; } @@ -1171,7 +1171,7 @@ int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma) ret = drm_gem_mmap_obj(obj, drm_vma_node_size(node) << PAGE_SHIFT, vma); - drm_gem_object_put_unlocked(obj); + drm_gem_object_put(obj); return ret; } diff --git a/drivers/gpu/drm/drm_gem_cma_helper.c b/drivers/gpu/drm/drm_gem_cma_helper.c index 12e98fb28229..b3db3ca7bd7a 100644 --- a/drivers/gpu/drm/drm_gem_cma_helper.c +++ b/drivers/gpu/drm/drm_gem_cma_helper.c @@ -114,7 +114,7 @@ struct drm_gem_cma_object *drm_gem_cma_create(struct drm_device *drm, return cma_obj; error: - drm_gem_object_put_unlocked(&cma_obj->base); + drm_gem_object_put(&cma_obj->base); return ERR_PTR(ret); } EXPORT_SYMBOL_GPL(drm_gem_cma_create); @@ -156,7 +156,7 @@ drm_gem_cma_create_with_handle(struct drm_file *file_priv, */ ret = drm_gem_handle_create(file_priv, gem_obj, handle); /* drop reference from allocate - handle holds it now. */ - drm_gem_object_put_unlocked(gem_obj); + drm_gem_object_put(gem_obj); if (ret) return ERR_PTR(ret); @@ -380,13 +380,13 @@ unsigned long drm_gem_cma_get_unmapped_area(struct file *filp, return -EINVAL; if (!drm_vma_node_is_allowed(node, priv)) { - drm_gem_object_put_unlocked(obj); + drm_gem_object_put(obj); return -EACCES; } cma_obj = to_drm_gem_cma_obj(obj); - drm_gem_object_put_unlocked(obj); + drm_gem_object_put(obj); return cma_obj->vaddr ? (unsigned long)cma_obj->vaddr : -EINVAL; } diff --git a/drivers/gpu/drm/drm_gem_framebuffer_helper.c b/drivers/gpu/drm/drm_gem_framebuffer_helper.c index ccc2c71fa491..109d11fb4cd4 100644 --- a/drivers/gpu/drm/drm_gem_framebuffer_helper.c +++ b/drivers/gpu/drm/drm_gem_framebuffer_helper.c @@ -95,7 +95,7 @@ void drm_gem_fb_destroy(struct drm_framebuffer *fb) int i; for (i = 0; i < 4; i++) - drm_gem_object_put_unlocked(fb->obj[i]); + drm_gem_object_put(fb->obj[i]); drm_framebuffer_cleanup(fb); kfree(fb); @@ -175,7 +175,7 @@ int drm_gem_fb_init_with_funcs(struct drm_device *dev, + mode_cmd->offsets[i]; if (objs[i]->size < min_size) { - drm_gem_object_put_unlocked(objs[i]); + drm_gem_object_put(objs[i]); ret = -EINVAL; goto err_gem_object_put; } @@ -189,7 +189,7 @@ int drm_gem_fb_init_with_funcs(struct drm_device *dev, err_gem_object_put: for (i--; i >= 0; i--) - drm_gem_object_put_unlocked(objs[i]); + drm_gem_object_put(objs[i]); return ret; } diff --git a/drivers/gpu/drm/drm_gem_shmem_helper.c b/drivers/gpu/drm/drm_gem_shmem_helper.c index df31e5782eed..339eee79ea52 100644 --- a/drivers/gpu/drm/drm_gem_shmem_helper.c +++ b/drivers/gpu/drm/drm_gem_shmem_helper.c @@ -360,7 +360,7 @@ drm_gem_shmem_create_with_handle(struct drm_file *file_priv, */ ret = drm_gem_handle_create(file_priv, &shmem->base, handle); /* drop reference from allocate - handle holds it now. */ - drm_gem_object_put_unlocked(&shmem->base); + drm_gem_object_put(&shmem->base); if (ret) return ERR_PTR(ret); @@ -684,7 +684,7 @@ drm_gem_shmem_prime_import_sg_table(struct drm_device *dev, err_free_array: kvfree(shmem->pages); err_free_gem: - drm_gem_object_put_unlocked(&shmem->base); + drm_gem_object_put(&shmem->base); return ERR_PTR(ret); } diff --git a/drivers/gpu/drm/drm_gem_ttm_helper.c b/drivers/gpu/drm/drm_gem_ttm_helper.c index 605a8a3da7f9..892b2288a104 100644 --- a/drivers/gpu/drm/drm_gem_ttm_helper.c +++ b/drivers/gpu/drm/drm_gem_ttm_helper.c @@ -74,7 +74,7 @@ int drm_gem_ttm_mmap(struct drm_gem_object *gem, * ttm has its own object refcounting, so drop gem reference * to avoid double accounting counting. */ - drm_gem_object_put_unlocked(gem); + drm_gem_object_put(gem); return 0; } diff --git a/drivers/gpu/drm/drm_gem_vram_helper.c b/drivers/gpu/drm/drm_gem_vram_helper.c index 8b2d5c945c95..0023ce1d2cf7 100644 --- a/drivers/gpu/drm/drm_gem_vram_helper.c +++ b/drivers/gpu/drm/drm_gem_vram_helper.c @@ -618,9 +618,9 @@ int drm_gem_vram_fill_create_dumb(struct drm_file *file, ret = drm_gem_handle_create(file, &gbo->bo.base, &handle); if (ret) - goto err_drm_gem_object_put_unlocked; + goto err_drm_gem_object_put; - drm_gem_object_put_unlocked(&gbo->bo.base); + drm_gem_object_put(&gbo->bo.base); args->pitch = pitch; args->size = size; @@ -628,8 +628,8 @@ int drm_gem_vram_fill_create_dumb(struct drm_file *file, return 0; -err_drm_gem_object_put_unlocked: - drm_gem_object_put_unlocked(&gbo->bo.base); +err_drm_gem_object_put: + drm_gem_object_put(&gbo->bo.base); return ret; } EXPORT_SYMBOL(drm_gem_vram_fill_create_dumb); @@ -737,7 +737,7 @@ int drm_gem_vram_driver_dumb_mmap_offset(struct drm_file *file, gbo = drm_gem_vram_of_gem(gem); *offset = drm_gem_vram_mmap_offset(gbo); - drm_gem_object_put_unlocked(gem); + drm_gem_object_put(gem); return 0; } diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c index 282774e469ac..bbfc713bfdc3 100644 --- a/drivers/gpu/drm/drm_prime.c +++ b/drivers/gpu/drm/drm_prime.c @@ -270,7 +270,7 @@ void drm_gem_dmabuf_release(struct dma_buf *dma_buf) struct drm_device *dev = obj->dev; /* drop the reference on the export fd holds */ - drm_gem_object_put_unlocked(obj); + drm_gem_object_put(obj); drm_dev_put(dev); } @@ -329,7 +329,7 @@ int drm_gem_prime_fd_to_handle(struct drm_device *dev, /* _handle_create_tail unconditionally unlocks dev->object_name_lock. */ ret = drm_gem_handle_create_tail(file_priv, obj, handle); - drm_gem_object_put_unlocked(obj); + drm_gem_object_put(obj); if (ret) goto out_put; @@ -500,7 +500,7 @@ out_have_handle: fail_put_dmabuf: dma_buf_put(dmabuf); out: - drm_gem_object_put_unlocked(obj); + drm_gem_object_put(obj); out_unlock: mutex_unlock(&file_priv->prime.lock); diff --git a/include/drm/drm_gem.h b/include/drm/drm_gem.h index 2f7b86c0649c..10c5d561eb18 100644 --- a/include/drm/drm_gem.h +++ b/include/drm/drm_gem.h @@ -188,7 +188,7 @@ struct drm_gem_object { * Reference count of this object * * Please use drm_gem_object_get() to acquire and drm_gem_object_put_locked() - * or drm_gem_object_put_unlocked() to release a reference to a GEM + * or drm_gem_object_put() to release a reference to a GEM * buffer object. */ struct kref refcount; -- cgit v1.2.3 From 0425662fdf05665235e768e2fbcb4ced12432b43 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 28 Apr 2020 20:19:27 +0300 Subject: drm: Nuke mode->vrefresh Get rid of mode->vrefresh and just calculate it on demand. Saves a bit of space and avoids the cached value getting out of sync with reality. Mostly done with cocci, with the following manual fixups: - Remove the now empty loop in drm_helper_probe_single_connector_modes() - Fix __MODE() macro in ch7006_mode.c - Fix DRM_MODE_ARG() macro in drm_modes.h - Remove leftover comment from samsung_s6d16d0_mode - Drop the TODO @@ @@ struct drm_display_mode { ... - int vrefresh; ... }; @@ identifier N; expression E; @@ struct drm_display_mode N = { - .vrefresh = E }; @@ identifier N; expression E; @@ struct drm_display_mode N[...] = { ..., { - .vrefresh = E } ,... }; @@ expression E; @@ { DRM_MODE(...), - .vrefresh = E, } @@ identifier M, R; @@ int drm_mode_vrefresh(const struct drm_display_mode *M) { ... - if (M->vrefresh > 0) - R = M->vrefresh; - else if (...) { ... } ... } @@ struct drm_display_mode *p; expression E; @@ ( - p->vrefresh = E; | - p->vrefresh + drm_mode_vrefresh(p) ) @@ struct drm_display_mode s; expression E; @@ ( - s.vrefresh = E; | - s.vrefresh + drm_mode_vrefresh(&s) ) @@ expression E; @@ - drm_mode_vrefresh(E) ? drm_mode_vrefresh(E) : drm_mode_vrefresh(E) + drm_mode_vrefresh(E) @find_substruct@ identifier X; identifier S; @@ struct X { ... struct drm_display_mode S; ... }; @@ identifier find_substruct.S; expression E; identifier I; @@ { .S = { - .vrefresh = E } } @@ identifier find_substruct.S; identifier find_substruct.X; expression E; identifier I; @@ struct X I[...] = { ..., .S = { - .vrefresh = E } ,... }; v2: Drop TODO v3: Rebase v4: Rebase Cc: Andrzej Hajda Cc: Neil Armstrong Cc: Laurent Pinchart Cc: Jonas Karlman Cc: Jernej Skrabec Cc: Inki Dae Cc: Joonyoung Shim Cc: Seung-Woo Kim Cc: Kyungmin Park Cc: Linus Walleij Cc: CK Hu Cc: Philipp Zabel Cc: Ben Skeggs Cc: Thierry Reding Cc: Sam Ravnborg Cc: Jerry Han Cc: Icenowy Zheng Cc: Jagan Teki Cc: Stefan Mavrodiev Cc: Robert Chiras Cc: "Guido Günther" Cc: Purism Kernel Team Cc: Benjamin Gaignard Cc: Vincent Abriou Cc: VMware Graphics Cc: Thomas Hellstrom Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Reviewed-by: Laurent Pinchart Reviewed-by: Emil Velikov Reviewed-by: Sam Ravnborg Acked-by: Linus Walleij Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-4-ville.syrjala@linux.intel.com --- Documentation/gpu/todo.rst | 20 -- drivers/gpu/drm/bridge/sii902x.c | 2 +- drivers/gpu/drm/drm_client_modeset.c | 2 +- drivers/gpu/drm/drm_edid.c | 328 ++++++++++----------- drivers/gpu/drm/drm_modes.c | 9 +- drivers/gpu/drm/drm_probe_helper.c | 3 - drivers/gpu/drm/exynos/exynos_hdmi.c | 5 +- drivers/gpu/drm/exynos/exynos_mixer.c | 2 +- drivers/gpu/drm/i2c/ch7006_mode.c | 1 - drivers/gpu/drm/i915/display/intel_display.c | 1 - .../gpu/drm/i915/display/intel_display_debugfs.c | 4 +- drivers/gpu/drm/i915/display/intel_dp.c | 10 +- drivers/gpu/drm/i915/display/intel_tv.c | 3 - drivers/gpu/drm/mcde/mcde_dsi.c | 6 +- drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 4 +- drivers/gpu/drm/mediatek/mtk_hdmi.c | 2 +- drivers/gpu/drm/meson/meson_venc_cvbs.c | 2 - drivers/gpu/drm/nouveau/nouveau_connector.c | 5 +- drivers/gpu/drm/panel/panel-arm-versatile.c | 4 - .../gpu/drm/panel/panel-asus-z00t-tm5p5-n35596.c | 1 - drivers/gpu/drm/panel/panel-boe-himax8279d.c | 3 +- drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 7 +- drivers/gpu/drm/panel/panel-elida-kd35t133.c | 3 +- drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c | 3 +- .../gpu/drm/panel/panel-feiyang-fy07024di26a30d.c | 3 +- drivers/gpu/drm/panel/panel-ilitek-ili9322.c | 7 - drivers/gpu/drm/panel/panel-ilitek-ili9881c.c | 3 +- drivers/gpu/drm/panel/panel-innolux-p079zca.c | 4 +- drivers/gpu/drm/panel/panel-jdi-lt070me05000.c | 3 +- drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c | 3 +- drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c | 3 +- drivers/gpu/drm/panel/panel-lg-lb035q02.c | 1 - drivers/gpu/drm/panel/panel-lg-lg4573.c | 3 +- drivers/gpu/drm/panel/panel-nec-nl8048hl11.c | 1 - drivers/gpu/drm/panel/panel-novatek-nt35510.c | 1 - drivers/gpu/drm/panel/panel-novatek-nt39016.c | 2 - drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c | 1 - drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 3 +- drivers/gpu/drm/panel/panel-osd-osd101t2587-53ts.c | 3 +- .../gpu/drm/panel/panel-panasonic-vvx10f034n00.c | 3 +- .../gpu/drm/panel/panel-raspberrypi-touchscreen.c | 4 +- drivers/gpu/drm/panel/panel-raydium-rm67191.c | 3 +- drivers/gpu/drm/panel/panel-raydium-rm68200.c | 3 +- drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c | 5 +- drivers/gpu/drm/panel/panel-ronbo-rb070d30.c | 1 - drivers/gpu/drm/panel/panel-samsung-s6d16d0.c | 6 - drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c | 4 +- drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 3 +- drivers/gpu/drm/panel/panel-samsung-s6e63m0.c | 3 +- .../drm/panel/panel-samsung-s6e88a0-ams452ef01.c | 1 - drivers/gpu/drm/panel/panel-seiko-43wvf1g.c | 3 +- drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c | 3 +- drivers/gpu/drm/panel/panel-sharp-ls037v7dw01.c | 1 - drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c | 3 +- drivers/gpu/drm/panel/panel-simple.c | 91 +----- drivers/gpu/drm/panel/panel-sitronix-st7701.c | 2 +- drivers/gpu/drm/panel/panel-sitronix-st7789v.c | 3 +- drivers/gpu/drm/panel/panel-sony-acx424akp.c | 2 - drivers/gpu/drm/panel/panel-sony-acx565akm.c | 1 - drivers/gpu/drm/panel/panel-tpo-td028ttec1.c | 1 - drivers/gpu/drm/panel/panel-tpo-td043mtea1.c | 1 - drivers/gpu/drm/panel/panel-tpo-tpg110.c | 5 - drivers/gpu/drm/panel/panel-truly-nt35597.c | 1 - drivers/gpu/drm/panel/panel-visionox-rm69299.c | 1 - drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c | 3 +- drivers/gpu/drm/sti/sti_hda.c | 1 - drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 2 - include/drm/drm_modes.h | 12 +- 68 files changed, 218 insertions(+), 425 deletions(-) (limited to 'Documentation') diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 2ce52c5917f8..4c2b72f14316 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -327,26 +327,6 @@ Contact: Laurent Pinchart, Daniel Vetter Level: Intermediate (mostly because it is a huge tasks without good partial milestones, not technically itself that challenging) -Convert direct mode.vrefresh accesses to use drm_mode_vrefresh() ----------------------------------------------------------------- - -drm_display_mode.vrefresh isn't guaranteed to be populated. As such, using it -is risky and has been known to cause div-by-zero bugs. Fortunately, drm core -has helper which will use mode.vrefresh if it's !0 and will calculate it from -the timings when it's 0. - -Use simple search/replace, or (more fun) cocci to replace instances of direct -vrefresh access with a call to the helper. Check out -https://lists.freedesktop.org/archives/dri-devel/2019-January/205186.html for -inspiration. - -Once all instances of vrefresh have been converted, remove vrefresh from -drm_display_mode to avoid future use. - -Contact: Sean Paul - -Level: Starter - connector register/unregister fixes ----------------------------------- diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c index 6dad025f8da7..19d8ae59ea03 100644 --- a/drivers/gpu/drm/bridge/sii902x.c +++ b/drivers/gpu/drm/bridge/sii902x.c @@ -360,7 +360,7 @@ static void sii902x_bridge_mode_set(struct drm_bridge *bridge, buf[0] = pixel_clock_10kHz & 0xff; buf[1] = pixel_clock_10kHz >> 8; - buf[2] = adj->vrefresh; + buf[2] = drm_mode_vrefresh(adj); buf[3] = 0x00; buf[4] = adj->hdisplay; buf[5] = adj->hdisplay >> 8; diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c index d0778bb159bc..b7e9e1c2564c 100644 --- a/drivers/gpu/drm/drm_client_modeset.c +++ b/drivers/gpu/drm/drm_client_modeset.c @@ -186,7 +186,7 @@ again: continue; if (cmdline_mode->refresh_specified) { - if (mode->vrefresh != cmdline_mode->refresh) + if (drm_mode_vrefresh(mode) != cmdline_mode->refresh) continue; } diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 3bd95c4b02eb..57cac677269d 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -719,662 +719,662 @@ static const struct drm_display_mode edid_cea_modes_1[] = { { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25175, 640, 656, 752, 800, 0, 480, 490, 492, 525, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 2 - 720x480@60Hz 4:3 */ { DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 27000, 720, 736, 798, 858, 0, 480, 489, 495, 525, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 3 - 720x480@60Hz 16:9 */ { DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 27000, 720, 736, 798, 858, 0, 480, 489, 495, 525, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 4 - 1280x720@60Hz 16:9 */ { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 1390, 1430, 1650, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 5 - 1920x1080i@60Hz 16:9 */ { DRM_MODE("1920x1080i", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2008, 2052, 2200, 0, 1080, 1084, 1094, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_INTERLACE), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 6 - 720(1440)x480i@60Hz 4:3 */ { DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 13500, 720, 739, 801, 858, 0, 480, 488, 494, 525, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 7 - 720(1440)x480i@60Hz 16:9 */ { DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 13500, 720, 739, 801, 858, 0, 480, 488, 494, 525, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 8 - 720(1440)x240@60Hz 4:3 */ { DRM_MODE("720x240", DRM_MODE_TYPE_DRIVER, 13500, 720, 739, 801, 858, 0, 240, 244, 247, 262, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_DBLCLK), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 9 - 720(1440)x240@60Hz 16:9 */ { DRM_MODE("720x240", DRM_MODE_TYPE_DRIVER, 13500, 720, 739, 801, 858, 0, 240, 244, 247, 262, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_DBLCLK), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 10 - 2880x480i@60Hz 4:3 */ { DRM_MODE("2880x480i", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2956, 3204, 3432, 0, 480, 488, 494, 525, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_INTERLACE), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 11 - 2880x480i@60Hz 16:9 */ { DRM_MODE("2880x480i", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2956, 3204, 3432, 0, 480, 488, 494, 525, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_INTERLACE), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 12 - 2880x240@60Hz 4:3 */ { DRM_MODE("2880x240", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2956, 3204, 3432, 0, 240, 244, 247, 262, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 13 - 2880x240@60Hz 16:9 */ { DRM_MODE("2880x240", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2956, 3204, 3432, 0, 240, 244, 247, 262, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 14 - 1440x480@60Hz 4:3 */ { DRM_MODE("1440x480", DRM_MODE_TYPE_DRIVER, 54000, 1440, 1472, 1596, 1716, 0, 480, 489, 495, 525, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 15 - 1440x480@60Hz 16:9 */ { DRM_MODE("1440x480", DRM_MODE_TYPE_DRIVER, 54000, 1440, 1472, 1596, 1716, 0, 480, 489, 495, 525, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 16 - 1920x1080@60Hz 16:9 */ { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2008, 2052, 2200, 0, 1080, 1084, 1089, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 17 - 720x576@50Hz 4:3 */ { DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 27000, 720, 732, 796, 864, 0, 576, 581, 586, 625, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 18 - 720x576@50Hz 16:9 */ { DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 27000, 720, 732, 796, 864, 0, 576, 581, 586, 625, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 19 - 1280x720@50Hz 16:9 */ { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 1720, 1760, 1980, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 20 - 1920x1080i@50Hz 16:9 */ { DRM_MODE("1920x1080i", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2448, 2492, 2640, 0, 1080, 1084, 1094, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_INTERLACE), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 21 - 720(1440)x576i@50Hz 4:3 */ { DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 13500, 720, 732, 795, 864, 0, 576, 580, 586, 625, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 22 - 720(1440)x576i@50Hz 16:9 */ { DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 13500, 720, 732, 795, 864, 0, 576, 580, 586, 625, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 23 - 720(1440)x288@50Hz 4:3 */ { DRM_MODE("720x288", DRM_MODE_TYPE_DRIVER, 13500, 720, 732, 795, 864, 0, 288, 290, 293, 312, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_DBLCLK), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 24 - 720(1440)x288@50Hz 16:9 */ { DRM_MODE("720x288", DRM_MODE_TYPE_DRIVER, 13500, 720, 732, 795, 864, 0, 288, 290, 293, 312, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_DBLCLK), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 25 - 2880x576i@50Hz 4:3 */ { DRM_MODE("2880x576i", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2928, 3180, 3456, 0, 576, 580, 586, 625, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_INTERLACE), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 26 - 2880x576i@50Hz 16:9 */ { DRM_MODE("2880x576i", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2928, 3180, 3456, 0, 576, 580, 586, 625, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_INTERLACE), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 27 - 2880x288@50Hz 4:3 */ { DRM_MODE("2880x288", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2928, 3180, 3456, 0, 288, 290, 293, 312, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 28 - 2880x288@50Hz 16:9 */ { DRM_MODE("2880x288", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2928, 3180, 3456, 0, 288, 290, 293, 312, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 29 - 1440x576@50Hz 4:3 */ { DRM_MODE("1440x576", DRM_MODE_TYPE_DRIVER, 54000, 1440, 1464, 1592, 1728, 0, 576, 581, 586, 625, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 30 - 1440x576@50Hz 16:9 */ { DRM_MODE("1440x576", DRM_MODE_TYPE_DRIVER, 54000, 1440, 1464, 1592, 1728, 0, 576, 581, 586, 625, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 31 - 1920x1080@50Hz 16:9 */ { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2448, 2492, 2640, 0, 1080, 1084, 1089, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 32 - 1920x1080@24Hz 16:9 */ { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2558, 2602, 2750, 0, 1080, 1084, 1089, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 24, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 33 - 1920x1080@25Hz 16:9 */ { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2448, 2492, 2640, 0, 1080, 1084, 1089, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 25, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 34 - 1920x1080@30Hz 16:9 */ { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2008, 2052, 2200, 0, 1080, 1084, 1089, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 30, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 35 - 2880x480@60Hz 4:3 */ { DRM_MODE("2880x480", DRM_MODE_TYPE_DRIVER, 108000, 2880, 2944, 3192, 3432, 0, 480, 489, 495, 525, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 36 - 2880x480@60Hz 16:9 */ { DRM_MODE("2880x480", DRM_MODE_TYPE_DRIVER, 108000, 2880, 2944, 3192, 3432, 0, 480, 489, 495, 525, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 37 - 2880x576@50Hz 4:3 */ { DRM_MODE("2880x576", DRM_MODE_TYPE_DRIVER, 108000, 2880, 2928, 3184, 3456, 0, 576, 581, 586, 625, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 38 - 2880x576@50Hz 16:9 */ { DRM_MODE("2880x576", DRM_MODE_TYPE_DRIVER, 108000, 2880, 2928, 3184, 3456, 0, 576, 581, 586, 625, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 39 - 1920x1080i@50Hz 16:9 */ { DRM_MODE("1920x1080i", DRM_MODE_TYPE_DRIVER, 72000, 1920, 1952, 2120, 2304, 0, 1080, 1126, 1136, 1250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_INTERLACE), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 40 - 1920x1080i@100Hz 16:9 */ { DRM_MODE("1920x1080i", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2448, 2492, 2640, 0, 1080, 1084, 1094, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_INTERLACE), - .vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 41 - 1280x720@100Hz 16:9 */ { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 148500, 1280, 1720, 1760, 1980, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 42 - 720x576@100Hz 4:3 */ { DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 54000, 720, 732, 796, 864, 0, 576, 581, 586, 625, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 43 - 720x576@100Hz 16:9 */ { DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 54000, 720, 732, 796, 864, 0, 576, 581, 586, 625, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 44 - 720(1440)x576i@100Hz 4:3 */ { DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 27000, 720, 732, 795, 864, 0, 576, 580, 586, 625, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), - .vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 45 - 720(1440)x576i@100Hz 16:9 */ { DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 27000, 720, 732, 795, 864, 0, 576, 580, 586, 625, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), - .vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 46 - 1920x1080i@120Hz 16:9 */ { DRM_MODE("1920x1080i", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2008, 2052, 2200, 0, 1080, 1084, 1094, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_INTERLACE), - .vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 47 - 1280x720@120Hz 16:9 */ { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 148500, 1280, 1390, 1430, 1650, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 48 - 720x480@120Hz 4:3 */ { DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 54000, 720, 736, 798, 858, 0, 480, 489, 495, 525, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 49 - 720x480@120Hz 16:9 */ { DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 54000, 720, 736, 798, 858, 0, 480, 489, 495, 525, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 50 - 720(1440)x480i@120Hz 4:3 */ { DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 27000, 720, 739, 801, 858, 0, 480, 488, 494, 525, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), - .vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 51 - 720(1440)x480i@120Hz 16:9 */ { DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 27000, 720, 739, 801, 858, 0, 480, 488, 494, 525, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), - .vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 52 - 720x576@200Hz 4:3 */ { DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 108000, 720, 732, 796, 864, 0, 576, 581, 586, 625, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 200, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 53 - 720x576@200Hz 16:9 */ { DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 108000, 720, 732, 796, 864, 0, 576, 581, 586, 625, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 200, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 54 - 720(1440)x576i@200Hz 4:3 */ { DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 54000, 720, 732, 795, 864, 0, 576, 580, 586, 625, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), - .vrefresh = 200, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 55 - 720(1440)x576i@200Hz 16:9 */ { DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 54000, 720, 732, 795, 864, 0, 576, 580, 586, 625, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), - .vrefresh = 200, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 56 - 720x480@240Hz 4:3 */ { DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 108000, 720, 736, 798, 858, 0, 480, 489, 495, 525, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 240, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 57 - 720x480@240Hz 16:9 */ { DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 108000, 720, 736, 798, 858, 0, 480, 489, 495, 525, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), - .vrefresh = 240, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 58 - 720(1440)x480i@240Hz 4:3 */ { DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 54000, 720, 739, 801, 858, 0, 480, 488, 494, 525, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), - .vrefresh = 240, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, /* 59 - 720(1440)x480i@240Hz 16:9 */ { DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 54000, 720, 739, 801, 858, 0, 480, 488, 494, 525, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), - .vrefresh = 240, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 60 - 1280x720@24Hz 16:9 */ { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 59400, 1280, 3040, 3080, 3300, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 24, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 61 - 1280x720@25Hz 16:9 */ { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 3700, 3740, 3960, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 25, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 62 - 1280x720@30Hz 16:9 */ { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 3040, 3080, 3300, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 30, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 63 - 1920x1080@120Hz 16:9 */ { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 297000, 1920, 2008, 2052, 2200, 0, 1080, 1084, 1089, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 64 - 1920x1080@100Hz 16:9 */ { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 297000, 1920, 2448, 2492, 2640, 0, 1080, 1084, 1089, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 65 - 1280x720@24Hz 64:27 */ { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 59400, 1280, 3040, 3080, 3300, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 24, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 66 - 1280x720@25Hz 64:27 */ { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 3700, 3740, 3960, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 25, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 67 - 1280x720@30Hz 64:27 */ { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 3040, 3080, 3300, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 30, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 68 - 1280x720@50Hz 64:27 */ { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 1720, 1760, 1980, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 69 - 1280x720@60Hz 64:27 */ { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 1390, 1430, 1650, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 70 - 1280x720@100Hz 64:27 */ { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 148500, 1280, 1720, 1760, 1980, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 71 - 1280x720@120Hz 64:27 */ { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 148500, 1280, 1390, 1430, 1650, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 72 - 1920x1080@24Hz 64:27 */ { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2558, 2602, 2750, 0, 1080, 1084, 1089, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 24, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 73 - 1920x1080@25Hz 64:27 */ { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2448, 2492, 2640, 0, 1080, 1084, 1089, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 25, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 74 - 1920x1080@30Hz 64:27 */ { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2008, 2052, 2200, 0, 1080, 1084, 1089, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 30, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 75 - 1920x1080@50Hz 64:27 */ { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2448, 2492, 2640, 0, 1080, 1084, 1089, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 76 - 1920x1080@60Hz 64:27 */ { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2008, 2052, 2200, 0, 1080, 1084, 1089, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 77 - 1920x1080@100Hz 64:27 */ { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 297000, 1920, 2448, 2492, 2640, 0, 1080, 1084, 1089, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 78 - 1920x1080@120Hz 64:27 */ { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 297000, 1920, 2008, 2052, 2200, 0, 1080, 1084, 1089, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 79 - 1680x720@24Hz 64:27 */ { DRM_MODE("1680x720", DRM_MODE_TYPE_DRIVER, 59400, 1680, 3040, 3080, 3300, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 24, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 80 - 1680x720@25Hz 64:27 */ { DRM_MODE("1680x720", DRM_MODE_TYPE_DRIVER, 59400, 1680, 2908, 2948, 3168, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 25, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 81 - 1680x720@30Hz 64:27 */ { DRM_MODE("1680x720", DRM_MODE_TYPE_DRIVER, 59400, 1680, 2380, 2420, 2640, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 30, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 82 - 1680x720@50Hz 64:27 */ { DRM_MODE("1680x720", DRM_MODE_TYPE_DRIVER, 82500, 1680, 1940, 1980, 2200, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 83 - 1680x720@60Hz 64:27 */ { DRM_MODE("1680x720", DRM_MODE_TYPE_DRIVER, 99000, 1680, 1940, 1980, 2200, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 84 - 1680x720@100Hz 64:27 */ { DRM_MODE("1680x720", DRM_MODE_TYPE_DRIVER, 165000, 1680, 1740, 1780, 2000, 0, 720, 725, 730, 825, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 85 - 1680x720@120Hz 64:27 */ { DRM_MODE("1680x720", DRM_MODE_TYPE_DRIVER, 198000, 1680, 1740, 1780, 2000, 0, 720, 725, 730, 825, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 86 - 2560x1080@24Hz 64:27 */ { DRM_MODE("2560x1080", DRM_MODE_TYPE_DRIVER, 99000, 2560, 3558, 3602, 3750, 0, 1080, 1084, 1089, 1100, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 24, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 87 - 2560x1080@25Hz 64:27 */ { DRM_MODE("2560x1080", DRM_MODE_TYPE_DRIVER, 90000, 2560, 3008, 3052, 3200, 0, 1080, 1084, 1089, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 25, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 88 - 2560x1080@30Hz 64:27 */ { DRM_MODE("2560x1080", DRM_MODE_TYPE_DRIVER, 118800, 2560, 3328, 3372, 3520, 0, 1080, 1084, 1089, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 30, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 89 - 2560x1080@50Hz 64:27 */ { DRM_MODE("2560x1080", DRM_MODE_TYPE_DRIVER, 185625, 2560, 3108, 3152, 3300, 0, 1080, 1084, 1089, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 90 - 2560x1080@60Hz 64:27 */ { DRM_MODE("2560x1080", DRM_MODE_TYPE_DRIVER, 198000, 2560, 2808, 2852, 3000, 0, 1080, 1084, 1089, 1100, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 91 - 2560x1080@100Hz 64:27 */ { DRM_MODE("2560x1080", DRM_MODE_TYPE_DRIVER, 371250, 2560, 2778, 2822, 2970, 0, 1080, 1084, 1089, 1250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 92 - 2560x1080@120Hz 64:27 */ { DRM_MODE("2560x1080", DRM_MODE_TYPE_DRIVER, 495000, 2560, 3108, 3152, 3300, 0, 1080, 1084, 1089, 1250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 93 - 3840x2160@24Hz 16:9 */ { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000, 3840, 5116, 5204, 5500, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 24, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 94 - 3840x2160@25Hz 16:9 */ { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000, 3840, 4896, 4984, 5280, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 25, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 95 - 3840x2160@30Hz 16:9 */ { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000, 3840, 4016, 4104, 4400, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 30, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 96 - 3840x2160@50Hz 16:9 */ { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 594000, 3840, 4896, 4984, 5280, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 97 - 3840x2160@60Hz 16:9 */ { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 594000, 3840, 4016, 4104, 4400, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 98 - 4096x2160@24Hz 256:135 */ { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 297000, 4096, 5116, 5204, 5500, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 24, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, /* 99 - 4096x2160@25Hz 256:135 */ { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 297000, 4096, 5064, 5152, 5280, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 25, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, /* 100 - 4096x2160@30Hz 256:135 */ { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 297000, 4096, 4184, 4272, 4400, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 30, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, /* 101 - 4096x2160@50Hz 256:135 */ { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 594000, 4096, 5064, 5152, 5280, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, /* 102 - 4096x2160@60Hz 256:135 */ { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 594000, 4096, 4184, 4272, 4400, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, /* 103 - 3840x2160@24Hz 64:27 */ { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000, 3840, 5116, 5204, 5500, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 24, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 104 - 3840x2160@25Hz 64:27 */ { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000, 3840, 4896, 4984, 5280, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 25, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 105 - 3840x2160@30Hz 64:27 */ { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000, 3840, 4016, 4104, 4400, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 30, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 106 - 3840x2160@50Hz 64:27 */ { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 594000, 3840, 4896, 4984, 5280, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 