From 7752572f18f98ee796e173334b088a1d621d2da4 Mon Sep 17 00:00:00 2001
From: Yanchuan Nian
Date: Wed, 4 Sep 2013 09:25:24 +0800
Subject: x86/irq: Correct comment about i8259 initialization

0x30-0x3f have been used for ISA interrupts on i386 as well
since 5 years ago, but old comments about i8259 initialization
were still referring to the old i386 usage of this port range.

Signed-off-by: Yanchuan Nian <ycnian@gmail.com>
Cc: yinghai@kernel.org
Cc: pavel@suse.cz
Link: http://lkml.kernel.org/r/1378257924-29446-1-git-send-email-ycnian@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/i8259.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
index 9a5c460404dc..2e977b5d61dd 100644
--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -312,8 +312,7 @@ static void init_8259A(int auto_eoi)
 	 */
 	outb_pic(0x11, PIC_MASTER_CMD);	/* ICW1: select 8259A-1 init */
 
-	/* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 on x86-64,
-	   to 0x20-0x27 on i386 */
+	/* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */
 	outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR);
 
 	/* 8259A-1 (the master) has a slave on IR2 */
-- 
cgit v1.2.3


From d02d0545f1fc62302fd9973a530b8029f1d9a9f1 Mon Sep 17 00:00:00 2001
From: Leif Lindholm
Date: Thu, 5 Sep 2013 11:34:53 +0100
Subject: ia64: add early_memremap() alias for early_ioremap()

early_ioremap() on IA64 chooses its mapping type based on the EFI
memory map. This patch adds an alias "early_memremap()" to be used
where the targeted location is memory rather than an i/o device.

Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/ia64/include/asm/io.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/io.h b/arch/ia64/include/asm/io.h
index 74a7cc3293bc..0d2bcb37ec35 100644
--- a/arch/ia64/include/asm/io.h
+++ b/arch/ia64/include/asm/io.h
@@ -424,6 +424,7 @@ extern void __iomem * ioremap(unsigned long offset, unsigned long size);
 extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size);
 extern void iounmap (volatile void __iomem *addr);
 extern void __iomem * early_ioremap (unsigned long phys_addr, unsigned long size);
+#define early_memremap(phys_addr, size)        early_ioremap(phys_addr, size)
 extern void early_iounmap (volatile void __iomem *addr, unsigned long size);
 static inline void __iomem * ioremap_cache (unsigned long phys_addr, unsigned long size)
 {
-- 
cgit v1.2.3


From 272686bf46a34f86d270cf192f68769667792026 Mon Sep 17 00:00:00 2001
From: Leif Lindholm
Date: Thu, 5 Sep 2013 11:34:54 +0100
Subject: efi: x86: ia64: provide a generic efi_config_init()

Common to (U)EFI support on all platforms is the global "efi" data
structure, and the code that parses the System Table to locate
addresses to populate that structure with.

This patch adds both of these to the global EFI driver code and
removes the local definition of the global "efi" data structure from
the x86 and ia64 code.

Squashed into one big patch to avoid breaking bisection.

Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/ia64/kernel/efi.c      |  54 +++++-----------------
 arch/x86/platform/efi/efi.c |  96 ++++-----------------------------------
 drivers/firmware/efi/efi.c  | 108 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/efi.h         |   7 +++
 4 files changed, 134 insertions(+), 131 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index 51bce594eb83..da5b462e6de6 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -44,10 +44,15 @@
 
 #define EFI_DEBUG	0
 
+static __initdata unsigned long palo_phys;
+
+static __initdata efi_config_table_type_t arch_tables[] = {
+	{PROCESSOR_ABSTRACTION_LAYER_OVERWRITE_GUID, "PALO", &palo_phys},
+	{NULL_GUID, NULL, 0},
+};
+
 extern efi_status_t efi_call_phys (void *, ...);
 
-struct efi efi;
-EXPORT_SYMBOL(efi);
 static efi_runtime_services_t *runtime;
 static u64 mem_limit = ~0UL, max_addr = ~0UL, min_addr = 0UL;
 
@@ -423,9 +428,9 @@ static u8 __init palo_checksum(u8 *buffer, u32 length)
  * Parse and handle PALO table which is published at:
  * http://www.dig64.org/home/DIG64_PALO_R1_0.pdf
  */
-static void __init handle_palo(unsigned long palo_phys)
+static void __init handle_palo(unsigned long phys_addr)
 {
-	struct palo_table *palo = __va(palo_phys);
+	struct palo_table *palo = __va(phys_addr);
 	u8  checksum;
 
 	if (strncmp(palo->signature, PALO_SIG, sizeof(PALO_SIG) - 1)) {
@@ -467,12 +472,10 @@ void __init
 efi_init (void)
 {
 	void *efi_map_start, *efi_map_end;
-	efi_config_table_t *config_tables;
 	efi_char16_t *c16;
 	u64 efi_desc_size;
 	char *cp, vendor[100] = "unknown";
 	int i;
-	unsigned long palo_phys;
 
 	/*
 	 * It's too early to be able to use the standard kernel command line
@@ -514,8 +517,6 @@ efi_init (void)
 		       efi.systab->hdr.revision >> 16,
 		       efi.systab->hdr.revision & 0xffff);
 
-	config_tables = __va(efi.systab->tables);
-
 	/* Show what we know for posterity */
 	c16 = __va(efi.systab->fw_vendor);
 	if (c16) {
@@ -528,43 +529,10 @@ efi_init (void)
 	       efi.systab->hdr.revision >> 16,
 	       efi.systab->hdr.revision & 0xffff, vendor);
 
-	efi.mps        = EFI_INVALID_TABLE_ADDR;
-	efi.acpi       = EFI_INVALID_TABLE_ADDR;
-	efi.acpi20     = EFI_INVALID_TABLE_ADDR;
-	efi.smbios     = EFI_INVALID_TABLE_ADDR;
-	efi.sal_systab = EFI_INVALID_TABLE_ADDR;
-	efi.boot_info  = EFI_INVALID_TABLE_ADDR;
-	efi.hcdp       = EFI_INVALID_TABLE_ADDR;
-	efi.uga        = EFI_INVALID_TABLE_ADDR;
-
 	palo_phys      = EFI_INVALID_TABLE_ADDR;
 
-	for (i = 0; i < (int) efi.systab->nr_tables; i++) {
-		if (efi_guidcmp(config_tables[i].guid, MPS_TABLE_GUID) == 0) {
-			efi.mps = config_tables[i].table;
-			printk(" MPS=0x%lx", config_tables[i].table);
-		} else if (efi_guidcmp(config_tables[i].guid, ACPI_20_TABLE_GUID) == 0) {
-			efi.acpi20 = config_tables[i].table;
-			printk(" ACPI 2.0=0x%lx", config_tables[i].table);
-		} else if (efi_guidcmp(config_tables[i].guid, ACPI_TABLE_GUID) == 0) {
-			efi.acpi = config_tables[i].table;
-			printk(" ACPI=0x%lx", config_tables[i].table);
-		} else if (efi_guidcmp(config_tables[i].guid, SMBIOS_TABLE_GUID) == 0) {
-			efi.smbios = config_tables[i].table;
-			printk(" SMBIOS=0x%lx", config_tables[i].table);
-		} else if (efi_guidcmp(config_tables[i].guid, SAL_SYSTEM_TABLE_GUID) == 0) {
-			efi.sal_systab = config_tables[i].table;
-			printk(" SALsystab=0x%lx", config_tables[i].table);
-		} else if (efi_guidcmp(config_tables[i].guid, HCDP_TABLE_GUID) == 0) {
-			efi.hcdp = config_tables[i].table;
-			printk(" HCDP=0x%lx", config_tables[i].table);
-		} else if (efi_guidcmp(config_tables[i].guid,
-			 PROCESSOR_ABSTRACTION_LAYER_OVERWRITE_GUID) == 0) {
-			palo_phys = config_tables[i].table;
-			printk(" PALO=0x%lx", config_tables[i].table);
-		}
-	}
-	printk("\n");
+	if (efi_config_init(arch_tables) != 0)
+		return;
 
 	if (palo_phys != EFI_INVALID_TABLE_ADDR)
 		handle_palo(palo_phys);
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index 90f6ed127096..ed2be58ea3f1 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -60,19 +60,6 @@
 
 static efi_char16_t efi_dummy_name[6] = { 'D', 'U', 'M', 'M', 'Y', 0 };
 
-struct efi __read_mostly efi = {
-	.mps        = EFI_INVALID_TABLE_ADDR,
-	.acpi       = EFI_INVALID_TABLE_ADDR,
-	.acpi20     = EFI_INVALID_TABLE_ADDR,
-	.smbios     = EFI_INVALID_TABLE_ADDR,
-	.sal_systab = EFI_INVALID_TABLE_ADDR,
-	.boot_info  = EFI_INVALID_TABLE_ADDR,
-	.hcdp       = EFI_INVALID_TABLE_ADDR,
-	.uga        = EFI_INVALID_TABLE_ADDR,
-	.uv_systab  = EFI_INVALID_TABLE_ADDR,
-};
-EXPORT_SYMBOL(efi);
-
 struct efi_memory_map memmap;
 
 static struct efi efi_phys __initdata;
@@ -80,6 +67,13 @@ static efi_system_table_t efi_systab __initdata;
 
 unsigned long x86_efi_facility;
 
+static __initdata efi_config_table_type_t arch_tables[] = {
+#ifdef CONFIG_X86_UV
+	{UV_SYSTEM_TABLE_GUID, "UVsystab", &efi.uv_systab},
+#endif
+	{NULL_GUID, NULL, 0},
+};
+
 /*
  * Returns 1 if 'facility' is enabled, 0 otherwise.
  */
@@ -578,80 +572,6 @@ static int __init efi_systab_init(void *phys)
 	return 0;
 }
 
-static int __init efi_config_init(u64 tables, int nr_tables)
-{
-	void *config_tables, *tablep;
-	int i, sz;
-
-	if (efi_enabled(EFI_64BIT))
-		sz = sizeof(efi_config_table_64_t);
-	else
-		sz = sizeof(efi_config_table_32_t);
-
-	/*
-	 * Let's see what config tables the firmware passed to us.
-	 */
-	config_tables = early_ioremap(tables, nr_tables * sz);
-	if (config_tables == NULL) {
-		pr_err("Could not map Configuration table!\n");
-		return -ENOMEM;
-	}
-
-	tablep = config_tables;
-	pr_info("");
-	for (i = 0; i < efi.systab->nr_tables; i++) {
-		efi_guid_t guid;
-		unsigned long table;
-
-		if (efi_enabled(EFI_64BIT)) {
-			u64 table64;
-			guid = ((efi_config_table_64_t *)tablep)->guid;
-			table64 = ((efi_config_table_64_t *)tablep)->table;
-			table = table64;
-#ifdef CONFIG_X86_32
-			if (table64 >> 32) {
-				pr_cont("\n");
-				pr_err("Table located above 4GB, disabling EFI.\n");
-				early_iounmap(config_tables,
-					      efi.systab->nr_tables * sz);
-				return -EINVAL;
-			}
-#endif
-		} else {
-			guid = ((efi_config_table_32_t *)tablep)->guid;
-			table = ((efi_config_table_32_t *)tablep)->table;
-		}
-		if (!efi_guidcmp(guid, MPS_TABLE_GUID)) {
-			efi.mps = table;
-			pr_cont(" MPS=0x%lx ", table);
-		} else if (!efi_guidcmp(guid, ACPI_20_TABLE_GUID)) {
-			efi.acpi20 = table;
-			pr_cont(" ACPI 2.0=0x%lx ", table);
-		} else if (!efi_guidcmp(guid, ACPI_TABLE_GUID)) {
-			efi.acpi = table;
-			pr_cont(" ACPI=0x%lx ", table);
-		} else if (!efi_guidcmp(guid, SMBIOS_TABLE_GUID)) {
-			efi.smbios = table;
-			pr_cont(" SMBIOS=0x%lx ", table);
-#ifdef CONFIG_X86_UV
-		} else if (!efi_guidcmp(guid, UV_SYSTEM_TABLE_GUID)) {
-			efi.uv_systab = table;
-			pr_cont(" UVsystab=0x%lx ", table);
-#endif
-		} else if (!efi_guidcmp(guid, HCDP_TABLE_GUID)) {
-			efi.hcdp = table;
-			pr_cont(" HCDP=0x%lx ", table);
-		} else if (!efi_guidcmp(guid, UGA_IO_PROTOCOL_GUID)) {
-			efi.uga = table;
-			pr_cont(" UGA=0x%lx ", table);
-		}
-		tablep += sz;
-	}
-	pr_cont("\n");
-	early_iounmap(config_tables, efi.systab->nr_tables * sz);
-	return 0;
-}
-
 static int __init efi_runtime_init(void)
 {
 	efi_runtime_services_t *runtime;
@@ -745,7 +665,7 @@ void __init efi_init(void)
 		efi.systab->hdr.revision >> 16,
 		efi.systab->hdr.revision & 0xffff, vendor);
 
-	if (efi_config_init(efi.systab->tables, efi.systab->nr_tables))
+	if (efi_config_init(arch_tables))
 		return;
 
 	set_bit(EFI_CONFIG_TABLES, &x86_efi_facility);
diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index 5145fa344ad5..e1010d450b65 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -13,11 +13,27 @@
  * This file is released under the GPLv2.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kobject.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/efi.h>
+#include <linux/io.h>
+
+struct efi __read_mostly efi = {
+	.mps        = EFI_INVALID_TABLE_ADDR,
+	.acpi       = EFI_INVALID_TABLE_ADDR,
+	.acpi20     = EFI_INVALID_TABLE_ADDR,
+	.smbios     = EFI_INVALID_TABLE_ADDR,
+	.sal_systab = EFI_INVALID_TABLE_ADDR,
+	.boot_info  = EFI_INVALID_TABLE_ADDR,
+	.hcdp       = EFI_INVALID_TABLE_ADDR,
+	.uga        = EFI_INVALID_TABLE_ADDR,
+	.uv_systab  = EFI_INVALID_TABLE_ADDR,
+};
+EXPORT_SYMBOL(efi);
 
 static struct kobject *efi_kobj;
 static struct kobject *efivars_kobj;
@@ -132,3 +148,95 @@ err_put:
 }
 
 subsys_initcall(efisubsys_init);
+
+
+static __initdata efi_config_table_type_t common_tables[] = {
+	{ACPI_20_TABLE_GUID, "ACPI 2.0", &efi.acpi20},
+	{ACPI_TABLE_GUID, "ACPI", &efi.acpi},
+	{HCDP_TABLE_GUID, "HCDP", &efi.hcdp},
+	{MPS_TABLE_GUID, "MPS", &efi.mps},
+	{SAL_SYSTEM_TABLE_GUID, "SALsystab", &efi.sal_systab},
+	{SMBIOS_TABLE_GUID, "SMBIOS", &efi.smbios},
+	{UGA_IO_PROTOCOL_GUID, "UGA", &efi.uga},
+	{NULL_GUID, NULL, 0},
+};
+
+static __init int match_config_table(efi_guid_t *guid,
+				     unsigned long table,
+				     efi_config_table_type_t *table_types)
+{
+	u8 str[EFI_VARIABLE_GUID_LEN + 1];
+	int i;
+
+	if (table_types) {
+		efi_guid_unparse(guid, str);
+
+		for (i = 0; efi_guidcmp(table_types[i].guid, NULL_GUID); i++) {
+			efi_guid_unparse(&table_types[i].guid, str);
+
+			if (!efi_guidcmp(*guid, table_types[i].guid)) {
+				*(table_types[i].ptr) = table;
+				pr_cont(" %s=0x%lx ",
+					table_types[i].name, table);
+				return 1;
+			}
+		}
+	}
+
+	return 0;
+}
+
+int __init efi_config_init(efi_config_table_type_t *arch_tables)
+{
+	void *config_tables, *tablep;
+	int i, sz;
+
+	if (efi_enabled(EFI_64BIT))
+		sz = sizeof(efi_config_table_64_t);
+	else
+		sz = sizeof(efi_config_table_32_t);
+
+	/*
+	 * Let's see what config tables the firmware passed to us.
+	 */
+	config_tables = early_memremap(efi.systab->tables,
+				       efi.systab->nr_tables * sz);
+	if (config_tables == NULL) {
+		pr_err("Could not map Configuration table!\n");
+		return -ENOMEM;
+	}
+
+	tablep = config_tables;
+	pr_info("");
+	for (i = 0; i < efi.systab->nr_tables; i++) {
+		efi_guid_t guid;
+		unsigned long table;
+
+		if (efi_enabled(EFI_64BIT)) {
+			u64 table64;
+			guid = ((efi_config_table_64_t *)tablep)->guid;
+			table64 = ((efi_config_table_64_t *)tablep)->table;
+			table = table64;
+#ifndef CONFIG_64BIT
+			if (table64 >> 32) {
+				pr_cont("\n");
+				pr_err("Table located above 4GB, disabling EFI.\n");
+				early_iounmap(config_tables,
+					       efi.systab->nr_tables * sz);
+				return -EINVAL;
+			}
+#endif
+		} else {
+			guid = ((efi_config_table_32_t *)tablep)->guid;
+			table = ((efi_config_table_32_t *)tablep)->table;
+		}
+
+		if (!match_config_table(&guid, table, common_tables))
+			match_config_table(&guid, table, arch_tables);
+
+		tablep += sz;
+	}
+	pr_cont("\n");
+	early_iounmap(config_tables, efi.systab->nr_tables * sz);
+	return 0;
+}
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 5f8f176154f7..09d9e4212799 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -404,6 +404,12 @@ typedef struct {
 	unsigned long table;
 } efi_config_table_t;
 
+typedef struct {
+	efi_guid_t guid;
+	const char *name;
+	unsigned long *ptr;
+} efi_config_table_type_t;
+
 #define EFI_SYSTEM_TABLE_SIGNATURE ((u64)0x5453595320494249ULL)
 
 #define EFI_2_30_SYSTEM_TABLE_REVISION  ((2 << 16) | (30))
@@ -587,6 +593,7 @@ static inline efi_status_t efi_query_variable_store(u32 attributes, unsigned lon
 }
 #endif
 extern void __iomem *efi_lookup_mapped_addr(u64 phys_addr);
+extern int efi_config_init(efi_config_table_type_t *arch_tables);
 extern u64 efi_get_iobase (void);
 extern u32 efi_mem_type (unsigned long phys_addr);
 extern u64 efi_mem_attributes (unsigned long phys_addr);
-- 
cgit v1.2.3


From 258f6fd738221766b512cd8c7120563b78d62829 Mon Sep 17 00:00:00 2001
From: Leif Lindholm
Date: Thu, 5 Sep 2013 11:34:55 +0100
Subject: efi: x86: make efi_lookup_mapped_addr() a common function

efi_lookup_mapped_addr() is a handy utility for other platforms than
x86. Move it from arch/x86 to drivers/firmware. Add memmap pointer
to global efi structure, and initialise it on x86.

Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/x86/platform/efi/efi.c | 30 ++----------------------------
 drivers/firmware/efi/efi.c  | 32 ++++++++++++++++++++++++++++++++
 include/linux/efi.h         |  1 +
 3 files changed, 35 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index ed2be58ea3f1..fbc1d70188f8 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -393,6 +393,8 @@ int __init efi_memblock_x86_reserve_range(void)
 
 	memblock_reserve(pmap, memmap.nr_map * memmap.desc_size);
 
+	efi.memmap = &memmap;
+
 	return 0;
 }
 
@@ -736,34 +738,6 @@ static void __init runtime_code_page_mkexec(void)
 	}
 }
 
-/*
- * We can't ioremap data in EFI boot services RAM, because we've already mapped
- * it as RAM.  So, look it up in the existing EFI memory map instead.  Only
- * callable after efi_enter_virtual_mode and before efi_free_boot_services.
- */
-void __iomem *efi_lookup_mapped_addr(u64 phys_addr)
-{
-	void *p;
-	if (WARN_ON(!memmap.map))
-		return NULL;
-	for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
-		efi_memory_desc_t *md = p;
-		u64 size = md->num_pages << EFI_PAGE_SHIFT;
-		u64 end = md->phys_addr + size;
-		if (!(md->attribute & EFI_MEMORY_RUNTIME) &&
-		    md->type != EFI_BOOT_SERVICES_CODE &&
-		    md->type != EFI_BOOT_SERVICES_DATA)
-			continue;
-		if (!md->virt_addr)
-			continue;
-		if (phys_addr >= md->phys_addr && phys_addr < end) {
-			phys_addr += md->virt_addr - md->phys_addr;
-			return (__force void __iomem *)(unsigned long)phys_addr;
-		}
-	}
-	return NULL;
-}
-
 void efi_memory_uc(u64 addr, unsigned long size)
 {
 	unsigned long page_shift = 1UL << EFI_PAGE_SHIFT;
diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index e1010d450b65..2e2fbdec0845 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -150,6 +150,38 @@ err_put:
 subsys_initcall(efisubsys_init);
 
 
+/*
+ * We can't ioremap data in EFI boot services RAM, because we've already mapped
+ * it as RAM.  So, look it up in the existing EFI memory map instead.  Only
+ * callable after efi_enter_virtual_mode and before efi_free_boot_services.
+ */
+void __iomem *efi_lookup_mapped_addr(u64 phys_addr)
+{
+	struct efi_memory_map *map;
+	void *p;
+	map = efi.memmap;
+	if (!map)
+		return NULL;
+	if (WARN_ON(!map->map))
+		return NULL;
+	for (p = map->map; p < map->map_end; p += map->desc_size) {
+		efi_memory_desc_t *md = p;
+		u64 size = md->num_pages << EFI_PAGE_SHIFT;
+		u64 end = md->phys_addr + size;
+		if (!(md->attribute & EFI_MEMORY_RUNTIME) &&
+		    md->type != EFI_BOOT_SERVICES_CODE &&
+		    md->type != EFI_BOOT_SERVICES_DATA)
+			continue;
+		if (!md->virt_addr)
+			continue;
+		if (phys_addr >= md->phys_addr && phys_addr < end) {
+			phys_addr += md->virt_addr - md->phys_addr;
+			return (__force void __iomem *)(unsigned long)phys_addr;
+		}
+	}
+	return NULL;
+}
+
 static __initdata efi_config_table_type_t common_tables[] = {
 	{ACPI_20_TABLE_GUID, "ACPI 2.0", &efi.acpi20},
 	{ACPI_TABLE_GUID, "ACPI", &efi.acpi},
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 09d9e4212799..c084b6d942c3 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -558,6 +558,7 @@ extern struct efi {
 	efi_get_next_high_mono_count_t *get_next_high_mono_count;
 	efi_reset_system_t *reset_system;
 	efi_set_virtual_address_map_t *set_virtual_address_map;
+	struct efi_memory_map *memmap;
 } efi;
 
 static inline int
-- 
cgit v1.2.3


From 6979287a7df66a92d6f308338e972a406f9ef842 Mon Sep 17 00:00:00 2001
From: Yinghai Lu
Date: Fri, 6 Sep 2013 19:07:09 -0700
Subject: x86/mm: Add 'step_size' comments to init_mem_mapping()

Current code uses macro to shift by 5, but there is no explanation
why there's no worry about an overflow there.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Jacob Shin <jacob.shin@amd.com>
Link: http://lkml.kernel.org/r/1378519629-10433-1-git-send-email-yinghai@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/mm/init.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 04664cdb7fda..ce32017c5e38 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -399,8 +399,25 @@ static unsigned long __init init_range_memory_mapping(
 	return mapped_ram_size;
 }
 
-/* (PUD_SHIFT-PMD_SHIFT)/2 */
-#define STEP_SIZE_SHIFT 5
+static unsigned long __init get_new_step_size(unsigned long step_size)
+{
+	/*
+	 * Explain why we shift by 5 and why we don't have to worry about
+	 * 'step_size << 5' overflowing:
+	 *
+	 * initial mapped size is PMD_SIZE (2M).
+	 * We can not set step_size to be PUD_SIZE (1G) yet.
+	 * In worse case, when we cross the 1G boundary, and
+	 * PG_LEVEL_2M is not set, we will need 1+1+512 pages (2M + 8k)
+	 * to map 1G range with PTE. Use 5 as shift for now.
+	 *
+	 * Don't need to worry about overflow, on 32bit, when step_size
+	 * is 0, round_down() returns 0 for start, and that turns it
+	 * into 0x100000000ULL.
+	 */
+	return step_size << 5;
+}
+
 void __init init_mem_mapping(void)
 {
 	unsigned long end, real_end, start, last_start;
@@ -449,7 +466,7 @@ void __init init_mem_mapping(void)
 		min_pfn_mapped = last_start >> PAGE_SHIFT;
 		/* only increase step_size after big range get mapped */
 		if (new_mapped_ram_size > mapped_ram_size)
-			step_size <<= STEP_SIZE_SHIFT;
+			step_size = get_new_step_size(step_size);
 		mapped_ram_size += new_mapped_ram_size;
 	}
 
-- 
cgit v1.2.3


From ff47ab4ff3cddfa7bc1b25b990e24abe2ae474ff Mon Sep 17 00:00:00 2001
From: Andi Kleen
Date: Fri, 16 Aug 2013 14:17:19 -0700
Subject: x86: Add 1/2/4/8 byte optimization to 64bit
 __copy_{from,to}_user_inatomic

The 64bit __copy_{from,to}_user_inatomic always called
copy_from_user_generic, but skipped the special optimizations for 1/2/4/8
byte accesses.

This especially hurts the futex call, which accesses the 4 byte futex
user value with a complicated fast string operation in a function call,
instead of a single movl.

Use __copy_{from,to}_user for _inatomic instead to get the same
optimizations. The only problem was the might_fault() in those functions.
So move that to new wrapper and call __copy_{f,t}_user_nocheck()
from *_inatomic directly.

32bit already did this correctly by duplicating the code.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1376687844-19857-2-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/uaccess_64.h | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index 4f7923dd0007..64476bb2a146 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -77,11 +77,10 @@ int copy_to_user(void __user *dst, const void *src, unsigned size)
 }
 
 static __always_inline __must_check
-int __copy_from_user(void *dst, const void __user *src, unsigned size)
+int __copy_from_user_nocheck(void *dst, const void __user *src, unsigned size)
 {
 	int ret = 0;
 
-	might_fault();
 	if (!__builtin_constant_p(size))
 		return copy_user_generic(dst, (__force void *)src, size);
 	switch (size) {
@@ -121,11 +120,17 @@ int __copy_from_user(void *dst, const void __user *src, unsigned size)
 }
 
 static __always_inline __must_check
-int __copy_to_user(void __user *dst, const void *src, unsigned size)
+int __copy_from_user(void *dst, const void __user *src, unsigned size)
+{
+	might_fault();
+	return __copy_from_user_nocheck(dst, src, size);
+}
+
+static __always_inline __must_check
+int __copy_to_user_nocheck(void __user *dst, const void *src, unsigned size)
 {
 	int ret = 0;
 
-	might_fault();
 	if (!__builtin_constant_p(size))
 		return copy_user_generic((__force void *)dst, src, size);
 	switch (size) {
@@ -164,6 +169,13 @@ int __copy_to_user(void __user *dst, const void *src, unsigned size)
 	}
 }
 
+static __always_inline __must_check
+int __copy_to_user(void __user *dst, const void *src, unsigned size)
+{
+	might_fault();
+	return __copy_to_user_nocheck(dst, src, size);
+}
+
 static __always_inline __must_check
 int __copy_in_user(void __user *dst, const void __user *src, unsigned size)
 {
@@ -220,13 +232,13 @@ int __copy_in_user(void __user *dst, const void __user *src, unsigned size)
 static __must_check __always_inline int
 __copy_from_user_inatomic(void *dst, const void __user *src, unsigned size)
 {
-	return copy_user_generic(dst, (__force const void *)src, size);
+	return __copy_from_user_nocheck(dst, (__force const void *)src, size);
 }
 
 static __must_check __always_inline int
 __copy_to_user_inatomic(void __user *dst, const void *src, unsigned size)
 {
-	return copy_user_generic((__force void *)dst, src, size);
+	return __copy_to_user_nocheck((__force void *)dst, src, size);
 }
 
 extern long __copy_user_nocache(void *dst, const void __user *src,
-- 
cgit v1.2.3


From 2dbf0116aa8c7bfa900352d3f7b2609748fcc1c5 Mon Sep 17 00:00:00 2001
From: Andi Kleen
Date: Thu, 5 Sep 2013 20:37:38 -0700
Subject: perf/x86/intel: Avoid checkpointed counters causing excessive TSX
 aborts

With checkpointed counters there can be a situation where the counter
is overflowing, aborts the transaction, is set back to a non overflowing
checkpoint, causes interupt. The interrupt doesn't see the overflow
because it has been checkpointed.  This is then a spurious PMI, typically with
a ugly NMI message.  It can also lead to excessive aborts.

Avoid this problem by:

- Using the full counter width for counting counters (earlier patch)

- Forbid sampling for checkpointed counters. It's not too useful anyways,
  checkpointing is mainly for counting. The check is approximate
  (to still handle KVM), but should catch the majority of cases.

- On a PMI always set back checkpointed counters to zero.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1378438661-24765-2-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/cpu/perf_event_intel.c | 37 ++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 9db76c31b3c3..57d64b75f15c 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -1282,6 +1282,11 @@ static void intel_pmu_enable_event(struct perf_event *event)
 	__x86_pmu_enable_event(hwc, ARCH_PERFMON_EVENTSEL_ENABLE);
 }
 
+static inline bool event_is_checkpointed(struct perf_event *event)
+{
+	return (event->hw.config & HSW_IN_TX_CHECKPOINTED) != 0;
+}
+
 /*
  * Save and restart an expired event. Called by NMI contexts,
  * so it has to be careful about preempting normal event ops:
@@ -1289,6 +1294,17 @@ static void intel_pmu_enable_event(struct perf_event *event)
 int intel_pmu_save_and_restart(struct perf_event *event)
 {
 	x86_perf_event_update(event);
+	/*
+	 * For a checkpointed counter always reset back to 0.  This
+	 * avoids a situation where the counter overflows, aborts the
+	 * transaction and is then set back to shortly before the
+	 * overflow, and overflows and aborts again.
+	 */
+	if (unlikely(event_is_checkpointed(event))) {
+		/* No race with NMIs because the counter should not be armed */
+		wrmsrl(event->hw.event_base, 0);
+		local64_set(&event->hw.prev_count, 0);
+	}
 	return x86_perf_event_set_period(event);
 }
 
@@ -1372,6 +1388,13 @@ again:
 		x86_pmu.drain_pebs(regs);
 	}
 
+	/*
+	 * To avoid spurious interrupts with perf stat always reset checkpointed
+	 * counters.
+	 */
+	if (cpuc->events[2] && event_is_checkpointed(cpuc->events[2]))
+		status |= (1ULL << 2);
+
 	for_each_set_bit(bit, (unsigned long *)&status, X86_PMC_IDX_MAX) {
 		struct perf_event *event = cpuc->events[bit];
 
@@ -1837,6 +1860,20 @@ static int hsw_hw_config(struct perf_event *event)
 	      event->attr.precise_ip > 0))
 		return -EOPNOTSUPP;
 
+	if (event_is_checkpointed(event)) {
+		/*
+		 * Sampling of checkpointed events can cause situations where
+		 * the CPU constantly aborts because of a overflow, which is
+		 * then checkpointed back and ignored. Forbid checkpointing
+		 * for sampling.
+		 *
+		 * But still allow a long sampling period, so that perf stat
+		 * from KVM works.
+		 */
+		if (event->attr.sample_period > 0 &&
+		    event->attr.sample_period < 0x7fffffff)
+			return -EOPNOTSUPP;
+	}
 	return 0;
 }
 
-- 
cgit v1.2.3


From 748e86aa90edfddfa6016f1cf383ff5bc6aada91 Mon Sep 17 00:00:00 2001
From: Andi Kleen
Date: Thu, 5 Sep 2013 20:37:39 -0700
Subject: perf/x86: Report TSX transaction abort cost as weight

Use the existing weight reporting facility to report the transaction
abort cost, that is the number of cycles wasted in aborts.
Haswell reports this in the PEBS record.

This was in fact the original user for weight.

This is a very useful sort key to concentrate on the most
costly aborts and a good metric for TSX tuning.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1378438661-24765-3-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/cpu/perf_event_intel_ds.c | 55 +++++++++++++++++++++++--------
 1 file changed, 42 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index 63438aad177f..104cbba3b595 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -182,16 +182,29 @@ struct pebs_record_nhm {
  * Same as pebs_record_nhm, with two additional fields.
  */
 struct pebs_record_hsw {
-	struct pebs_record_nhm nhm;
-	/*
-	 * Real IP of the event. In the Intel documentation this
-	 * is called eventingrip.
-	 */
-	u64 real_ip;
-	/*
-	 * TSX tuning information field: abort cycles and abort flags.
-	 */
-	u64 tsx_tuning;
+	u64 flags, ip;
+	u64 ax, bx, cx, dx;
+	u64 si, di, bp, sp;
+	u64 r8,  r9,  r10, r11;
+	u64 r12, r13, r14, r15;
+	u64 status, dla, dse, lat;
+	u64 real_ip; /* the actual eventing ip */
+	u64 tsx_tuning; /* TSX abort cycles and flags */
+};
+
+union hsw_tsx_tuning {
+	struct {
+		u32 cycles_last_block     : 32,
+		    hle_abort		  : 1,
+		    rtm_abort		  : 1,
+		    instruction_abort     : 1,
+		    non_instruction_abort : 1,
+		    retry		  : 1,
+		    data_conflict	  : 1,
+		    capacity_writes	  : 1,
+		    capacity_reads	  : 1;
+	};
+	u64	    value;
 };
 
 void init_debug_store_on_cpu(int cpu)
@@ -785,16 +798,26 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs)
 	return 0;
 }
 
+static inline u64 intel_hsw_weight(struct pebs_record_hsw *pebs)
+{
+	if (pebs->tsx_tuning) {
+		union hsw_tsx_tuning tsx = { .value = pebs->tsx_tuning };
+		return tsx.cycles_last_block;
+	}
+	return 0;
+}
+
 static void __intel_pmu_pebs_event(struct perf_event *event,
 				   struct pt_regs *iregs, void *__pebs)
 {
 	/*
 	 * We cast to pebs_record_nhm to get the load latency data
 	 * if extra_reg MSR_PEBS_LD_LAT_THRESHOLD used
+	 * We cast to the biggest PEBS record are careful not
+	 * to access out-of-bounds members.
 	 */
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	struct pebs_record_nhm *pebs = __pebs;
-	struct pebs_record_hsw *pebs_hsw = __pebs;
+	struct pebs_record_hsw *pebs = __pebs;
 	struct perf_sample_data data;
 	struct pt_regs regs;
 	u64 sample_type;
@@ -853,7 +876,7 @@ static void __intel_pmu_pebs_event(struct perf_event *event,
 	regs.sp = pebs->sp;
 
 	if (event->attr.precise_ip > 1 && x86_pmu.intel_cap.pebs_format >= 2) {
-		regs.ip = pebs_hsw->real_ip;
+		regs.ip = pebs->real_ip;
 		regs.flags |= PERF_EFLAGS_EXACT;
 	} else if (event->attr.precise_ip > 1 && intel_pmu_pebs_fixup_ip(&regs))
 		regs.flags |= PERF_EFLAGS_EXACT;
@@ -864,6 +887,12 @@ static void __intel_pmu_pebs_event(struct perf_event *event,
 		x86_pmu.intel_cap.pebs_format >= 1)
 		data.addr = pebs->dla;
 
+	/* Only set the TSX weight when no memory weight was requested. */
+	if ((event->attr.sample_type & PERF_SAMPLE_WEIGHT) &&
+	    !fll &&
+	    (x86_pmu.intel_cap.pebs_format >= 2))
+		data.weight = intel_hsw_weight(pebs);
+
 	if (has_branch_stack(event))
 		data.br_stack = &cpuc->lbr_stack;
 
-- 
cgit v1.2.3


From 4b2c4f1f1b71fe18381f089c501ac21cd2167dfa Mon Sep 17 00:00:00 2001
From: Andi Kleen
Date: Thu, 5 Sep 2013 20:37:40 -0700
Subject: perf/x86/intel: Add Haswell TSX event aliases

Add TSX event aliases, and export them from the kernel to perf.

These are used by perf stat -T and to allow
more user friendly access to events. The events are designed to
be fairly generic and may also apply to other architectures
implementing HTM.  They all cover common situations that
happens during tuning of transactional code.

For Haswell we have to separate the HLE and RTM events,
as they are separate in the PMU.

This adds the following events:

 tx-start	Count start transaction (used by perf stat -T)
 tx-commit	Count commit of transaction
 tx-abort	Count all aborts
 tx-conflict	Count aborts due to conflict with another CPU.
 tx-capacity	Count capacity aborts (transaction too large)

Then matching el-* events for HLE

 cycles-t	Transactional cycles (used by perf stat -T)
  * also exists on POWER8

 cycles-ct	Transactional cycles commited (used by perf stat -T)
  * according to Michael Ellerman POWER8 has a cycles-transactional-committed,
  * perf stat -T handles both cases

Note for useful abort profiling often precise has to be set,
as Haswell can only report the point inside the transaction
with precise=2.

For some classes of aborts, like conflicts, this is not needed,
as it makes more sense to look at the complete critical section.

This gives a clean set of generalized events to examine transaction
success and aborts. Haswell has additional events for TSX, but those
are more specialized for very specific situations.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1378438661-24765-4-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/cpu/perf_event_intel.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 57d64b75f15c..dd1d4f3e18e6 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -2222,7 +2222,34 @@ static __init void intel_nehalem_quirk(void)
 EVENT_ATTR_STR(mem-loads,      mem_ld_hsw,     "event=0xcd,umask=0x1,ldlat=3");
 EVENT_ATTR_STR(mem-stores,     mem_st_hsw,     "event=0xd0,umask=0x82")
 
+/* Haswell special events */
+EVENT_ATTR_STR(tx-start,        tx_start,       "event=0xc9,umask=0x1");
+EVENT_ATTR_STR(tx-commit,       tx_commit,      "event=0xc9,umask=0x2");
+EVENT_ATTR_STR(tx-abort,        tx_abort,	"event=0xc9,umask=0x4");
+EVENT_ATTR_STR(tx-capacity,     tx_capacity,	"event=0x54,umask=0x2");
+EVENT_ATTR_STR(tx-conflict,     tx_conflict,	"event=0x54,umask=0x1");
+EVENT_ATTR_STR(el-start,        el_start,       "event=0xc8,umask=0x1");
+EVENT_ATTR_STR(el-commit,       el_commit,      "event=0xc8,umask=0x2");
+EVENT_ATTR_STR(el-abort,        el_abort,	"event=0xc8,umask=0x4");
+EVENT_ATTR_STR(el-capacity,     el_capacity,    "event=0x54,umask=0x2");
+EVENT_ATTR_STR(el-conflict,     el_conflict,    "event=0x54,umask=0x1");
+EVENT_ATTR_STR(cycles-t,        cycles_t,       "event=0x3c,in_tx=1");
+EVENT_ATTR_STR(cycles-ct,       cycles_ct,
+					"event=0x3c,in_tx=1,in_tx_cp=1");
+
 static struct attribute *hsw_events_attrs[] = {
+	EVENT_PTR(tx_start),
+	EVENT_PTR(tx_commit),
+	EVENT_PTR(tx_abort),
+	EVENT_PTR(tx_capacity),
+	EVENT_PTR(tx_conflict),
+	EVENT_PTR(el_start),
+	EVENT_PTR(el_commit),
+	EVENT_PTR(el_abort),
+	EVENT_PTR(el_capacity),
+	EVENT_PTR(el_conflict),
+	EVENT_PTR(cycles_t),
+	EVENT_PTR(cycles_ct),
 	EVENT_PTR(mem_ld_hsw),
 	EVENT_PTR(mem_st_hsw),
 	NULL
-- 
cgit v1.2.3


From 2b9e344df384e595db24ac61ae5f780e9b024878 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra
Date: Thu, 12 Sep 2013 12:53:44 +0200
Subject: perf/x86/intel: Clean up checkpoint-interrupt bits

Clean up the weird CP interrupt exception code by keeping a CP mask.

Andi suggested this implementation but weirdly didn't actually
implement it himself, do so now because it removes the conditional in
the interrupt handler and avoids the assumption its only on cnt2.

Suggested-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-dvb4q0rydkfp00kqat4p5bah@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/cpu/perf_event.h       |  5 +++++
 arch/x86/kernel/cpu/perf_event_intel.c | 22 +++++++++++++---------
 2 files changed, 18 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h
index cc16faae0538..ce84edeeae27 100644
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/kernel/cpu/perf_event.h
@@ -163,6 +163,11 @@ struct cpu_hw_events {
 	u64				intel_ctrl_host_mask;
 	struct perf_guest_switch_msr	guest_switch_msrs[X86_PMC_IDX_MAX];
 
+	/*
+	 * Intel checkpoint mask
+	 */
+	u64				intel_cp_status;
+
 	/*
 	 * manage shared (per-core, per-cpu) registers
 	 * used on Intel NHM/WSM/SNB
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index dd1d4f3e18e6..ec70d0cce555 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -1184,6 +1184,11 @@ static void intel_pmu_disable_fixed(struct hw_perf_event *hwc)
 	wrmsrl(hwc->config_base, ctrl_val);
 }
 
+static inline bool event_is_checkpointed(struct perf_event *event)
+{
+	return (event->hw.config & HSW_IN_TX_CHECKPOINTED) != 0;
+}
+
 static void intel_pmu_disable_event(struct perf_event *event)
 {
 	struct hw_perf_event *hwc = &event->hw;
@@ -1197,6 +1202,7 @@ static void intel_pmu_disable_event(struct perf_event *event)
 
 	cpuc->intel_ctrl_guest_mask &= ~(1ull << hwc->idx);
 	cpuc->intel_ctrl_host_mask &= ~(1ull << hwc->idx);
+	cpuc->intel_cp_status &= ~(1ull << hwc->idx);
 
 	/*
 	 * must disable before any actual event
@@ -1271,6 +1277,9 @@ static void intel_pmu_enable_event(struct perf_event *event)
 	if (event->attr.exclude_guest)
 		cpuc->intel_ctrl_host_mask |= (1ull << hwc->idx);
 
+	if (unlikely(event_is_checkpointed(event)))
+		cpuc->intel_cp_status |= (1ull << hwc->idx);
+
 	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
 		intel_pmu_enable_fixed(hwc);
 		return;
@@ -1282,11 +1291,6 @@ static void intel_pmu_enable_event(struct perf_event *event)
 	__x86_pmu_enable_event(hwc, ARCH_PERFMON_EVENTSEL_ENABLE);
 }
 
-static inline bool event_is_checkpointed(struct perf_event *event)
-{
-	return (event->hw.config & HSW_IN_TX_CHECKPOINTED) != 0;
-}
-
 /*
  * Save and restart an expired event. Called by NMI contexts,
  * so it has to be careful about preempting normal event ops:
@@ -1389,11 +1393,11 @@ again:
 	}
 
 	/*
-	 * To avoid spurious interrupts with perf stat always reset checkpointed
-	 * counters.
+	 * Checkpointed counters can lead to 'spurious' PMIs because the
+	 * rollback caused by the PMI will have cleared the overflow status
+	 * bit. Therefore always force probe these counters.
 	 */
-	if (cpuc->events[2] && event_is_checkpointed(cpuc->events[2]))
-		status |= (1ULL << 2);
+	status |= cpuc->intel_cp_status;
 
 	for_each_set_bit(bit, (unsigned long *)&status, X86_PMC_IDX_MAX) {
 		struct perf_event *event = cpuc->events[bit];
-- 
cgit v1.2.3


From d2beea4a3419e63804094e9ac4b6d1518bc17a9b Mon Sep 17 00:00:00 2001
From: Peter Zijlstra
Date: Thu, 12 Sep 2013 13:00:47 +0200
Subject: perf/x86/intel: Clean-up/reduce PEBS code

Get rid of some pointless duplication introduced by the Haswell code.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-8q6y4davda9aawwv5yxe7klp@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/cpu/perf_event_intel_ds.c | 94 +++++++++----------------------
 1 file changed, 26 insertions(+), 68 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index 104cbba3b595..f364c13ddaa6 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -188,8 +188,7 @@ struct pebs_record_hsw {
 	u64 r8,  r9,  r10, r11;
 	u64 r12, r13, r14, r15;
 	u64 status, dla, dse, lat;
-	u64 real_ip; /* the actual eventing ip */
-	u64 tsx_tuning; /* TSX abort cycles and flags */
+	u64 real_ip, tsx_tuning;
 };
 
 union hsw_tsx_tuning {
@@ -811,10 +810,8 @@ static void __intel_pmu_pebs_event(struct perf_event *event,
 				   struct pt_regs *iregs, void *__pebs)
 {
 	/*
-	 * We cast to pebs_record_nhm to get the load latency data
-	 * if extra_reg MSR_PEBS_LD_LAT_THRESHOLD used
-	 * We cast to the biggest PEBS record are careful not
-	 * to access out-of-bounds members.
+	 * We cast to the biggest pebs_record but are careful not to
+	 * unconditionally access the 'extra' entries.
 	 */
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 	struct pebs_record_hsw *pebs = __pebs;
@@ -884,12 +881,11 @@ static void __intel_pmu_pebs_event(struct perf_event *event,
 		regs.flags &= ~PERF_EFLAGS_EXACT;
 
 	if ((event->attr.sample_type & PERF_SAMPLE_ADDR) &&
-		x86_pmu.intel_cap.pebs_format >= 1)
+	    x86_pmu.intel_cap.pebs_format >= 1)
 		data.addr = pebs->dla;
 
 	/* Only set the TSX weight when no memory weight was requested. */
-	if ((event->attr.sample_type & PERF_SAMPLE_WEIGHT) &&
-	    !fll &&
+	if ((event->attr.sample_type & PERF_SAMPLE_WEIGHT) && !fll &&
 	    (x86_pmu.intel_cap.pebs_format >= 2))
 		data.weight = intel_hsw_weight(pebs);
 
@@ -941,17 +937,34 @@ static void intel_pmu_drain_pebs_core(struct pt_regs *iregs)
 	__intel_pmu_pebs_event(event, iregs, at);
 }
 
-static void __intel_pmu_drain_pebs_nhm(struct pt_regs *iregs, void *at,
-					void *top)
+static void intel_pmu_drain_pebs_nhm(struct pt_regs *iregs)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 	struct debug_store *ds = cpuc->ds;
 	struct perf_event *event = NULL;
+	void *at, *top;
 	u64 status = 0;
-	int bit;
+	int bit, n;
+
+	if (!x86_pmu.pebs_active)
+		return;
+
+	at  = (struct pebs_record_nhm *)(unsigned long)ds->pebs_buffer_base;
+	top = (struct pebs_record_nhm *)(unsigned long)ds->pebs_index;
 
 	ds->pebs_index = ds->pebs_buffer_base;
 
+	n = (top - at) / x86_pmu.pebs_record_size;
+	if (n <= 0)
+		return;
+
+	/*
+	 * Should not happen, we program the threshold at 1 and do not
+	 * set a reset value.
+	 */
+	WARN_ONCE(n > x86_pmu.max_pebs_events,
+		  "Unexpected number of pebs records %d\n", n);
+
 	for (; at < top; at += x86_pmu.pebs_record_size) {
 		struct pebs_record_nhm *p = at;
 
@@ -979,61 +992,6 @@ static void __intel_pmu_drain_pebs_nhm(struct pt_regs *iregs, void *at,
 	}
 }
 
-static void intel_pmu_drain_pebs_nhm(struct pt_regs *iregs)
-{
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	struct debug_store *ds = cpuc->ds;
-	struct pebs_record_nhm *at, *top;
-	int n;
-
-	if (!x86_pmu.pebs_active)
-		return;
-
-	at  = (struct pebs_record_nhm *)(unsigned long)ds->pebs_buffer_base;
-	top = (struct pebs_record_nhm *)(unsigned long)ds->pebs_index;
-
-	ds->pebs_index = ds->pebs_buffer_base;
-
-	n = top - at;
-	if (n <= 0)
-		return;
-
-	/*
-	 * Should not happen, we program the threshold at 1 and do not
-	 * set a reset value.
-	 */
-	WARN_ONCE(n > x86_pmu.max_pebs_events,
-		  "Unexpected number of pebs records %d\n", n);
-
-	return __intel_pmu_drain_pebs_nhm(iregs, at, top);
-}
-
-static void intel_pmu_drain_pebs_hsw(struct pt_regs *iregs)
-{
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	struct debug_store *ds = cpuc->ds;
-	struct pebs_record_hsw *at, *top;
-	int n;
-
-	if (!x86_pmu.pebs_active)
-		return;
-
-	at  = (struct pebs_record_hsw *)(unsigned long)ds->pebs_buffer_base;
-	top = (struct pebs_record_hsw *)(unsigned long)ds->pebs_index;
-
-	n = top - at;
-	if (n <= 0)
-		return;
-	/*
-	 * Should not happen, we program the threshold at 1 and do not
-	 * set a reset value.
-	 */
-	WARN_ONCE(n > x86_pmu.max_pebs_events,
-		  "Unexpected number of pebs records %d\n", n);
-
-	return __intel_pmu_drain_pebs_nhm(iregs, at, top);
-}
-
 /*
  * BTS, PEBS probe and setup
  */
@@ -1068,7 +1026,7 @@ void intel_ds_init(void)
 		case 2:
 			pr_cont("PEBS fmt2%c, ", pebs_type);
 			x86_pmu.pebs_record_size = sizeof(struct pebs_record_hsw);
-			x86_pmu.drain_pebs = intel_pmu_drain_pebs_hsw;
+			x86_pmu.drain_pebs = intel_pmu_drain_pebs_nhm;
 			break;
 
 		default:
-- 
cgit v1.2.3


From 7f2ee91f54fb56071f97bde1ef7ba7ba0d58dfe5 Mon Sep 17 00:00:00 2001
From: Ingo Molnar
Date: Thu, 12 Sep 2013 19:17:00 +0200
Subject: perf/x86/intel: Clean up EVENT_ATTR_STR() muck

Make the code a bit more readable by removing stray whitespaces et al.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/n/tip-lzEnychz1ylqy8zjenxOmeht@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/cpu/perf_event_intel.c | 35 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index ec70d0cce555..353b7a3a2581 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -190,9 +190,9 @@ static struct extra_reg intel_snbep_extra_regs[] __read_mostly = {
 	EVENT_EXTRA_END
 };
 
-EVENT_ATTR_STR(mem-loads, mem_ld_nhm, "event=0x0b,umask=0x10,ldlat=3");
-EVENT_ATTR_STR(mem-loads, mem_ld_snb, "event=0xcd,umask=0x1,ldlat=3");
-EVENT_ATTR_STR(mem-stores, mem_st_snb, "event=0xcd,umask=0x2");
+EVENT_ATTR_STR(mem-loads,	mem_ld_nhm,	"event=0x0b,umask=0x10,ldlat=3");
+EVENT_ATTR_STR(mem-loads,	mem_ld_snb,	"event=0xcd,umask=0x1,ldlat=3");
+EVENT_ATTR_STR(mem-stores,	mem_st_snb,	"event=0xcd,umask=0x2");
 
 struct attribute *nhm_events_attrs[] = {
 	EVENT_PTR(mem_ld_nhm),
@@ -2223,23 +2223,22 @@ static __init void intel_nehalem_quirk(void)
 	}
 }
 
-EVENT_ATTR_STR(mem-loads,      mem_ld_hsw,     "event=0xcd,umask=0x1,ldlat=3");
-EVENT_ATTR_STR(mem-stores,     mem_st_hsw,     "event=0xd0,umask=0x82")
+EVENT_ATTR_STR(mem-loads,	mem_ld_hsw,	"event=0xcd,umask=0x1,ldlat=3");
+EVENT_ATTR_STR(mem-stores,	mem_st_hsw,	"event=0xd0,umask=0x82")
 
 /* Haswell special events */
-EVENT_ATTR_STR(tx-start,        tx_start,       "event=0xc9,umask=0x1");
-EVENT_ATTR_STR(tx-commit,       tx_commit,      "event=0xc9,umask=0x2");
-EVENT_ATTR_STR(tx-abort,        tx_abort,	"event=0xc9,umask=0x4");
-EVENT_ATTR_STR(tx-capacity,     tx_capacity,	"event=0x54,umask=0x2");
-EVENT_ATTR_STR(tx-conflict,     tx_conflict,	"event=0x54,umask=0x1");
-EVENT_ATTR_STR(el-start,        el_start,       "event=0xc8,umask=0x1");
-EVENT_ATTR_STR(el-commit,       el_commit,      "event=0xc8,umask=0x2");
-EVENT_ATTR_STR(el-abort,        el_abort,	"event=0xc8,umask=0x4");
-EVENT_ATTR_STR(el-capacity,     el_capacity,    "event=0x54,umask=0x2");
-EVENT_ATTR_STR(el-conflict,     el_conflict,    "event=0x54,umask=0x1");
-EVENT_ATTR_STR(cycles-t,        cycles_t,       "event=0x3c,in_tx=1");
-EVENT_ATTR_STR(cycles-ct,       cycles_ct,
-					"event=0x3c,in_tx=1,in_tx_cp=1");
+EVENT_ATTR_STR(tx-start,	tx_start,	"event=0xc9,umask=0x1");
+EVENT_ATTR_STR(tx-commit,	tx_commit,	"event=0xc9,umask=0x2");
+EVENT_ATTR_STR(tx-abort,	tx_abort,	"event=0xc9,umask=0x4");
+EVENT_ATTR_STR(tx-capacity,	tx_capacity,	"event=0x54,umask=0x2");
+EVENT_ATTR_STR(tx-conflict,	tx_conflict,	"event=0x54,umask=0x1");
+EVENT_ATTR_STR(el-start,	el_start,	"event=0xc8,umask=0x1");
+EVENT_ATTR_STR(el-commit,	el_commit,	"event=0xc8,umask=0x2");
+EVENT_ATTR_STR(el-abort,	el_abort,	"event=0xc8,umask=0x4");
+EVENT_ATTR_STR(el-capacity,	el_capacity,	"event=0x54,umask=0x2");
+EVENT_ATTR_STR(el-conflict,	el_conflict,	"event=0x54,umask=0x1");
+EVENT_ATTR_STR(cycles-t,	cycles_t,	"event=0x3c,in_tx=1");
+EVENT_ATTR_STR(cycles-ct,	cycles_ct,	"event=0x3c,in_tx=1,in_tx_cp=1");
 
 static struct attribute *hsw_events_attrs[] = {
 	EVENT_PTR(tx_start),
-- 
cgit v1.2.3


From 4b08478422040ae8cb11acc15d51f1cdb0ac39c8 Mon Sep 17 00:00:00 2001
From: Guenter Roeck
Date: Fri, 30 Aug 2013 06:01:49 -0700
Subject: Drop support for Renesas H8/300 (h8300) architecture

H8/300 has been dead for several years, and the kernel for it
has not compiled for ages. Drop support for it.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 Documentation/scheduler/sched-arch.txt           |   5 -
 arch/h8300/Kconfig                               | 108 ------
 arch/h8300/Kconfig.cpu                           | 171 ---------
 arch/h8300/Kconfig.debug                         |  68 ----
 arch/h8300/Kconfig.ide                           |  44 ---
 arch/h8300/Makefile                              |  71 ----
 arch/h8300/README                                |  38 --
 arch/h8300/boot/Makefile                         |  22 --
 arch/h8300/boot/compressed/Makefile              |  37 --
 arch/h8300/boot/compressed/head.S                |  47 ---
 arch/h8300/boot/compressed/misc.c                | 180 ---------
 arch/h8300/boot/compressed/vmlinux.lds           |  32 --
 arch/h8300/boot/compressed/vmlinux.scr           |   9 -
 arch/h8300/defconfig                             |  42 ---
 arch/h8300/include/asm/Kbuild                    |   8 -
 arch/h8300/include/asm/asm-offsets.h             |   1 -
 arch/h8300/include/asm/atomic.h                  | 146 --------
 arch/h8300/include/asm/barrier.h                 |  29 --
 arch/h8300/include/asm/bitops.h                  | 211 -----------
 arch/h8300/include/asm/bootinfo.h                |   2 -
 arch/h8300/include/asm/bug.h                     |  12 -
 arch/h8300/include/asm/bugs.h                    |  16 -
 arch/h8300/include/asm/cache.h                   |  13 -
 arch/h8300/include/asm/cachectl.h                |  14 -
 arch/h8300/include/asm/cacheflush.h              |  40 --
 arch/h8300/include/asm/checksum.h                | 102 ------
 arch/h8300/include/asm/cmpxchg.h                 |  60 ---
 arch/h8300/include/asm/cputime.h                 |   6 -
 arch/h8300/include/asm/current.h                 |  25 --
 arch/h8300/include/asm/dbg.h                     |   2 -
 arch/h8300/include/asm/delay.h                   |  38 --
 arch/h8300/include/asm/device.h                  |   7 -
 arch/h8300/include/asm/div64.h                   |   1 -
 arch/h8300/include/asm/dma.h                     |  15 -
 arch/h8300/include/asm/elf.h                     | 101 ------
 arch/h8300/include/asm/emergency-restart.h       |   6 -
 arch/h8300/include/asm/fb.h                      |  12 -
 arch/h8300/include/asm/flat.h                    |  26 --
 arch/h8300/include/asm/fpu.h                     |   1 -
 arch/h8300/include/asm/ftrace.h                  |   1 -
 arch/h8300/include/asm/futex.h                   |   6 -
 arch/h8300/include/asm/gpio-internal.h           |  52 ---
 arch/h8300/include/asm/hardirq.h                 |  19 -
 arch/h8300/include/asm/hw_irq.h                  |   1 -
 arch/h8300/include/asm/io.h                      | 358 ------------------
 arch/h8300/include/asm/irq.h                     |  49 ---
 arch/h8300/include/asm/irq_regs.h                |   1 -
 arch/h8300/include/asm/irqflags.h                |  43 ---
 arch/h8300/include/asm/kdebug.h                  |   1 -
 arch/h8300/include/asm/kmap_types.h              |   6 -
 arch/h8300/include/asm/local.h                   |   6 -
 arch/h8300/include/asm/local64.h                 |   1 -
 arch/h8300/include/asm/mc146818rtc.h             |   9 -
 arch/h8300/include/asm/mmu_context.h             |  32 --
 arch/h8300/include/asm/mutex.h                   |   9 -
 arch/h8300/include/asm/page.h                    |  78 ----
 arch/h8300/include/asm/page_offset.h             |   3 -
 arch/h8300/include/asm/param.h                   |   9 -
 arch/h8300/include/asm/pci.h                     |  19 -
 arch/h8300/include/asm/percpu.h                  |   6 -
 arch/h8300/include/asm/pgalloc.h                 |   8 -
 arch/h8300/include/asm/pgtable.h                 |  73 ----
 arch/h8300/include/asm/processor.h               | 139 -------
 arch/h8300/include/asm/ptrace.h                  |  33 --
 arch/h8300/include/asm/regs267x.h                | 336 -----------------
 arch/h8300/include/asm/regs306x.h                | 212 -----------
 arch/h8300/include/asm/scatterlist.h             |   6 -
 arch/h8300/include/asm/sections.h                |   6 -
 arch/h8300/include/asm/segment.h                 |  49 ---
 arch/h8300/include/asm/sh_bios.h                 |  29 --
 arch/h8300/include/asm/shm.h                     |  31 --
 arch/h8300/include/asm/shmparam.h                |   6 -
 arch/h8300/include/asm/signal.h                  |  24 --
 arch/h8300/include/asm/smp.h                     |   1 -
 arch/h8300/include/asm/spinlock.h                |   6 -
 arch/h8300/include/asm/string.h                  |  44 ---
 arch/h8300/include/asm/switch_to.h               |  50 ---
 arch/h8300/include/asm/target_time.h             |   4 -
 arch/h8300/include/asm/termios.h                 |  50 ---
 arch/h8300/include/asm/thread_info.h             | 103 ------
 arch/h8300/include/asm/timer.h                   |  25 --
 arch/h8300/include/asm/timex.h                   |  19 -
 arch/h8300/include/asm/tlb.h                     |   8 -
 arch/h8300/include/asm/tlbflush.h                |  55 ---
 arch/h8300/include/asm/topology.h                |   6 -
 arch/h8300/include/asm/traps.h                   |  37 --
 arch/h8300/include/asm/types.h                   |   9 -
 arch/h8300/include/asm/uaccess.h                 | 163 ---------
 arch/h8300/include/asm/ucontext.h                |  12 -
 arch/h8300/include/asm/unaligned.h               |  11 -
 arch/h8300/include/asm/unistd.h                  |  36 --
 arch/h8300/include/asm/user.h                    |  75 ----
 arch/h8300/include/asm/virtconvert.h             |  20 -
 arch/h8300/include/uapi/asm/Kbuild               |  34 --
 arch/h8300/include/uapi/asm/auxvec.h             |   4 -
 arch/h8300/include/uapi/asm/bitsperlong.h        |   1 -
 arch/h8300/include/uapi/asm/byteorder.h          |   6 -
 arch/h8300/include/uapi/asm/errno.h              |   6 -
 arch/h8300/include/uapi/asm/fcntl.h              |  11 -
 arch/h8300/include/uapi/asm/ioctl.h              |   1 -
 arch/h8300/include/uapi/asm/ioctls.h             |   8 -
 arch/h8300/include/uapi/asm/ipcbuf.h             |   1 -
 arch/h8300/include/uapi/asm/kvm_para.h           |   1 -
 arch/h8300/include/uapi/asm/mman.h               |   1 -
 arch/h8300/include/uapi/asm/msgbuf.h             |  31 --
 arch/h8300/include/uapi/asm/param.h              |  16 -
 arch/h8300/include/uapi/asm/poll.h               |  11 -
 arch/h8300/include/uapi/asm/posix_types.h        |  26 --
 arch/h8300/include/uapi/asm/ptrace.h             |  44 ---
 arch/h8300/include/uapi/asm/resource.h           |   6 -
 arch/h8300/include/uapi/asm/sembuf.h             |  25 --
 arch/h8300/include/uapi/asm/setup.h              |   6 -
 arch/h8300/include/uapi/asm/shmbuf.h             |  42 ---
 arch/h8300/include/uapi/asm/sigcontext.h         |  18 -
 arch/h8300/include/uapi/asm/siginfo.h            |   6 -
 arch/h8300/include/uapi/asm/signal.h             | 115 ------
 arch/h8300/include/uapi/asm/socket.h             |  79 ----
 arch/h8300/include/uapi/asm/sockios.h            |  13 -
 arch/h8300/include/uapi/asm/stat.h               |  78 ----
 arch/h8300/include/uapi/asm/statfs.h             |   6 -
 arch/h8300/include/uapi/asm/swab.h               |  10 -
 arch/h8300/include/uapi/asm/termbits.h           | 201 ----------
 arch/h8300/include/uapi/asm/termios.h            |  44 ---
 arch/h8300/include/uapi/asm/types.h              |   1 -
 arch/h8300/include/uapi/asm/unistd.h             | 330 -----------------
 arch/h8300/kernel/Makefile                       |  12 -
 arch/h8300/kernel/asm-offsets.c                  |  60 ---
 arch/h8300/kernel/entry.S                        | 402 --------------------
 arch/h8300/kernel/gpio.c                         | 178 ---------
 arch/h8300/kernel/h8300_ksyms.c                  | 100 -----
 arch/h8300/kernel/irq.c                          | 165 ---------
 arch/h8300/kernel/module.c                       |  75 ----
 arch/h8300/kernel/process.c                      | 154 --------
 arch/h8300/kernel/ptrace.c                       | 168 ---------
 arch/h8300/kernel/setup.c                        | 242 ------------
 arch/h8300/kernel/signal.c                       | 444 -----------------------
 arch/h8300/kernel/sys_h8300.c                    |  48 ---
 arch/h8300/kernel/syscalls.S                     | 338 -----------------
 arch/h8300/kernel/time.c                         |  66 ----
 arch/h8300/kernel/timer/Makefile                 |   6 -
 arch/h8300/kernel/timer/itu.c                    |  82 -----
 arch/h8300/kernel/timer/timer16.c                |  77 ----
 arch/h8300/kernel/timer/timer8.c                 | 102 ------
 arch/h8300/kernel/timer/tpu.c                    | 100 -----
 arch/h8300/kernel/traps.c                        | 166 ---------
 arch/h8300/kernel/vmlinux.lds.S                  | 157 --------
 arch/h8300/lib/Makefile                          |   5 -
 arch/h8300/lib/abs.S                             |  21 --
 arch/h8300/lib/ashrdi3.c                         |  63 ----
 arch/h8300/lib/checksum.c                        | 164 ---------
 arch/h8300/lib/memcpy.S                          |  84 -----
 arch/h8300/lib/memset.S                          |  61 ----
 arch/h8300/lib/romfs.S                           |  57 ---
 arch/h8300/mm/Makefile                           |   5 -
 arch/h8300/mm/fault.c                            |  56 ---
 arch/h8300/mm/init.c                             | 155 --------
 arch/h8300/mm/kmap.c                             |  58 ---
 arch/h8300/mm/memory.c                           |  54 ---
 arch/h8300/platform/h8300h/Makefile              |   7 -
 arch/h8300/platform/h8300h/aki3068net/Makefile   |   5 -
 arch/h8300/platform/h8300h/aki3068net/crt0_ram.S | 110 ------
 arch/h8300/platform/h8300h/generic/Makefile      |   5 -
 arch/h8300/platform/h8300h/generic/crt0_ram.S    | 107 ------
 arch/h8300/platform/h8300h/generic/crt0_rom.S    | 122 -------
 arch/h8300/platform/h8300h/h8max/Makefile        |   5 -
 arch/h8300/platform/h8300h/h8max/crt0_ram.S      | 110 ------
 arch/h8300/platform/h8300h/irq.c                 |  82 -----
 arch/h8300/platform/h8300h/ptrace_h8300h.c       | 284 ---------------
 arch/h8300/platform/h8s/Makefile                 |   7 -
 arch/h8300/platform/h8s/edosk2674/Makefile       |   5 -
 arch/h8300/platform/h8s/edosk2674/crt0_ram.S     | 130 -------
 arch/h8300/platform/h8s/edosk2674/crt0_rom.S     | 186 ----------
 arch/h8300/platform/h8s/generic/Makefile         |   5 -
 arch/h8300/platform/h8s/generic/crt0_ram.S       | 127 -------
 arch/h8300/platform/h8s/generic/crt0_rom.S       | 128 -------
 arch/h8300/platform/h8s/irq.c                    | 104 ------
 arch/h8300/platform/h8s/ptrace_h8s.c             |  84 -----
 include/linux/serial_sci.h                       |   2 +-
 tools/testing/ktest/examples/crosstests.conf     |   6 -
 179 files changed, 1 insertion(+), 10890 deletions(-)
 delete mode 100644 arch/h8300/Kconfig
 delete mode 100644 arch/h8300/Kconfig.cpu
 delete mode 100644 arch/h8300/Kconfig.debug
 delete mode 100644 arch/h8300/Kconfig.ide
 delete mode 100644 arch/h8300/Makefile
 delete mode 100644 arch/h8300/README
 delete mode 100644 arch/h8300/boot/Makefile
 delete mode 100644 arch/h8300/boot/compressed/Makefile
 delete mode 100644 arch/h8300/boot/compressed/head.S
 delete mode 100644 arch/h8300/boot/compressed/misc.c
 delete mode 100644 arch/h8300/boot/compressed/vmlinux.lds
 delete mode 100644 arch/h8300/boot/compressed/vmlinux.scr
 delete mode 100644 arch/h8300/defconfig
 delete mode 100644 arch/h8300/include/asm/Kbuild
 delete mode 100644 arch/h8300/include/asm/asm-offsets.h
 delete mode 100644 arch/h8300/include/asm/atomic.h
 delete mode 100644 arch/h8300/include/asm/barrier.h
 delete mode 100644 arch/h8300/include/asm/bitops.h
 delete mode 100644 arch/h8300/include/asm/bootinfo.h
 delete mode 100644 arch/h8300/include/asm/bug.h
 delete mode 100644 arch/h8300/include/asm/bugs.h
 delete mode 100644 arch/h8300/include/asm/cache.h
 delete mode 100644 arch/h8300/include/asm/cachectl.h
 delete mode 100644 arch/h8300/include/asm/cacheflush.h
 delete mode 100644 arch/h8300/include/asm/checksum.h
 delete mode 100644 arch/h8300/include/asm/cmpxchg.h
 delete mode 100644 arch/h8300/include/asm/cputime.h
 delete mode 100644 arch/h8300/include/asm/current.h
 delete mode 100644 arch/h8300/include/asm/dbg.h
 delete mode 100644 arch/h8300/include/asm/delay.h
 delete mode 100644 arch/h8300/include/asm/device.h
 delete mode 100644 arch/h8300/include/asm/div64.h
 delete mode 100644 arch/h8300/include/asm/dma.h
 delete mode 100644 arch/h8300/include/asm/elf.h
 delete mode 100644 arch/h8300/include/asm/emergency-restart.h
 delete mode 100644 arch/h8300/include/asm/fb.h
 delete mode 100644 arch/h8300/include/asm/flat.h
 delete mode 100644 arch/h8300/include/asm/fpu.h
 delete mode 100644 arch/h8300/include/asm/ftrace.h
 delete mode 100644 arch/h8300/include/asm/futex.h
 delete mode 100644 arch/h8300/include/asm/gpio-internal.h
 delete mode 100644 arch/h8300/include/asm/hardirq.h
 delete mode 100644 arch/h8300/include/asm/hw_irq.h
 delete mode 100644 arch/h8300/include/asm/io.h
 delete mode 100644 arch/h8300/include/asm/irq.h
 delete mode 100644 arch/h8300/include/asm/irq_regs.h
 delete mode 100644 arch/h8300/include/asm/irqflags.h
 delete mode 100644 arch/h8300/include/asm/kdebug.h
 delete mode 100644 arch/h8300/include/asm/kmap_types.h
 delete mode 100644 arch/h8300/include/asm/local.h
 delete mode 100644 arch/h8300/include/asm/local64.h
 delete mode 100644 arch/h8300/include/asm/mc146818rtc.h
 delete mode 100644 arch/h8300/include/asm/mmu_context.h
 delete mode 100644 arch/h8300/include/asm/mutex.h
 delete mode 100644 arch/h8300/include/asm/page.h
 delete mode 100644 arch/h8300/include/asm/page_offset.h
 delete mode 100644 arch/h8300/include/asm/param.h
 delete mode 100644 arch/h8300/include/asm/pci.h
 delete mode 100644 arch/h8300/include/asm/percpu.h
 delete mode 100644 arch/h8300/include/asm/pgalloc.h
 delete mode 100644 arch/h8300/include/asm/pgtable.h
 delete mode 100644 arch/h8300/include/asm/processor.h
 delete mode 100644 arch/h8300/include/asm/ptrace.h
 delete mode 100644 arch/h8300/include/asm/regs267x.h
 delete mode 100644 arch/h8300/include/asm/regs306x.h
 delete mode 100644 arch/h8300/include/asm/scatterlist.h
 delete mode 100644 arch/h8300/include/asm/sections.h
 delete mode 100644 arch/h8300/include/asm/segment.h
 delete mode 100644 arch/h8300/include/asm/sh_bios.h
 delete mode 100644 arch/h8300/include/asm/shm.h
 delete mode 100644 arch/h8300/include/asm/shmparam.h
 delete mode 100644 arch/h8300/include/asm/signal.h
 delete mode 100644 arch/h8300/include/asm/smp.h
 delete mode 100644 arch/h8300/include/asm/spinlock.h
 delete mode 100644 arch/h8300/include/asm/string.h
 delete mode 100644 arch/h8300/include/asm/switch_to.h
 delete mode 100644 arch/h8300/include/asm/target_time.h
 delete mode 100644 arch/h8300/include/asm/termios.h
 delete mode 100644 arch/h8300/include/asm/thread_info.h
 delete mode 100644 arch/h8300/include/asm/timer.h
 delete mode 100644 arch/h8300/include/asm/timex.h
 delete mode 100644 arch/h8300/include/asm/tlb.h
 delete mode 100644 arch/h8300/include/asm/tlbflush.h
 delete mode 100644 arch/h8300/include/asm/topology.h
 delete mode 100644 arch/h8300/include/asm/traps.h
 delete mode 100644 arch/h8300/include/asm/types.h
 delete mode 100644 arch/h8300/include/asm/uaccess.h
 delete mode 100644 arch/h8300/include/asm/ucontext.h
 delete mode 100644 arch/h8300/include/asm/unaligned.h
 delete mode 100644 arch/h8300/include/asm/unistd.h
 delete mode 100644 arch/h8300/include/asm/user.h
 delete mode 100644 arch/h8300/include/asm/virtconvert.h
 delete mode 100644 arch/h8300/include/uapi/asm/Kbuild
 delete mode 100644 arch/h8300/include/uapi/asm/auxvec.h
 delete mode 100644 arch/h8300/include/uapi/asm/bitsperlong.h
 delete mode 100644 arch/h8300/include/uapi/asm/byteorder.h
 delete mode 100644 arch/h8300/include/uapi/asm/errno.h
 delete mode 100644 arch/h8300/include/uapi/asm/fcntl.h
 delete mode 100644 arch/h8300/include/uapi/asm/ioctl.h
 delete mode 100644 arch/h8300/include/uapi/asm/ioctls.h
 delete mode 100644 arch/h8300/include/uapi/asm/ipcbuf.h
 delete mode 100644 arch/h8300/include/uapi/asm/kvm_para.h
 delete mode 100644 arch/h8300/include/uapi/asm/mman.h
 delete mode 100644 arch/h8300/include/uapi/asm/msgbuf.h
 delete mode 100644 arch/h8300/include/uapi/asm/param.h
 delete mode 100644 arch/h8300/include/uapi/asm/poll.h
 delete mode 100644 arch/h8300/include/uapi/asm/posix_types.h
 delete mode 100644 arch/h8300/include/uapi/asm/ptrace.h
 delete mode 100644 arch/h8300/include/uapi/asm/resource.h
 delete mode 100644 arch/h8300/include/uapi/asm/sembuf.h
 delete mode 100644 arch/h8300/include/uapi/asm/setup.h
 delete mode 100644 arch/h8300/include/uapi/asm/shmbuf.h
 delete mode 100644 arch/h8300/include/uapi/asm/sigcontext.h
 delete mode 100644 arch/h8300/include/uapi/asm/siginfo.h
 delete mode 100644 arch/h8300/include/uapi/asm/signal.h
 delete mode 100644 arch/h8300/include/uapi/asm/socket.h
 delete mode 100644 arch/h8300/include/uapi/asm/sockios.h
 delete mode 100644 arch/h8300/include/uapi/asm/stat.h
 delete mode 100644 arch/h8300/include/uapi/asm/statfs.h
 delete mode 100644 arch/h8300/include/uapi/asm/swab.h
 delete mode 100644 arch/h8300/include/uapi/asm/termbits.h
 delete mode 100644 arch/h8300/include/uapi/asm/termios.h
 delete mode 100644 arch/h8300/include/uapi/asm/types.h
 delete mode 100644 arch/h8300/include/uapi/asm/unistd.h
 delete mode 100644 arch/h8300/kernel/Makefile
 delete mode 100644 arch/h8300/kernel/asm-offsets.c
 delete mode 100644 arch/h8300/kernel/entry.S
 delete mode 100644 arch/h8300/kernel/gpio.c
 delete mode 100644 arch/h8300/kernel/h8300_ksyms.c
 delete mode 100644 arch/h8300/kernel/irq.c
 delete mode 100644 arch/h8300/kernel/module.c
 delete mode 100644 arch/h8300/kernel/process.c
 delete mode 100644 arch/h8300/kernel/ptrace.c
 delete mode 100644 arch/h8300/kernel/setup.c
 delete mode 100644 arch/h8300/kernel/signal.c
 delete mode 100644 arch/h8300/kernel/sys_h8300.c
 delete mode 100644 arch/h8300/kernel/syscalls.S
 delete mode 100644 arch/h8300/kernel/time.c
 delete mode 100644 arch/h8300/kernel/timer/Makefile
 delete mode 100644 arch/h8300/kernel/timer/itu.c
 delete mode 100644 arch/h8300/kernel/timer/timer16.c
 delete mode 100644 arch/h8300/kernel/timer/timer8.c
 delete mode 100644 arch/h8300/kernel/timer/tpu.c
 delete mode 100644 arch/h8300/kernel/traps.c
 delete mode 100644 arch/h8300/kernel/vmlinux.lds.S
 delete mode 100644 arch/h8300/lib/Makefile
 delete mode 100644 arch/h8300/lib/abs.S
 delete mode 100644 arch/h8300/lib/ashrdi3.c
 delete mode 100644 arch/h8300/lib/checksum.c
 delete mode 100644 arch/h8300/lib/memcpy.S
 delete mode 100644 arch/h8300/lib/memset.S
 delete mode 100644 arch/h8300/lib/romfs.S
 delete mode 100644 arch/h8300/mm/Makefile
 delete mode 100644 arch/h8300/mm/fault.c
 delete mode 100644 arch/h8300/mm/init.c
 delete mode 100644 arch/h8300/mm/kmap.c
 delete mode 100644 arch/h8300/mm/memory.c
 delete mode 100644 arch/h8300/platform/h8300h/Makefile
 delete mode 100644 arch/h8300/platform/h8300h/aki3068net/Makefile
 delete mode 100644 arch/h8300/platform/h8300h/aki3068net/crt0_ram.S
 delete mode 100644 arch/h8300/platform/h8300h/generic/Makefile
 delete mode 100644 arch/h8300/platform/h8300h/generic/crt0_ram.S
 delete mode 100644 arch/h8300/platform/h8300h/generic/crt0_rom.S
 delete mode 100644 arch/h8300/platform/h8300h/h8max/Makefile
 delete mode 100644 arch/h8300/platform/h8300h/h8max/crt0_ram.S
 delete mode 100644 arch/h8300/platform/h8300h/irq.c
 delete mode 100644 arch/h8300/platform/h8300h/ptrace_h8300h.c
 delete mode 100644 arch/h8300/platform/h8s/Makefile
 delete mode 100644 arch/h8300/platform/h8s/edosk2674/Makefile
 delete mode 100644 arch/h8300/platform/h8s/edosk2674/crt0_ram.S
 delete mode 100644 arch/h8300/platform/h8s/edosk2674/crt0_rom.S
 delete mode 100644 arch/h8300/platform/h8s/generic/Makefile
 delete mode 100644 arch/h8300/platform/h8s/generic/crt0_ram.S
 delete mode 100644 arch/h8300/platform/h8s/generic/crt0_rom.S
 delete mode 100644 arch/h8300/platform/h8s/irq.c
 delete mode 100644 arch/h8300/platform/h8s/ptrace_h8s.c

(limited to 'arch')

diff --git a/Documentation/scheduler/sched-arch.txt b/Documentation/scheduler/sched-arch.txt
index b1b8587b86f0..9290de703450 100644
--- a/Documentation/scheduler/sched-arch.txt
+++ b/Documentation/scheduler/sched-arch.txt
@@ -65,11 +65,6 @@ Possible arch/ problems
 
 Possible arch problems I found (and either tried to fix or didn't):
 
-h8300 - Is such sleeping racy vs interrupts? (See #4a).
-        The H8/300 manual I found indicates yes, however disabling IRQs
-        over the sleep mean only NMIs can wake it up, so can't fix easily
-        without doing spin waiting.
-
 ia64 - is safe_halt call racy vs interrupts? (does it sleep?) (See #4a)
 
