From 7ba8022fc3a1d2434c1f038f022c5d69026319ca Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 5 Mar 2013 11:28:29 +0100 Subject: ARM: exynos: prepare for sparse IRQ When we enable CONFIG_SPARSE_IRQ, we have to set the value of NR_IRQS in the machine_desc for legacy IRQ domains, and any file referring to the number of interrupts or a specific number must include the mach/irqs.h header file explicitly. Signed-off-by: Arnd Bergmann --- arch/arm/plat-samsung/irq-vic-timer.c | 1 + arch/arm/plat-samsung/pm.c | 1 + arch/arm/plat-samsung/s5p-irq.c | 1 + 3 files changed, 3 insertions(+) (limited to 'arch/arm/plat-samsung') diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index f980cf3d2baa..1113066240cf 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -19,6 +19,7 @@ #include #include +#include #include #include #include diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 002b1472293b..53210ec4e8ec 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/plat-samsung/s5p-irq.c b/arch/arm/plat-samsung/s5p-irq.c index 103e371f5e35..ff1a76011b1e 100644 --- a/arch/arm/plat-samsung/s5p-irq.c +++ b/arch/arm/plat-samsung/s5p-irq.c @@ -15,6 +15,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3 From a2e407104769d64e01556d4c335bb6478e1e7f3c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 4 Mar 2013 18:03:10 +0100 Subject: ARM: exynos: move debug-macro.S to include/debug/ The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann --- arch/arm/Kconfig.debug | 8 +++ arch/arm/include/debug/exynos.S | 39 +++++++++++ arch/arm/include/debug/samsung.S | 87 ++++++++++++++++++++++++ arch/arm/mach-exynos/include/mach/debug-macro.S | 39 ----------- arch/arm/mach-s3c24xx/include/mach/debug-macro.S | 2 +- arch/arm/mach-s3c64xx/include/mach/debug-macro.S | 2 +- arch/arm/mach-s5p64x0/include/mach/debug-macro.S | 2 +- arch/arm/mach-s5pc100/include/mach/debug-macro.S | 2 +- arch/arm/mach-s5pv210/include/mach/debug-macro.S | 2 +- arch/arm/plat-samsung/include/plat/debug-macro.S | 87 ------------------------ 10 files changed, 139 insertions(+), 131 deletions(-) create mode 100644 arch/arm/include/debug/exynos.S create mode 100644 arch/arm/include/debug/samsung.S delete mode 100644 arch/arm/mach-exynos/include/mach/debug-macro.S delete mode 100644 arch/arm/plat-samsung/include/plat/debug-macro.S (limited to 'arch/arm/plat-samsung') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 9b31f4311ea2..59ce26afdcc5 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -330,6 +330,7 @@ choice config DEBUG_S3C_UART0 depends on PLAT_SAMSUNG + select DEBUG_EXYNOS_UART if ARCH_EXYNOS bool "Use S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -341,6 +342,7 @@ choice config DEBUG_S3C_UART1 depends on PLAT_SAMSUNG + select DEBUG_EXYNOS_UART if ARCH_EXYNOS bool "Use S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -352,6 +354,7 @@ choice config DEBUG_S3C_UART2 depends on PLAT_SAMSUNG + select DEBUG_EXYNOS_UART if ARCH_EXYNOS bool "Use S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -363,6 +366,7 @@ choice config DEBUG_S3C_UART3 depends on PLAT_SAMSUNG && ARCH_EXYNOS + select DEBUG_EXYNOS_UART bool "Use S3C UART 3 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -485,6 +489,9 @@ choice endchoice +config DEBUG_EXYNOS_UART + bool + config DEBUG_IMX_UART_PORT int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ @@ -580,6 +587,7 @@ endchoice config DEBUG_LL_INCLUDE string + default "debug/exynos.S" if DEBUG_EXYNOS_UART default "debug/icedcc.S" if DEBUG_ICEDCC default "debug/imx.S" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ diff --git a/arch/arm/include/debug/exynos.S b/arch/arm/include/debug/exynos.S new file mode 100644 index 000000000000..b17fdb7fbd34 --- /dev/null +++ b/arch/arm/include/debug/exynos.S @@ -0,0 +1,39 @@ +/* + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* pull in the relevant register and map files. */ + +#define S3C_ADDR_BASE 0xF6000000 +#define S3C_VA_UART S3C_ADDR_BASE + 0x01000000 +#define EXYNOS4_PA_UART 0x13800000 +#define EXYNOS5_PA_UART 0x12C00000 + + /* note, for the boot process to work we have to keep the UART + * virtual address aligned to an 1MiB boundary for the L1 + * mapping the head code makes. We keep the UART virtual address + * aligned and add in the offset when we load the value here. + */ + + .macro addruart, rp, rv, tmp + mrc p15, 0, \tmp, c0, c0, 0 + and \tmp, \tmp, #0xf0 + teq \tmp, #0xf0 @@ A15 + ldreq \rp, =EXYNOS5_PA_UART + movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4 + ldr \rv, =S3C_VA_UART +#if CONFIG_DEBUG_S3C_UART != 0 + add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART) +#endif + .endm + +#define fifo_full fifo_full_s5pv210 +#define fifo_level fifo_level_s5pv210 + +#include diff --git a/arch/arm/include/debug/samsung.S b/arch/arm/include/debug/samsung.S new file mode 100644 index 000000000000..f3a9cff6d5d4 --- /dev/null +++ b/arch/arm/include/debug/samsung.S @@ -0,0 +1,87 @@ +/* arch/arm/plat-samsung/include/plat/debug-macro.S + * + * Copyright 2005, 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include + +/* The S5PV210/S5PC110 implementations are as belows. */ + + .macro fifo_level_s5pv210 rd, rx + ldr \rd, [\rx, # S3C2410_UFSTAT] + and \rd, \rd, #S5PV210_UFSTAT_TXMASK + .endm + + .macro fifo_full_s5pv210 rd, rx + ldr \rd, [\rx, # S3C2410_UFSTAT] + tst \rd, #S5PV210_UFSTAT_TXFULL + .endm + +/* The S3C2440 implementations are used by default as they are the + * most widely re-used */ + + .macro fifo_level_s3c2440 rd, rx + ldr \rd, [\rx, # S3C2410_UFSTAT] + and \rd, \rd, #S3C2440_UFSTAT_TXMASK + .endm + +#ifndef fifo_level +#define fifo_level fifo_level_s3c2440 +#endif + + .macro fifo_full_s3c2440 rd, rx + ldr \rd, [\rx, # S3C2410_UFSTAT] + tst \rd, #S3C2440_UFSTAT_TXFULL + .endm + +#ifndef fifo_full +#define fifo_full fifo_full_s3c2440 +#endif + + .macro senduart,rd,rx + strb \rd, [\rx, # S3C2410_UTXH] + .endm + + .macro busyuart, rd, rx + ldr \rd, [\rx, # S3C2410_UFCON] + tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? + beq 1001f @ + @ FIFO enabled... +1003: + fifo_full \rd, \rx + bne 1003b + b 1002f + +1001: + @ busy waiting for non fifo + ldr \rd, [\rx, # S3C2410_UTRSTAT] + tst \rd, #S3C2410_UTRSTAT_TXFE + beq 1001b + +1002: @ exit busyuart + .endm + + .macro waituart,rd,rx + ldr \rd, [\rx, # S3C2410_UFCON] + tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? + beq 1001f @ + @ FIFO enabled... +1003: + fifo_level \rd, \rx + teq \rd, #0 + bne 1003b + b 1002f +1001: + @ idle waiting for non fifo + ldr \rd, [\rx, # S3C2410_UTRSTAT] + tst \rd, #S3C2410_UTRSTAT_TXFE + beq 1001b + +1002: @ exit busyuart + .endm diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-exynos/include/mach/debug-macro.S deleted file mode 100644 index e0c86ea475e7..000000000000 --- a/arch/arm/mach-exynos/include/mach/debug-macro.S +++ /dev/null @@ -1,39 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/debug-macro.S - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include - - /* note, for the boot process to work we have to keep the UART - * virtual address aligned to an 1MiB boundary for the L1 - * mapping the head code makes. We keep the UART virtual address - * aligned and add in the offset when we load the value here. - */ - - .macro addruart, rp, rv, tmp - mrc p15, 0, \tmp, c0, c0, 0 - and \tmp, \tmp, #0xf0 - teq \tmp, #0xf0 @@ A15 - ldreq \rp, =EXYNOS5_PA_UART - movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4 - ldr \rv, =S3C_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -#define fifo_full fifo_full_s5pv210 -#define fifo_level fifo_level_s5pv210 - -#include diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S index 13ed33c69113..2558952e3147 100644 --- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S @@ -98,4 +98,4 @@ /* include the reset of the code which will do the work */ -#include +#include diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S index c0c076a90f27..dd9ccca5de1f 100644 --- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S @@ -35,4 +35,4 @@ * will be fine with us. */ -#include +#include diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S index e80ba3c69814..5e2916fb19a9 100644 --- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S +++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S @@ -30,4 +30,4 @@ #endif .endm -#include +#include diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S index 694f75937000..66cb7f16bf2a 100644 --- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S @@ -36,4 +36,4 @@ * will be fine with us. */ -#include +#include diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S index 79e55597ab63..80c21996c943 100644 --- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S @@ -38,4 +38,4 @@ * will be fine with us. */ -#include +#include diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S deleted file mode 100644 index f3a9cff6d5d4..000000000000 --- a/arch/arm/plat-samsung/include/plat/debug-macro.S +++ /dev/null @@ -1,87 +0,0 @@ -/* arch/arm/plat-samsung/include/plat/debug-macro.S - * - * Copyright 2005, 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include - -/* The S5PV210/S5PC110 implementations are as belows. */ - - .macro fifo_level_s5pv210 rd, rx - ldr \rd, [\rx, # S3C2410_UFSTAT] - and \rd, \rd, #S5PV210_UFSTAT_TXMASK - .endm - - .macro fifo_full_s5pv210 rd, rx - ldr \rd, [\rx, # S3C2410_UFSTAT] - tst \rd, #S5PV210_UFSTAT_TXFULL - .endm - -/* The S3C2440 implementations are used by default as they are the - * most widely re-used */ - - .macro fifo_level_s3c2440 rd, rx - ldr \rd, [\rx, # S3C2410_UFSTAT] - and \rd, \rd, #S3C2440_UFSTAT_TXMASK - .endm - -#ifndef fifo_level -#define fifo_level fifo_level_s3c2440 -#endif - - .macro fifo_full_s3c2440 rd, rx - ldr \rd, [\rx, # S3C2410_UFSTAT] - tst \rd, #S3C2440_UFSTAT_TXFULL - .endm - -#ifndef fifo_full -#define fifo_full fifo_full_s3c2440 -#endif - - .macro senduart,rd,rx - strb \rd, [\rx, # S3C2410_UTXH] - .endm - - .macro busyuart, rd, rx - ldr \rd, [\rx, # S3C2410_UFCON] - tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? - beq 1001f @ - @ FIFO enabled... -1003: - fifo_full \rd, \rx - bne 1003b - b 1002f - -1001: - @ busy waiting for non fifo - ldr \rd, [\rx, # S3C2410_UTRSTAT] - tst \rd, #S3C2410_UTRSTAT_TXFE - beq 1001b - -1002: @ exit busyuart - .endm - - .macro waituart,rd,rx - ldr \rd, [\rx, # S3C2410_UFCON] - tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? - beq 1001f @ - @ FIFO enabled... -1003: - fifo_level \rd, \rx - teq \rd, #0 - bne 1003b - b 1002f -1001: - @ idle waiting for non fifo - ldr \rd, [\rx, # S3C2410_UTRSTAT] - tst \rd, #S3C2410_UTRSTAT_TXFE - beq 1001b - -1002: @ exit busyuart - .endm -- cgit v1.2.3 From f76da510d61a8793c990bee9acc10744ee2b2a8c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 10 Apr 2013 14:49:03 +0200 Subject: ARM: samsung: move mfc device definition to s5p-dev-mfc.c For a DT-only build we don't want to compile devs.c, but we do need the mfc device, which is also referenced by the DT based platforms, so move it all into one place. Signed-off-by: Arnd Bergmann --- arch/arm/plat-samsung/devs.c | 45 ------------------------------------- arch/arm/plat-samsung/s5p-dev-mfc.c | 42 +++++++++++++++++++++++++++++++++- 2 files changed, 41 insertions(+), 46 deletions(-) (limited to 'arch/arm/plat-samsung') diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 51afedda9ab6..de9ad27495e7 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -878,51 +878,6 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) } #endif /* CONFIG_PLAT_S3C24XX */ -/* MFC */ - -#ifdef CONFIG_S5P_DEV_MFC -static struct resource s5p_mfc_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K), - [1] = DEFINE_RES_IRQ(IRQ_MFC), -}; - -struct platform_device s5p_device_mfc = { - .name = "s5p-mfc", - .id = -1, - .num_resources = ARRAY_SIZE(s5p_mfc_resource), - .resource = s5p_mfc_resource, -}; - -/* - * MFC hardware has 2 memory interfaces which are modelled as two separate - * platform devices to let dma-mapping distinguish between them. - * - * MFC parent device (s5p_device_mfc) must be registered before memory - * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r). - */ - -struct platform_device s5p_device_mfc_l = { - .name = "s5p-mfc-l", - .id = -1, - .dev = { - .parent = &s5p_device_mfc.dev, - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -struct platform_device s5p_device_mfc_r = { - .name = "s5p-mfc-r", - .id = -1, - .dev = { - .parent = &s5p_device_mfc.dev, - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -#endif /* CONFIG_S5P_DEV_MFC */ - /* MIPI CSIS */ #ifdef CONFIG_S5P_DEV_CSIS0 diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c index 5ec104b5408b..a93fb6fb6606 100644 --- a/arch/arm/plat-samsung/s5p-dev-mfc.c +++ b/arch/arm/plat-samsung/s5p-dev-mfc.c @@ -18,10 +18,50 @@ #include #include +#include #include -#include #include +static struct resource s5p_mfc_resource[] = { + [0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_MFC), +}; + +struct platform_device s5p_device_mfc = { + .name = "s5p-mfc", + .id = -1, + .num_resources = ARRAY_SIZE(s5p_mfc_resource), + .resource = s5p_mfc_resource, +}; + +/* + * MFC hardware has 2 memory interfaces which are modelled as two separate + * platform devices to let dma-mapping distinguish between them. + * + * MFC parent device (s5p_device_mfc) must be registered before memory + * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r). + */ + +struct platform_device s5p_device_mfc_l = { + .name = "s5p-mfc-l", + .id = -1, + .dev = { + .parent = &s5p_device_mfc.dev, + .dma_mask = &s5p_device_mfc_l.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct platform_device s5p_device_mfc_r = { + .name = "s5p-mfc-r", + .id = -1, + .dev = { + .parent = &s5p_device_mfc.dev, + .dma_mask = &s5p_device_mfc_r.