From bb351abaf5cd4f9237e1b3094d9cc04853de6d95 Mon Sep 17 00:00:00 2001 From: Weiping Zhang Date: Wed, 26 Dec 2018 11:56:33 +0800 Subject: block: add documentation for io_timeout Add documentation for /sys/block//queue/io_timeout. Reviewed-by: Bart Van Assche Signed-off-by: Weiping Zhang Signed-off-by: Jens Axboe --- Documentation/ABI/testing/sysfs-block | 9 +++++++++ Documentation/block/queue-sysfs.txt | 7 +++++++ 2 files changed, 16 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block index 7710d4022b19..dfad7427817c 100644 --- a/Documentation/ABI/testing/sysfs-block +++ b/Documentation/ABI/testing/sysfs-block @@ -279,3 +279,12 @@ Description: size in 512B sectors of the zones of the device, with the eventual exception of the last zone of the device which may be smaller. + +What: /sys/block//queue/io_timeout +Date: November 2018 +Contact: Weiping Zhang +Description: + io_timeout is the request timeout in milliseconds. If a request + does not complete in this time then the block driver timeout + handler is invoked. That timeout handler can decide to retry + the request, to fail it or to start a device recovery strategy. diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt index 39e286d7afc9..83b457e24bba 100644 --- a/Documentation/block/queue-sysfs.txt +++ b/Documentation/block/queue-sysfs.txt @@ -67,6 +67,13 @@ If set to a value larger than 0, the kernel will put the process issuing IO to sleep for this amount of microseconds before entering classic polling. +io_timeout (RW) +--------------- +io_timeout is the request timeout in milliseconds. If a request does not +complete in this time then the block driver timeout handler is invoked. +That timeout handler can decide to retry the request, to fail it or to start +a device recovery strategy. + iostats (RW) ------------- This file is used to control (on/off) the iostats accounting of the -- cgit v1.2.3 From 373282e7ab6840cd583a223fa90628f2d8293c26 Mon Sep 17 00:00:00 2001 From: John Pittman Date: Fri, 4 Jan 2019 12:06:37 -0500 Subject: null_blk: add zoned config support information If the kernel is built without CONFIG_BLK_DEV_ZONED, a modprobe of the null_blk driver with zoned=1 fails with 'Invalid argument'. This can be confusing to users, prompting a search as to why the parameter is invalid. To assist in that search, add a bit more information to the failure, additionally adding to the documentation that CONFIG_BLK_DEV_ZONED is needed for zoned=1. Reviewed-by: Bart Van Assche Signed-off-by: John Pittman Added null_blk prefix to error message. Signed-off-by: Jens Axboe --- Documentation/block/null_blk.txt | 3 ++- drivers/block/null_blk.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/block/null_blk.txt b/Documentation/block/null_blk.txt index ea2dafe49ae8..4cad1024fff7 100644 --- a/Documentation/block/null_blk.txt +++ b/Documentation/block/null_blk.txt @@ -88,7 +88,8 @@ shared_tags=[0/1]: Default: 0 zoned=[0/1]: Default: 0 0: Block device is exposed as a random-access block device. - 1: Block device is exposed as a host-managed zoned block device. + 1: Block device is exposed as a host-managed zoned block device. Requires + CONFIG_BLK_DEV_ZONED. zone_size=[MB]: Default: 256 Per zone size when exposed as a zoned block device. Must be a power of two. diff --git a/drivers/block/null_blk.h b/drivers/block/null_blk.h index b3df2793e7cd..34b22d6523ba 100644 --- a/drivers/block/null_blk.h +++ b/drivers/block/null_blk.h @@ -97,6 +97,7 @@ void null_zone_reset(struct nullb_cmd *cmd, sector_t sector); #else static inline int null_zone_init(struct nullb_device *dev) { + pr_err("null_blk: CONFIG_BLK_DEV_ZONED not enabled\n"); return -EINVAL; } static inline void null_zone_exit(struct nullb_device *dev) {} -- cgit v1.2.3 From 8a5aaf97cc4876a9b61cb3b7c07128d4569ac536 Mon Sep 17 00:00:00 2001 From: Guo Ren Date: Fri, 4 Jan 2019 11:17:33 +0800 Subject: Documentation/features: Add csky kernel features core/ cBPF-JIT : TODO | core/ eBPF-JIT : TODO | core/ generic-idle-thread : ok | core/ jump-labels : TODO | core/ tracehook : ok | debug/ KASAN : TODO | debug/ gcov-profile-all : TODO | debug/ kgdb : TODO | debug/ kprobes-on-ftrace : TODO | debug/ kprobes : TODO | debug/ kretprobes : TODO | debug/ optprobes : TODO | debug/ stackprotector : TODO | debug/ uprobes : TODO | debug/ user-ret-profiler : TODO | io/ dma-contiguous : ok | locking/ cmpxchg-local : TODO | locking/ lockdep : TODO | locking/ queued-rwlocks : ok | locking/ queued-spinlocks : TODO | locking/ rwsem-optimized : TODO | perf/ kprobes-event : TODO | perf/ perf-regs : TODO | perf/ perf-stackdump : TODO | sched/ membarrier-sync-core : TODO | sched/ numa-balancing : .. | seccomp/ seccomp-filter : TODO | time/ arch-tick-broadcast : TODO | time/ clockevents : ok | time/ context-tracking : TODO | time/ irq-time-acct : TODO | time/ modern-timekeeping : ok | time/ virt-cpuacct : TODO | vm/ ELF-ASLR : TODO | vm/ PG_uncached : TODO | vm/ THP : .. | vm/ batch-unmap-tlb-flush: TODO | vm/ huge-vmap : TODO | vm/ ioremap_prot : TODO | vm/ numa-memblock : .. | vm/ pte_special : TODO | Signed-off-by: Guo Ren Cc: Arnd Bergmann --- Documentation/features/core/cBPF-JIT/arch-support.txt | 1 + Documentation/features/core/eBPF-JIT/arch-support.txt | 1 + Documentation/features/core/generic-idle-thread/arch-support.txt | 1 + Documentation/features/core/jump-labels/arch-support.txt | 1 + Documentation/features/core/tracehook/arch-support.txt | 1 + Documentation/features/debug/KASAN/arch-support.txt | 1 + Documentation/features/debug/gcov-profile-all/arch-support.txt | 1 + Documentation/features/debug/kgdb/arch-support.txt | 1 + Documentation/features/debug/kprobes-on-ftrace/arch-support.txt | 1 + Documentation/features/debug/kprobes/arch-support.txt | 1 + Documentation/features/debug/kretprobes/arch-support.txt | 1 + Documentation/features/debug/optprobes/arch-support.txt | 1 + Documentation/features/debug/stackprotector/arch-support.txt | 1 + Documentation/features/debug/uprobes/arch-support.txt | 1 + Documentation/features/debug/user-ret-profiler/arch-support.txt | 1 + Documentation/features/io/dma-contiguous/arch-support.txt | 1 + Documentation/features/locking/cmpxchg-local/arch-support.txt | 1 + Documentation/features/locking/lockdep/arch-support.txt | 1 + Documentation/features/locking/queued-rwlocks/arch-support.txt | 1 + Documentation/features/locking/queued-spinlocks/arch-support.txt | 1 + Documentation/features/locking/rwsem-optimized/arch-support.txt | 1 + Documentation/features/perf/kprobes-event/arch-support.txt | 1 + Documentation/features/perf/perf-regs/arch-support.txt | 1 + Documentation/features/perf/perf-stackdump/arch-support.txt | 1 + Documentation/features/sched/membarrier-sync-core/arch-support.txt | 1 + Documentation/features/sched/numa-balancing/arch-support.txt | 1 + Documentation/features/seccomp/seccomp-filter/arch-support.txt | 1 + Documentation/features/time/arch-tick-broadcast/arch-support.txt | 1 + Documentation/features/time/clockevents/arch-support.txt | 1 + Documentation/features/time/context-tracking/arch-support.txt | 1 + Documentation/features/time/irq-time-acct/arch-support.txt | 1 + Documentation/features/time/modern-timekeeping/arch-support.txt | 1 + Documentation/features/time/virt-cpuacct/arch-support.txt | 1 + Documentation/features/vm/ELF-ASLR/arch-support.txt | 1 + Documentation/features/vm/PG_uncached/arch-support.txt | 1 + Documentation/features/vm/THP/arch-support.txt | 1 + Documentation/features/vm/TLB/arch-support.txt | 1 + Documentation/features/vm/huge-vmap/arch-support.txt | 1 + Documentation/features/vm/ioremap_prot/arch-support.txt | 1 + Documentation/features/vm/numa-memblock/arch-support.txt | 1 + Documentation/features/vm/pte_special/arch-support.txt | 1 + 41 files changed, 41 insertions(+) (limited to 'Documentation') diff --git a/Documentation/features/core/cBPF-JIT/arch-support.txt b/Documentation/features/core/cBPF-JIT/arch-support.txt index 90459cdde314..8620c38d4db0 100644 --- a/Documentation/features/core/cBPF-JIT/arch-support.txt +++ b/Documentation/features/core/cBPF-JIT/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | TODO | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/core/eBPF-JIT/arch-support.txt b/Documentation/features/core/eBPF-JIT/arch-support.txt index c90a0382fe66..9ae6e8d0d10d 100644 --- a/Documentation/features/core/eBPF-JIT/arch-support.txt +++ b/Documentation/features/core/eBPF-JIT/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/core/generic-idle-thread/arch-support.txt b/Documentation/features/core/generic-idle-thread/arch-support.txt index 0ef6acdb991c..365df2c2ff0b 100644 --- a/Documentation/features/core/generic-idle-thread/arch-support.txt +++ b/Documentation/features/core/generic-idle-thread/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | ok | | h8300: | TODO | | hexagon: | ok | | ia64: | ok | diff --git a/Documentation/features/core/jump-labels/arch-support.txt b/Documentation/features/core/jump-labels/arch-support.txt index 60111395f932..7fc2e243dee9 100644 --- a/Documentation/features/core/jump-labels/arch-support.txt +++ b/Documentation/features/core/jump-labels/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/core/tracehook/arch-support.txt b/Documentation/features/core/tracehook/arch-support.txt index f44c274e40ed..d344b99aae1e 100644 --- a/Documentation/features/core/tracehook/arch-support.txt +++ b/Documentation/features/core/tracehook/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | ok | + | csky: | ok | | h8300: | TODO | | hexagon: | ok | | ia64: | ok | diff --git a/Documentation/features/debug/KASAN/arch-support.txt b/Documentation/features/debug/KASAN/arch-support.txt index 282ecc8ea1da..304dcd461795 100644 --- a/Documentation/features/debug/KASAN/arch-support.txt +++ b/Documentation/features/debug/KASAN/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/debug/gcov-profile-all/arch-support.txt b/Documentation/features/debug/gcov-profile-all/arch-support.txt index 01b2b3004e0a..059d58a549c7 100644 --- a/Documentation/features/debug/gcov-profile-all/arch-support.txt +++ b/Documentation/features/debug/gcov-profile-all/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/debug/kgdb/arch-support.txt b/Documentation/features/debug/kgdb/arch-support.txt index 3b4dff22329f..3e6b8f07d5d0 100644 --- a/Documentation/features/debug/kgdb/arch-support.txt +++ b/Documentation/features/debug/kgdb/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | ok | | hexagon: | ok | | ia64: | TODO | diff --git a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt index 7e963d0ae646..68f266944d5f 100644 --- a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt +++ b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | TODO | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/debug/kprobes/arch-support.txt b/Documentation/features/debug/kprobes/arch-support.txt index 4ada027faf16..f4e45bd58fea 100644 --- a/Documentation/features/debug/kprobes/arch-support.txt +++ b/Documentation/features/debug/kprobes/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | diff --git a/Documentation/features/debug/kretprobes/arch-support.txt b/Documentation/features/debug/kretprobes/arch-support.txt index 044e13fcca5d..1d5651ef11f8 100644 --- a/Documentation/features/debug/kretprobes/arch-support.txt +++ b/Documentation/features/debug/kretprobes/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | diff --git a/Documentation/features/debug/optprobes/arch-support.txt b/Documentation/features/debug/optprobes/arch-support.txt index dce7669c918f..fb297a88f62c 100644 --- a/Documentation/features/debug/optprobes/arch-support.txt +++ b/Documentation/features/debug/optprobes/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | TODO | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/debug/stackprotector/arch-support.txt b/Documentation/features/debug/stackprotector/arch-support.txt index 954ac1c95553..9999ea521f3e 100644 --- a/Documentation/features/debug/stackprotector/arch-support.txt +++ b/Documentation/features/debug/stackprotector/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/debug/uprobes/arch-support.txt b/Documentation/features/debug/uprobes/arch-support.txt index 1a3f9d3229bf..1c577d0cfc7f 100644 --- a/Documentation/features/debug/uprobes/arch-support.txt +++ b/Documentation/features/debug/uprobes/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/debug/user-ret-profiler/arch-support.txt b/Documentation/features/debug/user-ret-profiler/arch-support.txt index 1d78d1069a5f..6bfa36b0e017 100644 --- a/Documentation/features/debug/user-ret-profiler/arch-support.txt +++ b/Documentation/features/debug/user-ret-profiler/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | TODO | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/io/dma-contiguous/arch-support.txt b/Documentation/features/io/dma-contiguous/arch-support.txt index 30c072d2b67c..eb28b5c97ca6 100644 --- a/Documentation/features/io/dma-contiguous/arch-support.txt +++ b/Documentation/features/io/dma-contiguous/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | ok | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/locking/cmpxchg-local/arch-support.txt b/Documentation/features/locking/cmpxchg-local/arch-support.txt index 51704a2dc8d1..242ff5a6586e 100644 --- a/Documentation/features/locking/cmpxchg-local/arch-support.txt +++ b/Documentation/features/locking/cmpxchg-local/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/locking/lockdep/arch-support.txt b/Documentation/features/locking/lockdep/arch-support.txt index bd39c5edd460..941fd5b1094d 100644 --- a/Documentation/features/locking/lockdep/arch-support.txt +++ b/Documentation/features/locking/lockdep/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | ok | | ia64: | TODO | diff --git a/Documentation/features/locking/queued-rwlocks/arch-support.txt b/Documentation/features/locking/queued-rwlocks/arch-support.txt index da7aff3bee0b..c683da198f31 100644 --- a/Documentation/features/locking/queued-rwlocks/arch-support.txt +++ b/Documentation/features/locking/queued-rwlocks/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | ok | | c6x: | TODO | + | csky: | ok | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/locking/queued-spinlocks/arch-support.txt b/Documentation/features/locking/queued-spinlocks/arch-support.txt index 478e9101322c..e3080b82aefd 100644 --- a/Documentation/features/locking/queued-spinlocks/arch-support.txt +++ b/Documentation/features/locking/queued-spinlocks/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | TODO | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/locking/rwsem-optimized/arch-support.txt b/Documentation/features/locking/rwsem-optimized/arch-support.txt index e54b1f1a8091..7521d7500fbe 100644 --- a/Documentation/features/locking/rwsem-optimized/arch-support.txt +++ b/Documentation/features/locking/rwsem-optimized/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | diff --git a/Documentation/features/perf/kprobes-event/arch-support.txt b/Documentation/features/perf/kprobes-event/arch-support.txt index 7331402d1887..d8278bf62b85 100644 --- a/Documentation/features/perf/kprobes-event/arch-support.txt +++ b/Documentation/features/perf/kprobes-event/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | ok | | ia64: | TODO | diff --git a/Documentation/features/perf/perf-regs/arch-support.txt b/Documentation/features/perf/perf-regs/arch-support.txt index 53feeee6cdad..687d049d9cee 100644 --- a/Documentation/features/perf/perf-regs/arch-support.txt +++ b/Documentation/features/perf/perf-regs/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/perf/perf-stackdump/arch-support.txt b/Documentation/features/perf/perf-stackdump/arch-support.txt index 16164348e0ea..90996e3d18a8 100644 --- a/Documentation/features/perf/perf-stackdump/arch-support.txt +++ b/Documentation/features/perf/perf-stackdump/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/sched/membarrier-sync-core/arch-support.txt b/Documentation/features/sched/membarrier-sync-core/arch-support.txt index c7858dd1ea8f..8a521a622966 100644 --- a/Documentation/features/sched/membarrier-sync-core/arch-support.txt +++ b/Documentation/features/sched/membarrier-sync-core/arch-support.txt @@ -34,6 +34,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/sched/numa-balancing/arch-support.txt b/Documentation/features/sched/numa-balancing/arch-support.txt index c68bb2c2cb62..350823692f28 100644 --- a/Documentation/features/sched/numa-balancing/arch-support.txt +++ b/Documentation/features/sched/numa-balancing/arch-support.txt @@ -11,6 +11,7 @@ | arm: | .. | | arm64: | ok | | c6x: | .. | + | csky: | .. | | h8300: | .. | | hexagon: | .. | | ia64: | TODO | diff --git a/Documentation/features/seccomp/seccomp-filter/arch-support.txt b/Documentation/features/seccomp/seccomp-filter/arch-support.txt index d4271b493b41..4fe6c3c3be5c 100644 --- a/Documentation/features/seccomp/seccomp-filter/arch-support.txt +++ b/Documentation/features/seccomp/seccomp-filter/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/time/arch-tick-broadcast/arch-support.txt b/Documentation/features/time/arch-tick-broadcast/arch-support.txt index 83d9e68462bb..593536f7925b 100644 --- a/Documentation/features/time/arch-tick-broadcast/arch-support.txt +++ b/Documentation/features/time/arch-tick-broadcast/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/time/clockevents/arch-support.txt b/Documentation/features/time/clockevents/arch-support.txt index 3d4908fce6da..7a27157da408 100644 --- a/Documentation/features/time/clockevents/arch-support.txt +++ b/Documentation/features/time/clockevents/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | ok | + | csky: | ok | | h8300: | ok | | hexagon: | ok | | ia64: | TODO | diff --git a/Documentation/features/time/context-tracking/arch-support.txt b/Documentation/features/time/context-tracking/arch-support.txt index c29974afffaa..048bfb6d3872 100644 --- a/Documentation/features/time/context-tracking/arch-support.txt +++ b/Documentation/features/time/context-tracking/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/time/irq-time-acct/arch-support.txt b/Documentation/features/time/irq-time-acct/arch-support.txt index 8d73c463ec27..a14bbad8e948 100644 --- a/Documentation/features/time/irq-time-acct/arch-support.txt +++ b/Documentation/features/time/irq-time-acct/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | .. | diff --git a/Documentation/features/time/modern-timekeeping/arch-support.txt b/Documentation/features/time/modern-timekeeping/arch-support.txt index e7c6ea6b8fb3..2855dfe2464d 100644 --- a/Documentation/features/time/modern-timekeeping/arch-support.txt +++ b/Documentation/features/time/modern-timekeeping/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | ok | | c6x: | ok | + | csky: | ok | | h8300: | ok | | hexagon: | ok | | ia64: | ok | diff --git a/Documentation/features/time/virt-cpuacct/arch-support.txt b/Documentation/features/time/virt-cpuacct/arch-support.txt index 4646457461cf..fb0d0cab9cab 100644 --- a/Documentation/features/time/virt-cpuacct/arch-support.txt +++ b/Documentation/features/time/virt-cpuacct/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | diff --git a/Documentation/features/vm/ELF-ASLR/arch-support.txt b/Documentation/features/vm/ELF-ASLR/arch-support.txt index 1f71d090ff2c..adc25878d217 100644 --- a/Documentation/features/vm/ELF-ASLR/arch-support.txt +++ b/Documentation/features/vm/ELF-ASLR/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/vm/PG_uncached/arch-support.txt b/Documentation/features/vm/PG_uncached/arch-support.txt index fbd5aa463b0a..f05588f9e4b4 100644 --- a/Documentation/features/vm/PG_uncached/arch-support.txt +++ b/Documentation/features/vm/PG_uncached/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | TODO | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | diff --git a/Documentation/features/vm/THP/arch-support.txt b/Documentation/features/vm/THP/arch-support.txt index 5d7ecc378f29..cdfe8925f881 100644 --- a/Documentation/features/vm/THP/arch-support.txt +++ b/Documentation/features/vm/THP/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | .. | + | csky: | .. | | h8300: | .. | | hexagon: | .. | | ia64: | TODO | diff --git a/Documentation/features/vm/TLB/arch-support.txt b/Documentation/features/vm/TLB/arch-support.txt index f7af9678eb66..2bdd3b6cee3c 100644 --- a/Documentation/features/vm/TLB/arch-support.txt +++ b/Documentation/features/vm/TLB/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | TODO | | c6x: | .. | + | csky: | TODO | | h8300: | .. | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/vm/huge-vmap/arch-support.txt b/Documentation/features/vm/huge-vmap/arch-support.txt index d0713ccc7117..019131c5acce 100644 --- a/Documentation/features/vm/huge-vmap/arch-support.txt +++ b/Documentation/features/vm/huge-vmap/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/vm/ioremap_prot/arch-support.txt b/Documentation/features/vm/ioremap_prot/arch-support.txt index 326e4797bc65..3a6b87de6a19 100644 --- a/Documentation/features/vm/ioremap_prot/arch-support.txt +++ b/Documentation/features/vm/ioremap_prot/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | TODO | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/vm/numa-memblock/arch-support.txt b/Documentation/features/vm/numa-memblock/arch-support.txt index 1a988052cd24..3004beb0fd71 100644 --- a/Documentation/features/vm/numa-memblock/arch-support.txt +++ b/Documentation/features/vm/numa-memblock/arch-support.txt @@ -11,6 +11,7 @@ | arm: | .. | | arm64: | ok | | c6x: | .. | + | csky: | .. | | h8300: | .. | | hexagon: | .. | | ia64: | ok | diff --git a/Documentation/features/vm/pte_special/arch-support.txt b/Documentation/features/vm/pte_special/arch-support.txt index a8378424bc98..2dc5df6a1cf5 100644 --- a/Documentation/features/vm/pte_special/arch-support.txt +++ b/Documentation/features/vm/pte_special/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | -- cgit v1.2.3 From a277105b239bdcb6490ec51366413643dbc8ed4a Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Mon, 5 Nov 2018 14:05:49 -0600 Subject: ARM: socfpga: dts: document "altr,stratix10-rst-mgr" binding "altr,stratix10-rst-mgr" is used for the Stratix10 reset manager. Signed-off-by: Dinh Nguyen Signed-off-by: Philipp Zabel --- Documentation/devicetree/bindings/reset/socfpga-reset.