 sh64 - Is sleeping racy vs interrupts? (See #4a)
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
deleted file mode 100644
index 24b1dc2564f1..000000000000
--- a/arch/h8300/Kconfig
+++ /dev/null
@@ -1,108 +0,0 @@
-config H8300
-	bool
-	default y
-	select HAVE_IDE
-	select GENERIC_ATOMIC64
-	select HAVE_UID16
-	select VIRT_TO_BUS
-	select ARCH_WANT_IPC_PARSE_VERSION
-	select GENERIC_IRQ_SHOW
-	select GENERIC_CPU_DEVICES
-	select MODULES_USE_ELF_RELA
-	select OLD_SIGSUSPEND3
-	select OLD_SIGACTION
-	select HAVE_UNDERSCORE_SYMBOL_PREFIX
-
-config MMU
-	bool
-	default n
-
-config SWAP
-	bool
-	default n
-
-config ZONE_DMA
-	bool
-	default y
-
-config FPU
-	bool
-	default n
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default n
-
-config ARCH_HAS_ILOG2_U32
-	bool
-	default n
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
-config GENERIC_HWEIGHT
-	bool
-	default y
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config GENERIC_BUG
-        bool
-        depends on BUG
-
-config TIME_LOW_RES
-	bool
-	default y
-
-config NO_IOPORT
-	def_bool y
-
-config NO_DMA
-	def_bool y
-
-config ISA
-	bool
-	default y
-
-config PCI
-	bool
-	default n
-
-config HZ
-	int
-	default 100
-
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
-source "arch/h8300/Kconfig.cpu"
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "arch/h8300/Kconfig.ide"
-
-source "fs/Kconfig"
-
-source "arch/h8300/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/arch/h8300/Kconfig.cpu b/arch/h8300/Kconfig.cpu
deleted file mode 100644
index cdee771460ed..000000000000
--- a/arch/h8300/Kconfig.cpu
+++ /dev/null
@@ -1,171 +0,0 @@
-menu "Processor type and features"
-
-choice
-	prompt "H8/300 platform"
-	default H8300H_GENERIC
-
-config H8300H_GENERIC
-	bool "H8/300H Generic"
-	help
-	  H8/300H CPU Generic Hardware Support
-
-config H8300H_AKI3068NET
-	bool "AE-3068/69"
-	select H83068
-	help
-	  AKI-H8/3068F / AKI-H8/3069F Flashmicom LAN Board Support
-	  More Information. (Japanese Only)
-	  <http://akizukidenshi.com/catalog/default.aspx>
-	  AE-3068/69 Evaluation Board Support
-	  More Information.
-	  <http://www.microtronique.com/ae3069lan.htm>
-
-config H8300H_H8MAX
-	bool "H8MAX"
-	select H83068
-	help
-	  H8MAX Evaluation Board Support
-	  More Information. (Japanese Only)
-	  <http://strawberry-linux.com/h8/index.html>
-
-config H8300H_SIM
-	bool "H8/300H Simulator"
-	select H83007
-	help
-	  GDB Simulator Support
-	  More Information.
-	  <http://sourceware.org/sid/>
-
-config H8S_GENERIC
-	bool "H8S Generic"
-	help
-	  H8S CPU Generic Hardware Support
-
-config H8S_EDOSK2674
-	bool "EDOSK-2674"
-	select H8S2678
-	help
-	  Renesas EDOSK-2674 Evaluation Board Support
-	  More Information.
-	  <http://www.azpower.com/H8-uClinux/index.html>
- 	  <http://www.renesas.eu/products/tools/introductory_evaluation_tools/evaluation_development_os_kits/edosk2674r/edosk2674r_software_tools_root.jsp>
-
-config H8S_SIM
-	bool "H8S Simulator"
-	help
-	  GDB Simulator Support
-	  More Information.
-	  <http://sourceware.org/sid/>
-
-endchoice
-
-choice
-	prompt "CPU Selection"
-
-config H83002
-	bool "H8/3001,3002,3003"
-	depends on BROKEN
-	select CPU_H8300H
-
-config H83007
-	bool "H8/3006,3007"
-	select CPU_H8300H
-
-config H83048
-	bool "H8/3044,3045,3046,3047,3048,3052"
-	depends on BROKEN
-	select CPU_H8300H
-
-config H83068
-	bool "H8/3065,3066,3067,3068,3069"
-	select CPU_H8300H
-
-config H8S2678
-	bool "H8S/2670,2673,2674R,2675,2676"
-	select CPU_H8S
-
-endchoice
-
-config CPU_CLOCK
-	int "CPU Clock Frequency (/1KHz)"
-	default "20000"
-	help
-	  CPU Clock Frequency divide to 1000
-
-choice
-	prompt "Kernel executes from"
-	---help---
-	  Choose the memory type that the kernel will be running in.
-
-config RAMKERNEL
-	bool "RAM"
-	help
-	  The kernel will be resident in RAM when running.
-
-config ROMKERNEL
-	bool "ROM"
-	help
-	  The kernel will be resident in FLASH/ROM when running.
-endchoice
-
-
-config CPU_H8300H
-	bool
-	depends on (H83002 || H83007 || H83048 || H83068)
-	default y
-
-config CPU_H8S
-	bool
-	depends on H8S2678
-	default y
-
-choice
-	prompt "Timer"
-config H8300_TIMER8
-	bool "8bit timer (2ch cascade)"
-	depends on (H83007 || H83068 || H8S2678)
-
-config H8300_TIMER16
-	bool "16bit timer"
-	depends on (H83007 || H83068)
-
-config H8300_ITU
-	bool "ITU"
-	depends on (H83002 || H83048)
-
-config H8300_TPU
-	bool "TPU"
-	depends on H8S2678
-endchoice
-
-if H8300_TIMER8
-choice
-	prompt "Timer Channel"
-config H8300_TIMER8_CH0
-	bool "Channel 0"
-config H8300_TIMER8_CH2
-	bool "Channel 2"
-	depends on CPU_H8300H
-endchoice
-endif
-
-config H8300_TIMER16_CH
-	int "16bit timer channel (0 - 2)"
-	depends on H8300_TIMER16
-	range 0 2
-
-config H8300_ITU_CH
-	int "ITU channel"
-	depends on H8300_ITU
-	range 0 4
-
-config H8300_TPU_CH
-	int "TPU channel"
-	depends on H8300_TPU
-	range 0 4
-
-source "kernel/Kconfig.preempt"
-
-source "mm/Kconfig"
-
-endmenu
diff --git a/arch/h8300/Kconfig.debug b/arch/h8300/Kconfig.debug
deleted file mode 100644
index e8d1b236ad8c..000000000000
--- a/arch/h8300/Kconfig.debug
+++ /dev/null
@@ -1,68 +0,0 @@
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config FULLDEBUG
-	bool "Full Symbolic/Source Debugging support"
-	help
-	  Enable debugging symbols on kernel build.
-
-config HIGHPROFILE
-	bool "Use fast second timer for profiling"
-	help
-	  Use a fast secondary clock to produce profiling information.
-
-config NO_KERNEL_MSG
-	bool "Suppress Kernel BUG Messages"
-	help
-	  Do not output any debug BUG messages within the kernel.
-
-config GDB_MAGICPRINT
-	bool "Message Output for GDB MagicPrint service"
-	depends on (H8300H_SIM || H8S_SIM)
-	help
-	  kernel messages output using MagicPrint service from GDB
-
-config SYSCALL_PRINT
-	bool "SystemCall trace print"
-	help
-	  output history of systemcall
-
-config GDB_DEBUG
-   	bool "Use gdb stub"
-	depends on (!H8300H_SIM && !H8S_SIM)
-	help
-	  gdb stub exception support
-
-config SH_STANDARD_BIOS
-	bool "Use gdb protocol serial console"
-	depends on (!H8300H_SIM && !H8S_SIM)
-	help
-	  serial console output using GDB protocol.
-	  Require eCos/RedBoot
-
-config DEFAULT_CMDLINE
-	bool "Use builtin commandline"
-	default n
-	help
-	  builtin kernel commandline enabled.
-
-config KERNEL_COMMAND
-	string "Buildin command string"
-	depends on DEFAULT_CMDLINE
-	help
-	  builtin kernel commandline strings.
-
-config BLKDEV_RESERVE
-	bool "BLKDEV Reserved Memory"
-	default n
-	help
-	  Reserved BLKDEV area.
-
-config BLKDEV_RESERVE_ADDRESS
-	hex 'start address'
-	depends on BLKDEV_RESERVE
-	help
-	  BLKDEV start address.
-
-endmenu
diff --git a/arch/h8300/Kconfig.ide b/arch/h8300/Kconfig.ide
deleted file mode 100644
index a38a63054ac2..000000000000
--- a/arch/h8300/Kconfig.ide
+++ /dev/null
@@ -1,44 +0,0 @@
-# uClinux H8/300 Target Board Selection Menu (IDE)
-
-if (H8300H_AKI3068NET)
-menu "IDE Extra configuration"
-
-config H8300_IDE_BASE
-	hex "IDE register base address"
-	depends on IDE
-	default 0
-	help
-	  IDE registers base address
-
-config H8300_IDE_ALT
-	hex "IDE register alternate address"
-	depends on IDE
-	default 0
-	help
-	  IDE alternate registers address
-
-config H8300_IDE_IRQ
-	int "IDE IRQ no"
-	depends on IDE
-	default 0
-	help
-	  IDE use IRQ no
-endmenu
-endif
-
-if (H8300H_H8MAX)
-config H8300_IDE_BASE
-	hex
-	depends on IDE
-	default 0x200000
-
-config H8300_IDE_ALT
-	hex
-	depends on IDE
-	default 0x60000c
-
-config H8300_IDE_IRQ
-	int
-	depends on IDE
-	default 5
-endif
diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile
deleted file mode 100644
index a556447877b4..000000000000
--- a/arch/h8300/Makefile
+++ /dev/null
@@ -1,71 +0,0 @@
-#
-# arch/h8300/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# (C) Copyright 2002,2003 Yoshinori Sato <ysato@users.sourceforge.jp>
-#
-
-platform-$(CONFIG_CPU_H8300H)	:= h8300h
-platform-$(CONFIG_CPU_H8S)	:= h8s
-PLATFORM := $(platform-y)
-
-board-$(CONFIG_H8300H_GENERIC)		:= generic
-board-$(CONFIG_H8300H_AKI3068NET)	:= aki3068net
-board-$(CONFIG_H8300H_H8MAX)		:= h8max
-board-$(CONFIG_H8300H_SIM)		:= generic
-board-$(CONFIG_H8S_GENERIC)		:= generic
-board-$(CONFIG_H8S_EDOSK2674)		:= edosk2674
-board-$(CONFIG_H8S_SIM)			:= generic
-BOARD := $(board-y)
-
-model-$(CONFIG_RAMKERNEL)	:= ram
-model-$(CONFIG_ROMKERNEL)	:= rom
-MODEL := $(model-y)
-
-cflags-$(CONFIG_CPU_H8300H)	:= -mh
-ldflags-$(CONFIG_CPU_H8300H)	:= -mh8300helf
-cflags-$(CONFIG_CPU_H8S)	:= -ms
-ldflags-$(CONFIG_CPU_H8S)	:= -mh8300self
-
-KBUILD_CFLAGS += $(cflags-y)
-KBUILD_CFLAGS += -mint32 -fno-builtin
-KBUILD_CFLAGS += -g
-KBUILD_CFLAGS += -D__linux__
-KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
-KBUILD_AFLAGS += -DPLATFORM=$(PLATFORM) -DMODEL=$(MODEL) $(cflags-y)
-LDFLAGS += $(ldflags-y)
-
-CROSS_COMPILE = h8300-elf-
-LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-
-head-y := arch/$(ARCH)/platform/$(PLATFORM)/$(BOARD)/crt0_$(MODEL).o
-
-core-y	+= arch/$(ARCH)/kernel/ \
-	   arch/$(ARCH)/mm/
-ifdef PLATFORM
-core-y	+= arch/$(ARCH)/platform/$(PLATFORM)/ \
-	   arch/$(ARCH)/platform/$(PLATFORM)/$(BOARD)/
-endif
-
-libs-y	+= arch/$(ARCH)/lib/ $(LIBGCC)
-
-boot := arch/h8300/boot
-
-export MODEL PLATFORM BOARD
-
-archmrproper:
-
-archclean:
-	$(Q)$(MAKE) $(clean)=$(boot)
-
-vmlinux.srec vmlinux.bin zImage: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-
-define archhelp
-  @echo  'vmlinux.bin  - Create raw binary'
-  @echo  'vmlinux.srec - Create srec binary'
-  @echo  'zImage       - Compressed kernel image'
-endef
diff --git a/arch/h8300/README b/arch/h8300/README
deleted file mode 100644
index efa805fda19b..000000000000
--- a/arch/h8300/README
+++ /dev/null
@@ -1,38 +0,0 @@
-linux-2.6 for H8/300 README
-Yoshinori Sato <ysato@users.sourceforge.jp>
-
-* Supported CPU
-H8/300H and H8S
-
-* Supported Target
-1.simulator of GDB
-  require patches.
-
-2.AE 3068/AE 3069
-  more information 
-  MICROTRONIQUE <http://www.microtronique.com/>
-  Akizuki Denshi Tsusho Ltd. <http://akizukidenshi.com/> (Japanese Only)
-
-3.H8MAX 
-  see http://ip-sol.jp/h8max/ (Japanese Only)
-
-4.EDOSK2674
-  see http://www.eu.renesas.com/products/mpumcu/tool/edk/support/edosk2674.html
-      http://www.uclinux.org/pub/uClinux/ports/h8/HITACHI-EDOSK2674-HOWTO
-      http://www.azpower.com/H8-uClinux/
-
-* Toolchain Version
-gcc-3.1 or higher and patch
-see arch/h8300/tools_patch/README
-binutils-2.12 or higher
-gdb-5.2 or higher
-The environment that can compile a h8300-elf binary is necessary.
-
-* Userland Develop environment
-used h8300-elf toolchains.
-see http://www.uclinux.org/pub/uClinux/ports/h8/
-
-* A few words of thanks
-Porting to H8/300 serieses is support of Information-technology Promotion Agency, Japan.
-I thank support.
-and All developer/user.
diff --git a/arch/h8300/boot/Makefile b/arch/h8300/boot/Makefile
deleted file mode 100644
index 0bb62e064eea..000000000000
--- a/arch/h8300/boot/Makefile
+++ /dev/null
@@ -1,22 +0,0 @@
-# arch/h8300/boot/Makefile
-
-targets := vmlinux.srec vmlinux.bin zImage
-subdir- := compressed
-
-OBJCOPYFLAGS_vmlinux.srec := -Osrec
-OBJCOPYFLAGS_vmlinux.bin  := -Obinary
-OBJCOPYFLAGS_zImage := -O binary -R .note -R .comment -R .stab -R .stabstr -S
-
-$(obj)/vmlinux.srec $(obj)/vmlinux.bin:  vmlinux FORCE
-	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
-
-$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
-	$(call if_changed,objcopy)
-	@echo 'Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
-
-CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec
-
diff --git a/arch/h8300/boot/compressed/Makefile b/arch/h8300/boot/compressed/Makefile
deleted file mode 100644
index a6c98fe3bbc3..000000000000
--- a/arch/h8300/boot/compressed/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-#
-# linux/arch/sh/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-
-targets		:= vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
-asflags-y	:= -traditional
-
-OBJECTS = $(obj)/head.o $(obj)/misc.o
-
-#
-# IMAGE_OFFSET is the load offset of the compression loader
-# Assign dummy values if these 2 variables are not defined,
-# in order to suppress error message.
-#
-CONFIG_MEMORY_START     ?= 0x00400000
-CONFIG_BOOT_LINK_OFFSET ?= 0x00140000
-IMAGE_OFFSET := $(shell printf "0x%08x" $$(($(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET))))
-
-LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -estartup $(obj)/vmlinux.lds
-
-$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
-	$(call if_changed,ld)
-	@:
-
-$(obj)/vmlinux.bin: vmlinux FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,gzip)
-
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-h8300 -T
-OBJCOPYFLAGS := -O binary
-
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,ld)
diff --git a/arch/h8300/boot/compressed/head.S b/arch/h8300/boot/compressed/head.S
deleted file mode 100644
index 10e9a2d1cc6c..000000000000
--- a/arch/h8300/boot/compressed/head.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- *  linux/arch/h8300/boot/compressed/head.S
- *
- *  Copyright (C) 2006 Yoshinori Sato
- */
-
-	.h8300h
-#include <linux/linkage.h>
-
-#define SRAM_START 0xff4000
-
-	.section	.text..startup
-	.global	startup
-startup:
-	mov.l	#SRAM_START+0x8000, sp
-	mov.l	#__sbss, er0
-	mov.l	#__ebss, er1
-	sub.l	er0, er1
-	shlr	er1
-	shlr	er1
-	sub.l	er2, er2
-1:
-	mov.l	er2, @er0
-	adds	#4, er0
-	dec.l	#1, er1
-	bne	1b
-	jsr	@_decompress_kernel
-	jmp	@0x400000
-
-	.align	9
-fake_headers_as_bzImage:
-	.word	0
-	.ascii	"HdrS"		; header signature
-	.word	0x0202		; header version number (>= 0x0105)
-				; or else old loadlin-1.5 will fail)
-	.word	0		; default_switch
-	.word	0		; SETUPSEG
-	.word	0x1000
-	.word	0		; pointing to kernel version string
-	.byte	0		; = 0, old one (LILO, Loadlin,
-				; 0xTV: T=0 for LILO
-				;       V = version
-	.byte	1		; Load flags bzImage=1
-	.word	0x8000		; size to move, when setup is not
-	.long	0x100000	; 0x100000 = default for big kernel
-	.long	0		; address of loaded ramdisk image
-	.long	0		; its size in bytes
diff --git a/arch/h8300/boot/compressed/misc.c b/arch/h8300/boot/compressed/misc.c
deleted file mode 100644
index 4a1e3dd43948..000000000000
--- a/arch/h8300/boot/compressed/misc.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * arch/h8300/boot/compressed/misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- *
- * Adapted for h8300 by Yoshinori Sato 2006
- */
-
-#include <asm/uaccess.h>
-
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-#define STATIC static
-
-#undef memset
-#undef memcpy
-#define memzero(s, n)     memset ((s), 0, (n))
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
-
-static uch *inbuf;	     /* input buffer */
-static uch window[WSIZE];    /* Sliding window buffer */
-
-static unsigned insize = 0;  /* valid bytes in inbuf */
-static unsigned inptr = 0;   /* index of next byte to be processed in inbuf */
-static unsigned outcnt = 0;  /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ASCII text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-static int  fill_inbuf(void);
-static void flush_window(void);
-static void error(char *m);
-
-extern char input_data[];
-extern int input_len;
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-
-static void error(char *m);
-
-int puts(const char *);
-
-extern int _end;
-static unsigned long free_mem_ptr;
-static unsigned long free_mem_end_ptr;
-
-#define HEAP_SIZE             0x10000
-
-#include "../../../../lib/inflate.c"
-
-#define SCR *((volatile unsigned char *)0xffff8a)
-#define TDR *((volatile unsigned char *)0xffff8b)
-#define SSR *((volatile unsigned char *)0xffff8c)
-
-int puts(const char *s)
-{
-	return 0;
-}
-
-void* memset(void* s, int c, size_t n)
-{
-	int i;
-	char *ss = (char*)s;
-
-	for (i=0;i<n;i++) ss[i] = c;
-	return s;
-}
-
-void* memcpy(void* __dest, __const void* __src,
-			    size_t __n)
-{
-	int i;
-	char *d = (char *)__dest, *s = (char *)__src;
-
-	for (i=0;i<__n;i++) d[i] = s[i];
-	return __dest;
-}
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-static int fill_inbuf(void)
-{
-	if (insize != 0) {
-		error("ran out of input data");
-	}
-
-	inbuf = input_data;
-	insize = input_len;
-	inptr = 1;
-	return inbuf[0];
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void flush_window(void)
-{
-    ulg c = crc;         /* temporary variable */
-    unsigned n;
-    uch *in, *out, ch;
-
-    in = window;
-    out = &output_data[output_ptr];
-    for (n = 0; n < outcnt; n++) {
-	    ch = *out++ = *in++;
-	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    output_ptr += (ulg)outcnt;
-    outcnt = 0;
-}
-
-static void error(char *x)
-{
-	puts("\n\n");
-	puts(x);
-	puts("\n\n -- System halted");
-
-	while(1);	/* Halt */
-}
-
-#define STACK_SIZE (4096)
-long user_stack [STACK_SIZE];
-long* stack_start = &user_stack[STACK_SIZE];
-
-void decompress_kernel(void)
-{
-	output_data = 0;
-	output_ptr = (unsigned long)0x400000;
-	free_mem_ptr = (unsigned long)&_end;
-	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
-
-	makecrc();
-	puts("Uncompressing Linux... ");
-	gunzip();
-	puts("Ok, booting the kernel.\n");
-}
diff --git a/arch/h8300/boot/compressed/vmlinux.lds b/arch/h8300/boot/compressed/vmlinux.lds
deleted file mode 100644
index a0a3a0ed54ef..000000000000
--- a/arch/h8300/boot/compressed/vmlinux.lds
+++ /dev/null
@@ -1,32 +0,0 @@
-SECTIONS
-{
-        .text :
-        {
-        __stext = . ;
-	__text = .;
-	       *(.text..startup)
-	       *(.text)
-        __etext = . ;
-        }
-
-	.rodata :
-	{
-		*(.rodata)
-	}
-        .data :
-
-        {
-        __sdata = . ;
-        ___data_start = . ;
-                *(.data.*)
-	}
-        .bss :
-        {
-        . = ALIGN(0x4) ;
-        __sbss = . ;
-                *(.bss*)
-        . = ALIGN(0x4) ;
-        __ebss = . ;
-        __end = . ;
-        }
-}
diff --git a/arch/h8300/boot/compressed/vmlinux.scr b/arch/h8300/boot/compressed/vmlinux.scr
deleted file mode 100644
index a0f6962736e9..000000000000
--- a/arch/h8300/boot/compressed/vmlinux.scr
+++ /dev/null
@@ -1,9 +0,0 @@
-SECTIONS
-{
-  .data : {
-	_input_len = .;
-	LONG(_input_data_end - _input_data) _input_data = .;
-	*(.data)
-	_input_data_end = .;
-	}
-}
diff --git a/arch/h8300/defconfig b/arch/h8300/defconfig
deleted file mode 100644
index 042425a02645..000000000000
--- a/arch/h8300/defconfig
+++ /dev/null
@@ -1,42 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLOB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_H83007=y
-CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_ZFLAT=y
-CONFIG_BINFMT_MISC=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_UCLINUX=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/h8300/include/asm/Kbuild b/arch/h8300/include/asm/Kbuild
deleted file mode 100644
index 8ada3cf0c98d..000000000000
--- a/arch/h8300/include/asm/Kbuild
+++ /dev/null
@@ -1,8 +0,0 @@
-
-generic-y += clkdev.h
-generic-y += exec.h
-generic-y += linkage.h
-generic-y += mmu.h
-generic-y += module.h
-generic-y += trace_clock.h
-generic-y += xor.h
diff --git a/arch/h8300/include/asm/asm-offsets.h b/arch/h8300/include/asm/asm-offsets.h
deleted file mode 100644
index d370ee36a182..000000000000
--- a/arch/h8300/include/asm/asm-offsets.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <generated/asm-offsets.h>
diff --git a/arch/h8300/include/asm/atomic.h b/arch/h8300/include/asm/atomic.h
deleted file mode 100644
index 40901e353c21..000000000000
--- a/arch/h8300/include/asm/atomic.h
+++ /dev/null
@@ -1,146 +0,0 @@
-#ifndef __ARCH_H8300_ATOMIC__
-#define __ARCH_H8300_ATOMIC__
-
-#include <linux/types.h>
-#include <asm/cmpxchg.h>
-
-/*
- * Atomic operations that C can't guarantee us.  Useful for
- * resource counting etc..
- */
-
-#define ATOMIC_INIT(i)	{ (i) }
-
-#define atomic_read(v)		(*(volatile int *)&(v)->counter)
-#define atomic_set(v, i)	(((v)->counter) = i)
-
-#include <linux/kernel.h>
-
-static __inline__ int atomic_add_return(int i, atomic_t *v)
-{
-	unsigned long flags;
-	int ret;
-	local_irq_save(flags);
-	ret = v->counter += i;
-	local_irq_restore(flags);
-	return ret;
-}
-
-#define atomic_add(i, v) atomic_add_return(i, v)
-#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
-
-static __inline__ int atomic_sub_return(int i, atomic_t *v)
-{
-	unsigned long flags;
-	int ret;
-	local_irq_save(flags);
-	ret = v->counter -= i;
-	local_irq_restore(flags);
-	return ret;
-}
-
-#define atomic_sub(i, v) atomic_sub_return(i, v)
-#define atomic_sub_and_test(i,v) (atomic_sub_return(i, v) == 0)
-
-static __inline__ int atomic_inc_return(atomic_t *v)
-{
-	unsigned long flags;
-	int ret;
-	local_irq_save(flags);
-	v->counter++;
-	ret = v->counter;
-	local_irq_restore(flags);
-	return ret;
-}
-
-#define atomic_inc(v) atomic_inc_return(v)
-
-/*
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
-
-static __inline__ int atomic_dec_return(atomic_t *v)
-{
-	unsigned long flags;
-	int ret;
-	local_irq_save(flags);
-	--v->counter;
-	ret = v->counter;
-	local_irq_restore(flags);
-	return ret;
-}
-
-#define atomic_dec(v) atomic_dec_return(v)
-
-static __inline__ int atomic_dec_and_test(atomic_t *v)
-{
-	unsigned long flags;
-	int ret;
-	local_irq_save(flags);
-	--v->counter;
-	ret = v->counter;
-	local_irq_restore(flags);
-	return ret == 0;
-}
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
-	int ret;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	ret = v->counter;
-	if (likely(ret == old))
-		v->counter = new;
-	local_irq_restore(flags);
-	return ret;
-}
-
-static inline int __atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int ret;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	ret = v->counter;
-	if (ret != u)
-		v->counter += a;
-	local_irq_restore(flags);
-	return ret;
-}
-
-static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v)
-{
-	__asm__ __volatile__("stc ccr,r1l\n\t"
-	                     "orc #0x80,ccr\n\t"
-	                     "mov.l %0,er0\n\t"
-	                     "and.l %1,er0\n\t"
-	                     "mov.l er0,%0\n\t"
-	                     "ldc r1l,ccr" 
-                             : "=m" (*v) : "g" (~(mask)) :"er0","er1");
-}
-
-static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v)
-{
-	__asm__ __volatile__("stc ccr,r1l\n\t"
-	                     "orc #0x80,ccr\n\t"
-	                     "mov.l %0,er0\n\t"
-	                     "or.l %1,er0\n\t"
-	                     "mov.l er0,%0\n\t"
-	                     "ldc r1l,ccr" 
-                             : "=m" (*v) : "g" (mask) :"er0","er1");
-}
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec()    barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc()    barrier()
-#define smp_mb__after_atomic_inc() barrier()
-
-#endif /* __ARCH_H8300_ATOMIC __ */
diff --git a/arch/h8300/include/asm/barrier.h b/arch/h8300/include/asm/barrier.h
deleted file mode 100644
index 9e0aa9fc195d..000000000000
--- a/arch/h8300/include/asm/barrier.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _H8300_BARRIER_H
-#define _H8300_BARRIER_H
-
-#define nop()  asm volatile ("nop"::)
-
-/*
- * Force strict CPU ordering.
- * Not really required on H8...
- */
-#define mb()   asm volatile (""   : : :"memory")
-#define rmb()  asm volatile (""   : : :"memory")
-#define wmb()  asm volatile (""   : : :"memory")
-#define set_mb(var, value) do { xchg(&var, value); } while (0)
-
-#define read_barrier_depends()	do { } while (0)
-
-#ifdef CONFIG_SMP
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	wmb()
-#define smp_read_barrier_depends()	read_barrier_depends()
-#else
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	do { } while(0)
-#endif
-
-#endif /* _H8300_BARRIER_H */
diff --git a/arch/h8300/include/asm/bitops.h b/arch/h8300/include/asm/bitops.h
deleted file mode 100644
index eb34e0cd33d5..000000000000
--- a/arch/h8300/include/asm/bitops.h
+++ /dev/null
@@ -1,211 +0,0 @@
-#ifndef _H8300_BITOPS_H
-#define _H8300_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- * Copyright 2002, Yoshinori Sato
- */
-
-#include <linux/compiler.h>
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-/*
- * Function prototypes to keep gcc -Wall happy
- */
-
-/*
- * ffz = Find First Zero in word. Undefined if no zero exists,
- * so code should check against ~0UL first..
- */
-static __inline__ unsigned long ffz(unsigned long word)
-{
-	unsigned long result;
-
-	result = -1;
-	__asm__("1:\n\t"
-		"shlr.l %2\n\t"
-		"adds #1,%0\n\t"
-		"bcs 1b"
-		: "=r" (result)
-		: "0"  (result),"r" (word));
-	return result;
-}
-
-#define H8300_GEN_BITOP_CONST(OP,BIT)			    \
-	case BIT:					    \
-	__asm__(OP " #" #BIT ",@%0"::"r"(b_addr):"memory"); \
-	break;
-
-#define H8300_GEN_BITOP(FNAME,OP)				      \
-static __inline__ void FNAME(int nr, volatile unsigned long* addr)    \
-{								      \
-	volatile unsigned char *b_addr;				      \
-	b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3);    \
-	if (__builtin_constant_p(nr)) {				      \
-		switch(nr & 7) {				      \
-			H8300_GEN_BITOP_CONST(OP,0)		      \
-			H8300_GEN_BITOP_CONST(OP,1)		      \
-			H8300_GEN_BITOP_CONST(OP,2)		      \
-			H8300_GEN_BITOP_CONST(OP,3)		      \
-			H8300_GEN_BITOP_CONST(OP,4)		      \
-			H8300_GEN_BITOP_CONST(OP,5)		      \
-			H8300_GEN_BITOP_CONST(OP,6)		      \
-			H8300_GEN_BITOP_CONST(OP,7)		      \
-		}						      \
-	} else {						      \
-		__asm__(OP " %w0,@%1"::"r"(nr),"r"(b_addr):"memory"); \
-	}							      \
-}
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler.
- */
-#define smp_mb__before_clear_bit()	barrier()
-#define smp_mb__after_clear_bit()	barrier()
-
-H8300_GEN_BITOP(set_bit	  ,"bset")
-H8300_GEN_BITOP(clear_bit ,"bclr")
-H8300_GEN_BITOP(change_bit,"bnot")
-#define __set_bit(nr,addr)    set_bit((nr),(addr))
-#define __clear_bit(nr,addr)  clear_bit((nr),(addr))
-#define __change_bit(nr,addr) change_bit((nr),(addr))
-
-#undef H8300_GEN_BITOP
-#undef H8300_GEN_BITOP_CONST
-
-static __inline__ int test_bit(int nr, const unsigned long* addr)
-{
-	return (*((volatile unsigned char *)addr + 
-               ((nr >> 3) ^ 3)) & (1UL << (nr & 7))) != 0;
-}
-
-#define __test_bit(nr, addr) test_bit(nr, addr)
-
-#define H8300_GEN_TEST_BITOP_CONST_INT(OP,BIT)			     \
-	case BIT:						     \
-	__asm__("stc ccr,%w1\n\t"				     \
-		"orc #0x80,ccr\n\t"				     \
-		"bld #" #BIT ",@%4\n\t"				     \
-		OP " #" #BIT ",@%4\n\t"				     \
-		"rotxl.l %0\n\t"				     \
-		"ldc %w1,ccr"					     \
-		: "=r"(retval),"=&r"(ccrsave),"=m"(*b_addr)	     \
-		: "0" (retval),"r" (b_addr)			     \
-		: "memory");                                         \
-        break;
-
-#define H8300_GEN_TEST_BITOP_CONST(OP,BIT)			     \
-	case BIT:						     \
-	__asm__("bld #" #BIT ",@%3\n\t"				     \
-		OP " #" #BIT ",@%3\n\t"				     \
-		"rotxl.l %0\n\t"				     \
-		: "=r"(retval),"=m"(*b_addr)			     \
-		: "0" (retval),"r" (b_addr)			     \
-		: "memory");                                         \
-        break;
-
-#define H8300_GEN_TEST_BITOP(FNNAME,OP)				     \
-static __inline__ int FNNAME(int nr, volatile void * addr)	     \
-{								     \
-	int retval = 0;						     \
-	char ccrsave;						     \
-	volatile unsigned char *b_addr;				     \
-	b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3);   \
-	if (__builtin_constant_p(nr)) {				     \
-		switch(nr & 7) {				     \
-			H8300_GEN_TEST_BITOP_CONST_INT(OP,0)	     \
-			H8300_GEN_TEST_BITOP_CONST_INT(OP,1)	     \
-			H8300_GEN_TEST_BITOP_CONST_INT(OP,2)	     \
-			H8300_GEN_TEST_BITOP_CONST_INT(OP,3)	     \
-			H8300_GEN_TEST_BITOP_CONST_INT(OP,4)	     \
-			H8300_GEN_TEST_BITOP_CONST_INT(OP,5)	     \
-			H8300_GEN_TEST_BITOP_CONST_INT(OP,6)	     \
-			H8300_GEN_TEST_BITOP_CONST_INT(OP,7)	     \
-		}						     \
-	} else {						     \
-		__asm__("stc ccr,%w1\n\t"			     \
-			"orc #0x80,ccr\n\t"			     \
-			"btst %w5,@%4\n\t"			     \
-			OP " %w5,@%4\n\t"			     \
-			"beq 1f\n\t"				     \
-			"inc.l #1,%0\n"				     \
-			"1:\n\t"				     \
-			"ldc %w1,ccr"				     \
-			: "=r"(retval),"=&r"(ccrsave),"=m"(*b_addr)  \
-			: "0" (retval),"r" (b_addr),"r"(nr)	     \
-			: "memory");				     \
-	}							     \
-	return retval;						     \
-}								     \
-								     \
-static __inline__ int __ ## FNNAME(int nr, volatile void * addr)     \
-{								     \
-	int retval = 0;						     \
-	volatile unsigned char *b_addr;				     \
-	b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3);   \
-	if (__builtin_constant_p(nr)) {				     \
-		switch(nr & 7) {				     \
-			H8300_GEN_TEST_BITOP_CONST(OP,0) 	     \
-			H8300_GEN_TEST_BITOP_CONST(OP,1) 	     \
-			H8300_GEN_TEST_BITOP_CONST(OP,2) 	     \
-			H8300_GEN_TEST_BITOP_CONST(OP,3) 	     \
-			H8300_GEN_TEST_BITOP_CONST(OP,4) 	     \
-			H8300_GEN_TEST_BITOP_CONST(OP,5) 	     \
-			H8300_GEN_TEST_BITOP_CONST(OP,6) 	     \
-			H8300_GEN_TEST_BITOP_CONST(OP,7) 	     \
-		}						     \
-	} else {						     \
-		__asm__("btst %w4,@%3\n\t"			     \
-			OP " %w4,@%3\n\t"			     \
-			"beq 1f\n\t"				     \
-			"inc.l #1,%0\n"				     \
-			"1:"					     \
-			: "=r"(retval),"=m"(*b_addr)		     \
-			: "0" (retval),"r" (b_addr),"r"(nr)	     \
-			: "memory");				     \
-	}							     \
-	return retval;						     \
-}
-
-H8300_GEN_TEST_BITOP(test_and_set_bit,	 "bset")
-H8300_GEN_TEST_BITOP(test_and_clear_bit, "bclr")
-H8300_GEN_TEST_BITOP(test_and_change_bit,"bnot")
-#undef H8300_GEN_TEST_BITOP_CONST
-#undef H8300_GEN_TEST_BITOP_CONST_INT
-#undef H8300_GEN_TEST_BITOP
-
-#include <asm-generic/bitops/ffs.h>
-
-static __inline__ unsigned long __ffs(unsigned long word)
-{
-	unsigned long result;
-
-	result = -1;
-	__asm__("1:\n\t"
-		"shlr.l %2\n\t"
-		"adds #1,%0\n\t"
-		"bcc 1b"
-		: "=r" (result)
-		: "0"(result),"r"(word));
-	return result;
-}
-
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-#include <asm-generic/bitops/le.h>
-#include <asm-generic/bitops/ext2-atomic.h>
-
-#endif /* __KERNEL__ */
-
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#endif /* _H8300_BITOPS_H */
diff --git a/arch/h8300/include/asm/bootinfo.h b/arch/h8300/include/asm/bootinfo.h
deleted file mode 100644
index 5bed7e7aac0a..000000000000
--- a/arch/h8300/include/asm/bootinfo.h
+++ /dev/null
@@ -1,2 +0,0 @@
-
-/* Nothing for h8300 */
diff --git a/arch/h8300/include/asm/bug.h b/arch/h8300/include/asm/bug.h
deleted file mode 100644
index 1e1be8119935..000000000000
--- a/arch/h8300/include/asm/bug.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _H8300_BUG_H
-#define _H8300_BUG_H
-
-/* always true */
-#define is_valid_bugaddr(addr) (1)
-
-#include <asm-generic/bug.h>
-
-struct pt_regs;
-extern void die(const char *str, struct pt_regs *fp, unsigned long err);
-
-#endif
diff --git a/arch/h8300/include/asm/bugs.h b/arch/h8300/include/asm/bugs.h
deleted file mode 100644
index 1cb4afba6eb1..000000000000
--- a/arch/h8300/include/asm/bugs.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  include/asm-h8300/bugs.h
- *
- *  Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-static void check_bugs(void)
-{
-}
diff --git a/arch/h8300/include/asm/cache.h b/arch/h8300/include/asm/cache.h
deleted file mode 100644
index 05887a1d80e5..000000000000
--- a/arch/h8300/include/asm/cache.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ARCH_H8300_CACHE_H
-#define __ARCH_H8300_CACHE_H
-
-/* bytes per L1 cache line */
-#define        L1_CACHE_SHIFT  2
-#define        L1_CACHE_BYTES  (1 << L1_CACHE_SHIFT)
-
-/* m68k-elf-gcc  2.95.2 doesn't like these */
-
-#define __cacheline_aligned
-#define ____cacheline_aligned
-
-#endif
diff --git a/arch/h8300/include/asm/cachectl.h b/arch/h8300/include/asm/cachectl.h
deleted file mode 100644
index c464022d8e26..000000000000
--- a/arch/h8300/include/asm/cachectl.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _H8300_CACHECTL_H
-#define _H8300_CACHECTL_H
-
-/* Definitions for the cacheflush system call.  */
-
-#define FLUSH_SCOPE_LINE    0	/* Flush a cache line */
-#define FLUSH_SCOPE_PAGE    0	/* Flush a page */
-#define FLUSH_SCOPE_ALL     0	/* Flush the whole cache -- superuser only */
-
-#define FLUSH_CACHE_DATA    0	/* Writeback and flush data cache */
-#define FLUSH_CACHE_INSN    0	/* Flush instruction cache */
-#define FLUSH_CACHE_BOTH    0	/* Flush both caches */
-
-#endif /* _H8300_CACHECTL_H */
diff --git a/arch/h8300/include/asm/cacheflush.h b/arch/h8300/include/asm/cacheflush.h
deleted file mode 100644
index 4cf2df20c1ce..000000000000
--- a/arch/h8300/include/asm/cacheflush.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * (C) Copyright 2002, Yoshinori Sato <ysato@users.sourceforge.jp>
- */
-
-#ifndef _ASM_H8300_CACHEFLUSH_H
-#define _ASM_H8300_CACHEFLUSH_H
-
-/*
- * Cache handling functions
- * No Cache memory all dummy functions
- */
-
-#define flush_cache_all()
-#define	flush_cache_mm(mm)
-#define	flush_cache_dup_mm(mm)		do { } while (0)
-#define	flush_cache_range(vma,a,b)
-#define	flush_cache_page(vma,p,pfn)
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
-#define	flush_dcache_page(page)
-#define	flush_dcache_mmap_lock(mapping)
-#define	flush_dcache_mmap_unlock(mapping)
-#define	flush_icache()
-#define	flush_icache_page(vma,page)
-#define	flush_icache_range(start,len)
-#define flush_cache_vmap(start, end)
-#define flush_cache_vunmap(start, end)
-#define	cache_push_v(vaddr,len)
-#define	cache_push(paddr,len)
-#define	cache_clear(paddr,len)
-
-#define	flush_dcache_range(a,b)
-
-#define	flush_icache_user_range(vma,page,addr,len)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
-
-#endif /* _ASM_H8300_CACHEFLUSH_H */
diff --git a/arch/h8300/include/asm/checksum.h b/arch/h8300/include/asm/checksum.h
deleted file mode 100644
index 98724e12508c..000000000000
--- a/arch/h8300/include/asm/checksum.h
+++ /dev/null
@@ -1,102 +0,0 @@
-#ifndef _H8300_CHECKSUM_H
-#define _H8300_CHECKSUM_H
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
-
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
-						int len, __wsum sum, int *csum_err);
-
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-
-/*
- *	Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
-	__asm__("mov.l %0,er0\n\t"
-		"add.w e0,r0\n\t"
-		"xor.w e0,e0\n\t"
-		"rotxl.w e0\n\t"
-		"add.w e0,r0\n\t"
-		"sub.w e0,e0\n\t"
-		"mov.l er0,%0"
-		: "=r"(sum)
-		: "0"(sum)
-		: "er0");
-	return (__force __sum16)~sum;
-}
-
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	__asm__ ("sub.l er0,er0\n\t"
-		 "add.l %2,%0\n\t"
-		 "addx	#0,r0l\n\t"
-		 "add.l	%3,%0\n\t"
-		 "addx	#0,r0l\n\t"
-		 "add.l %4,%0\n\t"
-		 "addx	#0,r0l\n\t"
-		 "add.l	er0,%0\n\t"
-		 "bcc	1f\n\t"
-		 "inc.l	#1,%0\n"
-		 "1:"
-		 : "=&r" (sum)
-		 : "0" (sum), "r" (daddr), "r" (saddr), "r" (len + proto)
-		 :"er0");
-	return sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-#endif /* _H8300_CHECKSUM_H */
diff --git a/arch/h8300/include/asm/cmpxchg.h b/arch/h8300/include/asm/cmpxchg.h
deleted file mode 100644
index cdb203ef681f..000000000000
--- a/arch/h8300/include/asm/cmpxchg.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef __ARCH_H8300_CMPXCHG__
-#define __ARCH_H8300_CMPXCHG__
-
-#include <linux/irqflags.h>
-
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-struct __xchg_dummy { unsigned long a[100]; };
-#define __xg(x) ((volatile struct __xchg_dummy *)(x))
-
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-{
-  unsigned long tmp, flags;
-
-  local_irq_save(flags);
-
-  switch (size) {
-  case 1:
-    __asm__ __volatile__
-    ("mov.b %2,%0\n\t"
-     "mov.b %1,%2"
-    : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory");
-    break;
-  case 2:
-    __asm__ __volatile__
-    ("mov.w %2,%0\n\t"
-     "mov.w %1,%2"
-    : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory");
-    break;
-  case 4:
-    __asm__ __volatile__
-    ("mov.l %2,%0\n\t"
-     "mov.l %1,%2"
-    : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory");
-    break;
-  default:
-    tmp = 0;	  
-  }
-  local_irq_restore(flags);
-  return tmp;
-}
-
-#include <asm-generic/cmpxchg-local.h>
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n)				  	       \
-	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
-			(unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#ifndef CONFIG_SMP
-#include <asm-generic/cmpxchg.h>
-#endif
-
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-#endif /* __ARCH_H8300_CMPXCHG__ */
diff --git a/arch/h8300/include/asm/cputime.h b/arch/h8300/include/asm/cputime.h
deleted file mode 100644
index 092e187c7b08..000000000000
--- a/arch/h8300/include/asm/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __H8300_CPUTIME_H
-#define __H8300_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __H8300_CPUTIME_H */
diff --git a/arch/h8300/include/asm/current.h b/arch/h8300/include/asm/current.h
deleted file mode 100644
index 57d74ee55a14..000000000000
--- a/arch/h8300/include/asm/current.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _H8300_CURRENT_H
-#define _H8300_CURRENT_H
-/*
- *	current.h
- *	(C) Copyright 2000, Lineo, David McCullough <davidm@lineo.com>
- *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- *
- *	rather than dedicate a register (as the m68k source does), we
- *	just keep a global,  we should probably just change it all to be
- *	current and lose _current_task.
- */
-
-#include <linux/thread_info.h>
-#include <asm/thread_info.h>
-
-struct task_struct;
-
-static inline struct task_struct *get_current(void)
-{
-	return(current_thread_info()->task);
-}
-
-#define	current	get_current()
-
-#endif /* _H8300_CURRENT_H */
diff --git a/arch/h8300/include/asm/dbg.h b/arch/h8300/include/asm/dbg.h
deleted file mode 100644
index 2c6d1cbcf736..000000000000
--- a/arch/h8300/include/asm/dbg.h
+++ /dev/null
@@ -1,2 +0,0 @@
-#define DEBUG 1
-#define	BREAK asm volatile ("trap #3")
diff --git a/arch/h8300/include/asm/delay.h b/arch/h8300/include/asm/delay.h
deleted file mode 100644
index 743beba70f82..000000000000
--- a/arch/h8300/include/asm/delay.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef _H8300_DELAY_H
-#define _H8300_DELAY_H
-
-#include <asm/param.h>
-
-/*
- * Copyright (C) 2002 Yoshinori Sato <ysato@sourceforge.jp>
- *
- * Delay routines, using a pre-computed "loops_per_second" value.
- */
-
-static inline void __delay(unsigned long loops)
-{
-	__asm__ __volatile__ ("1:\n\t"
-			      "dec.l #1,%0\n\t"
-			      "bne 1b"
-			      :"=r" (loops):"0"(loops));
-}
-
-/*
- * Use only for very small delays ( < 1 msec).  Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays.  This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)  
- */
-
-extern unsigned long loops_per_jiffy;
-
-static inline void udelay(unsigned long usecs)
-{
-	usecs *= 4295;		/* 2**32 / 1000000 */
-	usecs /= (loops_per_jiffy*HZ);
-	if (usecs)
-		__delay(usecs);
-}
-
-#endif /* _H8300_DELAY_H */
diff --git a/arch/h8300/include/asm/device.h b/arch/h8300/include/asm/device.h
deleted file mode 100644
index d8f9872b0e2d..000000000000
--- a/arch/h8300/include/asm/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/arch/h8300/include/asm/div64.h b/arch/h8300/include/asm/div64.h
deleted file mode 100644
index 6cd978cefb28..000000000000
--- a/arch/h8300/include/asm/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/arch/h8300/include/asm/dma.h b/arch/h8300/include/asm/dma.h
deleted file mode 100644
index 3edbaaaedf5b..000000000000
--- a/arch/h8300/include/asm/dma.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _H8300_DMA_H
-#define _H8300_DMA_H 
- 
-
-/*
- * Set number of channels of DMA on ColdFire for different implementations.
- */
-#define MAX_DMA_CHANNELS 0
-#define MAX_DMA_ADDRESS PAGE_OFFSET
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char *device_id);	/* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr);	/* release it again */
- 
-#endif /* _H8300_DMA_H */
diff --git a/arch/h8300/include/asm/elf.h b/arch/h8300/include/asm/elf.h
deleted file mode 100644
index 6db71248a82f..000000000000
--- a/arch/h8300/include/asm/elf.h
+++ /dev/null
@@ -1,101 +0,0 @@
-#ifndef __ASMH8300_ELF_H
-#define __ASMH8300_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-typedef unsigned long elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_H8_300)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#define ELF_DATA	ELFDATA2MSB
-#define ELF_ARCH	EM_H8_300
-#if defined(__H8300H__)
-#define ELF_CORE_EFLAGS 0x810000
-#endif
-#if defined(__H8300S__)
-#define ELF_CORE_EFLAGS 0x820000
-#endif
-
-#define ELF_PLAT_INIT(_r)	_r->er1 = 0
-
-#define ELF_EXEC_PAGESIZE	4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE         0xD0000000UL
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this cpu supports.  */
-
-#define ELF_HWCAP	(0)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.  */
-
-#define ELF_PLATFORM  (NULL)
-
-#define R_H8_NONE       0
-#define R_H8_DIR32      1
-#define R_H8_DIR32_28   2
-#define R_H8_DIR32_24   3
-#define R_H8_DIR32_16   4
-#define R_H8_DIR32U     6
-#define R_H8_DIR32U_28  7
-#define R_H8_DIR32U_24  8
-#define R_H8_DIR32U_20  9
-#define R_H8_DIR32U_16 10
-#define R_H8_DIR24     11
-#define R_H8_DIR24_20  12
-#define R_H8_DIR24_16  13
-#define R_H8_DIR24U    14
-#define R_H8_DIR24U_20 15
-#define R_H8_DIR24U_16 16
-#define R_H8_DIR16     17
-#define R_H8_DIR16U    18
-#define R_H8_DIR16S_32 19
-#define R_H8_DIR16S_28 20
-#define R_H8_DIR16S_24 21
-#define R_H8_DIR16S_20 22
-#define R_H8_DIR16S    23
-#define R_H8_DIR8      24
-#define R_H8_DIR8U     25
-#define R_H8_DIR8Z_32  26
-#define R_H8_DIR8Z_28  27
-#define R_H8_DIR8Z_24  28
-#define R_H8_DIR8Z_20  29
-#define R_H8_DIR8Z_16  30
-#define R_H8_PCREL16   31
-#define R_H8_PCREL8    32
-#define R_H8_BPOS      33
-#define R_H8_PCREL32   34
-#define R_H8_GOT32O    35
-#define R_H8_GOT16O    36
-#define R_H8_DIR16A8   59
-#define R_H8_DIR16R8   60
-#define R_H8_DIR24A8   61
-#define R_H8_DIR24R8   62
-#define R_H8_DIR32A16  63
-#define R_H8_ABS32     65
-#define R_H8_ABS32A16 127
-
-#endif
diff --git a/arch/h8300/include/asm/emergency-restart.h b/arch/h8300/include/asm/emergency-restart.h
deleted file mode 100644
index 108d8c48e42e..000000000000
--- a/arch/h8300/include/asm/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/h8300/include/asm/fb.h b/arch/h8300/include/asm/fb.h
deleted file mode 100644
index c7df38030992..000000000000
--- a/arch/h8300/include/asm/fb.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-#include <linux/fb.h>
-
-#define fb_pgprotect(...) do {} while (0)
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/arch/h8300/include/asm/flat.h b/arch/h8300/include/asm/flat.h
deleted file mode 100644
index bd12b31b90e6..000000000000
--- a/arch/h8300/include/asm/flat.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-h8300/flat.h -- uClinux flat-format executables
- */
-
-#ifndef __H8300_FLAT_H__
-#define __H8300_FLAT_H__
-
-#define	flat_argvp_envp_on_stack()		1
-#define	flat_old_ram_flag(flags)		1
-#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
-#define	flat_set_persistent(relval, p)		0
-
-/*
- * on the H8 a couple of the relocations have an instruction in the
- * top byte.  As there can only be 24bits of address space,  we just
- * always preserve that 8bits at the top,  when it isn't an instruction
- * is is 0 (davidm@snapgear.com)
- */
-
-#define	flat_get_relocate_addr(rel)		(rel)
-#define flat_get_addr_from_rp(rp, relval, flags, persistent) \
-        (get_unaligned(rp) & ((flags & FLAT_FLAG_GOTPIC) ? 0xffffffff: 0x00ffffff))
-#define flat_put_addr_at_rp(rp, addr, rel) \
-	put_unaligned (((*(char *)(rp)) << 24) | ((addr) & 0x00ffffff), rp)
-
-#endif /* __H8300_FLAT_H__ */
diff --git a/arch/h8300/include/asm/fpu.h b/arch/h8300/include/asm/fpu.h
deleted file mode 100644
index 4fc416e80bef..000000000000
--- a/arch/h8300/include/asm/fpu.h
+++ /dev/null
@@ -1 +0,0 @@
-/* Nothing do */
diff --git a/arch/h8300/include/asm/ftrace.h b/arch/h8300/include/asm/ftrace.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/h8300/include/asm/ftrace.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/h8300/include/asm/futex.h b/arch/h8300/include/asm/futex.h
deleted file mode 100644
index 6a332a9f099c..000000000000
--- a/arch/h8300/include/asm/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
diff --git a/arch/h8300/include/asm/gpio-internal.h b/arch/h8300/include/asm/gpio-internal.h
deleted file mode 100644
index a714f0c0efbc..000000000000
--- a/arch/h8300/include/asm/gpio-internal.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef _H8300_GPIO_H
-#define _H8300_GPIO_H
-
-#define H8300_GPIO_P1 0
-#define H8300_GPIO_P2 1
-#define H8300_GPIO_P3 2
-#define H8300_GPIO_P4 3
-#define H8300_GPIO_P5 4
-#define H8300_GPIO_P6 5
-#define H8300_GPIO_P7 6
-#define H8300_GPIO_P8 7
-#define H8300_GPIO_P9 8
-#define H8300_GPIO_PA 9
-#define H8300_GPIO_PB 10
-#define H8300_GPIO_PC 11
-#define H8300_GPIO_PD 12
-#define H8300_GPIO_PE 13
-#define H8300_GPIO_PF 14
-#define H8300_GPIO_PG 15
-#define H8300_GPIO_PH 16
-
-#define H8300_GPIO_B7 0x80
-#define H8300_GPIO_B6 0x40
-#define H8300_GPIO_B5 0x20
-#define H8300_GPIO_B4 0x10
-#define H8300_GPIO_B3 0x08
-#define H8300_GPIO_B2 0x04
-#define H8300_GPIO_B1 0x02
-#define H8300_GPIO_B0 0x01
-
-#define H8300_GPIO_INPUT 0
-#define H8300_GPIO_OUTPUT 1
-
-#define H8300_GPIO_RESERVE(port, bits) \
-        h8300_reserved_gpio(port, bits)
-
-#define H8300_GPIO_FREE(port, bits) \
-        h8300_free_gpio(port, bits)
-
-#define H8300_GPIO_DDR(port, bit, dir) \
-        h8300_set_gpio_dir(((port) << 8) | (bit), dir)
-
-#define H8300_GPIO_GETDIR(port, bit) \
-        h8300_get_gpio_dir(((port) << 8) | (bit))
-
-extern int h8300_reserved_gpio(int port, int bits);
-extern int h8300_free_gpio(int port, int bits);
-extern int h8300_set_gpio_dir(int port_bit, int dir);
-extern int h8300_get_gpio_dir(int port_bit);
-extern int h8300_init_gpio(void);
-
-#endif
diff --git a/arch/h8300/include/asm/hardirq.h b/arch/h8300/include/asm/hardirq.h
deleted file mode 100644
index c2e1aa0f0d14..000000000000
--- a/arch/h8300/include/asm/hardirq.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __H8300_HARDIRQ_H
-#define __H8300_HARDIRQ_H
-
-#include <asm/irq.h>
-
-#define HARDIRQ_BITS	8
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-#include <asm-generic/hardirq.h>
-
-#endif
diff --git a/arch/h8300/include/asm/hw_irq.h b/arch/h8300/include/asm/hw_irq.h
deleted file mode 100644
index d75a5a1119e8..000000000000
--- a/arch/h8300/include/asm/hw_irq.h
+++ /dev/null
@@ -1 +0,0 @@
-/* Do Nothing */
diff --git a/arch/h8300/include/asm/io.h b/arch/h8300/include/asm/io.h
deleted file mode 100644
index c1a8df22080f..000000000000
--- a/arch/h8300/include/asm/io.h
+++ /dev/null
@@ -1,358 +0,0 @@
-#ifndef _H8300_IO_H
-#define _H8300_IO_H
-
-#ifdef __KERNEL__
-
-#include <asm/virtconvert.h>
-
-#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
-#include <asm/regs306x.h>
-#elif defined(CONFIG_H8S2678)
-#include <asm/regs267x.h>
-#else
-#error UNKNOWN CPU TYPE
-#endif
-
-
-/*
- * These are for ISA/PCI shared memory _only_ and should never be used
- * on any other type of memory, including Zorro memory. They are meant to
- * access the bus in the bus byte order which is little-endian!.
- *
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the m68k architecture, we just read/write the
- * memory location directly.
- */
-/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesirable for some devices.
- */
-
-/*
- * swap functions are sometimes needed to interface little-endian hardware
- */
-
-static inline unsigned short _swapw(volatile unsigned short v)
-{
-#ifndef H8300_IO_NOSWAP
-	unsigned short r;
-	__asm__("xor.b %w0,%x0\n\t"
-		"xor.b %x0,%w0\n\t"
-		"xor.b %w0,%x0"
-		:"=r"(r)
-		:"0"(v));
-	return r;
-#else
-	return v;
-#endif
-}
-
-static inline unsigned long _swapl(volatile unsigned long v)
-{
-#ifndef H8300_IO_NOSWAP
-	unsigned long r;
-	__asm__("xor.b %w0,%x0\n\t"
-		"xor.b %x0,%w0\n\t"
-		"xor.b %w0,%x0\n\t"
-		"xor.w %e0,%f0\n\t"
-		"xor.w %f0,%e0\n\t"
-		"xor.w %e0,%f0\n\t"
-		"xor.b %w0,%x0\n\t"
-		"xor.b %x0,%w0\n\t"
-		"xor.b %w0,%x0"
-		:"=r"(r)
-		:"0"(v));
-	return r;
-#else
-	return v;
-#endif
-}
-
-#define readb(addr) \
-    ({ unsigned char __v = \
-     *(volatile unsigned char *)((unsigned long)(addr) & 0x00ffffff); \
-     __v; })
-#define readw(addr) \
-    ({ unsigned short __v = \
-     *(volatile unsigned short *)((unsigned long)(addr) & 0x00ffffff); \
-     __v; })
-#define readl(addr) \
-    ({ unsigned long __v = \
-     *(volatile unsigned long *)((unsigned long)(addr) & 0x00ffffff); \
-     __v; })
-
-#define writeb(b,addr) (void)((*(volatile unsigned char *) \
-                             ((unsigned long)(addr) & 0x00ffffff)) = (b))
-#define writew(b,addr) (void)((*(volatile unsigned short *) \
-                             ((unsigned long)(addr) & 0x00ffffff)) = (b))
-#define writel(b,addr) (void)((*(volatile unsigned long *) \
-                             ((unsigned long)(addr) & 0x00ffffff)) = (b))
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-
-static inline int h8300_buswidth(unsigned int addr)
-{
-	return (*(volatile unsigned char *)ABWCR & (1 << ((addr >> 21) & 7))) == 0;
-}
-
-static inline void io_outsb(unsigned int addr, const void *buf, int len)
-{
-	volatile unsigned char  *ap_b = (volatile unsigned char *) addr;
-	volatile unsigned short *ap_w = (volatile unsigned short *) addr;
-	unsigned char *bp = (unsigned char *) buf;
-
-	if(h8300_buswidth(addr) && (addr & 1)) {
-		while (len--)
-			*ap_w = *bp++;
-	} else {
-		while (len--)
-			*ap_b = *bp++;
-	}
-}
-
-static inline void io_outsw(unsigned int addr, const void *buf, int len)
-{
-	volatile unsigned short *ap = (volatile unsigned short *) addr;
-	unsigned short *bp = (unsigned short *) buf;
-	while (len--)
-		*ap = _swapw(*bp++);
-}
-
-static inline void io_outsl(unsigned int addr, const void *buf, int len)
-{
-	volatile unsigned long *ap = (volatile unsigned long *) addr;
-	unsigned long *bp = (unsigned long *) buf;
-	while (len--)
-		*ap = _swapl(*bp++);
-}
-
-static inline void io_outsw_noswap(unsigned int addr, const void *buf, int len)
-{
-	volatile unsigned short *ap = (volatile unsigned short *) addr;
-	unsigned short *bp = (unsigned short *) buf;
-	while (len--)
-		*ap = *bp++;
-}
-
-static inline void io_outsl_noswap(unsigned int addr, const void *buf, int len)
-{
-	volatile unsigned long *ap = (volatile unsigned long *) addr;
-	unsigned long *bp = (unsigned long *) buf;
-	while (len--)
-		*ap = *bp++;
-}
-
-static inline void io_insb(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned char  *ap_b;
-	volatile unsigned short *ap_w;
-	unsigned char *bp = (unsigned char *) buf;
-
-	if(h8300_buswidth(addr)) {
-		ap_w = (volatile unsigned short *)(addr & ~1);
-		while (len--)
-			*bp++ = *ap_w & 0xff;
-	} else {
-		ap_b = (volatile unsigned char *)addr;
-		while (len--)
-			*bp++ = *ap_b;
-	}
-}
-
-static inline void io_insw(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned short *ap = (volatile unsigned short *) addr;
-	unsigned short *bp = (unsigned short *) buf;
-	while (len--)
-		*bp++ = _swapw(*ap);
-}
-
-static inline void io_insl(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned long *ap = (volatile unsigned long *) addr;
-	unsigned long *bp = (unsigned long *) buf;
-	while (len--)
-		*bp++ = _swapl(*ap);
-}
-
-static inline void io_insw_noswap(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned short *ap = (volatile unsigned short *) addr;
-	unsigned short *bp = (unsigned short *) buf;
-	while (len--)
-		*bp++ = *ap;
-}
-
-static inline void io_insl_noswap(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned long *ap = (volatile unsigned long *) addr;
-	unsigned long *bp = (unsigned long *) buf;
-	while (len--)
-		*bp++ = *ap;
-}
-
-/*
- *	make the short names macros so specific devices
- *	can override them as required
- */
-
-#define memset_io(a,b,c)	memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
-
-#define mmiowb()
-
-#define inb(addr)    ((h8300_buswidth(addr))?readw((addr) & ~1) & 0xff:readb(addr))
-#define inw(addr)    _swapw(readw(addr))
-#define inl(addr)    _swapl(readl(addr))
-#define outb(x,addr) ((void)((h8300_buswidth(addr) && \
-                      ((addr) & 1))?writew(x,(addr) & ~1):writeb(x,addr)))
-#define outw(x,addr) ((void) writew(_swapw(x),addr))
-#define outl(x,addr) ((void) writel(_swapl(x),addr))
-
-#define inb_p(addr)    inb(addr)
-#define inw_p(addr)    inw(addr)
-#define inl_p(addr)    inl(addr)
-#define outb_p(x,addr) outb(x,addr)
-#define outw_p(x,addr) outw(x,addr)
-#define outl_p(x,addr) outl(x,addr)
-
-#define outsb(a,b,l) io_outsb(a,b,l)
-#define outsw(a,b,l) io_outsw(a,b,l)
-#define outsl(a,b,l) io_outsl(a,b,l)
-
-#define insb(a,b,l) io_insb(a,b,l)
-#define insw(a,b,l) io_insw(a,b,l)
-#define insl(a,b,l) io_insl(a,b,l)
-
-#define IO_SPACE_LIMIT 0xffffff
-
-
-/* Values for nocacheflag and cmode */
-#define IOMAP_FULL_CACHING		0
-#define IOMAP_NOCACHE_SER		1
-#define IOMAP_NOCACHE_NONSER		2
-#define IOMAP_WRITETHROUGH		3
-
-extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
-extern void __iounmap(void *addr, unsigned long size);
-
-static inline void *ioremap(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-}
-static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
-}
-
-extern void iounmap(void *addr);
-
-/* H8/300 internal I/O functions */
-static __inline__ unsigned char ctrl_inb(unsigned long addr)
-{
-	return *(volatile unsigned char*)addr;
-}
-
-static __inline__ unsigned short ctrl_inw(unsigned long addr)
-{
-	return *(volatile unsigned short*)addr;
-}
-
-static __inline__ unsigned long ctrl_inl(unsigned long addr)
-{
-	return *(volatile unsigned long*)addr;
-}
-
-static __inline__ void ctrl_outb(unsigned char b, unsigned long addr)
-{
-	*(volatile unsigned char*)addr = b;
-}
-
-static __inline__ void ctrl_outw(unsigned short b, unsigned long addr)
-{
-	*(volatile unsigned short*)addr = b;
-}
-
-static __inline__ void ctrl_outl(unsigned long b, unsigned long addr)
-{
-        *(volatile unsigned long*)addr = b;
-}
-
-static __inline__ void ctrl_bclr(int b, unsigned long addr)
-{
-	if (__builtin_constant_p(b))
-		switch (b) {
-		case 0: __asm__("bclr #0,@%0"::"r"(addr)); break;
-		case 1: __asm__("bclr #1,@%0"::"r"(addr)); break;
-		case 2: __asm__("bclr #2,@%0"::"r"(addr)); break;
-		case 3: __asm__("bclr #3,@%0"::"r"(addr)); break;
-		case 4: __asm__("bclr #4,@%0"::"r"(addr)); break;
-		case 5: __asm__("bclr #5,@%0"::"r"(addr)); break;
-		case 6: __asm__("bclr #6,@%0"::"r"(addr)); break;
-		case 7: __asm__("bclr #7,@%0"::"r"(addr)); break;
-		}
-	else
-		__asm__("bclr %w0,@%1"::"r"(b), "r"(addr));
-}
-
-static __inline__ void ctrl_bset(int b, unsigned long addr)
-{
-	if (__builtin_constant_p(b))
-		switch (b) {
-		case 0: __asm__("bset #0,@%0"::"r"(addr)); break;
-		case 1: __asm__("bset #1,@%0"::"r"(addr)); break;
-		case 2: __asm__("bset #2,@%0"::"r"(addr)); break;
-		case 3: __asm__("bset #3,@%0"::"r"(addr)); break;
-		case 4: __asm__("bset #4,@%0"::"r"(addr)); break;
-		case 5: __asm__("bset #5,@%0"::"r"(addr)); break;
-		case 6: __asm__("bset #6,@%0"::"r"(addr)); break;
-		case 7: __asm__("bset #7,@%0"::"r"(addr)); break;
-		}
-	else
-		__asm__("bset %w0,@%1"::"r"(b), "r"(addr));
-}
-
-/* Pages to physical address... */
-#define page_to_phys(page)      ((page - mem_map) << PAGE_SHIFT)
-#define page_to_bus(page)       ((page - mem_map) << PAGE_SHIFT)
-
-/*
- * Macros used for converting between virtual and physical mappings.
- */
-#define phys_to_virt(vaddr)	((void *) (vaddr))
-#define virt_to_phys(vaddr)	((unsigned long) (vaddr))
-
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-#endif /* __KERNEL__ */
-
-#endif /* _H8300_IO_H */
diff --git a/arch/h8300/include/asm/irq.h b/arch/h8300/include/asm/irq.h
deleted file mode 100644
index 13d7c601cd0a..000000000000
--- a/arch/h8300/include/asm/irq.h
+++ /dev/null
@@ -1,49 +0,0 @@
-#ifndef _H8300_IRQ_H_
-#define _H8300_IRQ_H_
-
-#include <asm/ptrace.h>
-
-#if defined(CONFIG_CPU_H8300H)
-#define NR_IRQS 64
-#define EXT_IRQ0 12
-#define EXT_IRQ1 13
-#define EXT_IRQ2 14
-#define EXT_IRQ3 15
-#define EXT_IRQ4 16
-#define EXT_IRQ5 17
-#define EXT_IRQ6 18
-#define EXT_IRQ7 19
-#define EXT_IRQS 5
-#define IER_REGS *(volatile unsigned char *)IER
-#endif
-#if defined(CONFIG_CPU_H8S)
-#define NR_IRQS 128
-#define EXT_IRQ0 16
-#define EXT_IRQ1 17
-#define EXT_IRQ2 18
-#define EXT_IRQ3 19
-#define EXT_IRQ4 20
-#define EXT_IRQ5 21
-#define EXT_IRQ6 22
-#define EXT_IRQ7 23
-#define EXT_IRQ8 24
-#define EXT_IRQ9 25
-#define EXT_IRQ10 26
-#define EXT_IRQ11 27
-#define EXT_IRQ12 28
-#define EXT_IRQ13 29
-#define EXT_IRQ14 30
-#define EXT_IRQ15 31
-#define EXT_IRQS 15
-
-#define IER_REGS *(volatile unsigned short *)IER
-#endif
-
-static __inline__ int irq_canonicalize(int irq)
-{
-	return irq;
-}
-
-typedef void (*h8300_vector)(void);
-
-#endif /* _H8300_IRQ_H_ */
diff --git a/arch/h8300/include/asm/irq_regs.h b/arch/h8300/include/asm/irq_regs.h
deleted file mode 100644
index 3dd9c0b70270..000000000000
--- a/arch/h8300/include/asm/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/arch/h8300/include/asm/irqflags.h b/arch/h8300/include/asm/irqflags.h
deleted file mode 100644
index 9617cd57aebd..000000000000
--- a/arch/h8300/include/asm/irqflags.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef _H8300_IRQFLAGS_H
-#define _H8300_IRQFLAGS_H
-
-static inline unsigned long arch_local_save_flags(void)
-{
-	unsigned long flags;
-	asm volatile ("stc ccr,%w0" : "=r" (flags));
-	return flags;
-}
-
-static inline void arch_local_irq_disable(void)
-{
-	asm volatile ("orc  #0x80,ccr" : : : "memory");
-}
-
-static inline void arch_local_irq_enable(void)
-{
-	asm volatile ("andc #0x7f,ccr" : : : "memory");
-}
-
-static inline unsigned long arch_local_irq_save(void)
-{
-	unsigned long flags = arch_local_save_flags();
-	arch_local_irq_disable();
-	return flags;
-}
-
-static inline void arch_local_irq_restore(unsigned long flags)
-{
-	asm volatile ("ldc %w0,ccr" : : "r" (flags) : "memory");
-}
-
-static inline bool arch_irqs_disabled_flags(unsigned long flags)
-{
-	return (flags & 0x80) == 0x80;
-}
-
-static inline bool arch_irqs_disabled(void)
-{
-	return arch_irqs_disabled_flags(arch_local_save_flags());
-}
-
-#endif /* _H8300_IRQFLAGS_H */
diff --git a/arch/h8300/include/asm/kdebug.h b/arch/h8300/include/asm/kdebug.h
deleted file mode 100644
index 6ece1b037665..000000000000
--- a/arch/h8300/include/asm/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/arch/h8300/include/asm/kmap_types.h b/arch/h8300/include/asm/kmap_types.h
deleted file mode 100644
index be12a7160116..000000000000
--- a/arch/h8300/include/asm/kmap_types.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_H8300_KMAP_TYPES_H
-#define _ASM_H8300_KMAP_TYPES_H
-
-#include <asm-generic/kmap_types.h>
-
-#endif
diff --git a/arch/h8300/include/asm/local.h b/arch/h8300/include/asm/local.h
deleted file mode 100644
index fdd4efe437cd..000000000000
--- a/arch/h8300/include/asm/local.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _H8300_LOCAL_H_
-#define _H8300_LOCAL_H_
-
-#include <asm-generic/local.h>
-
-#endif
diff --git a/arch/h8300/include/asm/local64.h b/arch/h8300/include/asm/local64.h
deleted file mode 100644
index 36c93b5cc239..000000000000
--- a/arch/h8300/include/asm/local64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local64.h>
diff --git a/arch/h8300/include/asm/mc146818rtc.h b/arch/h8300/include/asm/mc146818rtc.h
deleted file mode 100644
index ab9d9646d241..000000000000
--- a/arch/h8300/include/asm/mc146818rtc.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _H8300_MC146818RTC_H
-#define _H8300_MC146818RTC_H
-
-/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
-
-#endif /* _H8300_MC146818RTC_H */
diff --git a/arch/h8300/include/asm/mmu_context.h b/arch/h8300/include/asm/mmu_context.h
deleted file mode 100644
index f44b730da54d..000000000000
--- a/arch/h8300/include/asm/mmu_context.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef __H8300_MMU_CONTEXT_H
-#define __H8300_MMU_CONTEXT_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm-generic/mm_hooks.h>
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-static inline int
-init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
-	// mm->context = virt_to_phys(mm->pgd);
-	return(0);
-}
-
-#define destroy_context(mm)		do { } while(0)
-#define deactivate_mm(tsk,mm)           do { } while(0)
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
-{
-}
-
-static inline void activate_mm(struct mm_struct *prev_mm,
-			       struct mm_struct *next_mm)
-{
-}
-
-#endif
diff --git a/arch/h8300/include/asm/mutex.h b/arch/h8300/include/asm/mutex.h
deleted file mode 100644
index 458c1f7fbc18..000000000000
--- a/arch/h8300/include/asm/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/arch/h8300/include/asm/page.h b/arch/h8300/include/asm/page.h
deleted file mode 100644
index 837381a2df46..000000000000
--- a/arch/h8300/include/asm/page.h
+++ /dev/null
@@ -1,78 +0,0 @@
-#ifndef _H8300_PAGE_H
-#define _H8300_PAGE_H
-
-/* PAGE_SHIFT determines the page size */
-
-#define PAGE_SHIFT	(12)
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
-#define PAGE_MASK	(~(PAGE_SIZE-1))
-
-#include <asm/setup.h>
-
-#ifndef __ASSEMBLY__
- 
-#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr)	free_page(addr)
-
-#define clear_page(page)	memset((page), 0, PAGE_SIZE)
-#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
-
-#define clear_user_page(page, vaddr, pg)	clear_page(page)
-#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
-
-#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
-	alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
-#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd[16]; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct page *pgtable_t;
-
-#define pte_val(x)	((x).pte)
-#define pmd_val(x)	((&x)->pmd[0])
-#define pgd_val(x)	((x).pgd)
-#define pgprot_val(x)	((x).pgprot)
-
-#define __pte(x)	((pte_t) { (x) } )
-#define __pmd(x)	((pmd_t) { (x) } )
-#define __pgd(x)	((pgd_t) { (x) } )
-#define __pgprot(x)	((pgprot_t) { (x) } )
-
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
-#endif /* !__ASSEMBLY__ */
-
-#include <asm/page_offset.h>
-
-#define PAGE_OFFSET		(PAGE_OFFSET_RAW)
-
-#ifndef __ASSEMBLY__
-
-#define __pa(vaddr)		virt_to_phys(vaddr)
-#define __va(paddr)		phys_to_virt((unsigned long)paddr)
-
-#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
-
-#define MAP_NR(addr)		(((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
-#define virt_to_page(addr)	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
-#define page_to_virt(page)	((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
-#define pfn_valid(page)	        (page < max_mapnr)
-
-#define ARCH_PFN_OFFSET		(PAGE_OFFSET >> PAGE_SHIFT)
-
-#define	virt_addr_valid(kaddr)	(((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
-				((void *)(kaddr) < (void *)memory_end))
-
-#endif /* __ASSEMBLY__ */
-
-#include <asm-generic/memory_model.h>
-#include <asm-generic/getorder.h>
-
-#endif /* _H8300_PAGE_H */
diff --git a/arch/h8300/include/asm/page_offset.h b/arch/h8300/include/asm/page_offset.h
deleted file mode 100644
index f8706463008c..000000000000
--- a/arch/h8300/include/asm/page_offset.h
+++ /dev/null
@@ -1,3 +0,0 @@
-
-#define PAGE_OFFSET_RAW		0x00000000
-
diff --git a/arch/h8300/include/asm/param.h b/arch/h8300/include/asm/param.h
deleted file mode 100644
index c3909e7ff178..000000000000
--- a/arch/h8300/include/asm/param.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _H8300_PARAM_H
-#define _H8300_PARAM_H
-
-#include <uapi/asm/param.h>
-
-#define HZ		CONFIG_HZ
-#define	USER_HZ		HZ
-#define	CLOCKS_PER_SEC	(USER_HZ)
-#endif /* _H8300_PARAM_H */
diff --git a/arch/h8300/include/asm/pci.h b/arch/h8300/include/asm/pci.h
deleted file mode 100644
index 0b2acaa3dd84..000000000000
--- a/arch/h8300/include/asm/pci.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ASM_H8300_PCI_H
-#define _ASM_H8300_PCI_H
-
-/*
- * asm-h8300/pci.h - H8/300 specific PCI declarations.
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- */
-
-#define pcibios_assign_all_busses()	0
-
-static inline void pcibios_penalize_isa_irq(int irq, int active)
-{
-	/* We don't do dynamic PCI IRQ allocation */
-}
-
-#define PCI_DMA_BUS_IS_PHYS	(1)
-
-#endif /* _ASM_H8300_PCI_H */
diff --git a/arch/h8300/include/asm/percpu.h b/arch/h8300/include/asm/percpu.h
deleted file mode 100644
index 72c03e3666d8..000000000000
--- a/arch/h8300/include/asm/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ARCH_H8300_PERCPU__
-#define __ARCH_H8300_PERCPU__
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_H8300_PERCPU__ */
diff --git a/arch/h8300/include/asm/pgalloc.h b/arch/h8300/include/asm/pgalloc.h
deleted file mode 100644
index c2e89a286d23..000000000000
--- a/arch/h8300/include/asm/pgalloc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _H8300_PGALLOC_H
-#define _H8300_PGALLOC_H
-
-#include <asm/setup.h>
-
-#define check_pgt_cache()	do { } while (0)
-
-#endif /* _H8300_PGALLOC_H */
diff --git a/arch/h8300/include/asm/pgtable.h b/arch/h8300/include/asm/pgtable.h
deleted file mode 100644
index 7ca20f894dd7..000000000000
--- a/arch/h8300/include/asm/pgtable.h
+++ /dev/null
@@ -1,73 +0,0 @@
-#ifndef _H8300_PGTABLE_H
-#define _H8300_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-
-#include <linux/slab.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/io.h>
-
-#define pgd_present(pgd)     (1)       /* pages are always present on NO_MM */
-#define pgd_none(pgd)		(0)
-#define pgd_bad(pgd)		(0)
-#define pgd_clear(pgdp)
-#define kern_addr_valid(addr)	(1)
-#define	pmd_offset(a, b)	((void *)0)
-#define pmd_none(pmd)           (1)
-#define pgd_offset_k(adrdress)  ((pgd_t *)0)
-#define pte_offset_kernel(dir, address) ((pte_t *)0)
-
-#define PAGE_NONE		__pgprot(0)    /* these mean nothing to NO_MM */
-#define PAGE_SHARED		__pgprot(0)    /* these mean nothing to NO_MM */
-#define PAGE_COPY		__pgprot(0)    /* these mean nothing to NO_MM */
-#define PAGE_READONLY	__pgprot(0)    /* these mean nothing to NO_MM */
-#define PAGE_KERNEL		__pgprot(0)    /* these mean nothing to NO_MM */
-
-extern void paging_init(void);
-#define swapper_pg_dir ((pgd_t *) 0)
-
-#define __swp_type(x)		(0)
-#define __swp_offset(x)		(0)
-#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-
-static inline int pte_file(pte_t pte) { return 0; }
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
-
-/*
- * These would be in other places but having them here reduces the diffs.
- */
-extern unsigned int kobjsize(const void *objp);
-extern int is_in_rom(unsigned long);
-
-/*
- * No page table caches to initialise
- */
-#define pgtable_cache_init()   do { } while (0)
-
-/*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
- */
-#define	VMALLOC_START	0
-#define	VMALLOC_END	0xffffffff
-
-/*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
- */
-#define	VMALLOC_START	0
-#define	VMALLOC_END	0xffffffff
-
-#define arch_enter_lazy_cpu_mode()    do {} while (0)
-
-#include <asm-generic/pgtable.h>
-
-#endif /* _H8300_PGTABLE_H */
diff --git a/arch/h8300/include/asm/processor.h b/arch/h8300/include/asm/processor.h
deleted file mode 100644
index 4b0ca49bb463..000000000000
--- a/arch/h8300/include/asm/processor.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * include/asm-h8300/processor.h
- *
- * Copyright (C) 2002 Yoshinori Sato
- *
- * Based on: linux/asm-m68nommu/processor.h
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#ifndef __ASM_H8300_PROCESSOR_H
-#define __ASM_H8300_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#include <linux/compiler.h>
-#include <asm/segment.h>
-#include <asm/fpu.h>
-#include <asm/ptrace.h>
-#include <asm/current.h>
-
-static inline unsigned long rdusp(void) {
-	extern unsigned int	sw_usp;
-	return(sw_usp);
-}
-
-static inline void wrusp(unsigned long usp) {
-	extern unsigned int	sw_usp;
-	sw_usp = usp;
-}
-
-/*
- * User space process size: 3.75GB. This is hardcoded into a few places,
- * so don't change it unless you know what you are doing.
- */
-#define TASK_SIZE	(0xFFFFFFFFUL)
-
-#ifdef __KERNEL__
-#define STACK_TOP	TASK_SIZE
-#define STACK_TOP_MAX	STACK_TOP
-#endif
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's. We won't be using it
- */
-#define TASK_UNMAPPED_BASE	0
-
-struct thread_struct {
-	unsigned long  ksp;		/* kernel stack pointer */
-	unsigned long  usp;		/* user stack pointer */
-	unsigned long  ccr;		/* saved status register */
-	unsigned long  esp0;            /* points to SR of stack frame */
-	struct {
-		unsigned short *addr;
-		unsigned short inst;
-	} breakinfo;
-};
-
-#define INIT_THREAD  {						\
-	.ksp  = sizeof(init_stack) + (unsigned long)init_stack, \
-	.usp  = 0,						\
-	.ccr  = PS_S,						\
-	.esp0 = 0,						\
-	.breakinfo = {						\
-		.addr = (unsigned short *)-1,			\
-		.inst = 0					\
-	}							\
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- *
- * pass the data segment into user programs if it exists,
- * it can't hurt anything as far as I can tell
- */
-#if defined(__H8300H__)
-#define start_thread(_regs, _pc, _usp)			        \
-do {							        \
-  	(_regs)->pc = (_pc);				        \
-	(_regs)->ccr = 0x00;	   /* clear all flags */        \
-	(_regs)->er5 = current->mm->start_data;	/* GOT base */  \
-	wrusp((unsigned long)(_usp) - sizeof(unsigned long)*3);	\
-} while(0)
-#endif
-#if defined(__H8300S__)
-#define start_thread(_regs, _pc, _usp)			        \
-do {							        \
-	(_regs)->pc = (_pc);				        \
-	(_regs)->ccr = 0x00;	   /* clear kernel flag */      \
-	(_regs)->exr = 0x78;       /* enable all interrupts */  \
-	(_regs)->er5 = current->mm->start_data;	/* GOT base */  \
-	/* 14 = space for retaddr(4), vector(4), er0(4) and ext(2) on stack */ \
-	wrusp(((unsigned long)(_usp)) - 14);                    \
-} while(0)
-#endif
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-/*
- * Free current thread data structures etc..
- */
-static inline void exit_thread(void)
-{
-}
-
-/*
- * Return saved PC of a blocked thread.
- */
-unsigned long thread_saved_pc(struct task_struct *tsk);
-unsigned long get_wchan(struct task_struct *p);
-
-#define	KSTK_EIP(tsk)	\
-    ({			\
-	unsigned long eip = 0;	 \
-	if ((tsk)->thread.esp0 > PAGE_SIZE && \
-	    MAP_NR((tsk)->thread.esp0) < max_mapnr) \
-	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
-	eip; })
-#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
-
-#define cpu_relax()    barrier()
-
-#define HARD_RESET_NOW() ({		\
-        local_irq_disable();		\
-        asm("jmp @@0");			\
-})
-
-#endif
diff --git a/arch/h8300/include/asm/ptrace.h b/arch/h8300/include/asm/ptrace.h
deleted file mode 100644
index c1826b95c5ca..000000000000
--- a/arch/h8300/include/asm/ptrace.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _H8300_PTRACE_H
-#define _H8300_PTRACE_H
-
-#include <uapi/asm/ptrace.h>
-
-#ifndef __ASSEMBLY__
-#if defined(CONFIG_CPU_H8S)
-#endif
-#ifndef PS_S
-#define PS_S  (0x10)
-#endif
-
-#if defined(__H8300H__)
-#define H8300_REGS_NO 11
-#endif
-#if defined(__H8300S__)
-#define H8300_REGS_NO 12
-#endif
-
-/* Find the stack offset for a register, relative to thread.esp0. */
-#define PT_REG(reg)	((long)&((struct pt_regs *)0)->reg)
-
-#define arch_has_single_step()	(1)
-
-#define user_mode(regs) (!((regs)->ccr & PS_S))
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-#define current_pt_regs() ((struct pt_regs *) \
-	(THREAD_SIZE + (unsigned long)current_thread_info()) - 1)
-#define signal_pt_regs() ((struct pt_regs *)current->thread.esp0)
-#define current_user_stack_pointer() rdusp()
-#endif /* __ASSEMBLY__ */
-#endif /* _H8300_PTRACE_H */
diff --git a/arch/h8300/include/asm/regs267x.h b/arch/h8300/include/asm/regs267x.h
deleted file mode 100644
index 1bff731a9f77..000000000000
--- a/arch/h8300/include/asm/regs267x.h
+++ /dev/null
@@ -1,336 +0,0 @@
-/* internal Peripherals Register address define */
-/* CPU: H8/306x                                 */
-
-#if !defined(__REGS_H8S267x__)
-#define __REGS_H8S267x__ 
-
-#if defined(__KERNEL__)
-
-#define DASTCR 0xFEE01A
-#define DADR0  0xFFFFA4
-#define DADR1  0xFFFFA5
-#define DACR01 0xFFFFA6
-#define DADR2  0xFFFFA8
-#define DADR3  0xFFFFA9
-#define DACR23 0xFFFFAA
-
-#define ADDRA  0xFFFF90
-#define ADDRAH 0xFFFF90
-#define ADDRAL 0xFFFF91
-#define ADDRB  0xFFFF92
-#define ADDRBH 0xFFFF92
-#define ADDRBL 0xFFFF93
-#define ADDRC  0xFFFF94
-#define ADDRCH 0xFFFF94
-#define ADDRCL 0xFFFF95
-#define ADDRD  0xFFFF96
-#define ADDRDH 0xFFFF96
-#define ADDRDL 0xFFFF97
-#define ADDRE  0xFFFF98
-#define ADDREH 0xFFFF98
-#define ADDREL 0xFFFF99
-#define ADDRF  0xFFFF9A
-#define ADDRFH 0xFFFF9A
-#define ADDRFL 0xFFFF9B
-#define ADDRG  0xFFFF9C
-#define ADDRGH 0xFFFF9C
-#define ADDRGL 0xFFFF9D
-#define ADDRH  0xFFFF9E
-#define ADDRHH 0xFFFF9E
-#define ADDRHL 0xFFFF9F
-
-#define ADCSR  0xFFFFA0
-#define ADCR   0xFFFFA1
-
-#define ABWCR  0xFFFEC0
-#define ASTCR  0xFFFEC1
-#define WTCRAH 0xFFFEC2
-#define WTCRAL 0xFFFEC3
-#define WTCRBH 0xFFFEC4
-#define WTCRBL 0xFFFEC5
-#define RDNCR  0xFFFEC6
-#define CSACRH 0xFFFEC8
-#define CSACRL 0xFFFEC9
-#define BROMCRH 0xFFFECA
-#define BROMCRL 0xFFFECB
-#define BCR    0xFFFECC
-#define DRAMCR 0xFFFED0
-#define DRACCR 0xFFFED2
-#define REFCR  0xFFFED4
-#define RTCNT  0xFFFED6
-#define RTCOR  0xFFFED7
-
-#define MAR0AH  0xFFFEE0
-#define MAR0AL  0xFFFEE2
-#define IOAR0A  0xFFFEE4
-#define ETCR0A  0xFFFEE6
-#define MAR0BH  0xFFFEE8
-#define MAR0BL  0xFFFEEA
-#define IOAR0B  0xFFFEEC
-#define ETCR0B  0xFFFEEE
-#define MAR1AH  0xFFFEF0
-#define MAR1AL  0xFFFEF2
-#define IOAR1A  0xFFFEF4
-#define ETCR1A  0xFFFEF6
-#define MAR1BH  0xFFFEF8
-#define MAR1BL  0xFFFEFA
-#define IOAR1B  0xFFFEFC
-#define ETCR1B  0xFFFEFE
-#define DMAWER  0xFFFF20
-#define DMATCR  0xFFFF21
-#define DMACR0A 0xFFFF22
-#define DMACR0B 0xFFFF23
-#define DMACR1A 0xFFFF24
-#define DMACR1B 0xFFFF25
-#define DMABCRH 0xFFFF26
-#define DMABCRL 0xFFFF27
-
-#define EDSAR0  0xFFFDC0
-#define EDDAR0  0xFFFDC4
-#define EDTCR0  0xFFFDC8
-#define EDMDR0  0xFFFDCC
-#define EDMDR0H 0xFFFDCC
-#define EDMDR0L 0xFFFDCD
-#define EDACR0  0xFFFDCE
-#define EDSAR1  0xFFFDD0
-#define EDDAR1  0xFFFDD4
-#define EDTCR1  0xFFFDD8
-#define EDMDR1  0xFFFDDC
-#define EDMDR1H 0xFFFDDC
-#define EDMDR1L 0xFFFDDD
-#define EDACR1  0xFFFDDE
-#define EDSAR2  0xFFFDE0
-#define EDDAR2  0xFFFDE4
-#define EDTCR2  0xFFFDE8
-#define EDMDR2  0xFFFDEC
-#define EDMDR2H 0xFFFDEC
-#define EDMDR2L 0xFFFDED
-#define EDACR2  0xFFFDEE
-#define EDSAR3  0xFFFDF0
-#define EDDAR3  0xFFFDF4
-#define EDTCR3  0xFFFDF8
-#define EDMDR3  0xFFFDFC
-#define EDMDR3H 0xFFFDFC
-#define EDMDR3L 0xFFFDFD
-#define EDACR3  0xFFFDFE
-
-#define IPRA  0xFFFE00
-#define IPRB  0xFFFE02
-#define IPRC  0xFFFE04
-#define IPRD  0xFFFE06
-#define IPRE  0xFFFE08
-#define IPRF  0xFFFE0A
-#define IPRG  0xFFFE0C
-#define IPRH  0xFFFE0E
-#define IPRI  0xFFFE10
-#define IPRJ  0xFFFE12
-#define IPRK  0xFFFE14
-#define ITSR  0xFFFE16
-#define SSIER 0xFFFE18
-#define ISCRH 0xFFFE1A
-#define ISCRL 0xFFFE1C
-
-#define INTCR 0xFFFF31
-#define IER   0xFFFF32
-#define IERH  0xFFFF32
-#define IERL  0xFFFF33
-#define ISR   0xFFFF34
-#define ISRH  0xFFFF34
-#define ISRL  0xFFFF35
-
-#define P1DDR 0xFFFE20
-#define P2DDR 0xFFFE21
-#define P3DDR 0xFFFE22
-#define P4DDR 0xFFFE23
-#define P5DDR 0xFFFE24
-#define P6DDR 0xFFFE25
-#define P7DDR 0xFFFE26
-#define P8DDR 0xFFFE27
-#define P9DDR 0xFFFE28
-#define PADDR 0xFFFE29
-#define PBDDR 0xFFFE2A
-#define PCDDR 0xFFFE2B
-#define PDDDR 0xFFFE2C
-#define PEDDR 0xFFFE2D
-#define PFDDR 0xFFFE2E
-#define PGDDR 0xFFFE2F
-#define PHDDR 0xFFFF74
-
-#define PFCR0 0xFFFE32
-#define PFCR1 0xFFFE33
-#define PFCR2 0xFFFE34
-
-#define PAPCR 0xFFFE36
-#define PBPCR 0xFFFE37
-#define PCPCR 0xFFFE38
-#define PDPCR 0xFFFE39
-#define PEPCR 0xFFFE3A
-
-#define P3ODR 0xFFFE3C
-#define PAODR 0xFFFE3D
-
-#define P1DR  0xFFFF60
-#define P2DR  0xFFFF61
-#define P3DR  0xFFFF62
-#define P4DR  0xFFFF63
-#define P5DR  0xFFFF64
-#define P6DR  0xFFFF65
-#define P7DR  0xFFFF66
-#define P8DR  0xFFFF67
-#define P9DR  0xFFFF68
-#define PADR  0xFFFF69
-#define PBDR  0xFFFF6A
-#define PCDR  0xFFFF6B
-#define PDDR  0xFFFF6C
-#define PEDR  0xFFFF6D
-#define PFDR  0xFFFF6E
-#define PGDR  0xFFFF6F
-#define PHDR  0xFFFF72
-
-#define PORT1 0xFFFF50
-#define PORT2 0xFFFF51
-#define PORT3 0xFFFF52
-#define PORT4 0xFFFF53
-#define PORT5 0xFFFF54
-#define PORT6 0xFFFF55
-#define PORT7 0xFFFF56
-#define PORT8 0xFFFF57
-#define PORT9 0xFFFF58
-#define PORTA 0xFFFF59
-#define PORTB 0xFFFF5A
-#define PORTC 0xFFFF5B
-#define PORTD 0xFFFF5C
-#define PORTE 0xFFFF5D
-#define PORTF 0xFFFF5E
-#define PORTG 0xFFFF5F
-#define PORTH 0xFFFF70
-
-#define PCR   0xFFFF46
-#define PMR   0xFFFF47
-#define NDERH 0xFFFF48
-#define NDERL 0xFFFF49
-#define PODRH 0xFFFF4A
-#define PODRL 0xFFFF4B
-#define NDRH1 0xFFFF4C
-#define NDRL1 0xFFFF4D
-#define NDRH2 0xFFFF4E
-#define NDRL2 0xFFFF4F
-
-#define SMR0  0xFFFF78
-#define BRR0  0xFFFF79
-#define SCR0  0xFFFF7A
-#define TDR0  0xFFFF7B
-#define SSR0  0xFFFF7C
-#define RDR0  0xFFFF7D
-#define SCMR0 0xFFFF7E
-#define SMR1  0xFFFF80
-#define BRR1  0xFFFF81
-#define SCR1  0xFFFF82
-#define TDR1  0xFFFF83
-#define SSR1  0xFFFF84
-#define RDR1  0xFFFF85
-#define SCMR1 0xFFFF86
-#define SMR2  0xFFFF88
-#define BRR2  0xFFFF89
-#define SCR2  0xFFFF8A
-#define TDR2  0xFFFF8B
-#define SSR2  0xFFFF8C
-#define RDR2  0xFFFF8D
-#define SCMR2 0xFFFF8E
-
-#define IRCR0 0xFFFE1E
-#define SEMR  0xFFFDA8
-
-#define MDCR    0xFFFF3E
-#define SYSCR   0xFFFF3D
-#define MSTPCRH 0xFFFF40
-#define MSTPCRL 0xFFFF41
-#define FLMCR1  0xFFFFC8
-#define FLMCR2  0xFFFFC9
-#define EBR1    0xFFFFCA
-#define EBR2    0xFFFFCB
-#define CTGARC_RAMCR   0xFFFECE
-#define SBYCR   0xFFFF3A
-#define SCKCR   0xFFFF3B
-#define PLLCR   0xFFFF45
-
-#define TSTR   0xFFFFC0
-#define TSNC   0XFFFFC1
-
-#define TCR0   0xFFFFD0
-#define TMDR0  0xFFFFD1
-#define TIORH0 0xFFFFD2
-#define TIORL0 0xFFFFD3
-#define TIER0  0xFFFFD4
-#define TSR0   0xFFFFD5
-#define TCNT0  0xFFFFD6
-#define GRA0   0xFFFFD8
-#define GRB0   0xFFFFDA
-#define GRC0   0xFFFFDC
-#define GRD0   0xFFFFDE
-#define TCR1   0xFFFFE0
-#define TMDR1  0xFFFFE1
-#define TIORH1 0xFFFFE2
-#define TIORL1 0xFFFFE3
-#define TIER1  0xFFFFE4
-#define TSR1   0xFFFFE5
-#define TCNT1  0xFFFFE6
-#define GRA1   0xFFFFE8
-#define GRB1   0xFFFFEA
-#define TCR2   0xFFFFF0
-#define TMDR2  0xFFFFF1
-#define TIORH2 0xFFFFF2
-#define TIORL2 0xFFFFF3
-#define TIER2  0xFFFFF4
-#define TSR2   0xFFFFF5
-#define TCNT2  0xFFFFF6
-#define GRA2   0xFFFFF8
-#define GRB2   0xFFFFFA
-#define TCR3   0xFFFE80
-#define TMDR3  0xFFFE81
-#define TIORH3 0xFFFE82
-#define TIORL3 0xFFFE83
-#define TIER3  0xFFFE84
-#define TSR3   0xFFFE85
-#define TCNT3  0xFFFE86
-#define GRA3   0xFFFE88
-#define GRB3   0xFFFE8A
-#define GRC3   0xFFFE8C
-#define GRD3   0xFFFE8E
-#define TCR4   0xFFFE90
-#define TMDR4  0xFFFE91
-#define TIORH4 0xFFFE92
-#define TIORL4 0xFFFE93
-#define TIER4  0xFFFE94
-#define TSR4   0xFFFE95
-#define TCNT4  0xFFFE96
-#define GRA4   0xFFFE98
-#define GRB4   0xFFFE9A
-#define TCR5   0xFFFEA0
-#define TMDR5  0xFFFEA1
-#define TIORH5 0xFFFEA2
-#define TIORL5 0xFFFEA3
-#define TIER5  0xFFFEA4
-#define TSR5   0xFFFEA5
-#define TCNT5  0xFFFEA6
-#define GRA5   0xFFFEA8
-#define GRB5   0xFFFEAA
-
-#define _8TCR0   0xFFFFB0
-#define _8TCR1   0xFFFFB1
-#define _8TCSR0  0xFFFFB2
-#define _8TCSR1  0xFFFFB3
-#define _8TCORA0 0xFFFFB4
-#define _8TCORA1 0xFFFFB5
-#define _8TCORB0 0xFFFFB6
-#define _8TCORB1 0xFFFFB7
-#define _8TCNT0  0xFFFFB8
-#define _8TCNT1  0xFFFFB9
-
-#define TCSR    0xFFFFBC
-#define TCNT    0xFFFFBD
-#define RSTCSRW 0xFFFFBE
-#define RSTCSRR 0xFFFFBF
-
-#endif /* __KERNEL__ */
-#endif /* __REGS_H8S267x__ */
diff --git a/arch/h8300/include/asm/regs306x.h b/arch/h8300/include/asm/regs306x.h
deleted file mode 100644
index 027dd633fa25..000000000000
--- a/arch/h8300/include/asm/regs306x.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/* internal Peripherals Register address define */
-/* CPU: H8/306x                                 */
-
-#if !defined(__REGS_H8306x__)
-#define __REGS_H8306x__ 
-
-#if defined(__KERNEL__)
-
-#define DASTCR 0xFEE01A
-#define DADR0  0xFEE09C
-#define DADR1  0xFEE09D
-#define DACR   0xFEE09E
-
-#define ADDRAH 0xFFFFE0
-#define ADDRAL 0xFFFFE1
-#define ADDRBH 0xFFFFE2
-#define ADDRBL 0xFFFFE3
-#define ADDRCH 0xFFFFE4
-#define ADDRCL 0xFFFFE5
-#define ADDRDH 0xFFFFE6
-#define ADDRDL 0xFFFFE7
-#define ADCSR  0xFFFFE8
-#define ADCR   0xFFFFE9
-
-#define BRCR   0xFEE013
-#define ADRCR  0xFEE01E
-#define CSCR   0xFEE01F
-#define ABWCR  0xFEE020
-#define ASTCR  0xFEE021
-#define WCRH   0xFEE022
-#define WCRL   0xFEE023
-#define BCR    0xFEE024
-#define DRCRA  0xFEE026
-#define DRCRB  0xFEE027
-#define RTMCSR 0xFEE028
-#define RTCNT  0xFEE029
-#define RTCOR  0xFEE02A
-
-#define MAR0AR  0xFFFF20
-#define MAR0AE  0xFFFF21
-#define MAR0AH  0xFFFF22
-#define MAR0AL  0xFFFF23
-#define ETCR0AL 0xFFFF24
-#define ETCR0AH 0xFFFF25
-#define IOAR0A  0xFFFF26
-#define DTCR0A  0xFFFF27
-#define MAR0BR  0xFFFF28
-#define MAR0BE  0xFFFF29
-#define MAR0BH  0xFFFF2A
-#define MAR0BL  0xFFFF2B
-#define ETCR0BL 0xFFFF2C
-#define ETCR0BH 0xFFFF2D
-#define IOAR0B  0xFFFF2E
-#define DTCR0B  0xFFFF2F
-#define MAR1AR  0xFFFF30
-#define MAR1AE  0xFFFF31
-#define MAR1AH  0xFFFF32
-#define MAR1AL  0xFFFF33
-#define ETCR1AL 0xFFFF34
-#define ETCR1AH 0xFFFF35
-#define IOAR1A  0xFFFF36
-#define DTCR1A  0xFFFF37
-#define MAR1BR  0xFFFF38
-#define MAR1BE  0xFFFF39
-#define MAR1BH  0xFFFF3A
-#define MAR1BL  0xFFFF3B
-#define ETCR1BL 0xFFFF3C
-#define ETCR1BH 0xFFFF3D
-#define IOAR1B  0xFFFF3E
-#define DTCR1B  0xFFFF3F
-
-#define ISCR 0xFEE014
-#define IER  0xFEE015
-#define ISR  0xFEE016
-#define IPRA 0xFEE018
-#define IPRB 0xFEE019
-
-#define P1DDR 0xFEE000
-#define P2DDR 0xFEE001
-#define P3DDR 0xFEE002
-#define P4DDR 0xFEE003
-#define P5DDR 0xFEE004
-#define P6DDR 0xFEE005
-/*#define P7DDR 0xFEE006*/
-#define P8DDR 0xFEE007
-#define P9DDR 0xFEE008
-#define PADDR 0xFEE009
-#define PBDDR 0xFEE00A
-
-#define P1DR  0xFFFFD0
-#define P2DR  0xFFFFD1
-#define P3DR  0xFFFFD2
-#define P4DR  0xFFFFD3
-#define P5DR  0xFFFFD4
-#define P6DR  0xFFFFD5
-/*#define P7DR  0xFFFFD6*/
-#define P8DR  0xFFFFD7
-#define P9DR  0xFFFFD8
-#define PADR  0xFFFFD9
-#define PBDR  0xFFFFDA
-
-#define P2CR  0xFEE03C
-#define P4CR  0xFEE03E
-#define P5CR  0xFEE03F
-
-#define SMR0  0xFFFFB0
-#define BRR0  0xFFFFB1
-#define SCR0  0xFFFFB2
-#define TDR0  0xFFFFB3
-#define SSR0  0xFFFFB4
-#define RDR0  0xFFFFB5
-#define SCMR0 0xFFFFB6
-#define SMR1  0xFFFFB8
-#define BRR1  0xFFFFB9
-#define SCR1  0xFFFFBA
-#define TDR1  0xFFFFBB
-#define SSR1  0xFFFFBC
-#define RDR1  0xFFFFBD
-#define SCMR1 0xFFFFBE
-#define SMR2  0xFFFFC0
-#define BRR2  0xFFFFC1
-#define SCR2  0xFFFFC2
-#define TDR2  0xFFFFC3
-#define SSR2  0xFFFFC4
-#define RDR2  0xFFFFC5
-#define SCMR2 0xFFFFC6
-
-#define MDCR   0xFEE011
-#define SYSCR  0xFEE012
-#define DIVCR  0xFEE01B
-#define MSTCRH 0xFEE01C
-#define MSTCRL 0xFEE01D
-#define FLMCR1 0xFEE030
-#define FLMCR2 0xFEE031
-#define EBR1   0xFEE032
-#define EBR2   0xFEE033
-#define RAMCR  0xFEE077
-
-#define TSTR   0xFFFF60
-#define TSNC   0XFFFF61
-#define TMDR   0xFFFF62
-#define TOLR   0xFFFF63
-#define TISRA  0xFFFF64
-#define TISRB  0xFFFF65
-#define TISRC  0xFFFF66
-#define TCR0   0xFFFF68
-#define TIOR0  0xFFFF69
-#define TCNT0H 0xFFFF6A
-#define TCNT0L 0xFFFF6B
-#define GRA0H  0xFFFF6C
-#define GRA0L  0xFFFF6D
-#define GRB0H  0xFFFF6E
-#define GRB0L  0xFFFF6F
-#define TCR1   0xFFFF70
-#define TIOR1  0xFFFF71
-#define TCNT1H 0xFFFF72
-#define TCNT1L 0xFFFF73
-#define GRA1H  0xFFFF74
-#define GRA1L  0xFFFF75
-#define GRB1H  0xFFFF76
-#define GRB1L  0xFFFF77
-#define TCR3   0xFFFF78
-#define TIOR3  0xFFFF79
-#define TCNT3H 0xFFFF7A
-#define TCNT3L 0xFFFF7B
-#define GRA3H  0xFFFF7C
-#define GRA3L  0xFFFF7D
-#define GRB3H  0xFFFF7E
-#define GRB3L  0xFFFF7F
-
-#define _8TCR0  0xFFFF80
-#define _8TCR1  0xFFFF81
-#define _8TCSR0 0xFFFF82
-#define _8TCSR1 0xFFFF83
-#define TCORA0 0xFFFF84
-#define TCORA1 0xFFFF85
-#define TCORB0 0xFFFF86
-#define TCORB1 0xFFFF87
-#define _8TCNT0 0xFFFF88
-#define _8TCNT1 0xFFFF89
-
-#define _8TCR2  0xFFFF90
-#define _8TCR3  0xFFFF91
-#define _8TCSR2 0xFFFF92
-#define _8TCSR3 0xFFFF93
-#define TCORA2 0xFFFF94
-#define TCORA3 0xFFFF95
-#define TCORB2 0xFFFF96
-#define TCORB3 0xFFFF97
-#define _8TCNT2 0xFFFF98
-#define _8TCNT3 0xFFFF99
-
-#define TCSR   0xFFFF8C
-#define TCNT   0xFFFF8D
-#define RSTCSR 0xFFFF8F
-
-#define TPMR  0xFFFFA0
-#define TPCR  0xFFFFA1
-#define NDERB 0xFFFFA2
-#define NDERA 0xFFFFA3
-#define NDRB1 0xFFFFA4
-#define NDRA1 0xFFFFA5
-#define NDRB2 0xFFFFA6
-#define NDRA2 0xFFFFA7
-
-#define TCSR    0xFFFF8C
-#define TCNT    0xFFFF8D
-#define RSTCSRW 0xFFFF8E
-#define RSTCSRR 0xFFFF8F
-
-#endif /* __KERNEL__ */
-#endif /* __REGS_H8306x__ */
diff --git a/arch/h8300/include/asm/scatterlist.h b/arch/h8300/include/asm/scatterlist.h
deleted file mode 100644
index 82130eda0e5f..000000000000
--- a/arch/h8300/include/asm/scatterlist.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _H8300_SCATTERLIST_H
-#define _H8300_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* !(_H8300_SCATTERLIST_H) */
diff --git a/arch/h8300/include/asm/sections.h b/arch/h8300/include/asm/sections.h
deleted file mode 100644
index a81743e8b743..000000000000
--- a/arch/h8300/include/asm/sections.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _H8300_SECTIONS_H_
-#define _H8300_SECTIONS_H_
-
-#include <asm-generic/sections.h>
-
-#endif
diff --git a/arch/h8300/include/asm/segment.h b/arch/h8300/include/asm/segment.h
deleted file mode 100644
index b79a82d0f99d..000000000000
--- a/arch/h8300/include/asm/segment.h
+++ /dev/null
@@ -1,49 +0,0 @@
-#ifndef _H8300_SEGMENT_H
-#define _H8300_SEGMENT_H
-
-/* define constants */
-#define USER_DATA     (1)
-#ifndef __USER_DS
-#define __USER_DS     (USER_DATA)
-#endif
-#define USER_PROGRAM  (2)
-#define SUPER_DATA    (3)
-#ifndef __KERNEL_DS
-#define __KERNEL_DS   (SUPER_DATA)
-#endif
-#define SUPER_PROGRAM (4)
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
-#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
-#define USER_DS		MAKE_MM_SEG(__USER_DS)
-#define KERNEL_DS	MAKE_MM_SEG(__KERNEL_DS)
-
-/*
- * Get/set the SFC/DFC registers for MOVES instructions
- */
-
-static inline mm_segment_t get_fs(void)
-{
-    return USER_DS;
-}
-
-static inline mm_segment_t get_ds(void)
-{
-    /* return the supervisor data space code */
-    return KERNEL_DS;
-}
-
-static inline void set_fs(mm_segment_t val)
-{
-}
-
-#define segment_eq(a,b)	((a).seg == (b).seg)
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _H8300_SEGMENT_H */
diff --git a/arch/h8300/include/asm/sh_bios.h b/arch/h8300/include/asm/sh_bios.h
deleted file mode 100644
index b6bb6e58295c..000000000000
--- a/arch/h8300/include/asm/sh_bios.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* eCos HAL interface header */
-
-#ifndef SH_BIOS_H
-#define SH_BIOS_H
-
-#define HAL_IF_VECTOR_TABLE 0xfffe20
-#define CALL_IF_SET_CONSOLE_COMM  13
-#define QUERY_CURRENT -1
-#define MANGLER       -3
-
-/* Checking for GDB stub active */
-/* suggestion Jonathan Larmour */
-static int sh_bios_in_gdb_mode(void)
-{
-	static int gdb_active = -1;
-	if (gdb_active == -1) {
-		int (*set_console_comm)(int);
-		set_console_comm = ((void **)HAL_IF_VECTOR_TABLE)[CALL_IF_SET_CONSOLE_COMM];
-		gdb_active = (set_console_comm(QUERY_CURRENT) == MANGLER);
-	}
-	return gdb_active;
-}
-
-static void sh_bios_gdb_detach(void)
-{
-
-}
-
-#endif
diff --git a/arch/h8300/include/asm/shm.h b/arch/h8300/include/asm/shm.h
deleted file mode 100644
index ed6623c0545d..000000000000
--- a/arch/h8300/include/asm/shm.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _H8300_SHM_H
-#define _H8300_SHM_H
-
-
-/* format of page table entries that correspond to shared memory pages
-   currently out in swap space (see also mm/swap.c):
-   bits 0-1 (PAGE_PRESENT) is  = 0
-   bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE
-   bits 31..9 are used like this:
-   bits 15..9 (SHM_ID) the id of the shared memory segment
-   bits 30..16 (SHM_IDX) the index of the page within the shared memory segment
-                    (actually only bits 25..16 get used since SHMMAX is so low)
-   bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach
-*/
-/* on the m68k both bits 0 and 1 must be zero */
-/* format on the sun3 is similar, but bits 30, 31 are set to zero and all
-   others are reduced by 2. --m */
-
-#ifndef CONFIG_SUN3
-#define SHM_ID_SHIFT	9
-#else
-#define SHM_ID_SHIFT	7
-#endif
-#define _SHM_ID_BITS	7
-#define SHM_ID_MASK	((1<<_SHM_ID_BITS)-1)
-
-#define SHM_IDX_SHIFT	(SHM_ID_SHIFT+_SHM_ID_BITS)
-#define _SHM_IDX_BITS	15
-#define SHM_IDX_MASK	((1<<_SHM_IDX_BITS)-1)
-
-#endif /* _H8300_SHM_H */
diff --git a/arch/h8300/include/asm/shmparam.h b/arch/h8300/include/asm/shmparam.h
deleted file mode 100644
index d1863953ec64..000000000000
--- a/arch/h8300/include/asm/shmparam.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _H8300_SHMPARAM_H
-#define _H8300_SHMPARAM_H
-
-#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
-
-#endif /* _H8300_SHMPARAM_H */
diff --git a/arch/h8300/include/asm/signal.h b/arch/h8300/include/asm/signal.h
deleted file mode 100644
index 6341e36386f8..000000000000
--- a/arch/h8300/include/asm/signal.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _H8300_SIGNAL_H
-#define _H8300_SIGNAL_H
-
-#include <uapi/asm/signal.h>
-
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-#define _NSIG		64
-#define _NSIG_BPW	32
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#define __ARCH_HAS_SA_RESTORER
-
-#include <asm/sigcontext.h>
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#endif /* _H8300_SIGNAL_H */
diff --git a/arch/h8300/include/asm/smp.h b/arch/h8300/include/asm/smp.h
deleted file mode 100644
index 9e9bd7e58922..000000000000
--- a/arch/h8300/include/asm/smp.h
+++ /dev/null
@@ -1 +0,0 @@
-/* nothing required here yet */
diff --git a/arch/h8300/include/asm/spinlock.h b/arch/h8300/include/asm/spinlock.h
deleted file mode 100644
index d5407fa173e4..000000000000
--- a/arch/h8300/include/asm/spinlock.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __H8300_SPINLOCK_H
-#define __H8300_SPINLOCK_H
-
-#error "H8/300 doesn't do SMP yet"
-
-#endif
diff --git a/arch/h8300/include/asm/string.h b/arch/h8300/include/asm/string.h
deleted file mode 100644
index ca5034897d87..000000000000
--- a/arch/h8300/include/asm/string.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _H8300_STRING_H_
-#define _H8300_STRING_H_
-
-#ifdef __KERNEL__ /* only set these up for kernel code */
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-#define __HAVE_ARCH_MEMSET
-extern void * memset(void * s, int c, size_t count);
-
-#define __HAVE_ARCH_MEMCPY
-extern void * memcpy(void *d, const void *s, size_t count);
-
-#else /* KERNEL */
-
-/*
- *	let user libraries deal with these,
- *	IMHO the kernel has no place defining these functions for user apps
- */
-
-#define __HAVE_ARCH_STRCPY 1
-#define __HAVE_ARCH_STRNCPY 1
-#define __HAVE_ARCH_STRCAT 1
-#define __HAVE_ARCH_STRNCAT 1
-#define __HAVE_ARCH_STRCMP 1
-#define __HAVE_ARCH_STRNCMP 1
-#define __HAVE_ARCH_STRNICMP 1
-#define __HAVE_ARCH_STRCHR 1
-#define __HAVE_ARCH_STRRCHR 1
-#define __HAVE_ARCH_STRSTR 1
-#define __HAVE_ARCH_STRLEN 1
-#define __HAVE_ARCH_STRNLEN 1
-#define __HAVE_ARCH_MEMSET 1
-#define __HAVE_ARCH_MEMCPY 1
-#define __HAVE_ARCH_MEMMOVE 1
-#define __HAVE_ARCH_MEMSCAN 1
-#define __HAVE_ARCH_MEMCMP 1
-#define __HAVE_ARCH_MEMCHR 1
-#define __HAVE_ARCH_STRTOK 1
-
-#endif /* KERNEL */
-
-#endif /* _M68K_STRING_H_ */
diff --git a/arch/h8300/include/asm/switch_to.h b/arch/h8300/include/asm/switch_to.h
deleted file mode 100644
index cdd8731ce487..000000000000
--- a/arch/h8300/include/asm/switch_to.h
+++ /dev/null
@@ -1,50 +0,0 @@
-#ifndef _H8300_SWITCH_TO_H
-#define _H8300_SWITCH_TO_H
-
-/*
- * switch_to(n) should switch tasks to task ptr, first checking that
- * ptr isn't the current task, in which case it does nothing.  This
- * also clears the TS-flag if the task we switched to has used the
- * math co-processor latest.
- */
-/*
- * switch_to() saves the extra registers, that are not saved
- * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
- * a0-a1. Some of these are used by schedule() and its predecessors
- * and so we might get see unexpected behaviors when a task returns
- * with unexpected register values.
- *
- * syscall stores these registers itself and none of them are used
- * by syscall after the function in the syscall has been called.
- *
- * Beware that resume now expects *next to be in d1 and the offset of
- * tss to be in a1. This saves a few instructions as we no longer have
- * to push them onto the stack and read them back right after.
- *
- * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
- *
- * Changed 96/09/19 by Andreas Schwab
- * pass prev in a0, next in a1, offset of tss in d1, and whether
- * the mm structures are shared in d2 (to avoid atc flushing).
- *
- * H8/300 Porting 2002/09/04 Yoshinori Sato
- */
-
-asmlinkage void resume(void);
-#define switch_to(prev,next,last) {                         \
-  void *_last;						    \
-  __asm__ __volatile__(					    \
-  			"mov.l	%1, er0\n\t"		    \
-			"mov.l	%2, er1\n\t"		    \
-                        "mov.l  %3, er2\n\t"                \
-			"jsr @_resume\n\t"                  \
-                        "mov.l  er2,%0\n\t"                 \
-		       : "=r" (_last)			    \
-		       : "r" (&(prev->thread)),		    \
-			 "r" (&(next->thread)),		    \
-                         "g" (prev)                         \
-		       : "cc", "er0", "er1", "er2", "er3"); \
-  (last) = _last; 					    \
-}
-
-#endif /* _H8300_SWITCH_TO_H */
diff --git a/arch/h8300/include/asm/target_time.h b/arch/h8300/include/asm/target_time.h
deleted file mode 100644
index 9f2a9aa1fe6f..000000000000
--- a/arch/h8300/include/asm/target_time.h
+++ /dev/null
@@ -1,4 +0,0 @@
-extern int platform_timer_setup(void (*timer_int)(int, void *, struct pt_regs *));
-extern void platform_timer_eoi(void);
-extern void platform_gettod(unsigned int *year, unsigned int *mon, unsigned int *day, 
-                            unsigned int *hour, unsigned int *min, unsigned int *sec);
diff --git a/arch/h8300/include/asm/termios.h b/arch/h8300/include/asm/termios.h
deleted file mode 100644
index 93a63df56247..000000000000
--- a/arch/h8300/include/asm/termios.h
+++ /dev/null
@@ -1,50 +0,0 @@
-#ifndef _H8300_TERMIOS_H
-#define _H8300_TERMIOS_H
-
-#include <uapi/asm/termios.h>
-
-/*	intr=^C		quit=^|		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
-	unsigned short tmp; \
-	get_user(tmp, &(termio)->c_iflag); \
-	(termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
-	get_user(tmp, &(termio)->c_oflag); \
-	(termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
-	get_user(tmp, &(termio)->c_cflag); \
-	(termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
-	get_user(tmp, &(termio)->c_lflag); \
-	(termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
-	get_user((termios)->c_line, &(termio)->c_line); \
-	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
-	put_user((termios)->c_iflag, &(termio)->c_iflag); \
-	put_user((termios)->c_oflag, &(termio)->c_oflag); \
-	put_user((termios)->c_cflag, &(termio)->c_cflag); \
-	put_user((termios)->c_lflag, &(termio)->c_lflag); \
-	put_user((termios)->c_line,  &(termio)->c_line); \
-	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif /* _H8300_TERMIOS_H */
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
deleted file mode 100644
index ec2f7777c65a..000000000000
--- a/arch/h8300/include/asm/thread_info.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/* thread_info.h: h8300 low-level thread information
- * adapted from the i386 and PPC versions by Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Copyright (C) 2002  David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#include <asm/page.h>
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-/*
- * low level task data.
- * If you change this, change the TI_* offsets below to match.
- */
-struct thread_info {
-	struct task_struct *task;		/* main task structure */
-	struct exec_domain *exec_domain;	/* execution domain */
-	unsigned long	   flags;		/* low level flags */
-	int		   cpu;			/* cpu we're on */
-	int		   preempt_count;	/* 0 => preemptable, <0 => BUG */
-	struct restart_block restart_block;
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task =		&tsk,			\
-	.exec_domain =	&default_exec_domain,	\
-	.flags =	0,			\
-	.cpu =		0,			\
-	.preempt_count = INIT_PREEMPT_COUNT,	\
-	.restart_block	= {			\
-		.fn = do_no_restart_syscall,	\
-	},					\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-
-/*
- * Size of kernel stack for each process. This must be a power of 2...
- */
-#define THREAD_SIZE_ORDER	1
-#define THREAD_SIZE		8192	/* 2 pages */
-
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
-	struct thread_info *ti;
-	__asm__(
-		"mov.l	sp, %0 \n\t"
-		"and.l	%1, %0"
-		: "=&r"(ti)
-		: "i" (~(THREAD_SIZE-1))
-		);
-	return ti;
-}
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * Offsets in thread_info structure, used in assembly code
- */
-#define TI_TASK		0
-#define TI_EXECDOMAIN	4
-#define TI_FLAGS	8
-#define TI_CPU		12
-#define TI_PRE_COUNT	16
-
-#define	PREEMPT_ACTIVE	0x4000000
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_MEMDIE		4	/* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
-#define TIF_NOTIFY_RESUME	6	/* callback before returning to user */
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
-
-#define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
-				 _TIF_NOTIFY_RESUME)
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/h8300/include/asm/timer.h b/arch/h8300/include/asm/timer.h
deleted file mode 100644
index def80464d38f..000000000000
--- a/arch/h8300/include/asm/timer.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __H8300_TIMER_H
-#define __H8300_TIMER_H
-
-void h8300_timer_tick(void);
-void h8300_timer_setup(void);
-void h8300_gettod(unsigned int *year, unsigned int *mon, unsigned int *day,
-		   unsigned int *hour, unsigned int *min, unsigned int *sec);
-
-#define TIMER_FREQ (CONFIG_CPU_CLOCK*10000) /* Timer input freq. */
-
-#define calc_param(cnt, div, rate, limit)			\
-do {								\
-	cnt = TIMER_FREQ / HZ;					\
-	for (div = 0; div < ARRAY_SIZE(divide_rate); div++) {	\
-		if (rate[div] == 0)				\
-			continue;				\
-		if ((cnt / rate[div]) > limit)			\
-			break;					\
-	}							\
-	if (div == ARRAY_SIZE(divide_rate))			\
-		panic("Timer counter overflow");		\
-	cnt /= divide_rate[div];				\
-} while(0)
-
-#endif
diff --git a/arch/h8300/include/asm/timex.h b/arch/h8300/include/asm/timex.h
deleted file mode 100644
index 23e67013439f..000000000000
--- a/arch/h8300/include/asm/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * linux/include/asm-h8300/timex.h
- *
- * H8/300 architecture timex specifications
- */
-#ifndef _ASM_H8300_TIMEX_H
-#define _ASM_H8300_TIMEX_H
-
-#define CLOCK_TICK_RATE (CONFIG_CPU_CLOCK*1000/8192) /* Timer input freq. */
-
-typedef unsigned long cycles_t;
-extern short h8300_timer_count;
-
-static inline cycles_t get_cycles(void)
-{
-	return 0;
-}
-
-#endif
diff --git a/arch/h8300/include/asm/tlb.h b/arch/h8300/include/asm/tlb.h
deleted file mode 100644
index 7f0743051ad5..000000000000
--- a/arch/h8300/include/asm/tlb.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __H8300_TLB_H__
-#define __H8300_TLB_H__
-
-#define tlb_flush(tlb)	do { } while(0)
-
-#include <asm-generic/tlb.h>
-
-#endif
diff --git a/arch/h8300/include/asm/tlbflush.h b/arch/h8300/include/asm/tlbflush.h
deleted file mode 100644
index 41c148a9208e..000000000000
--- a/arch/h8300/include/asm/tlbflush.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef _H8300_TLBFLUSH_H
-#define _H8300_TLBFLUSH_H
-
-/*
- * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
- * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
- */
-
-#include <asm/setup.h>
-
-/*
- * flush all user-space atc entries.
- */
-static inline void __flush_tlb(void)
-{
-	BUG();
-}
-
-static inline void __flush_tlb_one(unsigned long addr)
-{
-	BUG();
-}
-
-#define flush_tlb() __flush_tlb()
-
-/*
- * flush all atc entries (both kernel and user-space entries).
- */
-static inline void flush_tlb_all(void)
-{
-	BUG();
-}
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
-	BUG();
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
-{
-	BUG();
-}
-
-static inline void flush_tlb_range(struct mm_struct *mm,
-				   unsigned long start, unsigned long end)
-{
-	BUG();
-}
-
-static inline void flush_tlb_kernel_page(unsigned long addr)
-{
-	BUG();
-}
-
-#endif /* _H8300_TLBFLUSH_H */
diff --git a/arch/h8300/include/asm/topology.h b/arch/h8300/include/asm/topology.h
deleted file mode 100644
index fdc121924d4c..000000000000
--- a/arch/h8300/include/asm/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_H8300_TOPOLOGY_H
-#define _ASM_H8300_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_H8300_TOPOLOGY_H */
diff --git a/arch/h8300/include/asm/traps.h b/arch/h8300/include/asm/traps.h
deleted file mode 100644
index 41cf6be02f68..000000000000
--- a/arch/h8300/include/asm/traps.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  linux/include/asm-h8300/traps.h
- *
- *  Copyright (C) 2003 Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#ifndef _H8300_TRAPS_H
-#define _H8300_TRAPS_H
-
-extern void system_call(void);
-extern void interrupt_entry(void);
-extern void trace_break(void);
-
-#define JMP_OP 0x5a000000
-#define JSR_OP 0x5e000000
-#define VECTOR(address) ((JMP_OP)|((unsigned long)address))
-#define REDIRECT(address) ((JSR_OP)|((unsigned long)address))
-
-#define TRACE_VEC 5
-
-#define TRAP0_VEC 8
-#define TRAP1_VEC 9
-#define TRAP2_VEC 10
-#define TRAP3_VEC 11
-
-#if defined(__H8300H__)
-#define NR_TRAPS 12
-#endif
-#if defined(__H8300S__)
-#define NR_TRAPS 16
-#endif
-
-#endif /* _H8300_TRAPS_H */
diff --git a/arch/h8300/include/asm/types.h b/arch/h8300/include/asm/types.h
deleted file mode 100644
index c012707f6037..000000000000
--- a/arch/h8300/include/asm/types.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _H8300_TYPES_H
-#define _H8300_TYPES_H
-
-#include <uapi/asm/types.h>
-
-
-#define BITS_PER_LONG 32
-
-#endif /* _H8300_TYPES_H */
diff --git a/arch/h8300/include/asm/uaccess.h b/arch/h8300/include/asm/uaccess.h
deleted file mode 100644
index 8725d1ad4272..000000000000
--- a/arch/h8300/include/asm/uaccess.h
+++ /dev/null
@@ -1,163 +0,0 @@
-#ifndef __H8300_UACCESS_H
-#define __H8300_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-
-#include <asm/segment.h>
-
-#define VERIFY_READ	0
-#define VERIFY_WRITE	1
-
-/* We let the MMU do all checking */
-#define access_ok(type, addr, size) __access_ok((unsigned long)addr,size)
-static inline int __access_ok(unsigned long addr, unsigned long size)
-{
-#define	RANGE_CHECK_OK(addr, size, lower, upper) \
-	(((addr) >= (lower)) && (((addr) + (size)) < (upper)))
-
-	extern unsigned long _ramend;
-	return(RANGE_CHECK_OK(addr, size, 0L, (unsigned long)&_ramend));
-}
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
-	unsigned long insn, fixup;
-};
-
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-
-
-/*
- * These are the main single-value transfer routines.  They automatically
- * use the right size if we just have the right pointer type.
- */
-
-#define put_user(x, ptr)				\
-({							\
-    int __pu_err = 0;					\
-    typeof(*(ptr)) __pu_val = (x);			\
-    switch (sizeof (*(ptr))) {				\
-    case 1:						\
-    case 2:						\
-    case 4:						\
-	*(ptr) = (__pu_val);   	        		\
-	break;						\
-    case 8:						\
-	memcpy(ptr, &__pu_val, sizeof (*(ptr)));        \
-	break;						\
-    default:						\
-	__pu_err = __put_user_bad();			\
-	break;						\
-    }							\
-    __pu_err;						\
-})
-#define __put_user(x, ptr) put_user(x, ptr)
-
-extern int __put_user_bad(void);
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-
-#define __ptr(x) ((unsigned long *)(x))
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-
-#define get_user(x, ptr)					\
-({								\
-    int __gu_err = 0;						\
-    typeof(*(ptr)) __gu_val = *ptr;				\
-    switch (sizeof(*(ptr))) {					\
-    case 1:							\
-    case 2:							\
-    case 4:							\
-    case 8: 							\
-	break;							\
-    default:							\
-	__gu_err = __get_user_bad();				\
-	break;							\
-    }								\
-    (x) = __gu_val;						\
-    __gu_err;							\
-})
-#define __get_user(x, ptr) get_user(x, ptr)
-
-extern int __get_user_bad(void);
-
-#define copy_from_user(to, from, n)		(memcpy(to, from, n), 0)
-#define copy_to_user(to, from, n)		(memcpy(to, from, n), 0)
-
-#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
-#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; })
-
-#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; })
-
-/*
- * Copy a null terminated string from userspace.
- */
-
-static inline long
-strncpy_from_user(char *dst, const char *src, long count)
-{
-	char *tmp;
-	strncpy(dst, src, count);
-	for (tmp = dst; *tmp && count > 0; tmp++, count--)
-		;
-	return(tmp - dst); /* DAVIDM should we count a NUL ?  check getname */
-}
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-static inline long strnlen_user(const char *src, long n)
-{
-	return(strlen(src) + 1); /* DAVIDM make safer */
-}
-
-#define strlen_user(str) strnlen_user(str, 32767)
-
-/*
- * Zero Userspace
- */
-
-static inline unsigned long
-clear_user(void *to, unsigned long n)
-{
-	memset(to, 0, n);
-	return 0;
-}
-
-#define __clear_user	clear_user
-
-#endif /* _H8300_UACCESS_H */
diff --git a/arch/h8300/include/asm/ucontext.h b/arch/h8300/include/asm/ucontext.h
deleted file mode 100644
index 0bcf8f85fab9..000000000000
--- a/arch/h8300/include/asm/ucontext.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _H8300_UCONTEXT_H
-#define _H8300_UCONTEXT_H
-
-struct ucontext {
-	unsigned long	  uc_flags;
-	struct ucontext  *uc_link;
-	stack_t		  uc_stack;
-	struct sigcontext uc_mcontext;
-	sigset_t	  uc_sigmask;	/* mask last for extensibility */
-};
-
-#endif
diff --git a/arch/h8300/include/asm/unaligned.h b/arch/h8300/include/asm/unaligned.h
deleted file mode 100644
index b8d06c70c2da..000000000000
--- a/arch/h8300/include/asm/unaligned.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASM_H8300_UNALIGNED_H
-#define _ASM_H8300_UNALIGNED_H
-
-#include <linux/unaligned/be_memmove.h>
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned	__get_unaligned_be
-#define put_unaligned	__put_unaligned_be
-
-#endif /* _ASM_H8300_UNALIGNED_H */
diff --git a/arch/h8300/include/asm/unistd.h b/arch/h8300/include/asm/unistd.h
deleted file mode 100644
index ab671ecf5196..000000000000
--- a/arch/h8300/include/asm/unistd.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _ASM_H8300_UNISTD_H_
-#define _ASM_H8300_UNISTD_H_
-
-#include <uapi/asm/unistd.h>
-
-
-#define NR_syscalls 321
-
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_IPC
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLD_MMAP
-#define __ARCH_WANT_SYS_OLD_SELECT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_FORK
-#define __ARCH_WANT_SYS_VFORK
-#define __ARCH_WANT_SYS_CLONE
-
-#endif /* _ASM_H8300_UNISTD_H_ */
diff --git a/arch/h8300/include/asm/user.h b/arch/h8300/include/asm/user.h
deleted file mode 100644
index 14a9e18950f1..000000000000
--- a/arch/h8300/include/asm/user.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef _H8300_USER_H
-#define _H8300_USER_H
-
-#include <asm/page.h>
-
-/* Core file format: The core file is written in such a way that gdb
-   can understand it and provide useful information to the user (under
-   linux we use the 'trad-core' bfd).  There are quite a number of
-   obstacles to being able to view the contents of the floating point
-   registers, and until these are solved you will not be able to view the
-   contents of them.  Actually, you can read in the core file and look at
-   the contents of the user struct to find out what the floating point
-   registers contain.
-   The actual file contents are as follows:
-   UPAGE: 1 page consisting of a user struct that tells gdb what is present
-   in the file.  Directly after this is a copy of the task_struct, which
-   is currently not used by gdb, but it may come in useful at some point.
-   All of the registers are stored as part of the upage.  The upage should
-   always be only one page.
-   DATA: The data area is stored.  We use current->end_text to
-   current->brk to pick up all of the user variables, plus any memory
-   that may have been malloced.  No attempt is made to determine if a page
-   is demand-zero or if a page is totally unused, we just cover the entire
-   range.  All of the addresses are rounded in such a way that an integral
-   number of pages is written.
-   STACK: We need the stack information in order to get a meaningful
-   backtrace.  We need to write the data from (esp) to
-   current->start_stack, so we round each of these off in order to be able
-   to write an integer number of pages.
-   The minimum core file size is 3 pages, or 12288 bytes.
-*/
-
-/* This is the old layout of "struct pt_regs" as of Linux 1.x, and
-   is still the layout used by user (the new pt_regs doesn't have
-   all registers). */
-struct user_regs_struct {
-	long er1,er2,er3,er4,er5,er6;
-	long er0;
-	long usp;
-	long orig_er0;
-	short ccr;
-	long pc;
-};
-
-	
-/* When the kernel dumps core, it starts by dumping the user struct -
-   this will be used by gdb to figure out where the data and stack segments
-   are within the file, and what virtual addresses to use. */
-struct user{
-/* We start with the registers, to mimic the way that "memory" is returned
-   from the ptrace(3,...) function.  */
-  struct user_regs_struct regs;	/* Where the registers are actually stored */
-/* ptrace does not yet supply these.  Someday.... */
-/* The rest of this junk is to help gdb figure out what goes where */
-  unsigned long int u_tsize;	/* Text segment size (pages). */
-  unsigned long int u_dsize;	/* Data segment size (pages). */
-  unsigned long int u_ssize;	/* Stack segment size (pages). */
-  unsigned long start_code;     /* Starting virtual address of text. */
-  unsigned long start_stack;	/* Starting virtual address of stack area.
-				   This is actually the bottom of the stack,
-				   the top of the stack is always found in the
-				   esp register.  */
-  long int signal;     		/* Signal that caused the core dump. */
-  int reserved;			/* No longer used */
-  unsigned long u_ar0;		/* Used by gdb to help find the values for */
-				/* the registers. */
-  unsigned long magic;		/* To uniquely identify a core file */
-  char u_comm[32];		/* User command that was responsible */
-};
-#define NBPG PAGE_SIZE
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-
-#endif
diff --git a/arch/h8300/include/asm/virtconvert.h b/arch/h8300/include/asm/virtconvert.h
deleted file mode 100644
index 19cfd62b11c3..000000000000
--- a/arch/h8300/include/asm/virtconvert.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __H8300_VIRT_CONVERT__
-#define __H8300_VIRT_CONVERT__
-
-/*
- * Macros used for converting between virtual and physical mappings.
- */
-
-#ifdef __KERNEL__
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-#define phys_to_virt(vaddr)	((void *) (vaddr))
-#define virt_to_phys(vaddr)	((unsigned long) (vaddr))
-
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-#endif
-#endif
diff --git a/arch/h8300/include/uapi/asm/Kbuild b/arch/h8300/include/uapi/asm/Kbuild
deleted file mode 100644
index 040178cdb3eb..000000000000
--- a/arch/h8300/include/uapi/asm/Kbuild
+++ /dev/null
@@ -1,34 +0,0 @@
-# UAPI Header export list
-include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/h8300/include/uapi/asm/auxvec.h b/arch/h8300/include/uapi/asm/auxvec.h
deleted file mode 100644
index 1d36fe38b088..000000000000
--- a/arch/h8300/include/uapi/asm/auxvec.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASMH8300_AUXVEC_H
-#define __ASMH8300_AUXVEC_H
-
-#endif
diff --git a/arch/h8300/include/uapi/asm/bitsperlong.h b/arch/h8300/include/uapi/asm/bitsperlong.h
deleted file mode 100644
index 6dc0bb0c13b2..000000000000
--- a/arch/h8300/include/uapi/asm/bitsperlong.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/bitsperlong.h>
diff --git a/arch/h8300/include/uapi/asm/byteorder.h b/arch/h8300/include/uapi/asm/byteorder.h
deleted file mode 100644
index 13539da99efd..000000000000
--- a/arch/h8300/include/uapi/asm/byteorder.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _H8300_BYTEORDER_H
-#define _H8300_BYTEORDER_H
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _H8300_BYTEORDER_H */
diff --git a/arch/h8300/include/uapi/asm/errno.h b/arch/h8300/include/uapi/asm/errno.h
deleted file mode 100644
index 0c2f5641fdcc..000000000000
--- a/arch/h8300/include/uapi/asm/errno.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _H8300_ERRNO_H
-#define _H8300_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif /* _H8300_ERRNO_H */
diff --git a/arch/h8300/include/uapi/asm/fcntl.h b/arch/h8300/include/uapi/asm/fcntl.h
deleted file mode 100644
index 1952cb2e3b06..000000000000
--- a/arch/h8300/include/uapi/asm/fcntl.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _H8300_FCNTL_H
-#define _H8300_FCNTL_H
-
-#define O_DIRECTORY	040000	/* must be a directory */
-#define O_NOFOLLOW	0100000	/* don't follow links */
-#define O_DIRECT	0200000	/* direct disk access hint - currently ignored */
-#define O_LARGEFILE	0400000
-
-#include <asm-generic/fcntl.h>
-
-#endif /* _H8300_FCNTL_H */
diff --git a/arch/h8300/include/uapi/asm/ioctl.h b/arch/h8300/include/uapi/asm/ioctl.h
deleted file mode 100644
index b279fe06dfe5..000000000000
--- a/arch/h8300/include/uapi/asm/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/arch/h8300/include/uapi/asm/ioctls.h b/arch/h8300/include/uapi/asm/ioctls.h
deleted file mode 100644
index 30eaed2facdb..000000000000
--- a/arch/h8300/include/uapi/asm/ioctls.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ARCH_H8300_IOCTLS_H__
-#define __ARCH_H8300_IOCTLS_H__
-
-#define FIOQSIZE	0x545E
-
-#include <asm-generic/ioctls.h>
-
-#endif /* __ARCH_H8300_IOCTLS_H__ */
diff --git a/arch/h8300/include/uapi/asm/ipcbuf.h b/arch/h8300/include/uapi/asm/ipcbuf.h
deleted file mode 100644
index 84c7e51cb6d0..000000000000
--- a/arch/h8300/include/uapi/asm/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ipcbuf.h>
diff --git a/arch/h8300/include/uapi/asm/kvm_para.h b/arch/h8300/include/uapi/asm/kvm_para.h
deleted file mode 100644
index 14fab8f0b957..000000000000
--- a/arch/h8300/include/uapi/asm/kvm_para.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kvm_para.h>
diff --git a/arch/h8300/include/uapi/asm/mman.h b/arch/h8300/include/uapi/asm/mman.h
deleted file mode 100644
index 8eebf89f5ab1..000000000000
--- a/arch/h8300/include/uapi/asm/mman.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/mman.h>
diff --git a/arch/h8300/include/uapi/asm/msgbuf.h b/arch/h8300/include/uapi/asm/msgbuf.h
deleted file mode 100644
index 6b148cd09aa5..000000000000
--- a/arch/h8300/include/uapi/asm/msgbuf.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _H8300_MSGBUF_H
-#define _H8300_MSGBUF_H
-
-/* 
- * The msqid64_ds structure for H8/300 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	unsigned long	__unused1;
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	unsigned long	__unused2;
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long	__unused3;
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-#endif /* _H8300_MSGBUF_H */
diff --git a/arch/h8300/include/uapi/asm/param.h b/arch/h8300/include/uapi/asm/param.h
deleted file mode 100644
index 3dd18ae15f03..000000000000
--- a/arch/h8300/include/uapi/asm/param.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _UAPI_H8300_PARAM_H
-#define _UAPI_H8300_PARAM_H
-
-#ifndef __KERNEL__
-#define HZ		100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif /* _UAPI_H8300_PARAM_H */
diff --git a/arch/h8300/include/uapi/asm/poll.h b/arch/h8300/include/uapi/asm/poll.h
deleted file mode 100644
index f61540c22d94..000000000000
--- a/arch/h8300/include/uapi/asm/poll.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __H8300_POLL_H
-#define __H8300_POLL_H
-
-#define POLLWRNORM	POLLOUT
-#define POLLWRBAND	256
-
-#include <asm-generic/poll.h>
-
-#undef POLLREMOVE
-
-#endif
diff --git a/arch/h8300/include/uapi/asm/posix_types.h b/arch/h8300/include/uapi/asm/posix_types.h
deleted file mode 100644
index 91e62ba4c7b0..000000000000
--- a/arch/h8300/include/uapi/asm/posix_types.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef __ARCH_H8300_POSIX_TYPES_H
-#define __ARCH_H8300_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned short	__kernel_mode_t;
-#define __kernel_mode_t __kernel_mode_t
-
-typedef unsigned short	__kernel_ipc_pid_t;
-#define __kernel_ipc_pid_t __kernel_ipc_pid_t
-
-typedef unsigned short	__kernel_uid_t;
-typedef unsigned short	__kernel_gid_t;
-#define __kernel_uid_t __kernel_uid_t
-
-typedef unsigned short	__kernel_old_uid_t;
-typedef unsigned short	__kernel_old_gid_t;
-#define __kernel_old_uid_t __kernel_old_uid_t
-
-#include <asm-generic/posix_types.h>
-
-#endif
diff --git a/arch/h8300/include/uapi/asm/ptrace.h b/arch/h8300/include/uapi/asm/ptrace.h
deleted file mode 100644
index ef39ec5977b6..000000000000
--- a/arch/h8300/include/uapi/asm/ptrace.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _UAPI_H8300_PTRACE_H
-#define _UAPI_H8300_PTRACE_H
-
-#ifndef __ASSEMBLY__
-
-#define PT_ER1	   0
-#define PT_ER2	   1
-#define PT_ER3	   2
-#define PT_ER4	   3
-#define PT_ER5	   4
-#define PT_ER6	   5
-#define PT_ER0	   6
-#define PT_ORIG_ER0	   7
-#define PT_CCR	   8
-#define PT_PC	   9
-#define PT_USP	   10
-#define PT_EXR     12
-
-/* this struct defines the way the registers are stored on the
-   stack during a system call. */
-
-struct pt_regs {
-	long     retpc;
-	long     er4;
-	long     er5;
-	long     er6;
-	long     er3;
-	long     er2;
-	long     er1;
-	long     orig_er0;
-	unsigned short ccr;
-	long     er0;
-	long     vector;
-#if defined(CONFIG_CPU_H8S)
-	unsigned short exr;
-#endif
-	unsigned long  pc;
-} __attribute__((aligned(2),packed));
-
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13
-
-#endif /* __ASSEMBLY__ */
-#endif /* _UAPI_H8300_PTRACE_H */
diff --git a/arch/h8300/include/uapi/asm/resource.h b/arch/h8300/include/uapi/asm/resource.h
deleted file mode 100644
index 46c5f4391607..000000000000
--- a/arch/h8300/include/uapi/asm/resource.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _H8300_RESOURCE_H
-#define _H8300_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif /* _H8300_RESOURCE_H */
diff --git a/arch/h8300/include/uapi/asm/sembuf.h b/arch/h8300/include/uapi/asm/sembuf.h
deleted file mode 100644
index e04a3ec0cb92..000000000000
--- a/arch/h8300/include/uapi/asm/sembuf.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _H8300_SEMBUF_H
-#define _H8300_SEMBUF_H
-
-/* 
- * The semid64_ds structure for m68k architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-	unsigned long	__unused1;
-	__kernel_time_t	sem_ctime;		/* last change time */
-	unsigned long	__unused2;
-	unsigned long	sem_nsems;		/* no. of semaphores in array */
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _H8300_SEMBUF_H */
diff --git a/arch/h8300/include/uapi/asm/setup.h b/arch/h8300/include/uapi/asm/setup.h
deleted file mode 100644
index e2c600e96733..000000000000
--- a/arch/h8300/include/uapi/asm/setup.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __H8300_SETUP_H
-#define __H8300_SETUP_H
-
-#define COMMAND_LINE_SIZE	512
-
-#endif
diff --git a/arch/h8300/include/uapi/asm/shmbuf.h b/arch/h8300/include/uapi/asm/shmbuf.h
deleted file mode 100644
index 64e77993a7a9..000000000000
--- a/arch/h8300/include/uapi/asm/shmbuf.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _H8300_SHMBUF_H
-#define _H8300_SHMBUF_H
-
-/* 
- * The shmid64_ds structure for m68k architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-	unsigned long		__unused1;
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	unsigned long		__unused2;
-	__kernel_time_t		shm_ctime;	/* last change time */
-	unsigned long		__unused3;
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _H8300_SHMBUF_H */
diff --git a/arch/h8300/include/uapi/asm/sigcontext.h b/arch/h8300/include/uapi/asm/sigcontext.h
deleted file mode 100644
index e4b81505f8f8..000000000000
--- a/arch/h8300/include/uapi/asm/sigcontext.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _ASM_H8300_SIGCONTEXT_H
-#define _ASM_H8300_SIGCONTEXT_H
-
-struct sigcontext {
-	unsigned long  sc_mask; 	/* old sigmask */
-	unsigned long  sc_usp;		/* old user stack pointer */
-	unsigned long  sc_er0;
-	unsigned long  sc_er1;
-	unsigned long  sc_er2;
-	unsigned long  sc_er3;
-	unsigned long  sc_er4;
-	unsigned long  sc_er5;
-	unsigned long  sc_er6;
-	unsigned short sc_ccr;
-	unsigned long  sc_pc;
-};
-
-#endif
diff --git a/arch/h8300/include/uapi/asm/siginfo.h b/arch/h8300/include/uapi/asm/siginfo.h
deleted file mode 100644
index bc8fbea931a5..000000000000
--- a/arch/h8300/include/uapi/asm/siginfo.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _H8300_SIGINFO_H
-#define _H8300_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif
diff --git a/arch/h8300/include/uapi/asm/signal.h b/arch/h8300/include/uapi/asm/signal.h
deleted file mode 100644
index af3a6c37fee6..000000000000
--- a/arch/h8300/include/uapi/asm/signal.h
+++ /dev/null
@@ -1,115 +0,0 @@
-#ifndef _UAPI_H8300_SIGNAL_H
-#define _UAPI_H8300_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-#ifndef __KERNEL__
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002 /* not supported yet */
-#define SA_SIGINFO	0x00000004
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-#define SA_RESTORER	0x04000000
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal-defs.h>
-
-#ifndef __KERNEL__
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-	  __sighandler_t _sa_handler;
-	  void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-
-#endif /* _UAPI_H8300_SIGNAL_H */
diff --git a/arch/h8300/include/uapi/asm/socket.h b/arch/h8300/include/uapi/asm/socket.h
deleted file mode 100644
index 9490758c5e2b..000000000000
--- a/arch/h8300/include/uapi/asm/socket.h
+++ /dev/null
@@ -1,79 +0,0 @@
-#ifndef _ASM_SOCKET_H
-#define _ASM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockoptions(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-#define SO_REUSEPORT	15
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE	25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
-#define SO_GET_FILTER		SO_ATTACH_FILTER
-
-#define SO_PEERNAME             28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#define SO_TIMESTAMPING		37
-#define SCM_TIMESTAMPING	SO_TIMESTAMPING
-
-#define SO_PROTOCOL		38
-#define SO_DOMAIN		39
-
-#define SO_RXQ_OVFL             40
-
-#define SO_WIFI_STATUS		41
-#define SCM_WIFI_STATUS		SO_WIFI_STATUS
-#define SO_PEEK_OFF		42
-
-/* Instruct lower device to use last 4-bytes of skb data as FCS */
-#define SO_NOFCS		43
-
-#define SO_LOCK_FILTER		44
-
-#define SO_SELECT_ERR_QUEUE	45
-
-#define SO_BUSY_POLL		46
-
-#endif /* _ASM_SOCKET_H */
diff --git a/arch/h8300/include/uapi/asm/sockios.h b/arch/h8300/include/uapi/asm/sockios.h
deleted file mode 100644
index e9c7ec810c23..000000000000
--- a/arch/h8300/include/uapi/asm/sockios.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ARCH_H8300_SOCKIOS__
-#define __ARCH_H8300_SOCKIOS__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif /* __ARCH_H8300_SOCKIOS__ */
diff --git a/arch/h8300/include/uapi/asm/stat.h b/arch/h8300/include/uapi/asm/stat.h
deleted file mode 100644
index 62c3cc24dfe6..000000000000
--- a/arch/h8300/include/uapi/asm/stat.h
+++ /dev/null
@@ -1,78 +0,0 @@
-#ifndef _H8300_STAT_H
-#define _H8300_STAT_H
-
-struct __old_kernel_stat {
-	unsigned short st_dev;
-	unsigned short st_ino;
-	unsigned short st_mode;
-	unsigned short st_nlink;
-	unsigned short st_uid;
-	unsigned short st_gid;
-	unsigned short st_rdev;
-	unsigned long  st_size;
-	unsigned long  st_atime;
-	unsigned long  st_mtime;
-	unsigned long  st_ctime;
-};
-
-struct stat {
-	unsigned short st_dev;
-	unsigned short __pad1;
-	unsigned long st_ino;
-	unsigned short st_mode;
-	unsigned short st_nlink;
-	unsigned short st_uid;
-	unsigned short st_gid;
-	unsigned short st_rdev;
-	unsigned short __pad2;
-	unsigned long  st_size;
-	unsigned long  st_blksize;
-	unsigned long  st_blocks;
-	unsigned long  st_atime;
-	unsigned long  __unused1;
-	unsigned long  st_mtime;
-	unsigned long  __unused2;
-	unsigned long  st_ctime;
-	unsigned long  __unused3;
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
-	unsigned long long	st_dev;
-	unsigned char	__pad1[2];
-
-#define STAT64_HAS_BROKEN_ST_INO	1
-	unsigned long	__st_ino;
-
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-
-	unsigned long	st_uid;
-	unsigned long	st_gid;
-
-	unsigned long long	st_rdev;
-	unsigned char	__pad3[2];
-
-	long long	st_size;
-	unsigned long	st_blksize;
-
-	unsigned long	__pad4;		/* future possible st_blocks high bits */
-	unsigned long	st_blocks;	/* Number 512-byte blocks allocated. */
-
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-
-	unsigned long	st_ctime;
-	unsigned long	st_ctime_nsec;
-
-	unsigned long long	st_ino;
-};
-
-#endif /* _H8300_STAT_H */
diff --git a/arch/h8300/include/uapi/asm/statfs.h b/arch/h8300/include/uapi/asm/statfs.h
deleted file mode 100644
index b96efa712aac..000000000000
--- a/arch/h8300/include/uapi/asm/statfs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _H8300_STATFS_H
-#define _H8300_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif /* _H8300_STATFS_H */
diff --git a/arch/h8300/include/uapi/asm/swab.h b/arch/h8300/include/uapi/asm/swab.h
deleted file mode 100644
index 39abbf52807d..000000000000
--- a/arch/h8300/include/uapi/asm/swab.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _H8300_SWAB_H
-#define _H8300_SWAB_H
-
-#include <linux/types.h>
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __SWAB_64_THRU_32__
-#endif
-
-#endif /* _H8300_SWAB_H */
diff --git a/arch/h8300/include/uapi/asm/termbits.h b/arch/h8300/include/uapi/asm/termbits.h
deleted file mode 100644
index 3287a6244d74..000000000000
--- a/arch/h8300/include/uapi/asm/termbits.h
+++ /dev/null
@@ -1,201 +0,0 @@
-#ifndef __ARCH_H8300_TERMBITS_H__
-#define __ARCH_H8300_TERMBITS_H__
-
-#include <linux/posix_types.h>
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-};
-
-struct termios2 {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
-
-/* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define   CS5	0000000
-#define   CS6	0000020
-#define   CS7	0000040
-#define   CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX 0010000
-#define    BOTHER 0010000
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD	  002003600000		/* input baud rate */
-#define CMSPAR	  010000000000		/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000		/* flow control */
-
-#define IBSHIFT	  16			/* shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-#define EXTPROC	0200000
-
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif /* __ARCH_H8300_TERMBITS_H__ */
diff --git a/arch/h8300/include/uapi/asm/termios.h b/arch/h8300/include/uapi/asm/termios.h
deleted file mode 100644
index 5a67d7e38843..000000000000
--- a/arch/h8300/include/uapi/asm/termios.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _UAPI_H8300_TERMIOS_H
-#define _UAPI_H8300_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
- 
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-
-#endif /* _UAPI_H8300_TERMIOS_H */
diff --git a/arch/h8300/include/uapi/asm/types.h b/arch/h8300/include/uapi/asm/types.h
deleted file mode 100644
index 9ec9d4c5ac4d..000000000000
--- a/arch/h8300/include/uapi/asm/types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/int-ll64.h>
diff --git a/arch/h8300/include/uapi/asm/unistd.h b/arch/h8300/include/uapi/asm/unistd.h
deleted file mode 100644
index 8cb5d429f840..000000000000
--- a/arch/h8300/include/uapi/asm/unistd.h
+++ /dev/null
@@ -1,330 +0,0 @@
-#ifndef _UAPI_ASM_H8300_UNISTD_H_
-#define _UAPI_ASM_H8300_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall      0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_lchown		 16
-#define __NR_break		 17
-#define __NR_oldstat		 18
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_oldfstat		 28
-#define __NR_pause		 29
-#define __NR_utime		 30
-#define __NR_stty		 31
-#define __NR_gtty		 32
-#define __NR_access		 33
-#define __NR_nice		 34
-#define __NR_ftime		 35
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_prof		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-#define __NR_lock		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_mpx		 56
-#define __NR_setpgid		 57
-#define __NR_ulimit		 58
-#define __NR_oldolduname	 59
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_oldlstat		 84
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-#define __NR_mmap		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-#define __NR_profil		 98
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-#define __NR_ioperm		101
-#define __NR_socketcall		102
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-#define __NR_olduname		109
-#define __NR_iopl		110
-#define __NR_vhangup		111
-#define __NR_idle		112
-#define __NR_vm86old		113
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-#define __NR_modify_ldt		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-#define __NR_create_module	127
-#define __NR_init_module	128
-#define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR__newselect		142
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_vm86		166
-#define __NR_query_module	167
-#define __NR_poll		168
-#define __NR_nfsservctl		169
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_prctl		172
-#define __NR_rt_sigreturn	173
-#define __NR_rt_sigaction	174
-#define __NR_rt_sigprocmask	175
-#define __NR_rt_sigpending	176
-#define __NR_rt_sigtimedwait	177
-#define __NR_rt_sigqueueinfo	178
-#define __NR_rt_sigsuspend	179
-#define __NR_pread64		180
-#define __NR_pwrite64		181
-#define __NR_chown		182
-#define __NR_getcwd		183
-#define __NR_capget		184
-#define __NR_capset		185
-#define __NR_sigaltstack	186
-#define __NR_sendfile		187
-#define __NR_getpmsg		188	/* some people actually want streams */
-#define __NR_putpmsg		189	/* some people actually want streams */
-#define __NR_vfork		190
-#define __NR_ugetrlimit		191
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_lchown32		198
-#define __NR_getuid32		199
-#define __NR_getgid32		200
-#define __NR_geteuid32		201
-#define __NR_getegid32		202
-#define __NR_setreuid32		203
-#define __NR_setregid32		204
-#define __NR_getgroups32	205
-#define __NR_setgroups32	206
-#define __NR_fchown32		207
-#define __NR_setresuid32	208
-#define __NR_getresuid32	209
-#define __NR_setresgid32	210
-#define __NR_getresgid32	211
-#define __NR_chown32		212
-#define __NR_setuid32		213
-#define __NR_setgid32		214
-#define __NR_setfsuid32		215
-#define __NR_setfsgid32		216
-#define __NR_pivot_root		217
-#define __NR_mincore		218
-#define __NR_madvise		219
-#define __NR_madvise1		219
-#define __NR_getdents64		220
-#define __NR_fcntl64		221
-/* 223 is unused */
-#define __NR_gettid		224
-#define __NR_readahead		225
-#define __NR_setxattr		226
-#define __NR_lsetxattr		227
-#define __NR_fsetxattr		228
-#define __NR_getxattr		229
-#define __NR_lgetxattr		230
-#define __NR_fgetxattr		231
-#define __NR_listxattr		232
-#define __NR_llistxattr		233
-#define __NR_flistxattr		234
-#define __NR_removexattr	235
-#define __NR_lremovexattr	236
-#define __NR_fremovexattr	237
-#define __NR_tkill		238
-#define __NR_sendfile64		239
-#define __NR_futex		240