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + struct s5p_mfc_reserved_mem { phys_addr_t base; unsigned long size; -- cgit v1.2.3 From cc014f3e29e15140e35e14fa194034baee92df2a Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 4 Mar 2013 18:28:21 +0100 Subject: mmc: sdhci-s3c: remove platform dependencies plat/regs-sdhci.h is not used anywhere but in the sdhci-s3c driver, so it can become a local file there and all other inclusions removed. plat/sdhci.h is used only to define the platform devices, and with the exception of the platform_data structure not needed by the driver, so we can split out the platform_data definition instead and leave the rest to platform code. Signed-off-by: Arnd Bergmann Acked-by: Chris Ball --- arch/arm/mach-exynos/setup-sdhci-gpio.c | 2 +- arch/arm/mach-s5pc100/setup-sdhci-gpio.c | 1 - arch/arm/mach-s5pv210/setup-sdhci-gpio.c | 1 - arch/arm/plat-samsung/include/plat/regs-sdhci.h | 87 ------------------------- arch/arm/plat-samsung/include/plat/sdhci.h | 56 +--------------- drivers/mmc/host/Kconfig | 2 +- drivers/mmc/host/sdhci-s3c-regs.h | 87 +++++++++++++++++++++++++ drivers/mmc/host/sdhci-s3c.c | 5 +- include/linux/platform_data/mmc-sdhci-s3c.h | 56 ++++++++++++++++ 9 files changed, 148 insertions(+), 149 deletions(-) delete mode 100644 arch/arm/plat-samsung/include/plat/regs-sdhci.h create mode 100644 drivers/mmc/host/sdhci-s3c-regs.h create mode 100644 include/linux/platform_data/mmc-sdhci-s3c.h (limited to 'arch/arm/plat-samsung') diff --git a/arch/arm/mach-exynos/setup-sdhci-gpio.c b/arch/arm/mach-exynos/setup-sdhci-gpio.c index e8d08bf8965a..d5b98c866738 100644 --- a/arch/arm/mach-exynos/setup-sdhci-gpio.c +++ b/arch/arm/mach-exynos/setup-sdhci-gpio.c @@ -19,8 +19,8 @@ #include #include +#include #include -#include #include void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c index 03c02d04c68c..6010c0310cb5 100644 --- a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c @@ -19,7 +19,6 @@ #include #include -#include #include void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c index 3e3ac05bb7b1..0512ada00522 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c @@ -20,7 +20,6 @@ #include #include -#include #include void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) diff --git a/arch/arm/plat-samsung/include/plat/regs-sdhci.h b/arch/arm/plat-samsung/include/plat/regs-sdhci.h deleted file mode 100644 index e34049ad44cc..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-sdhci.h +++ /dev/null @@ -1,87 +0,0 @@ -/* linux/arch/arm/plat-s3c/include/plat/regs-sdhci.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C Platform - SDHCI (HSMMC) register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_S3C_SDHCI_REGS_H -#define __PLAT_S3C_SDHCI_REGS_H __FILE__ - -#define S3C_SDHCI_CONTROL2 (0x80) -#define S3C_SDHCI_CONTROL3 (0x84) -#define S3C64XX_SDHCI_CONTROL4 (0x8C) - -#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31) -#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK (1 << 30) -#define S3C_SDHCI_CTRL2_CDINVRXD3 (1 << 29) -#define S3C_SDHCI_CTRL2_SLCARDOUT (1 << 28) - -#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24) -#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT (24) -#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24) - -#define S3C_SDHCI_CTRL2_LVLDAT_MASK (0xff << 16) -#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT (16) -#define S3C_SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16) - -#define S3C_SDHCI_CTRL2_ENFBCLKTX (1 << 15) -#define S3C_SDHCI_CTRL2_ENFBCLKRX (1 << 14) -#define S3C_SDHCI_CTRL2_SDCDSEL (1 << 13) -#define S3C_SDHCI_CTRL2_SDSIGPC (1 << 12) -#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11) - -#define S3C_SDHCI_CTRL2_DFCNT_MASK (0x3 << 9) -#define S3C_SDHCI_CTRL2_DFCNT_SHIFT (9) -#define S3C_SDHCI_CTRL2_DFCNT_NONE (0x0 << 9) -#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK (0x1 << 9) -#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK (0x2 << 9) -#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK (0x3 << 9) - -#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8) -#define S3C_SDHCI_CTRL2_RWAITMODE (1 << 7) -#define S3C_SDHCI_CTRL2_DISBUFRD (1 << 6) -#define S3C_SDHCI_CTRL2_SELBASECLK_MASK (0x3 << 4) -#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT (4) -#define S3C_SDHCI_CTRL2_PWRSYNC (1 << 3) -#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1) -#define S3C_SDHCI_CTRL2_HWINITFIN (1 << 0) - -#define S3C_SDHCI_CTRL3_FCSEL3 (1 << 31) -#define S3C_SDHCI_CTRL3_FCSEL2 (1 << 23) -#define S3C_SDHCI_CTRL3_FCSEL1 (1 << 15) -#define S3C_SDHCI_CTRL3_FCSEL0 (1 << 7) - -#define S3C_SDHCI_CTRL3_FIA3_MASK (0x7f << 24) -#define S3C_SDHCI_CTRL3_FIA3_SHIFT (24) -#define S3C_SDHCI_CTRL3_FIA3(_x) ((_x) << 24) - -#define S3C_SDHCI_CTRL3_FIA2_MASK (0x7f << 16) -#define S3C_SDHCI_CTRL3_FIA2_SHIFT (16) -#define S3C_SDHCI_CTRL3_FIA2(_x) ((_x) << 16) - -#define S3C_SDHCI_CTRL3_FIA1_MASK (0x7f << 8) -#define S3C_SDHCI_CTRL3_FIA1_SHIFT (8) -#define S3C_SDHCI_CTRL3_FIA1(_x) ((_x) << 8) - -#define S3C_SDHCI_CTRL3_FIA0_MASK (0x7f << 0) -#define S3C_SDHCI_CTRL3_FIA0_SHIFT (0) -#define S3C_SDHCI_CTRL3_FIA0(_x) ((_x) << 0) - -#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK (0x3 << 16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT (16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA (0x0 << 16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA (0x1 << 16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA (0x2 << 16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA (0x3 << 16) - -#define S3C64XX_SDHCI_CONTROL4_BUSY (1) - -#endif /* __PLAT_S3C_SDHCI_REGS_H */ diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 9b87f38fc4f4..1e0aab08c13f 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -18,62 +18,9 @@ #ifndef __PLAT_S3C_SDHCI_H #define __PLAT_S3C_SDHCI_H __FILE__ +#include #include -struct platform_device; -struct mmc_host; -struct mmc_card; -struct mmc_ios; - -enum cd_types { - S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */ - S3C_SDHCI_CD_EXTERNAL, /* use external callback */ - S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */ - S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */ - S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */ -}; - -/** - * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI - * @max_width: The maximum number of data bits supported. - * @host_caps: Standard MMC host capabilities bit field. - * @host_caps2: The second standard MMC host capabilities bit field. - * @cd_type: Type of Card Detection method (see cd_types enum above) - * @ext_cd_init: Initialize external card detect subsystem. Called on - * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL. - * notify_func argument is a callback to the sdhci-s3c driver - * that triggers the card detection event. Callback arguments: - * dev is pointer to platform device of the host controller, - * state is new state of the card (0 - removed, 1 - inserted). - * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on - * sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL. - * notify_func