From b46211d6dcfb81a8af66b8684a42d629183670d4 Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Fri, 24 Jun 2016 03:59:33 +0200 Subject: ARM: OMAP3: hwmod data: Add sysc information for DSI Add missing sysconfig/sysstatus information to OMAP3 hwmod. The information has been checked against OMAP34xx and OMAP36xx TRM. Without this change DSI block is not reset during boot, which is required for working Nokia N950 display. Signed-off-by: Sebastian Reichel Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index d72ee6185d5e..1cc4a6f3954e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -722,8 +722,20 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { * display serial interface controller */ +static struct omap_hwmod_class_sysconfig omap3xxx_dsi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = { .name = "dsi", + .sysc = &omap3xxx_dsi_sysc, }; static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = { -- cgit v1.2.3 From 60a5b875047e827d0f5a1a3166df714be2ef13df Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Tue, 12 Jul 2016 12:50:31 -0500 Subject: ARM: OMAP4+: hwmod: Add hwmod flag for HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET Nearly all modules on OMAP4 and newer platforms have clkctrl offsets that are non-zero except for the RTC on am335x. Because we rely on a clkctrl_offset of zero to indicate no clkctrl_offset being present, lets add a HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET flag to use to indicate hwmods that have a valid clkctrl_offset of 0. Signed-off-by: Dave Gerlach Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 4041bad79a9a..78904017f18c 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -443,8 +443,12 @@ struct omap_hwmod_omap2_prcm { * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM * module-level context loss register associated with them; this * flag bit should be set in those cases + * HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET: Some IP blocks have a valid CLKCTRL + * offset of zero; this flag bit should be set in those cases to + * distinguish from hwmods that have no clkctrl offset. */ #define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT (1 << 0) +#define HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET (1 << 1) /** * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data -- cgit v1.2.3 From ddb0d99d53fea77c568d17265b8bca6e64f2975b Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Tue, 12 Jul 2016 12:50:32 -0500 Subject: ARM: OMAP2+: AM33XX: Add HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET flag to rtc hwmod The RTC hwmod on AM335x family of SoCs is unique in that the clkctrl_offs in the PRCM is 0. We rely on a clkctrl_offs of zero as indicating no clkctrl is present so we must flag this hwmod with HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET to indicate the 0 clkctrl_offs is in fact valid in this case. Signed-off-by: Dave Gerlach Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index 55c5878577f4..e2d84aa7f595 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -29,6 +29,7 @@ #define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl)) #define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl)) #define RSTST(oh, rstst) ((oh).prcm.omap4.rstst_offs = (rstst)) +#define PRCM_FLAGS(oh, flag) ((oh).prcm.omap4.flags = (flag)) /* * 'l3' class @@ -1296,6 +1297,7 @@ static void omap_hwmod_am33xx_clkctrl(void) CLKCTRL(am33xx_i2c1_hwmod, AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET); CLKCTRL(am33xx_wd_timer1_hwmod, AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET); CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET); + PRCM_FLAGS(am33xx_rtc_hwmod, HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET); CLKCTRL(am33xx_mmc2_hwmod, AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET); -- cgit v1.2.3 From 428929c79cc3de7f9fefd2184da6ed625676ad9e Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Tue, 12 Jul 2016 12:50:33 -0500 Subject: ARM: OMAP4+: Have _omap4_wait_target_* check for valid clkctrl_offs Previously the low-level CM call internal to the _omap4_wait_target_ready/disable calls was responsible for checking for a valid clkctrl_offs. Now we must also consider the value of the prcm.omap4.flags because if HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET is set in the flags then clkctrl_offs of 0 is valid. Let's add this check into the _omap4_wait_target_ready/disable where we have access to both the clkctrl_offs and the flags values and simply return 0 without calling the low level CM call at all, which would have returned 0 anyway if the clktrl_offs was zero. Signed-off-by: Dave Gerlach Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 5b709383381c..1052b29697b8 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1053,6 +1053,10 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh) if (oh->flags & HWMOD_NO_IDLEST) return 0; + if (!oh->prcm.omap4.clkctrl_offs && + !