From d88ae11e45ed9b327ee0aa7da5d5f1837a03e590 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 3 Feb 2014 23:02:02 +0100 Subject: ARM: ux500: move AB8500 modem I2C settings to DT This moves the pin setup of the AB8500 modem I2C pins (SCL/SDA) from the board file to the device tree. Cc: Patrice Chotard Cc: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-href-ab8500.dtsi | 18 +++++++++++++++++- arch/arm/mach-ux500/board-mop500-pins.c | 8 -------- 2 files changed, 17 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi index beb59f99eff8..333b554c0bf7 100644 --- a/arch/arm/boot/dts/ste-href-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi @@ -37,7 +37,8 @@ <&adi1_default_mode>, <&usbuicc_default_mode>, <&dmic_default_mode>, - <&extcpena_default_mode>; + <&extcpena_default_mode>, + <&modsclsda_default_mode>; /* * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42 @@ -354,6 +355,21 @@ }; }; }; + /* Modem I2C setup (SCL and SDA pins) */ + modsclsda { + modsclsda_default_mode: modsclsda_default { + default_mux { + ste,function = "modsclsda"; + ste,pins = "modsclsda_d_1"; + }; + default_cfg { + ste,pins = "GPIO40_T19", + "GPIO41_U19"; + input-enable; + bias-pull-down; + }; + }; + }; }; }; }; diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index bbd5bc56f7f0..cbe91714f57f 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -55,14 +55,6 @@ static struct pinctrl_map __initdata ab8500_pinmap[] = { /* sysclkreq4 disable, mux in gpio configured in input pulldown */ AB8500_MUX_STATE("gpio3_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP), AB8500_PIN_STATE("GPIO3_U9", in_pd, "regulator.36", PINCTRL_STATE_SLEEP), - - /* - * pins 40 and 41 are muxed in MODCSLSDA - * configured INPUT PULL DOWN - */ - AB8500_MUX_HOG("modsclsda_d_1", "modsclsda"), - AB8500_PIN_HOG("GPIO40_T19", in_pd), - AB8500_PIN_HOG("GPIO41_U19", in_pd), }; static struct pinctrl_map __initdata ab8505_pinmap[] = { -- cgit v1.2.3