107 - 3840x2160@60Hz 64:27 */ { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 594000, 3840, 4016, 4104, 4400, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 108 - 1280x720@48Hz 16:9 */ { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 90000, 1280, 2240, 2280, 2500, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 48, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 109 - 1280x720@48Hz 64:27 */ { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 90000, 1280, 2240, 2280, 2500, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 48, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 110 - 1680x720@48Hz 64:27 */ { DRM_MODE("1680x720", DRM_MODE_TYPE_DRIVER, 99000, 1680, 2490, 2530, 2750, 0, 720, 725, 730, 750, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 48, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 111 - 1920x1080@48Hz 16:9 */ { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2558, 2602, 2750, 0, 1080, 1084, 1089, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 48, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 112 - 1920x1080@48Hz 64:27 */ { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2558, 2602, 2750, 0, 1080, 1084, 1089, 1125, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 48, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 113 - 2560x1080@48Hz 64:27 */ { DRM_MODE("2560x1080", DRM_MODE_TYPE_DRIVER, 198000, 2560, 3558, 3602, 3750, 0, 1080, 1084, 1089, 1100, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 48, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 114 - 3840x2160@48Hz 16:9 */ { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 594000, 3840, 5116, 5204, 5500, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 48, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 115 - 4096x2160@48Hz 256:135 */ { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 594000, 4096, 5116, 5204, 5500, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 48, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, /* 116 - 3840x2160@48Hz 64:27 */ { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 594000, 3840, 5116, 5204, 5500, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 48, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 117 - 3840x2160@100Hz 16:9 */ { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 1188000, 3840, 4896, 4984, 5280, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 118 - 3840x2160@120Hz 16:9 */ { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 1188000, 3840, 4016, 4104, 4400, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 119 - 3840x2160@100Hz 64:27 */ { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 1188000, 3840, 4896, 4984, 5280, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 120 - 3840x2160@120Hz 64:27 */ { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 1188000, 3840, 4016, 4104, 4400, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 121 - 5120x2160@24Hz 64:27 */ { DRM_MODE("5120x2160", DRM_MODE_TYPE_DRIVER, 396000, 5120, 7116, 7204, 7500, 0, 2160, 2168, 2178, 2200, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 24, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 122 - 5120x2160@25Hz 64:27 */ { DRM_MODE("5120x2160", DRM_MODE_TYPE_DRIVER, 396000, 5120, 6816, 6904, 7200, 0, 2160, 2168, 2178, 2200, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 25, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 123 - 5120x2160@30Hz 64:27 */ { DRM_MODE("5120x2160", DRM_MODE_TYPE_DRIVER, 396000, 5120, 5784, 5872, 6000, 0, 2160, 2168, 2178, 2200, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 30, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 124 - 5120x2160@48Hz 64:27 */ { DRM_MODE("5120x2160", DRM_MODE_TYPE_DRIVER, 742500, 5120, 5866, 5954, 6250, 0, 2160, 2168, 2178, 2475, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 48, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 125 - 5120x2160@50Hz 64:27 */ { DRM_MODE("5120x2160", DRM_MODE_TYPE_DRIVER, 742500, 5120, 6216, 6304, 6600, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 126 - 5120x2160@60Hz 64:27 */ { DRM_MODE("5120x2160", DRM_MODE_TYPE_DRIVER, 742500, 5120, 5284, 5372, 5500, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 127 - 5120x2160@100Hz 64:27 */ { DRM_MODE("5120x2160", DRM_MODE_TYPE_DRIVER, 1485000, 5120, 6216, 6304, 6600, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, }; /* @@ -1387,137 +1387,137 @@ static const struct drm_display_mode edid_cea_modes_193[] = { { DRM_MODE("5120x2160", DRM_MODE_TYPE_DRIVER, 1485000, 5120, 5284, 5372, 5500, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 194 - 7680x4320@24Hz 16:9 */ { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 1188000, 7680, 10232, 10408, 11000, 0, 4320, 4336, 4356, 4500, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 24, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 195 - 7680x4320@25Hz 16:9 */ { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 1188000, 7680, 10032, 10208, 10800, 0, 4320, 4336, 4356, 4400, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 25, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 196 - 7680x4320@30Hz 16:9 */ { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 1188000, 7680, 8232, 8408, 9000, 0, 4320, 4336, 4356, 4400, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 30, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 197 - 7680x4320@48Hz 16:9 */ { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 2376000, 7680, 10232, 10408, 11000, 0, 4320, 4336, 4356, 4500, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 48, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 198 - 7680x4320@50Hz 16:9 */ { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 2376000, 7680, 10032, 10208, 10800, 0, 4320, 4336, 4356, 4400, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 199 - 7680x4320@60Hz 16:9 */ { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 2376000, 7680, 8232, 8408, 9000, 0, 4320, 4336, 4356, 4400, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 200 - 7680x4320@100Hz 16:9 */ { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 4752000, 7680, 9792, 9968, 10560, 0, 4320, 4336, 4356, 4500, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 201 - 7680x4320@120Hz 16:9 */ { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 4752000, 7680, 8032, 8208, 8800, 0, 4320, 4336, 4356, 4500, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 202 - 7680x4320@24Hz 64:27 */ { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 1188000, 7680, 10232, 10408, 11000, 0, 4320, 4336, 4356, 4500, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 24, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 203 - 7680x4320@25Hz 64:27 */ { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 1188000, 7680, 10032, 10208, 10800, 0, 4320, 4336, 4356, 4400, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 25, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 204 - 7680x4320@30Hz 64:27 */ { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 1188000, 7680, 8232, 8408, 9000, 0, 4320, 4336, 4356, 4400, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 30, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 205 - 7680x4320@48Hz 64:27 */ { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 2376000, 7680, 10232, 10408, 11000, 0, 4320, 4336, 4356, 4500, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 48, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 206 - 7680x4320@50Hz 64:27 */ { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 2376000, 7680, 10032, 10208, 10800, 0, 4320, 4336, 4356, 4400, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 207 - 7680x4320@60Hz 64:27 */ { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 2376000, 7680, 8232, 8408, 9000, 0, 4320, 4336, 4356, 4400, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 208 - 7680x4320@100Hz 64:27 */ { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 4752000, 7680, 9792, 9968, 10560, 0, 4320, 4336, 4356, 4500, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 209 - 7680x4320@120Hz 64:27 */ { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 4752000, 7680, 8032, 8208, 8800, 0, 4320, 4336, 4356, 4500, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 210 - 10240x4320@24Hz 64:27 */ { DRM_MODE("10240x4320", DRM_MODE_TYPE_DRIVER, 1485000, 10240, 11732, 11908, 12500, 0, 4320, 4336, 4356, 4950, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 24, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 211 - 10240x4320@25Hz 64:27 */ { DRM_MODE("10240x4320", DRM_MODE_TYPE_DRIVER, 1485000, 10240, 12732, 12908, 13500, 0, 4320, 4336, 4356, 4400, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 25, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 212 - 10240x4320@30Hz 64:27 */ { DRM_MODE("10240x4320", DRM_MODE_TYPE_DRIVER, 1485000, 10240, 10528, 10704, 11000, 0, 4320, 4336, 4356, 4500, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 30, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 213 - 10240x4320@48Hz 64:27 */ { DRM_MODE("10240x4320", DRM_MODE_TYPE_DRIVER, 2970000, 10240, 11732, 11908, 12500, 0, 4320, 4336, 4356, 4950, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 48, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 214 - 10240x4320@50Hz 64:27 */ { DRM_MODE("10240x4320", DRM_MODE_TYPE_DRIVER, 2970000, 10240, 12732, 12908, 13500, 0, 4320, 4336, 4356, 4400, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 215 - 10240x4320@60Hz 64:27 */ { DRM_MODE("10240x4320", DRM_MODE_TYPE_DRIVER, 2970000, 10240, 10528, 10704, 11000, 0, 4320, 4336, 4356, 4500, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 216 - 10240x4320@100Hz 64:27 */ { DRM_MODE("10240x4320", DRM_MODE_TYPE_DRIVER, 5940000, 10240, 12432, 12608, 13200, 0, 4320, 4336, 4356, 4500, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 217 - 10240x4320@120Hz 64:27 */ { DRM_MODE("10240x4320", DRM_MODE_TYPE_DRIVER, 5940000, 10240, 10528, 10704, 11000, 0, 4320, 4336, 4356, 4500, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, /* 218 - 4096x2160@100Hz 256:135 */ { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 1188000, 4096, 4896, 4984, 5280, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, /* 219 - 4096x2160@120Hz 256:135 */ { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 1188000, 4096, 4184, 4272, 4400, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, }; /* @@ -1531,25 +1531,25 @@ static const struct drm_display_mode edid_4k_modes[] = { 3840, 4016, 4104, 4400, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 30, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 2 - 3840x2160@25Hz */ { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000, 3840, 4896, 4984, 5280, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 25, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 3 - 3840x2160@24Hz */ { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000, 3840, 5116, 5204, 5500, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 24, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, /* 4 - 4096x2160@24Hz (SMPTE) */ { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 297000, 4096, 5116, 5204, 5500, 0, 2160, 2168, 2178, 2250, 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), - .vrefresh = 24, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, + .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, }; /*** DDC fetch and block validation ***/ @@ -2145,10 +2145,8 @@ static void edid_fixup_preferred(struct drm_connector *connector, if (MODE_SIZE(cur_mode) > MODE_SIZE(preferred_mode)) preferred_mode = cur_mode; - cur_vrefresh = cur_mode->vrefresh ? - cur_mode->vrefresh : drm_mode_vrefresh(cur_mode); - preferred_vrefresh = preferred_mode->vrefresh ? - preferred_mode->vrefresh : drm_mode_vrefresh(preferred_mode); + cur_vrefresh = drm_mode_vrefresh(cur_mode); + preferred_vrefresh = drm_mode_vrefresh(preferred_mode); /* At a given size, try to get closest to target refresh */ if ((MODE_SIZE(cur_mode) == MODE_SIZE(preferred_mode)) && MODE_REFRESH_DIFF(cur_vrefresh, target_refresh) < @@ -2653,7 +2651,6 @@ set_size: } mode->type = DRM_MODE_TYPE_DRIVER; - mode->vrefresh = drm_mode_vrefresh(mode); drm_mode_set_name(mode); return mode; @@ -3298,7 +3295,7 @@ cea_mode_alternate_clock(const struct drm_display_mode *cea_mode) { unsigned int clock = cea_mode->clock; - if (cea_mode->vrefresh % 6 != 0) + if (drm_mode_vrefresh(cea_mode) % 6 != 0) return clock; /* @@ -3625,8 +3622,6 @@ drm_display_mode_from_vic_index(struct drm_connector *connector, if (!newmode) return NULL; - newmode->vrefresh = 0; - return newmode; } @@ -5161,7 +5156,6 @@ static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *d if (timings->flags & 0x80) mode->type |= DRM_MODE_TYPE_PREFERRED; - mode->vrefresh = drm_mode_vrefresh(mode); drm_mode_set_name(mode); return mode; diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index fec1c33b3045..e3d5f011f7bd 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -759,9 +759,7 @@ int drm_mode_vrefresh(const struct drm_display_mode *mode) { int refresh = 0; - if (mode->vrefresh > 0) - refresh = mode->vrefresh; - else if (mode->htotal > 0 && mode->vtotal > 0) { + if (mode->htotal > 0 && mode->vtotal > 0) { unsigned int num, den; num = mode->clock * 1000; @@ -1308,7 +1306,7 @@ static int drm_mode_compare(void *priv, struct list_head *lh_a, struct list_head if (diff) return diff; - diff = b->vrefresh - a->vrefresh; + diff = drm_mode_vrefresh(b) - drm_mode_vrefresh(a); if (diff) return diff; @@ -1921,7 +1919,7 @@ void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out, out->vsync_end = in->vsync_end; out->vtotal = in->vtotal; out->vscan = in->vscan; - out->vrefresh = in->vrefresh; + out->vrefresh = drm_mode_vrefresh(in); out->flags = in->flags; out->type = in->type; @@ -1981,7 +1979,6 @@ int drm_mode_convert_umode(struct drm_device *dev, out->vsync_end = in->vsync_end; out->vtotal = in->vtotal; out->vscan = in->vscan; - out->vrefresh = in->vrefresh; out->flags = in->flags; /* * Old xf86-video-vmware (possibly others too) used to diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c index 466dfbba8256..26e997f1524f 100644 --- a/drivers/gpu/drm/drm_probe_helper.c +++ b/drivers/gpu/drm/drm_probe_helper.c @@ -534,9 +534,6 @@ prune: if (list_empty(&connector->modes)) return 0; - list_for_each_entry(mode, &connector->modes, head) - mode->vrefresh = drm_mode_vrefresh(mode); - drm_mode_sort(&connector->modes); DRM_DEBUG_KMS("[CONNECTOR:%d:%s] probed modes :\n", connector->base.id, diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 95dd399aa9cc..8c3f5b21eff4 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -921,7 +921,8 @@ static int hdmi_mode_valid(struct drm_connector *connector, DRM_DEV_DEBUG_KMS(hdata->dev, "xres=%d, yres=%d, refresh=%d, intl=%d clock=%d\n", - mode->hdisplay, mode->vdisplay, mode->vrefresh, + mode->hdisplay, mode->vdisplay, + drm_mode_vrefresh(mode), (mode->flags & DRM_MODE_FLAG_INTERLACE) ? true : false, mode->clock * 1000); @@ -1020,7 +1021,7 @@ static bool hdmi_mode_fixup(struct drm_encoder *encoder, DRM_DEV_DEBUG_KMS(dev->dev, "Adjusted Mode: [%d]x[%d] [%d]Hz\n", m->hdisplay, m->vdisplay, - m->vrefresh); + drm_mode_vrefresh(m)); drm_mode_copy(adjusted_mode, m); break; diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 21b726baedea..72f890529c12 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -1046,7 +1046,7 @@ static int mixer_mode_valid(struct exynos_drm_crtc *crtc, u32 w = mode->hdisplay, h = mode->vdisplay; DRM_DEV_DEBUG_KMS(ctx->dev, "xres=%d, yres=%d, refresh=%d, intl=%d\n", - w, h, mode->vrefresh, + w, h, drm_mode_vrefresh(mode), !!(mode->flags & DRM_MODE_FLAG_INTERLACE)); if (ctx->mxr_ver == MXR_VER_128_0_0_184) diff --git a/drivers/gpu/drm/i2c/ch7006_mode.c b/drivers/gpu/drm/i2c/ch7006_mode.c index bb5f67f10edb..6afe6d0ee630 100644 --- a/drivers/gpu/drm/i2c/ch7006_mode.c +++ b/drivers/gpu/drm/i2c/ch7006_mode.c @@ -121,7 +121,6 @@ const struct ch7006_tv_norm_info ch7006_tv_norms[] = { .vscan = 0, \ .flags = DRM_MODE_FLAG_##hsynp##HSYNC | \ DRM_MODE_FLAG_##vsynp##VSYNC, \ - .vrefresh = 0, \ }, \ .enc_hdisp = e_hd, \ .enc_vdisp = e_vd, \ diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c index ec7e943fd877..a9a5e619fda8 100644 --- a/drivers/gpu/drm/i915/display/intel_display.c +++ b/drivers/gpu/drm/i915/display/intel_display.c @@ -8891,7 +8891,6 @@ void intel_mode_from_pipe_config(struct drm_display_mode *mode, mode->clock = pipe_config->hw.adjusted_mode.crtc_clock; - mode->vrefresh = drm_mode_vrefresh(mode); drm_mode_set_name(mode); } diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c index bdeea2e02642..bbf92ae69407 100644 --- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c +++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c @@ -1098,10 +1098,10 @@ static void drrs_status_per_crtc(struct seq_file *m, seq_puts(m, "\n\t\t"); if (drrs->refresh_rate_type == DRRS_HIGH_RR) { seq_puts(m, "DRRS_State: DRRS_HIGH_RR\n"); - vrefresh = panel->fixed_mode->vrefresh; + vrefresh = drm_mode_vrefresh(panel->fixed_mode); } else if (drrs->refresh_rate_type == DRRS_LOW_RR) { seq_puts(m, "DRRS_State: DRRS_LOW_RR\n"); - vrefresh = panel->downclock_mode->vrefresh; + vrefresh = drm_mode_vrefresh(panel->downclock_mode); } else { seq_printf(m, "DRRS_State: Unknown(%d)\n", drrs->refresh_rate_type); diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index d5aa85e57514..571009f158b7 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -7356,7 +7356,7 @@ static void intel_dp_set_drrs_state(struct drm_i915_private *dev_priv, return; } - if (intel_dp->attached_connector->panel.downclock_mode->vrefresh == + if (drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode) == refresh_rate) index = DRRS_LOW_RR; @@ -7469,7 +7469,7 @@ void intel_edp_drrs_disable(struct intel_dp *intel_dp, if (dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) intel_dp_set_drrs_state(dev_priv, old_crtc_state, - intel_dp->attached_connector->panel.fixed_mode->vrefresh); + drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode)); dev_priv->drrs.dp = NULL; mutex_unlock(&dev_priv->drrs.mutex); @@ -7502,7 +7502,7 @@ static void intel_edp_drrs_downclock_work(struct work_struct *work) struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc; intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config, - intel_dp->attached_connector->panel.downclock_mode->vrefresh); + drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode)); } unlock: @@ -7548,7 +7548,7 @@ void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv, /* invalidate means busy screen hence upclock */ if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config, - intel_dp->attached_connector->panel.fixed_mode->vrefresh); + drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode)); mutex_unlock(&dev_priv->drrs.mutex); } @@ -7594,7 +7594,7 @@ void intel_edp_drrs_flush(struct drm_i915_private *dev_priv, /* flush means busy screen hence upclock */ if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config, - intel_dp->attached_connector->panel.fixed_mode->vrefresh); + drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode)); /* * flush also means no more activity hence schedule downclock, if all diff --git a/drivers/gpu/drm/i915/display/intel_tv.c b/drivers/gpu/drm/i915/display/intel_tv.c index d2e3a3a323e9..193067fd1b2b 100644 --- a/drivers/gpu/drm/i915/display/intel_tv.c +++ b/drivers/gpu/drm/i915/display/intel_tv.c @@ -1036,9 +1036,6 @@ intel_tv_mode_to_mode(struct drm_display_mode *mode, /* TV has it's own notion of sync and other mode flags, so clear them. */ mode->flags = 0; - mode->vrefresh = 0; - mode->vrefresh = drm_mode_vrefresh(mode); - snprintf(mode->name, sizeof(mode->name), "%dx%d%c (%s)", mode->hdisplay, mode->vdisplay, diff --git a/drivers/gpu/drm/mcde/mcde_dsi.c b/drivers/gpu/drm/mcde/mcde_dsi.c index f303369305a3..ed28eaa42251 100644 --- a/drivers/gpu/drm/mcde/mcde_dsi.c +++ b/drivers/gpu/drm/mcde/mcde_dsi.c @@ -538,7 +538,7 @@ static void mcde_dsi_setup_video_mode(struct mcde_dsi *d, */ /* (ps/s) / (pixels/s) = ps/pixels */ pclk = DIV_ROUND_UP_ULL(1000000000000, - (mode->vrefresh * mode->htotal * mode->vtotal)); + (drm_mode_vrefresh(mode) * mode->htotal * mode->vtotal)); dev_dbg(d->dev, "picoseconds between two pixels: %llu\n", pclk); @@ -568,7 +568,7 @@ static void mcde_dsi_setup_video_mode(struct mcde_dsi *d, bpl *= d->mdsi->lanes; dev_dbg(d->dev, "calculated bytes per line: %llu @ %d Hz with HS %lu Hz\n", - bpl, mode->vrefresh, d->mdsi->hs_rate); + bpl, drm_mode_vrefresh(mode), d->mdsi->hs_rate); /* * 6 is header + checksum, header = 4 bytes, checksum = 2 bytes @@ -644,7 +644,7 @@ static void mcde_dsi_setup_video_mode(struct mcde_dsi *d, dev_err(d->dev, "video block does not fit on line!\n"); dev_err(d->dev, "calculated bytes per line: %llu @ %d Hz\n", - bpl, mode->vrefresh); + bpl, drm_mode_vrefresh(mode)); dev_err(d->dev, "bytes per line (blkline_pck) %u bytes\n", blkline_pck); diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c index fe85e487e477..a7dba4ced902 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c @@ -164,7 +164,7 @@ static void mtk_drm_crtc_mode_set_nofb(struct drm_crtc *crtc) state->pending_width = crtc->mode.hdisplay; state->pending_height = crtc->mode.vdisplay; - state->pending_vrefresh = crtc->mode.vrefresh; + state->pending_vrefresh = drm_mode_vrefresh(&crtc->mode); wmb(); /* Make sure the above parameters are set before update */ state->pending_config = true; } @@ -263,7 +263,7 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc) width = crtc->state->adjusted_mode.hdisplay; height = crtc->state->adjusted_mode.vdisplay; - vrefresh = crtc->state->adjusted_mode.vrefresh; + vrefresh = drm_mode_vrefresh(&crtc->state->adjusted_mode); drm_for_each_encoder(encoder, crtc->dev) { if (encoder->crtc != crtc) diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c index ff43a3d80410..86cf19f5c9ca 100644 --- a/drivers/gpu/drm/mediatek/mtk_hdmi.c +++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c @@ -1258,7 +1258,7 @@ static int mtk_hdmi_conn_mode_valid(struct drm_connector *conn, struct drm_bridge *next_bridge; dev_dbg(hdmi->dev, "xres=%d, yres=%d, refresh=%d, intl=%d clock=%d\n", - mode->hdisplay, mode->vdisplay, mode->vrefresh, + mode->hdisplay, mode->vdisplay, drm_mode_vrefresh(mode), !!(mode->flags & DRM_MODE_FLAG_INTERLACE), mode->clock * 1000); next_bridge = drm_bridge_get_next_bridge(&hdmi->bridge); diff --git a/drivers/gpu/drm/meson/meson_venc_cvbs.c b/drivers/gpu/drm/meson/meson_venc_cvbs.c index 541f9eb2a135..f1747fde1fe0 100644 --- a/drivers/gpu/drm/meson/meson_venc_cvbs.c +++ b/drivers/gpu/drm/meson/meson_venc_cvbs.c @@ -48,7 +48,6 @@ struct meson_cvbs_mode meson_cvbs_modes[MESON_CVBS_MODES_COUNT] = { DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 13500, 720, 732, 795, 864, 0, 576, 580, 586, 625, 0, DRM_MODE_FLAG_INTERLACE), - .vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, }, @@ -58,7 +57,6 @@ struct meson_cvbs_mode meson_cvbs_modes[MESON_CVBS_MODES_COUNT] = { DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 13500, 720, 739, 801, 858, 0, 480, 488, 494, 525, 0, DRM_MODE_FLAG_INTERLACE), - .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, }, diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 9a9a7f5003d3..ac80b1ac459c 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -59,7 +59,6 @@ nouveau_conn_native_mode(struct drm_connector *connector) int high_w = 0, high_h = 0, high_v = 0; list_for_each_entry(mode, &connector->probed_modes, head) { - mode->vrefresh = drm_mode_vrefresh(mode); if (helper->mode_valid(connector, mode) != MODE_OK || (mode->flags & DRM_MODE_FLAG_INTERLACE)) continue; @@ -80,12 +79,12 @@ nouveau_conn_native_mode(struct drm_connector *connector) continue; if (mode->hdisplay == high_w && mode->vdisplay == high_h && - mode->vrefresh < high_v) + drm_mode_vrefresh(mode) < high_v) continue; high_w = mode->hdisplay; high_h = mode->vdisplay; - high_v = mode->vrefresh; + high_v = drm_mode_vrefresh(mode); largest = mode; } diff --git a/drivers/gpu/drm/panel/panel-arm-versatile.c b/drivers/gpu/drm/panel/panel-arm-versatile.c index 41444a73c980..47b37fef7ee8 100644 --- a/drivers/gpu/drm/panel/panel-arm-versatile.c +++ b/drivers/gpu/drm/panel/panel-arm-versatile.c @@ -143,7 +143,6 @@ static const struct versatile_panel_type versatile_panels[] = { .vsync_start = 240 + 5, .vsync_end = 240 + 5 + 6, .vtotal = 240 + 5 + 6 + 5, - .vrefresh = 116, .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, }, }, @@ -167,7 +166,6 @@ static const struct versatile_panel_type versatile_panels[] = { .vsync_start = 480 + 11, .vsync_end = 480 + 11 + 2, .vtotal = 480 + 11 + 2 + 32, - .vrefresh = 60, .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, }, }, @@ -190,7 +188,6 @@ static const struct versatile_panel_type versatile_panels[] = { .vsync_start = 220 + 0, .vsync_end = 220 + 0 + 2, .vtotal = 220 + 0 + 2 + 1, - .vrefresh = 390, .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, }, .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE, @@ -214,7 +211,6 @@ static const struct versatile_panel_type versatile_panels[] = { .vsync_start = 320 + 2, .vsync_end = 320 + 2 + 2, .vtotal = 320 + 2 + 2 + 2, - .vrefresh = 116, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, }, .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE, diff --git a/drivers/gpu/drm/panel/panel-asus-z00t-tm5p5-n35596.c b/drivers/gpu/drm/panel/panel-asus-z00t-tm5p5-n35596.c index 39e0f0373f3c..9a5b7644d756 100644 --- a/drivers/gpu/drm/panel/panel-asus-z00t-tm5p5-n35596.c +++ b/drivers/gpu/drm/panel/panel-asus-z00t-tm5p5-n35596.c @@ -183,7 +183,6 @@ static const struct drm_display_mode tm5p5_nt35596_mode = { .vsync_start = 1920 + 4, .vsync_end = 1920 + 4 + 2, .vtotal = 1920 + 4 + 2 + 4, - .vrefresh = 60, .width_mm = 68, .height_mm = 121, }; diff --git a/drivers/gpu/drm/panel/panel-boe-himax8279d.c b/drivers/gpu/drm/panel/panel-boe-himax8279d.c index 74d58ee7d04c..7c27bd5e3486 100644 --- a/drivers/gpu/drm/panel/panel-boe-himax8279d.c +++ b/drivers/gpu/drm/panel/panel-boe-himax8279d.c @@ -229,7 +229,7 @@ static int boe_panel_get_modes(struct drm_panel *panel, mode = drm_mode_duplicate(connector->dev, m); if (!mode) { DRM_DEV_ERROR(pinfo->base.dev, "failed to add mode %ux%u@%u\n", - m->hdisplay, m->vdisplay, m->vrefresh); + m->hdisplay, m->vdisplay, drm_mode_vrefresh(m)); return -ENOMEM; } @@ -262,7 +262,6 @@ static const struct drm_display_mode default_display_mode = { .vsync_start = 1920 + 10, .vsync_end = 1920 + 10 + 14, .vtotal = 1920 + 10 + 14 + 4, - .vrefresh = 60, }; /* 8 inch */ diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c index 46fe1805c588..db5b866357f2 100644 --- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c @@ -594,7 +594,6 @@ static const struct drm_display_mode boe_tv101wum_nl6_default_mode = { .vsync_start = 1920 + 10, .vsync_end = 1920 + 10 + 14, .vtotal = 1920 + 10 + 14 + 4, - .vrefresh = 60, }; static const struct panel_desc boe_tv101wum_nl6_desc = { @@ -622,7 +621,6 @@ static const struct drm_display_mode auo_kd101n80_45na_default_mode = { .vsync_start = 1920 + 16, .vsync_end = 1920 + 16 + 4, .vtotal = 1920 + 16 + 4 + 16, - .vrefresh = 60, }; static const struct panel_desc auo_kd101n80_45na_desc = { @@ -650,7 +648,6 @@ static const struct drm_display_mode boe_tv101wum_n53_default_mode = { .vsync_start = 1920 + 20, .vsync_end = 1920 + 20 + 4, .vtotal = 1920 + 20 + 4 + 10, - .vrefresh = 60, .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, }; @@ -678,7 +675,6 @@ static const struct drm_display_mode auo_b101uan08_3_default_mode = { .vsync_start = 1920 + 34, .vsync_end = 1920 + 34 + 2, .vtotal = 1920 + 34 + 2 + 24, - .vrefresh = 60, .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, }; @@ -706,7 +702,6 @@ static const struct drm_display_mode boe_tv105wum_nw0_default_mode = { .vsync_start = 1920 + 20, .vsync_end = 1920 + 20 + 4, .vtotal = 1920 + 20 + 4 + 10, - .vrefresh = 60, .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, }; @@ -734,7 +729,7 @@ static int boe_panel_get_modes(struct drm_panel *panel, mode = drm_mode_duplicate(connector->dev, m); if (!mode) { dev_err(panel->dev, "failed to add mode %ux%u@%u\n", - m->hdisplay, m->vdisplay, m->vrefresh); + m->hdisplay, m->vdisplay, drm_mode_vrefresh(m)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-elida-kd35t133.c b/drivers/gpu/drm/panel/panel-elida-kd35t133.c index 711ded453c44..2338d22e23b1 100644 --- a/drivers/gpu/drm/panel/panel-elida-kd35t133.c +++ b/drivers/gpu/drm/panel/panel-elida-kd35t133.c @@ -197,7 +197,6 @@ static const struct drm_display_mode default_mode = { .vsync_start = 480 + 2, .vsync_end = 480 + 2 + 1, .vtotal = 480 + 2 + 1 + 2, - .vrefresh = 60, .clock = 17000, .width_mm = 42, .height_mm = 82, @@ -213,7 +212,7 @@ static int kd35t133_get_modes(struct drm_panel *panel, if (!mode) { DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n", default_mode.hdisplay, default_mode.vdisplay, - default_mode.vrefresh); + drm_mode_vrefresh(&default_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c b/drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c index fddbfddf6566..54610651ecdb 100644 --- a/drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c +++ b/drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c @@ -392,7 +392,6 @@ static int k101_im2ba02_unprepare(struct drm_panel *panel) static const struct drm_display_mode k101_im2ba02_default_mode = { .clock = 70000, - .vrefresh = 60, .hdisplay = 800, .hsync_start = 800 + 20, @@ -420,7 +419,7 @@ static int k101_im2ba02_get_modes(struct drm_panel *panel, DRM_DEV_ERROR(&ctx->dsi->dev, "failed to add mode %ux%ux@%u\n", k101_im2ba02_default_mode.hdisplay, k101_im2ba02_default_mode.vdisplay, - k101_im2ba02_default_mode.vrefresh); + drm_mode_vrefresh(&k101_im2ba02_default_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c index 95b789ab9d29..19a6274b10f5 100644 --- a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c +++ b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c @@ -153,7 +153,6 @@ static const struct drm_display_mode feiyang_default_mode = { .vsync_start = 600 + 12, .vsync_end = 600 + 12 + 2, .vtotal = 600 + 12 + 2 + 21, - .vrefresh = 60, .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, }; @@ -169,7 +168,7 @@ static int feiyang_get_modes(struct drm_panel *panel, DRM_DEV_ERROR(&ctx->dsi->dev, "failed to add mode %ux%ux@%u\n", feiyang_default_mode.hdisplay, feiyang_default_mode.vdisplay, - feiyang_default_mode.vrefresh); + drm_mode_vrefresh(&feiyang_default_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9322.c b/drivers/gpu/drm/panel/panel-ilitek-ili9322.c index 873b1c7059bd..67a64d1999f6 100644 --- a/drivers/gpu/drm/panel/panel-ilitek-ili9322.c +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9322.c @@ -549,7 +549,6 @@ static const struct drm_display_mode srgb_320x240_mode = { .vsync_start = 240 + 4, .vsync_end = 240 + 4 + 1, .vtotal = 262, - .vrefresh = 60, .flags = 0, }; @@ -563,7 +562,6 @@ static const struct drm_display_mode srgb_360x240_mode = { .vsync_start = 240 + 21, .vsync_end = 240 + 21 + 1, .vtotal = 262, - .vrefresh = 60, .flags = 0, }; @@ -578,7 +576,6 @@ static const struct drm_display_mode prgb_320x240_mode = { .vsync_start = 240 + 4, .vsync_end = 240 + 4 + 1, .vtotal = 262, - .vrefresh = 60, .flags = 0, }; @@ -593,7 +590,6 @@ static const struct drm_display_mode yuv_640x320_mode = { .vsync_start = 320 + 4, .vsync_end = 320 + 4 + 1, .vtotal = 320 + 4 + 1 + 18, - .vrefresh = 60, .flags = 0, }; @@ -607,7 +603,6 @@ static const struct drm_display_mode yuv_720x360_mode = { .vsync_start = 360 + 4, .vsync_end = 360 + 4 + 1, .vtotal = 360 + 4 + 1 + 18, - .vrefresh = 60, .flags = 0, }; @@ -622,7 +617,6 @@ static const struct drm_display_mode itu_r_bt_656_640_mode = { .vsync_start = 480 + 4, .vsync_end = 480 + 4 + 1, .vtotal = 500, - .vrefresh = 60, .flags = 0, }; @@ -637,7 +631,6 @@ static const struct drm_display_mode itu_r_bt_656_720_mode = { .vsync_start = 480 + 4, .vsync_end = 480 + 4 + 1, .vtotal = 500, - .vrefresh = 60, .flags = 0, }; diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c index f54077c216a3..3ed8635a6fbd 100644 --- a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c @@ -370,7 +370,6 @@ static int ili9881c_unprepare(struct drm_panel *panel) static const struct drm_display_mode bananapi_default_mode = { .clock = 62000, - .vrefresh = 60, .hdisplay = 720, .hsync_start = 720 + 10, @@ -394,7 +393,7 @@ static int ili9881c_get_modes(struct drm_panel *panel, dev_err(&ctx->dsi->dev, "failed to add mode %ux%ux@%u\n", bananapi_default_mode.hdisplay, bananapi_default_mode.vdisplay, - bananapi_default_mode.vrefresh); + drm_mode_vrefresh(&bananapi_default_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-innolux-p079zca.c b/drivers/gpu/drm/panel/panel-innolux-p079zca.c index 7419f1f0acee..fdf030f4cf92 100644 --- a/drivers/gpu/drm/panel/panel-innolux-p079zca.c +++ b/drivers/gpu/drm/panel/panel-innolux-p079zca.c @@ -223,7 +223,6 @@ static const struct drm_display_mode innolux_p079zca_mode = { .vsync_start = 1024 + 20, .vsync_end = 1024 + 20 + 4, .vtotal = 1024 + 20 + 4 + 20, - .vrefresh = 60, }; static const struct panel_desc innolux_p079zca_panel_desc = { @@ -257,7 +256,6 @@ static const struct drm_display_mode innolux_p097pfg_mode = { .vsync_start = 2048 + 100, .vsync_end = 2048 + 100 + 2, .vtotal = 2048 + 100 + 2 + 18, - .vrefresh = 60, }; /* @@ -401,7 +399,7 @@ static int innolux_panel_get_modes(struct drm_panel *panel, mode = drm_mode_duplicate(connector->dev, m); if (!mode) { DRM_DEV_ERROR(panel->dev, "failed to add mode %ux%ux@%u\n", - m->hdisplay, m->vdisplay, m->vrefresh); + m->hdisplay, m->vdisplay, drm_mode_vrefresh(m)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c index 4bfd8c877c8e..1e3fd6633981 100644 --- a/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c +++ b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c @@ -296,7 +296,6 @@ static const struct drm_display_mode default_mode = { .vsync_start = 1920 + 3, .vsync_end = 1920 + 3 + 5, .vtotal = 1920 + 3 + 5 + 6, - .vrefresh = 60, .flags = 0, }; @@ -311,7 +310,7 @@ static int jdi_panel_get_modes(struct drm_panel *panel, if (!mode) { dev_err(dev, "failed to add mode %ux%ux@%u\n", default_mode.hdisplay, default_mode.vdisplay, - default_mode.vrefresh); + drm_mode_vrefresh(&default_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c b/drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c index bac1a2a06c92..0d397af23afe 100644 --- a/drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c +++ b/drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c @@ -318,7 +318,6 @@ static const struct drm_display_mode default_mode = { .vsync_start = 2048 + 95, .vsync_end = 2048 + 95 + 2, .vtotal = 2048 + 95 + 2 + 23, - .vrefresh = 60, }; static int kingdisplay_panel_get_modes(struct drm_panel *panel, @@ -330,7 +329,7 @@ static int kingdisplay_panel_get_modes(struct drm_panel *panel, if (!mode) { DRM_DEV_ERROR(panel->dev, "failed to add mode %ux%ux@%u\n", default_mode.hdisplay, default_mode.vdisplay, - default_mode.vrefresh); + drm_mode_vrefresh(&default_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c b/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c index 113ab9c0396b..0f6a248c47a5 100644 --- a/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c +++ b/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c @@ -376,7 +376,6 @@ static const struct drm_display_mode default_mode = { .vsync_start = 1280 + 30, .vsync_end = 1280 + 30 + 4, .vtotal = 1280 + 30 + 4 + 12, - .vrefresh = 60, .clock = 69217, .width_mm = 62, .height_mm = 110, @@ -392,7 +391,7 @@ static int ltk500hd1829_get_modes(struct drm_panel *panel, if (!mode) { DRM_DEV_ERROR(ctx->dev, "failed to add mode %ux%ux@%u\n", default_mode.hdisplay, default_mode.vdisplay, - default_mode.vrefresh); + drm_mode_vrefresh(&default_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-lg-lb035q02.c b/drivers/gpu/drm/panel/panel-lg-lb035q02.c index e90efeaba4ad..14456b9cd5c0 100644 --- a/drivers/gpu/drm/panel/panel-lg-lb035q02.c +++ b/drivers/gpu/drm/panel/panel-lg-lb035q02.c @@ -134,7 +134,6 @@ static const struct drm_display_mode lb035q02_mode = { .vsync_start = 240 + 4, .vsync_end = 240 + 4 + 2, .vtotal = 240 + 4 + 2 + 18, - .vrefresh = 60, .