argument is the same callback as for ext_cd_init. - * @ext_cd_gpio: gpio pin used for external CD line, valid only if - * cd_type == S3C_SDHCI_CD_GPIO - * @ext_cd_gpio_invert: invert values for external CD gpio line - * @cfg_gpio: Configure the GPIO for a specific card bit-width - * - * Initialisation data specific to either the machine or the platform - * for the device driver to use or call-back when configuring gpio or - * card speed information. -*/ -struct s3c_sdhci_platdata { - unsigned int max_width; - unsigned int host_caps; - unsigned int host_caps2; - unsigned int pm_caps; - enum cd_types cd_type; - - int ext_cd_gpio; - bool ext_cd_gpio_invert; - int (*ext_cd_init)(void (*notify_func)(struct platform_device *, - int state)); - int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *, - int state)); - - void (*cfg_gpio)(struct platform_device *dev, int width); -}; - /* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data * @pd: The default platform data for this device. * @set: Pointer to the platform data to fill in. @@ -378,5 +325,4 @@ static inline void s3c_sdhci_setname(int id, char *name) break; } } - #endif /* __PLAT_S3C_SDHCI_H */ diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index d88219e1d86e..d0547448606d 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -180,7 +180,7 @@ config MMC_SDHCI_TEGRA config MMC_SDHCI_S3C tristate "SDHCI support on Samsung S3C SoC" - depends on MMC_SDHCI && PLAT_SAMSUNG + depends on MMC_SDHCI && PLAT_SAMSUNG_SINGLE help This selects the Secure Digital Host Controller Interface (SDHCI) often referrered to as the HSMMC block in some of the Samsung S3C diff --git a/drivers/mmc/host/sdhci-s3c-regs.h b/drivers/mmc/host/sdhci-s3c-regs.h new file mode 100644 index 000000000000..e34049ad44cc --- /dev/null +++ b/drivers/mmc/host/sdhci-s3c-regs.h @@ -0,0 +1,87 @@ +/* linux/arch/arm/plat-s3c/include/plat/regs-sdhci.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C Platform - SDHCI (HSMMC) register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_S3C_SDHCI_REGS_H +#define __PLAT_S3C_SDHCI_REGS_H __FILE__ + +#define S3C_SDHCI_CONTROL2 (0x80) +#define S3C_SDHCI_CONTROL3 (0x84) +#define S3C64XX_SDHCI_CONTROL4 (0x8C) + +#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31) +#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK (1 << 30) +#define S3C_SDHCI_CTRL2_CDINVRXD3 (1 << 29) +#define S3C_SDHCI_CTRL2_SLCARDOUT (1 << 28) + +#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24) +#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT (24) +#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24) + +#define S3C_SDHCI_CTRL2_LVLDAT_MASK (0xff << 16) +#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT (16) +#define S3C_SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16) + +#define S3C_SDHCI_CTRL2_ENFBCLKTX (1 << 15) +#define S3C_SDHCI_CTRL2_ENFBCLKRX (1 << 14) +#define S3C_SDHCI_CTRL2_SDCDSEL (1 << 13) +#define S3C_SDHCI_CTRL2_SDSIGPC (1 << 12) +#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11) + +#define S3C_SDHCI_CTRL2_DFCNT_MASK (0x3 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_SHIFT (9) +#define S3C_SDHCI_CTRL2_DFCNT_NONE (0x0 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK (0x1 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK (0x2 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK (0x3 << 9) + +#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8) +#define S3C_SDHCI_CTRL2_RWAITMODE (1 << 7) +#define S3C_SDHCI_CTRL2_DISBUFRD (1 << 6) +#define S3C_SDHCI_CTRL2_SELBASECLK_MASK (0x3 << 4) +#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT (4) +#define S3C_SDHCI_CTRL2_PWRSYNC (1 << 3) +#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1) +#define S3C_SDHCI_CTRL2_HWINITFIN (1 << 0) + +#define S3C_SDHCI_CTRL3_FCSEL3 (1 << 31) +#define S3C_SDHCI_CTRL3_FCSEL2 (1 << 23) +#define S3C_SDHCI_CTRL3_FCSEL1 (1 << 15) +#define S3C_SDHCI_CTRL3_FCSEL0 (1 << 7) + +#define S3C_SDHCI_CTRL3_FIA3_MASK (0x7f << 24) +#define S3C_SDHCI_CTRL3_FIA3_SHIFT (24) +#define S3C_SDHCI_CTRL3_FIA3(_x) ((_x) << 24) + +#define S3C_SDHCI_CTRL3_FIA2_MASK (0x7f << 16) +#define S3C_SDHCI_CTRL3_FIA2_SHIFT (16) +#define S3C_SDHCI_CTRL3_FIA2(_x) ((_x) << 16) + +#define S3C_SDHCI_CTRL3_FIA1_MASK (0x7f << 8) +#define S3C_SDHCI_CTRL3_FIA1_SHIFT (8) +#define S3C_SDHCI_CTRL3_FIA1(_x) ((_x) << 8) + +#define S3C_SDHCI_CTRL3_FIA0_MASK (0x7f << 0) +#define S3C_SDHCI_CTRL3_FIA0_SHIFT (0) +#define S3C_SDHCI_CTRL3_FIA0(_x) ((_x) << 0) + +#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK (0x3 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT (16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA (0x0 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA (0x1 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA (0x2 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA (0x3 << 16) + +#define S3C64XX_SDHCI_CONTROL4_BUSY (1) + +#endif /* __PLAT_S3C_SDHCI_REGS_H */ diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index 7363efe72287..e4f52b5c2592 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -28,9 +29,7 @@ #include -#include -#include - +#include "sdhci-s3c-regs.h" #include "sdhci.h" #define MAX_BUS_CLK (4) diff --git a/include/linux/platform_data/mmc-sdhci-s3c.h b/include/linux/platform_data/mmc-sdhci-s3c.h new file mode 100644 index 000000000000..249f02387a35 --- /dev/null +++ b/include/linux/platform_data/mmc-sdhci-s3c.h @@ -0,0 +1,56 @@ +#ifndef __PLATFORM_DATA_SDHCI_S3C_H +#define __PLATFORM_DATA_SDHCI_S3C_H + +struct platform_device; + +enum cd_types { + S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */ + S3C_SDHCI_CD_EXTERNAL, /* use external callback */ + S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */ + S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */ + S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */ +}; + +/** + * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI + * @max_width: The maximum number of data bits supported. + * @host_caps: Standard MMC host capabilities bit field. + * @host_caps2: The second standard MMC host capabilities bit field. + * @cd_type: Type of Card Detection method (see cd_types enum above) + * @ext_cd_init: Initialize external card detect subsystem. Called on + * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL. + * notify_func argument is a callback to the sdhci-s3c driver + * that triggers the card detection event. Callback arguments: + * dev is pointer to platform device of the host controller, + * state is new state of the card (0 - removed, 1 - inserted). + * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on + * sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL. + * notify_func argument is the same callback as for ext_cd_init. + * @ext_cd_gpio: gpio pin used for external CD line, valid only if + * cd_type == S3C_SDHCI_CD_GPIO + * @ext_cd_gpio_invert: invert values for external CD gpio line + * @cfg_gpio: Configure the GPIO