From 317a3fa6b0814e31de5eb083bd1d047d66485d09 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 6 Dec 2013 16:13:04 +0200 Subject: ARM: OMAP1: USB: move omap_usb_config to platform data Move omap_usb_config to platform data, so that OTG driver can include it. Signed-off-by: Aaro Koskinen Acked-by: Tony Lindgren Signed-off-by: Felipe Balbi --- arch/arm/mach-omap1/include/mach/usb.h | 38 +--------------------------------- 1 file changed, 1 insertion(+), 37 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h index 45e5ac707cbb..2c263051dc51 100644 --- a/arch/arm/mach-omap1/include/mach/usb.h +++ b/arch/arm/mach-omap1/include/mach/usb.h @@ -8,43 +8,7 @@ #define is_usb0_device(config) 0 #endif -struct omap_usb_config { - /* Configure drivers according to the connectors on your board: - * - "A" connector (rectagular) - * ... for host/OHCI use, set "register_host". - * - "B" connector (squarish) or "Mini-B" - * ... for device/gadget use, set "register_dev". - * - "Mini-AB" connector (very similar to Mini-B) - * ... for OTG use as device OR host, initialize "otg" - */ - unsigned register_host:1; - unsigned register_dev:1; - u8 otg; /* port number, 1-based: usb1 == 2 */ - - u8 hmc_mode; - - /* implicitly true if otg: host supports remote wakeup? */ - u8 rwc; - - /* signaling pins used to talk to transceiver on usbN: - * 0 == usbN unused - * 2 == usb0-only, using internal transceiver - * 3 == 3 wire bidirectional - * 4 == 4 wire bidirectional - * 6 == 6 wire unidirectional (or TLL) - */ - u8 pins[3]; - - struct platform_device *udc_device; - struct platform_device *ohci_device; - struct platform_device *otg_device; - - u32 (*usb0_init)(unsigned nwires, unsigned is_device); - u32 (*usb1_init)(unsigned nwires); - u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup); - - int (*ocpi_enable)(void); -}; +#include void omap_otg_init(struct omap_usb_config *config); -- cgit v1.2.3