-#define __NR_sched_setaffinity	241
-#define __NR_sched_getaffinity	242
-#define __NR_set_thread_area	243
-#define __NR_get_thread_area	244
-#define __NR_io_setup		245
-#define __NR_io_destroy		246
-#define __NR_io_getevents	247
-#define __NR_io_submit		248
-#define __NR_io_cancel		249
-#define __NR_fadvise64		250
-/* 251 is available for reuse (was briefly sys_set_zone_reclaim) */
-#define __NR_exit_group		252
-#define __NR_lookup_dcookie	253
-#define __NR_epoll_create	254
-#define __NR_epoll_ctl		255
-#define __NR_epoll_wait		256
-#define __NR_remap_file_pages	257
-#define __NR_set_tid_address	258
-#define __NR_timer_create	259
-#define __NR_timer_settime	(__NR_timer_create+1)
-#define __NR_timer_gettime	(__NR_timer_create+2)
-#define __NR_timer_getoverrun	(__NR_timer_create+3)
-#define __NR_timer_delete	(__NR_timer_create+4)
-#define __NR_clock_settime	(__NR_timer_create+5)
-#define __NR_clock_gettime	(__NR_timer_create+6)
-#define __NR_clock_getres	(__NR_timer_create+7)
-#define __NR_clock_nanosleep	(__NR_timer_create+8)
-#define __NR_statfs64		268
-#define __NR_fstatfs64		269
-#define __NR_tgkill		270
-#define __NR_utimes		271
-#define __NR_fadvise64_64	272
-#define __NR_vserver		273
-#define __NR_mbind		274
-#define __NR_get_mempolicy	275
-#define __NR_set_mempolicy	276
-#define __NR_mq_open 		277
-#define __NR_mq_unlink		(__NR_mq_open+1)
-#define __NR_mq_timedsend	(__NR_mq_open+2)
-#define __NR_mq_timedreceive	(__NR_mq_open+3)
-#define __NR_mq_notify		(__NR_mq_open+4)
-#define __NR_mq_getsetattr	(__NR_mq_open+5)
-#define __NR_kexec_load		283
-#define __NR_waitid		284
-/* #define __NR_sys_setaltroot	285 */
-#define __NR_add_key		286
-#define __NR_request_key	287
-#define __NR_keyctl		288
-#define __NR_ioprio_set		289
-#define __NR_ioprio_get		290
-#define __NR_inotify_init	291
-#define __NR_inotify_add_watch	292
-#define __NR_inotify_rm_watch	293
-#define __NR_migrate_pages	294
-#define __NR_openat		295
-#define __NR_mkdirat		296
-#define __NR_mknodat		297
-#define __NR_fchownat		298
-#define __NR_futimesat		299
-#define __NR_fstatat64		300
-#define __NR_unlinkat		301
-#define __NR_renameat		302
-#define __NR_linkat		303
-#define __NR_symlinkat		304
-#define __NR_readlinkat		305
-#define __NR_fchmodat		306
-#define __NR_faccessat		307
-#define __NR_pselect6		308
-#define __NR_ppoll		309
-#define __NR_unshare		310
-#define __NR_set_robust_list	311
-#define __NR_get_robust_list	312
-#define __NR_splice		313
-#define __NR_sync_file_range	314
-#define __NR_tee		315
-#define __NR_vmsplice		316
-#define __NR_move_pages		317
-#define __NR_getcpu		318
-#define __NR_epoll_pwait	319
-#define __NR_setns		320
-
-#endif /* _UAPI_ASM_H8300_UNISTD_H_ */
diff --git a/arch/h8300/kernel/Makefile b/arch/h8300/kernel/Makefile
deleted file mode 100644
index 1cc57f872d34..000000000000
--- a/arch/h8300/kernel/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-y := vmlinux.lds
-
-obj-y := process.o traps.o ptrace.o irq.o \
-	 sys_h8300.o time.o signal.o \
-         setup.o gpio.o syscalls.o \
-	 entry.o timer/
-
-obj-$(CONFIG_MODULES) += module.o h8300_ksyms.o 
diff --git a/arch/h8300/kernel/asm-offsets.c b/arch/h8300/kernel/asm-offsets.c
deleted file mode 100644
index fd961e0bd741..000000000000
--- a/arch/h8300/kernel/asm-offsets.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- */
-
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/ptrace.h>
-#include <linux/hardirq.h>
-#include <linux/kbuild.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/ptrace.h>
-
-int main(void)
-{
-	/* offsets into the task struct */
-	DEFINE(TASK_STATE, offsetof(struct task_struct, state));
-	DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
-	DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
-	DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
-	DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
-	DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack));
-	DEFINE(TASK_MM, offsetof(struct task_struct, mm));
-	DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
-
-	/* offsets into the irq_cpustat_t struct */
-	DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
-
-	/* offsets into the thread struct */
-	DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
-	DEFINE(THREAD_USP, offsetof(struct thread_struct, usp));
-	DEFINE(THREAD_CCR, offsetof(struct thread_struct, ccr));
-
-	/* offsets into the pt_regs struct */
-	DEFINE(LER0,  offsetof(struct pt_regs, er0)      - sizeof(long));
-	DEFINE(LER1,  offsetof(struct pt_regs, er1)      - sizeof(long));
-	DEFINE(LER2,  offsetof(struct pt_regs, er2)      - sizeof(long));
-	DEFINE(LER3,  offsetof(struct pt_regs, er3)      - sizeof(long));
-	DEFINE(LER4,  offsetof(struct pt_regs, er4)      - sizeof(long));
-	DEFINE(LER5,  offsetof(struct pt_regs, er5)      - sizeof(long));
-	DEFINE(LER6,  offsetof(struct pt_regs, er6)      - sizeof(long));
-	DEFINE(LORIG, offsetof(struct pt_regs, orig_er0) - sizeof(long));
-	DEFINE(LCCR,  offsetof(struct pt_regs, ccr)      - sizeof(long));
-	DEFINE(LVEC,  offsetof(struct pt_regs, vector)   - sizeof(long));
-#if defined(__H8300S__)
-	DEFINE(LEXR,  offsetof(struct pt_regs, exr)      - sizeof(long));
-#endif
-	DEFINE(LRET,  offsetof(struct pt_regs, pc)       - sizeof(long));
-
-	DEFINE(PT_PTRACED, PT_PTRACED);
-
-	return 0;
-}
diff --git a/arch/h8300/kernel/entry.S b/arch/h8300/kernel/entry.S
deleted file mode 100644
index 94bd30f11df6..000000000000
--- a/arch/h8300/kernel/entry.S
+++ /dev/null
@@ -1,402 +0,0 @@
-/* -*- mode: asm -*-
- *
- *  linux/arch/h8300/platform/h8300h/entry.S
- *
- *  Yoshinori Sato <ysato@users.sourceforge.jp>
- *  David McCullough <davidm@snapgear.com>
- *
- */
-
-/*
- *  entry.S
- *  include exception/interrupt gateway
- *          system call entry
- */
-
-#include <linux/sys.h>
-#include <asm/unistd.h>
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <asm/errno.h>
-
-#if defined(CONFIG_CPU_H8300H)
-#define USERRET 8
-INTERRUPTS = 64
-	.h8300h
-	.macro	SHLL2 reg
-	shll.l	\reg
-	shll.l	\reg
-	.endm
-	.macro	SHLR2 reg
-	shlr.l	\reg
-	shlr.l	\reg
-	.endm
-	.macro	SAVEREGS
-	mov.l	er0,@-sp
-	mov.l	er1,@-sp
-	mov.l	er2,@-sp
-	mov.l	er3,@-sp
-	.endm
-	.macro	RESTOREREGS
-	mov.l	@sp+,er3
-	mov.l	@sp+,er2
-	.endm
-	.macro	SAVEEXR
-	.endm
-	.macro	RESTOREEXR
-	.endm
-#endif
-#if defined(CONFIG_CPU_H8S)
-#define USERRET 10
-#define USEREXR 8
-INTERRUPTS = 128
-	.h8300s
-	.macro	SHLL2 reg
-	shll.l	#2,\reg
-	.endm
-	.macro	SHLR2 reg
-	shlr.l	#2,\reg
-	.endm
-	.macro	SAVEREGS
-	stm.l	er0-er3,@-sp
-	.endm
-	.macro	RESTOREREGS
-	ldm.l	@sp+,er2-er3
-	.endm
-	.macro	SAVEEXR
-	mov.w	@(USEREXR:16,er0),r1
-	mov.w	r1,@(LEXR-LER3:16,sp)		/* copy EXR */
-	.endm
-	.macro	RESTOREEXR
-	mov.w	@(LEXR-LER1:16,sp),r1		/* restore EXR */
-	mov.b	r1l,r1h
-	mov.w	r1,@(USEREXR:16,er0)
-	.endm
-#endif
-
-
-/* CPU context save/restore macros. */
-
-	.macro	SAVE_ALL
-	mov.l	er0,@-sp
-	stc	ccr,r0l				/* check kernel mode */
-	btst	#4,r0l
-	bne	5f
-
-	/* user mode */
-	mov.l	sp,@_sw_usp
-	mov.l	@sp,er0				/* restore saved er0 */
-	orc	#0x10,ccr			/* switch kernel stack */
-	mov.l	@_sw_ksp,sp
-	sub.l	#(LRET-LORIG),sp		/* allocate LORIG - LRET */
-	SAVEREGS
-	mov.l   @_sw_usp,er0
-	mov.l   @(USERRET:16,er0),er1           /* copy the RET addr */
-	mov.l   er1,@(LRET-LER3:16,sp)
-	SAVEEXR
-
-	mov.l	@(LORIG-LER3:16,sp),er0
-	mov.l	er0,@(LER0-LER3:16,sp)		/* copy ER0 */
-	mov.w	e1,r1				/* e1 highbyte = ccr */
-	and	#0xef,r1h			/* mask mode? flag */
-	bra	6f
-5:
-	/* kernel mode */
-	mov.l	@sp,er0				/* restore saved er0 */
-	subs	#2,sp				/* set dummy ccr */
-	SAVEREGS
-	mov.w	@(LRET-LER3:16,sp),r1		/* copy old ccr */
-6:
-	mov.b	r1h,r1l
-	mov.b	#0,r1h
-	mov.w	r1,@(LCCR-LER3:16,sp)		/* set ccr */
-	mov.l	er6,@-sp			/* syscall arg #6 */
-	mov.l	er5,@-sp			/* syscall arg #5 */
-	mov.l	er4,@-sp			/* syscall arg #4 */
-	.endm					/* r1 = ccr */
-
-	.macro	RESTORE_ALL
-	mov.l	@sp+,er4
-	mov.l	@sp+,er5
-	mov.l	@sp+,er6
-	RESTOREREGS
-	mov.w	@(LCCR-LER1:16,sp),r0		/* check kernel mode */
-	btst	#4,r0l
-	bne	7f
-
-	orc	#0x80,ccr
-	mov.l	@_sw_usp,er0
-	mov.l	@(LER0-LER1:16,sp),er1		/* restore ER0 */
-	mov.l	er1,@er0
-	RESTOREEXR
-	mov.w	@(LCCR-LER1:16,sp),r1		/* restore the RET addr */
-	mov.b	r1l,r1h
-	mov.b	@(LRET+1-LER1:16,sp),r1l
-	mov.w	r1,e1
-	mov.w	@(LRET+2-LER1:16,sp),r1
-	mov.l	er1,@(USERRET:16,er0)
-
-	mov.l	@sp+,er1
-	add.l	#(LRET-LER1),sp			/* remove LORIG - LRET */
-	mov.l	sp,@_sw_ksp
-	andc	#0xef,ccr			/* switch to user mode */
-	mov.l	er0,sp
-	bra	8f
-7:
-	mov.l	@sp+,er1
-	adds	#4,sp
-	adds	#2,sp
-8:
-	mov.l	@sp+,er0
-	adds	#4,sp				/* remove the sw created LVEC */
-	rte
-	.endm
-
-.globl _system_call
-.globl _ret_from_exception
-.globl _ret_from_fork
-.globl _ret_from_kernel_thread
-.globl _ret_from_interrupt
-.globl _interrupt_redirect_table
-.globl _sw_ksp,_sw_usp
-.globl _resume
-.globl _interrupt_entry
-.globl _trace_break
-
-#if defined(CONFIG_ROMKERNEL)
-	.section .int_redirect,"ax"
-_interrupt_redirect_table:
-#if defined(CONFIG_CPU_H8300H)
-	.rept	7
-	.long	0
-	.endr
-#endif
-#if defined(CONFIG_CPU_H8S)
-	.rept	5
-	.long	0
-	.endr
-	jmp	@_trace_break
-	.long	0
-#endif
-
-	jsr	@_interrupt_entry		/* NMI */
-	jmp	@_system_call			/* TRAPA #0 (System call) */
-	.long	0
-	.long	0
-	jmp	@_trace_break			/* TRAPA #3 (breakpoint) */
-	.rept	INTERRUPTS-12
-	jsr	@_interrupt_entry
-	.endr
-#endif
-#if defined(CONFIG_RAMKERNEL)
-.globl _interrupt_redirect_table
-	.section .bss
-_interrupt_redirect_table:
-	.space	4
-#endif
-
-	.section .text
-	.align	2
-_interrupt_entry:
-	SAVE_ALL
-	mov.l	sp,er0
-	add.l	#LVEC,er0
-	btst	#4,r1l
-	bne	1f
-	/* user LVEC */
-	mov.l	@_sw_usp,er0
-	adds	#4,er0
-1:
-	mov.l	@er0,er0			/* LVEC address */
-#if defined(CONFIG_ROMKERNEL)
-	sub.l	#_interrupt_redirect_table,er0
-#endif
-#if defined(CONFIG_RAMKERNEL)
-	mov.l	@_interrupt_redirect_table,er1
-	sub.l	er1,er0
-#endif
-	SHLR2	er0
-	dec.l	#1,er0
-	mov.l	sp,er1
-	subs	#4,er1				/* adjust ret_pc */
-	jsr	@_do_IRQ
-	jmp	@_ret_from_interrupt
-
-_system_call:
-	subs	#4,sp				/* dummy LVEC */
-	SAVE_ALL
-	andc	#0x7f,ccr
-	mov.l	er0,er4
-
-	/* save top of frame */
-	mov.l	sp,er0
-	jsr	@_set_esp0
-	mov.l	sp,er2
-	and.w	#0xe000,r2
-	mov.b	@((TI_FLAGS+3-(TIF_SYSCALL_TRACE >> 3)):16,er2),r2l
-	btst	#(TIF_SYSCALL_TRACE & 7),r2l
-	beq	1f
-	jsr	@_do_syscall_trace
-1:
-	cmp.l	#NR_syscalls,er4
-	bcc	badsys
-	SHLL2	er4
-	mov.l	#_sys_call_table,er0
-	add.l	er4,er0
-	mov.l	@er0,er4
-	beq	_ret_from_exception:16
-	mov.l	@(LER1:16,sp),er0
-	mov.l	@(LER2:16,sp),er1
-	mov.l	@(LER3:16,sp),er2
-	jsr	@er4
-	mov.l	er0,@(LER0:16,sp)		/* save the return value */
-	mov.l	sp,er2
-	and.w	#0xe000,r2
-	mov.b	@((TI_FLAGS+3-(TIF_SYSCALL_TRACE >> 3)):16,er2),r2l
-	btst	#(TIF_SYSCALL_TRACE & 7),r2l
-	beq	2f
-	jsr	@_do_syscall_trace
-2:
-#if defined(CONFIG_SYSCALL_PRINT)
-	jsr	@_syscall_print
-#endif
-	orc	#0x80,ccr
-	bra	resume_userspace
-
-badsys:
-	mov.l	#-ENOSYS,er0
-	mov.l	er0,@(LER0:16,sp)
-	bra	resume_userspace
-
-#if !defined(CONFIG_PREEMPT)
-#define resume_kernel restore_all
-#endif
-
-_ret_from_exception:
-#if defined(CONFIG_PREEMPT)
-	orc	#0x80,ccr
-#endif
-_ret_from_interrupt:
-	mov.b	@(LCCR+1:16,sp),r0l
-	btst	#4,r0l
-	bne	resume_kernel:8		/* return from kernel */
-resume_userspace:
-	andc	#0x7f,ccr
-	mov.l	sp,er4
-	and.w	#0xe000,r4		/* er4 <- current thread info */
-	mov.l	@(TI_FLAGS:16,er4),er1
-	and.l	#_TIF_WORK_MASK,er1
-	beq	restore_all:8
-work_pending:
-	btst	#TIF_NEED_RESCHED,r1l
-	bne	work_resched:8
-	/* work notifysig */
-	mov.l	sp,er0
-	subs	#4,er0			/* er0: pt_regs */
-	jsr	@_do_notify_resume
-	bra	restore_all:8
-work_resched:
-	mov.l	sp,er0
-	jsr	@_set_esp0
-	jsr	@_schedule
-	bra	resume_userspace:8
-restore_all:
-	RESTORE_ALL			/* Does RTE */
-
-#if defined(CONFIG_PREEMPT)
-resume_kernel:
-	mov.l	@(TI_PRE_COUNT:16,er4),er0
-	bne	restore_all:8
-need_resched:
-	mov.l	@(TI_FLAGS:16,er4),er0
-	btst	#TIF_NEED_RESCHED,r0l
-	beq	restore_all:8
-	mov.b	@(LCCR+1:16,sp),r0l	/* Interrupt Enabled? */
-	bmi	restore_all:8
-	mov.l	#PREEMPT_ACTIVE,er0
-	mov.l	er0,@(TI_PRE_COUNT:16,er4)
-	andc	#0x7f,ccr
-	mov.l	sp,er0
-	jsr	@_set_esp0
-	jsr	@_schedule
-	orc	#0x80,ccr
-	bra	need_resched:8
-#endif
-
-_ret_from_fork:
-	mov.l	er2,er0
-	jsr	@_schedule_tail
-	jmp	@_ret_from_exception
-
-_ret_from_kernel_thread:
-	mov.l	er2,er0
-	jsr	@_schedule_tail
-	mov.l	@(LER4:16,sp),er0
-	mov.l	@(LER5:16,sp),er1
-	jsr	@er1
-	jmp	@_ret_from_exception
-
-_resume:
-	/*
-	 * Beware - when entering resume, offset of tss is in d1,
-	 * prev (the current task) is in a0, next (the new task)
-	 * is in a1 and d2.b is non-zero if the mm structure is
-	 * shared between the tasks, so don't change these
-	 * registers until their contents are no longer needed.
-	 */
-
-	/* save sr */
-	sub.w	r3,r3
-	stc	ccr,r3l
-	mov.w	r3,@(THREAD_CCR+2:16,er0)
-
-	/* disable interrupts */
-	orc	#0x80,ccr
-	mov.l	@_sw_usp,er3
-	mov.l	er3,@(THREAD_USP:16,er0)
-	mov.l	sp,@(THREAD_KSP:16,er0)
-
-	/* Skip address space switching if they are the same. */
-	/* FIXME: what did we hack out of here, this does nothing! */
-
-	mov.l	@(THREAD_USP:16,er1),er0
-	mov.l	er0,@_sw_usp
-	mov.l	@(THREAD_KSP:16,er1),sp
-
-	/* restore status register */
-	mov.w	@(THREAD_CCR+2:16,er1),r3
-
-	ldc	r3l,ccr
-	rts
-
-_trace_break:
-	subs	#4,sp
-	SAVE_ALL
-	sub.l	er1,er1
-	dec.l	#1,er1
-	mov.l	er1,@(LORIG,sp)
-	mov.l	sp,er0
-	jsr	@_set_esp0
-	mov.l	@_sw_usp,er0
-	mov.l	@er0,er1
-	mov.w	@(-2:16,er1),r2
-	cmp.w	#0x5730,r2
-	beq	1f
-	subs	#2,er1
-	mov.l	er1,@er0
-1:
-	and.w	#0xff,e1
-	mov.l	er1,er0
-	jsr	@_trace_trap
-	jmp	@_ret_from_exception
-
-	.section	.bss
-_sw_ksp:
-	.space	4
-_sw_usp:
-	.space	4
-
-	.end
diff --git a/arch/h8300/kernel/gpio.c b/arch/h8300/kernel/gpio.c
deleted file mode 100644
index 084bfd0c107e..000000000000
--- a/arch/h8300/kernel/gpio.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- *  linux/arch/h8300/kernel/gpio.c
- *
- *  Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- */
-
-/*
- * Internal I/O Port Management
- */
-
-#include <linux/stddef.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-
-#define _(addr) (volatile unsigned char *)(addr)
-#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
-#include <asm/regs306x.h>
-static volatile unsigned char *ddrs[] = {
-	_(P1DDR),_(P2DDR),_(P3DDR),_(P4DDR),_(P5DDR),_(P6DDR),
-	NULL,    _(P8DDR),_(P9DDR),_(PADDR),_(PBDDR),
-};
-#define MAX_PORT 11
-#endif
-
- #if defined(CONFIG_H83002) || defined(CONFIG_H8048)
-/* Fix me!! */
-#include <asm/regs306x.h>
-static volatile unsigned char *ddrs[] = {
-	_(P1DDR),_(P2DDR),_(P3DDR),_(P4DDR),_(P5DDR),_(P6DDR),
-	NULL,    _(P8DDR),_(P9DDR),_(PADDR),_(PBDDR),
-};
-#define MAX_PORT 11
-#endif
-
-#if defined(CONFIG_H8S2678)
-#include <asm/regs267x.h>
-static volatile unsigned char *ddrs[] = {
-	_(P1DDR),_(P2DDR),_(P3DDR),NULL    ,_(P5DDR),_(P6DDR),
-	_(P7DDR),_(P8DDR),NULL,    _(PADDR),_(PBDDR),_(PCDDR),
-	_(PDDDR),_(PEDDR),_(PFDDR),_(PGDDR),_(PHDDR),
-	_(PADDR),_(PBDDR),_(PCDDR),_(PDDDR),_(PEDDR),_(PFDDR),
-	_(PGDDR),_(PHDDR)
-};
-#define MAX_PORT 17
-#endif
-#undef _
- 
-#if !defined(P1DDR)
-#error Unsuppoted CPU Selection
-#endif
-
-static struct {
-	unsigned char used;
-	unsigned char ddr;
-} gpio_regs[MAX_PORT];
-
-extern char *_platform_gpio_table(int length);
-
-int h8300_reserved_gpio(int port, unsigned int bits)
-{
-	unsigned char *used;
-
-	if (port < 0 || port >= MAX_PORT)
-		return -1;
-	used = &(gpio_regs[port].used);
-	if ((*used & bits) != 0)
-		return 0;
-	*used |= bits;
-	return 1;
-}
-
-int h8300_free_gpio(int port, unsigned int bits)
-{
-	unsigned char *used;
-
-	if (port < 0 || port >= MAX_PORT)
-		return -1;
-	used = &(gpio_regs[port].used);
-	if ((*used & bits) != bits)
-		return 0;
-	*used &= (~bits);
-	return 1;
-}
-
-int h8300_set_gpio_dir(int port_bit,int dir)
-{
-	int port = (port_bit >> 8) & 0xff;
-	int bit  = port_bit & 0xff;
-
-	if (ddrs[port] == NULL)
-		return 0;
-	if (gpio_regs[port].used & bit) {
-		if (dir)
-			gpio_regs[port].ddr |= bit;
-		else
-			gpio_regs[port].ddr &= ~bit;
-		*ddrs[port] = gpio_regs[port].ddr;
-		return 1;
-	} else
-		return 0;
-}
-
-int h8300_get_gpio_dir(int port_bit)
-{
-	int port = (port_bit >> 8) & 0xff;
-	int bit  = port_bit & 0xff;
-
-	if (ddrs[port] == NULL)
-		return 0;
-	if (gpio_regs[port].used & bit) {
-		return (gpio_regs[port].ddr & bit) != 0;
-	} else
-		return -1;
-}
-
-#if defined(CONFIG_PROC_FS)
-static char *port_status(int portno)
-{
-	static char result[10];
-	static const char io[2]={'I','O'};
-	char *rp;
-	int c;
-	unsigned char used,ddr;
-	
-	used = gpio_regs[portno].used;
-	ddr  = gpio_regs[portno].ddr;
-	result[8]='\0';
-	rp = result + 7;
-	for (c = 8; c > 0; c--,rp--,used >>= 1, ddr >>= 1)
-		if (used & 0x01)
-			*rp = io[ ddr & 0x01];
-		else	
-			*rp = '-';
-	return result;
-}
-
-static int gpio_proc_show(struct seq_file *m, void *v)
-{
-	static const char port_name[]="123456789ABCDEFGH";
-	int c;
-
-	for (c = 0; c < MAX_PORT; c++) {
-		if (ddrs[c] == NULL)
-			continue;
-		seq_printf(m, "P%c: %s\n", port_name[c], port_status(c));
-	}
-	return 0;
-}
-
-static int gpio_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, gpio_proc_show, PDE_DATA(inode));
-}
-
-static const struct file_operations gpio_proc_fops = {
-	.open		= gpio_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static __init int register_proc(void)
-{
-	return proc_create("gpio", S_IRUGO, NULL, &gpio_proc_fops) != NULL;
-}
-
-__initcall(register_proc);
-#endif
-
-void __init h8300_gpio_init(void)
-{
-	memcpy(gpio_regs,_platform_gpio_table(sizeof(gpio_regs)),sizeof(gpio_regs));
-}
diff --git a/arch/h8300/kernel/h8300_ksyms.c b/arch/h8300/kernel/h8300_ksyms.c
deleted file mode 100644
index 53d7c0e4bd83..000000000000
--- a/arch/h8300/kernel/h8300_ksyms.c
+++ /dev/null
@@ -1,100 +0,0 @@
-#include <linux/module.h>
-#include <linux/linkage.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/user.h>
-#include <linux/elfcore.h>
-#include <linux/in6.h>
-#include <linux/interrupt.h>
-
-#include <asm/setup.h>
-#include <asm/pgalloc.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/checksum.h>
-#include <asm/current.h>
-#include <asm/gpio.h>
-
-//asmlinkage long long __ashrdi3 (long long, int);
-//asmlinkage long long __lshrdi3 (long long, int);
-extern char h8300_debug_device[];
-
-/* platform dependent support */
-
-EXPORT_SYMBOL(strnlen);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(strstr);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strncmp);
-
-EXPORT_SYMBOL(ip_fast_csum);
-
-EXPORT_SYMBOL(enable_irq);
-EXPORT_SYMBOL(disable_irq);
-
-/* Networking helper routines. */
-EXPORT_SYMBOL(csum_partial_copy_nocheck);
-
-/* The following are special because they're not called
-   explicitly (the C compiler generates them).  Fortunately,
-   their interface isn't gonna change any time soon now, so
-   it's OK to leave it out of version control.  */
-//EXPORT_SYMBOL(__ashrdi3);
-//EXPORT_SYMBOL(__lshrdi3);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memcmp);
-EXPORT_SYMBOL(memscan);
-EXPORT_SYMBOL(memmove);
-
-/*
- * libgcc functions - functions that are used internally by the
- * compiler...  (prototypes are not correct though, but that
- * doesn't really matter since they're not versioned).
- */
-extern void __gcc_bcmp(void);
-extern void __ashldi3(void);
-extern void __ashrdi3(void);
-extern void __cmpdi2(void);
-extern void __divdi3(void);
-extern void __divsi3(void);
-extern void __lshrdi3(void);
-extern void __moddi3(void);
-extern void __modsi3(void);
-extern void __muldi3(void);
-extern void __mulsi3(void);
-extern void __negdi2(void);
-extern void __ucmpdi2(void);
-extern void __udivdi3(void);
-extern void __udivmoddi4(void);
-extern void __udivsi3(void);
-extern void __umoddi3(void);
-extern void __umodsi3(void);
-
-        /* gcc lib functions */
-EXPORT_SYMBOL(__gcc_bcmp);
-EXPORT_SYMBOL(__ashldi3);
-EXPORT_SYMBOL(__ashrdi3);
-EXPORT_SYMBOL(__cmpdi2);
-EXPORT_SYMBOL(__divdi3);
-EXPORT_SYMBOL(__divsi3);
-EXPORT_SYMBOL(__lshrdi3);
-EXPORT_SYMBOL(__moddi3);
-EXPORT_SYMBOL(__modsi3);
-EXPORT_SYMBOL(__muldi3);
-EXPORT_SYMBOL(__mulsi3);
-EXPORT_SYMBOL(__negdi2);
-EXPORT_SYMBOL(__ucmpdi2);
-EXPORT_SYMBOL(__udivdi3);
-EXPORT_SYMBOL(__udivmoddi4);
-EXPORT_SYMBOL(__udivsi3);
-EXPORT_SYMBOL(__umoddi3);
-EXPORT_SYMBOL(__umodsi3);
-
-EXPORT_SYMBOL(h8300_reserved_gpio);
-EXPORT_SYMBOL(h8300_free_gpio);
-EXPORT_SYMBOL(h8300_set_gpio_dir);
diff --git a/arch/h8300/kernel/irq.c b/arch/h8300/kernel/irq.c
deleted file mode 100644
index 2fa8ac7b79b5..000000000000
--- a/arch/h8300/kernel/irq.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * linux/arch/h8300/kernel/irq.c
- *
- * Copyright 2007 Yoshinori Sato <ysato@users.sourceforge.jp>
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/seq_file.h>
-#include <linux/init.h>
-#include <linux/random.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/traps.h>
-#include <asm/io.h>
-#include <asm/setup.h>
-#include <asm/errno.h>
-
-/*#define DEBUG*/
-
-extern unsigned long *interrupt_redirect_table;
-extern const int h8300_saved_vectors[];
-extern const h8300_vector h8300_trap_table[];
-int h8300_enable_irq_pin(unsigned int irq);
-void h8300_disable_irq_pin(unsigned int irq);
-
-#define CPU_VECTOR ((unsigned long *)0x000000)
-#define ADDR_MASK (0xffffff)
-
-static inline int is_ext_irq(unsigned int irq)
-{
-	return (irq >= EXT_IRQ0 && irq <= (EXT_IRQ0 + EXT_IRQS));
-}
-
-static void h8300_enable_irq(struct irq_data *data)
-{
-	if (is_ext_irq(data->irq))
-		IER_REGS |= 1 << (data->irq - EXT_IRQ0);
-}
-
-static void h8300_disable_irq(struct irq_data *data)
-{
-	if (is_ext_irq(data->irq))
-		IER_REGS &= ~(1 << (data->irq - EXT_IRQ0));
-}
-
-static unsigned int h8300_startup_irq(struct irq_data *data)
-{
-	if (is_ext_irq(data->irq))
-		return h8300_enable_irq_pin(data->irq);
-	else
-		return 0;
-}
-
-static void h8300_shutdown_irq(struct irq_data *data)
-{
-	if (is_ext_irq(data->irq))
-		h8300_disable_irq_pin(data->irq);
-}
-
-/*
- * h8300 interrupt controller implementation
- */
-struct irq_chip h8300irq_chip = {
-	.name		= "H8300-INTC",
-	.irq_startup	= h8300_startup_irq,
-	.irq_shutdown	= h8300_shutdown_irq,
-	.irq_enable	= h8300_enable_irq,
-	.irq_disable	= h8300_disable_irq,
-};
-
-#if defined(CONFIG_RAMKERNEL)
-static unsigned long __init *get_vector_address(void)
-{
-	unsigned long *rom_vector = CPU_VECTOR;
-	unsigned long base,tmp;
-	int vec_no;
-
-	base = rom_vector[EXT_IRQ0] & ADDR_MASK;
-
-	/* check romvector format */
-	for (vec_no = EXT_IRQ1; vec_no <= EXT_IRQ0+EXT_IRQS; vec_no++) {
-		if ((base+(vec_no - EXT_IRQ0)*4) != (rom_vector[vec_no] & ADDR_MASK))
-			return NULL;
-	}
-
-	/* ramvector base address */
-	base -= EXT_IRQ0*4;
-
-	/* writerble check */
-	tmp = ~(*(volatile unsigned long *)base);
-	(*(volatile unsigned long *)base) = tmp;
-	if ((*(volatile unsigned long *)base) != tmp)
-		return NULL;
-	return (unsigned long *)base;
-}
-
-static void __init setup_vector(void)
-{
-	int i;
-	unsigned long *ramvec,*ramvec_p;
-	const h8300_vector *trap_entry;
-	const int *saved_vector;
-
-	ramvec = get_vector_address();
-	if (ramvec == NULL)
-		panic("interrupt vector serup failed.");
-	else
-		printk(KERN_INFO "virtual vector at 0x%08lx\n",(unsigned long)ramvec);
-
-	/* create redirect table */
-	ramvec_p = ramvec;
-	trap_entry = h8300_trap_table;
-	saved_vector = h8300_saved_vectors;
-	for ( i = 0; i < NR_IRQS; i++) {
-		if (i == *saved_vector) {
-			ramvec_p++;
-			saved_vector++;
-		} else {
-			if ( i < NR_TRAPS ) {
-				if (*trap_entry)
-					*ramvec_p = VECTOR(*trap_entry);
-				ramvec_p++;
-				trap_entry++;
-			} else
-				*ramvec_p++ = REDIRECT(interrupt_entry);
-		}
-	}
-	interrupt_redirect_table = ramvec;
-#ifdef DEBUG
-	ramvec_p = ramvec;
-	for (i = 0; i < NR_IRQS; i++) {
-		if ((i % 8) == 0)
-			printk(KERN_DEBUG "\n%p: ",ramvec_p);
-		printk(KERN_DEBUG "%p ",*ramvec_p);
-		ramvec_p++;
-	}
-	printk(KERN_DEBUG "\n");
-#endif
-}
-#else
-#define setup_vector() do { } while(0)
-#endif
-
-void __init init_IRQ(void)
-{
-	int c;
-
-	setup_vector();
-
-	for (c = 0; c < NR_IRQS; c++)
-		irq_set_chip_and_handler(c, &h8300irq_chip, handle_simple_irq);
-}
-
-asmlinkage void do_IRQ(int irq)
-{
-	irq_enter();
-	generic_handle_irq(irq);
-	irq_exit();
-}
diff --git a/arch/h8300/kernel/module.c b/arch/h8300/kernel/module.c
deleted file mode 100644
index 1d526e05db19..000000000000
--- a/arch/h8300/kernel/module.c
+++ /dev/null
@@ -1,75 +0,0 @@
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(fmt...)
-#endif
-
-int apply_relocate_add(Elf32_Shdr *sechdrs,
-		       const char *strtab,
-		       unsigned int symindex,
-		       unsigned int relsec,
-		       struct module *me)
-{
-	unsigned int i;
-	Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
-
-	DEBUGP("Applying relocate section %u to %u\n", relsec,
-	       sechdrs[relsec].sh_info);
-	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
-		/* This is where to make the change */
-		uint32_t *loc = (uint32_t *)(sechdrs[sechdrs[relsec].sh_info].sh_addr
-					     + rela[i].r_offset);
-		/* This is the symbol it is referring to.  Note that all
-		   undefined symbols have been resolved.  */
-		Elf32_Sym *sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
-			+ ELF32_R_SYM(rela[i].r_info);
-		uint32_t v = sym->st_value + rela[i].r_addend;
-
-		switch (ELF32_R_TYPE(rela[i].r_info)) {
-		case R_H8_DIR24R8:
-			loc = (uint32_t *)((uint32_t)loc - 1);
-			*loc = (*loc & 0xff000000) | ((*loc & 0xffffff) + v);
-			break;
-		case R_H8_DIR24A8:
-			if (ELF32_R_SYM(rela[i].r_info))
-				*loc += v;
-			break;
-		case R_H8_DIR32:
-		case R_H8_DIR32A16:
-			*loc += v;
-			break;
-		case R_H8_PCREL16:
-			v -= (unsigned long)loc + 2;
-			if ((Elf32_Sword)v > 0x7fff || 
-			    (Elf32_Sword)v < -(Elf32_Sword)0x8000)
-				goto overflow;
-			else 
-				*(unsigned short *)loc = v;
-			break;
-		case R_H8_PCREL8:
-			v -= (unsigned long)loc + 1;
-			if ((Elf32_Sword)v > 0x7f || 
-			    (Elf32_Sword)v < -(Elf32_Sword)0x80)
-				goto overflow;
-			else 
-				*(unsigned char *)loc = v;
-			break;
-		default:
-			printk(KERN_ERR "module %s: Unknown relocation: %u\n",
-			       me->name, ELF32_R_TYPE(rela[i].r_info));
-			return -ENOEXEC;
-		}
-	}
-	return 0;
- overflow:
-	printk(KERN_ERR "module %s: relocation offset overflow: %08x\n",
-	       me->name, rela[i].r_offset);
-	return -ENOEXEC;
-}
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
deleted file mode 100644
index 1a744ab7e7e5..000000000000
--- a/arch/h8300/kernel/process.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- *  linux/arch/h8300/kernel/process.c
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- *  Based on:
- *
- *  linux/arch/m68knommu/kernel/process.c
- *
- *  Copyright (C) 1998  D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
- *                      Kenneth Albanowski <kjahds@kjahds.com>,
- *                      The Silver Hammer Group, Ltd.
- *
- *  linux/arch/m68k/kernel/process.c
- *
- *  Copyright (C) 1995  Hamish Macdonald
- *
- *  68060 fixes by Jesper Skov
- */
-
-/*
- * This file handles the architecture-dependent parts of process handling..
- */
-
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/fs.h>
-#include <linux/slab.h>
-#include <linux/rcupdate.h>
-
-#include <asm/uaccess.h>
-#include <asm/traps.h>
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
-asmlinkage void ret_from_fork(void);
-asmlinkage void ret_from_kernel_thread(void);
-
-/*
- * The idle loop on an H8/300..
- */
-#if !defined(CONFIG_H8300H_SIM) && !defined(CONFIG_H8S_SIM)
-void arch_cpu_idle(void)
-{
-	local_irq_enable();
-	/* XXX: race here! What if need_resched() gets set now? */
-	__asm__("sleep");
-}
-#endif
-
-void machine_restart(char * __unused)
-{
-	local_irq_disable();
-	__asm__("jmp @@0"); 
-}
-
-void machine_halt(void)
-{
-	local_irq_disable();
-	__asm__("sleep");
-	for (;;);
-}
-
-void machine_power_off(void)
-{
-	local_irq_disable();
-	__asm__("sleep");
-	for (;;);
-}
-
-void show_regs(struct pt_regs * regs)
-{
-	show_regs_print_info(KERN_DEFAULT);
-
-	printk("\nPC: %08lx  Status: %02x",
-	       regs->pc, regs->ccr);
-	printk("\nORIG_ER0: %08lx ER0: %08lx ER1: %08lx",
-	       regs->orig_er0, regs->er0, regs->er1);
-	printk("\nER2: %08lx ER3: %08lx ER4: %08lx ER5: %08lx",
-	       regs->er2, regs->er3, regs->er4, regs->er5);
-	printk("\nER6' %08lx ",regs->er6);
-	if (user_mode(regs))
-		printk("USP: %08lx\n", rdusp());
-	else
-		printk("\n");
-}
-
-void flush_thread(void)
-{
-}
-
-int copy_thread(unsigned long clone_flags,
-                unsigned long usp, unsigned long topstk,
-		 struct task_struct * p)
-{
-	struct pt_regs * childregs;
-
-	childregs = (struct pt_regs *) (THREAD_SIZE + task_stack_page(p)) - 1;
-
-	if (unlikely(p->flags & PF_KTHREAD)) {
-		memset(childregs, 0, sizeof(struct pt_regs));
-		childregs->retpc = (unsigned long) ret_from_kernel_thread;
-		childregs->er4 = topstk; /* arg */
-		childregs->er5 = usp; /* fn */
-		p->thread.ksp = (unsigned long)childregs;
-	}
-	*childregs = *current_pt_regs();
-	childregs->retpc = (unsigned long) ret_from_fork;
-	childregs->er0 = 0;
-	p->thread.usp = usp ?: rdusp();
-	p->thread.ksp = (unsigned long)childregs;
-
-	return 0;
-}
-
-unsigned long thread_saved_pc(struct task_struct *tsk)
-{
-	return ((struct pt_regs *)tsk->thread.esp0)->pc;
-}
-
-unsigned long get_wchan(struct task_struct *p)
-{
-	unsigned long fp, pc;
-	unsigned long stack_page;
-	int count = 0;
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
-
-	stack_page = (unsigned long)p;
-	fp = ((struct pt_regs *)p->thread.ksp)->er6;
-	do {
-		if (fp < stack_page+sizeof(struct thread_info) ||
-		    fp >= 8184+stack_page)
-			return 0;
-		pc = ((unsigned long *)fp)[1];
-		if (!in_sched_functions(pc))
-			return pc;
-		fp = *(unsigned long *) fp;
-	} while (count++ < 16);
-	return 0;
-}
diff --git a/arch/h8300/kernel/ptrace.c b/arch/h8300/kernel/ptrace.c
deleted file mode 100644
index 748cf6585aa4..000000000000
--- a/arch/h8300/kernel/ptrace.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- *  linux/arch/h8300/kernel/ptrace.c
- *
- *  Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- *  Based on:
- *  linux/arch/m68k/kernel/ptrace.c
- *
- *  Copyright (C) 1994 by Hamish Macdonald
- *  Taken from linux/kernel/ptrace.c and modified for M680x0.
- *  linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of
- * this archive for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/signal.h>
-
-#include <asm/uaccess.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/signal.h>
-
-/* cpu depend functions */
-extern long h8300_get_reg(struct task_struct *task, int regno);
-extern int  h8300_put_reg(struct task_struct *task, int regno, unsigned long data);
-
-
-void user_disable_single_step(struct task_struct *child)
-{
-}
-
-/*
- * does not yet catch signals sent when the child dies.
- * in exit.c or in signal.c.
- */
-
-void ptrace_disable(struct task_struct *child)
-{
-	user_disable_single_step(child);
-}
-
-long arch_ptrace(struct task_struct *child, long request,
-		 unsigned long addr, unsigned long data)
-{
-	int ret;
-	int regno = addr >> 2;
-	unsigned long __user *datap = (unsigned long __user *) data;
-
-	switch (request) {
-	/* read the word at location addr in the USER area. */
-		case PTRACE_PEEKUSR: {
-			unsigned long tmp = 0;
-			
-			if ((addr & 3) || addr >= sizeof(struct user)) {
-				ret = -EIO;
-				break ;
-			}
-			
-		        ret = 0;  /* Default return condition */
-
-			if (regno < H8300_REGS_NO)
-				tmp = h8300_get_reg(child, regno);
-			else {
-				switch (regno) {
-				case 49:
-					tmp = child->mm->start_code;
-					break ;
-				case 50:
-					tmp = child->mm->start_data;
-					break ;
-				case 51:
-					tmp = child->mm->end_code;
-					break ;
-				case 52:
-					tmp = child->mm->end_data;
-					break ;
-				default:
-					ret = -EIO;
-				}
-			}
-			if (!ret)
-				ret = put_user(tmp, datap);
-			break ;
-		}
-
-      /* when I and D space are separate, this will have to be fixed. */
-		case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
-			if ((addr & 3) || addr >= sizeof(struct user)) {
-				ret = -EIO;
-				break ;
-			}
-			    
-			if (regno == PT_ORIG_ER0) {
-				ret = -EIO;
-				break ;
-			}
-			if (regno < H8300_REGS_NO) {
-				ret = h8300_put_reg(child, regno, data);
-				break ;
-			}
-			ret = -EIO;
-			break ;
-
-		case PTRACE_GETREGS: { /* Get all gp regs from the child. */
-		  	int i;
-			unsigned long tmp;
-			for (i = 0; i < H8300_REGS_NO; i++) {
-			    tmp = h8300_get_reg(child, i);
-			    if (put_user(tmp, datap)) {
-				ret = -EFAULT;
-				break;
-			    }
-			    datap++;
-			}
-			ret = 0;
-			break;
-		}
-
-		case PTRACE_SETREGS: { /* Set all gp regs in the child. */
-			int i;
-			unsigned long tmp;
-			for (i = 0; i < H8300_REGS_NO; i++) {
-			    if (get_user(tmp, datap)) {
-				ret = -EFAULT;
-				break;
-			    }
-			    h8300_put_reg(child, i, tmp);
-			    datap++;
-			}
-			ret = 0;
-			break;
-		}
-
-		default:
-			ret = ptrace_request(child, request, addr, data);
-			break;
-	}
-	return ret;
-}
-
-asmlinkage void do_syscall_trace(void)
-{
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return;
-	if (!(current->ptrace & PT_PTRACED))
-		return;
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-}
diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c
deleted file mode 100644
index d0b1607f2711..000000000000
--- a/arch/h8300/kernel/setup.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- *  linux/arch/h8300/kernel/setup.c
- *
- *  Copyleft  ()) 2000       James D. Schettine {james@telos-systems.com}
- *  Copyright (C) 1999,2000  Greg Ungerer (gerg@snapgear.com)
- *  Copyright (C) 1998,1999  D. Jeff Dionne <jeff@lineo.ca>
- *  Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
- *  Copyright (C) 1995       Hamish Macdonald
- *  Copyright (C) 2000       Lineo Inc. (www.lineo.com) 
- *  Copyright (C) 2001 	     Lineo, Inc. <www.lineo.com>
- *
- *  H8/300 porting Yoshinori Sato <ysato@users.sourceforge.jp>
- */
-
-/*
- * This file handles the architecture-dependent parts of system setup
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/fb.h>
-#include <linux/console.h>
-#include <linux/genhd.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/major.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/init.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/sections.h>
-
-#if defined(__H8300H__)
-#define CPU "H8/300H"
-#include <asm/regs306x.h>
-#endif
-
-#if defined(__H8300S__)
-#define CPU "H8S"
-#include <asm/regs267x.h>
-#endif
-
-#define STUBSIZE 0xc000
-
-unsigned long rom_length;
-unsigned long memory_start;
-unsigned long memory_end;
-
-char __initdata command_line[COMMAND_LINE_SIZE];
-
-extern int _ramstart, _ramend;
-extern char _target_name[];
-extern void h8300_gpio_init(void);
-
-#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) \
-    && defined(CONFIG_GDB_MAGICPRINT)
-/* printk with gdb service */
-static void gdb_console_output(struct console *c, const char *msg, unsigned len)
-{
-	for (; len > 0; len--) {
-		asm("mov.w %0,r2\n\t"
-                    "jsr @0xc4"::"r"(*msg++):"er2");
-	}
-}
-
-/*
- *	Setup initial baud/bits/parity. We do two things here:
- *	- construct a cflag setting for the first rs_open()
- *	- initialize the serial port
- *	Return non-zero if we didn't find a serial port.
- */
-static int __init gdb_console_setup(struct console *co, char *options)
-{
-	return 0;
-}
-
-static const struct console gdb_console = {
-	.name		= "gdb_con",
-	.write		= gdb_console_output,
-	.device		= NULL,
-	.setup		= gdb_console_setup,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-};
-#endif
-
-void __init setup_arch(char **cmdline_p)
-{
-	int bootmap_size;
-
-	memory_start = (unsigned long) &_ramstart;
-
-	/* allow for ROMFS on the end of the kernel */
-	if (memcmp((void *)memory_start, "-rom1fs-", 8) == 0) {
-#if defined(CONFIG_BLK_DEV_INITRD)
-		initrd_start = memory_start;
-		initrd_end = memory_start += be32_to_cpu(((unsigned long *) (memory_start))[2]);
-#else
-		memory_start += be32_to_cpu(((unsigned long *) memory_start)[2]);
-#endif
-	}
-	memory_start = PAGE_ALIGN(memory_start);
-#if !defined(CONFIG_BLKDEV_RESERVE)
-	memory_end = (unsigned long) &_ramend; /* by now the stack is part of the init task */
-#if defined(CONFIG_GDB_DEBUG)
-	memory_end -= STUBSIZE;
-#endif
-#else
-	if ((memory_end < CONFIG_BLKDEV_RESERVE_ADDRESS) && 
-	    (memory_end > CONFIG_BLKDEV_RESERVE_ADDRESS))
-	    /* overlap userarea */
-	    memory_end = CONFIG_BLKDEV_RESERVE_ADDRESS; 
-#endif
-
-	init_mm.start_code = (unsigned long) _stext;
-	init_mm.end_code = (unsigned long) _etext;
-	init_mm.end_data = (unsigned long) _edata;
-	init_mm.brk = (unsigned long) 0; 
-
-#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT)
-	register_console((struct console *)&gdb_console);
-#endif
-
-	printk(KERN_INFO "\r\n\nuClinux " CPU "\n");
-	printk(KERN_INFO "Target Hardware: %s\n",_target_name);
-	printk(KERN_INFO "Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n");
-	printk(KERN_INFO "H8/300 series support by Yoshinori Sato <ysato@users.sourceforge.jp>\n");
-
-#ifdef DEBUG
-	printk(KERN_DEBUG "KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p "
-		"BSS=0x%p-0x%p\n", _stext, _etext, _sdata, _edata, __bss_start,
-		__bss_stop);
-	printk(KERN_DEBUG "KERNEL -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx "
-		"STACK=0x%06lx-0x%p\n", __bss_stop, memory_start, memory_start,
-		memory_end, memory_end, &_ramend);
-#endif
-
-#ifdef CONFIG_DEFAULT_CMDLINE
-	/* set from default command line */
-	if (*command_line == '\0')
-		strcpy(command_line,CONFIG_KERNEL_COMMAND);
-#endif
-	/* Keep a copy of command line */
-	*cmdline_p = &command_line[0];
-	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
-	boot_command_line[COMMAND_LINE_SIZE-1] = 0;
-
-#ifdef DEBUG
-	if (strlen(*cmdline_p)) 
-		printk(KERN_DEBUG "Command line: '%s'\n", *cmdline_p);
-#endif
-
-	/*
-	 * give all the memory to the bootmap allocator,  tell it to put the
-	 * boot mem_map at the start of memory
-	 */
-	bootmap_size = init_bootmem_node(
-			NODE_DATA(0),
-			memory_start >> PAGE_SHIFT, /* map goes here */
-			PAGE_OFFSET >> PAGE_SHIFT,	/* 0 on coldfire */
-			memory_end >> PAGE_SHIFT);
-	/*
-	 * free the usable memory,  we have to make sure we do not free
-	 * the bootmem bitmap so we then reserve it after freeing it :-)
-	 */
-	free_bootmem(memory_start, memory_end - memory_start);
-	reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
-	/*
-	 * get kmalloc into gear
-	 */
-	paging_init();
-	h8300_gpio_init();
-#if defined(CONFIG_H8300_AKI3068NET) && defined(CONFIG_IDE)
-	{
-#define AREABIT(addr) (1 << (((addr) >> 21) & 7))
-		/* setup BSC */
-		volatile unsigned char *abwcr = (volatile unsigned char *)ABWCR;
-		volatile unsigned char *cscr = (volatile unsigned char *)CSCR;
-		*abwcr &= ~(AREABIT(CONFIG_H8300_IDE_BASE) | AREABIT(CONFIG_H8300_IDE_ALT));
-		*cscr  |= (AREABIT(CONFIG_H8300_IDE_BASE) | AREABIT(CONFIG_H8300_IDE_ALT)) | 0x0f;
-	}
-#endif
-#ifdef DEBUG
-	printk(KERN_DEBUG "Done setup_arch\n");
-#endif
-}
-
-/*
- *	Get CPU information for use by the procfs.
- */
-
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
-    char *cpu;
-    int mode;
-    u_long clockfreq;
-
-    cpu = CPU;
-    mode = *(volatile unsigned char *)MDCR & 0x07;
-
-    clockfreq = CONFIG_CPU_CLOCK;
-
-    seq_printf(m,  "CPU:\t\t%s (mode:%d)\n"
-		   "Clock:\t\t%lu.%1luMHz\n"
-		   "BogoMips:\t%lu.%02lu\n"
-		   "Calibration:\t%lu loops\n",
-	           cpu,mode,
-		   clockfreq/1000,clockfreq%1000,
-		   (loops_per_jiffy*HZ)/500000,((loops_per_jiffy*HZ)/5000)%100,
-		   (loops_per_jiffy*HZ));
-
-    return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-	return *pos < NR_CPUS ? ((void *) 0x12345678) : NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return c_start(m, pos);
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
-	.start	= c_start,
-	.next	= c_next,
-	.stop	= c_stop,
-	.show	= show_cpuinfo,
-};
diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c
deleted file mode 100644
index a65ff3b76326..000000000000
--- a/arch/h8300/kernel/signal.c
+++ /dev/null
@@ -1,444 +0,0 @@
-/*
- *  linux/arch/h8300/kernel/signal.c
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/*
- * uClinux H8/300 support by Yoshinori Sato <ysato@users.sourceforge.jp>
- *                and David McCullough <davidm@snapgear.com>
- *
- * Based on
- * Linux/m68k by Hamish Macdonald
- */
-
-/*
- * ++roman (07/09/96): implemented signal stacks (specially for tosemu on
- * Atari :-) Current limitation: Only one sigstack can be active at one time.
- * If a second signal with SA_ONSTACK set arrives while working on a sigstack,
- * SA_ONSTACK is ignored. This behaviour avoids lots of trouble with nested
- * signal handlers!
- */
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/syscalls.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/highuid.h>
-#include <linux/personality.h>
-#include <linux/tty.h>
-#include <linux/binfmts.h>
-#include <linux/tracehook.h>
-
-#include <asm/setup.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/traps.h>
-#include <asm/ucontext.h>
-
-/*
- * Do a signal return; undo the signal stack.
- *
- * Keep the return code on the stack quadword aligned!
- * That makes the cache flush below easier.
- */
-
-struct sigframe
-{
-	long dummy_er0;
-	long dummy_vector;
-#if defined(CONFIG_CPU_H8S)
-	short dummy_exr;
-#endif
-	long dummy_pc;
-	char *pretcode;
-	unsigned char retcode[8];
-	unsigned long extramask[_NSIG_WORDS-1];
-	struct sigcontext sc;
-	int sig;
-} __attribute__((aligned(2),packed));
-
-struct rt_sigframe
-{
-	long dummy_er0;
-	long dummy_vector;
-#if defined(CONFIG_CPU_H8S)
-	short dummy_exr;
-#endif
-	long dummy_pc;
-	char *pretcode;
-	struct siginfo *pinfo;
-	void *puc;
-	unsigned char retcode[8];
-	struct siginfo info;
-	struct ucontext uc;
-	int sig;
-} __attribute__((aligned(2),packed));
-
-static inline int
-restore_sigcontext(struct sigcontext *usc, int *pd0)
-{
-	struct pt_regs *regs = current_pt_regs();
-	int err = 0;
-	unsigned int ccr;
-	unsigned int usp;
-	unsigned int er0;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-#define COPY(r) err |= __get_user(regs->r, &usc->sc_##r)    /* restore passed registers */
-	COPY(er1);
-	COPY(er2);
-	COPY(er3);
-	COPY(er5);
-	COPY(pc);
-	ccr = regs->ccr & 0x10;
-	COPY(ccr);
-#undef COPY
-	regs->ccr &= 0xef;
-	regs->ccr |= ccr;
-	regs->orig_er0 = -1;		/* disable syscall checks */
-	err |= __get_user(usp, &usc->sc_usp);
-	wrusp(usp);
-
-	err |= __get_user(er0, &usc->sc_er0);
-	*pd0 = er0;
-	return err;
-}
-
-asmlinkage int sys_sigreturn(void)
-{
-	unsigned long usp = rdusp();
-	struct sigframe *frame = (struct sigframe *)(usp - 4);
-	sigset_t set;
-	int er0;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-	if (__get_user(set.sig[0], &frame->sc.sc_mask) ||
-	    (_NSIG_WORDS > 1 &&
-	     __copy_from_user(&set.sig[1], &frame->extramask,
-			      sizeof(frame->extramask))))
-		goto badframe;
-
-	set_current_blocked(&set);
-	
-	if (restore_sigcontext(&frame->sc, &er0))
-		goto badframe;
-	return er0;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(void)
-{
-	unsigned long usp = rdusp();
-	struct rt_sigframe *frame = (struct rt_sigframe *)(usp - 4);
-	sigset_t set;
-	int er0;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
-		goto badframe;
-
-	set_current_blocked(&set);
-	
-	if (restore_sigcontext(&frame->uc.uc_mcontext, &er0))
-		goto badframe;
-
-	if (restore_altstack(&frame->uc.uc_stack))
-		goto badframe;
-
-	return er0;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-static int setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
-			     unsigned long mask)
-{
-	int err = 0;
-
-	err |= __put_user(regs->er0, &sc->sc_er0);
-	err |= __put_user(regs->er1, &sc->sc_er1);
-	err |= __put_user(regs->er2, &sc->sc_er2);
-	err |= __put_user(regs->er3, &sc->sc_er3);
-	err |= __put_user(regs->er4, &sc->sc_er4);
-	err |= __put_user(regs->er5, &sc->sc_er5);
-	err |= __put_user(regs->er6, &sc->sc_er6);
-	err |= __put_user(rdusp(),   &sc->sc_usp);
-	err |= __put_user(regs->pc,  &sc->sc_pc);
-	err |= __put_user(regs->ccr, &sc->sc_ccr);
-	err |= __put_user(mask,      &sc->sc_mask);
-
-	return err;
-}
-
-static inline void *
-get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
-{
-	unsigned long usp;
-
-	/* Default to using normal stack.  */
-	usp = rdusp();
-
-	/* This is the X/Open sanctioned signal stack switching.  */
-	if (ka->sa.sa_flags & SA_ONSTACK) {
-		if (!sas_ss_flags(usp))
-			usp = current->sas_ss_sp + current->sas_ss_size;
-	}
-	return (void *)((usp - frame_size) & -8UL);
-}
-
-static int setup_frame (int sig, struct k_sigaction *ka,
-			 sigset_t *set, struct pt_regs *regs)
-{
-	struct sigframe *frame;
-	int err = 0;
-	int usig;
-	unsigned char *ret;
-
-	frame = get_sigframe(ka, regs, sizeof(*frame));
-
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
-
-	usig = current_thread_info()->exec_domain
-		&& current_thread_info()->exec_domain->signal_invmap
-		&& sig < 32
-		? current_thread_info()->exec_domain->signal_invmap[sig]
-		: sig;
-
-	err |= __put_user(usig, &frame->sig);
-	if (err)
-		goto give_sigsegv;
-
-	err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
-	if (err)
-		goto give_sigsegv;
-
-	if (_NSIG_WORDS > 1) {
-		err |= copy_to_user(frame->extramask, &set->sig[1],
-				    sizeof(frame->extramask));
-		if (err)
-			goto give_sigsegv;
-	}
-
-	ret = frame->retcode;
-	if (ka->sa.sa_flags & SA_RESTORER)
-		ret = (unsigned char *)(ka->sa.sa_restorer);
-	else {
-		/* sub.l er0,er0; mov.b #__NR_sigreturn,r0l; trapa #0 */
-		err |= __put_user(0x1a80f800 + (__NR_sigreturn & 0xff),
-				  (unsigned long *)(frame->retcode + 0));
-		err |= __put_user(0x5700, (unsigned short *)(frame->retcode + 4));
-	}
-
-	/* Set up to return from userspace.  */
-	err |= __put_user(ret, &frame->pretcode);
-
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up registers for signal handler */
-	wrusp ((unsigned long) frame);
-	regs->pc = (unsigned long) ka->sa.sa_handler;
-	regs->er0 = (current_thread_info()->exec_domain
-			   && current_thread_info()->exec_domain->signal_invmap
-			   && sig < 32
-			   ? current_thread_info()->exec_domain->signal_invmap[sig]
-		          : sig);
-	regs->er1 = (unsigned long)&(frame->sc);
-	regs->er5 = current->mm->start_data;	/* GOT base */
-
-	return 0;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-	return -EFAULT;
-}
-
-static int setup_rt_frame (int sig, struct k_sigaction *ka, siginfo_t *info,
-			    sigset_t *set, struct pt_regs *regs)
-{
-	struct rt_sigframe *frame;
-	int err = 0;
-	int usig;
-	unsigned char *ret;
-
-	frame = get_sigframe(ka, regs, sizeof(*frame));
-
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
-
-	usig = current_thread_info()->exec_domain
-		&& current_thread_info()->exec_domain->signal_invmap
-		&& sig < 32
-		? current_thread_info()->exec_domain->signal_invmap[sig]
-		: sig;
-
-	err |= __put_user(usig, &frame->sig);
-	if (err)
-		goto give_sigsegv;
-
-	err |= __put_user(&frame->info, &frame->pinfo);
-	err |= __put_user(&frame->uc, &frame->puc);
-	err |= copy_siginfo_to_user(&frame->info, info);
-	if (err)
-		goto give_sigsegv;
-
-	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(0, &frame->uc.uc_link);
-	err |= __save_altstack(&frame->uc.uc_stack, rdusp());
-	err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]);
-	err |= copy_to_user (&frame->uc.uc_sigmask, set, sizeof(*set));
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up to return from userspace.  */
-	ret = frame->retcode;
-	if (ka->sa.sa_flags & SA_RESTORER)
-		ret = (unsigned char *)(ka->sa.sa_restorer);
-	else {
-		/* sub.l er0,er0; mov.b #__NR_sigreturn,r0l; trapa #0 */
-		err |= __put_user(0x1a80f800 + (__NR_sigreturn & 0xff),
-				  (unsigned long *)(frame->retcode + 0));
-		err |= __put_user(0x5700, (unsigned short *)(frame->retcode + 4));
-	}
-	err |= __put_user(ret, &frame->pretcode);
-
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up registers for signal handler */
-	wrusp ((unsigned long) frame);
-	regs->pc  = (unsigned long) ka->sa.sa_handler;
-	regs->er0 = (current_thread_info()->exec_domain
-		     && current_thread_info()->exec_domain->signal_invmap
-		     && sig < 32
-		     ? current_thread_info()->exec_domain->signal_invmap[sig]
-		     : sig);
-	regs->er1 = (unsigned long)&(frame->info);
-	regs->er2 = (unsigned long)&frame->uc;
-	regs->er5 = current->mm->start_data;	/* GOT base */
-
-	return 0;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-	return -EFAULT;
-}
-
-/*
- * OK, we're invoking a handler
- */
-static void
-handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
-	      struct pt_regs * regs)
-{
-	sigset_t *oldset = sigmask_to_save();
-	int ret;
-	/* are we from a system call? */
-	if (regs->orig_er0 >= 0) {
-		switch (regs->er0) {
-		        case -ERESTART_RESTARTBLOCK:
-			case -ERESTARTNOHAND:
-				regs->er0 = -EINTR;
-				break;
-
-			case -ERESTARTSYS:
-				if (!(ka->sa.sa_flags & SA_RESTART)) {
-					regs->er0 = -EINTR;
-					break;
-				}
-			/* fallthrough */
-			case -ERESTARTNOINTR:
-				regs->er0 = regs->orig_er0;
-				regs->pc -= 2;
-		}
-	}
-
-	/* set up the stack frame */
-	if (ka->sa.sa_flags & SA_SIGINFO)
-		ret = setup_rt_frame(sig, ka, info, oldset, regs);
-	else
-		ret = setup_frame(sig, ka, oldset, regs);
-
-	if (!ret)
-		signal_delivered(sig, info, ka, regs, 0);
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- */
-static void do_signal(struct pt_regs *regs)
-{
-	siginfo_t info;
-	int signr;
-	struct k_sigaction ka;
-
-	/*
-	 * We want the common case to go fast, which
-	 * is why we may in certain cases get here from
-	 * kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if ((regs->ccr & 0x10))
-		return;
-
-	current->thread.esp0 = (unsigned long) regs;
-
-	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		/* Whee!  Actually deliver the signal.  */
-		handle_signal(signr, &info, &ka, regs);
-		return;
-	}
-	/* Did we come from a system call? */
-	if (regs->orig_er0 >= 0) {
-		/* Restart the system call - no handlers present */
-		if (regs->er0 == -ERESTARTNOHAND ||
-		    regs->er0 == -ERESTARTSYS ||
-		    regs->er0 == -ERESTARTNOINTR) {
-			regs->er0 = regs->orig_er0;
-			regs->pc -= 2;
-		}
-		if (regs->er0 == -ERESTART_RESTARTBLOCK){
-			regs->er0 = __NR_restart_syscall;
-			regs->pc -= 2;
-		}
-	}
-
-	/* If there's no signal to deliver, we just restore the saved mask.  */
-	restore_saved_sigmask();
-}
-
-asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags)
-{
-	if (thread_info_flags & _TIF_SIGPENDING)
-		do_signal(regs);
-
-	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
-		clear_thread_flag(TIF_NOTIFY_RESUME);
-		tracehook_notify_resume(regs);
-	}
-}
diff --git a/arch/h8300/kernel/sys_h8300.c b/arch/h8300/kernel/sys_h8300.c
deleted file mode 100644
index bf350cb7f597..000000000000
--- a/arch/h8300/kernel/sys_h8300.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/h8300/kernel/sys_h8300.c
- *
- * This file contains various random system calls that
- * have a non-standard calling sequence on the H8/300
- * platform.
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/syscalls.h>
-#include <linux/mman.h>
-#include <linux/file.h>
-#include <linux/fs.h>
-#include <linux/ipc.h>
-
-#include <asm/setup.h>
-#include <asm/uaccess.h>
-#include <asm/cachectl.h>
-#include <asm/traps.h>
-#include <asm/unistd.h>
-
-/* sys_cacheflush -- no support.  */
-asmlinkage int
-sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len)
-{
-	return -EINVAL;
-}
-
-asmlinkage int sys_getpagesize(void)
-{
-	return PAGE_SIZE;
-}
-
-#if defined(CONFIG_SYSCALL_PRINT)
-asmlinkage void syscall_print(void *dummy,...)
-{
-	struct pt_regs *regs = (struct pt_regs *) ((unsigned char *)&dummy-4);
-	printk("call %06lx:%ld 1:%08lx,2:%08lx,3:%08lx,ret:%08lx\n",
-               ((regs->pc)&0xffffff)-2,regs->orig_er0,regs->er1,regs->er2,regs->er3,regs->er0);
-}
-#endif
diff --git a/arch/h8300/kernel/syscalls.S b/arch/h8300/kernel/syscalls.S
deleted file mode 100644
index c55e0ed270d5..000000000000
--- a/arch/h8300/kernel/syscalls.S
+++ /dev/null
@@ -1,338 +0,0 @@
-/* Systemcall Entry Table */
-#include <linux/sys.h>
-#include <asm/linkage.h>
-#include <asm/unistd.h>
-
-#define CALL(x)	.long _ ## x
-
-.globl _sys_call_table
-
-#if defined(CONFIG_CPU_H8300H)
-	.h8300h
-#endif
-#if defined(CONFIG_CPU_H8S)
-	.h8300s
-#endif
-	.section .text
-	.align	2
-_sys_call_table:
-	CALL(sys_ni_syscall)		/* 0  -  old "setup()" system call*/
-	CALL(sys_exit)
-	CALL(sys_fork)
-	CALL(sys_read)
-	CALL(sys_write)
-	CALL(sys_open)			/* 5 */
-	CALL(sys_close)
-	CALL(sys_waitpid)
-	CALL(sys_creat)
-	CALL(sys_link)
-	CALL(sys_unlink)		/* 10 */
-	CALL(sys_execve)
-	CALL(sys_chdir)
-	CALL(sys_time)
-	CALL(sys_mknod)
-	CALL(sys_chmod)			/* 15 */
-	CALL(sys_chown16)
-	CALL(sys_ni_syscall)		/* old break syscall holder */
-	CALL(sys_stat)
-	CALL(sys_lseek)
-	CALL(sys_getpid)		/* 20 */
-	CALL(sys_mount)
-	CALL(sys_oldumount)
-	CALL(sys_setuid16)
-	CALL(sys_getuid16)
-	CALL(sys_stime)			/* 25 */
-	CALL(sys_ptrace)
-	CALL(sys_alarm)
-	CALL(sys_fstat)
-	CALL(sys_pause)
-	CALL(sys_utime)			/* 30 */
-	CALL(sys_ni_syscall)		/* old stty syscall holder */
-	CALL(sys_ni_syscall)		/* old gtty syscall holder */
-	CALL(sys_access)
-	CALL(sys_nice)
-	CALL(sys_ni_syscall)		/* 35 old ftime syscall holder */
-	CALL(sys_sync)
-	CALL(sys_kill)
-	CALL(sys_rename)
-	CALL(sys_mkdir)
-	CALL(sys_rmdir)			/* 40 */
-	CALL(sys_dup)
-	CALL(sys_pipe)
-	CALL(sys_times)
-	CALL(sys_ni_syscall)		/* old prof syscall holder */
-	CALL(sys_brk)			/* 45 */
-	CALL(sys_setgid16)
-	CALL(sys_getgid16)
-	CALL(sys_signal)
-	CALL(sys_geteuid16)
-	CALL(sys_getegid16)		/* 50 */
-	CALL(sys_acct)
-	CALL(sys_umount)		/* recycled never used phys() */
-	CALL(sys_ni_syscall)		/* old lock syscall holder */
-	CALL(sys_ioctl)
-	CALL(sys_fcntl)			/* 55 */
-	CALL(sys_ni_syscall)		/* old mpx syscall holder */
-	CALL(sys_setpgid)
-	CALL(sys_ni_syscall)		/* old ulimit syscall holder */
-	CALL(sys_ni_syscall)
-	CALL(sys_umask)			/* 60 */
-	CALL(sys_chroot)
-	CALL(sys_ustat)
-	CALL(sys_dup2)
-	CALL(sys_getppid)
-	CALL(sys_getpgrp)		/* 65 */
-	CALL(sys_setsid)
-	CALL(sys_sigaction)
-	CALL(sys_sgetmask)
-	CALL(sys_ssetmask)
-	CALL(sys_setreuid16)		/* 70 */
-	CALL(sys_setregid16)
-	CALL(sys_sigsuspend)
-	CALL(sys_sigpending)
-	CALL(sys_sethostname)
-	CALL(sys_setrlimit)		/* 75 */
-	CALL(sys_old_getrlimit)
-	CALL(sys_getrusage)
-	CALL(sys_gettimeofday)
-	CALL(sys_settimeofday)
-	CALL(sys_getgroups16)		/* 80 */
-	CALL(sys_setgroups16)
-	CALL(sys_old_select)
-	CALL(sys_symlink)
-	CALL(sys_lstat)
-	CALL(sys_readlink)		/* 85 */
-	CALL(sys_uselib)
-	CALL(sys_swapon)
-	CALL(sys_reboot)
-	CALL(sys_old_readdir)
-	CALL(sys_old_mmap)		/* 90 */
-	CALL(sys_munmap)
-	CALL(sys_truncate)
-	CALL(sys_ftruncate)
-	CALL(sys_fchmod)
-	CALL(sys_fchown16)		/* 95 */
-	CALL(sys_getpriority)
-	CALL(sys_setpriority)
-	CALL(sys_ni_syscall)		/* old profil syscall holder */
-	CALL(sys_statfs)
-	CALL(sys_fstatfs)		/* 100 */
-	CALL(sys_ni_syscall)		/* ioperm for i386 */
-	CALL(sys_socketcall)
-	CALL(sys_syslog)
-	CALL(sys_setitimer)
-	CALL(sys_getitimer)		/* 105 */
-	CALL(sys_newstat)
-	CALL(sys_newlstat)
-	CALL(sys_newfstat)
-	CALL(sys_ni_syscall)
-	CALL(sys_ni_syscall)		/* iopl for i386 */ /* 110 */
-	CALL(sys_vhangup)
-	CALL(sys_ni_syscall)		/* obsolete idle() syscall */
-	CALL(sys_ni_syscall)		/* vm86old for i386 */
-	CALL(sys_wait4)
-	CALL(sys_swapoff)		/* 115 */
-	CALL(sys_sysinfo)
-	CALL(sys_ipc)
-	CALL(sys_fsync)
-	CALL(sys_sigreturn)
-	CALL(sys_clone)			/* 120 */
-	CALL(sys_setdomainname)
-	CALL(sys_newuname)
-	CALL(sys_cacheflush)		/* modify_ldt for i386 */
-	CALL(sys_adjtimex)
-	CALL(sys_ni_syscall)		/* 125 sys_mprotect */
-	CALL(sys_sigprocmask)
-	CALL(sys_ni_syscall)		/* sys_create_module */
-	CALL(sys_init_module)
-	CALL(sys_delete_module)
-	CALL(sys_ni_syscall)		/* 130 sys_get_kernel_syms */
-	CALL(sys_quotactl)
-	CALL(sys_getpgid)
-	CALL(sys_fchdir)
-	CALL(sys_bdflush)
-	CALL(sys_sysfs)			/* 135 */
-	CALL(sys_personality)
-	CALL(sys_ni_syscall)		/* for afs_syscall */
-	CALL(sys_setfsuid16)
-	CALL(sys_setfsgid16)
-	CALL(sys_llseek)		/* 140 */
-	CALL(sys_getdents)
-	CALL(sys_select)
-	CALL(sys_flock)
-	CALL(sys_ni_syscall)		/* sys_msync */
-	CALL(sys_readv)			/* 145 */
-	CALL(sys_writev)
-	CALL(sys_getsid)
-	CALL(sys_fdatasync)
-	CALL(sys_sysctl)
-	CALL(sys_ni_syscall)		/* 150 sys_mlock */
-	CALL(sys_ni_syscall)		/* sys_munlock */
-	CALL(sys_ni_syscall)		/* sys_mlockall */
-	CALL(sys_ni_syscall)		/* sys_munlockall */
-	CALL(sys_sched_setparam)
-	CALL(sys_sched_getparam)	/* 155 */
-	CALL(sys_sched_setscheduler)
-	CALL(sys_sched_getscheduler)
-	CALL(sys_sched_yield)
-	CALL(sys_sched_get_priority_max)
-	CALL(sys_sched_get_priority_min)  /* 160 */
-	CALL(sys_sched_rr_get_interval)
-	CALL(sys_nanosleep)
-	CALL(sys_ni_syscall)		/* sys_mremap */
-	CALL(sys_setresuid16)
-	CALL(sys_getresuid16)		/* 165 */
-	CALL(sys_ni_syscall)		/* for vm86 */
-	CALL(sys_ni_syscall)		/* sys_query_module */
-	CALL(sys_poll)
-	CALL(sys_ni_syscall)		/* old nfsservctl */
-	CALL(sys_setresgid16)		/* 170 */
-	CALL(sys_getresgid16)
-	CALL(sys_prctl)
-	CALL(sys_rt_sigreturn)
-	CALL(sys_rt_sigaction)
-	CALL(sys_rt_sigprocmask)	/* 175 */
-	CALL(sys_rt_sigpending)
-	CALL(sys_rt_sigtimedwait)
-	CALL(sys_rt_sigqueueinfo)
-	CALL(sys_rt_sigsuspend)
-	CALL(sys_pread64)		/* 180 */
-	CALL(sys_pwrite64)
-	CALL(sys_lchown16);
-	CALL(sys_getcwd)
-	CALL(sys_capget)
-	CALL(sys_capset)		/* 185 */
-	CALL(sys_sigaltstack)
-	CALL(sys_sendfile)
-	CALL(sys_ni_syscall)		/* streams1 */
-	CALL(sys_ni_syscall)		/* streams2 */
-	CALL(sys_vfork)			/* 190 */
-	CALL(sys_getrlimit)
-	CALL(sys_mmap_pgoff)
-	CALL(sys_truncate64)
-	CALL(sys_ftruncate64)
-	CALL(sys_stat64)		/* 195 */
-	CALL(sys_lstat64)
-	CALL(sys_fstat64)
-	CALL(sys_chown)
-	CALL(sys_getuid)
-	CALL(sys_getgid)		/* 200 */
-	CALL(sys_geteuid)
-	CALL(sys_getegid)
-	CALL(sys_setreuid)
-	CALL(sys_setregid)
-	CALL(sys_getgroups)		/* 205 */
-	CALL(sys_setgroups)
-	CALL(sys_fchown)
-	CALL(sys_setresuid)
-	CALL(sys_getresuid)
-	CALL(sys_setresgid)		/* 210 */
-	CALL(sys_getresgid)
-	CALL(sys_lchown)
-	CALL(sys_setuid)
-	CALL(sys_setgid)
-	CALL(sys_setfsuid)		/* 215 */
-	CALL(sys_setfsgid)
-	CALL(sys_pivot_root)
-	CALL(sys_ni_syscall)
-	CALL(sys_ni_syscall)
-	CALL(sys_getdents64)		/* 220 */
-	CALL(sys_fcntl64)
-	CALL(sys_ni_syscall)		/* reserved TUX */
-	CALL(sys_ni_syscall)		/* reserved Security */
-	CALL(sys_gettid)
-	CALL(sys_readahead)		/* 225 */
-	CALL(sys_setxattr)
-	CALL(sys_lsetxattr)
-	CALL(sys_fsetxattr)
-	CALL(sys_getxattr)
-	CALL(sys_lgetxattr)		/* 230 */
-	CALL(sys_fgetxattr)
-	CALL(sys_listxattr)
-	CALL(sys_llistxattr)
-	CALL(sys_flistxattr)
-	CALL(sys_removexattr)		/* 235 */
-	CALL(sys_lremovexattr)
-	CALL(sys_fremovexattr)
-	CALL(sys_tkill)
-	CALL(sys_sendfile64)
-	CALL(sys_futex)			/* 240 */
-	CALL(sys_sched_setaffinity)
-	CALL(sys_sched_getaffinity)
-	CALL(sys_ni_syscall)
-	CALL(sys_ni_syscall)
-	CALL(sys_io_setup)		/* 245 */
-	CALL(sys_io_destroy)
-	CALL(sys_io_getevents)
-	CALL(sys_io_submit)
-	CALL(sys_io_cancel)
-	CALL(sys_fadvise64)		/* 250 */
-	CALL(sys_ni_syscall)
-	CALL(sys_exit_group)
-	CALL(sys_lookup_dcookie)
-	CALL(sys_epoll_create)
-	CALL(sys_epoll_ctl)		/* 255 */
-	CALL(sys_epoll_wait)
-	CALL(sys_ni_syscall)		/* sys_remap_file_pages */
-	CALL(sys_set_tid_address)
-	CALL(sys_timer_create)
-	CALL(sys_timer_settime)		/* 260 */
-	CALL(sys_timer_gettime)
-	CALL(sys_timer_getoverrun)
-	CALL(sys_timer_delete)
-	CALL(sys_clock_settime)
-	CALL(sys_clock_gettime)		/* 265 */
-	CALL(sys_clock_getres)
-	CALL(sys_clock_nanosleep)
-	CALL(sys_statfs64)
-	CALL(sys_fstatfs64)
-	CALL(sys_tgkill)		/* 270 */
-	CALL(sys_utimes)
-	CALL(sys_fadvise64_64)
-	CALL(sys_ni_syscall)		/* sys_vserver */
-	CALL(sys_ni_syscall)
-	CALL(sys_get_mempolicy)		/* 275 */
-	CALL(sys_set_mempolicy)
-	CALL(sys_mq_open)
-	CALL(sys_mq_unlink)
-	CALL(sys_mq_timedsend)
-	CALL(sys_mq_timedreceive)	/* 280 */
-	CALL(sys_mq_notify)
-	CALL(sys_mq_getsetattr)
-	CALL(sys_waitid)
-	CALL(sys_ni_syscall)		/* sys_kexec_load */
-	CALL(sys_add_key) 		/* 285 */
-	CALL(sys_request_key)
-	CALL(sys_keyctl)
-	CALL(sys_ioprio_set)
-	CALL(sys_ioprio_get)		/* 290 */
-	CALL(sys_inotify_init)
-	CALL(sys_inotify_add_watch)
-	CALL(sys_inotify_rm_watch)
-	CALL(sys_migrate_pages)
-	CALL(sys_openat)		/* 295 */
-	CALL(sys_mkdirat)
-	CALL(sys_mknodat)
-	CALL(sys_fchownat)
-	CALL(sys_futimesat)
-	CALL(sys_fstatat64)		/* 300 */
-	CALL(sys_unlinkat)
-	CALL(sys_renameat)
-	CALL(sys_linkat)
-	CALL(sys_symlinkat)
-	CALL(sys_readlinkat)		/* 305 */
-	CALL(sys_fchmodat)
-	CALL(sys_faccessat)
-	CALL(sys_ni_syscall)		/* sys_pselect6 */
-	CALL(sys_ni_syscall)		/* sys_ppoll */
-	CALL(sys_unshare)		/* 310 */
-	CALL(sys_set_robust_list)
-	CALL(sys_get_robust_list)
-	CALL(sys_splice)
-	CALL(sys_sync_file_range)
-	CALL(sys_tee)			/* 315 */
-	CALL(sys_vmsplice)
-	CALL(sys_ni_syscall)		/* sys_move_pages */
-	CALL(sys_getcpu)
-	CALL(sys_ni_syscall)		/* sys_epoll_pwait */
-	CALL(sys_setns)			/* 320 */
diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c
deleted file mode 100644
index e0f74191d553..000000000000
--- a/arch/h8300/kernel/time.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- *  linux/arch/h8300/kernel/time.c
- *
- *  Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- *  Copied/hacked from:
- *
- *  linux/arch/m68k/kernel/time.c
- *
- *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
- *
- * This file contains the m68k-specific time handling details.
- * Most of the stuff is located in the machine specific files.
- *
- * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
- *		"A Kernel Model for Precision Timekeeping" by Dave Mills
- */
-
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/timex.h>
-#include <linux/profile.h>
-
-#include <asm/io.h>
-#include <asm/irq_regs.h>
-#include <asm/timer.h>
-
-#define	TICK_SIZE (tick_nsec / 1000)
-
-void h8300_timer_tick(void)
-{
-	if (current->pid)
-		profile_tick(CPU_PROFILING);
-	xtime_update(1);
-	update_process_times(user_mode(get_irq_regs()));
-}
-
-void read_persistent_clock(struct timespec *ts)
-{
-	unsigned int year, mon, day, hour, min, sec;
-
-	/* FIX by dqg : Set to zero for platforms that don't have tod */
-	/* without this time is undefined and can overflow time_t, causing  */
-	/* very strange errors */
-	year = 1980;
-	mon = day = 1;
-	hour = min = sec = 0;
-#ifdef CONFIG_H8300_GETTOD
-	h8300_gettod (&year, &mon, &day, &hour, &min, &sec);
-#endif
-	if ((year += 1900) < 1970)
-		year += 100;
-	ts->tv_sec = mktime(year, mon, day, hour, min, sec);
-	ts->tv_nsec = 0;
-}
-
-void __init time_init(void)
-{
-
-	h8300_timer_setup();
-}
diff --git a/arch/h8300/kernel/timer/Makefile b/arch/h8300/kernel/timer/Makefile
deleted file mode 100644
index bef0510ea6ad..000000000000
--- a/arch/h8300/kernel/timer/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# h8300 internal timer handler
-
-obj-$(CONFIG_H8300_TIMER8)  := timer8.o
-obj-$(CONFIG_H8300_TIMER16) := timer16.o
-obj-$(CONFIG_H8300_ITU)     := itu.o
-obj-$(CONFIG_H8300_TPU)     := tpu.o
diff --git a/arch/h8300/kernel/timer/itu.c b/arch/h8300/kernel/timer/itu.c
deleted file mode 100644
index 0a8b5cd5bf38..000000000000
--- a/arch/h8300/kernel/timer/itu.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- *  linux/arch/h8300/kernel/timer/itu.c
- *
- *  Yoshinori Sato <ysato@users.sourcefoge.jp>
- *
- *  ITU Timer Handler
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-
-#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/regs306x.h>
-
-#if CONFIG_H8300_ITU_CH == 0
-#define ITUBASE	0xffff64
-#define ITUIRQ	24
-#elif CONFIG_H8300_ITU_CH == 1
-#define ITUBASE	0xffff6e
-#define ITUIRQ	28
-#elif CONFIG_H8300_ITU_CH == 2
-#define ITUBASE	0xffff78
-#define ITUIRQ	32
-#elif CONFIG_H8300_ITU_CH == 3
-#define ITUBASE	0xffff82
-#define ITUIRQ	36
-#elif CONFIG_H8300_ITU_CH == 4
-#define ITUBASE	0xffff92
-#define ITUIRQ	40
-#else
-#error Unknown timer channel.
-#endif
-
-#define TCR	0
-#define TIOR	1
-#define TIER	2
-#define TSR	3
-#define TCNT	4
-#define GRA	6
-#define GRB	8
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	h8300_timer_tick();
-	ctrl_bclr(IMFA, ITUBASE + TSR);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction itu_irq = {
-	.name		= "itu",
-	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-};
-
-static const int __initconst divide_rate[] = {1, 2, 4, 8};
-
-void __init h8300_timer_setup(void)
-{
-	unsigned int div;
-	unsigned int cnt;
-
-	calc_param(cnt, div, divide_rate, 0x10000);
-
-	setup_irq(ITUIRQ, &itu_irq);
-
-	/* initialize timer */
-	ctrl_outb(0, TSTR);
-	ctrl_outb(CCLR0 | div, ITUBASE + TCR);
-	ctrl_outb(0x01, ITUBASE + TIER);
-	ctrl_outw(cnt, ITUBASE + GRA);
-	ctrl_bset(CONFIG_H8300_ITU_CH, TSTR);
-}
diff --git a/arch/h8300/kernel/timer/timer16.c b/arch/h8300/kernel/timer/timer16.c
deleted file mode 100644
index 462d9f581719..000000000000
--- a/arch/h8300/kernel/timer/timer16.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *  linux/arch/h8300/kernel/timer/timer16.c
- *
- *  Yoshinori Sato <ysato@users.sourcefoge.jp>
- *
- *  16bit Timer Handler
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-
-#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/regs306x.h>
-
-/* 16bit timer */
-#if CONFIG_H8300_TIMER16_CH == 0
-#define _16BASE	0xffff78
-#define _16IRQ	24
-#elif CONFIG_H8300_TIMER16_CH == 1
-#define _16BASE	0xffff80
-#define _16IRQ	28
-#elif CONFIG_H8300_TIMER16_CH == 2
-#define _16BASE	0xffff88
-#define _16IRQ	32
-#else
-#error Unknown timer channel.
-#endif
-
-#define TCR	0
-#define TIOR	1
-#define TCNT	2
-#define GRA	4
-#define GRB	6
-
-#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*10000 /* Timer input freq. */
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	h8300_timer_tick();
-	ctrl_bclr(CONFIG_H8300_TIMER16_CH, TISRA);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction timer16_irq = {
-	.name		= "timer-16",
-	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-};
-
-static const int __initconst divide_rate[] = {1, 2, 4, 8};
-
-void __init h8300_timer_setup(void)
-{
-	unsigned int div;
-	unsigned int cnt;
-
-	calc_param(cnt, div, divide_rate, 0x10000);
-
-	setup_irq(_16IRQ, &timer16_irq);
-
-	/* initialize timer */
-	ctrl_outb(0, TSTR);
-	ctrl_outb(CCLR0 | div, _16BASE + TCR);
-	ctrl_outw(cnt, _16BASE + GRA);
-	ctrl_bset(4 + CONFIG_H8300_TIMER16_CH, TISRA);
-	ctrl_bset(CONFIG_H8300_TIMER16_CH, TSTR);
-}
diff --git a/arch/h8300/kernel/timer/timer8.c b/arch/h8300/kernel/timer/timer8.c
deleted file mode 100644
index 505f3415b40f..000000000000
--- a/arch/h8300/kernel/timer/timer8.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- *  linux/arch/h8300/kernel/cpu/timer/timer8.c
- *
- *  Yoshinori Sato <ysato@users.sourcefoge.jp>
- *
- *  8bit Timer Handler
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/timer.h>
-#if defined(CONFIG_CPU_H8300H)
-#include <asm/regs306x.h>
-#endif
-#if defined(CONFIG_CPU_H8S)
-#include <asm/regs267x.h>
-#endif
-
-/* 8bit timer x2 */
-#define CMFA	6
-
-#if defined(CONFIG_H8300_TIMER8_CH0)
-#define _8BASE	_8TCR0
-#ifdef CONFIG_CPU_H8300H
-#define _8IRQ	36
-#endif
-#ifdef CONFIG_CPU_H8S
-#define _8IRQ	72
-#endif
-#elif defined(CONFIG_H8300_TIMER8_CH2)
-#ifdef CONFIG_CPU_H8300H
-#define _8BASE	_8TCR2
-#define _8IRQ	40
-#endif
-#endif
-
-#ifndef _8BASE
-#error Unknown timer channel.
-#endif
-
-#define _8TCR	0
-#define _8TCSR	2
-#define TCORA	4
-#define TCORB	6
-#define _8TCNT	8
-
-#define CMIEA	0x40
-#define CCLR_CMA 0x08
-#define CKS2	0x04
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "xtime_update()" routine every clocktick
- */
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	h8300_timer_tick();
-	ctrl_bclr(CMFA, _8BASE + _8TCSR);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction timer8_irq = {
-	.name		= "timer-8",
-	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-};
-
-static const int __initconst divide_rate[] = {8, 64, 8192};
-
-void __init h8300_timer_setup(void)
-{
-	unsigned int div;
-	unsigned int cnt;
-
-	calc_param(cnt, div, divide_rate, 0x10000);
-	div++;
-
-	setup_irq(_8IRQ, &timer8_irq);
-
-#if defined(CONFIG_CPU_H8S)
-	/* Timer module enable */
-	ctrl_bclr(0, MSTPCRL)
-#endif
-
-	/* initialize timer */
-	ctrl_outw(cnt, _8BASE + TCORA);
-	ctrl_outw(0x0000, _8BASE + _8TCSR);
-	ctrl_outw((CMIEA|CCLR_CMA|CKS2) << 8 | div,
-		  _8BASE + _8TCR);
-}
diff --git a/arch/h8300/kernel/timer/tpu.c b/arch/h8300/kernel/timer/tpu.c
deleted file mode 100644
index 0350f6204ecf..000000000000
--- a/arch/h8300/kernel/timer/tpu.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- *  linux/arch/h8300/kernel/timer/tpu.c
- *
- *  Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- *  TPU Timer Handler
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-
-#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/regs267x.h>
-
-/* TPU */
-#if CONFIG_H8300_TPU_CH == 0
-#define TPUBASE	0xffffd0
-#define TPUIRQ	40
-#elif CONFIG_H8300_TPU_CH == 1
-#define TPUBASE	0xffffe0
-#define TPUIRQ	48
-#elif CONFIG_H8300_TPU_CH == 2
-#define TPUBASE	0xfffff0
-#define TPUIRQ	52
-#elif CONFIG_H8300_TPU_CH == 3
-#define TPUBASE	0xfffe80
-#define TPUIRQ	56
-#elif CONFIG_H8300_TPU_CH == 4
-#define TPUBASE	0xfffe90
-#define TPUIRQ	64
-#else
-#error Unknown timer channel.
-#endif
-
-#define _TCR	0
-#define _TMDR	1
-#define _TIOR	2
-#define _TIER	4
-#define _TSR	5
-#define _TCNT	6
-#define _GRA	8
-#define _GRB	10
-
-#define CCLR0	0x20
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	h8300_timer_tick();
-	ctrl_bclr(0, TPUBASE + _TSR);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction tpu_irq = {
-	.name		= "tpu",
-	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-};
-
-static const int __initconst divide_rate[] = {
-#if CONFIG_H8300_TPU_CH == 0
-	1,4,16,64,0,0,0,0,
-#elif (CONFIG_H8300_TPU_CH == 1) || (CONFIG_H8300_TPU_CH == 5)
-	1,4,16,64,0,0,256,0,
-#elif (CONFIG_H8300_TPU_CH == 2) || (CONFIG_H8300_TPU_CH == 4)
-	1,4,16,64,0,0,0,1024,
-#elif CONFIG_H8300_TPU_CH == 3
-	1,4,16,64,0,1024,256,4096,
-#endif
-};
-
-void __init h8300_timer_setup(void)
-{
-	unsigned int cnt;
-	unsigned int div;
-
-	calc_param(cnt, div, divide_rate, 0x10000);
-
-	setup_irq(TPUIRQ, &tpu_irq);
-
-	/* TPU module enabled */
-	ctrl_bclr(3, MSTPCRH);
-
-	ctrl_outb(0, TSTR);
-	ctrl_outb(CCLR0 | div, TPUBASE + _TCR);
-	ctrl_outb(0, TPUBASE + _TMDR);
-	ctrl_outw(0, TPUBASE + _TIOR);
-	ctrl_outb(0x01, TPUBASE + _TIER);
-	ctrl_outw(cnt, TPUBASE + _GRA);
-	ctrl_bset(CONFIG_H8300_TPU_CH, TSTR);
-}
diff --git a/arch/h8300/kernel/traps.c b/arch/h8300/kernel/traps.c
deleted file mode 100644
index cfe494dbe3da..000000000000
--- a/arch/h8300/kernel/traps.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * linux/arch/h8300/boot/traps.c -- general exception handling code
- * H8/300 support Yoshinori Sato <ysato@users.sourceforge.jp>
- * 
- * Cloned from Linux/m68k.
- *
- * No original Copyright holder listed,
- * Probable original (C) Roman Zippel (assigned DJD, 1999)
- *
- * Copyright 1999-2000 D. Jeff Dionne, <jeff@rt-control.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/bug.h>
-
-#include <asm/irq.h>
-#include <asm/traps.h>
-#include <asm/page.h>
-
-static DEFINE_SPINLOCK(die_lock);
-
-/*
- * this must be called very early as the kernel might
- * use some instruction that are emulated on the 060
- */
-
-void __init base_trap_init(void)
-{
-}
-
-void __init trap_init (void)
-{
-}
-
-asmlinkage void set_esp0 (unsigned long ssp)
-{
-	current->thread.esp0 = ssp;
-}
-
-/*
- *	Generic dumping code. Used for panic and debug.
- */
-
-static void dump(struct pt_regs *fp)
-{
-	unsigned long	*sp;
-	unsigned char	*tp;
-	int		i;
-
-	printk("\nCURRENT PROCESS:\n\n");
-	printk("COMM=%s PID=%d\n", current->comm, current->pid);
-	if (current->mm) {
-		printk("TEXT=%08x-%08x DATA=%08x-%08x BSS=%08x-%08x\n",
-			(int) current->mm->start_code,
-			(int) current->mm->end_code,
-			(int) current->mm->start_data,
-			(int) current->mm->end_data,
-			(int) current->mm->end_data,
-			(int) current->mm->brk);
-		printk("USER-STACK=%08x  KERNEL-STACK=%08lx\n\n",
-			(int) current->mm->start_stack,
-			(int) PAGE_SIZE+(unsigned long)current);
-	}
-
-	show_regs(fp);
-	printk("\nCODE:");
-	tp = ((unsigned char *) fp->pc) - 0x20;
-	for (sp = (unsigned long *) tp, i = 0; (i < 0x40);  i += 4) {
-		if ((i % 0x10) == 0)
-			printk("\n%08x: ", (int) (tp + i));
-		printk("%08x ", (int) *sp++);
-	}
-	printk("\n");
-
-	printk("\nKERNEL STACK:");
-	tp = ((unsigned char *) fp) - 0x40;
-	for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) {
-		if ((i % 0x10) == 0)
-			printk("\n%08x: ", (int) (tp + i));
-		printk("%08x ", (int) *sp++);
-	}
-	printk("\n");
-	if (STACK_MAGIC != *(unsigned long *)((unsigned long)current+PAGE_SIZE))
-                printk("(Possibly corrupted stack page??)\n");
-
-	printk("\n\n");
-}
-
-void die(const char *str, struct pt_regs *fp, unsigned long err)
-{
-	static int diecount;
-
-	oops_enter();
-
-	console_verbose();
-	spin_lock_irq(&die_lock);
-	report_bug(fp->pc, fp);
-	printk(KERN_EMERG "%s: %04lx [#%d] ", str, err & 0xffff, ++diecount);
-	dump(fp);
-
-	spin_unlock_irq(&die_lock);
-	do_exit(SIGSEGV);
-}
-
-extern char _start, _etext;
-#define check_kernel_text(addr) \
-        ((addr >= (unsigned long)(&_start)) && \
-         (addr <  (unsigned long)(&_etext))) 
-
-static int kstack_depth_to_print = 24;
-
-void show_stack(struct task_struct *task, unsigned long *esp)
-{
-	unsigned long *stack,  addr;
-	int i;
-
-	if (esp == NULL)
-		esp = (unsigned long *) &esp;
-
-	stack = esp;
-
-	printk("Stack from %08lx:", (unsigned long)stack);
-	for (i = 0; i < kstack_depth_to_print; i++) {
-		if (((unsigned long)stack & (THREAD_SIZE - 1)) == 0)
-			break;
-		if (i % 8 == 0)
-			printk("\n       ");
-		printk(" %08lx", *stack++);
-	}
-
-	printk("\nCall Trace:");
-	i = 0;
-	stack = esp;
-	while (((unsigned long)stack & (THREAD_SIZE - 1)) != 0) {
-		addr = *stack++;
-		/*
-		 * If the address is either in the text segment of the
-		 * kernel, or in the region which contains vmalloc'ed
-		 * memory, it *may* be the address of a calling
-		 * routine; if so, print it so that someone tracing
-		 * down the cause of the crash will be able to figure
-		 * out the call path that was taken.
-		 */
-		if (check_kernel_text(addr)) {
-			if (i % 4 == 0)
-				printk("\n       ");
-			printk(" [<%08lx>]", addr);
-			i++;
-		}
-	}
-	printk("\n");
-}
-
-void show_trace_task(struct task_struct *tsk)
-{
-	show_stack(tsk,(unsigned long *)tsk->thread.esp0);
-}
diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S
deleted file mode 100644
index 3253fed42ac1..000000000000
--- a/arch/h8300/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,157 +0,0 @@
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/page.h>
-
-/* target memory map */
-#ifdef CONFIG_H8300H_GENERIC
-#define ROMTOP  0x000000
-#define ROMSIZE 0x400000
-#define RAMTOP  0x400000
-#define RAMSIZE 0x400000
-#endif
-
-#ifdef CONFIG_H8300H_AKI3068NET
-#define ROMTOP  0x000000
-#define ROMSIZE 0x080000
-#define RAMTOP  0x400000
-#define RAMSIZE 0x200000
-#endif
-
-#ifdef CONFIG_H8300H_H8MAX
-#define ROMTOP  0x000000
-#define ROMSIZE 0x080000
-#define RAMTOP  0x400000
-#define RAMSIZE 0x200000
-#endif
-
-#ifdef CONFIG_H8300H_SIM
-#define ROMTOP  0x000000
-#define ROMSIZE 0x400000
-#define RAMTOP  0x400000
-#define RAMSIZE 0x400000
-#endif
-
-#ifdef CONFIG_H8S_SIM
-#define ROMTOP  0x000000
-#define ROMSIZE 0x400000
-#define RAMTOP  0x400000
-#define RAMSIZE 0x800000
-#endif
-
-#ifdef CONFIG_H8S_EDOSK2674
-#define ROMTOP  0x000000
-#define ROMSIZE 0x400000
-#define RAMTOP  0x400000
-#define RAMSIZE 0x800000
-#endif
-
-#if defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)
-INPUT(romfs.o)
-#endif
-
-_jiffies = _jiffies_64 + 4;
-
-ENTRY(__start)
-
-SECTIONS
-{
-#if defined(CONFIG_ROMKERNEL)
-	. = ROMTOP; 
-	.vectors :
-	{
-	__vector = . ;
-		*(.vectors*)
-	}
-#else
-	. = RAMTOP; 
-	.bootvec :	
-	{
-		*(.bootvec)
-	}
-#endif
-        .text :
-	{
-	_text = .;
-#if defined(CONFIG_ROMKERNEL)
-	*(.int_redirect)
-#endif
-	__stext = . ;
-	TEXT_TEXT
-	SCHED_TEXT
-	LOCK_TEXT
-	__etext = . ;
-	}
-	EXCEPTION_TABLE(16)
-
-	RODATA
-#if defined(CONFIG_ROMKERNEL)
-	SECURITY_INIT
-#endif
-	ROEND = .; 
-#if defined(CONFIG_ROMKERNEL)
-	. = RAMTOP;
-	.data :	AT(ROEND)
-#else
-	.data :	
-#endif
-	{
-	__sdata = . ;
-	___data_start = . ;
-
-	INIT_TASK_DATA(0x2000)
-	. = ALIGN(0x4) ;
-		DATA_DATA
-	. = ALIGN(0x4) ;
-		*(.data.*)	
-
-	. = ALIGN(0x4) ;
-	___init_begin = .;
-	__sinittext = .; 
-		INIT_TEXT
-	__einittext = .; 
-		INIT_DATA
-	. = ALIGN(0x4) ;
-	INIT_SETUP(0x4)
-	___setup_start = .;
-		*(.init.setup)
-	. = ALIGN(0x4) ;
-	___setup_end = .;
-	INIT_CALLS
-	CON_INITCALL
-		EXIT_TEXT
-		EXIT_DATA
-	INIT_RAM_FS
-	. = ALIGN(0x4) ;
-	___init_end = .;
-	__edata = . ;
-	}
-#if defined(CONFIG_RAMKERNEL)
-	SECURITY_INIT
-#endif
-	__begin_data = LOADADDR(.data);
-        .bss : 
-        {
-	. = ALIGN(0x4) ;
-	__sbss = . ;
-	___bss_start = . ;
-		*(.bss*)
-	. = ALIGN(0x4) ;
-		*(COMMON)
-	. = ALIGN(0x4) ;
-	___bss_stop = . ;
-	__ebss = . ;
-	__end = . ;
-	__ramstart = .;
-	}
-        .romfs :	
-	{
-		*(.romfs*)
-	}
-	. = RAMTOP+RAMSIZE;
-        .dummy :
-        {
-	COMMAND_START = . - 0x200 ;
-	__ramend = . ;
-	}
-
-	DISCARDS
-}
diff --git a/arch/h8300/lib/Makefile b/arch/h8300/lib/Makefile
deleted file mode 100644
index 1577f5075b10..000000000000
--- a/arch/h8300/lib/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for H8/300-specific library files..
-#
-
-lib-y  = ashrdi3.o checksum.o memcpy.o memset.o abs.o romfs.o
diff --git a/arch/h8300/lib/abs.S b/arch/h8300/lib/abs.S
deleted file mode 100644
index ddd1fb3d01ad..000000000000
--- a/arch/h8300/lib/abs.S
+++ /dev/null
@@ -1,21 +0,0 @@
-;;; abs.S
-
-#include <asm/linkage.h>
-
-#if defined(__H8300H__) 
-	.h8300h
-#endif
-#if defined(__H8300S__) 
-	.h8300s
-#endif
-	.text
-.global _abs
-
-;;; int abs(int n)
-_abs:
-	mov.l	er0,er0
-	bpl	1f
-	neg.l	er0
-1:
-	rts
-	
diff --git a/arch/h8300/lib/ashrdi3.c b/arch/h8300/lib/ashrdi3.c
deleted file mode 100644
index 78efb65e315a..000000000000
--- a/arch/h8300/lib/ashrdi3.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define BITS_PER_UNIT 8
-
-typedef 	 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__ashrdi3 (DItype u, word_type b)
-{
-  DIunion w;
-  word_type bm;
-  DIunion uu;
-
-  if (b == 0)
-    return u;
-
-  uu.ll = u;
-
-  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-  if (bm <= 0)
-    {
-      /* w.s.high = 1..1 or 0..0 */
-      w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1);
-      w.s.low = uu.s.high >> -bm;
-    }
-  else
-    {
-      USItype carries = (USItype)uu.s.high << bm;
-      w.s.high = uu.s.high >> b;
-      w.s.low = ((USItype)uu.s.low >> b) | carries;
-    }
-
-  return w.ll;
-}
diff --git a/arch/h8300/lib/checksum.c b/arch/h8300/lib/checksum.c
deleted file mode 100644
index bdc5b032acd6..000000000000
--- a/arch/h8300/lib/checksum.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		IP/TCP/UDP checksumming routines
- *
- * Authors:	Jorge Cwik, <jorge@laser.satlink.net>
- *		Arnt Gulbrandsen, <agulbra@nvg.unit.no>
- *		Tom May, <ftom@netcom.com>
- *		Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
- *		Lots of code moved from tcp.c and ip.c; see those files
- *		for more names.
- *
- * 03/02/96	Jes Sorensen, Andreas Schwab, Roman Hodek:
- *		Fixed some nasty bugs, causing some horrible crashes.
- *		A: At some points, the sum (%0) was used as
- *		length-counter instead of the length counter
- *		(%1). Thanks to Roman Hodek for pointing this out.
- *		B: GCC seems to mess up if one uses too many
- *		data-registers to hold input values and one tries to
- *		specify d0 and d1 as scratch registers. Letting gcc choose these
- *      registers itself solves the problem.
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
- 
-/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access kills, so most
-   of the assembly has to go. */
-
-#include <net/checksum.h>
-#include <linux/module.h>
-
-static inline unsigned short from32to16(unsigned long x)
-{
-	/* add up 16-bit and 16-bit for 16+c bit */
-	x = (x & 0xffff) + (x >> 16);
-	/* add up carry.. */
-	x = (x & 0xffff) + (x >> 16);
-	return x;
-}
-
-static unsigned long do_csum(const unsigned char * buff, int len)
-{
-	int odd, count;
-	unsigned long result = 0;
-
-	if (len <= 0)
-		goto out;
-	odd = 1 & (unsigned long) buff;
-	if (odd) {
-		result = *buff;
-		len--;
-		buff++;
-	}
-	count = len >> 1;		/* nr of 16-bit words.. */
-	if (count) {
-		if (2 & (unsigned long) buff) {
-			result += *(unsigned short *) buff;
-			count--;
-			len -= 2;
-			buff += 2;
-		}
-		count >>= 1;		/* nr of 32-bit words.. */
-		if (count) {
-		        unsigned long carry = 0;
-			do {
-				unsigned long w = *(unsigned long *) buff;
-				count--;
-				buff += 4;
-				result += carry;
-				result += w;
-				carry = (w > result);
-			} while (count);
-			result += carry;
-			result = (result & 0xffff) + (result >> 16);
-		}
-		if (len & 2) {
-			result += *(unsigned short *) buff;
-			buff += 2;
-		}
-	}
-	if (len & 1)
-		result += (*buff << 8);
-	result = from32to16(result);
-	if (odd)
-		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-out:
-	return result;
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	return (__force __sum16)~do_csum(iph,ihl*4);
-}
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-/*
- * Egads...  That thing apparently assumes that *all* checksums it ever sees will
- * be folded.  Very likely a bug.
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum)
-{
-	unsigned int result = do_csum(buff, len);
-
-	/* add in old sum, and carry.. */
-	result += (__force u32)sum;
-	/* 16+c bits -> 16 bits */
-	result = (result & 0xffff) + (result >> 16);
-	return (__force __wsum)result;
-}
-
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
-	return (__force __sum16)~do_csum(buff,len);
-}
-
-/*
- * copy from fs while checksumming, otherwise like csum_partial
- */
-
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst, int len,
-			    __wsum sum, int *csum_err)
-{
-	if (csum_err) *csum_err = 0;
-	memcpy(dst, (__force const void *)src, len);
-	return csum_partial(dst, len, sum);
-}
-
-/*
- * copy from ds while checksumming, otherwise like csum_partial
- */
-
-__wsum
-csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
-{
-	memcpy(dst, src, len);
-	return csum_partial(dst, len, sum);
-}
diff --git a/arch/h8300/lib/memcpy.S b/arch/h8300/lib/memcpy.S
deleted file mode 100644
index cad325e2c0e8..000000000000
--- a/arch/h8300/lib/memcpy.S
+++ /dev/null
@@ -1,84 +0,0 @@
-;;; memcpy.S
-
-#include <asm/linkage.h>
-
-#if defined(__H8300H__) 
-	.h8300h
-#endif
-#if defined(__H8300S__) 
-	.h8300s
-#endif
-
-	.text
-.global _memcpy
-
-;;; void *memcpy(void *to, void *from, size_t n)
-_memcpy:
-	mov.l	er2,er2
-	bne	1f
-	rts	
-1:	
-	;; address check
-	bld	#0,r0l
-	bxor	#0,r1l
-	bcs	4f
-	mov.l	er4,@-sp
-	mov.l	er0,@-sp
-	btst	#0,r0l
-	beq	1f
-	;; (aligned even) odd address
-	mov.b	@er1,r3l
-	mov.b	r3l,@er0
-	adds	#1,er1
-	adds	#1,er0
-	dec.l	#1,er2
-	beq	3f
-1:	
-	;; n < sizeof(unsigned long) check
-	sub.l	er4,er4
-	adds	#4,er4		; loop count check value
-	cmp.l	er4,er2
-	blo	2f
-	;; unsigned long copy
-1:	
-	mov.l	@er1,er3
-	mov.l	er3,@er0
-	adds	#4,er0
-	adds	#4,er1
-	subs	#4,er2
-	cmp.l	er4,er2
-	bcc	1b	
-	;; rest
-2:	
-	mov.l	er2,er2
-	beq	3f
-1:	
-	mov.b	@er1,r3l
-	mov.b	r3l,@er0
-	adds	#1,er1
-	adds	#1,er0
-	dec.l	#1,er2
-	bne	1b
-3:
-	mov.l	@sp+,er0
-	mov.l	@sp+,er4
-	rts
-
-	;; odd <- even / even <- odd
-4:	
-	mov.l	er4,er3
-	mov.l	er2,er4
-	mov.l	er5,er2
-	mov.l	er1,er5
-	mov.l	er6,er1
-	mov.l	er0,er6
-1:
-	eepmov.w
-	mov.w	r4,r4
-	bne	1b
-	dec.w	#1,e4
-	bpl	1b
-	mov.l	er1,er6
-	mov.l	er2,er5
-	mov.l	er3,er4
-	rts
diff --git a/arch/h8300/lib/memset.S b/arch/h8300/lib/memset.S
deleted file mode 100644
index 4549a64c5b79..000000000000
--- a/arch/h8300/lib/memset.S
+++ /dev/null
@@ -1,61 +0,0 @@
-/* memset.S */
-
-#include <asm/linkage.h>
-
-#if defined(__H8300H__) 
-	.h8300h
-#endif
-#if defined(__H8300S__) 
-	.h8300s
-#endif
-	.text
-
-.global	_memset
-
-;;void *memset(*ptr, int c, size_t count)
-;; ptr = er0
-;; c   = er1(r1l)
-;; count = er2
-_memset:
-	btst	#0,r0l
-	beq	2f
-
-	;; odd address
-1:
-	mov.b	r1l,@er0
-	adds	#1,er0
-	dec.l	#1,er2
-	beq	6f
-
-	;; even address
-2:
-	mov.l	er2,er3
-	cmp.l	#4,er2
-	blo	4f
-	;; count>=4 -> count/4
-#if defined(__H8300H__)
-	shlr.l	er2
-	shlr.l	er2
-#endif
-#if defined(__H8300S__)
-	shlr.l	#2,er2
-#endif
-	;; byte -> long
-	mov.b	r1l,r1h
-	mov.w	r1,e1
-3:
-	mov.l	er1,@er0
-	adds	#4,er0
-	dec.l	#1,er2
-	bne	3b
-4:
-	;; count % 4
-	and.b	#3,r3l
-	beq	6f
-5:
-	mov.b	r1l,@er0
-	adds	#1,er0
-	dec.b	r3l
-	bne	5b
-6:
-	rts
diff --git a/arch/h8300/lib/romfs.S b/arch/h8300/lib/romfs.S
deleted file mode 100644
index 68910d8e1ff4..000000000000
--- a/arch/h8300/lib/romfs.S
+++ /dev/null
@@ -1,57 +0,0 @@
-/* romfs move to __ebss */
-
-#include <asm/linkage.h>
-
-#if defined(__H8300H__) 
-	.h8300h
-#endif
-#if defined(__H8300S__) 
-	.h8300s
-#endif
-
-#define BLKOFFSET 512
-
-	.text
-.globl	__move_romfs
-_romfs_sig_len = 8
-
-__move_romfs:	
-	mov.l	#__sbss,er0
-	mov.l	#_romfs_sig,er1
-	mov.b	#_romfs_sig_len,r3l
-1:					/* check romfs image */
-	mov.b	@er0+,r2l
-	mov.b	@er1+,r2h
-	cmp.b	r2l,r2h
-	bne	2f
-	dec.b	r3l
-	bne	1b
-
-	/* find romfs image */
-	mov.l	@__sbss+8,er0		/* romfs length(be) */
-	mov.l	#__sbss,er1
-	add.l	er0,er1			/* romfs image end */
-	mov.l	#__ebss,er2
-	add.l	er0,er2			/* distination address */
-#if defined(CONFIG_INTELFLASH)
-	add.l	#BLKOFFSET,er2
-#endif
-	adds	#2,er0
-	adds	#1,er0
-	shlr	er0
-	shlr	er0			/* transfer length */
-1:
-	mov.l	@er1,er3		/* copy image */
-	mov.l	er3,@er2
-	subs	#4,er1
-	subs	#4,er2
-	dec.l	#1,er0
-	bpl	1b
-2:
-	rts
-
-	.section	.rodata
-_romfs_sig:	
-	.ascii	"-rom1fs-"
-
-	.end
diff --git a/arch/h8300/mm/Makefile b/arch/h8300/mm/Makefile
deleted file mode 100644
index 5f4bc42b6453..000000000000
--- a/arch/h8300/mm/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux m68k-specific parts of the memory manager.
-#
-
-obj-y	 := init.o fault.o memory.o kmap.o
diff --git a/arch/h8300/mm/fault.c b/arch/h8300/mm/fault.c
deleted file mode 100644
index 472535977006..000000000000
--- a/arch/h8300/mm/fault.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  linux/arch/h8300/mm/fault.c
- *
- *  Copyright (C) 1998  D. Jeff Dionne <jeff@lineo.ca>,
- *  Copyright (C) 2000  Lineo, Inc.  (www.lineo.com) 
- *
- *  Based on:
- *
- *  linux/arch/m68knommu/mm/fault.c
- *  linux/arch/m68k/mm/fault.c
- *
- *  Copyright (C) 1995  Hamish Macdonald
- */
-
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-
-#include <asm/pgtable.h>
-
-/*
- * This routine handles page faults.  It determines the problem, and
- * then passes it off to one of the appropriate routines.
- *
- * error_code:
- *	bit 0 == 0 means no page found, 1 means protection fault
- *	bit 1 == 0 means read, 1 means write
- *
- * If this routine detects a bad access, it returns 1, otherwise it
- * returns 0.
- */
-asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
-			      unsigned long error_code)
-{
-#ifdef DEBUG
-	printk ("regs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld\n",
-		regs->sr, regs->pc, address, error_code);
-#endif
-
-/*
- * Oops. The kernel tried to access some bad page. We'll have to
- * terminate things with extreme prejudice.
- */
-	if ((unsigned long) address < PAGE_SIZE) {
-		printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
-	} else
-		printk(KERN_ALERT "Unable to handle kernel access");
-	printk(" at virtual address %08lx\n",address);
-	if (!user_mode(regs))
-		die("Oops", regs, error_code);
-	do_exit(SIGKILL);
-
-	return 1;
-}
-
diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c
deleted file mode 100644
index 6c1251e491af..000000000000
--- a/arch/h8300/mm/init.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- *  linux/arch/h8300/mm/init.c
- *
- *  Copyright (C) 1998  D. Jeff Dionne <jeff@lineo.ca>,
- *                      Kenneth Albanowski <kjahds@kjahds.com>,
- *  Copyright (C) 2000  Lineo, Inc.  (www.lineo.com) 
- *
- *  Based on:
- *
- *  linux/arch/m68knommu/mm/init.c
- *  linux/arch/m68k/mm/init.c
- *
- *  Copyright (C) 1995  Hamish Macdonald
- *
- *  JAN/1999 -- hacked to support ColdFire (gerg@snapgear.com)
- *  DEC/2000 -- linux 2.4 support <davidm@snapgear.com>
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/init.h>
-#include <linux/highmem.h>
-#include <linux/pagemap.h>
-#include <linux/bootmem.h>
-#include <linux/gfp.h>
-
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/sections.h>
-
-#undef DEBUG
-
-/*
- * BAD_PAGE is the page that is used for page faults when linux
- * is out-of-memory. Older versions of linux just did a
- * do_exit(), but using this instead means there is less risk
- * for a process dying in kernel mode, possibly leaving a inode
- * unused etc..
- *
- * BAD_PAGETABLE is the accompanying page-table: it is initialized
- * to point to BAD_PAGE entries.
- *
- * ZERO_PAGE is a special page that is used for zero-initialized
- * data and COW.
- */
-static unsigned long empty_bad_page_table;
-
-static unsigned long empty_bad_page;
-
-unsigned long empty_zero_page;
-
-extern unsigned long rom_length;
-
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
-/*
- * paging_init() continues the virtual memory environment setup which
- * was begun by the code in arch/head.S.
- * The parameters are pointers to where to stick the starting and ending
- * addresses of available kernel virtual memory.
- */
-void __init paging_init(void)
-{
-	/*
-	 * Make sure start_mem is page aligned,  otherwise bootmem and
-	 * page_alloc get different views og the world.
-	 */
-#ifdef DEBUG
-	unsigned long start_mem = PAGE_ALIGN(memory_start);
-#endif
-	unsigned long end_mem   = memory_end & PAGE_MASK;
-
-#ifdef DEBUG
-	printk ("start_mem is %#lx\nvirtual_end is %#lx\n",
-		start_mem, end_mem);
-#endif
-
-	/*
-	 * Initialize the bad page table and bad page to point
-	 * to a couple of allocated pages.
-	 */
-	empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
-	empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
-	empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
-	memset((void *)empty_zero_page, 0, PAGE_SIZE);
-
-	/*
-	 * Set up SFC/DFC registers (user data space).
-	 */
-	set_fs (USER_DS);
-
-#ifdef DEBUG
-	printk ("before free_area_init\n");
-
-	printk ("free_area_init -> start_mem is %#lx\nvirtual_end is %#lx\n",
-		start_mem, end_mem);
-#endif
-
-	{
-		unsigned long zones_size[MAX_NR_ZONES] = {0, };
-
-		zones_size[ZONE_DMA]     = 0 >> PAGE_SHIFT;
-		zones_size[ZONE_NORMAL]  = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT;
-#ifdef CONFIG_HIGHMEM
-		zones_size[ZONE_HIGHMEM] = 0;
-#endif
-		free_area_init(zones_size);
-	}
-}
-
-void __init mem_init(void)
-{
-	unsigned long codesize = _etext - _stext;
-
-	pr_devel("Mem_init: start=%lx, end=%lx\n", memory_start, memory_end);
-
-	high_memory = (void *) (memory_end & PAGE_MASK);
-	max_mapnr = MAP_NR(high_memory);
-
-	/* this will put all low memory onto the freelists */
-	free_all_bootmem();
-
-	mem_init_print_info(NULL);
-	if (rom_length > 0 && rom_length > codesize)
-		pr_info("Memory available: %luK/%luK ROM\n",
-			(rom_length - codesize) >> 10, rom_length >> 10);
-}
-
-
-#ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
-{
-	free_reserved_area((void *)start, (void *)end, -1, "initrd");
-}
-#endif
-
-void
-free_initmem(void)
-{
-#ifdef CONFIG_RAMKERNEL
-	free_initmem_default(-1);
-#endif
-}
-
diff --git a/arch/h8300/mm/kmap.c b/arch/h8300/mm/kmap.c
deleted file mode 100644
index f79edcdadf39..000000000000
--- a/arch/h8300/mm/kmap.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- *  linux/arch/h8300/mm/kmap.c
- *  
- *  Based on
- *  linux/arch/m68knommu/mm/kmap.c
- *
- *  Copyright (C) 2000 Lineo, <davidm@snapgear.com>
- *  Copyright (C) 2000-2002 David McCullough <davidm@snapgear.com>
- */
-
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/vmalloc.h>
-
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm/io.h>
-
-#undef DEBUG
-
-#define VIRT_OFFSET (0x01000000)
-
-/*
- * Map some physical address range into the kernel address space.
- */
-void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag)
-{
-	return (void *)(physaddr + VIRT_OFFSET);
-}
-
-/*
- * Unmap a ioremap()ed region again.
- */
-void iounmap(void *addr)
-{
-}
-
-/*
- * __iounmap unmaps nearly everything, so be careful
- * it doesn't free currently pointer/page tables anymore but it
- * wans't used anyway and might be added later.
- */
-void __iounmap(void *addr, unsigned long size)
-{
-}
-
-/*
- * Set new cache mode for some kernel address space.
- * The caller must push data for that range itself, if such data may already
- * be in the cache.
- */
-void kernel_set_cachemode(void *addr, unsigned long size, int cmode)
-{
-}
diff --git a/arch/h8300/mm/memory.c b/arch/h8300/mm/memory.c
deleted file mode 100644
index 06e364641392..000000000000
--- a/arch/h8300/mm/memory.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *  linux/arch/h8300/mm/memory.c
- *
- *  Copyright (C) 2002  Yoshinori Sato <ysato@users.sourceforge.jp>,
- *
- *  Based on:
- *
- *  linux/arch/m68knommu/mm/memory.c
- *
- *  Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
- *  Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- *
- *  Based on:
- *
- *  linux/arch/m68k/mm/memory.c
- *
- *  Copyright (C) 1995  Hamish Macdonald
- */
-
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/traps.h>
-#include <asm/io.h>
-
-void cache_clear (unsigned long paddr, int len)
-{
-}
-
-
-void cache_push (unsigned long paddr, int len)
-{
-}
-
-void cache_push_v (unsigned long vaddr, int len)
-{
-}
-
-/*
- * Map some physical address range into the kernel address space.
- */
-
-unsigned long kernel_map(unsigned long paddr, unsigned long size,
-			 int nocacheflag, unsigned long *memavailp )
-{
-	return paddr;
-}
-
diff --git a/arch/h8300/platform/h8300h/Makefile b/arch/h8300/platform/h8300h/Makefile
deleted file mode 100644
index 420f73b0d962..000000000000
--- a/arch/h8300/platform/h8300h/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-# Reuse any files we can from the H8/300H
-#
-
-obj-y := irq.o ptrace_h8300h.o
diff --git a/arch/h8300/platform/h8300h/aki3068net/Makefile b/arch/h8300/platform/h8300h/aki3068net/Makefile
deleted file mode 100644
index b7ff78050b7f..000000000000
--- a/arch/h8300/platform/h8300h/aki3068net/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-y := crt0_ram.o
diff --git a/arch/h8300/platform/h8300h/aki3068net/crt0_ram.S b/arch/h8300/platform/h8300h/aki3068net/crt0_ram.S
deleted file mode 100644
index b2ad0f2d0417..000000000000
--- a/arch/h8300/platform/h8300h/aki3068net/crt0_ram.S
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- *  linux/arch/h8300/platform/h8300h/aki3068net/crt0_ram.S
- *
- *  Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- *  Platform depend startup
- *  Target Archtecture:	AE-3068 (aka. aki3068net)
- *  Memory Layout     :	RAM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-	
-#if !defined(CONFIG_BLKDEV_RESERVE)
-#if defined(CONFIG_GDB_DEBUG)
-#define RAMEND (__ramend - 0xc000)
-#else
-#define RAMEND __ramend
-#endif
-#else
-#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS
-#endif
-	
-	.global __start
-	.global _command_line
-	.global __platform_gpio_table
-	.global __target_name
-	
-	.h8300h
-
-	.section .text
-	.file	"crt0_ram.S"
-
-	/* CPU Reset entry */
-__start:
-	mov.l	#RAMEND,sp
-	ldc	#0x80,ccr
-
-	/* Peripheral Setup */
-	
-#if defined(CONFIG_MTD_UCLINUX)
-	/* move romfs image */
-	jsr	@__move_romfs	
-#endif
-	
-	/* .bss clear */
-	mov.l	#__sbss,er5
-	mov.l	#__ebss,er4
-	sub.l	er5,er4
-	shlr	er4
-	shlr	er4
-	sub.l	er0,er0
-1:	
-	mov.l	er0,@er5
-	adds	#4,er5
-	dec.l	#1,er4
-	bne	1b
-
-	/* copy kernel commandline */
-	mov.l	#COMMAND_START,er5
-	mov.l	#_command_line,er6
-	mov.w	#512,r4
-	eepmov.w
-
-	/* uClinux kernel start */
-	ldc	#0x90,ccr	/* running kernel */
-	mov.l	#_init_thread_union,sp
-	add.l	#0x2000,sp
-	jsr	@_start_kernel
-_exit:
-
-	jmp	_exit
-
-	rts
-
-	/* I/O port assign information */
-__platform_gpio_table:	
-	mov.l	#gpio_table,er0
-	rts
-
-gpio_table:
-	;; P1DDR
-	.byte	0xff,0xff
-	;; P2DDR
-	.byte	0xff,0xff
-	;; P3DDR
-	.byte	0xff,0x00
-	;; P4DDR
-	.byte	0x00,0x00
-	;; P5DDR
-	.byte	0x01,0x01
-	;; P6DDR
-	.byte	0x00,0x00
-	;; dummy
-	.byte	0x00,0x00
-	;; P8DDR
-	.byte	0x0c,0x0c
-	;; P9DDR
-	.byte	0x00,0x00
-	;; PADDR
-	.byte	0x00,0x00
-	;; PBDDR
-	.byte	0x30,0x30
-
-__target_name:	
-	.asciz	"AE-3068"
-	
-	.section .bootvec,"ax"
-	jmp	@__start
diff --git a/arch/h8300/platform/h8300h/generic/Makefile b/arch/h8300/platform/h8300h/generic/Makefile
deleted file mode 100644
index 2b12a170209e..000000000000
--- a/arch/h8300/platform/h8300h/generic/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-y :=  crt0_$(MODEL).o
diff --git a/arch/h8300/platform/h8300h/generic/crt0_ram.S b/arch/h8300/platform/h8300h/generic/crt0_ram.S
deleted file mode 100644
index 5ab7d9c12910..000000000000
--- a/arch/h8300/platform/h8300h/generic/crt0_ram.S
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- *  linux/arch/h8300/platform/h8300h/generic/crt0_ram.S
- *
- *  Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- *  Platform depend startup
- *  Target Archtecture:	AE-3068 (aka. aki3068net)
- *  Memory Layout     :	RAM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-	
-#if !defined(CONFIG_BLKDEV_RESERVE)
-#if defined(CONFIG_GDB_DEBUG)
-#define RAMEND (__ramend - 0xc000)
-#else
-#define RAMEND __ramend
-#endif
-#else
-#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS
-#endif
-	
-	.global __start
-	.global _command_line
-	.global __platform_gpio_table
-	.global __target_name
-	
-	.h8300h
-
-	.section .text
-	.file	"crt0_ram.S"
-
-	/* CPU Reset entry */
-__start:
-	mov.l	#RAMEND,sp
-	ldc	#0x80,ccr
-
-	/* Peripheral Setup */
-	
-#if defined(CONFIG_BLK_DEV_BLKMEM)
-	/* move romfs image */
-	jsr	@__move_romfs	
-#endif
-	
-	/* .bss clear */
-	mov.l	#__sbss,er5
-	mov.l	#__ebss,er4
-	sub.l	er5,er4
-	shlr	er4
-	shlr	er4
-	sub.l	er0,er0
-1:	
-	mov.l	er0,@er5
-	adds	#4,er5
-	dec.l	#1,er4
-	bne	1b
-
-	/* copy kernel commandline */
-	mov.l	#COMMAND_START,er5
-	mov.l	#_command_line,er6
-	mov.w	#512,r4
-	eepmov.w
-
-	/* uClinux kernel start */
-	ldc	#0x90,ccr	/* running kernel */
-	mov.l	#_init_thread_union,sp
-	add.l	#0x2000,sp
-	jsr	@_start_kernel
-_exit:
-
-	jmp	_exit
-
-	rts
-
-	/* I/O port assign information */
-__platform_gpio_table:	
-	mov.l	#gpio_table,er0
-	rts
-
-gpio_table:
-	;; P1DDR
-	.byte	0x00,0x00
-	;; P2DDR
-	.byte	0x00,0x00
-	;; P3DDR
-	.byte	0x00,0x00
-	;; P4DDR
-	.byte	0x00,0x00
-	;; P5DDR
-	.byte	0x00,0x00
-	;; P6DDR
-	.byte	0x00,0x00
-	;; dummy
-	.byte	0x00,0x00
-	;; P8DDR
-	.byte	0x00,0x00
-	;; P9DDR
-	.byte	0x00,0x00
-	;; PADDR
-	.byte	0x00,0x00
-	;; PBDDR
-	.byte	0x00,0x00
-
-__target_name:	
-	.asciz	"generic"
diff --git a/arch/h8300/platform/h8300h/generic/crt0_rom.S b/arch/h8300/platform/h8300h/generic/crt0_rom.S
deleted file mode 100644
index dda1dfa15a5e..000000000000
--- a/arch/h8300/platform/h8300h/generic/crt0_rom.S
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- *  linux/arch/h8300/platform/h8300h/generic/crt0_rom.S
- *
- *  Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- *  Platform depend startup
- *  Target Archtecture:	generic
- *  Memory Layout     :	ROM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-	
-	.global __start
-	.global __command_line
-	.global __platform_gpio_table
-	.global __target_name
-	
-	.h8300h
-	.section .text
-	.file	"crt0_rom.S"
-
-	/* CPU Reset entry */
-__start:
-	mov.l	#__ramend,sp
-	ldc	#0x80,ccr
-
-	/* Peripheral Setup */
-	
-	/* .bss clear */
-	mov.l	#__sbss,er5
-	mov.l	#__ebss,er4
-	sub.l	er5,er4
-	shlr	er4
-	shlr	er4
-	sub.l	er0,er0
-1:	
-	mov.l	er0,@er5
-	adds	#4,er5
-	dec.l	#1,er4
-	bne	1b
-
-	/* copy .data */
-#if !defined(CONFIG_H8300H_SIM)
-	/* copy .data */
-	mov.l	#__begin_data,er5
-	mov.l	#__sdata,er6
-	mov.l	#__edata,er4
-	sub.l	er6,er4
-	shlr.l	er4
-	shlr.l	er4
-1:	
-	mov.l	@er5+,er0
-	mov.l	er0,@er6
-	adds	#4,er6
-	dec.l	#1,er4
-	bne	1b	
-#endif
-
-	/* copy kernel commandline */
-	mov.l	#COMMAND_START,er5
-	mov.l	#__command_line,er6
-	mov.w	#512,r4
-	eepmov.w
-
-	/* linux kernel start */
-	ldc	#0x90,ccr	/* running kernel */
-	mov.l	#_init_thread_union,sp
-	add.l	#0x2000,sp
-	jsr	@_start_kernel
-_exit:
-
-	jmp	_exit
-
-	rts
-
-	/* I/O port assign information */
-__platform_gpio_table:	
-	mov.l	#gpio_table,er0
-	rts
-
-gpio_table:
-	;; P1DDR
-	.byte	0x00,0x00
-	;; P2DDR
-	.byte	0x00,0x00
-	;; P3DDR
-	.byte	0x00,0x00
-	;; P4DDR
-	.byte	0x00,0x00
-	;; P5DDR
-	.byte	0x00,0x00
-	;; P6DDR
-	.byte	0x00,0x00
-	;; dummy
-	.byte	0x00,0x00
-	;; P8DDR
-	.byte	0x00,0x00
-	;; P9DDR
-	.byte	0x00,0x00
-	;; PADDR
-	.byte	0x00,0x00
-	;; PBDDR
-	.byte	0x00,0x00
-
-	.section .rodata
-__target_name:	
-	.asciz	"generic"
-	
-	.section .bss
-__command_line:	
-	.space	512
-
-	/* interrupt vector */
-	.section .vectors,"ax"
-	.long	__start
-vector	=	1
-	.rept	64-1
-	.long	_interrupt_redirect_table+vector*4
-vector	=	vector + 1
-	.endr
diff --git a/arch/h8300/platform/h8300h/h8max/Makefile b/arch/h8300/platform/h8300h/h8max/Makefile
deleted file mode 100644
index b7ff78050b7f..000000000000
--- a/arch/h8300/platform/h8300h/h8max/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-y := crt0_ram.o
diff --git a/arch/h8300/platform/h8300h/h8max/crt0_ram.S b/arch/h8300/platform/h8300h/h8max/crt0_ram.S
deleted file mode 100644
index 6a0d4e2d9ec6..000000000000
--- a/arch/h8300/platform/h8300h/h8max/crt0_ram.S
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- *  linux/arch/h8300/platform/h8300h/h8max/crt0_ram.S
- *
- *  Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- *  Platform depend startup
- *  Target Archtecture:	H8MAX
- *  Memory Layout     :	RAM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-	
-#if !defined(CONFIG_BLKDEV_RESERVE)
-#if defined(CONFIG_GDB_DEBUG)
-#define RAMEND (__ramend - 0xc000)
-#else
-#define RAMEND __ramend
-#endif
-#else
-#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS
-#endif
-	
-	.global __start
-	.global _command_line
-	.global __platform_gpio_table
-	.global __target_name
-	
-	.h8300h
-
-	.section .text
-	.file	"crt0_ram.S"
-
-	/* CPU Reset entry */
-__start:
-	mov.l	#RAMEND,sp
-	ldc	#0x80,ccr
-
-	/* Peripheral Setup */
-	
-#if defined(CONFIG_MTD_UCLINUX)
-	/* move romfs image */
-	jsr	@__move_romfs	
-#endif
-	
-	/* .bss clear */
-	mov.l	#__sbss,er5
-	mov.l	#__ebss,er4
-	sub.l	er5,er4
-	shlr	er4
-	shlr	er4
-	sub.l	er0,er0
-1:	
-	mov.l	er0,@er5
-	adds	#4,er5
-	dec.l	#1,er4
-	bne	1b
-
-	/* copy kernel commandline */
-	mov.l	#COMMAND_START,er5
-	mov.l	#_command_line,er6
-	mov.w	#512,r4
-	eepmov.w
-
-	/* uClinux kernel start */
-	ldc	#0x90,ccr	/* running kernel */
-	mov.l	#_init_thread_union,sp
-	add.l	#0x2000,sp
-	jsr	@_start_kernel
-_exit:
-
-	jmp	_exit
-
-	rts
-
-	/* I/O port assign information */
-__platform_gpio_table:	
-	mov.l	#gpio_table,er0
-	rts
-
-gpio_table:
-	;; P1DDR
-	.byte	0xff,0xff
-	;; P2DDR
-	.byte	0xff,0xff
-	;; P3DDR
-	.byte	0x00,0x00
-	;; P4DDR
-	.byte	0x00,0x00
-	;; P5DDR
-	.byte	0x01,0x01
-	;; P6DDR
-	.byte	0xf6,0xf6
-	;; dummy
-	.byte	0x00,0x00
-	;; P8DDR
-	.byte	0xee,0xee
-	;; P9DDR
-	.byte	0x00,0x00
-	;; PADDR
-	.byte	0x00,0x00
-	;; PBDDR
-	.byte	0x30,0x30
-
-__target_name:	
-	.asciz	"H8MAX"
-	
-	.section .bootvec,"ax"
-	jmp	@__start
diff --git a/arch/h8300/platform/h8300h/irq.c b/arch/h8300/platform/h8300h/irq.c
deleted file mode 100644
index 0a50353e09d5..000000000000
--- a/arch/h8300/platform/h8300h/irq.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Interrupt handling H8/300H depend.
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-
-#include <asm/ptrace.h>
-#include <asm/traps.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/gpio-internal.h>
-#include <asm/regs306x.h>
-
-const int __initconst h8300_saved_vectors[] = {
-#if defined(CONFIG_GDB_DEBUG)
-	TRAP3_VEC,	/* TRAPA #3 is GDB breakpoint */
-#endif
-	-1,
-};
-
-const h8300_vector __initconst h8300_trap_table[] = {
-	0, 0, 0, 0, 0, 0, 0, 0,
-	system_call,
-	0,
-	0,
-	trace_break,
-};
-
-int h8300_enable_irq_pin(unsigned int irq)
-{
-	int bitmask;
-	if (irq < EXT_IRQ0 || irq > EXT_IRQ5)
-		return 0;
-
-	/* initialize IRQ pin */
-	bitmask = 1 << (irq - EXT_IRQ0);
-	switch(irq) {
-	case EXT_IRQ0:
-	case EXT_IRQ1:
-	case EXT_IRQ2:
-	case EXT_IRQ3:
-		if (H8300_GPIO_RESERVE(H8300_GPIO_P8, bitmask) == 0)
-			return -EBUSY;
-		H8300_GPIO_DDR(H8300_GPIO_P8, bitmask, H8300_GPIO_INPUT);
-		break;
-	case EXT_IRQ4:
-	case EXT_IRQ5:
-		if (H8300_GPIO_RESERVE(H8300_GPIO_P9, bitmask) == 0)
-			return -EBUSY;
-		H8300_GPIO_DDR(H8300_GPIO_P9, bitmask, H8300_GPIO_INPUT);
-		break;
-	}
-
-	return 0;
-}
-
-void h8300_disable_irq_pin(unsigned int irq)
-{
-	int bitmask;
-	if (irq < EXT_IRQ0 || irq > EXT_IRQ5)
-		return;
-
-	/* disable interrupt & release IRQ pin */
-	bitmask = 1 << (irq - EXT_IRQ0);
-	switch(irq) {
-	case EXT_IRQ0:
-	case EXT_IRQ1:
-	case EXT_IRQ2:
-	case EXT_IRQ3:
-		*(volatile unsigned char *)IER &= ~bitmask;
-		H8300_GPIO_FREE(H8300_GPIO_P8, bitmask);
-		break ;
-	case EXT_IRQ4:
-	case EXT_IRQ5:
-		*(volatile unsigned char *)IER &= ~bitmask;
-		H8300_GPIO_FREE(H8300_GPIO_P9, bitmask);
-		break;
-	}
-}
diff --git a/arch/h8300/platform/h8300h/ptrace_h8300h.c b/arch/h8300/platform/h8300h/ptrace_h8300h.c
deleted file mode 100644
index 4f1ed0279633..000000000000
--- a/arch/h8300/platform/h8300h/ptrace_h8300h.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- *  linux/arch/h8300/platform/h8300h/ptrace_h8300h.c
- *    ptrace cpu depend helper functions
- *
- *  Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of
- * this archive for more details.
- */
-
-#include <linux/linkage.h>
-#include <linux/sched.h>
-#include <asm/ptrace.h>
-
-#define CCR_MASK 0x6f    /* mode/imask not set */
-#define BREAKINST 0x5730 /* trapa #3 */
-
-/* Mapping from PT_xxx to the stack offset at which the register is
-   saved.  Notice that usp has no stack-slot and needs to be treated
-   specially (see get_reg/put_reg below). */
-static const int h8300_register_offset[] = {
-	PT_REG(er1), PT_REG(er2), PT_REG(er3), PT_REG(er4),
-	PT_REG(er5), PT_REG(er6), PT_REG(er0), PT_REG(orig_er0),
-	PT_REG(ccr), PT_REG(pc)
-};
-
-/* read register */
-long h8300_get_reg(struct task_struct *task, int regno)
-{
-	switch (regno) {
-	case PT_USP:
-		return task->thread.usp + sizeof(long)*2;
-	case PT_CCR:
-	    return *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]);
-	default:
-	    return *(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]);
-	}
-}
-
-/* write register */
-int h8300_put_reg(struct task_struct *task, int regno, unsigned long data)
-{
-	unsigned short oldccr;
-	switch (regno) {
-	case PT_USP:
-		task->thread.usp = data - sizeof(long)*2;
-	case PT_CCR:
-		oldccr = *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]);
-		oldccr &= ~CCR_MASK;
-		data &= CCR_MASK;
-		data |= oldccr;
-		*(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]) = data;
-		break;
-	default:
-		*(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]) = data;
-		break;
-	}
-	return 0;
-}
-
-/* disable singlestep */
-void user_disable_single_step(struct task_struct *child)
-{
-	if((long)child->thread.breakinfo.addr != -1L) {
-		*child->thread.breakinfo.addr = child->thread.breakinfo.inst;
-		child->thread.breakinfo.addr = (unsigned short *)-1L;
-	}
-}
-
-/* calculate next pc */
-enum jump_type {none,    /* normal instruction */
-		jabs,    /* absolute address jump */
-		ind,     /* indirect address jump */
-		ret,     /* return to subrutine */
-		reg,     /* register indexed jump */
-		relb,    /* pc relative jump (byte offset) */
-		relw,    /* pc relative jump (word offset) */
-               };
-
-/* opcode decode table define
-   ptn: opcode pattern
-   msk: opcode bitmask
-   len: instruction length (<0 next table index)
-   jmp: jump operation mode */
-struct optable {
-	unsigned char bitpattern;
-	unsigned char bitmask;
-	signed char length;
-	signed char type;
-} __attribute__((aligned(1),packed));
-
-#define OPTABLE(ptn,msk,len,jmp)   \
-        {                          \
-		.bitpattern = ptn, \
-		.bitmask    = msk, \
-		.length	    = len, \
-		.type       = jmp, \
-	}
-
-static const struct optable optable_0[] = {
-	OPTABLE(0x00,0xff, 1,none), /* 0x00 */
-	OPTABLE(0x01,0xff,-1,none), /* 0x01 */
-	OPTABLE(0x02,0xfe, 1,none), /* 0x02-0x03 */
-	OPTABLE(0x04,0xee, 1,none), /* 0x04-0x05/0x14-0x15 */
-	OPTABLE(0x06,0xfe, 1,none), /* 0x06-0x07 */
-	OPTABLE(0x08,0xea, 1,none), /* 0x08-0x09/0x0c-0x0d/0x18-0x19/0x1c-0x1d */
-	OPTABLE(0x0a,0xee, 1,none), /* 0x0a-0x0b/0x1a-0x1b */
-	OPTABLE(0x0e,0xee, 1,none), /* 0x0e-0x0f/0x1e-0x1f */
-	OPTABLE(0x10,0xfc, 1,none), /* 0x10-0x13 */
-	OPTABLE(0x16,0xfe, 1,none), /* 0x16-0x17 */
-	OPTABLE(0x20,0xe0, 1,none), /* 0x20-0x3f */
-	OPTABLE(0x40,0xf0, 1,relb), /* 0x40-0x4f */
-	OPTABLE(0x50,0xfc, 1,none), /* 0x50-0x53 */
-	OPTABLE(0x54,0xfd, 1,ret ), /* 0x54/0x56 */
-	OPTABLE(0x55,0xff, 1,relb), /* 0x55 */
-	OPTABLE(0x57,0xff, 1,none), /* 0x57 */
-	OPTABLE(0x58,0xfb, 2,relw), /* 0x58/0x5c */
-	OPTABLE(0x59,0xfb, 1,reg ), /* 0x59/0x5b */
-	OPTABLE(0x5a,0xfb, 2,jabs), /* 0x5a/0x5e */
-	OPTABLE(0x5b,0xfb, 2,ind ), /* 0x5b/0x5f */
-	OPTABLE(0x60,0xe8, 1,none), /* 0x60-0x67/0x70-0x77 */
-	OPTABLE(0x68,0xfa, 1,none), /* 0x68-0x69/0x6c-0x6d */
-	OPTABLE(0x6a,0xfe,-2,none), /* 0x6a-0x6b */
-	OPTABLE(0x6e,0xfe, 2,none), /* 0x6e-0x6f */
-	OPTABLE(0x78,0xff, 4,none), /* 0x78 */
-	OPTABLE(0x79,0xff, 2,none), /* 0x79 */
-	OPTABLE(0x7a,0xff, 3,none), /* 0x7a */
-	OPTABLE(0x7b,0xff, 2,none), /* 0x7b */
-	OPTABLE(0x7c,0xfc, 2,none), /* 0x7c-0x7f */
-	OPTABLE(0x80,0x80, 1,none), /* 0x80-0xff */
-};
-
-static const struct optable optable_1[] = {
-	OPTABLE(0x00,0xff,-3,none), /* 0x0100 */
-	OPTABLE(0x40,0xf0,-3,none), /* 0x0140-0x14f */
-	OPTABLE(0x80,0xf0, 1,none), /* 0x0180-0x018f */
-	OPTABLE(0xc0,0xc0, 2,none), /* 0x01c0-0x01ff */
-};
-
-static const struct optable optable_2[] = {
-	OPTABLE(0x00,0x20, 2,none), /* 0x6a0?/0x6a8?/0x6b0?/0x6b8? */
-	OPTABLE(0x20,0x20, 3,none), /* 0x6a2?/0x6aa?/0x6b2?/0x6ba? */
-};
-
-static const struct optable optable_3[] = {
-	OPTABLE(0x69,0xfb, 2,none), /* 0x010069/0x01006d/014069/0x01406d */
-	OPTABLE(0x6b,0xff,-4,none), /* 0x01006b/0x01406b */
-	OPTABLE(0x6f,0xff, 3,none), /* 0x01006f/0x01406f */
-	OPTABLE(0x78,0xff, 5,none), /* 0x010078/0x014078 */
-};
-
-static const struct optable optable_4[] = {
-	OPTABLE(0x00,0x78, 3,none), /* 0x0100690?/0x01006d0?/0140690/0x01406d0?/0x0100698?/0x01006d8?/0140698?/0x01406d8? */
-	OPTABLE(0x20,0x78, 4,none), /* 0x0100692?/0x01006d2?/0140692/0x01406d2?/0x010069a?/0x01006da?/014069a?/0x01406da? */
-};
-
-static const struct optables_list {
-	const struct optable *ptr;
-	int size;
-} optables[] = {
-#define OPTABLES(no)                                                   \
-        {                                                              \
-		.ptr  = optable_##no,                                  \
-		.size = sizeof(optable_##no) / sizeof(struct optable), \
-	}
-	OPTABLES(0),
-	OPTABLES(1),
-	OPTABLES(2),
-	OPTABLES(3),
-	OPTABLES(4),
-
-};
-
-const unsigned char condmask[] = {
-	0x00,0x40,0x01,0x04,0x02,0x08,0x10,0x20
-};
-
-static int isbranch(struct task_struct *task,int reson)
-{
-	unsigned char cond = h8300_get_reg(task, PT_CCR);
-	/* encode complex conditions */
-	/* B4: N^V
-	   B5: Z|(N^V)
-	   B6: C|Z */
-	__asm__("bld #3,%w0\n\t"
-		"bxor #1,%w0\n\t"
-		"bst #4,%w0\n\t"
-		"bor #2,%w0\n\t"
-		"bst #5,%w0\n\t"
-		"bld #2,%w0\n\t"
-		"bor #0,%w0\n\t"
-		"bst #6,%w0\n\t"
-		:"=&r"(cond)::"cc");
-	cond &= condmask[reson >> 1];
-	if (!(reson & 1))
-		return cond == 0;
-	else
-		return cond != 0;
-}
-
-static unsigned short *getnextpc(struct task_struct *child, unsigned short *pc)
-{
-	const struct optable *op;
-	unsigned char *fetch_p;
-	unsigned char inst;
-	unsigned long addr;
-	unsigned long *sp;
-	int op_len,regno;
-	op = optables[0].ptr;
-	op_len = optables[0].size;
-	fetch_p = (unsigned char *)pc;
-	inst = *fetch_p++;
-	do {
-		if ((inst & op->bitmask) == op->bitpattern) {
-			if (op->length < 0) {
-				op = optables[-op->length].ptr;
-				op_len = optables[-op->length].size + 1;
-				inst = *fetch_p++;
-			} else {
-				switch (op->type) {
-				case none:
-					return pc + op->length;
-				case jabs:
-					addr = *(unsigned long *)pc;
-					return (unsigned short *)(addr & 0x00ffffff);
-				case ind:
-					addr = *pc & 0xff;
-					return (unsigned short *)(*(unsigned long *)addr);
-				case ret:
-					sp = (unsigned long *)h8300_get_reg(child, PT_USP);
-					/* user stack frames
-					   |   er0  | temporary saved
-					   +--------+
-					   |   exp  | exception stack frames
-					   +--------+
-					   | ret pc | userspace return address
-					*/
-					return (unsigned short *)(*(sp+2) & 0x00ffffff);
-				case reg:
-					regno = (*pc >> 4) & 0x07;
-					if (regno == 0)
-						addr = h8300_get_reg(child, PT_ER0);
-					else
-						addr = h8300_get_reg(child, regno-1+PT_ER1);
-					return (unsigned short *)addr;
-				case relb:
-					if (inst == 0x55 || isbranch(child,inst & 0x0f))
-						pc = (unsigned short *)((unsigned long)pc +
-								       ((signed char)(*fetch_p)));
-					return pc+1; /* skip myself */
-				case relw:
-					if (inst == 0x5c || isbranch(child,(*fetch_p & 0xf0) >> 4))
-						pc = (unsigned short *)((unsigned long)pc +
-								       ((signed short)(*(pc+1))));
-					return pc+2; /* skip myself */
-				}
-			}
-		} else
-			op++;
-	} while(--op_len > 0);
-	return NULL;
-}
-
-/* Set breakpoint(s) to simulate a single step from the current PC.  */
-
-void user_enable_single_step(struct task_struct *child)
-{
-	unsigned short *nextpc;
-	nextpc = getnextpc(child,(unsigned short *)h8300_get_reg(child, PT_PC));
-	child->thread.breakinfo.addr = nextpc;
-	child->thread.breakinfo.inst = *nextpc;
-	*nextpc = BREAKINST;
-}
-
-asmlinkage void trace_trap(unsigned long bp)
-{
-	if ((unsigned long)current->thread.breakinfo.addr == bp) {
-		user_disable_single_step(current);
-		force_sig(SIGTRAP,current);
-	} else
-	        force_sig(SIGILL,current);
-}
-
diff --git a/arch/h8300/platform/h8s/Makefile b/arch/h8300/platform/h8s/Makefile
deleted file mode 100644
index bf1241883766..000000000000
--- a/arch/h8300/platform/h8s/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-# Reuse any files we can from the H8S
-#
-
-obj-y := ints_h8s.o ptrace_h8s.o
diff --git a/arch/h8300/platform/h8s/edosk2674/Makefile b/arch/h8300/platform/h8s/edosk2674/Makefile
deleted file mode 100644
index 8e349723bb4f..000000000000
--- a/arch/h8300/platform/h8s/edosk2674/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-y := crt0_$(MODEL).o
diff --git a/arch/h8300/platform/h8s/edosk2674/crt0_ram.S b/arch/h8300/platform/h8s/edosk2674/crt0_ram.S
deleted file mode 100644
index 5ed191b37cde..000000000000
--- a/arch/h8300/platform/h8s/edosk2674/crt0_ram.S
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- *  linux/arch/h8300/platform/h8s/edosk2674/crt0_ram.S
- *
- *  Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- *  Platform depend startup
- *  Target Archtecture:	EDOSK-2674
- *  Memory Layout     :	RAM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-#include <asm/regs267x.h>
-			
-#if !defined(CONFIG_BLKDEV_RESERVE)
-#if defined(CONFIG_GDB_DEBUG)
-#define RAMEND (__ramend - 0xc000)
-#else
-#define RAMEND __ramend
-#endif
-#else
-#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS
-#endif
-	
-	.global __start
-	.global __command_line
-	.global __platform_gpio_table
-	.global __target_name
-	
-	.h8300s
-
-	.section .text
-	.file	"crt0_ram.S"
-
-	/* CPU Reset entry */
-__start:
-	mov.l	#RAMEND,sp
-	ldc	#0x80,ccr
-	ldc	#0x00,exr
-
-	/* Peripheral Setup */
-	bclr	#4,@INTCR:8	/* interrupt mode 2 */
-	bset	#5,@INTCR:8
-	bclr	#0,@IER+1:16
-	bset	#1,@ISCRL+1:16	/* IRQ0 Positive Edge */
-	bclr	#0,@ISCRL+1:16
-
-#if defined(CONFIG_MTD_UCLINUX)
-	/* move romfs image */
-	jsr	@__move_romfs	
-#endif
-	
-	/* .bss clear */
-	mov.l	#__sbss,er5
-	mov.l	er5,er6
-	mov.l	#__ebss,er4
-	sub.l	er5,er4
-	shlr	#2,er4
-	sub.l	er0,er0
-1:	
-	mov.l	er0,@er5
-	adds	#4,er5
-	dec.l	#1,er4
-	bne	1b
-
-	/* copy kernel commandline */
-	mov.l	#COMMAND_START,er5
-	mov.l	#_command_line,er6
-	mov.w	#512,r4
-	eepmov.w
-
-	/* uClinux kernel start */
-	ldc	#0x90,ccr	/* running kernel */
-	mov.l	#_init_thread_union,sp
-	add.l	#0x2000,sp
-	jsr	@_start_kernel
-_exit:
-
-	jmp	_exit
-
-	rts
-
-	/* I/O port assign information */
-__platform_gpio_table:	
-	mov.l	#gpio_table,er0
-	rts
-
-gpio_table:
-	;; P1DDR
-	;;      used,ddr
-	.byte	0x00,0x00
-	;; P2DDR
-	.byte	0x00,0x00
-	;; P3DDR
-	.byte	0x3f,0x3a
-	;; dummy
-	.byte	0x00,0x00
-	;; P5DDR
-	.byte	0x00,0x00
-	;; P6DDR
-	.byte	0x00,0x00
-	;; P7DDR
-	.byte	0x00,0x00
-	;; P8DDR
-	.byte	0x00,0x00
-	;; dummy
-	.byte	0x00,0x00
-	;; PADDR
-	.byte	0xff,0xff
-	;; PBDDR
-	.byte	0xff,0x00
-	;; PCDDR
-	.byte	0xff,0x00
-	;; PDDDR
-	.byte	0xff,0x00
-	;; PEDDR
-	.byte	0xff,0x00
-	;; PFDDR
-	.byte	0xff,0xff
-	;; PGDDR
-	.byte	0x0f,0x0f
-	;; PHDDR
-	.byte	0x0f,0x0f
-
-__target_name:	
-	.asciz	"EDOSK-2674"
-	
-	.section .bootvec,"ax"
-	jmp	@__start
diff --git a/arch/h8300/platform/h8s/edosk2674/crt0_rom.S b/arch/h8300/platform/h8s/edosk2674/crt0_rom.S
deleted file mode 100644
index 06d1d7f324ca..000000000000
--- a/arch/h8300/platform/h8s/edosk2674/crt0_rom.S
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- *  linux/arch/h8300/platform/h8s/edosk2674/crt0_rom.S
- *
- *  Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- *  Platform depend startup
- *  Target Archtecture:	EDOSK-2674
- *  Memory Layout     :	ROM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-#include <asm/regs267x.h>
-		
-	.global __start
-	.global __command_line
-	.global __platform_gpio_table
-	.global __target_name
-	
-	.h8300s
-	.section .text
-	.file	"crt0_rom.S"
-
-	/* CPU Reset entry */
-__start:
-	mov.l	#__ramend,sp
-	ldc	#0x80,ccr
-	ldc	#0,exr
-	
-	/* Peripheral Setup */
-;BSC/GPIO setup
-	mov.l	#init_regs,er0
-	mov.w	#0xffff,e2
-1:
-	mov.w	@er0+,r2
-	beq	2f
-	mov.w	@er0+,r1
-	mov.b	r1l,@er2
-	bra	1b
-
-2:
-;SDRAM setup
-#define SDRAM_SMR 0x400040
-
-	mov.b	#0,r0l
-	mov.b	r0l,@DRACCR:16
-	mov.w	#0x188,r0
-	mov.w	r0,@REFCR:16
-	mov.w	#0x85b4,r0
-	mov.w	r0,@DRAMCR:16
-	mov.b	#0,r1l
-	mov.b	r1l,@SDRAM_SMR
-	mov.w	#0x84b4,r0
-	mov.w	r0,@DRAMCR:16
-;special thanks to Arizona Cooperative Power
-	
-	/* copy .data */
-	mov.l	#__begin_data,er5
-	mov.l	#__sdata,er6
-	mov.l	#__edata,er4
-	sub.l	er6,er4
-	shlr.l	#2,er4
-1:	
-	mov.l	@er5+,er0
-	mov.l	er0,@er6
-	adds	#4,er6
-	dec.l	#1,er4
-	bne	1b	
-
-	/* .bss clear */
-	mov.l	#__sbss,er5
-	mov.l	#__ebss,er4
-	sub.l	er5,er4
-	shlr.l	#2,er4		
-	sub.l	er0,er0
-1:
-	mov.l	er0,@er5
-	adds	#4,er5
-	dec.l	#1,er4
-	bne	1b
-
-	/* copy kernel commandline */
-	mov.l	#COMMAND_START,er5
-	mov.l	#__command_line,er6
-	mov.w	#512,r4
-	eepmov.w
-
-	/* linux kernel start */
-	ldc	#0x90,ccr	/* running kernel */
-	mov.l	#_init_thread_union,sp
-	add.l	#0x2000,sp
-	jsr	@_start_kernel
-_exit:
-
-	jmp	_exit
-
-	rts
-
-	/* I/O port assign information */
-__platform_gpio_table:	
-	mov.l	#gpio_table,er0
-	rts
-
-#define INIT_REGS_DATA(REGS,DATA) \
-	.word	((REGS) & 0xffff),DATA
-
-init_regs:
-INIT_REGS_DATA(ASTCR,0xff)
-INIT_REGS_DATA(RDNCR,0x00)
-INIT_REGS_DATA(ABWCR,0x80)
-INIT_REGS_DATA(WTCRAH,0x27)
-INIT_REGS_DATA(WTCRAL,0x77)
-INIT_REGS_DATA(WTCRBH,0x71)
-INIT_REGS_DATA(WTCRBL,0x22)
-INIT_REGS_DATA(CSACRH,0x80)
-INIT_REGS_DATA(CSACRL,0x80)
-INIT_REGS_DATA(BROMCRH,0xa0)
-INIT_REGS_DATA(BROMCRL,0xa0)
-INIT_REGS_DATA(P3DDR,0x3a)
-INIT_REGS_DATA(P3ODR,0x06)
-INIT_REGS_DATA(PADDR,0xff)
-INIT_REGS_DATA(PFDDR,0xfe)
-INIT_REGS_DATA(PGDDR,0x0f)
-INIT_REGS_DATA(PHDDR,0x0f)
-INIT_REGS_DATA(PFCR0,0xff)
-INIT_REGS_DATA(PFCR2,0x0d)
-INIT_REGS_DATA(ITSR, 0x00)
-INIT_REGS_DATA(ITSR+1,0x3f)
-INIT_REGS_DATA(INTCR,0x20)
-		
-	.word	0
-
-gpio_table:
-	;; P1DDR
-	.byte	0x00,0x00
-	;; P2DDR
-	.byte	0x00,0x00
-	;; P3DDR
-	.byte	0x00,0x00
-	;; dummy
-	.byte	0x00,0x00
-	;; P5DDR
-	.byte	0x00,0x00
-	;; P6DDR
-	.byte	0x00,0x00
-	;; P7DDR
-	.byte	0x00,0x00
-	;; P8DDR
-	.byte	0x00,0x00
-	;; dummy
-	.byte	0x00,0x00
-	;; PADDR
-	.byte	0x00,0x00
-	;; PBDDR
-	.byte	0x00,0x00
-	;; PCDDR
-	.byte	0x00,0x00
-	;; PDDDR
-	.byte	0x00,0x00
-	;; PEDDR
-	.byte	0x00,0x00
-	;; PFDDR
-	.byte	0x00,0x00
-	;; PGDDR
-	.byte	0x00,0x00
-	;; PHDDR
-	.byte	0x00,0x00
-
-	.section .rodata
-__target_name:	
-	.asciz	"EDOSK-2674"
-	
-	.section .bss
-__command_line:	
-	.space	512
-
-	/* interrupt vector */
-	.section .vectors,"ax"
-	.long	__start
-	.long	__start
-vector	=	2
-	.rept	126
-	.long	_interrupt_redirect_table+vector*4
-vector	=	vector + 1
-	.endr
diff --git a/arch/h8300/platform/h8s/generic/Makefile b/arch/h8300/platform/h8s/generic/Makefile
deleted file mode 100644
index 44b4685c664c..000000000000
--- a/arch/h8300/platform/h8s/generic/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-y =  crt0_$(MODEL).o
diff --git a/arch/h8300/platform/h8s/generic/crt0_ram.S b/arch/h8300/platform/h8s/generic/crt0_ram.S
deleted file mode 100644
index 7018915de74f..000000000000
--- a/arch/h8300/platform/h8s/generic/crt0_ram.S
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- *  linux/arch/h8300/platform/h8s/edosk2674/crt0_ram.S
- *
- *  Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- *  Platform depend startup
- *  Target Archtecture:	generic
- *  Memory Layout     :	RAM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-#include <asm/regs267x.h>
-			
-#if !defined(CONFIG_BLKDEV_RESERVE)
-#if defined(CONFIG_GDB_DEBUG)
-#define RAMEND (__ramend - 0xc000)
-#else
-#define RAMEND __ramend
-#endif
-#else
-#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS
-#endif
-	
-	.global __start
-	.global __command_line
-	.global __platform_gpio_table
-	.global __target_name
-	
-	.h8300s
-
-	.section .text
-	.file	"crt0_ram.S"
-
-	/* CPU Reset entry */
-__start:
-	mov.l	#RAMEND,sp
-	ldc	#0x80,ccr
-	ldc	#0x00,exr
-
-	/* Peripheral Setup */
-	bclr	#4,@INTCR:8	/* interrupt mode 2 */
-	bset	#5,@INTCR:8
-
-#if defined(CONFIG_MTD_UCLINUX)
-	/* move romfs image */
-	jsr	@__move_romfs	
-#endif
-	
-	/* .bss clear */
-	mov.l	#__sbss,er5
-	mov.l	er5,er6
-	mov.l	#__ebss,er4
-	sub.l	er5,er4
-	shlr	#2,er4
-	sub.l	er0,er0
-1:	
-	mov.l	er0,@er5
-	adds	#4,er5
-	dec.l	#1,er4
-	bne	1b
-
-	/* copy kernel commandline */
-	mov.l	#COMMAND_START,er5
-	mov.l	#_command_line,er6
-	mov.w	#512,r4
-	eepmov.w
-
-	/* uClinux kernel start */
-	ldc	#0x90,ccr	/* running kernel */
-	mov.l	#_init_thread_union,sp
-	add.l	#0x2000,sp
-	jsr	@_start_kernel
-_exit:
-
-	jmp	_exit
-
-	rts
-
-	/* I/O port assign information */
-__platform_gpio_table:	
-	mov.l	#gpio_table,er0
-	rts
-
-gpio_table:
-	;; P1DDR
-	;;      used,ddr
-	.byte	0x00,0x00
-	;; P2DDR
-	.byte	0x00,0x00
-	;; P3DDR
-	.byte	0x00,0x00
-	;; dummy
-	.byte	0x00,0x00
-	;; P5DDR
-	.byte	0x00,0x00
-	;; P6DDR
-	.byte	0x00,0x00
-	;; P7DDR
-	.byte	0x00,0x00
-	;; P8DDR
-	.byte	0x00,0x00
-	;; dummy
-	.byte	0x00,0x00
-	;; PADDR
-	.byte	0x00,0x00
-	;; PBDDR
-	.byte	0x00,0x00
-	;; PCDDR
-	.byte	0x00,0x00
-	;; PDDDR
-	.byte	0x00,0x00
-	;; PEDDR
-	.byte	0x00,0x00
-	;; PFDDR
-	.byte	0x00,0x00
-	;; PGDDR
-	.byte	0x00,0x00
-	;; PHDDR
-	.byte	0x00,0x00
-
-__target_name:	
-	.asciz	"generic"
-	
-	.section .bootvec,"ax"
-	jmp	@__start
diff --git a/arch/h8300/platform/h8s/generic/crt0_rom.S b/arch/h8300/platform/h8s/generic/crt0_rom.S
deleted file mode 100644
index 623ba7828193..000000000000
--- a/arch/h8300/platform/h8s/generic/crt0_rom.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- *  linux/arch/h8300/platform/h8s/generic/crt0_rom.S
- *
- *  Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- *  Platform depend startup 
- *  Target Archtecture:	generic
- *  Memory Layout     :	ROM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-#include <asm/regs267x.h>
-	
-	.global __start
-	.global __command_line
-	.global __platform_gpio_table
-	.global __target_name
-	
-	.h8300s
-	.section .text
-	.file	"crt0_rom.S"
-
-	/* CPU Reset entry */
-__start:
-	mov.l	#__ramend,sp
-	ldc	#0x80,ccr
-	ldc	#0,exr
-	bclr	#4,@INTCR:8
-	bset	#5,@INTCR:8	/* Interrupt mode 2 */
-	
-	/* Peripheral Setup */
-	
-	/* copy .data */
-#if !defined(CONFIG_H8S_SIM)
-	mov.l	#__begin_data,er5
-	mov.l	#__sdata,er6
-	mov.l	#__edata,er4
-	sub.l	er6,er4
-	shlr.l	#2,er4
-1:	
-	mov.l	@er5+,er0
-	mov.l	er0,@er6
-	adds	#4,er6
-	dec.l	#1,er4
-	bne	1b	
-#endif
-
-	/* .bss clear */
-	mov.l	#__sbss,er5
-	mov.l	#__ebss,er4
-	sub.l	er5,er4
-	shlr.l	#2,er4		
-	sub.l	er0,er0
-1:
-	mov.l	er0,@er5
-	adds	#4,er5
-	dec.l	#1,er4
-	bne	1b
-
-	/* linux kernel start */
-	ldc	#0x90,ccr	/* running kernel */
-	mov.l	#_init_thread_union,sp
-	add.l	#0x2000,sp
-	jsr	@_start_kernel
-_exit:
-
-	jmp	_exit
-
-	rts
-
-	/* I/O port assign information */
-__platform_gpio_table:	
-	mov.l	#gpio_table,er0
-	rts
-
-gpio_table:
-	;; P1DDR
-	.byte	0x00,0x00
-	;; P2DDR
-	.byte	0x00,0x00
-	;; P3DDR
-	.byte	0x00,0x00
-	;; P4DDR
-	.byte	0x00,0x00
-	;; P5DDR
-	.byte	0x00,0x00
-	;; P6DDR
-	.byte	0x00,0x00
-	;; dummy
-	.byte	0x00,0x00
-	;; P8DDR
-	.byte	0x00,0x00
-	;; PADDR
-	.byte	0x00,0x00
-	;; PBDDR
-	.byte	0x00,0x00
-	;; PCDDR
-	.byte	0x00,0x00
-	;; PDDDR
-	.byte	0x00,0x00
-	;; PEDDR
-	.byte	0x00,0x00
-	;; PFDDR
-	.byte	0x00,0x00
-	;; PGDDR
-	.byte	0x00,0x00
-	;; PHDDR
-	.byte	0x00,0x00
-
-	.section .rodata
-__target_name:	
-	.asciz	"generic"
-	
-	.section .bss
-__command_line:	
-	.space	512
-
-	/* interrupt vector */
-	.section .vectors,"ax"
-	.long	__start
-	.long	__start
-vector	=	2
-	.rept	126-1
-	.long	_interrupt_redirect_table+vector*4
-vector	=	vector + 1
-	.endr
diff --git a/arch/h8300/platform/h8s/irq.c b/arch/h8300/platform/h8s/irq.c
deleted file mode 100644
index f3a5511c16b1..000000000000
--- a/arch/h8300/platform/h8s/irq.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * linux/arch/h8300/platform/h8s/ints_h8s.c
- * Interrupt handling CPU variants
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-
-#include <asm/ptrace.h>
-#include <asm/traps.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/gpio-internal.h>
-#include <asm/regs267x.h>
-
-/* saved vector list */
-const int __initconst h8300_saved_vectors[] = {
-#if defined(CONFIG_GDB_DEBUG)
-	TRACE_VEC,
-	TRAP3_VEC,
-#endif
-	-1
-};
-
-/* trap entry table */
-const H8300_VECTOR __initconst h8300_trap_table[] = {
-	0,0,0,0,0,
-	trace_break,  /* TRACE */
-	0,0,
-	system_call,  /* TRAPA #0 */
-	0,0,0,0,0,0,0
-};
-
-/* IRQ pin assignment */
-struct irq_pins {
-	unsigned char port_no;
-	unsigned char bit_no;
-} __attribute__((aligned(1),packed));
-/* ISTR = 0 */
-static const struct irq_pins irq_assign_table0[16]={
-        {H8300_GPIO_P5,H8300_GPIO_B0},{H8300_GPIO_P5,H8300_GPIO_B1},
-	{H8300_GPIO_P5,H8300_GPIO_B2},{H8300_GPIO_P5,H8300_GPIO_B3},
-	{H8300_GPIO_P5,H8300_GPIO_B4},{H8300_GPIO_P5,H8300_GPIO_B5},
-	{H8300_GPIO_P5,H8300_GPIO_B6},{H8300_GPIO_P5,H8300_GPIO_B7},
-	{H8300_GPIO_P6,H8300_GPIO_B0},{H8300_GPIO_P6,H8300_GPIO_B1},
-	{H8300_GPIO_P6,H8300_GPIO_B2},{H8300_GPIO_P6,H8300_GPIO_B3},
-	{H8300_GPIO_P6,H8300_GPIO_B4},{H8300_GPIO_P6,H8300_GPIO_B5},
-	{H8300_GPIO_PF,H8300_GPIO_B1},{H8300_GPIO_PF,H8300_GPIO_B2},
-};
-/* ISTR = 1 */
-static const struct irq_pins irq_assign_table1[16]={
-	{H8300_GPIO_P8,H8300_GPIO_B0},{H8300_GPIO_P8,H8300_GPIO_B1},
-	{H8300_GPIO_P8,H8300_GPIO_B2},{H8300_GPIO_P8,H8300_GPIO_B3},
-	{H8300_GPIO_P8,H8300_GPIO_B4},{H8300_GPIO_P8,H8300_GPIO_B5},
-	{H8300_GPIO_PH,H8300_GPIO_B2},{H8300_GPIO_PH,H8300_GPIO_B3},
-	{H8300_GPIO_P2,H8300_GPIO_B0},{H8300_GPIO_P2,H8300_GPIO_B1},
-	{H8300_GPIO_P2,H8300_GPIO_B2},{H8300_GPIO_P2,H8300_GPIO_B3},
-	{H8300_GPIO_P2,H8300_GPIO_B4},{H8300_GPIO_P2,H8300_GPIO_B5},
-	{H8300_GPIO_P2,H8300_GPIO_B6},{H8300_GPIO_P2,H8300_GPIO_B7},
-};
-
-/* IRQ to GPIO pin translation */
-#define IRQ_GPIO_MAP(irqbit,irq,port,bit)			  \
-do {								  \
-	if (*(volatile unsigned short *)ITSR & irqbit) {	  \
-		port = irq_assign_table1[irq - EXT_IRQ0].port_no; \
-		bit  = irq_assign_table1[irq - EXT_IRQ0].bit_no;  \
-	} else {						  \
-		port = irq_assign_table0[irq - EXT_IRQ0].port_no; \
-		bit  = irq_assign_table0[irq - EXT_IRQ0].bit_no;  \
-	}							  \
-} while(0)
-
-int h8300_enable_irq_pin(unsigned int irq)
-{
-	if (irq >= EXT_IRQ0 && irq <= EXT_IRQ15) {
-		unsigned short ptn = 1 << (irq - EXT_IRQ0);
-		unsigned int port_no,bit_no;
-		IRQ_GPIO_MAP(ptn, irq, port_no, bit_no);
-		if (H8300_GPIO_RESERVE(port_no, bit_no) == 0)
-			return -EBUSY;                   /* pin already use */
-		H8300_GPIO_DDR(port_no, bit_no, H8300_GPIO_INPUT);
-		*(volatile unsigned short *)ISR &= ~ptn; /* ISR clear */
-	}
-
-	return 0;
-}
-
-void h8300_disable_irq_pin(unsigned int irq)
-{
-	if (irq >= EXT_IRQ0 && irq <= EXT_IRQ15) {
-		/* disable interrupt & release IRQ pin */
-		unsigned short ptn = 1 << (irq - EXT_IRQ0);
-		unsigned short port_no,bit_no;
-		*(volatile unsigned short *)ISR &= ~ptn;
-		*(volatile unsigned short *)IER &= ~ptn;
-		IRQ_GPIO_MAP(ptn, irq, port_no, bit_no);
-		H8300_GPIO_FREE(port_no, bit_no);
-	}
-}
diff --git a/arch/h8300/platform/h8s/ptrace_h8s.c b/arch/h8300/platform/h8s/ptrace_h8s.c
deleted file mode 100644
index c058ab1a8495..000000000000
--- a/arch/h8300/platform/h8s/ptrace_h8s.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- *  linux/arch/h8300/platform/h8s/ptrace_h8s.c
- *    ptrace cpu depend helper functions
- *
- *  Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of
- * this archive for more details.
- */
-
-#include <linux/linkage.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-
-#define CCR_MASK  0x6f
-#define EXR_TRACE 0x80
-
-/* Mapping from PT_xxx to the stack offset at which the register is
-   saved.  Notice that usp has no stack-slot and needs to be treated
-   specially (see get_reg/put_reg below). */
-static const int h8300_register_offset[] = {
-	PT_REG(er1), PT_REG(er2), PT_REG(er3), PT_REG(er4),
-	PT_REG(er5), PT_REG(er6), PT_REG(er0), PT_REG(orig_er0),
-	PT_REG(ccr), PT_REG(pc),  0,           PT_REG(exr)
-};
-
-/* read register */
-long h8300_get_reg(struct task_struct *task, int regno)
-{
-	switch (regno) {
-	case PT_USP:
-		return task->thread.usp + sizeof(long)*2 + 2;
-	case PT_CCR:
-	case PT_EXR:
-	    return *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]);
-	default:
-	    return *(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]);
-	}
-}
-
-/* write register */
-int h8300_put_reg(struct task_struct *task, int regno, unsigned long data)
-{
-	unsigned short oldccr;
-	switch (regno) {
-	case PT_USP:
-		task->thread.usp = data - sizeof(long)*2 - 2;
-	case PT_CCR:
-		oldccr = *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]);
-		oldccr &= ~CCR_MASK;
-		data &= CCR_MASK;
-		data |= oldccr;
-		*(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]) = data;
-		break;
-	case PT_EXR:
-		/* exr modify not support */
-		return -EIO;
-	default:
-		*(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]) = data;
-		break;
-	}
-	return 0;
-}
-
-/* disable singlestep */
-void user_disable_single_step(struct task_struct *child)
-{
-	*(unsigned short *)(child->thread.esp0 + h8300_register_offset[PT_EXR]) &= ~EXR_TRACE;
-}
-
-/* enable singlestep */
-void user_enable_single_step(struct task_struct *child)
-{
-	*(unsigned short *)(child->thread.esp0 + h8300_register_offset[PT_EXR]) |= EXR_TRACE;
-}
-
-asmlinkage void trace_trap(unsigned long bp)
-{
-	(void)bp;
-	force_sig(SIGTRAP,current);
-}
-
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index d34049712a4d..50fe651da965 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -5,7 +5,7 @@
 #include <linux/sh_dma.h>
 
