From eeada9e89ff72cfb66e46d682bb3b8acdc0d95bd Mon Sep 17 00:00:00 2001
From: Ameya Palande
Date: Tue, 5 Jul 2011 03:38:22 -0700
Subject: omap: rx51: Platform support for lp5523 led chip

Platform support for lp5523 led chip

Signed-off-by: Ameya Palande <ameya.palande@nokia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c | 66 ++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 5e559dda3cc3..c1938dffb946 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -39,6 +39,7 @@
 #include <sound/tpa6130a2-plat.h>
 #include <media/radio-si4713.h>
 #include <media/si4713.h>
+#include <linux/leds-lp5523.h>
 
 #include <../drivers/staging/iio/light/tsl2563.h>
 
@@ -53,6 +54,7 @@
 #define RX51_WL1251_IRQ_GPIO		42
 #define RX51_FMTX_RESET_GPIO		163
 #define RX51_FMTX_IRQ			53
+#define RX51_LP5523_CHIP_EN_GPIO	41
 
 #define RX51_USB_TRANSCEIVER_RST_GPIO	67
 
@@ -71,6 +73,64 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
 };
 #endif
 
+#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
+static struct lp5523_led_config rx51_lp5523_led_config[] = {
+	{
+		.chan_nr	= 0,
+		.led_current	= 50,
+	}, {
+		.chan_nr	= 1,
+		.led_current	= 50,
+	}, {
+		.chan_nr	= 2,
+		.led_current	= 50,
+	}, {
+		.chan_nr	= 3,
+		.led_current	= 50,
+	}, {
+		.chan_nr	= 4,
+		.led_current	= 50,
+	}, {
+		.chan_nr	= 5,
+		.led_current	= 50,
+	}, {
+		.chan_nr	= 6,
+		.led_current	= 50,
+	}, {
+		.chan_nr	= 7,
+		.led_current	= 50,
+	}, {
+		.chan_nr	= 8,
+		.led_current	= 50,
+	}
+};
+
+static int rx51_lp5523_setup(void)
+{
+	return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT,
+			"lp5523_enable");
+}
+
+static void rx51_lp5523_release(void)
+{
+	gpio_free(RX51_LP5523_CHIP_EN_GPIO);
+}
+
+static void rx51_lp5523_enable(bool state)
+{
+	gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state);
+}
+
+static struct lp5523_platform_data rx51_lp5523_platform_data = {
+	.led_config		= rx51_lp5523_led_config,
+	.num_channels		= ARRAY_SIZE(rx51_lp5523_led_config),
+	.clock_mode		= LP5523_CLOCK_AUTO,
+	.setup_resources	= rx51_lp5523_setup,
+	.release_resources	= rx51_lp5523_release,
+	.enable			= rx51_lp5523_enable,
+};
+#endif
+
 static struct omap2_mcspi_device_config wl1251_mcspi_config = {
 	.turbo_mode	= 0,
 	.single_channel	= 1,
@@ -832,6 +892,12 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
 		I2C_BOARD_INFO("tsl2563", 0x29),
 		.platform_data = &rx51_tsl2563_platform_data,
 	},
+#endif
+#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
+	{
+		I2C_BOARD_INFO("lp5523", 0x32),
+		.platform_data  = &rx51_lp5523_platform_data,
+	},
 #endif
 	{
 		I2C_BOARD_INFO("tpa6130a2", 0x60),
-- 
cgit v1.2.3


From 094fc5593174e48366804484e2070f178a5317cb Mon Sep 17 00:00:00 2001
From: Kalle Jokiniemi
Date: Tue, 5 Jul 2011 03:38:22 -0700
Subject: OMAP3: rx-51: Add full regulator definitions

The vaux2 (VCSI) regulator is left on by the bootloader
in rx-51. Since there the product has shipped and there
won't be any bootloader updates to fix this issue, we
need to define all the regulators and declare full
constraints for the regulator FW. This will allow the
regulator FW to disable unused regulators.

Also this helps in adding more fine grain regulator
support for rx-51 in the future.

Thanks for Mark Brown for pointing out the correct
solution.

Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@nokia.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c | 69 ++++++++++++++++++++++++++++
 1 file changed, 69 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index c1938dffb946..7d3775425170 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -563,6 +563,32 @@ static struct regulator_init_data rx51_vmmc2 = {
 	.consumer_supplies	= rx51_vmmc2_supplies,
 };
 
+static struct regulator_init_data rx51_vpll1 = {
+	.constraints = {
+		.name			= "VPLL",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.always_on		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
+	},
+};
+
+static struct regulator_init_data rx51_vpll2 = {
+	.constraints = {
+		.name			= "VSDI_CSI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.always_on		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
+	},
+};
+
 static struct regulator_init_data rx51_vsim = {
 	.constraints = {
 		.name			= "VMMC2_IO_18",
@@ -607,6 +633,43 @@ static struct regulator_init_data rx51_vio = {
 	.consumer_supplies	= rx51_vio_supplies,
 };
 
+static struct regulator_init_data rx51_vintana1 = {
+	.constraints = {
+		.name			= "VINTANA1",
+		.min_uV			= 1500000,
+		.max_uV			= 1500000,
+		.always_on		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
+	},
+};
+
+static struct regulator_init_data rx51_vintana2 = {
+	.constraints = {
+		.name			= "VINTANA2",
+		.min_uV			= 2750000,
+		.max_uV			= 2750000,
+		.apply_uV		= true,
+		.always_on		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
+	},
+};
+
+static struct regulator_init_data rx51_vintdig = {
+	.constraints = {
+		.name			= "VINTDIG",
+		.min_uV			= 1500000,
+		.max_uV			= 1500000,
+		.always_on		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
+	},
+};
+
 static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = {
 	.gpio_reset	= RX51_FMTX_RESET_GPIO,
 };
@@ -853,8 +916,13 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
 	.vaux2			= &rx51_vaux2,
 	.vaux4			= &rx51_vaux4,
 	.vmmc1			= &rx51_vmmc1,
+	.vpll1			= &rx51_vpll1,
+	.vpll2			= &rx51_vpll2,
 	.vsim			= &rx51_vsim,
 	.vdac			= &rx51_vdac,
+	.vintana1		= &rx51_vintana1,
+	.vintana2		= &rx51_vintana2,
+	.vintdig		= &rx51_vintdig,
 	.vio			= &rx51_vio,
 };
 
@@ -1042,6 +1110,7 @@ error:
 void __init rx51_peripherals_init(void)
 {
 	rx51_i2c_init();
+	regulator_has_full_constraints();
 	gpmc_onenand_init(board_onenand_data);
 	board_smc91x_init();
 	rx51_add_gpio_keys();
-- 
cgit v1.2.3


From 5fe8b4c19dc24e3bb873daf9e96a2439a83bbd79 Mon Sep 17 00:00:00 2001
From: Joel A Fernandes
Date: Tue, 5 Jul 2011 03:38:22 -0700
Subject: OMAP3: beagle: add support for beagleboard xM revision C

OMAP3: beagle: add support for beagleboard xM revision C

The USB enable GPIO has been in beagleboard xM revision C.
The USER button has been moved since beagleboard xM.
Also, board specific initialization has been moved to beagle_config struct
and initialized in omap3_beagle_init_rev. Default values in struct are for xMC.

