From a52dede4761885fe292d46e7b66f2755bd5b5430 Mon Sep 17 00:00:00 2001 From: Bingbu Cao Date: Mon, 20 Jan 2020 04:22:21 -0300 Subject: media: ipu3.rst: add imgu pipe config tool link A specific tool which can be used to generate imgu intermedia resolutions now is public on github, this patch adds this information into ipu3.rst. Signed-off-by: Bingbu Cao Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- Documentation/media/v4l-drivers/ipu3.rst | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/media/v4l-drivers/ipu3.rst b/Documentation/media/v4l-drivers/ipu3.rst index e4904ab44e60..a694f49491f9 100644 --- a/Documentation/media/v4l-drivers/ipu3.rst +++ b/Documentation/media/v4l-drivers/ipu3.rst @@ -311,10 +311,13 @@ Down Scaler and GDC blocks should be configured with the supported resolutions as each hardware block has its own alignment requirement. You must configure the output resolution of the hardware blocks smartly to meet -the hardware requirement along with keeping the maximum field of view. -The intermediate resolutions can be generated by specific tool and this -information can be obtained by looking at the following IPU3 ImgU configuration -table. +the hardware requirement along with keeping the maximum field of view. The +intermediate resolutions can be generated by specific tool - + +https://github.com/intel/intel-ipu3-pipecfg + +This tool can be used to generate intermediate resolutions. More information can +be obtained by looking at the following IPU3 ImgU configuration table. https://chromium.googlesource.com/chromiumos/overlays/board-overlays/+/master -- cgit v1.2.3