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/reset/socfpga-reset.txt b/Documentation/devicetree/bindings/reset/socfpga-reset.txt index 98c9f560e5c5..38fe34fd8b8a 100644 --- a/Documentation/devicetree/bindings/reset/socfpga-reset.txt +++ b/Documentation/devicetree/bindings/reset/socfpga-reset.txt @@ -1,7 +1,8 @@ Altera SOCFPGA Reset Manager Required properties: -- compatible : "altr,rst-mgr" +- compatible : "altr,rst-mgr" for (Cyclone5/Arria5/Arria10) + "altr,stratix10-rst-mgr","altr,rst-mgr" for Stratix10 ARM64 SoC - reg : Should contain 1 register ranges(address and length) - altr,modrst-offset : Should contain the offset of the first modrst register. - #reset-cells: 1 -- cgit v1.2.3 From 21b22136b4330abd1467e59fbe651ae4d18f0357 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Fri, 9 Nov 2018 10:42:04 +0900 Subject: dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals Replace the expression of "USB3 glue layer" with the glue layer of the generic peripherals to allow other devices to use it. The reset control belongs to this glue layer. Signed-off-by: Kunihiko Hayashi Reviewed-by: Rob Herring Signed-off-by: Philipp Zabel --- .../devicetree/bindings/reset/uniphier-reset.txt | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index 101743dda223..f63c511a9de8 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -120,27 +120,27 @@ Example: }; -USB3 core reset ---------------- +Peripheral core reset in glue layer +----------------------------------- -USB3 core reset belongs to USB3 glue layer. Before using the core reset, -it is necessary to control the clocks and resets to enable this layer. -These clocks and resets should be described in each property. +Some peripheral core reset belongs to its own glue layer. Before using +this core reset, it is necessary to control the clocks and resets to enable +this layer. These clocks and resets should be described in each property. Required properties: - compatible: Should be - "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC - "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC - "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC - "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC + "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC USB3 + "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3 + "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3 + "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3 - #reset-cells: Should be 1. - reg: Specifies offset and length of the register set for the device. -- clocks: A list of phandles to the clock gate for USB3 glue layer. +- clocks: A list of phandles to the clock gate for the glue layer. According to the clock-names, appropriate clocks are required. - clock-names: Should contain "gio", "link" - for Pro4 SoC "link" - for others -- resets: A list of phandles to the reset control for USB3 glue layer. +- resets: A list of phandles to the reset control for the glue layer. According to the reset-names, appropriate resets are required. - reset-names: Should contain "gio", "link" - for Pro4 SoC -- cgit v1.2.3 From 69af3d1b8a91cf9b426c4238964df847036bf214 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Fri, 9 Nov 2018 10:42:06 +0900 Subject: dt-bindings: reset: uniphier: Add AHCI core reset description Add compatible strings for reset control of AHCI core implemented in UniPhier SoCs. The reset control belongs to AHCI glue layer. Signed-off-by: Kunihiko Hayashi Reviewed-by: Rob Herring Signed-off-by: Philipp Zabel --- Documentation/devicetree/bindings/reset/uniphier-reset.txt | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index f63c511a9de8..ea005177d20a 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -133,6 +133,9 @@ Required properties: "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3 "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3 "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3 + "socionext,uniphier-pro4-ahci-reset" - for Pro4 SoC AHCI + "socionext,uniphier-pxs2-ahci-reset" - for PXs2 SoC AHCI + "socionext,uniphier-pxs3-ahci-reset" - for PXs3 SoC AHCI - #reset-cells: Should be 1. - reg: Specifies offset and length of the register set for the device. - clocks: A list of phandles to the clock gate for the glue layer. -- cgit v1.2.3 From a769fa7208b94f37b6240215dc6970f9d76fc58c Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Mon, 7 Jan 2019 22:57:17 +0100 Subject: bpf, doc: update design qa to reflect kern_version requirement Update the bpf_design_QA.rst to also reflect recent changes in 6c4fc209fcf9 ("bpf: remove useless version check for prog load"). Suggested-by: Quentin Monnet Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: Alexei Starovoitov --- Documentation/bpf/bpf_design_QA.rst | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/bpf/bpf_design_QA.rst b/Documentation/bpf/bpf_design_QA.rst index 6780a6d81745..7cc9e368c1e9 100644 --- a/Documentation/bpf/bpf_design_QA.rst +++ b/Documentation/bpf/bpf_design_QA.rst @@ -157,12 +157,11 @@ Q: Does BPF have a stable ABI? ------------------------------ A: YES. BPF instructions, arguments to BPF programs, set of helper functions and their arguments, recognized return codes are all part -of ABI. However when tracing programs are using bpf_probe_read() helper -to walk kernel internal datastructures and compile with kernel -internal headers these accesses can and will break with newer -kernels. The union bpf_attr -> kern_version is checked at load time -to prevent accidentally loading kprobe-based bpf programs written -for a different kernel. Networking programs don't do kern_version check. +of ABI. However there is one specific exception to tracing programs +which are using helpers like bpf_probe_read() to walk kernel internal +data structures and compile with kernel internal headers. Both of these +kernel internals are subject to change and can break with newer kernels +such that the program needs to be adapted accordingly. Q: How much stack space a BPF program uses? ------------------------------------------- -- cgit v1.2.3 From 735df0ff6ece7b8759a744158f5d246fae4739f4 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 21 Dec 2018 08:54:40 +0100 Subject: Documentation: driver core: remove use of BUS_ATTR We are getting rid of the "raw" BUS_ATTR() macro, so fix up the documentation to not refer to it anymore. Cc: "Rafael J. Wysocki" Signed-off-by: Greg Kroah-Hartman --- Documentation/driver-model/bus.txt | 8 ++++---- Documentation/filesystems/sysfs.txt | 4 +++- 2 files changed, 7 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/driver-model/bus.txt b/Documentation/driver-model/bus.txt index b577a45b93ea..c247b488a567 100644 --- a/Documentation/driver-model/bus.txt +++ b/Documentation/driver-model/bus.txt @@ -124,11 +124,11 @@ struct bus_attribute { ssize_t (*store)(struct bus_type *, const char * buf, size_t count); }; -Bus drivers can export attributes using the BUS_ATTR macro that works -similarly to the DEVICE_ATTR macro for devices. For example, a definition -like this: +Bus drivers can export attributes using the BUS_ATTR_RW macro that works +similarly to the DEVICE_ATTR_RW macro for devices. For example, a +definition like this: -static BUS_ATTR(debug,0644,show_debug,store_debug); +static BUS_ATTR_RW(debug); is equivalent to declaring: diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt index a1426cabcef1..41411b0c60a3 100644 --- a/Documentation/filesystems/sysfs.txt +++ b/Documentation/filesystems/sysfs.txt @@ -344,7 +344,9 @@ struct bus_attribute { Declaring: -BUS_ATTR(_name, _mode, _show, _store) +static BUS_ATTR_RW(name); +static BUS_ATTR_RO(name); +static BUS_ATTR_WO(name); Creation/Removal: -- cgit v1.2.3 From 1d69a3f8ae77e3dbfdc1356225cce5ea9c366aec Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Tue, 8 Jan 2019 15:22:53 -0800 Subject: zram: idle writeback fixes and cleanup This patch includes some fixes and cleanup for idle-page writeback. 1. writeback_limit interface Now writeback_limit interface is rather conusing. For example, once writeback limit budget is exausted, admin can see 0 from /sys/block/zramX/writeback_limit which is same semantic with disable writeback_limit at this moment. IOW, admin cannot tell that zero came from disable writeback limit or exausted writeback limit. To make the interface clear, let's sepatate enable of writeback limit to another knob - /sys/block/zram0/writeback_limit_enable * before: while true : # to re-enable writeback limit once previous one is used up echo 0 > /sys/block/zram0/writeback_limit echo $((200<<20)) > /sys/block/zram0/writeback_limit .. .. # used up the writeback limit budget * new # To enable writeback limit, from the beginning, admin should # enable it. echo $((200<<20)) > /sys/block/zram0/writeback_limit echo 1 > /sys/block/zram/0/writeback_limit_enable while true : echo $((200<<20)) > /sys/block/zram0/writeback_limit .. .. # used up the writeback limit budget It's much strightforward. 2. fix condition check idle/huge writeback mode check The mode in writeback_store is not bit opeartion any more so no need to use bit operations. Furthermore, current condition check is broken in that it does writeback every pages regardless of huge/idle. 3. clean up idle_store No need to use goto. [minchan@kernel.org: missed spin_lock_init] Link: http://lkml.kernel.org/r/20190103001601.GA255139@google.com Link: http://lkml.kernel.org/r/20181224033529.19450-1-minchan@kernel.org Signed-off-by: Minchan Kim Suggested-by: John Dias Cc: Sergey Senozhatsky Cc: John Dias Cc: Srinivas Paladugu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/ABI/testing/sysfs-block-zram | 11 +++- Documentation/blockdev/zram.txt | 74 +++++++++++++++--------- drivers/block/zram/zram_drv.c | 90 ++++++++++++++++++++++-------- drivers/block/zram/zram_drv.h | 5 +- 4 files changed, 125 insertions(+), 55 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram index 9d2339a485c8..14b2bf2e5105 100644 --- a/Documentation/ABI/testing/sysfs-block-zram +++ b/Documentation/ABI/testing/sysfs-block-zram @@ -122,11 +122,18 @@ Description: statistics (bd_count, bd_reads, bd_writes) in a format similar to block layer statistics file format. +What: /sys/block/zram/writeback_limit_enable +Date: November 2018 +Contact: Minchan Kim +Description: + The writeback_limit_enable file is read-write and specifies + eanbe of writeback_limit feature. "1" means eable the feature. + No limit "0" is the initial state. + What: /sys/block/zram/writeback_limit Date: November 2018 Contact: Minchan Kim Description: The writeback_limit file is read-write and specifies the maximum amount of writeback ZRAM can do. The limit could be changed - in run time and "0" means disable the