 /*
- * Generic header for SuperH (H)SCI(F) (used by sh/sh64/h8300 and related parts)
+ * Generic header for SuperH (H)SCI(F) (used by sh/sh64 and related parts)
  */
 
 #define SCIx_NOT_SUPPORTED	(-1)
diff --git a/tools/testing/ktest/examples/crosstests.conf b/tools/testing/ktest/examples/crosstests.conf
index 46736604c26c..a1203148dfa1 100644
--- a/tools/testing/ktest/examples/crosstests.conf
+++ b/tools/testing/ktest/examples/crosstests.conf
@@ -133,12 +133,6 @@ CROSS = frv-linux
 ARCH = frv
 GCC_VER = 4.5.1
 
-# h8300 - failed make defconfig??
-TEST_START IF ${RUN} == h8300 || ${DO_FAILED}
-CROSS = h8300-elf
-ARCH = h8300
-GCC_VER = 4.5.1
-
 # m68k fails with error?
 TEST_START IF ${RUN} == m68k || ${DO_DEFAULT}
 CROSS = m68k-linux
-- 
cgit v1.2.3


From ffb7fc0f6d2d630cb9e6e37e67993aaa342819f1 Mon Sep 17 00:00:00 2001
From: Sonic Zhang
Date: Tue, 3 Sep 2013 16:29:00 +0800
Subject: blackfin: gpio: Remove none gpio lib code.