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET)) + return 0; + return omap_cm_wait_module_idle(oh->clkdm->prcm_partition, oh->clkdm->cm_inst, oh->prcm.omap4.clkctrl_offs, 0); @@ -2971,6 +2975,10 @@ static int _omap4_wait_target_ready(struct omap_hwmod *oh) if (!_find_mpu_rt_port(oh)) return 0; + if (!oh->prcm.omap4.clkctrl_offs && + !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET)) + return 0; + /* XXX check module SIDLEMODE, hardreset status */ return omap_cm_wait_module_ready(oh->clkdm->prcm_partition, -- cgit v1.2.3 From e4e53287701b2b8087fa107b4a965fa49505615f Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Tue, 12 Jul 2016 12:50:34 -0500 Subject: ARM: OMAP4+: CM: Remove redundant checks for clkctrl_offs of zero Now that we have moved the check for valid clkctrl_offs to the caller of am33xx_cm_wait_module_ready/idle and omap4_cminst_wait_module_ready/idle let's remove the now redundant check for clkctrl_offs from these functions. Signed-off-by: Dave Gerlach Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/cm33xx.c | 6 ------ arch/arm/mach-omap2/cminst44xx.c | 6 ------ 2 files changed, 12 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index c073fb57dd13..6f2d0aec0513 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -220,9 +220,6 @@ static int am33xx_cm_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs, { int i = 0; - if (!clkctrl_offs) - return 0; - omap_test_timeout(_is_module_ready(inst, clkctrl_offs), MAX_MODULE_READY_TIME, i); @@ -246,9 +243,6 @@ static int am33xx_cm_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs, { int i = 0; - if (!clkctrl_offs) - return 0; - omap_test_timeout((_clkctrl_idlest(inst, clkctrl_offs) == CLKCTRL_IDLEST_DISABLED), MAX_MODULE_READY_TIME, i); diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 2c0e07ed6b99..2ab27ade136a 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -278,9 +278,6 @@ static int omap4_cminst_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs, { int i = 0; - if (!clkctrl_offs) - return 0; - omap_test_timeout(_is_module_ready(part, inst, clkctrl_offs), MAX_MODULE_READY_TIME, i); @@ -304,9 +301,6 @@ static int omap4_cminst_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs, { int i = 0; - if (!clkctrl_offs) - return 0; - omap_test_timeout((_clkctrl_idlest(part, inst, clkctrl_offs) == CLKCTRL_IDLEST_DISABLED), MAX_MODULE_DISABLE_TIME, i); -- cgit v1.2.3 From 42647f947210cb9fd8a7737c0fd2a60002a81188 Mon Sep 17 00:00:00 2001 From: Teresa Remmet Date: Mon, 15 Aug 2016 09:10:39 -0700 Subject: ARM: dts: am335x: Update elm phandle binding The check for the "elm_id" binding had been removed. This causes nand boot to fail on boards still using the old binding. Update the bindings on those boards. Signed-off-by: Teresa Remmet Acked-by: Brian Norris Acked-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-baltos.dtsi | 2 +- arch/arm/boot/dts/am335x-igep0033.dtsi | 2 +- arch/arm/boot/dts/am335x-phycore-som.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index c8609d8d2c55..b689172632ef 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -226,7 +226,7 @@ #address-cells = <1>; #size-cells = <1>; - elm_id = <&elm>; + ti,elm-id = <&elm>; }; }; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index df63484ef9b3..e7d9ca1305fa 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -161,7 +161,7 @@ #address-cells = <1>; #size-cells = <1>; - elm_id = <&elm>; + ti,elm-id = <&elm>; /* MTD partition table */ partition@0 { diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 86f773165d5c..1263c9d4cba3 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -197,7 +197,7 @@ gpmc,wr-access-ns = <30>; gpmc,wr-data-mux-bus-ns = <0>; - elm_id = <&elm>; + ti,elm-id = <&elm>; #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From 5e0568dfbfb8c13cdb69c9fd06d600593ad4b430 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 15 Aug 2016 09:10:45 -0700 Subject: ARM: dts: overo: fix gpmc nand cs0 range The gpmc ranges property for NAND at CS0 has been broken since it was first added. This currently prevents the nand gpmc child node from being probed: omap-gpmc 6e000000.gpmc: /ocp/gpmc@6e000000/nand@0,0 has malformed 'reg' property and consequently the NAND device from being registered. Fixes: 98ce6007efb4 ("ARM: dts: overo: Support PoP NAND") Cc: stable # 4.3 Signed-off-by: Johan Hovold Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-overo-base.