limit. - No limit is the initial state. + in run time. diff --git a/Documentation/blockdev/zram.txt b/Documentation/blockdev/zram.txt index 436c5e98e1b6..4df0ce271085 100644 --- a/Documentation/blockdev/zram.txt +++ b/Documentation/blockdev/zram.txt @@ -156,22 +156,23 @@ Per-device statistics are exported as various nodes under /sys/block/zram/ A brief description of exported device attributes. For more details please read Documentation/ABI/testing/sysfs-block-zram. -Name access description ----- ------ ----------- -disksize RW show and set the device's disk size -initstate RO shows the initialization state of the device -reset WO trigger device reset -mem_used_max WO reset the `mem_used_max' counter (see later) -mem_limit WO specifies the maximum amount of memory ZRAM can use - to store the compressed data -writeback_limit WO specifies the maximum amount of write IO zram can - write out to backing device as 4KB unit -max_comp_streams RW the number of possible concurrent compress operations -comp_algorithm RW show and change the compression algorithm -compact WO trigger memory compaction -debug_stat RO this file is used for zram debugging purposes -backing_dev RW set up backend storage for zram to write out -idle WO mark allocated slot as idle +Name access description +---- ------ ----------- +disksize RW show and set the device's disk size +initstate RO shows the initialization state of the device +reset WO trigger device reset +mem_used_max WO reset the `mem_used_max' counter (see later) +mem_limit WO specifies the maximum amount of memory ZRAM can use + to store the compressed data +writeback_limit WO specifies the maximum amount of write IO zram can + write out to backing device as 4KB unit +writeback_limit_enable RW show and set writeback_limit feature +max_comp_streams RW the number of possible concurrent compress operations +comp_algorithm RW show and change the compression algorithm +compact WO trigger memory compaction +debug_stat RO this file is used for zram debugging purposes +backing_dev RW set up backend storage for zram to write out +idle WO mark allocated slot as idle User space is advised to use the following files to read the device statistics. @@ -280,32 +281,51 @@ With the command, zram writeback idle pages from memory to the storage. If there are lots of write IO with flash device, potentially, it has flash wearout problem so that admin needs to design write limitation to guarantee storage health for entire product life. -To overcome the concern, zram supports "writeback_limit". -The "writeback_limit"'s default value is 0 so that it doesn't limit -any writeback. If admin want to measure writeback count in a certain -period, he could know it via /sys/block/zram0/bd_stat's 3rd column. + +To overcome the concern, zram supports "writeback_limit" feature. +The "writeback_limit_enable"'s default value is 0 so that it doesn't limit +any writeback. IOW, if admin want to apply writeback budget, he should +enable writeback_limit_enable via + + $ echo 1 > /sys/block/zramX/writeback_limit_enable + +Once writeback_limit_enable is set, zram doesn't allow any writeback +until admin set the budget via /sys/block/zramX/writeback_limit. + +(If admin doesn't enable writeback_limit_enable, writeback_limit's value +assigned via /sys/block/zramX/writeback_limit is meaninless.) If admin want to limit writeback as per-day 400M, he could do it like below. - MB_SHIFT=20 - 4K_SHIFT=12 - echo $((400<>4K_SHIFT)) > \ - /sys/block/zram0/writeback_limit. + $ MB_SHIFT=20 + $ 4K_SHIFT=12 + $ echo $((400<>4K_SHIFT)) > \ + /sys/block/zram0/writeback_limit. + $ echo 1 > /sys/block/zram0/writeback_limit_enable -If admin want to allow further write again, he could do it like below +If admin want to allow further write again once the bugdet is exausted, +he could do it like below - echo 0 > /sys/block/zram0/writeback_limit + $ echo $((400<>4K_SHIFT)) > \ + /sys/block/zram0/writeback_limit If admin want to see remaining writeback budget since he set, - cat /sys/block/zram0/writeback_limit + $ cat /sys/block/zramX/writeback_limit + +If admin want to disable writeback limit, he could do + + $ echo 0 > /sys/block/zramX/writeback_limit_enable The writeback_limit count will reset whenever you reset zram(e.g., system reboot, echo 1 > /sys/block/zramX/reset) so keeping how many of writeback happened until you reset the zram to allocate extra writeback budget in next setting is user's job. +If admin want to measure writeback count in a certain period, he could +know it via /sys/block/zram0/bd_stat's 3rd column. + = memory tracking With CONFIG_ZRAM_MEMORY_TRACKING, user can know information of the diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c index 33c5cc879f24..04ca65912638 100644 --- a/drivers/block/zram/zram_drv.c +++ b/drivers/block/zram/zram_drv.c @@ -316,11 +316,9 @@ static ssize_t idle_store(struct device *dev, * See the comment in writeback_store. */ zram_slot_lock(zram, index); - if (!zram_allocated(zram, index) || - zram_test_flag(zram, index, ZRAM_UNDER_WB)) - goto next; - zram_set_flag(zram, index, ZRAM_IDLE); -next: + if (zram_allocated(zram, index) && + !zram_test_flag(zram, index, ZRAM_UNDER_WB)) + zram_set_flag(zram, index, ZRAM_IDLE); zram_slot_unlock(zram, index); } @@ -330,6 +328,41 @@ next: } #ifdef CONFIG_ZRAM_WRITEBACK +static ssize_t writeback_limit_enable_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t len) +{ + struct zram *zram = dev_to_zram(dev); + u64 val; + ssize_t ret = -EINVAL; + + if (kstrtoull(buf, 10, &val)) + return ret; + + down_read(&zram->init_lock); + spin_lock(&zram->wb_limit_lock); + zram->wb_limit_enable = val; + spin_unlock(&zram->wb_limit_lock); + up_read(&zram->init_lock); + ret = len; + + return ret; +} + +static ssize_t writeback_limit_enable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + bool val; + struct zram *zram = dev_to_zram(dev); + + down_read(&zram->init_lock); + spin_lock(&zram->wb_limit_lock); + val = zram->wb_limit_enable; + spin_unlock(&zram->wb_limit_lock); + up_read(&zram->init_lock); + + return scnprintf(buf, PAGE_SIZE, "%d\n", val); +} + static ssize_t writeback_limit_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t len) { @@ -341,9 +374,9 @@ static ssize_t writeback_limit_store(struct device *dev, return ret; down_read(&zram->init_lock); - atomic64_set(&zram->stats.bd_wb_limit, val); - if (val == 0) - zram->stop_writeback = false; + spin_lock(&zram->wb_limit_lock); + zram->bd_wb_limit = val; + spin_unlock(&zram->wb_limit_lock); up_read(&zram->init_lock); ret = len; @@ -357,7 +390,9 @@ static ssize_t writeback_limit_show(struct device *dev, struct zram *zram = dev_to_zram(dev); down_read(&zram->init_lock); - val = atomic64_read(&zram->stats.bd_wb_limit); + spin_lock(&zram->wb_limit_lock); + val = zram->bd_wb_limit; + spin_unlock(&zram->wb_limit_lock); up_read(&zram->init_lock); return scnprintf(buf, PAGE_SIZE, "%llu\n", val); @@ -588,8 +623,8 @@ static int read_from_bdev_async(struct zram *zram, struct bio_vec *bvec, return 1; } -#define HUGE_WRITEBACK 0x1 -#define IDLE_WRITEBACK 0x2 +#define HUGE_WRITEBACK 1 +#define IDLE_WRITEBACK 2 static ssize_t writeback_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t len) @@ -602,7 +637,7 @@ static ssize_t writeback_store(struct device *dev, struct page *page; ssize_t ret, sz; char mode_buf[8]; - unsigned long mode = -1UL; + int mode = -1; unsigned long blk_idx = 0; sz = strscpy(mode_buf, buf, sizeof(mode_buf)); @@ -618,7 +653,7 @@ static ssize_t writeback_store(struct device *dev, else if (!strcmp(mode_buf, "huge")) mode = HUGE_WRITEBACK; - if (mode == -1UL) + if (mode == -1) return -EINVAL; down_read(&zram->init_lock); @@ -645,10 +680,13 @@ static ssize_t writeback_store(struct device *dev, bvec.bv_len = PAGE_SIZE; bvec.bv_offset = 0; - if (zram->stop_writeback) { + spin_lock(&zram->wb_limit_lock); + if (zram->wb_limit_enable && !zram->bd_wb_limit) { + spin_unlock(&zram->wb_limit_lock); ret = -EIO; break; } + spin_unlock(&zram->wb_limit_lock); if (!blk_idx) { blk_idx = alloc_block_bdev(zram); @@ -667,10 +705,11 @@ static ssize_t writeback_store(struct device *dev, zram_test_flag(zram, index, ZRAM_UNDER_WB)) goto next; - if ((mode & IDLE_WRITEBACK && - !zram_test_flag(zram, index, ZRAM_IDLE)) && - (mode & HUGE_WRITEBACK && - !zram_test_flag(zram, index, ZRAM_HUGE))) + if (mode == IDLE_WRITEBACK && + !zram_test_flag(zram, index, ZRAM_IDLE)) + goto next; + if (mode == HUGE_WRITEBACK && + !zram_test_flag(zram, index, ZRAM_HUGE)) goto next; /* * Clearing ZRAM_UNDER_WB is duty of caller. @@ -732,11 +771,10 @@ static ssize_t writeback_store(struct device *dev, zram_set_element(zram, index, blk_idx); blk_idx = 0; atomic64_inc(&zram->stats.pages_stored); - if (atomic64_add_unless(&zram->stats.bd_wb_limit, - -1 << (PAGE_SHIFT - 12), 0)) { - if (atomic64_read(&zram->stats.bd_wb_limit) == 0) - zram->stop_writeback = true; - } + spin_lock(&zram->wb_limit_lock); + if (zram->wb_limit_enable && zram->bd_wb_limit > 0) + zram->bd_wb_limit -= 1UL << (PAGE_SHIFT - 12); + spin_unlock(&zram->wb_limit_lock); next: zram_slot_unlock(zram, index); } @@ -1812,6 +1850,7 @@ static DEVICE_ATTR_RW(comp_algorithm); static DEVICE_ATTR_RW(backing_dev); static DEVICE_ATTR_WO(writeback); static DEVICE_ATTR_RW(writeback_limit); +static DEVICE_ATTR_RW(writeback_limit_enable); #endif static struct attribute *zram_disk_attrs[] = { @@ -1828,6 +1867,7 @@ static struct attribute *zram_disk_attrs[] = { &dev_attr_backing_dev.attr, &dev_attr_writeback.attr, &dev_attr_writeback_limit.attr, + &dev_attr_writeback_limit_enable.attr, #endif &dev_attr_io_stat.attr, &dev_attr_mm_stat.attr, @@ -1867,7 +1907,9 @@ static int zram_add(void) device_id = ret; init_rwsem(&zram->init_lock); - +#ifdef CONFIG_ZRAM_WRITEBACK + spin_lock_init(&zram->wb_limit_lock); +#endif queue = blk_alloc_queue(GFP_KERNEL); if (!queue) { pr_err("Error allocating disk queue for device %d\n", diff --git a/drivers/block/zram/zram_drv.h b/drivers/block/zram/zram_drv.h index 4bd3afd15e83..f2fd46daa760 100644 --- a/drivers/block/zram/zram_drv.h +++ b/drivers/block/zram/zram_drv.h @@ -86,7 +86,6 @@ struct zram_stats { atomic64_t bd_count; /* no. of pages in backing device */ atomic64_t bd_reads; /* no. of reads from backing device */ atomic64_t bd_writes; /* no. of writes from backing device */ - atomic64_t bd_wb_limit; /* writeback limit of backing device */ #endif }; @@ -114,8 +113,10 @@ struct zram { */ bool claim; /* Protected by bdev->bd_mutex */ struct file *backing_dev; - bool stop_writeback; #ifdef CONFIG_ZRAM_WRITEBACK + spinlock_t wb_limit_lock; + bool wb_limit_enable; + u64 bd_wb_limit; struct block_device *bdev; unsigned int old_block_size; unsigned long *bitmap; -- cgit v1.2.3 From 90802938f7e88045ace123e105e22e8c3e7f9c7e Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 8 Jan 2019 17:38:29 +0100 Subject: x86/cache: Rename config option to CONFIG_X86_RESCTRL CONFIG_RESCTRL is too generic. The final goal is to have a generic option called like this which is selected by the