From e326ce013a8e851193eb337aafb1aa396c533a61 Mon Sep 17 00:00:00 2001 From: Rafael J. Wysocki Date: Fri, 20 Jan 2017 03:25:34 +0100 Subject: Revert "PM / sleep / ACPI: Use the ACPI_FADT_LOW_POWER_S0 flag" Revert commit 08b98d329165 (PM / sleep / ACPI: Use the ACPI_FADT_LOW_POWER_S0 flag) as it caused system suspend (in the default configuration) to fail on Dell XPS13 (9360) with the Kaby Lake processor. Fixes: 08b98d329165 (PM / sleep / ACPI: Use the ACPI_FADT_LOW_POWER_S0 flag) Reported-by: Paul Menzel Signed-off-by: Rafael J. Wysocki --- Documentation/power/states.txt | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/power/states.txt b/Documentation/power/states.txt index 8a39ce45d8a0..008ecb588317 100644 --- a/Documentation/power/states.txt +++ b/Documentation/power/states.txt @@ -35,9 +35,7 @@ only one way to cause the system to go into the Suspend-To-RAM state (write The default suspend mode (ie. the one to be used without writing anything into /sys/power/mem_sleep) is either "deep" (if Suspend-To-RAM is supported) or "s2idle", but it can be overridden by the value of the "mem_sleep_default" -parameter in the kernel command line. On some ACPI-based systems, depending on -the information in the FADT, the default may be "s2idle" even if Suspend-To-RAM -is supported. +parameter in the kernel command line. The properties of all of the sleep states are described below. -- cgit v1.2.3