From 6e6f66226f0092a39526f8d6f02ebb447d995be2 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 22 Jul 2010 11:33:30 -0500 Subject: powerpc: rename immap_86xx.h to fsl_guts.h, and add 85xx support The immap_86xx.h header file only defines one data structure: the "global utilities" register set found on Freescale PowerPC SOCs. Rename this file to fsl_guts.h to reflect its true purpose, and extend it to cover the "GUTS" register set on 85xx chips. Signed-off-by: Timur Tabi Acked-by: Mark Brown Acked-by: Kumar Gala Signed-off-by: Liam Girdwood --- arch/powerpc/include/asm/fsl_guts.h | 197 ++++++++++++++++++++++++++++++++++ arch/powerpc/include/asm/immap_86xx.h | 156 --------------------------- 2 files changed, 197 insertions(+), 156 deletions(-) create mode 100644 arch/powerpc/include/asm/fsl_guts.h delete mode 100644 arch/powerpc/include/asm/immap_86xx.h (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/fsl_guts.h b/arch/powerpc/include/asm/fsl_guts.h new file mode 100644 index 000000000000..bebd12463ec9 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_guts.h @@ -0,0 +1,197 @@ +/** + * Freecale 85xx and 86xx Global Utilties register set + * + * Authors: Jeff Brown + * Timur Tabi + * + * Copyright 2004,2007 Freescale Semiconductor, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_POWERPC_FSL_GUTS_H__ +#define __ASM_POWERPC_FSL_GUTS_H__ +#ifdef __KERNEL__ + +/* + * These #ifdefs are safe because it's not possible to build a kernel that + * runs on e500 and e600 cores. + */ + +#if !defined(CONFIG_PPC_85xx) && !defined(CONFIG_PPC_86xx) +#error Only 85xx and 86xx SOCs are supported +#endif + +/** + * Global Utility Registers. + * + * Not all registers defined in this structure are available on all chips, so + * you are expected to know whether a given register actually exists on your + * chip before you access it. + * + * Also, some registers are similar on different chips but have slightly + * different names. In these cases, one name is chosen to avoid extraneous + * #ifdefs. + */ +#ifdef CONFIG_PPC_85xx +struct ccsr_guts_85xx { +#else +struct ccsr_guts_86xx { +#endif + __be32 porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */ + __be32 porbmsr; /* 0x.0004 - POR Boot Mode Status Register */ + __be32 porimpscr; /* 0x.0008 - POR I/O Impedance Status and Control Register */ + __be32 pordevsr; /* 0x.000c - POR I/O Device Status Register */ + __be32 pordbgmsr; /* 0x.0010 - POR Debug Mode Status Register */ + __be32 pordevsr2; /* 0x.0014 - POR device status register 2 */ + u8 res018[0x20 - 0x18]; + __be32 porcir; /* 0x.0020 - POR Configuration Information Register */ + u8 res024[0x30 - 0x24]; + __be32 gpiocr; /* 0x.0030 - GPIO Control Register */ + u8 res034[0x40 - 0x34]; + __be32 gpoutdr; /* 0x.0040 - General-Purpose Output Data Register */ + u8 res044[0x50 - 0x44]; + __be32 gpindr; /* 0x.0050 - General-Purpose Input Data Register */ + u8 res054[0x60 - 0x54]; + __be32 pmuxcr; /* 0x.0060 - Alternate Function Signal Multiplex Control */ + __be32 pmuxcr2; /* 0x.0064 - Alternate function signal multiplex control 2 */ + __be32 dmuxcr; /* 0x.0068 - DMA Mux Control Register */ + u8 res06c[0x70 - 0x6c]; + __be32 devdisr; /* 0x.0070 - Device Disable Control */ + __be32 devdisr2; /* 0x.0074 - Device Disable Control 2 */ + u8 res078[0x7c - 0x78]; + __be32 pmjcr; /* 0x.007c - 4 Power Management Jog Control Register */ + __be32 powmgtcsr; /* 0x.0080 - Power Management Status and Control Register */ + __be32 pmrccr; /* 0x.0084 - Power Management Reset Counter Configuration Register */ + __be32 pmpdccr; /* 0x.0088 - Power Management Power Down Counter Configuration Register */ + __be32 pmcdr; /* 0x.008c - 4Power management clock disable register */ + __be32 mcpsumr; /* 0x.0090 - Machine Check Summary Register */ + __be32 rstrscr; /* 0x.0094 - Reset Request Status and Control Register */ + __be32 ectrstcr; /* 0x.0098 - Exception reset control register */ + __be32 autorstsr; /* 0x.009c - Automatic reset status register */ + __be32 pvr; /* 0x.00a0 - Processor Version Register */ + __be32 svr; /* 0x.00a4 - System Version Register */ + u8 res0a8[0xb0 - 0xa8]; + __be32 rstcr; /* 0x.00b0 - Reset Control Register */ + u8 res0b4[0xc0 - 0xb4]; +#ifdef CONFIG_PPC_85xx + __be32 iovselsr; /* 0x.00c0 - I/O voltage select status register */ +#else + __be32 elbcvselcr; /* 0x.00c0 - eLBC Voltage Select Ctrl Reg */ +#endif + u8 res0c4[0x224 - 0xc4]; + __be32 iodelay1; /* 0x.0224 - IO delay control register 1 */ + __be32 iodelay2; /* 0x.0228 - IO delay control register 2 */ + u8 res22c[0x800 - 0x22c]; + __be32 clkdvdr; /* 0x.0800 - Clock Divide Register */ + u8 res804[0x900 - 0x804]; + __be32 ircr; /* 0x.0900 - Infrared Control Register */ + u8 res904[0x908 - 0x904]; + __be32 dmacr; /* 0x.0908 - DMA Control Register */ + u8 res90c[0x914 - 0x90c]; + __be32 elbccr; /* 0x.0914 - eLBC Control Register */ + u8 res918[0xb20 - 0x918]; + __be32 ddr1clkdr; /* 0x.0b20 - DDR1 Clock Disable Register */ + __be32 ddr2clkdr; /* 0x.0b24 - DDR2 Clock Disable Register */ + __be32 ddrclkdr; /* 0x.0b28 - DDR Clock Disable Register */ + u8 resb2c[0xe00 - 0xb2c]; + __be32 clkocr; /* 0x.0e00 - Clock Out Select Register */ + u8 rese04[0xe10 - 0xe04]; + __be32 ddrdllcr; /* 0x.0e10 - DDR DLL Control Register */ + u8 rese14[0xe20 - 0xe14]; + __be32 lbcdllcr; /* 0x.0e20 - LBC DLL Control Register */ + __be32 cpfor; /* 0x.0e24 - L2 charge pump fuse override register */ + u8 rese28[0xf04 - 0xe28]; + __be32 srds1cr0; /* 0x.0f04 - SerDes1 Control Register 0 */ + __be32 srds1cr1; /* 0x.0f08 - SerDes1 Control Register 0 */ + u8 resf0c[0xf2c - 0xf0c]; + __be32 itcr; /* 0x.0f2c - Internal transaction control register */ + u8 resf30[0xf40 - 0xf30]; + __be32 srds2cr0; /* 0x.0f40 - SerDes2 Control Register 0 */ + __be32 srds2cr1; /* 0x.0f44 - SerDes2 Control Register 0 */ +} __attribute__ ((packed)); + +#ifdef CONFIG_PPC_86xx + +#define CCSR_GUTS_DMACR_DEV_SSI 0 /* DMA controller/channel set to SSI */ +#define CCSR_GUTS_DMACR_DEV_IR 1 /* DMA controller/channel set to IR */ + +/* + * Set the DMACR register in the GUTS + * + * The DMACR register determines the source of initiated transfers for each + * channel on each DMA controller. Rather than have a bunch of repetitive + * macros for the bit patterns, we just have a function that calculates + * them. + * + * guts: Pointer to GUTS structure + * co: The DMA controller (0 or 1) + * ch: The channel on the DMA controller (0, 1, 2, or 3) + * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx) + */ +static inline void guts_set_dmacr(struct ccsr_guts_86xx __iomem *guts, + unsigned int co, unsigned int ch, unsigned int device) +{ + unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch)); + + clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift); +} + +#define CCSR_GUTS_PMUXCR_LDPSEL 0x00010000 +#define CCSR_GUTS_PMUXCR_SSI1_MASK 0x0000C000 /* Bitmask for SSI1 */ +#define CCSR_GUTS_PMUXCR_SSI1_LA 0x00000000 /* Latched address */ +#define CCSR_GUTS_PMUXCR_SSI1_HI 0x00004000 /* High impedance */ +#define CCSR_GUTS_PMUXCR_SSI1_SSI 0x00008000 /* Used for SSI1 */ +#define CCSR_GUTS_PMUXCR_SSI2_MASK 0x00003000 /* Bitmask for SSI2 */ +#define CCSR_GUTS_PMUXCR_SSI2_LA 0x00000000 /* Latched address */ +#define CCSR_GUTS_PMUXCR_SSI2_HI 0x00001000 /* High impedance */ +#define CCSR_GUTS_PMUXCR_SSI2_SSI 0x00002000 /* Used for SSI2 */ +#define CCSR_GUTS_PMUXCR_LA_22_25_LA 0x00000000 /* Latched Address */ +#define CCSR_GUTS_PMUXCR_LA_22_25_HI 0x00000400 /* High impedance */ +#define CCSR_GUTS_PMUXCR_DBGDRV 0x00000200 /* Signals not driven */ +#define CCSR_GUTS_PMUXCR_DMA2_0 0x00000008 +#define CCSR_GUTS_PMUXCR_DMA2_3 0x00000004 +#define CCSR_GUTS_PMUXCR_DMA1_0 0x00000002 +#define CCSR_GUTS_PMUXCR_DMA1_3 0x00000001 + +/* + * Set the DMA external control bits in the GUTS + * + * The DMA external control bits in the PMUXCR are only meaningful for + * channels 0 and 3. Any other channels are ignored. + * + * guts: Pointer to GUTS structure + * co: The DMA controller (0 or 1) + * ch: The channel on the DMA controller (0, 1, 2, or 3) + * value: the new value for the bit (0 or 1) + */ +static inline void guts_set_pmuxcr_dma(struct ccsr_guts_86xx __iomem *guts, + unsigned int co, unsigned int ch, unsigned int value) +{ + if ((ch == 0) || (ch == 3)) { + unsigned int shift = 2 * (co + 1) - (ch & 1) - 1; + + clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift); + } +} + +#define CCSR_GUTS_CLKDVDR_PXCKEN 0x80000000 +#define CCSR_GUTS_CLKDVDR_SSICKEN 0x20000000 +#define CCSR_GUTS_CLKDVDR_PXCKINV 0x10000000 +#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25 +#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK 0x06000000 +#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \ + (((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT) +#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT 16 +#define CCSR_GUTS_CLKDVDR_PXCLK_MASK 0x001F0000 +#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT) +#define CCSR_GUTS_CLKDVDR_SSICLK_MASK 0x000000FF +#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK) + +#endif + +#endif +#endif diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h deleted file mode 100644 index 0f165e59c326..000000000000 --- a/arch/powerpc/include/asm/immap_86xx.h +++ /dev/null @@ -1,156 +0,0 @@ -/** - * MPC86xx Internal Memory Map - * - * Authors: Jeff Brown - * Timur Tabi - * - * Copyright 2004,2007 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This header file defines structures for various 86xx SOC devices that are - * used by multiple source files. - */ - -#ifndef __ASM_POWERPC_IMMAP_86XX_H__ -#define __ASM_POWERPC_IMMAP_86XX_H__ -#ifdef __KERNEL__ - -/* Global Utility Registers */ -struct ccsr_guts { - __be32 porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */ - __be32 porbmsr; /* 0x.0004 - POR Boot Mode Status Register */ - __be32 porimpscr; /* 0x.0008 - POR I/O Impedance Status and Control Register */ - __be32 pordevsr; /* 0x.000c - POR I/O Device Status Register */ - __be32 pordbgmsr; /* 0x.0010 - POR Debug Mode Status Register */ - u8 res1[0x20 - 0x14]; - __be32 porcir; /* 0x.0020 - POR Configuration Information Register */ - u8 res2[0x30 - 0x24]; - __be32 gpiocr; /* 0x.0030 - GPIO Control Register */ - u8 res3[0x40 - 0x34]; - __be32 gpoutdr; /* 0x.0040 - General-Purpose Output Data Register */ - u8 res4[0x50 - 0x44]; - __be32 gpindr; /* 0x.0050 - General-Purpose Input Data Register */ - u8 res5[0x60 - 0x54]; - __be32 pmuxcr; /* 0x.0060 - Alternate Function Signal Multiplex Control */ - u8 res6[0x70 - 0x64]; - __be32 devdisr; /* 0x.0070 - Device Disable Control */ - __be32 devdisr2; /* 0x.0074 - Device Disable Control 2 */ - u8 res7[0x80 - 0x78]; - __be32 powmgtcsr; /* 0x.0080 - Power Management Status and Control Register */ - u8 res8[0x90 - 0x84]; - __be32 mcpsumr; /* 0x.0090 - Machine Check Summary Register */ - __be32 rstrscr; /* 0x.0094 - Reset Request Status and Control Register */ - u8 res9[0xA0 - 0x98]; - __be32 pvr; /* 0x.00a0 - Processor Version Register */ - __be32 svr; /* 0x.00a4 - System Version Register */ - u8 res10[0xB0 - 0xA8]; - __be32 rstcr; /* 0x.00b0 - Reset Control Register */ - u8 res11[0xC0 - 0xB4]; - __be32 elbcvselcr; /* 0x.00c0 - eLBC Voltage Select Ctrl Reg */ - u8 res12[0x800 - 0xC4]; - __be32 clkdvdr; /* 0x.0800 - Clock Divide Register */ - u8 res13[0x900 - 0x804]; - __be32 ircr; /* 0x.0900 - Infrared Control Register */ - u8 res14[0x908 - 0x904]; - __be32 dmacr; /* 0x.0908 - DMA Control Register */ - u8 res15[0x914 - 0x90C]; - __be32 elbccr; /* 0x.0914 - eLBC Control Register */ - u8 res16[0xB20 - 0x918]; - __be32 ddr1clkdr; /* 0x.0b20 - DDR1 Clock Disable Register */ - __be32 ddr2clkdr; /* 0x.0b24 - DDR2 Clock Disable Register */ - __be32 ddrclkdr; /* 0x.0b28 - DDR Clock Disable Register */ - u8 res17[0xE00 - 0xB2C]; - __be32 clkocr; /* 0x.0e00 - Clock Out Select Register */ - u8 res18[0xE10 - 0xE04]; - __be32 ddrdllcr; /* 0x.0e10 - DDR DLL Control Register */ - u8 res19[0xE20 - 0xE14]; - __be32 lbcdllcr; /* 0x.0e20 - LBC DLL Control Register */ - u8 res20[0xF04 - 0xE24]; - __be32 srds1cr0; /* 0x.0f04 - SerDes1 Control Register 0 */ - __be32 srds1cr1; /* 0x.0f08 - SerDes1 Control Register 0 */ - u8 res21[0xF40 - 0xF0C]; - __be32 srds2cr0; /* 0x.0f40 - SerDes1 Control Register 0 */ - __be32 srds2cr1; /* 0x.0f44 - SerDes1 Control Register 0 */ -} __attribute__ ((packed)); - -#define CCSR_GUTS_DMACR_DEV_SSI 0 /* DMA controller/channel set to SSI */ -#define CCSR_GUTS_DMACR_DEV_IR 1 /* DMA controller/channel set to IR */ - -/* - * Set the DMACR register in the GUTS - * - * The DMACR register determines the source of initiated transfers for each - * channel on each DMA controller. Rather than have a bunch of repetitive - * macros for the bit patterns, we just have a function that calculates - * them. - * - * guts: Pointer to GUTS structure - * co: The DMA controller (0 or 1) - * ch: The channel on the DMA controller (0, 1, 2, or 3) - * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx) - */ -static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts, - unsigned int co, unsigned int ch, unsigned int device) -{ - unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch)); - - clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift); -} - -#define CCSR_GUTS_PMUXCR_LDPSEL 0x00010000 -#define CCSR_GUTS_PMUXCR_SSI1_MASK 0x0000C000 /* Bitmask for SSI1 */ -#define CCSR_GUTS_PMUXCR_SSI1_LA 0x00000000 /* Latched address */ -#define CCSR_GUTS_PMUXCR_SSI1_HI 0x00004000 /* High impedance */ -#define CCSR_GUTS_PMUXCR_SSI1_SSI 0x00008000 /* Used for SSI1 */ -#define CCSR_GUTS_PMUXCR_SSI2_MASK 0x00003000 /* Bitmask for SSI2 */ -#define CCSR_GUTS_PMUXCR_SSI2_LA 0x00000000 /* Latched address */ -#define CCSR_GUTS_PMUXCR_SSI2_HI 0x00001000 /* High impedance */ -#define CCSR_GUTS_PMUXCR_SSI2_SSI 0x00002000 /* Used for SSI2 */ -#define CCSR_GUTS_PMUXCR_LA_22_25_LA 0x00000000 /* Latched Address */ -#define CCSR_GUTS_PMUXCR_LA_22_25_HI 0x00000400 /* High impedance */ -#define CCSR_GUTS_PMUXCR_DBGDRV 0x00000200 /* Signals not driven */ -#define CCSR_GUTS_PMUXCR_DMA2_0 0x00000008 -#define CCSR_GUTS_PMUXCR_DMA2_3 0x00000004 -#define CCSR_GUTS_PMUXCR_DMA1_0 0x00000002 -#define CCSR_GUTS_PMUXCR_DMA1_3 0x00000001 - -/* - * Set the DMA external control bits in the GUTS - * - * The DMA external control bits in the PMUXCR are only meaningful for - * channels 0 and 3. Any other channels are ignored. - * - * guts: Pointer to GUTS structure - * co: The DMA controller (0 or 1) - * ch: The channel on the DMA controller (0, 1, 2, or 3) - * value: the new value for the bit (0 or 1) - */ -static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts, - unsigned int co, unsigned int ch, unsigned int value) -{ - if ((ch == 0) || (ch == 3)) { - unsigned int shift = 2 * (co + 1) - (ch & 1) - 1; - - clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift); - } -} - -#define CCSR_GUTS_CLKDVDR_PXCKEN 0x80000000 -#define CCSR_GUTS_CLKDVDR_SSICKEN 0x20000000 -#define CCSR_GUTS_CLKDVDR_PXCKINV 0x10000000 -#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25 -#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK 0x06000000 -#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \ - (((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT) -#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT 16 -#define CCSR_GUTS_CLKDVDR_PXCLK_MASK 0x001F0000 -#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT) -#define CCSR_GUTS_CLKDVDR_SSICLK_MASK 0x000000FF -#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK) - -#endif /* __ASM_POWERPC_IMMAP_86XX_H__ */ -#endif /* __KERNEL__ */ -- cgit v1.2.3 From ff71334a46844d0ae6ff0055c549790bcd27bb10 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Wed, 4 Aug 2010 17:51:08 -0500 Subject: asoc/multi-component: fsl: add support for disabled SSI nodes Add support for adding "status = disabled" to an SSI node to incidate that it is not wired on the board. This replaces the not-so-intuitive previous method of omitting a codec-handle property. Signed-off-by: Timur Tabi Acked-by: Kumar Gala Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- arch/powerpc/boot/dts/mpc8610_hpcd.dts | 1 + sound/soc/fsl/fsl_ssi.c | 13 ++++++++++--- 2 files changed, 11 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index 