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, .width_mm = 70, diff --git a/drivers/gpu/drm/panel/panel-lg-lg4573.c b/drivers/gpu/drm/panel/panel-lg-lg4573.c index 5907f2503755..aedc485d0727 100644 --- a/drivers/gpu/drm/panel/panel-lg-lg4573.c +++ b/drivers/gpu/drm/panel/panel-lg-lg4573.c @@ -206,7 +206,6 @@ static const struct drm_display_mode default_mode = { .vsync_start = 800 + 15, .vsync_end = 800 + 15 + 15, .vtotal = 800 + 15 + 15 + 15, - .vrefresh = 60, }; static int lg4573_get_modes(struct drm_panel *panel, @@ -218,7 +217,7 @@ static int lg4573_get_modes(struct drm_panel *panel, if (!mode) { dev_err(panel->dev, "failed to add mode %ux%ux@%u\n", default_mode.hdisplay, default_mode.vdisplay, - default_mode.vrefresh); + drm_mode_vrefresh(&default_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-nec-nl8048hl11.c b/drivers/gpu/drm/panel/panel-nec-nl8048hl11.c index c4f83f6384e1..f894971c1c7c 100644 --- a/drivers/gpu/drm/panel/panel-nec-nl8048hl11.c +++ b/drivers/gpu/drm/panel/panel-nec-nl8048hl11.c @@ -116,7 +116,6 @@ static const struct drm_display_mode nl8048_mode = { .vsync_start = 480 + 3, .vsync_end = 480 + 3 + 1, .vtotal = 480 + 3 + 1 + 4, - .vrefresh = 60, .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, .width_mm = 89, diff --git a/drivers/gpu/drm/panel/panel-novatek-nt35510.c b/drivers/gpu/drm/panel/panel-novatek-nt35510.c index 4a8fa908a2cf..e98d54df00e7 100644 --- a/drivers/gpu/drm/panel/panel-novatek-nt35510.c +++ b/drivers/gpu/drm/panel/panel-novatek-nt35510.c @@ -1028,7 +1028,6 @@ static const struct nt35510_config nt35510_hydis_hva40wv1 = { .vsync_start = 800 + 2, /* VFP = 2 */ .vsync_end = 800 + 2 + 0, /* VSync = 0 */ .vtotal = 800 + 2 + 0 + 5, /* VBP = 5 */ - .vrefresh = 60, /* Calculated */ .flags = 0, }, /* 0x09: AVDD = 5.6V */ diff --git a/drivers/gpu/drm/panel/panel-novatek-nt39016.c b/drivers/gpu/drm/panel/panel-novatek-nt39016.c index 05cae8d62d56..79be3dc4e817 100644 --- a/drivers/gpu/drm/panel/panel-novatek-nt39016.c +++ b/drivers/gpu/drm/panel/panel-novatek-nt39016.c @@ -335,7 +335,6 @@ static const struct drm_display_mode kd035g6_display_modes[] = { .vsync_start = 240 + 5, .vsync_end = 240 + 5 + 1, .vtotal = 240 + 5 + 1 + 4, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, }, { /* 50 Hz */ @@ -348,7 +347,6 @@ static const struct drm_display_mode kd035g6_display_modes[] = { .vsync_start = 240 + 5, .vsync_end = 240 + 5 + 1, .vtotal = 240 + 5 + 1 + 4, - .vrefresh = 50, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, }, }; diff --git a/drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c b/drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c index 09deb99981a4..ecd76b5391d3 100644 --- a/drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c +++ b/drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c @@ -170,7 +170,6 @@ static int lcd_olinuxino_get_modes(struct drm_panel *panel, lcd_mode->vpw; mode->vtotal = lcd_mode->vactive + lcd_mode->vfp + lcd_mode->vpw + lcd_mode->vbp; - mode->vrefresh = lcd_mode->refresh; /* Always make the first mode preferred */ if (i == 0) diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c index bb0c992171e8..895ee3d1371e 100644 --- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c +++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c @@ -81,7 +81,6 @@ static const struct drm_display_mode default_mode = { .vsync_start = 800 + 15, .vsync_end = 800 + 15 + 10, .vtotal = 800 + 15 + 10 + 14, - .vrefresh = 50, .flags = 0, .width_mm = 52, .height_mm = 86, @@ -358,7 +357,7 @@ static int otm8009a_get_modes(struct drm_panel *panel, if (!mode) { DRM_ERROR("failed to add mode %ux%ux@%u\n", default_mode.hdisplay, default_mode.vdisplay, - default_mode.vrefresh); + drm_mode_vrefresh(&default_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-osd-osd101t2587-53ts.c b/drivers/gpu/drm/panel/panel-osd-osd101t2587-53ts.c index 3a0229d60095..11b3d01aca56 100644 --- a/drivers/gpu/drm/panel/panel-osd-osd101t2587-53ts.c +++ b/drivers/gpu/drm/panel/panel-osd-osd101t2587-53ts.c @@ -102,7 +102,6 @@ static const struct drm_display_mode default_mode_osd101t2587 = { .vsync_start = 1200 + 24, .vsync_end = 1200 + 24 + 6, .vtotal = 1200 + 24 + 6 + 48, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, }; @@ -117,7 +116,7 @@ static int osd101t2587_panel_get_modes(struct drm_panel *panel, dev_err(panel->dev, "failed to add mode %ux%ux@%u\n", osd101t2587->default_mode->hdisplay, osd101t2587->default_mode->vdisplay, - osd101t2587->default_mode->vrefresh); + drm_mode_vrefresh(osd101t2587->default_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c b/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c index 69693451462e..627dfcf8adb4 100644 --- a/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c +++ b/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c @@ -149,7 +149,6 @@ static const struct drm_display_mode default_mode = { .vsync_start = 1200 + 24, .vsync_end = 1200 + 24 + 6, .vtotal = 1200 + 24 + 6 + 48, - .vrefresh = 60, }; static int wuxga_nt_panel_get_modes(struct drm_panel *panel, @@ -161,7 +160,7 @@ static int wuxga_nt_panel_get_modes(struct drm_panel *panel, if (!mode) { dev_err(panel->dev, "failed to add mode %ux%u@%u\n", default_mode.hdisplay, default_mode.vdisplay, - default_mode.vrefresh); + drm_mode_vrefresh(&default_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c index 8f078b7dd89e..e50ee26474cf 100644 --- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c +++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c @@ -209,7 +209,6 @@ static const struct drm_display_mode rpi_touchscreen_modes[] = { .vsync_start = 480 + 7, .vsync_end = 480 + 7 + 2, .vtotal = 480 + 7 + 2 + 21, - .vrefresh = 60, }, }; @@ -322,7 +321,8 @@ static int rpi_touchscreen_get_modes(struct drm_panel *panel, mode = drm_mode_duplicate(connector->dev, m); if (!mode) { dev_err(panel->dev, "failed to add mode %ux%u@%u\n", - m->hdisplay, m->vdisplay, m->vrefresh); + m->hdisplay, m->vdisplay, + drm_mode_vrefresh(m)); continue; } diff --git a/drivers/gpu/drm/panel/panel-raydium-rm67191.c b/drivers/gpu/drm/panel/panel-raydium-rm67191.c index 313637d53d28..d001c52e0ca9 100644 --- a/drivers/gpu/drm/panel/panel-raydium-rm67191.c +++ b/drivers/gpu/drm/panel/panel-raydium-rm67191.c @@ -218,7 +218,6 @@ static const struct drm_display_mode default_mode = { .vsync_start = 1920 + 10, .vsync_end = 1920 + 10 + 2, .vtotal = 1920 + 10 + 2 + 4, - .vrefresh = 60, .width_mm = 68, .height_mm = 121, .flags = DRM_MODE_FLAG_NHSYNC | @@ -445,7 +444,7 @@ static int rad_panel_get_modes(struct drm_panel *panel, if (!mode) { DRM_DEV_ERROR(panel->dev, "failed to add mode %ux%ux@%u\n", default_mode.hdisplay, default_mode.vdisplay, - default_mode.vrefresh); + drm_mode_vrefresh(&default_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-raydium-rm68200.c b/drivers/gpu/drm/panel/panel-raydium-rm68200.c index e8982948e0ea..81ae8be62d15 100644 --- a/drivers/gpu/drm/panel/panel-raydium-rm68200.c +++ b/drivers/gpu/drm/panel/panel-raydium-rm68200.c @@ -92,7 +92,6 @@ static const struct drm_display_mode default_mode = { .vsync_start = 1280 + 12, .vsync_end = 1280 + 12 + 4, .vtotal = 1280 + 12 + 4 + 12, - .vrefresh = 50, .flags = 0, .width_mm = 68, .height_mm = 122, @@ -339,7 +338,7 @@ static int rm68200_get_modes(struct drm_panel *panel, if (!mode) { DRM_ERROR("failed to add mode %ux%ux@%u\n", default_mode.hdisplay, default_mode.vdisplay, - default_mode.vrefresh); + drm_mode_vrefresh(&default_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c index 38ff742bc120..da4e373291f9 100644 --- a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c +++ b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c @@ -223,7 +223,6 @@ static const struct drm_display_mode default_mode = { .vsync_start = 1440 + 20, .vsync_end = 1440 + 20 + 4, .vtotal = 1440 + 20 + 4 + 12, - .vrefresh = 60, .clock = 75276, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, .width_mm = 65, @@ -240,7 +239,7 @@ static int jh057n_get_modes(struct drm_panel *panel, if (!mode) { DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n", default_mode.hdisplay, default_mode.vdisplay, - default_mode.vrefresh); + drm_mode_vrefresh(&default_mode)); return -ENOMEM; } @@ -360,7 +359,7 @@ static int jh057n_probe(struct mipi_dsi_device *dsi) DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready\n", default_mode.hdisplay, default_mode.vdisplay, - default_mode.vrefresh, + drm_mode_vrefresh(&default_mode), mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes); jh057n_debugfs_init(ctx); diff --git a/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c b/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c index ef18559e237e..a7b0b3e39e1a 100644 --- a/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c +++ b/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c @@ -103,7 +103,6 @@ static const struct drm_display_mode default_mode = { .vsync_start = 600 + 12, .vsync_end = 600 + 12 + 10, .vtotal = 600 + 12 + 10 + 13, - .vrefresh = 60, .width_mm = 154, .height_mm = 85, diff --git a/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c b/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c index 2150043dcf6b..f02645d396ac 100644 --- a/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c +++ b/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c @@ -37,12 +37,6 @@ static const struct drm_display_mode samsung_s6d16d0_mode = { .vsync_start = 480 + 1, .vsync_end = 480 + 1 + 1, .vtotal = 480 + 1 + 1 + 1, - /* - * This depends on the clocking HS vs LP rate, this value - * is calculated as: - * vrefresh = (clock * 1000) / (htotal*vtotal) - */ - .vrefresh = 816, .width_mm = 84, .height_mm = 48, }; diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c index 36ebd5a4ac7b..80ef122e7466 100644 --- a/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c +++ b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c @@ -617,7 +617,6 @@ static const struct drm_display_mode s6e3ha2_mode = { .vsync_start = 2560 + 1, .vsync_end = 2560 + 1 + 1, .vtotal = 2560 + 1 + 1 + 15, - .vrefresh = 60, .flags = 0, }; @@ -636,7 +635,6 @@ static const struct drm_display_mode s6e3hf2_mode = { .vsync_start = 2560 + 1, .vsync_end = 2560 + 1 + 1, .vtotal = 2560 + 1 + 1 + 15, - .vrefresh = 60, .flags = 0, }; @@ -655,7 +653,7 @@ static int s6e3ha2_get_modes(struct drm_panel *panel, if (!mode) { DRM_ERROR("failed to add mode %ux%ux@%u\n", ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay, - ctx->desc->mode->vrefresh); + drm_mode_vrefresh(ctx->desc->mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c b/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c index a3570e0a90a8..1247656d73bf 100644 --- a/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c +++ b/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c @@ -52,7 +52,6 @@ static const struct drm_display_mode default_mode = { .vsync_start = 320 + 150, .vsync_end = 320 + 150 + 1, .vtotal = 320 + 150 + 1 + 2, - .vrefresh = 30, .flags = 0, }; @@ -409,7 +408,7 @@ static int s6e63j0x03_get_modes(struct drm_panel *panel, if (!mode) { DRM_ERROR("failed to add mode %ux%ux@%u\n", default_mode.hdisplay, default_mode.vdisplay, - default_mode.vrefresh); + drm_mode_vrefresh(&default_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c b/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c index a5f76eb4fa25..64421347bfd4 100644 --- a/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c +++ b/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c @@ -117,7 +117,6 @@ static const struct drm_display_mode default_mode = { .vsync_start = 800 + 28, .vsync_end = 800 + 28 + 2, .vtotal = 800 + 28 + 2 + 1, - .vrefresh = 60, .width_mm = 53, .height_mm = 89, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, @@ -371,7 +370,7 @@ static int s6e63m0_get_modes(struct drm_panel *panel, if (!mode) { DRM_ERROR("failed to add mode %ux%ux@%u\n", default_mode.hdisplay, default_mode.vdisplay, - default_mode.vrefresh); + drm_mode_vrefresh(&default_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams452ef01.c b/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams452ef01.c index 9d843fcc3a22..485eabecfcc9 100644 --- a/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams452ef01.c +++ b/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams452ef01.c @@ -177,7 +177,6 @@ static const struct drm_display_mode s6e88a0_ams452ef01_mode = { .vsync_start = 960 + 14, .vsync_end = 960 + 14 + 2, .vtotal = 960 + 14 + 2 + 8, - .vrefresh = 60, .width_mm = 56, .height_mm = 100, }; diff --git a/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c b/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c index 40fcbbbacb2c..e417dc4921c2 100644 --- a/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c +++ b/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c @@ -92,7 +92,8 @@ static int seiko_panel_get_fixed_modes(struct seiko_panel *panel, mode = drm_mode_duplicate(connector->dev, m); if (!mode) { dev_err(panel->base.dev, "failed to add mode %ux%u@%u\n", - m->hdisplay, m->vdisplay, m->vrefresh); + m->hdisplay, m->vdisplay, + drm_mode_vrefresh(m)); continue; } diff --git a/drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c b/drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c index b5d1977221a7..f07324b705b3 100644 --- a/drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c +++ b/drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c @@ -269,7 +269,6 @@ static const struct drm_display_mode default_mode = { .vsync_start = 1600 + 4, .vsync_end = 1600 + 4 + 8, .vtotal = 1600 + 4 + 8 + 32, - .vrefresh = 60, }; static int sharp_panel_get_modes(struct drm_panel *panel, @@ -281,7 +280,7 @@ static int sharp_panel_get_modes(struct drm_panel *panel, if (!mode) { dev_err(panel->dev, "failed to add mode %ux%ux@%u\n", default_mode.hdisplay, default_mode.vdisplay, - default_mode.vrefresh); + drm_mode_vrefresh(&default_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-sharp-ls037v7dw01.c b/drivers/gpu/drm/panel/panel-sharp-ls037v7dw01.c index 1cf3f02435c1..d7bf13b9e1d6 100644 --- a/drivers/gpu/drm/panel/panel-sharp-ls037v7dw01.c +++ b/drivers/gpu/drm/panel/panel-sharp-ls037v7dw01.c @@ -93,7 +93,6 @@ static const struct drm_display_mode ls037v7dw01_mode = { .vsync_start = 640 + 1, .vsync_end = 640 + 1 + 1, .vtotal = 640 + 1 + 1 + 1, - .vrefresh = 58, .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, .width_mm = 56, diff --git a/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c b/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c index ce586c6d70c7..b2e58935529c 100644 --- a/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c +++ b/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c @@ -201,7 +201,6 @@ static const struct drm_display_mode default_mode = { .vsync_start = 960 + 3, .vsync_end = 960 + 3 + 15, .vtotal = 960 + 3 + 15 + 1, - .vrefresh = 60, }; static int sharp_nt_panel_get_modes(struct drm_panel *panel, @@ -213,7 +212,7 @@ static int sharp_nt_panel_get_modes(struct drm_panel *panel, if (!mode) { dev_err(panel->dev, "failed to add mode %ux%u@%u\n", default_mode.hdisplay, default_mode.vdisplay, - default_mode.vrefresh); + drm_mode_vrefresh(&default_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index b6ecd1552132..b067f66cea0e 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -163,7 +163,8 @@ static unsigned int panel_simple_get_display_modes(struct panel_simple *panel, mode = drm_mode_duplicate(connector->dev, m); if (!mode) { dev_err(panel->base.dev, "failed to add mode %ux%u@%u\n", - m->hdisplay, m->vdisplay, m->vrefresh); + m->hdisplay, m->vdisplay, + drm_mode_vrefresh(m)); continue; } @@ -602,7 +603,6 @@ static const struct drm_display_mode ampire_am_480272h3tmqw_t01h_mode = { .vsync_start = 272 + 2, .vsync_end = 272 + 2 + 10, .vtotal = 272 + 2 + 10 + 2, - .vrefresh = 60, .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, }; @@ -627,7 +627,6 @@ static const struct drm_display_mode ampire_am800480r3tmqwa1h_mode = { .vsync_start = 480 + 2, .vsync_end = 480 + 2 + 45, .vtotal = 480 + 2 + 45 + 0, - .vrefresh = 60, .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, }; @@ -678,7 +677,6 @@ static const struct drm_display_mode auo_b101aw03_mode = { .vsync_start = 600 + 16, .vsync_end = 600 + 16 + 6, .vtotal = 600 + 16 + 6 + 16, - .vrefresh = 60, }; static const struct panel_desc auo_b101aw03 = { @@ -723,7 +721,6 @@ static const struct drm_display_mode auo_b101xtn01_mode = { .vsync_start = 768 + 14, .vsync_end = 768 + 14 + 42, .vtotal = 768 + 14 + 42, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, }; @@ -747,7 +744,6 @@ static const struct drm_display_mode auo_b116xak01_mode = { .vsync_start = 768 + 4, .vsync_end = 768 + 4 + 6, .vtotal = 768 + 4 + 6 + 15, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, }; @@ -776,7 +772,6 @@ static const struct drm_display_mode auo_b116xw03_mode = { .vsync_start = 768 + 10, .vsync_end = 768 + 10 + 12, .vtotal = 768 + 10 + 12 + 6, - .vrefresh = 60, }; static const struct panel_desc auo_b116xw03 = { @@ -799,7 +794,6 @@ static const struct drm_display_mode auo_b133xtn01_mode = { .vsync_start = 768 + 3, .vsync_end = 768 + 3 + 6, .vtotal = 768 + 3 + 6 + 13, - .vrefresh = 60, }; static const struct panel_desc auo_b133xtn01 = { @@ -822,7 +816,6 @@ static const struct drm_display_mode auo_b133htn01_mode = { .vsync_start = 1080 + 25, .vsync_end = 1080 + 25 + 10, .vtotal = 1080 + 25 + 10 + 10, - .vrefresh = 60, }; static const struct panel_desc auo_b133htn01 = { @@ -878,7 +871,6 @@ static const struct drm_display_mode auo_g101evn010_mode = { .vsync_start = 800 + 8, .vsync_end = 800 + 8 + 2, .vtotal = 800 + 8 + 2 + 6, - .vrefresh = 60, }; static const struct panel_desc auo_g101evn010 = { @@ -903,7 +895,6 @@ static const struct drm_display_mode auo_g104sn02_mode = { .vsync_start = 600 + 10, .vsync_end = 600 + 10 + 35, .vtotal = 600 + 10 + 35 + 2, - .vrefresh = 60, }; static const struct panel_desc auo_g104sn02 = { @@ -926,7 +917,6 @@ static const struct drm_display_mode auo_g121ean01_mode = { .vsync_start = 800 + 6, .vsync_end = 800 + 6 + 4, .vtotal = 800 + 6 + 4 + 10, - .vrefresh = 60, }; static const struct panel_desc auo_g121ean01 = { @@ -981,7 +971,6 @@ static const struct drm_display_mode auo_g156xtn01_mode = { .vsync_start = 768 + 4, .vsync_end = 768 + 4 + 4, .vtotal = 806, - .vrefresh = 60, }; static const struct panel_desc auo_g156xtn01 = { @@ -1095,7 +1084,6 @@ static const struct drm_display_mode auo_t215hvn01_mode = { .vsync_start = 1080 + 4, .vsync_end = 1080 + 4 + 5, .vtotal = 1080 + 4 + 5 + 36, - .vrefresh = 60, }; static const struct panel_desc auo_t215hvn01 = { @@ -1122,7 +1110,6 @@ static const struct drm_display_mode avic_tm070ddh03_mode = { .vsync_start = 600 + 17, .vsync_end = 600 + 17 + 1, .vtotal = 600 + 17 + 1 + 17, - .vrefresh = 60, }; static const struct panel_desc avic_tm070ddh03 = { @@ -1172,7 +1159,6 @@ static const struct drm_display_mode boe_hv070wsa_mode = { .vsync_start = 600 + 10, .vsync_end = 600 + 10 + 10, .vtotal = 600 + 10 + 10 + 10, - .vrefresh = 60, }; static const struct panel_desc boe_hv070wsa = { @@ -1195,7 +1181,6 @@ static const struct drm_display_mode boe_nv101wxmn51_modes[] = { .vsync_start = 800 + 3, .vsync_end = 800 + 3 + 5, .vtotal = 800 + 3 + 5 + 24, - .vrefresh = 60, }, { .clock = 57500, @@ -1207,7 +1192,6 @@ static const struct drm_display_mode boe_nv101wxmn51_modes[] = { .vsync_start = 800 + 3, .vsync_end = 800 + 3 + 5, .vtotal = 800 + 3 + 5 + 24, - .vrefresh = 48, }, }; @@ -1237,7 +1221,6 @@ static const struct drm_display_mode boe_nv133fhm_n61_modes = { .vsync_start = 1080 + 3, .vsync_end = 1080 + 3 + 6, .vtotal = 1080 + 3 + 6 + 31, - .vrefresh = 60, }; /* Also used for boe_nv133fhm_n62 */ @@ -1269,7 +1252,6 @@ static const struct drm_display_mode boe_nv140fhmn49_modes[] = { .vsync_start = 1080 + 3, .vsync_end = 1080 + 3 + 5, .vtotal = 1125, - .vrefresh = 60, }, }; @@ -1300,7 +1282,6 @@ static const struct drm_display_mode cdtech_s043wq26h_ct7_mode = { .vsync_start = 272 + 8, .vsync_end = 272 + 8 + 8, .vtotal = 272 + 8 + 8 + 8, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, }; @@ -1325,7 +1306,6 @@ static const struct drm_display_mode cdtech_s070wv95_ct16_mode = { .vsync_start = 480 + 29, .vsync_end = 480 + 29 + 13, .vtotal = 480 + 29 + 13 + 3, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, }; @@ -1349,7 +1329,6 @@ static const struct drm_display_mode chunghwa_claa070wp03xg_mode = { .vsync_start = 1280 + 1, .vsync_end = 1280 + 1 + 7, .vtotal = 1280 + 1 + 7 + 15, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, }; @@ -1373,7 +1352,6 @@ static const struct drm_display_mode chunghwa_claa101wa01a_mode = { .vsync_start = 768 + 4, .vsync_end = 768 + 4 + 4, .vtotal = 768 + 4 + 4 + 4, - .vrefresh = 60, }; static const struct panel_desc chunghwa_claa101wa01a = { @@ -1396,7 +1374,6 @@ static const struct drm_display_mode chunghwa_claa101wb01_mode = { .vsync_start = 768 + 16, .vsync_end = 768 + 16 + 8, .vtotal = 768 + 16 + 8 + 16, - .vrefresh = 60, }; static const struct panel_desc chunghwa_claa101wb01 = { @@ -1419,7 +1396,6 @@ static const struct drm_display_mode dataimage_scf0700c48ggu18_mode = { .vsync_start = 480 + 10, .vsync_end = 480 + 10 + 2, .vtotal = 480 + 10 + 2 + 33, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, }; @@ -1506,7 +1482,6 @@ static const struct drm_display_mode edt_et035012dm6_mode = { .vsync_start = 240 + 4, .vsync_end = 240 + 4 + 4, .vtotal = 240 + 4 + 4 + 14, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, }; @@ -1538,7 +1513,6 @@ static const struct drm_display_mode edt_etm043080dh6gp_mode = { .vsync_start = 288 + 2, .vsync_end = 288 + 2 + 4, .vtotal = 288 + 2 + 4 + 10, - .vrefresh = 60, }; static const struct panel_desc edt_etm043080dh6gp = { @@ -1563,7 +1537,6 @@ static const struct drm_display_mode edt_etm0430g0dh6_mode = { .vsync_start = 272 + 2, .vsync_end = 272 + 2 + 10, .vtotal = 272 + 2 + 10 + 2, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, }; @@ -1587,7 +1560,6 @@ static const struct drm_display_mode edt_et057090dhu_mode = { .vsync_start = 480 + 10, .vsync_end = 480 + 10 + 3, .vtotal = 480 + 10 + 3 + 32, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, }; @@ -1613,7 +1585,6 @@ static const struct drm_display_mode edt_etm0700g0dh6_mode = { .vsync_start = 480 + 10, .vsync_end = 480 + 10 + 2, .vtotal = 480 + 10 + 2 + 33, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, }; @@ -1678,7 +1649,6 @@ static const struct drm_display_mode foxlink_fl500wvr00_a0t_mode = { .vsync_start = 480 + 37, .vsync_end = 480 + 37 + 2, .vtotal = 480 + 37 + 2 + 8, - .vrefresh = 60, }; static const struct panel_desc foxlink_fl500wvr00_a0t = { @@ -1702,7 +1672,6 @@ static const struct drm_display_mode frida_frd350h54004_mode = { .vsync_start = 240 + 2, .vsync_end = 240 + 2 + 6, .vtotal = 240 + 2 + 6 + 2, - .vrefresh = 60, .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, }; @@ -1729,7 +1698,6 @@ static const struct drm_display_mode friendlyarm_hd702e_mode = { .vsync_start = 1280 + 4, .vsync_end = 1280 + 4 + 8, .vtotal = 1280 + 4 + 8 + 4, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, }; @@ -1752,7 +1720,6 @@ static const struct drm_display_mode giantplus_gpg482739qs5_mode = { .vsync_start = 272 + 8, .vsync_end = 272 + 8 + 1, .vtotal = 272 + 8 + 1 + 8, - .vrefresh = 60, }; static const struct panel_desc giantplus_gpg482739qs5 = { @@ -1856,7 +1823,6 @@ static const struct drm_display_mode hitachi_tx23d38vm0caa_mode = { .vsync_start = 480 + 16, .vsync_end = 480 + 16 + 13, .vtotal = 480 + 16 + 13 + 16, - .vrefresh = 60, }; static const struct panel_desc hitachi_tx23d38vm0caa = { @@ -1883,7 +1849,6 @@ static const struct drm_display_mode innolux_at043tn24_mode = { .vsync_start = 272 + 2, .vsync_end = 272 + 2 + 10, .vtotal = 272 + 2 + 10 + 2, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, }; @@ -1909,7 +1874,6 @@ static const struct drm_display_mode innolux_at070tn92_mode = { .vsync_start = 480 + 22, .vsync_end = 480 + 22 + 10, .vtotal = 480 + 22 + 23 + 10, - .vrefresh = 60, }; static const struct panel_desc innolux_at070tn92 = { @@ -2020,7 +1984,6 @@ static const struct drm_display_mode innolux_g121x1_l03_mode = { .vsync_start = 768 + 38, .vsync_end = 768 + 38 + 1, .vtotal = 768 + 38 + 1 + 0, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, }; @@ -2082,7 +2045,6 @@ static const struct drm_display_mode innolux_n156bge_l21_mode = { .vsync_start = 768 + 2, .vsync_end = 768 + 2 + 6, .vtotal = 768 + 2 + 6 + 12, - .vrefresh = 60, }; static const struct panel_desc innolux_n156bge_l21 = { @@ -2105,7 +2067,6 @@ static const struct drm_display_mode innolux_p120zdg_bf1_mode = { .vsync_start = 1440 + 3, .vsync_end = 1440 + 3 + 10, .vtotal = 1440 + 3 + 10 + 27, - .vrefresh = 60, .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, }; @@ -2133,7 +2094,6 @@ static const struct drm_display_mode innolux_zj070na_01p_mode = { .vsync_start = 600 + 16, .vsync_end = 600 + 16 + 4, .vtotal = 600 + 16 + 4 + 16, - .vrefresh = 60, }; static const struct panel_desc innolux_zj070na_01p = { @@ -2156,7 +2116,6 @@ static const struct drm_display_mode ivo_m133nwf4_r0_mode = { .vsync_start = 1080 + 3, .vsync_end = 1080 + 3 + 12, .vtotal = 1080 + 3 + 12 + 17, - .vrefresh = 60, .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, }; @@ -2260,7 +2219,6 @@ static const struct drm_display_mode lemaker_bl035_rgb_002_mode = { .vsync_start = 240 + 4, .vsync_end = 240 + 4 + 3, .vtotal = 240 + 4 + 3 + 15, - .vrefresh = 60, }; static const struct panel_desc lemaker_bl035_rgb_002 = { @@ -2284,7 +2242,6 @@ static const struct drm_display_mode lg_lb070wv8_mode = { .vsync_start = 480 + 10, .vsync_end = 480 + 10 + 25, .vtotal = 480 + 10 + 25 + 10, - .vrefresh = 60, }; static const struct panel_desc lg_lb070wv8 = { @@ -2309,7 +2266,6 @@ static const struct drm_display_mode lg_lp079qx1_sp0v_mode = { .vsync_start = 2048 + 8, .vsync_end = 2048 + 8 + 4, .vtotal = 2048 + 8 + 4 + 8, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, }; @@ -2332,7 +2288,6 @@ static const struct drm_display_mode lg_lp097qx1_spa1_mode = { .vsync_start = 1536 + 3, .vsync_end = 1536 + 3 + 1, .vtotal = 1536 + 3 + 1 + 9, - .vrefresh = 60, }; static const struct panel_desc lg_lp097qx1_spa1 = { @@ -2354,7 +2309,6 @@ static const struct drm_display_mode lg_lp120up1_mode = { .vsync_start = 1280 + 4, .vsync_end = 1280 + 4 + 4, .vtotal = 1280 + 4 + 4 + 12, - .vrefresh = 60, }; static const struct panel_desc lg_lp120up1 = { @@ -2378,7 +2332,6 @@ static const struct drm_display_mode lg_lp129qe_mode = { .vsync_start = 1700 + 3, .vsync_end = 1700 + 3 + 10, .vtotal = 1700 + 3 + 10 + 36, - .vrefresh = 60, }; static const struct panel_desc lg_lp129qe = { @@ -2459,7 +2412,6 @@ static const struct drm_display_mode mitsubishi_aa070mc01_mode = { .vsync_start = 480 + 0, .vsync_end = 480 + 48 + 1, .vtotal = 480 + 48 + 1 + 0, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, }; @@ -2474,7 +2426,6 @@ static const struct drm_display_mode logicpd_type_28_mode = { .vsync_start = 272 + 2, .vsync_end = 272 + 2 + 11, .vtotal = 272 + 2 + 11 + 3, - .vrefresh = 60, .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, }; @@ -2554,7 +2505,6 @@ static const struct drm_display_mode nec_nl4827hc19_05b_mode = { .vsync_start = 272 + 2, .vsync_end = 272 + 2 + 4, .vtotal = 272 + 2 + 4 + 2, - .vrefresh = 74, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, }; @@ -2580,7 +2530,6 @@ static const struct drm_display_mode netron_dy_e231732_mode = { .vsync_start = 600 + 127, .vsync_end = 600 + 127 + 20, .vtotal = 600 + 127 + 20 + 3, - .vrefresh = 60, }; static const struct panel_desc netron_dy_e231732 = { @@ -2604,7 +2553,6 @@ static const struct drm_display_mode neweast_wjfh116008a_modes[] = { .vsync_start = 1080 + 3, .vsync_end = 1080 + 3 + 5, .vtotal = 1080 + 3 + 5 + 23, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, }, { .clock = 110920, @@ -2616,7 +2564,6 @@ static const struct drm_display_mode neweast_wjfh116008a_modes[] = { .vsync_start = 1080 + 3, .vsync_end = 1080 + 3 + 5, .vtotal = 1080 + 3 + 5 + 23, - .vrefresh = 48, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, } }; @@ -2648,7 +2595,6 @@ static const struct drm_display_mode newhaven_nhd_43_480272ef_atxl_mode = { .vsync_start = 272 + 2, .vsync_end = 272 + 2 + 10, .vtotal = 272 + 2 + 10 + 2, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, }; @@ -2756,7 +2702,6 @@ static const struct drm_display_mode olimex_lcd_olinuxino_43ts_mode = { .vsync_start = 272 + 8, .vsync_end = 272 + 8 + 5, .vtotal = 272 + 8 + 5 + 3, - .vrefresh = 60, }; static const struct panel_desc olimex_lcd_olinuxino_43ts = { @@ -2784,7 +2729,6 @@ static const struct drm_display_mode ontat_yx700wv03_mode = { .vsync_start = 483, .vsync_end = 493, .vtotal = 500, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, }; @@ -2813,7 +2757,6 @@ static const struct drm_display_mode ortustech_com37h3m_mode = { .vsync_start = 640 + 4, .vsync_end = 640 + 4 + 2, .vtotal = 640 + 4 + 2 + 4, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, }; @@ -2840,7 +2783,6 @@ static const struct drm_display_mode ortustech_com43h4m85ulc_mode = { .vsync_start = 800 + 3, .vsync_end = 800 + 3 + 3, .vtotal = 800 + 3 + 3 + 3, - .vrefresh = 60, }; static const struct panel_desc ortustech_com43h4m85ulc = { @@ -2866,7 +2808,6 @@ static const struct drm_display_mode osddisplays_osd070t1718_19ts_mode = { .vsync_start = 480 + 22, .vsync_end = 480 + 22 + 13, .vtotal = 480 + 22 + 13 + 10, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, }; @@ -2894,7 +2835,6 @@ static const struct drm_display_mode pda_91_00156_a0_mode = { .vsync_start = 480 + 1, .vsync_end = 480 + 1 + 23, .vtotal = 480 + 1 + 23 + 22, - .vrefresh = 60, }; static const struct panel_desc pda_91_00156_a0 = { @@ -2918,7 +2858,6 @@ static const struct drm_display_mode qd43003c0_40_mode = { .vsync_start = 272 + 4, .vsync_end = 272 + 4 + 10, .vtotal = 272 + 4 + 10 + 2, - .vrefresh = 60, }; static const struct panel_desc qd43003c0_40 = { @@ -2972,7 +2911,6 @@ static const struct drm_display_mode rocktech_rk101ii01d_ct_mode = { .vsync_start = 800 + 2, .vsync_end = 800 + 2 + 5, .vtotal = 800 + 2 + 5 + 16, - .vrefresh = 60, }; static const struct panel_desc rocktech_rk101ii01d_ct = { @@ -3001,7 +2939,6 @@ static const struct drm_display_mode samsung_lsn122dl01_c01_mode = { .vsync_start = 1600 + 2, .vsync_end = 1600 + 2 + 5, .vtotal = 1600 + 2 + 5 + 57, - .vrefresh = 60, }; static const struct panel_desc samsung_lsn122dl01_c01 = { @@ -3023,7 +2960,6 @@ static const struct drm_display_mode samsung_ltn101nt05_mode = { .vsync_start = 600 + 3, .vsync_end = 600 + 3 + 6, .vtotal = 600 + 3 + 6 + 61, - .vrefresh = 60, }; static const struct panel_desc samsung_ltn101nt05 = { @@ -3046,7 +2982,6 @@ static const struct drm_display_mode samsung_ltn140at29_301_mode = { .vsync_start = 768 + 2, .vsync_end = 768 + 2 + 5, .vtotal = 768 + 2 + 5 + 17, - .vrefresh = 60, }; static const struct panel_desc samsung_ltn140at29_301 = { @@ -3093,7 +3028,6 @@ static const struct drm_display_mode sharp_ld_d5116z01b_mode = { .vsync_start = 1280 + 3, .vsync_end = 1280 + 3 + 10, .vtotal = 1280 + 3 + 10 + 57, - .vrefresh = 60, .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, }; @@ -3119,7 +3053,6 @@ static const struct drm_display_mode sharp_lq070y3dg3b_mode = { .vsync_start = 480 + 8, .vsync_end = 480 + 8 + 2, .vtotal = 480 + 8 + 2 + 35, - .vrefresh = 60, .flags = DISPLAY_FLAGS_PIXDATA_POSEDGE, }; @@ -3146,7 +3079,6 @@ static const struct drm_display_mode sharp_lq035q7db03_mode = { .vsync_start = 320 + 9, .vsync_end = 320 + 9 + 1, .vtotal = 320 + 9 + 1 + 7, - .vrefresh = 60, }; static const struct panel_desc sharp_lq035q7db03 = { @@ -3250,7 +3182,6 @@ static const struct drm_display_mode shelly_sca07010_bfn_lnn_mode = { .vsync_start = 480 + 1, .vsync_end = 480 + 1 + 23, .vtotal = 480 + 1 + 23 + 22, - .vrefresh = 60, }; static const struct panel_desc shelly_sca07010_bfn_lnn = { @@ -3273,7 +3204,6 @@ static const struct drm_display_mode starry_kr070pe2t_mode = { .vsync_start = 480 + 22, .vsync_end = 480 + 22 + 1, .vtotal = 480 + 22 + 1 + 22, - .vrefresh = 60, }; static const struct panel_desc starry_kr070pe2t = { @@ -3299,7 +3229,6 @@ static const struct drm_display_mode starry_kr122ea0sra_mode = { .vsync_start = 1200 + 15, .vsync_end = 1200 + 15 + 2, .vtotal = 1200 + 15 + 2 + 18, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, }; @@ -3327,7 +3256,6 @@ static const struct drm_display_mode tfc_s9700rtwv43tr_01b_mode = { .vsync_start = 480 + 13, .vsync_end = 480 + 13 + 2, .vtotal = 480 + 13 + 2 + 29, - .vrefresh = 62, }; static const struct panel_desc tfc_s9700rtwv43tr_01b = { @@ -3403,7 +3331,6 @@ static const struct drm_display_mode ti_nspire_cx_lcd_mode[] = { .vsync_start = 240 + 3, .vsync_end = 240 + 3 + 1, .vtotal = 240 + 3 + 1 + 17, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, }, }; @@ -3431,7 +3358,6 @@ static const struct drm_display_mode ti_nspire_classic_lcd_mode[] = { .vsync_start = 240 + 0, .vsync_end = 240 + 0 + 1, .vtotal = 240 + 0 + 1 + 0, - .vrefresh = 60, .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, }, }; @@ -3460,7 +3386,6 @@ static const struct drm_display_mode toshiba_lt089ac29000_mode = { .vsync_start = 768 + 20, .vsync_end = 768 + 20 + 7, .vtotal = 768 + 20 + 7 + 3, - .vrefresh = 60, }; static const struct panel_desc toshiba_lt089ac29000 = { @@ -3485,7 +3410,6 @@ static const struct drm_display_mode tpk_f07a_0102_mode = { .vsync_start = 480 + 10, .vsync_end = 480 + 10 + 2, .vtotal = 480 + 10 + 2 + 33, - .vrefresh = 60, }; static const struct panel_desc tpk_f07a_0102 = { @@ -3508,7 +3432,6 @@ static const struct drm_display_mode tpk_f10a_0102_mode = { .vsync_start = 600 + 20, .vsync_end = 600 + 20 + 5, .vtotal = 600 + 20 + 5 + 25, - .vrefresh = 60, }; static const struct panel_desc tpk_f10a_0102 = { @@ -3567,7 +3490,6 @@ static const struct drm_display_mode vl050_8048nt_c01_mode = { .vsync_start = 480 + 22, .vsync_end = 480 + 22 + 10, .vtotal = 480 + 22 + 10 + 23, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, }; @@ -3593,7 +3515,6 @@ static const struct drm_display_mode winstar_wf35ltiacd_mode = { .vsync_start = 240 + 4, .vsync_end = 240 + 4 + 3, .vtotal = 240 + 4 + 3 + 15, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, }; @@ -3619,7 +3540,6 @@ static const struct drm_display_mode arm_rtsm_mode[] = { .vsync_start = 768 + 3, .vsync_end = 768 + 3 + 6, .vtotal = 768 + 3 + 6 + 29, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, }, }; @@ -4070,7 +3990,6 @@ static const struct drm_display_mode auo_b080uan01_mode = { .vsync_start = 1920 + 9, .vsync_end = 1920 + 9 + 2, .vtotal = 1920 + 9 + 2 + 8, - .vrefresh = 60, }; static const struct panel_desc_dsi auo_b080uan01 = { @@ -4098,7 +4017,6 @@ static const struct drm_display_mode boe_tv080wum_nl0_mode = { .vsync_start = 1920 + 21, .vsync_end = 1920 + 21 + 3, .vtotal = 1920 + 21 + 3 + 18, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, }; @@ -4128,7 +4046,6 @@ static const struct drm_display_mode lg_ld070wx3_sl01_mode = { .vsync_start = 1280 + 28, .vsync_end = 1280 + 28 + 1, .vtotal = 1280 + 28 + 1 + 14, - .vrefresh = 60, }; static const struct panel_desc_dsi lg_ld070wx3_sl01 = { @@ -4156,7 +4073,6 @@ static const struct drm_display_mode lg_lh500wx1_sd03_mode = { .vsync_start = 1280 + 8, .vsync_end = 1280 + 8 + 4, .vtotal = 1280 + 8 + 4 + 12, - .vrefresh = 60, }; static const struct panel_desc_dsi lg_lh500wx1_sd03 = { @@ -4184,7 +4100,6 @@ static const struct drm_display_mode panasonic_vvx10f004b00_mode = { .vsync_start = 1200 + 17, .vsync_end = 1200 + 17 + 2, .vtotal = 1200 + 17 + 2 + 16, - .vrefresh = 60, }; static const struct panel_desc_dsi panasonic_vvx10f004b00 = { @@ -4213,7 +4128,6 @@ static const struct drm_display_mode lg_acx467akm_7_mode = { .vsync_start = 1920 + 2, .vsync_end = 1920 + 2 + 2, .vtotal = 1920 + 2 + 2 + 2, - .vrefresh = 60, }; static const struct panel_desc_dsi lg_acx467akm_7 = { @@ -4241,7 +4155,6 @@ static const struct drm_display_mode osd101t2045_53ts_mode = { .vsync_start = 1200 + 16, .vsync_end = 1200 + 16 + 2, .vtotal = 1200 + 16 + 2 + 16, - .vrefresh = 60, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, }; diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7701.c b/drivers/gpu/drm/panel/panel-sitronix-st7701.c index 4b4f2558e3b4..692041ae4eb6 100644 --- a/drivers/gpu/drm/panel/panel-sitronix-st7701.c +++ b/drivers/gpu/drm/panel/panel-sitronix-st7701.c @@ -272,7 +272,7 @@ static int st7701_get_modes(struct drm_panel *panel, DRM_DEV_ERROR(&st7701->dsi->dev, "failed to add mode %ux%ux@%u\n", desc_mode->hdisplay, desc_mode->vdisplay, - desc_mode->vrefresh); + drm_mode_vrefresh(desc_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c index cc02c54c1b2e..3513ae40efa8 100644 --- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c +++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c @@ -165,7 +165,6 @@ static const struct drm_display_mode default_mode = { .vsync_start = 320 + 8, .vsync_end = 320 + 8 + 4, .vtotal = 320 + 8 + 4 + 4, - .vrefresh = 60, }; static int st7789v_get_modes(struct drm_panel *panel, @@ -177,7 +176,7 @@ static int st7789v_get_modes(struct drm_panel *panel, if (!mode) { dev_err(panel->dev, "failed to add mode %ux%ux@%u\n", default_mode.hdisplay, default_mode.vdisplay, - default_mode.vrefresh); + drm_mode_vrefresh(&default_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/panel/panel-sony-acx424akp.c b/drivers/gpu/drm/panel/panel-sony-acx424akp.c index c91e55b2d7a3..97a1b4790d3c 100644 --- a/drivers/gpu/drm/panel/panel-sony-acx424akp.c +++ b/drivers/gpu/drm/panel/panel-sony-acx424akp.c @@ -57,7 +57,6 @@ static const struct drm_display_mode sony_acx424akp_vid_mode = { .vsync_start = 864 + 14, .vsync_end = 864 + 14 + 1, .vtotal = 864 + 14 + 1 + 11, - .vrefresh = 60, .width_mm = 48, .height_mm = 84, .flags = DRM_MODE_FLAG_PVSYNC, @@ -81,7 +80,6 @@ static const struct drm_display_mode sony_acx424akp_cmd_mode = { * Some desired refresh rate, experiments at the maximum "pixel" * clock speed (HS clock 420 MHz) yields around 117Hz. */ - .vrefresh = 60, .width_mm = 48, .height_mm = 84, }; diff --git a/drivers/gpu/drm/panel/panel-sony-acx565akm.c b/drivers/gpu/drm/panel/panel-sony-acx565akm.c index 5c4b6f6e5c2d..fc6a7e451abe 100644 --- a/drivers/gpu/drm/panel/panel-sony-acx565akm.c +++ b/drivers/gpu/drm/panel/panel-sony-acx565akm.c @@ -514,7 +514,6 @@ static const struct drm_display_mode acx565akm_mode = { .vsync_start = 480 + 3, .vsync_end = 480 + 3 + 3, .vtotal = 480 + 3 + 3 + 4, - .vrefresh = 57, .