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3beagle.c | 78 +++++++++++++++++++++------------
 1 file changed, 51 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 2d8dfb3213bf..78cf5f221f83 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -60,7 +60,8 @@
  *	AXBX	= GPIO173, GPIO172, GPIO171: 1 1 1
  *	C1_3	= GPIO173, GPIO172, GPIO171: 1 1 0
  *	C4	= GPIO173, GPIO172, GPIO171: 1 0 1
- *	XM	= GPIO173, GPIO172, GPIO171: 0 0 0
+ *	XMA/XMB = GPIO173, GPIO172, GPIO171: 0 0 0
+ *	XMC = GPIO173, GPIO172, GPIO171: 0 1 0
  */
 enum {
 	OMAP3BEAGLE_BOARD_UNKN = 0,
@@ -68,14 +69,26 @@ enum {
 	OMAP3BEAGLE_BOARD_C1_3,
 	OMAP3BEAGLE_BOARD_C4,
 	OMAP3BEAGLE_BOARD_XM,
+	OMAP3BEAGLE_BOARD_XMC,
 };
 
 static u8 omap3_beagle_version;
 
-static u8 omap3_beagle_get_rev(void)
-{
-	return omap3_beagle_version;
-}
+/*
+ * Board-specific configuration
+ * Defaults to BeagleBoard-xMC
+ */
+static struct {
+	int mmc1_gpio_wp;
+	int usb_pwr_level;
+	int reset_gpio;
+	int usr_button_gpio;
+} beagle_config = {
+	.mmc1_gpio_wp = -EINVAL,
+	.usb_pwr_level = GPIOF_OUT_INIT_LOW,
+	.reset_gpio = 129,
+	.usr_button_gpio = 4,
+};
 
 static struct gpio omap3_beagle_rev_gpios[] __initdata = {
 	{ 171, GPIOF_IN, "rev_id_0"    },
@@ -110,18 +123,32 @@ static void __init omap3_beagle_init_rev(void)
 	case 7:
 		printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
+		beagle_config.mmc1_gpio_wp = 29;
+		beagle_config.reset_gpio = 170;
+		beagle_config.usr_button_gpio = 7;
 		break;
 	case 6:
 		printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
+		beagle_config.mmc1_gpio_wp = 23;
+		beagle_config.reset_gpio = 170;
+		beagle_config.usr_button_gpio = 7;
 		break;
 	case 5:
 		printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
+		beagle_config.mmc1_gpio_wp = 23;
+		beagle_config.reset_gpio = 170;
+		beagle_config.usr_button_gpio = 7;
 		break;
 	case 0:
-		printk(KERN_INFO "OMAP3 Beagle Rev: xM\n");
+		printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
+		beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH;
+		break;
+	case 2:
+		printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n");
+		omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
 		break;
 	default:
 		printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
@@ -234,7 +261,7 @@ static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_wp	= 29,
+		.gpio_wp	= -EINVAL,
 	},
 	{}	/* Terminator */
 };
@@ -252,17 +279,11 @@ static struct gpio_led gpio_leds[];
 static int beagle_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
-	int r, usb_pwr_level;
-
-	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
-		mmc[0].gpio_wp = -EINVAL;
-	} else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) ||
-		(omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) {
-		omap_mux_init_gpio(23, OMAP_PIN_INPUT);
-		mmc[0].gpio_wp = 23;
-	} else {
-		omap_mux_init_gpio(29, OMAP_PIN_INPUT);
-	}
+	int r;
+
+	if (beagle_config.mmc1_gpio_wp != -EINVAL)
+		omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
+	mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
@@ -272,9 +293,8 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	 * high / others active low)
 	 * DVI reset GPIO is different between beagle revisions
 	 */
-	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
-		usb_pwr_level = GPIOF_OUT_INIT_HIGH;
-		beagle_dvi_device.reset_gpio = 129;
+	/* Valid for all -xM revisions */
+	if (cpu_is_omap3630()) {
 		/*
 		 * gpio + 1 on Xm controls the TFP410's enable line (active low)
 		 * gpio + 2 control varies depending on the board rev as below:
@@ -292,8 +312,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
 			pr_err("%s: unable to configure DVI_LDO_EN\n",
 				__func__);
 	} else {
-		usb_pwr_level = GPIOF_OUT_INIT_LOW;
-		beagle_dvi_device.reset_gpio = 170;
 		/*
 		 * REVISIT: need ehci-omap hooks for external VBUS
 		 * power switch and overcurrent detect
@@ -301,8 +319,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
 		if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
 			pr_err("%s: unable to configure EHCI_nOC\n", __func__);
 	}
+	beagle_dvi_device.reset_gpio = beagle_config.reset_gpio;
 
-	gpio_request_one(gpio + TWL4030_GPIO_MAX, usb_pwr_level, "nEN_USB_PWR");
+	gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
+			"nEN_USB_PWR");
 
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
@@ -454,7 +474,8 @@ static struct platform_device leds_gpio = {
 static struct gpio_keys_button gpio_buttons[] = {
 	{
 		.code			= BTN_EXTRA,
-		.gpio			= 7,
+		/* Dynamically assigned depending on board */
+		.gpio			= -EINVAL,
 		.desc			= "user",
 		.wakeup			= 1,
 	},
@@ -518,8 +539,8 @@ static void __init beagle_opp_init(void)
 		return;
 	}
 
-	/* Custom OPP enabled for XM */
-	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+	/* Custom OPP enabled for all xM versions */
+	if (cpu_is_omap3630()) {
 		struct omap_hwmod *mh = omap_hwmod_lookup("mpu");
 		struct omap_hwmod *dh = omap_hwmod_lookup("iva");
 		struct device *dev;
@@ -559,6 +580,9 @@ static void __init omap3_beagle_init(void)
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3_beagle_init_rev();
 	omap3_beagle_i2c_init();
+
+	gpio_buttons[0].gpio = beagle_config.usr_button_gpio;
+
 	platform_add_devices(omap3_beagle_devices,
 			ARRAY_SIZE(omap3_beagle_devices));
 	omap_display_init(&beagle_dss_data);
-- 
cgit v1.2.3


From c31469747854a1f1dcfd81a8fb1d9865c3ee58b9 Mon Sep 17 00:00:00 2001
From: Igor Grinberg
Date: Tue, 5 Jul 2011 03:38:23 -0700
Subject: arm: omap3: cm-t35: add support for cm-t3730

cm-t3730 is basically the same board as cm-t35,
but has AM/DM3730 SoC assembled and therefore some changes are required.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Mike Rapoport <mike@compulab.co.il>
[tony@atomide.com: updated for init_irq cleanup as noted by khilman@ti.com]
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig                  |  6 ++-
 arch/arm/mach-omap2/board-cm-t35.c           | 77 ++++++++++++++++++++++------
 arch/arm/plat-omap/include/plat/uncompress.h |  1 +
 3 files changed, 67 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 19d5891c48e3..4ae6257b39a4 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -266,9 +266,10 @@ config MACH_OMAP_ZOOM3
 	select REGULATOR_FIXED_VOLTAGE
 
 config MACH_CM_T35
-	bool "CompuLab CM-T35 module"
+	bool "CompuLab CM-T35/CM-T3730 modules"
 	depends on ARCH_OMAP3
 	default y
+	select MACH_CM_T3730
 	select OMAP_PACKAGE_CUS
 
 config MACH_CM_T3517
@@ -277,6 +278,9 @@ config MACH_CM_T3517
 	default y
 	select OMAP_PACKAGE_CBB
 
+config MACH_CM_T3730
+       bool
+
 config MACH_IGEP0020
 	bool "IGEP v2 board"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 9d585ca3941d..fcd403224f98 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -1,5 +1,5 @@
 /*
- * board-cm-t35.c (CompuLab CM-T35 module)
+ * CompuLab CM-T35/CM-T3730 modules support
  *
  * Copyright (C) 2009-2011 CompuLab, Ltd.
  * Authors: Mike Rapoport <mike@compulab.co.il>
@@ -570,17 +570,11 @@ static struct omap_board_mux board_mux[] __initdata = {
 	OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
 	OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
 
-	/* DSS */
+	/* common DSS */
 	OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
 	OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
 	OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
 	OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
 	OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
 	OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
 	OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
@@ -593,12 +587,6 @@ static struct omap_board_mux board_mux[] __initdata = {
 	OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
 	OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
 	OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
 
 	/* display controls */
 	OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
@@ -611,19 +599,53 @@ static struct omap_board_mux board_mux[] __initdata = {
 