arch-specific ones CONFIG_X86_RESCTRL and CONFIG_ARM64_RESCTRL. The generic one will cover the resctrl filesystem and other generic and shared bits of functionality. Signed-off-by: Borislav Petkov Suggested-by: Ingo Molnar Requested-by: Linus Torvalds Cc: Babu Moger Cc: Fenghua Yu Cc: James Morse Cc: Reinette Chatre Cc: Tony Luck Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20190108171401.GC12235@zn.tnic --- Documentation/x86/resctrl_ui.txt | 2 +- arch/x86/Kconfig | 2 +- arch/x86/include/asm/resctrl_sched.h | 4 ++-- arch/x86/kernel/cpu/Makefile | 2 +- arch/x86/kernel/cpu/resctrl/Makefile | 4 ++-- include/linux/sched.h | 2 +- 6 files changed, 8 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/x86/resctrl_ui.txt b/Documentation/x86/resctrl_ui.txt index d9aed8303984..e8e8d14d3c4e 100644 --- a/Documentation/x86/resctrl_ui.txt +++ b/Documentation/x86/resctrl_ui.txt @@ -9,7 +9,7 @@ Fenghua Yu Tony Luck Vikas Shivappa -This feature is enabled by the CONFIG_RESCTRL and the X86 /proc/cpuinfo +This feature is enabled by the CONFIG_X86_RESCTRL and the x86 /proc/cpuinfo flag bits: RDT (Resource Director Technology) Allocation - "rdt_a" CAT (Cache Allocation Technology) - "cat_l3", "cat_l2" diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 6185d4f33296..15af091611e2 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -446,7 +446,7 @@ config RETPOLINE branches. Requires a compiler with -mindirect-branch=thunk-extern support for full protection. The kernel may run slower. -config RESCTRL +config X86_RESCTRL bool "Resource Control support" depends on X86 && (CPU_SUP_INTEL || CPU_SUP_AMD) select KERNFS diff --git a/arch/x86/include/asm/resctrl_sched.h b/arch/x86/include/asm/resctrl_sched.h index 54990fe2a3ae..40ebddde6ac2 100644 --- a/arch/x86/include/asm/resctrl_sched.h +++ b/arch/x86/include/asm/resctrl_sched.h @@ -2,7 +2,7 @@ #ifndef _ASM_X86_RESCTRL_SCHED_H #define _ASM_X86_RESCTRL_SCHED_H -#ifdef CONFIG_RESCTRL +#ifdef CONFIG_X86_RESCTRL #include #include @@ -88,6 +88,6 @@ static inline void resctrl_sched_in(void) static inline void resctrl_sched_in(void) {} -#endif /* CONFIG_RESCTRL */ +#endif /* CONFIG_X86_RESCTRL */ #endif /* _ASM_X86_RESCTRL_SCHED_H */ diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index ac78f90aea56..b6fa0869f7aa 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -39,7 +39,7 @@ obj-$(CONFIG_CPU_SUP_UMC_32) += umc.o obj-$(CONFIG_X86_MCE) += mce/ obj-$(CONFIG_MTRR) += mtrr/ obj-$(CONFIG_MICROCODE) += microcode/ -obj-$(CONFIG_RESCTRL) += resctrl/ +obj-$(CONFIG_X86_RESCTRL) += resctrl/ obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o diff --git a/arch/x86/kernel/cpu/resctrl/Makefile b/arch/x86/kernel/cpu/resctrl/Makefile index 6895049ceef7..1cabe6fd8e11 100644 --- a/arch/x86/kernel/cpu/resctrl/Makefile +++ b/arch/x86/kernel/cpu/resctrl/Makefile @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_RESCTRL) += core.o rdtgroup.o monitor.o -obj-$(CONFIG_RESCTRL) += ctrlmondata.o pseudo_lock.o +obj-$(CONFIG_X86_RESCTRL) += core.o rdtgroup.o monitor.o +obj-$(CONFIG_X86_RESCTRL) += ctrlmondata.o pseudo_lock.o CFLAGS_pseudo_lock.o = -I$(src) diff --git a/include/linux/sched.h b/include/linux/sched.h index 89541d248893..224666226e87 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -995,7 +995,7 @@ struct task_struct { /* cg_list protected by css_set_lock and tsk->alloc_lock: */ struct list_head cg_list; #endif -#ifdef CONFIG_RESCTRL +#ifdef CONFIG_X86_RESCTRL u32 closid; u32 rmid; #endif -- cgit v1.2.3 From 7604bf0920985c9280c8b24e2f0c3e4ed47f502f Mon Sep 17 00:00:00 2001 From: Otto Sabart Date: Wed, 9 Jan 2019 00:56:51 +0100 Subject: doc: trace: fix reference to cpuidle documentation file Old cpuidle/sysfs.txt file was replaced in aa5eee355b46. So, refer to an updated file. Fixes: aa5eee355b46 (Documentation: admin-guide: PM: Add cpuidle document) Signed-off-by: Otto Sabart Signed-off-by: Rafael J. Wysocki --- Documentation/trace/coresight-cpu-debug.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/trace/coresight-cpu-debug.txt b/Documentation/trace/coresight-cpu-debug.txt index 89ab09e78e8d..f07e38094b40 100644 --- a/Documentation/trace/coresight-cpu-debug.txt +++ b/Documentation/trace/coresight-cpu-debug.txt @@ -165,7 +165,7 @@ Do some work... The same can also be done from an application program. Disable specific CPU's specific idle state from cpuidle sysfs (see -Documentation/cpuidle/sysfs.txt): +Documentation/admin-guide/pm/cpuidle.rst): # echo 1 > /sys/devices/system/cpu/cpu$cpu/cpuidle/state$state/disable -- cgit v1.2.3 From 47cb393ee4815e10ab66f981fed581afdcc7caac Mon Sep 17 00:00:00 2001 From: John Pittman Date: Tue, 8 Jan 2019 16:56:13 -0500 Subject: block: doc: add slice_idle_us to bfq documentation Of the tunables available for the bfq I/O scheduler, the only one missing from the documentation in 'Documentation/block/bfq-iosched.txt' is slice_idle_us. Add this tunable to the documentation and a short explanation of its purpose. Acked-by: Paolo Valente Signed-off-by: John Pittman Signed-off-by: Jens Axboe --- Documentation/block/bfq-iosched.txt | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'Documentation') diff --git a/Documentation/block/bfq-iosched.txt b/Documentation/block/bfq-iosched.txt index 8d8d8f06cab2..98a8dd5ee385 100644 --- a/Documentation/block/bfq-iosched.txt +++ b/Documentation/block/bfq-iosched.txt @@ -357,6 +357,13 @@ video playing/streaming, a very low drop rate may be more important than maximum throughput. In these cases, consider setting the strict_guarantees parameter. +slice_idle_us +------------- + +Controls the same tuning parameter as slice_idle, but in microseconds. +Either tunable can be used to set idling behavior. Afterwards, the +other tunable will reflect the newly set value in sysfs. + strict_guarantees ----------------- -- cgit v1.2.3 From cf1754c2a1d6e92688f7353aa7f598f5ad6d8f78 Mon Sep 17 00:00:00 2001 From: Christophe de Dinechin Date: Mon, 7 Jan 2019 18:52:38 +0100 Subject: Documentation/virtual/kvm: Update URL for AMD SEV API specification The URL of [api-spec] in Documentation/virtual/kvm/amd-memory-encryption.rst is no longer valid, replaced space with underscore. Signed-off-by: Christophe de Dinechin Reviewed-by: Brijesh Singh Signed-off-by: Radim Krčmář --- Documentation/virtual/kvm/amd-memory-encryption.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/virtual/kvm/amd-memory-encryption.rst b/Documentation/virtual/kvm/amd-memory-encryption.rst index 71d6d257074f..659bbc093b52 100644 --- a/Documentation/virtual/kvm/amd-memory-encryption.rst +++ b/Documentation/virtual/kvm/amd-memory-encryption.rst @@ -242,6 +242,6 @@ References ========== .. [white-paper] http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2013/12/AMD_Memory_Encryption_Whitepaper_v7-Public.pdf -.. [api-spec] http://support.amd.com/TechDocs/55766_SEV-KM%20API_Specification.pdf +.. [api-spec] http://support.amd.com/TechDocs/55766_SEV-KM_API_Specification.pdf .. [amd-apm] http://support.amd.com/TechDocs/24593.pdf (section 15.34) .. [kvm-forum] http://www.linux-kvm.org/images/7/74/02x08A-Thomas_Lendacky-AMDs_Virtualizatoin_Memory_Encryption_Technology.pdf -- cgit v1.2.3 From ef4efa14560adf7cdc77022c86e659d910c5c6fc Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Fri, 4 Jan 2019 22:56:56 +0100 Subject: dt-bindings: marvell,mmp2: fix typos in bindings doc A pair of rather trivial ones. Signed-off-by: Lubomir Rintel Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/clock/marvell,mmp2.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt b/Documentation/devicetree/bindings/clock/marvell,mmp2.txt index af376a01f2b7..23b52dc02266 100644 --- a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt +++ b/Documentation/devicetree/bindings/clock/marvell,mmp2.txt @@ -18,4 +18,4 @@ Required Properties: Each clock is assigned an identifier and client nodes use this identifier to specify the clock which they consume. -All these identifier could be found in . +All these identifiers could be found in . -- cgit v1.2.3 From 8217724eb7c51bbec351b23cbc924577b2f4b8e6 Mon Sep 17 00:00:00 2001 From: Otto Sabart Date: Wed, 9 Jan 2019 00:46:55 +0100 Subject: doc: bindings: fix bad reference to ARM CPU bindings The primecell.txt and cpus.txt files were converted into YAML. This patch updates old references with new ones. Fixes: d3c207eeb905 ("dt-bindings: arm: Convert primecell binding to json-schema") Fixes: 672951cbd1b7 ("dt-bindings: arm: Convert cpu binding to json-schema") Signed-off-by: Otto Sabart Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/arm/cpu-capacity.txt | 2 +- Documentation/devicetree/bindings/arm/idle-states.txt | 2 +- Documentation/devicetree/bindings/arm/sp810.txt | 2 +- Documentation/devicetree/bindings/arm/topology.txt | 2 +- Documentation/devicetree/bindings/display/arm,pl11x.txt | 2 +- Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/cpu-capacity.txt b/Documentation/devicetree/bindings/arm/cpu-capacity.txt index 84262cdb8d29..96fa46cb133c 100644 --- a/Documentation/devicetree/bindings/arm/cpu-capacity.txt +++ b/Documentation/devicetree/bindings/arm/cpu-capacity.txt @@ -235,4 +235,4 @@ cpus { =========================================== [1] ARM Linux Kernel documentation - CPUs bindings - Documentation/devicetree/bindings/arm/cpus.txt + Documentation/devicetree/bindings/arm/cpus.yaml diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt index 8f0937db55c5..45730ba60af5 100644 --- a/Documentation/devicetree/bindings/arm/idle-states.txt +++ b/Documentation/devicetree/bindings/arm/idle-states.txt @@ -684,7 +684,7 @@ cpus { =========================================== [1] ARM Linux Kernel documentation - CPUs bindings - Documentation/devicetree/bindings/arm/cpus.txt + Documentation/devicetree/bindings/arm/cpus.yaml [2] ARM Linux Kernel documentation - PSCI bindings Documentation/devicetree/bindings/arm/psci.txt diff --git a/Documentation/devicetree/bindings/arm/sp810.txt b/Documentation/devicetree/bindings/arm/sp810.txt index 1b2ab1ff5587..46652bf65147 100644 --- a/Documentation/devicetree/bindings/arm/sp810.txt +++ b/Documentation/devicetree/bindings/arm/sp810.txt @@ -4,7 +4,7 @@ SP810 System Controller Required properties: - compatible: standard compatible string for a Primecell peripheral, - see Documentation/devicetree/bindings/arm/primecell.txt + see Documentation/devicetree/bindings/arm/primecell.yaml for more details should be: "arm,sp810", "arm,primecell" diff --git a/Documentation/devicetree/bindings/arm/topology.txt b/Documentation/devicetree/bindings/arm/topology.txt index de9eb0486630..b0d80c0fb265 100644 --- a/Documentation/devicetree/bindings/arm/topology.txt +++ b/Documentation/devicetree/bindings/arm/topology.txt @@ -472,4 +472,4 @@ cpus { =============================================================================== [1] ARM Linux kernel documentation - Documentation/devicetree/bindings/arm/cpus.txt + Documentation/devicetree/bindings/arm/cpus.yaml diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.txt