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, .width_mm = 77, diff --git a/drivers/gpu/drm/panel/panel-tpo-td028ttec1.c b/drivers/gpu/drm/panel/panel-tpo-td028ttec1.c index aeca15dfeb3c..58d683cc5215 100644 --- a/drivers/gpu/drm/panel/panel-tpo-td028ttec1.c +++ b/drivers/gpu/drm/panel/panel-tpo-td028ttec1.c @@ -281,7 +281,6 @@ static const struct drm_display_mode td028ttec1_mode = { .vsync_start = 640 + 4, .vsync_end = 640 + 4 + 2, .vtotal = 640 + 4 + 2 + 2, - .vrefresh = 66, .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, .width_mm = 43, diff --git a/drivers/gpu/drm/panel/panel-tpo-td043mtea1.c b/drivers/gpu/drm/panel/panel-tpo-td043mtea1.c index 75f1f1f1b6de..9b2a356c4d9a 100644 --- a/drivers/gpu/drm/panel/panel-tpo-td043mtea1.c +++ b/drivers/gpu/drm/panel/panel-tpo-td043mtea1.c @@ -339,7 +339,6 @@ static const struct drm_display_mode td043mtea1_mode = { .vsync_start = 480 + 39, .vsync_end = 480 + 39 + 1, .vtotal = 480 + 39 + 1 + 34, - .vrefresh = 60, .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, .width_mm = 94, diff --git a/drivers/gpu/drm/panel/panel-tpo-tpg110.c b/drivers/gpu/drm/panel/panel-tpo-tpg110.c index 8472d018c16f..c7a2f0ae5ba5 100644 --- a/drivers/gpu/drm/panel/panel-tpo-tpg110.c +++ b/drivers/gpu/drm/panel/panel-tpo-tpg110.c @@ -112,7 +112,6 @@ static const struct tpg110_panel_mode tpg110_modes[] = { .vsync_start = 480 + 10, .vsync_end = 480 + 10 + 1, .vtotal = 480 + 10 + 1 + 35, - .vrefresh = 60, }, .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, }, @@ -129,7 +128,6 @@ static const struct tpg110_panel_mode tpg110_modes[] = { .vsync_start = 480 + 18, .vsync_end = 480 + 18 + 1, .vtotal = 480 + 18 + 1 + 27, - .vrefresh = 60, }, .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, }, @@ -146,7 +144,6 @@ static const struct tpg110_panel_mode tpg110_modes[] = { .vsync_start = 272 + 2, .vsync_end = 272 + 2 + 1, .vtotal = 272 + 2 + 1 + 12, - .vrefresh = 60, }, .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, }, @@ -163,7 +160,6 @@ static const struct tpg110_panel_mode tpg110_modes[] = { .vsync_start = 640 + 4, .vsync_end = 640 + 4 + 1, .vtotal = 640 + 4 + 1 + 8, - .vrefresh = 60, }, .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, }, @@ -180,7 +176,6 @@ static const struct tpg110_panel_mode tpg110_modes[] = { .vsync_start = 240 + 2, .vsync_end = 240 + 2 + 1, .vtotal = 240 + 2 + 1 + 20, - .vrefresh = 60, }, .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, }, diff --git a/drivers/gpu/drm/panel/panel-truly-nt35597.c b/drivers/gpu/drm/panel/panel-truly-nt35597.c index f0ad6081570f..9b9c167b8dc8 100644 --- a/drivers/gpu/drm/panel/panel-truly-nt35597.c +++ b/drivers/gpu/drm/panel/panel-truly-nt35597.c @@ -534,7 +534,6 @@ static const struct drm_display_mode qcom_sdm845_mtp_2k_mode = { .vsync_start = 2560 + 8, .vsync_end = 2560 + 8 + 1, .vtotal = 2560 + 8 + 1 + 7, - .vrefresh = 60, .flags = 0, }; diff --git a/drivers/gpu/drm/panel/panel-visionox-rm69299.c b/drivers/gpu/drm/panel/panel-visionox-rm69299.c index 42f299ad3804..a12976b497ce 100644 --- a/drivers/gpu/drm/panel/panel-visionox-rm69299.c +++ b/drivers/gpu/drm/panel/panel-visionox-rm69299.c @@ -168,7 +168,6 @@ static const struct drm_display_mode visionox_rm69299_1080x2248_60hz = { .vsync_start = 2248 + 56, .vsync_end = 2248 + 56 + 4, .vtotal = 2248 + 56 + 4 + 4, - .vrefresh = 60, .flags = 0, }; diff --git a/drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c b/drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c index 1645aceab597..8a3b2f906e63 100644 --- a/drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c +++ b/drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c @@ -243,7 +243,6 @@ static const struct drm_display_mode default_mode = { .vsync_start = 1280 + 22, .vsync_end = 1280 + 22 + 4, .vtotal = 1280 + 22 + 4 + 11, - .vrefresh = 60, .clock = 64000, .width_mm = 68, .height_mm = 121, @@ -259,7 +258,7 @@ static int xpp055c272_get_modes(struct drm_panel *panel, if (!mode) { DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n", default_mode.hdisplay, default_mode.vdisplay, - default_mode.vrefresh); + drm_mode_vrefresh(&default_mode)); return -ENOMEM; } diff --git a/drivers/gpu/drm/sti/sti_hda.c b/drivers/gpu/drm/sti/sti_hda.c index a1ec891eaf3a..5c2b650b561d 100644 --- a/drivers/gpu/drm/sti/sti_hda.c +++ b/drivers/gpu/drm/sti/sti_hda.c @@ -586,7 +586,6 @@ static int sti_hda_connector_get_modes(struct drm_connector *connector) &hda_supported_modes[i].mode); if (!mode) continue; - mode->vrefresh = drm_mode_vrefresh(mode); /* the first mode is the preferred mode */ if (i == 0) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 04d66592f605..3c97654b5a43 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -2138,7 +2138,6 @@ void vmw_guess_mode_timing(struct drm_display_mode *mode) mode->vtotal = mode->vsync_end + 50; mode->clock = (u32)mode->htotal * (u32)mode->vtotal / 100 * 6; - mode->vrefresh = drm_mode_vrefresh(mode); } @@ -2212,7 +2211,6 @@ int vmw_du_connector_fill_modes(struct drm_connector *connector, mode = drm_mode_duplicate(dev, bmode); if (!mode) return 0; - mode->vrefresh = drm_mode_vrefresh(mode); drm_mode_probed_add(connector, mode); } diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h index 6a4c4b26caad..01ec0c6d1cb5 100644 --- a/include/drm/drm_modes.h +++ b/include/drm/drm_modes.h @@ -381,16 +381,6 @@ struct drm_display_mode { */ int private_flags; - /** - * @vrefresh: - * - * Vertical refresh rate, for debug output in human readable form. Not - * used in a functional way. - * - * This value is in Hz. - */ - int vrefresh; - /** * @picture_aspect_ratio: * @@ -422,7 +412,7 @@ struct drm_display_mode { * @m: display mode */ #define DRM_MODE_ARG(m) \ - (m)->name, (m)->vrefresh, (m)->clock, \ + (m)->name, drm_mode_vrefresh(m), (m)->clock, \ (m)->hdisplay, (m)->hsync_start, (m)->hsync_end, (m)->htotal, \ (m)->vdisplay, (m)->vsync_start, (m)->vsync_end, (m)->vtotal, \ (m)->type, (m)->flags -- cgit v1.2.3 From 7da156407615eeaf049c175a6bf2aa58e50d34ef Mon Sep 17 00:00:00 2001 From: Sidong Yang Date: Fri, 29 May 2020 02:21:59 +0900 Subject: Documentation: Fix typo error in todo.rst Change wrong function name drm_modest_lock_all() to drm_modeset_lock_all() Signed-off-by: Sidong Yang Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200528172159.24641-1-realwakka@gmail.com --- Documentation/gpu/todo.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 4c2b72f14316..d30c0e921df7 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -305,7 +305,7 @@ acquire context. Replace the boilerplate code surrounding drm_modeset_lock_all_ctx() with DRM_MODESET_LOCK_ALL_BEGIN() and DRM_MODESET_LOCK_ALL_END() instead. -This should also be done for all places where drm_modest_lock_all() is still +This should also be done for all places where drm_modeset_lock_all() is still used. As a reference, take a look at the conversions already completed in drm core. -- cgit v1.2.3 From e954f77f6330028ced7bac4ad22ea69ed64e5725 Mon Sep 17 00:00:00 2001 From: Simon Ser Date: Thu, 21 May 2020 11:09:31 +0000 Subject: drm: add docs for standard CRTC properties This patch adds docs for the ACTIVE and MODE_ID CRTC properties. Signed-off-by: Simon Ser Cc: Daniel Vetter Cc: Ville Syrjala Cc: Pekka Paalanen Cc: Michel Dänzer Cc: Daniel Stone Reviewed-by: Pekka Paalanen Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/k52vYFBQ5ZO18TgZl3W8MgP6f4qu5Ncir7w-On8Dm0V2KTAcVkUoS7-IGPcvDJAXLsyJAUsD0QFJts3Dy0yWyHXVh85axrZkybh3MGGFhQc=@emersion.fr --- Documentation/gpu/drm-kms.rst | 6 ++++++ drivers/gpu/drm/drm_crtc.c | 27 +++++++++++++++++++++++++++ 2 files changed, 33 insertions(+) (limited to 'Documentation') diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index 397314d08f77..975cfeb8a353 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -460,6 +460,12 @@ HDMI Specific Connector Properties .. kernel-doc:: drivers/gpu/drm/drm_connector.c :doc: HDMI connector properties +Standard CRTC Properties +------------------------ + +.. kernel-doc:: drivers/gpu/drm/drm_crtc.c + :doc: standard CRTC properties + Plane Composition Properties ---------------------------- diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 4936e1080e41..f1216088f65f 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -204,6 +204,33 @@ struct dma_fence *drm_crtc_create_fence(struct drm_crtc *crtc) return fence; } +/** + * DOC: standard CRTC properties + * + * DRM CRTCs have a few standardized properties: + * + * ACTIVE: + * Atomic property for setting the power state of the CRTC. When set to 1 + * the CRTC will actively display content. When set to 0 the CRTC will be + * powered off. There is no expectation that user-space will reset CRTC + * resources like the mode and planes when setting ACTIVE to 0. + * + * User-space can rely on an ACTIVE change to 1 to never fail an atomic + * test as long as no other property has changed. If a change to ACTIVE + * fails an atomic test, this is a driver bug. For this reason setting + * ACTIVE to 0 must not release internal resources (like reserved memory + * bandwidth or clock generators). + * + * Note that the legacy DPMS property on connectors is internally routed + * to control this property for atomic drivers. + * MODE_ID: + * Atomic property for setting the CRTC display timings. The value is the + * ID of a blob containing the DRM mode info. To disable the CRTC, + * user-space must set this property to 0. + * + * Setting MODE_ID to 0 will release reserved resources for the CRTC. + */ + /** * drm_crtc_init_with_planes - Initialise a new CRTC object with * specified primary and cursor planes. -- cgit v1.2.3 From 0b638559aa1a1964446dbc25e652035469f93cc9 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Mon, 11 May 2020 11:35:48 +0200 Subject: drm/doc: Some polish for shmem helpers - Move the shmem helper section to the drm-mm.rst file, next to the vram helpers. Makes a lot more sense there with the now wider scope. Also, that's where the all the other backing storage stuff resides. It's just the framebuffer helpers that should be in the kms helper section. - Try to clarify which functiosn are for implementing drm_gem_object_funcs, and which for drivers to call directly. At least one driver screwed that up a bit. Cc: Gerd Hoffmann Cc: Rob Herring Cc: Noralf Trønnes Reviewed-by: Thomas Zimmermann Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20200511093554.211493-4-daniel.vetter@ffwll.ch --- Documentation/gpu/drm-kms-helpers.rst | 12 ----------- Documentation/gpu/drm-mm.rst | 12 +++++++++++ drivers/gpu/drm/drm_gem_shmem_helper.c | 39 ++++++++++++++++++++++++++++------ 3 files changed, 44 insertions(+), 19 deletions(-) (limited to 'Documentation') diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst index ee730457bf4e..b89ddd06dabb 100644 --- a/Documentation/gpu/drm-kms-helpers.rst +++ b/Documentation/gpu/drm-kms-helpers.rst @@ -411,15 +411,3 @@ Legacy CRTC/Modeset Helper Functions Reference .. kernel-doc:: drivers/gpu/drm/drm_crtc_helper.c :export: - -SHMEM GEM Helper Reference -========================== - -.. kernel-doc:: drivers/gpu/drm/drm_gem_shmem_helper.c - :doc: overview - -.. kernel-doc:: include/drm/drm_gem_shmem_helper.h - :internal: - -.. kernel-doc:: drivers/gpu/drm/drm_gem_shmem_helper.c - :export: diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst index 8c8540ee859c..8d10e6b38918 100644 --- a/Documentation/gpu/drm-mm.rst +++ b/Documentation/gpu/drm-mm.rst @@ -370,6 +370,18 @@ GEM CMA Helper Functions Reference .. kernel-doc:: drivers/gpu/drm/drm_gem_cma_helper.c :export: +GEM SHMEM Helper Function Reference +----------------------------------- + +.. kernel-doc:: drivers/gpu/drm/drm_gem_shmem_helper.c + :doc: overview + +.. kernel-doc:: include/drm/drm_gem_shmem_helper.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_gem_shmem_helper.c + :export: + GEM VRAM Helper Functions Reference ----------------------------------- diff --git a/drivers/gpu/drm/drm_gem_shmem_helper.c b/drivers/gpu/drm/drm_gem_shmem_helper.c index 339eee79ea52..3885854e85a9 100644 --- a/drivers/gpu/drm/drm_gem_shmem_helper.c +++ b/drivers/gpu/drm/drm_gem_shmem_helper.c @@ -103,7 +103,8 @@ EXPORT_SYMBOL_GPL(drm_gem_shmem_create); * @obj: GEM object to free * * This function cleans up the GEM object state and frees the memory used to - * store the object itself. + * store the object itself. It should be used to implement + * &drm_gem_object_funcs.free. */ void drm_gem_shmem_free_object(struct drm_gem_object *obj) { @@ -214,7 +215,8 @@ EXPORT_SYMBOL(drm_gem_shmem_put_pages); * @obj: GEM object * * This function makes sure the backing pages are pinned in memory while the - * buffer is exported. + * buffer is exported. It should only be used to implement + * &drm_gem_object_funcs.pin. * * Returns: * 0 on success or a negative error code on failure. @@ -232,7 +234,7 @@ EXPORT_SYMBOL(drm_gem_shmem_pin); * @obj: GEM object * * This function removes the requirement that the backing pages are pinned in - * memory. + * memory. It should only be used to implement &drm_gem_object_funcs.unpin. */ void drm_gem_shmem_unpin(struct drm_gem_object *obj) { @@ -285,8 +287,14 @@ err_zero_use: * drm_gem_shmem_vmap - Create a virtual mapping for a shmem GEM object * @shmem: shmem GEM object * - * This function makes sure that a virtual address exists for the buffer backing - * the shmem GEM object. + * This function makes sure that a contiguous kernel virtual address mapping + * exists for the buffer backing the shmem GEM object. + * + * This function can be used to implement &drm_gem_object_funcs.vmap. But it can + * also be called by drivers directly, in which case it will hide the + * differences between dma-buf imported and natively allocated objects. + * + * Acquired mappings should be cleaned up by calling drm_gem_shmem_vunmap(). * * Returns: * 0 on success or a negative error code on failure. @@ -330,7 +338,13 @@ static void drm_gem_shmem_vunmap_locked(struct drm_gem_shmem_object *shmem) * drm_gem_shmem_vunmap - Unmap a virtual mapping fo a shmem GEM object * @shmem: shmem GEM object * - * This function removes the virtual address when use count drops to zero. + * This function cleans up a kernel virtual address mapping acquired by + * drm_gem_shmem_vmap(). The mapping is only removed when the use count drops to + * zero. + * + * This function can be used to implement &drm_gem_object_funcs.vmap. But it can + * also be called by drivers directly, in which case it will hide the + * differences between dma-buf imported and natively allocated objects. */ void drm_gem_shmem_vunmap(struct drm_gem_object *obj, void *vaddr) { @@ -559,6 +573,8 @@ EXPORT_SYMBOL_GPL(drm_gem_shmem_mmap); * @p: DRM printer * @indent: Tab indentation level * @obj: GEM object + * + * This implements the &drm_gem_object_funcs.info callback. */ void drm_gem_shmem_print_info(struct drm_printer *p, unsigned int indent, const struct drm_gem_object *obj) @@ -577,7 +593,12 @@ EXPORT_SYMBOL(drm_gem_shmem_print_info); * @obj: GEM object * * This function exports a scatter/gather table suitable for PRIME usage by - * calling the standard DMA mapping API. + * calling the standard DMA mapping API. Drivers should not call this function + * directly, instead it should only be used as an implementation for + * &drm_gem_object_funcs.get_sg_table. + * + * Drivers who need to acquire an scatter/gather table for objects need to call + * drm_gem_shmem_get_pages_sgt() instead. * * Returns: * A pointer to the scatter/gather table of pinned pages or NULL on failure. @@ -599,6 +620,10 @@ EXPORT_SYMBOL_GPL(drm_gem_shmem_get_sg_table); * the sg table doesn't exist, the pages are pinned, dma-mapped, and a sg * table created. * + * This is the main function for drivers to get at backing storage, and it hides + * and difference between dma-buf imported and natively allocated objects. + * drm_gem_shmem_get_sg_table() should not be directly called by drivers. + * * Returns: * A pointer to the scatter/gather table of pinned pages or errno on failure. */ -- cgit v1.2.3 From 85be9d713df38448f2b5433d3e23258c922b3003 Mon Sep 17 00:00:00 2001 From: Liu Ying Date: Mon, 1 Jun 2020 14:10:43 +0800 Subject: dt-bindings: panel-simple: Add koe,tx26d202vm0bwa compatible Add compatible to panel-simple for Kaohsiung Opto-Electronics Inc. 10.1" WUXGA(1920x1200) TX26D202VM0BWA TFT LCD panel with LVDS interface. Cc: Thierry Reding Cc: Sam Ravnborg Cc: Rob Herring Signed-off-by: Liu Ying Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/1590991843-24231-1-git-send-email-victor.liu@nxp.com --- Documentation/devicetree/bindings/display/panel/panel-simple.yaml | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index d6cca1479633..31e3efc73e00 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -157,6 +157,8 @@ properties: - innolux,zj070na-01p # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel - koe,tx14d24vm1bpa + # Kaohsiung Opto-Electronics Inc. 10.1" WUXGA (1920 x 1200) LVDS TFT LCD panel + - koe,tx26d202vm0bwa # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel - koe,tx31d200vm0baa # Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel -- cgit v1.2.3 From 094536003e06b315105d72ef321f3f87f6780c6b Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 27 May 2020 17:47:36 +0200 Subject: dt-bindings: display: Convert VC4 bindings to schemas The BCM283x SoCs have a display pipeline composed of several controllers with device tree bindings that are supported by Linux. Now that we have the DT validation in place, let's split into separate files and convert the device tree bindings for those controllers to schemas. This is just a 1:1 conversion though, and some bindings were incomplete so it results in example validation warnings that are going to be addressed in the following patches. Acked-by: Eric Anholt Reviewed: Rob Herring Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/2dc6384c945c7d35ab4f75464d3a77046dc125b3.1590594512.git-series.maxime@cerno.tech --- .../devicetree/bindings/display/brcm,bcm-vc4.txt | 174 --------------------- .../bindings/display/brcm,bcm2835-dpi.yaml | 66 ++++++++ .../bindings/display/brcm,bcm2835-dsi0.yaml | 73 +++++++++ .../bindings/display/brcm,bcm2835-hdmi.yaml | 75 +++++++++ .../bindings/display/brcm,bcm2835-hvs.yaml | 37 +++++ .../bindings/display/brcm,bcm2835-pixelvalve0.yaml | 40 +++++ .../bindings/display/brcm,bcm2835-txp.yaml | 37 +++++ .../bindings/display/brcm,bcm2835-v3d.yaml | 42 +++++ .../bindings/display/brcm,bcm2835-vc4.yaml | 34 ++++ .../bindings/display/brcm,bcm2835-vec.yaml | 44 ++++++ MAINTAINERS | 2 +- 11 files changed, 449 insertions(+), 175 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt deleted file mode 100644 index 26649b4c4dd8..000000000000 --- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt +++ /dev/null @@ -1,174 +0,0 @@ -Broadcom VC4 (VideoCore4) GPU - -The VC4 device present on the Raspberry Pi includes a display system -with HDMI output and the HVS (Hardware Video Scaler) for compositing -display planes. - -Required properties for VC4: -- compatible: Should be "brcm,bcm2835-vc4" or "brcm,cygnus-vc4" - -Required properties for Pixel Valve: -- compatible: Should be one of "brcm,bcm2835-pixelvalve0", - "brcm,bcm2835-pixelvalve1", or "brcm,bcm2835-pixelvalve2" -- reg: Physical base address and length of the PV's registers -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt - -Required properties for HVS: -- compatible: Should be "brcm,bcm2835-hvs" -- reg: Physical base address and length of the HVS's registers -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt - -Required properties for HDMI -- compatible: Should be "brcm,bcm2835-hdmi" -- reg: Physical base address and length of the two register ranges - ("HDMI" and "HD", in that order) -- interrupts: The interrupt numbers - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt -- ddc: phandle of the I2C controller used for DDC EDID probing -- clocks: a) hdmi: The HDMI state machine clock - b) pixel: The pixel clock. - -Optional properties for HDMI: -- hpd-gpios: The GPIO pin for HDMI hotplug detect (if it doesn't appear - as an interrupt/status bit in the HDMI controller - itself). See bindings/pinctrl/brcm,bcm2835-gpio.txt -- dmas: Should contain one entry pointing to the DMA channel used to - transfer audio data -- dma-names: Should contain "audio-rx" - -Required properties for DPI: -- compatible: Should be "brcm,bcm2835-dpi" -- reg: Physical base address and length of the registers -- clocks: a) core: The core clock the unit runs on - b) pixel: The pixel clock that feeds the pixelvalve -- port: Port node with a single endpoint connecting to the panel - device, as defined in [1] - -Required properties for VEC: -- compatible: Should be "brcm,bcm2835-vec" -- reg: Physical base address and length of the registers -- clocks: The core clock the unit runs on -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt - -Required properties for V3D: -- compatible: Should be "brcm,bcm2835-v3d" or "brcm,cygnus-v3d" -- reg: Physical base address and length of the V3D's registers -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt - -Optional properties for V3D: -- clocks: The clock the unit runs on - -Required properties for DSI: -- compatible: Should be "brcm,bcm2835-dsi0" or "brcm,bcm2835-dsi1" -- reg: Physical base address and length of the DSI block's registers -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt -- clocks: a) phy: The DSI PLL clock feeding the DSI analog PHY - b) escape: The DSI ESC clock from CPRMAN - c) pixel: The DSI pixel clock from CPRMAN -- clock-output-names: - The 3 clocks output from the DSI analog PHY: dsi[01]_byte, - dsi[01]_ddr2, and dsi[01]_ddr - -Required properties for the TXP (writeback) block: -- compatible: Should be "brcm,bcm2835-txp" -- reg: Physical base address and length of the TXP block's registers -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt - -[1] Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: -pixelvalve@7e807000 { - compatible = "brcm,bcm2835-pixelvalve2"; - reg = <0x7e807000 0x100>; - interrupts = <2 10>; /* pixelvalve */ -}; - -hvs@7e400000 { - compatible = "brcm,bcm2835-hvs"; - reg = <0x7e400000 0x6000>; - interrupts = <2 1>; -}; - -hdmi: hdmi@7e902000 { - compatible = "brcm,bcm2835-hdmi"; - reg = <0x7e902000 0x600>, - <0x7e808000 0x100>; - interrupts = <2 8>, <2 9>; - ddc = <&i2c2>; - hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; - clocks = <&clocks BCM2835_PLLH_PIX>, - <&clocks BCM2835_CLOCK_HSM>; - clock-names = "pixel", "hdmi"; -}; - -dpi: dpi@7e208000 { - compatible = "brcm,bcm2835-dpi"; - reg = <0x7e208000 0x8c>; - clocks = <&clocks BCM2835_CLOCK_VPU>, - <&clocks BCM2835_CLOCK_DPI>; - clock-names = "core", "pixel"; - #address-cells = <1>; - #size-cells = <0>; - - port { - dpi_out: endpoint@0 { - remote-endpoint = <&panel_in>; - }; - }; -}; - -dsi1: dsi@7e700000 { - compatible = "brcm,bcm2835-dsi1"; - reg = <0x7e700000 0x8c>; - interrupts = <2 12>; - #address-cells = <1>; - #size-cells = <0>; - #clock-cells = <1>; - - clocks = <&clocks BCM2835_PLLD_DSI1>, - <&clocks BCM2835_CLOCK_DSI1E>, - <&clocks BCM2835_CLOCK_DSI1P>; - clock-names = "phy", "escape", "pixel"; - - clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr"; - - pitouchscreen: panel@0 { - compatible = "raspberrypi,touchscreen"; - reg = <0>; - - <...> - }; -}; - -vec: vec@7e806000 { - compatible = "brcm,bcm2835-vec"; - reg = <0x7e806000 0x1000>; - clocks = <&clocks BCM2835_CLOCK_VEC>; - interrupts = <2 27>; -}; - -v3d: v3d@7ec00000 { - compatible = "brcm,bcm2835-v3d"; - reg = <0x7ec00000 0x1000>; - interrupts = <1 10>; -}; - -vc4: gpu { - compatible = "brcm,bcm2835-vc4"; -}; - -panel: panel { - compatible = "ontat,yx700wv03", "simple-panel"; - - port { - panel_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml new file mode 100644 index 000000000000..288494b70e82 --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-dpi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) DPI Controller + +maintainers: + - Eric Anholt + +properties: + compatible: + const: brcm,bcm2835-dpi + + reg: + maxItems: 1 + + clocks: + items: + - description: The core clock the unit runs on + - description: The pixel clock that feeds the pixelvalve + + port: + type: object + description: > + Port node with a single endpoint connecting to the panel, as + defined in Documentation/devicetree/bindings/media/video-interfaces.txt. + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + #include + + panel: panel { + compatible = "ontat,yx700wv03", "simple-panel"; + + port { + panel_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + + dpi: dpi@7e208000 { + compatible = "brcm,bcm2835-dpi"; + reg = <0x7e208000 0x8c>; + clocks = <&clocks BCM2835_CLOCK_VPU>, + <&clocks BCM2835_CLOCK_DPI>; + clock-names = "core", "pixel"; + + port { + dpi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml new file mode 100644 index 000000000000..3887675f844e --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-dsi0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) DSI Controller + +maintainers: + - Eric Anholt + +properties: + compatible: + enum: + - brcm,bcm2835-dsi0 + - brcm,bcm2835-dsi1 + + reg: + maxItems: 1 + + clocks: + items: + - description: The DSI PLL clock feeding the DSI analog PHY + - description: The DSI ESC clock + - description: The DSI pixel clock + + clock-output-names: true + # FIXME: The meta-schemas don't seem to allow it for now + # items: + # - description: The DSI byte clock for the PHY + # - description: The DSI DDR2 clock + # - description: The DSI DDR clock + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-output-names + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include + + dsi1: dsi@7e700000 { + compatible = "brcm,bcm2835-dsi1"; + reg = <0x7e700000 0x8c>; + interrupts = <2 12>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + clocks = <&clocks BCM2835_PLLD_DSI1>, + <&clocks BCM2835_CLOCK_DSI1E>, + <&clocks BCM2835_CLOCK_DSI1P>; + clock-names = "phy", "escape", "pixel"; + + clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr"; + + pitouchscreen: panel@0 { + compatible = "raspberrypi,touchscreen"; + reg = <0>; + + /* ... */ + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml new file mode 100644 index 000000000000..834cc5f1c254 --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) HDMI Controller + +maintainers: + - Eric Anholt + +properties: + compatible: + const: brcm,bcm2835-hdmi + + reg: + items: + - description: HDMI register range + - description: HD register range + + interrupts: + minItems: 2 + + clocks: + items: + - description: The HDMI state machine clock + - description: The pixel clock + + ddc: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + description: > + Phandle of the I2C controller used for DDC EDID probing + + hpd-gpios: + description: > + The GPIO pin for the HDMI hotplug detect (if it doesn't appear + as an interrupt/status bit in the HDMI controller itself) + + dmas: + maxItems: 1 + description: > + Should contain one entry pointing to the DMA channel used to + transfer audio data. + + dma-names: + const: audio-rx + +required: + - compatible + - reg + - interrupts + - clocks + - ddc + +additionalProperties: false + +examples: + - | + #include + #include + + hdmi: hdmi@7e902000 { + compatible = "brcm,bcm2835-hdmi"; + reg = <0x7e902000 0x600>, + <0x7e808000 0x100>; + interrupts = <2 8>, <2 9>; + ddc = <&i2c2>; + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + clocks = <&clocks BCM2835_PLLH_PIX>, + <&clocks BCM2835_CLOCK_HSM>; + clock-names = "pixel", "hdmi"; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml new file mode 100644 index 000000000000..02410f8d6d49 --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-hvs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) Hardware Video Scaler + +maintainers: + - Eric Anholt + +properties: + compatible: + const: brcm,bcm2835-hvs + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + hvs@7e400000 { + compatible = "brcm,bcm2835-hvs"; + reg = <0x7e400000 0x6000>; + interrupts = <2 1>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml new file mode 100644 index 000000000000..e60791db1fa1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-pixelvalve0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) PixelValve + +maintainers: + - Eric Anholt + +properties: + compatible: + enum: + - brcm,bcm2835-pixelvalve0 + - brcm,bcm2835-pixelvalve1 + - brcm,bcm2835-pixelvalve2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + pixelvalve@7e807000 { + compatible = "brcm,bcm2835-pixelvalve2"; + reg = <0x7e807000 0x100>; + interrupts = <2 10>; /* pixelvalve */ + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml new file mode 100644 index 000000000000..bb186197e471 --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-txp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) TXP (writeback) Controller + +maintainers: + - Eric Anholt + +properties: + compatible: + const: brcm,bcm2835-txp + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + txp: txp@7e004000 { + compatible = "brcm,bcm2835-txp"; + reg = <0x7e004000 0x20>; + interrupts = <1 11>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml new file mode 100644 index 000000000000..8a73780f573d --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-v3d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) V3D GPU + +maintainers: + - Eric Anholt + +properties: + compatible: + enum: + - brcm,bcm2835-v3d + - brcm,cygnus-v3d + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + v3d: v3d@7ec00000 { + compatible = "brcm,bcm2835-v3d"; + reg = <0x7ec00000 0x1000>; + interrupts = <1 10>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml new file mode 100644 index 000000000000..0dcf0c397375 --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-vc4.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) GPU + +maintainers: + - Eric Anholt + +description: > + The VC4 device present on the Raspberry Pi includes a display system + with HDMI output and the HVS (Hardware Video Scaler) for compositing + display planes. + +properties: + compatible: + enum: + - brcm,bcm2835-vc4 + - brcm,cygnus-vc4 + +required: + - compatible + +additionalProperties: false + +examples: + - | + vc4: gpu { + compatible = "brcm,bcm2835-vc4"; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml new file mode 100644 index 000000000000..d900cc57b4ec --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-vec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) VEC + +maintainers: + - Eric Anholt + +properties: + compatible: + const: brcm,bcm2835-vec + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include + + vec: vec@7e806000 { + compatible = "brcm,bcm2835-vec"; + reg = <0x7e806000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = <2 27>; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index 938316092634..d59c5d34d3b9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5754,7 +5754,7 @@ M: Eric Anholt S: Supported T: git git://github.com/anholt/linux T: git git://anongit.freedesktop.org/drm/drm-misc -F: Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt +F: Documentation/devicetree/bindings/display/brcm,bcm2835-*.yaml F: drivers/gpu/drm/vc4/ F: include/uapi/drm/vc4_drm.h -- cgit v1.2.3 From 143ea9a3bc6c4d50dbab4f6aae94173542f56b41 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 27 May 2020 17:47:37 +0200 Subject: dt-bindings: display: vc4: dpi: Add missing clock-names property While the device tree and the driver expected a clock-names property, it wasn't explicitly documented in the previous binding. Make sure it is now. Cc: devicetree@vger.kernel.org Reviewed-by: Eric Anholt Reviewed-by: Rob Herring Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/8c7a4a9d85f7d1b23346367acf8d321ddad7cffe.1590594512.git-series.maxime@cerno.tech --- Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml index 288494b70e82..58213c564e03 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml @@ -21,6 +21,11 @@ properties: - description: The core clock the unit runs on - description: The pixel clock that feeds the pixelvalve + clock-names: + items: + - const: core + - const: pixel + port: type: object description: > @@ -31,6 +36,7 @@ required: - compatible - reg - clocks + - clock-names - port additionalProperties: false -- cgit v1.2.3 From fd26eea70e019b5e65b6de196fefba74a5bd5641 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 27 May 2020 17:47:38 +0200 Subject: dt-bindings: display: vc4: dsi: Add missing clock properties While the device tree and the driver expected a clock-names and a clock-cells properties, it wasn't explicitly documented in the previous binding. Make sure it is now. Cc: devicetree@vger.kernel.org Reviewed-by: Eric Anholt Reviewed-by: Rob Herring Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/867813ae6b3e9cff0e9627e6ed09569dee5573bc.1590594512.git-series.maxime@cerno.tech --- .../devicetree/bindings/display/brcm,bcm2835-dsi0.yaml | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml index 3887675f844e..3c643b227a70 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml @@ -10,6 +10,9 @@ maintainers: - Eric Anholt properties: + "#clock-cells": + const: 1 + compatible: enum: - brcm,bcm2835-dsi0 @@ -24,6 +27,12 @@ properties: - description: The DSI ESC clock - description: The DSI pixel clock + clock-names: + items: + - const: phy + - const: escape + - const: pixel + clock-output-names: true # FIXME: The meta-schemas don't seem to allow it for now # items: @@ -35,9 +44,11 @@ properties: maxItems: 1 required: + - "#clock-cells" - compatible - reg - clocks + - clock-names - clock-output-names - interrupts -- cgit v1.2.3 From 408e7e8a3c6d8a79cf6fba9562837eab5830ad62 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 27 May 2020 17:47:39 +0200 Subject: dt-bindings: display: vc4: hdmi: Add missing clock-names property While the device tree and the driver expected a clock-names property, it wasn't explicitly documented in the previous binding. The documented order was wrong too, so make sure clock-names is there and in the proper order. Cc: devicetree@vger.kernel.org Reviewed-by: Eric Anholt Reviewed-by: Rob Herring Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/10ef2821e10886b66af5f8ba3e212aa87e9fd360.1590594512.git-series.maxime@cerno.tech --- Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml index 834cc5f1c254..52b3cdac0bdf 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml @@ -23,8 +23,13 @@ properties: clocks: items: - - description: The HDMI state machine clock - description: The pixel clock + - description: The HDMI state machine clock + + clock-names: + items: + - const: pixel + - const: hdmi ddc: allOf: -- cgit v1.2.3 From c32747993871e95ff40ed37a373172b9004e9759 Mon Sep 17 00:00:00 2001 From: Emil Velikov Date: Wed, 3 Jun 2020 18:04:34 +0100 Subject: drm/todo: Add item about modeset properties Add some information about pre-atomic modeset properties alongside a list of suggestions how to handle the different instances. Signed-off-by: Emil Velikov Acked-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20200603170434.2363446-1-emil.l.velikov@gmail.com --- Documentation/gpu/todo.rst | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'Documentation') diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index d30c0e921df7..7969f106877d 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -372,6 +372,38 @@ Contact: Laurent Pinchart, respective driver maintainers Level: Intermediate +Consolidate custom driver modeset properties +-------------------------------------------- + +Before atomic modeset took place, many drivers where creating their own +properties. Among other things, atomic brought the requirement that custom, +driver specific properties should not be used. + +For this task, we aim to introduce core helpers or reuse the existing ones +if available: + +A quick, unconfirmed, examples list. + +Introduce core helpers: +- audio (amdgpu, intel, gma500, radeon) +- brightness, contrast, etc (armada, nouveau) - overlay only (?) +- broadcast rgb (gma500, intel) +- colorkey (armada, nouveau, rcar) - overlay only (?) +- dither (amdgpu, nouveau, radeon) - varies across drivers +- underscan family (amdgpu, radeon, nouveau) + +Already in core: +- colorspace (sti) +- tv format names, enhancements (gma500, intel) +- tv overscan, margins, etc. (gma500, intel) +- zorder (omapdrm) - same as zpos (?) + + +Contact: Emil Velikov, respective driver maintainers + +Level: Intermediate + + Core refactorings ================= -- cgit v1.2.3 From 1dd8915291d58f8d89b67b24e5f4b52a0fa633bb Mon Sep 17 00:00:00 2001 From: Ricardo Cañuelo Date: Wed, 17 Jun 2020 11:46:30 +0200 Subject: dt-bindings: display: ti,tfp410.txt: convert to yaml Convert the DT binding documentation for the TI TFP410 DPI-to-DVI encoder to json-schema. Signed-off-by: Ricardo Cañuelo Reviewed-by: Laurent Pinchart Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200617094633.19663-2-ricardo.canuelo@collabora.com --- .../bindings/display/bridge/ti,tfp410.txt | 66 ----------- .../bindings/display/bridge/ti,tfp410.yaml | 130 +++++++++++++++++++++ 2 files changed, 130 insertions(+), 66 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt deleted file mode 100644 index 5ff4f64ef8e8..