From e7c881596baf8d1a4a1b872c4670da6723246936 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 6 May 2018 15:39:00 +0200 Subject: ARM: dts: Fix DTC warnings The DTC was warning a lot about unit names etc, I think I fixed them all. Stopping to include skeleton.dtsi fixes the last one. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/gemini-wbd222.dts | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'arch/arm/boot/dts/gemini-wbd222.dts') diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts index 0be867fbfc69..24e6ae3616f7 100644 --- a/arch/arm/boot/dts/gemini-wbd222.dts +++ b/arch/arm/boot/dts/gemini-wbd222.dts @@ -14,7 +14,7 @@ #address-cells = <1>; #size-cells = <1>; - memory { /* 128 MB */ + memory@0 { /* 128 MB */ device_type = "memory"; reg = <0x00000000 0x8000000>; }; @@ -26,10 +26,8 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@5 { + button-setup { debounce-interval = <50>; wakeup-source; linux,code = ; @@ -42,25 +40,25 @@ leds { compatible = "gpio-leds"; - led@1 { + led-red-l3 { label = "wbd111:red:L3"; /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@2 { + led-green-l4 { label = "wbd111:green:L4"; /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@3 { + led-red-l4 { label = "wbd111:red:L4"; /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@5 { + led-green-l3 { label = "wbd111:green:L3"; /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; -- cgit v1.2.3