- Remove non gpio lib code from blackfin architecture.
- Limit the lagecy blackfin gpio driver to bf5xx processors only.
- Remove unused definition of the pint power functions.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/blackfin/Kconfig            |   7 ++
 arch/blackfin/include/asm/gpio.h | 157 +++++----------------------------------
 arch/blackfin/kernel/Makefile    |   3 +-
 3 files changed, 29 insertions(+), 138 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index f78c9a2c7e28..a1199b2e9d2b 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -52,6 +52,9 @@ config GENERIC_BUG
 config ZONE_DMA
 	def_bool y
 
+config GENERIC_GPIO
+	def_bool y
+
 config FORCE_MAX_ZONEORDER
 	int
 	default "14"
@@ -317,6 +320,10 @@ config BF53x
 	depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
 	default y
 
+config GPIO_ADI
+	def_bool y
+	depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561)
+
 config MEM_MT48LC64M4A2FB_7E
 	bool
 	depends on (BFIN533_STAMP)
diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
index 98d0133346b5..99d338ca2ea4 100644
--- a/arch/blackfin/include/asm/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -25,8 +25,12 @@
 
 #ifndef __ASSEMBLY__
 
+#ifndef CONFIG_PINCTRL
+
 #include <linux/compiler.h>
-#include <linux/gpio.h>
+#include <asm/blackfin.h>
+#include <asm/portmux.h>
+#include <asm/irq_handler.h>
 
 /***********************************************************
 *
@@ -45,7 +49,6 @@
 * MODIFICATION HISTORY :
 **************************************************************/
 
-#if !BFIN_GPIO_PINT
 void set_gpio_dir(unsigned, unsigned short);
 void set_gpio_inen(unsigned, unsigned short);
 void set_gpio_polar(unsigned, unsigned short);
@@ -115,7 +118,6 @@ struct gpio_port_t {
 	unsigned short dummy16;
 	unsigned short inen;
 };
-#endif
 
 #ifdef BFIN_SPECIAL_GPIO_BANKS
 void bfin_special_gpio_free(unsigned gpio);
@@ -127,25 +129,21 @@ void bfin_special_gpio_pm_hibernate_suspend(void);
 #endif
 
 #ifdef CONFIG_PM
-int bfin_pm_standby_ctrl(unsigned ctrl);
+void bfin_gpio_pm_hibernate_restore(void);
+void bfin_gpio_pm_hibernate_suspend(void);
+int bfin_gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl);
+int bfin_gpio_pm_standby_ctrl(unsigned ctrl);
 
 static inline int bfin_pm_standby_setup(void)
 {
-	return bfin_pm_standby_ctrl(1);
+	return bfin_gpio_pm_standby_ctrl(1);
 }
 
 static inline void bfin_pm_standby_restore(void)
 {
-	bfin_pm_standby_ctrl(0);
+	bfin_gpio_pm_standby_ctrl(0);
 }
 
-void bfin_gpio_pm_hibernate_restore(void);
-void bfin_gpio_pm_hibernate_suspend(void);
-void bfin_pint_suspend(void);
-void bfin_pint_resume(void);
-
-# if !BFIN_GPIO_PINT
-int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl);
 
 struct gpio_port_s {
 	unsigned short data;
@@ -161,7 +159,6 @@ struct gpio_port_s {
 	unsigned short reserved;
 	unsigned short mux;
 };
-# endif
 #endif /*CONFIG_PM*/
 
 /***********************************************************
@@ -178,36 +175,29 @@ struct gpio_port_s {
 *************************************************************
 * MODIFICATION HISTORY :
 **************************************************************/
-
-int bfin_gpio_request(unsigned gpio, const char *label);
-void bfin_gpio_free(unsigned gpio);
 int bfin_gpio_irq_request(unsigned gpio, const char *label);
 void bfin_gpio_irq_free(unsigned gpio);
-int bfin_gpio_direction_input(unsigned gpio);
-int bfin_gpio_direction_output(unsigned gpio, int value);
-int bfin_gpio_get_value(unsigned gpio);
-void bfin_gpio_set_value(unsigned gpio, int value);
+void bfin_gpio_irq_prepare(unsigned gpio);
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq - GPIO_IRQ_BASE;
+}
+#endif /* CONFIG_PINCTRL */
 
 #include <asm/irq.h>
 #include <asm/errno.h>
 
-#ifdef CONFIG_GPIOLIB
 #include <asm-generic/gpio.h>		/* cansleep wrappers */
 
 static inline int gpio_get_value(unsigned int gpio)
 {
-	if (gpio < MAX_BLACKFIN_GPIOS)
-		return bfin_gpio_get_value(gpio);
-	else
-		return __gpio_get_value(gpio);
+	return __gpio_get_value(gpio);
 }
 
 static inline void gpio_set_value(unsigned int gpio, int value)
 {
-	if (gpio < MAX_BLACKFIN_GPIOS)
-		bfin_gpio_set_value(gpio, value);
-	else
-		__gpio_set_value(gpio, value);
+	__gpio_set_value(gpio, value);
 }
 
 static inline int gpio_cansleep(unsigned int gpio)
@@ -219,113 +209,6 @@ static inline int gpio_to_irq(unsigned gpio)
 {
 	return __gpio_to_irq(gpio);
 }
-
-#else /* !CONFIG_GPIOLIB */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return bfin_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	return bfin_gpio_free(gpio);
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
-	return bfin_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-	return bfin_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
-{
-	return -EINVAL;
-}
-
-static inline int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
-{
-	int err;
-
-	err = bfin_gpio_request(gpio, label);
-	if (err)
-		return err;
-
-	if (flags & GPIOF_DIR_IN)
-		err = bfin_gpio_direction_input(gpio);
-	else
-		err = bfin_gpio_direction_output(gpio,
-			(flags & GPIOF_INIT_HIGH) ? 1 : 0);
-
-	if (err)
-		bfin_gpio_free(gpio);
-
-	return err;
-}
-
-static inline int gpio_request_array(const struct gpio *array, size_t num)
-{
-	int i, err;
-
-	for (i = 0; i < num; i++, array++) {
-		err = gpio_request_one(array->gpio, array->flags, array->label);
-		if (err)
-			goto err_free;
-	}
-	return 0;
-
-err_free:
-	while (i--)
-		bfin_gpio_free((--array)->gpio);
-	return err;
-}
-
-static inline void gpio_free_array(const struct gpio *array, size_t num)
-{
-	while (num--)
-		bfin_gpio_free((array++)->gpio);
-}
-
-static inline int __gpio_get_value(unsigned gpio)
-{
-	return bfin_gpio_get_value(gpio);
-}
-
-static inline void __gpio_set_value(unsigned gpio, int value)
-{
-	return bfin_gpio_set_value(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	return __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	if (likely(gpio < MAX_BLACKFIN_GPIOS))
-		return gpio + GPIO_IRQ_BASE;
-
-	return -EINVAL;
-}
-
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-#endif	/* !CONFIG_GPIOLIB */
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return (irq - GPIO_IRQ_BASE);
-}
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* __ARCH_BLACKFIN_GPIO_H__ */
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 735f24e07425..703dc7cf2ecc 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -7,7 +7,7 @@ extra-y := vmlinux.lds
 obj-y := \
 	entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
 	sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \
-	fixed_code.o reboot.o bfin_gpio.o bfin_dma.o \
+	fixed_code.o reboot.o bfin_dma.o \
 	exception.o dumpstack.o
 
 ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y)
@@ -16,6 +16,7 @@ else
     obj-y += time.o
 endif
 
+obj-$(CONFIG_GPIO_ADI)               += bfin_gpio.o
 obj-$(CONFIG_DYNAMIC_FTRACE)         += ftrace.o
 obj-$(CONFIG_FUNCTION_TRACER)        += ftrace-entry.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)  += ftrace.o
-- 
cgit v1.2.3


From eb8417aa703eff5ff43d0275f19b0a8e591d818d Mon Sep 17 00:00:00 2001
From: Peter Zijlstra
Date: Mon, 16 Sep 2013 09:23:02 +0200
Subject: perf/x86/intel: Remove division from the intel_pmu_drain_pebs_nhm()
 hot path

Only do the division in case we have to print the result out in a warning.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-43nl31erfbajwpfj254f6zji@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/cpu/perf_event_intel_ds.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index f364c13ddaa6..655d591b57a0 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -944,7 +944,7 @@ static void intel_pmu_drain_pebs_nhm(struct pt_regs *iregs)
 	struct perf_event *event = NULL;
 	void *at, *top;
 	u64 status = 0;
-	int bit, n;
+	int bit;
 
 	if (!x86_pmu.pebs_active)
 		return;
@@ -954,16 +954,16 @@ static void intel_pmu_drain_pebs_nhm(struct pt_regs *iregs)
 
 	ds->pebs_index = ds->pebs_buffer_base;
 
-	n = (top - at) / x86_pmu.pebs_record_size;
-	if (n <= 0)
+	if (unlikely(at > top))
 		return;
 
 	/*
 	 * Should not happen, we program the threshold at 1 and do not
 	 * set a reset value.
 	 */
-	WARN_ONCE(n > x86_pmu.max_pebs_events,
-		  "Unexpected number of pebs records %d\n", n);
+	WARN_ONCE(top - at > x86_pmu.max_pebs_events * x86_pmu.pebs_record_size,
+		  "Unexpected number of pebs records %ld\n",
+		  (top - at) / x86_pmu.pebs_record_size);
 
 	for (; at < top; at += x86_pmu.pebs_record_size) {
 		struct pebs_record_nhm *p = at;
-- 
cgit v1.2.3


From 9bd721c55c8a886b938a45198aab0ccb52f1f7fa Mon Sep 17 00:00:00 2001
From: Jason Low
Date: Fri, 13 Sep 2013 11:26:52 -0700
Subject: sched/balancing: Consider max cost of idle balance per sched domain

In this patch, we keep track of the max cost we spend doing idle load balancing
for each sched domain. If the avg time the CPU remains idle is less then the
time we have already spent on idle balancing + the max cost of idle balancing
in the sched domain, then we don't continue to attempt the balance. We also
keep a per rq variable, max_idle_balance_cost, which keeps track of the max
time spent on newidle load balances throughout all its domains so that we can
determine the avg_idle's max value.

By using the max, we avoid overrunning the average. This further reduces the
chance we attempt balancing when the CPU is not idle for longer than the cost
to balance.

Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1379096813-3032-3-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/metag/include/asm/topology.h |  1 +
 include/linux/sched.h             |  1 +
 include/linux/topology.h          |  3 +++
 kernel/sched/core.c               |  3 ++-
 kernel/sched/fair.c               | 16 ++++++++++++++++
 kernel/sched/sched.h              |  3 +++
 6 files changed, 26 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/metag/include/asm/topology.h b/arch/metag/include/asm/topology.h
index 23f5118f58db..db192924f4b0 100644
--- a/arch/metag/include/asm/topology.h
+++ b/arch/metag/include/asm/topology.h
@@ -26,6 +26,7 @@
 	.last_balance		= jiffies,		\
 	.balance_interval	= 1,			\
 	.nr_balance_failed	= 0,			\
+	.max_newidle_lb_cost	= 0,			\
 }
 
 #define cpu_to_node(cpu)	((void)(cpu), 0)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 6682da36b293..be078ff9157f 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -810,6 +810,7 @@ struct sched_domain {
 	unsigned int nr_balance_failed; /* initialise to 0 */
 
 	u64 last_update;
+	u64 max_newidle_lb_cost;
 
 #ifdef CONFIG_SCHEDSTATS
 	/* load_balance() stats */
diff --git a/include/linux/topology.h b/include/linux/topology.h
index d3cf0d6e7712..e2a2c3da2929 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -106,6 +106,7 @@ int arch_update_cpu_topology(void);
 	.last_balance		= jiffies,				\
 	.balance_interval	= 1,					\
 	.smt_gain		= 1178,	/* 15% */			\
+	.max_newidle_lb_cost	= 0,					\
 }
 #endif
 #endif /* CONFIG_SCHED_SMT */
@@ -135,6 +136,7 @@ int arch_update_cpu_topology(void);
 				,					\
 	.last_balance		= jiffies,				\
 	.balance_interval	= 1,					\
+	.max_newidle_lb_cost	= 0,					\
 }
 #endif
 #endif /* CONFIG_SCHED_MC */
@@ -166,6 +168,7 @@ int arch_update_cpu_topology(void);
 				,					\
 	.last_balance		= jiffies,				\
 	.balance_interval	= 1,					\
+	.max_newidle_lb_cost	= 0,					\
 }
 #endif
 
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 048f39e45761..c2283c54aed0 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -1330,7 +1330,7 @@ ttwu_do_wakeup(struct rq *rq, struct task_struct *p, int wake_flags)
 
 	if (rq->idle_stamp) {
 		u64 delta = rq_clock(rq) - rq->idle_stamp;
-		u64 max = 2*sysctl_sched_migration_cost;
+		u64 max = 2*rq->max_idle_balance_cost;
 
 		update_avg(&rq->avg_idle, delta);
 
@@ -6506,6 +6506,7 @@ void __init sched_init(void)
 		rq->online = 0;
 		rq->idle_stamp = 0;
 		rq->avg_idle = 2*sysctl_sched_migration_cost;
+		rq->max_idle_balance_cost = sysctl_sched_migration_cost;
 
 		INIT_LIST_HEAD(&rq->cfs_tasks);
 
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 0784ab6fcc59..ffc99d8f0a95 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -5396,6 +5396,7 @@ void idle_balance(int this_cpu, struct rq *this_rq)
 	struct sched_domain *sd;
 	int pulled_task = 0;
 	unsigned long next_balance = jiffies + HZ;
+	u64 curr_cost = 0;
 
 	this_rq->idle_stamp = rq_clock(this_rq);
 
@@ -5412,15 +5413,27 @@ void idle_balance(int this_cpu, struct rq *this_rq)
 	for_each_domain(this_cpu, sd) {
 		unsigned long interval;
 		int continue_balancing = 1;
+		u64 t0, domain_cost;
 
 		if (!(sd->flags & SD_LOAD_BALANCE))
 			continue;
 
+		if (this_rq->avg_idle < curr_cost + sd->max_newidle_lb_cost)
+			break;
+
 		if (sd->flags & SD_BALANCE_NEWIDLE) {
+			t0 = sched_clock_cpu(this_cpu);
+
 			/* If we've pulled tasks over stop searching: */
 			pulled_task = load_balance(this_cpu, this_rq,
 						   sd, CPU_NEWLY_IDLE,
 						   &continue_balancing);
+
+			domain_cost = sched_clock_cpu(this_cpu) - t0;
+			if (domain_cost > sd->max_newidle_lb_cost)
+				sd->max_newidle_lb_cost = domain_cost;
+
+			curr_cost += domain_cost;
 		}
 
 		interval = msecs_to_jiffies(sd->balance_interval);
@@ -5442,6 +5455,9 @@ void idle_balance(int this_cpu, struct rq *this_rq)
 		 */
 		this_rq->next_balance = next_balance;
 	}
+
+	if (curr_cost > this_rq->max_idle_balance_cost)
+		this_rq->max_idle_balance_cost = curr_cost;
 }
 
 /*
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 0d7544c3dba7..e82484db7699 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -476,6 +476,9 @@ struct rq {
 	u64 age_stamp;
 	u64 idle_stamp;
 	u64 avg_idle;
+
+	/* This is used to determine avg_idle's max value */
+	u64 max_idle_balance_cost;
 #endif
 
 #ifdef CONFIG_IRQ_TIME_ACCOUNTING
-- 
cgit v1.2.3


From f48627e686a69f5215cb0761e731edb3d9859dd9 Mon Sep 17 00:00:00 2001
From: Jason Low
Date: Fri, 13 Sep 2013 11:26:53 -0700
Subject: sched/balancing: Periodically decay max cost of idle balance

This patch builds on patch 2 and periodically decays that max value to
do idle balancing per sched domain by approximately 1% per second. Also
decay the rq's max_idle_balance_cost value.

Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1379096813-3032-4-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/metag/include/asm/topology.h |  1 +
 include/linux/sched.h             |  3 +++
 include/linux/topology.h          |  3 +++
 kernel/sched/fair.c               | 38 +++++++++++++++++++++++++++++++-------
 4 files changed, 38 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/metag/include/asm/topology.h b/arch/metag/include/asm/topology.h
index db192924f4b0..8e9c0b3b9691 100644
--- a/arch/metag/include/asm/topology.h
+++ b/arch/metag/include/asm/topology.h
@@ -27,6 +27,7 @@
 	.balance_interval	= 1,			\
 	.nr_balance_failed	= 0,			\
 	.max_newidle_lb_cost	= 0,			\
+	.next_decay_max_lb_cost	= jiffies,		\
 }
 
 #define cpu_to_node(cpu)	((void)(cpu), 0)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index be078ff9157f..b5344de1658b 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -810,7 +810,10 @@ struct sched_domain {
 	unsigned int nr_balance_failed; /* initialise to 0 */
 
 	u64 last_update;
+
+	/* idle_balance() stats */
 	u64 max_newidle_lb_cost;
+	unsigned long next_decay_max_lb_cost;
 
 #ifdef CONFIG_SCHEDSTATS
 	/* load_balance() stats */
diff --git a/include/linux/topology.h b/include/linux/topology.h
index e2a2c3da2929..12ae6ce997d6 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -107,6 +107,7 @@ int arch_update_cpu_topology(void);
 	.balance_interval	= 1,					\
 	.smt_gain		= 1178,	/* 15% */			\
 	.max_newidle_lb_cost	= 0,					\
+	.next_decay_max_lb_cost	= jiffies,				\
 }
 #endif
 #endif /* CONFIG_SCHED_SMT */
@@ -137,6 +138,7 @@ int arch_update_cpu_topology(void);
 	.last_balance		= jiffies,				\
 	.balance_interval	= 1,					\
 	.max_newidle_lb_cost	= 0,					\
+	.next_decay_max_lb_cost	= jiffies,				\
 }
 #endif
 #endif /* CONFIG_SCHED_MC */
@@ -169,6 +171,7 @@ int arch_update_cpu_topology(void);
 	.last_balance		= jiffies,				\
 	.balance_interval	= 1,					\
 	.max_newidle_lb_cost	= 0,					\
+	.next_decay_max_lb_cost	= jiffies,				\
 }
 #endif
 
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index ffc99d8f0a95..2b89cd244b0d 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -5681,15 +5681,39 @@ static void rebalance_domains(int cpu, enum cpu_idle_type idle)
 	/* Earliest time when we have to do rebalance again */
 	unsigned long next_balance = jiffies + 60*HZ;
 	int update_next_balance = 0;
-	int need_serialize;
+	int need_serialize, need_decay = 0;
+	u64 max_cost = 0;
 
 	update_blocked_averages(cpu);
 
 	rcu_read_lock();
 	for_each_domain(cpu, sd) {
+		/*
+		 * Decay the newidle max times here because this is a regular
+		 * visit to all the domains. Decay ~1% per second.
+		 */
+		if (time_after(jiffies, sd->next_decay_max_lb_cost)) {
+			sd->max_newidle_lb_cost =
+				(sd->max_newidle_lb_cost * 253) / 256;
+			sd->next_decay_max_lb_cost = jiffies + HZ;
+			need_decay = 1;
+		}
+		max_cost += sd->max_newidle_lb_cost;
+
 		if (!(sd->flags & SD_LOAD_BALANCE))
 			continue;
 
+		/*
+		 * Stop the load balance at this level. There is another
+		 * CPU in our sched group which is doing load balancing more
+		 * actively.
+		 */
+		if (!continue_balancing) {
+			if (need_decay)
+				continue;
+			break;
+		}
+
 		interval = sd->balance_interval;
 		if (idle != CPU_IDLE)
 			interval *= sd->busy_factor;
@@ -5723,14 +5747,14 @@ out:
 			next_balance = sd->last_balance + interval;
 			update_next_balance = 1;
 		}
-
+	}
+	if (need_decay) {
 		/*
-		 * Stop the load balance at this level. There is another
-		 * CPU in our sched group which is doing load balancing more
-		 * actively.
+		 * Ensure the rq-wide value also decays but keep it at a
+		 * reasonable floor to avoid funnies with rq->avg_idle.
 		 */
-		if (!continue_balancing)
-			break;
+		rq->max_idle_balance_cost =
+			max((u64)sysctl_sched_migration_cost, max_cost);
 	}
 	rcu_read_unlock();
 
-- 
cgit v1.2.3


From 92519bbc8af612975410def52bd462ca9af85cdb Mon Sep 17 00:00:00 2001
From: Peter Zijlstra
Date: Fri, 20 Sep 2013 13:08:50 +0200
Subject: perf/x86/intel: Fix build warning in intel_pmu_drain_pebs_nhm()

Fengguang Wu reported this build warning:

    arch/x86/kernel/cpu/perf_event_intel_ds.c: In function 'intel_pmu_drain_pebs_nhm':
    arch/x86/kernel/cpu/perf_event_intel_ds.c:964:2: warning: format '%ld' expects argument of type 'long int', but argument 4 has type 'int'

Because pointer arithmetics result type is bitness dependent there's no natural
type to use here, cast it to long.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-jbpauwxJqtf24luewcsdFith@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/cpu/perf_event_intel_ds.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index 655d591b57a0..54ff6ce519c1 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -963,7 +963,7 @@ static void intel_pmu_drain_pebs_nhm(struct pt_regs *iregs)
 	 */
 	WARN_ONCE(top - at > x86_pmu.max_pebs_events * x86_pmu.pebs_record_size,
 		  "Unexpected number of pebs records %ld\n",
-		  (top - at) / x86_pmu.pebs_record_size);
+		  (long)(top - at) / x86_pmu.pebs_record_size);
 
 	for (; at < top; at += x86_pmu.pebs_record_size) {
 		struct pebs_record_nhm *p = at;
-- 
cgit v1.2.3


From e9004f5039b3840089cb1cb0fe558a81e2bb55f0 Mon Sep 17 00:00:00 2001
From: Linus Walleij
Date: Mon, 9 Sep 2013 11:59:51 +0200
Subject: ARM: plat-iop: move the GPIO driver to drivers/gpio

Move the IOP GPIO driver to live with its siblings in the
GPIO subsystem.

Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mikael Pettersson <mikpe@it.uu.se>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/Kconfig           |  2 +
 arch/arm/plat-iop/Makefile |  2 -
 arch/arm/plat-iop/gpio.c   | 93 ----------------------------------------------
 drivers/gpio/Kconfig       |  9 +++++
 drivers/gpio/Makefile      |  1 +
 drivers/gpio/gpio-iop.c    | 93 ++++++++++++++++++++++++++++++++++++++++++++++
 6 files changed, 105 insertions(+), 95 deletions(-)
 delete mode 100644 arch/arm/plat-iop/gpio.c
 create mode 100644 drivers/gpio/gpio-iop.c

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3f7714d8d2d2..fc8c0928bfaf 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -457,6 +457,7 @@ config ARCH_IOP32X
 	depends on MMU
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
+	select GPIO_IOP
 	select NEED_MACH_GPIO_H
 	select NEED_RET_TO_USER
 	select PCI
@@ -470,6 +471,7 @@ config ARCH_IOP33X
 	depends on MMU
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
+	select GPIO_IOP
 	select NEED_MACH_GPIO_H
 	select NEED_RET_TO_USER
 	select PCI
diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile
index a99dc15a70f7..224e56c6049b 100644
--- a/arch/arm/plat-iop/Makefile
+++ b/arch/arm/plat-iop/Makefile
@@ -5,7 +5,6 @@
 obj-y :=
 
 # IOP32X
-obj-$(CONFIG_ARCH_IOP32X) += gpio.o
 obj-$(CONFIG_ARCH_IOP32X) += i2c.o
 obj-$(CONFIG_ARCH_IOP32X) += pci.o
 obj-$(CONFIG_ARCH_IOP32X) += setup.o
@@ -16,7 +15,6 @@ obj-$(CONFIG_ARCH_IOP32X) += pmu.o
 obj-$(CONFIG_ARCH_IOP32X) += restart.o
 
 # IOP33X
-obj-$(CONFIG_ARCH_IOP33X) += gpio.o
 obj-$(CONFIG_ARCH_IOP33X) += i2c.o
 obj-$(CONFIG_ARCH_IOP33X) += pci.o
 obj-$(CONFIG_ARCH_IOP33X) += setup.o
diff --git a/arch/arm/plat-iop/gpio.c b/arch/arm/plat-iop/gpio.c
deleted file mode 100644
index 697de6dc4936..000000000000
--- a/arch/arm/plat-iop/gpio.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * arch/arm/plat-iop/gpio.c
- * GPIO handling for Intel IOP3xx processors.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/export.h>
-#include <asm/hardware/iop3xx.h>
-#include <mach/gpio.h>
-
-void gpio_line_config(int line, int direction)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (direction == GPIO_IN) {
-		*IOP3XX_GPOE |= 1 << line;
-	} else if (direction == GPIO_OUT) {
-		*IOP3XX_GPOE &= ~(1 << line);
-	}
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_line_config);
-
-int gpio_line_get(int line)
-{
-	return !!(*IOP3XX_GPID & (1 << line));
-}
-EXPORT_SYMBOL(gpio_line_get);
-
-void gpio_line_set(int line, int value)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (value == GPIO_LOW) {
-		*IOP3XX_GPOD &= ~(1 << line);
-	} else if (value == GPIO_HIGH) {
-		*IOP3XX_GPOD |= 1 << line;
-	}
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_line_set);
-
-static int iop3xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-{
-	gpio_line_config(gpio, GPIO_IN);
-	return 0;
-}
-
-static int iop3xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
-{
-	gpio_line_set(gpio, level);
-	gpio_line_config(gpio, GPIO_OUT);
-	return 0;
-}
-
-static int iop3xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
-{
-	return gpio_line_get(gpio);
-}
-
-static void iop3xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
-{
-	gpio_line_set(gpio, value);
-}
-
-static struct gpio_chip iop3xx_chip = {
-	.label			= "iop3xx",
-	.direction_input	= iop3xx_gpio_direction_input,
-	.get			= iop3xx_gpio_get_value,
-	.direction_output	= iop3xx_gpio_direction_output,
-	.set			= iop3xx_gpio_set_value,
-	.base			= 0,
-	.ngpio			= IOP3XX_N_GPIOS,
-};
-
-static int __init iop3xx_gpio_setup(void)
-{
-	return gpiochip_add(&iop3xx_chip);
-}
-arch_initcall(iop3xx_gpio_setup);
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b6ed304863eb..cc30426d31ec 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -320,6 +320,15 @@ config GPIO_ICH
 
 	  If unsure, say N.
 
+config GPIO_IOP
+	tristate "Intel IOP GPIO"
+	depends on ARM && (ARCH_IOP32X || ARCH_IOP33X)
+	help
+	  Say yes here to support the GPIO functionality of a number of Intel
+	  IOP32X or IOP33X.
+
+	  If unsure, say N.
+
 config GPIO_VX855
 	tristate "VIA VX855/VX875 GPIO"
 	depends on PCI
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 98e23ebba2cf..06e5662aa4ec 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_GPIO_F7188X)	+= gpio-f7188x.o
 obj-$(CONFIG_GPIO_GE_FPGA)	+= gpio-ge.o
 obj-$(CONFIG_GPIO_GRGPIO)	+= gpio-grgpio.o
 obj-$(CONFIG_GPIO_ICH)		+= gpio-ich.o
+obj-$(CONFIG_GPIO_IOP)		+= gpio-iop.o
 obj-$(CONFIG_GPIO_IT8761E)	+= gpio-it8761e.o
 obj-$(CONFIG_GPIO_JANZ_TTL)	+= gpio-janz-ttl.o
 obj-$(CONFIG_GPIO_KEMPLD)	+= gpio-kempld.o
diff --git a/drivers/gpio/gpio-iop.c b/drivers/gpio/gpio-iop.c
new file mode 100644
index 000000000000..697de6dc4936
--- /dev/null
+++ b/drivers/gpio/gpio-iop.c
@@ -0,0 +1,93 @@
+/*
+ * arch/arm/plat-iop/gpio.c
+ * GPIO handling for Intel IOP3xx processors.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/export.h>
+#include <asm/hardware/iop3xx.h>
+#include <mach/gpio.h>
+
+void gpio_line_config(int line, int direction)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (direction == GPIO_IN) {
+		*IOP3XX_GPOE |= 1 << line;
+	} else if (direction == GPIO_OUT) {
+		*IOP3XX_GPOE &= ~(1 << line);
+	}
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_line_config);
+
+int gpio_line_get(int line)
+{
+	return !!(*IOP3XX_GPID & (1 << line));
+}
+EXPORT_SYMBOL(gpio_line_get);
+
+void gpio_line_set(int line, int value)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (value == GPIO_LOW) {
+		*IOP3XX_GPOD &= ~(1 << line);
+	} else if (value == GPIO_HIGH) {
+		*IOP3XX_GPOD |= 1 << line;
+	}
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_line_set);
+
+static int iop3xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	gpio_line_config(gpio, GPIO_IN);
+	return 0;
+}
+
+static int iop3xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
+{
+	gpio_line_set(gpio, level);
+	gpio_line_config(gpio, GPIO_OUT);
+	return 0;
+}
+
+static int iop3xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	return gpio_line_get(gpio);
+}
+
+static void iop3xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
+{
+	gpio_line_set(gpio, value);
+}
+
+static struct gpio_chip iop3xx_chip = {
+	.label			= "iop3xx",
+	.direction_input	= iop3xx_gpio_direction_input,
+	.get			= iop3xx_gpio_get_value,
+	.direction_output	= iop3xx_gpio_direction_output,
+	.set			= iop3xx_gpio_set_value,
+	.base			= 0,
+	.ngpio			= IOP3XX_N_GPIOS,
+};
+
+static int __init iop3xx_gpio_setup(void)
+{
+	return gpiochip_add(&iop3xx_chip);
+}
+arch_initcall(iop3xx_gpio_setup);
-- 
cgit v1.2.3


From 7111f8780fcf770d8624d758fd240e585adf7d3c Mon Sep 17 00:00:00 2001
From: Linus Walleij
Date: Mon, 9 Sep 2013 14:45:47 +0200
Subject: ARM: iop32x: request and issue reset using gpio

As the IOP GPIO driver supports gpiolib we can use the standard
GPIO calls to issue a reset of the machine instead of using the
custom gpio_line_set/config calls. Also request the GPIO when
initializing the machine.

Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mikael Pettersson <mikpe@it.uu.se>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/mach-iop32x/n2100.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 069144300b77..6bace5bc7ebb 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -30,6 +30,7 @@
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -288,8 +289,14 @@ static void n2100_power_off(void)
 
 static void n2100_restart(enum reboot_mode mode, const char *cmd)
 {
-	gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
-	gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
+	int ret;
+
+	ret = gpio_direction_output(N2100_HARDWARE_RESET, 0);
+	if (ret) {
+		pr_crit("could not drive reset GPIO low\n");
+		return;
+	}
+	/* Wait for reset to happen */
 	while (1)
 		;
 }
@@ -308,6 +315,19 @@ static void power_button_poll(unsigned long dummy)
 	add_timer(&power_button_poll_timer);
 }
 
+static int __init n2100_request_gpios(void)
+{
+	int ret;
+
+	if (!machine_is_n2100())
+		return 0;
+
+	ret = gpio_request(N2100_HARDWARE_RESET, "reset");
+	if (ret)
+		pr_err("could not request reset GPIO\n");
+	return 0;
+}
+device_initcall(n2100_request_gpios);
 
 static void __init n2100_init_machine(void)
 {
-- 
cgit v1.2.3


From afc3b79f5dbddd4ab210beb9cc6da102a1032b89 Mon Sep 17 00:00:00 2001
From: Linus Walleij
Date: Mon, 9 Sep 2013 14:53:02 +0200
Subject: ARM: iop32x: read N2100 power key using gpiolib

Refrain from using the custom gpio_line_get() to read the power
key on the N2100, use the gpiolib function gpio_get() instead.
Also request the line in the GPIOs initicall, and move the poll
timer setup to that inicall so the gpio chip is available before
we request this GPIO and start to poll it.

Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mikael Pettersson <mikpe@it.uu.se>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/mach-iop32x/n2100.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 6bace5bc7ebb..bc40a97050a1 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -306,7 +306,7 @@ static struct timer_list power_button_poll_timer;
 
 static void power_button_poll(unsigned long dummy)
 {
-	if (gpio_line_get(N2100_POWER_BUTTON) == 0) {
+	if (gpio_get_value(N2100_POWER_BUTTON) == 0) {
 		ctrl_alt_del();
 		return;
 	}
@@ -325,6 +325,20 @@ static int __init n2100_request_gpios(void)
 	ret = gpio_request(N2100_HARDWARE_RESET, "reset");
 	if (ret)
 		pr_err("could not request reset GPIO\n");
+
+	ret = gpio_request(N2100_POWER_BUTTON, "power");
+	if (ret)
+		pr_err("could not request power GPIO\n");
+	else {
+		ret = gpio_direction_input(N2100_POWER_BUTTON);
+		if (ret)
+			pr_err("could not set power GPIO as input\n");
+	}
+	/* Set up power button poll timer */
+	init_timer(&power_button_poll_timer);
+	power_button_poll_timer.function = power_button_poll;
+	power_button_poll_timer.expires = jiffies + (HZ / 10);
+	add_timer(&power_button_poll_timer);
 	return 0;
 }
 device_initcall(n2100_request_gpios);
@@ -341,11 +355,6 @@ static void __init n2100_init_machine(void)
 		ARRAY_SIZE(n2100_i2c_devices));
 
 	pm_power_off = n2100_power_off;
-
-	init_timer(&power_button_poll_timer);
-	power_button_poll_timer.function = power_button_poll;
-	power_button_poll_timer.expires = jiffies + (HZ / 10);
-	add_timer(&power_button_poll_timer);
 }
 
 MACHINE_START(N2100, "Thecus N2100")
-- 
cgit v1.2.3


From 51a97d829e32b7a1b960d3365e4c2546c9c792aa Mon Sep 17 00:00:00 2001
From: Linus Walleij
Date: Mon, 9 Sep 2013 16:07:42 +0200
Subject: ARM: plat-iop: remove custom complex GPIO implementation

The kernel will now only use gpiolib to access GPIOs, so remove
the complex GPIO flag and the custom implementation.

Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mikael Pettersson <mikpe@it.uu.se>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/include/asm/hardware/iop3xx-gpio.h | 43 -----------------------------
 arch/arm/include/asm/hardware/iop3xx.h      |  3 --
 drivers/gpio/gpio-iop.c                     |  9 ++----
 3 files changed, 3 insertions(+), 52 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h
index 9eda7dc92ad8..e2a097078a06 100644
--- a/arch/arm/include/asm/hardware/iop3xx-gpio.h
+++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h
@@ -28,48 +28,5 @@
 #include <mach/hardware.h>
 #include <asm-generic/gpio.h>
 
-#define __ARM_GPIOLIB_COMPLEX
-
-#define IOP3XX_N_GPIOS	8
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (gpio > IOP3XX_N_GPIOS)
-		return __gpio_get_value(gpio);
-
-	return gpio_line_get(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (gpio > IOP3XX_N_GPIOS) {
-		__gpio_set_value(gpio, value);
-		return;
-	}
-	gpio_line_set(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	if (gpio < IOP3XX_N_GPIOS)
-		return 0;
-	else
-		return __gpio_cansleep(gpio);
-}
-
-/*
- * The GPIOs are not generating any interrupt
- * Note : manuals are not clear about this
- */
-static inline int gpio_to_irq(int gpio)
-{
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(int gpio)
-{
-	return -EINVAL;
-}
-
 #endif
 
diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 423744bf18eb..6af9c2841fcb 100644
--- a/arch/arm/include/asm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -25,9 +25,6 @@
 #define IOP3XX_GPIO_LINE(x)	(x)
 
 #ifndef __ASSEMBLY__
-extern void gpio_line_config(int line, int direction);
-extern int  gpio_line_get(int line);
-extern void gpio_line_set(int line, int value);
 extern int init_atu;
 extern int iop3xx_get_init_atu(void);
 #endif
diff --git a/drivers/gpio/gpio-iop.c b/drivers/gpio/gpio-iop.c
index d4a170dfe504..17cc7010cd04 100644
--- a/drivers/gpio/gpio-iop.c
+++ b/drivers/gpio/gpio-iop.c
@@ -19,7 +19,7 @@
 
 #define IOP3XX_N_GPIOS	8
 
-void gpio_line_config(int line, int direction)
+static void gpio_line_config(int line, int direction)
 {
 	unsigned long flags;
 
@@ -31,15 +31,13 @@ void gpio_line_config(int line, int direction)
 	}
 	local_irq_restore(flags);
 }
-EXPORT_SYMBOL(gpio_line_config);
 
-int gpio_line_get(int line)
+static int gpio_line_get(int line)
 {
 	return !!(*IOP3XX_GPID & (1 << line));
 }
-EXPORT_SYMBOL(gpio_line_get);
 
-void gpio_line_set(int line, int value)
+static void gpio_line_set(int line, int value)
 {
 	unsigned long flags;
 
@@ -51,7 +49,6 @@ void gpio_line_set(int line, int value)
 	}
 	local_irq_restore(flags);
 }
-EXPORT_SYMBOL(gpio_line_set);
 
 static int iop3xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
 {
-- 
cgit v1.2.3


From 7b85b867b99044da93f83851c806d1e324d49ed5 Mon Sep 17 00:00:00 2001
From: Linus Walleij
Date: Mon, 9 Sep 2013 16:39:51 +0200
Subject: ARM: plat-iop: instantiate GPIO from platform device

This converts the IOP32x and IOP33x platforms to pass their
base address offset by a resource attached to a platform device
instead of using static offset macros implicitly passed
through <linux/gpio.h> including <mach/gpio.h>. Delete the
local <mach/gpio.h> and <asm/hardware/iop3xx-gpio.h> headers
and remove the selection of NEED_MACH_GPIO_H.

Pass the virtual address as a resource in the platform device
at this point for bisectability, next patch will pass the
physical address as is custom.

Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mikael Pettersson <mikpe@it.uu.se>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/Kconfig                            |  2 --
 arch/arm/include/asm/hardware/iop3xx-gpio.h | 32 -------------------------
 arch/arm/include/asm/hardware/iop3xx.h      |  9 --------
 arch/arm/mach-iop32x/em7210.c               |  2 ++
 arch/arm/mach-iop32x/glantank.c             |  2 ++
 arch/arm/mach-iop32x/gpio-iop32x.h          | 10 ++++++++
 arch/arm/mach-iop32x/include/mach/gpio.h    |  6 -----
 arch/arm/mach-iop32x/include/mach/iop32x.h  |  1 -
 arch/arm/mach-iop32x/iq31244.c              |  2 ++
 arch/arm/mach-iop32x/iq80321.c              |  2 ++
 arch/arm/mach-iop32x/n2100.c                |  2 ++
 arch/arm/mach-iop33x/include/mach/gpio.h    |  6 -----
 arch/arm/mach-iop33x/include/mach/iop33x.h  |  1 -
 arch/arm/mach-iop33x/iq80331.c              |  7 ++++++
 arch/arm/mach-iop33x/iq80332.c              |  7 ++++++
 drivers/gpio/gpio-iop.c                     | 36 +++++++++++++++++++++++++++--
 16 files changed, 68 insertions(+), 59 deletions(-)
 delete mode 100644 arch/arm/include/asm/hardware/iop3xx-gpio.h
 create mode 100644 arch/arm/mach-iop32x/gpio-iop32x.h
 delete mode 100644 arch/arm/mach-iop32x/include/mach/gpio.h
 delete mode 100644 arch/arm/mach-iop33x/include/mach/gpio.h

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fc8c0928bfaf..e83529b42ac6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -458,7 +458,6 @@ config ARCH_IOP32X
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
 	select GPIO_IOP
-	select NEED_MACH_GPIO_H
 	select NEED_RET_TO_USER
 	select PCI
 	select PLAT_IOP
@@ -472,7 +471,6 @@ config ARCH_IOP33X
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
 	select GPIO_IOP
-	select NEED_MACH_GPIO_H
 	select NEED_RET_TO_USER
 	select PCI
 	select PLAT_IOP
diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h
deleted file mode 100644
index e2a097078a06..000000000000
--- a/arch/arm/include/asm/hardware/iop3xx-gpio.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/iop3xx-gpio.h
- *
- * IOP3xx GPIO wrappers
- *
- * Copyright (c) 2008 Arnaud Patard <arnaud.patard@rtp-net.org>
- * Based on IXP4XX gpio.h file
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
-#define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
-
-#include <mach/hardware.h>
-#include <asm-generic/gpio.h>
-
-#endif
-
diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 6af9c2841fcb..2594a95ff19a 100644
--- a/arch/arm/include/asm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -18,10 +18,6 @@
 /*
  * IOP3XX GPIO handling
  */
-#define GPIO_IN			0
-#define GPIO_OUT		1
-#define GPIO_LOW		0
-#define GPIO_HIGH		1
 #define IOP3XX_GPIO_LINE(x)	(x)
 
 #ifndef __ASSEMBLY__
@@ -165,11 +161,6 @@ extern int iop3xx_get_init_atu(void);
 /* PERCR0 DOESN'T EXIST - index from 1! */
 #define IOP3XX_PERCR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0710)
 
-/* General Purpose I/O  */
-#define IOP3XX_GPOE		(volatile u32 *)IOP3XX_GPIO_REG(0x0000)
-#define IOP3XX_GPID		(volatile u32 *)IOP3XX_GPIO_REG(0x0004)
-#define IOP3XX_GPOD		(volatile u32 *)IOP3XX_GPIO_REG(0x0008)
-
 /* Timers  */
 #define IOP3XX_TU_TMR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0000)
 #define IOP3XX_TU_TMR1		(volatile u32 *)IOP3XX_TIMER_REG(0x0004)
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 31fbb6c61b25..177cd073a83b 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -32,6 +32,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach-types.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 static void __init em7210_timer_init(void)
 {
@@ -183,6 +184,7 @@ void em7210_power_off(void)
 
 static void __init em7210_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&em7210_serial_device);
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index ac304705fe68..547b2342d61a 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -34,6 +34,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 /*
  * GLAN Tank timer tick configuration.
@@ -187,6 +188,7 @@ static void glantank_power_off(void)
 
 static void __init glantank_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&glantank_flash_device);
diff --git a/arch/arm/mach-iop32x/gpio-iop32x.h b/arch/arm/mach-iop32x/gpio-iop32x.h
new file mode 100644
index 000000000000..b8710a63a13e
--- /dev/null
+++ b/arch/arm/mach-iop32x/gpio-iop32x.h
@@ -0,0 +1,10 @@
+static struct resource iop32x_gpio_res[] = {
+	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4), 0x10),
+};
+
+static inline void register_iop32x_gpio(void)
+{
+	platform_device_register_simple("gpio-iop", 0,
+					iop32x_gpio_res,
+					ARRAY_SIZE(iop32x_gpio_res));
+}
diff --git a/arch/arm/mach-iop32x/include/mach/gpio.h b/arch/arm/mach-iop32x/include/mach/gpio.h
deleted file mode 100644
index 708f4ec9db1d..000000000000
--- a/arch/arm/mach-iop32x/include/mach/gpio.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_ARCH_IOP32X_GPIO_H
-#define __ASM_ARCH_IOP32X_GPIO_H
-
-#include <asm/hardware/iop3xx-gpio.h>
-
-#endif
diff --git a/arch/arm/mach-iop32x/include/mach/iop32x.h b/arch/arm/mach-iop32x/include/mach/iop32x.h
index 941f363aca56..56ec864ec313 100644
--- a/arch/arm/mach-iop32x/include/mach/iop32x.h
+++ b/arch/arm/mach-iop32x/include/mach/iop32x.h
@@ -19,7 +19,6 @@
  * Peripherals that are shared between the iop32x and iop33x but
  * located at different addresses.
  */
-#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4 + (reg))
 #define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
 
 #include <asm/hardware/iop3xx.h>
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index f2cd2966212d..0e1392b20d18 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -37,6 +37,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 /*
  * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
@@ -283,6 +284,7 @@ void ep80219_power_off(void)
 
 static void __init iq31244_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&iq31244_flash_device);
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 015435de90dd..66782ff1f46a 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -33,6 +33,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 /*
  * IQ80321 timer tick configuration.
@@ -170,6 +171,7 @@ static struct platform_device iq80321_serial_device = {
 
 static void __init iq80321_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&iq80321_flash_device);
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index bc40a97050a1..c1cd80ecc219 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -41,6 +41,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 /*
  * N2100 timer tick configuration.
@@ -345,6 +346,7 @@ device_initcall(n2100_request_gpios);
 
 static void __init n2100_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&n2100_flash_device);
 	platform_device_register(&n2100_serial_device);
diff --git a/arch/arm/mach-iop33x/include/mach/gpio.h b/arch/arm/mach-iop33x/include/mach/gpio.h
deleted file mode 100644
index ddd55bba9bb9..000000000000
--- a/arch/arm/mach-iop33x/include/mach/gpio.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_ARCH_IOP33X_GPIO_H
-#define __ASM_ARCH_IOP33X_GPIO_H
-
-#include <asm/hardware/iop3xx-gpio.h>
-
-#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iop33x.h b/arch/arm/mach-iop33x/include/mach/iop33x.h
index a89c0a234bff..c95122653094 100644
--- a/arch/arm/mach-iop33x/include/mach/iop33x.h
+++ b/arch/arm/mach-iop33x/include/mach/iop33x.h
@@ -18,7 +18,6 @@
  * Peripherals that are shared between the iop32x and iop33x but
  * located at different addresses.
  */
-#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg))
 #define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg))
 
 #include <asm/hardware/iop3xx.h>
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index c43304a10fa7..25741c4c92de 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -122,8 +122,15 @@ static struct platform_device iq80331_flash_device = {
 	.resource	= &iq80331_flash_resource,
 };
 
+static struct resource iq80331_gpio_res[] = {
+	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780), 0x10),
+};
+
 static void __init iq80331_init_machine(void)
 {
+	platform_device_register_simple("gpio-iop", 0,
+					iq80331_gpio_res,
+					ARRAY_SIZE(iq80331_gpio_res));
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&iop33x_uart0_device);
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 8192987e78e5..a3b56e1c2ad4 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -122,8 +122,15 @@ static struct platform_device iq80332_flash_device = {
 	.resource	= &iq80332_flash_resource,
 };
 
+static struct resource iq80332_gpio_res[] = {
+	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780), 0x10),
+};
+
 static void __init iq80332_init_machine(void)
 {
+	platform_device_register_simple("gpio-iop", 0,
+					iq80332_gpio_res,
+					ARRAY_SIZE(iq80332_gpio_res));
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&iop33x_uart0_device);
diff --git a/drivers/gpio/gpio-iop.c b/drivers/gpio/gpio-iop.c
index 17cc7010cd04..24a86b05dc8c 100644
--- a/drivers/gpio/gpio-iop.c
+++ b/drivers/gpio/gpio-iop.c
@@ -16,9 +16,23 @@
 #include <linux/errno.h>
 #include <linux/gpio.h>
 #include <linux/export.h>
+#include <linux/platform_device.h>
 
 #define IOP3XX_N_GPIOS	8
 
+#define GPIO_IN			0
+#define GPIO_OUT		1
+#define GPIO_LOW		0
+#define GPIO_HIGH		1
+
+/* Memory base offset */
+static void __iomem *base;
+
+#define IOP3XX_GPIO_REG(reg)	(base + (reg))
+#define IOP3XX_GPOE		(volatile u32 *)IOP3XX_GPIO_REG(0x0000)
+#define IOP3XX_GPID		(volatile u32 *)IOP3XX_GPIO_REG(0x0004)
+#define IOP3XX_GPOD		(volatile u32 *)IOP3XX_GPIO_REG(0x0008)
+
 static void gpio_line_config(int line, int direction)
 {
 	unsigned long flags;
@@ -83,8 +97,26 @@ static struct gpio_chip iop3xx_chip = {
 	.ngpio			= IOP3XX_N_GPIOS,
 };
 
-static int __init iop3xx_gpio_setup(void)
+static int iop3xx_gpio_probe(struct platform_device *pdev)
 {
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = (void *) res->start;
+
 	return gpiochip_add(&iop3xx_chip);
 }
-arch_initcall(iop3xx_gpio_setup);
+
+static struct platform_driver iop3xx_gpio_driver = {
+	.driver = {
+		.name = "gpio-iop",
+		.owner = THIS_MODULE,
+	},
+	.probe = iop3xx_gpio_probe,
+};
+
+static int __init iop3xx_gpio_init(void)
+{
+	return platform_driver_register(&iop3xx_gpio_driver);
+}
+arch_initcall(iop3xx_gpio_init);
-- 
cgit v1.2.3


From e34ca9de0b3575fc7e94b1f520169fc7024c6dd2 Mon Sep 17 00:00:00 2001
From: Linus Walleij
Date: Mon, 9 Sep 2013 16:59:54 +0200
Subject: ARM: plat-iop: pass physical base for GPIO

This alters the IOP platforms to pass a physical base for their
GPIO blocks and alters the driver to remap it when probing
instead of relying on the virtual addresses to be used.

Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mikael Pettersson <mikpe@it.uu.se>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/mach-iop32x/gpio-iop32x.h | 2 +-
 arch/arm/mach-iop33x/iq80331.c     | 2 +-
 arch/arm/mach-iop33x/iq80332.c     | 2 +-
 drivers/gpio/gpio-iop.c            | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-iop32x/gpio-iop32x.h b/arch/arm/mach-iop32x/gpio-iop32x.h
index b8710a63a13e..3c7309c02029 100644
--- a/arch/arm/mach-iop32x/gpio-iop32x.h
+++ b/arch/arm/mach-iop32x/gpio-iop32x.h
@@ -1,5 +1,5 @@
 static struct resource iop32x_gpio_res[] = {
-	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4), 0x10),
+	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x07c4), 0x10),
 };
 
 static inline void register_iop32x_gpio(void)
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index 25741c4c92de..e2cb65cfbe23 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -123,7 +123,7 @@ static struct platform_device iq80331_flash_device = {
 };
 
 static struct resource iq80331_gpio_res[] = {
-	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780), 0x10),
+	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x1780), 0x10),
 };
 
 static void __init iq80331_init_machine(void)
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index a3b56e1c2ad4..0b6269d94f89 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -123,7 +123,7 @@ static struct platform_device iq80332_flash_device = {
 };
 
 static struct resource iq80332_gpio_res[] = {
-	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780), 0x10),
+	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x1780), 0x10),
 };
 
 static void __init iq80332_init_machine(void)
diff --git a/drivers/gpio/gpio-iop.c b/drivers/gpio/gpio-iop.c
index 0d991d732467..c22a61be3a9c 100644
--- a/drivers/gpio/gpio-iop.c
+++ b/drivers/gpio/gpio-iop.c
@@ -110,7 +110,7 @@ static int iop3xx_gpio_probe(struct platform_device *pdev)
 	struct resource *res;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = (void *) res->start;
+	base = devm_ioremap_resource(&pdev->dev, res);
 
 	return gpiochip_add(&iop3xx_chip);
 }
-- 
cgit v1.2.3


From 741ecef62a37bcc368ff8c7282f810327edc3d94 Mon Sep 17 00:00:00 2001
From: Sonic Zhang
Date: Tue, 3 Sep 2013 16:29:01 +0800
Subject: blackfin: pinctrl-adi2: Enable PINCTRL framework for BF54x and BF60x.

- Remove unused macro MAX_RESOURCES
- Override blackfin legacy peripheral pinmux request and free APIs by
devm_pinctrl_get_select_default() to init the peripheral portmux setting.

v3-chagnes:
- Move pinctrl soc data out of blackfin arch folder.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/blackfin/Kconfig                           |  4 ++++
 arch/blackfin/include/asm/portmux.h             | 19 +++++++++++++++++--
 arch/blackfin/mach-bf548/include/mach/portmux.h |  2 --
 arch/blackfin/mach-bf609/include/mach/portmux.h |  2 --
 4 files changed, 21 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index a1199b2e9d2b..74314bd8be39 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -324,6 +324,10 @@ config GPIO_ADI
 	def_bool y
 	depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561)
 
+config PINCTRL
+	def_bool y
+	depends on BF54x || BF60x
+
 config MEM_MT48LC64M4A2FB_7E
 	bool
 	depends on (BFIN533_STAMP)
diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h
index 9b1e2c37b324..7aa20436e799 100644
--- a/arch/blackfin/include/asm/portmux.h
+++ b/arch/blackfin/include/asm/portmux.h
@@ -17,14 +17,29 @@
 #define P_MAYSHARE	0x2000
 #define P_DONTCARE	0x1000
 
-
+#ifdef CONFIG_PINCTRL
+#include <asm/irq_handler.h>
+
+#define gpio_pint_regs bfin_pint_regs
+#define adi_internal_set_wake bfin_internal_set_wake
+
+#define peripheral_request(per, label) 0
+#define peripheral_free(per)
+#define peripheral_request_list(per, label) \
+	(pdev ? (IS_ERR(devm_pinctrl_get_select_default(&pdev->dev)) \
+	? -EINVAL : 0) : 0)
+#define peripheral_free_list(per)
+#else
 int peripheral_request(unsigned short per, const char *label);
 void peripheral_free(unsigned short per);
 int peripheral_request_list(const unsigned short per[], const char *label);
 void peripheral_free_list(const unsigned short per[]);
+#endif
 
-#include <asm/gpio.h>
+#include <linux/err.h>
+#include <linux/pinctrl/pinctrl.h>
 #include <mach/portmux.h>
+#include <linux/gpio.h>
 
 #ifndef P_SPORT2_TFS
 #define P_SPORT2_TFS P_UNDEF
diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h
index e22246202730..d9f8632d7d09 100644
--- a/arch/blackfin/mach-bf548/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf548/include/mach/portmux.h
@@ -7,8 +7,6 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
-#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
-
 #define P_SPORT2_TFS	(P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0))
 #define P_SPORT2_DTSEC	(P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0))
 #define P_SPORT2_DTPRI	(P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0))
diff --git a/arch/blackfin/mach-bf609/include/mach/portmux.h b/arch/blackfin/mach-bf609/include/mach/portmux.h
index 2e1a51c25098..fe34191eef0b 100644
--- a/arch/blackfin/mach-bf609/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf609/include/mach/portmux.h
@@ -7,8 +7,6 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
-#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
-
 /* EMAC RMII Port Mux */
 #define P_MII0_MDC	(P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(0))
 #define P_MII0_MDIO	(P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(0))
-- 
cgit v1.2.3


From 1e019421bca68cfae1a61a09d9d49cf6a9e2143b Mon Sep 17 00:00:00 2001
From: Mike Travis
Date: Mon, 23 Sep 2013 16:25:00 -0500
Subject: x86/UV: Move NMI support

This patch moves the UV NMI support from the x2apic file to a
new separate uv_nmi.c file in preparation for the next sequence
of patches. It prevents upcoming bloat of the x2apic file, and
has the added benefit of putting the upcoming /sys/module
parameters under the name 'uv_nmi' instead of 'x2apic_uv_x',
which was obscure.

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Reviewed-by: Hedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20130923212500.183295611@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/include/asm/uv/uv.h       |   2 +
 arch/x86/kernel/apic/x2apic_uv_x.c |  69 -------------------------
 arch/x86/platform/uv/Makefile      |   2 +-
 arch/x86/platform/uv/uv_nmi.c      | 102 +++++++++++++++++++++++++++++++++++++
 4 files changed, 105 insertions(+), 70 deletions(-)
 create mode 100644 arch/x86/platform/uv/uv_nmi.c

(limited to 'arch')

diff --git a/arch/x86/include/asm/uv/uv.h b/arch/x86/include/asm/uv/uv.h
index 062921ef34e9..6b964a0b86d1 100644
--- a/arch/x86/include/asm/uv/uv.h
+++ b/arch/x86/include/asm/uv/uv.h
@@ -12,6 +12,7 @@ extern enum uv_system_type get_uv_system_type(void);
 extern int is_uv_system(void);
 extern void uv_cpu_init(void);
 extern void uv_nmi_init(void);
+extern void uv_register_nmi_notifier(void);
 extern void uv_system_init(void);
 extern const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 						 struct mm_struct *mm,
@@ -25,6 +26,7 @@ static inline enum uv_system_type get_uv_system_type(void) { return UV_NONE; }
 static inline int is_uv_system(void)	{ return 0; }
 static inline void uv_cpu_init(void)	{ }
 static inline void uv_system_init(void)	{ }
+static inline void uv_register_nmi_notifier(void) { }
 static inline const struct cpumask *
 uv_flush_tlb_others(const struct cpumask *cpumask, struct mm_struct *mm,
 		    unsigned long start, unsigned long end, unsigned int cpu)
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 1191ac1c9d25..9e47c06ae5ab 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -39,12 +39,6 @@
 #include <asm/x86_init.h>
 #include <asm/nmi.h>
 
-/* BMC sets a bit this MMR non-zero before sending an NMI */
-#define UVH_NMI_MMR				UVH_SCRATCH5
-#define UVH_NMI_MMR_CLEAR			(UVH_NMI_MMR + 8)
-#define UV_NMI_PENDING_MASK			(1UL << 63)
-DEFINE_PER_CPU(unsigned long, cpu_last_nmi_count);
-
 DEFINE_PER_CPU(int, x2apic_extra_bits);
 
 #define PR_DEVEL(fmt, args...)	pr_devel("%s: " fmt, __func__, args)
@@ -58,7 +52,6 @@ int uv_min_hub_revision_id;
 EXPORT_SYMBOL_GPL(uv_min_hub_revision_id);
 unsigned int uv_apicid_hibits;
 EXPORT_SYMBOL_GPL(uv_apicid_hibits);
-static DEFINE_SPINLOCK(uv_nmi_lock);
 
 static struct apic apic_x2apic_uv_x;
 
@@ -847,68 +840,6 @@ void uv_cpu_init(void)
 		set_x2apic_extra_bits(uv_hub_info->pnode);
 }
 
-/*
- * When NMI is received, print a stack trace.
- */
-int uv_handle_nmi(unsigned int reason, struct pt_regs *regs)
-{
-	unsigned long real_uv_nmi;
-	int bid;
-
-	/*
-	 * Each blade has an MMR that indicates when an NMI has been sent
-	 * to cpus on the blade. If an NMI is detected, atomically
-	 * clear the MMR and update a per-blade NMI count used to
-	 * cause each cpu on the blade to notice a new NMI.
-	 */
-	bid = uv_numa_blade_id();
-	real_uv_nmi = (uv_read_local_mmr(UVH_NMI_MMR) & UV_NMI_PENDING_MASK);
-
-	if (unlikely(real_uv_nmi)) {
-		spin_lock(&uv_blade_info[bid].nmi_lock);
-		real_uv_nmi = (uv_read_local_mmr(UVH_NMI_MMR) & UV_NMI_PENDING_MASK);
-		if (real_uv_nmi) {
-			uv_blade_info[bid].nmi_count++;
-			uv_write_local_mmr(UVH_NMI_MMR_CLEAR, UV_NMI_PENDING_MASK);
-		}
-		spin_unlock(&uv_blade_info[bid].nmi_lock);
-	}
-
-	if (likely(__get_cpu_var(cpu_last_nmi_count) == uv_blade_info[bid].nmi_count))
-		return NMI_DONE;
-
-	__get_cpu_var(cpu_last_nmi_count) = uv_blade_info[bid].nmi_count;
-
-	/*
-	 * Use a lock so only one cpu prints at a time.
-	 * This prevents intermixed output.
-	 */
-	spin_lock(&uv_nmi_lock);
-	pr_info("UV NMI stack dump cpu %u:\n", smp_processor_id());
-	dump_stack();
-	spin_unlock(&uv_nmi_lock);
-
-	return NMI_HANDLED;
-}
-
-void uv_register_nmi_notifier(void)
-{
-	if (register_nmi_handler(NMI_UNKNOWN, uv_handle_nmi, 0, "uv"))
-		printk(KERN_WARNING "UV NMI handler failed to register\n");
-}
-
-void uv_nmi_init(void)
-{
-	unsigned int value;
-
-	/*
-	 * Unmask NMI on all cpus
-	 */
-	value = apic_read(APIC_LVT1) | APIC_DM_NMI;
-	value &= ~APIC_LVT_MASKED;
-	apic_write(APIC_LVT1, value);
-}
-
 void __init uv_system_init(void)
 {
 	union uvh_rh_gam_config_mmr_u  m_n_config;
diff --git a/arch/x86/platform/uv/Makefile b/arch/x86/platform/uv/Makefile
index 6c40995fefb8..52079bebd014 100644
--- a/arch/x86/platform/uv/Makefile
+++ b/arch/x86/platform/uv/Makefile
@@ -1 +1 @@
-obj-$(CONFIG_X86_UV)		+= tlb_uv.o bios_uv.o uv_irq.o uv_sysfs.o uv_time.o
+obj-$(CONFIG_X86_UV)		+= tlb_uv.o bios_uv.o uv_irq.o uv_sysfs.o uv_time.o uv_nmi.o
diff --git a/arch/x86/platform/uv/uv_nmi.c b/arch/x86/platform/uv/uv_nmi.c
new file mode 100644
index 000000000000..37feb60618b1
--- /dev/null
+++ b/arch/x86/platform/uv/uv_nmi.c
@@ -0,0 +1,102 @@
+/*
+ * SGI NMI support routines
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ *  Copyright (c) 2009-2013 Silicon Graphics, Inc.  All Rights Reserved.
+ *  Copyright (c) Mike Travis
+ */
+
+#include <linux/cpu.h>
+#include <linux/nmi.h>
+
+#include <asm/apic.h>
+#include <asm/nmi.h>
+#include <asm/uv/uv.h>
+#include <asm/uv/uv_hub.h>
+#include <asm/uv/uv_mmrs.h>
+
+/* BMC sets a bit this MMR non-zero before sending an NMI */
+#define UVH_NMI_MMR				UVH_SCRATCH5
+#define UVH_NMI_MMR_CLEAR			(UVH_NMI_MMR + 8)
+#define UV_NMI_PENDING_MASK			(1UL << 63)
+DEFINE_PER_CPU(unsigned long, cpu_last_nmi_count);
+static DEFINE_SPINLOCK(uv_nmi_lock);
+
+/*
+ * When NMI is received, print a stack trace.
+ */
+int uv_handle_nmi(unsigned int reason, struct pt_regs *regs)
+{
+	unsigned long real_uv_nmi;
+	int bid;
+
+	/*
+	 * Each blade has an MMR that indicates when an NMI has been sent
+	 * to cpus on the blade. If an NMI is detected, atomically
+	 * clear the MMR and update a per-blade NMI count used to
+	 * cause each cpu on the blade to notice a new NMI.
+	 */
+	bid = uv_numa_blade_id();
+	real_uv_nmi = (uv_read_local_mmr(UVH_NMI_MMR) & UV_NMI_PENDING_MASK);
+
+	if (unlikely(real_uv_nmi)) {
+		spin_lock(&uv_blade_info[bid].nmi_lock);
+		real_uv_nmi = (uv_read_local_mmr(UVH_NMI_MMR) &
+				UV_NMI_PENDING_MASK);
+		if (real_uv_nmi) {
+			uv_blade_info[bid].nmi_count++;
+			uv_write_local_mmr(UVH_NMI_MMR_CLEAR,
+						UV_NMI_PENDING_MASK);
+		}
+		spin_unlock(&uv_blade_info[bid].nmi_lock);
+	}
+
+	if (likely(__get_cpu_var(cpu_last_nmi_count) ==
+			uv_blade_info[bid].nmi_count))
+		return NMI_DONE;
+
+	__get_cpu_var(cpu_last_nmi_count) = uv_blade_info[bid].nmi_count;
+
+	/*
+	 * Use a lock so only one cpu prints at a time.
+	 * This prevents intermixed output.
+	 */
+	spin_lock(&uv_nmi_lock);
+	pr_info("UV NMI stack dump cpu %u:\n", smp_processor_id());
+	dump_stack();
+	spin_unlock(&uv_nmi_lock);
+
+	return NMI_HANDLED;
+}
+
+void uv_register_nmi_notifier(void)
+{
+	if (register_nmi_handler(NMI_UNKNOWN, uv_handle_nmi, 0, "uv"))
+		pr_warn("UV NMI handler failed to register\n");
+}
+
+void uv_nmi_init(void)
+{
+	unsigned int value;
+
+	/*
+	 * Unmask NMI on all cpus
+	 */
+	value = apic_read(APIC_LVT1) | APIC_DM_NMI;
+	value &= ~APIC_LVT_MASKED;
+	apic_write(APIC_LVT1, value);
+}
+
-- 
cgit v1.2.3


From 0d12ef0c900078cc1f4e78dff2245521aa5d0c89 Mon Sep 17 00:00:00 2001
From: Mike Travis
Date: Mon, 23 Sep 2013 16:25:01 -0500
Subject: x86/UV: Update UV support for external NMI signals

The current UV NMI handler has not been updated for the changes
in the system NMI handler and the perf operations.  The UV NMI
handler reads an MMR in the UV Hub to check to see if the NMI
event was caused by the external 'system NMI' that the operator
can initiate on the System Mgmt Controller.

The problem arises when the perf tools are running, causing
millions of perf events per second on very large CPU count
systems.  Previously this was okay because the perf NMI handler
ran at a higher priority on the NMI call chain and if the NMI
was a perf event, it would stop calling other NMI handlers
remaining on the NMI call chain.

Now the system NMI handler calls all the handlers on the NMI
call chain including the UV NMI handler.  This causes the UV NMI
handler to read the MMRs at the same millions per second rate.
This can lead to significant performance loss and possible
system failures.  It also can cause thousands of 'Dazed and
Confused' messages being sent to the system console.  This
effectively makes perf tools unusable on UV systems.

To avoid this excessive overhead when perf tools are running,
this code has been optimized to minimize reading of the MMRs as
much as possible, by moving to the NMI_UNKNOWN notifier chain.
This chain is called only when all the users on the standard
NMI_LOCAL call chain have been called and none of them have
claimed this NMI.

There is an exception where the NMI_LOCAL notifier chain is
used.  When the perf tools are in use, it's possible that the UV
NMI was captured by some other NMI handler and then either
ignored or mistakenly processed as a perf event.  We set a
per_cpu ('ping') flag for those CPUs that ignored the initial
NMI, and then send them an IPI NMI signal.  The NMI_LOCAL
handler on each cpu does not need to read the MMR, but instead
checks the in memory flag indicating it was pinged.  There are
two module variables, 'ping_count' indicating how many requested
NMI events occurred, and 'ping_misses' indicating how many stray
NMI events.  These most likely are perf events so it shows the
overhead of the perf NMI interrupts and how many MMR reads were avoided.

This patch also minimizes the reads of the MMRs by having the
first cpu entering the NMI handler on each node set a per HUB
in-memory atomic value.  (Having a per HUB value avoids sending
lock traffic over NumaLink.)  Both types of UV NMIs from the SMI
layer are supported.

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Reviewed-by: Hedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/include/asm/uv/uv_hub.h   |  57 +++-
 arch/x86/include/asm/uv/uv_mmrs.h  |  31 +++
 arch/x86/kernel/apic/x2apic_uv_x.c |   1 +
 arch/x86/platform/uv/uv_nmi.c      | 553 ++++++++++++++++++++++++++++++++++---
 4 files changed, 600 insertions(+), 42 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index 2c32df95bb78..a30836c8ac4d 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -502,8 +502,8 @@ struct uv_blade_info {
 	unsigned short	nr_online_cpus;
 	unsigned short	pnode;
 	short		memory_nid;
-	spinlock_t	nmi_lock;
-	unsigned long	nmi_count;
+	spinlock_t	nmi_lock;	/* obsolete, see uv_hub_nmi */
+	unsigned long	nmi_count;	/* obsolete, see uv_hub_nmi */
 };
 extern struct uv_blade_info *uv_blade_info;
 extern short *uv_node_to_blade;
@@ -576,6 +576,59 @@ static inline int uv_num_possible_blades(void)
 	return uv_possible_blades;
 }
 
+/* Per Hub NMI support */
+extern void uv_nmi_setup(void);
+
+/* BMC sets a bit this MMR non-zero before sending an NMI */
+#define UVH_NMI_MMR		UVH_SCRATCH5
+#define UVH_NMI_MMR_CLEAR	UVH_SCRATCH5_ALIAS
+#define UVH_NMI_MMR_SHIFT	63
+#define	UVH_NMI_MMR_TYPE	"SCRATCH5"
+
+/* Newer SMM NMI handler, not present in all systems */
+#define UVH_NMI_MMRX		UVH_EVENT_OCCURRED0
+#define UVH_NMI_MMRX_CLEAR	UVH_EVENT_OCCURRED0_ALIAS
+#define UVH_NMI_MMRX_SHIFT	(is_uv1_hub() ? \
+					UV1H_EVENT_OCCURRED0_EXTIO_INT0_SHFT :\
+					UVXH_EVENT_OCCURRED0_EXTIO_INT0_SHFT)
+#define	UVH_NMI_MMRX_TYPE	"EXTIO_INT0"
+
+/* Non-zero indicates newer SMM NMI handler present */
+#define UVH_NMI_MMRX_SUPPORTED	UVH_EXTIO_INT0_BROADCAST
+
+/* Indicates to BIOS that we want to use the newer SMM NMI handler */
+#define UVH_NMI_MMRX_REQ	UVH_SCRATCH5_ALIAS_2
+#define UVH_NMI_MMRX_REQ_SHIFT	62
+
+struct uv_hub_nmi_s {
+	raw_spinlock_t	nmi_lock;
+	atomic_t	in_nmi;		/* flag this node in UV NMI IRQ */
+	atomic_t	cpu_owner;	/* last locker of this struct */
+	atomic_t	read_mmr_count;	/* count of MMR reads */
+	atomic_t	nmi_count;	/* count of true UV NMIs */
+	unsigned long	nmi_value;	/* last value read from NMI MMR */
+};
+
+struct uv_cpu_nmi_s {
+	struct uv_hub_nmi_s	*hub;
+	atomic_t		state;
+	atomic_t		pinging;
+	int			queries;
+	int			pings;
+};
+
+DECLARE_PER_CPU(struct uv_cpu_nmi_s, __uv_cpu_nmi);
+#define uv_cpu_nmi			(__get_cpu_var(__uv_cpu_nmi))
+#define uv_hub_nmi			(uv_cpu_nmi.hub)
+#define uv_cpu_nmi_per(cpu)		(per_cpu(__uv_cpu_nmi, cpu))
+#define uv_hub_nmi_per(cpu)		(uv_cpu_nmi_per(cpu).hub)
+
+/* uv_cpu_nmi_states */
+#define	UV_NMI_STATE_OUT		0
+#define	UV_NMI_STATE_IN			1
+#define	UV_NMI_STATE_DUMP		2
+#define	UV_NMI_STATE_DUMP_DONE		3
+
 /* Update SCIR state */
 static inline void uv_set_scir_bits(unsigned char value)
 {
diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h
index bd5f80e58a23..e42249bcf7e1 100644
--- a/arch/x86/include/asm/uv/uv_mmrs.h
+++ b/arch/x86/include/asm/uv/uv_mmrs.h
@@ -460,6 +460,23 @@ union uvh_event_occurred0_u {
 #define UVH_EVENT_OCCURRED0_ALIAS_32 0x5f0
 
 
+/* ========================================================================= */
+/*                         UVH_EXTIO_INT0_BROADCAST                          */
+/* ========================================================================= */
+#define UVH_EXTIO_INT0_BROADCAST 0x61448UL
+#define UVH_EXTIO_INT0_BROADCAST_32 0x3f0
+
+#define UVH_EXTIO_INT0_BROADCAST_ENABLE_SHFT		0
+#define UVH_EXTIO_INT0_BROADCAST_ENABLE_MASK		0x0000000000000001UL
+
+union uvh_extio_int0_broadcast_u {
+	unsigned long	v;
+	struct uvh_extio_int0_broadcast_s {
+		unsigned long	enable:1;			/* RW */
+		unsigned long	rsvd_1_63:63;
+	} s;
+};
+
 /* ========================================================================= */
 /*                         UVH_GR0_TLB_INT0_CONFIG                           */
 /* ========================================================================= */
@@ -2605,6 +2622,20 @@ union uvh_scratch5_u {
 	} s;
 };
 
+/* ========================================================================= */
+/*                            UVH_SCRATCH5_ALIAS                             */
+/* ========================================================================= */
+#define UVH_SCRATCH5_ALIAS 0x2d0208UL
+#define UVH_SCRATCH5_ALIAS_32 0x780
+
+
+/* ========================================================================= */
+/*                           UVH_SCRATCH5_ALIAS_2                            */
+/* ========================================================================= */
+#define UVH_SCRATCH5_ALIAS_2 0x2d0210UL
+#define UVH_SCRATCH5_ALIAS_2_32 0x788
+
+
 /* ========================================================================= */
 /*                          UVXH_EVENT_OCCURRED2                             */
 /* ========================================================================= */
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 9e47c06ae5ab..0a5a4b8ae36c 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -977,6 +977,7 @@ void __init uv_system_init(void)
 	map_mmr_high(max_pnode);
 	map_mmioh_high(min_pnode, max_pnode);
 
+	uv_nmi_setup();
 	uv_cpu_init();
 	uv_scir_register_cpu_notifier();
 	uv_register_nmi_notifier();
diff --git a/arch/x86/platform/uv/uv_nmi.c b/arch/x86/platform/uv/uv_nmi.c
index 37feb60618b1..fb02ea7d2b2d 100644
--- a/arch/x86/platform/uv/uv_nmi.c
+++ b/arch/x86/platform/uv/uv_nmi.c
@@ -20,72 +20,518 @@
  */
 
 #include <linux/cpu.h>
+#include <linux/delay.h>
+#include <linux/module.h>
 #include <linux/nmi.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
 
 #include <asm/apic.h>
+#include <asm/current.h>
+#include <asm/kdebug.h>
+#include <asm/local64.h>
 #include <asm/nmi.h>
 #include <asm/uv/uv.h>
 #include <asm/uv/uv_hub.h>
 #include <asm/uv/uv_mmrs.h>
 
-/* BMC sets a bit this MMR non-zero before sending an NMI */
-#define UVH_NMI_MMR				UVH_SCRATCH5
-#define UVH_NMI_MMR_CLEAR			(UVH_NMI_MMR + 8)
-#define UV_NMI_PENDING_MASK			(1UL << 63)
-DEFINE_PER_CPU(unsigned long, cpu_last_nmi_count);
-static DEFINE_SPINLOCK(uv_nmi_lock);
+/*
+ * UV handler for NMI
+ *
+ * Handle system-wide NMI events generated by the global 'power nmi' command.
+ *
+ * Basic operation is to field the NMI interrupt on each cpu and wait
+ * until all cpus have arrived into the nmi handler.  If some cpus do not
+ * make it into the handler, try and force them in with the IPI(NMI) signal.
+ *
+ * We also have to lessen UV Hub MMR accesses as much as possible as this
+ * disrupts the UV Hub's primary mission of directing NumaLink traffic and
+ * can cause system problems to occur.
+ *
+ * To do this we register our primary NMI notifier on the NMI_UNKNOWN
+ * chain.  This reduces the number of false NMI calls when the perf
+ * tools are running which generate an enormous number of NMIs per
+ * second (~4M/s for 1024 cpu threads).  Our secondary NMI handler is
+ * very short as it only checks that if it has been "pinged" with the
+ * IPI(NMI) signal as mentioned above, and does not read the UV Hub's MMR.
+ *
+ */
+
+static struct uv_hub_nmi_s **uv_hub_nmi_list;
+
+DEFINE_PER_CPU(struct uv_cpu_nmi_s, __uv_cpu_nmi);
+EXPORT_PER_CPU_SYMBOL_GPL(__uv_cpu_nmi);
+
+static unsigned long nmi_mmr;
+static unsigned long nmi_mmr_clear;
+static unsigned long nmi_mmr_pending;
+
+static atomic_t	uv_in_nmi;
+static atomic_t uv_nmi_cpu = ATOMIC_INIT(-1);
+static atomic_t uv_nmi_cpus_in_nmi = ATOMIC_INIT(-1);
+static atomic_t uv_nmi_slave_continue;
+static cpumask_var_t uv_nmi_cpu_mask;
+
+/* Values for uv_nmi_slave_continue */
+#define SLAVE_CLEAR	0
+#define SLAVE_CONTINUE	1
+#define SLAVE_EXIT	2
 
 /*
- * When NMI is received, print a stack trace.
+ * Default is all stack dumps go to the console and buffer.
+ * Lower level to send to log buffer only.
  */
-int uv_handle_nmi(unsigned int reason, struct pt_regs *regs)
+static int uv_nmi_loglevel = 7;
+module_param_named(dump_loglevel, uv_nmi_loglevel, int, 0644);
+
+/*
+ * The following values show statistics on how perf events are affecting
+ * this system.
+ */
+static int param_get_local64(char *buffer, const struct kernel_param *kp)
 {
-	unsigned long real_uv_nmi;
-	int bid;
+	return sprintf(buffer, "%lu\n", local64_read((local64_t *)kp->arg));
+}
 
-	/*
-	 * Each blade has an MMR that indicates when an NMI has been sent
-	 * to cpus on the blade. If an NMI is detected, atomically
-	 * clear the MMR and update a per-blade NMI count used to
-	 * cause each cpu on the blade to notice a new NMI.
-	 */
-	bid = uv_numa_blade_id();
-	real_uv_nmi = (uv_read_local_mmr(UVH_NMI_MMR) & UV_NMI_PENDING_MASK);
-
-	if (unlikely(real_uv_nmi)) {
-		spin_lock(&uv_blade_info[bid].nmi_lock);
-		real_uv_nmi = (uv_read_local_mmr(UVH_NMI_MMR) &
-				UV_NMI_PENDING_MASK);
-		if (real_uv_nmi) {
-			uv_blade_info[bid].nmi_count++;
-			uv_write_local_mmr(UVH_NMI_MMR_CLEAR,
-						UV_NMI_PENDING_MASK);
+static int param_set_local64(const char *val, const struct kernel_param *kp)
+{
+	/* clear on any write */
+	local64_set((local64_t *)kp->arg, 0);
+	return 0;
+}
+
+static struct kernel_param_ops param_ops_local64 = {
+	.get = param_get_local64,
+	.set = param_set_local64,
+};
+#define param_check_local64(name, p) __param_check(name, p, local64_t)
+
+static local64_t uv_nmi_count;
+module_param_named(nmi_count, uv_nmi_count, local64, 0644);
+
+static local64_t uv_nmi_misses;
+module_param_named(nmi_misses, uv_nmi_misses, local64, 0644);
+
+static local64_t uv_nmi_ping_count;
+module_param_named(ping_count, uv_nmi_ping_count, local64, 0644);
+
+static local64_t uv_nmi_ping_misses;
+module_param_named(ping_misses, uv_nmi_ping_misses, local64, 0644);
+
+/*
+ * Following values allow tuning for large systems under heavy loading
+ */
+static int uv_nmi_initial_delay = 100;
+module_param_named(initial_delay, uv_nmi_initial_delay, int, 0644);
+
+static int uv_nmi_slave_delay = 100;
+module_param_named(slave_delay, uv_nmi_slave_delay, int, 0644);
+
+static int uv_nmi_loop_delay = 100;
+module_param_named(loop_delay, uv_nmi_loop_delay, int, 0644);
+
+static int uv_nmi_trigger_delay = 10000;
+module_param_named(trigger_delay, uv_nmi_trigger_delay, int, 0644);
+
+static int uv_nmi_wait_count = 100;
+module_param_named(wait_count, uv_nmi_wait_count, int, 0644);
+
+static int uv_nmi_retry_count = 500;
+module_param_named(retry_count, uv_nmi_retry_count, int, 0644);
+
+/* Setup which NMI support is present in system */
+static void uv_nmi_setup_mmrs(void)
+{
+	if (uv_read_local_mmr(UVH_NMI_MMRX_SUPPORTED)) {
+		uv_write_local_mmr(UVH_NMI_MMRX_REQ,
+					1UL << UVH_NMI_MMRX_REQ_SHIFT);
+		nmi_mmr = UVH_NMI_MMRX;
+		nmi_mmr_clear = UVH_NMI_MMRX_CLEAR;
+		nmi_mmr_pending = 1UL << UVH_NMI_MMRX_SHIFT;
+		pr_info("UV: SMI NMI support: %s\n", UVH_NMI_MMRX_TYPE);
+	} else {
+		nmi_mmr = UVH_NMI_MMR;
+		nmi_mmr_clear = UVH_NMI_MMR_CLEAR;
+		nmi_mmr_pending = 1UL << UVH_NMI_MMR_SHIFT;
+		pr_info("UV: SMI NMI support: %s\n", UVH_NMI_MMR_TYPE);
+	}
+}
+
+/* Read NMI MMR and check if NMI flag was set by BMC. */
+static inline int uv_nmi_test_mmr(struct uv_hub_nmi_s *hub_nmi)
+{
+	hub_nmi->nmi_value = uv_read_local_mmr(nmi_mmr);
+	atomic_inc(&hub_nmi->read_mmr_count);
+	return !!(hub_nmi->nmi_value & nmi_mmr_pending);
+}
+
+static inline void uv_local_mmr_clear_nmi(void)
+{
+	uv_write_local_mmr(nmi_mmr_clear, nmi_mmr_pending);
+}
+
+/*
+ * If first cpu in on this hub, set hub_nmi "in_nmi" and "owner" values and
+ * return true.  If first cpu in on the system, set global "in_nmi" flag.
+ */
+static int uv_set_in_nmi(int cpu, struct uv_hub_nmi_s *hub_nmi)
+{
+	int first = atomic_add_unless(&hub_nmi->in_nmi, 1, 1);
+
+	if (first) {
+		atomic_set(&hub_nmi->cpu_owner, cpu);
+		if (atomic_add_unless(&uv_in_nmi, 1, 1))
+			atomic_set(&uv_nmi_cpu, cpu);
+
+		atomic_inc(&hub_nmi->nmi_count);
+	}
+	return first;
+}
+
+/* Check if this is a system NMI event */
+static int uv_check_nmi(struct uv_hub_nmi_s *hub_nmi)
+{
+	int cpu = smp_processor_id();
+	int nmi = 0;
+
+	local64_inc(&uv_nmi_count);
+	uv_cpu_nmi.queries++;
+
+	do {
+		nmi = atomic_read(&hub_nmi->in_nmi);
+		if (nmi)
+			break;
+
+		if (raw_spin_trylock(&hub_nmi->nmi_lock)) {
+
+			/* check hub MMR NMI flag */
+			if (uv_nmi_test_mmr(hub_nmi)) {
+				uv_set_in_nmi(cpu, hub_nmi);
+				nmi = 1;
+				break;
+			}
+
+			/* MMR NMI flag is clear */
+			raw_spin_unlock(&hub_nmi->nmi_lock);
+
+		} else {
+			/* wait a moment for the hub nmi locker to set flag */
+			cpu_relax();
+			udelay(uv_nmi_slave_delay);
+
+			/* re-check hub in_nmi flag */
+			nmi = atomic_read(&hub_nmi->in_nmi);
+			if (nmi)
+				break;
+		}
+
+		/* check if this BMC missed setting the MMR NMI flag */
+		if (!nmi) {
+			nmi = atomic_read(&uv_in_nmi);
+			if (nmi)
+				uv_set_in_nmi(cpu, hub_nmi);
+		}
+
+	} while (0);
+
+	if (!nmi)
+		local64_inc(&uv_nmi_misses);
+
+	return nmi;
+}
+
+/* Need to reset the NMI MMR register, but only once per hub. */
+static inline void uv_clear_nmi(int cpu)
+{
+	struct uv_hub_nmi_s *hub_nmi = uv_hub_nmi;
+
+	if (cpu == atomic_read(&hub_nmi->cpu_owner)) {
+		atomic_set(&hub_nmi->cpu_owner, -1);
+		atomic_set(&hub_nmi->in_nmi, 0);
+		uv_local_mmr_clear_nmi();
+		raw_spin_unlock(&hub_nmi->nmi_lock);
+	}
+}
+
+/* Print non-responding cpus */
+static void uv_nmi_nr_cpus_pr(char *fmt)
+{
+	static char cpu_list[1024];
+	int len = sizeof(cpu_list);
+	int c = cpumask_weight(uv_nmi_cpu_mask);
+	int n = cpulist_scnprintf(cpu_list, len, uv_nmi_cpu_mask);
+
+	if (n >= len-1)
+		strcpy(&cpu_list[len - 6], "...\n");
+
+	printk(fmt, c, cpu_list);
+}
+
+/* Ping non-responding cpus attemping to force them into the NMI handler */
+static void uv_nmi_nr_cpus_ping(void)
+{
+	int cpu;
+
+	for_each_cpu(cpu, uv_nmi_cpu_mask)
+		atomic_set(&uv_cpu_nmi_per(cpu).pinging, 1);
+
+	apic->send_IPI_mask(uv_nmi_cpu_mask, APIC_DM_NMI);
+}
+
+/* Clean up flags for cpus that ignored both NMI and ping */
+static void uv_nmi_cleanup_mask(void)
+{
+	int cpu;
+
+	for_each_cpu(cpu, uv_nmi_cpu_mask) {
+		atomic_set(&uv_cpu_nmi_per(cpu).pinging, 0);
+		atomic_set(&uv_cpu_nmi_per(cpu).state, UV_NMI_STATE_OUT);
+		cpumask_clear_cpu(cpu, uv_nmi_cpu_mask);
+	}
+}
+
+/* Loop waiting as cpus enter nmi handler */
+static int uv_nmi_wait_cpus(int first)
+{
+	int i, j, k, n = num_online_cpus();
+	int last_k = 0, waiting = 0;
+
+	if (first) {
+		cpumask_copy(uv_nmi_cpu_mask, cpu_online_mask);
+		k = 0;
+	} else {
+		k = n - cpumask_weight(uv_nmi_cpu_mask);
+	}
+
+	udelay(uv_nmi_initial_delay);
+	for (i = 0; i < uv_nmi_retry_count; i++) {
+		int loop_delay = uv_nmi_loop_delay;
+
+		for_each_cpu(j, uv_nmi_cpu_mask) {
+			if (atomic_read(&uv_cpu_nmi_per(j).state)) {
+				cpumask_clear_cpu(j, uv_nmi_cpu_mask);
+				if (++k >= n)
+					break;
+			}
+		}
+		if (k >= n) {		/* all in? */
+			k = n;
+			break;
+		}
+		if (last_k != k) {	/* abort if no new cpus coming in */
+			last_k = k;
+			waiting = 0;
+		} else if (++waiting > uv_nmi_wait_count)
+			break;
+
+		/* extend delay if waiting only for cpu 0 */
+		if (waiting && (n - k) == 1 &&
+		    cpumask_test_cpu(0, uv_nmi_cpu_mask))
+			loop_delay *= 100;
+
+		udelay(loop_delay);
+	}
+	atomic_set(&uv_nmi_cpus_in_nmi, k);
+	return n - k;
+}
+
+/* Wait until all slave cpus have entered UV NMI handler */
+static void uv_nmi_wait(int master)
+{
+	/* indicate this cpu is in */
+	atomic_set(&uv_cpu_nmi.state, UV_NMI_STATE_IN);
+
+	/* if not the first cpu in (the master), then we are a slave cpu */
+	if (!master)
+		return;
+
+	do {
+		/* wait for all other cpus to gather here */
+		if (!uv_nmi_wait_cpus(1))
+			break;
+
+		/* if not all made it in, send IPI NMI to them */
+		uv_nmi_nr_cpus_pr(KERN_ALERT
+			"UV: Sending NMI IPI to %d non-responding CPUs: %s\n");
+		uv_nmi_nr_cpus_ping();
+
+		/* if all cpus are in, then done */
+		if (!uv_nmi_wait_cpus(0))
+			break;
+
+		uv_nmi_nr_cpus_pr(KERN_ALERT
+			"UV: %d CPUs not in NMI loop: %s\n");
+	} while (0);
+
+	pr_alert("UV: %d of %d CPUs in NMI\n",
+		atomic_read(&uv_nmi_cpus_in_nmi), num_online_cpus());
+}
+
+/* Dump this cpu's state */
+static void uv_nmi_dump_state_cpu(int cpu, struct pt_regs *regs)
+{
+	const char *dots = " ................................. ";
+
+	printk(KERN_DEFAULT "UV:%sNMI process trace for CPU %d\n", dots, cpu);
+	show_regs(regs);
+	atomic_set(&uv_cpu_nmi.state, UV_NMI_STATE_DUMP_DONE);
+}
+
+/* Trigger a slave cpu to dump it's state */
+static void uv_nmi_trigger_dump(int cpu)
+{
+	int retry = uv_nmi_trigger_delay;
+
+	if (atomic_read(&uv_cpu_nmi_per(cpu).state) != UV_NMI_STATE_IN)
+		return;
+
+	atomic_set(&uv_cpu_nmi_per(cpu).state, UV_NMI_STATE_DUMP);
+	do {
+		cpu_relax();
+		udelay(10);
+		if (atomic_read(&uv_cpu_nmi_per(cpu).state)
+				!= UV_NMI_STATE_DUMP)
+			return;
+	} while (--retry > 0);
+
+	pr_crit("UV: CPU %d stuck in process dump function\n", cpu);
+	atomic_set(&uv_cpu_nmi_per(cpu).state, UV_NMI_STATE_DUMP_DONE);
+}
+
+/* Wait until all cpus ready to exit */
+static void uv_nmi_sync_exit(int master)
+{
+	atomic_dec(&uv_nmi_cpus_in_nmi);
+	if (master) {
+		while (atomic_read(&uv_nmi_cpus_in_nmi) > 0)
+			cpu_relax();
+		atomic_set(&uv_nmi_slave_continue, SLAVE_CLEAR);
+	} else {
+		while (atomic_read(&uv_nmi_slave_continue))
+			cpu_relax();
+	}
+}
+
+/* Walk through cpu list and dump state of each */
+static void uv_nmi_dump_state(int cpu, struct pt_regs *regs, int master)
+{
+	if (master) {
+		int tcpu;
+		int ignored = 0;
+		int saved_console_loglevel = console_loglevel;
+
+		pr_alert("UV: tracing processes for %d CPUs from CPU %d\n",
+			atomic_read(&uv_nmi_cpus_in_nmi), cpu);
+
+		console_loglevel = uv_nmi_loglevel;
+		atomic_set(&uv_nmi_slave_continue, SLAVE_EXIT);
+		for_each_online_cpu(tcpu) {
+			if (cpumask_test_cpu(tcpu, uv_nmi_cpu_mask))
+				ignored++;
+			else if (tcpu == cpu)
+				uv_nmi_dump_state_cpu(tcpu, regs);
+			else
+				uv_nmi_trigger_dump(tcpu);
 		}
-		spin_unlock(&uv_blade_info[bid].nmi_lock);
+		if (ignored)
+			printk(KERN_DEFAULT "UV: %d CPUs ignored NMI\n",
+				ignored);
+
+		console_loglevel = saved_console_loglevel;
+		pr_alert("UV: process trace complete\n");
+	} else {
+		while (!atomic_read(&uv_nmi_slave_continue))
+			cpu_relax();
+		while (atomic_read(&uv_cpu_nmi.state) != UV_NMI_STATE_DUMP)
+			cpu_relax();
+		uv_nmi_dump_state_cpu(cpu, regs);
 	}
+	uv_nmi_sync_exit(master);
+}
 
-	if (likely(__get_cpu_var(cpu_last_nmi_count) ==
-			uv_blade_info[bid].nmi_count))
+static void uv_nmi_touch_watchdogs(void)
+{
+	touch_softlockup_watchdog_sync();
+	clocksource_touch_watchdog();
+	rcu_cpu_stall_reset();
+	touch_nmi_watchdog();
+}
+
+/*
+ * UV NMI handler
+ */
+int uv_handle_nmi(unsigned int reason, struct pt_regs *regs)
+{
+	struct uv_hub_nmi_s *hub_nmi = uv_hub_nmi;
+	int cpu = smp_processor_id();
+	int master = 0;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	/* If not a UV System NMI, ignore */
+	if (!atomic_read(&uv_cpu_nmi.pinging) && !uv_check_nmi(hub_nmi)) {
+		local_irq_restore(flags);
 		return NMI_DONE;
+	}
 
-	__get_cpu_var(cpu_last_nmi_count) = uv_blade_info[bid].nmi_count;
+	/* Indicate we are the first CPU into the NMI handler */
+	master = (atomic_read(&uv_nmi_cpu) == cpu);
 
-	/*
-	 * Use a lock so only one cpu prints at a time.
-	 * This prevents intermixed output.
-	 */
-	spin_lock(&uv_nmi_lock);
-	pr_info("UV NMI stack dump cpu %u:\n", smp_processor_id());
-	dump_stack();
-	spin_unlock(&uv_nmi_lock);
+	/* Pause as all cpus enter the NMI handler */
+	uv_nmi_wait(master);
+
+	/* Dump state of each cpu */
+	uv_nmi_dump_state(cpu, regs, master);
+
+	/* Clear per_cpu "in nmi" flag */
+	atomic_set(&uv_cpu_nmi.state, UV_NMI_STATE_OUT);
+
+	/* Clear MMR NMI flag on each hub */
+	uv_clear_nmi(cpu);
+
+	/* Clear global flags */
+	if (master) {
+		if (cpumask_weight(uv_nmi_cpu_mask))
+			uv_nmi_cleanup_mask();
+		atomic_set(&uv_nmi_cpus_in_nmi, -1);
+		atomic_set(&uv_nmi_cpu, -1);
+		atomic_set(&uv_in_nmi, 0);
+	}
+
+	uv_nmi_touch_watchdogs();
+	local_irq_restore(flags);
 
 	return NMI_HANDLED;
 }
 
+/*
+ * NMI handler for pulling in CPUs when perf events are grabbing our NMI
+ */
+int uv_handle_nmi_ping(unsigned int reason, struct pt_regs *regs)
+{
+	int ret;
+
+	uv_cpu_nmi.queries++;
+	if (!atomic_read(&uv_cpu_nmi.pinging)) {
+		local64_inc(&uv_nmi_ping_misses);
+		return NMI_DONE;
+	}
+
+	uv_cpu_nmi.pings++;
+	local64_inc(&uv_nmi_ping_count);
+	ret = uv_handle_nmi(reason, regs);
+	atomic_set(&uv_cpu_nmi.pinging, 0);
+	return ret;
+}
+
 void uv_register_nmi_notifier(void)
 {
 	if (register_nmi_handler(NMI_UNKNOWN, uv_handle_nmi, 0, "uv"))
-		pr_warn("UV NMI handler failed to register\n");
+		pr_warn("UV: NMI handler failed to register\n");
+
+	if (register_nmi_handler(NMI_LOCAL, uv_handle_nmi_ping, 0, "uvping"))
+		pr_warn("UV: PING NMI handler failed to register\n");
 }
 
 void uv_nmi_init(void)
@@ -100,3 +546,30 @@ void uv_nmi_init(void)
 	apic_write(APIC_LVT1, value);
 }
 
+void uv_nmi_setup(void)
+{
+	int size = sizeof(void *) * (1 << NODES_SHIFT);
+	int cpu, nid;
+
+	/* Setup hub nmi info */
+	uv_nmi_setup_mmrs();
+	uv_hub_nmi_list = kzalloc(size, GFP_KERNEL);
+	pr_info("UV: NMI hub list @ 0x%p (%d)\n", uv_hub_nmi_list, size);
+	BUG_ON(!uv_hub_nmi_list);
+	size = sizeof(struct uv_hub_nmi_s);
+	for_each_present_cpu(cpu) {
+		nid = cpu_to_node(cpu);
+		if (uv_hub_nmi_list[nid] == NULL) {
+			uv_hub_nmi_list[nid] = kzalloc_node(size,
+							    GFP_KERNEL, nid);
+			BUG_ON(!uv_hub_nmi_list[nid]);
+			raw_spin_lock_init(&(uv_hub_nmi_list[nid]->nmi_lock));
+			atomic_set(&uv_hub_nmi_list[nid]->cpu_owner, -1);
+		}
+		uv_hub_nmi_per(cpu) = uv_hub_nmi_list[nid];
+	}
+	alloc_cpumask_var(&uv_nmi_cpu_mask, GFP_KERNEL);
+	BUG_ON(!uv_nmi_cpu_mask);
+}
+
+
-- 
cgit v1.2.3


From 3c121d9a21dc16ef030ad6ca3ebb159b5726fab9 Mon Sep 17 00:00:00 2001
From: Mike Travis
Date: Mon, 23 Sep 2013 16:25:02 -0500
Subject: x86/UV: Add summary of cpu activity to UV NMI handler

The standard NMI handler dumps the states of all the cpus.  This
includes a full register dump and stack trace.  This can be way
more information than what is needed.  This patch adds a
"summary" dump that is basically a form of the "ps" command.  It
includes the symbolic IP address as well as the command field
and basic process information.