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt +++ /dev/null @@ -1,66 +0,0 @@ -TFP410 DPI to DVI encoder -========================= - -Required properties: -- compatible: "ti,tfp410" - -Optional properties: -- powerdown-gpios: power-down gpio -- reg: I2C address. If and only if present the device node should be placed - into the I2C controller node where the TFP410 I2C is connected to. -- ti,deskew: data de-skew in 350ps increments, from -4 to +3, as configured - through th DK[3:1] pins. This property shall be present only if the TFP410 - is not connected through I2C. - -Required nodes: - -This device has two video ports. Their connections are modeled using the OF -graph bindings specified in [1]. Each port node shall have a single endpoint. - -- Port 0 is the DPI input port. Its endpoint subnode shall contain a - pclk-sample and bus-width property and a remote-endpoint property as specified - in [1]. - - If pclk-sample is not defined, pclk-sample = 0 should be assumed for - backward compatibility. - - If bus-width is not defined then bus-width = 24 should be assumed for - backward compatibility. - bus-width = 24: 24 data lines are connected and single-edge mode - bus-width = 12: 12 data lines are connected and dual-edge mode - -- Port 1 is the DVI output port. Its endpoint subnode shall contain a - remote-endpoint property is specified in [1]. - -[1] Documentation/devicetree/bindings/media/video-interfaces.txt - - -Example -------- - -tfp410: encoder@0 { - compatible = "ti,tfp410"; - powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; - ti,deskew = <4>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tfp410_in: endpoint@0 { - pclk-sample = <1>; - bus-width = <24>; - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - - tfp410_out: endpoint@0 { - remote-endpoint = <&dvi_connector_in>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml new file mode 100644 index 000000000000..5569a4907765 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,tfp410.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TFP410 DPI to DVI encoder + +maintainers: + - Tomi Valkeinen + - Jyri Sarha + +properties: + compatible: + const: ti,tfp410 + + reg: + description: I2C address of the device. + maxItems: 1 + + powerdown-gpios: + maxItems: 1 + + ti,deskew: + description: + Data de-skew in 350ps increments, from -4 to +3, as configured + through th DK[3:1] pins. This property shall be present only if the TFP410 + is not connected through I2C. + maxItems: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + + ports: + description: + A node containing input and output port nodes with endpoint + definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + type: object + + properties: + port@0: + description: DPI input port. + type: object + + properties: + reg: + const: 0 + + endpoint: + type: object + + properties: + pclk-sample: + description: + Endpoint sampling edge. + enum: + - 0 # Falling edge + - 1 # Rising edge + default: 0 + + bus-width: + description: + Endpoint bus width. + enum: + - 12 # 12 data lines connected and dual-edge mode + - 24 # 24 data lines connected and single-edge mode + default: 24 + + port@1: + description: DVI output port. + type: object + + properties: + reg: + const: 1 + + endpoint: + type: object + + required: + - port@0 + - port@1 + +required: + - compatible + - ports + +if: + required: + - reg +then: + properties: + ti,deskew: false +else: + required: + - ti,deskew + +additionalProperties: false + +examples: + - | + #include + + tfp410: encoder { + compatible = "ti,tfp410"; + powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; + ti,deskew = <3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tfp410_in: endpoint { + pclk-sample = <1>; + bus-width = <24>; + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + tfp410_out: endpoint { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + +... -- cgit v1.2.3 From 520a994de09ea2f2d6d93919e6b6e0d2864c52b9 Mon Sep 17 00:00:00 2001 From: Ricardo Cañuelo Date: Wed, 17 Jun 2020 11:46:31 +0200 Subject: dt-bindings: display: ti, tfp410.yaml: Redefine ti, deskew property This changes how the 'ti,deskew' property is defined. It's now an unsigned value from 0 to 7 instead of a signed value from -4 to 3. Until the dtc carries the integer sign through to the yaml output it's easier to define signed types as unsigned. Signed-off-by: Ricardo Cañuelo Reviewed-by: Laurent Pinchart Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200617094633.19663-3-ricardo.canuelo@collabora.com --- Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml index 5569a4907765..605831c1e836 100644 --- a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml @@ -23,11 +23,12 @@ properties: ti,deskew: description: - Data de-skew in 350ps increments, from -4 to +3, as configured - through th DK[3:1] pins. This property shall be present only if the TFP410 - is not connected through I2C. - maxItems: 1 + Data de-skew value in 350ps increments, from 0 to 7, as configured + through the DK[3:1] pins. The de-skew multiplier is computed as + (DK[3:1] - 4), so it ranges from -4 to 3. $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 ports: description: -- cgit v1.2.3 From 290855d538dc6a800e1b47c8e12a2e8cc810caa2 Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Fri, 12 Jun 2020 09:22:16 +0200 Subject: dt-bindings: display: simple: add CDTech S070PWS19HP-FC21 and S070SWV29HG-DC44 Add the CDTech Electronics displays S070PWS19HP-FC21 (7.0" WSVGA) and S070SWV29HG-DC44 (7.0" WVGA) to the panel-simple compatible list. Signed-off-by: Matthias Schiffer Reviewed-by: Rob Herring Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200612072219.13669-2-matthias.schiffer@ew.tq-group.com --- Documentation/devicetree/bindings/display/panel/panel-simple.yaml | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 31e3efc73e00..2ddb520edc6d 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -81,6 +81,10 @@ properties: - boe,nv140fhmn49 # CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel - cdtech,s043wq26h-ct7 + # CDTech(H.K.) Electronics Limited 7" WSVGA (1024x600) TFT LCD Panel + - cdtech,s070pws19hp-fc21 + # CDTech(H.K.) Electronics Limited 7" WVGA (800x480) TFT LCD Panel + - cdtech,s070swv29hg-dc44 # CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel - cdtech,s070wv95-ct16 # Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel -- cgit v1.2.3 From ac4a36ee277d2930d202d418077b98acb143ed87 Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Fri, 12 Jun 2020 09:22:17 +0200 Subject: dt-bindings: display: simple: add Tianma TM070JVHG33 Add the Tianma Micro-electronics TM070JVHG33 7.0" WXGA display to the panel-simple compatible list. Signed-off-by: Matthias Schiffer Reviewed-by: Rob Herring Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200612072219.13669-3-matthias.schiffer@ew.tq-group.com --- Documentation/devicetree/bindings/display/panel/panel-simple.yaml | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 2ddb520edc6d..6deeeed59e59 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -251,6 +251,8 @@ properties: - starry,kr122ea0sra # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel - tianma,tm070jdhg30 + # Tianma Micro-electronics TM070JVHG33 7.0" WXGA TFT LCD panel + - tianma,tm070jvhg33 # Tianma Micro-electronics TM070RVHG71 7.0" WXGA TFT LCD panel - tianma,tm070rvhg71 # Toshiba 8.9" WXGA (1280x768) TFT LCD panel -- cgit v1.2.3 From 102514ec73ed54b2681ff225e78e965e4fbe43ef Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Fri, 12 Jun 2020 09:05:35 +0200 Subject: dma-buf: minor doc touch-ups Just some tiny edits: - fix link to struct dma_fence - give slightly more meaningful title - the polling here is about implicit fences, explicit fences (in sync_file or drm_syncobj) also have their own polling v2: I misplaced the .rst include change corresponding to this patch. Reviewed-by: Thomas Hellstrom Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20200612070535.1778368-1-daniel.vetter@ffwll.ch --- Documentation/driver-api/dma-buf.rst | 6 +++--- drivers/dma-buf/dma-buf.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/driver-api/dma-buf.rst b/Documentation/driver-api/dma-buf.rst index 63dec76d1d8d..7fb7b661febd 100644 --- a/Documentation/driver-api/dma-buf.rst +++ b/Documentation/driver-api/dma-buf.rst @@ -100,11 +100,11 @@ CPU Access to DMA Buffer Objects .. kernel-doc:: drivers/dma-buf/dma-buf.c :doc: cpu access -Fence Poll Support -~~~~~~~~~~~~~~~~~~ +Implicit Fence Poll Support +~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. kernel-doc:: drivers/dma-buf/dma-buf.c - :doc: fence polling + :doc: implicit fence polling Kernel Functions and Structures Reference ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c index 570c923023e6..7ca24080fea0 100644 --- a/drivers/dma-buf/dma-buf.c +++ b/drivers/dma-buf/dma-buf.c @@ -161,11 +161,11 @@ static loff_t dma_buf_llseek(struct file *file, loff_t offset, int whence) } /** - * DOC: fence polling + * DOC: implicit fence polling * * To support cross-device and cross-driver synchronization of buffer access - * implicit fences (represented internally in the kernel with &struct fence) can - * be attached to a &dma_buf. The glue for that and a few related things are + * implicit fences (represented internally in the kernel with &struct dma_fence) + * can be attached to a &dma_buf. The glue for that and a few related things are * provided in the &dma_resv structure. * * Userspace can query the state of these implicitly tracked fences using poll() -- cgit v1.2.3 From 1a6922ee0fbbc565dcc231e83bae0eeac5b379db Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 15 May 2020 00:42:11 +0300 Subject: dt-bindings: display: bridge: renesas,lvds: Convert binding to YAML Convert the Renesas R-Car LVDS encoder text binding to YAML. Signed-off-by: Laurent Pinchart Acked-by: Maxime Ripard Reviewed-by: Rob Herring Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200514214211.9036-1-laurent.pinchart+renesas@ideasonboard.com --- .../bindings/display/bridge/renesas,lvds.txt | 85 ------- .../bindings/display/bridge/renesas,lvds.yaml | 248 +++++++++++++++++++++ 2 files changed, 248 insertions(+), 85 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt deleted file mode 100644 index c62ce2494ed9..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt +++ /dev/null @@ -1,85 +0,0 @@ -Renesas R-Car LVDS Encoder -========================== - -These DT bindings describe the LVDS encoder embedded in the Renesas R-Car -Gen2, R-Car Gen3 and RZ/G SoCs. - -Required properties: - -- compatible : Shall contain one of - - "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders - - "renesas,r8a7744-lvds" for R8A7744 (RZ/G1N) compatible LVDS encoders - - "renesas,r8a774a1-lvds" for R8A774A1 (RZ/G2M) compatible LVDS encoders - - "renesas,r8a774b1-lvds" for R8A774B1 (RZ/G2N) compatible LVDS encoders - - "renesas,r8a774c0-lvds" for R8A774C0 (RZ/G2E) compatible LVDS encoders - - "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders - - "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders - - "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders - - "renesas,r8a7795-lvds" for R8A7795 (R-Car H3) compatible LVDS encoders - - "renesas,r8a7796-lvds" for R8A7796 (R-Car M3-W) compatible LVDS encoders - - "renesas,r8a77965-lvds" for R8A77965 (R-Car M3-N) compatible LVDS encoders - - "renesas,r8a77970-lvds" for R8A77970 (R-Car V3M) compatible LVDS encoders - - "renesas,r8a77980-lvds" for R8A77980 (R-Car V3H) compatible LVDS encoders - - "renesas,r8a77990-lvds" for R8A77990 (R-Car E3) compatible LVDS encoders - - "renesas,r8a77995-lvds" for R8A77995 (R-Car D3) compatible LVDS encoders - -- reg: Base address and length for the memory-mapped registers -- clocks: A list of phandles + clock-specifier pairs, one for each entry in - the clock-names property. -- clock-names: Name of the clocks. This property is model-dependent. - - The functional clock, which mandatory for all models, shall be listed - first, and shall be named "fck". - - On R8A77990, R8A77995 and R8A774C0, the LVDS encoder can use the EXTAL or - DU_DOTCLKINx clocks. Those clocks are optional. When supplied they must be - named "extal" and "dclkin.x" respectively, with "x" being the DU_DOTCLKIN - numerical index. - - When the clocks property only contains the functional clock, the - clock-names property may be omitted. -- resets: A phandle + reset specifier for the module reset - -Required nodes: - -The LVDS encoder has two video ports. Their connections are modelled using the -OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 corresponds to the parallel RGB input -- Video port 1 corresponds to the LVDS output - -Each port shall have a single endpoint. - -Optional properties: - -- renesas,companion : phandle to the companion LVDS encoder. This property is - mandatory for the first LVDS encoder on D3 and E3 SoCs, and shall point to - the second encoder to be used as a companion in dual-link mode. It shall not - be set for any other LVDS encoder. - - -Example: - - lvds0: lvds@feb90000 { - compatible = "renesas,r8a77990-lvds"; - reg = <0 0xfeb90000 0 0x20>; - clocks = <&cpg CPG_MOD 727>; - power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; - resets = <&cpg 727>; - - renesas,companion = <&lvds1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - lvds0_in: endpoint { - remote-endpoint = <&du_out_lvds0>; - }; - }; - port@1 { - reg = <1>; - lvds0_out: endpoint { - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml new file mode 100644 index 000000000000..98c7330a9485 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml @@ -0,0 +1,248 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/renesas,lvds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car LVDS Encoder + +maintainers: + - Laurent Pinchart + +description: | + These DT bindings describe the LVDS encoder embedded in the Renesas R-Car + Gen2, R-Car Gen3, RZ/G1 and RZ/G2 SoCs. + +properties: + compatible: + enum: + - renesas,r8a7743-lvds # for RZ/G1M compatible LVDS encoders + - renesas,r8a7744-lvds # for RZ/G1N compatible LVDS encoders + - renesas,r8a774a1-lvds # for RZ/G2M compatible LVDS encoders + - renesas,r8a774b1-lvds # for RZ/G2N compatible LVDS encoders + - renesas,r8a774c0-lvds # for RZ/G2E compatible LVDS encoders + - renesas,r8a7790-lvds # for R-Car H2 compatible LVDS encoders + - renesas,r8a7791-lvds # for R-Car M2-W compatible LVDS encoders + - renesas,r8a7793-lvds # for R-Car M2-N compatible LVDS encoders + - renesas,r8a7795-lvds # for R-Car H3 compatible LVDS encoders + - renesas,r8a7796-lvds # for R-Car M3-W compatible LVDS encoders + - renesas,r8a77965-lvds # for R-Car M3-N compatible LVDS encoders + - renesas,r8a77970-lvds # for R-Car V3M compatible LVDS encoders + - renesas,r8a77980-lvds # for R-Car V3H compatible LVDS encoders + - renesas,r8a77990-lvds # for R-Car E3 compatible LVDS encoders + - renesas,r8a77995-lvds # for R-Car D3 compatible LVDS encoders + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + + resets: + maxItems: 1 + + ports: + type: object + description: | + This device has two video ports. Their connections are modelled using the + OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. + Each port shall have a single endpoint. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + port@0: + type: object + description: Parallel RGB input port + + port@1: + type: object + description: LVDS output port + + required: + - port@0 + - port@1 + + additionalProperties: false + + power-domains: + maxItems: 1 + + renesas,companion: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the companion LVDS encoder. This property is mandatory + for the first LVDS encoder on D3 and E3 SoCs, and shall point to + the second encoder to be used as a companion in dual-link mode. It + shall not be set for any other LVDS encoder. + +required: + - compatible + - reg + - clocks + - power-domains + - resets + - ports + +if: + properties: + compatible: + enum: + - renesas,r8a774c0-lvds + - renesas,r8a77990-lvds + - renesas,r8a77995-lvds +then: + properties: + clocks: + minItems: 1 + maxItems: 4 + items: + - description: Functional clock + - description: EXTAL input clock + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + + clock-names: + minItems: 1 + maxItems: 4 + items: + - const: fck + # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks. + # These clocks are optional. + - enum: + - extal + - dclkin.0 + - dclkin.1 + - enum: + - extal + - dclkin.0 + - dclkin.1 + - enum: + - extal + - dclkin.0 + - dclkin.1 + + required: + - clock-names + +else: + properties: + clocks: + maxItems: 1 + items: + - description: Functional clock + + clock-names: + maxItems: 1 + items: + - const: fck + + renesas,companion: false + +additionalProperties: false + +examples: + - | + #include + #include + + lvds@feb90000 { + compatible = "renesas,r8a7795-lvds"; + reg = <0xfeb90000 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 727>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + + - | + #include + #include + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a77990-lvds"; + reg = <0xfeb90000 0x20>; + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 727>; + + renesas,companion = <&lvds1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { + remote-endpoint = <&panel_in1>; + }; + }; + }; + }; + + lvds1: lvds@feb90100 { + compatible = "renesas,r8a77990-lvds"; + reg = <0xfeb90100 0x20>; + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 726>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds1_in: endpoint { + remote-endpoint = <&du_out_lvds1>; + }; + }; + port@1 { + reg = <1>; + lvds1_out: endpoint { + remote-endpoint = <&panel_in2>; + }; + }; + }; + }; + +... -- cgit v1.2.3 From e9d636ab77ea2d1beeaf2bbb881331318ea5a6eb Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 26 Jun 2020 14:11:31 +0200 Subject: dt-bindings: display: vc4: dpi: Fix panel warning The example used in the DPI binding before the conversion to YAML had a simple-panel example that got carried over to the YAML binding. However, that example doesn't match the simple-panel binding and results in validation errors. Since it's only marginally helpful, let's remove that part of the example entirely. Fixes: 094536003e06 ("dt-bindings: display: Convert VC4 bindings to schemas") Signed-off-by: Maxime Ripard Acked-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200626121131.127192-1-maxime@cerno.tech --- .../devicetree/bindings/display/brcm,bcm2835-dpi.yaml | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml index 58213c564e03..5c1024bbc1b3 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml @@ -45,16 +45,6 @@ examples: - | #include - panel: panel { - compatible = "ontat,yx700wv03", "simple-panel"; - - port { - panel_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - }; - dpi: dpi@7e208000 { compatible = "brcm,bcm2835-dpi"; reg = <0x7e208000 0x8c>; -- cgit v1.2.3 From 5f5df8b4253f12dbc0b9e328b3334ce28c16fc08 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Wed, 1 Jul 2020 18:29:16 +0200 Subject: dt-bindings: vendor-prefixes: Add Xingbangda Shenzhen Xingbangda Display Technology Co., Ltd is a company which produces LCD modules. It supplies the LCD panels for the PinePhone. Add the vendor prefix of it. Signed-off-by: Icenowy Zheng Signed-off-by: Ondrej Jirman Acked-by: Rob Herring Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-2-megous@megous.com --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 9aeab66be85f..740b116b179f 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1157,6 +1157,8 @@ patternProperties: description: Xiaomi Technology Co., Ltd. "^xillybus,.*": description: Xillybus Ltd. + "^xingbangda,.*": + description: Shenzhen Xingbangda Display Technology Co., Ltd "^xinpeng,.*": description: Shenzhen Xinpeng Technology Co., Ltd "^xlnx,.*": -- cgit v1.2.3 From 7317f45744922071ddee43b7d46a3cd9758b1157 Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Wed, 1 Jul 2020 18:29:17 +0200 Subject: dt-bindings: panel: Convert rocktech,jh057n00900 to yaml Convert Rocktech MIPI DSI panel driver from txt to yaml bindings. Signed-off-by: Ondrej Jirman Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-3-megous@megous.com --- .../display/panel/rocktech,jh057n00900.txt | 23 -------- .../display/panel/rocktech,jh057n00900.yaml | 66 ++++++++++++++++++++++ 2 files changed, 66 insertions(+), 23 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt create mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt deleted file mode 100644 index a372c5d84695..000000000000 --- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt +++ /dev/null @@ -1,23 +0,0 @@ -Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel - -Required properties: -- compatible: should be "rocktech,jh057n00900" -- reg: DSI virtual channel of the peripheral -- reset-gpios: panel reset gpio -- backlight: phandle of the backlight device attached to the panel -- vcc-supply: phandle of the regulator that provides the vcc supply voltage. -- iovcc-supply: phandle of the regulator that provides the iovcc supply - voltage. - -Example: - - &mipi_dsi { - panel@0 { - compatible = "rocktech,jh057n00900"; - reg = <0>; - backlight = <&backlight>; - reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; - vcc-supply = <®_2v8_p>; - iovcc-supply = <®_1v8_p>; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml new file mode 100644 index 000000000000..928ba42e7f8d --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel + +maintainers: + - Ondrej Jirman + +description: | + Rocktech JH057N00900 is a 720x1440 TFT LCD panel + connected using a MIPI-DSI video interface. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: rocktech,jh057n00900 + + reg: + maxItems: 1 + description: DSI virtual channel + + vcc-supply: + description: Panel power supply + + iovcc-supply: + description: I/O voltage supply + + reset-gpios: + description: GPIO used for the reset pin + maxItems: 1 + + backlight: + description: Backlight used by the panel + $ref: "/schemas/types.yaml#/definitions/phandle" + +required: + - compatible + - reg + - vcc-supply + - iovcc-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "rocktech,jh057n00900"; + reg = <0>; + vcc-supply = <®_2v8_p>; + iovcc-supply = <®_1v8_p>; + reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + }; + }; +... -- cgit v1.2.3 From 3955c0c4a99d95508a4cff4f8f53379e5ed39ddd Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Wed, 1 Jul 2020 18:29:18 +0200 Subject: dt-bindings: panel: Add compatible for Xingbangda XBD599 panel Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel. It is based on Sitronix ST7703 LCD controller just like rocktech,jh057n00900. It is used in PinePhone. Add a compatible for it. Signed-off-by: Ondrej Jirman Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-4-megous@megous.com --- .../devicetree/bindings/display/panel/rocktech,jh057n00900.yaml | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml index 928ba42e7f8d..a6985cd947fb 100644 --- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml @@ -18,7 +18,11 @@ allOf: properties: compatible: - const: rocktech,jh057n00900 + enum: + # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel + - rocktech,jh057n00900 + # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel + - xingbangda,xbd599 reg: maxItems: 1 -- cgit v1.2.3 From f2230d1313c63b638ff8af782c4c202307c5d6fc Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 30 Jun 2020 14:02:16 -0600 Subject: dt-bindings: display: Convert connectors to DT schema Convert the analog TV, DVI, HDMI, and VGA connector bindings to DT schema format. Reviewed-by: Laurent Pinchart Reviewed-by: Maxime Ripard Reviewed-by: Sam Ravnborg Acked-by: Sam Ravnborg Signed-off-by: Rob Herring Link: https://patchwork.freedesktop.org/patch/msgid/20200630200216.1172566-1-robh@kernel.org --- .../display/connector/analog-tv-connector.txt | 31 ---------- .../display/connector/analog-tv-connector.yaml | 52 ++++++++++++++++ .../bindings/display/connector/dvi-connector.txt | 36 ----------- .../bindings/display/connector/dvi-connector.yaml | 70 ++++++++++++++++++++++ .../bindings/display/connector/hdmi-connector.txt | 31 ---------- .../bindings/display/connector/hdmi-connector.yaml | 64 ++++++++++++++++++++ .../bindings/display/connector/vga-connector.txt | 36 ----------- .../bindings/display/connector/vga-connector.yaml | 46 ++++++++++++++ 8 files changed, 232 insertions(+), 134 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt create mode 100644 Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml delete mode 100644 Documentation/devicetree/bindings/display/connector/dvi-connector.txt create mode 100644 Documentation/devicetree/bindings/display/connector/dvi-connector.yaml delete mode 100644 Documentation/devicetree/bindings/display/connector/hdmi-connector.txt create mode 100644 Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml delete mode 100644 Documentation/devicetree/bindings/display/connector/vga-connector.txt create mode 100644 Documentation/devicetree/bindings/display/connector/vga-connector.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt deleted file mode 100644 index 883bcb2604c7..000000000000 --- a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt +++ /dev/null @@ -1,31 +0,0 @@ -Analog TV Connector -=================== - -Required properties: -- compatible: "composite-video-connector" or "svideo-connector" - -Optional properties: -- label: a symbolic name for the connector -- sdtv-standards: limit the supported TV standards on a connector to the given - ones. If not specified all TV standards are allowed. - Possible TV standards are defined in - include/dt-bindings/display/sdtv-standards.h. - -Required nodes: -- Video port for TV input - -Example -------- -#include - -tv: connector { - compatible = "composite-video-connector"; - label = "tv"; - sdtv-standards = <(SDTV_STD_PAL | SDTV_STD_NTSC)>; - - port { - tv_connector_in: endpoint { - remote-endpoint = <&venc_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml new file mode 100644 index 000000000000..eebe88fed999 --- /dev/null +++ b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/connector/analog-tv-connector.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog TV Connector + +maintainers: + - Laurent Pinchart + +properties: + compatible: + enum: + - composite-video-connector + - svideo-connector + + label: true + + sdtv-standards: + description: + Limit the supported TV standards on a connector to the given ones. If + not specified all TV standards are allowed. Possible TV standards are + defined in include/dt-bindings/display/sdtv-standards.h. + $ref: /schemas/types.yaml#/definitions/uint32 + + port: + description: Connection to controller providing analog TV signals + +required: + - compatible + - port + +additionalProperties: false + +examples: + - | + #include + + connector { + compatible = "composite-video-connector"; + label = "tv"; + sdtv-standards = <(SDTV_STD_PAL | SDTV_STD_NTSC)>; + + port { + tv_connector_in: endpoint { + remote-endpoint = <&venc_out>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/connector/dvi-connector.txt b/Documentation/devicetree/bindings/display/connector/dvi-connector.txt deleted file mode 100644 index 207e42e9eba0..000000000000 --- a/Documentation/devicetree/bindings/display/connector/dvi-connector.txt +++ /dev/null @@ -1,36 +0,0 @@ -DVI Connector -============== - -Required properties: -- compatible: "dvi-connector" - -Optional properties: -- label: a symbolic name for the connector -- ddc-i2c-bus: phandle to the i2c bus that is connected to DVI DDC -- analog: the connector has DVI analog pins -- digital: the connector has DVI digital pins -- dual-link: the connector has pins for DVI dual-link -- hpd-gpios: HPD GPIO number - -Required nodes: -- Video port for DVI input - -Note: One (or both) of 'analog' or 'digital' must be set. - -Example -------- - -dvi0: connector@0 { - compatible = "dvi-connector"; - label = "dvi"; - - digital; - - ddc-i2c-bus = <&i2c3>; - - port { - dvi_connector_in: endpoint { - remote-endpoint = <&tfp410_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml b/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml new file mode 100644 index 000000000000..71cb9220fa59 --- /dev/null +++ b/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/connector/dvi-connector.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DVI Connector + +maintainers: + - Laurent Pinchart + +properties: + compatible: + const: dvi-connector + + label: true + + hpd-gpios: + description: A GPIO line connected to HPD + maxItems: 1 + + ddc-i2c-bus: + description: phandle link to the I2C controller used for DDC EDID probing + $ref: /schemas/types.yaml#/definitions/phandle + + analog: + type: boolean + description: the connector has DVI analog pins + + digital: + type: boolean + description: the connector has DVI digital pins + + dual-link: + type: boolean + description: the connector has pins for DVI dual-link + + port: + description: Connection to controller providing DVI signals + +required: + - compatible + - port + +anyOf: + - required: + - analog + - required: + - digital + +additionalProperties: false + +examples: + - | + connector { + compatible = "dvi-connector"; + label = "dvi"; + + digital; + + ddc-i2c-bus = <&i2c3>; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt b/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt deleted file mode 100644 index aeb07c4bd703..000000000000 --- a/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt +++ /dev/null @@ -1,31 +0,0 @@ -HDMI Connector -============== - -Required properties: -- compatible: "hdmi-connector" -- type: the HDMI connector type: "a", "b", "c", "d" or "e" - -Optional properties: -- label: a symbolic name for the connector -- hpd-gpios: HPD GPIO number -- ddc-i2c-bus: phandle link to the I2C controller used for DDC EDID probing -- ddc-en-gpios: signal to enable DDC bus - -Required nodes: -- Video port for HDMI input - -Example -------- - -hdmi0: connector@1 { - compatible = "hdmi-connector"; - label = "hdmi"; - - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&tpd12s015_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml new file mode 100644 index 000000000000..14d7128af592 --- /dev/null +++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/connector/hdmi-connector.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HDMI Connector + +maintainers: + - Laurent Pinchart + +properties: + compatible: + const: hdmi-connector + + type: + description: The HDMI connector type + enum: + - a # Standard full size + - b # Never deployed? + - c # Mini + - d # Micro + - e # automotive + + label: true + + hpd-gpios: + description: A GPIO line connected to HPD + maxItems: 1 + + ddc-i2c-bus: + description: phandle link to the I2C controller used for DDC EDID probing + $ref: /schemas/types.yaml#/definitions/phandle + + ddc-en-gpios: + description: GPIO signal to enable DDC bus + maxItems: 1 + + port: + description: Connection to controller providing HDMI signals + +required: + - compatible + - port + - type + +additionalProperties: false + +examples: + - | + connector { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/connector/vga-connector.txt b/Documentation/devicetree/bindings/display/connector/vga-connector.txt deleted file mode 100644 index c727f298e7ad..000000000000 --- a/Documentation/devicetree/bindings/display/connector/vga-connector.txt +++ /dev/null @@ -1,36 +0,0 @@ -VGA Connector -============= - -Required properties: - -- compatible: "vga-connector" - -Optional properties: - -- label: a symbolic name for the connector corresponding to a hardware label -- ddc-i2c-bus: phandle to the I2C bus that is connected to VGA DDC - -Required nodes: - -The VGA connector internal connections are modeled using the OF graph bindings -specified in Documentation/devicetree/bindings/graph.txt. - -The VGA connector has a single port that must be connected to a video source -port. - - -Example -------- - -vga0: connector@0 { - compatible = "vga-connector"; - label = "vga"; - - ddc-i2c-bus = <&i2c3>; - - port { - vga_connector_in: endpoint { - remote-endpoint = <&adv7123_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/connector/vga-connector.yaml b/Documentation/devicetree/bindings/display/connector/vga-connector.yaml new file mode 100644 index 000000000000..5782c4bb3252 --- /dev/null +++ b/Documentation/devicetree/bindings/display/connector/vga-connector.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/connector/vga-connector.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: VGA Connector + +maintainers: + - Laurent Pinchart + +properties: + compatible: + const: vga-connector + + label: true + + ddc-i2c-bus: + description: phandle link to the I2C controller used for DDC EDID probing + $ref: /schemas/types.yaml#/definitions/phandle + + port: + description: Connection to controller providing VGA signals + +required: + - compatible + - port + +additionalProperties: false + +examples: + - | + connector { + compatible = "vga-connector"; + label = "vga"; + + ddc-i2c-bus = <&i2c3>; + + port { + vga_connector_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + +... -- cgit v1.2.3 From d70cf7e0fc7648498583ccfcd54e70d2b7532549 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 4 Jul 2020 12:28:04 +0200 Subject: dt-bindings: display: convert innolux,p079zca to DT Schema As the binding matches panel-simple-dsi, added the compatible to the panel-simple-dsi list. With this change enable-gpios is now optional. v2: - It is a DSI panel, add it to panel-simple-dsi (Rob) Signed-off-by: Sam Ravnborg Reviewed-by: Rob Herring Cc: Rob Herring Cc: Chris Zhong Cc: Thierry Reding Cc: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200704102806.735713-2-sam@ravnborg.org --- .../bindings/display/panel/innolux,p079zca.txt | 22 ---------------------- .../bindings/display/panel/panel-simple-dsi.yaml | 2 ++ 2 files changed, 2 insertions(+), 22 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt deleted file mode 100644 index 3ab8c7412cf6..