for a specific card bit-width + * + * Initialisation data specific to either the machine or the platform + * for the device driver to use or call-back when configuring gpio or + * card speed information. +*/ +struct s3c_sdhci_platdata { + unsigned int max_width; + unsigned int host_caps; + unsigned int host_caps2; + unsigned int pm_caps; + enum cd_types cd_type; + + int ext_cd_gpio; + bool ext_cd_gpio_invert; + int (*ext_cd_init)(void (*notify_func)(struct platform_device *, + int state)); + int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *, + int state)); + + void (*cfg_gpio)(struct platform_device *dev, int width); +}; + + +#endif /* __PLATFORM_DATA_SDHCI_S3C_H */ -- cgit v1.2.3 From 93115b7fa8f4090ecbf247b29992a9454d4f9c22 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 5 Mar 2013 12:14:17 +0100 Subject: mtd: onenand/samsung: make regs-onenand.h file local Nothing uses the NAND register definitions other than the actual driver, so we can move the header file into the same local directory, which lets us build it in a multiplatform configuration. Signed-off-by: Arnd Bergmann Acked-by: Kyungmin Park Cc: linux-mtd@lists.infradead.org Cc: David Woodhouse --- arch/arm/plat-samsung/include/plat/regs-onenand.h | 63 ----------------------- drivers/mtd/onenand/samsung.c | 4 +- drivers/mtd/onenand/samsung.h | 61 ++++++++++++++++++++++ 3 files changed, 63 insertions(+), 65 deletions(-) delete mode 100644 arch/arm/plat-samsung/include/plat/regs-onenand.h create mode 100644 drivers/mtd/onenand/samsung.h (limited to 'arch/arm/plat-samsung') diff --git a/arch/arm/plat-samsung/include/plat/regs-onenand.h b/arch/arm/plat-samsung/include/plat/regs-onenand.h deleted file mode 100644 index 930ea8b88ed3..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-onenand.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * linux/arch/arm/plat-s3c/include/plat/regs-onenand.h - * - * Copyright (C) 2008-2010 Samsung Electronics - * Kyungmin Park - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __SAMSUNG_ONENAND_H__ -#define __SAMSUNG_ONENAND_H__ - -#include - -/* - * OneNAND Controller - */ -#define MEM_CFG_OFFSET 0x0000 -#define BURST_LEN_OFFSET 0x0010 -#define MEM_RESET_OFFSET 0x0020 -#define INT_ERR_STAT_OFFSET 0x0030 -#define INT_ERR_MASK_OFFSET 0x0040 -#define INT_ERR_ACK_OFFSET 0x0050 -#define ECC_ERR_STAT_OFFSET 0x0060 -#define MANUFACT_ID_OFFSET 0x0070 -#define DEVICE_ID_OFFSET 0x0080 -#define DATA_BUF_SIZE_OFFSET 0x0090 -#define BOOT_BUF_SIZE_OFFSET 0x00A0 -#define BUF_AMOUNT_OFFSET 0x00B0 -#define TECH_OFFSET 0x00C0 -#define FBA_WIDTH_OFFSET 0x00D0 -#define FPA_WIDTH_OFFSET 0x00E0 -#define FSA_WIDTH_OFFSET 0x00F0 -#define TRANS_SPARE_OFFSET 0x0140 -#define DBS_DFS_WIDTH_OFFSET 0x0160 -#define INT_PIN_ENABLE_OFFSET 0x01A0 -#define ACC_CLOCK_OFFSET 0x01C0 -#define FLASH_VER_ID_OFFSET 0x01F0 -#define FLASH_AUX_CNTRL_OFFSET 0x0300 /* s3c64xx only */ - -#define ONENAND_MEM_RESET_HOT 0x3 -#define ONENAND_MEM_RESET_COLD 0x2 -#define ONENAND_MEM_RESET_WARM 0x1 - -#define CACHE_OP_ERR (1 << 13) -#define RST_CMP (1 << 12) -#define RDY_ACT (1 << 11) -#define INT_ACT (1 << 10) -#define UNSUP_CMD (1 << 9) -#define LOCKED_BLK (1 << 8) -#define BLK_RW_CMP (1 << 7) -#define ERS_CMP (1 << 6) -#define PGM_CMP (1 << 5) -#define LOAD_CMP (1 << 4) -#define ERS_FAIL (1 << 3) -#define PGM_FAIL (1 << 2) -#define INT_TO (1 << 1) -#define LD_FAIL_ECC_ERR (1 << 0) - -#define TSRF (1 << 0) - -#endif diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c index 33f2a8fb8df9..2cf74085f935 100644 --- a/drivers/mtd/onenand/samsung.c +++ b/drivers/mtd/onenand/samsung.c @@ -23,11 +23,11 @@ #include #include #include +#include #include -#include -#include +#include "samsung.h" enum soc_type { TYPE_S3C6400, diff --git a/drivers/mtd/onenand/samsung.h b/drivers/mtd/onenand/samsung.h new file mode 100644 index 000000000000..c4a80e67e438 --- /dev/null +++ b/drivers/mtd/onenand/samsung.h @@ -0,0 +1,61 @@ +/* + * linux/arch/arm/plat-s3c/include/plat/regs-onenand.h + * + * Copyright (C) 2008-2010 Samsung Electronics + * Kyungmin Park + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __SAMSUNG_ONENAND_H__ +#define __SAMSUNG_ONENAND_H__ + +/* + * OneNAND Controller + */ +#define MEM_CFG_OFFSET 0x0000 +#define BURST_LEN_OFFSET 0x0010 +#define MEM_RESET_OFFSET 0x0020 +#define INT_ERR_STAT_OFFSET 0x0030 +#define INT_ERR_MASK_OFFSET 0x0040 +#define INT_ERR_ACK_OFFSET 0x0050 +#define ECC_ERR_STAT_OFFSET 0x0060 +#define MANUFACT_ID_OFFSET 0x0070 +#define DEVICE_ID_OFFSET 0x0080 +#define DATA_BUF_SIZE_OFFSET 0x0090 +#define BOOT_BUF_SIZE_OFFSET 0x00A0 +#define BUF_AMOUNT_OFFSET 0x00B0 +#define TECH_OFFSET 0x00C0 +#define FBA_WIDTH_OFFSET 0x00D0 +#define FPA_WIDTH_OFFSET 0x00E0 +#define FSA_WIDTH_OFFSET 0x00F0 +#define TRANS_SPARE_OFFSET 0x0140 +#define DBS_DFS_WIDTH_OFFSET 0x0160 +#define INT_PIN_ENABLE_OFFSET 0x01A0 +#define ACC_CLOCK_OFFSET 0x01C0 +#define FLASH_VER_ID_OFFSET 0x01F0 +#define FLASH_AUX_CNTRL_OFFSET 0x0300 /* s3c64xx only */ + +#define ONENAND_MEM_RESET_HOT 0x3 +#define ONENAND_MEM_RESET_COLD 0x2 +#define ONENAND_MEM_RESET_WARM 0x1 + +#define CACHE_OP_ERR (1 << 13) +#define RST_CMP (1 << 12) +#define RDY_ACT (1 << 11) +#define INT_ACT (1 << 10) +#define UNSUP_CMD (1 << 9) +#define LOCKED_BLK (1 << 8) +#define BLK_RW_CMP (1 << 7) +#define ERS_CMP (1 << 6) +#define PGM_CMP (1 << 5) +#define LOAD_CMP (1 << 4) +#define ERS_FAIL (1 << 3) +#define PGM_FAIL (1 << 2) +#define INT_TO (1 << 1) +#define LD_FAIL_ECC_ERR (1 << 0) + +#define TSRF (1 << 0) + +#endif -- cgit v1.2.3 From b9d7c5d3f48fb9582458ce014baa66c1e16d9be6 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 5 Mar 2013 12:04:37 +0100 Subject: rtc: s3c: make header file local Nothing outside of the rtc driver includes plat/regs-rtc.h, so we can simply move the file into the same directory, which allows us to build the file as platform-independent code. Signed-off-by: Arnd Bergmann Cc: rtc-linux@googlegroups.com Cc: Alessandro Zummo --- arch/arm/plat-samsung/include/plat/regs-rtc.h | 71 --------------------------- drivers/rtc/rtc-s3c.c | 3 +- drivers/rtc/rtc-s3c.h | 70 ++++++++++++++++++++++++++ 3 files changed, 71 insertions(+), 73 deletions(-) delete mode 100644 arch/arm/plat-samsung/include/plat/regs-rtc.h create mode 100644 drivers/rtc/rtc-s3c.h (limited to 'arch/arm/plat-samsung') diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h deleted file mode 100644 index 0f8263e93eea..