It is enabled when the nmi action is changed to "ips".

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Reviewed-by: Hedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20130923212500.507922930@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/platform/uv/uv_nmi.c | 48 +++++++++++++++++++++++++++++++++++++++----
 1 file changed, 44 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/platform/uv/uv_nmi.c b/arch/x86/platform/uv/uv_nmi.c
index fb02ea7d2b2d..4efcde1b9d54 100644
--- a/arch/x86/platform/uv/uv_nmi.c
+++ b/arch/x86/platform/uv/uv_nmi.c
@@ -139,6 +139,19 @@ module_param_named(wait_count, uv_nmi_wait_count, int, 0644);
 static int uv_nmi_retry_count = 500;
 module_param_named(retry_count, uv_nmi_retry_count, int, 0644);
 
+/*
+ * Valid NMI Actions:
+ *  "dump"	- dump process stack for each cpu
+ *  "ips"	- dump IP info for each cpu
+ */
+static char uv_nmi_action[8] = "dump";
+module_param_string(action, uv_nmi_action, sizeof(uv_nmi_action), 0644);
+
+static inline bool uv_nmi_action_is(const char *action)
+{
+	return (strncmp(uv_nmi_action, action, strlen(action)) == 0);
+}
+
 /* Setup which NMI support is present in system */
 static void uv_nmi_setup_mmrs(void)
 {
@@ -367,13 +380,38 @@ static void uv_nmi_wait(int master)
 		atomic_read(&uv_nmi_cpus_in_nmi), num_online_cpus());
 }
 
+static void uv_nmi_dump_cpu_ip_hdr(void)
+{
+	printk(KERN_DEFAULT
+		"\nUV: %4s %6s %-32s %s   (Note: PID 0 not listed)\n",
+		"CPU", "PID", "COMMAND", "IP");
+}
+
+static void uv_nmi_dump_cpu_ip(int cpu, struct pt_regs *regs)
+{
+	printk(KERN_DEFAULT "UV: %4d %6d %-32.32s ",
+		cpu, current->pid, current->comm);
+
+	printk_address(regs->ip, 1);
+}
+
 /* Dump this cpu's state */
 static void uv_nmi_dump_state_cpu(int cpu, struct pt_regs *regs)
 {
 	const char *dots = " ................................. ";
 
-	printk(KERN_DEFAULT "UV:%sNMI process trace for CPU %d\n", dots, cpu);
-	show_regs(regs);
+	if (uv_nmi_action_is("ips")) {
+		if (cpu == 0)
+			uv_nmi_dump_cpu_ip_hdr();
+
+		if (current->pid != 0)
+			uv_nmi_dump_cpu_ip(cpu, regs);
+
+	} else if (uv_nmi_action_is("dump")) {
+		printk(KERN_DEFAULT
+			"UV:%sNMI process trace for CPU %d\n", dots, cpu);
+		show_regs(regs);
+	}
 	atomic_set(&uv_cpu_nmi.state, UV_NMI_STATE_DUMP_DONE);
 }
 
@@ -420,7 +458,8 @@ static void uv_nmi_dump_state(int cpu, struct pt_regs *regs, int master)
 		int ignored = 0;
 		int saved_console_loglevel = console_loglevel;
 
-		pr_alert("UV: tracing processes for %d CPUs from CPU %d\n",
+		pr_alert("UV: tracing %s for %d CPUs from CPU %d\n",
+			uv_nmi_action_is("ips") ? "IPs" : "processes",
 			atomic_read(&uv_nmi_cpus_in_nmi), cpu);
 
 		console_loglevel = uv_nmi_loglevel;
@@ -482,7 +521,8 @@ int uv_handle_nmi(unsigned int reason, struct pt_regs *regs)
 	uv_nmi_wait(master);
 
 	/* Dump state of each cpu */
-	uv_nmi_dump_state(cpu, regs, master);
+	if (uv_nmi_action_is("ips") || uv_nmi_action_is("dump"))
+		uv_nmi_dump_state(cpu, regs, master);
 
 	/* Clear per_cpu "in nmi" flag */
 	atomic_set(&uv_cpu_nmi.state, UV_NMI_STATE_OUT);
-- 
cgit v1.2.3


From 12ba6c990fab50fe568f3ad8715e81e356552428 Mon Sep 17 00:00:00 2001
From: Mike Travis
Date: Mon, 23 Sep 2013 16:25:03 -0500
Subject: x86/UV: Add kdump to UV NMI handler

If a system has hung and it no longer responds to external
events, this patch adds the capability of doing a standard kdump
and system reboot then triggered by the system NMI command.

It is enabled when the nmi action is changed to "kdump" and the
kernel is built with CONFIG_KEXEC enabled.

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Reviewed-by: Hedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20130923212500.660567460@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/platform/uv/uv_nmi.c | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/platform/uv/uv_nmi.c b/arch/x86/platform/uv/uv_nmi.c
index 4efcde1b9d54..2579fbd6b95c 100644
--- a/arch/x86/platform/uv/uv_nmi.c
+++ b/arch/x86/platform/uv/uv_nmi.c
@@ -21,6 +21,7 @@
 
 #include <linux/cpu.h>
 #include <linux/delay.h>
+#include <linux/kexec.h>
 #include <linux/module.h>
 #include <linux/nmi.h>
 #include <linux/sched.h>
@@ -70,6 +71,7 @@ static atomic_t	uv_in_nmi;
 static atomic_t uv_nmi_cpu = ATOMIC_INIT(-1);
 static atomic_t uv_nmi_cpus_in_nmi = ATOMIC_INIT(-1);
 static atomic_t uv_nmi_slave_continue;
+static atomic_t uv_nmi_kexec_failed;
 static cpumask_var_t uv_nmi_cpu_mask;
 
 /* Values for uv_nmi_slave_continue */
@@ -143,6 +145,7 @@ module_param_named(retry_count, uv_nmi_retry_count, int, 0644);
  * Valid NMI Actions:
  *  "dump"	- dump process stack for each cpu
  *  "ips"	- dump IP info for each cpu
+ *  "kdump"	- do crash dump
  */
 static char uv_nmi_action[8] = "dump";
 module_param_string(action, uv_nmi_action, sizeof(uv_nmi_action), 0644);
@@ -496,6 +499,40 @@ static void uv_nmi_touch_watchdogs(void)
 	touch_nmi_watchdog();
 }
 
+#if defined(CONFIG_KEXEC)
+static void uv_nmi_kdump(int cpu, int master, struct pt_regs *regs)
+{
+	/* Call crash to dump system state */
+	if (master) {
+		pr_emerg("UV: NMI executing crash_kexec on CPU%d\n", cpu);
+		crash_kexec(regs);
+
+		pr_emerg("UV: crash_kexec unexpectedly returned, ");
+		if (!kexec_crash_image) {
+			pr_cont("crash kernel not loaded\n");
+			atomic_set(&uv_nmi_kexec_failed, 1);
+			uv_nmi_sync_exit(1);
+			return;
+		}
+		pr_cont("kexec busy, stalling cpus while waiting\n");
+	}
+
+	/* If crash exec fails the slaves should return, otherwise stall */
+	while (atomic_read(&uv_nmi_kexec_failed) == 0)
+		mdelay(10);
+
+	/* Crash kernel most likely not loaded, return in an orderly fashion */
+	uv_nmi_sync_exit(0);
+}
+
+#else /* !CONFIG_KEXEC */
+static inline void uv_nmi_kdump(int cpu, int master, struct pt_regs *regs)
+{
+	if (master)
+		pr_err("UV: NMI kdump: KEXEC not supported in this kernel\n");
+}
+#endif /* !CONFIG_KEXEC */
+
 /*
  * UV NMI handler
  */
@@ -517,6 +554,10 @@ int uv_handle_nmi(unsigned int reason, struct pt_regs *regs)
 	/* Indicate we are the first CPU into the NMI handler */
 	master = (atomic_read(&uv_nmi_cpu) == cpu);
 
+	/* If NMI action is "kdump", then attempt to do it */
+	if (uv_nmi_action_is("kdump"))
+		uv_nmi_kdump(cpu, master, regs);
+
 	/* Pause as all cpus enter the NMI handler */
 	uv_nmi_wait(master);
 
-- 
cgit v1.2.3


From 8eba18428ac926f436064ac281e76d36d51bd631 Mon Sep 17 00:00:00 2001
From: Mike Travis
Date: Mon, 23 Sep 2013 16:25:06 -0500
Subject: x86/UV: Add uvtrace support

This patch adds support for the uvtrace module by providing a
skeleton call to the registered trace function.  It also
provides another separate 'NMI' tracer that is triggered by the
system wide 'power nmi' command.

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Reviewed-by: Hedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20130923212501.185052551@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/include/asm/uv/uv.h  |  8 ++++++++
 arch/x86/platform/uv/uv_nmi.c | 13 ++++++++++++-
 2 files changed, 20 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uv/uv.h b/arch/x86/include/asm/uv/uv.h
index 6b964a0b86d1..8b1283daa332 100644
--- a/arch/x86/include/asm/uv/uv.h
+++ b/arch/x86/include/asm/uv/uv.h
@@ -14,6 +14,13 @@ extern void uv_cpu_init(void);
 extern void uv_nmi_init(void);
 extern void uv_register_nmi_notifier(void);
 extern void uv_system_init(void);
+extern void (*uv_trace_nmi_func)(unsigned int reason, struct pt_regs *regs);
+extern void (*uv_trace_func)(const char *f, const int l, const char *fmt, ...);
+#define uv_trace(fmt, ...)						\
+do {									\
+	if (unlikely(uv_trace_func))					\
+		(uv_trace_func)(__func__, __LINE__, fmt, ##__VA_ARGS__);\
+} while (0)
 extern const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 						 struct mm_struct *mm,
 						 unsigned long start,
@@ -26,6 +33,7 @@ static inline enum uv_system_type get_uv_system_type(void) { return UV_NONE; }
 static inline int is_uv_system(void)	{ return 0; }
 static inline void uv_cpu_init(void)	{ }
 static inline void uv_system_init(void)	{ }
+static inline void uv_trace(void *fmt, ...)	{ }
 static inline void uv_register_nmi_notifier(void) { }
 static inline const struct cpumask *
 uv_flush_tlb_others(const struct cpumask *cpumask, struct mm_struct *mm,
diff --git a/arch/x86/platform/uv/uv_nmi.c b/arch/x86/platform/uv/uv_nmi.c
index 2579fbd6b95c..c171ca533156 100644
--- a/arch/x86/platform/uv/uv_nmi.c
+++ b/arch/x86/platform/uv/uv_nmi.c
@@ -1,5 +1,5 @@
 /*
- * SGI NMI support routines
+ * SGI NMI/TRACE support routines
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -36,6 +36,13 @@
 #include <asm/uv/uv_hub.h>
 #include <asm/uv/uv_mmrs.h>
 
+void (*uv_trace_func)(const char *f, const int l, const char *fmt, ...);
+EXPORT_SYMBOL(uv_trace_func);
+
+void (*uv_trace_nmi_func)(unsigned int reason, struct pt_regs *regs);
+EXPORT_SYMBOL(uv_trace_nmi_func);
+
+
 /*
  * UV handler for NMI
  *
@@ -551,6 +558,10 @@ int uv_handle_nmi(unsigned int reason, struct pt_regs *regs)
 		return NMI_DONE;
 	}
 
+	/* Call possible NMI trace function */
+	if (unlikely(uv_trace_nmi_func))
+		(uv_trace_nmi_func)(reason, regs);
+
 	/* Indicate we are the first CPU into the NMI handler */
 	master = (atomic_read(&uv_nmi_cpu) == cpu);
 
-- 
cgit v1.2.3


From 8a1f4653f27ffd5d61088cf6b95c39bb13bf6132 Mon Sep 17 00:00:00 2001
From: Ingo Molnar
Date: Tue, 24 Sep 2013 09:52:40 +0200
Subject: x86/UV: Check for alloc_cpumask_var() failures properly in
 uv_nmi_setup()

GCC warned about:

   arch/x86/platform/uv/uv_nmi.c: In function ‘uv_nmi_setup’:
   arch/x86/platform/uv/uv_nmi.c:664:2: warning: the address of ‘uv_nmi_cpu_mask’ will always evaluate as ‘true’

The reason is this code:

        alloc_cpumask_var(&uv_nmi_cpu_mask, GFP_KERNEL);
        BUG_ON(!uv_nmi_cpu_mask);

which is not the way to check for alloc_cpumask_var() failures - its
return code should be checked instead.

Cc: Mike Travis <travis@sgi.com>
Link: http://lkml.kernel.org/n/tip-2pXRemsjupmvonbpmmnzleo1@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/platform/uv/uv_nmi.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/platform/uv/uv_nmi.c b/arch/x86/platform/uv/uv_nmi.c
index c171ca533156..9126dfb6dbfc 100644
--- a/arch/x86/platform/uv/uv_nmi.c
+++ b/arch/x86/platform/uv/uv_nmi.c
@@ -660,8 +660,7 @@ void uv_nmi_setup(void)
 		}
 		uv_hub_nmi_per(cpu) = uv_hub_nmi_list[nid];
 	}
-	alloc_cpumask_var(&uv_nmi_cpu_mask, GFP_KERNEL);
-	BUG_ON(!uv_nmi_cpu_mask);
+	BUG_ON(!alloc_cpumask_var(&uv_nmi_cpu_mask, GFP_KERNEL));
 }
 
 
-- 
cgit v1.2.3


From 4172fe2f8a479e2237459918edc83b027efa8808 Mon Sep 17 00:00:00 2001
From: Roy Franz
Date: Sun, 22 Sep 2013 15:45:25 -0700
Subject: EFI stub documentation updates

Move efi-stub.txt out of x86 directory and into common directory
in preparation for adding ARM EFI stub support.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 Documentation/efi-stub.txt     | 65 ++++++++++++++++++++++++++++++++++++++++++
 Documentation/x86/efi-stub.txt | 65 ------------------------------------------
 arch/x86/Kconfig               |  2 +-
 3 files changed, 66 insertions(+), 66 deletions(-)
 create mode 100644 Documentation/efi-stub.txt
 delete mode 100644 Documentation/x86/efi-stub.txt

(limited to 'arch')

diff --git a/Documentation/efi-stub.txt b/Documentation/efi-stub.txt
new file mode 100644
index 000000000000..44e6bb6ead10
--- /dev/null
+++ b/Documentation/efi-stub.txt
@@ -0,0 +1,65 @@
+			  The EFI Boot Stub
+		     ---------------------------
+
+On the x86 platform, a bzImage can masquerade as a PE/COFF image,
+thereby convincing EFI firmware loaders to load it as an EFI
+executable. The code that modifies the bzImage header, along with the
+EFI-specific entry point that the firmware loader jumps to are
+collectively known as the "EFI boot stub", and live in
+arch/x86/boot/header.S and arch/x86/boot/compressed/eboot.c,
+respectively.
+
+By using the EFI boot stub it's possible to boot a Linux kernel
+without the use of a conventional EFI boot loader, such as grub or
+elilo. Since the EFI boot stub performs the jobs of a boot loader, in
+a certain sense it *IS* the boot loader.
+
+The EFI boot stub is enabled with the CONFIG_EFI_STUB kernel option.
+
+
+**** How to install bzImage.efi
+
+The bzImage located in arch/x86/boot/bzImage must be copied to the EFI
+System Partiion (ESP) and renamed with the extension ".efi". Without
+the extension the EFI firmware loader will refuse to execute it. It's
+not possible to execute bzImage.efi from the usual Linux file systems
+because EFI firmware doesn't have support for them.
+
+
+**** Passing kernel parameters from the EFI shell
+
+Arguments to the kernel can be passed after bzImage.efi, e.g.
+
+	fs0:> bzImage.efi console=ttyS0 root=/dev/sda4
+
+
+**** The "initrd=" option
+
+Like most boot loaders, the EFI stub allows the user to specify
+multiple initrd files using the "initrd=" option. This is the only EFI
+stub-specific command line parameter, everything else is passed to the
+kernel when it boots.
+
+The path to the initrd file must be an absolute path from the
+beginning of the ESP, relative path names do not work. Also, the path
+is an EFI-style path and directory elements must be separated with
+backslashes (\). For example, given the following directory layout,
+
+fs0:>
+	Kernels\
+			bzImage.efi
+			initrd-large.img
+
+	Ramdisks\
+			initrd-small.img
+			initrd-medium.img
+
+to boot with the initrd-large.img file if the current working
+directory is fs0:\Kernels, the following command must be used,
+
+	fs0:\Kernels> bzImage.efi initrd=\Kernels\initrd-large.img
+
+Notice how bzImage.efi can be specified with a relative path. That's
+because the image we're executing is interpreted by the EFI shell,
+which understands relative paths, whereas the rest of the command line
+is passed to bzImage.efi.
diff --git a/Documentation/x86/efi-stub.txt b/Documentation/x86/efi-stub.txt
deleted file mode 100644
index 44e6bb6ead10..000000000000
--- a/Documentation/x86/efi-stub.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-			  The EFI Boot Stub
-		     ---------------------------
-
-On the x86 platform, a bzImage can masquerade as a PE/COFF image,
-thereby convincing EFI firmware loaders to load it as an EFI
-executable. The code that modifies the bzImage header, along with the
-EFI-specific entry point that the firmware loader jumps to are
-collectively known as the "EFI boot stub", and live in
-arch/x86/boot/header.S and arch/x86/boot/compressed/eboot.c,
-respectively.
-
-By using the EFI boot stub it's possible to boot a Linux kernel
-without the use of a conventional EFI boot loader, such as grub or
-elilo. Since the EFI boot stub performs the jobs of a boot loader, in
-a certain sense it *IS* the boot loader.
-
-The EFI boot stub is enabled with the CONFIG_EFI_STUB kernel option.
-
-
-**** How to install bzImage.efi
-
-The bzImage located in arch/x86/boot/bzImage must be copied to the EFI
-System Partiion (ESP) and renamed with the extension ".efi". Without
-the extension the EFI firmware loader will refuse to execute it. It's
-not possible to execute bzImage.efi from the usual Linux file systems
-because EFI firmware doesn't have support for them.
-
-
-**** Passing kernel parameters from the EFI shell
-
-Arguments to the kernel can be passed after bzImage.efi, e.g.
-
-	fs0:> bzImage.efi console=ttyS0 root=/dev/sda4
-
-
-**** The "initrd=" option
-
-Like most boot loaders, the EFI stub allows the user to specify
-multiple initrd files using the "initrd=" option. This is the only EFI
-stub-specific command line parameter, everything else is passed to the
-kernel when it boots.
-
-The path to the initrd file must be an absolute path from the
-beginning of the ESP, relative path names do not work. Also, the path
-is an EFI-style path and directory elements must be separated with
-backslashes (\). For example, given the following directory layout,
-
-fs0:>
-	Kernels\
-			bzImage.efi
-			initrd-large.img
-
-	Ramdisks\
-			initrd-small.img
-			initrd-medium.img
-
-to boot with the initrd-large.img file if the current working
-directory is fs0:\Kernels, the following command must be used,
-
-	fs0:\Kernels> bzImage.efi initrd=\Kernels\initrd-large.img
-
-Notice how bzImage.efi can be specified with a relative path. That's
-because the image we're executing is interpreted by the EFI shell,
-which understands relative paths, whereas the rest of the command line
-is passed to bzImage.efi.
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index b32ebf92b0ce..ec65b51af959 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1579,7 +1579,7 @@ config EFI_STUB
           This kernel feature allows a bzImage to be loaded directly
 	  by EFI firmware without the use of a bootloader.
 
-	  See Documentation/x86/efi-stub.txt for more information.
+	  See Documentation/efi-stub.txt for more information.
 
 config SECCOMP
 	def_bool y
-- 
cgit v1.2.3


From ed37ddffe201bfad7be3c45bc08bd65b5298adca Mon Sep 17 00:00:00 2001
From: Roy Franz
Date: Sun, 22 Sep 2013 15:45:26 -0700
Subject: efi: Add proper definitions for some EFI function pointers.

The x86/AMD64 EFI stubs must use a call wrapper to convert between
the Linux and EFI ABIs, so void pointers are sufficient.  For ARM,
the ABIs are compatible, so we can directly invoke the function
pointers.  The functions that are used by the ARM stub are updated
to match the EFI definitions.
Also add some EFI types used by EFI functions.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/x86/boot/compressed/eboot.h |  8 -------
 include/linux/efi.h              | 50 +++++++++++++++++++++++++++-------------
 2 files changed, 34 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/compressed/eboot.h b/arch/x86/boot/compressed/eboot.h
index e5b0a8f91c5f..02265107cce3 100644
--- a/arch/x86/boot/compressed/eboot.h
+++ b/arch/x86/boot/compressed/eboot.h
@@ -10,8 +10,6 @@
 #define SEG_GRANULARITY_4KB	(1 << 0)
 
 #define DESC_TYPE_CODE_DATA	(1 << 0)
-
-#define EFI_PAGE_SIZE		(1UL << EFI_PAGE_SHIFT)
 #define EFI_READ_CHUNK_SIZE	(1024 * 1024)
 
 #define EFI_CONSOLE_OUT_DEVICE_GUID    \
@@ -62,10 +60,4 @@ struct efi_uga_draw_protocol {
 	void *blt;
 };
 
-struct efi_simple_text_output_protocol {
-	void *reset;
-	void *output_string;
-	void *test_string;
-};
-
 #endif /* BOOT_COMPRESSED_EBOOT_H */
diff --git a/include/linux/efi.h b/include/linux/efi.h
index c084b6d942c3..bc5687d0f315 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -39,6 +39,8 @@
 typedef unsigned long efi_status_t;
 typedef u8 efi_bool_t;
 typedef u16 efi_char16_t;		/* UNICODE character */
+typedef u64 efi_physical_addr_t;
+typedef void *efi_handle_t;
 
 
 typedef struct {
@@ -96,6 +98,7 @@ typedef	struct {
 #define EFI_MEMORY_DESCRIPTOR_VERSION	1
 
 #define EFI_PAGE_SHIFT		12
+#define EFI_PAGE_SIZE		(1UL << EFI_PAGE_SHIFT)
 
 typedef struct {
 	u32 type;
@@ -157,11 +160,13 @@ typedef struct {
 	efi_table_hdr_t hdr;
 	void *raise_tpl;
 	void *restore_tpl;
-	void *allocate_pages;
-	void *free_pages;
-	void *get_memory_map;
-	void *allocate_pool;
-	void *free_pool;
+	efi_status_t (*allocate_pages)(int, int, unsigned long,
+				       efi_physical_addr_t *);
+	efi_status_t (*free_pages)(efi_physical_addr_t, unsigned long);
+	efi_status_t (*get_memory_map)(unsigned long *, void *, unsigned long *,
+				       unsigned long *, u32 *);
+	efi_status_t (*allocate_pool)(int, unsigned long, void **);
+	efi_status_t (*free_pool)(void *);
 	void *create_event;
 	void *set_timer;
 	void *wait_for_event;
@@ -171,7 +176,7 @@ typedef struct {
 	void *install_protocol_interface;
 	void *reinstall_protocol_interface;
 	void *uninstall_protocol_interface;
-	void *handle_protocol;
+	efi_status_t (*handle_protocol)(efi_handle_t, efi_guid_t *, void **);
 	void *__reserved;
 	void *register_protocol_notify;
 	void *locate_handle;
@@ -181,7 +186,7 @@ typedef struct {
 	void *start_image;
 	void *exit;
 	void *unload_image;
-	void *exit_boot_services;
+	efi_status_t (*exit_boot_services)(efi_handle_t, unsigned long);
 	void *get_next_monotonic_count;
 	void *stall;
 	void *set_watchdog_timer;
@@ -494,10 +499,6 @@ typedef struct {
 	unsigned long unload;
 } efi_loaded_image_t;
 
-typedef struct {
-	u64 revision;
-	void *open_volume;
-} efi_file_io_interface_t;
 
 typedef struct {
 	u64 size;
@@ -510,20 +511,30 @@ typedef struct {
 	efi_char16_t filename[1];
 } efi_file_info_t;
 
-typedef struct {
+typedef struct _efi_file_handle {
 	u64 revision;
-	void *open;
-	void *close;
+	efi_status_t (*open)(struct _efi_file_handle *,
+			     struct _efi_file_handle **,
+			     efi_char16_t *, u64, u64);
+	efi_status_t (*close)(struct _efi_file_handle *);
 	void *delete;
-	void *read;
+	efi_status_t (*read)(struct _efi_file_handle *, unsigned long *,
+			     void *);
 	void *write;
 	void *get_position;
 	void *set_position;
-	void *get_info;
+	efi_status_t (*get_info)(struct _efi_file_handle *, efi_guid_t *,
+			unsigned long *, void *);
 	void *set_info;
 	void *flush;
 } efi_file_handle_t;
 
+typedef struct _efi_file_io_interface {
+	u64 revision;
+	int (*open_volume)(struct _efi_file_io_interface *,
+			   efi_file_handle_t **);
+} efi_file_io_interface_t;
+
 #define EFI_FILE_MODE_READ	0x0000000000000001
 #define EFI_FILE_MODE_WRITE	0x0000000000000002
 #define EFI_FILE_MODE_CREATE	0x8000000000000000
@@ -792,6 +803,13 @@ struct efivar_entry {
 	struct kobject kobj;
 };
 
+
+struct efi_simple_text_output_protocol {
+	void *reset;
+	efi_status_t (*output_string)(void *, void *);
+	void *test_string;
+};
+
 extern struct list_head efivar_sysfs_list;
 
 static inline void
-- 
cgit v1.2.3


From 7721da4c1ebf96ff815987011c1a0edef596b50a Mon Sep 17 00:00:00 2001
From: Roy Franz
Date: Sun, 22 Sep 2013 15:45:27 -0700
Subject: efi: Move common EFI stub code from x86 arch code to common location

No code changes made, just moving functions and #define from x86 arch
directory to common location.  Code is shared using #include, similar
to how decompression code is shared among architectures.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/x86/boot/compressed/eboot.c       | 442 +------------------------------
 arch/x86/boot/compressed/eboot.h       |   1 -
 drivers/firmware/efi/efi-stub-helper.c | 463 +++++++++++++++++++++++++++++++++
 3 files changed, 464 insertions(+), 442 deletions(-)
 create mode 100644 drivers/firmware/efi/efi-stub-helper.c

(limited to 'arch')

diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index b7388a425f09..ab0eefcc5123 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -19,214 +19,10 @@
 
 static efi_system_table_t *sys_table;
 
-static void efi_char16_printk(efi_char16_t *str)
-{
-	struct efi_simple_text_output_protocol *out;
-
-	out = (struct efi_simple_text_output_protocol *)sys_table->con_out;
-	efi_call_phys2(out->output_string, out, str);
-}
-
-static void efi_printk(char *str)
-{
-	char *s8;
-
-	for (s8 = str; *s8; s8++) {
-		efi_char16_t ch[2] = { 0 };
-
-		ch[0] = *s8;
-		if (*s8 == '\n') {
-			efi_char16_t nl[2] = { '\r', 0 };
-			efi_char16_printk(nl);
-		}
-
-		efi_char16_printk(ch);
-	}
-}
-
-static efi_status_t __get_map(efi_memory_desc_t **map, unsigned long *map_size,
-			      unsigned long *desc_size)
-{
-	efi_memory_desc_t *m = NULL;
-	efi_status_t status;
-	unsigned long key;
-	u32 desc_version;
-
-	*map_size = sizeof(*m) * 32;
-again:
-	/*
-	 * Add an additional efi_memory_desc_t because we're doing an
-	 * allocation which may be in a new descriptor region.
-	 */
-	*map_size += sizeof(*m);
-	status = efi_call_phys3(sys_table->boottime->allocate_pool,
-				EFI_LOADER_DATA, *map_size, (void **)&m);
-	if (status != EFI_SUCCESS)
-		goto fail;
-
-	status = efi_call_phys5(sys_table->boottime->get_memory_map, map_size,
-				m, &key, desc_size, &desc_version);
-	if (status == EFI_BUFFER_TOO_SMALL) {
-		efi_call_phys1(sys_table->boottime->free_pool, m);
-		goto again;
-	}
-
-	if (status != EFI_SUCCESS)
-		efi_call_phys1(sys_table->boottime->free_pool, m);
-
-fail:
-	*map = m;
-	return status;
-}
-
-/*
- * Allocate at the highest possible address that is not above 'max'.
- */
-static efi_status_t high_alloc(unsigned long size, unsigned long align,
-			      unsigned long *addr, unsigned long max)
-{
-	unsigned long map_size, desc_size;
-	efi_memory_desc_t *map;
-	efi_status_t status;
-	unsigned long nr_pages;
-	u64 max_addr = 0;
-	int i;
-
-	status = __get_map(&map, &map_size, &desc_size);
-	if (status != EFI_SUCCESS)
-		goto fail;
-
-	nr_pages = round_up(size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
-again:
-	for (i = 0; i < map_size / desc_size; i++) {
-		efi_memory_desc_t *desc;
-		unsigned long m = (unsigned long)map;
-		u64 start, end;
-
-		desc = (efi_memory_desc_t *)(m + (i * desc_size));
-		if (desc->type != EFI_CONVENTIONAL_MEMORY)
-			continue;
-
-		if (desc->num_pages < nr_pages)
-			continue;
 
-		start = desc->phys_addr;
-		end = start + desc->num_pages * (1UL << EFI_PAGE_SHIFT);
+#include "../../../../drivers/firmware/efi/efi-stub-helper.c"
 
-		if ((start + size) > end || (start + size) > max)
-			continue;
-
-		if (end - size > max)
-			end = max;
-
-		if (round_down(end - size, align) < start)
-			continue;
-
-		start = round_down(end - size, align);
-
-		/*
-		 * Don't allocate at 0x0. It will confuse code that
-		 * checks pointers against NULL.
-		 */
-		if (start == 0x0)
-			continue;
-
-		if (start > max_addr)
-			max_addr = start;
-	}
-
-	if (!max_addr)
-		status = EFI_NOT_FOUND;
-	else {
-		status = efi_call_phys4(sys_table->boottime->allocate_pages,
-					EFI_ALLOCATE_ADDRESS, EFI_LOADER_DATA,
-					nr_pages, &max_addr);
-		if (status != EFI_SUCCESS) {
-			max = max_addr;
-			max_addr = 0;
-			goto again;
-		}
-
-		*addr = max_addr;
-	}
-
-free_pool:
-	efi_call_phys1(sys_table->boottime->free_pool, map);
-
-fail:
-	return status;
-}
-
-/*
- * Allocate at the lowest possible address.
- */
-static efi_status_t low_alloc(unsigned long size, unsigned long align,
-			      unsigned long *addr)
-{
-	unsigned long map_size, desc_size;
-	efi_memory_desc_t *map;
-	efi_status_t status;
-	unsigned long nr_pages;
-	int i;
-
-	status = __get_map(&map, &map_size, &desc_size);
-	if (status != EFI_SUCCESS)
-		goto fail;
-
-	nr_pages = round_up(size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
-	for (i = 0; i < map_size / desc_size; i++) {
-		efi_memory_desc_t *desc;
-		unsigned long m = (unsigned long)map;
-		u64 start, end;
-
-		desc = (efi_memory_desc_t *)(m + (i * desc_size));
-
-		if (desc->type != EFI_CONVENTIONAL_MEMORY)
-			continue;
-
-		if (desc->num_pages < nr_pages)
-			continue;
-
-		start = desc->phys_addr;
-		end = start + desc->num_pages * (1UL << EFI_PAGE_SHIFT);
-
-		/*
-		 * Don't allocate at 0x0. It will confuse code that
-		 * checks pointers against NULL. Skip the first 8
-		 * bytes so we start at a nice even number.
-		 */
-		if (start == 0x0)
-			start += 8;
-
-		start = round_up(start, align);
-		if ((start + size) > end)
-			continue;
-
-		status = efi_call_phys4(sys_table->boottime->allocate_pages,
-					EFI_ALLOCATE_ADDRESS, EFI_LOADER_DATA,
-					nr_pages, &start);
-		if (status == EFI_SUCCESS) {
-			*addr = start;
-			break;
-		}
-	}
 
-	if (i == map_size / desc_size)
-		status = EFI_NOT_FOUND;
-
-free_pool:
-	efi_call_phys1(sys_table->boottime->free_pool, map);
-fail:
-	return status;
-}
-
-static void low_free(unsigned long size, unsigned long addr)
-{
-	unsigned long nr_pages;
-
-	nr_pages = round_up(size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
-	efi_call_phys2(sys_table->boottime->free_pages, addr, nr_pages);
-}
 
 static void find_bits(unsigned long mask, u8 *pos, u8 *size)
 {
@@ -624,242 +420,6 @@ void setup_graphics(struct boot_params *boot_params)
 	}
 }
 
-struct initrd {
-	efi_file_handle_t *handle;
-	u64 size;
-};
-
-/*
- * Check the cmdline for a LILO-style initrd= arguments.
- *
- * We only support loading an initrd from the same filesystem as the
- * kernel image.
- */
-static efi_status_t handle_ramdisks(efi_loaded_image_t *image,
-				    struct setup_header *hdr)
-{
-	struct initrd *initrds;
-	unsigned long initrd_addr;
-	efi_guid_t fs_proto = EFI_FILE_SYSTEM_GUID;
-	u64 initrd_total;
-	efi_file_io_interface_t *io;
-	efi_file_handle_t *fh;
-	efi_status_t status;
-	int nr_initrds;
-	char *str;
-	int i, j, k;
-
-	initrd_addr = 0;
-	initrd_total = 0;
-
-	str = (char *)(unsigned long)hdr->cmd_line_ptr;
-
-	j = 0;			/* See close_handles */
-
-	if (!str || !*str)
-		return EFI_SUCCESS;
-
-	for (nr_initrds = 0; *str; nr_initrds++) {
-		str = strstr(str, "initrd=");
-		if (!str)
-			break;
-
-		str += 7;
-
-		/* Skip any leading slashes */
-		while (*str == '/' || *str == '\\')
-			str++;
-
-		while (*str && *str != ' ' && *str != '\n')
-			str++;
-	}
-
-	if (!nr_initrds)
-		return EFI_SUCCESS;
-
-	status = efi_call_phys3(sys_table->boottime->allocate_pool,
-				EFI_LOADER_DATA,
-				nr_initrds * sizeof(*initrds),
-				&initrds);
-	if (status != EFI_SUCCESS) {
-		efi_printk("Failed to alloc mem for initrds\n");
-		goto fail;
-	}
-
-	str = (char *)(unsigned long)hdr->cmd_line_ptr;
-	for (i = 0; i < nr_initrds; i++) {
-		struct initrd *initrd;
-		efi_file_handle_t *h;
-		efi_file_info_t *info;
-		efi_char16_t filename_16[256];
-		unsigned long info_sz;
-		efi_guid_t info_guid = EFI_FILE_INFO_ID;
-		efi_char16_t *p;
-		u64 file_sz;
-
-		str = strstr(str, "initrd=");
-		if (!str)
-			break;
-
-		str += 7;
-
-		initrd = &initrds[i];
-		p = filename_16;
-
-		/* Skip any leading slashes */
-		while (*str == '/' || *str == '\\')
-			str++;
-
-		while (*str && *str != ' ' && *str != '\n') {
-			if ((u8 *)p >= (u8 *)filename_16 + sizeof(filename_16))
-				break;
-
-			if (*str == '/') {
-				*p++ = '\\';
-				*str++;
-			} else {
-				*p++ = *str++;
-			}
-		}
-
-		*p = '\0';
-
-		/* Only open the volume once. */
-		if (!i) {
-			efi_boot_services_t *boottime;
-
-			boottime = sys_table->boottime;
-
-			status = efi_call_phys3(boottime->handle_protocol,
-					image->device_handle, &fs_proto, &io);
-			if (status != EFI_SUCCESS) {
-				efi_printk("Failed to handle fs_proto\n");
-				goto free_initrds;
-			}
-
-			status = efi_call_phys2(io->open_volume, io, &fh);
-			if (status != EFI_SUCCESS) {
-				efi_printk("Failed to open volume\n");
-				goto free_initrds;
-			}
-		}
-
-		status = efi_call_phys5(fh->open, fh, &h, filename_16,
-					EFI_FILE_MODE_READ, (u64)0);
-		if (status != EFI_SUCCESS) {
-			efi_printk("Failed to open initrd file: ");
-			efi_char16_printk(filename_16);
-			efi_printk("\n");
-			goto close_handles;
-		}
-
-		initrd->handle = h;
-
-		info_sz = 0;
-		status = efi_call_phys4(h->get_info, h, &info_guid,
-					&info_sz, NULL);
-		if (status != EFI_BUFFER_TOO_SMALL) {
-			efi_printk("Failed to get initrd info size\n");
-			goto close_handles;
-		}
-
-grow:
-		status = efi_call_phys3(sys_table->boottime->allocate_pool,
-					EFI_LOADER_DATA, info_sz, &info);
-		if (status != EFI_SUCCESS) {
-			efi_printk("Failed to alloc mem for initrd info\n");
-			goto close_handles;
-		}
-
-		status = efi_call_phys4(h->get_info, h, &info_guid,
-					&info_sz, info);
-		if (status == EFI_BUFFER_TOO_SMALL) {
-			efi_call_phys1(sys_table->boottime->free_pool, info);
-			goto grow;
-		}
-
-		file_sz = info->file_size;
-		efi_call_phys1(sys_table->boottime->free_pool, info);
-
-		if (status != EFI_SUCCESS) {
-			efi_printk("Failed to get initrd info\n");
-			goto close_handles;
-		}
-
-		initrd->size = file_sz;
-		initrd_total += file_sz;
-	}
-
-	if (initrd_total) {
-		unsigned long addr;
-
-		/*
-		 * Multiple initrd's need to be at consecutive
-		 * addresses in memory, so allocate enough memory for
-		 * all the initrd's.
-		 */
-		status = high_alloc(initrd_total, 0x1000,
-				   &initrd_addr, hdr->initrd_addr_max);
-		if (status != EFI_SUCCESS) {
-			efi_printk("Failed to alloc highmem for initrds\n");
-			goto close_handles;
-		}
-
-		/* We've run out of free low memory. */
-		if (initrd_addr > hdr->initrd_addr_max) {
-			efi_printk("We've run out of free low memory\n");
-			status = EFI_INVALID_PARAMETER;
-			goto free_initrd_total;
-		}
-
-		addr = initrd_addr;
-		for (j = 0; j < nr_initrds; j++) {
-			u64 size;
-
-			size = initrds[j].size;
-			while (size) {
-				u64 chunksize;
-				if (size > EFI_READ_CHUNK_SIZE)
-					chunksize = EFI_READ_CHUNK_SIZE;
-				else
-					chunksize = size;
-				status = efi_call_phys3(fh->read,
-							initrds[j].handle,
-							&chunksize, addr);
-				if (status != EFI_SUCCESS) {
-					efi_printk("Failed to read initrd\n");
-					goto free_initrd_total;
-				}
-				addr += chunksize;
-				size -= chunksize;
-			}
-
-			efi_call_phys1(fh->close, initrds[j].handle);
-		}
-
-	}
-
-	efi_call_phys1(sys_table->boottime->free_pool, initrds);
-
-	hdr->ramdisk_image = initrd_addr;
-	hdr->ramdisk_size = initrd_total;
-
-	return status;
-
-free_initrd_total:
-	low_free(initrd_total, initrd_addr);
-
-close_handles:
-	for (k = j; k < i; k++)
-		efi_call_phys1(fh->close, initrds[k].handle);
-free_initrds:
-	efi_call_phys1(sys_table->boottime->free_pool, initrds);
-fail:
-	hdr->ramdisk_image = 0;
-	hdr->ramdisk_size = 0;
-
-	return status;
-}
 
 /*
  * Because the x86 boot code expects to be passed a boot_params we
diff --git a/arch/x86/boot/compressed/eboot.h b/arch/x86/boot/compressed/eboot.h
index 02265107cce3..81b6b652b46a 100644
--- a/arch/x86/boot/compressed/eboot.h
+++ b/arch/x86/boot/compressed/eboot.h
@@ -10,7 +10,6 @@
 #define SEG_GRANULARITY_4KB	(1 << 0)
 
 #define DESC_TYPE_CODE_DATA	(1 << 0)
-#define EFI_READ_CHUNK_SIZE	(1024 * 1024)
 
 #define EFI_CONSOLE_OUT_DEVICE_GUID    \
 	EFI_GUID(0xd3b36f2c, 0xd551, 0x11d4, 0x9a, 0x46, 0x0, 0x90, 0x27, \
diff --git a/drivers/firmware/efi/efi-stub-helper.c b/drivers/firmware/efi/efi-stub-helper.c
new file mode 100644
index 000000000000..8a83387fef92
--- /dev/null
+++ b/drivers/firmware/efi/efi-stub-helper.c
@@ -0,0 +1,463 @@
+/*
+ * Helper functions used by the EFI stub on multiple
+ * architectures. This should be #included by the EFI stub
+ * implementation files.
+ *
+ * Copyright 2011 Intel Corporation; author Matt Fleming
+ *
+ * This file is part of the Linux kernel, and is made available
+ * under the terms of the GNU General Public License version 2.
+ *
+ */
+#define EFI_READ_CHUNK_SIZE	(1024 * 1024)
+
+struct initrd {
+	efi_file_handle_t *handle;
+	u64 size;
+};
+
+
+
+
+static void efi_char16_printk(efi_char16_t *str)
+{
+	struct efi_simple_text_output_protocol *out;
+
+	out = (struct efi_simple_text_output_protocol *)sys_table->con_out;
+	efi_call_phys2(out->output_string, out, str);
+}
+
+static void efi_printk(char *str)
+{
+	char *s8;
+
+	for (s8 = str; *s8; s8++) {
+		efi_char16_t ch[2] = { 0 };
+
+		ch[0] = *s8;
+		if (*s8 == '\n') {
+			efi_char16_t nl[2] = { '\r', 0 };
+			efi_char16_printk(nl);
+		}
+
+		efi_char16_printk(ch);
+	}
+}
+
+
+static efi_status_t __get_map(efi_memory_desc_t **map, unsigned long *map_size,
+			      unsigned long *desc_size)
+{
+	efi_memory_desc_t *m = NULL;
+	efi_status_t status;
+	unsigned long key;
+	u32 desc_version;
+
+	*map_size = sizeof(*m) * 32;
+again:
+	/*
+	 * Add an additional efi_memory_desc_t because we're doing an
+	 * allocation which may be in a new descriptor region.
+	 */
+	*map_size += sizeof(*m);
+	status = efi_call_phys3(sys_table->boottime->allocate_pool,
+				EFI_LOADER_DATA, *map_size, (void **)&m);
+	if (status != EFI_SUCCESS)
+		goto fail;
+
+	status = efi_call_phys5(sys_table->boottime->get_memory_map, map_size,
+				m, &key, desc_size, &desc_version);
+	if (status == EFI_BUFFER_TOO_SMALL) {
+		efi_call_phys1(sys_table->boottime->free_pool, m);
+		goto again;
+	}
+
+	if (status != EFI_SUCCESS)
+		efi_call_phys1(sys_table->boottime->free_pool, m);
+
+fail:
+	*map = m;
+	return status;
+}
+
+/*
+ * Allocate at the highest possible address that is not above 'max'.
+ */
+static efi_status_t high_alloc(unsigned long size, unsigned long align,
+			      unsigned long *addr, unsigned long max)
+{
+	unsigned long map_size, desc_size;
+	efi_memory_desc_t *map;
+	efi_status_t status;
+	unsigned long nr_pages;
+	u64 max_addr = 0;
+	int i;
+
+	status = __get_map(&map, &map_size, &desc_size);
+	if (status != EFI_SUCCESS)
+		goto fail;
+
+	nr_pages = round_up(size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
+again:
+	for (i = 0; i < map_size / desc_size; i++) {
+		efi_memory_desc_t *desc;
+		unsigned long m = (unsigned long)map;
+		u64 start, end;
+
+		desc = (efi_memory_desc_t *)(m + (i * desc_size));
+		if (desc->type != EFI_CONVENTIONAL_MEMORY)
+			continue;
+
+		if (desc->num_pages < nr_pages)
+			continue;
+
+		start = desc->phys_addr;
+		end = start + desc->num_pages * (1UL << EFI_PAGE_SHIFT);
+
+		if ((start + size) > end || (start + size) > max)
+			continue;
+
+		if (end - size > max)
+			end = max;
+
+		if (round_down(end - size, align) < start)
+			continue;
+
+		start = round_down(end - size, align);
+
+		/*
+		 * Don't allocate at 0x0. It will confuse code that
+		 * checks pointers against NULL.
+		 */
+		if (start == 0x0)
+			continue;
+
+		if (start > max_addr)
+			max_addr = start;
+	}
+
+	if (!max_addr)
+		status = EFI_NOT_FOUND;
+	else {
+		status = efi_call_phys4(sys_table->boottime->allocate_pages,
+					EFI_ALLOCATE_ADDRESS, EFI_LOADER_DATA,
+					nr_pages, &max_addr);
+		if (status != EFI_SUCCESS) {
+			max = max_addr;
+			max_addr = 0;
+			goto again;
+		}
+
+		*addr = max_addr;
+	}
+
+free_pool:
+	efi_call_phys1(sys_table->boottime->free_pool, map);
+
+fail:
+	return status;
+}
+
+/*
+ * Allocate at the lowest possible address.
+ */
+static efi_status_t low_alloc(unsigned long size, unsigned long align,
+			      unsigned long *addr)
+{
+	unsigned long map_size, desc_size;
+	efi_memory_desc_t *map;
+	efi_status_t status;
+	unsigned long nr_pages;
+	int i;
+
+	status = __get_map(&map, &map_size, &desc_size);
+	if (status != EFI_SUCCESS)
+		goto fail;
+
+	nr_pages = round_up(size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
+	for (i = 0; i < map_size / desc_size; i++) {
+		efi_memory_desc_t *desc;
+		unsigned long m = (unsigned long)map;
+		u64 start, end;
+
+		desc = (efi_memory_desc_t *)(m + (i * desc_size));
+
+		if (desc->type != EFI_CONVENTIONAL_MEMORY)
+			continue;
+
+		if (desc->num_pages < nr_pages)
+			continue;
+
+		start = desc->phys_addr;
+		end = start + desc->num_pages * (1UL << EFI_PAGE_SHIFT);
+
+		/*
+		 * Don't allocate at 0x0. It will confuse code that
+		 * checks pointers against NULL. Skip the first 8
+		 * bytes so we start at a nice even number.
+		 */
+		if (start == 0x0)
+			start += 8;
+
+		start = round_up(start, align);
+		if ((start + size) > end)
+			continue;
+
+		status = efi_call_phys4(sys_table->boottime->allocate_pages,
+					EFI_ALLOCATE_ADDRESS, EFI_LOADER_DATA,
+					nr_pages, &start);
+		if (status == EFI_SUCCESS) {
+			*addr = start;
+			break;
+		}
+	}
+
+	if (i == map_size / desc_size)
+		status = EFI_NOT_FOUND;
+
+free_pool:
+	efi_call_phys1(sys_table->boottime->free_pool, map);
+fail:
+	return status;
+}
+
+static void low_free(unsigned long size, unsigned long addr)
+{
+	unsigned long nr_pages;
+
+	nr_pages = round_up(size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
+	efi_call_phys2(sys_table->boottime->free_pages, addr, nr_pages);
+}
+
+
+/*
+ * Check the cmdline for a LILO-style initrd= arguments.
+ *
+ * We only support loading an initrd from the same filesystem as the
+ * kernel image.
+ */
+static efi_status_t handle_ramdisks(efi_loaded_image_t *image,
+				    struct setup_header *hdr)
+{
+	struct initrd *initrds;
+	unsigned long initrd_addr;
+	efi_guid_t fs_proto = EFI_FILE_SYSTEM_GUID;
+	u64 initrd_total;
+	efi_file_io_interface_t *io;
+	efi_file_handle_t *fh;
+	efi_status_t status;
+	int nr_initrds;
+	char *str;
+	int i, j, k;
+
+	initrd_addr = 0;
+	initrd_total = 0;
+
+	str = (char *)(unsigned long)hdr->cmd_line_ptr;
+
+	j = 0;			/* See close_handles */
+
+	if (!str || !*str)
+		return EFI_SUCCESS;
+
+	for (nr_initrds = 0; *str; nr_initrds++) {
+		str = strstr(str, "initrd=");
+		if (!str)
+			break;
+
+		str += 7;
+
+		/* Skip any leading slashes */
+		while (*str == '/' || *str == '\\')
+			str++;
+
+		while (*str && *str != ' ' && *str != '\n')
+			str++;
+	}
+
+	if (!nr_initrds)
+		return EFI_SUCCESS;
+
+	status = efi_call_phys3(sys_table->boottime->allocate_pool,
+				EFI_LOADER_DATA,
+				nr_initrds * sizeof(*initrds),
+				&initrds);
+	if (status != EFI_SUCCESS) {
+		efi_printk("Failed to alloc mem for initrds\n");
+		goto fail;
+	}
+
+	str = (char *)(unsigned long)hdr->cmd_line_ptr;
+	for (i = 0; i < nr_initrds; i++) {
+		struct initrd *initrd;
+		efi_file_handle_t *h;
+		efi_file_info_t *info;
+		efi_char16_t filename_16[256];
+		unsigned long info_sz;
+		efi_guid_t info_guid = EFI_FILE_INFO_ID;
+		efi_char16_t *p;
+		u64 file_sz;
+
+		str = strstr(str, "initrd=");
+		if (!str)
+			break;
+
+		str += 7;
+
+		initrd = &initrds[i];
+		p = filename_16;
+
+		/* Skip any leading slashes */
+		while (*str == '/' || *str == '\\')
+			str++;
+
+		while (*str && *str != ' ' && *str != '\n') {
+			if ((u8 *)p >= (u8 *)filename_16 + sizeof(filename_16))
+				break;
+
+			if (*str == '/') {
+				*p++ = '\\';
+				*str++;
+			} else {
+				*p++ = *str++;
+			}
+		}
+
+		*p = '\0';
+
+		/* Only open the volume once. */
+		if (!i) {
+			efi_boot_services_t *boottime;
+
+			boottime = sys_table->boottime;
+
+			status = efi_call_phys3(boottime->handle_protocol,
+					image->device_handle, &fs_proto, &io);
+			if (status != EFI_SUCCESS) {
+				efi_printk("Failed to handle fs_proto\n");
+				goto free_initrds;
+			}
+
+			status = efi_call_phys2(io->open_volume, io, &fh);
+			if (status != EFI_SUCCESS) {
+				efi_printk("Failed to open volume\n");
+				goto free_initrds;
+			}
+		}
+
+		status = efi_call_phys5(fh->open, fh, &h, filename_16,
+					EFI_FILE_MODE_READ, (u64)0);
+		if (status != EFI_SUCCESS) {
+			efi_printk("Failed to open initrd file: ");
+			efi_char16_printk(filename_16);
+			efi_printk("\n");
+			goto close_handles;
+		}
+
+		initrd->handle = h;
+
+		info_sz = 0;
+		status = efi_call_phys4(h->get_info, h, &info_guid,
+					&info_sz, NULL);
+		if (status != EFI_BUFFER_TOO_SMALL) {
+			efi_printk("Failed to get initrd info size\n");
+			goto close_handles;
+		}
+
+grow:
+		status = efi_call_phys3(sys_table->boottime->allocate_pool,
+					EFI_LOADER_DATA, info_sz, &info);
+		if (status != EFI_SUCCESS) {
+			efi_printk("Failed to alloc mem for initrd info\n");
+			goto close_handles;
+		}
+
+		status = efi_call_phys4(h->get_info, h, &info_guid,
+					&info_sz, info);
+		if (status == EFI_BUFFER_TOO_SMALL) {
+			efi_call_phys1(sys_table->boottime->free_pool, info);
+			goto grow;
+		}
+
+		file_sz = info->file_size;
+		efi_call_phys1(sys_table->boottime->free_pool, info);
+
+		if (status != EFI_SUCCESS) {
+			efi_printk("Failed to get initrd info\n");
+			goto close_handles;
+		}
+
+		initrd->size = file_sz;
+		initrd_total += file_sz;
+	}
+
+	if (initrd_total) {
+		unsigned long addr;
+
+		/*
+		 * Multiple initrd's need to be at consecutive
+		 * addresses in memory, so allocate enough memory for
+		 * all the initrd's.
+		 */
+		status = high_alloc(initrd_total, 0x1000,
+				   &initrd_addr, hdr->initrd_addr_max);
+		if (status != EFI_SUCCESS) {
+			efi_printk("Failed to alloc highmem for initrds\n");
+			goto close_handles;
+		}
+
+		/* We've run out of free low memory. */
+		if (initrd_addr > hdr->initrd_addr_max) {
+			efi_printk("We've run out of free low memory\n");
+			status = EFI_INVALID_PARAMETER;
+			goto free_initrd_total;
+		}
+
+		addr = initrd_addr;
+		for (j = 0; j < nr_initrds; j++) {
+			u64 size;
+
+			size = initrds[j].size;
+			while (size) {
+				u64 chunksize;
+				if (size > EFI_READ_CHUNK_SIZE)
+					chunksize = EFI_READ_CHUNK_SIZE;
+				else
+					chunksize = size;
+				status = efi_call_phys3(fh->read,
+							initrds[j].handle,
+							&chunksize, addr);
+				if (status != EFI_SUCCESS) {
+					efi_printk("Failed to read initrd\n");
+					goto free_initrd_total;
+				}
+				addr += chunksize;
+				size -= chunksize;
+			}
+
+			efi_call_phys1(fh->close, initrds[j].handle);
+		}
+
+	}
+
+	efi_call_phys1(sys_table->boottime->free_pool, initrds);
+
+	hdr->ramdisk_image = initrd_addr;
+	hdr->ramdisk_size = initrd_total;
+
+	return status;
+
+free_initrd_total:
+	low_free(initrd_total, initrd_addr);
+
+close_handles:
+	for (k = j; k < i; k++)
+		efi_call_phys1(fh->close, initrds[k].handle);
+free_initrds:
+	efi_call_phys1(sys_table->boottime->free_pool, initrds);
+fail:
+	hdr->ramdisk_image = 0;
+	hdr->ramdisk_size = 0;
+
+	return status;
+}
-- 
cgit v1.2.3


From 876dc36aceb1682cb01426f507f369aec4f68c76 Mon Sep 17 00:00:00 2001
From: Roy Franz
Date: Sun, 22 Sep 2013 15:45:28 -0700
Subject: efi: Add system table pointer argument to shared functions.

Add system table pointer argument to shared EFI stub related functions
so they no longer use a global system table pointer as they did when part
of eboot.c.  For the ARM EFI stub this allows us to avoid global
variables completely and thereby not have to deal with GOT fixups.
Not having the EFI stub fixup its GOT, which is shared with the
decompressor, simplifies the relocating of the zImage to a
bootable address.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/x86/boot/compressed/eboot.c       | 38 +++++++-------
 drivers/firmware/efi/efi-stub-helper.c | 96 ++++++++++++++++++----------------
 2 files changed, 72 insertions(+), 62 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index ab0eefcc5123..65b6a34f56d6 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -453,13 +453,13 @@ struct boot_params *make_boot_params(void *handle, efi_system_table_t *_table)
 	status = efi_call_phys3(sys_table->boottime->handle_protocol,
 				handle, &proto, (void *)&image);
 	if (status != EFI_SUCCESS) {
-		efi_printk("Failed to get handle for LOADED_IMAGE_PROTOCOL\n");
+		efi_printk(sys_table, "Failed to get handle for LOADED_IMAGE_PROTOCOL\n");
 		return NULL;
 	}
 
-	status = low_alloc(0x4000, 1, (unsigned long *)&boot_params);
+	status = low_alloc(sys_table, 0x4000, 1, (unsigned long *)&boot_params);
 	if (status != EFI_SUCCESS) {
-		efi_printk("Failed to alloc lowmem for boot params\n");
+		efi_printk(sys_table, "Failed to alloc lowmem for boot params\n");
 		return NULL;
 	}
 
@@ -503,9 +503,10 @@ struct boot_params *make_boot_params(void *handle, efi_system_table_t *_table)
 
 			options_size++;	/* NUL termination */
 
-			status = low_alloc(options_size, 1, &cmdline);
+			status = low_alloc(sys_table, options_size, 1,
+					   &cmdline);
 			if (status != EFI_SUCCESS) {
-				efi_printk("Failed to alloc mem for cmdline\n");
+				efi_printk(sys_table, "Failed to alloc mem for cmdline\n");
 				goto fail;
 			}
 
@@ -529,16 +530,16 @@ struct boot_params *make_boot_params(void *handle, efi_system_table_t *_table)
 
 	memset(sdt, 0, sizeof(*sdt));
 
-	status = handle_ramdisks(image, hdr);
+	status = handle_ramdisks(sys_table, image, hdr);
 	if (status != EFI_SUCCESS)
 		goto fail2;
 
 	return boot_params;
 fail2:
 	if (options_size)
-		low_free(options_size, hdr->cmd_line_ptr);
+		low_free(sys_table, options_size, hdr->cmd_line_ptr);
 fail:
-	low_free(0x4000, (unsigned long)boot_params);
+	low_free(sys_table, 0x4000, (unsigned long)boot_params);
 	return NULL;
 }
 
@@ -561,7 +562,7 @@ static efi_status_t exit_boot(struct boot_params *boot_params,
 again:
 	size += sizeof(*mem_map) * 2;
 	_size = size;
-	status = low_alloc(size, 1, (unsigned long *)&mem_map);
+	status = low_alloc(sys_table, size, 1, (unsigned long *)&mem_map);
 	if (status != EFI_SUCCESS)
 		return status;
 
@@ -569,7 +570,7 @@ get_map:
 	status = efi_call_phys5(sys_table->boottime->get_memory_map, &size,
 				mem_map, &key, &desc_size, &desc_version);
 	if (status == EFI_BUFFER_TOO_SMALL) {
-		low_free(_size, (unsigned long)mem_map);
+		low_free(sys_table, _size, (unsigned long)mem_map);
 		goto again;
 	}
 
@@ -671,7 +672,7 @@ get_map:
 	return EFI_SUCCESS;
 
 free_mem_map:
-	low_free(_size, (unsigned long)mem_map);
+	low_free(sys_table, _size, (unsigned long)mem_map);
 	return status;
 }
 
@@ -694,10 +695,10 @@ static efi_status_t relocate_kernel(struct setup_header *hdr)
 				EFI_ALLOCATE_ADDRESS, EFI_LOADER_DATA,
 				nr_pages, &start);
 	if (status != EFI_SUCCESS) {
-		status = low_alloc(hdr->init_size, hdr->kernel_alignment,
-				   &start);
+		status = low_alloc(sys_table, hdr->init_size,
+				   hdr->kernel_alignment, &start);
 		if (status != EFI_SUCCESS)
-			efi_printk("Failed to alloc mem for kernel\n");
+			efi_printk(sys_table, "Failed to alloc mem for kernel\n");
 	}
 
 	if (status == EFI_SUCCESS)
@@ -737,14 +738,15 @@ struct boot_params *efi_main(void *handle, efi_system_table_t *_table,
 				EFI_LOADER_DATA, sizeof(*gdt),
 				(void **)&gdt);
 	if (status != EFI_SUCCESS) {
-		efi_printk("Failed to alloc mem for gdt structure\n");
+		efi_printk(sys_table, "Failed to alloc mem for gdt structure\n");
 		goto fail;
 	}
 
 	gdt->size = 0x800;
-	status = low_alloc(gdt->size, 8, (unsigned long *)&gdt->address);
+	status = low_alloc(sys_table, gdt->size, 8,
+			   (unsigned long *)&gdt->address);
 	if (status != EFI_SUCCESS) {
-		efi_printk("Failed to alloc mem for gdt\n");
+		efi_printk(sys_table, "Failed to alloc mem for gdt\n");
 		goto fail;
 	}
 
@@ -752,7 +754,7 @@ struct boot_params *efi_main(void *handle, efi_system_table_t *_table,
 				EFI_LOADER_DATA, sizeof(*idt),
 				(void **)&idt);
 	if (status != EFI_SUCCESS) {
-		efi_printk("Failed to alloc mem for idt structure\n");
+		efi_printk(sys_table, "Failed to alloc mem for idt structure\n");
 		goto fail;
 	}
 
diff --git a/drivers/firmware/efi/efi-stub-helper.c b/drivers/firmware/efi/efi-stub-helper.c
index 8a83387fef92..05c539e9a3c8 100644
--- a/drivers/firmware/efi/efi-stub-helper.c
+++ b/drivers/firmware/efi/efi-stub-helper.c
@@ -19,15 +19,16 @@ struct initrd {
 
 
 
-static void efi_char16_printk(efi_char16_t *str)
+static void efi_char16_printk(efi_system_table_t *sys_table_arg,
+			      efi_char16_t *str)
 {
 	struct efi_simple_text_output_protocol *out;
 
-	out = (struct efi_simple_text_output_protocol *)sys_table->con_out;
+	out = (struct efi_simple_text_output_protocol *)sys_table_arg->con_out;
 	efi_call_phys2(out->output_string, out, str);
 }
 
-static void efi_printk(char *str)
+static void efi_printk(efi_system_table_t *sys_table_arg, char *str)
 {
 	char *s8;
 
@@ -37,15 +38,17 @@ static void efi_printk(char *str)
 		ch[0] = *s8;
 		if (*s8 == '\n') {
 			efi_char16_t nl[2] = { '\r', 0 };
-			efi_char16_printk(nl);
+			efi_char16_printk(sys_table_arg, nl);
 		}
 
-		efi_char16_printk(ch);
+		efi_char16_printk(sys_table_arg, ch);
 	}
 }
 
 
-static efi_status_t __get_map(efi_memory_desc_t **map, unsigned long *map_size,
+static efi_status_t __get_map(efi_system_table_t *sys_table_arg,
+			      efi_memory_desc_t **map,
+			      unsigned long *map_size,
 			      unsigned long *desc_size)
 {
 	efi_memory_desc_t *m = NULL;
@@ -60,20 +63,20 @@ again:
 	 * allocation which may be in a new descriptor region.
 	 */
 	*map_size += sizeof(*m);
-	status = efi_call_phys3(sys_table->boottime->allocate_pool,
+	status = efi_call_phys3(sys_table_arg->boottime->allocate_pool,
 				EFI_LOADER_DATA, *map_size, (void **)&m);
 	if (status != EFI_SUCCESS)
 		goto fail;
 
-	status = efi_call_phys5(sys_table->boottime->get_memory_map, map_size,
-				m, &key, desc_size, &desc_version);
+	status = efi_call_phys5(sys_table_arg->boottime->get_memory_map,
+				map_size, m, &key, desc_size, &desc_version);
 	if (status == EFI_BUFFER_TOO_SMALL) {
-		efi_call_phys1(sys_table->boottime->free_pool, m);
+		efi_call_phys1(sys_table_arg->boottime->free_pool, m);
 		goto again;
 	}
 
 	if (status != EFI_SUCCESS)
-		efi_call_phys1(sys_table->boottime->free_pool, m);
+		efi_call_phys1(sys_table_arg->boottime->free_pool, m);
 
 fail:
 	*map = m;
@@ -83,8 +86,9 @@ fail:
 /*
  * Allocate at the highest possible address that is not above 'max'.
  */
-static efi_status_t high_alloc(unsigned long size, unsigned long align,
-			      unsigned long *addr, unsigned long max)
+static efi_status_t high_alloc(efi_system_table_t *sys_table_arg,
+			       unsigned long size, unsigned long align,
+			       unsigned long *addr, unsigned long max)
 {
 	unsigned long map_size, desc_size;
 	efi_memory_desc_t *map;
@@ -93,7 +97,7 @@ static efi_status_t high_alloc(unsigned long size, unsigned long align,
 	u64 max_addr = 0;
 	int i;
 
-	status = __get_map(&map, &map_size, &desc_size);
+	status = __get_map(sys_table_arg, &map, &map_size, &desc_size);
 	if (status != EFI_SUCCESS)
 		goto fail;
 
@@ -139,7 +143,7 @@ again:
 	if (!max_addr)
 		status = EFI_NOT_FOUND;
 	else {
-		status = efi_call_phys4(sys_table->boottime->allocate_pages,
+		status = efi_call_phys4(sys_table_arg->boottime->allocate_pages,
 					EFI_ALLOCATE_ADDRESS, EFI_LOADER_DATA,
 					nr_pages, &max_addr);
 		if (status != EFI_SUCCESS) {
@@ -152,7 +156,7 @@ again:
 	}
 
 free_pool:
-	efi_call_phys1(sys_table->boottime->free_pool, map);
+	efi_call_phys1(sys_table_arg->boottime->free_pool, map);
 
 fail:
 	return status;
@@ -161,7 +165,8 @@ fail:
 /*
  * Allocate at the lowest possible address.
  */
-static efi_status_t low_alloc(unsigned long size, unsigned long align,
+static efi_status_t low_alloc(efi_system_table_t *sys_table_arg,
+		unsigned long size, unsigned long align,
 			      unsigned long *addr)
 {
 	unsigned long map_size, desc_size;
@@ -170,7 +175,7 @@ static efi_status_t low_alloc(unsigned long size, unsigned long align,
 	unsigned long nr_pages;
 	int i;
 
-	status = __get_map(&map, &map_size, &desc_size);
+	status = __get_map(sys_table_arg, &map, &map_size, &desc_size);
 	if (status != EFI_SUCCESS)
 		goto fail;
 
@@ -203,7 +208,7 @@ static efi_status_t low_alloc(unsigned long size, unsigned long align,
 		if ((start + size) > end)
 			continue;
 
-		status = efi_call_phys4(sys_table->boottime->allocate_pages,
+		status = efi_call_phys4(sys_table_arg->boottime->allocate_pages,
 					EFI_ALLOCATE_ADDRESS, EFI_LOADER_DATA,
 					nr_pages, &start);
 		if (status == EFI_SUCCESS) {
@@ -216,17 +221,18 @@ static efi_status_t low_alloc(unsigned long size, unsigned long align,
 		status = EFI_NOT_FOUND;
 
 free_pool:
-	efi_call_phys1(sys_table->boottime->free_pool, map);
+	efi_call_phys1(sys_table_arg->boottime->free_pool, map);
 fail:
 	return status;
 }
 
-static void low_free(unsigned long size, unsigned long addr)
+static void low_free(efi_system_table_t *sys_table_arg, unsigned long size,
+		     unsigned long addr)
 {
 	unsigned long nr_pages;
 
 	nr_pages = round_up(size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
-	efi_call_phys2(sys_table->boottime->free_pages, addr, nr_pages);
+	efi_call_phys2(sys_table_arg->boottime->free_pages, addr, nr_pages);
 }
 
 
@@ -236,7 +242,8 @@ static void low_free(unsigned long size, unsigned long addr)
  * We only support loading an initrd from the same filesystem as the
  * kernel image.
  */
-static efi_status_t handle_ramdisks(efi_loaded_image_t *image,
+static efi_status_t handle_ramdisks(efi_system_table_t *sys_table_arg,
+				    efi_loaded_image_t *image,
 				    struct setup_header *hdr)
 {
 	struct initrd *initrds;
@@ -278,12 +285,12 @@ static efi_status_t handle_ramdisks(efi_loaded_image_t *image,
 	if (!nr_initrds)
 		return EFI_SUCCESS;
 
-	status = efi_call_phys3(sys_table->boottime->allocate_pool,
+	status = efi_call_phys3(sys_table_arg->boottime->allocate_pool,
 				EFI_LOADER_DATA,
 				nr_initrds * sizeof(*initrds),
 				&initrds);
 	if (status != EFI_SUCCESS) {
-		efi_printk("Failed to alloc mem for initrds\n");
+		efi_printk(sys_table_arg, "Failed to alloc mem for initrds\n");
 		goto fail;
 	}
 
@@ -329,18 +336,18 @@ static efi_status_t handle_ramdisks(efi_loaded_image_t *image,
 		if (!i) {
 			efi_boot_services_t *boottime;
 
-			boottime = sys_table->boottime;
+			boottime = sys_table_arg->boottime;
 
 			status = efi_call_phys3(boottime->handle_protocol,
 					image->device_handle, &fs_proto, &io);
 			if (status != EFI_SUCCESS) {
-				efi_printk("Failed to handle fs_proto\n");
+				efi_printk(sys_table_arg, "Failed to handle fs_proto\n");
 				goto free_initrds;
 			}
 
 			status = efi_call_phys2(io->open_volume, io, &fh);
 			if (status != EFI_SUCCESS) {
-				efi_printk("Failed to open volume\n");
+				efi_printk(sys_table_arg, "Failed to open volume\n");
 				goto free_initrds;
 			}
 		}
@@ -348,9 +355,9 @@ static efi_status_t handle_ramdisks(efi_loaded_image_t *image,
 		status = efi_call_phys5(fh->open, fh, &h, filename_16,
 					EFI_FILE_MODE_READ, (u64)0);
 		if (status != EFI_SUCCESS) {
-			efi_printk("Failed to open initrd file: ");
-			efi_char16_printk(filename_16);
-			efi_printk("\n");
+			efi_printk(sys_table_arg, "Failed to open initrd file: ");
+			efi_char16_printk(sys_table_arg, filename_16);
+			efi_printk(sys_table_arg, "\n");
 			goto close_handles;
 		}
 
@@ -360,30 +367,31 @@ static efi_status_t handle_ramdisks(efi_loaded_image_t *image,
 		status = efi_call_phys4(h->get_info, h, &info_guid,
 					&info_sz, NULL);
 		if (status != EFI_BUFFER_TOO_SMALL) {
-			efi_printk("Failed to get initrd info size\n");
+			efi_printk(sys_table_arg, "Failed to get initrd info size\n");
 			goto close_handles;
 		}
 
 grow:
-		status = efi_call_phys3(sys_table->boottime->allocate_pool,
+		status = efi_call_phys3(sys_table_arg->boottime->allocate_pool,
 					EFI_LOADER_DATA, info_sz, &info);
 		if (status != EFI_SUCCESS) {
-			efi_printk("Failed to alloc mem for initrd info\n");
+			efi_printk(sys_table_arg, "Failed to alloc mem for initrd info\n");
 			goto close_handles;
 		}
 
 		status = efi_call_phys4(h->get_info, h, &info_guid,
 					&info_sz, info);
 		if (status == EFI_BUFFER_TOO_SMALL) {
-			efi_call_phys1(sys_table->boottime->free_pool, info);
+			efi_call_phys1(sys_table_arg->boottime->free_pool,
+				       info);
 			goto grow;
 		}
 
 		file_sz = info->file_size;
-		efi_call_phys1(sys_table->boottime->free_pool, info);
+		efi_call_phys1(sys_table_arg->boottime->free_pool, info);
 
 		if (status != EFI_SUCCESS) {
-			efi_printk("Failed to get initrd info\n");
+			efi_printk(sys_table_arg, "Failed to get initrd info\n");
 			goto close_handles;
 		}
 
@@ -399,16 +407,16 @@ grow:
 		 * addresses in memory, so allocate enough memory for
 		 * all the initrd's.
 		 */
-		status = high_alloc(initrd_total, 0x1000,
+		status = high_alloc(sys_table_arg, initrd_total, 0x1000,
 				   &initrd_addr, hdr->initrd_addr_max);
 		if (status != EFI_SUCCESS) {
-			efi_printk("Failed to alloc highmem for initrds\n");
+			efi_printk(sys_table_arg, "Failed to alloc highmem for initrds\n");
 			goto close_handles;
 		}
 
 		/* We've run out of free low memory. */
 		if (initrd_addr > hdr->initrd_addr_max) {
-			efi_printk("We've run out of free low memory\n");
+			efi_printk(sys_table_arg, "We've run out of free low memory\n");
 			status = EFI_INVALID_PARAMETER;
 			goto free_initrd_total;
 		}
@@ -428,7 +436,7 @@ grow:
 							initrds[j].handle,
 							&chunksize, addr);
 				if (status != EFI_SUCCESS) {
-					efi_printk("Failed to read initrd\n");
+					efi_printk(sys_table_arg, "Failed to read initrd\n");
 					goto free_initrd_total;
 				}
 				addr += chunksize;
@@ -440,7 +448,7 @@ grow:
 
 	}
 
-	efi_call_phys1(sys_table->boottime->free_pool, initrds);
+	efi_call_phys1(sys_table_arg->boottime->free_pool, initrds);
 
 	hdr->ramdisk_image = initrd_addr;
 	hdr->ramdisk_size = initrd_total;
@@ -448,13 +456,13 @@ grow:
 	return status;
 
 free_initrd_total:
-	low_free(initrd_total, initrd_addr);
+	low_free(sys_table_arg, initrd_total, initrd_addr);
 
 close_handles:
 	for (k = j; k < i; k++)
 		efi_call_phys1(fh->close, initrds[k].handle);
 free_initrds:
-	efi_call_phys1(sys_table->boottime->free_pool, initrds);
+	efi_call_phys1(sys_table_arg->boottime->free_pool, initrds);
 fail:
 	hdr->ramdisk_image = 0;
 	hdr->ramdisk_size = 0;
-- 
cgit v1.2.3


From 40e4530a00b7d52332fe9a1361388fda8e5260da Mon Sep 17 00:00:00 2001
From: Roy Franz
Date: Sun, 22 Sep 2013 15:45:29 -0700
Subject: efi: Rename memory allocation/free functions

Rename them to be more similar, as low_free() could be used to free
memory allocated by both high_alloc() and low_alloc().
high_alloc() -> efi_high_alloc()
low_alloc()  -> efi_low_alloc()
low_free()   -> efi_free()

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/x86/boot/compressed/eboot.c       | 19 ++++++++++---------
 drivers/firmware/efi/efi-stub-helper.c | 14 +++++++-------
 2 files changed, 17 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index 65b6a34f56d6..2a4430a0fb03 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -457,7 +457,8 @@ struct boot_params *make_boot_params(void *handle, efi_system_table_t *_table)
 		return NULL;
 	}
 
-	status = low_alloc(sys_table, 0x4000, 1, (unsigned long *)&boot_params);
+	status = efi_low_alloc(sys_table, 0x4000, 1,
+			       (unsigned long *)&boot_params);
 	if (status != EFI_SUCCESS) {
 		efi_printk(sys_table, "Failed to alloc lowmem for boot params\n");
 		return NULL;
@@ -503,7 +504,7 @@ struct boot_params *make_boot_params(void *handle, efi_system_table_t *_table)
 
 			options_size++;	/* NUL termination */
 
-			status = low_alloc(sys_table, options_size, 1,
+			status = efi_low_alloc(sys_table, options_size, 1,
 					   &cmdline);
 			if (status != EFI_SUCCESS) {
 				efi_printk(sys_table, "Failed to alloc mem for cmdline\n");
@@ -537,9 +538,9 @@ struct boot_params *make_boot_params(void *handle, efi_system_table_t *_table)
 	return boot_params;
 fail2:
 	if (options_size)
-		low_free(sys_table, options_size, hdr->cmd_line_ptr);
+		efi_free(sys_table, options_size, hdr->cmd_line_ptr);
 fail:
-	low_free(sys_table, 0x4000, (unsigned long)boot_params);
+	efi_free(sys_table, 0x4000, (unsigned long)boot_params);
 	return NULL;
 }
 
@@ -562,7 +563,7 @@ static efi_status_t exit_boot(struct boot_params *boot_params,
 again:
 	size += sizeof(*mem_map) * 2;
 	_size = size;
-	status = low_alloc(sys_table, size, 1, (unsigned long *)&mem_map);
+	status = efi_low_alloc(sys_table, size, 1, (unsigned long *)&mem_map);
 	if (status != EFI_SUCCESS)
 		return status;
 
@@ -570,7 +571,7 @@ get_map:
 	status = efi_call_phys5(sys_table->boottime->get_memory_map, &size,
 				mem_map, &key, &desc_size, &desc_version);
 	if (status == EFI_BUFFER_TOO_SMALL) {
-		low_free(sys_table, _size, (unsigned long)mem_map);
+		efi_free(sys_table, _size, (unsigned long)mem_map);
 		goto again;
 	}
 
@@ -672,7 +673,7 @@ get_map:
 	return EFI_SUCCESS;
 
 free_mem_map:
-	low_free(sys_table, _size, (unsigned long)mem_map);
+	efi_free(sys_table, _size, (unsigned long)mem_map);
 	return status;
 }
 
@@ -695,7 +696,7 @@ static efi_status_t relocate_kernel(struct setup_header *hdr)
 				EFI_ALLOCATE_ADDRESS, EFI_LOADER_DATA,
 				nr_pages, &start);
 	if (status != EFI_SUCCESS) {
-		status = low_alloc(sys_table, hdr->init_size,
+		status = efi_low_alloc(sys_table, hdr->init_size,
 				   hdr->kernel_alignment, &start);
 		if (status != EFI_SUCCESS)
 			efi_printk(sys_table, "Failed to alloc mem for kernel\n");
@@ -743,7 +744,7 @@ struct boot_params *efi_main(void *handle, efi_system_table_t *_table,
 	}
 
 	gdt->size = 0x800;
-	status = low_alloc(sys_table, gdt->size, 8,
+	status = efi_low_alloc(sys_table, gdt->size, 8,
 			   (unsigned long *)&gdt->address);
 	if (status != EFI_SUCCESS) {
 		efi_printk(sys_table, "Failed to alloc mem for gdt\n");
diff --git a/drivers/firmware/efi/efi-stub-helper.c b/drivers/firmware/efi/efi-stub-helper.c
index 05c539e9a3c8..2f528fb541f9 100644
--- a/drivers/firmware/efi/efi-stub-helper.c
+++ b/drivers/firmware/efi/efi-stub-helper.c
@@ -86,7 +86,7 @@ fail:
 /*
  * Allocate at the highest possible address that is not above 'max'.
  */
-static efi_status_t high_alloc(efi_system_table_t *sys_table_arg,
+static efi_status_t efi_high_alloc(efi_system_table_t *sys_table_arg,
 			       unsigned long size, unsigned long align,
 			       unsigned long *addr, unsigned long max)
 {
@@ -165,8 +165,8 @@ fail:
 /*
  * Allocate at the lowest possible address.
  */
-static efi_status_t low_alloc(efi_system_table_t *sys_table_arg,
-		unsigned long size, unsigned long align,
+static efi_status_t efi_low_alloc(efi_system_table_t *sys_table_arg,
+			      unsigned long size, unsigned long align,
 			      unsigned long *addr)
 {
 	unsigned long map_size, desc_size;
@@ -226,7 +226,7 @@ fail:
 	return status;
 }
 
-static void low_free(efi_system_table_t *sys_table_arg, unsigned long size,
+static void efi_free(efi_system_table_t *sys_table_arg, unsigned long size,
 		     unsigned long addr)
 {
 	unsigned long nr_pages;
@@ -407,8 +407,8 @@ grow:
 		 * addresses in memory, so allocate enough memory for
 		 * all the initrd's.
 		 */
-		status = high_alloc(sys_table_arg, initrd_total, 0x1000,
-				   &initrd_addr, hdr->initrd_addr_max);
+		status = efi_high_alloc(sys_table_arg, initrd_total, 0x1000,
+				    &initrd_addr, hdr->initrd_addr_max);
 		if (status != EFI_SUCCESS) {
 			efi_printk(sys_table_arg, "Failed to alloc highmem for initrds\n");
 			goto close_handles;
@@ -456,7 +456,7 @@ grow:
 	return status;
 
 free_initrd_total:
-	low_free(sys_table_arg, initrd_total, initrd_addr);
+	efi_free(sys_table_arg, initrd_total, initrd_addr);
 
 close_handles:
 	for (k = j; k < i; k++)
-- 
cgit v1.2.3


From c6866d7238d4f26055de8db9c1d5a700e554b2d4 Mon Sep 17 00:00:00 2001
From: Roy Franz
Date: Sun, 22 Sep 2013 15:45:31 -0700
Subject: efi: Move relocate_kernel() to shared file.

The relocate_kernel() function will be generalized and used
by all architectures, as they all have similar requirements.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/x86/boot/compressed/eboot.c       | 34 ---------------------------------
 drivers/firmware/efi/efi-stub-helper.c | 35 ++++++++++++++++++++++++++++++++++
 2 files changed, 35 insertions(+), 34 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index 2a4430a0fb03..5bbba868e2bc 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -677,40 +677,6 @@ free_mem_map:
 	return status;
 }
 
-static efi_status_t relocate_kernel(struct setup_header *hdr)
-{
-	unsigned long start, nr_pages;
-	efi_status_t status;
-
-	/*
-	 * The EFI firmware loader could have placed the kernel image
-	 * anywhere in memory, but the kernel has various restrictions
-	 * on the max physical address it can run at. Attempt to move
-	 * the kernel to boot_params.pref_address, or as low as
-	 * possible.
-	 */
-	start = hdr->pref_address;
-	nr_pages = round_up(hdr->init_size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
-
-	status = efi_call_phys4(sys_table->boottime->allocate_pages,
-				EFI_ALLOCATE_ADDRESS, EFI_LOADER_DATA,
-				nr_pages, &start);
-	if (status != EFI_SUCCESS) {
-		status = efi_low_alloc(sys_table, hdr->init_size,
-				   hdr->kernel_alignment, &start);
-		if (status != EFI_SUCCESS)
-			efi_printk(sys_table, "Failed to alloc mem for kernel\n");
-	}
-
-	if (status == EFI_SUCCESS)
-		memcpy((void *)start, (void *)(unsigned long)hdr->code32_start,
-		       hdr->init_size);
-
-	hdr->pref_address = hdr->code32_start;
-	hdr->code32_start = (__u32)start;
-
-	return status;
-}
 
 /*
  * On success we return a pointer to a boot_params structure, and NULL
diff --git a/drivers/firmware/efi/efi-stub-helper.c b/drivers/firmware/efi/efi-stub-helper.c
index a25675833598..333ed9c37751 100644
--- a/drivers/firmware/efi/efi-stub-helper.c
+++ b/drivers/firmware/efi/efi-stub-helper.c
@@ -485,3 +485,38 @@ fail:
 
 	return status;
 }
+
+static efi_status_t relocate_kernel(struct setup_header *hdr)
+{
+	unsigned long start, nr_pages;
+	efi_status_t status;
+
+	/*
+	 * The EFI firmware loader could have placed the kernel image
+	 * anywhere in memory, but the kernel has various restrictions
+	 * on the max physical address it can run at. Attempt to move
+	 * the kernel to boot_params.pref_address, or as low as
+	 * possible.
+	 */
+	start = hdr->pref_address;
+	nr_pages = round_up(hdr->init_size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
+
+	status = efi_call_phys4(sys_table->boottime->allocate_pages,
+				EFI_ALLOCATE_ADDRESS, EFI_LOADER_DATA,
+				nr_pages, &start);
+	if (status != EFI_SUCCESS) {
+		status = efi_low_alloc(sys_table, hdr->init_size,
+				   hdr->kernel_alignment, &start);
+		if (status != EFI_SUCCESS)
+			efi_printk(sys_table, "Failed to alloc mem for kernel\n");
+	}
+
+	if (status == EFI_SUCCESS)
+		memcpy((void *)start, (void *)(unsigned long)hdr->code32_start,
+		       hdr->init_size);
+
+	hdr->pref_address = hdr->code32_start;
+	hdr->code32_start = (__u32)start;
+
+	return status;
+}
-- 
cgit v1.2.3


From 4a9f3a7c336a6b0ffeef2523bef93e67b0921163 Mon Sep 17 00:00:00 2001
From: Roy Franz
Date: Sun, 22 Sep 2013 15:45:32 -0700
Subject: efi: Generalize relocate_kernel() for use by other architectures.

Rename relocate_kernel() to efi_relocate_kernel(), and take
parameters rather than x86 specific structure.  Add max_addr
argument as for ARM we have some address constraints that we
need to enforce when relocating the kernel.  Add alloc_size
parameter for use by ARM64 which uses an uncompressed kernel,
and needs to allocate space for BSS.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/x86/boot/compressed/eboot.c       | 10 ++++-
 drivers/firmware/efi/efi-stub-helper.c | 76 ++++++++++++++++++++++++----------
 2 files changed, 63 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index 5bbba868e2bc..2e997b6fbdb1 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -733,10 +733,16 @@ struct boot_params *efi_main(void *handle, efi_system_table_t *_table,
 	 * address, relocate it.
 	 */
 	if (hdr->pref_address != hdr->code32_start) {
-		status = relocate_kernel(hdr);
-
+		unsigned long bzimage_addr = hdr->code32_start;
+		status = efi_relocate_kernel(sys_table, &bzimage_addr,
+					     hdr->init_size, hdr->init_size,
+					     hdr->pref_address,
+					     hdr->kernel_alignment);
 		if (status != EFI_SUCCESS)
 			goto fail;
+
+		hdr->pref_address = hdr->code32_start;
+		hdr->code32_start = bzimage_addr;
 	}
 
 	status = exit_boot(boot_params, handle);
diff --git a/drivers/firmware/efi/efi-stub-helper.c b/drivers/firmware/efi/efi-stub-helper.c
index 333ed9c37751..361e24d8d665 100644
--- a/drivers/firmware/efi/efi-stub-helper.c
+++ b/drivers/firmware/efi/efi-stub-helper.c
@@ -485,38 +485,72 @@ fail:
 
 	return status;
 }
-
-static efi_status_t relocate_kernel(struct setup_header *hdr)
+/*
+ * Relocate a kernel image, either compressed or uncompressed.
+ * In the ARM64 case, all kernel images are currently
+ * uncompressed, and as such when we relocate it we need to
+ * allocate additional space for the BSS segment. Any low
+ * memory that this function should avoid needs to be
+ * unavailable in the EFI memory map, as if the preferred
+ * address is not available the lowest available address will
+ * be used.
+ */
+static efi_status_t efi_relocate_kernel(efi_system_table_t *sys_table_arg,
+					unsigned long *image_addr,
+					unsigned long image_size,
+					unsigned long alloc_size,
+					unsigned long preferred_addr,
+					unsigned long alignment)
 {
-	unsigned long start, nr_pages;
+	unsigned long cur_image_addr;
+	unsigned long new_addr = 0;
 	efi_status_t status;
+	unsigned long nr_pages;
+	efi_physical_addr_t efi_addr = preferred_addr;
+
+	if (!image_addr || !image_size || !alloc_size)
+		return EFI_INVALID_PARAMETER;
+	if (alloc_size < image_size)
+		return EFI_INVALID_PARAMETER;
+
+	cur_image_addr = *image_addr;
 
 	/*
 	 * The EFI firmware loader could have placed the kernel image
-	 * anywhere in memory, but the kernel has various restrictions
-	 * on the max physical address it can run at. Attempt to move
-	 * the kernel to boot_params.pref_address, or as low as
-	 * possible.
+	 * anywhere in memory, but the kernel has restrictions on the
+	 * max physical address it can run at.  Some architectures
+	 * also have a prefered address, so first try to relocate
+	 * to the preferred address.  If that fails, allocate as low
+	 * as possible while respecting the required alignment.
 	 */
-	start = hdr->pref_address;
-	nr_pages = round_up(hdr->init_size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
-
-	status = efi_call_phys4(sys_table->boottime->allocate_pages,
+	nr_pages = round_up(alloc_size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
+	status = efi_call_phys4(sys_table_arg->boottime->allocate_pages,
 				EFI_ALLOCATE_ADDRESS, EFI_LOADER_DATA,
-				nr_pages, &start);
+				nr_pages, &efi_addr);
+	new_addr = efi_addr;
+	/*
+	 * If preferred address allocation failed allocate as low as
+	 * possible.
+	 */
 	if (status != EFI_SUCCESS) {
-		status = efi_low_alloc(sys_table, hdr->init_size,
-				   hdr->kernel_alignment, &start);
-		if (status != EFI_SUCCESS)
-			efi_printk(sys_table, "Failed to alloc mem for kernel\n");
+		status = efi_low_alloc(sys_table_arg, alloc_size, alignment,
+				       &new_addr);
+	}
+	if (status != EFI_SUCCESS) {
+		efi_printk(sys_table_arg, "ERROR: Failed to allocate usable memory for kernel.\n");
+		return status;
 	}
 
-	if (status == EFI_SUCCESS)
-		memcpy((void *)start, (void *)(unsigned long)hdr->code32_start,
-		       hdr->init_size);
+	/*
+	 * We know source/dest won't overlap since both memory ranges
+	 * have been allocated by UEFI, so we can safely use memcpy.
+	 */
+	memcpy((void *)new_addr, (void *)cur_image_addr, image_size);
+	/* Zero any extra space we may have allocated for BSS. */
+	memset((void *)(new_addr + image_size), alloc_size - image_size, 0);
 
-	hdr->pref_address = hdr->code32_start;
-	hdr->code32_start = (__u32)start;
+	/* Return the new address of the relocated image. */
+	*image_addr = new_addr;
 
 	return status;
 }
-- 
cgit v1.2.3


From 5fef3870c572a30f9def07c4ded69dc37a9cf5d9 Mon Sep 17 00:00:00 2001
From: Roy Franz
Date: Sun, 22 Sep 2013 15:45:33 -0700
Subject: efi: Move unicode to ASCII conversion to shared function.