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt +++ /dev/null @@ -1,22 +0,0 @@ -Innolux P079ZCA 7.85" 768x1024 TFT LCD panel - -Required properties: -- compatible: should be "innolux,p079zca" -- reg: DSI virtual channel of the peripheral -- power-supply: phandle of the regulator that provides the supply voltage -- enable-gpios: panel enable gpio - -Optional properties: -- backlight: phandle of the backlight device attached to the panel - -Example: - - &mipi_dsi { - panel@0 { - compatible = "innolux,p079zca"; - reg = <0>; - power-supply = <...>; - backlight = <&backlight>; - enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml index 16778ce782fc..c0dd9fa29f1d 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -33,6 +33,8 @@ properties: - auo,b080uan01 # Boe Corporation 8.0" WUXGA TFT LCD panel - boe,tv080wum-nl0 + # Innolux P079ZCA 7.85" 768x1024 TFT LCD panel + - innolux,p079zca # Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel - kingdisplay,kd097d04 # LG ACX467AKM-7 4.95" 1080×1920 LCD Panel -- cgit v1.2.3 From c3823f2a4e0703a40ae2a16f06b57282ea79673c Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 4 Jul 2020 12:28:05 +0200 Subject: dt-bindings: display: convert samsung,s6e8aa0 to DT Schema v2: - Add missing types (Rob) - Fix example to specify panel@0 (Rob) Signed-off-by: Sam Ravnborg Reviewed-by: Rob Herring Cc: Rob Herring Cc: Andrzej Hajda Cc: Thierry Reding Cc: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200704102806.735713-3-sam@ravnborg.org --- .../bindings/display/panel/samsung,s6e8aa0.txt | 56 ------------ .../bindings/display/panel/samsung,s6e8aa0.yaml | 100 +++++++++++++++++++++ 2 files changed, 100 insertions(+), 56 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt deleted file mode 100644 index 9e766c5f86da..000000000000 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt +++ /dev/null @@ -1,56 +0,0 @@ -Samsung S6E8AA0 AMOLED LCD 5.3 inch panel - -Required properties: - - compatible: "samsung,s6e8aa0" - - reg: the virtual channel number of a DSI peripheral - - vdd3-supply: core voltage supply - - vci-supply: voltage supply for analog circuits - - reset-gpios: a GPIO spec for the reset pin - - display-timings: timings for the connected panel as described by [1] - -Optional properties: - - power-on-delay: delay after turning regulators on [ms] - - reset-delay: delay after reset sequence [ms] - - init-delay: delay after initialization sequence [ms] - - panel-width-mm: physical panel width [mm] - - panel-height-mm: physical panel height [mm] - - flip-horizontal: boolean to flip image horizontally - - flip-vertical: boolean to flip image vertically - -The device node can contain one 'port' child node with one child -'endpoint' node, according to the bindings defined in [2]. This -node should describe panel's video bus. - -[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt -[2]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - - panel { - compatible = "samsung,s6e8aa0"; - reg = <0>; - vdd3-supply = <&vcclcd_reg>; - vci-supply = <&vlcd_reg>; - reset-gpios = <&gpy4 5 0>; - power-on-delay= <50>; - reset-delay = <100>; - init-delay = <100>; - panel-width-mm = <58>; - panel-height-mm = <103>; - flip-horizontal; - flip-vertical; - - display-timings { - timing0: timing-0 { - clock-frequency = <57153600>; - hactive = <720>; - vactive = <1280>; - hfront-porch = <5>; - hback-porch = <5>; - hsync-len = <5>; - vfront-porch = <13>; - vback-porch = <1>; - vsync-len = <2>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml new file mode 100644 index 000000000000..ca959451557e --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6e8aa0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6E8AA0 AMOLED LCD 5.3 inch panel + +maintainers: + - Andrzej Hajda + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: samsung,s6e8aa0 + + reg: true + reset-gpios: true + display-timings: true + + vdd3-supply: + description: core voltage supply + + vci-supply: + description: voltage supply for analog circuits + + power-on-delay: + description: delay after turning regulators on [ms] + $ref: /schemas/types.yaml#/definitions/uint32 + + reset-delay: + description: delay after reset sequence [ms] + $ref: /schemas/types.yaml#/definitions/uint32 + + init-delay: + description: delay after initialization sequence [ms] + + panel-width-mm: + description: physical panel width [mm] + + panel-height-mm: + description: physical panel height [mm] + + flip-horizontal: + description: boolean to flip image horizontally + type: boolean + + flip-vertical: + description: boolean to flip image vertically + type: boolean + +required: + - compatible + - reg + - vdd3-supply + - vci-supply + - reset-gpios + - display-timings + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6e8aa0"; + reg = <0>; + vdd3-supply = <&vcclcd_reg>; + vci-supply = <&vlcd_reg>; + reset-gpios = <&gpy4 5 0>; + power-on-delay= <50>; + reset-delay = <100>; + init-delay = <100>; + panel-width-mm = <58>; + panel-height-mm = <103>; + flip-horizontal; + flip-vertical; + + display-timings { + timing0: timing-0 { + clock-frequency = <57153600>; + hactive = <720>; + vactive = <1280>; + hfront-porch = <5>; + hback-porch = <5>; + hsync-len = <5>; + vfront-porch = <13>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + }; + }; + +... -- cgit v1.2.3 From bb3431747a6a4e889e0836eaf35c9f234fda54ad Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 4 Jul 2020 12:28:06 +0200 Subject: dt-bindings: display: convert sharp,lq101r1sx01 to DT Schema This binding describes a panel with a secondary channel. v3: - Add reg property and unit-address to dsi nodes (Rob) v2: - add check for required properties if link2 is present (Rob) Signed-off-by: Sam Ravnborg Reviewed-by: Rob Herring Cc: Rob Herring Cc: Thierry Reding Cc: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200704102806.735713-4-sam@ravnborg.org --- .../bindings/display/panel/sharp,lq101r1sx01.txt | 49 ------------ .../bindings/display/panel/sharp,lq101r1sx01.yaml | 87 ++++++++++++++++++++++ 2 files changed, 87 insertions(+), 49 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.txt create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.txt deleted file mode 100644 index f522bb8e47e1..000000000000 --- a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.txt +++ /dev/null @@ -1,49 +0,0 @@ -Sharp Microelectronics 10.1" WQXGA TFT LCD panel - -This panel requires a dual-channel DSI host to operate. It supports two modes: -- left-right: each channel drives the left or right half of the screen -- even-odd: each channel drives the even or odd lines of the screen - -Each of the DSI channels controls a separate DSI peripheral. The peripheral -driven by the first link (DSI-LINK1), left or even, is considered the primary -peripheral and controls the device. The 'link2' property contains a phandle -to the peripheral driven by the second link (DSI-LINK2, right or odd). - -Note that in video mode the DSI-LINK1 interface always provides the left/even -pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it -is possible to program either link to drive the left/even or right/odd pixels -but for the sake of consistency this binding assumes that the same assignment -is chosen as for video mode. - -Required properties: -- compatible: should be "sharp,lq101r1sx01" -- reg: DSI virtual channel of the peripheral - -Required properties (for DSI-LINK1 only): -- link2: phandle to the DSI peripheral on the secondary link. Note that the - presence of this property marks the containing node as DSI-LINK1. -- power-supply: phandle of the regulator that provides the supply voltage - -Optional properties (for DSI-LINK1 only): -- backlight: phandle of the backlight device attached to the panel - -Example: - - dsi@54300000 { - panel: panel@0 { - compatible = "sharp,lq101r1sx01"; - reg = <0>; - - link2 = <&secondary>; - - power-supply = <...>; - backlight = <...>; - }; - }; - - dsi@54400000 { - secondary: panel@0 { - compatible = "sharp,lq101r1sx01"; - reg = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml new file mode 100644 index 000000000000..a679d3647dbd --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sharp,lq101r1sx01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp Microelectronics 10.1" WQXGA TFT LCD panel + +maintainers: + - Thierry Reding + +description: | + This panel requires a dual-channel DSI host to operate. It supports two modes: + - left-right: each channel drives the left or right half of the screen + - even-odd: each channel drives the even or odd lines of the screen + + Each of the DSI channels controls a separate DSI peripheral. The peripheral + driven by the first link (DSI-LINK1), left or even, is considered the primary + peripheral and controls the device. The 'link2' property contains a phandle + to the peripheral driven by the second link (DSI-LINK2, right or odd). + + Note that in video mode the DSI-LINK1 interface always provides the left/even + pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it + is possible to program either link to drive the left/even or right/odd pixels + but for the sake of consistency this binding assumes that the same assignment + is chosen as for video mode. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sharp,lq101r1sx01 + + reg: true + power-supply: true + backlight: true + + link2: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + phandle to the DSI peripheral on the secondary link. Note that the + presence of this property marks the containing node as DSI-LINK1 + +required: + - compatible + - reg + +if: + required: + - link2 +then: + required: + - power-supply + +additionalProperties: false + +examples: + - | + dsi0: dsi@fd922800 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfd922800 0x200>; + + panel: panel@0 { + compatible = "sharp,lq101r1sx01"; + reg = <0>; + + link2 = <&secondary>; + + power-supply = <&power>; + backlight = <&backlight>; + }; + }; + + dsi1: dsi@fd922a00 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfd922a00 0x200>; + + secondary: panel@0 { + compatible = "sharp,lq101r1sx01"; + reg = <0>; + }; + }; + +... -- cgit v1.2.3 From 672c6b1fe621af0e53fbb11e6feda61d336d78e1 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 4 Jul 2020 16:35:44 +0200 Subject: dt-bindings: fix simple-framebuffer example Now that dt-extract-example gained support for using root nodes in examples, update the example for the simple-frambuffer binding to use it. This gives us a better example and kill a long standing warning: simple-framebuffer.example.dts:23.16-39.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node Note: To get the update dt-extract-example execute: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade v2: - fix spelling of framebuffer (Geert) - drop stdout-path (Rob) Signed-off-by: Sam Ravnborg Reviewed-by: Rob Herring Cc: Geert Uytterhoeven Cc: Hans de Goede Cc: David Airlie Cc: Daniel Vetter Cc: Bartlomiej Zolnierkiewicz Cc: linux-fbdev@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200704143544.789345-2-sam@ravnborg.org --- .../bindings/display/simple-framebuffer.yaml | 44 +++++++++++----------- 1 file changed, 22 insertions(+), 22 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml index 1db608c9eef5..eaf8c54fcf50 100644 --- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml +++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml @@ -152,28 +152,28 @@ additionalProperties: false examples: - | - aliases { - display0 = &lcdc0; + / { + compatible = "foo"; + model = "foo"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + framebuffer0: framebuffer@1d385000 { + compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + reg = <0x1d385000 3840000>; + width = <1600>; + height = <1200>; + stride = <3200>; + format = "r5g6b5"; + clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; + lcd-supply = <®_dc1sw>; + display = <&lcdc0>; + }; + }; }; - chosen { - #address-cells = <1>; - #size-cells = <1>; - stdout-path = "display0"; - framebuffer0: framebuffer@1d385000 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0"; - reg = <0x1d385000 3840000>; - width = <1600>; - height = <1200>; - stride = <3200>; - format = "r5g6b5"; - clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; - lcd-supply = <®_dc1sw>; - display = <&lcdc0>; - }; - }; - - lcdc0: lcdc { }; - ... -- cgit v1.2.3 From 3ab0ea4a1aa752ef2f299db10c1902bf320afca6 Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Thu, 16 Jul 2020 14:57:30 +0200 Subject: dt-bindings: display: panel-dsi-cm: convert to YAML Convert panel-dsi-cm bindings to YAML and add missing properties while at it. Reviewed-by: Laurent Pinchart Reviewed-by: Rob Herring Signed-off-by: Sebastian Reichel Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200716125733.83654-2-sebastian.reichel@collabora.com --- .../bindings/display/panel/panel-dsi-cm.txt | 29 -------- .../bindings/display/panel/panel-dsi-cm.yaml | 86 ++++++++++++++++++++++ 2 files changed, 86 insertions(+), 29 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt create mode 100644 Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt deleted file mode 100644 index dce48eb9db57..000000000000 --- a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt +++ /dev/null @@ -1,29 +0,0 @@ -Generic MIPI DSI Command Mode Panel -=================================== - -Required properties: -- compatible: "panel-dsi-cm" - -Optional properties: -- label: a symbolic name for the panel -- reset-gpios: panel reset gpio -- te-gpios: panel TE gpio - -Required nodes: -- Video port for DSI input - -Example -------- - -lcd0: display { - compatible = "tpo,taal", "panel-dsi-cm"; - label = "lcd0"; - - reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; - - port { - lcd0_in: endpoint { - remote-endpoint = <&dsi1_out_ep>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml new file mode 100644 index 000000000000..d766c949c622 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-dsi-cm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DSI command mode panels + +maintainers: + - Tomi Valkeinen + - Sebastian Reichel + +description: | + This binding file is a collection of the DSI panels that + are usually driven in command mode. If no backlight is + referenced via the optional backlight property, the DSI + panel is assumed to have native backlight support. + The panel may use an OF graph binding for the association + to the display, or it may be a direct child node of the + display. + +allOf: + - $ref: panel-common.yaml# + +properties: + + compatible: + items: + - enum: + - motorola,droid4-panel # Panel from Motorola Droid4 phone + - nokia,himalaya # Panel from Nokia N950 phone + - tpo,taal # Panel from OMAP4 SDP board + - const: panel-dsi-cm # Generic DSI command mode panel compatible fallback + + reg: + maxItems: 1 + description: DSI virtual channel + + vddi-supply: + description: + Display panels require power to be supplied. While several panels need + more than one power supply with panel-specific constraints governing the + order and timings of the power supplies, in many cases a single power + supply is sufficient, either because the panel has a single power rail, or + because all its power rails can be driven by the same supply. In that case + the vddi-supply property specifies the supply powering the panel as a + phandle to a regulator. + + vpnl-supply: + description: + When the display panel needs a second power supply, this property can be + used in addition to vddi-supply. Both supplies will be enabled at the + same time before the panel is being accessed. + + width-mm: true + height-mm: true + label: true + rotation: true + panel-timing: true + port: true + reset-gpios: true + te-gpios: true + backlight: true + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include + + dsi-controller { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "tpo,taal", "panel-dsi-cm"; + reg = <0>; + reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; + }; + }; + +... -- cgit v1.2.3 From 5e6c2b4f916157e8f10d093d43e88b2a250d1774 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Fri, 17 Apr 2020 15:33:13 -0400 Subject: drm/vblank: Add vblank works Add some kind of vblank workers. The interface is similar to regular delayed works, and is mostly based off kthread_work. It allows for scheduling delayed works that execute once a particular vblank sequence has passed. It also allows for accurate flushing of scheduled vblank works - in that flushing waits for both the vblank sequence and job execution to complete, or for the work to get cancelled - whichever comes first. Whatever hardware programming we do in the work must be fast (must at least complete during the vblank or scanout period, sometimes during the first few scanlines of the vblank). As such we use a high-priority per-CRTC thread to accomplish this. Changes since v7: * Stuff drm_vblank_internal.h and drm_vblank_work_internal.h contents into drm_internal.h * Get rid of unnecessary spinlock in drm_crtc_vblank_on() * Remove !vblank->worker check * Grab vbl_lock in drm_vblank_work_schedule() * Mention self-rearming work items in drm_vblank_work_schedule() kdocs * Return 1 from drm_vblank_work_schedule() if the work was scheduled successfully, 0 or error code otherwise * Use drm_dbg_core() instead of DRM_DEV_ERROR() in drm_vblank_work_schedule() * Remove vblank->worker checks in drm_vblank_destroy_worker() and drm_vblank_flush_worker() Changes since v6: * Get rid of ->pending and seqcounts, and implement flushing through simpler means - danvet * Get rid of work_lock, just use drm_device->event_lock * Move drm_vblank_work item cleanup into drm_crtc_vblank_off() so that we ensure that all vblank work has finished before disabling vblanks * Add checks into drm_crtc_vblank_reset() so we yell if it gets called while there's vblank workers active * Grab event_lock in both drm_crtc_vblank_on()/drm_crtc_vblank_off(), the main reason for this is so that other threads calling drm_vblank_work_schedule() are blocked from attempting to schedule while we're in the middle of enabling/disabling vblanks. * Move drm_handle_vblank_works() call below drm_handle_vblank_events() * Simplify drm_vblank_work_cancel_sync() * Fix drm_vblank_work_cancel_sync() documentation * Move wake_up_all() calls out of spinlock where we can. The only one I left was the call to wake_up_all() in drm_vblank_handle_works() as this seemed like it made more sense just living in that function (which is all technically under lock) * Move drm_vblank_work related functions into their own source files * Add drm_vblank_internal.h so we can export some functions we don't want drivers using, but that we do need to use in drm_vblank_work.c * Add a bunch of documentation Changes since v4: * Get rid of kthread interfaces we tried adding and move all of the locking into drm_vblank.c. For implementing drm_vblank_work_flush(), we now use a wait_queue and sequence counters in order to differentiate between multiple work item executions. * Get rid of drm_vblank_work_cancel() - this would have been pretty difficult to actually reimplement and it occurred to me that neither nouveau or i915 are even planning to use this function. Since there's also no async cancel function for most of the work interfaces in the kernel, it seems a bit unnecessary anyway. * Get rid of to_drm_vblank_work() since we now are also able to just pass the struct drm_vblank_work to work item callbacks anyway Changes since v3: * Use our own spinlocks, don't integrate so tightly with kthread_works Changes since v2: * Use kthread_workers instead of reinventing the wheel. Cc: Tejun Heo Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Reviewed-by: Daniel Vetter Co-developed-by: Ville Syrjälä Signed-off-by: Lyude Paul Acked-by: Dave Airlie Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-4-lyude@redhat.com --- Documentation/gpu/drm-kms.rst | 15 +++ drivers/gpu/drm/Makefile | 2 +- drivers/gpu/drm/drm_internal.h | 27 ++++ drivers/gpu/drm/drm_vblank.c | 44 ++++--- drivers/gpu/drm/drm_vblank_work.c | 267 ++++++++++++++++++++++++++++++++++++++ include/drm/drm_vblank.h | 20 +++ include/drm/drm_vblank_work.h | 71 ++++++++++ 7 files changed, 430 insertions(+), 16 deletions(-) create mode 100644 drivers/gpu/drm/drm_vblank_work.c create mode 100644 include/drm/drm_vblank_work.h (limited to 'Documentation') diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index 975cfeb8a353..3c5ae4f6dfd2 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -543,3 +543,18 @@ Vertical Blanking and Interrupt Handling Functions Reference .. kernel-doc:: drivers/gpu/drm/drm_vblank.c :export: + +Vertical Blank Work +=================== + +.. kernel-doc:: drivers/gpu/drm/drm_vblank_work.c + :doc: vblank works + +Vertical Blank Work Functions Reference +--------------------------------------- + +.. kernel-doc:: include/drm/drm_vblank_work.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_vblank_work.c + :export: diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 2c0e5a7e5953..02ee5faf1a92 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -18,7 +18,7 @@ drm-y := drm_auth.o drm_cache.o \ drm_dumb_buffers.o drm_mode_config.o drm_vblank.o \ drm_syncobj.o drm_lease.o drm_writeback.o drm_client.o \ drm_client_modeset.o drm_atomic_uapi.o drm_hdcp.o \ - drm_managed.o + drm_managed.o drm_vblank_work.o drm-$(CONFIG_DRM_LEGACY) += drm_legacy_misc.o drm_bufs.o drm_context.o drm_dma.o drm_scatter.o drm_lock.o drm-$(CONFIG_DRM_LIB_RANDOM) += lib/drm_random.o diff --git a/drivers/gpu/drm/drm_internal.h b/drivers/gpu/drm/drm_internal.h index 2470a352730b..8e01caaf95cc 100644 --- a/drivers/gpu/drm/drm_internal.h +++ b/drivers/gpu/drm/drm_internal.h @@ -21,7 +21,10 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include + #include +#include #define DRM_IF_MAJOR 1 #define DRM_IF_MINOR 4 @@ -38,6 +41,7 @@ struct drm_master; struct drm_minor; struct drm_prime_file_private; struct drm_printer; +struct drm_vblank_crtc; /* drm_file.c */ extern struct mutex drm_global_mutex; @@ -93,7 +97,30 @@ void drm_minor_release(struct drm_minor *minor); void drm_managed_release(struct drm_device *dev); /* drm_vblank.c */ +static inline bool drm_vblank_passed(u64 seq, u64 ref) +{ + return (seq - ref) <= (1 << 23); +} + void drm_vblank_disable_and_save(struct drm_device *dev, unsigned int pipe); +int drm_vblank_get(struct drm_device *dev, unsigned int pipe); +void drm_vblank_put(struct drm_device *dev, unsigned int pipe); +u64 drm_vblank_count(struct drm_device *dev, unsigned int pipe); + +/* drm_vblank_work.c */ +static inline void drm_vblank_flush_worker(struct drm_vblank_crtc *vblank) +{ + kthread_flush_worker(vblank->worker); +} + +static inline void drm_vblank_destroy_worker(struct drm_vblank_crtc *vblank) +{ + kthread_destroy_worker(vblank->worker); +} + +int drm_vblank_worker_init(struct drm_vblank_crtc *vblank); +void drm_vblank_cancel_pending_works(struct drm_vblank_crtc *vblank); +void drm_handle_vblank_works(struct drm_vblank_crtc *vblank); /* IOCTLS */ int drm_wait_vblank_ioctl(struct drm_device *dev, void *data, diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c index e277e40e5b82..f402c75b9d34 100644 --- a/drivers/gpu/drm/drm_vblank.c +++ b/drivers/gpu/drm/drm_vblank.c @@ -25,6 +25,7 @@ */ #include +#include #include #include @@ -363,7 +364,7 @@ static void drm_update_vblank_count(struct drm_device *dev, unsigned int pipe, store_vblank(dev, pipe, diff, t_vblank, cur_vblank); } -static u64 drm_vblank_count(struct drm_device *dev, unsigned int pipe) +u64 drm_vblank_count(struct drm_device *dev, unsigned int pipe) { struct drm_vblank_crtc *vblank = &dev->vblank[pipe]; u64 count; @@ -497,6 +498,7 @@ static void drm_vblank_init_release(struct drm_device *dev, void *ptr) drm_WARN_ON(dev, READ_ONCE(vblank->enabled) && drm_core_check_feature(dev, DRIVER_MODESET)); + drm_vblank_destroy_worker(vblank); del_timer_sync(&vblank->disable_timer); } @@ -539,6 +541,10 @@ int drm_vblank_init(struct drm_device *dev, unsigned int num_crtcs) vblank); if (ret) return ret; + + ret = drm_vblank_worker_init(vblank); + if (ret) + return ret; } return 0; @@ -1135,7 +1141,7 @@ static int drm_vblank_enable(struct drm_device *dev, unsigned int pipe) return ret; } -static int drm_vblank_get(struct drm_device *dev, unsigned int pipe) +int drm_vblank_get(struct drm_device *dev, unsigned int pipe) { struct drm_vblank_crtc *vblank = &dev->vblank[pipe]; unsigned long irqflags; @@ -1178,7 +1184,7 @@ int drm_crtc_vblank_get(struct drm_crtc *crtc) } EXPORT_SYMBOL(drm_crtc_vblank_get); -static void drm_vblank_put(struct drm_device *dev, unsigned int pipe) +void drm_vblank_put(struct drm_device *dev, unsigned int pipe) { struct drm_vblank_crtc *vblank = &dev->vblank[pipe]; @@ -1281,13 +1287,16 @@ void drm_crtc_vblank_off(struct drm_crtc *crtc) unsigned int pipe = drm_crtc_index(crtc); struct drm_vblank_crtc *vblank = &dev->vblank[pipe]; struct drm_pending_vblank_event *e, *t; - ktime_t now; u64 seq; if (drm_WARN_ON(dev, pipe >= dev->num_crtcs)) return; + /* + * Grab event_lock early to prevent vblank work from being scheduled + * while we're in the middle of shutting down vblank interrupts + */ spin_lock_irq(&dev->event_lock); spin_lock(&dev->vbl_lock); @@ -1324,11 +1333,18 @@ void drm_crtc_vblank_off(struct drm_crtc *crtc) drm_vblank_put(dev, pipe); send_vblank_event(dev, e, seq, now); } + + /* Cancel any leftover pending vblank work */ + drm_vblank_cancel_pending_works(vblank); + spin_unlock_irq(&dev->event_lock); /* Will be reset by the modeset helpers when re-enabling the crtc by * calling drm_calc_timestamping_constants(). */ vblank->hwmode.crtc_clock = 0; + + /* Wait for any vblank work that's still executing to finish */ + drm_vblank_flush_worker(vblank); } EXPORT_SYMBOL(drm_crtc_vblank_off); @@ -1363,6 +1379,7 @@ void drm_crtc_vblank_reset(struct drm_crtc *crtc) spin_unlock_irqrestore(&dev->vbl_lock, irqflags); drm_WARN_ON(dev, !list_empty(&dev->vblank_event_list)); + drm_WARN_ON(dev, !list_empty(&vblank->pending_work)); } EXPORT_SYMBOL(drm_crtc_vblank_reset); @@ -1589,11 +1606,6 @@ int drm_legacy_modeset_ctl_ioctl(struct drm_device *dev, void *data, return 0; } -static inline bool vblank_passed(u64 seq, u64 ref) -{ - return (seq - ref) <= (1 << 23); -} - static int drm_queue_vblank_event(struct drm_device *dev, unsigned int pipe, u64 req_seq, union drm_wait_vblank *vblwait, @@ -1651,7 +1663,7 @@ static int drm_queue_vblank_event(struct drm_device *dev, unsigned int pipe, trace_drm_vblank_event_queued(file_priv, pipe, req_seq); e->sequence = req_seq; - if (vblank_passed(seq, req_seq)) { + if (drm_vblank_passed(seq, req_seq)) { drm_vblank_put(dev, pipe); send_vblank_event(dev, e, seq, now); vblwait->reply.sequence = seq; @@ -1806,7 +1818,7 @@ int drm_wait_vblank_ioctl(struct drm_device *dev, void *data, } if ((flags & _DRM_VBLANK_NEXTONMISS) && - vblank_passed(seq, req_seq)) { + drm_vblank_passed(seq, req_seq)) { req_seq = seq + 1; vblwait->request.type &= ~_DRM_VBLANK_NEXTONMISS; vblwait->request.sequence = req_seq; @@ -1825,7 +1837,7 @@ int drm_wait_vblank_ioctl(struct drm_device *dev, void *data, drm_dbg_core(dev, "waiting on vblank count %llu, crtc %u\n", req_seq, pipe); wait = wait_event_interruptible_timeout(vblank->queue, - vblank_passed(drm_vblank_count(dev, pipe), req_seq) || + drm_vblank_passed(drm_vblank_count(dev, pipe), req_seq) || !READ_ONCE(vblank->enabled), msecs_to_jiffies(3000)); @@ -1874,7 +1886,7 @@ static void drm_handle_vblank_events(struct drm_device *dev, unsigned int pipe) list_for_each_entry_safe(e, t, &dev->vblank_event_list, base.link) { if (e->pipe != pipe) continue; - if (!vblank_passed(seq, e->sequence)) + if (!drm_vblank_passed(seq, e->sequence)) continue; drm_dbg_core(dev, "vblank event on %llu, current %llu\n", @@ -1944,6 +1956,7 @@ bool drm_handle_vblank(struct drm_device *dev, unsigned int pipe) !atomic_read(&vblank->refcount)); drm_handle_vblank_events(dev, pipe); + drm_handle_vblank_works(vblank); spin_unlock_irqrestore(&dev->event_lock, irqflags); @@ -2097,7 +2110,7 @@ int drm_crtc_queue_sequence_ioctl(struct drm_device *dev, void *data, if (flags & DRM_CRTC_SEQUENCE_RELATIVE) req_seq += seq; - if ((flags & DRM_CRTC_SEQUENCE_NEXT_ON_MISS) && vblank_passed(seq, req_seq)) + if ((flags & DRM_CRTC_SEQUENCE_NEXT_ON_MISS) && drm_vblank_passed(seq, req_seq)) req_seq = seq + 1; e->pipe = pipe; @@ -2126,7 +2139,7 @@ int drm_crtc_queue_sequence_ioctl(struct drm_device *dev, void *data, e->sequence = req_seq; - if (vblank_passed(seq, req_seq)) { + if (drm_vblank_passed(seq, req_seq)) { drm_crtc_vblank_put(crtc); send_vblank_event(dev, e, seq, now); queue_seq->sequence = seq; @@ -2146,3 +2159,4 @@ err_free: kfree(e); return ret; } + diff --git a/drivers/gpu/drm/drm_vblank_work.c b/drivers/gpu/drm/drm_vblank_work.c new file mode 100644 index 000000000000..7ac0fc0a9415 --- /dev/null +++ b/drivers/gpu/drm/drm_vblank_work.c @@ -0,0 +1,267 @@ +// SPDX-License-Identifier: MIT + +#include + +#include +#include +#include +#include + +#include "drm_internal.h" + +/** + * DOC: vblank works + * + * Many DRM drivers need to program hardware in a time-sensitive manner, many + * times with a deadline of starting and finishing within a certain region of + * the scanout. Most of the time the safest way to accomplish this is to + * simply do said time-sensitive programming in the driver's IRQ handler, + * which allows drivers to avoid being preempted during these critical + * regions. Or even better, the hardware may even handle applying such + * time-critical programming independently of the CPU. + * + * While there's a decent amount of hardware that's designed so that the CPU + * doesn't need to be concerned with extremely time-sensitive programming, + * there's a few situations where it can't be helped. Some unforgiving + * hardware may require that certain time-sensitive programming be handled + * completely by the CPU, and said programming may even take too long to + * handle in an IRQ handler. Another such situation would be where the driver + * needs to perform a task that needs to complete within a specific scanout + * period, but might possibly block and thus cannot be handled in an IRQ + * context. Both of these situations can't be solved perfectly in Linux since + * we're not a realtime kernel, and thus the scheduler may cause us to miss + * our deadline if it decides to preempt us. But for some drivers, it's good + * enough if we can lower our chance of being preempted to an absolute + * minimum. + * + * This is where &drm_vblank_work comes in. &drm_vblank_work provides a simple + * generic delayed work implementation which delays work execution until a + * particular vblank has passed, and then executes the work at realtime + * priority. This provides the best possible chance at performing + * time-sensitive hardware programming on time, even when the system is under + * heavy load. &drm_vblank_work also supports rescheduling, so that self + * re-arming work items can be easily implemented. + */ + +void drm_handle_vblank_works(struct drm_vblank_crtc *vblank) +{ + struct drm_vblank_work *work, *next; + u64 count = atomic64_read(&vblank->count); + bool wake = false; + + assert_spin_locked(&vblank->dev->event_lock); + + list_for_each_entry_safe(work, next, &vblank->pending_work, node) { + if (!drm_vblank_passed(count, work->count)) + continue; + + list_del_init(&work->node); + drm_vblank_put(vblank->dev, vblank->pipe); + kthread_queue_work(vblank->worker, &work->base); + wake = true; + } + if (wake) + wake_up_all(&vblank->work_wait_queue); +} + +/* Handle cancelling any pending vblank work items and drop respective vblank + * references in response to vblank interrupts being disabled. + */ +void drm_vblank_cancel_pending_works(struct drm_vblank_crtc *vblank) +{ + struct drm_vblank_work *work, *next; + + assert_spin_locked(&vblank->dev->event_lock); + + list_for_each_entry_safe(work, next, &vblank->pending_work, node) { + list_del_init(&work->node); + drm_vblank_put(vblank->dev, vblank->pipe); + } + + wake_up_all(&vblank->work_wait_queue); +} + +/** + * drm_vblank_work_schedule - schedule a vblank work + * @work: vblank work to schedule + * @count: target vblank count + * @nextonmiss: defer until the next vblank if target vblank was missed + * + * Schedule @work for execution once the crtc vblank count reaches @count. + * + * If the crtc vblank count has already reached @count and @nextonmiss is + * %false the work starts to execute immediately. + * + * If the crtc vblank count has already reached @count and @nextonmiss is + * %true the work is deferred until the next vblank (as if @count has been + * specified as crtc vblank count + 1). + * + * If @work is already scheduled, this function will reschedule said work + * using the new @count. This can be used for self-rearming work items. + * + * Returns: + * %1 if @work was successfully (re)scheduled, %0 if it was either already + * scheduled or cancelled, or a negative error code on failure. + */ +int drm_vblank_work_schedule(struct drm_vblank_work *work, + u64 count, bool nextonmiss) +{ + struct drm_vblank_crtc *vblank = work->vblank; + struct drm_device *dev = vblank->dev; + u64 cur_vbl; + unsigned long irqflags; + bool passed, inmodeset, rescheduling = false, wake = false; + int ret = 0; + + spin_lock_irqsave(&dev->event_lock, irqflags); + if (work->cancelling) + goto out; + + spin_lock(&dev->vbl_lock); + inmodeset = vblank->inmodeset; + spin_unlock(&dev->vbl_lock); + if (inmodeset) + goto out; + + if (list_empty(&work->node)) { + ret = drm_vblank_get(dev, vblank->pipe); + if (ret < 0) + goto out; + } else if (work->count == count) { + /* Already scheduled w/ same vbl count */ + goto out; + } else { + rescheduling = true; + } + + work->count = count; + cur_vbl = drm_vblank_count(dev, vblank->pipe); + passed = drm_vblank_passed(cur_vbl, count); + if (passed) + drm_dbg_core(dev, + "crtc %d vblank %llu already passed (current %llu)\n", + vblank->pipe, count, cur_vbl); + + if (!nextonmiss && passed) { + drm_vblank_put(dev, vblank->pipe); + ret = kthread_queue_work(vblank->worker, &work->base); + + if (rescheduling) { + list_del_init(&work->node); + wake = true; + } + } else { + if (!rescheduling) + list_add_tail(&work->node, &vblank->pending_work); + ret = true; + } + +out: + spin_unlock_irqrestore(&dev->event_lock, irqflags); + if (wake) + wake_up_all(&vblank->work_wait_queue); + return ret; +} +EXPORT_SYMBOL(drm_vblank_work_schedule); + +/** + * drm_vblank_work_cancel_sync - cancel a vblank work and wait for it to + * finish executing + * @work: vblank work to cancel + * + * Cancel an already scheduled vblank work and wait for its + * execution to finish. + * + * On return, @work is guaranteed to no longer be scheduled or running, even + * if it's self-arming. + * + * Returns: + * %True if the work was cancelled before it started to execute, %false + * otherwise. + */ +bool drm_vblank_work_cancel_sync(struct drm_vblank_work *work) +{ + struct drm_vblank_crtc *vblank = work->vblank; + struct drm_device *dev = vblank->dev; + bool ret = false; + + spin_lock_irq(&dev->event_lock); + if (!list_empty(&work->node)) { + list_del_init(&work->node); + drm_vblank_put(vblank->dev, vblank->pipe); + ret = true; + } + + work->cancelling++; + spin_unlock_irq(&dev->event_lock); + + wake_up_all(&vblank->work_wait_queue); + + if (kthread_cancel_work_sync(&work->base)) + ret = true; + + spin_lock_irq(&dev->event_lock); + work->cancelling--; + spin_unlock_irq(&dev->event_lock); + + return ret; +} +EXPORT_SYMBOL(drm_vblank_work_cancel_sync); + +/** + * drm_vblank_work_flush - wait for a scheduled vblank work to finish + * executing + * @work: vblank work to flush + * + * Wait until @work has finished executing once. + */ +void drm_vblank_work_flush(struct drm_vblank_work *work) +{ + struct drm_vblank_crtc *vblank = work->vblank; + struct drm_device *dev = vblank->dev; + + spin_lock_irq(&dev->event_lock); + wait_event_lock_irq(vblank->work_wait_queue, list_empty(&work->node), + dev->event_lock); + spin_unlock_irq(&dev->event_lock); + + kthread_flush_work(&work->base); +} +EXPORT_SYMBOL(drm_vblank_work_flush); + +/** + * drm_vblank_work_init - initialize a vblank work item + * @work: vblank work item + * @crtc: CRTC whose vblank will trigger the work execution + * @func: work function to be executed + * + * Initialize a vblank work item for a specific crtc. + */ +void drm_vblank_work_init(struct drm_vblank_work *work, struct drm_crtc *crtc, + void (*func)(struct kthread_work *work)) +{ + kthread_init_work(&work->base, func); + INIT_LIST_HEAD(&work->node); + work->vblank = &crtc->dev->vblank[drm_crtc_index(crtc)]; +} +EXPORT_SYMBOL(drm_vblank_work_init); + +int drm_vblank_worker_init(struct drm_vblank_crtc *vblank) +{ + struct sched_param param = { + .sched_priority = MAX_RT_PRIO - 1, + }; + struct kthread_worker *worker; + + INIT_LIST_HEAD(&vblank->pending_work); + init_waitqueue_head(&vblank->work_wait_queue); + worker = kthread_create_worker(0, "card%d-crtc%d", + vblank->dev->primary->index, + vblank->pipe); + if (IS_ERR(worker)) + return PTR_ERR(worker); + + vblank->worker = worker; + + return sched_setscheduler(vblank->worker->task, SCHED_FIFO, ¶m); +} diff --git a/include/drm/drm_vblank.h b/include/drm/drm_vblank.h index dd9f5b9e56e4..dd125f8c766c 100644 --- a/include/drm/drm_vblank.h +++ b/include/drm/drm_vblank.h @@ -27,12 +27,14 @@ #include #include #include +#include #include #include struct drm_device; struct drm_crtc; +struct drm_vblank_work; /** * struct drm_pending_vblank_event - pending vblank event tracking @@ -203,6 +205,24 @@ struct drm_vblank_crtc { * disabling functions multiple times. */ bool enabled; + + /** + * @worker: The &kthread_worker used for executing vblank works. + */ + struct kthread_worker *worker; + + /** + * @pending_work: A list of scheduled &drm_vblank_work items that are + * waiting for a future vblank. + */ + struct list_head pending_work; + + /** + * @work_wait_queue: The wait queue used for signaling that a + * &drm_vblank_work item has either finished executing, or was + * cancelled. + */ + wait_queue_head_t work_wait_queue; }; int drm_vblank_init(struct drm_device *dev, unsigned int num_crtcs); diff --git a/include/drm/drm_vblank_work.h b/include/drm/drm_vblank_work.h new file mode 100644 index 000000000000..eb41d0810c4f --- /dev/null +++ b/include/drm/drm_vblank_work.h @@ -0,0 +1,71 @@ +/* SPDX-License-Identifier: MIT */ + +#ifndef _DRM_VBLANK_WORK_H_ +#define _DRM_VBLANK_WORK_H_ + +#include + +struct drm_crtc; + +/** + * struct drm_vblank_work - A delayed work item which delays until a target + * vblank passes, and then executes at realtime priority outside of IRQ + * context. + * + * See also: + * drm_vblank_work_schedule() + * drm_vblank_work_init() + * drm_vblank_work_cancel_sync() + * drm_vblank_work_flush() + */ +struct drm_vblank_work { + /** + * @base: The base &kthread_work item which will be executed by + * &drm_vblank_crtc.worker. Drivers should not interact with this + * directly, and instead rely on drm_vblank_work_init() to initialize + * this. + */ + struct kthread_work base; + + /** + * @vblank: A pointer to &drm_vblank_crtc this work item belongs to. + */ + struct drm_vblank_crtc *vblank; + + /** + * @count: The target vblank this work will execute on. Drivers should + * not modify this value directly, and instead use + * drm_vblank_work_schedule() + */ + u64 count; + + /** + * @cancelling: The number of drm_vblank_work_cancel_sync() calls that + * are currently running. A work item cannot be rescheduled until all + * calls have finished. + */ + int cancelling; + + /** + * @node: The position of this work item in + * &drm_vblank_crtc.pending_work. + */ + struct list_head node; +}; + +/** + * to_drm_vblank_work - Retrieve the respective &drm_vblank_work item from a + * &kthread_work + * @_work: The &kthread_work embedded inside a &drm_vblank_work + */ +#define to_drm_vblank_work(_work) \ + container_of((_work), struct drm_vblank_work, base) + +int drm_vblank_work_schedule(struct drm_vblank_work *work, + u64 count, bool nextonmiss); +void drm_vblank_work_init(struct drm_vblank_work *work, struct drm_crtc *crtc, + void (*func)(struct kthread_work *work)); +bool drm_vblank_work_cancel_sync(struct drm_vblank_work *work); +void drm_vblank_work_flush(struct drm_vblank_work *work); + +#endif /* !