From 265a2bc84247c9b9e3bb4fe275f16ba99551a7e7 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 16 Jul 2012 16:56:15 -0700 Subject: ARM: OMAP3: TWL4030: ensure sys_nirq1 is mux'd and wakeup enabled The SYS_NIRQ1 pin is the interupt line for the PMIC part of the TWL6030 and interrupts from the PMIC are needed as wakeup sources. Ensure this pin is mux'd as input and has wakeup enabled so PMIC interupts (e.g. RTC) can be used as wakeup sources. Tested on 3430/n900, OMAP3530/Overo Fire, 3730/Overo FireSTORM, 3730/Beagle-xM. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/twl-common.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index de47f170ba50..db5ff6642375 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) { + omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(pmic_i2c_board_info.type, pmic_type, sizeof(pmic_i2c_board_info.type)); pmic_i2c_board_info.irq = pmic_irq; -- cgit v1.2.3 From e0e29fd74c3c8bd2ef83bbaa73d528d58a944610 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 7 Aug 2012 11:28:06 -0700 Subject: Revert "ARM: OMAP3: PM: call pre/post transition per powerdomain" This reverts commit 58f0829b7186150318c79515f0e0850c5e7a9c89. Converstion to per-pwrdm per/post transition calls was a bit premature. Only tracking MPU, PER & CORE in the idle path means we lose the accounting for all the other powerdomains which may also transition in idle. On OMAP3, due to autodeps, several powerdomains transition along with MPU (e.g. DSS, USBHOST), and the accounting for these was lost with this patch. Since the accounting includes the context loss counters, drivers for devices in those power domains would never notice context lost, so would likely hang after any off-mode transitions. This patch should be revisited when the upcoming clkdm/pwrmdm/voltdm use-counting seires is merged since then we can properly do accounting without relying on a call in the idle path. In addition, the original patch had another bug because the PER powerdomain accounting was not updated until after the GPIO resume hook is called. Since gpio_resume_after_idle() checks the context loss count (which is not yet updated) it would not properly restore context, leaving the GPIO banks in an undefined state. Cc: Jean Pihet Cc: Tero Kristo Cc: Rajendra Nayak Reported-by: Paul Walmsley Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index e4fc88c65dbd..05bd8f02723f 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -272,21 +272,16 @@ void omap_sram_idle(void) per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(mpu_pwrdm); - pwrdm_pre_transition(neon_pwrdm); - } + pwrdm_pre_transition(NULL); /* PER */ if (per_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(per_pwrdm); per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; omap2_gpio_prepare_for_idle(per_going_off); } /* CORE */ if (core_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(core_pwrdm); if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_cm_save_context(); @@ -339,20 +334,14 @@ void omap_sram_idle(void) omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, OMAP3430_GR_MOD, OMAP3_PRM_VOLTCTRL_OFFSET); - pwrdm_post_transition(core_pwrdm); } omap3_intc_resume_idle(); + pwrdm_post_transition(NULL); + /* PER */ - if (per_next_state < PWRDM_POWER_ON) { + if (per_next_state < PWRDM_POWER_ON) omap2_gpio_resume_after_idle(); - pwrdm_post_transition(per_pwrdm); - } - - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_post_transition(mpu_pwrdm); - pwrdm_post_transition(neon_pwrdm); - } } static void omap3_pm_idle(void) -- cgit v1.2.3 From 5b6e3eb576e8ad03264d46982afed77bdc6323a3 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 9 Aug 2012 12:35:48 +0530 Subject: ARM: OMAP4: sleep: Save the complete used register stack frame OMAP4 sleep entry code even though itself don't use many CPU registers makes call to the v7_flush_dcache_all() which uses them. Since v7_flush_dcache_all() doesn't make use of stack, the caller must take care of the stack frame. Otherwise it will lead to corrupted stack frame. Fix it by saving used registers. Reported-by: Grygorii Strashko Signed-off-by: Santosh Shilimkar Cc: Kevin Hilman Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/sleep44xx.S | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9f6b83d1b193..91e71d8f46f0 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -56,9 +56,13 @@ ppa_por_params: * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. * It returns to the caller for CPU INACTIVE and ON power states or in case * CPU failed to transition to targeted OFF/DORMANT state. + * + * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save + * stack frame and it expects the caller to take care of it. Hence the entire + * stack frame is saved to avoid possible stack corruption. */ ENTRY(omap4_finish_suspend) - stmfd sp!, {lr} + stmfd sp!, {r4-r12, lr} cmp r0, #0x0 beq do_WFI @ No lowpower state, jump to WFI @@ -226,7 +230,7 @@ scu_gp_clear: skip_scu_gp_clear: isb dsb - ldmfd sp!, {pc} + ldmfd sp!, {r4-r12, pc} ENDPROC(omap4_finish_suspend) /* -- cgit v1.2.3 From 196449de0c886e64b48d01bd7ee153656db92884 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 9 Aug 2012 12:38:22 +0530 Subject: ARM: OMAP4: Register the OPP table only for 4430 device The 4430 OPP table was being registered for all other OMAP4 variants too, like 4460 and 4470 causing issues with cpufreq driver enabled. 4460 and 4470 devices have different OPPs as compared to 4430, and they should be populated seperately. As long as that happens, let the OPP table registeration happen only on 4430 device. Signed-off-by: Rajendra Nayak Acked-by: Santosh Shilimkar Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/opp4xxx_data.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index 2293ba27101b..c95415da23c2 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -94,7 +94,7 @@ int __init omap4_opp_init(void) { int r = -ENODEV; - if (!cpu_is_omap44xx()) + if (!cpu_is_omap443x()) return r; r = omap_init_opp_table(omap44xx_opp_def_list, -- cgit v1.2.3