Move the open-coded conversion to a shared function for
use by all architectures.  Change the allocation to prefer
a high address for ARM, as this is required to avoid conflicts
with reserved regions in low memory.  We don't know the specifics
of these regions until after we process the command line and
device tree.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/x86/boot/compressed/eboot.c       | 43 ++++--------------------
 drivers/firmware/efi/efi-stub-helper.c | 61 ++++++++++++++++++++++++++++++++++
 2 files changed, 67 insertions(+), 37 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index 2e997b6fbdb1..5e708c0d466f 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -435,11 +435,10 @@ struct boot_params *make_boot_params(void *handle, efi_system_table_t *_table)
 	struct efi_info *efi;
 	efi_loaded_image_t *image;
 	void *options;
-	u32 load_options_size;
 	efi_guid_t proto = LOADED_IMAGE_PROTOCOL_GUID;
 	int options_size = 0;
 	efi_status_t status;
-	unsigned long cmdline;
+	char *cmdline_ptr;
 	u16 *s2;
 	u8 *s1;
 	int i;
@@ -487,41 +486,11 @@ struct boot_params *make_boot_params(void *handle, efi_system_table_t *_table)
 	hdr->type_of_loader = 0x21;
 
 	/* Convert unicode cmdline to ascii */
-	options = image->load_options;
-	load_options_size = image->load_options_size / 2; /* ASCII */
-	cmdline = 0;
-	s2 = (u16 *)options;
-
-	if (s2) {
-		while (*s2 && *s2 != '\n' && options_size < load_options_size) {
-			s2++;
-			options_size++;
-		}
-
-		if (options_size) {
-			if (options_size > hdr->cmdline_size)
-				options_size = hdr->cmdline_size;
-
-			options_size++;	/* NUL termination */
-
-			status = efi_low_alloc(sys_table, options_size, 1,
-					   &cmdline);
-			if (status != EFI_SUCCESS) {
-				efi_printk(sys_table, "Failed to alloc mem for cmdline\n");
-				goto fail;
-			}
-
-			s1 = (u8 *)(unsigned long)cmdline;
-			s2 = (u16 *)options;
-
-			for (i = 0; i < options_size - 1; i++)
-				*s1++ = *s2++;
-
-			*s1 = '\0';
-		}
-	}
-
-	hdr->cmd_line_ptr = cmdline;
+	cmdline_ptr = efi_convert_cmdline_to_ascii(sys_table, image,
+						   &options_size);
+	if (!cmdline_ptr)
+		goto fail;
+	hdr->cmd_line_ptr = (unsigned long)cmdline_ptr;
 
 	hdr->ramdisk_image = 0;
 	hdr->ramdisk_size = 0;
diff --git a/drivers/firmware/efi/efi-stub-helper.c b/drivers/firmware/efi/efi-stub-helper.c
index 361e24d8d665..96665b730c51 100644
--- a/drivers/firmware/efi/efi-stub-helper.c
+++ b/drivers/firmware/efi/efi-stub-helper.c
@@ -554,3 +554,64 @@ static efi_status_t efi_relocate_kernel(efi_system_table_t *sys_table_arg,
 
 	return status;
 }
+
+/*
+ * Convert the unicode UEFI command line to ASCII to pass to kernel.
+ * Size of memory allocated return in *cmd_line_len.
+ * Returns NULL on error.
+ */
+static char *efi_convert_cmdline_to_ascii(efi_system_table_t *sys_table_arg,
+				      efi_loaded_image_t *image,
+				      int *cmd_line_len)
+{
+	u16 *s2;
+	u8 *s1 = NULL;
+	unsigned long cmdline_addr = 0;
+	int load_options_size = image->load_options_size / 2; /* ASCII */
+	void *options = image->load_options;
+	int options_size = 0;
+	efi_status_t status;
+	int i;
+	u16 zero = 0;
+
+	if (options) {
+		s2 = options;
+		while (*s2 && *s2 != '\n' && options_size < load_options_size) {
+			s2++;
+			options_size++;
+		}
+	}
+
+	if (options_size == 0) {
+		/* No command line options, so return empty string*/
+		options_size = 1;
+		options = &zero;
+	}
+
+	options_size++;  /* NUL termination */
+#ifdef CONFIG_ARM
+	/*
+	 * For ARM, allocate at a high address to avoid reserved
+	 * regions at low addresses that we don't know the specfics of
+	 * at the time we are processing the command line.
+	 */
+	status = efi_high_alloc(sys_table_arg, options_size, 0,
+			    &cmdline_addr, 0xfffff000);
+#else
+	status = efi_low_alloc(sys_table_arg, options_size, 0,
+			    &cmdline_addr);
+#endif
+	if (status != EFI_SUCCESS)
+		return NULL;
+
+	s1 = (u8 *)cmdline_addr;
+	s2 = (u16 *)options;
+
+	for (i = 0; i < options_size - 1; i++)
+		*s1++ = *s2++;
+
+	*s1 = '\0';
+
+	*cmd_line_len = options_size;
+	return (char *)cmdline_addr;
+}
-- 
cgit v1.2.3


From ae8e9060a3ecfd22bd5059e39f81547613ae376c Mon Sep 17 00:00:00 2001
From: Roy Franz
Date: Sun, 22 Sep 2013 15:45:37 -0700
Subject: efi: use efi_get_memory_map() to get final map for x86

Replace the open-coded memory map getting with the
efi_get_memory_map() that is now general enough to use.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/x86/boot/compressed/eboot.c | 22 +++++-----------------
 1 file changed, 5 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index 5e708c0d466f..bf2c35d5ec1f 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -527,25 +527,12 @@ static efi_status_t exit_boot(struct boot_params *boot_params,
 	u8 nr_entries;
 	int i;
 
-	size = sizeof(*mem_map) * 32;
-
-again:
-	size += sizeof(*mem_map) * 2;
-	_size = size;
-	status = efi_low_alloc(sys_table, size, 1, (unsigned long *)&mem_map);
-	if (status != EFI_SUCCESS)
-		return status;
-
 get_map:
-	status = efi_call_phys5(sys_table->boottime->get_memory_map, &size,
-				mem_map, &key, &desc_size, &desc_version);
-	if (status == EFI_BUFFER_TOO_SMALL) {
-		efi_free(sys_table, _size, (unsigned long)mem_map);
-		goto again;
-	}
+	status = efi_get_memory_map(sys_table, &mem_map, &size, &desc_size,
+				    &desc_version, &key);
 
 	if (status != EFI_SUCCESS)
-		goto free_mem_map;
+		return status;
 
 	memcpy(&efi->efi_loader_signature, EFI_LOADER_SIGNATURE, sizeof(__u32));
 	efi->efi_systab = (unsigned long)sys_table;
@@ -574,6 +561,7 @@ get_map:
 			goto free_mem_map;
 
 		called_exit = true;
+		efi_call_phys1(sys_table->boottime->free_pool, mem_map);
 		goto get_map;
 	}
 
@@ -642,7 +630,7 @@ get_map:
 	return EFI_SUCCESS;
 
 free_mem_map:
-	efi_free(sys_table, _size, (unsigned long)mem_map);
+	efi_call_phys1(sys_table->boottime->free_pool, mem_map);
 	return status;
 }
 
-- 
cgit v1.2.3


From 0e1cadb05bba2293b4575c8cab275313d181d94f Mon Sep 17 00:00:00 2001
From: Roy Franz
Date: Sun, 22 Sep 2013 15:45:38 -0700
Subject: efi: Allow efi_free() to be called with size of 0

Make efi_free() safely callable with size of 0, similar to free() being
callable with NULL pointers, and do nothing in that case.
Remove size checks that this makes redundant.  This also avoids some
size checks in the ARM EFI stub code that will be added as well.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/x86/boot/compressed/eboot.c       | 3 +--
 drivers/firmware/efi/efi-stub-helper.c | 3 +++
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index bf2c35d5ec1f..ef2181a96d09 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -506,8 +506,7 @@ struct boot_params *make_boot_params(void *handle, efi_system_table_t *_table)
 
 	return boot_params;
 fail2:
-	if (options_size)
-		efi_free(sys_table, options_size, hdr->cmd_line_ptr);
+	efi_free(sys_table, options_size, hdr->cmd_line_ptr);
 fail:
 	efi_free(sys_table, 0x4000, (unsigned long)boot_params);
 	return NULL;
diff --git a/drivers/firmware/efi/efi-stub-helper.c b/drivers/firmware/efi/efi-stub-helper.c
index b314bf720272..fda510fa3579 100644
--- a/drivers/firmware/efi/efi-stub-helper.c
+++ b/drivers/firmware/efi/efi-stub-helper.c
@@ -255,6 +255,9 @@ static void efi_free(efi_system_table_t *sys_table_arg, unsigned long size,
 {
 	unsigned long nr_pages;
 
+	if (!size)
+		return;
+
 	nr_pages = round_up(size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
 	efi_call_phys2(sys_table_arg->boottime->free_pages, addr, nr_pages);
 }
-- 
cgit v1.2.3


From 46f4582e7cbc5f30127183812d4da875782518f5 Mon Sep 17 00:00:00 2001
From: Roy Franz
Date: Sun, 22 Sep 2013 15:45:39 -0700
Subject: efi: Generalize handle_ramdisks() and rename to
 handle_cmdline_files().

The handle_cmdline_files now takes the option to handle as a string,
and returns the loaded data through parameters, rather than taking
an x86 specific setup_header structure.  For ARM, this will be used
to load a device tree blob in addition to initrd images.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/x86/boot/compressed/eboot.c       |  9 +++++-
 drivers/firmware/efi/efi-stub-helper.c | 51 ++++++++++++++++++++--------------
 2 files changed, 38 insertions(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index ef2181a96d09..beb07a4529ac 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -442,6 +442,8 @@ struct boot_params *make_boot_params(void *handle, efi_system_table_t *_table)
 	u16 *s2;
 	u8 *s1;
 	int i;
+	unsigned long ramdisk_addr;
+	unsigned long ramdisk_size;
 
 	sys_table = _table;
 
@@ -500,9 +502,14 @@ struct boot_params *make_boot_params(void *handle, efi_system_table_t *_table)
 
 	memset(sdt, 0, sizeof(*sdt));
 
-	status = handle_ramdisks(sys_table, image, hdr);
+	status = handle_cmdline_files(sys_table, image,
+				      (char *)(unsigned long)hdr->cmd_line_ptr,
+				      "initrd=", hdr->initrd_addr_max,
+				      &ramdisk_addr, &ramdisk_size);
 	if (status != EFI_SUCCESS)
 		goto fail2;
+	hdr->ramdisk_image = ramdisk_addr;
+	hdr->ramdisk_size = ramdisk_size;
 
 	return boot_params;
 fail2:
diff --git a/drivers/firmware/efi/efi-stub-helper.c b/drivers/firmware/efi/efi-stub-helper.c
index fda510fa3579..8c7839437c14 100644
--- a/drivers/firmware/efi/efi-stub-helper.c
+++ b/drivers/firmware/efi/efi-stub-helper.c
@@ -269,9 +269,12 @@ static void efi_free(efi_system_table_t *sys_table_arg, unsigned long size,
  * We only support loading an initrd from the same filesystem as the
  * kernel image.
  */
-static efi_status_t handle_ramdisks(efi_system_table_t *sys_table_arg,
-				    efi_loaded_image_t *image,
-				    struct setup_header *hdr)
+static efi_status_t handle_cmdline_files(efi_system_table_t *sys_table_arg,
+					 efi_loaded_image_t *image,
+					 char *cmd_line, char *option_string,
+					 unsigned long max_addr,
+					 unsigned long *load_addr,
+					 unsigned long *load_size)
 {
 	struct initrd *initrds;
 	unsigned long initrd_addr;
@@ -287,19 +290,25 @@ static efi_status_t handle_ramdisks(efi_system_table_t *sys_table_arg,
 	initrd_addr = 0;
 	initrd_total = 0;
 
-	str = (char *)(unsigned long)hdr->cmd_line_ptr;
+	str = cmd_line;
 
 	j = 0;			/* See close_handles */
 
+	if (!load_addr || !load_size)
+		return EFI_INVALID_PARAMETER;
+
+	*load_addr = 0;
+	*load_size = 0;
+
 	if (!str || !*str)
 		return EFI_SUCCESS;
 
 	for (nr_initrds = 0; *str; nr_initrds++) {
-		str = strstr(str, "initrd=");
+		str = strstr(str, option_string);
 		if (!str)
 			break;
 
-		str += 7;
+		str += strlen(option_string);
 
 		/* Skip any leading slashes */
 		while (*str == '/' || *str == '\\')
@@ -317,11 +326,11 @@ static efi_status_t handle_ramdisks(efi_system_table_t *sys_table_arg,
 				nr_initrds * sizeof(*initrds),
 				&initrds);
 	if (status != EFI_SUCCESS) {
-		efi_printk(sys_table_arg, "Failed to alloc mem for initrds\n");
+		efi_printk(sys_table_arg, "Failed to alloc mem for file load\n");
 		goto fail;
 	}
 
-	str = (char *)(unsigned long)hdr->cmd_line_ptr;
+	str = cmd_line;
 	for (i = 0; i < nr_initrds; i++) {
 		struct initrd *initrd;
 		efi_file_handle_t *h;
@@ -332,11 +341,11 @@ static efi_status_t handle_ramdisks(efi_system_table_t *sys_table_arg,
 		efi_char16_t *p;
 		u64 file_sz;
 
-		str = strstr(str, "initrd=");
+		str = strstr(str, option_string);
 		if (!str)
 			break;
 
-		str += 7;
+		str += strlen(option_string);
 
 		initrd = &initrds[i];
 		p = filename_16;
@@ -382,7 +391,7 @@ static efi_status_t handle_ramdisks(efi_system_table_t *sys_table_arg,
 		status = efi_call_phys5(fh->open, fh, &h, filename_16,
 					EFI_FILE_MODE_READ, (u64)0);
 		if (status != EFI_SUCCESS) {
-			efi_printk(sys_table_arg, "Failed to open initrd file: ");
+			efi_printk(sys_table_arg, "Failed to open file: ");
 			efi_char16_printk(sys_table_arg, filename_16);
 			efi_printk(sys_table_arg, "\n");
 			goto close_handles;
@@ -394,7 +403,7 @@ static efi_status_t handle_ramdisks(efi_system_table_t *sys_table_arg,
 		status = efi_call_phys4(h->get_info, h, &info_guid,
 					&info_sz, NULL);
 		if (status != EFI_BUFFER_TOO_SMALL) {
-			efi_printk(sys_table_arg, "Failed to get initrd info size\n");
+			efi_printk(sys_table_arg, "Failed to get file info size\n");
 			goto close_handles;
 		}
 
@@ -402,7 +411,7 @@ grow:
 		status = efi_call_phys3(sys_table_arg->boottime->allocate_pool,
 					EFI_LOADER_DATA, info_sz, &info);
 		if (status != EFI_SUCCESS) {
-			efi_printk(sys_table_arg, "Failed to alloc mem for initrd info\n");
+			efi_printk(sys_table_arg, "Failed to alloc mem for file info\n");
 			goto close_handles;
 		}
 
@@ -418,7 +427,7 @@ grow:
 		efi_call_phys1(sys_table_arg->boottime->free_pool, info);
 
 		if (status != EFI_SUCCESS) {
-			efi_printk(sys_table_arg, "Failed to get initrd info\n");
+			efi_printk(sys_table_arg, "Failed to get file info\n");
 			goto close_handles;
 		}
 
@@ -435,14 +444,14 @@ grow:
 		 * all the initrd's.
 		 */
 		status = efi_high_alloc(sys_table_arg, initrd_total, 0x1000,
-				    &initrd_addr, hdr->initrd_addr_max);
+				    &initrd_addr, max_addr);
 		if (status != EFI_SUCCESS) {
 			efi_printk(sys_table_arg, "Failed to alloc highmem for initrds\n");
 			goto close_handles;
 		}
 
 		/* We've run out of free low memory. */
-		if (initrd_addr > hdr->initrd_addr_max) {
+		if (initrd_addr > max_addr) {
 			efi_printk(sys_table_arg, "We've run out of free low memory\n");
 			status = EFI_INVALID_PARAMETER;
 			goto free_initrd_total;
@@ -463,7 +472,7 @@ grow:
 							initrds[j].handle,
 							&chunksize, addr);
 				if (status != EFI_SUCCESS) {
-					efi_printk(sys_table_arg, "Failed to read initrd\n");
+					efi_printk(sys_table_arg, "Failed to read file\n");
 					goto free_initrd_total;
 				}
 				addr += chunksize;
@@ -477,8 +486,8 @@ grow:
 
 	efi_call_phys1(sys_table_arg->boottime->free_pool, initrds);
 
-	hdr->ramdisk_image = initrd_addr;
-	hdr->ramdisk_size = initrd_total;
+	*load_addr = initrd_addr;
+	*load_size = initrd_total;
 
 	return status;
 
@@ -491,8 +500,8 @@ close_handles:
 free_initrds:
 	efi_call_phys1(sys_table_arg->boottime->free_pool, initrds);
 fail:
-	hdr->ramdisk_image = 0;
-	hdr->ramdisk_size = 0;
+	*load_addr = 0;
+	*load_size = 0;
 
 	return status;
 }
-- 
cgit v1.2.3


From 0c44c2d0f459cd7e275242b72f500137c4fa834d Mon Sep 17 00:00:00 2001
From: Peter Zijlstra
Date: Wed, 11 Sep 2013 15:19:24 +0200
Subject: x86: Use asm goto to implement better modify_and_test() functions

Linus suggested using asm goto to get rid of the typical SETcc + TEST
instruction pair -- which also clobbers an extra register -- for our
typical modify_and_test() functions.

Because asm goto doesn't allow output fields it has to include an
unconditinal memory clobber when it changes a memory variable to force
a reload.

Luckily all atomic ops already imply a compiler barrier to go along
with their memory barrier semantics.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-0mtn9siwbeo1d33bap1422se@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/include/asm/atomic.h      | 29 +++++----------------------
 arch/x86/include/asm/atomic64_64.h | 28 ++++----------------------
 arch/x86/include/asm/bitops.h      | 24 ++++------------------
 arch/x86/include/asm/local.h       | 28 ++++----------------------
 arch/x86/include/asm/rmwcc.h       | 41 ++++++++++++++++++++++++++++++++++++++
 5 files changed, 58 insertions(+), 92 deletions(-)
 create mode 100644 arch/x86/include/asm/rmwcc.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/atomic.h b/arch/x86/include/asm/atomic.h
index 722aa3b04624..da31c8b8a92d 100644
--- a/arch/x86/include/asm/atomic.h
+++ b/arch/x86/include/asm/atomic.h
@@ -6,6 +6,7 @@
 #include <asm/processor.h>
 #include <asm/alternative.h>
 #include <asm/cmpxchg.h>
+#include <asm/rmwcc.h>
 
 /*
  * Atomic operations that C can't guarantee us.  Useful for
@@ -76,12 +77,7 @@ static inline void atomic_sub(int i, atomic_t *v)
  */
 static inline int atomic_sub_and_test(int i, atomic_t *v)
 {
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "subl %2,%0; sete %1"
-		     : "+m" (v->counter), "=qm" (c)
-		     : "ir" (i) : "memory");
-	return c;
+	GEN_BINARY_RMWcc(LOCK_PREFIX "subl", v->counter, i, "%0", "e");
 }
 
 /**
@@ -118,12 +114,7 @@ static inline void atomic_dec(atomic_t *v)
  */
 static inline int atomic_dec_and_test(atomic_t *v)
 {
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "decl %0; sete %1"
-		     : "+m" (v->counter), "=qm" (c)
-		     : : "memory");
-	return c != 0;
+	GEN_UNARY_RMWcc(LOCK_PREFIX "decl", v->counter, "%0", "e");
 }
 
 /**
@@ -136,12 +127,7 @@ static inline int atomic_dec_and_test(atomic_t *v)
  */
 static inline int atomic_inc_and_test(atomic_t *v)
 {
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "incl %0; sete %1"
-		     : "+m" (v->counter), "=qm" (c)
-		     : : "memory");
-	return c != 0;
+	GEN_UNARY_RMWcc(LOCK_PREFIX "incl", v->counter, "%0", "e");
 }
 
 /**
@@ -155,12 +141,7 @@ static inline int atomic_inc_and_test(atomic_t *v)
  */
 static inline int atomic_add_negative(int i, atomic_t *v)
 {
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "addl %2,%0; sets %1"
-		     : "+m" (v->counter), "=qm" (c)
-		     : "ir" (i) : "memory");
-	return c;
+	GEN_BINARY_RMWcc(LOCK_PREFIX "addl", v->counter, i, "%0", "s");
 }
 
 /**
diff --git a/arch/x86/include/asm/atomic64_64.h b/arch/x86/include/asm/atomic64_64.h
index 0e1cbfc8ee06..3f065c985aee 100644
--- a/arch/x86/include/asm/atomic64_64.h
+++ b/arch/x86/include/asm/atomic64_64.h
@@ -72,12 +72,7 @@ static inline void atomic64_sub(long i, atomic64_t *v)
  */
 static inline int atomic64_sub_and_test(long i, atomic64_t *v)
 {
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "subq %2,%0; sete %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "er" (i), "m" (v->counter) : "memory");
-	return c;
+	GEN_BINARY_RMWcc(LOCK_PREFIX "subq", v->counter, i, "%0", "e");
 }
 
 /**
@@ -116,12 +111,7 @@ static inline void atomic64_dec(atomic64_t *v)
  */
 static inline int atomic64_dec_and_test(atomic64_t *v)
 {
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "decq %0; sete %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "m" (v->counter) : "memory");
-	return c != 0;
+	GEN_UNARY_RMWcc(LOCK_PREFIX "decq", v->counter, "%0", "e");
 }
 
 /**
@@ -134,12 +124,7 @@ static inline int atomic64_dec_and_test(atomic64_t *v)
  */
 static inline int atomic64_inc_and_test(atomic64_t *v)
 {
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "incq %0; sete %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "m" (v->counter) : "memory");
-	return c != 0;
+	GEN_UNARY_RMWcc(LOCK_PREFIX "incq", v->counter, "%0", "e");
 }
 
 /**
@@ -153,12 +138,7 @@ static inline int atomic64_inc_and_test(atomic64_t *v)
  */
 static inline int atomic64_add_negative(long i, atomic64_t *v)
 {
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "addq %2,%0; sets %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "er" (i), "m" (v->counter) : "memory");
-	return c;
+	GEN_BINARY_RMWcc(LOCK_PREFIX "addq", v->counter, i, "%0", "s");
 }
 
 /**
diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
index 41639ce8fd63..6d76d0935989 100644
--- a/arch/x86/include/asm/bitops.h
+++ b/arch/x86/include/asm/bitops.h
@@ -14,6 +14,7 @@
 
 #include <linux/compiler.h>
 #include <asm/alternative.h>
+#include <asm/rmwcc.h>
 
 #if BITS_PER_LONG == 32
 # define _BITOPS_LONG_SHIFT 5
@@ -204,12 +205,7 @@ static inline void change_bit(long nr, volatile unsigned long *addr)
  */
 static inline int test_and_set_bit(long nr, volatile unsigned long *addr)
 {
-	int oldbit;
-
-	asm volatile(LOCK_PREFIX "bts %2,%1\n\t"
-		     "sbb %0,%0" : "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
-
-	return oldbit;
+	GEN_BINARY_RMWcc(LOCK_PREFIX "bts", *addr, nr, "%0", "c");
 }
 
 /**
@@ -255,13 +251,7 @@ static inline int __test_and_set_bit(long nr, volatile unsigned long *addr)
  */
 static inline int test_and_clear_bit(long nr, volatile unsigned long *addr)
 {
-	int oldbit;
-
-	asm volatile(LOCK_PREFIX "btr %2,%1\n\t"
-		     "sbb %0,%0"
-		     : "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
-
-	return oldbit;
+	GEN_BINARY_RMWcc(LOCK_PREFIX "btr", *addr, nr, "%0", "c");
 }
 
 /**
@@ -314,13 +304,7 @@ static inline int __test_and_change_bit(long nr, volatile unsigned long *addr)
  */
 static inline int test_and_change_bit(long nr, volatile unsigned long *addr)
 {
-	int oldbit;
-
-	asm volatile(LOCK_PREFIX "btc %2,%1\n\t"
-		     "sbb %0,%0"
-		     : "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
-
-	return oldbit;
+	GEN_BINARY_RMWcc(LOCK_PREFIX "btc", *addr, nr, "%0", "c");
 }
 
 static __always_inline int constant_test_bit(long nr, const volatile unsigned long *addr)
diff --git a/arch/x86/include/asm/local.h b/arch/x86/include/asm/local.h
index 2d89e3980cbd..5b23e605e707 100644
--- a/arch/x86/include/asm/local.h
+++ b/arch/x86/include/asm/local.h
@@ -52,12 +52,7 @@ static inline void local_sub(long i, local_t *l)
  */
 static inline int local_sub_and_test(long i, local_t *l)
 {
-	unsigned char c;
-
-	asm volatile(_ASM_SUB "%2,%0; sete %1"
-		     : "+m" (l->a.counter), "=qm" (c)
-		     : "ir" (i) : "memory");
-	return c;
+	GEN_BINARY_RMWcc(_ASM_SUB, l->a.counter, i, "%0", "e");
 }
 
 /**
@@ -70,12 +65,7 @@ static inline int local_sub_and_test(long i, local_t *l)
  */
 static inline int local_dec_and_test(local_t *l)
 {
-	unsigned char c;
-
-	asm volatile(_ASM_DEC "%0; sete %1"
-		     : "+m" (l->a.counter), "=qm" (c)
-		     : : "memory");
-	return c != 0;
+	GEN_UNARY_RMWcc(_ASM_DEC, l->a.counter, "%0", "e");
 }
 
 /**
@@ -88,12 +78,7 @@ static inline int local_dec_and_test(local_t *l)
  */
 static inline int local_inc_and_test(local_t *l)
 {
-	unsigned char c;
-
-	asm volatile(_ASM_INC "%0; sete %1"
-		     : "+m" (l->a.counter), "=qm" (c)
-		     : : "memory");
-	return c != 0;
+	GEN_UNARY_RMWcc(_ASM_INC, l->a.counter, "%0", "e");
 }
 
 /**
@@ -107,12 +92,7 @@ static inline int local_inc_and_test(local_t *l)
  */
 static inline int local_add_negative(long i, local_t *l)
 {
-	unsigned char c;
-
-	asm volatile(_ASM_ADD "%2,%0; sets %1"
-		     : "+m" (l->a.counter), "=qm" (c)
-		     : "ir" (i) : "memory");
-	return c;
+	GEN_BINARY_RMWcc(_ASM_ADD, l->a.counter, i, "%0", "s");
 }
 
 /**
diff --git a/arch/x86/include/asm/rmwcc.h b/arch/x86/include/asm/rmwcc.h
new file mode 100644
index 000000000000..735f1849795f
--- /dev/null
+++ b/arch/x86/include/asm/rmwcc.h
@@ -0,0 +1,41 @@
+#ifndef _ASM_X86_RMWcc
+#define _ASM_X86_RMWcc
+
+#ifdef CC_HAVE_ASM_GOTO
+
+#define __GEN_RMWcc(fullop, var, cc, ...)				\
+do {									\
+	asm volatile goto (fullop "; j" cc " %l[cc_label]"		\
+			: : "m" (var), ## __VA_ARGS__ 			\
+			: "memory" : cc_label);				\
+	return 0;							\
+cc_label:								\
+	return 1;							\
+} while (0)
+
+#define GEN_UNARY_RMWcc(op, var, arg0, cc) 				\
+	__GEN_RMWcc(op " " arg0, var, cc)
+
+#define GEN_BINARY_RMWcc(op, var, val, arg0, cc)			\
+	__GEN_RMWcc(op " %1, " arg0, var, cc, "er" (val))
+
+#else /* !CC_HAVE_ASM_GOTO */
+
+#define __GEN_RMWcc(fullop, var, cc, ...)				\
+do {									\
+	char c;								\
+	asm volatile (fullop "; set" cc " %1"				\
+			: "+m" (var), "=qm" (c)				\
+			: __VA_ARGS__ : "memory");			\
+	return c != 0;							\
+} while (0)
+
+#define GEN_UNARY_RMWcc(op, var, arg0, cc)				\
+	__GEN_RMWcc(op " " arg0, var, cc)
+
+#define GEN_BINARY_RMWcc(op, var, val, arg0, cc)			\
+	__GEN_RMWcc(op " %2, " arg0, var, cc, "er" (val))
+
+#endif /* CC_HAVE_ASM_GOTO */
+
+#endif /* _ASM_X86_RMWcc */
-- 
cgit v1.2.3


From ea8117478918a4734586d35ff530721b682425be Mon Sep 17 00:00:00 2001
From: Peter Zijlstra
Date: Wed, 11 Sep 2013 12:43:13 +0200
Subject: sched, idle: Fix the idle polling state logic

Mike reported that commit 7d1a9417 ("x86: Use generic idle loop")
regressed several workloads and caused excessive reschedule
interrupts.

The patch in question failed to notice that the x86 code had an
inverted sense of the polling state versus the new generic code (x86:
default polling, generic: default !polling).

Fix the two prominent x86 mwait based idle drivers and introduce a few
new generic polling helpers (fixing the wrong smp_mb__after_clear_bit
usage).

Also switch the idle routines to using tif_need_resched() which is an
immediate TIF_NEED_RESCHED test as opposed to need_resched which will
end up being slightly different.

Reported-by: Mike Galbraith <bitbucket@online.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: lenb@kernel.org
Cc: tglx@linutronix.de
Link: http://lkml.kernel.org/n/tip-nc03imb0etuefmzybzj7sprf@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/process.c     |  6 ++--
 drivers/acpi/processor_idle.c | 46 ++++++-------------------
 drivers/idle/intel_idle.c     |  2 +-
 include/linux/sched.h         | 78 +++++++++++++++++++++++++++++++++++++++----
 include/linux/thread_info.h   |  2 ++
 kernel/cpu/idle.c             |  9 +++--
 6 files changed, 91 insertions(+), 52 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index c83516be1052..3fb8d95ab8b5 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -391,9 +391,9 @@ static void amd_e400_idle(void)
 		 * The switch back from broadcast mode needs to be
 		 * called with interrupts disabled.
 		 */
-		 local_irq_disable();
-		 clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
-		 local_irq_enable();
+		local_irq_disable();
+		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
+		local_irq_enable();
 	} else
 		default_idle();
 }
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index f98dd00b51a9..c7414a545a4f 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -119,17 +119,10 @@ static struct dmi_system_id processor_power_dmi_table[] = {
  */
 static void acpi_safe_halt(void)
 {
-	current_thread_info()->status &= ~TS_POLLING;
-	/*
-	 * TS_POLLING-cleared state must be visible before we
-	 * test NEED_RESCHED:
-	 */
-	smp_mb();
-	if (!need_resched()) {
+	if (!tif_need_resched()) {
 		safe_halt();
 		local_irq_disable();
 	}
-	current_thread_info()->status |= TS_POLLING;
 }
 
 #ifdef ARCH_APICTIMER_STOPS_ON_C3
@@ -737,6 +730,11 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,
 	if (unlikely(!pr))
 		return -EINVAL;
 
+	if (cx->entry_method == ACPI_CSTATE_FFH) {
+		if (current_set_polling_and_test())
+			return -EINVAL;
+	}
+
 	lapic_timer_state_broadcast(pr, cx, 1);
 	acpi_idle_do_entry(cx);
 
@@ -790,18 +788,9 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
 	if (unlikely(!pr))
 		return -EINVAL;
 
-	if (cx->entry_method != ACPI_CSTATE_FFH) {
-		current_thread_info()->status &= ~TS_POLLING;
-		/*
-		 * TS_POLLING-cleared state must be visible before we test
-		 * NEED_RESCHED:
-		 */
-		smp_mb();
-
-		if (unlikely(need_resched())) {
-			current_thread_info()->status |= TS_POLLING;
+	if (cx->entry_method == ACPI_CSTATE_FFH) {
+		if (current_set_polling_and_test())
 			return -EINVAL;
-		}
 	}
 
 	/*
@@ -819,9 +808,6 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
 
 	sched_clock_idle_wakeup_event(0);
 
-	if (cx->entry_method != ACPI_CSTATE_FFH)
-		current_thread_info()->status |= TS_POLLING;
-
 	lapic_timer_state_broadcast(pr, cx, 0);
 	return index;
 }
@@ -858,18 +844,9 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 		}
 	}
 
-	if (cx->entry_method != ACPI_CSTATE_FFH) {
-		current_thread_info()->status &= ~TS_POLLING;
-		/*
-		 * TS_POLLING-cleared state must be visible before we test
-		 * NEED_RESCHED:
-		 */
-		smp_mb();
-
-		if (unlikely(need_resched())) {
-			current_thread_info()->status |= TS_POLLING;
+	if (cx->entry_method == ACPI_CSTATE_FFH) {
+		if (current_set_polling_and_test())
 			return -EINVAL;
-		}
 	}
 
 	acpi_unlazy_tlb(smp_processor_id());
@@ -915,9 +892,6 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 
 	sched_clock_idle_wakeup_event(0);
 
-	if (cx->entry_method != ACPI_CSTATE_FFH)
-		current_thread_info()->status |= TS_POLLING;
-
 	lapic_timer_state_broadcast(pr, cx, 0);
 	return index;
 }
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index fa6964d8681a..f116d664b473 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -359,7 +359,7 @@ static int intel_idle(struct cpuidle_device *dev,
 	if (!(lapic_timer_reliable_states & (1 << (cstate))))
 		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
 
-	if (!need_resched()) {
+	if (!current_set_polling_and_test()) {
 
 		__monitor((void *)&current_thread_info()->flags, 0, 0);
 		smp_mb();
diff --git a/include/linux/sched.h b/include/linux/sched.h
index b5344de1658b..e783ec52295a 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -2479,34 +2479,98 @@ static inline int tsk_is_polling(struct task_struct *p)
 {
 	return task_thread_info(p)->status & TS_POLLING;
 }
-static inline void current_set_polling(void)
+static inline void __current_set_polling(void)
 {
 	current_thread_info()->status |= TS_POLLING;
 }
 
-static inline void current_clr_polling(void)
+static inline bool __must_check current_set_polling_and_test(void)
+{
+	__current_set_polling();
+
+	/*
+	 * Polling state must be visible before we test NEED_RESCHED,
+	 * paired by resched_task()
+	 */
+	smp_mb();
+
+	return unlikely(tif_need_resched());
+}
+
+static inline void __current_clr_polling(void)
 {
 	current_thread_info()->status &= ~TS_POLLING;
-	smp_mb__after_clear_bit();
+}
+
+static inline bool __must_check current_clr_polling_and_test(void)
+{
+	__current_clr_polling();
+
+	/*
+	 * Polling state must be visible before we test NEED_RESCHED,
+	 * paired by resched_task()
+	 */
+	smp_mb();
+
+	return unlikely(tif_need_resched());
 }
 #elif defined(TIF_POLLING_NRFLAG)
 static inline int tsk_is_polling(struct task_struct *p)
 {
 	return test_tsk_thread_flag(p, TIF_POLLING_NRFLAG);
 }
-static inline void current_set_polling(void)
+
+static inline void __current_set_polling(void)
 {
 	set_thread_flag(TIF_POLLING_NRFLAG);
 }
 
-static inline void current_clr_polling(void)
+static inline bool __must_check current_set_polling_and_test(void)
+{
+	__current_set_polling();
+
+	/*
+	 * Polling state must be visible before we test NEED_RESCHED,
+	 * paired by resched_task()
+	 *
+	 * XXX: assumes set/clear bit are identical barrier wise.
+	 */
+	smp_mb__after_clear_bit();
+
+	return unlikely(tif_need_resched());
+}
+
+static inline void __current_clr_polling(void)
 {
 	clear_thread_flag(TIF_POLLING_NRFLAG);
 }
+
+static inline bool __must_check current_clr_polling_and_test(void)
+{
+	__current_clr_polling();
+
+	/*
+	 * Polling state must be visible before we test NEED_RESCHED,
+	 * paired by resched_task()
+	 */
+	smp_mb__after_clear_bit();
+
+	return unlikely(tif_need_resched());
+}
+
 #else
 static inline int tsk_is_polling(struct task_struct *p) { return 0; }
-static inline void current_set_polling(void) { }
-static inline void current_clr_polling(void) { }
+static inline void __current_set_polling(void) { }
+static inline void __current_clr_polling(void) { }
+
+static inline bool __must_check current_set_polling_and_test(void)
+{
+	return unlikely(tif_need_resched());
+}
+static inline bool __must_check current_clr_polling_and_test(void)
+{
+	return unlikely(tif_need_resched());
+}
 #endif
 
 /*
diff --git a/include/linux/thread_info.h b/include/linux/thread_info.h
index a629e4b23217..fddbe2023a5d 100644
--- a/include/linux/thread_info.h
+++ b/include/linux/thread_info.h
@@ -118,6 +118,8 @@ static inline __deprecated void set_need_resched(void)
 	 */
 }
 
+#define tif_need_resched() test_thread_flag(TIF_NEED_RESCHED)
+
 #if defined TIF_RESTORE_SIGMASK && !defined HAVE_SET_RESTORE_SIGMASK
 /*
  * An arch can define its own version of set_restore_sigmask() to get the
diff --git a/kernel/cpu/idle.c b/kernel/cpu/idle.c
index e695c0a0bcb5..c261409500e4 100644
--- a/kernel/cpu/idle.c
+++ b/kernel/cpu/idle.c
@@ -44,7 +44,7 @@ static inline int cpu_idle_poll(void)
 	rcu_idle_enter();
 	trace_cpu_idle_rcuidle(0, smp_processor_id());
 	local_irq_enable();
-	while (!need_resched())
+	while (!tif_need_resched())
 		cpu_relax();
 	trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
 	rcu_idle_exit();
@@ -92,8 +92,7 @@ static void cpu_idle_loop(void)
 			if (cpu_idle_force_poll || tick_check_broadcast_expired()) {
 				cpu_idle_poll();
 			} else {
-				current_clr_polling();
-				if (!need_resched()) {
+				if (!current_clr_polling_and_test()) {
 					stop_critical_timings();
 					rcu_idle_enter();
 					arch_cpu_idle();
@@ -103,7 +102,7 @@ static void cpu_idle_loop(void)
 				} else {
 					local_irq_enable();
 				}
-				current_set_polling();
+				__current_set_polling();
 			}
 			arch_cpu_idle_exit();
 		}
@@ -129,7 +128,7 @@ void cpu_startup_entry(enum cpuhp_state state)
 	 */
 	boot_init_stack_canary();
 #endif
-	current_set_polling();
+	__current_set_polling();
 	arch_cpu_idle_prepare();
 	cpu_idle_loop();
 }
-- 
cgit v1.2.3


From a787870924dbd6f321661e06d4ec1c7a408c9ccf Mon Sep 17 00:00:00 2001
From: Peter Zijlstra
Date: Wed, 14 Aug 2013 14:55:40 +0200
Subject: sched, arch: Create asm/preempt.h

In order to prepare to per-arch implementations of preempt_count move
the required bits into an asm-generic header and use this for all
archs.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-h5j0c1r3e3fk015m30h8f1zx@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/alpha/include/asm/Kbuild      |  1 +
 arch/arc/include/asm/Kbuild        |  1 +
 arch/arm/include/asm/Kbuild        |  1 +
 arch/arm64/include/asm/Kbuild      |  1 +
 arch/avr32/include/asm/Kbuild      |  1 +
 arch/blackfin/include/asm/Kbuild   |  1 +
 arch/c6x/include/asm/Kbuild        |  1 +
 arch/cris/include/asm/Kbuild       |  1 +
 arch/frv/include/asm/Kbuild        |  1 +
 arch/h8300/include/asm/Kbuild      |  1 +
 arch/hexagon/include/asm/Kbuild    |  1 +
 arch/ia64/include/asm/Kbuild       |  1 +
 arch/m32r/include/asm/Kbuild       |  1 +
 arch/m68k/include/asm/Kbuild       |  1 +
 arch/metag/include/asm/Kbuild      |  1 +
 arch/microblaze/include/asm/Kbuild |  1 +
 arch/mips/include/asm/Kbuild       |  1 +
 arch/mn10300/include/asm/Kbuild    |  1 +
 arch/openrisc/include/asm/Kbuild   |  1 +
 arch/parisc/include/asm/Kbuild     |  1 +
 arch/powerpc/include/asm/Kbuild    |  1 +
 arch/s390/include/asm/Kbuild       |  1 +
 arch/score/include/asm/Kbuild      |  1 +
 arch/sh/include/asm/Kbuild         |  1 +
 arch/sparc/include/asm/Kbuild      |  1 +
 arch/tile/include/asm/Kbuild       |  1 +
 arch/um/include/asm/Kbuild         |  1 +
 arch/unicore32/include/asm/Kbuild  |  1 +
 arch/x86/include/asm/Kbuild        |  1 +
 arch/xtensa/include/asm/Kbuild     |  1 +
 include/asm-generic/preempt.h      | 54 ++++++++++++++++++++++++++++++++++++++
 include/linux/preempt.h            | 49 +---------------------------------
 32 files changed, 85 insertions(+), 48 deletions(-)
 create mode 100644 include/asm-generic/preempt.h

(limited to 'arch')

diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild
index a6e85f448c1c..f01fb505ad52 100644
--- a/arch/alpha/include/asm/Kbuild
+++ b/arch/alpha/include/asm/Kbuild
@@ -3,3 +3,4 @@ generic-y += clkdev.h
 
 generic-y += exec.h
 generic-y += trace_clock.h
+generic-y += preempt.h
diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild
index d8dd660898b9..5943f7f9d325 100644
--- a/arch/arc/include/asm/Kbuild
+++ b/arch/arc/include/asm/Kbuild
@@ -46,3 +46,4 @@ generic-y += ucontext.h
 generic-y += user.h
 generic-y += vga.h
 generic-y += xor.h
+generic-y += preempt.h
diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
index d3db39860b9c..4e6838d4ddf6 100644
--- a/arch/arm/include/asm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
@@ -33,3 +33,4 @@ generic-y += timex.h
 generic-y += trace_clock.h
 generic-y += types.h
 generic-y += unaligned.h
+generic-y += preempt.h
diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild
index 79a642d199f2..519f89f5b6a3 100644
--- a/arch/arm64/include/asm/Kbuild
+++ b/arch/arm64/include/asm/Kbuild
@@ -50,3 +50,4 @@ generic-y += unaligned.h
 generic-y += user.h
 generic-y += vga.h
 generic-y += xor.h
+generic-y += preempt.h
diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild
index d22af851f3f6..b946080ee8bb 100644
--- a/arch/avr32/include/asm/Kbuild
+++ b/arch/avr32/include/asm/Kbuild
@@ -3,3 +3,4 @@ generic-y	+= clkdev.h
 generic-y	+= exec.h
 generic-y	+= trace_clock.h
 generic-y	+= param.h
+generic-y += preempt.h
diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild
index 127826f8a375..f2b43474b0e2 100644
--- a/arch/blackfin/include/asm/Kbuild
+++ b/arch/blackfin/include/asm/Kbuild
@@ -44,3 +44,4 @@ generic-y += ucontext.h
 generic-y += unaligned.h
 generic-y += user.h
 generic-y += xor.h
+generic-y += preempt.h
diff --git a/arch/c6x/include/asm/Kbuild b/arch/c6x/include/asm/Kbuild
index e49f918531ad..fc0b3c356027 100644
--- a/arch/c6x/include/asm/Kbuild
+++ b/arch/c6x/include/asm/Kbuild
@@ -56,3 +56,4 @@ generic-y += ucontext.h
 generic-y += user.h
 generic-y += vga.h
 generic-y += xor.h
+generic-y += preempt.h
diff --git a/arch/cris/include/asm/Kbuild b/arch/cris/include/asm/Kbuild
index c8325455520e..b06caf649a95 100644
--- a/arch/cris/include/asm/Kbuild
+++ b/arch/cris/include/asm/Kbuild
@@ -11,3 +11,4 @@ generic-y += module.h
 generic-y += trace_clock.h
 generic-y += vga.h
 generic-y += xor.h
+generic-y += preempt.h
diff --git a/arch/frv/include/asm/Kbuild b/arch/frv/include/asm/Kbuild
index c5d767028306..74742dc6a3da 100644
--- a/arch/frv/include/asm/Kbuild
+++ b/arch/frv/include/asm/Kbuild
@@ -2,3 +2,4 @@
 generic-y += clkdev.h
 generic-y += exec.h
 generic-y += trace_clock.h
+generic-y += preempt.h
diff --git a/arch/h8300/include/asm/Kbuild b/arch/h8300/include/asm/Kbuild
index 8ada3cf0c98d..7e0e7213a481 100644
--- a/arch/h8300/include/asm/Kbuild
+++ b/arch/h8300/include/asm/Kbuild
@@ -6,3 +6,4 @@ generic-y += mmu.h
 generic-y += module.h
 generic-y += trace_clock.h
 generic-y += xor.h
+generic-y += preempt.h
diff --git a/arch/hexagon/include/asm/Kbuild b/arch/hexagon/include/asm/Kbuild
index 1da17caac23c..67c3450309b7 100644
--- a/arch/hexagon/include/asm/Kbuild
+++ b/arch/hexagon/include/asm/Kbuild
@@ -53,3 +53,4 @@ generic-y += types.h
 generic-y += ucontext.h
 generic-y += unaligned.h
 generic-y += xor.h
+generic-y += preempt.h
diff --git a/arch/ia64/include/asm/Kbuild b/arch/ia64/include/asm/Kbuild
index a3456f34f672..f93ee087e8fe 100644
--- a/arch/ia64/include/asm/Kbuild
+++ b/arch/ia64/include/asm/Kbuild
@@ -3,4 +3,5 @@ generic-y += clkdev.h
 generic-y += exec.h
 generic-y += kvm_para.h
 generic-y += trace_clock.h
+generic-y += preempt.h
 generic-y += vtime.h
\ No newline at end of file
diff --git a/arch/m32r/include/asm/Kbuild b/arch/m32r/include/asm/Kbuild
index bebdc36ebb0a..2b58c5f0bc38 100644
--- a/arch/m32r/include/asm/Kbuild
+++ b/arch/m32r/include/asm/Kbuild
@@ -3,3 +3,4 @@ generic-y += clkdev.h
 generic-y += exec.h
 generic-y += module.h
 generic-y += trace_clock.h
+generic-y += preempt.h
diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild
index 09d77a862da3..a5d27f272a59 100644
--- a/arch/m68k/include/asm/Kbuild
+++ b/arch/m68k/include/asm/Kbuild
@@ -31,3 +31,4 @@ generic-y += trace_clock.h
 generic-y += types.h
 generic-y += word-at-a-time.h
 generic-y += xor.h
+generic-y += preempt.h
diff --git a/arch/metag/include/asm/Kbuild b/arch/metag/include/asm/Kbuild
index 6ae0ccb632cb..84d0c1d6b9b3 100644
--- a/arch/metag/include/asm/Kbuild
+++ b/arch/metag/include/asm/Kbuild
@@ -52,3 +52,4 @@ generic-y += unaligned.h
 generic-y += user.h
 generic-y += vga.h
 generic-y += xor.h
+generic-y += preempt.h
diff --git a/arch/microblaze/include/asm/Kbuild b/arch/microblaze/include/asm/Kbuild
index d3c51a6a601d..ce0bbf8f5640 100644
--- a/arch/microblaze/include/asm/Kbuild
+++ b/arch/microblaze/include/asm/Kbuild
@@ -3,3 +3,4 @@ generic-y += clkdev.h
 generic-y += exec.h
 generic-y += trace_clock.h
 generic-y += syscalls.h
+generic-y += preempt.h
diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild
index 454ddf9bb76f..1acbb8b77a71 100644
--- a/arch/mips/include/asm/Kbuild
+++ b/arch/mips/include/asm/Kbuild
@@ -11,5 +11,6 @@ generic-y += sections.h
 generic-y += segment.h
 generic-y += serial.h
 generic-y += trace_clock.h
+generic-y += preempt.h
 generic-y += ucontext.h
 generic-y += xor.h
diff --git a/arch/mn10300/include/asm/Kbuild b/arch/mn10300/include/asm/Kbuild
index c5d767028306..74742dc6a3da 100644
--- a/arch/mn10300/include/asm/Kbuild
+++ b/arch/mn10300/include/asm/Kbuild
@@ -2,3 +2,4 @@
 generic-y += clkdev.h
 generic-y += exec.h
 generic-y += trace_clock.h
+generic-y += preempt.h
diff --git a/arch/openrisc/include/asm/Kbuild b/arch/openrisc/include/asm/Kbuild
index 195653e851da..78405625e799 100644
--- a/arch/openrisc/include/asm/Kbuild
+++ b/arch/openrisc/include/asm/Kbuild
@@ -67,3 +67,4 @@ generic-y += ucontext.h
 generic-y += user.h
 generic-y += word-at-a-time.h
 generic-y += xor.h
+generic-y += preempt.h
diff --git a/arch/parisc/include/asm/Kbuild b/arch/parisc/include/asm/Kbuild
index ff4c9faed546..a603b9ebe54c 100644
--- a/arch/parisc/include/asm/Kbuild
+++ b/arch/parisc/include/asm/Kbuild
@@ -4,3 +4,4 @@ generic-y += word-at-a-time.h auxvec.h user.h cputime.h emergency-restart.h \
 	  div64.h irq_regs.h kdebug.h kvm_para.h local64.h local.h param.h \
 	  poll.h xor.h clkdev.h exec.h
 generic-y += trace_clock.h
+generic-y += preempt.h
diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild
index 704e6f10ae80..d8f9d2f18a23 100644
--- a/arch/powerpc/include/asm/Kbuild
+++ b/arch/powerpc/include/asm/Kbuild
@@ -2,4 +2,5 @@
 generic-y += clkdev.h
 generic-y += rwsem.h
 generic-y += trace_clock.h
+generic-y += preempt.h
 generic-y += vtime.h
\ No newline at end of file
diff --git a/arch/s390/include/asm/Kbuild b/arch/s390/include/asm/Kbuild
index f313f9cbcf44..7a5288f3479a 100644
--- a/arch/s390/include/asm/Kbuild
+++ b/arch/s390/include/asm/Kbuild
@@ -2,3 +2,4 @@
 
 generic-y += clkdev.h
 generic-y += trace_clock.h
+generic-y += preempt.h
diff --git a/arch/score/include/asm/Kbuild b/arch/score/include/asm/Kbuild
index e1c7bb999b06..f3414ade77a3 100644
--- a/arch/score/include/asm/Kbuild
+++ b/arch/score/include/asm/Kbuild
@@ -4,3 +4,4 @@ header-y +=
 generic-y += clkdev.h
 generic-y += trace_clock.h
 generic-y += xor.h
+generic-y += preempt.h
diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
index 280bea9e5e2b..231efbb68108 100644
--- a/arch/sh/include/asm/Kbuild
+++ b/arch/sh/include/asm/Kbuild
@@ -34,3 +34,4 @@ generic-y += termios.h
 generic-y += trace_clock.h
 generic-y += ucontext.h
 generic-y += xor.h
+generic-y += preempt.h
diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild
index 7e4a97fbded4..bf390667657a 100644
--- a/arch/sparc/include/asm/Kbuild
+++ b/arch/sparc/include/asm/Kbuild
@@ -16,3 +16,4 @@ generic-y += serial.h
 generic-y += trace_clock.h
 generic-y += types.h
 generic-y += word-at-a-time.h
+generic-y += preempt.h
diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild
index 664d6ad23f80..22f3bd147fa7 100644
--- a/arch/tile/include/asm/Kbuild
+++ b/arch/tile/include/asm/Kbuild
@@ -38,3 +38,4 @@ generic-y += termios.h
 generic-y += trace_clock.h
 generic-y += types.h
 generic-y += xor.h
+generic-y += preempt.h
diff --git a/arch/um/include/asm/Kbuild b/arch/um/include/asm/Kbuild
index b30f34a79882..fdde187e6087 100644
--- a/arch/um/include/asm/Kbuild
+++ b/arch/um/include/asm/Kbuild
@@ -3,3 +3,4 @@ generic-y += hw_irq.h irq_regs.h kdebug.h percpu.h sections.h topology.h xor.h
 generic-y += ftrace.h pci.h io.h param.h delay.h mutex.h current.h exec.h
 generic-y += switch_to.h clkdev.h
 generic-y += trace_clock.h
+generic-y += preempt.h
diff --git a/arch/unicore32/include/asm/Kbuild b/arch/unicore32/include/asm/Kbuild
index 89d8b6c4e39a..00045cbe5c63 100644
--- a/arch/unicore32/include/asm/Kbuild
+++ b/arch/unicore32/include/asm/Kbuild
@@ -60,3 +60,4 @@ generic-y += unaligned.h
 generic-y += user.h
 generic-y += vga.h
 generic-y += xor.h
+generic-y += preempt.h
diff --git a/arch/x86/include/asm/Kbuild b/arch/x86/include/asm/Kbuild
index 7f669853317a..eca20286a91c 100644
--- a/arch/x86/include/asm/Kbuild
+++ b/arch/x86/include/asm/Kbuild
@@ -5,3 +5,4 @@ genhdr-y += unistd_64.h
 genhdr-y += unistd_x32.h
 
 generic-y += clkdev.h
+generic-y += preempt.h
diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild
index 1b982641ec35..228d6aee3a16 100644
--- a/arch/xtensa/include/asm/Kbuild
+++ b/arch/xtensa/include/asm/Kbuild
@@ -28,3 +28,4 @@ generic-y += termios.h
 generic-y += topology.h
 generic-y += trace_clock.h
 generic-y += xor.h
+generic-y += preempt.h
diff --git a/include/asm-generic/preempt.h b/include/asm-generic/preempt.h
new file mode 100644
index 000000000000..a1fc6590a743
--- /dev/null
+++ b/include/asm-generic/preempt.h
@@ -0,0 +1,54 @@
+#ifndef __ASM_PREEMPT_H
+#define __ASM_PREEMPT_H
+
+#include <linux/thread_info.h>
+
+/*
+ * We mask the PREEMPT_NEED_RESCHED bit so as not to confuse all current users
+ * that think a non-zero value indicates we cannot preempt.
+ */
+static __always_inline int preempt_count(void)
+{
+	return current_thread_info()->preempt_count & ~PREEMPT_NEED_RESCHED;
+}
+
+static __always_inline int *preempt_count_ptr(void)
+{
+	return &current_thread_info()->preempt_count;
+}
+
+/*
+ * We now loose PREEMPT_NEED_RESCHED and cause an extra reschedule; however the
+ * alternative is loosing a reschedule. Better schedule too often -- also this
+ * should be a very rare operation.
+ */
+static __always_inline void preempt_count_set(int pc)
+{
+	*preempt_count_ptr() = pc;
+}
+
+/*
+ * We fold the NEED_RESCHED bit into the preempt count such that
+ * preempt_enable() can decrement and test for needing to reschedule with a
+ * single instruction.
+ *
+ * We invert the actual bit, so that when the decrement hits 0 we know we both
+ * need to resched (the bit is cleared) and can resched (no preempt count).
+ */
+
+static __always_inline void set_preempt_need_resched(void)
+{
+	*preempt_count_ptr() &= ~PREEMPT_NEED_RESCHED;
+}
+
+static __always_inline void clear_preempt_need_resched(void)
+{
+	*preempt_count_ptr() |= PREEMPT_NEED_RESCHED;
+}
+
+static __always_inline bool test_preempt_need_resched(void)
+{
+	return !(*preempt_count_ptr() & PREEMPT_NEED_RESCHED);
+}
+
+#endif /* __ASM_PREEMPT_H */
diff --git a/include/linux/preempt.h b/include/linux/preempt.h
index 92e341853e4b..df8e245e8729 100644
--- a/include/linux/preempt.h
+++ b/include/linux/preempt.h
@@ -6,7 +6,6 @@
  * preempt_count (used for kernel preemption, interrupt count, etc.)
  */
 
-#include <linux/thread_info.h>
 #include <linux/linkage.h>
 #include <linux/list.h>
 
@@ -16,53 +15,7 @@
  */
 #define PREEMPT_NEED_RESCHED	0x80000000
 
-/*
- * We mask the PREEMPT_NEED_RESCHED bit so as not to confuse all current users
- * that think a non-zero value indicates we cannot preempt.
- */
-static __always_inline int preempt_count(void)
-{
-	return current_thread_info()->preempt_count & ~PREEMPT_NEED_RESCHED;
-}
-
-static __always_inline int *preempt_count_ptr(void)
-{
-	return &current_thread_info()->preempt_count;
-}
-
-/*
- * We now loose PREEMPT_NEED_RESCHED and cause an extra reschedule; however the
- * alternative is loosing a reschedule. Better schedule too often -- also this
- * should be a very rare operation.
- */
-static __always_inline void preempt_count_set(int pc)
-{
-	*preempt_count_ptr() = pc;
-}
-
-/*
- * We fold the NEED_RESCHED bit into the preempt count such that
- * preempt_enable() can decrement and test for needing to reschedule with a
- * single instruction.
- *
- * We invert the actual bit, so that when the decrement hits 0 we know we both
- * need to resched (the bit is cleared) and can resched (no preempt count).
- */
-
-static __always_inline void set_preempt_need_resched(void)
-{
-	*preempt_count_ptr() &= ~PREEMPT_NEED_RESCHED;
-}
-
-static __always_inline void clear_preempt_need_resched(void)
-{
-	*preempt_count_ptr() |= PREEMPT_NEED_RESCHED;
-}
-
-static __always_inline bool test_preempt_need_resched(void)
-{
-	return !(*preempt_count_ptr() & PREEMPT_NEED_RESCHED);
-}
+#include <asm/preempt.h>
 
 #if defined(CONFIG_DEBUG_PREEMPT) || defined(CONFIG_PREEMPT_TRACER)
   extern void add_preempt_count(int val);
-- 
cgit v1.2.3


From bdb43806589096ac4272fe1307e789846ac08d7c Mon Sep 17 00:00:00 2001
From: Peter Zijlstra
Date: Tue, 10 Sep 2013 12:15:23 +0200
Subject: sched: Extract the basic add/sub preempt_count modifiers

Rewrite the preempt_count macros in order to extract the 3 basic
preempt_count value modifiers:

  __preempt_count_add()
  __preempt_count_sub()

and the new:

  __preempt_count_dec_and_test()

And since we're at it anyway, replace the unconventional
$op_preempt_count names with the more conventional preempt_count_$op.

Since these basic operators are equivalent to the previous _notrace()
variants, do away with the _notrace() versions.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-ewbpdbupy9xpsjhg960zwbv8@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/mips/mm/init.c           |   5 +-
 arch/x86/kernel/traps.c       |   4 +-
 include/asm-generic/preempt.h |  35 ++++++++++++++
 include/linux/hardirq.h       |   8 ++--
 include/linux/preempt.h       | 106 +++++++++++++++++++-----------------------
 include/linux/sched.h         |   5 --
 include/linux/uaccess.h       |   8 +---
 kernel/context_tracking.c     |   2 +-
 kernel/sched/core.c           |  29 +++++-------
 kernel/softirq.c              |  14 +++---
 10 files changed, 113 insertions(+), 103 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index e205ef598e97..12156176c7ca 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -124,7 +124,7 @@ void *kmap_coherent(struct page *page, unsigned long addr)
 
 	BUG_ON(Page_dcache_dirty(page));
 
-	inc_preempt_count();
+	pagefault_disable();
 	idx = (addr >> PAGE_SHIFT) & (FIX_N_COLOURS - 1);
 #ifdef CONFIG_MIPS_MT_SMTC
 	idx += FIX_N_COLOURS * smp_processor_id() +
@@ -193,8 +193,7 @@ void kunmap_coherent(void)
 	write_c0_entryhi(old_ctx);
 	EXIT_CRITICAL(flags);
 #endif
-	dec_preempt_count();
-	preempt_check_resched();
+	pagefault_enable();
 }
 
 void copy_user_highpage(struct page *to, struct page *from,
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 8c8093b146ca..729aa779ff75 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -88,7 +88,7 @@ static inline void conditional_sti(struct pt_regs *regs)
 
 static inline void preempt_conditional_sti(struct pt_regs *regs)
 {
-	inc_preempt_count();
+	preempt_count_inc();
 	if (regs->flags & X86_EFLAGS_IF)
 		local_irq_enable();
 }
@@ -103,7 +103,7 @@ static inline void preempt_conditional_cli(struct pt_regs *regs)
 {
 	if (regs->flags & X86_EFLAGS_IF)
 		local_irq_disable();
-	dec_preempt_count();
+	preempt_count_dec();
 }
 
 static int __kprobes
diff --git a/include/asm-generic/preempt.h b/include/asm-generic/preempt.h
index 8100b1ec1715..82d958fc3823 100644
--- a/include/asm-generic/preempt.h
+++ b/include/asm-generic/preempt.h
@@ -65,4 +65,39 @@ static __always_inline bool test_preempt_need_resched(void)
 	return !(*preempt_count_ptr() & PREEMPT_NEED_RESCHED);
 }
 
+/*
+ * The various preempt_count add/sub methods
+ */
+
+static __always_inline void __preempt_count_add(int val)
+{
+	*preempt_count_ptr() += val;
+}
+
+static __always_inline void __preempt_count_sub(int val)
+{
+	*preempt_count_ptr() -= val;
+}
+
+static __always_inline bool __preempt_count_dec_and_test(void)
+{
+	return !--*preempt_count_ptr();
+}
+
+/*
+ * Returns true when we need to resched -- even if we can not.
+ */
+static __always_inline bool need_resched(void)
+{
+	return unlikely(test_preempt_need_resched());
+}
+
+/*
+ * Returns true when we need to resched and can (barring IRQ state).
+ */
+static __always_inline bool should_resched(void)
+{
+	return unlikely(!*preempt_count_ptr());
+}
+
 #endif /* __ASM_PREEMPT_H */
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index 1e041063b226..d9cf963ac832 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -33,7 +33,7 @@ extern void rcu_nmi_exit(void);
 #define __irq_enter()					\
 	do {						\
 		account_irq_enter_time(current);	\
-		add_preempt_count(HARDIRQ_OFFSET);	\
+		preempt_count_add(HARDIRQ_OFFSET);	\
 		trace_hardirq_enter();			\
 	} while (0)
 
@@ -49,7 +49,7 @@ extern void irq_enter(void);
 	do {						\
 		trace_hardirq_exit();			\
 		account_irq_exit_time(current);		\
-		sub_preempt_count(HARDIRQ_OFFSET);	\
+		preempt_count_sub(HARDIRQ_OFFSET);	\
 	} while (0)
 
 /*
@@ -62,7 +62,7 @@ extern void irq_exit(void);
 		lockdep_off();					\
 		ftrace_nmi_enter();				\
 		BUG_ON(in_nmi());				\
-		add_preempt_count(NMI_OFFSET + HARDIRQ_OFFSET);	\
+		preempt_count_add(NMI_OFFSET + HARDIRQ_OFFSET);	\
 		rcu_nmi_enter();				\
 		trace_hardirq_enter();				\
 	} while (0)
@@ -72,7 +72,7 @@ extern void irq_exit(void);
 		trace_hardirq_exit();				\
 		rcu_nmi_exit();					\
 		BUG_ON(!in_nmi());				\
-		sub_preempt_count(NMI_OFFSET + HARDIRQ_OFFSET);	\
+		preempt_count_sub(NMI_OFFSET + HARDIRQ_OFFSET);	\
 		ftrace_nmi_exit();				\
 		lockdep_on();					\
 	} while (0)
diff --git a/include/linux/preempt.h b/include/linux/preempt.h
index df8e245e8729..2343d8715299 100644
--- a/include/linux/preempt.h
+++ b/include/linux/preempt.h
@@ -18,97 +18,86 @@
 #include <asm/preempt.h>
 
 #if defined(CONFIG_DEBUG_PREEMPT) || defined(CONFIG_PREEMPT_TRACER)
-  extern void add_preempt_count(int val);
-  extern void sub_preempt_count(int val);
+extern void preempt_count_add(int val);
+extern void preempt_count_sub(int val);
+#define preempt_count_dec_and_test() ({ preempt_count_sub(1); should_resched(); })
 #else
-# define add_preempt_count(val)	do { *preempt_count_ptr() += (val); } while (0)
-# define sub_preempt_count(val)	do { *preempt_count_ptr() -= (val); } while (0)
+#define preempt_count_add(val)	__preempt_count_add(val)
+#define preempt_count_sub(val)	__preempt_count_sub(val)
+#define preempt_count_dec_and_test() __preempt_count_dec_and_test()
 #endif
 
-#define inc_preempt_count() add_preempt_count(1)
-#define dec_preempt_count() sub_preempt_count(1)
-
-#ifdef CONFIG_PREEMPT
-
-asmlinkage void preempt_schedule(void);
-
-#define preempt_check_resched() \
-do { \
-	if (unlikely(!*preempt_count_ptr())) \
-		preempt_schedule(); \
-} while (0)
-
-#ifdef CONFIG_CONTEXT_TRACKING
-
-void preempt_schedule_context(void);
-
-#define preempt_check_resched_context() \
-do { \
-	if (unlikely(!*preempt_count_ptr())) \
-		preempt_schedule_context(); \
-} while (0)
-#else
-
-#define preempt_check_resched_context() preempt_check_resched()
-
-#endif /* CONFIG_CONTEXT_TRACKING */
-
-#else /* !CONFIG_PREEMPT */
-
-#define preempt_check_resched()		do { } while (0)
-#define preempt_check_resched_context()	do { } while (0)
-
-#endif /* CONFIG_PREEMPT */
+#define __preempt_count_inc() __preempt_count_add(1)
+#define __preempt_count_dec() __preempt_count_sub(1)
 
+#define preempt_count_inc() preempt_count_add(1)
+#define preempt_count_dec() preempt_count_sub(1)
 
 #ifdef CONFIG_PREEMPT_COUNT
 
 #define preempt_disable() \
 do { \
-	inc_preempt_count(); \
+	preempt_count_inc(); \
 	barrier(); \
 } while (0)
 
 #define sched_preempt_enable_no_resched() \
 do { \
 	barrier(); \
-	dec_preempt_count(); \
+	preempt_count_dec(); \
 } while (0)
 
-#define preempt_enable_no_resched()	sched_preempt_enable_no_resched()
+#define preempt_enable_no_resched() sched_preempt_enable_no_resched()
 
+#ifdef CONFIG_PREEMPT
+asmlinkage void preempt_schedule(void);
 #define preempt_enable() \
 do { \
-	preempt_enable_no_resched(); \
-	preempt_check_resched(); \
+	barrier(); \
+	if (unlikely(preempt_count_dec_and_test())) \
+		preempt_schedule(); \
 } while (0)
 
-/* For debugging and tracer internals only! */
-#define add_preempt_count_notrace(val)			\
-	do { *preempt_count_ptr() += (val); } while (0)
-#define sub_preempt_count_notrace(val)			\
-	do { *preempt_count_ptr() -= (val); } while (0)
-#define inc_preempt_count_notrace() add_preempt_count_notrace(1)
-#define dec_preempt_count_notrace() sub_preempt_count_notrace(1)
+#define preempt_check_resched() \
+do { \
+	if (should_resched()) \
+		preempt_schedule(); \
+} while (0)
+
+#else
+#define preempt_enable() preempt_enable_no_resched()
+#define preempt_check_resched() do { } while (0)
+#endif
 
 #define preempt_disable_notrace() \
 do { \
-	inc_preempt_count_notrace(); \
+	__preempt_count_inc(); \
 	barrier(); \
 } while (0)
 
 #define preempt_enable_no_resched_notrace() \
 do { \
 	barrier(); \
-	dec_preempt_count_notrace(); \
+	__preempt_count_dec(); \
 } while (0)
 
-/* preempt_check_resched is OK to trace */
+#ifdef CONFIG_PREEMPT
+
+#ifdef CONFIG_CONTEXT_TRACKING
+asmlinkage void preempt_schedule_context(void);
+#else
+#define preempt_schedule_context() preempt_schedule()
+#endif
+
 #define preempt_enable_notrace() \
 do { \
-	preempt_enable_no_resched_notrace(); \
-	preempt_check_resched_context(); \
+	barrier(); \
+	if (unlikely(__preempt_count_dec_and_test())) \
+		preempt_schedule_context(); \
 } while (0)
+#else
+#define preempt_enable_notrace() preempt_enable_no_resched_notrace()
+#endif
 
 #else /* !CONFIG_PREEMPT_COUNT */
 
@@ -118,10 +107,11 @@ do { \
  * that can cause faults and scheduling migrate into our preempt-protected
  * region.
  */
-#define preempt_disable()		barrier()
+#define preempt_disable()			barrier()
 #define sched_preempt_enable_no_resched()	barrier()
-#define preempt_enable_no_resched()	barrier()
-#define preempt_enable()		barrier()
+#define preempt_enable_no_resched()		barrier()
+#define preempt_enable()			barrier()
+#define preempt_check_resched()			do { } while (0)
 
 #define preempt_disable_notrace()		barrier()
 #define preempt_enable_no_resched_notrace()	barrier()
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 9fa151fb968e..06ac17c7e639 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -2409,11 +2409,6 @@ static inline int signal_pending_state(long state, struct task_struct *p)
 	return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p);
 }
 
-static inline int need_resched(void)
-{
-	return unlikely(test_preempt_need_resched());
-}
-
 /*
  * cond_resched() and cond_resched_lock(): latency reduction via
  * explicit rescheduling in places that are safe. The return
diff --git a/include/linux/uaccess.h b/include/linux/uaccess.h
index 5ca0951e1855..9d8cf056e661 100644
--- a/include/linux/uaccess.h
+++ b/include/linux/uaccess.h
@@ -15,7 +15,7 @@
  */
 static inline void pagefault_disable(void)
 {
-	inc_preempt_count();
+	preempt_count_inc();
 	/*
 	 * make sure to have issued the store before a pagefault
 	 * can hit.
@@ -30,11 +30,7 @@ static inline void pagefault_enable(void)
 	 * the pagefault handler again.
 	 */
 	barrier();
-	dec_preempt_count();
-	/*
-	 * make sure we do..
-	 */
-	barrier();
+	preempt_count_dec();
 	preempt_check_resched();
 }
 
diff --git a/kernel/context_tracking.c b/kernel/context_tracking.c
index 247091bf0587..013161f1c807 100644
--- a/kernel/context_tracking.c
+++ b/kernel/context_tracking.c
@@ -111,7 +111,7 @@ void context_tracking_user_enter(void)
  * instead of preempt_schedule() to exit user context if needed before
  * calling the scheduler.
  */
-void __sched notrace preempt_schedule_context(void)
+asmlinkage void __sched notrace preempt_schedule_context(void)
 {
 	enum ctx_state prev_ctx;
 
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 0ba4e4192390..9c84a9ab1892 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -2219,7 +2219,7 @@ notrace unsigned long get_parent_ip(unsigned long addr)
 #if defined(CONFIG_PREEMPT) && (defined(CONFIG_DEBUG_PREEMPT) || \
 				defined(CONFIG_PREEMPT_TRACER))
 
-void __kprobes add_preempt_count(int val)
+void __kprobes preempt_count_add(int val)
 {
 #ifdef CONFIG_DEBUG_PREEMPT
 	/*
@@ -2228,7 +2228,7 @@ void __kprobes add_preempt_count(int val)
 	if (DEBUG_LOCKS_WARN_ON((preempt_count() < 0)))
 		return;
 #endif
-	add_preempt_count_notrace(val);
+	__preempt_count_add(val);
 #ifdef CONFIG_DEBUG_PREEMPT
 	/*
 	 * Spinlock count overflowing soon?
@@ -2239,9 +2239,9 @@ void __kprobes add_preempt_count(int val)
 	if (preempt_count() == val)
 		trace_preempt_off(CALLER_ADDR0, get_parent_ip(CALLER_ADDR1));
 }
-EXPORT_SYMBOL(add_preempt_count);
+EXPORT_SYMBOL(preempt_count_add);
 
-void __kprobes sub_preempt_count(int val)
+void __kprobes preempt_count_sub(int val)
 {
 #ifdef CONFIG_DEBUG_PREEMPT
 	/*
@@ -2259,9 +2259,9 @@ void __kprobes sub_preempt_count(int val)
 
 	if (preempt_count() == val)
 		trace_preempt_on(CALLER_ADDR0, get_parent_ip(CALLER_ADDR1));
-	sub_preempt_count_notrace(val);
+	__preempt_count_sub(val);
 }
-EXPORT_SYMBOL(sub_preempt_count);
+EXPORT_SYMBOL(preempt_count_sub);
 
 #endif
 
@@ -2525,9 +2525,9 @@ asmlinkage void __sched notrace preempt_schedule(void)
 		return;
 
 	do {
-		add_preempt_count_notrace(PREEMPT_ACTIVE);
+		__preempt_count_add(PREEMPT_ACTIVE);
 		__schedule();
-		sub_preempt_count_notrace(PREEMPT_ACTIVE);
+		__preempt_count_sub(PREEMPT_ACTIVE);
 
 		/*
 		 * Check again in case we missed a preemption opportunity
@@ -2554,11 +2554,11 @@ asmlinkage void __sched preempt_schedule_irq(void)
 	prev_state = exception_enter();
 
 	do {
-		add_preempt_count(PREEMPT_ACTIVE);
+		__preempt_count_add(PREEMPT_ACTIVE);
 		local_irq_enable();
 		__schedule();
 		local_irq_disable();
-		sub_preempt_count(PREEMPT_ACTIVE);
+		__preempt_count_sub(PREEMPT_ACTIVE);
 
 		/*
 		 * Check again in case we missed a preemption opportunity
@@ -3798,16 +3798,11 @@ SYSCALL_DEFINE0(sched_yield)
 	return 0;
 }
 
-static inline int should_resched(void)
-{
-	return need_resched() && !(preempt_count() & PREEMPT_ACTIVE);
-}
-
 static void __cond_resched(void)
 {
-	add_preempt_count(PREEMPT_ACTIVE);
+	__preempt_count_add(PREEMPT_ACTIVE);
 	__schedule();
-	sub_preempt_count(PREEMPT_ACTIVE);
+	__preempt_count_sub(PREEMPT_ACTIVE);
 }
 
 int __sched _cond_resched(void)
diff --git a/kernel/softirq.c b/kernel/softirq.c
index a90de70cf1f3..3e88612fc87e 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -100,13 +100,13 @@ static void __local_bh_disable(unsigned long ip, unsigned int cnt)
 
 	raw_local_irq_save(flags);
 	/*
-	 * The preempt tracer hooks into add_preempt_count and will break
+	 * The preempt tracer hooks into preempt_count_add and will break
 	 * lockdep because it calls back into lockdep after SOFTIRQ_OFFSET
 	 * is set and before current->softirq_enabled is cleared.
 	 * We must manually increment preempt_count here and manually
 	 * call the trace_preempt_off later.
 	 */
-	add_preempt_count_notrace(cnt);
+	__preempt_count_add(cnt);
 	/*
 	 * Were softirqs turned off above:
 	 */
@@ -120,7 +120,7 @@ static void __local_bh_disable(unsigned long ip, unsigned int cnt)
 #else /* !CONFIG_TRACE_IRQFLAGS */
 static inline void __local_bh_disable(unsigned long ip, unsigned int cnt)
 {
-	add_preempt_count(cnt);
+	preempt_count_add(cnt);
 	barrier();
 }
 #endif /* CONFIG_TRACE_IRQFLAGS */
@@ -139,7 +139,7 @@ static void __local_bh_enable(unsigned int cnt)
 
 	if (softirq_count() == cnt)
 		trace_softirqs_on(_RET_IP_);
-	sub_preempt_count(cnt);
+	preempt_count_sub(cnt);
 }
 
 /*
@@ -169,12 +169,12 @@ static inline void _local_bh_enable_ip(unsigned long ip)
 	 * Keep preemption disabled until we are done with
 	 * softirq processing:
  	 */
-	sub_preempt_count(SOFTIRQ_DISABLE_OFFSET - 1);
+	preempt_count_sub(SOFTIRQ_DISABLE_OFFSET - 1);
 
 	if (unlikely(!in_interrupt() && local_softirq_pending()))
 		do_softirq();
 
-	dec_preempt_count();
+	preempt_count_dec();
 #ifdef CONFIG_TRACE_IRQFLAGS
 	local_irq_enable();
 #endif
@@ -360,7 +360,7 @@ void irq_exit(void)
 
 	account_irq_exit_time(current);
 	trace_hardirq_exit();
-	sub_preempt_count(HARDIRQ_OFFSET);
+	preempt_count_sub(HARDIRQ_OFFSET);
 	if (!in_interrupt() && local_softirq_pending())
 		invoke_softirq();
 
-- 
cgit v1.2.3


From c2daa3bed53a81171cf8c1a36db798e82b91afe8 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra
Date: Wed, 14 Aug 2013 14:51:00 +0200
Subject: sched, x86: Provide a per-cpu preempt_count implementation

Convert x86 to use a per-cpu preemption count. The reason for doing so
is that accessing per-cpu variables is a lot cheaper than accessing
thread_info variables.

We still need to save/restore the actual preemption count due to
PREEMPT_ACTIVE so we place the per-cpu __preempt_count variable in the
same cache-line as the other hot __switch_to() variables such as
current_task.

NOTE: this save/restore is required even for !PREEMPT kernels as
cond_resched() also relies on preempt_count's PREEMPT_ACTIVE to ignore
task_struct::state.

Also rename thread_info::preempt_count to ensure nobody is
'accidentally' still poking at it.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-gzn5rfsf8trgjoqx8hyayy3q@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/include/asm/Kbuild        |  1 -
 arch/x86/include/asm/preempt.h     | 98 ++++++++++++++++++++++++++++++++++++++
 arch/x86/include/asm/thread_info.h |  5 +-
 arch/x86/kernel/asm-offsets.c      |  1 -
 arch/x86/kernel/cpu/common.c       |  5 ++
 arch/x86/kernel/entry_32.S         |  7 +--
 arch/x86/kernel/entry_64.S         |  4 +-
 arch/x86/kernel/irq_32.c           |  4 --
 arch/x86/kernel/process_32.c       |  8 ++++
 arch/x86/kernel/process_64.c       |  8 ++++
 10 files changed, 124 insertions(+), 17 deletions(-)
 create mode 100644 arch/x86/include/asm/preempt.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/Kbuild b/arch/x86/include/asm/Kbuild
index eca20286a91c..7f669853317a 100644
--- a/arch/x86/include/asm/Kbuild
+++ b/arch/x86/include/asm/Kbuild
@@ -5,4 +5,3 @@ genhdr-y += unistd_64.h
 genhdr-y += unistd_x32.h
 
 generic-y += clkdev.h
-generic-y += preempt.h
diff --git a/arch/x86/include/asm/preempt.h b/arch/x86/include/asm/preempt.h
new file mode 100644
index 000000000000..1309942b95e5
--- /dev/null
+++ b/arch/x86/include/asm/preempt.h
@@ -0,0 +1,98 @@
+#ifndef __ASM_PREEMPT_H
+#define __ASM_PREEMPT_H
+
+#include <asm/rmwcc.h>
+#include <asm/percpu.h>
+#include <linux/thread_info.h>
+
+DECLARE_PER_CPU(int, __preempt_count);
+
+/*
+ * We mask the PREEMPT_NEED_RESCHED bit so as not to confuse all current users
+ * that think a non-zero value indicates we cannot preempt.
+ */
+static __always_inline int preempt_count(void)
+{
+	return __this_cpu_read_4(__preempt_count) & ~PREEMPT_NEED_RESCHED;
+}
+
+static __always_inline void preempt_count_set(int pc)
+{
+	__this_cpu_write_4(__preempt_count, pc);
+}
+
+/*
+ * must be macros to avoid header recursion hell
+ */
+#define task_preempt_count(p) \
+	(task_thread_info(p)->saved_preempt_count & ~PREEMPT_NEED_RESCHED)
+
+#define init_task_preempt_count(p) do { \
+	task_thread_info(p)->saved_preempt_count = PREEMPT_DISABLED; \
+} while (0)
+
+#define init_idle_preempt_count(p, cpu) do { \
+	task_thread_info(p)->saved_preempt_count = PREEMPT_ENABLED; \
+	per_cpu(__preempt_count, (cpu)) = PREEMPT_ENABLED; \
+} while (0)
+
+/*
+ * We fold the NEED_RESCHED bit into the preempt count such that
+ * preempt_enable() can decrement and test for needing to reschedule with a
+ * single instruction.
+ *
+ * We invert the actual bit, so that when the decrement hits 0 we know we both
+ * need to resched (the bit is cleared) and can resched (no preempt count).
+ */
+
+static __always_inline void set_preempt_need_resched(void)
+{
+	__this_cpu_and_4(__preempt_count, ~PREEMPT_NEED_RESCHED);
+}
+
+static __always_inline void clear_preempt_need_resched(void)
+{
+	__this_cpu_or_4(__preempt_count, PREEMPT_NEED_RESCHED);
+}
+
+static __always_inline bool test_preempt_need_resched(void)
+{
+	return !(__this_cpu_read_4(__preempt_count) & PREEMPT_NEED_RESCHED);
+}
+
+/*
+ * The various preempt_count add/sub methods
+ */
+
+static __always_inline void __preempt_count_add(int val)
+{
+	__this_cpu_add_4(__preempt_count, val);
+}
+
+static __always_inline void __preempt_count_sub(int val)
+{
+	__this_cpu_add_4(__preempt_count, -val);
+}
+
+static __always_inline bool __preempt_count_dec_and_test(void)
+{
+	GEN_UNARY_RMWcc("decl", __preempt_count, __percpu_arg(0), "e");
+}
+
+/*
+ * Returns true when we need to resched -- even if we can not.
+ */
+static __always_inline bool need_resched(void)
+{
+	return unlikely(test_preempt_need_resched());
+}
+
+/*
+ * Returns true when we need to resched and can (barring IRQ state).
+ */
+static __always_inline bool should_resched(void)
+{
+	return unlikely(!__this_cpu_read_4(__preempt_count));
+}
+
+#endif /* __ASM_PREEMPT_H */
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index 27811190cbd7..c46a46be1ec6 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -28,8 +28,7 @@ struct thread_info {
 	__u32			flags;		/* low level flags */
 	__u32			status;		/* thread synchronous flags */
 	__u32			cpu;		/* current CPU */
-	int			preempt_count;	/* 0 => preemptable,
-						   <0 => BUG */
+	int			saved_preempt_count;
 	mm_segment_t		addr_limit;
 	struct restart_block    restart_block;
 	void __user		*sysenter_return;
@@ -49,7 +48,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= INIT_PREEMPT_COUNT,	\
+	.saved_preempt_count = INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
index 28610822fb3c..9f6b9341950f 100644
--- a/arch/x86/kernel/asm-offsets.c
+++ b/arch/x86/kernel/asm-offsets.c
@@ -32,7 +32,6 @@ void common(void) {
 	OFFSET(TI_flags, thread_info, flags);
 	OFFSET(TI_status, thread_info, status);
 	OFFSET(TI_addr_limit, thread_info, addr_limit);
-	OFFSET(TI_preempt_count, thread_info, preempt_count);
 
 	BLANK();
 	OFFSET(crypto_tfm_ctx_offset, crypto_tfm, __crt_ctx);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 2793d1f095a2..5223fe6dec7b 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1095,6 +1095,9 @@ DEFINE_PER_CPU(char *, irq_stack_ptr) =
 
 DEFINE_PER_CPU(unsigned int, irq_count) __visible = -1;
 
+DEFINE_PER_CPU(int, __preempt_count) = INIT_PREEMPT_COUNT;
+EXPORT_PER_CPU_SYMBOL(__preempt_count);
+
 DEFINE_PER_CPU(struct task_struct *, fpu_owner_task);
 
 /*
@@ -1169,6 +1172,8 @@ void debug_stack_reset(void)
 
 DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
 EXPORT_PER_CPU_SYMBOL(current_task);
+DEFINE_PER_CPU(int, __preempt_count) = INIT_PREEMPT_COUNT;
+EXPORT_PER_CPU_SYMBOL(__preempt_count);
 DEFINE_PER_CPU(struct task_struct *, fpu_owner_task);
 
 #ifdef CONFIG_CC_STACKPROTECTOR
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index f0dcb0ceb6a2..fd1bc1b15e6d 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -362,12 +362,9 @@ END(ret_from_exception)
 #ifdef CONFIG_PREEMPT
 ENTRY(resume_kernel)
 	DISABLE_INTERRUPTS(CLBR_ANY)
-	cmpl $0,TI_preempt_count(%ebp)	# non-zero preempt_count ?
-	jnz restore_all
 need_resched:
-	movl TI_flags(%ebp), %ecx	# need_resched set ?
-	testb $_TIF_NEED_RESCHED, %cl
-	jz restore_all
+	cmpl $0,PER_CPU_VAR(__preempt_count)
+	jnz restore_all
 	testl $X86_EFLAGS_IF,PT_EFLAGS(%esp)	# interrupts off (exception path) ?
 	jz restore_all
 	call preempt_schedule_irq
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 1b69951a81e2..6a43e7d29fe7 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1118,10 +1118,8 @@ retint_signal:
 	/* Returning to kernel space. Check if we need preemption */
 	/* rcx:	 threadinfo. interrupts off. */
 ENTRY(retint_kernel)
-	cmpl $0,TI_preempt_count(%rcx)
+	cmpl $0,PER_CPU_VAR(__preempt_count)
 	jnz  retint_restore_args
-	bt  $TIF_NEED_RESCHED,TI_flags(%rcx)
-	jnc  retint_restore_args
 	bt   $9,EFLAGS-ARGOFFSET(%rsp)	/* interrupts off? */
 	jnc  retint_restore_args
 	call preempt_schedule_irq
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 4186755f1d7c..3fe066359ac0 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -100,9 +100,6 @@ execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq)
 	irqctx->tinfo.task = curctx->tinfo.task;
 	irqctx->tinfo.previous_esp = current_stack_pointer;
 
-	/* Copy the preempt_count so that the [soft]irq checks work. */
-	irqctx->tinfo.preempt_count = curctx->tinfo.preempt_count;
-
 	if (unlikely(overflow))
 		call_on_stack(print_stack_overflow, isp);
 
@@ -131,7 +128,6 @@ void irq_ctx_init(int cpu)
 					       THREAD_SIZE_ORDER));
 	memset(&irqctx->tinfo, 0, sizeof(struct thread_info));
 	irqctx->tinfo.cpu		= cpu;
-	irqctx->tinfo.preempt_count	= HARDIRQ_OFFSET;
 	irqctx->tinfo.addr_limit	= MAKE_MM_SEG(0);
 
 	per_cpu(hardirq_ctx, cpu) = irqctx;
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 884f98f69354..c2ec1aa6d454 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -291,6 +291,14 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	if (get_kernel_rpl() && unlikely(prev->iopl != next->iopl))
 		set_iopl_mask(next->iopl);
 
+	/*
+	 * If it were not for PREEMPT_ACTIVE we could guarantee that the
+	 * preempt_count of all tasks was equal here and this would not be
+	 * needed.
+	 */
+	task_thread_info(prev_p)->saved_preempt_count = this_cpu_read(__preempt_count);
+	this_cpu_write(__preempt_count, task_thread_info(next_p)->saved_preempt_count);
+
 	/*
 	 * Now maybe handle debug registers and/or IO bitmaps
 	 */
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index bb1dc51bab05..45ab4d6fc8a7 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -363,6 +363,14 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	this_cpu_write(old_rsp, next->usersp);
 	this_cpu_write(current_task, next_p);
 
+	/*
+	 * If it were not for PREEMPT_ACTIVE we could guarantee that the
+	 * preempt_count of all tasks was equal here and this would not be
+	 * needed.
+	 */
+	task_thread_info(prev_p)->saved_preempt_count = this_cpu_read(__preempt_count);
+	this_cpu_write(__preempt_count, task_thread_info(next_p)->saved_preempt_count);
+
 	this_cpu_write(kernel_stack,
 		  (unsigned long)task_stack_page(next_p) +
 		  THREAD_SIZE - KERNEL_STACK_OFFSET);
-- 
cgit v1.2.3


From 1a338ac32ca630f67df25b4a16436cccc314e997 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra
Date: Wed, 14 Aug 2013 14:51:00 +0200
Subject: sched, x86: Optimize the preempt_schedule() call

Remove the bloat of the C calling convention out of the
preempt_enable() sites by creating an ASM wrapper which allows us to
do an asm("call ___preempt_schedule") instead.

calling.h bits by Andi Kleen

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-tk7xdi1cvvxewixzke8t8le1@git.kernel.org
[ Fixed build error. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/include/asm/calling.h   | 50 ++++++++++++++++++++++++++++++++++++++++
 arch/x86/include/asm/preempt.h   | 10 ++++++++
 arch/x86/kernel/Makefile         |  2 ++
 arch/x86/kernel/i386_ksyms_32.c  |  7 ++++++
 arch/x86/kernel/preempt.S        | 25 ++++++++++++++++++++
 arch/x86/kernel/x8664_ksyms_64.c |  7 ++++++
 include/asm-generic/preempt.h    | 10 ++++++++
 include/linux/preempt.h          | 13 ++++-------
 8 files changed, 116 insertions(+), 8 deletions(-)
 create mode 100644 arch/x86/kernel/preempt.S

(limited to 'arch')

diff --git a/arch/x86/include/asm/calling.h b/arch/x86/include/asm/calling.h
index 0fa675033912..cb4c73bfeb48 100644
--- a/arch/x86/include/asm/calling.h
+++ b/arch/x86/include/asm/calling.h
@@ -48,6 +48,8 @@ For 32-bit we have the following conventions - kernel is built with
 
 #include <asm/dwarf2.h>
 
+#ifdef CONFIG_X86_64
+
 /*
  * 64-bit system call stack frame layout defines and helpers,
  * for assembly code:
@@ -192,3 +194,51 @@ For 32-bit we have the following conventions - kernel is built with
 	.macro icebp
 	.byte 0xf1
 	.endm
+
+#else /* CONFIG_X86_64 */
+
+/*
+ * For 32bit only simplified versions of SAVE_ALL/RESTORE_ALL. These
+ * are different from the entry_32.S versions in not changing the segment
+ * registers. So only suitable for in kernel use, not when transitioning
+ * from or to user space. The resulting stack frame is not a standard
+ * pt_regs frame. The main use case is calling C code from assembler
+ * when all the registers need to be preserved.
+ */
+
+	.macro SAVE_ALL
+	pushl_cfi %eax
+	CFI_REL_OFFSET eax, 0
+	pushl_cfi %ebp
+	CFI_REL_OFFSET ebp, 0
+	pushl_cfi %edi
+	CFI_REL_OFFSET edi, 0
+	pushl_cfi %esi
+	CFI_REL_OFFSET esi, 0
+	pushl_cfi %edx
+	CFI_REL_OFFSET edx, 0
+	pushl_cfi %ecx
+	CFI_REL_OFFSET ecx, 0
+	pushl_cfi %ebx
+	CFI_REL_OFFSET ebx, 0
+	.endm
+
+	.macro RESTORE_ALL
+	popl_cfi %ebx
+	CFI_RESTORE ebx
+	popl_cfi %ecx
+	CFI_RESTORE ecx
+	popl_cfi %edx
+	CFI_RESTORE edx
+	popl_cfi %esi
+	CFI_RESTORE esi
+	popl_cfi %edi
+	CFI_RESTORE edi
+	popl_cfi %ebp
+	CFI_RESTORE ebp
+	popl_cfi %eax
+	CFI_RESTORE eax
+	.endm
+
+#endif /* CONFIG_X86_64 */
+
diff --git a/arch/x86/include/asm/preempt.h b/arch/x86/include/asm/preempt.h
index 1309942b95e5..1de41690ff99 100644
--- a/arch/x86/include/asm/preempt.h
+++ b/arch/x86/include/asm/preempt.h
@@ -95,4 +95,14 @@ static __always_inline bool should_resched(void)
 	return unlikely(!__this_cpu_read_4(__preempt_count));
 }
 
+#ifdef CONFIG_PREEMPT
+  extern asmlinkage void ___preempt_schedule(void);
+# define __preempt_schedule() asm ("call ___preempt_schedule")
+  extern asmlinkage void preempt_schedule(void);
+# ifdef CONFIG_CONTEXT_TRACKING
+    extern asmlinkage void ___preempt_schedule_context(void);
+#   define __preempt_schedule_context() asm ("call ___preempt_schedule_context")
+# endif
+#endif
+
 #endif /* __ASM_PREEMPT_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index a5408b965c9d..9b0a34e2cd79 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -36,6 +36,8 @@ obj-y			+= tsc.o io_delay.o rtc.o
 obj-y			+= pci-iommu_table.o
 obj-y			+= resource.o
 
+obj-$(CONFIG_PREEMPT)	+= preempt.o
+
 obj-y				+= process.o
 obj-y				+= i387.o xsave.o
 obj-y				+= ptrace.o
diff --git a/arch/x86/kernel/i386_ksyms_32.c b/arch/x86/kernel/i386_ksyms_32.c
index 0fa69127209a..05fd74f537d6 100644
--- a/arch/x86/kernel/i386_ksyms_32.c
+++ b/arch/x86/kernel/i386_ksyms_32.c
@@ -37,3 +37,10 @@ EXPORT_SYMBOL(strstr);
 
 EXPORT_SYMBOL(csum_partial);
 EXPORT_SYMBOL(empty_zero_page);
+
+#ifdef CONFIG_PREEMPT
+EXPORT_SYMBOL(___preempt_schedule);
+#ifdef CONFIG_CONTEXT_TRACKING
+EXPORT_SYMBOL(___preempt_schedule_context);
+#endif
+#endif
diff --git a/arch/x86/kernel/preempt.S b/arch/x86/kernel/preempt.S
new file mode 100644
index 000000000000..ca7f0d58a87d
--- /dev/null
+++ b/arch/x86/kernel/preempt.S
@@ -0,0 +1,25 @@
+
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+#include <asm/asm.h>
+#include <asm/calling.h>
+
+ENTRY(___preempt_schedule)
+	CFI_STARTPROC
+	SAVE_ALL
+	call preempt_schedule
+	RESTORE_ALL
+	ret
+	CFI_ENDPROC
+
+#ifdef CONFIG_CONTEXT_TRACKING
+
+ENTRY(___preempt_schedule_context)
+	CFI_STARTPROC
+	SAVE_ALL
+	call preempt_schedule_context
+	RESTORE_ALL
+	ret
+	CFI_ENDPROC
+
+#endif
diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c
index b014d9414d08..040681928e9d 100644
--- a/arch/x86/kernel/x8664_ksyms_64.c
+++ b/arch/x86/kernel/x8664_ksyms_64.c
@@ -66,3 +66,10 @@ EXPORT_SYMBOL(empty_zero_page);
 #ifndef CONFIG_PARAVIRT
 EXPORT_SYMBOL(native_load_gs_index);
 #endif
+
+#ifdef CONFIG_PREEMPT
+EXPORT_SYMBOL(___preempt_schedule);
+#ifdef CONFIG_CONTEXT_TRACKING
+EXPORT_SYMBOL(___preempt_schedule_context);
+#endif
+#endif
diff --git a/include/asm-generic/preempt.h b/include/asm-generic/preempt.h
index 82d958fc3823..5dc14ed3791c 100644
--- a/include/asm-generic/preempt.h
+++ b/include/asm-generic/preempt.h
@@ -100,4 +100,14 @@ static __always_inline bool should_resched(void)
 	return unlikely(!*preempt_count_ptr());
 }
 
+#ifdef CONFIG_PREEMPT
+extern asmlinkage void preempt_schedule(void);
+#define __preempt_schedule() preempt_schedule()
+
+#ifdef CONFIG_CONTEXT_TRACKING
+extern asmlinkage void preempt_schedule_context(void);
+#define __preempt_schedule_context() preempt_schedule_context()
+#endif
+#endif /* CONFIG_PREEMPT */
+
 #endif /* __ASM_PREEMPT_H */
diff --git a/include/linux/preempt.h b/include/linux/preempt.h
index 2343d8715299..a3d9dc8c2c00 100644
--- a/include/linux/preempt.h
+++ b/include/linux/preempt.h
@@ -50,18 +50,17 @@ do { \
 #define preempt_enable_no_resched() sched_preempt_enable_no_resched()
 
 #ifdef CONFIG_PREEMPT
-asmlinkage void preempt_schedule(void);
 #define preempt_enable() \
 do { \
 	barrier(); \
 	if (unlikely(preempt_count_dec_and_test())) \
-		preempt_schedule(); \
+		__preempt_schedule(); \
 } while (0)
 
 #define preempt_check_resched() \
 do { \
 	if (should_resched()) \
-		preempt_schedule(); \
+		__preempt_schedule(); \
 } while (0)
 
 #else
@@ -83,17 +82,15 @@ do { \
 
 #ifdef CONFIG_PREEMPT
 
-#ifdef CONFIG_CONTEXT_TRACKING
-asmlinkage void preempt_schedule_context(void);
-#else
-#define preempt_schedule_context() preempt_schedule()
+#ifndef CONFIG_CONTEXT_TRACKING
+#define __preempt_schedule_context() __preempt_schedule()
 #endif
 
 #define preempt_enable_notrace() \
 do { \
 	barrier(); \
 	if (unlikely(__preempt_count_dec_and_test())) \
-		preempt_schedule_context(); \
+		__preempt_schedule_context(); \
 } while (0)
 #else
 #define preempt_enable_notrace() preempt_enable_no_resched_notrace()
-- 
cgit v1.2.3


From 16c21ae5ca636cfd38e581ebcf709c49d78ea56d Mon Sep 17 00:00:00 2001
From: Li Fei
Date: Wed, 21 Aug 2013 16:13:57 +0800
Subject: reboot: Allow specifying warm/cold reset for CF9 boot type

In current implementation for reboot type CF9 and CF9_COND,
warm and cold reset are not differentiated, and both are
performed by writing 0x06 to port 0xCF9.

This commit will differentiate warm and cold reset:

For warm reset, write 0x06 to port 0xCF9;
For cold reset, write 0x0E to port 0xCF9.

[ hpa: This meaning of "cold" and "warm" reset is different from other
  reboot types use, where "warm" means "bypass BIOS POST".  It is also
  not entirely clear that it actually solves any actual problem.  However,
  it would seem fairly harmless to offer this additional option.

  Also note that we do not mask bit 3 in the "warm reset" case.  This
  preserves the behavior on existing systems, including ones quirked
  to use CF9.  It seems reasonable that on any system where the
  warm/cold distinction actually matters that bit 3 would be read as
  zero. ]

From: Liu Chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Li Fei <fei.li@intel.com>
Link: http://lkml.kernel.org/r/1377072837.24556.2.camel@fli24-HP-Compaq-8100-Elite-CMT-PC
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/reboot.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 563ed91e6faa..ca42f6350b23 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -511,10 +511,13 @@ static void native_machine_emergency_restart(void)
 
 		case BOOT_CF9_COND:
 			if (port_cf9_safe) {
-				u8 cf9 = inb(0xcf9) & ~6;
+				u8 reboot_code = reboot_mode == REBOOT_WARM ?
+					0x06 : 0x0E;
+				u8 cf9 = inb(0xcf9) & ~reboot_code;
 				outb(cf9|2, 0xcf9); /* Request hard reset */
 				udelay(50);
-				outb(cf9|6, 0xcf9); /* Actually do the reset */
+				/* Actually do the reset */
+				outb(cf9|reboot_code, 0xcf9);
 				udelay(50);
 			}
 			reboot_type = BOOT_KBD;
-- 
cgit v1.2.3


From 28061758dc83df445a05af347b5ce55ccd968c03 Mon Sep 17 00:00:00 2001
From: Sudeep KarkadaNagesha
Date: Tue, 13 Aug 2013 13:43:26 +0100
Subject: ARM/ARM64: arch_timer: add macros for bits in control register

Add macros to describe the bitfields in the ARM architected timer
control register to make code easy to understand.

Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
---
 arch/arm/include/asm/arch_timer.h    |  9 +++++++--
 arch/arm64/include/asm/arch_timer.h  | 12 ++++++++----
 include/clocksource/arm_arch_timer.h |  8 ++++++++
 3 files changed, 23 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h
index 5665134bfa3e..d57e04de8e8c 100644
--- a/arch/arm/include/asm/arch_timer.h
+++ b/arch/arm/include/asm/arch_timer.h
@@ -93,8 +93,13 @@ static inline void arch_counter_set_user_access(void)
 
 	asm volatile("mrc p15, 0, %0, c14, c1, 0" : "=r" (cntkctl));
 
-	/* disable user access to everything */
-	cntkctl &= ~((3 << 8) | (7 << 0));
+	/* Disable user access to both physical/virtual counters/timers */
+	/* Also disable virtual event stream */
+	cntkctl &= ~(ARCH_TIMER_USR_PT_ACCESS_EN
+			| ARCH_TIMER_USR_VT_ACCESS_EN
+			| ARCH_TIMER_VIRT_EVT_EN
+			| ARCH_TIMER_USR_VCT_ACCESS_EN
+			| ARCH_TIMER_USR_PCT_ACCESS_EN);
 
 	asm volatile("mcr p15, 0, %0, c14, c1, 0" : : "r" (cntkctl));
 }
diff --git a/arch/arm64/include/asm/arch_timer.h b/arch/arm64/include/asm/arch_timer.h
index c9f1d2816c2b..2b9722f42729 100644
--- a/arch/arm64/include/asm/arch_timer.h
+++ b/arch/arm64/include/asm/arch_timer.h
@@ -96,12 +96,16 @@ static inline void arch_counter_set_user_access(void)
 {
 	u32 cntkctl;
 
-	/* Disable user access to the timers and the physical counter. */
 	asm volatile("mrs	%0, cntkctl_el1" : "=r" (cntkctl));
-	cntkctl &= ~((3 << 8) | (1 << 0));
 
-	/* Enable user access to the virtual counter and frequency. */
-	cntkctl |= (1 << 1);
+	/* Disable user access to the timers and the physical counter */
+	cntkctl &= ~(ARCH_TIMER_USR_PT_ACCESS_EN
+			| ARCH_TIMER_USR_VT_ACCESS_EN
+			| ARCH_TIMER_USR_PCT_ACCESS_EN);
+
+	/* Enable user access to the virtual counter */
+	cntkctl |= ARCH_TIMER_USR_VCT_ACCESS_EN;
+
 	asm volatile("msr	cntkctl_el1, %0" : : "r" (cntkctl));
 }
 
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index 93b7f96f9c59..8707dae4cee2 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -33,6 +33,14 @@ enum arch_timer_reg {
 #define ARCH_TIMER_MEM_PHYS_ACCESS	2
 #define ARCH_TIMER_MEM_VIRT_ACCESS	3
 
+#define ARCH_TIMER_USR_PCT_ACCESS_EN	(1 << 0) /* physical counter */
+#define ARCH_TIMER_USR_VCT_ACCESS_EN	(1 << 1) /* virtual counter */
+#define ARCH_TIMER_VIRT_EVT_EN		(1 << 2)
+#define ARCH_TIMER_EVT_TRIGGER_SHIFT	(4)
+#define ARCH_TIMER_EVT_TRIGGER_MASK	(0xF << ARCH_TIMER_EVT_TRIGGER_SHIFT)
+#define ARCH_TIMER_USR_VT_ACCESS_EN	(1 << 8) /* virtual timer registers */
+#define ARCH_TIMER_USR_PT_ACCESS_EN	(1 << 9) /* physical timer registers */
+
 #ifdef CONFIG_ARM_ARCH_TIMER
 
 extern u32 arch_timer_get_rate(void);
-- 
cgit v1.2.3


From e9faebc66ec74f1ab7f267d683b45e80faa69763 Mon Sep 17 00:00:00 2001
From: Sudeep KarkadaNagesha
Date: Tue, 13 Aug 2013 14:30:32 +0100
Subject: ARM: arch_timer: add support to configure and enable event stream

This patch adds support for configuring the event stream frequency
and enabling it.