_DRM_VBLANK_WORK_H_ */ -- cgit v1.2.3 From c9390228245c06e7866896d6c1bd09601b8f8f4b Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Thu, 16 Jul 2020 18:38:36 +0200 Subject: dt-bindings: display: Convert ingenic,lcd.txt to YAML Convert the ingenic,lcd.txt to a new ingenic,lcd.yaml file. In the process, the new ingenic,jz4780-lcd compatible string has been added. v2: Add info about IPU at port@8 v3: No change Signed-off-by: Paul Cercueil Reviewed-by: Rob Herring Reviewed-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-2-paul@crapouillou.net --- .../devicetree/bindings/display/ingenic,lcd.txt | 45 -------- .../devicetree/bindings/display/ingenic,lcd.yaml | 126 +++++++++++++++++++++ 2 files changed, 126 insertions(+), 45 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/ingenic,lcd.txt create mode 100644 Documentation/devicetree/bindings/display/ingenic,lcd.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.txt b/Documentation/devicetree/bindings/display/ingenic,lcd.txt deleted file mode 100644 index 01e3261defb6..000000000000 --- a/Documentation/devicetree/bindings/display/ingenic,lcd.txt +++ /dev/null @@ -1,45 +0,0 @@ -Ingenic JZ47xx LCD driver - -Required properties: -- compatible: one of: - * ingenic,jz4740-lcd - * ingenic,jz4725b-lcd - * ingenic,jz4770-lcd -- reg: LCD registers location and length -- clocks: LCD pixclock and device clock specifiers. - The device clock is only required on the JZ4740. -- clock-names: "lcd_pclk" and "lcd" -- interrupts: Specifies the interrupt line the LCD controller is connected to. - -Example: - -panel { - compatible = "sharp,ls020b1dd01d"; - - backlight = <&backlight>; - power-supply = <&vcc>; - - port { - panel_input: endpoint { - remote-endpoint = <&panel_output>; - }; - }; -}; - - -lcd: lcd-controller@13050000 { - compatible = "ingenic,jz4725b-lcd"; - reg = <0x13050000 0x1000>; - - interrupt-parent = <&intc>; - interrupts = <31>; - - clocks = <&cgu JZ4725B_CLK_LCD>; - clock-names = "lcd"; - - port { - panel_output: endpoint { - remote-endpoint = <&panel_input>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml new file mode 100644 index 000000000000..d56db1802fad --- /dev/null +++ b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/ingenic,lcd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs LCD controller devicetree bindings + +maintainers: + - Paul Cercueil + +properties: + $nodename: + pattern: "^lcd-controller@[0-9a-f]+$" + + compatible: + enum: + - ingenic,jz4740-lcd + - ingenic,jz4725b-lcd + - ingenic,jz4770-lcd + - ingenic,jz4780-lcd + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Pixel clock + - description: Module clock + minItems: 1 + + clock-names: + items: + - const: lcd_pclk + - const: lcd + minItems: 1 + + port: + description: OF graph bindings (specified in bindings/graph.txt). + + ports: + description: OF graph bindings (specified in bindings/graph.txt). + type: object + properties: + port@0: + type: object + description: DPI output, to interface with TFT panels. + + port@8: + type: object + description: Link to the Image Processing Unit (IPU). + (See ingenic,ipu.yaml). + + required: + - port@0 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +if: + properties: + compatible: + contains: + enum: + - ingenic,jz4740-lcd + - ingenic,jz4780-lcd +then: + properties: + clocks: + minItems: 2 + clock-names: + minItems: 2 +else: + properties: + clocks: + maxItems: 1 + clock-names: + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include + lcd-controller@13050000 { + compatible = "ingenic,jz4740-lcd"; + reg = <0x13050000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <30>; + + clocks = <&cgu JZ4740_CLK_LCD_PCLK>, <&cgu JZ4740_CLK_LCD>; + clock-names = "lcd_pclk", "lcd"; + + port { + endpoint { + remote-endpoint = <&panel_input>; + }; + }; + }; + + - | + #include + lcd-controller@13050000 { + compatible = "ingenic,jz4725b-lcd"; + reg = <0x13050000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <31>; + + clocks = <&cgu JZ4725B_CLK_LCD>; + clock-names = "lcd_pclk"; + + port { + endpoint { + remote-endpoint = <&panel_input>; + }; + }; + }; -- cgit v1.2.3 From ba8989a6fd7a8a94e9740ad260f1dcc1831f9aeb Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Thu, 16 Jul 2020 18:38:37 +0200 Subject: dt-bindings: display: Add ingenic,ipu.yaml Add documentation of the Device Tree bindings for the Image Processing Unit (IPU) found in most Ingenic SoCs. v2: Add missing 'const' in items list v3: No change Signed-off-by: Paul Cercueil Reviewed-by: Rob Herring Reviewed-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-3-paul@crapouillou.net --- .../devicetree/bindings/display/ingenic,ipu.yaml | 65 ++++++++++++++++++++++ 1 file changed, 65 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/ingenic,ipu.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/ingenic,ipu.yaml b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml new file mode 100644 index 000000000000..5bfc33eb32c9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/ingenic,ipu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs Image Processing Unit (IPU) devicetree bindings + +maintainers: + - Paul Cercueil + +properties: + compatible: + oneOf: + - enum: + - ingenic,jz4725b-ipu + - ingenic,jz4760-ipu + - items: + - const: ingenic,jz4770-ipu + - const: ingenic,jz4760-ipu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: ipu + +patternProperties: + "^ports?$": + description: OF graph bindings (specified in bindings/graph.txt). + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + ipu@13080000 { + compatible = "ingenic,jz4770-ipu", "ingenic,jz4760-ipu"; + reg = <0x13080000 0x800>; + + interrupt-parent = <&intc>; + interrupts = <29>; + + clocks = <&cgu JZ4770_CLK_IPU>; + clock-names = "ipu"; + + port { + ipu_ep: endpoint { + remote-endpoint = <&lcdc_ep>; + }; + }; + }; -- cgit v1.2.3 From ef9303fdf46f770e8534ab6f72bad946e70ddfc3 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 17 Jul 2020 04:33:33 +0300 Subject: dt: bindings: dma: xilinx: dpdma: DT bindings for Xilinx DPDMA The ZynqMP includes the DisplayPort subsystem with its own DMA engine called DPDMA. The DPDMA IP comes with 6 individual channels (4 for display, 2 for audio). This documentation describes DT bindings of DPDMA. Signed-off-by: Hyun Kwon Signed-off-by: Michal Simek Signed-off-by: Laurent Pinchart Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20200717013337.24122-2-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul --- .../bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml | 68 ++++++++++++++++++++++ MAINTAINERS | 8 +++ include/dt-bindings/dma/xlnx-zynqmp-dpdma.h | 16 +++++ 3 files changed, 92 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml create mode 100644 include/dt-bindings/dma/xlnx-zynqmp-dpdma.h (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml new file mode 100644 index 000000000000..5de510f8c88c --- /dev/null +++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/xilinx/xlnx,zynqmp-dpdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx ZynqMP DisplayPort DMA Controller Device Tree Bindings + +description: | + These bindings describe the DMA engine included in the Xilinx ZynqMP + DisplayPort Subsystem. The DMA engine supports up to 6 DMA channels (3 + channels for a video stream, 1 channel for a graphics stream, and 2 channels + for an audio stream). + +maintainers: + - Laurent Pinchart + +allOf: + - $ref: "../dma-controller.yaml#" + +properties: + "#dma-cells": + const: 1 + description: | + The cell is the DMA channel ID (see dt-bindings/dma/xlnx-zynqmp-dpdma.h + for a list of channel IDs). + + compatible: + const: xlnx,zynqmp-dpdma + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: The AXI clock + maxItems: 1 + + clock-names: + const: axi_clk + +required: + - "#dma-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + + dma: dma-controller@fd4c0000 { + compatible = "xlnx,zynqmp-dpdma"; + reg = <0x0 0xfd4c0000 0x0 0x1000>; + interrupts = ; + interrupt-parent = <&gic>; + clocks = <&dpdma_clk>; + clock-names = "axi_clk"; + #dma-cells = <1>; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index 68f21d46614c..fa52d4f9f8c8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18852,6 +18852,14 @@ F: Documentation/devicetree/bindings/media/xilinx/ F: drivers/media/platform/xilinx/ F: include/uapi/linux/xilinx-v4l2-controls.h +XILINX ZYNQMP DPDMA DRIVER +M: Hyun Kwon +M: Laurent Pinchart +L: dmaengine@vger.kernel.org +S: Supported +F: Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml +F: include/dt-bindings/dma/xlnx-zynqmp-dpdma.h + XILLYBUS DRIVER M: Eli Billauer L: linux-kernel@vger.kernel.org diff --git a/include/dt-bindings/dma/xlnx-zynqmp-dpdma.h b/include/dt-bindings/dma/xlnx-zynqmp-dpdma.h new file mode 100644 index 000000000000..3719cda5679d --- /dev/null +++ b/include/dt-bindings/dma/xlnx-zynqmp-dpdma.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/* + * Copyright 2019 Laurent Pinchart + */ + +#ifndef __DT_BINDINGS_DMA_XLNX_ZYNQMP_DPDMA_H__ +#define __DT_BINDINGS_DMA_XLNX_ZYNQMP_DPDMA_H__ + +#define ZYNQMP_DPDMA_VIDEO0 0 +#define ZYNQMP_DPDMA_VIDEO1 1 +#define ZYNQMP_DPDMA_VIDEO2 2 +#define ZYNQMP_DPDMA_GRAPHICS 3 +#define ZYNQMP_DPDMA_AUDIO0 4 +#define ZYNQMP_DPDMA_AUDIO1 5 + +#endif /* __DT_BINDINGS_DMA_XLNX_ZYNQMP_DPDMA_H__ */ -- cgit v1.2.3 From 9c8ebd8b82da89c2484594b61d66288d24983348 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 17 Jul 2020 04:33:34 +0300 Subject: dmaengine: Add support for repeating transactions DMA engines used with displays perform 2D interleaved transfers to read framebuffers from memory and feed the data to the display engine. As the same framebuffer can be displayed for multiple frames, the DMA transactions need to be repeated until a new framebuffer replaces the current one. This feature is implemented natively by some DMA engines that have the ability to repeat transactions and switch to a new transaction at the end of a transfer without any race condition or frame loss. This patch implements support for this feature in the DMA engine API. A new DMA_PREP_REPEAT transaction flag allows DMA clients to instruct the DMA channel to repeat the transaction automatically until one or more new transactions are issued on the channel (or until all active DMA transfers are explicitly terminated with the dmaengine_terminate_*() functions). A new DMA_REPEAT transaction type is also added for DMA engine drivers to report their support of the DMA_PREP_REPEAT flag. A new DMA_PREP_LOAD_EOT transaction flag is also introduced (with a corresponding DMA_LOAD_EOT capability bit), as requested during the review of v4. The flag instructs the DMA channel that the transaction being queued should replace the active repeated transaction when the latter terminates (at End Of Transaction). Not setting the flag will result in the active repeated transaction to continue being repeated, and the new transaction being silently ignored. The DMA_PREP_REPEAT flag is currently supported for interleaved transactions only. Its usage can easily be extended to cover more transaction types simply by adding an appropriate check in the corresponding dmaengine_prep_*() function. Signed-off-by: Laurent Pinchart Reviewed-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200717013337.24122-3-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul --- Documentation/driver-api/dmaengine/client.rst | 4 +- Documentation/driver-api/dmaengine/provider.rst | 49 +++++++++++++++++++++++++ include/linux/dmaengine.h | 17 +++++++++ 3 files changed, 69 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/driver-api/dmaengine/client.rst b/Documentation/driver-api/dmaengine/client.rst index 2104830a99ae..41938aa2bdeb 100644 --- a/Documentation/driver-api/dmaengine/client.rst +++ b/Documentation/driver-api/dmaengine/client.rst @@ -86,7 +86,9 @@ The details of these operations are: - interleaved_dma: This is common to Slave as well as M2M clients. For slave address of devices' fifo could be already known to the driver. Various types of operations could be expressed by setting - appropriate values to the 'dma_interleaved_template' members. + appropriate values to the 'dma_interleaved_template' members. Cyclic + interleaved DMA transfers are also possible if supported by the channel by + setting the DMA_PREP_REPEAT transfer flag. A non-NULL return of this transfer API represents a "descriptor" for the given transaction. diff --git a/Documentation/driver-api/dmaengine/provider.rst b/Documentation/driver-api/dmaengine/provider.rst index 56e5833e8a07..f896acccdfee 100644 --- a/Documentation/driver-api/dmaengine/provider.rst +++ b/Documentation/driver-api/dmaengine/provider.rst @@ -239,6 +239,27 @@ Currently, the types available are: want to transfer a portion of uncompressed data directly to the display to print it +- DMA_REPEAT + + - The device supports repeated transfers. A repeated transfer, indicated by + the DMA_PREP_REPEAT transfer flag, is similar to a cyclic transfer in that + it gets automatically repeated when it ends, but can additionally be + replaced by the client. + + - This feature is limited to interleaved transfers, this flag should thus not + be set if the DMA_INTERLEAVE flag isn't set. This limitation is based on + the current needs of DMA clients, support for additional transfer types + should be added in the future if and when the need arises. + +- DMA_LOAD_EOT + + - The device supports replacing repeated transfers at end of transfer (EOT) + by queuing a new transfer with the DMA_PREP_LOAD_EOT flag set. + + - Support for replacing a currently running transfer at another point (such + as end of burst instead of end of transfer) will be added in the future + based on DMA clients needs, if and when the need arises. + These various types will also affect how the source and destination addresses change over time. @@ -531,6 +552,34 @@ DMA_CTRL_REUSE writes for which the descriptor should be in different format from normal data descriptors. +- DMA_PREP_REPEAT + + - If set, the transfer will be automatically repeated when it ends until a + new transfer is queued on the same channel with the DMA_PREP_LOAD_EOT flag. + If the next transfer to be queued on the channel does not have the + DMA_PREP_LOAD_EOT flag set, the current transfer will be repeated until the + client terminates all transfers. + + - This flag is only supported if the channel reports the DMA_REPEAT + capability. + +- DMA_PREP_LOAD_EOT + + - If set, the transfer will replace the transfer currently being executed at + the end of the transfer. + + - This is the default behaviour for non-repeated transfers, specifying + DMA_PREP_LOAD_EOT for non-repeated transfers will thus make no difference. + + - When using repeated transfers, DMA clients will usually need to set the + DMA_PREP_LOAD_EOT flag on all transfers, otherwise the channel will keep + repeating the last repeated transfer and ignore the new transfers being + queued. Failure to set DMA_PREP_LOAD_EOT will appear as if the channel was + stuck on the previous transfer. + + - This flag is only supported if the channel reports the DMA_LOAD_EOT + capability. + General Design Notes ==================== diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index e1c03339918f..328e3aca7f51 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -61,6 +61,8 @@ enum dma_transaction_type { DMA_SLAVE, DMA_CYCLIC, DMA_INTERLEAVE, + DMA_REPEAT, + DMA_LOAD_EOT, /* last transaction type for creation of the capabilities mask */ DMA_TX_TYPE_END, }; @@ -176,6 +178,16 @@ struct dma_interleaved_template { * @DMA_PREP_CMD: tell the driver that the data passed to DMA API is command * data and the descriptor should be in different format from normal * data descriptors. + * @DMA_PREP_REPEAT: tell the driver that the transaction shall be automatically + * repeated when it ends until a transaction is issued on the same channel + * with the DMA_PREP_LOAD_EOT flag set. This flag is only applicable to + * interleaved transactions and is ignored for all other transaction types. + * @DMA_PREP_LOAD_EOT: tell the driver that the transaction shall replace any + * active repeated (as indicated by DMA_PREP_REPEAT) transaction when the + * repeated transaction ends. Not setting this flag when the previously queued + * transaction is marked with DMA_PREP_REPEAT will cause the new transaction + * to never be processed and stay in the issued queue forever. The flag is + * ignored if the previous transaction is not a repeated transaction. */ enum dma_ctrl_flags { DMA_PREP_INTERRUPT = (1 << 0), @@ -186,6 +198,8 @@ enum dma_ctrl_flags { DMA_PREP_FENCE = (1 << 5), DMA_CTRL_REUSE = (1 << 6), DMA_PREP_CMD = (1 << 7), + DMA_PREP_REPEAT = (1 << 8), + DMA_PREP_LOAD_EOT = (1 << 9), }; /** @@ -980,6 +994,9 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_interleaved_dma( { if (!chan || !chan->device || !chan->device->device_prep_interleaved_dma) return NULL; + if (flags & DMA_PREP_REPEAT && + !test_bit(DMA_REPEAT, chan->device->cap_mask.bits)) + return NULL; return chan->device->device_prep_interleaved_dma(chan, xt, flags); } -- cgit v1.2.3 From e7c7970a678d5ca945663e9f211e4dc636ccbd52 Mon Sep 17 00:00:00 2001 From: Hyun Kwon Date: Sat, 7 Jul 2018 19:05:35 -0700 Subject: dt-bindings: display: xlnx: Add ZynqMP DP subsystem bindings The bindings describe the ZynqMP DP subsystem. They don't support the interface with the programmable logic (FPGA) or audio yet. Signed-off-by: Hyun Kwon Signed-off-by: Laurent Pinchart Reviewed-by: Rob Herring Acked-by: Sam Ravnborg --- .../bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml | 174 +++++++++++++++++++++ 1 file changed, 174 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml new file mode 100644 index 000000000000..52a939cade3b --- /dev/null +++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml @@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/xlnx/xlnx,zynqmp-dpsub.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx ZynqMP DisplayPort Subsystem + +description: | + The DisplayPort subsystem of Xilinx ZynqMP (Zynq UltraScale+ MPSoC) + implements the display and audio pipelines based on the DisplayPort v1.2 + standard. The subsystem includes multiple functional blocks as below: + + +------------------------------------------------------------+ + +--------+ | +----------------+ +-----------+ | + | DPDMA | --->| | --> | Video | Video +-------------+ | + | 4x vid | | | | | Rendering | -+--> | | | +------+ + | 2x aud | | | Audio/Video | --> | Pipeline | | | DisplayPort |---> | PHY0 | + +--------+ | | Buffer Manager | +-----------+ | | Source | | +------+ + | | and STC | +-----------+ | | Controller | | +------+ + Live Video --->| | --> | Audio | Audio | |---> | PHY1 | + | | | | Mixer | --+-> | | | +------+ + Live Audio --->| | --> | | || +-------------+ | + | +----------------+ +-----------+ || | + +---------------------------------------||-------------------+ + vv + Blended Video and + Mixed Audio to PL + + The Buffer Manager interacts with external interface such as DMA engines or + live audio/video streams from the programmable logic. The Video Rendering + Pipeline blends the video and graphics layers and performs colorspace + conversion. The Audio Mixer mixes the incoming audio streams. The DisplayPort + Source Controller handles the DisplayPort protocol and connects to external + PHYs. + + The subsystem supports 2 video and 2 audio streams, and various pixel formats + and depths up to 4K@30 resolution. + + Please refer to "Zynq UltraScale+ Device Technical Reference Manual" + (https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf) + for more details. + +maintainers: + - Laurent Pinchart + +properties: + compatible: + const: xlnx,zynqmp-dpsub-1.7 + + reg: + maxItems: 4 + reg-names: + items: + - const: dp + - const: blend + - const: av_buf + - const: aud + + interrupts: + maxItems: 1 + + clocks: + description: + The APB clock and at least one video clock are mandatory, the audio clock + is optional. + minItems: 2 + maxItems: 4 + items: + - description: dp_apb_clk is the APB clock + - description: dp_aud_clk is the Audio clock + - description: + dp_vtc_pixel_clk_in is the non-live video clock (from Processing + System) + - description: + dp_live_video_in_clk is the live video clock (from Programmable + Logic) + clock-names: + oneOf: + - minItems: 2 + maxItems: 3 + items: + - const: dp_apb_clk + - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ] + - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ] + - minItems: 3 + maxItems: 4 + items: + - const: dp_apb_clk + - const: dp_aud_clk + - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ] + - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ] + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + maxItems: 4 + items: + - description: Video layer, plane 0 (RGB or luma) + - description: Video layer, plane 1 (U/V or U) + - description: Video layer, plane 2 (V) + - description: Graphics layer + dma-names: + items: + - const: vid0 + - const: vid1 + - const: vid2 + - const: gfx0 + + phys: + description: PHYs for the DP data lanes + minItems: 1 + maxItems: 2 + phy-names: + minItems: 1 + maxItems: 2 + items: + - const: dp-phy0 + - const: dp-phy1 + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - power-domains + - resets + - dmas + - dma-names + - phys + - phy-names + +additionalProperties: false + +examples: + - | + #include + #include + + display@fd4a0000 { + compatible = "xlnx,zynqmp-dpsub-1.7"; + reg = <0x0 0xfd4a0000 0x0 0x1000>, + <0x0 0xfd4aa000 0x0 0x1000>, + <0x0 0xfd4ab000 0x0 0x1000>, + <0x0 0xfd4ac000 0x0 0x1000>; + reg-names = "dp", "blend", "av_buf", "aud"; + interrupts = <0 119 4>; + interrupt-parent = <&gic>; + + clock-names = "dp_apb_clk", "dp_aud_clk", "dp_live_video_in_clk"; + clocks = <&dp_aclk>, <&clkc 17>, <&si570_1>; + + power-domains = <&pd_dp>; + resets = <&reset ZYNQMP_RESET_DP>; + + dma-names = "vid0", "vid1", "vid2", "gfx0"; + dmas = <&xlnx_dpdma 0>, + <&xlnx_dpdma 1>, + <&xlnx_dpdma 2>, + <&xlnx_dpdma 3>; + + phys = <&psgtr 1 PHY_TYPE_DP 0 3 27000000>, + <&psgtr 0 PHY_TYPE_DP 1 3 27000000>; + + phy-names = "dp-phy0", "dp-phy1"; + }; + +... -- cgit v1.2.3 From b0487e0d96d58906e286592dd02e7292f53e399a Mon Sep 17 00:00:00 2001 From: Alexander A. Klimov Date: Sun, 19 Jul 2020 19:14:28 +0200 Subject: drm: Replace HTTP links with HTTPS ones Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20200719171428.60470-1-grandmaster@al2klimov.de --- Documentation/gpu/vgaarbiter.rst | 8 ++++---- drivers/gpu/drm/drm_modes.c | 2 +- include/uapi/drm/drm_mode.h | 2 +- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/gpu/vgaarbiter.rst b/Documentation/gpu/vgaarbiter.rst index 0b41b051d021..339ed5fecd2e 100644 --- a/Documentation/gpu/vgaarbiter.rst +++ b/Documentation/gpu/vgaarbiter.rst @@ -185,7 +185,7 @@ enhancing the kernel code to adapt as a kernel module and also did the implementation of the user space side [3]. Now (2009) Tiago Vignatti and Dave Airlie finally put this work in shape and queued to Jesse Barnes' PCI tree. -0) http://cgit.freedesktop.org/xorg/xserver/commit/?id=4b42448a2388d40f257774fbffdccaea87bd0347 -1) http://lists.freedesktop.org/archives/xorg/2005-March/006663.html -2) http://lists.freedesktop.org/archives/xorg/2005-March/006745.html -3) http://lists.freedesktop.org/archives/xorg/2007-October/029507.html +0) https://cgit.freedesktop.org/xorg/xserver/commit/?id=4b42448a2388d40f257774fbffdccaea87bd0347 +1) https://lists.freedesktop.org/archives/xorg/2005-March/006663.html +2) https://lists.freedesktop.org/archives/xorg/2005-March/006745.html +3) https://lists.freedesktop.org/archives/xorg/2007-October/029507.html diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index f2865f88bd54..14b6f7638728 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -548,7 +548,7 @@ EXPORT_SYMBOL(drm_gtf_mode_complex); * Generalized Timing Formula is derived from: * * GTF Spreadsheet by Andy Morrish (1/5/97) - * available at http://www.vesa.org + * available at https://www.vesa.org * * And it is copied from the file of xserver/hw/xfree86/modes/xf86gtf.c. * What I have done is to translate it by using integer calculation. diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h index 735c8cfdaaa1..deea447e5f22 100644 --- a/include/uapi/drm/drm_mode.h +++ b/include/uapi/drm/drm_mode.h @@ -497,7 +497,7 @@ struct drm_mode_fb_cmd2 { * In case of planar formats, this ioctl allows up to 4 * buffer objects with offsets and pitches per plane. * The pitch and offset order is dictated by the fourcc, - * e.g. NV12 (http://fourcc.org/yuv.php#NV12) is described as: + * e.g. NV12 (https://fourcc.org/yuv.php#NV12) is described as: * * YUV 4:2:0 image with a plane of 8 bit Y samples * followed by an interleaved U/V plane containing -- cgit v1.2.3 From 7c7b2a35a97c6927fedd5f39c559a413d8259d01 Mon Sep 17 00:00:00 2001 From: Alexander A. Klimov Date: Sun, 19 Jul 2020 22:37:14 +0200 Subject: video: fbdev: Replace HTTP links with HTTPS ones Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20200719203714.61745-1-grandmaster@al2klimov.de --- Documentation/fb/ep93xx-fb.rst | 2 +- drivers/video/fbdev/Kconfig | 8 ++++---- drivers/video/fbdev/core/fbmon.c | 4 ++-- drivers/video/fbdev/ep93xx-fb.c | 2 +- drivers/video/fbdev/grvga.c | 2 +- drivers/video/fbdev/macfb.c | 2 +- drivers/video/fbdev/metronomefb.c | 2 +- drivers/video/fbdev/omap2/omapfb/dss/Kconfig | 4 ++-- drivers/video/fbdev/omap2/omapfb/dss/hdmi.h | 2 +- drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c | 2 +- drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.c | 2 +- drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.h | 2 +- drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.h | 2 +- drivers/video/fbdev/sa1100fb.c | 2 +- 14 files changed, 19 insertions(+), 19 deletions(-) (limited to 'Documentation') diff --git a/Documentation/fb/ep93xx-fb.rst b/Documentation/fb/ep93xx-fb.rst index 6f7767926d1a..1dd67f4688c7 100644 --- a/Documentation/fb/ep93xx-fb.rst +++ b/Documentation/fb/ep93xx-fb.rst @@ -127,7 +127,7 @@ At least on the EP9315 there is a silicon bug which causes bit 27 of the VIDSCRNPAGE (framebuffer physical offset) to be tied low. There is an unofficial errata for this bug at:: - http://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2 + https://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2 By default the EP93xx framebuffer driver checks if the allocated physical address has bit 27 set. If it does, then the memory is freed and an diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index b33bb6318c2b..bd5a9773a588 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -824,7 +824,7 @@ config FB_OPENCORES systems (e.g. Altera socfpga or Xilinx Zynq) on FPGAs. The source code and specification for the core is available at - + config FB_S1D13XXX tristate "Epson S1D13XXX framebuffer support" @@ -835,7 +835,7 @@ config FB_S1D13XXX help Support for S1D13XXX framebuffer device family (currently only working with S1D13806). Product specs at - + config FB_ATMEL tristate "AT91 LCD Controller support" @@ -1193,7 +1193,7 @@ config FB_RADEON don't need to choose this to run the Radeon in plain VGA mode. There is a product page at - http://products.amd.com/en-us/GraphicCardResult.aspx + https://products.amd.com/en-us/GraphicCardResult.aspx config FB_RADEON_I2C bool "DDC/I2C for ATI Radeon support" @@ -1361,7 +1361,7 @@ config FB_SIS help This is the frame buffer device driver for the SiS 300, 315, 330 and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. - Specs available at and . + Specs available at and . To compile this driver as a module, choose M here; the module will be called sisfb. diff --git a/drivers/video/fbdev/core/fbmon.c b/drivers/video/fbdev/core/fbmon.c index d62a1e43864e..1bf82dbc9e3c 100644 --- a/drivers/video/fbdev/core/fbmon.c +++ b/drivers/video/fbdev/core/fbmon.c @@ -19,7 +19,7 @@ * Generalized Timing Formula is derived from: * * GTF Spreadsheet by Andy Morrish (1/5/97) - * available at http://www.vesa.org + * available at https://www.vesa.org * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive @@ -1201,7 +1201,7 @@ static void fb_timings_dclk(struct __fb_timings *timings) * ignored and @var will be filled with the calculated timings. * * All calculations are based on the VESA GTF Spreadsheet - * available at VESA's public ftp (http://www.vesa.org). + * available at VESA's public ftp (https://www.vesa.org). * * NOTES: * The timings generated by the GTF will be different from VESA diff --git a/drivers/video/fbdev/ep93xx-fb.c b/drivers/video/fbdev/ep93xx-fb.c index cda2ef337423..ba33b4dce0df 100644 --- a/drivers/video/fbdev/ep93xx-fb.c +++ b/drivers/video/fbdev/ep93xx-fb.c @@ -430,7 +430,7 @@ static int ep93xxfb_alloc_videomem(struct fb_info *info) /* * There is a bug in the ep93xx framebuffer which causes problems * if bit 27 of the physical address is set. - * See: http://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2 + * See: https://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2 * There does not seem to be any official errata for this, but I * have confirmed the problem exists on my hardware (ep9315) at * least. diff --git a/drivers/video/fbdev/grvga.c b/drivers/video/fbdev/grvga.c index 07dda03e0957..24818b276241 100644 --- a/drivers/video/fbdev/grvga.c +++ b/drivers/video/fbdev/grvga.c @@ -5,7 +5,7 @@ * 2011 (c) Aeroflex Gaisler AB * * Full documentation of the core can be found here: - * http://www.gaisler.com/products/grlib/grip.pdf + * https://www.gaisler.com/products/grlib/grip.pdf * * Contributors: Kristoffer Glembo */ diff --git a/drivers/video/fbdev/macfb.c b/drivers/video/fbdev/macfb.c index e05a97662ca8..312e35c9aa6c 100644 --- a/drivers/video/fbdev/macfb.c +++ b/drivers/video/fbdev/macfb.c @@ -478,7 +478,7 @@ static int macfb_setcolreg(unsigned regno, unsigned red, unsigned green, break; /* * 24-bit colour almost doesn't exist on 68k Macs -- - * http://support.apple.com/kb/TA28634 (Old Article: 10992) + * https://support.apple.com/kb/TA28634 (Old Article: 10992) */ case 24: case 32: diff --git a/drivers/video/fbdev/metronomefb.c b/drivers/video/fbdev/metronomefb.c index a42e2eceee48..952826557a0c 100644 --- a/drivers/video/fbdev/metronomefb.c +++ b/drivers/video/fbdev/metronomefb.c @@ -10,7 +10,7 @@ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. * * This work was made possible by help and equipment support from E-Ink - * Corporation. http://www.eink.com/ + * Corporation. https://www.eink.com/ * * This driver is written to be used with the Metronome display controller. * It is intended to be architecture independent. A board specific driver diff --git a/drivers/video/fbdev/omap2/omapfb/dss/Kconfig b/drivers/video/fbdev/omap2/omapfb/dss/Kconfig index 36b97fee2d57..cc81a19537d2 100644 --- a/drivers/video/fbdev/omap2/omapfb/dss/Kconfig +++ b/drivers/video/fbdev/omap2/omapfb/dss/Kconfig @@ -60,7 +60,7 @@ config FB_OMAP5_DSS_HDMI select FB_OMAP2_DSS_HDMI_COMMON help HDMI Interface for OMAP5 and similar cores. This adds the High - Definition Multimedia Interface. See http://www.hdmi.org/ for HDMI + Definition Multimedia Interface. See https://www.hdmi.org/ for HDMI specification. config FB_OMAP2_DSS_SDI @@ -79,7 +79,7 @@ config FB_OMAP2_DSS_DSI DSI is a high speed half-duplex serial interface between the host processor and a peripheral, such as a display or a framebuffer chip. - See http://www.mipi.org/ for DSI specifications. + See https://www.mipi.org/ for DSI specifications. config FB_OMAP2_DSS_MIN_FCK_PER_PCK int "Minimum FCK/PCK ratio (for scaling)" diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi.h b/drivers/video/fbdev/omap2/omapfb/dss/hdmi.h index b9d4480ecfad..9a7253355f6d 100644 --- a/drivers/video/fbdev/omap2/omapfb/dss/hdmi.h +++ b/drivers/video/fbdev/omap2/omapfb/dss/hdmi.h @@ -2,7 +2,7 @@ /* * HDMI driver definition for TI OMAP4 Processor. * - * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com/ */ #ifndef _HDMI_H diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c b/drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c index 1bbbda21d76c..22f1d37a968a 100644 --- a/drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c +++ b/drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /* * HDMI interface DSS driver for TI's OMAP4 family of SoCs. - * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com/ * Authors: Yong Zhi * Mythri pk */ diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.c b/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.c index 6b79b52d5fad..7ca1803bf161 100644 --- a/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.c +++ b/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.c @@ -3,7 +3,7 @@ * ti_hdmi_4xxx_ip.c * * HDMI TI81xx, TI38xx, TI OMAP4 etc IP driver Library - * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com/ * Authors: Yong Zhi * Mythri pk */ diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.h b/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.h index f066d1f69132..b5c35277f06e 100644 --- a/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.h +++ b/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.h @@ -2,7 +2,7 @@ /* * HDMI header definition for OMAP4 HDMI core IP * - * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com/ */ #ifndef _HDMI4_CORE_H_ diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.h b/drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.h index f10b8a283011..192c9b6e2f7b 100644 --- a/drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.h +++ b/drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.h @@ -2,7 +2,7 @@ /* * HDMI driver definition for TI OMAP5 processors. * - * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/ */ #ifndef _HDMI5_CORE_H_ diff --git a/drivers/video/fbdev/sa1100fb.c b/drivers/video/fbdev/sa1100fb.c index 3e6e13f7a831..bda6cc313c8b 100644 --- a/drivers/video/fbdev/sa1100fb.c +++ b/drivers/video/fbdev/sa1100fb.c @@ -18,7 +18,7 @@ * Clean patches should be sent to the ARM Linux Patch System. Please see the * following web page for more information: * - * http://www.arm.linux.org.uk/developer/patches/info.shtml + * https://www.arm.linux.org.uk/developer/patches/info.shtml * * Thank you. * -- cgit v1.2.3 From 5fbff813a4a328b730cb117027c43a4ae9d8b6c0 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 7 Jul 2020 22:12:05 +0200 Subject: dma-fence: basic lockdep annotations Design is similar to the lockdep annotations for workers, but with some twists: - We use a read-lock for the execution/worker/completion side, so that this explicit annotation can be more liberally sprinkled around. With read locks lockdep isn't going to complain if the read-side isn't nested the same way under all circumstances, so ABBA deadlocks are ok. Which they are, since this is an annotation only. - We're using non-recursive lockdep read lock mode, since in recursive read lock mode lockdep does not catch read side hazards. And we _very_ much want read side hazards to be caught. For full details of this limitation see commit e91498589746065e3ae95d9a00b068e525eec34f Author: Peter Zijlstra Date: Wed Aug 23 13:13:11 2017 +0200 locking/lockdep/selftests: Add mixed read-write ABBA tests - To allow nesting of the read-side explicit annotations we explicitly keep track of the nesting. lock_is_held() allows us to do that. - The wait-side annotation is a write lock, and entirely done within dma_fence_wait() for everyone by default. - To be able to freely annotate helper functions I want to make it ok to call dma_fence_begin/end_signalling from soft/hardirq context. First attempt was using the hardirq locking context for the write side in lockdep, but this forces all normal spinlocks nested within dma_fence_begin/end_signalling to be spinlocks. That bollocks. The approach now is to simple check in_atomic(), and for these cases entirely rely on the might_sleep() check in dma_fence_wait(). That will catch any wrong nesting against spinlocks from soft/hardirq contexts. The idea here is that every code path that's critical for eventually signalling a dma_fence should be annotated with dma_fence_begin/end_signalling. The annotation ideally starts right after a dma_fence is published (added to a dma_resv, exposed as a sync_file fd, attached to a drm_syncobj fd, or anything else that makes the dma_fence visible to other kernel threads), up to and including the dma_fence_wait(). Examples are irq handlers, the scheduler rt threads, the tail of execbuf (after the corresponding fences are visible), any workers that end up signalling dma_fences and really anything else. Not annotated should be code paths that only complete fences opportunistically as the gpu progresses, like e.g. shrinker/eviction code. The main class of deadlocks this is supposed to catch are: Thread A: mutex_lock(A); mutex_unlock(A); dma_fence_signal(); Thread B: mutex_lock(A); dma_fence_wait(); mutex_unlock(A); Thread B is blocked on A signalling the fence, but A never gets around to that because it cannot acquire the lock A. Note that dma_fence_wait() is allowed to be nested within dma_fence_begin/end_signalling sections. To allow this to happen the read lock needs to be upgraded to a write lock, which means that any other lock is acquired between the dma_fence_begin_signalling() call and the call to dma_fence_wait(), and still held, this will result in an immediate lockdep complaint. The only other option would be to not annotate such calls, defeating the point. Therefore these annotations cannot be sprinkled over the code entirely mindless to avoid false positives. Originally I hope that the cross-release lockdep extensions would alleviate the need for explicit annotations: https://lwn.net/Articles/709849/ But there's a few reasons why that's not an option: - It's not happening in upstream, since it got reverted due to too many false positives: commit e966eaeeb623f09975ef362c2866fae6f86844f9 Author: Ingo Molnar Date: Tue Dec 12 12:31:16 2017 +0100 locking/lockdep: Remove the cross-release locking checks This code (CONFIG_LOCKDEP_CROSSRELEASE=y and CONFIG_LOCKDEP_COMPLETIONS=y), while it found a number of old bugs initially, was also causing too many false positives that caused people to disable lockdep - which is arguably a worse overall outcome. - cross-release uses the complete() call to annotate the end of critical sections, for dma_fence that would be dma_fence_signal(). But we do not want all dma_fence_signal() calls to be treated as critical, since many are opportunistic cleanup of gpu requests. If these get stuck there's still the main completion interrupt and workers who can unblock everyone. Automatically annotating all dma_fence_signal() calls would hence cause false positives. - cross-release had some educated guesses for when a critical section starts, like fresh syscall or fresh work callback. This would again cause false positives without explicit annotations, since for dma_fence the critical sections only starts when we publish a fence. - Furthermore there can be cases where a thread never does a dma_fence_signal, but is still critical for reaching completion of fences. One example would be a scheduler kthread which picks up jobs and pushes them into hardware, where the interrupt handler or another completion thread calls dma_fence_signal(). But if the scheduler thread hangs, then all the fences hang, hence we need to manually annotate it. cross-release aimed to solve this by chaining cross-release dependencies, but the dependency from scheduler thread to the completion interrupt handler goes through hw where cross-release code can't observe it. In short, without manual annotations and careful review of the start and end of critical sections, cross-relese dependency tracking doesn't work. We need explicit annotations. v2: handle soft/hardirq ctx better against write side and dont forget EXPORT_SYMBOL, drivers can't use this otherwise. v3: Kerneldoc. v4: Some spelling fixes from Mika v5: Amend commit message to explain in detail why cross-release isn't the solution. v6: Pull out misplaced .rst hunk. Acked-by: Christian König Acked-by: Dave Airlie Cc: Felix Kuehling Reviewed-by: Thomas Hellström Reviewed-by: Maarten Lankhorst Cc: Mika Kuoppala Cc: Thomas Hellstrom Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Cc: linux-rdma@vger.kernel.org Cc: amd-gfx@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: Chris Wilson Cc: Maarten Lankhorst Cc: Christian König Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20200707201229.472834-2-daniel.vetter@ffwll.ch --- Documentation/driver-api/dma-buf.rst | 6 ++ drivers/dma-buf/dma-fence.c | 161 +++++++++++++++++++++++++++++++++++ include/linux/dma-fence.h | 12 +++ 3 files changed, 179 insertions(+) (limited to 'Documentation') diff --git a/Documentation/driver-api/dma-buf.rst b/Documentation/driver-api/dma-buf.rst index 7fb7b661febd..05d856131140 100644 --- a/Documentation/driver-api/dma-buf.rst +++ b/Documentation/driver-api/dma-buf.rst @@ -133,6 +133,12 @@ DMA Fences .. kernel-doc:: drivers/dma-buf/dma-fence.c :doc: DMA fences overview +DMA Fence Signalling Annotations +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/dma-buf/dma-fence.c + :doc: fence signalling annotation + DMA Fences Functions Reference ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/drivers/dma-buf/dma-fence.c b/drivers/dma-buf/dma-fence.c index 656e9ac2d028..0005bc002529 100644 --- a/drivers/dma-buf/dma-fence.c +++ b/drivers/dma-buf/dma-fence.c @@ -110,6 +110,160 @@ u64 dma_fence_context_alloc(unsigned num) } EXPORT_SYMBOL(dma_fence_context_alloc); +/** + * DOC: fence signalling annotation + * + * Proving correctness of all the kernel code around &dma_fence through code + * review and testing is tricky for a few reasons: + * + * * It is a cross-driver contract, and therefore all drivers must follow the + * same rules for lock nesting order, calling contexts for various functions + * and anything else significant for in-kernel interfaces. But it is also + * impossible to test all drivers in a single machine, hence brute-force N vs. + * N testing of all combinations is impossible. Even just limiting to the + * possible combinations is infeasible. + * + * * There is an enormous amount of driver code involved. For render drivers + * there's the tail of command submission, after fences are published, + * scheduler code, interrupt and workers to process job completion, + * and timeout, gpu reset and gpu hang recovery code. Plus for integration + * with core mm with have &mmu_notifier, respectively &mmu_interval_notifier, + * and &shrinker. For modesetting drivers there's the commit tail functions + * between when fences for an atomic modeset are published, and when the + * corresponding vblank completes, including any interrupt processing and + * related workers. Auditing all that code, across all drivers, is not + * feasible. + * + * * Due to how many other subsystems are involved and the locking hierarchies + * this pulls in there is extremely thin wiggle-room for driver-specific + * differences. &dma_fence interacts with almost all of the core memory + * handling through page fault handlers via &dma_resv, dma_resv_lock() and + * dma_resv_unlock(). On the other side it also interacts through all + * allocation sites through &mmu_notifier and &shrinker. + * + * Furthermore lockdep does not handle cross-release dependencies, which means + * any deadlocks between dma_fence_wait() and dma_fence_signal() can't be caught + * at runtime with some quick testing. The simplest example is one thread + * waiting on a &dma_fence while holding a lock:: + * + * lock(A); + * dma_fence_wait(B); + * unlock(A); + * + * while the other thread is stuck trying to acquire the same lock, which + * prevents it from signalling the fence the previous thread is stuck waiting + * on:: + * + * lock(A); + * unlock(A); + * dma_fence_signal(B); + * + * By manually annotating all code relevant to signalling a &dma_fence we can + * teach lockdep about these dependencies, which also helps with the validation + * headache since now lockdep can check all the rules for us:: + * + * cookie = dma_fence_begin_signalling(); + * lock(A); + * unlock(A); + * dma_fence_signal(B); + * dma_fence_end_signalling(cookie); + * + * For using dma_fence_begin_signalling() and dma_fence_end_signalling() to + * annotate critical sections the following rules need to be observed: + * + * * All code necessary to complete a &dma_fence must be annotated, from the + * point where a fence is accessible to other threads, to the point where + * dma_fence_signal() is called. Un-annotated code can contain deadlock issues, + * and due to the very strict rules and many corner cases it is infeasible to + * catch these just with review or normal stress testing. + * + * * &struct dma_resv deserves a special note, since the readers are only + * protected by rcu. This means the signalling critical section starts as soon + * as the new fences are installed, even before dma_resv_unlock() is called. + * + * * The only exception are fast paths and opportunistic signalling code, which + * calls dma_fence_signal() purely as an optimization, but is not required to + * guarantee completion of a &dma_fence. The usual example is a wait IOCTL + * which calls dma_fence_signal(), while the mandatory completion path goes + * through a hardware interrupt and possible job completion worker. + * + * * To aid composability of code, the annotations can be freely nested, as long + * as the overall locking hierarchy is consistent. The annotations also work + * both in interrupt and process context. Due to implementation details this + * requires that callers pass an opaque cookie from + * dma_fence_begin_signalling() to dma_fence_end_signalling(). + * + * * Validation against the cross driver contract is implemented by priming + * lockdep with the relevant hierarchy at boot-up. This means even just + * testing with a single device is enough to validate a driver, at least as + * far as deadlocks with dma_fence_wait() against dma_fence_signal() are + * concerned. + */ +#ifdef CONFIG_LOCKDEP +struct lockdep_map dma_fence_lockdep_map = { + .name = "dma_fence_map" +}; + +/** + * dma_fence_begin_signalling - begin a critical DMA fence signalling section + * + * Drivers should use this to annotate the beginning of any code section + * required to eventually complete &dma_fence by calling dma_fence_signal(). + * + * The end of these critical sections are annotated with + * dma_fence_end_signalling(). + * + * Returns: + * + * Opaque cookie needed by the implementation, which needs to be passed to + * dma_fence_end_signalling(). + */ +bool dma_fence_begin_signalling(void) +{ + /* explicitly nesting ... */ + if (lock_is_held_type(&dma_fence_lockdep_map, 1)) + return true; + + /* rely on might_sleep check for soft/hardirq locks */ + if (in_atomic()) + return true; + + /* ... and non-recursive readlock */ + lock_acquire(&dma_fence_lockdep_map, 0, 0, 1, 1, NULL, _RET_IP_); + + return false; +} +EXPORT_SYMBOL(dma_fence_begin_signalling); + +/** + * dma_fence_end_signalling - end a critical DMA fence signalling section + * + * Closes a critical section annotation opened by dma_fence_begin_signalling(). + */ +void dma_fence_end_signalling(bool cookie) +{ + if (cookie) + return; + + lock_release(&dma_fence_lockdep_map, _RET_IP_); +} +EXPORT_SYMBOL(dma_fence_end_signalling); + +void __dma_fence_might_wait(void) +{ + bool tmp; + + tmp = lock_is_held_type(&dma_fence_lockdep_map, 1); + if (tmp) + lock_release(&dma_fence_lockdep_map, _THIS_IP_); + lock_map_acquire(&dma_fence_lockdep_map); + lock_map_release(&dma_fence_lockdep_map); + if (tmp) + lock_acquire(&dma_fence_lockdep_map, 0, 0, 1, 1, NULL, _THIS_IP_); +} +#endif + + /** * dma_fence_signal_locked - signal completion of a fence * @fence: the fence to signal @@ -170,14 +324,19 @@ int dma_fence_signal(struct dma_fence *fence) { unsigned long flags; int ret; + bool tmp; if (!fence) return -EINVAL; + tmp = dma_fence_begin_signalling(); + spin_lock_irqsave(fence->lock, flags); ret = dma_fence_signal_locked(fence); spin_unlock_irqrestore(fence->lock, flags); + dma_fence_end_signalling(tmp); + return ret; } EXPORT_SYMBOL(dma_fence_signal); @@ -210,6 +369,8 @@ dma_fence_wait_timeout(struct dma_fence *fence, bool intr, signed long timeout) might_sleep(); + __dma_fence_might_wait(); + trace_dma_fence_wait_start(fence); if (fence->ops->wait) ret = fence->ops->wait(fence, intr, timeout); diff --git a/include/linux/dma-fence.h b/include/linux/dma-fence.h index 3347c54f3a87..3f288f7db2ef 100644 --- a/include/linux/dma-fence.h +++ b/include/linux/dma-fence.h @@ -357,6 +357,18 @@ dma_fence_get_rcu_safe(struct dma_fence __rcu **fencep) } while (1); } +#ifdef CONFIG_LOCKDEP +bool dma_fence_begin_signalling(void); +void dma_fence_end_signalling(bool cookie); +#else +static inline bool dma_fence_begin_signalling(void) +{ + return true; +} +static inline void dma_fence_end_signalling(bool cookie) {} +static inline void __dma_fence_might_wait(void) {} +#endif + int dma_fence_signal(struct dma_fence *fence); int dma_fence_signal_locked(struct dma_fence *fence); signed long dma_fence_default_wait(struct dma_fence *fence, -- cgit v1.2.3 From d0b9a9aef0a18e7ba473d0887e7ebd107ab84fe4 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 7 Jul 2020 22:12:06 +0200 Subject: dma-fence: prime lockdep annotations Two in one go: - it is allowed to call dma_fence_wait() while holding a dma_resv_lock(). This is fundamental to how eviction works with ttm, so required. - it is allowed to call dma_fence_wait() from memory reclaim contexts, specifically from shrinker callbacks (which i915 does), and from mmu notifier callbacks (which amdgpu does, and which i915 sometimes also does, and probably always should, but that's kinda a debate). Also for stuff like HMM we really need to be able to do this, or things get real dicey. Consequence is that any critical path necessary to get to a dma_fence_signal for a fence must never a) call dma_resv_lock nor b) allocate memory with GFP_KERNEL. Also by implication of dma_resv_lock(), no userspace faulting allowed. That's some supremely obnoxious limitations, which is why we need to sprinkle the right annotations to all relevant paths. The one big locking context we're leaving out here is mmu notifiers, added in commit 23b68395c7c78a764e8963fc15a7cfd318bf187f Author: Daniel Vetter Date: Mon Aug 26 22:14:21 2019 +0200 mm/mmu_notifiers: add a lockdep map for invalidate_range_start/end that one covers a lot of other callsites, and it's also allowed to wait on dma-fences from mmu notifiers. But there's no ready-made functions exposed to prime this, so I've left it out for now. v2: Also track against mmu notifier context. v3: kerneldoc to spec the cross-driver contract. Note that currently i915 throws in a hard-coded 10s timeout on foreign fences (not sure why that was done, but it's there), which is why that rule is worded with SHOULD instead of MUST. Also some of the mmu_notifier/shrinker rules might surprise SoC drivers, I haven't fully audited them all. Which is infeasible anyway, we'll need to run them with lockdep and dma-fence annotations and see what goes boom. v4: A spelling fix from Mika v5: #ifdef for CONFIG_MMU_NOTIFIER. Reported by 0day. Unfortunately this means lockdep enforcement is slightly inconsistent, it won't spot GFP_NOIO and GFP_NOFS allocations in the wrong spot if CONFIG_MMU_NOTIFIER is disabled in the kernel config. Oh well. v5: Note that only drivers/gpu has a reasonable (or at least historical) excuse to use dma_fence_wait() from shrinker and mmu notifier callbacks. Everyone else should either have a better memory manager model, or better hardware. This reflects discussions with Jason Gunthorpe. Cc: Jason Gunthorpe Cc: Felix Kuehling Cc: kernel test robot Acked-by: Christian König Acked-by: Dave Airlie Reviewed-by: Maarten Lankhorst Reviewed-by: Thomas Hellström (v4) Cc: Mika Kuoppala Cc: Thomas Hellstrom Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Cc: linux-rdma@vger.kernel.org Cc: amd-gfx@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: Chris Wilson Cc: Maarten Lankhorst Cc: Christian König Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20200707201229.472834-3-daniel.vetter@ffwll.ch --- Documentation/driver-api/dma-buf.rst | 6 +++++ drivers/dma-buf/dma-fence.c | 46 ++++++++++++++++++++++++++++++++++++ drivers/dma-buf/dma-resv.c | 8 +++++++ include/linux/dma-fence.h | 1 + 4 files changed, 61 insertions(+) (limited to 'Documentation') diff --git a/Documentation/driver-api/dma-buf.rst b/Documentation/driver-api/dma-buf.rst index 05d856131140..f8f6decde359 100644 --- a/Documentation/driver-api/dma-buf.rst +++ b/Documentation/driver-api/dma-buf.rst @@ -133,6 +133,12 @@ DMA Fences .. kernel-doc:: drivers/dma-buf/dma-fence.c :doc: DMA fences overview +DMA Fence Cross-Driver Contract +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/dma-buf/dma-fence.c + :doc: fence cross-driver contract + DMA Fence Signalling Annotations ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/drivers/dma-buf/dma-fence.c b/drivers/dma-buf/dma-fence.c index 0005bc002529..af1d8ea926b3 100644 --- a/drivers/dma-buf/dma-fence.c +++ b/drivers/dma-buf/dma-fence.c @@ -64,6 +64,52 @@ static atomic64_t dma_fence_context_counter = ATOMIC64_INIT(1); * &dma_buf.resv pointer. */ +/** + * DOC: fence cross-driver contract + * + * Since &dma_fence provide a cross driver contract, all drivers must follow the + * same rules: + * + * * Fences must complete in a reasonable time. Fences which represent kernels + * and shaders submitted by userspace, which could run forever, must be backed + * up by timeout and gpu hang recovery code. Minimally that code must prevent + * further command submission and force complete all in-flight fences, e.g. + * when the driver or hardware do not support gpu reset, or if the gpu reset + * failed for some reason. Ideally the driver supports gpu recovery which only + * affects the offending userspace context, and no other userspace + * submissions. + * + * * Drivers may have different ideas of what completion within a reasonable + * time means. Some hang recovery code uses a fixed timeout, others a mix + * between observing forward progress and increasingly strict timeouts. + * Drivers should not try to second guess timeout handling of fences from + * other drivers. + * + * * To ensure there's no deadlocks of dma_fence_wait() against other locks + * drivers should annotate all code required to reach dma_fence_signal(), + * which completes the fences, with dma_fence_begin_signalling() and + * dma_fence_end_signalling(). + * + * * Drivers are allowed to call dma_fence_wait() while holding dma_resv_lock(). + * This means any code required for fence completion cannot acquire a + * &dma_resv lock. Note that this also pulls in the entire established + * locking hierarchy around dma_resv_lock() and dma_resv_unlock(). + * + * * Drivers are allowed to call dma_fence_wait() from their &shrinker + * callbacks. This means any code required for fence completion cannot + * allocate memory with GFP_KERNEL. + * + * * Drivers are allowed to call dma_fence_wait() from their &mmu_notifier + * respectively &mmu_interval_notifier callbacks. This means any code required + * for fence completeion cannot allocate memory with GFP_NOFS or GFP_NOIO. + * Only GFP_ATOMIC is permissible, which might fail. + * + * Note that only GPU drivers have a reasonable excuse for both requiring + * &mmu_interval_notifier and &shrinker callbacks at the same time as having to + * track asynchronous compute work using &dma_fence. No driver outside of + * drivers/gpu should ever call dma_fence_wait() in such contexts. + */ + static const char *dma_fence_stub_get_name(struct dma_fence *fence) { return "stub"; diff --git a/drivers/dma-buf/dma-resv.c b/drivers/dma-buf/dma-resv.c index b45f8514dc82..07f5273207e7 100644 --- a/drivers/dma-buf/dma-resv.c +++ b/drivers/dma-buf/dma-resv.c @@ -36,6 +36,7 @@ #include #include #include +#include /** * DOC: Reservation Object Overview @@ -116,6 +117,13 @@ static int __init dma_resv_lockdep(void) if (ret == -EDEADLK) dma_resv_lock_slow(&obj, &ctx); fs_reclaim_acquire(GFP_KERNEL); +#ifdef CONFIG_MMU_NOTIFIER + lock_map_acquire(&__mmu_notifier_invalidate_range_start_map); + __dma_fence_might_wait(); + lock_map_release(&__mmu_notifier_invalidate_range_start_map); +#else + __dma_fence_might_wait(); +#endif fs_reclaim_release(GFP_KERNEL); ww_mutex_unlock(&obj.lock); ww_acquire_fini(&ctx); diff --git a/include/linux/dma-fence.h b/include/linux/dma-fence.h index 3f288f7db2ef..09e23adb351d 100644 --- a/include/linux/dma-fence.h +++ b/include/linux/dma-fence.h @@ -360,6 +360,7 @@ dma_fence_get_rcu_safe(struct dma_fence __rcu **fencep) #ifdef CONFIG_LOCKDEP bool dma_fence_begin_signalling(void); void dma_fence_end_signalling(bool cookie); +void __dma_fence_might_wait(void); #else static inline bool dma_fence_begin_signalling(void) { -- cgit v1.2.3 From 72b6ede7362327c0cff8e159fbb8c8fd9611e26e Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 9 Jul 2020 14:33:38 +0200 Subject: dma-buf.rst: Document why indefinite fences are a bad idea Comes up every few years, gets somewhat tedious to discuss, let's write this down once and for all. What I'm not sure about is whether the text should be more explicit in flat out mandating the amdkfd eviction fences for long running compute workloads or workloads where userspace fencing is allowed. v2: Now with dot graph! v3: Typo (Dave Airlie) Reviewed-by: Thomas Hellstrom Acked-by: Jason Ekstrand Acked-by: Christian König Acked-by: Daniel Stone Acked-by: Dave Airlie Reviewed-by: Maarten Lankhorst Cc: Jesse Natalie Cc: Steve Pronovost Cc: Jason Ekstrand Cc: Felix Kuehling Cc: Mika Kuoppala Cc: Thomas Hellstrom Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Cc: linux-rdma@vger.kernel.org Cc: amd-gfx@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: Chris Wilson Cc: Maarten Lankhorst Cc: Christian König Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20200709123339.547390-1-daniel.vetter@ffwll.ch --- Documentation/driver-api/dma-buf.rst | 70 ++++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) (limited to 'Documentation') diff --git a/Documentation/driver-api/dma-buf.rst b/Documentation/driver-api/dma-buf.rst index f8f6decde359..100bfd227265 100644 --- a/Documentation/driver-api/dma-buf.rst +++ b/Documentation/driver-api/dma-buf.rst @@ -178,3 +178,73 @@ DMA Fence uABI/Sync File .. kernel-doc:: include/linux/sync_file.h :internal: +Indefinite DMA Fences +~~~~~~~~~~~~~~~~~~~~ + +At various times &dma_fence with an indefinite time until dma_fence_wait() +finishes have been proposed. Examples include: + +* Future fences, used in HWC1 to signal when a buffer isn't used by the display + any longer, and created with the screen update that makes the buffer visible. + The time this fence completes is entirely under userspace's control. + +* Proxy fences, proposed to handle &drm_syncobj for which the fence has not yet + been set. Used to asynchronously delay command submission. + +* Userspace fences or gpu futexes, fine-grained locking within a command buffer + that userspace uses for synchronization across engines or with the CPU, which + are then imported as a DMA fence for integration into existing winsys + protocols. + +* Long-running compute command buffers, while still using traditional end of + batch DMA fences for memory management instead of context preemption DMA + fences which get reattached when the compute job is rescheduled. + +Common to all these schemes is that userspace controls the dependencies of these +fences and controls when they fire. Mixing indefinite fences with normal +in-kernel DMA fences does not work, even when a fallback timeout is included to +protect against malicious userspace: + +* Only the kernel knows about all DMA fence dependencies, userspace is not aware + of dependencies injected due to memory management or scheduler decisions. + +* Only userspace knows about all dependencies in indefinite fences and when + exactly they will complete, the kernel has no visibility. + +Furthermore the kernel has to be able to hold up userspace command submission +for memory management needs, which means we must support indefinite fences being +dependent upon DMA fences. If the kernel also support indefinite fences in the +kernel like a DMA fence, like any of the above proposal would, there is the +potential for deadlocks. + +.. kernel-render:: DOT + :alt: Indefinite Fencing Dependency Cycle + :caption: Indefinite Fencing Dependency Cycle + + digraph "Fencing Cycle" { + node [shape=box bgcolor=grey style=filled] + kernel [label="Kernel DMA Fences"] + userspace [label="userspace controlled fences"] + kernel -> userspace [label="memory management"] + userspace -> kernel [label="Future fence, fence proxy, ..."] + + { rank=same; kernel userspace } + } + +This means that the kernel might accidentally create deadlocks +through memory management dependencies which userspace is unaware of, which +randomly hangs workloads until the timeout kicks in. Workloads, which from +userspace's perspective, do not contain a deadlock. In such a mixed fencing +architecture there is no single entity with knowledge of all dependencies. +Thefore preventing such deadlocks from within the kernel is not possible. + +The only solution to avoid dependencies loops is by not allowing indefinite +fences in the kernel. This means: + +* No future fences, proxy fences or userspace fences imported as DMA fences, + with or without a timeout. + +* No DMA fences that signal end of batchbuffer for command submission where + userspace is allowed to use userspace fencing or long running compute + workloads. This also means no implicit fencing for shared buffers in these + cases. -- cgit v1.2.3 From 724884c3eba36a941a25505aa92dc5b136140233 Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Fri, 3 Jul 2020 13:47:16 +0200 Subject: dt-bindings: display: Fix example in nwl-dsi.yaml The example is now validated against rocktech,jh057n00900 schema that was ported to yaml, and didn't validate with: - '#address-cells', '#size-cells', 'port@0' do not match any of the regexes: 'pinctrl-[0-9]+' - 'vcc-supply' is a required property - 'iovcc-supply' is a required property - 'reset-gpios' is a required property Fix it. Reviewed-by: Rob Herring Reviewed-by: Guido Günther Signed-off-by: Ondrej Jirman Signed-off-by: Rob Herring Link: https://patchwork.freedesktop.org/patch/msgid/20200703114717.2140832-2-megous@megous.com --- Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml index 8aff2d68fc33..2c4c34e3bc29 100644 --- a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml @@ -165,6 +165,7 @@ examples: - | #include + #include #include #include @@ -191,12 +192,12 @@ examples: phy-names = "dphy"; panel@0 { - #address-cells = <1>; - #size-cells = <0>; compatible = "rocktech,jh057n00900"; reg = <0>; - port@0 { - reg = <0>; + vcc-supply = <®_2v8_p>; + iovcc-supply = <®_1v8_p>; + reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + port { panel_in: endpoint { remote-endpoint = <&mipi_dsi_out>; }; -- cgit v1.2.3 From acc0c39a59ccd8161b9066265fb8798b4ee07dc9 Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Fri, 3 Jul 2020 13:47:17 +0200 Subject: dt-binding: display: Allow a single port node on rocktech, jh057n00900 The display has one port. Allow it in the binding. Reviewed-by: Rob Herring Reviewed-by: Guido Günther Signed-off-by: Ondrej Jirman Signed-off-by: Rob Herring Link: https://patchwork.freedesktop.org/patch/msgid/20200703114717.2140832-3-megous@megous.com --- .../devicetree/bindings/display/panel/rocktech,jh057n00900.yaml | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml index a6985cd947fb..d5733ef30954 100644 --- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml @@ -24,6 +24,7 @@ properties: # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel - xingbangda,xbd599 + port: true reg: maxItems: 1 description: DSI virtual channel -- cgit v1.2.3 From 369c4ef4330f395835f63fe62e4110f4608c9459 Mon Sep 17 00:00:00 2001 From: Sharat Masetty Date: Mon, 13 Jul 2020 18:11:41 +0530 Subject: dt-bindings: drm/msm/gpu: Document gpu opp table Update documentation to list the gpu opp table bindings including the newly added "opp-peak-kBps" needed for GPU-DDR bandwidth scaling. Signed-off-by: Sharat Masetty Acked-by: Rob Herring Signed-off-by: Akhil P Oommen Signed-off-by: Rob Clark --- .../devicetree/bindings/display/msm/gpu.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt index fd779cd6994d..1af0ff102b50 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.txt +++ b/Documentation/devicetree/bindings/display/msm/gpu.txt @@ -112,6 +112,34 @@ Example a6xx (with GMU): interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>; interconnect-names = "gfx-mem"; + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + opp-level = ; + opp-peak-kBps = <5412000>; + }; + + opp-355000000 { + opp-hz = /bits/ 64 <355000000>; + opp-level = ; + opp-peak-kBps = <3072000>; + }; + + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-level = ; + opp-peak-kBps = <3072000>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + opp-level = ; + opp-peak-kBps = <1804000>; + }; + }; + qcom,gmu = <&gmu>; zap-shader { -- cgit v1.2.3 From 694dd304cc294b69db7191cec1d83e5a29c6a4b0 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sun, 26 Jul 2020 13:12:01 +0200 Subject: drm/msm/dsi: Add phy configuration for SDM630/636/660 These SoCs make use of the 14nm phy, but at different addresses than other 14nm units. Signed-off-by: Konrad Dybcio Signed-off-by: Rob Clark --- Documentation/devicetree/bindings/display/msm/dsi.txt | 1 + drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 ++ drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 1 + drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 18 ++++++++++++++++++ 4 files changed, 22 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt index af95586c898f..7884fd7a85c1 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi.txt +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt @@ -87,6 +87,7 @@ Required properties: * "qcom,dsi-phy-20nm" * "qcom,dsi-phy-28nm-8960" * "qcom,dsi-phy-14nm" + * "qcom,dsi-phy-14nm-660" * "qcom,dsi-phy-10nm" * "qcom,dsi-phy-10nm-8998" - reg: Physical base address and length of the registers of PLL, PHY. Some diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c index f509ebd77500..009f5b843dd1 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c @@ -499,6 +499,8 @@ static const struct of_device_id dsi_phy_dt_match[] = { #ifdef CONFIG_DRM_MSM_DSI_14NM_PHY { .compatible = "qcom,dsi-phy-14nm", .data = &dsi_phy_14nm_cfgs }, + { .compatible = "qcom,dsi-phy-14nm-660", + .data = &dsi_phy_14nm_660_cfgs }, #endif #ifdef CONFIG_DRM_MSM_DSI_10NM_PHY { .compatible = "qcom,dsi-phy-10nm", diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h index 24b294ed3059..ef8672d7b123 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h @@ -45,6 +45,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs; extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs; extern const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs; extern const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs; +extern const struct msm_dsi_phy_cfg dsi_phy_14nm_660_cfgs; extern const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs; extern const struct msm_dsi_phy_cfg dsi_phy_10nm_8998_cfgs; diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c index 1594f1422372..519400501bcd 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c @@ -161,3 +161,21 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs = { .io_start = { 0x994400, 0x996400 }, .num_dsi_phy = 2, }; + +const struct msm_dsi_phy_cfg dsi_phy_14nm_660_cfgs = { + .type = MSM_DSI_PHY_14NM, + .src_pll_truthtable = { {false, false}, {true, false} }, + .reg_cfg = { + .num = 1, + .regs = { + {"vcca", 17000, 32}, + }, + }, + .ops = { + .enable = dsi_14nm_phy_enable, + .disable = dsi_14nm_phy_disable, + .init = dsi_14nm_phy_init, + }, + .io_start = { 0xc994400, 0xc996000 }, + .num_dsi_phy = 2, +}; -- cgit v1.2.3