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
+
+static void __init cm_t3x_common_dss_mux_init(int mux_mode)
+{
+	omap_mux_init_signal("dss_data18", mux_mode);
+	omap_mux_init_signal("dss_data19", mux_mode);
+	omap_mux_init_signal("dss_data20", mux_mode);
+	omap_mux_init_signal("dss_data21", mux_mode);
+	omap_mux_init_signal("dss_data22", mux_mode);
+	omap_mux_init_signal("dss_data23", mux_mode);
+}
+
+static void __init cm_t35_init_mux(void)
+{
+	omap_mux_init_signal("gpio_70", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("gpio_71", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("gpio_72", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("gpio_73", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("gpio_74", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("gpio_75", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+	cm_t3x_common_dss_mux_init(OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+}
+
+static void __init cm_t3730_init_mux(void)
+{
+	omap_mux_init_signal("sys_boot0", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sys_boot1", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sys_boot3", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sys_boot4", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sys_boot5", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sys_boot6", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+	cm_t3x_common_dss_mux_init(OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+}
+#else
+static inline void cm_t35_init_mux(void) {}
+static inline void cm_t3730_init_mux(void) {}
 #endif
 
 static struct omap_board_config_kernel cm_t35_config[] __initdata = {
 };
 
-static void __init cm_t35_init(void)
+static void __init cm_t3x_common_init(void)
 {
 	omap_board_config = cm_t35_config;
 	omap_board_config_size = ARRAY_SIZE(cm_t35_config);
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
 	omap_serial_init();
 	cm_t35_init_i2c();
-	cm_t35_init_nand();
 	omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
 	cm_t35_init_ethernet();
 	cm_t35_init_led();
@@ -633,6 +655,19 @@ static void __init cm_t35_init(void)
 	usbhs_init(&usbhs_bdata);
 }
 
+static void __init cm_t35_init(void)
+{
+	cm_t3x_common_init();
+	cm_t35_init_mux();
+	cm_t35_init_nand();
+}
+
+static void __init cm_t3730_init(void)
+{
+	cm_t3x_common_init();
+	cm_t3730_init_mux();
+}
+
 MACHINE_START(CM_T35, "Compulab CM-T35")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
@@ -642,3 +677,13 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
 	.init_machine	= cm_t35_init,
 	.timer		= &omap3_timer,
 MACHINE_END
+
+MACHINE_START(CM_T3730, "Compulab CM-T3730")
+	.boot_params    = 0x80000100,
+	.reserve        = omap_reserve,
+	.map_io         = omap3_map_io,
+	.init_early     = cm_t35_init_early,
+	.init_irq       = omap3_init_irq,
+	.init_machine   = cm_t3730_init,
+	.timer          = &omap3_timer,
+MACHINE_END
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index ac4b60d9aa29..a067484cc4a2 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -148,6 +148,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		/* omap3 based boards using UART3 */
 		DEBUG_LL_OMAP3(3, cm_t35);
 		DEBUG_LL_OMAP3(3, cm_t3517);
+		DEBUG_LL_OMAP3(3, cm_t3730);
 		DEBUG_LL_OMAP3(3, craneboard);
 		DEBUG_LL_OMAP3(3, devkit8000);
 		DEBUG_LL_OMAP3(3, igep0020);
-- 
cgit v1.2.3


From 27a69d709e63efc23df18cc411fa341749de750e Mon Sep 17 00:00:00 2001
From: Silesh C V
Date: Tue, 5 Jul 2011 03:38:23 -0700
Subject: omap: 4430SDP: Register the card detect GPIO properly

Without this the HSMMC driver takes GPIO 0 to be the card detect gpio
and requests/configures it. This will give rise to issues when another
driver needs to use GPIO 0. On 4430SDP, the card detection is through
TWL 6030.

Signed-off-by: Silesh C V <silesh@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-4430sdp.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index d7df07ef2cea..5e03ddb0eb17 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -323,6 +323,7 @@ static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
 	},
 	{}	/* Terminator */
-- 
cgit v1.2.3


From 6de8bae86c0459a881cead6735cd6971334cadd3 Mon Sep 17 00:00:00 2001
From: Vishal Mahaveer
Date: Tue, 5 Jul 2011 03:38:23 -0700
Subject: omap: blaze: add mmc5/wl1283 device support

Add MMC5 support on BLAZE, which has the wl1283 device hardwired to.

The wl1283 is a 4-wire, 1.8V, embedded SDIO WLAN device with an external IRQ line,
and power-controlled by a GPIO-based fixed regulator.

Based on the patch for zoom by Ohad Ben-Cohen <ohad@wizery.com>

Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
[tony@atomide.com: improved formatting a bit]
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-4430sdp.c | 81 +++++++++++++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 5e03ddb0eb17..e5e8bbb00359 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -22,6 +22,7 @@
 #include <linux/i2c/twl.h>
 #include <linux/gpio_keys.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 #include <linux/leds.h>
 #include <linux/leds_pwm.h>
 
@@ -37,6 +38,7 @@
 #include <plat/mmc.h>
 #include <plat/omap4-keypad.h>
 #include <video/omapdss.h>
+#include <linux/wl12xx.h>
 
 #include "mux.h"
 #include "hsmmc.h"
@@ -51,6 +53,9 @@
 #define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
 #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
 
+#define GPIO_WIFI_PMENA		54
+#define GPIO_WIFI_IRQ		53
+
 static const int sdp4430_keymap[] = {
 	KEY(0, 0, KEY_E),
 	KEY(0, 1, KEY_R),
@@ -326,6 +331,14 @@ static struct omap2_hsmmc_info mmc[] = {
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
 	},
+	{
+		.mmc		= 5,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.ocr_mask	= MMC_VDD_165_195,
+		.nonremovable	= true,
+	},
 	{}	/* Terminator */
 };
 
@@ -337,6 +350,37 @@ static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
+static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = {
+	.supply = "vmmc",
+	.dev_name = "omap_hsmmc.4",
+};
+
+static struct regulator_init_data sdp4430_vmmc5 = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &omap4_sdp4430_vmmc5_supply,
+};
+
+static struct fixed_voltage_config sdp4430_vwlan = {
+	.supply_name		= "vwl1271",
+	.microvolts		= 1800000, /* 1.8V */
+	.gpio			= GPIO_WIFI_PMENA,
+	.startup_delay		= 70000, /* 70msec */
+	.enable_high		= 1,
+	.enabled_at_boot	= 0,
+	.init_data		= &sdp4430_vmmc5,
+};
+
+static struct platform_device omap_vwlan_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev = {
+		.platform_data = &sdp4430_vwlan,
+	},
+};
+
 static int omap4_twl6030_hsmmc_late_init(struct device *dev)
 {
 	int ret = 0;
@@ -511,6 +555,7 @@ static struct regulator_init_data sdp4430_vusb = {
 static struct regulator_init_data sdp4430_clk32kg = {
 	.constraints = {
 		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+		.always_on		= true,
 	},
 };
 