b/Documentation/devicetree/bindings/display/arm,pl11x.txt index ef89ab46b2c9..572fa2773ec4 100644 --- a/Documentation/devicetree/bindings/display/arm,pl11x.txt +++ b/Documentation/devicetree/bindings/display/arm,pl11x.txt @@ -1,6 +1,6 @@ * ARM PrimeCell Color LCD Controller PL110/PL111 -See also Documentation/devicetree/bindings/arm/primecell.txt +See also Documentation/devicetree/bindings/arm/primecell.yaml Required properties: diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt index b83bb8249074..a3be5298a5eb 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt @@ -78,7 +78,7 @@ Sub-nodes: PPI affinity can be expressed as a single "ppi-partitions" node, containing a set of sub-nodes, each with the following property: - affinity: Should be a list of phandles to CPU nodes (as described in -Documentation/devicetree/bindings/arm/cpus.txt). + Documentation/devicetree/bindings/arm/cpus.yaml). GICv3 has one or more Interrupt Translation Services (ITS) that are used to route Message Signalled Interrupts (MSI) to the CPUs. -- cgit v1.2.3 From e122d845a01ece2ddd28b2f125ef2db66b8b627a Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 10 Jan 2019 16:59:13 +0000 Subject: Revert "rxrpc: Allow failed client calls to be retried" The changes introduced to allow rxrpc calls to be retried creates an issue when it comes to refcounting afs_call structs. The problem is that when rxrpc_send_data() queues the last packet for an asynchronous call, the following sequence can occur: (1) The notify_end_tx callback is invoked which causes the state in the afs_call to be changed from AFS_CALL_CL_REQUESTING or AFS_CALL_SV_REPLYING. (2) afs_deliver_to_call() can then process event notifications from rxrpc on the async_work queue. (3) Delivery of events, such as an abort from the server, can cause the afs_call state to be changed to AFS_CALL_COMPLETE on async_work. (4) For an asynchronous call, afs_process_async_call() notes that the call is complete and tried to clean up all the refs on async_work. (5) rxrpc_send_data() might return the amount of data transferred (success) or an error - which could in turn reflect a local error or a received error. Synchronising the clean up after rxrpc_kernel_send_data() returns an error with the asynchronous cleanup is then tricky to get right. Mostly revert commit c038a58ccfd6704d4d7d60ed3d6a0fca13cf13a4. The two API functions the original commit added aren't currently used. This makes rxrpc_kernel_send_data() always return successfully if it queued the data it was given. Note that this doesn't affect synchronous calls since their Rx notification function merely pokes a wait queue and does not refcounting. The asynchronous call notification function *has* to do refcounting and pass a ref over the work item to avoid the need to sync the workqueue in call cleanup. Signed-off-by: David Howells Signed-off-by: David S. Miller --- Documentation/networking/rxrpc.txt | 45 ------------------ include/net/af_rxrpc.h | 16 ------- net/rxrpc/af_rxrpc.c | 70 --------------------------- net/rxrpc/ar-internal.h | 19 +++++--- net/rxrpc/call_object.c | 97 -------------------------------------- net/rxrpc/conn_client.c | 5 +- net/rxrpc/sendmsg.c | 24 +++++----- 7 files changed, 24 insertions(+), 252 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt index c9d052e0cf51..2df5894353d6 100644 --- a/Documentation/networking/rxrpc.txt +++ b/Documentation/networking/rxrpc.txt @@ -1000,51 +1000,6 @@ The kernel interface functions are as follows: size should be set when the call is begun. tx_total_len may not be less than zero. - (*) Check to see the completion state of a call so that the caller can assess - whether it needs to be retried. - - enum rxrpc_call_completion { - RXRPC_CALL_SUCCEEDED, - RXRPC_CALL_REMOTELY_ABORTED, - RXRPC_CALL_LOCALLY_ABORTED, - RXRPC_CALL_LOCAL_ERROR, - RXRPC_CALL_NETWORK_ERROR, - }; - - int rxrpc_kernel_check_call(struct socket *sock, struct rxrpc_call *call, - enum rxrpc_call_completion *_compl, - u32 *_abort_code); - - On return, -EINPROGRESS will be returned if the call is still ongoing; if - it is finished, *_compl will be set to indicate the manner of completion, - *_abort_code will be set to any abort code that occurred. 0 will be - returned on a successful completion, -ECONNABORTED will be returned if the - client failed due to a remote abort and anything else will return an - appropriate error code. - - The caller should look at this information to decide if it's worth - retrying the call. - - (*) Retry a client call. - - int rxrpc_kernel_retry_call(struct socket *sock, - struct rxrpc_call *call, - struct sockaddr_rxrpc *srx, - struct key *key); - - This attempts to partially reinitialise a call and submit it again while - reusing the original call's Tx queue to avoid the need to repackage and - re-encrypt the data to be sent. call indicates the call to retry, srx the - new address to send it to and key the encryption key to use for signing or - encrypting the packets. - - For this to work, the first Tx data packet must still be in the transmit - queue, and currently this is only permitted for local and network errors - and the call must not have been aborted. Any partially constructed Tx - packet is left as is and can continue being filled afterwards. - - It returns 0 if the call was requeued and an error otherwise. - (*) Get call RTT. u64 rxrpc_kernel_get_rtt(struct socket *sock, struct rxrpc_call *call); diff --git a/include/net/af_rxrpc.h b/include/net/af_rxrpc.h index 1adefe42c0a6..2bfb87eb98ce 100644 --- a/include/net/af_rxrpc.h +++ b/include/net/af_rxrpc.h @@ -20,18 +20,6 @@ struct sock; struct socket; struct rxrpc_call; -/* - * Call completion condition (state == RXRPC_CALL_COMPLETE). - */ -enum rxrpc_call_completion { - RXRPC_CALL_SUCCEEDED, /* - Normal termination */ - RXRPC_CALL_REMOTELY_ABORTED, /* - call aborted by peer */ - RXRPC_CALL_LOCALLY_ABORTED, /* - call aborted locally on error or close */ - RXRPC_CALL_LOCAL_ERROR, /* - call failed due to local error */ - RXRPC_CALL_NETWORK_ERROR, /* - call terminated by network error */ - NR__RXRPC_CALL_COMPLETIONS -}; - /* * Debug ID counter for tracing. */ @@ -73,10 +61,6 @@ int rxrpc_kernel_charge_accept(struct socket *, rxrpc_notify_rx_t, rxrpc_user_attach_call_t, unsigned long, gfp_t, unsigned int); void rxrpc_kernel_set_tx_length(struct socket *, struct rxrpc_call *, s64); -int rxrpc_kernel_retry_call(struct socket *, struct rxrpc_call *, - struct sockaddr_rxrpc *, struct key *); -int rxrpc_kernel_check_call(struct socket *, struct rxrpc_call *, - enum rxrpc_call_completion *, u32 *); u32 rxrpc_kernel_check_life(const struct socket *, const struct rxrpc_call *); void rxrpc_kernel_probe_life(struct socket *, struct rxrpc_call *); u32 rxrpc_kernel_get_epoch(struct socket *, struct rxrpc_call *); diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c index a2522f9d71e2..96f2952bbdfd 100644 --- a/net/rxrpc/af_rxrpc.c +++ b/net/rxrpc/af_rxrpc.c @@ -418,76 +418,6 @@ u32 rxrpc_kernel_get_epoch(struct socket *sock, struct rxrpc_call *call) } EXPORT_SYMBOL(rxrpc_kernel_get_epoch); -/** - * rxrpc_kernel_check_call - Check a call's state - * @sock: The socket the call is on - * @call: The call to check - * @_compl: Where to store the completion state - * @_abort_code: Where to store any abort code - * - * Allow a kernel service to query the state of a call and find out the manner - * of its termination if it has completed. Returns -EINPROGRESS if the call is - * still going, 0 if the call finished successfully, -ECONNABORTED if the call - * was aborted and an appropriate error if the call failed in some other way. - */ -int rxrpc_kernel_check_call(struct socket *sock, struct rxrpc_call *call, - enum rxrpc_call_completion *_compl, u32 *_abort_code) -{ - if (call->state != RXRPC_CALL_COMPLETE) - return -EINPROGRESS; - smp_rmb(); - *_compl = call->completion; - *_abort_code = call->abort_code; - return call->error; -} -EXPORT_SYMBOL(rxrpc_kernel_check_call); - -/** - * rxrpc_kernel_retry_call - Allow a kernel service to retry a call - * @sock: The socket the call is on - * @call: The call to retry - * @srx: The address of the peer to contact - * @key: The security context to use (defaults to socket setting) - * - * Allow a kernel service to try resending a client call that failed due to a - * network error to a new address. The Tx queue is maintained intact, thereby - * relieving the need to re-encrypt any request data that has already been - * buffered. - */ -int rxrpc_kernel_retry_call(struct socket *sock, struct rxrpc_call *call, - struct sockaddr_rxrpc *srx, struct key *key) -{ - struct rxrpc_conn_parameters cp; - struct rxrpc_sock *rx = rxrpc_sk(sock->sk); - int ret; - - _enter("%d{%d}", call->debug_id, atomic_read(&call->usage)); - - if (!key) - key = rx->key; - if (key && !key->payload.data[0]) - key = NULL; /* a no-security key */ - - memset(&cp, 0, sizeof(cp)); - cp.local = rx->local; - cp.key = key; - cp.security_level = 0; - cp.exclusive = false; - cp.service_id = srx->srx_service; - - mutex_lock(&call->user_mutex); - - ret = rxrpc_prepare_call_for_retry(rx, call); - if (ret == 0) - ret = rxrpc_retry_client_call(rx, call, &cp, srx, GFP_KERNEL); - - mutex_unlock(&call->user_mutex); - rxrpc_put_peer(cp.peer); - _leave(" = %d", ret); - return ret; -} -EXPORT_SYMBOL(rxrpc_kernel_retry_call); - /** * rxrpc_kernel_new_call_notification - Get notifications of new calls * @sock: The socket to intercept received messages on diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h index bc628acf4f4f..4b1a534d290a 100644 --- a/net/rxrpc/ar-internal.h +++ b/net/rxrpc/ar-internal.h @@ -476,7 +476,6 @@ enum rxrpc_call_flag { RXRPC_CALL_EXPOSED, /* The call was exposed to the world */ RXRPC_CALL_RX_LAST, /* Received the last packet (at rxtx_top) */ RXRPC_CALL_TX_LAST, /* Last packet in Tx buffer (at rxtx_top) */ - RXRPC_CALL_TX_LASTQ, /* Last packet has been queued */ RXRPC_CALL_SEND_PING, /* A ping will need to be sent */ RXRPC_CALL_PINGING, /* Ping in process */ RXRPC_CALL_RETRANS_TIMEOUT, /* Retransmission due to timeout occurred */ @@ -517,6 +516,18 @@ enum rxrpc_call_state { NR__RXRPC_CALL_STATES }; +/* + * Call completion condition (state == RXRPC_CALL_COMPLETE). + */ +enum rxrpc_call_completion { + RXRPC_CALL_SUCCEEDED, /* - Normal termination */ + RXRPC_CALL_REMOTELY_ABORTED, /* - call aborted by peer */ + RXRPC_CALL_LOCALLY_ABORTED, /* - call aborted locally on error or close */ + RXRPC_CALL_LOCAL_ERROR, /* - call failed due to local error */ + RXRPC_CALL_NETWORK_ERROR, /* - call terminated by network error */ + NR__RXRPC_CALL_COMPLETIONS +}; + /* * Call Tx congestion management modes. */ @@ -761,15 +772,9 @@ struct rxrpc_call *rxrpc_new_client_call(struct rxrpc_sock *, struct sockaddr_rxrpc *, struct rxrpc_call_params *, gfp_t, unsigned int); -int rxrpc_retry_client_call(struct rxrpc_sock *, - struct rxrpc_call *, - struct rxrpc_conn_parameters *, - struct sockaddr_rxrpc *, - gfp_t); void rxrpc_incoming_call(struct rxrpc_sock *, struct