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-rtc.h +++ /dev/null @@ -1,71 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h - * - * Copyright (c) 2003 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 Internal RTC register definition -*/ - -#ifndef __ASM_ARCH_REGS_RTC_H -#define __ASM_ARCH_REGS_RTC_H __FILE__ - -#define S3C2410_RTCREG(x) (x) -#define S3C2410_INTP S3C2410_RTCREG(0x30) -#define S3C2410_INTP_ALM (1 << 1) -#define S3C2410_INTP_TIC (1 << 0) - -#define S3C2410_RTCCON S3C2410_RTCREG(0x40) -#define S3C2410_RTCCON_RTCEN (1 << 0) -#define S3C2410_RTCCON_CNTSEL (1 << 2) -#define S3C2410_RTCCON_CLKRST (1 << 3) -#define S3C2443_RTCCON_TICSEL (1 << 4) -#define S3C64XX_RTCCON_TICEN (1 << 8) - -#define S3C2410_TICNT S3C2410_RTCREG(0x44) -#define S3C2410_TICNT_ENABLE (1 << 7) - -/* S3C2443: tick count is 15 bit wide - * TICNT[6:0] contains upper 7 bits - * TICNT1[7:0] contains lower 8 bits - */ -#define S3C2443_TICNT_PART(x) ((x & 0x7f00) >> 8) -#define S3C2443_TICNT1 S3C2410_RTCREG(0x4C) -#define S3C2443_TICNT1_PART(x) (x & 0xff) - -/* S3C2416: tick count is 32 bit wide - * TICNT[6:0] contains bits [14:8] - * TICNT1[7:0] contains lower 8 bits - * TICNT2[16:0] contains upper 17 bits - */ -#define S3C2416_TICNT2 S3C2410_RTCREG(0x48) -#define S3C2416_TICNT2_PART(x) ((x & 0xffff8000) >> 15) - -#define S3C2410_RTCALM S3C2410_RTCREG(0x50) -#define S3C2410_RTCALM_ALMEN (1 << 6) -#define S3C2410_RTCALM_YEAREN (1 << 5) -#define S3C2410_RTCALM_MONEN (1 << 4) -#define S3C2410_RTCALM_DAYEN (1 << 3) -#define S3C2410_RTCALM_HOUREN (1 << 2) -#define S3C2410_RTCALM_MINEN (1 << 1) -#define S3C2410_RTCALM_SECEN (1 << 0) - -#define S3C2410_ALMSEC S3C2410_RTCREG(0x54) -#define S3C2410_ALMMIN S3C2410_RTCREG(0x58) -#define S3C2410_ALMHOUR S3C2410_RTCREG(0x5c) - -#define S3C2410_ALMDATE S3C2410_RTCREG(0x60) -#define S3C2410_ALMMON S3C2410_RTCREG(0x64) -#define S3C2410_ALMYEAR S3C2410_RTCREG(0x68) - -#define S3C2410_RTCSEC S3C2410_RTCREG(0x70) -#define S3C2410_RTCMIN S3C2410_RTCREG(0x74) -#define S3C2410_RTCHOUR S3C2410_RTCREG(0x78) -#define S3C2410_RTCDATE S3C2410_RTCREG(0x7c) -#define S3C2410_RTCMON S3C2410_RTCREG(0x84) -#define S3C2410_RTCYEAR S3C2410_RTCREG(0x88) - -#endif /* __ASM_ARCH_REGS_RTC_H */ diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index fb994e9ddc15..7995f79d07e1 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -29,9 +29,8 @@ #include #include -#include #include -#include +#include "rtc-s3c.h" enum s3c_cpu_type { TYPE_S3C2410, diff --git a/drivers/rtc/rtc-s3c.h b/drivers/rtc/rtc-s3c.h new file mode 100644 index 000000000000..004b61a8343f --- /dev/null +++ b/drivers/rtc/rtc-s3c.h @@ -0,0 +1,70 @@ +/* + * Copyright (c) 2003 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 Internal RTC register definition +*/ + +#ifndef __ASM_ARCH_REGS_RTC_H +#define __ASM_ARCH_REGS_RTC_H __FILE__ + +#define S3C2410_RTCREG(x) (x) +#define S3C2410_INTP S3C2410_RTCREG(0x30) +#define S3C2410_INTP_ALM (1 << 1) +#define S3C2410_INTP_TIC (1 << 0) + +#define S3C2410_RTCCON S3C2410_RTCREG(0x40) +#define S3C2410_RTCCON_RTCEN (1 << 0) +#define S3C2410_RTCCON_CNTSEL (1 << 2) +#define S3C2410_RTCCON_CLKRST (1 << 3) +#define S3C2443_RTCCON_TICSEL (1 << 4) +#define S3C64XX_RTCCON_TICEN (1 << 8) + +#define S3C2410_TICNT S3C2410_RTCREG(0x44) +#define S3C2410_TICNT_ENABLE (1 << 7) + +/* S3C2443: tick count is 15 bit wide + * TICNT[6:0] contains upper 7 bits + * TICNT1[7:0] contains lower 8 bits + */ +#define S3C2443_TICNT_PART(x) ((x & 0x7f00) >> 8) +#define S3C2443_TICNT1 S3C2410_RTCREG(0x4C) +#define S3C2443_TICNT1_PART(x) (x & 0xff) + +/* S3C2416: tick count is 32 bit wide + * TICNT[6:0] contains bits [14:8] + * TICNT1[7:0] contains lower 8 bits + * TICNT2[16:0] contains upper 17 bits + */ +#define S3C2416_TICNT2 S3C2410_RTCREG(0x48) +#define S3C2416_TICNT2_PART(x) ((x & 0xffff8000) >> 15) + +#define S3C2410_RTCALM S3C2410_RTCREG(0x50) +#define S3C2410_RTCALM_ALMEN (1 << 6) +#define S3C2410_RTCALM_YEAREN (1 << 5) +#define S3C2410_RTCALM_MONEN (1 << 4) +#define S3C2410_RTCALM_DAYEN (1 << 3) +#define S3C2410_RTCALM_HOUREN (1 << 2) +#define S3C2410_RTCALM_MINEN (1 << 1) +#define S3C2410_RTCALM_SECEN (1 << 0) + +#define S3C2410_ALMSEC S3C2410_RTCREG(0x54) +#define S3C2410_ALMMIN S3C2410_RTCREG(0x58) +#define S3C2410_ALMHOUR S3C2410_RTCREG(0x5c) + +#define S3C2410_ALMDATE S3C2410_RTCREG(0x60) +#define S3C2410_ALMMON S3C2410_RTCREG(0x64) +#define S3C2410_ALMYEAR S3C2410_RTCREG(0x68) + +#define S3C2410_RTCSEC S3C2410_RTCREG(0x70) +#define S3C2410_RTCMIN S3C2410_RTCREG(0x74) +#define S3C2410_RTCHOUR S3C2410_RTCREG(0x78) +#define S3C2410_RTCDATE S3C2410_RTCREG(0x7c) +#define S3C2410_RTCMON S3C2410_RTCREG(0x84) +#define S3C2410_RTCYEAR S3C2410_RTCREG(0x88) + +#endif /* __ASM_ARCH_REGS_RTC_H */ -- cgit v1.2.3 From bd51de53e1be9896d815bbea30560262216d4616 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 10 Apr 2013 14:57:15 +0200 Subject: ARM: exynos: enable multiplatform support This makes it possible to enable the exynos platform as part of a multiplatform kernel, in addition to keeping the single-platform exynos support. The multiplatform variant has a number of limitations at the moment: * It only supports DT-enabled machines. This is not a problem in the long run, as non-DT machines for exynos are going away. The main problem here is that the gpio code and the exynos_eint irqchip are not multiplatform capable but still required for ATAGS based boot. * The watchdog driver is still missing a conversion. * sparsemem and memory_holes are currently not supported in multiplatform. The the multiplatform aware ARCH_EXYNOS Kconfig symbol is disabled for now, as dependent patches are still pending in other subsystem trees. We will enable it once everything comes together. Signed-off-by: Arnd Bergmann --- arch/arm/Kconfig | 9 +-------- arch/arm/configs/exynos4_defconfig | 2 +- arch/arm/mach-exynos/Kconfig | 25 +++++++++++++++++++++---- arch/arm/mach-exynos/Makefile | 5 +++-- arch/arm/mach-exynos/common.c | 6 ++++++ arch/arm/plat-samsung/Kconfig | 7 ++++++- arch/arm/plat-samsung/Makefile | 8 ++++++-- arch/arm/plat-samsung/include/plat/pm.h | 5 +++++ drivers/gpio/Makefile | 2 +- 9 files changed, 50 insertions(+), 19 deletions(-) (limited to 'arch/arm/plat-samsung') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 13b739469c51..b375a94fe292 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -853,18 +853,11 @@ config ARCH_S5PV210 help Samsung S5PV210/S5PC110 series based systems -config ARCH_EXYNOS +config ARCH_EXYNOS_SINGLE bool "Samsung EXYNOS" - select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_SPARSEMEM_ENABLE - select CLKDEV_LOOKUP - select CPU_V7 - select GENERIC_CLOCKEVENTS - select HAVE_CLK - select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_GPIO_H select NEED_MACH_MEMORY_H help diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig index bffe68e190a3..ae90a0f7d53c 100644 --- a/arch/arm/configs/exynos4_defconfig +++ b/arch/arm/configs/exynos4_defconfig @@ -4,7 +4,7 @@ CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_EXYNOS=y +CONFIG_ARCH_EXYNOS_SINGLE=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_MACH_SMDKC210=y CONFIG_MACH_ARMLEX4210=y diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index d8c251b13ab8..1d69c62fe3d8 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -7,6 +7,20 @@ # Configuration options for the EXYNOS4 +config ARCH_EXYNOS + # TODO: make this visible after all drivers are converted + bool "Samsung EXYNOS" if ARCH_MULTI_V7 && BROKEN + default ARCH_EXYNOS_SINGLE + select ARCH_HAS_CPUFREQ + select CLKDEV_LOOKUP + select CPU_V7 + select GENERIC_CLOCKEVENTS + select HAVE_CLK + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C_RTC if RTC_CLASS + help + Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) + if ARCH_EXYNOS menu "SAMSUNG EXYNOS SoCs Support" @@ -19,6 +33,9 @@ config ARCH_EXYNOS4 help Samsung EXYNOS4 SoCs based systems +config ARCH_EXYNOS4_SINGLE + def_bool ARCH_EXYNOS4 && ARCH_EXYNOS_SINGLE + config ARCH_EXYNOS5 bool "SAMSUNG EXYNOS5" select HAVE_SMP @@ -35,7 +52,7 @@ config CPU_EXYNOS4210 select PM_GENERIC_DOMAINS select S5P_PM if PM select S5P_SLEEP if PM - select SAMSUNG_DMADEV + select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE help Enable EXYNOS4210 CPU support @@ -45,7 +62,7 @@ config SOC_EXYNOS4212 depends on ARCH_EXYNOS4 select S5P_PM if PM select S5P_SLEEP if PM - select SAMSUNG_DMADEV + select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE help Enable EXYNOS4212 SoC support @@ -53,7 +70,7 @@ config SOC_EXYNOS4412 bool "SAMSUNG EXYNOS4412" default y depends on ARCH_EXYNOS4 - select SAMSUNG_DMADEV + select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE help Enable EXYNOS4412 SoC support @@ -64,7 +81,7 @@ config SOC_EXYNOS5250 select S5P_PM if PM select S5P_SLEEP if PM select S5P_DEV_MFC - select SAMSUNG_DMADEV + select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE help Enable EXYNOS5250 SoC support diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 435757e57bb4..57e9124d95e0 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -4,6 +4,7 @@ # http://www.samsung.com/ # # Licensed under GPLv2 +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include obj-y := obj-m := @@ -48,12 +49,12 @@ obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o # device support obj-y += dev-uart.o -obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o +obj-$(CONFIG_ARCH_EXYNOS4_SINGLE) += dev-audio.o obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o -obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o +obj-$(CONFIG_ARCH_EXYNOS_SINGLE) += setup-i2c0.o obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index d63d399c7bae..83bd3f0e1519 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -368,6 +368,9 @@ static void __init exynos4_map_io(void) else iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1)); + if (!IS_ENABLED(CONFIG_EXYNOS_ATAGS)) + return + /* initialize device information early */ exynos4_default_sdhci0(); exynos4_default_sdhci1(); @@ -570,6 +573,8 @@ static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no) s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no); } + +#ifdef CONFIG_EXYNOS_ATAGS static void __iomem *exynos_eint_base; static DEFINE_SPINLOCK(eint_lock); @@ -875,3 +880,4 @@ static int __init exynos_init_irq_eint(void) return 0; } arch_initcall(exynos_init_irq_eint); +#endif diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index a9d52167e16e..8aae6816ebc2 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -13,6 +13,10 @@ config PLAT_SAMSUNG help Base platform code for all Samsung SoC based systems +config PLAT_SAMSUNG_SINGLE + def_bool PLAT_SAMSUNG && !ARCH_MULTIPLATFORM + + config PLAT_S5P bool depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS) @@ -23,7 +27,7 @@ config PLAT_S5P select GIC_NON_BANKED if ARCH_EXYNOS4 select NO_IOPORT select PLAT_SAMSUNG - select S3C_GPIO_TRACK + select S3C_GPIO_TRACK if PLAT_SAMSUNG_SINGLE select S5P_GPIO_DRVSTR select SAMSUNG_CLKSRC select SAMSUNG_GPIOLIB_4BIT @@ -178,6 +182,7 @@ config S5P_DEV_UART config S3C_ADC bool "ADC common driver support" + depends on PLAT_SAMSUNG_SINGLE help Core support for the ADC block found in the Samsung SoC systems for drivers such as the touchscreen and hwmon to use to share diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 3a7c64d1814a..cf684b2eb6fc 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -4,6 +4,9 @@ # # Licensed under GPLv2 +ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include +ccflags-$(CONFIG_ARCH_EXYNOS) += -I$(srctree)/arch/arm/mach-exynos/include + obj-y := obj-m := obj-n := dummy.o @@ -34,7 +37,7 @@ obj-$(CONFIG_S3C_ADC) += adc.o obj-y += platformdata.o -obj-y += devs.o +obj-$(CONFIG_PLAT_SAMSUNG_SINGLE) += devs.o obj-y += dev-uart.o obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o obj-$(CONFIG_S5P_DEV_UART) += s5p-dev-uart.o @@ -51,9 +54,10 @@ obj-$(CONFIG_S3C_DMA) += dma.o s3c-dma-ops.o obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o # PM support - obj-$(CONFIG_PM) += pm.o +ifdef CONFIG_PLAT_SAMSUNG_SINGLE obj-$(CONFIG_PM) += pm-gpio.o +endif obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index f6fcadeee969..266a4e3e2458 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -166,6 +166,7 @@ extern void s3c_pm_check_store(void); */ extern void s3c_pm_configure_extint(void); +#ifdef CONFIG_PLAT_SAMSUNG_SINGLE /** * samsung_pm_restore_gpios() - restore the state of the gpios after sleep. * @@ -181,6 +182,10 @@ extern void samsung_pm_restore_gpios(void); * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios(). */ extern void samsung_pm_save_gpios(void); +#else +#define samsung_pm_restore_gpios() do { } while(0) +#define samsung_pm_save_gpios() do { } while(0) +#endif extern void s3c_pm_save_core(void); extern void s3c_pm_restore_core(void); diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 22e07bc9fcb5..6c16050d1577 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -57,7 +57,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o -obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o +obj-$(CONFIG_PLAT_SAMSUNG_SINGLE) += gpio-samsung.o obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o obj-$(CONFIG_GPIO_SCH) += gpio-sch.o obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o -- cgit v1.2.3 From 4923ee444a39c8b75027ed01a7812e940194dbec Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Fri, 26 Apr 2013 11:32:02 -0700 Subject: Revert "ARM: exynos: enable multiplatform support" This reverts commit bd51de53e1be9896d815bbea30560262216d4616. Turns out that multiplatform breaks some uses cases, such as when you have an existing defconfig, since it adds the new EXYNOS_SINGLE config option as a dependecy. As a result, nearly all exynos config options will be disabled by default. Reverting instead of rebasing since this branch is pulled in as a dependency elsewhere. Signed-off-by: Olof Johansson --- arch/arm/Kconfig | 9 ++++++++- arch/arm/configs/exynos4_defconfig | 2 +- arch/arm/mach-exynos/Kconfig | 25 ++++--------------------- arch/arm/mach-exynos/Makefile | 5 ++--- arch/arm/mach-exynos/common.c | 6 ------ arch/arm/plat-samsung/Kconfig | 7 +------ arch/arm/plat-samsung/Makefile | 8 ++------ arch/arm/plat-samsung/include/plat/pm.h | 5 ----- drivers/gpio/Makefile | 2 +- 9 files changed, 19 insertions(+), 50 deletions(-) (limited to 