From 9242ef12f0d174da1739a071fb4a5fc5de27905e Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Tue, 24 Mar 2009 17:22:05 +1000 Subject: m68knommu: fix 5307 ColdFire UART vector setup There is a couple of problems with the UART vector setup for the 5307 ColdFire UART. The ICR register access should be 8bit, not 32bit. The address of the UIVR register is wrong, it needs to be offset into the MBAR register region. Fix these. Signed-off-by: Greg Ungerer --- arch/m68knommu/platform/5307/config.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/m68knommu') diff --git a/arch/m68knommu/platform/5307/config.c b/arch/m68knommu/platform/5307/config.c index 724faf05852a..44803bf70a6e 100644 --- a/arch/m68knommu/platform/5307/config.c +++ b/arch/m68knommu/platform/5307/config.c @@ -65,12 +65,12 @@ static struct platform_device *m5307_devices[] __initdata = { static void __init m5307_uart_init_line(int line, int irq) { if (line == 0) { - writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); - writeb(irq, MCFUART_BASE1 + MCFUART_UIVR); + writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); + writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR); mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1); } else if (line == 1) { - writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); - writeb(irq, MCFUART_BASE2 + MCFUART_UIVR); + writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); + writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR); mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2); } } -- cgit v1.2.3