rxrpc_call *, struct sk_buff *); void rxrpc_release_call(struct rxrpc_sock *, struct rxrpc_call *); -int rxrpc_prepare_call_for_retry(struct rxrpc_sock *, struct rxrpc_call *); void rxrpc_release_calls_on_socket(struct rxrpc_sock *); bool __rxrpc_queue_call(struct rxrpc_call *); bool rxrpc_queue_call(struct rxrpc_call *); diff --git a/net/rxrpc/call_object.c b/net/rxrpc/call_object.c index 8f1a8f85b1f9..8aa2937b069f 100644 --- a/net/rxrpc/call_object.c +++ b/net/rxrpc/call_object.c @@ -324,48 +324,6 @@ error: return ERR_PTR(ret); } -/* - * Retry a call to a new address. It is expected that the Tx queue of the call - * will contain data previously packaged for an old call. - */ -int rxrpc_retry_client_call(struct rxrpc_sock *rx, - struct rxrpc_call *call, - struct rxrpc_conn_parameters *cp, - struct sockaddr_rxrpc *srx, - gfp_t gfp) -{ - const void *here = __builtin_return_address(0); - int ret; - - /* Set up or get a connection record and set the protocol parameters, - * including channel number and call ID. - */ - ret = rxrpc_connect_call(rx, call, cp, srx, gfp); - if (ret < 0) - goto error; - - trace_rxrpc_call(call, rxrpc_call_connected, atomic_read(&call->usage), - here, NULL); - - rxrpc_start_call_timer(call); - - _net("CALL new %d on CONN %d", call->debug_id, call->conn->debug_id); - - if (!test_and_set_bit(RXRPC_CALL_EV_RESEND, &call->events)) - rxrpc_queue_call(call); - - _leave(" = 0"); - return 0; - -error: - rxrpc_set_call_completion(call, RXRPC_CALL_LOCAL_ERROR, - RX_CALL_DEAD, ret); - trace_rxrpc_call(call, rxrpc_call_error, atomic_read(&call->usage), - here, ERR_PTR(ret)); - _leave(" = %d", ret); - return ret; -} - /* * Set up an incoming call. call->conn points to the connection. * This is called in BH context and isn't allowed to fail. @@ -533,61 +491,6 @@ void rxrpc_release_call(struct rxrpc_sock *rx, struct rxrpc_call *call) _leave(""); } -/* - * Prepare a kernel service call for retry. - */ -int rxrpc_prepare_call_for_retry(struct rxrpc_sock *rx, struct rxrpc_call *call) -{ - const void *here = __builtin_return_address(0); - int i; - u8 last = 0; - - _enter("{%d,%d}", call->debug_id, atomic_read(&call->usage)); - - trace_rxrpc_call(call, rxrpc_call_release, atomic_read(&call->usage), - here, (const void *)call->flags); - - ASSERTCMP(call->state, ==, RXRPC_CALL_COMPLETE); - ASSERTCMP(call->completion, !=, RXRPC_CALL_REMOTELY_ABORTED); - ASSERTCMP(call->completion, !=, RXRPC_CALL_LOCALLY_ABORTED); - ASSERT(list_empty(&call->recvmsg_link)); - - del_timer_sync(&call->timer); - - _debug("RELEASE CALL %p (%d CONN %p)", call, call->debug_id, call->conn); - - if (call->conn) - rxrpc_disconnect_call(call); - - if (rxrpc_is_service_call(call) || - !call->tx_phase || - call->tx_hard_ack != 0 || - call->rx_hard_ack != 0 || - call->rx_top != 0) - return -EINVAL; - - call->state = RXRPC_CALL_UNINITIALISED; - call->completion = RXRPC_CALL_SUCCEEDED; - call->call_id = 0; - call->cid = 0; - call->cong_cwnd = 0; - call->cong_extra = 0; - call->cong_ssthresh = 0; - call->cong_mode = 0; - call->cong_dup_acks = 0; - call->cong_cumul_acks = 0; - call->acks_lowest_nak = 0; - - for (i = 0; i < RXRPC_RXTX_BUFF_SIZE; i++) { - last |= call->rxtx_annotations[i]; - call->rxtx_annotations[i] &= RXRPC_TX_ANNO_LAST; - call->rxtx_annotations[i] |= RXRPC_TX_ANNO_RETRANS; - } - - _leave(" = 0"); - return 0; -} - /* * release all the calls associated with a socket */ diff --git a/net/rxrpc/conn_client.c b/net/rxrpc/conn_client.c index 521189f4b666..b2adfa825363 100644 --- a/net/rxrpc/conn_client.c +++ b/net/rxrpc/conn_client.c @@ -562,10 +562,7 @@ static void rxrpc_activate_one_channel(struct rxrpc_connection *conn, clear_bit(RXRPC_CONN_FINAL_ACK_0 + channel, &conn->flags); write_lock_bh(&call->state_lock); - if (!test_bit(RXRPC_CALL_TX_LASTQ, &call->flags)) - call->state = RXRPC_CALL_CLIENT_SEND_REQUEST; - else - call->state = RXRPC_CALL_CLIENT_AWAIT_REPLY; + call->state = RXRPC_CALL_CLIENT_SEND_REQUEST; write_unlock_bh(&call->state_lock); rxrpc_see_call(call); diff --git a/net/rxrpc/sendmsg.c b/net/rxrpc/sendmsg.c index be01f9c5d963..46c9312085b1 100644 --- a/net/rxrpc/sendmsg.c +++ b/net/rxrpc/sendmsg.c @@ -169,10 +169,8 @@ static void rxrpc_queue_packet(struct rxrpc_sock *rx, struct rxrpc_call *call, ASSERTCMP(seq, ==, call->tx_top + 1); - if (last) { + if (last) annotation |= RXRPC_TX_ANNO_LAST; - set_bit(RXRPC_CALL_TX_LASTQ, &call->flags); - } /* We have to set the timestamp before queueing as the retransmit * algorithm can see the packet as soon as we queue it. @@ -386,6 +384,11 @@ static int rxrpc_send_data(struct rxrpc_sock *rx, call->tx_total_len -= copy; } + /* check for the far side aborting the call or a network error + * occurring */ + if (call->state == RXRPC_CALL_COMPLETE) + goto call_terminated; + /* add the packet to the send queue if it's now full */ if (sp->remain <= 0 || (msg_data_left(msg) == 0 && !more)) { @@ -425,16 +428,6 @@ static int rxrpc_send_data(struct rxrpc_sock *rx, notify_end_tx); skb = NULL; } - - /* Check for the far side aborting the call or a network error - * occurring. If this happens, save any packet that was under - * construction so that in the case of a network error, the - * call can be retried or redirected. - */ - if (call->state == RXRPC_CALL_COMPLETE) { - ret = call->error; - goto out; - } } while (msg_data_left(msg) > 0); success: @@ -444,6 +437,11 @@ out: _leave(" = %d", ret); return ret; +call_terminated: + rxrpc_free_skb(skb, rxrpc_skb_tx_freed); + _leave(" = %d", call->error); + return call->error; + maybe_error: if (copied) goto success; -- cgit v1.2.3 From a6c7c7aac2de6be777b9805fe21848b9a323b8ff Mon Sep 17 00:00:00 2001 From: yupeng Date: Fri, 11 Jan 2019 15:07:24 -0800 Subject: net: add document for several snmp counters add document for below counters: TcpEstabResets TcpAttemptFails TcpOutRsts TcpExtTCPSACKDiscard TcpExtTCPDSACKIgnoredOld TcpExtTCPDSACKIgnoredNoUndo TcpExtTCPSackShifted TcpExtTCPSackMerged TcpExtTCPSackShiftFallback TcpExtTCPWantZeroWindowAdv TcpExtTCPToZeroWindowAdv TcpExtTCPFromZeroWindowAdv TcpExtDelayedACKs TcpExtDelayedACKLocked TcpExtDelayedACKLost TcpExtTCPLossProbes TcpExtTCPLossProbeRecovery Signed-off-by: yupeng Signed-off-by: David S. Miller --- Documentation/networking/snmp_counter.rst | 130 ++++++++++++++++++++++++++++-- 1 file changed, 125 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/snmp_counter.rst b/Documentation/networking/snmp_counter.rst index b0dfdaaca512..fe8f741193be 100644 --- a/Documentation/networking/snmp_counter.rst +++ b/Documentation/networking/snmp_counter.rst @@ -336,7 +336,26 @@ time client replies ACK, this socket will get another chance to move to the accept queue. -TCP Fast Open +* TcpEstabResets +Defined in `RFC1213 tcpEstabResets`_. + +.. _RFC1213 tcpEstabResets: https://tools.ietf.org/html/rfc1213#page-48 + +* TcpAttemptFails +Defined in `RFC1213 tcpAttemptFails`_. + +.. _RFC1213 tcpAttemptFails: https://tools.ietf.org/html/rfc1213#page-48 + +* TcpOutRsts +Defined in `RFC1213 tcpOutRsts`_. The RFC says this counter indicates +the 'segments sent containing the RST flag', but in linux kernel, this +couner indicates the segments kerenl tried to send. The sending +process might be failed due to some errors (e.g. memory alloc failed). + +.. _RFC1213 tcpOutRsts: https://tools.ietf.org/html/rfc1213#page-52 + + +TCP Fast Path ============ When kernel receives a TCP packet, it has two paths to handler the packet, one is fast path, another is slow path. The comment in kernel @@ -383,8 +402,6 @@ increase 1. TCP abort ======== - - * TcpExtTCPAbortOnData It means TCP layer has data in flight, but need to close the connection. So TCP layer sends a RST to the other side, indicate the @@ -545,7 +562,6 @@ packet yet, the sender would know packet 4 is out of order. The TCP stack of kernel will increase TcpExtTCPSACKReorder for both of the above scenarios. - DSACK ===== The DSACK is defined in `RFC2883`_. The receiver uses DSACK to report @@ -566,13 +582,63 @@ The TCP stack receives an out of order duplicate packet, so it sends a DSACK to the sender. * TcpExtTCPDSACKRecv -The TCP stack receives a DSACK, which indicate an acknowledged +The TCP stack receives a DSACK, which indicates an acknowledged duplicate packet is received. * TcpExtTCPDSACKOfoRecv The TCP stack receives a DSACK, which indicate an out of order duplicate packet is received. +invalid SACK and DSACK +==================== +When a SACK (or DSACK) block is invalid, a corresponding counter would +be updated. The validation method is base on the start/end sequence +number of the SACK block. For more details, please refer the comment +of the function tcp_is_sackblock_valid in the kernel source code. A +SACK option could have up to 4 blocks, they are checked +individually. E.g., if 3 blocks of a SACk is invalid, the +corresponding counter would be updated 3 times. The comment of the +`Add counters for discarded SACK blocks`_ patch has additional +explaination: + +.. _Add counters for discarded SACK blocks: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=18f02545a9a16c9a89778b91a162ad16d510bb32 + +* TcpExtTCPSACKDiscard +This counter indicates how many SACK blocks are invalid. If the invalid +SACK block is caused by ACK recording, the TCP stack will only ignore +it and won't update this counter. + +* TcpExtTCPDSACKIgnoredOld and TcpExtTCPDSACKIgnoredNoUndo +When a DSACK block is invalid, one of these two counters would be +updated. Which counter will be updated depends on the undo_marker flag +of the TCP socket. If the undo_marker is not set, the TCP stack isn't +likely to re-transmit any packets, and we still receive an invalid +DSACK block, the reason might be that the packet is duplicated in the +middle of the network. In such scenario, TcpExtTCPDSACKIgnoredNoUndo +will be updated. If the undo_marker is set, TcpExtTCPDSACKIgnoredOld +will be updated. As implied in its name, it might be an old packet. + +SACK shift +========= +The linux networking stack stores data in sk_buff struct (skb for +short). If a SACK block acrosses multiple skb, the TCP stack will try +to re-arrange data in these skb. E.g. if a SACK block acknowledges seq +10 to 15, skb1 has seq 10 to 13, skb2 has seq 14 to 20. The seq 14 and +15 in skb2 would be moved to skb1. This operation is 'shift'. If a +SACK block acknowledges seq 10 to 20, skb1 has seq 10 to 13, skb2 has +seq 14 to 20. All data in skb2 will be moved to skb1, and skb2 will be +discard, this operation is 'merge'. + +* TcpExtTCPSackShifted +A skb is shifted + +* TcpExtTCPSackMerged +A skb is merged + +* TcpExtTCPSackShiftFallback +A skb should be shifted or merged, but the TCP stack doesn't do it for +some reasons. + TCP out of order =============== * TcpExtTCPOFOQueue @@ -662,6 +728,60 @@ unacknowledged number (more strict than `RFC 5961 section 5.2`_). .. _RFC 5961 section 4.2: https://tools.ietf.org/html/rfc5961#page-9 .. _RFC 5961 section 5.2: https://tools.ietf.org/html/rfc5961#page-11 +TCP receive window +================= +* TcpExtTCPWantZeroWindowAdv +Depending on current memory usage, the TCP stack tries to set receive +window to zero. But the receive window might still be a no-zero +value. For example, if the previous window size is 10, and the TCP +stack receives 3 bytes, the current window size would be 7 even if the +window size calculated by the memory usage is zero. + +* TcpExtTCPToZeroWindowAdv +The TCP receive window is set to zero from a no-zero value. + +* TcpExtTCPFromZeroWindowAdv +The TCP receive window is set to no-zero value from zero. + + +Delayed ACK +========== +The TCP Delayed ACK is a technique which is used for reducing the +packet count in the network. For more details, please refer the +`Delayed ACK wiki`_ + +.. _Delayed ACK wiki: https://en.wikipedia.org/wiki/TCP_delayed_acknowledgment + +* TcpExtDelayedACKs +A delayed ACK timer expires. The TCP stack will send a pure ACK packet +and exit the delayed ACK mode. + +* TcpExtDelayedACKLocked +A delayed ACK timer expires, but the TCP stack can't send an ACK +immediately due to the socket is locked by a userspace program. The +TCP stack will send a pure ACK later (after the userspace program +unlock the socket). When the TCP stack sends the pure ACK later, the +TCP stack will also update TcpExtDelayedACKs and exit the delayed ACK +mode. + +* TcpExtDelayedACKLost +It will be updated when the TCP stack receives a packet which has been +ACKed. A Delayed ACK loss might cause this issue, but it would also be +triggered by other reasons, such as a packet is duplicated in the +network. + +Tail Loss Probe (TLP) +=================== +TLP is an algorithm which is used to detect TCP packet loss. For more +details, please refer the `TLP paper`_. + +.. _TLP paper: https://tools.ietf.org/html/draft-dukkipati-tcpm-tcp-loss-probe-01 + +* TcpExtTCPLossProbes +A TLP probe packet is sent. + +* TcpExtTCPLossProbeRecovery +A packet loss is detected and recovered by TLP. examples ======= -- cgit v1.2.3 From 890d14d2d4b57ff5a149309da3ed36c8a529987f Mon Sep 17 00:00:00 2001 From: Peter Rosin Date: Wed, 16 Jan 2019 17:42:35 +0100 Subject: fbdev: fbmem: convert CONFIG_FB_LOGO_CENTER into a cmd line option A command line option is much more flexible than a config option and the supporting code is small. Gets rid of #ifdefs in the code too... Suggested-by: Geert Uytterhoeven Cc: Jonathan Corbet Signed-off-by: Peter Rosin Signed-off-by: Bartlomiej Zolnierkiewicz --- Documentation/fb/fbcon.txt | 8 ++++++++ drivers/video/fbdev/core/fbcon.c | 7 +++++++ drivers/video/fbdev/core/fbmem.c | 19 ++++++++++--------- drivers/video/logo/Kconfig | 9 --------- include/linux/fb.h | 1 + 5 files changed, 26 insertions(+), 18 deletions(-) (limited to 'Documentation') diff --git a/Documentation/fb/fbcon.txt b/Documentation/fb/fbcon.txt index 62af30511a95..60a5ec04e8f0 100644 --- a/Documentation/fb/fbcon.txt +++ b/Documentation/fb/fbcon.txt @@ -163,6 +163,14 @@ C. Boot options be preserved until there actually is some text is output to the console. This option causes fbcon to bind immediately to the fbdev device. +7. fbcon=logo-pos: + + The only possible 'location' is 'center' (without quotes), and when + given, the bootup logo is moved from the default top-left corner + location to the center of the framebuffer. If more than one logo is + displayed due to multiple CPUs, the collected line of logos is moved + as a whole. + C. Attaching, Detaching and Unloading Before going on to how to attach, detach and unload the framebuffer console, an diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c index 8976190b6c1f..bfa1360ec750 100644 --- a/drivers/video/fbdev/core/fbcon.c +++ b/drivers/video/fbdev/core/fbcon.c @@ -510,6 +510,13 @@ static int __init fb_console_setup(char *this_opt) continue; } #endif + + if (!strncmp(options, "logo-pos:", 9)) { + options += 9; + if (!strcmp(options, "center")) + fb_center_logo = true; + continue; + } } return 1; } diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c index 558ed2ed3124..cb43a2258c51 100644 --- a/drivers/video/fbdev/core/fbmem.c +++ b/drivers/video/fbdev/core/fbmem.c @@ -53,6 +53,9 @@ EXPORT_SYMBOL(registered_fb); int num_registered_fb __read_mostly; EXPORT_SYMBOL(num_registered_fb); +bool fb_center_logo __read_mostly; +EXPORT_SYMBOL(fb_center_logo); + static struct fb_info *get_fb_info(unsigned int idx) { struct fb_info *fb_info; @@ -506,8 +509,7 @@ static int fb_show_logo_line(struct fb_info *info, int rotate, fb_set_logo(info, logo, logo_new, fb_logo.depth); } -#ifdef CONFIG_FB_LOGO_CENTER - { + if (fb_center_logo) { int xres = info->var.xres; int yres = info->var.yres; @@ -520,11 +522,11 @@ static int fb_show_logo_line(struct fb_info *info, int rotate, --n; image.dx = (xres - n * (logo->width + 8) - 8) / 2; image.dy = y ?: (yres - logo->height) / 2; + } else { + image.dx = 0; + image.dy = y; } -#else - image.dx = 0; - image.dy = y; -#endif + image.width = logo->width; image.height = logo->height; @@ -684,9 +686,8 @@ int fb_prepare_logo(struct fb_info *info, int rotate) } height = fb_logo.logo->height; -#ifdef CONFIG_FB_LOGO_CENTER - height += (yres - fb_logo.logo->height) / 2; -#endif + if (fb_center_logo) + height += (yres - fb_logo.logo->height) / 2; return fb_prepare_extra_logos(info, height, yres); } diff --git a/drivers/video/logo/Kconfig b/drivers/video/logo/Kconfig index 1e972c4e88b1..d1f6196c8b9a 100644 --- a/drivers/video/logo/Kconfig +++ b/drivers/video/logo/Kconfig @@ -10,15 +10,6 @@ menuconfig LOGO if LOGO -config FB_LOGO_CENTER - bool "Center the logo" - depends on FB=y - help - When this option is selected, the bootup logo is centered both - horizontally and vertically. If more than one logo is displayed - due to multiple CPUs, the collected line of logos is centered - as a whole. - config FB_LOGO_EXTRA bool depends on FB=y diff --git a/include/linux/fb.h b/include/linux/fb.h index 7cdd31a69719..f52ef0ad6781 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -653,6 +653,7 @@ extern int fb_new_modelist(struct fb_info *info); extern struct fb_info *registered_fb[FB_MAX]; extern int num_registered_fb; +extern bool fb_center_logo; extern struct class *fb_class; #define for_each_registered_fb(i) \ -- cgit v1.2.3 From 889f4ce60ed19cfd16216e96f90e64a0c1181c0d Mon Sep 17 00:00:00 2001 From: Otto Sabart Date: Wed, 9 Jan 2019 20:07:41 +0100 Subject: doc: gpio-mvebu: fix broken reference to cp110-system-controller0.txt file The cp110-system-controller0.txt file was renamed to cp110-system-controller.txt. Fixes: 4aa5496980e4 ("dt-bindings: cp110: rename cp110 syscon file") Signed-off-by: Otto Sabart Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/gpio/gpio-mvebu.txt | 2 -- 1 file changed, 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt index 38ca2201e8ae..2e097b57f170 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt @@ -14,8 +14,6 @@ Required properties: "marvell,armada-8k-gpio" should be used for the Armada 7K and 8K SoCs (either from AP or CP), see - Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt - and Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt for specific details about the offset property. -- cgit v1.2.3 From 9eac0ae1683575375de8c63166b3596b11d3b56a Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 8 Jan 2019 13:11:40 +0100 Subject: dt-bindings: soc: qcom: Fix trivial language typos Fix few trivial language typos in bindings. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt | 2 +- Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt index 0b8cc533ca83..cf759e5f9b10 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt @@ -55,7 +55,7 @@ of these nodes are defined by the individual bindings for the specific function = EXAMPLE The following example represents the GLINK RPM node on a MSM8996 device, with the function for the "rpm_request" channel defined, which is used for -regualtors and root clocks. +regulators and root clocks. apcs_glb: mailbox@9820000 { compatible = "qcom,msm8996-apcs-hmss-global"; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt index a35af2dafdad..49e1d72d3648 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt @@ -41,12 +41,12 @@ processor ID) and a string identifier. - qcom,local-pid: Usage: required Value type: - Definition: specifies the identfier of the local endpoint of this edge + Definition: specifies the identifier of the local endpoint of this edge - qcom,remote-pid: Usage: required Value type: - Definition: specifies the identfier of the remote endpoint of this edge + Definition: specifies the identifier of the remote endpoint of this edge = SUBNODES Each SMP2P pair contain a set of inbound and outbound entries, these are -- cgit v1.2.3 From f655f8b818684716b2ebe35760c9b96184587d56 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Sat, 12 Jan 2019 12:51:05 -0800 Subject: Documentation: timestamping: correct path to net_tstamp.h net_tstamp.h is an UAPI header, so it was moved under include/uapi. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller --- Documentation/networking/timestamping.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/timestamping.txt b/Documentation/networking/timestamping.txt index 1be0b6f9e0cb..9d1432e0aaa8 100644 --- a/Documentation/networking/timestamping.txt +++ b/Documentation/networking/timestamping.txt @@ -417,7 +417,7 @@ is again deprecated and ts[2] holds a hardware timestamp if set. Hardware time stamping must also be initialized for each device driver that is expected to do hardware time stamping. The parameter is defined in -/include/linux/net_tstamp.h as: +include/uapi/linux/net_tstamp.h as: struct hwtstamp_config { int flags; /* no flags defined right now, must be zero */ @@ -487,7 +487,7 @@ enum { HWTSTAMP_FILTER_PTP_V1_L4_EVENT, /* for the complete list of values, please check - * the include file /include/linux/net_tstamp.h + * the include file include/uapi/linux/net_tstamp.h */ }; -- cgit v1.2.3 From 0e78f389a7cdc6de7dfd0778733f3b140c981c9e Mon Sep 17 00:00:00 2001 From: Otto Sabart Date: Mon, 14 Jan 2019 12:56:36 +0100 Subject: doc: net: fix bad references to network drivers Fix "reference to nonexisting document" warnings. Fixes: b255e500c8dc ("net: documentation: build a directory structure for drivers") Signed-off-by: Otto Sabart Signed-off-by: David S. Miller --- Documentation/networking/index.rst | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index 6a47629ef8ed..59e86de662cd 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -11,19 +11,19 @@ Contents: batman-adv can can_ucan_protocol - dpaa2/index - e100 - e1000 - e1000e - fm10k - igb - igbvf - ixgb - ixgbe - ixgbevf - i40e - iavf - ice + device_drivers/freescale/dpaa2/index + device_drivers/intel/e100 + device_drivers/intel/e1000 + device_drivers/intel/e1000e + device_drivers/intel/fm10k + device_drivers/intel/igb + device_drivers/intel/igbvf + device_drivers/intel/ixgb + device_drivers/intel/ixgbe + device_drivers/intel/ixgbevf + device_drivers/intel/i40e + device_drivers/intel/iavf + device_drivers/intel/ice kapi z8530book msg_zerocopy -- cgit v1.2.3