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index de256fa8da48..b15c435439fb 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -223,7 +223,7 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x20000000>; + ranges = <0 0 0x30000000 0x1000000>; /* CS0 */ nand@0,0 { compatible = "ti,omap2-nand"; -- cgit v1.2.3 From 153b58ea932b2d0642fa5cd41c93bb0555f3f09b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 15 Aug 2016 09:10:49 -0700 Subject: ARM: dts: overo: fix gpmc nand on boards with ethernet The gpmc ranges property for NAND at CS0 was being overridden by later includes that defined gpmc ethernet nodes, effectively breaking NAND on these systems: omap-gpmc 6e000000.gpmc: /ocp/gpmc@6e000000/nand@0,0 has malformed 'reg' property Instead of redefining the NAND range in every such dtsi, define all currently used ranges in omap3-overo-base.dtsi. Fixes: 98ce6007efb4 ("ARM: dts: overo: Support PoP NAND") Cc: stable # 4.3 Signed-off-by: Johan Hovold Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-overo-base.dtsi | 4 +++- arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi | 2 -- arch/arm/boot/dts/omap3-overo-tobi-common.dtsi | 2 -- arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi | 3 --- 4 files changed, 3 insertions(+), 8 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index b15c435439fb..3e946cac55f3 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -223,7 +223,9 @@ }; &gpmc { - ranges = <0 0 0x30000000 0x1000000>; /* CS0 */ + ranges = <0 0 0x30000000 0x1000000>, /* CS0 */ + <4 0 0x2b000000 0x1000000>, /* CS4 */ + <5 0 0x2c000000 0x1000000>; /* CS5 */ nand@0,0 { compatible = "ti,omap2-nand"; diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi index 7df27926ead2..4f4c6efbd518 100644 --- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi @@ -55,8 +55,6 @@ #include "omap-gpmc-smsc9221.dtsi" &gpmc { - ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */ - ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio6>; diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi index 9e24b6a1d07b..1b304e2f1bd2 100644 --- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi @@ -27,8 +27,6 @@ #include "omap-gpmc-smsc9221.dtsi" &gpmc { - ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */ - ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio6>; diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi index 334109e14613..82e98ee3023a 100644 --- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi @@ -15,9 +15,6 @@ #include "omap-gpmc-smsc9221.dtsi" &gpmc { - ranges = <4 0 0x2b000000 0x1000000>, /* CS4 */ - <5 0 0x2c000000 0x1000000>; /* CS5 */ - smsc1: ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio6>; -- cgit v1.2.3 From a8771a6a64226c24f4baf30b8d13a2116795487f Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Sat, 13 Aug 2016 10:13:04 -0500 Subject: ARM: dts: logicpd-torpedo-som: Provide NAND ready pin This was applied to a variety of omap3 boards, so it should probably be applied here. I did not test NAND performance, but I tested this with UBI to confirm read/write didn't break. Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 5e9a13c0eaf7..1c2c74655416 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -46,6 +46,7 @@ linux,mtd-name = "micron,mt29f4g16abbda3w"; nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; -- cgit v1.2.3 From 4875b8fcf68d8133713dd5c5df5bc79431be8be7 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Sat, 13 Aug 2016 10:21:00 -0500 Subject: ARM: dts: logicpd-somlv: Fix NAND device nodes This fix was applied to a bunch of omap3 devices including LogicPD Torpedo, but this got missed since it was new around the same times the patches were applied. This makes the GPMC parameters match the Torpedo since they have the same processor PoP memory. Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-som-lv.dtsi | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 365f39ff58bb..0ff1c2de95bf 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -35,10 +35,15 @@ ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { - linux,mtd-name = "micron,mt29f4g16abbda3w"; + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + linux,mtd-name = "micron,mt29f4g16abbda3w"; nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; @@ -54,10 +59,6 @@ gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; gpmc,device-width = <2>; - - gpmc,page-burst-access-ns = <5>; - gpmc,cycle2cycle-delay-ns = <50>; - #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3