From 1d0c1aadf1fd9f3de95d1532b3651e8634546e71 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Tue, 21 Jun 2022 10:45:09 +0200 Subject: ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15 The USBH composed of EHCI and OHCI controllers needs the PHY clock to be initialized first, before enabling (gating) them. The reverse is also required when going to suspend. So, add USBPHY clock as 1st entry in both controllers, so the USBPHY PLL gets enabled 1st upon controller init. Upon suspend/resume, this also makes the clock to be disabled/re-enabled in the correct order. This fixes some IRQ storm conditions seen when going to low-power, due to PHY PLL being disabled before all clocks are cleanly gated. Fixes: 949a0c0dec85 ("ARM: dts: stm32: add USB Host (USBH) support to stm32mp157c") Fixes: db7be2cb87ae ("ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151") Signed-off-by: Fabrice Gasnier Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp151.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index c50f38f539f2..e04dda5ddd95 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1474,7 +1474,7 @@ usbh_ohci: usb@5800c000 { compatible = "generic-ohci"; reg = <0x5800c000 0x1000>; - clocks = <&rcc USBH>, <&usbphyc>; + clocks = <&usbphyc>, <&rcc USBH>; resets = <&rcc USBH_R>; interrupts = ; status = "disabled"; @@ -1483,7 +1483,7 @@ usbh_ehci: usb@5800d000 { compatible = "generic-ehci"; reg = <0x5800d000 0x1000>; - clocks = <&rcc USBH>; + clocks = <&usbphyc>, <&rcc USBH>; resets = <&rcc USBH_R>; interrupts = ; companion = <&usbh_ohci>; -- cgit v1.2.3