'arch/arm/plat-samsung') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b375a94fe292..13b739469c51 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -853,11 +853,18 @@ config ARCH_S5PV210 help Samsung S5PV210/S5PC110 series based systems -config ARCH_EXYNOS_SINGLE +config ARCH_EXYNOS bool "Samsung EXYNOS" + select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_SPARSEMEM_ENABLE + select CLKDEV_LOOKUP + select CPU_V7 + select GENERIC_CLOCKEVENTS + select HAVE_CLK + select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG + select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_GPIO_H select NEED_MACH_MEMORY_H help diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig index ae90a0f7d53c..bffe68e190a3 100644 --- a/arch/arm/configs/exynos4_defconfig +++ b/arch/arm/configs/exynos4_defconfig @@ -4,7 +4,7 @@ CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_EXYNOS_SINGLE=y +CONFIG_ARCH_EXYNOS=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_MACH_SMDKC210=y CONFIG_MACH_ARMLEX4210=y diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 1d69c62fe3d8..d8c251b13ab8 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -7,20 +7,6 @@ # Configuration options for the EXYNOS4 -config ARCH_EXYNOS - # TODO: make this visible after all drivers are converted - bool "Samsung EXYNOS" if ARCH_MULTI_V7 && BROKEN - default ARCH_EXYNOS_SINGLE - select ARCH_HAS_CPUFREQ - select CLKDEV_LOOKUP - select CPU_V7 - select GENERIC_CLOCKEVENTS - select HAVE_CLK - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C_RTC if RTC_CLASS - help - Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) - if ARCH_EXYNOS menu "SAMSUNG EXYNOS SoCs Support" @@ -33,9 +19,6 @@ config ARCH_EXYNOS4 help Samsung EXYNOS4 SoCs based systems -config ARCH_EXYNOS4_SINGLE - def_bool ARCH_EXYNOS4 && ARCH_EXYNOS_SINGLE - config ARCH_EXYNOS5 bool "SAMSUNG EXYNOS5" select HAVE_SMP @@ -52,7 +35,7 @@ config CPU_EXYNOS4210 select PM_GENERIC_DOMAINS select S5P_PM if PM select S5P_SLEEP if PM - select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE + select SAMSUNG_DMADEV help Enable EXYNOS4210 CPU support @@ -62,7 +45,7 @@ config SOC_EXYNOS4212 depends on ARCH_EXYNOS4 select S5P_PM if PM select S5P_SLEEP if PM - select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE + select SAMSUNG_DMADEV help Enable EXYNOS4212 SoC support @@ -70,7 +53,7 @@ config SOC_EXYNOS4412 bool "SAMSUNG EXYNOS4412" default y depends on ARCH_EXYNOS4 - select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE + select SAMSUNG_DMADEV help Enable EXYNOS4412 SoC support @@ -81,7 +64,7 @@ config SOC_EXYNOS5250 select S5P_PM if PM select S5P_SLEEP if PM select S5P_DEV_MFC - select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE + select SAMSUNG_DMADEV help Enable EXYNOS5250 SoC support diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 57e9124d95e0..435757e57bb4 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -4,7 +4,6 @@ # http://www.samsung.com/ # # Licensed under GPLv2 -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include obj-y := obj-m := @@ -49,12 +48,12 @@ obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o # device support obj-y += dev-uart.o -obj-$(CONFIG_ARCH_EXYNOS4_SINGLE) += dev-audio.o +obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o -obj-$(CONFIG_ARCH_EXYNOS_SINGLE) += setup-i2c0.o +obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 83bd3f0e1519..d63d399c7bae 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -368,9 +368,6 @@ static void __init exynos4_map_io(void) else iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1)); - if (!IS_ENABLED(CONFIG_EXYNOS_ATAGS)) - return - /* initialize device information early */ exynos4_default_sdhci0(); exynos4_default_sdhci1(); @@ -573,8 +570,6 @@ static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no) s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no); } - -#ifdef CONFIG_EXYNOS_ATAGS static void __iomem *exynos_eint_base; static DEFINE_SPINLOCK(eint_lock); @@ -880,4 +875,3 @@ static int __init exynos_init_irq_eint(void) return 0; } arch_initcall(exynos_init_irq_eint); -#endif diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 8aae6816ebc2..a9d52167e16e 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -13,10 +13,6 @@ config PLAT_SAMSUNG help Base platform code for all Samsung SoC based systems -config PLAT_SAMSUNG_SINGLE - def_bool PLAT_SAMSUNG && !ARCH_MULTIPLATFORM - - config PLAT_S5P bool depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS) @@ -27,7 +23,7 @@ config PLAT_S5P select GIC_NON_BANKED if ARCH_EXYNOS4 select NO_IOPORT select PLAT_SAMSUNG - select S3C_GPIO_TRACK if PLAT_SAMSUNG_SINGLE + select S3C_GPIO_TRACK select S5P_GPIO_DRVSTR select SAMSUNG_CLKSRC select SAMSUNG_GPIOLIB_4BIT @@ -182,7 +178,6 @@ config S5P_DEV_UART config S3C_ADC bool "ADC common driver support" - depends on PLAT_SAMSUNG_SINGLE help Core support for the ADC block found in the Samsung SoC systems for drivers such as the touchscreen and hwmon to use to share diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index cf684b2eb6fc..3a7c64d1814a 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -4,9 +4,6 @@ # # Licensed under GPLv2 -ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include -ccflags-$(CONFIG_ARCH_EXYNOS) += -I$(srctree)/arch/arm/mach-exynos/include - obj-y := obj-m := obj-n := dummy.o @@ -37,7 +34,7 @@ obj-$(CONFIG_S3C_ADC) += adc.o obj-y += platformdata.o -obj-$(CONFIG_PLAT_SAMSUNG_SINGLE) += devs.o +obj-y += devs.o obj-y += dev-uart.o obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o obj-$(CONFIG_S5P_DEV_UART) += s5p-dev-uart.o @@ -54,10 +51,9 @@ obj-$(CONFIG_S3C_DMA) += dma.o s3c-dma-ops.o obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o # PM support + obj-$(CONFIG_PM) += pm.o -ifdef CONFIG_PLAT_SAMSUNG_SINGLE obj-$(CONFIG_PM) += pm-gpio.o -endif obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index 266a4e3e2458..f6fcadeee969 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -166,7 +166,6 @@ extern void s3c_pm_check_store(void); */ extern void s3c_pm_configure_extint(void); -#ifdef CONFIG_PLAT_SAMSUNG_SINGLE /** * samsung_pm_restore_gpios() - restore the state of the gpios after sleep. * @@ -182,10 +181,6 @@ extern void samsung_pm_restore_gpios(void); * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios(). */ extern void samsung_pm_save_gpios(void); -#else -#define samsung_pm_restore_gpios() do { } while(0) -#define samsung_pm_save_gpios() do { } while(0) -#endif extern void s3c_pm_save_core(void); extern void s3c_pm_restore_core(void); diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 6c16050d1577..22e07bc9fcb5 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -57,7 +57,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o -obj-$(CONFIG_PLAT_SAMSUNG_SINGLE) += gpio-samsung.o +obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o obj-$(CONFIG_GPIO_SCH) += gpio-sch.o obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o -- cgit v1.2.3