@@ -715,6 +760,41 @@ static inline void board_serial_init(void)
 }
  #endif
 
+static void omap4_sdp4430_wifi_mux_init(void)
+{
+	omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT |
+				OMAP_PIN_OFF_WAKEUPENABLE);
+	omap_mux_init_gpio(GPIO_WIFI_PMENA, OMAP_PIN_OUTPUT);
+
+	omap_mux_init_signal("sdmmc5_cmd.sdmmc5_cmd",
+				OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("sdmmc5_clk.sdmmc5_clk",
+				OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("sdmmc5_dat0.sdmmc5_dat0",
+				OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("sdmmc5_dat1.sdmmc5_dat1",
+				OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("sdmmc5_dat2.sdmmc5_dat2",
+				OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("sdmmc5_dat3.sdmmc5_dat3",
+				OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+
+}
+
+static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
+	.irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
+	.board_ref_clock = WL12XX_REFCLOCK_26,
+	.board_tcxo_clock = WL12XX_TCXOCLOCK_26,
+};
+
+static void omap4_sdp4430_wifi_init(void)
+{
+	omap4_sdp4430_wifi_mux_init();
+	if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data))
+		pr_err("Error setting wl12xx data\n");
+	platform_device_register(&omap_vwlan_device);
+}
+
 static void __init omap_4430sdp_init(void)
 {
 	int status;
@@ -731,6 +811,7 @@ static void __init omap_4430sdp_init(void)
 	omap_sfh7741prox_init();
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
 	board_serial_init();
+	omap4_sdp4430_wifi_init();
 	omap4_twl6030_hsmmc_init(mmc);
 
 	usb_musb_init(&musb_board_data);
-- 
cgit v1.2.3


From f67df6c670a8fcd3f63728afa2314e7eca653bd7 Mon Sep 17 00:00:00 2001
From: Shubhrajyoti Datta
Date: Tue, 5 Jul 2011 03:38:24 -0700
Subject: OMAP4: Keyboard: Mux changes in the board file

The mux settings for keypad  are done for omap4430sdp in
board file.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
[tony@atomide.com: improved formatting a bit]
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-4430sdp.c            | 67 +++++++++++++++++++++++++-
 arch/arm/mach-omap2/devices.c                  |  3 +-
 arch/arm/plat-omap/include/plat/omap4-keypad.h |  3 +-
 3 files changed, 70 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index e5e8bbb00359..f6efff5f1650 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -129,6 +129,64 @@ static const int sdp4430_keymap[] = {
 	KEY(7, 6, KEY_OK),
 	KEY(7, 7, KEY_DOWN),
 };
+static struct omap_device_pad keypad_pads[] __initdata = {
+	{	.name   = "kpd_col1.kpd_col1",
+		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+	},
+	{	.name   = "kpd_col1.kpd_col1",
+		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+	},
+	{	.name   = "kpd_col2.kpd_col2",
+		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+	},
+	{	.name   = "kpd_col3.kpd_col3",
+		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+	},
+	{	.name   = "kpd_col4.kpd_col4",
+		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+	},
+	{	.name   = "kpd_col5.kpd_col5",
+		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+	},
+	{	.name   = "gpmc_a23.kpd_col7",
+		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+	},
+	{	.name   = "gpmc_a22.kpd_col6",
+		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+	},
+	{	.name   = "kpd_row0.kpd_row0",
+		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+	},
+	{	.name   = "kpd_row1.kpd_row1",
+		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+	},
+	{	.name   = "kpd_row2.kpd_row2",
+		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+	},
+	{	.name   = "kpd_row3.kpd_row3",
+		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+	},
+	{	.name   = "kpd_row4.kpd_row4",
+		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+	},
+	{	.name   = "kpd_row5.kpd_row5",
+		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+	},
+	{	.name   = "gpmc_a18.kpd_row6",
+		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+	},
+	{	.name   = "gpmc_a19.kpd_row7",
+		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+	},
+};
 
 static struct matrix_keymap_data sdp4430_keymap_data = {
 	.keymap			= sdp4430_keymap,
@@ -140,6 +198,13 @@ static struct omap4_keypad_platform_data sdp4430_keypad_data = {
 	.rows			= 8,
 	.cols			= 8,
 };
+
+static struct omap_board_data keypad_data = {
+	.id	    		= 1,
+	.pads	 		= keypad_pads,
+	.pads_cnt       	= ARRAY_SIZE(keypad_pads),
+};
+
 static struct gpio_led sdp4430_gpio_leds[] = {
 	{
 		.name	= "omap4:green:debug0",
@@ -825,7 +890,7 @@ static void __init omap_4430sdp_init(void)
 				ARRAY_SIZE(sdp4430_spi_board_info));
 	}
 
-	status = omap4_keyboard_init(&sdp4430_keypad_data);
+	status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
 	if (status)
 		pr_err("Keypad initialization failed: %d\n", status);
 
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 5b8ca680ed93..1077ad663f93 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -230,7 +230,7 @@ struct omap_device_pm_latency omap_keyboard_latency[] = {
 };
 
 int __init omap4_keyboard_init(struct omap4_keypad_platform_data
-						*sdp4430_keypad_data)
+			*sdp4430_keypad_data, struct omap_board_data *bdata)
 {
 	struct omap_device *od;
 	struct omap_hwmod *oh;
@@ -257,6 +257,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
 						name, oh->name);
 		return PTR_ERR(od);
 	}
+	oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
 
 	return 0;
 }
diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h
index 2b1d9bc1eebb..9fe6c8783236 100644
--- a/arch/arm/plat-omap/include/plat/omap4-keypad.h
+++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h
@@ -10,5 +10,6 @@ struct omap4_keypad_platform_data {
 	u8 cols;
 };
 
-extern int omap4_keyboard_init(struct omap4_keypad_platform_data *);
+extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
+				struct omap_board_data *);
 #endif
-- 
cgit v1.2.3


From e1a3c74f52b02715599249e1a024e16419503d52 Mon Sep 17 00:00:00 2001
From: Mark Brown
Date: Fri, 6 May 2011 09:45:13 +0900
Subject: ARM: S3C64XX: Initial support for Wolfson/Simtec Cragganmore/Banff

The Cragganmore carrier card and Banff CPU module are used on Wolfson
Microelectronics reference systems.  This initial support covers the
core system which is a fairly generic S3C6410 based design, further
patches will add support for the key features of the reference system.

The initial board bringup and therefore much of the key code was done by
Ben Dooks for Simtec, with additional work (especially around the
integration of the Wolfson devices) being done by myself.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: removed inclusion of <mach/regs-fb.h>]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/Kconfig             |  23 ++
 arch/arm/mach-s3c64xx/Makefile            |   1 +
 arch/arm/mach-s3c64xx/include/mach/irqs.h |   4 +-
 arch/arm/mach-s3c64xx/mach-crag6410.c     | 574 ++++++++++++++++++++++++++++++
 4 files changed, 601 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-s3c64xx/mach-crag6410.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index e4177e22557b..4e2c371ff3d7 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -266,3 +266,26 @@ config MACH_SMARTQ7
 	select MACH_SMARTQ
 	help
 	    Machine support for the SmartQ 7
+
+config MACH_WLF_CRAGG_6410
+	bool "Wolfson Cragganmore 6410"
+	select CPU_S3C6410
+	select S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_I2C1
+	select S3C64XX_SETUP_IDE
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_KEYPAD
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_KEYPAD
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_USB_HSOTG
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_I2C1
+	select S3C_DEV_WDT
+	select S3C_DEV_RTC
+	select S3C64XX_DEV_SPI
+	select S3C24XX_GPIO_EXTRA128
+	help
+	  Machine support for the Wolfson Cragganmore S3C6410 variant.
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 4657363f0674..88d7fd22ef18 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
 obj-$(CONFIG_MACH_SMARTQ)	+= mach-smartq.o
 obj-$(CONFIG_MACH_SMARTQ5)	+= mach-smartq5.o
 obj-$(CONFIG_MACH_SMARTQ7)	+= mach-smartq7.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o
 
 # device support
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index 8e2df26cf14a..ddb63a1863ab 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -198,7 +198,9 @@
  * interrupt controllers). */
 #define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
 
