From 4294f8baaf174c9aa57886e7ed27caf4b02578f6 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 28 Sep 2011 21:25:31 -0500 Subject: ARM: gic: add irq_domain support Convert the gic interrupt controller to use irq domains in preparation for device-tree binding and MULTI_IRQ. This allows for translation between GIC interrupt IDs and Linux irq numbers. The meaning of irq_offset has changed. It now is just the number of skipped GIC interrupt IDs for the controller. It will be 16 for primary GIC and 32 for secondary GICs. Signed-off-by: Rob Herring Cc: Marc Zyngier Reviewed-by: Jamie Iles Tested-by: Thomas Abraham Acked-by: Grant Likely --- arch/arm/common/Kconfig | 1 + arch/arm/common/gic.c | 118 +++++++++++++++++++++++------------------------- 2 files changed, 57 insertions(+), 62 deletions(-) (limited to 'arch/arm/common') diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 4b71766fb21d..74df9ca2be31 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -1,4 +1,5 @@ config ARM_GIC + select IRQ_DOMAIN bool config ARM_VIC diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 016c1aeb847c..ccaa1ab18de7 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -24,11 +24,13 @@ */ #include #include +#include #include #include #include #include #include +#include #include #include #include @@ -75,8 +77,7 @@ static inline void __iomem *gic_cpu_base(struct irq_data *d) static inline unsigned int gic_irq(struct irq_data *d) { - struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); - return d->irq - gic_data->irq_offset; + return d->hwirq; } /* @@ -84,7 +85,7 @@ static inline unsigned int gic_irq(struct irq_data *d) */ static void gic_mask_irq(struct irq_data *d) { - u32 mask = 1 << (d->irq % 32); + u32 mask = 1 << (gic_irq(d) % 32); spin_lock(&irq_controller_lock); writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4); @@ -95,7 +96,7 @@ static void gic_mask_irq(struct irq_data *d) static void gic_unmask_irq(struct irq_data *d) { - u32 mask = 1 << (d->irq % 32); + u32 mask = 1 << (gic_irq(d) % 32); spin_lock(&irq_controller_lock); if (gic_arch_extn.irq_unmask) @@ -176,7 +177,7 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, bool force) { void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3); - unsigned int shift = (d->irq % 4) * 8; + unsigned int shift = (gic_irq(d) % 4) * 8; unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask); u32 val, mask, bit; @@ -227,7 +228,7 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) if (gic_irq == 1023) goto out; - cascade_irq = gic_irq + chip_data->irq_offset; + cascade_irq = irq_domain_to_irq(&chip_data->domain, gic_irq); if (unlikely(gic_irq < 32 || gic_irq > 1020 || cascade_irq >= NR_IRQS)) do_bad_IRQ(cascade_irq, desc); else @@ -259,14 +260,14 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq) irq_set_chained_handler(irq, gic_handle_cascade_irq); } -static void __init gic_dist_init(struct gic_chip_data *gic, - unsigned int irq_start) +static void __init gic_dist_init(struct gic_chip_data *gic) { - unsigned int gic_irqs, irq_limit, i; + unsigned int i, irq; u32 cpumask; + unsigned int gic_irqs = gic->gic_irqs; + struct irq_domain *domain = &gic->domain; void __iomem *base = gic->dist_base; u32 cpu = 0; - u32 nrppis = 0, ppi_base = 0; #ifdef CONFIG_SMP cpu = cpu_logical_map(smp_processor_id()); @@ -278,34 +279,6 @@ static void __init gic_dist_init(struct gic_chip_data *gic, writel_relaxed(0, base + GIC_DIST_CTRL); - /* - * Find out how many interrupts are supported. - * The GIC only supports up to 1020 interrupt sources. - */ - gic_irqs = readl_relaxed(base + GIC_DIST_CTR) & 0x1f; - gic_irqs = (gic_irqs + 1) * 32; - if (gic_irqs > 1020) - gic_irqs = 1020; - - gic->gic_irqs = gic_irqs; - - /* - * Nobody would be insane enough to use PPIs on a secondary - * GIC, right? - */ - if (gic == &gic_data[0]) { - nrppis = (32 - irq_start) & 31; - - /* The GIC only supports up to 16 PPIs. */ - if (nrppis > 16) - BUG(); - - ppi_base = gic->irq_offset + 32 - nrppis; - } - - pr_info("Configuring GIC with %d sources (%d PPIs)\n", - gic_irqs, (gic == &gic_data[0]) ? nrppis : 0); - /* * Set all global interrupts to be level triggered, active low. */ @@ -331,30 +304,21 @@ static void __init gic_dist_init(struct gic_chip_data *gic, for (i = 32; i < gic_irqs; i += 32) writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32); - /* - * Limit number of interrupts registered to the platform maximum - */ - irq_limit = gic->irq_offset + gic_irqs; - if (WARN_ON(irq_limit > NR_IRQS)) - irq_limit = NR_IRQS; - /* * Setup the Linux IRQ subsystem. */ - for (i = 0; i < nrppis; i++) { - int ppi = i + ppi_base; - - irq_set_percpu_devid(ppi); - irq_set_chip_and_handler(ppi, &gic_chip, - handle_percpu_devid_irq); - irq_set_chip_data(ppi, gic); - set_irq_flags(ppi, IRQF_VALID | IRQF_NOAUTOEN); - } - - for (i = irq_start + nrppis; i < irq_limit; i++) { - irq_set_chip_and_handler(i, &gic_chip, handle_fasteoi_irq); - irq_set_chip_data(i, gic); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + irq_domain_for_each_irq(domain, i, irq) { + if (i < 32) { + irq_set_percpu_devid(irq); + irq_set_chip_and_handler(irq, &gic_chip, + handle_percpu_devid_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN); + } else { + irq_set_chip_and_handler(irq, &gic_chip, + handle_fasteoi_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + irq_set_chip_data(irq, gic); } writel_relaxed(1, base + GIC_DIST_CTRL); @@ -566,23 +530,53 @@ static void __init gic_pm_init(struct gic_chip_data *gic) } #endif +const struct irq_domain_ops gic_irq_domain_ops = { +}; + void __init gic_init(unsigned int gic_nr, unsigned int irq_start, void __iomem *dist_base, void __iomem *cpu_base) { struct gic_chip_data *gic; + struct irq_domain *domain; + int gic_irqs; BUG_ON(gic_nr >= MAX_GIC_NR); gic = &gic_data[gic_nr]; + domain = &gic->domain; gic->dist_base = dist_base; gic->cpu_base = cpu_base; - gic->irq_offset = (irq_start - 1) & ~31; - if (gic_nr == 0) + /* + * For primary GICs, skip over SGIs. + * For secondary GICs, skip over PPIs, too. + */ + if (gic_nr == 0) { gic_cpu_base_addr = cpu_base; + domain->hwirq_base = 16; + irq_start = (irq_start & ~31) + 16; + } else + domain->hwirq_base = 32; + + /* + * Find out how many interrupts are supported. + * The GIC only supports up to 1020 interrupt sources. + */ + gic_irqs = readl_relaxed(dist_base + GIC_DIST_CTR) & 0x1f; + gic_irqs = (gic_irqs + 1) * 32; + if (gic_irqs > 1020) + gic_irqs = 1020; + gic->gic_irqs = gic_irqs; + + domain->nr_irq = gic_irqs - domain->hwirq_base; + domain->irq_base = irq_alloc_descs(-1, irq_start, domain->nr_irq, + numa_node_id()); + domain->priv = gic; + domain->ops = &gic_irq_domain_ops; + irq_domain_add(domain); gic_chip.flags |= gic_arch_extn.flags; - gic_dist_init(gic, irq_start); + gic_dist_init(gic); gic_cpu_init(gic); gic_pm_init(gic); } -- cgit v1.2.3