From bd792aea441a3dcdede462486ab8c63045803844 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Sep 2010 16:12:58 +0900 Subject: sh: pci: Support ports with disabled links on SH7786 PCIe. Presently we error out if a link is disabled and simply drop the port registration outright. This follows the PPC changes and simply reports on the link state on boot, leaving the port registered, in order to more easily deal with hotplug on future parts. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/pcie-sh7786.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'arch/sh/drivers') diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c index 21854ebbaa7c..aacd0fc4cdd5 100644 --- a/arch/sh/drivers/pci/pcie-sh7786.c +++ b/arch/sh/drivers/pci/pcie-sh7786.c @@ -341,9 +341,12 @@ static int pcie_init(struct sh7786_pcie_port *port) data |= PCIEMACCTLR_SCR_DIS | (0xff << 16); pci_write_reg(chan, data, SH4A_PCIEMACCTLR); + /* + * This will timeout if we don't have a link, but we permit the + * port to register anyways in order to support hotplug on future + * hardware. + */ ret = pci_wait_for_irq(chan, MASK_INT_TX_CTRL); - if (unlikely(ret != 0)) - return -ENODEV; data = pci_read_reg(chan, SH4A_PCIEPCICONF1); data &= ~(PCI_STATUS_DEVSEL_MASK << 16); @@ -356,9 +359,13 @@ static int pcie_init(struct sh7786_pcie_port *port) wmb(); - data = pci_read_reg(chan, SH4A_PCIEMACSR); - printk(KERN_NOTICE "PCI: PCIe#%d link width %d\n", - port->index, (data >> 20) & 0x3f); + if (ret == 0) { + data = pci_read_reg(chan, SH4A_PCIEMACSR); + printk(KERN_NOTICE "PCI: PCIe#%d x%d link detected\n", + port->index, (data >> 20) & 0x3f); + } else + printk(KERN_NOTICE "PCI: PCIe#%d link down\n", + port->index); for (i = win = 0; i < chan->nr_resources; i++) { struct resource *res = chan->resources + i; -- cgit v1.2.3