-#ifdef CONFIG_SMDK6410_WM1190_EV1
+#ifdef CONFIG_MACH_WLF_CRAGG_6410
+#define IRQ_BOARD_NR 128
+#elif defined(CONFIG_SMDK6410_WM1190_EV1)
 #define IRQ_BOARD_NR 64
 #elif defined(CONFIG_SMDK6410_WM1192_EV1)
 #define IRQ_BOARD_NR 64
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
new file mode 100644
index 000000000000..970775363701
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -0,0 +1,574 @@
+/* linux/arch/arm/mach-s3c64xx/mach-crag6410.c
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *	Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * Copyright 2011 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/regulator/machine.h>
+#include <linux/pwm_backlight.h>
+#include <linux/dm9000.h>
+#include <linux/gpio_keys.h>
+#include <linux/basic_mmio_gpio.h>
+#include <linux/spi/spi.h>
+
+#include <linux/i2c/pca953x.h>
+
+#include <video/platform_lcd.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <mach/s3c6410.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
+
+#include <mach/gpio-bank-o.h>
+#include <mach/regs-gpio-memport.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/fb.h>
+#include <plat/sdhci.h>
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#include <plat/keypad.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/adc.h>
+#include <plat/iic.h>
+#include <plat/pm.h>
+
+#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START
+
+#define PCA935X_GPIO_BASE GPIO_BOARD_START
+#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
+
+/* serial port setup */
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg crag6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	= 0,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+	[1] = {
+		.hwport	= 1,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+	[2] = {
+		.hwport	= 2,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+	[3] = {
+		.hwport	= 3,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+};
+
+static struct platform_pwm_backlight_data crag6410_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 1000,
+	.dft_brightness	= 600,
+	.pwm_period_ns	= 100000,	/* about 1kHz */
+};
+
+static struct platform_device crag6410_backlight_device = {
+	.name		= "pwm-backlight",
+	.id		= -1,
+	.dev		= {
+		.parent	= &s3c_device_timer[0].dev,
+		.platform_data = &crag6410_backlight_data,
+	},
+};
+
+static void crag6410_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
+{
+	pr_debug("%s: setting power %d\n", __func__, power);
+
+	if (power) {
+		gpio_set_value(S3C64XX_GPB(0), 1);
+		msleep(1);
+		s3c_gpio_cfgpin(S3C64XX_GPF(14), S3C_GPIO_SFN(2));
+	} else {
+		gpio_direction_output(S3C64XX_GPF(14), 0);
+		gpio_set_value(S3C64XX_GPB(0), 0);
+	}
+}
+
+static struct platform_device crag6410_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.id			= -1,
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &(struct plat_lcd_data) {
+		.set_power	= crag6410_lcd_power_set,
+	},
+};
+
+/* 640x480 URT */
+static struct s3c_fb_pd_win crag6410_fb_win0 = {
+	/* this is to ensure we use win0 */
+	.win_mode	= {
+		.left_margin	= 150,
+		.right_margin	= 80,
+		.upper_margin	= 40,
+		.lower_margin	= 5,
+		.hsync_len	= 40,
+		.vsync_len	= 5,
+		.xres		= 640,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+	.virtual_y	= 480 * 2,
+	.virtual_x	= 640,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata crag6410_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &crag6410_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/* 2x6 keypad */
+
+static uint32_t crag6410_keymap[] __initdata = {
+	/* KEY(row, col, keycode) */
+	KEY(0, 0, KEY_VOLUMEUP),
+	KEY(0, 1, KEY_HOME),
+	KEY(0, 2, KEY_VOLUMEDOWN),
+	KEY(0, 3, KEY_HELP),
+	KEY(0, 4, KEY_MENU),
+	KEY(0, 5, KEY_MEDIA),
+	KEY(1, 0, 232),
+	KEY(1, 1, KEY_DOWN),
+	KEY(1, 2, KEY_LEFT),
+	KEY(1, 3, KEY_UP),
+	KEY(1, 4, KEY_RIGHT),
+	KEY(1, 5, KEY_CAMERA),
+};
+
+static struct matrix_keymap_data crag6410_keymap_data __initdata = {
+	.keymap		= crag6410_keymap,
+	.keymap_size	= ARRAY_SIZE(crag6410_keymap),
+};
+
+static struct samsung_keypad_platdata crag6410_keypad_data __initdata = {
+	.keymap_data	= &crag6410_keymap_data,
+	.rows		= 2,
+	.cols		= 6,
+};
+
+static struct gpio_keys_button crag6410_gpio_keys[] = {
+	[0] = {
+		.code	= KEY_SUSPEND,
+		.gpio	= S3C64XX_GPL(10),	/* EINT 18 */
+		.type	= EV_SW,
+		.wakeup	= 1,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_keys_platform_data crag6410_gpio_keydata = {
+	.buttons	= crag6410_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(crag6410_gpio_keys),
+};
+
+static struct platform_device crag6410_gpio_keydev = {
+	.name		= "gpio-keys",
+	.id		= 0,
+	.dev.platform_data = &crag6410_gpio_keydata,
+};
+
+static struct resource crag6410_dm9k_resource[] = {
+	[0] = {
+		.start	= S3C64XX_PA_XM0CSN5,
+		.end	= S3C64XX_PA_XM0CSN5 + 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= S3C64XX_PA_XM0CSN5 + (1 << 8),
+		.end	= S3C64XX_PA_XM0CSN5 + (1 << 8) + 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= S3C_EINT(17),
+		.end	= S3C_EINT(17),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct dm9000_plat_data mini6410_dm9k_pdata = {
+	.flags	= DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device crag6410_dm9k_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(crag6410_dm9k_resource),
+	.resource	= crag6410_dm9k_resource,
+	.dev.platform_data = &mini6410_dm9k_pdata,
+};
+
+static struct resource crag6410_mmgpio_resource[] = {
+	[0] = {
+		.start	= S3C64XX_PA_XM0CSN4 + 1,
+		.end	= S3C64XX_PA_XM0CSN4 + 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device crag6410_mmgpio = {
+	.name		= "basic-mmio-gpio",
+	.id		= -1,
+	.resource	= crag6410_mmgpio_resource,
+	.num_resources	= ARRAY_SIZE(crag6410_mmgpio_resource),
+	.dev.platform_data = &(struct bgpio_pdata) {
+		.base	= -1,
+	},
+};
+
+static struct platform_device *crag6410_devices[] __initdata = {
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_fb,
+	&s3c_device_ohci,
+	&s3c_device_usb_hsotg,
+	&s3c_device_adc,
+	&s3c_device_rtc,
+	&s3c_device_ts,
+	&s3c_device_timer[0],
+	&s3c64xx_device_iis0,
+	&s3c64xx_device_iis1,
+	&samsung_asoc_dma,
+	&samsung_device_keypad,
+	&crag6410_gpio_keydev,
+	&crag6410_dm9k_device,
+	&s3c64xx_device_spi0,
+	&crag6410_mmgpio,
+	&crag6410_lcd_powerdev,
+	&crag6410_backlight_device,
+};
+
+static struct pca953x_platform_data crag6410_pca_data = {