9535ce68caae..83c3218cb4da 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -286,6 +286,7 @@ ssi@16100 { compatible = "fsl,mpc8610-ssi"; + status = "disabled"; cell-index = <1>; reg = <0x16100 0x100>; interrupt-parent = <&mpic>; diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 00e3e625b52a..7939c337ed9d 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -625,12 +625,19 @@ static int __devinit fsl_ssi_probe(struct of_device *of_dev, struct resource res; char name[64]; - /* We are only interested in SSIs with a codec phandle in them, so let's - * make sure this SSI has one. + /* SSIs that are not connected on the board should have a + * status = "disabled" + * property in their device tree nodes. */ - if (!of_get_property(np, "codec-handle", NULL)) + if (!of_device_is_available(np)) return -ENODEV; + /* Check for a codec-handle property. */ + if (!of_get_property(np, "codec-handle", NULL)) { + dev_err(&of_dev->dev, "missing codec-handle property\n"); + return -ENODEV; + } + /* We only support the SSI in "I2S Slave" mode */ sprop = of_get_property(np, "fsl,mode", NULL); if (!sprop || strcmp(sprop, "i2s-slave")) { -- cgit v1.2.3 From 2c184cd393d1410bb43ac656a6480849fe886b1d Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 7 Oct 2010 09:36:43 +0000 Subject: powerpc/85xx: add DIU support to the Freecale P1022DS reference board The Freescale P1022DS has an on-chip video controller called the DIU, and a driver for this device already exists. Update the platform file for the P1022DS reference board to enable the driver, and update the defconfig for Freescale MPC85xx boards to add the driver. [Edited to resolve header add/add conflict and drop #define DEBUG. -- broonie] Signed-off-by: Timur Tabi Acked-by: Kumar Gala Signed-off-by: Mark Brown --- arch/powerpc/configs/mpc85xx_defconfig | 3 + arch/powerpc/configs/mpc85xx_smp_defconfig | 3 + arch/powerpc/platforms/85xx/p1022_ds.c | 212 ++++++++++++++++++++++++++++- 3 files changed, 216 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index c3b113b2ca31..3aeb5949cfef 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -124,6 +124,9 @@ CONFIG_I2C_CPM=m CONFIG_I2C_MPC=y # CONFIG_HWMON is not set CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +CONFIG_FB_FSL_DIU=y +# CONFIG_VGA_CONSOLE is not set CONFIG_SOUND=y CONFIG_SND=y # CONFIG_SND_SUPPORT_OLD_API is not set diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index a075da2ea3fb..d62c8016f4bc 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -126,6 +126,9 @@ CONFIG_I2C_CPM=m CONFIG_I2C_MPC=y # CONFIG_HWMON is not set CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +CONFIG_FB_FSL_DIU=y +# CONFIG_VGA_CONSOLE is not set CONFIG_SOUND=y CONFIG_SND=y # CONFIG_SND_SUPPORT_OLD_API is not set diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index e1467c937450..e984d4ea351a 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -8,7 +8,6 @@ * Copyright 2010 Freescale Semiconductor, Inc. * * This file is taken from the Freescale P1022DS BSP, with modifications: - * 1) No DIU support (pending rewrite of DIU code) * 2) No AMP support * 3) No PCI endpoint support * @@ -20,12 +19,212 @@ #include #include #include - +#include +#include #include #include #include #include +#include + +#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) + +/* + * Board-specific initialization of the DIU. This code should probably be + * executed when the DIU is opened, rather than in arch code, but the DIU + * driver does not have a mechanism for this (yet). + * + * This is especially problematic on the P1022DS because the local bus (eLBC) + * and the DIU video signals share the same pins, which means that enabling the + * DIU will disable access to NOR flash. + */ + +/* DIU Pixel Clock bits of the CLKDVDR Global Utilities register */ +#define CLKDVDR_PXCKEN 0x80000000 +#define CLKDVDR_PXCKINV 0x10000000 +#define CLKDVDR_PXCKDLY 0x06000000 +#define CLKDVDR_PXCLK_MASK 0x00FF0000 + +/* Some ngPIXIS register definitions */ +#define PX_BRDCFG1_DVIEN 0x80 +#define PX_BRDCFG1_DFPEN 0x40 +#define PX_BRDCFG1_BACKLIGHT 0x20 +#define PX_BRDCFG1_DDCEN 0x10 + +/* + * DIU Area Descriptor + * + * Note that we need to byte-swap the value before it's written to the AD + * register. So even though the registers don't look like they're in the same + * bit positions as they are on the MPC8610, the same value is written to the + * AD register on the MPC8610 and on the P1022. + */ +#define AD_BYTE_F 0x10000000 +#define AD_ALPHA_C_MASK 0x0E000000 +#define AD_ALPHA_C_SHIFT 25 +#define AD_BLUE_C_MASK 0x01800000 +#define AD_BLUE_C_SHIFT 23 +#define AD_GREEN_C_MASK 0x00600000 +#define AD_GREEN_C_SHIFT 21 +#define AD_RED_C_MASK 0x00180000 +#define AD_RED_C_SHIFT 19 +#define AD_PALETTE 0x00040000 +#define AD_PIXEL_S_MASK 0x00030000 +#define AD_PIXEL_S_SHIFT 16 +#define AD_COMP_3_MASK 0x0000F000 +#define AD_COMP_3_SHIFT 12 +#define AD_COMP_2_MASK 0x00000F00 +#define AD_COMP_2_SHIFT 8 +#define AD_COMP_1_MASK 0x000000F0 +#define AD_COMP_1_SHIFT 4 +#define AD_COMP_0_MASK 0x0000000F +#define AD_COMP_0_SHIFT 0 + +#define MAKE_AD(alpha, red, blue, green, size, c0, c1, c2, c3) \ + cpu_to_le32(AD_BYTE_F | (alpha << AD_ALPHA_C_SHIFT) | \ + (blue << AD_BLUE_C_SHIFT) | (green << AD_GREEN_C_SHIFT) | \ + (red << AD_RED_C_SHIFT) | (c3 << AD_COMP_3_SHIFT) | \ + (c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \ + (c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT)) + +/** + * p1022ds_get_pixel_format: return the Area Descriptor for a given pixel depth + * + * The Area Descriptor is a 32-bit value that determine which bits in each + * pixel are to be used for each color. + */ +static unsigned int p1022ds_get_pixel_format(unsigned int bits_per_pixel, + int monitor_port) +{ + switch (bits_per_pixel) { + case 32: + /* 0x88883316 */ + return MAKE_AD(3, 2, 0, 1, 3, 8, 8, 8, 8); + case 24: + /* 0x88082219 */ + return MAKE_AD(4, 0, 1, 2, 2, 0, 8, 8, 8); + case 16: + /* 0x65053118 */ + return MAKE_AD(4, 2, 1, 0, 1, 5, 6, 5, 0); + default: + pr_err("fsl-diu: unsupported pixel depth %u\n", bits_per_pixel); + return 0; + } +} + +/** + * p1022ds_set_gamma_table: update the gamma table, if necessary + * + * On some boards, the gamma table for some ports may need to be modified. + * This is not the case on the P1022DS, so we do nothing. +*/ +static void p1022ds_set_gamma_table(int monitor_port, char *gamma_table_base) +{ +} + +/** + * p1022ds_set_monitor_port: switch the output to a different monitor port + * + */ +static void p1022ds_set_monitor_port(int monitor_port) +{ + struct device_node *pixis_node; + u8 __iomem *brdcfg1; + + pixis_node = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis"); + if (!pixis_node) { + pr_err("p1022ds: missing ngPIXIS node\n"); + return; + } + + brdcfg1 = of_iomap(pixis_node, 0); + if (!brdcfg1) { + pr_err("p1022ds: could not map ngPIXIS registers\n"); + return; + } + brdcfg1 += 9; /* BRDCFG1 is at offset 9 in the ngPIXIS */ + + switch (monitor_port) { + case 0: /* DVI */ + /* Enable the DVI port, disable the DFP and the backlight */ + clrsetbits_8(brdcfg1, PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT, + PX_BRDCFG1_DVIEN); + break; + case 1: /* Single link LVDS */ + /* Enable the DFP port, disable the DVI and the backlight */ + clrsetbits_8(brdcfg1, PX_BRDCFG1_DVIEN | PX_BRDCFG1_BACKLIGHT, + PX_BRDCFG1_DFPEN); + break; + default: + pr_err("p1022ds: unsupported monitor port %i\n", monitor_port); + } +} + +/** + * p1022ds_set_pixel_clock: program the DIU's clock + * + * @pixclock: the wavelength, in picoseconds, of the clock + */ +void p1022ds_set_pixel_clock(unsigned int pixclock) +{ + struct device_node *guts_np = NULL; + struct ccsr_guts_85xx __iomem *guts; + unsigned long freq; + u64 temp; + u32 pxclk; + + /* Map the global utilities registers. */ + guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts"); + if (!guts_np) { + pr_err("p1022ds: missing global utilties device node\n"); + return; + } + + guts = of_iomap(guts_np, 0); + of_node_put(guts_np); + if (!guts) { + pr_err("p1022ds: could not map global utilties device\n"); + return; + } + + /* Convert pixclock from a wavelength to a frequency */ + temp = 1000000000000ULL; + do_div(temp, pixclock); + freq = temp; + + /* pixclk is the ratio of the platform clock to the pixel clock */ + pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq); + + /* Disable the pixel clock, and set it to non-inverted and no delay */ + clrbits32(&guts->clkdvdr, + CLKDVDR_PXCKEN | CLKDVDR_PXCKDLY | CLKDVDR_PXCLK_MASK); + + /* Enable the clock and set the pxclk */ + setbits32(&guts->clkdvdr, CLKDVDR_PXCKEN | (pxclk << 16)); +} + +/** + * p1022ds_show_monitor_port: show the current monitor + * + * This function returns a string indicating whether the current monitor is + * set to DVI or LVDS. + */ +ssize_t p1022ds_show_monitor_port(int monitor_port, char *buf) +{ + return sprintf(buf, "%c0 - DVI\n%c1 - Single link LVDS\n", + monitor_port == 0 ? '*' : ' ', monitor_port == 1 ? '*' : ' '); +} + +/** + * p1022ds_set_sysfs_monitor_port: set the monitor port for sysfs + */ +int p1022ds_set_sysfs_monitor_port(int val) +{ + return val < 2 ? val : 0; +} + +#endif void __init p1022_ds_pic_init(void) { @@ -92,6 +291,15 @@ static void __init p1022_ds_setup_arch(void) } #endif +#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) + diu_ops.get_pixel_format = p1022ds_get_pixel_format; + diu_ops.set_gamma_table = p1022ds_set_gamma_table; + diu_ops.set_monitor_port = p1022ds_set_monitor_port; + diu_ops.set_pixel_clock = p1022ds_set_pixel_clock; + diu_ops.show_monitor_port = p1022ds_show_monitor_port; + diu_ops.set_sysfs_monitor_port = p1022ds_set_sysfs_monitor_port; +#endif + #ifdef CONFIG_SMP mpc85xx_smp_init(); #endif -- cgit v1.2.3