+	.gpio_base	= PCA935X_GPIO_BASE,
+	.irq_base	= 0,
+};
+
+static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
+	REGULATOR_SUPPLY("vddarm", NULL),
+};
+
+static struct regulator_init_data vddarm __initdata = {
+	.constraints = {
+		.name = "VDDARM",
+		.min_uV = 1000000,
+		.max_uV = 1300000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
+	.consumer_supplies = vddarm_consumers,
+};
+
+static struct regulator_init_data vddint __initdata = {
+	.constraints = {
+		.name = "VDDINT",
+		.min_uV = 1000000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+};
+
+static struct regulator_init_data vddmem __initdata = {
+	.constraints = {
+		.name = "VDDMEM",
+		.always_on = 1,
+	},
+};
+
+static struct regulator_init_data vddsys __initdata = {
+	.constraints = {
+		.name = "VDDSYS,VDDEXT,VDDPCM,VDDSS",
+		.always_on = 1,
+	},
+};
+
+static struct regulator_consumer_supply vddmmc_consumers[] __initdata = {
+	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.1"),
+	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
+};
+
+static struct regulator_init_data vddmmc __initdata = {
+	.constraints = {
+		.name = "VDDMMC,UH",
+		.always_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vddmmc_consumers),
+	.consumer_supplies = vddmmc_consumers,
+};
+
+static struct regulator_init_data vddotgi __initdata = {
+	.constraints = {
+		.name = "VDDOTGi",
+		.always_on = 1,
+	},
+};
+
+static struct regulator_init_data vddotg __initdata = {
+	.constraints = {
+		.name = "VDDOTG",
+		.always_on = 1,
+	},
+};
+
+static struct regulator_init_data vddhi __initdata = {
+	.constraints = {
+		.name = "VDDHI",
+		.always_on = 1,
+	},
+};
+
+static struct regulator_init_data vddadc __initdata = {
+	.constraints = {
+		.name = "VDDADC,VDDDAC",
+		.always_on = 1,
+	},
+};
+
+static struct regulator_init_data vddmem0 __initdata = {
+	.constraints = {
+		.name = "VDDMEM0",
+		.always_on = 1,
+	},
+};
+
+static struct regulator_init_data vddpll __initdata = {
+	.constraints = {
+		.name = "VDDPLL",
+		.always_on = 1,
+	},
+};
+
+static struct regulator_init_data vddlcd __initdata = {
+	.constraints = {
+		.name = "VDDLCD",
+		.always_on = 1,
+	},
+};
+
+static struct regulator_init_data vddalive __initdata = {
+	.constraints = {
+		.name = "VDDALIVE",
+		.always_on = 1,
+	},
+};
+
+static struct wm831x_status_pdata banff_red_led __initdata = {
+	.name = "banff:red:",
+	.default_src = WM831X_STATUS_MANUAL,
+};
+
+static struct wm831x_status_pdata banff_green_led __initdata = {
+	.name = "banff:green:",
+	.default_src = WM831X_STATUS_MANUAL,
+};
+
+static struct wm831x_touch_pdata touch_pdata __initdata = {
+	.data_irq = S3C_EINT(26),
+};
+
+static __init int crag_pmic_pre_init(struct wm831x *wm831x)
+{
+	/* Touchscreen data IRQ - CMOS, DBVDD, active high*/
+	wm831x_reg_write(wm831x, WM831X_GPIO11_CONTROL,
+			 WM831X_GPN_POL | WM831X_GPN_ENA | 0x6);
+
+	/* Touchscreen pen down IRQ - CMOS, DBVDD, active high*/
+	wm831x_reg_write(wm831x, WM831X_GPIO12_CONTROL,
+			 WM831X_GPN_POL | WM831X_GPN_ENA | 0x7);
+
+	return 0;
+}
+
+static struct wm831x_pdata crag_pmic_pdata __initdata = {
+	.pre_init = crag_pmic_pre_init,
+
+	.irq_base = BANFF_PMIC_IRQ_BASE,
+	.gpio_base = GPIO_BOARD_START + 8,
+
+	.dcdc = {
+		&vddarm,  /* DCDC1 */
+		&vddint,  /* DCDC2 */
+		&vddmem,  /* DCDC3 */
+	},
+
+	.ldo = {
+		&vddsys,   /* LDO1 */
+		&vddmmc,   /* LDO2 */
+		NULL,      /* LDO3 */
+		&vddotgi,  /* LDO4 */
+		&vddotg,   /* LDO5 */
+		&vddhi,    /* LDO6 */
+		&vddadc,   /* LDO7 */
+		&vddmem0,  /* LDO8 */
+		&vddpll,   /* LDO9 */
+		&vddlcd,   /* LDO10 */
+		&vddalive, /* LDO11 */
+	},
+
+	.status = {
+		&banff_green_led,
+		&banff_red_led,
+	},
+
+	.touch = &touch_pdata,
+};
+
+static struct i2c_board_info i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },
+	{ I2C_BOARD_INFO("tca6408", 0x20),
+	  .platform_data = &crag6410_pca_data,
+	},
+	{ I2C_BOARD_INFO("wm8312", 0x34),
+	  .platform_data = &crag_pmic_pdata,
+	  .irq = S3C_EINT(23),
+	},
+};
+
+static struct s3c2410_platform_i2c i2c0_pdata = {
+	.frequency = 400000,
+};
+
+static struct i2c_board_info i2c_devs1[] __initdata = {
+	{ I2C_BOARD_INFO("wm8311", 0x34),
+	  .platform_data = &glenfarclas_pmic_pdata,
+	},
+};
+
+static void __init crag6410_map_io(void)
+{
+	s3c64xx_init_io(NULL, 0);
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
+
+	/* LCD type and Bypass set by bootloader */
+}
+
+static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_PERMANENT,
+};
+
+static struct s3c_sdhci_platdata crag6410_hsmmc1_pdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= S3C64XX_GPF(11),
+};
+
+static void crag6410_cfg_sdhci0(struct platform_device *dev, int width)
+{
+	/* Set all the necessary GPG pins to special-function 2 */
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2));
+
+	/* force card-detected for prototype 0 */
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_DOWN);
+}
+
+static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.cfg_gpio		= crag6410_cfg_sdhci0,
+};
+
+static void __init crag6410_machine_init(void)
+{
+	/* Open drain IRQs need pullups */
+	s3c_gpio_setpull(S3C64XX_GPM(0), S3C_GPIO_PULL_UP);
+	s3c_gpio_setpull(S3C64XX_GPN(0), S3C_GPIO_PULL_UP);
+
+	gpio_request(S3C64XX_GPB(0), "LCD power");
+	gpio_direction_output(S3C64XX_GPB(0), 0);
+
+	gpio_request(S3C64XX_GPF(14), "LCD PWM");
+	gpio_direction_output(S3C64XX_GPF(14), 0);  /* turn off */
+
+	gpio_request(S3C64XX_GPB(1), "SD power");
+	gpio_direction_output(S3C64XX_GPB(1), 0);
+
+	gpio_request(S3C64XX_GPF(10), "nRESETSEL");
+	gpio_direction_output(S3C64XX_GPF(10), 1);
+
+	s3c_sdhci0_set_platdata(&crag6410_hsmmc0_pdata);
+	s3c_sdhci1_set_platdata(&crag6410_hsmmc1_pdata);
+	s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata);
+
+	s3c_i2c0_set_platdata(&i2c0_pdata);
+	s3c_i2c1_set_platdata(NULL);
+	s3c_fb_set_platdata(&crag6410_lcd_pdata);
+
+	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+	samsung_keypad_set_platdata(&crag6410_keypad_data);
+
+	platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
+
+	s3c_pm_init();
+}
+
+MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
+	/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= crag6410_map_io,
+	.init_machine	= crag6410_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
-- 
cgit v1.2.3


From ae24c263271ea450df8af331c0ec34ff3086c962 Mon Sep 17 00:00:00 2001
From: Mark Brown
Date: Wed, 22 Jun 2011 13:08:13 +0900
Subject: ARM: S3C64XX: Refresh Cragganmore support

The original Cragganmore code was submitted while new code was being
refused for mainline. This patch was unexpectedly merged upstream but
development had continued in the expectation that the code would be
resubmitted later so no split patches were maintained. This patch
synchronises that work with the recently merged driver.

The main changes are fleshing out of the PMIC and audio integration for
the system, including addition of the Dallas Dhu and Tobermory audio
modules, plus some minor updates to account for revision 2 hardware.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/mach-crag6410.c | 264 ++++++++++++++++++++++++++++------
 1 file changed, 223 insertions(+), 41 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 970775363701..cfe19f0f4cb5 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -21,6 +21,7 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 #include <linux/pwm_backlight.h>
 #include <linux/dm9000.h>
 #include <linux/gpio_keys.h>
@@ -33,6 +34,7 @@
 
 #include <linux/mfd/wm831x/core.h>
 #include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/irq.h>
 #include <linux/mfd/wm831x/gpio.h>
 
 #include <asm/mach/arch.h>
@@ -46,7 +48,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-modem.h>
 
-#include <mach/gpio-bank-o.h>
 #include <mach/regs-gpio-memport.h>
 
 #include <plat/regs-serial.h>
@@ -64,10 +65,16 @@
 #include <plat/iic.h>
 #include <plat/pm.h>
 
-#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START
+#include <sound/wm8915.h>
+#include <sound/wm8962.h>
+#include <sound/wm9081.h>
 
-#define PCA935X_GPIO_BASE GPIO_BOARD_START
-#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
+#define BANFF_PMIC_IRQ_BASE		IRQ_BOARD_START
+#define GLENFARCLAS_PMIC_IRQ_BASE	(IRQ_BOARD_START + 64)
+
+#define PCA935X_GPIO_BASE		GPIO_BOARD_START
+#define CODEC_GPIO_BASE		(GPIO_BOARD_START + 8)
+#define GLENFARCLAS_PMIC_GPIO_BASE	(GPIO_BOARD_START + 16)
 
 /* serial port setup */
 
@@ -77,32 +84,32 @@
 
 static struct s3c2410_uartcfg crag6410_uartcfgs[] __initdata = {
 	[0] = {
-		.hwport	= 0,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
 	},
 	[1] = {
-		.hwport	= 1,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
 	},
 	[2] = {
-		.hwport	= 2,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
 	},
 	[3] = {
-		.hwport	= 3,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
 	},
 };
 
@@ -205,10 +212,15 @@ static struct gpio_keys_button crag6410_gpio_keys[] = {
 	[0] = {
 		.code	= KEY_SUSPEND,
 		.gpio	= S3C64XX_GPL(10),	/* EINT 18 */
-		.type	= EV_SW,
+		.type	= EV_KEY,
 		.wakeup	= 1,
 		.active_low = 1,
 	},
+	[1] = {
+		.code	= SW_FRONT_PROXIMITY,
+		.gpio	= S3C64XX_GPN(11),	/* EINT 11 */
+		.type	= EV_SW,
+	},
 };
 
 static struct gpio_keys_platform_data crag6410_gpio_keydata = {
@@ -270,6 +282,44 @@ static struct platform_device crag6410_mmgpio = {
 	},
 };
 
+static struct platform_device speyside_device = {
+	.name		= "speyside",
+	.id		= -1,
+};
+
+static struct platform_device speyside_wm8962_device = {
+	.name		= "speyside-wm8962",
+	.id		= -1,
+};
+
+static struct regulator_consumer_supply wallvdd_consumers[] = {
+	REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
+	REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
+};
+
+static struct regulator_init_data wallvdd_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(wallvdd_consumers),
+	.consumer_supplies = wallvdd_consumers,
+};
+
+static struct fixed_voltage_config wallvdd_pdata = {
+	.supply_name = "WALLVDD",
+	.microvolts = 5000000,
+	.init_data = &wallvdd_data,
+	.gpio = -EINVAL,
+};
+
+static struct platform_device wallvdd_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= -1,
+	.dev = {
+		.platform_data = &wallvdd_pdata,
+	},
+};
+
 static struct platform_device *crag6410_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
@@ -293,6 +343,9 @@ static struct platform_device *crag6410_devices[] __initdata = {
 	&crag6410_mmgpio,
 	&crag6410_lcd_powerdev,
 	&crag6410_backlight_device,
+	&speyside_device,
+	&speyside_wm8962_device,
+	&wallvdd_device,
 };
 
 static struct pca953x_platform_data crag6410_pca_data = {
@@ -423,27 +476,21 @@ static struct wm831x_status_pdata banff_green_led __initdata = {
 
 static struct wm831x_touch_pdata touch_pdata __initdata = {
 	.data_irq = S3C_EINT(26),
+	.pd_irq = S3C_EINT(27),
 };
 
-static __init int crag_pmic_pre_init(struct wm831x *wm831x)
-{
-	/* Touchscreen data IRQ - CMOS, DBVDD, active high*/
-	wm831x_reg_write(wm831x, WM831X_GPIO11_CONTROL,
-			 WM831X_GPN_POL | WM831X_GPN_ENA | 0x6);
-
-	/* Touchscreen pen down IRQ - CMOS, DBVDD, active high*/
-	wm831x_reg_write(wm831x, WM831X_GPIO12_CONTROL,
-			 WM831X_GPN_POL | WM831X_GPN_ENA | 0x7);
-
-	return 0;
-}
-
 static struct wm831x_pdata crag_pmic_pdata __initdata = {
-	.pre_init = crag_pmic_pre_init,
-
+	.wm831x_num = 1,
 	.irq_base = BANFF_PMIC_IRQ_BASE,
 	.gpio_base = GPIO_BOARD_START + 8,
 
+	.gpio_defaults = {
+		/* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
+		[10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
+		/* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/
+		[11] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x7,
+	},
+
 	.dcdc = {
 		&vddarm,  /* DCDC1 */
 		&vddint,  /* DCDC2 */
@@ -487,9 +534,142 @@ static struct s3c2410_platform_i2c i2c0_pdata = {
 	.frequency = 400000,
 };
 
+static struct regulator_init_data pvdd_1v2 __initdata = {
+	.constraints = {
+		.name = "PVDD_1V2",
+		.always_on = 1,
+	},
+};
+
+static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
+	REGULATOR_SUPPLY("PLLVDD", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD", "1-001a"),
+	REGULATOR_SUPPLY("CPVDD", "1-001a"),
+	REGULATOR_SUPPLY("AVDD2", "1-001a"),
+	REGULATOR_SUPPLY("DCVDD", "1-001a"),
+	REGULATOR_SUPPLY("AVDD", "1-001a"),
+};
+
+static struct regulator_init_data pvdd_1v8 __initdata = {
+	.constraints = {
+		.name = "PVDD_1V8",
+		.always_on = 1,
+	},
+
+	.consumer_supplies = pvdd_1v8_consumers,
+	.num_consumer_supplies = ARRAY_SIZE(pvdd_1v8_consumers),
+};
+
+static struct regulator_consumer_supply pvdd_3v3_consumers[] __initdata = {
+	REGULATOR_SUPPLY("MICVDD", "1-001a"),
+	REGULATOR_SUPPLY("AVDD1", "1-001a"),
+};
+
+static struct regulator_init_data pvdd_3v3 __initdata = {
+	.constraints = {
+		.name = "PVDD_3V3",
+		.always_on = 1,
+	},
+
+	.consumer_supplies = pvdd_3v3_consumers,
+	.num_consumer_supplies = ARRAY_SIZE(pvdd_3v3_consumers),
+};
+
+static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = {
+	.wm831x_num = 2,
+	.irq_base = GLENFARCLAS_PMIC_IRQ_BASE,
+	.gpio_base = GLENFARCLAS_PMIC_GPIO_BASE,
+
+	.gpio_defaults = {
+		/* GPIO1-3: IRQ inputs, rising edge triggered, CMOS */
+		[0] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
+		[1] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
+		[2] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
+	},
+
+	.dcdc = {
+		&pvdd_1v2,  /* DCDC1 */
+		&pvdd_1v8,  /* DCDC2 */
+		&pvdd_3v3,  /* DCDC3 */
+	},
+
+	.disable_touch = true,
+};
+
+static struct wm8915_retune_mobile_config wm8915_retune[] = {
+	{
+		.name = "Sub LPF",
+		.rate = 48000,
+		.regs = {
+			0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+		},
+	},
+	{
+		.name = "Sub HPF",
+		.rate = 48000,
+		.regs = {
+			0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+		},
+	},
+};
+
+static struct wm8915_pdata wm8915_pdata __initdata = {
+	.ldo_ena = S3C64XX_GPN(7),
+	.gpio_base = CODEC_GPIO_BASE,
+	.micdet_def = 1,
+	.inl_mode = WM8915_DIFFERRENTIAL_1,
+	.inr_mode = WM8915_DIFFERRENTIAL_1,
+
+	.irq_flags = IRQF_TRIGGER_FALLING,
+
+	.gpio_default = {
+		0x8001, /* GPIO1 == ADCLRCLK1 */
+		0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
+		0x0141, /* GPIO3 == HP_SEL */
+		0x0002, /* GPIO4 == IRQ */
+		0x020e, /* GPIO5 == CLKOUT */
+	},
+
+	.retune_mobile_cfgs = wm8915_retune,
+	.num_retune_mobile_cfgs = ARRAY_SIZE(wm8915_retune),
+};
+
+static struct wm8962_pdata wm8962_pdata __initdata = {
+	.gpio_init = {
+		0,
+		WM8962_GPIO_FN_OPCLK,
+		WM8962_GPIO_FN_DMICCLK,
+		0,
+		0x8000 | WM8962_GPIO_FN_DMICDAT,
+		WM8962_GPIO_FN_IRQ,    /* Open drain mode */
+	},
+	.irq_active_low = true,
+};
+
+static struct wm9081_pdata wm9081_pdata __initdata = {
+	.irq_high = false,
+	.irq_cmos = false,
+};
+
 static struct i2c_board_info i2c_devs1[] __initdata = {
 	{ I2C_BOARD_INFO("wm8311", 0x34),
-	  .platform_data = &glenfarclas_pmic_pdata,
+	  .irq = S3C_EINT(0),
+	  .platform_data = &glenfarclas_pmic_pdata },
+
+	{ I2C_BOARD_INFO("wm1250-ev1", 0x27) },
+	{ I2C_BOARD_INFO("wm8915", 0x1a),
+	  .platform_data = &wm8915_pdata,
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+	{ I2C_BOARD_INFO("wm9081", 0x6c),
+	  .platform_data = &wm9081_pdata, },
+	{ I2C_BOARD_INFO("wm8962", 0x1a),
+	  .platform_data = &wm8962_pdata,
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
 	},
 };
 
@@ -561,6 +741,8 @@ static void __init crag6410_machine_init(void)
 
 	platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
 
+	regulator_has_full_constraints();
+
 	s3c_pm_init();
 }
 
-- 
cgit v1.2.3


From 3512729672e7f454f8dff2f3cdad7e3af190a9b6 Mon Sep 17 00:00:00 2001
From: Mark Brown
Date: Wed, 22 Jun 2011 13:08:17 +0900
Subject: ARM: S3C64XX: Configure supplies for all Cragganmore regulators

All the regulators on the system are supplied from the fixed wall supply.
While there's no functional value in telling the regulator core this it
does ensure that as a regulator maintainer I'll be exercising the supply
logic frequently.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/mach-crag6410.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index cfe19f0f4cb5..ea7228b7b641 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -367,6 +367,7 @@ static struct regulator_init_data vddarm __initdata = {
 	},
 	.num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
 	.consumer_supplies = vddarm_consumers,
+	.supply_regulator = "WALLVDD",
 };
 
 static struct regulator_init_data vddint __initdata = {
@@ -406,6 +407,7 @@ static struct regulator_init_data vddmmc __initdata = {
 	},
 	.num_consumer_supplies = ARRAY_SIZE(vddmmc_consumers),
 	.consumer_supplies = vddmmc_consumers,
+	.supply_regulator = "WALLVDD",
 };
 
 static struct regulator_init_data vddotgi __initdata = {
@@ -413,6 +415,7 @@ static struct regulator_init_data vddotgi __initdata = {
 		.name = "VDDOTGi",
 		.always_on = 1,
 	},
+	.supply_regulator = "WALLVDD",
 };
 
 static struct regulator_init_data vddotg __initdata = {
@@ -420,6 +423,7 @@ static struct regulator_init_data vddotg __initdata = {
 		.name = "VDDOTG",
 		.always_on = 1,
 	},
+	.supply_regulator = "WALLVDD",
 };
 
 static struct regulator_init_data vddhi __initdata = {
@@ -427,6 +431,7 @@ static struct regulator_init_data vddhi __initdata = {
 		.name = "VDDHI",
 		.always_on = 1,
 	},
+	.supply_regulator = "WALLVDD",
 };
 
 static struct regulator_init_data vddadc __initdata = {
@@ -434,6 +439,7 @@ static struct regulator_init_data vddadc __initdata = {
 		.name = "VDDADC,VDDDAC",
 		.always_on = 1,
 	},
+	.supply_regulator = "WALLVDD",
 };
 
 static struct regulator_init_data vddmem0 __initdata = {
@@ -441,6 +447,7 @@ static struct regulator_init_data vddmem0 __initdata = {
 		.name = "VDDMEM0",
 		.always_on = 1,
 	},
+	.supply_regulator = "WALLVDD",
 };
 
 static struct regulator_init_data vddpll __initdata = {
@@ -448,6 +455,7 @@ static struct regulator_init_data vddpll __initdata = {
 		.name = "VDDPLL",
 		.always_on = 1,
 	},
+	.supply_regulator = "WALLVDD",
 };
 
 static struct regulator_init_data vddlcd __initdata = {
@@ -455,6 +463,7 @@ static struct regulator_init_data vddlcd __initdata = {
 		.name = "VDDLCD",
 		.always_on = 1,
 	},
+	.supply_regulator = "WALLVDD",
 };
 
 static struct regulator_init_data vddalive __initdata = {
@@ -462,6 +471,7 @@ static struct regulator_init_data vddalive __initdata = {
 		.name = "VDDALIVE",
 		.always_on = 1,
 	},
+	.supply_regulator = "WALLVDD",
 };
 
 static struct wm831x_status_pdata banff_red_led __initdata = {
-- 
cgit v1.2.3


From 1a26d7344f2c304cc58e937fda1d03469de3d60a Mon Sep 17 00:00:00 2001
From: Mark Brown
Date: Wed, 22 Jun 2011 13:08:59 +0900
Subject: ARM: S3C64XX: Fix WM8915 IRQ polarity on Cragganmore

The chip IRQ output is genuinely an IRQ output rather than /IRQ output by
default - this had been working due to an interface issue with the IRQ
controller.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/mach-crag6410.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index ea7228b7b641..474f0d27e979 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -634,7 +634,7 @@ static struct wm8915_pdata wm8915_pdata __initdata = {
 	.inl_mode = WM8915_DIFFERRENTIAL_1,
 	.inr_mode = WM8915_DIFFERRENTIAL_1,
 
-	.irq_flags = IRQF_TRIGGER_FALLING,
+	.irq_flags = IRQF_TRIGGER_RISING,
 
 	.gpio_default = {
 		0x8001, /* GPIO1 == ADCLRCLK1 */
-- 
cgit v1.2.3


From 89e1c3d0fffa0d610fa7292bbfafb5e87dc6be34 Mon Sep 17 00:00:00 2001
From: Mark Brown
Date: Thu, 21 Jul 2011 01:26:24 +0900
Subject: ARM: S3C64XX: Configure backup battery charger on Cragganmore

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/mach-crag6410.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 474f0d27e979..9026249233ad 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -474,6 +474,12 @@ static struct regulator_init_data vddalive __initdata = {
 	.supply_regulator = "WALLVDD",
 };
 
+static struct wm831x_backup_pdata banff_backup_pdata __initdata = {
+	.charger_enable = 1,
+	.vlim = 2500,  /* mV */
+	.ilim = 200,   /* uA */
+};
+
 static struct wm831x_status_pdata banff_red_led __initdata = {
 	.name = "banff:red:",
 	.default_src = WM831X_STATUS_MANUAL,
@@ -494,6 +500,8 @@ static struct wm831x_pdata crag_pmic_pdata __initdata = {
 	.irq_base = BANFF_PMIC_IRQ_BASE,
 	.gpio_base = GPIO_BOARD_START + 8,
 
+	.backup = &banff_backup_pdata,
+
 	.gpio_defaults = {
 		/* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
 		[10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
-- 
cgit v1.2.3