It also adds the hwcaps definitions to the user to detect this event
stream feature.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
---
 arch/arm/include/asm/arch_timer.h | 27 ++++++++++++++++++++++++---
 arch/arm/include/uapi/asm/hwcap.h |  1 +
 arch/arm/kernel/setup.c           |  1 +
 3 files changed, 26 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h
index d57e04de8e8c..0704e0cf5571 100644
--- a/arch/arm/include/asm/arch_timer.h
+++ b/arch/arm/include/asm/arch_timer.h
@@ -87,11 +87,21 @@ static inline u64 arch_counter_get_cntvct(void)
 	return cval;
 }
 
-static inline void arch_counter_set_user_access(void)
+static inline u32 arch_timer_get_cntkctl(void)
 {
 	u32 cntkctl;
-
 	asm volatile("mrc p15, 0, %0, c14, c1, 0" : "=r" (cntkctl));
+	return cntkctl;
+}
+
+static inline void arch_timer_set_cntkctl(u32 cntkctl)
+{
+	asm volatile("mcr p15, 0, %0, c14, c1, 0" : : "r" (cntkctl));
+}
+
+static inline void arch_counter_set_user_access(void)
+{
+	u32 cntkctl = arch_timer_get_cntkctl();
 
 	/* Disable user access to both physical/virtual counters/timers */
 	/* Also disable virtual event stream */
@@ -100,9 +110,20 @@ static inline void arch_counter_set_user_access(void)
 			| ARCH_TIMER_VIRT_EVT_EN
 			| ARCH_TIMER_USR_VCT_ACCESS_EN
 			| ARCH_TIMER_USR_PCT_ACCESS_EN);
+	arch_timer_set_cntkctl(cntkctl);
+}
 
-	asm volatile("mcr p15, 0, %0, c14, c1, 0" : : "r" (cntkctl));
+static inline void arch_timer_evtstrm_enable(int divider)
+{
+	u32 cntkctl = arch_timer_get_cntkctl();
+	cntkctl &= ~ARCH_TIMER_EVT_TRIGGER_MASK;
+	/* Set the divider and enable virtual event stream */
+	cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT)
+			| ARCH_TIMER_VIRT_EVT_EN;
+	arch_timer_set_cntkctl(cntkctl);
+	elf_hwcap |= HWCAP_EVTSTRM;
 }
+
 #endif
 
 #endif
diff --git a/arch/arm/include/uapi/asm/hwcap.h b/arch/arm/include/uapi/asm/hwcap.h
index 6d34d080372a..7dcc10d67253 100644
--- a/arch/arm/include/uapi/asm/hwcap.h
+++ b/arch/arm/include/uapi/asm/hwcap.h
@@ -26,5 +26,6 @@
 #define HWCAP_VFPD32	(1 << 19)	/* set if VFP has 32 regs (not 16) */
 #define HWCAP_IDIV	(HWCAP_IDIVA | HWCAP_IDIVT)
 #define HWCAP_LPAE	(1 << 20)
+#define HWCAP_EVTSTRM	(1 << 21)
 
 #endif /* _UAPI__ASMARM_HWCAP_H */
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 0e1e2b3afa45..5d65438685d8 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -975,6 +975,7 @@ static const char *hwcap_str[] = {
 	"idivt",
 	"vfpd32",
 	"lpae",
+	"evtstrm",
 	NULL
 };
 
-- 
cgit v1.2.3


From 46efe547aca8498d51b64460c02366ae4032ca32 Mon Sep 17 00:00:00 2001
From: Sudeep KarkadaNagesha
Date: Tue, 13 Aug 2013 15:57:53 +0100
Subject: ARM64: arch_timer: add support to configure and enable event stream

This patch adds support for configuring the event stream frequency
and enabling it.

It also adds the hwcaps as well as compat-specific definitions to
the user to detect this event stream feature.

Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
---
 arch/arm64/include/asm/arch_timer.h | 32 +++++++++++++++++++++++++++++---
 arch/arm64/include/asm/hwcap.h      | 11 ++++++-----
 arch/arm64/include/uapi/asm/hwcap.h |  1 +
 arch/arm64/kernel/setup.c           | 11 +++++++++++
 4 files changed, 47 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm64/include/asm/arch_timer.h b/arch/arm64/include/asm/arch_timer.h
index 2b9722f42729..9400596a0f39 100644
--- a/arch/arm64/include/asm/arch_timer.h
+++ b/arch/arm64/include/asm/arch_timer.h
@@ -92,21 +92,47 @@ static inline u32 arch_timer_get_cntfrq(void)
 	return val;
 }
 
-static inline void arch_counter_set_user_access(void)
+static inline u32 arch_timer_get_cntkctl(void)
 {
 	u32 cntkctl;
-
 	asm volatile("mrs	%0, cntkctl_el1" : "=r" (cntkctl));
+	return cntkctl;
+}
+
+static inline void arch_timer_set_cntkctl(u32 cntkctl)
+{
+	asm volatile("msr	cntkctl_el1, %0" : : "r" (cntkctl));
+}
+
+static inline void arch_counter_set_user_access(void)
+{
+	u32 cntkctl = arch_timer_get_cntkctl();
 
 	/* Disable user access to the timers and the physical counter */
+	/* Also disable virtual event stream */
 	cntkctl &= ~(ARCH_TIMER_USR_PT_ACCESS_EN
 			| ARCH_TIMER_USR_VT_ACCESS_EN
+			| ARCH_TIMER_VIRT_EVT_EN
 			| ARCH_TIMER_USR_PCT_ACCESS_EN);
 
 	/* Enable user access to the virtual counter */
 	cntkctl |= ARCH_TIMER_USR_VCT_ACCESS_EN;
 
-	asm volatile("msr	cntkctl_el1, %0" : : "r" (cntkctl));
+	arch_timer_set_cntkctl(cntkctl);
+}
+
+static inline void arch_timer_evtstrm_enable(int divider)
+{
+	u32 cntkctl = arch_timer_get_cntkctl();
+	cntkctl &= ~ARCH_TIMER_EVT_TRIGGER_MASK;
+	/* Set the divider and enable virtual event stream */
+	cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT)
+			| ARCH_TIMER_VIRT_EVT_EN;
+	arch_timer_set_cntkctl(cntkctl);
+	elf_hwcap |= HWCAP_EVTSTRM;
+#ifdef CONFIG_COMPAT
+	compat_elf_hwcap |= COMPAT_HWCAP_EVTSTRM;
+#endif
 }
 
 static inline u64 arch_counter_get_cntvct(void)
diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h
index e2950b098e76..6cddbb0c9f54 100644
--- a/arch/arm64/include/asm/hwcap.h
+++ b/arch/arm64/include/asm/hwcap.h
@@ -30,6 +30,7 @@
 #define COMPAT_HWCAP_IDIVA	(1 << 17)
 #define COMPAT_HWCAP_IDIVT	(1 << 18)
 #define COMPAT_HWCAP_IDIV	(COMPAT_HWCAP_IDIVA|COMPAT_HWCAP_IDIVT)
+#define COMPAT_HWCAP_EVTSTRM	(1 << 21)
 
 #ifndef __ASSEMBLY__
 /*
@@ -37,11 +38,11 @@
  * instruction set this cpu supports.
  */
 #define ELF_HWCAP		(elf_hwcap)
-#define COMPAT_ELF_HWCAP	(COMPAT_HWCAP_HALF|COMPAT_HWCAP_THUMB|\
-				 COMPAT_HWCAP_FAST_MULT|COMPAT_HWCAP_EDSP|\
-				 COMPAT_HWCAP_TLS|COMPAT_HWCAP_VFP|\
-				 COMPAT_HWCAP_VFPv3|COMPAT_HWCAP_VFPv4|\
-				 COMPAT_HWCAP_NEON|COMPAT_HWCAP_IDIV)
+
+#ifdef CONFIG_COMPAT
+#define COMPAT_ELF_HWCAP	(compat_elf_hwcap)
+extern unsigned int compat_elf_hwcap;
+#endif
 
 extern unsigned long elf_hwcap;
 #endif
diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h
index eea497578b87..9b12476e9c85 100644
--- a/arch/arm64/include/uapi/asm/hwcap.h
+++ b/arch/arm64/include/uapi/asm/hwcap.h
@@ -21,6 +21,7 @@
  */
 #define HWCAP_FP		(1 << 0)
 #define HWCAP_ASIMD		(1 << 1)
+#define HWCAP_EVTSTRM		(1 << 2)
 
 
 #endif /* _UAPI__ASM_HWCAP_H */
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 055cfb80e05c..d355b7b9710b 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -60,6 +60,16 @@ EXPORT_SYMBOL(processor_id);
 unsigned long elf_hwcap __read_mostly;
 EXPORT_SYMBOL_GPL(elf_hwcap);
 
+#ifdef CONFIG_COMPAT
+#define COMPAT_ELF_HWCAP_DEFAULT	\
+				(COMPAT_HWCAP_HALF|COMPAT_HWCAP_THUMB|\
+				 COMPAT_HWCAP_FAST_MULT|COMPAT_HWCAP_EDSP|\
+				 COMPAT_HWCAP_TLS|COMPAT_HWCAP_VFP|\
+				 COMPAT_HWCAP_VFPv3|COMPAT_HWCAP_VFPv4|\
+				 COMPAT_HWCAP_NEON|COMPAT_HWCAP_IDIV)
+unsigned int compat_elf_hwcap __read_mostly = COMPAT_ELF_HWCAP_DEFAULT;
+#endif
+
 static const char *cpu_name;
 static const char *machine_name;
 phys_addr_t __fdt_pointer __initdata;
@@ -304,6 +314,7 @@ subsys_initcall(topology_init);
 static const char *hwcap_str[] = {
 	"fp",
 	"asimd",
+	"evtstrm",
 	NULL
 };
 
-- 
cgit v1.2.3


From b5eafc6f07c95e9f3dd047e72737449cb03c9956 Mon Sep 17 00:00:00 2001
From: Masoud Sharbiani
Date: Thu, 26 Sep 2013 10:30:43 -0700
Subject: x86/reboot: Remove the duplicate C6100 entry in the reboot quirks
 list

Two entries for the same system type were added, with two different vendor
names: 'Dell' and 'Dell, Inc.'.

Since a prefix match is being used by the DMI parsing code, we can eliminate
the latter as redundant.

Reported-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Masoud Sharbiani <msharbiani@twitter.com>
Cc: holt@sgi.com
Link: http://lkml.kernel.org/r/1380216643-4683-1-git-send-email-masoud.sharbiani@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/reboot.c | 8 --------
 1 file changed, 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index f0783a68db11..d9333a404685 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -359,14 +359,6 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 		},
 	},
 	{	/* Handle problems with rebooting on the Dell PowerEdge C6100. */
-		.callback = set_pci_reboot,
-		.ident = "Dell PowerEdge C6100",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "C6100"),
-		},
-	},
-	{	/* Some C6100 machines were shipped with vendor being 'Dell'. */
 		.callback = set_pci_reboot,
 		.ident = "Dell PowerEdge C6100",
 		.matches = {
-- 
cgit v1.2.3


From 809373e29a183e4d4f0e4f56ef8b211c6219123c Mon Sep 17 00:00:00 2001
From: Kees Cook
Date: Fri, 6 Sep 2013 11:15:32 -0700
Subject: x86, build: move build output statistics away from stderr

When building on x86, the final image building step always emits stats
to stderr, even though this information is neither a warning nor an error:

  BUILD   arch/x86/boot/bzImage
Setup is 16188 bytes (padded to 16384 bytes).
System is 6368 kB
CRC cbe50c61

Validating automated builds would be cleaner if stderr did not have to
filter out these lines. Instead, change how tools/build is called, and
make the zoffset header unconditional, and write to a specified file
instead of to stdout, which can then be used for statistics, leaving
stderr open for legitimate warnings and errors, like the output from
die().

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/20130906181532.GA31260@www.outflux.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/boot/Makefile      |  3 ++-
 arch/x86/boot/tools/build.c | 40 ++++++++++++++++++++++++----------------
 2 files changed, 26 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 379814bc41e3..dce69a256896 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -71,7 +71,8 @@ GCOV_PROFILE := n
 $(obj)/bzImage: asflags-y  := $(SVGA_MODE)
 
 quiet_cmd_image = BUILD   $@
-cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/zoffset.h > $@
+cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin \
+			       $(obj)/zoffset.h $@
 
 $(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE
 	$(call if_changed,image)
diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c
index c941d6a8887f..8e15b22391fc 100644
--- a/arch/x86/boot/tools/build.c
+++ b/arch/x86/boot/tools/build.c
@@ -5,14 +5,15 @@
  */
 
 /*
- * This file builds a disk-image from two different files:
+ * This file builds a disk-image from three different files:
  *
  * - setup: 8086 machine code, sets up system parm
  * - system: 80386 code for actual system
+ * - zoffset.h: header with ZO_* defines
  *
- * It does some checking that all files are of the correct type, and
- * just writes the result to stdout, removing headers and padding to
- * the right amount. It also writes some system data to stderr.
+ * It does some checking that all files are of the correct type, and writes
+ * the result to the specified destination, removing headers and padding to
+ * the right amount. It also writes some system data to stdout.
  */
 
 /*
@@ -136,7 +137,7 @@ static void die(const char * str, ...)
 
 static void usage(void)
 {
-	die("Usage: build setup system [zoffset.h] [> image]");
+	die("Usage: build setup system zoffset.h image");
 }
 
 #ifdef CONFIG_EFI_STUB
@@ -265,7 +266,7 @@ int main(int argc, char ** argv)
 	int c;
 	u32 sys_size;
 	struct stat sb;
-	FILE *file;
+	FILE *file, *dest;
 	int fd;
 	void *kernel;
 	u32 crc = 0xffffffffUL;
@@ -280,10 +281,13 @@ int main(int argc, char ** argv)
 	startup_64 = 0x200;
 #endif
 
-	if (argc == 4)
-		parse_zoffset(argv[3]);
-	else if (argc != 3)
+	if (argc != 5)
 		usage();
+	parse_zoffset(argv[3]);
+
+	dest = fopen(argv[4], "w");
+	if (!dest)
+		die("Unable to write `%s': %m", argv[4]);
 
 	/* Copy the setup code */
 	file = fopen(argv[1], "r");
@@ -318,7 +322,7 @@ int main(int argc, char ** argv)
 	/* Set the default root device */
 	put_unaligned_le16(DEFAULT_ROOT_DEV, &buf[508]);
 
-	fprintf(stderr, "Setup is %d bytes (padded to %d bytes).\n", c, i);
+	printf("Setup is %d bytes (padded to %d bytes).\n", c, i);
 
 	/* Open and stat the kernel file */
 	fd = open(argv[2], O_RDONLY);
@@ -327,7 +331,7 @@ int main(int argc, char ** argv)
 	if (fstat(fd, &sb))
 		die("Unable to stat `%s': %m", argv[2]);
 	sz = sb.st_size;
-	fprintf (stderr, "System is %d kB\n", (sz+1023)/1024);
+	printf("System is %d kB\n", (sz+1023)/1024);
 	kernel = mmap(NULL, sz, PROT_READ, MAP_SHARED, fd, 0);
 	if (kernel == MAP_FAILED)
 		die("Unable to mmap '%s': %m", argv[2]);
@@ -348,27 +352,31 @@ int main(int argc, char ** argv)
 #endif
 
 	crc = partial_crc32(buf, i, crc);
-	if (fwrite(buf, 1, i, stdout) != i)
+	if (fwrite(buf, 1, i, dest) != i)
 		die("Writing setup failed");
 
 	/* Copy the kernel code */
 	crc = partial_crc32(kernel, sz, crc);
-	if (fwrite(kernel, 1, sz, stdout) != sz)
+	if (fwrite(kernel, 1, sz, dest) != sz)
 		die("Writing kernel failed");
 
 	/* Add padding leaving 4 bytes for the checksum */
 	while (sz++ < (sys_size*16) - 4) {
 		crc = partial_crc32_one('\0', crc);
-		if (fwrite("\0", 1, 1, stdout) != 1)
+		if (fwrite("\0", 1, 1, dest) != 1)
 			die("Writing padding failed");
 	}
 
 	/* Write the CRC */
-	fprintf(stderr, "CRC %x\n", crc);
+	printf("CRC %x\n", crc);
 	put_unaligned_le32(crc, buf);
-	if (fwrite(buf, 1, 4, stdout) != 4)
+	if (fwrite(buf, 1, 4, dest) != 4)
 		die("Writing CRC failed");
 
+	/* Catch any delayed write failures */
+	if (fclose(dest))
+		die("Writing image failed");
+
 	close(fd);
 
 	/* Everything is OK */
-- 
cgit v1.2.3


From ffde39ea61ea29fc57c15dbcfadbe545c2d3500f Mon Sep 17 00:00:00 2001
From: Linus Walleij
Date: Wed, 25 Sep 2013 15:54:11 +0200
Subject: ARM: mmp: delete the custom GPIO header

The MMP sub-architecture appears to have a custom <mach/gpio.h>
for no reason whatsoever. The file became completely empty
after Haojian removed the remaining content in
commit 157d2644cb0c1e71a18baaffca56d2b1d0ebf10f
"ARM: pxa: change gpio to platform device".

Cc: Eric Miao <eric.y.miao@gmail.com>
Acked-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/Kconfig                      | 1 -
 arch/arm/mach-mmp/include/mach/gpio.h | 8 --------
 2 files changed, 9 deletions(-)
 delete mode 100644 arch/arm/mach-mmp/include/mach/gpio.h

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3f7714d8d2d2..3950a128973e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -559,7 +559,6 @@ config ARCH_MMP
 	select GPIO_PXA
 	select IRQ_DOMAIN
 	select MULTI_IRQ_HANDLER
-	select NEED_MACH_GPIO_H
 	select PINCTRL
 	select PLAT_PXA
 	select SPARSE_IRQ
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
deleted file mode 100644
index 13219ebf5128..000000000000
--- a/arch/arm/mach-mmp/include/mach/gpio.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_MACH_GPIO_H
-#define __ASM_MACH_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#include <mach/cputype.h>
-
-#endif /* __ASM_MACH_GPIO_H */
-- 
cgit v1.2.3


From 88f718e3fa4d67f3a8dbe79a2f97d722323e4051 Mon Sep 17 00:00:00 2001
From: Linus Walleij
Date: Thu, 26 Sep 2013 10:04:49 +0200
Subject: ARM: pxa: delete the custom GPIO header

The PXA sub-architecture appears to have a custom <mach/gpio.h>
for no reason whatsoever. The file became completely empty
after Haojian removed the remaining content in
commit 157d2644cb0c1e71a18baaffca56d2b1d0ebf10f
"ARM: pxa: change gpio to platform device".

That commit added these two lines:

However it seems like deleting the file has no effect
whatsoever on the kernel compilation.

Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/Kconfig                      |  1 -
 arch/arm/mach-pxa/include/mach/gpio.h | 32 --------------------------------
 2 files changed, 33 deletions(-)
 delete mode 100644 arch/arm/mach-pxa/include/mach/gpio.h

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3950a128973e..1ced44456ad2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -621,7 +621,6 @@ config ARCH_PXA
 	select GPIO_PXA
 	select HAVE_IDE
 	select MULTI_IRQ_HANDLER
-	select NEED_MACH_GPIO_H
 	select PLAT_PXA
 	select SPARSE_IRQ
 	help
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
deleted file mode 100644
index 0248e433bc98..000000000000
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/gpio.h
- *
- * PXA GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_PXA_GPIO_H
-#define __ASM_ARCH_PXA_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-
-#endif
-- 
cgit v1.2.3


From 8040dd09c2ca7e70daf84f040beb3ced9602fce5 Mon Sep 17 00:00:00 2001
From: Linus Walleij
Date: Tue, 10 Sep 2013 11:19:55 +0200
Subject: ARM: ixp4xx: convert remaining users to use gpiolib

A few call sites inside mach-ixp4xx were still using the custom
ixp4xx GPIO API with gpio_line_* accessors, convert all these
to use the standard gpiolib functions instead. Also attempt to
request and label all GPIOs before use. Move the GPIO requests
to per-machine device_initcalls() so we are not dependent on the
GPIO chip to be available at machine_init time.

Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/mach-ixp4xx/dsmg600-setup.c | 65 +++++++++++++++++++++---------------
 arch/arm/mach-ixp4xx/ixdp425-setup.c |  8 +++--
 arch/arm/mach-ixp4xx/nas100d-setup.c | 49 ++++++++++++++++-----------
 arch/arm/mach-ixp4xx/nslu2-setup.c   | 17 +++++++---
 4 files changed, 85 insertions(+), 54 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 63de1b3fd06b..736dc692d540 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -26,6 +26,7 @@
 #include <linux/reboot.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 
@@ -161,11 +162,8 @@ static struct platform_device *dsmg600_devices[] __initdata = {
 
 static void dsmg600_power_off(void)
 {
-	/* enable the pwr cntl gpio */
-	gpio_line_config(DSMG600_PO_GPIO, IXP4XX_GPIO_OUT);
-
-	/* poweroff */
-	gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
+	/* enable the pwr cntl and drive it high */
+	gpio_direction_output(DSMG600_PO_GPIO, 1);
 }
 
 /* This is used to make sure the power-button pusher is serious.  The button
@@ -202,7 +200,7 @@ static void dsmg600_power_handler(unsigned long data)
 			ctrl_alt_del();
 
 			/* Change the state of the power LED to "blink" */
-			gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
+			gpio_set_value(DSMG600_LED_PWR_GPIO, 0);
 		} else {
 			power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
 		}
@@ -228,6 +226,40 @@ static void __init dsmg600_timer_init(void)
     ixp4xx_timer_init();
 }
 
+static int __init dsmg600_gpio_init(void)
+{
+	if (!machine_is_dsmg600())
+		return 0;
+
+	gpio_request(DSMG600_RB_GPIO, "reset button");
+	if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
+		IRQF_DISABLED | IRQF_TRIGGER_LOW,
+		"DSM-G600 reset button", NULL) < 0) {
+
+		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+			gpio_to_irq(DSMG600_RB_GPIO));
+	}
+
+	/*
+	 * The power button on the D-Link DSM-G600 is on GPIO 15, but
+	 * it cannot handle interrupts on that GPIO line.  So we'll
+	 * have to poll it with a kernel timer.
+	 */
+
+	/* Make sure that the power button GPIO is set up as an input */
+	gpio_request(DSMG600_PB_GPIO, "power button");
+	gpio_direction_input(DSMG600_PB_GPIO);
+	/* Request poweroff GPIO line */
+	gpio_request(DSMG600_PO_GPIO, "power off button");
+
+	/* Set the initial value for the power button IRQ handler */
+	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+
+	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
+	return 0;
+}
+device_initcall(dsmg600_gpio_init);
+
 static void __init dsmg600_init(void)
 {
 	ixp4xx_sys_init();
@@ -251,27 +283,6 @@ static void __init dsmg600_init(void)
 	platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
 
 	pm_power_off = dsmg600_power_off;
-
-	if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
-		IRQF_DISABLED | IRQF_TRIGGER_LOW,
-		"DSM-G600 reset button", NULL) < 0) {
-
-		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-			gpio_to_irq(DSMG600_RB_GPIO));
-	}
-
-	/* The power button on the D-Link DSM-G600 is on GPIO 15, but
-	 * it cannot handle interrupts on that GPIO line.  So we'll
-	 * have to poll it with a kernel timer.
-	 */
-
-	/* Make sure that the power button GPIO is set up as an input */
-	gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
-
-	/* Set the initial value for the power button IRQ handler */
-	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-
-	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
 }
 
 MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 22d688b7d513..e7b8befa8729 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -20,6 +20,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -80,10 +81,10 @@ ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		if (ctrl & NAND_NCE) {
-			gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_LOW);
+			gpio_set_value(IXDP425_NAND_NCE_PIN, 0);
 			udelay(5);
 		} else
-			gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_HIGH);
+			gpio_set_value(IXDP425_NAND_NCE_PIN, 1);
 
 		offset = (ctrl & NAND_CLE) ? IXDP425_NAND_CMD_BYTE : 0;
 		offset |= (ctrl & NAND_ALE) ? IXDP425_NAND_ADDR_BYTE : 0;
@@ -227,7 +228,8 @@ static void __init ixdp425_init(void)
 	ixdp425_flash_nand_resource.start = IXP4XX_EXP_BUS_BASE(3),
 	ixdp425_flash_nand_resource.end   = IXP4XX_EXP_BUS_BASE(3) + 0x10 - 1;
 
-	gpio_line_config(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_OUT);
+	gpio_request(IXDP425_NAND_NCE_PIN, "NAND NCE pin");
+	gpio_direction_output(IXDP425_NAND_NCE_PIN, 0);
 
 	/* Configure expansion bus for NAND Flash */
 	*IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN |
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index ed667ce9f576..507cb5233537 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -184,11 +184,8 @@ static void nas100d_power_off(void)
 {
 	/* This causes the box to drop the power and go dead. */
 
-	/* enable the pwr cntl gpio */
-	gpio_line_config(NAS100D_PO_GPIO, IXP4XX_GPIO_OUT);
-
-	/* do the deed */
-	gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH);
+	/* enable the pwr cntl gpio and assert power off */
+	gpio_direction_output(NAS100D_PO_GPIO, 1);
 }
 
 /* This is used to make sure the power-button pusher is serious.  The button
@@ -225,7 +222,7 @@ static void nas100d_power_handler(unsigned long data)
 			ctrl_alt_del();
 
 			/* Change the state of the power LED to "blink" */
-			gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
+			gpio_set_value(NAS100D_LED_PWR_GPIO, 0);
 		} else {
 			power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
 		}
@@ -242,6 +239,33 @@ static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int __init nas100d_gpio_init(void)
+{
+	if (!machine_is_nas100d())
+		return 0;
+
+	/*
+	 * The power button on the Iomega NAS100d is on GPIO 14, but
+	 * it cannot handle interrupts on that GPIO line.  So we'll
+	 * have to poll it with a kernel timer.
+	 */
+
+	/* Request the power off GPIO */
+	gpio_request(NAS100D_PO_GPIO, "power off");
+
+	/* Make sure that the power button GPIO is set up as an input */
+	gpio_request(NAS100D_PB_GPIO, "power button");
+	gpio_direction_input(NAS100D_PB_GPIO);
+
+	/* Set the initial value for the power button IRQ handler */
+	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+
+	mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
+
+	return 0;
+}
+device_initcall(nas100d_gpio_init);
+
 static void __init nas100d_init(void)
 {
 	uint8_t __iomem *f;
@@ -278,19 +302,6 @@ static void __init nas100d_init(void)
 			gpio_to_irq(NAS100D_RB_GPIO));
 	}
 
-	/* The power button on the Iomega NAS100d is on GPIO 14, but
-	 * it cannot handle interrupts on that GPIO line.  So we'll
-	 * have to poll it with a kernel timer.
-	 */
-
-	/* Make sure that the power button GPIO is set up as an input */
-	gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN);
-
-	/* Set the initial value for the power button IRQ handler */
-	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-
-	mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
-
 	/*
 	 * Map in a portion of the flash and read the MAC address.
 	 * Since it is stored in BE in the flash itself, we need to
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 7e55236c26ea..ba5f1cda2a9d 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -197,11 +197,8 @@ static void nslu2_power_off(void)
 {
 	/* This causes the box to drop the power and go dead. */
 
-	/* enable the pwr cntl gpio */
-	gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT);
-
-	/* do the deed */
-	gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
+	/* enable the pwr cntl gpio and assert power off */
+	gpio_direction_output(NSLU2_PO_GPIO, 1);
 }
 
 static irqreturn_t nslu2_power_handler(int irq, void *dev_id)
@@ -223,6 +220,16 @@ static irqreturn_t nslu2_reset_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int __init nslu2_gpio_init(void)
+{
+	if (!machine_is_nslu2())
+		return 0;
+
+	/* Request the power off GPIO */
+	return gpio_request(NSLU2_PO_GPIO, "power off");
+}
+device_initcall(nslu2_gpio_init);
+
 static void __init nslu2_timer_init(void)
 {
     /* The xtal on this machine is non-standard. */
-- 
cgit v1.2.3


From 81ded3c11eeb167c38406247914533872a82db8c Mon Sep 17 00:00:00 2001
From: Linus Walleij
Date: Tue, 10 Sep 2013 13:39:03 +0200
Subject: ARM: ixp4: delete irq_to_gpio

This dangerous function is not used in the kernel, so let's
just delete it.

Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/mach-ixp4xx/common.c | 11 -----------
 1 file changed, 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 5327decde5a0..8708ac8f3614 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -117,17 +117,6 @@ static int ixp4xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
 	return -EINVAL;
 }
 
-int irq_to_gpio(unsigned int irq)
-{
-	int gpio = (irq < 32) ? irq2gpio[irq] : -EINVAL;
-
-	if (gpio == -1)
-		return -EINVAL;
-
-	return gpio;
-}
-EXPORT_SYMBOL(irq_to_gpio);
-
 static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type)
 {
 	int line = irq2gpio[d->irq];
-- 
cgit v1.2.3


From 098e30f6558f8950ed851e874d08bab91c9d4be7 Mon Sep 17 00:00:00 2001
From: Linus Walleij
Date: Tue, 10 Sep 2013 14:10:13 +0200
Subject: ARM: ixp4xx: stop broadcasting the custom GPIO API

Now that these custom GPIO accessors are only used from the
gpio chip in this machine, move the code out of the include
file and right next to the gpiochip implementation.

Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/mach-ixp4xx/common.c                | 38 +++++++++++++++++++++++++++
 arch/arm/mach-ixp4xx/include/mach/platform.h | 39 ----------------------------
 2 files changed, 38 insertions(+), 39 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 8708ac8f3614..9edaf4734fa8 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -81,6 +81,44 @@ void __init ixp4xx_map_io(void)
   	iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
 }
 
+/*
+ * GPIO-functions
+ */
+/*
+ * The following converted to the real HW bits the gpio_line_config
+ */
+/* GPIO pin types */
+#define IXP4XX_GPIO_OUT 		0x1
+#define IXP4XX_GPIO_IN  		0x2
+
+/* GPIO signal types */
+#define IXP4XX_GPIO_LOW			0
+#define IXP4XX_GPIO_HIGH		1
+
+/* GPIO Clocks */
+#define IXP4XX_GPIO_CLK_0		14
+#define IXP4XX_GPIO_CLK_1		15
+
+static void gpio_line_config(u8 line, u32 direction)
+{
+	if (direction == IXP4XX_GPIO_IN)
+		*IXP4XX_GPIO_GPOER |= (1 << line);
+	else
+		*IXP4XX_GPIO_GPOER &= ~(1 << line);
+}
+
+static void gpio_line_get(u8 line, int *value)
+{
+	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
+}
+
+static void gpio_line_set(u8 line, int value)
+{
+	if (value == IXP4XX_GPIO_HIGH)
+	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
+	else if (value == IXP4XX_GPIO_LOW)
+	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
+}
 
 /*************************************************************************
  * IXP4xx chipset IRQ handling
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index 4c4c6a6f4526..75c4c6572ad0 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -131,44 +131,5 @@ struct pci_sys_data;
 extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
 extern struct pci_ops ixp4xx_ops;
 
-/*
- * GPIO-functions
- */
-/*
- * The following converted to the real HW bits the gpio_line_config
- */
-/* GPIO pin types */
-#define IXP4XX_GPIO_OUT 		0x1
-#define IXP4XX_GPIO_IN  		0x2
-
-/* GPIO signal types */
-#define IXP4XX_GPIO_LOW			0
-#define IXP4XX_GPIO_HIGH		1
-
-/* GPIO Clocks */
-#define IXP4XX_GPIO_CLK_0		14
-#define IXP4XX_GPIO_CLK_1		15
-
-static inline void gpio_line_config(u8 line, u32 direction)
-{
-	if (direction == IXP4XX_GPIO_IN)
-		*IXP4XX_GPIO_GPOER |= (1 << line);
-	else
-		*IXP4XX_GPIO_GPOER &= ~(1 << line);
-}
-
-static inline void gpio_line_get(u8 line, int *value)
-{
-	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
-}
-
-static inline void gpio_line_set(u8 line, int value)
-{
-	if (value == IXP4XX_GPIO_HIGH)
-	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
-	else if (value == IXP4XX_GPIO_LOW)
-	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
-}
-
 #endif // __ASSEMBLY__
 
-- 
cgit v1.2.3


From 75f93fed50c2abadbab6ef546b265f51ca975b27 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra
Date: Fri, 27 Sep 2013 17:30:03 +0200
Subject: sched: Revert need_resched() to look at TIF_NEED_RESCHED

Yuanhan reported a serious throughput regression in his pigz
benchmark. Using the ftrace patch I found that several idle
paths need more TLC before we can switch the generic
need_resched() over to preempt_need_resched.

The preemption paths benefit most from preempt_need_resched and
do indeed use it; all other need_resched() users don't really
care that much so reverting need_resched() back to
tif_need_resched() is the simple and safe solution.

Reported-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: lkp@linux.intel.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20130927153003.GF15690@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/include/asm/preempt.h | 8 --------
 include/asm-generic/preempt.h  | 8 --------
 include/linux/sched.h          | 5 +++++
 3 files changed, 5 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/preempt.h b/arch/x86/include/asm/preempt.h
index 1de41690ff99..8729723636fd 100644
--- a/arch/x86/include/asm/preempt.h
+++ b/arch/x86/include/asm/preempt.h
@@ -79,14 +79,6 @@ static __always_inline bool __preempt_count_dec_and_test(void)
 	GEN_UNARY_RMWcc("decl", __preempt_count, __percpu_arg(0), "e");
 }
 
-/*
- * Returns true when we need to resched -- even if we can not.
- */
-static __always_inline bool need_resched(void)
-{
-	return unlikely(test_preempt_need_resched());
-}
-
 /*
  * Returns true when we need to resched and can (barring IRQ state).
  */
diff --git a/include/asm-generic/preempt.h b/include/asm-generic/preempt.h
index 5dc14ed3791c..ddf2b420ac8f 100644
--- a/include/asm-generic/preempt.h
+++ b/include/asm-generic/preempt.h
@@ -84,14 +84,6 @@ static __always_inline bool __preempt_count_dec_and_test(void)
 	return !--*preempt_count_ptr();
 }
 
-/*
- * Returns true when we need to resched -- even if we can not.
- */
-static __always_inline bool need_resched(void)
-{
-	return unlikely(test_preempt_need_resched());
-}
-
 /*
  * Returns true when we need to resched and can (barring IRQ state).
  */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index b09798b672f3..2ac5285db434 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -2577,6 +2577,11 @@ static inline bool __must_check current_clr_polling_and_test(void)
 }
 #endif
 
+static __always_inline bool need_resched(void)
+{
+	return unlikely(tif_need_resched());
+}
+
 /*
  * Thread group CPU time accounting.
  */
-- 
cgit v1.2.3


From 646e29a1789a3a936871008c15199c50367bf291 Mon Sep 17 00:00:00 2001
From: Borislav Petkov
Date: Fri, 27 Sep 2013 16:35:54 +0200
Subject: x86: Improve the printout of the SMP bootup CPU table

As the new x86 CPU bootup printout format code maintainer, I am
taking immediate action to improve and clean (and thus indulge
my OCD) the reporting of the cores when coming up online.

Fix padding to a right-hand alignment, cleanup code and bind
reporting width to the max number of supported CPUs on the
system, like this:

 [    0.074509] smpboot: Booting Node   0, Processors:      #1  #2  #3  #4  #5  #6  #7 OK
 [    0.644008] smpboot: Booting Node   1, Processors:  #8  #9 #10 #11 #12 #13 #14 #15 OK
 [    1.245006] smpboot: Booting Node   2, Processors: #16 #17 #18 #19 #20 #21 #22 #23 OK
 [    1.864005] smpboot: Booting Node   3, Processors: #24 #25 #26 #27 #28 #29 #30 #31 OK
 [    2.489005] smpboot: Booting Node   4, Processors: #32 #33 #34 #35 #36 #37 #38 #39 OK
 [    3.093005] smpboot: Booting Node   5, Processors: #40 #41 #42 #43 #44 #45 #46 #47 OK
 [    3.698005] smpboot: Booting Node   6, Processors: #48 #49 #50 #51 #52 #53 #54 #55 OK
 [    4.304005] smpboot: Booting Node   7, Processors: #56 #57 #58 #59 #60 #61 #62 #63 OK
 [    4.961413] Brought up 64 CPUs

and this:

 [    0.072367] smpboot: Booting Node   0, Processors:    #1 #2 #3 #4 #5 #6 #7 OK
 [    0.686329] Brought up 8 CPUs

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Libin <huawei.libin@huawei.com>
Cc: wangyijing@huawei.com
Cc: fenghua.yu@intel.com
Cc: guohanjun@huawei.com
Cc: paul.gortmaker@windriver.com
Link: http://lkml.kernel.org/r/20130927143554.GF4422@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/include/asm/misc.h |  6 ++++++
 arch/x86/kernel/smpboot.c   | 21 +++++++++++++++------
 arch/x86/lib/Makefile       |  2 +-
 arch/x86/lib/misc.c         | 11 +++++++++++
 4 files changed, 33 insertions(+), 7 deletions(-)
 create mode 100644 arch/x86/include/asm/misc.h
 create mode 100644 arch/x86/lib/misc.c

(limited to 'arch')

diff --git a/arch/x86/include/asm/misc.h b/arch/x86/include/asm/misc.h
new file mode 100644
index 000000000000..475f5bbc7f53
--- /dev/null
+++ b/arch/x86/include/asm/misc.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_X86_MISC_H
+#define _ASM_X86_MISC_H
+
+int num_digits(int val);
+
+#endif /* _ASM_X86_MISC_H */
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 6cacab671f9b..d41f3ba26ced 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -73,11 +73,10 @@
 #include <asm/setup.h>
 #include <asm/uv/uv.h>
 #include <linux/mc146818rtc.h>
-
 #include <asm/smpboot_hooks.h>
 #include <asm/i8259.h>
-
 #include <asm/realmode.h>
+#include <asm/misc.h>
 
 /* State of each CPU */
 DEFINE_PER_CPU(int, cpu_state) = { 0 };
@@ -653,17 +652,27 @@ static void announce_cpu(int cpu, int apicid)
 {
 	static int current_node = -1;
 	int node = early_cpu_to_node(cpu);
-	int max_cpu_present = find_last_bit(cpumask_bits(cpu_present_mask), NR_CPUS);
+	static int width;
+
+	if (!width)
+		width = num_digits(num_possible_cpus()) + 1; /* + '#' sign */
 
 	if (system_state == SYSTEM_BOOTING) {
 		if (node != current_node) {
 			if (current_node > (-1))
 				pr_cont(" OK\n");
 			current_node = node;
-			pr_info("Booting Node %3d, Processors ", node);
+			pr_info("Booting Node %3d, Processors:", node);
 		}
-		pr_cont(" #%4d%s", cpu, cpu == max_cpu_present ? " OK\n" : "");
-		return;
+
+		/* Add padding for the BSP */
+		if (cpu == 1)
+			pr_cont("%*s", width + 1, " ");
+
+		pr_cont("%*s#%d", width - num_digits(cpu), " ", cpu);
+
+		if (cpu == num_present_cpus() - 1)
+			pr_cont(" OK\n");
 	} else
 		pr_info("Booting Node %d Processor %d APIC 0x%x\n",
 			node, cpu, apicid);
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 96b2c6697c9d..992d63bb154f 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -16,7 +16,7 @@ clean-files := inat-tables.c
 
 obj-$(CONFIG_SMP) += msr-smp.o cache-smp.o
 
-lib-y := delay.o
+lib-y := delay.o misc.o
 lib-y += thunk_$(BITS).o
 lib-y += usercopy_$(BITS).o usercopy.o getuser.o putuser.o
 lib-y += memcpy_$(BITS).o
diff --git a/arch/x86/lib/misc.c b/arch/x86/lib/misc.c
new file mode 100644
index 000000000000..bc35cde9769f
--- /dev/null
+++ b/arch/x86/lib/misc.c
@@ -0,0 +1,11 @@
+int num_digits(int val)
+{
+	int digits = 0;
+
+	while (val) {
+		val /= 10;
+		digits++;
+	}
+
+	return digits;
+}
-- 
cgit v1.2.3


From d2078d5adbe227d64d7963d93f13479c890a9a16 Mon Sep 17 00:00:00 2001
From: Linn Crosetto
Date: Sun, 22 Sep 2013 19:59:08 -0600
Subject: x86: EFI stub support for large memory maps

This patch fixes a problem with EFI memory maps larger than 128 entries
when booting using the EFI stub, which results in overflowing e820_map
in boot_params and an eventual halt when checking the map size in
sanitize_e820_map().

If the number of map entries is greater than what can fit in e820_map,
add the extra entries to the setup_data list using type SETUP_E820_EXT.
These extra entries are then picked up when the setup_data list is
parsed in parse_e820_ext().

Signed-off-by: Linn Crosetto <linn@hp.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/x86/boot/compressed/eboot.c | 222 ++++++++++++++++++++++++++++-----------
 1 file changed, 161 insertions(+), 61 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index beb07a4529ac..5c0dc55f2387 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -519,71 +519,47 @@ fail:
 	return NULL;
 }
 
-static efi_status_t exit_boot(struct boot_params *boot_params,
-			      void *handle)
+static void add_e820ext(struct boot_params *params,
+			struct setup_data *e820ext, u32 nr_entries)
 {
-	struct efi_info *efi = &boot_params->efi_info;
-	struct e820entry *e820_map = &boot_params->e820_map[0];
-	struct e820entry *prev = NULL;
-	unsigned long size, key, desc_size, _size;
-	efi_memory_desc_t *mem_map;
+	struct setup_data *data;
 	efi_status_t status;
-	__u32 desc_version;
-	bool called_exit = false;
-	u8 nr_entries;
-	int i;
-
-get_map:
-	status = efi_get_memory_map(sys_table, &mem_map, &size, &desc_size,
-				    &desc_version, &key);
-
-	if (status != EFI_SUCCESS)
-		return status;
+	unsigned long size;
 
-	memcpy(&efi->efi_loader_signature, EFI_LOADER_SIGNATURE, sizeof(__u32));
-	efi->efi_systab = (unsigned long)sys_table;
-	efi->efi_memdesc_size = desc_size;
-	efi->efi_memdesc_version = desc_version;
-	efi->efi_memmap = (unsigned long)mem_map;
-	efi->efi_memmap_size = size;
+	e820ext->type = SETUP_E820_EXT;
+	e820ext->len = nr_entries * sizeof(struct e820entry);
+	e820ext->next = 0;
 
-#ifdef CONFIG_X86_64
-	efi->efi_systab_hi = (unsigned long)sys_table >> 32;
-	efi->efi_memmap_hi = (unsigned long)mem_map >> 32;
-#endif
+	data = (struct setup_data *)(unsigned long)params->hdr.setup_data;
 
-	/* Might as well exit boot services now */
-	status = efi_call_phys2(sys_table->boottime->exit_boot_services,
-				handle, key);
-	if (status != EFI_SUCCESS) {
-		/*
-		 * ExitBootServices() will fail if any of the event
-		 * handlers change the memory map. In which case, we
-		 * must be prepared to retry, but only once so that
-		 * we're guaranteed to exit on repeated failures instead
-		 * of spinning forever.
-		 */
-		if (called_exit)
-			goto free_mem_map;
+	while (data && data->next)
+		data = (struct setup_data *)(unsigned long)data->next;
 
-		called_exit = true;
-		efi_call_phys1(sys_table->boottime->free_pool, mem_map);
-		goto get_map;
-	}
+	if (data)
+		data->next = (unsigned long)e820ext;
+	else
+		params->hdr.setup_data = (unsigned long)e820ext;
+}
 
-	/* Historic? */
-	boot_params->alt_mem_k = 32 * 1024;
+static efi_status_t setup_e820(struct boot_params *params,
+			       struct setup_data *e820ext, u32 e820ext_size)
+{
+	struct e820entry *e820_map = &params->e820_map[0];
+	struct efi_info *efi = &params->efi_info;
+	struct e820entry *prev = NULL;
+	u32 nr_entries;
+	u32 nr_desc;
+	int i;
 
-	/*
-	 * Convert the EFI memory map to E820.
-	 */
 	nr_entries = 0;
-	for (i = 0; i < size / desc_size; i++) {
+	nr_desc = efi->efi_memmap_size / efi->efi_memdesc_size;
+
+	for (i = 0; i < nr_desc; i++) {
 		efi_memory_desc_t *d;
 		unsigned int e820_type = 0;
-		unsigned long m = (unsigned long)mem_map;
+		unsigned long m = efi->efi_memmap;
 
-		d = (efi_memory_desc_t *)(m + (i * desc_size));
+		d = (efi_memory_desc_t *)(m + (i * efi->efi_memdesc_size));
 		switch (d->type) {
 		case EFI_RESERVED_TYPE:
 		case EFI_RUNTIME_SERVICES_CODE:
@@ -620,18 +596,142 @@ get_map:
 
 		/* Merge adjacent mappings */
 		if (prev && prev->type == e820_type &&
-		    (prev->addr + prev->size) == d->phys_addr)
+		    (prev->addr + prev->size) == d->phys_addr) {
 			prev->size += d->num_pages << 12;
-		else {
-			e820_map->addr = d->phys_addr;
-			e820_map->size = d->num_pages << 12;
-			e820_map->type = e820_type;
-			prev = e820_map++;
-			nr_entries++;
+			continue;
 		}
+
+		if (nr_entries == ARRAY_SIZE(params->e820_map)) {
+			u32 need = (nr_desc - i) * sizeof(struct e820entry) +
+				   sizeof(struct setup_data);
+
+			if (!e820ext || e820ext_size < need)
+				return EFI_BUFFER_TOO_SMALL;
+
+			/* boot_params map full, switch to e820 extended */
+			e820_map = (struct e820entry *)e820ext->data;
+		}
+
+		e820_map->addr = d->phys_addr;
+		e820_map->size = d->num_pages << PAGE_SHIFT;
+		e820_map->type = e820_type;
+		prev = e820_map++;
+		nr_entries++;
 	}
 
-	boot_params->e820_entries = nr_entries;
+	if (nr_entries > ARRAY_SIZE(params->e820_map)) {
+		u32 nr_e820ext = nr_entries - ARRAY_SIZE(params->e820_map);
+
+		add_e820ext(params, e820ext, nr_e820ext);
+		nr_entries -= nr_e820ext;
+	}
+
+	params->e820_entries = (u8)nr_entries;
+
+	return EFI_SUCCESS;
+}
+
+static efi_status_t alloc_e820ext(u32 nr_desc, struct setup_data **e820ext,
+				  u32 *e820ext_size)
+{
+	efi_status_t status;
+	unsigned long size;
+
+	size = sizeof(struct setup_data) +
+		sizeof(struct e820entry) * nr_desc;
+
+	if (*e820ext) {
+		efi_call_phys1(sys_table->boottime->free_pool, *e820ext);
+		*e820ext = NULL;
+		*e820ext_size = 0;
+	}
+
+	status = efi_call_phys3(sys_table->boottime->allocate_pool,
+				EFI_LOADER_DATA, size, e820ext);
+
+	if (status == EFI_SUCCESS)
+		*e820ext_size = size;
+
+	return status;
+}
+
+static efi_status_t exit_boot(struct boot_params *boot_params,
+			      void *handle)
+{
+	struct efi_info *efi = &boot_params->efi_info;
+	unsigned long map_sz, key, desc_size;
+	efi_memory_desc_t *mem_map;
+	struct setup_data *e820ext;
+	__u32 e820ext_size;
+	__u32 nr_desc, prev_nr_desc;
+	efi_status_t status;
+	__u32 desc_version;
+	bool called_exit = false;
+	u8 nr_entries;
+	int i;
+
+	nr_desc = 0;
+	e820ext = NULL;
+	e820ext_size = 0;
+
+get_map:
+	status = efi_get_memory_map(sys_table, &mem_map, &map_sz, &desc_size,
+				    &desc_version, &key);
+
+	if (status != EFI_SUCCESS)
+		return status;
+
+	prev_nr_desc = nr_desc;
+	nr_desc = map_sz / desc_size;
+	if (nr_desc > prev_nr_desc &&
+	    nr_desc > ARRAY_SIZE(boot_params->e820_map)) {
+		u32 nr_e820ext = nr_desc - ARRAY_SIZE(boot_params->e820_map);
+
+		status = alloc_e820ext(nr_e820ext, &e820ext, &e820ext_size);
+		if (status != EFI_SUCCESS)
+			goto free_mem_map;
+
+		efi_call_phys1(sys_table->boottime->free_pool, mem_map);
+		goto get_map; /* Allocated memory, get map again */
+	}
+
+	memcpy(&efi->efi_loader_signature, EFI_LOADER_SIGNATURE, sizeof(__u32));
+	efi->efi_systab = (unsigned long)sys_table;
+	efi->efi_memdesc_size = desc_size;
+	efi->efi_memdesc_version = desc_version;
+	efi->efi_memmap = (unsigned long)mem_map;
+	efi->efi_memmap_size = map_sz;
+
+#ifdef CONFIG_X86_64
+	efi->efi_systab_hi = (unsigned long)sys_table >> 32;
+	efi->efi_memmap_hi = (unsigned long)mem_map >> 32;
+#endif
+
+	/* Might as well exit boot services now */
+	status = efi_call_phys2(sys_table->boottime->exit_boot_services,
+				handle, key);
+	if (status != EFI_SUCCESS) {
+		/*
+		 * ExitBootServices() will fail if any of the event
+		 * handlers change the memory map. In which case, we
+		 * must be prepared to retry, but only once so that
+		 * we're guaranteed to exit on repeated failures instead
+		 * of spinning forever.
+		 */
+		if (called_exit)
+			goto free_mem_map;
+
+		called_exit = true;
+		efi_call_phys1(sys_table->boottime->free_pool, mem_map);
+		goto get_map;
+	}
+
+	/* Historic? */
+	boot_params->alt_mem_k = 32 * 1024;
+
+	status = setup_e820(boot_params, e820ext, e820ext_size);
+	if (status != EFI_SUCCESS)
+		return status;
 
 	return EFI_SUCCESS;
 
-- 
cgit v1.2.3


From 0ce6cda2c75d64175394341ef60e6e1d27dd9c10 Mon Sep 17 00:00:00 2001
From: Bart Kuivenhoven
Date: Mon, 23 Sep 2013 11:45:28 +0200
Subject: x86 efi: bugfix interrupt disabling sequence

The problem in efi_main was that the idt was cleared before the
interrupts were disabled.

The UEFI spec states that interrupts aren't used so this shouldn't be
too much of a problem. Peripherals however don't necessarily know about
this and thus might cause interrupts to happen anyway. Even if
ExitBootServices() has been called.

This means there is a risk of an interrupt being triggered while the IDT
register is nullified and the interrupt bit hasn't been cleared,
allowing for a triple fault.

This patch disables the interrupt flag, while leaving the existing IDT
in place. The CPU won't care about the IDT at all as long as the
interrupt bit is off, so it's safe to leave it in place as nothing will
ever happen to it.

[ Removed the now unused 'idt' variable - Matt ]

Signed-off-by: Bart Kuivenhoven <bemk@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/x86/boot/compressed/eboot.c | 17 ++---------------
 1 file changed, 2 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index 5c0dc55f2387..a7677babf946 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -748,7 +748,7 @@ free_mem_map:
 struct boot_params *efi_main(void *handle, efi_system_table_t *_table,
 			     struct boot_params *boot_params)
 {
-	struct desc_ptr *gdt, *idt;
+	struct desc_ptr *gdt;
 	efi_loaded_image_t *image;
 	struct setup_header *hdr = &boot_params->hdr;
 	efi_status_t status;
@@ -780,17 +780,6 @@ struct boot_params *efi_main(void *handle, efi_system_table_t *_table,
 		goto fail;
 	}
 
-	status = efi_call_phys3(sys_table->boottime->allocate_pool,
-				EFI_LOADER_DATA, sizeof(*idt),
-				(void **)&idt);
-	if (status != EFI_SUCCESS) {
-		efi_printk(sys_table, "Failed to alloc mem for idt structure\n");
-		goto fail;
-	}
-
-	idt->size = 0;
-	idt->address = 0;
-
 	/*
 	 * If the kernel isn't already loaded at the preferred load
 	 * address, relocate it.
@@ -865,10 +854,8 @@ struct boot_params *efi_main(void *handle, efi_system_table_t *_table,
 	desc->base2 = 0x00;
 #endif /* CONFIG_X86_64 */
 
-	asm volatile ("lidt %0" : : "m" (*idt));
-	asm volatile ("lgdt %0" : : "m" (*gdt));
-
 	asm volatile("cli");
+	asm volatile ("lgdt %0" : : "m" (*gdt));
 
 	return boot_params;
 fail:
-- 
cgit v1.2.3


From 554b0004d0ec4fbd11e08668dfc400f211e8d5c5 Mon Sep 17 00:00:00 2001
From: Kevin Hilman
Date: Mon, 16 Sep 2013 15:28:21 -0700
Subject: vtime: Add HAVE_VIRT_CPU_ACCOUNTING_GEN Kconfig

With VIRT_CPU_ACCOUNTING_GEN, cputime_t becomes 64-bit. In order
to use that feature, arch code should be audited to ensure there are no
races in concurrent read/write of cputime_t. For example,
reading/writing 64-bit cputime_t on some 32-bit arches may require
multiple accesses for low and high value parts, so proper locking
is needed to protect against concurrent accesses.

Therefore, add CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN which arches can
enable after they've been audited for potential races.

This option is automatically enabled on 64-bit platforms.

Feature requested by Frederic Weisbecker.

Signed-off-by: Kevin Hilman <khilman@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Arm Linux <linux-arm-kernel@lists.infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/Kconfig        | 12 ++++++++++++
 init/Kconfig        |  1 +
 kernel/time/Kconfig |  1 +
 3 files changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/Kconfig b/arch/Kconfig
index af2cc6eabcc7..185f8b007643 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -353,6 +353,18 @@ config HAVE_CONTEXT_TRACKING
 config HAVE_VIRT_CPU_ACCOUNTING
 	bool
 
+config HAVE_VIRT_CPU_ACCOUNTING_GEN
+	bool
+	default y if 64BIT
+	help
+	  With VIRT_CPU_ACCOUNTING_GEN, cputime_t becomes 64-bit.
+	  Before enabling this option, arch code must be audited
+	  to ensure there are no races in concurrent read/write of
+	  cputime_t. For example, reading/writing 64-bit cputime_t on
+	  some 32-bit arches may require multiple accesses, so proper
+	  locking is needed to protect against concurrent accesses.
+
+
 config HAVE_IRQ_TIME_ACCOUNTING
 	bool
 	help
diff --git a/init/Kconfig b/init/Kconfig
index 3ecd8a1178f1..68c1a0ed704d 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -355,6 +355,7 @@ config VIRT_CPU_ACCOUNTING_NATIVE
 config VIRT_CPU_ACCOUNTING_GEN
 	bool "Full dynticks CPU time accounting"
 	depends on HAVE_CONTEXT_TRACKING && 64BIT
+	depends on HAVE_VIRT_CPU_ACCOUNTING_GEN
 	select VIRT_CPU_ACCOUNTING
 	select CONTEXT_TRACKING
 	help
diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index 2b62fe86f9ec..f148475e5194 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -101,6 +101,7 @@ config NO_HZ_FULL
 	depends on HAVE_CONTEXT_TRACKING
 	# VIRT_CPU_ACCOUNTING_GEN dependency
 	depends on 64BIT
+	depends on HAVE_VIRT_CPU_ACCOUNTING_GEN
 	select NO_HZ_COMMON
 	select RCU_USER_QS
 	select RCU_NOCB_CPU
-- 
cgit v1.2.3


From 31c1fc8187158cb80ccd57c19e024c55af901797 Mon Sep 17 00:00:00 2001
From: Kevin Hilman
Date: Mon, 16 Sep 2013 15:28:22 -0700
Subject: ARM: Kconfig: allow full nohz CPU accounting

With the 64-bit requirement removed from VIRT_CPU_ACCOUNTING_GEN,
allow ARM platforms to enable it.  Since VIRT_CPU_ACCOUNTING_GEN is a
dependency for full NO_HZ, this allows ARM platforms to enable full
NO_HZ as well.

Signed-off-by: Kevin Hilman <khilman@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Arm Linux <linux-arm-kernel@lists.infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/arm/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1ad6fb6c094d..323baf07fdce 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -54,6 +54,7 @@ config ARM
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
+	select HAVE_VIRT_CPU_ACCOUNTING_GEN
 	select IRQ_FORCED_THREADING
 	select KTIME_SCALAR
 	select MODULES_USE_ELF_REL
-- 
cgit v1.2.3


From a72be8b89eb97655ea9b474bc7d6306672a922c2 Mon Sep 17 00:00:00 2001
From: Linus Walleij
Date: Tue, 1 Oct 2013 10:28:58 +0200
Subject: ARM: w90x900: delete <mach/gpio.h>

The local <mach/gpio.h> file on the w90x900 is completely unused
and the platform does not define NEED_MACH_GPIO_H.

Cc: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/mach-w90x900/include/mach/gpio.h | 30 ------------------------------
 1 file changed, 30 deletions(-)
 delete mode 100644 arch/arm/mach-w90x900/include/mach/gpio.h

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/include/mach/gpio.h b/arch/arm/mach-w90x900/include/mach/gpio.h
deleted file mode 100644
index 5385a4203277..000000000000
--- a/arch/arm/mach-w90x900/include/mach/gpio.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * linux/arch/arm/mach-w90p910/include/mach/gpio.h
- *
- * Generic w90p910 GPIO handling
- *
- *  Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_W90P910_GPIO_H
-#define __ASM_ARCH_W90P910_GPIO_H
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return gpio;
-}
-#define gpio_to_irq gpio_to_irq
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq;
-}
-
-#endif
-- 
cgit v1.2.3


From 85649711a8959f181b8b646bb985996736af97b8 Mon Sep 17 00:00:00 2001
From: Linus Walleij
Date: Tue, 1 Oct 2013 10:45:42 +0200
Subject: ARM: gemini: delete <mach/gpio.h>

The Gemini has no need of a <mach/gpio.h> header as this is only
used by the machine-local gpio.c gpiochip driver, which is also
only using the irq_to_gpio() macro. Delete the file, move the single
macro into the driver and remove the NEED_MACH_GPIO_H flag.

Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/Kconfig                         |  1 -
 arch/arm/mach-gemini/gpio.c              |  2 +-
 arch/arm/mach-gemini/include/mach/gpio.h | 20 --------------------
 3 files changed, 1 insertion(+), 22 deletions(-)
 delete mode 100644 arch/arm/mach-gemini/include/mach/gpio.h

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c0ed4b2a7ca1..e4061de9999c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -388,7 +388,6 @@ config ARCH_GEMINI
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_USES_GETTIMEOFFSET
 	select CPU_FA526
-	select NEED_MACH_GPIO_H
 	help
 	  Support for the Cortina Systems Gemini family SoCs
 
diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c
index 70bfa571b24b..f8cb5710d6ee 100644
--- a/arch/arm/mach-gemini/gpio.c
+++ b/arch/arm/mach-gemini/gpio.c
@@ -21,9 +21,9 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
 
 #define GPIO_BASE(x)		IO_ADDRESS(GEMINI_GPIO_BASE(x))
+#define irq_to_gpio(x)		((x) - GPIO_IRQ_BASE)
 
 /* GPIO registers definition */
 #define GPIO_DATA_OUT		0x0
diff --git a/arch/arm/mach-gemini/include/mach/gpio.h b/arch/arm/mach-gemini/include/mach/gpio.h
deleted file mode 100644
index 40a0527bada7..000000000000
--- a/arch/arm/mach-gemini/include/mach/gpio.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Gemini gpiolib specific defines
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __MACH_GPIO_H__
-#define __MACH_GPIO_H__
-
-#include <mach/irqs.h>
-
-#define gpio_to_irq(x)	((x) + GPIO_IRQ_BASE)
-#define irq_to_gpio(x)	((x) - GPIO_IRQ_BASE)
-
-#endif /* __MACH_GPIO_H__ */
-- 
cgit v1.2.3


From a17bce4d1dce8f3cf714bc2e5d8e4bac009dc077 Mon Sep 17 00:00:00 2001
From: Borislav Petkov
Date: Mon, 30 Sep 2013 11:56:24 +0200
Subject: x86/boot: Further compress CPUs bootup message

Turn it into (for example):

[    0.073380] x86: Booting SMP configuration:
[    0.074005] .... node   #0, CPUs:          #1   #2   #3   #4   #5   #6   #7
[    0.603005] .... node   #1, CPUs:     #8   #9  #10  #11  #12  #13  #14  #15
[    1.200005] .... node   #2, CPUs:    #16  #17  #18  #19  #20  #21  #22  #23
[    1.796005] .... node   #3, CPUs:    #24  #25  #26  #27  #28  #29  #30  #31
[    2.393005] .... node   #4, CPUs:    #32  #33  #34  #35  #36  #37  #38  #39
[    2.996005] .... node   #5, CPUs:    #40  #41  #42  #43  #44  #45  #46  #47
[    3.600005] .... node   #6, CPUs:    #48  #49  #50  #51  #52  #53  #54  #55
[    4.202005] .... node   #7, CPUs:    #56  #57  #58  #59  #60  #61  #62  #63
[    4.811005] .... node   #8, CPUs:    #64  #65  #66  #67  #68  #69  #70  #71
[    5.421006] .... node   #9, CPUs:    #72  #73  #74  #75  #76  #77  #78  #79
[    6.032005] .... node  #10, CPUs:    #80  #81  #82  #83  #84  #85  #86  #87
[    6.648006] .... node  #11, CPUs:    #88  #89  #90  #91  #92  #93  #94  #95
[    7.262005] .... node  #12, CPUs:    #96  #97  #98  #99 #100 #101 #102 #103
[    7.865005] .... node  #13, CPUs:   #104 #105 #106 #107 #108 #109 #110 #111
[    8.466005] .... node  #14, CPUs:   #112 #113 #114 #115 #116 #117 #118 #119
[    9.073006] .... node  #15, CPUs:   #120 #121 #122 #123 #124 #125 #126 #127
[    9.679901] x86: Booted up 16 nodes, 128 CPUs

and drop useless elements.

Change num_digits() to hpa's division-avoiding, cell-phone-typed
version which he went at great lengths and pains to submit on a
Saturday evening.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: huawei.libin@huawei.com
Cc: wangyijing@huawei.com
Cc: fenghua.yu@intel.com
Cc: guohanjun@huawei.com
Cc: paul.gortmaker@windriver.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20130930095624.GB16383@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/smpboot.c | 24 +++++++++++++++++++-----
 arch/x86/lib/misc.c       | 20 +++++++++++++++-----
 kernel/smp.c              |  7 ++++++-
 3 files changed, 40 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index d41f3ba26ced..2a165580fa16 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -647,22 +647,38 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
 	return (send_status | accept_status);
 }
 
+void smp_announce(void)
+{
+	int num_nodes = num_online_nodes();
+
+	printk(KERN_INFO "x86: Booted up %d node%s, %d CPUs\n",
+	       num_nodes, (num_nodes > 1 ? "s" : ""), num_online_cpus());
+}
+
 /* reduce the number of lines printed when booting a large cpu count system */
 static void announce_cpu(int cpu, int apicid)
 {
 	static int current_node = -1;
 	int node = early_cpu_to_node(cpu);
-	static int width;
+	static int width, node_width;
 
 	if (!width)
 		width = num_digits(num_possible_cpus()) + 1; /* + '#' sign */
 
+	if (!node_width)
+		node_width = num_digits(num_possible_nodes()) + 1; /* + '#' */
+
+	if (cpu == 1)
+		printk(KERN_INFO "x86: Booting SMP configuration:\n");
+
 	if (system_state == SYSTEM_BOOTING) {
 		if (node != current_node) {
 			if (current_node > (-1))
-				pr_cont(" OK\n");
+				pr_cont("\n");
 			current_node = node;
-			pr_info("Booting Node %3d, Processors:", node);
+
+			printk(KERN_INFO ".... node %*s#%d, CPUs:  ",
+			       node_width - num_digits(node), " ", node);
 		}
 
 		/* Add padding for the BSP */
@@ -671,8 +687,6 @@ static void announce_cpu(int cpu, int apicid)
 
 		pr_cont("%*s#%d", width - num_digits(cpu), " ", cpu);
 
-		if (cpu == num_present_cpus() - 1)
-			pr_cont(" OK\n");
 	} else
 		pr_info("Booting Node %d Processor %d APIC 0x%x\n",
 			node, cpu, apicid);
diff --git a/arch/x86/lib/misc.c b/arch/x86/lib/misc.c
index bc35cde9769f..76b373af03f0 100644
--- a/arch/x86/lib/misc.c
+++ b/arch/x86/lib/misc.c
@@ -1,11 +1,21 @@
+/*
+ * Count the digits of @val including a possible sign.
+ *
+ * (Typed on and submitted from hpa's mobile phone.)
+ */
 int num_digits(int val)
 {
-	int digits = 0;
+	int m = 10;
+	int d = 1;
 
-	while (val) {
-		val /= 10;
-		digits++;
+	if (val < 0) {
+		d++;
+		val = -val;
 	}
 
-	return digits;
+	while (val >= m) {
+		m *= 10;
+		d++;
+	}
+	return d;
 }
diff --git a/kernel/smp.c b/kernel/smp.c
index 0564571dcdf7..f5768b0c816a 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -524,6 +524,11 @@ void __init setup_nr_cpu_ids(void)
 	nr_cpu_ids = find_last_bit(cpumask_bits(cpu_possible_mask),NR_CPUS) + 1;
 }
 
+void __weak smp_announce(void)
+{
+	printk(KERN_INFO "Brought up %d CPUs\n", num_online_cpus());
+}
+
 /* Called by boot processor to activate the rest. */
 void __init smp_init(void)
 {
@@ -540,7 +545,7 @@ void __init smp_init(void)
 	}
 
 	/* Any cleanup work */
-	printk(KERN_INFO "Brought up %ld CPUs\n", (long)num_online_cpus());
+	smp_announce();
 	smp_cpus_done(setup_max_cpus);
 }
 
-- 
cgit v1.2.3


From 7d65f4a6553203da6a22097821d151fbbe7e4956 Mon Sep 17 00:00:00 2001
From: Frederic Weisbecker
Date: Thu, 5 Sep 2013 15:49:45 +0200
Subject: irq: Consolidate do_softirq() arch overriden implementations

All arch overriden implementations of do_softirq() share the following
common code: disable irqs (to avoid races with the pending check),
check if there are softirqs pending, then execute __do_softirq() on
a specific stack.

Consolidate the common parts such that archs only worry about the
stack switch.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@au1.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@au1.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 arch/metag/kernel/irq.c    | 52 ++++++++++++++++--------------------------
 arch/parisc/kernel/irq.c   | 17 ++------------
 arch/powerpc/kernel/irq.c  | 17 +-------------
 arch/s390/kernel/irq.c     | 52 +++++++++++++++++-------------------------
 arch/sh/kernel/irq.c       | 57 +++++++++++++++++-----------------------------
 arch/sparc/kernel/irq_64.c | 31 ++++++++-----------------
 arch/x86/kernel/entry_64.S |  4 ++--
 arch/x86/kernel/irq_32.c   | 30 +++++++-----------------
 arch/x86/kernel/irq_64.c   | 21 -----------------
 include/linux/interrupt.h  | 11 +++++++++
 kernel/softirq.c           |  8 +++----
 11 files changed, 98 insertions(+), 202 deletions(-)

(limited to 'arch')

diff --git a/arch/metag/kernel/irq.c b/arch/metag/kernel/irq.c
index 2a2c9d55187e..3b4b7f6c0950 100644
--- a/arch/metag/kernel/irq.c
+++ b/arch/metag/kernel/irq.c
@@ -159,44 +159,30 @@ void irq_ctx_exit(int cpu)
 
 extern asmlinkage void __do_softirq(void);
 
-asmlinkage void do_softirq(void)
+void do_softirq_own_stack(void)
 {
-	unsigned long flags;
 	struct thread_info *curctx;
 	union irq_ctx *irqctx;
 	u32 *isp;
 
-	if (in_interrupt())
-		return;
-
-	local_irq_save(flags);
-
-	if (local_softirq_pending()) {
-		curctx = current_thread_info();
-		irqctx = softirq_ctx[smp_processor_id()];
-		irqctx->tinfo.task = curctx->task;
-
-		/* build the stack frame on the softirq stack */
-		isp = (u32 *) ((char *)irqctx + sizeof(struct thread_info));
-
-		asm volatile (
-			"MOV   D0.5,%0\n"
-			"SWAP  A0StP,D0.5\n"
-			"CALLR D1RtP,___do_softirq\n"
-			"MOV   A0StP,D0.5\n"
-			:
-			: "r" (isp)
-			: "memory", "cc", "D1Ar1", "D0Ar2", "D1Ar3", "D0Ar4",
-			  "D1Ar5", "D0Ar6", "D0Re0", "D1Re0", "D0.4", "D1RtP",
-			  "D0.5"
-			);
-		/*
-		 * Shouldn't happen, we returned above if in_interrupt():
-		 */
-		WARN_ON_ONCE(softirq_count());
-	}
-
-	local_irq_restore(flags);
+	curctx = current_thread_info();
+	irqctx = softirq_ctx[smp_processor_id()];
+	irqctx->tinfo.task = curctx->task;
+
+	/* build the stack frame on the softirq stack */
+	isp = (u32 *) ((char *)irqctx + sizeof(struct thread_info));
+
+	asm volatile (
+		"MOV   D0.5,%0\n"
+		"SWAP  A0StP,D0.5\n"
+		"CALLR D1RtP,___do_softirq\n"
+		"MOV   A0StP,D0.5\n"
+		:
+		: "r" (isp)
+		: "memory", "cc", "D1Ar1", "D0Ar2", "D1Ar3", "D0Ar4",
+		  "D1Ar5", "D0Ar6", "D0Re0", "D1Re0", "D0.4", "D1RtP",
+		  "D0.5"
+		);
 }
 #endif
 
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 2e6443b1e922..ef5927685299 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -499,22 +499,9 @@ static void execute_on_irq_stack(void *func, unsigned long param1)
 	*irq_stack_in_use = 1;
 }
 
-asmlinkage void do_softirq(void)
+void do_softirq_own_stack(void)
 {
-	__u32 pending;
-	unsigned long flags;
-
-	if (in_interrupt())
-		return;
-
-	local_irq_save(flags);
-
-	pending = local_softirq_pending();
-
-	if (pending)
-		execute_on_irq_stack(__do_softirq, 0);
-
-	local_irq_restore(flags);
+	execute_on_irq_stack(__do_softirq, 0);
 }
 #endif /* CONFIG_IRQSTACKS */
 
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 57d286a78f86..5c4adfc6a6d0 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -593,7 +593,7 @@ void irq_ctx_init(void)
 	}
 }
 
-static inline void do_softirq_onstack(void)
+void do_softirq_own_stack(void)
 {
 	struct thread_info *curtp, *irqtp;
 
@@ -611,21 +611,6 @@ static inline void do_softirq_onstack(void)
 		set_bits(irqtp->flags, &curtp->flags);
 }
 
-void do_softirq(void)
-{
-	unsigned long flags;
-
-	if (in_interrupt())
-		return;
-
-	local_irq_save(flags);
-
-	if (local_softirq_pending())
-		do_softirq_onstack();
-
-	local_irq_restore(flags);
-}
-
 irq_hw_number_t virq_to_hw(unsigned int virq)
 {
 	struct irq_data *irq_data = irq_get_irq_data(virq);
diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c
index 8ac2097f13d4..bb27a262c44a 100644
--- a/arch/s390/kernel/irq.c
+++ b/arch/s390/kernel/irq.c
@@ -157,39 +157,29 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 /*
  * Switch to the asynchronous interrupt stack for softirq execution.
  */
-asmlinkage void do_softirq(void)
+void do_softirq_own_stack(void)
 {
-	unsigned long flags, old, new;
-
-	if (in_interrupt())
-		return;
-
-	local_irq_save(flags);
-
-	if (local_softirq_pending()) {
-		/* Get current stack pointer. */
-		asm volatile("la %0,0(15)" : "=a" (old));
-		/* Check against async. stack address range. */
-		new = S390_lowcore.async_stack;
-		if (((new - old) >> (PAGE_SHIFT + THREAD_ORDER)) != 0) {
-			/* Need to switch to the async. stack. */
-			new -= STACK_FRAME_OVERHEAD;
-			((struct stack_frame *) new)->back_chain = old;
-
-			asm volatile("   la    15,0(%0)\n"
-				     "   basr  14,%2\n"
-				     "   la    15,0(%1)\n"
-				     : : "a" (new), "a" (old),
-				         "a" (__do_softirq)
-				     : "0", "1", "2", "3", "4", "5", "14",
-				       "cc", "memory" );
-		} else {
-			/* We are already on the async stack. */
-			__do_softirq();
-		}
+	unsigned long old, new;
+
+	/* Get current stack pointer. */
+	asm volatile("la %0,0(15)" : "=a" (old));
+	/* Check against async. stack address range. */
+	new = S390_lowcore.async_stack;
+	if (((new - old) >> (PAGE_SHIFT + THREAD_ORDER)) != 0) {
+		/* Need to switch to the async. stack. */
+		new -= STACK_FRAME_OVERHEAD;
+		((struct stack_frame *) new)->back_chain = old;
+		asm volatile("   la    15,0(%0)\n"
+			     "   basr  14,%2\n"
+			     "   la    15,0(%1)\n"
+			     : : "a" (new), "a" (old),
+			         "a" (__do_softirq)
+			     : "0", "1", "2", "3", "4", "5", "14",
+			       "cc", "memory" );
+	} else {
+		/* We are already on the async stack. */
+		__do_softirq();
 	}
-
-	local_irq_restore(flags);
 }
 
 /*
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 063af10ff3c1..0833736afa32 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -149,47 +149,32 @@ void irq_ctx_exit(int cpu)
 	hardirq_ctx[cpu] = NULL;
 }
 
-asmlinkage void do_softirq(void)
+void do_softirq_own_stack(void)
 {
-	unsigned long flags;
 	struct thread_info *curctx;
 	union irq_ctx *irqctx;
 	u32 *isp;
 
-	if (in_interrupt())
-		return;
-
-	local_irq_save(flags);
-
-	if (local_softirq_pending()) {
-		curctx = current_thread_info();
-		irqctx = softirq_ctx[smp_processor_id()];
-		irqctx->tinfo.task = curctx->task;
-		irqctx->tinfo.previous_sp = current_stack_pointer;
-
-		/* build the stack frame on the softirq stack */
-		isp = (u32 *)((char *)irqctx + sizeof(*irqctx));
-
-		__asm__ __volatile__ (
-			"mov	r15, r9		\n"
-			"jsr	@%0		\n"
-			/* switch to the softirq stack */
-			" mov	%1, r15		\n"
-			/* restore the thread stack */
-			"mov	r9, r15		\n"
-			: /* no outputs */
-			: "r" (__do_softirq), "r" (isp)
-			: "memory", "r0", "r1", "r2", "r3", "r4",
-			  "r5", "r6", "r7", "r8", "r9", "r15", "t", "pr"
-		);
-
-		/*
-		 * Shouldn't happen, we returned above if in_interrupt():
-		 */
-		WARN_ON_ONCE(softirq_count());
-	}
-
-	local_irq_restore(flags);
+	curctx = current_thread_info();
+	irqctx = softirq_ctx[smp_processor_id()];
+	irqctx->tinfo.task = curctx->task;
+	irqctx->tinfo.previous_sp = current_stack_pointer;
+
+	/* build the stack frame on the softirq stack */
+	isp = (u32 *)((char *)irqctx + sizeof(*irqctx));
+
+	__asm__ __volatile__ (
+		"mov	r15, r9		\n"
+		"jsr	@%0		\n"
+		/* switch to the softirq stack */
+		" mov	%1, r15		\n"
+		/* restore the thread stack */
+		"mov	r9, r15		\n"
+		: /* no outputs */
+		: "r" (__do_softirq), "r" (isp)
+		: "memory", "r0", "r1", "r2", "r3", "r4",
+		  "r5", "r6", "r7", "r8", "r9", "r15", "t", "pr"
+	);
 }
 #else
 static inline void handle_one_irq(unsigned int irq)
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index d4840cec2c55..666193f4e8bb 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -698,30 +698,19 @@ void __irq_entry handler_irq(int pil, struct pt_regs *regs)
 	set_irq_regs(old_regs);
 }
 
-void do_softirq(void)
+void do_softirq_own_stack(void)
 {
-	unsigned long flags;
-
-	if (in_interrupt())
-		return;
-
-	local_irq_save(flags);
+	void *orig_sp, *sp = softirq_stack[smp_processor_id()];
 
-	if (local_softirq_pending()) {
-		void *orig_sp, *sp = softirq_stack[smp_processor_id()];
-
-		sp += THREAD_SIZE - 192 - STACK_BIAS;
-
-		__asm__ __volatile__("mov %%sp, %0\n\t"
-				     "mov %1, %%sp"
-				     : "=&r" (orig_sp)
-				     : "r" (sp));
-		__do_softirq();
-		__asm__ __volatile__("mov %0, %%sp"
-				     : : "r" (orig_sp));
-	}
+	sp += THREAD_SIZE - 192 - STACK_BIAS;
 
-	local_irq_restore(flags);
+	__asm__ __volatile__("mov %%sp, %0\n\t"
+			     "mov %1, %%sp"
+			     : "=&r" (orig_sp)
+			     : "r" (sp));
+	__do_softirq();
+	__asm__ __volatile__("mov %0, %%sp"
+			     : : "r" (orig_sp));
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index b077f4cc225a..083da7c2f40d 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1342,7 +1342,7 @@ bad_gs:
 	.previous
 
 /* Call softirq on interrupt stack. Interrupts are off. */
-ENTRY(call_softirq)
+ENTRY(do_softirq_own_stack)
 	CFI_STARTPROC
 	pushq_cfi %rbp
 	CFI_REL_OFFSET rbp,0
@@ -1359,7 +1359,7 @@ ENTRY(call_softirq)
 	decl PER_CPU_VAR(irq_count)
 	ret
 	CFI_ENDPROC
-END(call_softirq)
+END(do_softirq_own_stack)
 
 #ifdef CONFIG_XEN
 zeroentry xen_hypervisor_callback xen_do_hypervisor_callback
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 4186755f1d7c..8a5bb01dbc0e 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -149,35 +149,21 @@ void irq_ctx_init(int cpu)
 	       cpu, per_cpu(hardirq_ctx, cpu),  per_cpu(softirq_ctx, cpu));
 }
 
-asmlinkage void do_softirq(void)
+void do_softirq_own_stack(void)
 {
-	unsigned long flags;
 	struct thread_info *curctx;
 	union irq_ctx *irqctx;
 	u32 *isp;
 
-	if (in_interrupt())
-		return;
-
-	local_irq_save(flags);
-
-	if (local_softirq_pending()) {
-		curctx = current_thread_info();
-		irqctx = __this_cpu_read(softirq_ctx);
-		irqctx->tinfo.task = curctx->task;
-		irqctx->tinfo.previous_esp = current_stack_pointer;
-
-		/* build the stack frame on the softirq stack */
-		isp = (u32 *) ((char *)irqctx + sizeof(*irqctx));
+	curctx = current_thread_info();
+	irqctx = __this_cpu_read(softirq_ctx);
+	irqctx->tinfo.task = curctx->task;
+	irqctx->tinfo.previous_esp = current_stack_pointer;
 
-		call_on_stack(__do_softirq, isp);
-		/*
-		 * Shouldn't happen, we returned above if in_interrupt():
-		 */
-		WARN_ON_ONCE(softirq_count());
-	}
+	/* build the stack frame on the softirq stack */
+	isp = (u32 *) ((char *)irqctx + sizeof(*irqctx));
 
-	local_irq_restore(flags);
+	call_on_stack(__do_softirq, isp);
 }
 
 bool handle_irq(unsigned irq, struct pt_regs *regs)
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index d04d3ecded62..4d1c746892eb 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -87,24 +87,3 @@ bool handle_irq(unsigned irq, struct pt_regs *regs)
 	generic_handle_irq_desc(irq, desc);
 	return true;
 }
-
-
-extern void call_softirq(void);
-
-asmlinkage void do_softirq(void)
-{
-	__u32 pending;
-	unsigned long flags;
-
-	if (in_interrupt())
-		return;
-
-	local_irq_save(flags);
-	pending = local_softirq_pending();
-	/* Switch to interrupt stack */
-	if (pending) {
-		call_softirq();
-		WARN_ON_ONCE(softirq_count());
-	}
-	local_irq_restore(flags);
-}
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 5e865b554940..c9e831dc80bc 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -19,6 +19,7 @@
 
 #include <linux/atomic.h>
 #include <asm/ptrace.h>
+#include <asm/irq.h>
 
 /*
  * These correspond to the IORESOURCE_IRQ_* defines in
@@ -374,6 +375,16 @@ struct softirq_action
 
 asmlinkage void do_softirq(void);
 asmlinkage void __do_softirq(void);
+
+#ifdef __ARCH_HAS_DO_SOFTIRQ
+void do_softirq_own_stack(void);
+#else
+static inline void do_softirq_own_stack(void)
+{
+	__do_softirq();
+}
+#endif
+
 extern void open_softirq(int nr, void (*action)(struct softirq_action *));
 extern void softirq_init(void);
 extern void __raise_softirq_irqoff(unsigned int nr);
diff --git a/kernel/softirq.c b/kernel/softirq.c
index d7d498d8cc4f..26ee72725d29 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -29,7 +29,6 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/irq.h>
 
-#include <asm/irq.h>
 /*
    - No shared variables, all the data are CPU local.
    - If a softirq needs serialization, let it serialize itself
@@ -283,7 +282,7 @@ restart:
 	tsk_restore_flags(current, old_flags, PF_MEMALLOC);
 }
 
-#ifndef __ARCH_HAS_DO_SOFTIRQ
+
 
 asmlinkage void do_softirq(void)
 {
@@ -298,13 +297,12 @@ asmlinkage void do_softirq(void)
 	pending = local_softirq_pending();
 
 	if (pending)
-		__do_softirq();
+		do_softirq_own_stack();
 
+	WARN_ON_ONCE(softirq_count());
 	local_irq_restore(flags);
 }
 
-#endif
-
 /*
  * Enter an interrupt context.
  */
-- 
cgit v1.2.3


From cc1f027454929924471bea2f362431072e3c71be Mon Sep 17 00:00:00 2001
From: Frederic Weisbecker
Date: Tue, 24 Sep 2013 17:17:47 +0200
Subject: irq: Optimize softirq stack selection in irq exit

If irq_exit() is called on the arch's specified irq stack,
it should be safe to run softirqs inline under that same
irq stack as it is near empty by the time we call irq_exit().

For example if we use the same stack for both hard and soft irqs here,
the worst case scenario is:
hardirq -> softirq -> hardirq. But then the softirq supersedes the
first hardirq as the stack user since irq_exit() is called in
a mostly empty stack. So the stack merge in this case looks acceptable.

Stack overrun still have a chance to happen if hardirqs have more
opportunities to nest, but then it's another problem to solve.

So lets adapt the irq exit's softirq stack on top of a new Kconfig symbol
that can be defined when irq_exit() runs on the irq stack. That way
we can spare some stack switch on irq processing and all the cache
issues that come along.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@au1.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@au1.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 arch/Kconfig     | 10 ++++++++++
 kernel/softirq.c | 14 ++++++++++----
 2 files changed, 20 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/Kconfig b/arch/Kconfig
index af2cc6eabcc7..ad95133f8fae 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -390,6 +390,16 @@ config HAVE_UNDERSCORE_SYMBOL_PREFIX
 	  Some architectures generate an _ in front of C symbols; things like
 	  module loading and assembly files need to know about this.
 
+config HAVE_IRQ_EXIT_ON_IRQ_STACK
+	bool
+	help
+	  Architecture doesn't only execute the irq handler on the irq stack
+	  but also irq_exit(). This way we can process softirqs on this irq
+	  stack instead of switching to a new one when we call __do_softirq()
+	  in the end of an hardirq.
+	  This spares a stack switch and improves cache usage on softirq
+	  processing.
+
 #
 # ABI hall of shame
 #
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 2b4328ea769f..dacd0ab51df4 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -332,15 +332,21 @@ void irq_enter(void)
 static inline void invoke_softirq(void)
 {
 	if (!force_irqthreads) {
+#ifdef CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK
 		/*
 		 * We can safely execute softirq on the current stack if
 		 * it is the irq stack, because it should be near empty
-		 * at this stage. But we have no way to know if the arch
-		 * calls irq_exit() on the irq stack. So call softirq
-		 * in its own stack to prevent from any overrun on top
-		 * of a potentially deep task stack.
+		 * at this stage.
+		 */
+		__do_softirq();
+#else
+		/*
+		 * Otherwise, irq_exit() is called on the task stack that can
+		 * be potentially deep already. So call softirq in its own stack
+		 * to prevent from any overrun.
 		 */
 		do_softirq_own_stack();
+#endif
 	} else {
 		wakeup_softirqd();
 	}
-- 
cgit v1.2.3


From a2cd11f7d58a3a5390ee4cbcd8cff634a4d59173 Mon Sep 17 00:00:00 2001
From: Frederic Weisbecker
Date: Tue, 24 Sep 2013 17:18:36 +0200
Subject: x86: Tell about irq stack coverage

x86-64 runs irq_exit() under the irq stack. So it can afford
to run softirqs in hardirq exit without the need to switch
the stacks. The hardirq stack is good enough for that.

Now x86-64 runs softirqs in the hardirq stack anyway, so what we
mostly skip is some needless per cpu refcounting updates there.

x86-32 is not concerned because it only runs the irq handler on
the irq stack.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@au1.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@au1.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 arch/x86/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index ee2fb9d37745..99eb1cc30dac 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -123,6 +123,7 @@ config X86
 	select COMPAT_OLD_SIGACTION if IA32_EMULATION
 	select RTC_LIB
 	select HAVE_DEBUG_STACKOVERFLOW
+	select HAVE_IRQ_EXIT_ON_IRQ_STACK if X86_64
 
 config INSTRUCTION_DECODER
 	def_bool y
-- 
cgit v1.2.3


From 62d26c8200a8382e1c67419ca3aff78d37898cc5 Mon Sep 17 00:00:00 2001
From: Frederic Weisbecker
Date: Tue, 24 Sep 2013 17:18:36 +0200
Subject: powerpc: Tell about irq stack coverage

Now that powerpc runs irq_exit() under the irq stack,
let the softirq core know about that so that we spare
the needless stack switch on irq exit's softirq processing.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@au1.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@au1.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 arch/powerpc/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 38f3b7e47ec5..b365d5cbb722 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -138,6 +138,7 @@ config PPC
 	select OLD_SIGSUSPEND
 	select OLD_SIGACTION if PPC32
 	select HAVE_DEBUG_STACKOVERFLOW
+	select HAVE_IRQ_EXIT_ON_IRQ_STACK
 
 config EARLY_PRINTK
 	bool
-- 
cgit v1.2.3


From a6d30e0fffb32ab9e48fa7fc8f463805d5b0bddb Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz
Date: Mon, 30 Sep 2013 15:21:15 +0200
Subject: x86/geode: Fix incorrect placement of __initdata tag

__initdata tag should be placed between the variable name and
equal sign for the variable to be placed in the intended
.init.data section.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Link: http://lkml.kernel.org/r/18427893.G5JGWn465D@amdc1032
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/platform/geode/alix.c    | 2 +-
 arch/x86/platform/geode/geos.c    | 2 +-
 arch/x86/platform/geode/net5501.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/platform/geode/alix.c b/arch/x86/platform/geode/alix.c
index 90e23e7679a5..76b6632d3143 100644
--- a/arch/x86/platform/geode/alix.c
+++ b/arch/x86/platform/geode/alix.c
@@ -98,7 +98,7 @@ static struct platform_device alix_leds_dev = {
 	.dev.platform_data = &alix_leds_data,
 };
 
-static struct __initdata platform_device *alix_devs[] = {
+static struct platform_device *alix_devs[] __initdata = {
 	&alix_buttons_dev,
 	&alix_leds_dev,
 };
diff --git a/arch/x86/platform/geode/geos.c b/arch/x86/platform/geode/geos.c
index c2e6d53558be..aa733fba2471 100644
--- a/arch/x86/platform/geode/geos.c
+++ b/arch/x86/platform/geode/geos.c
@@ -87,7 +87,7 @@ static struct platform_device geos_leds_dev = {
 	.dev.platform_data = &geos_leds_data,
 };
 
-static struct __initdata platform_device *geos_devs[] = {
+static struct platform_device *geos_devs[] __initdata = {
 	&geos_buttons_dev,
 	&geos_leds_dev,
 };
diff --git a/arch/x86/platform/geode/net5501.c b/arch/x86/platform/geode/net5501.c
index 646e3b5b4bb6..927e38c0089f 100644
--- a/arch/x86/platform/geode/net5501.c
+++ b/arch/x86/platform/geode/net5501.c
@@ -78,7 +78,7 @@ static struct platform_device net5501_leds_dev = {
 	.dev.platform_data = &net5501_leds_data,
 };
 
-static struct __initdata platform_device *net5501_devs[] = {
+static struct platform_device *net5501_devs[] __initdata = {
 	&net5501_buttons_dev,
 	&net5501_leds_dev,
 };
-- 
cgit v1.2.3


From e56e57f6613d5ed5c3127419341d1aa989a11971 Mon Sep 17 00:00:00 2001
From: Dave Jones
Date: Tue, 1 Oct 2013 16:36:55 -0400
Subject: x86/reboot: Sort reboot DMI quirks by vendor

Grouping them by vendor should make it easier to spot duplicates.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Link: http://lkml.kernel.org/r/20131001203655.GA10719@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/reboot.c | 260 +++++++++++++++++++++++++----------------------
 1 file changed, 136 insertions(+), 124 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index d9333a404685..76925208f50b 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -136,236 +136,248 @@ static int __init set_kbd_reboot(const struct dmi_system_id *d)
  * This is a single dmi_table handling all reboot quirks.
  */
 static struct dmi_system_id __initdata reboot_dmi_table[] = {
-	{	/* Handle problems with rebooting on Dell E520's */
-		.callback = set_bios_reboot,
-		.ident = "Dell E520",
+
+	/* Acer */
+	{	/* Handle reboot issue on Acer Aspire one */
+		.callback = set_kbd_reboot,
+		.ident = "Acer Aspire One A110",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM061"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AOA110"),
 		},
 	},
-	{	/* Handle problems with rebooting on Dell 1300's */
-		.callback = set_bios_reboot,
-		.ident = "Dell PowerEdge 1300",
+
+	/* Apple */
+	{	/* Handle problems with rebooting on Apple MacBook5 */
+		.callback = set_pci_reboot,
+		.ident = "Apple MacBook5",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1300/"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5"),
 		},
 	},
-	{	/* Handle problems with rebooting on Dell 300's */
-		.callback = set_bios_reboot,
-		.ident = "Dell PowerEdge 300",
+	{	/* Handle problems with rebooting on Apple MacBookPro5 */
+		.callback = set_pci_reboot,
+		.ident = "Apple MacBookPro5",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 300/"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5"),
 		},
 	},
-	{	/* Handle problems with rebooting on Dell Optiplex 745's SFF */
-		.callback = set_bios_reboot,
-		.ident = "Dell OptiPlex 745",
+	{	/* Handle problems with rebooting on Apple Macmini3,1 */
+		.callback = set_pci_reboot,
+		.ident = "Apple Macmini3,1",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini3,1"),
 		},
 	},
-	{	/* Handle problems with rebooting on Dell Optiplex 745's DFF */
-		.callback = set_bios_reboot,
-		.ident = "Dell OptiPlex 745",
+	{	/* Handle problems with rebooting on the iMac9,1. */
+		.callback = set_pci_reboot,
+		.ident = "Apple iMac9,1",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"),
-			DMI_MATCH(DMI_BOARD_NAME, "0MM599"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1"),
 		},
 	},
-	{	/* Handle problems with rebooting on Dell Optiplex 745 with 0KW626 */
+
+	/* ASUS */
+	{	/* Handle problems with rebooting on ASUS P4S800 */
 		.callback = set_bios_reboot,
-		.ident = "Dell OptiPlex 745",
+		.ident = "ASUS P4S800",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"),
-			DMI_MATCH(DMI_BOARD_NAME, "0KW626"),
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "P4S800"),
 		},
 	},
-	{	/* Handle problems with rebooting on Dell Optiplex 330 with 0KP561 */
+
+	/* Dell */
+	{	/* Handle problems with rebooting on Dell DXP061 */
 		.callback = set_bios_reboot,
-		.ident = "Dell OptiPlex 330",
+		.ident = "Dell DXP061",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 330"),
-			DMI_MATCH(DMI_BOARD_NAME, "0KP561"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Dell DXP061"),
 		},
 	},
-	{	/* Handle problems with rebooting on Dell Optiplex 360 with 0T656F */
+	{	/* Handle problems with rebooting on Dell E520's */
 		.callback = set_bios_reboot,
-		.ident = "Dell OptiPlex 360",
+		.ident = "Dell E520",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 360"),
-			DMI_MATCH(DMI_BOARD_NAME, "0T656F"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM061"),
 		},
 	},
-	{	/* Handle problems with rebooting on Dell OptiPlex 760 with 0G919G */
-		.callback = set_bios_reboot,
-		.ident = "Dell OptiPlex 760",
+	{	/* Handle problems with rebooting on the Latitude E5420. */
+		.callback = set_pci_reboot,
+		.ident = "Dell Latitude E5420",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 760"),
-			DMI_MATCH(DMI_BOARD_NAME, "0G919G"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E5420"),
 		},
 	},
-	{	/* Handle problems with rebooting on Dell 2400's */
-		.callback = set_bios_reboot,
-		.ident = "Dell PowerEdge 2400",
+	{	/* Handle problems with rebooting on the Latitude E6320. */
+		.callback = set_pci_reboot,
+		.ident = "Dell Latitude E6320",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6320"),
 		},
 	},
-	{	/* Handle problems with rebooting on Dell T5400's */
-		.callback = set_bios_reboot,
-		.ident = "Dell Precision T5400",
+	{	/* Handle problems with rebooting on the Latitude E6420. */
+		.callback = set_pci_reboot,
+		.ident = "Dell Latitude E6420",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T5400"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6420"),
 		},
 	},
-	{	/* Handle problems with rebooting on Dell T7400's */
+	{	/* Handle problems with rebooting on Dell Optiplex 330 with 0KP561 */
 		.callback = set_bios_reboot,
-		.ident = "Dell Precision T7400",
+		.ident = "Dell OptiPlex 330",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T7400"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 330"),
+			DMI_MATCH(DMI_BOARD_NAME, "0KP561"),
 		},
 	},
-	{	/* Handle problems with rebooting on HP laptops */
+	{	/* Handle problems with rebooting on Dell Optiplex 360 with 0T656F */
 		.callback = set_bios_reboot,
-		.ident = "HP Compaq Laptop",
+		.ident = "Dell OptiPlex 360",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 360"),
+			DMI_MATCH(DMI_BOARD_NAME, "0T656F"),
 		},
 	},
-	{	/* Handle problems with rebooting on Dell XPS710 */
+	{	/* Handle problems with rebooting on Dell Optiplex 745's SFF */
 		.callback = set_bios_reboot,
-		.ident = "Dell XPS710",
+		.ident = "Dell OptiPlex 745",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"),
 		},
 	},
-	{	/* Handle problems with rebooting on Dell DXP061 */
+	{	/* Handle problems with rebooting on Dell Optiplex 745's DFF */
 		.callback = set_bios_reboot,
-		.ident = "Dell DXP061",
+		.ident = "Dell OptiPlex 745",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Dell DXP061"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"),
+			DMI_MATCH(DMI_BOARD_NAME, "0MM599"),
 		},
 	},
-	{	/* Handle problems with rebooting on Sony VGN-Z540N */
+	{	/* Handle problems with rebooting on Dell Optiplex 745 with 0KW626 */
 		.callback = set_bios_reboot,
-		.ident = "Sony VGN-Z540N",
+		.ident = "Dell OptiPlex 745",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"),
+			DMI_MATCH(DMI_BOARD_NAME, "0KW626"),
 		},
 	},
-	{	/* Handle problems with rebooting on ASUS P4S800 */
+	{	/* Handle problems with rebooting on Dell OptiPlex 760 with 0G919G */
 		.callback = set_bios_reboot,
-		.ident = "ASUS P4S800",
+		.ident = "Dell OptiPlex 760",
 		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-			DMI_MATCH(DMI_BOARD_NAME, "P4S800"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 760"),
+			DMI_MATCH(DMI_BOARD_NAME, "0G919G"),
 		},
 	},
-
-	{	/* Handle reboot issue on Acer Aspire one */
-		.callback = set_kbd_reboot,
-		.ident = "Acer Aspire One A110",
+	{	/* Handle problems with rebooting on the OptiPlex 990. */
+		.callback = set_pci_reboot,
+		.ident = "Dell OptiPlex 990",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "AOA110"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"),
 		},
 	},
-	{	/* Handle problems with rebooting on Apple MacBook5 */
-		.callback = set_pci_reboot,
-		.ident = "Apple MacBook5",
+	{	/* Handle problems with rebooting on Dell 300's */
+		.callback = set_bios_reboot,
+		.ident = "Dell PowerEdge 300",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 300/"),
 		},
 	},
-	{	/* Handle problems with rebooting on Apple MacBookPro5 */
-		.callback = set_pci_reboot,
-		.ident = "Apple MacBookPro5",
+	{	/* Handle problems with rebooting on Dell 1300's */
+		.callback = set_bios_reboot,
+		.ident = "Dell PowerEdge 1300",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1300/"),
 		},
 	},
-	{	/* Handle problems with rebooting on Apple Macmini3,1 */
-		.callback = set_pci_reboot,
-		.ident = "Apple Macmini3,1",
+	{	/* Handle problems with rebooting on Dell 2400's */
+		.callback = set_bios_reboot,
+		.ident = "Dell PowerEdge 2400",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini3,1"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"),
 		},
 	},
-	{	/* Handle problems with rebooting on the iMac9,1. */
+	{	/* Handle problems with rebooting on the Dell PowerEdge C6100. */
 		.callback = set_pci_reboot,
-		.ident = "Apple iMac9,1",
+		.ident = "Dell PowerEdge C6100",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "C6100"),
 		},
 	},
-	{	/* Handle problems with rebooting on the Latitude E6320. */
+	{	/* Handle problems with rebooting on the Precision M6600. */
 		.callback = set_pci_reboot,
-		.ident = "Dell Latitude E6320",
+		.ident = "Dell Precision M6600",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6320"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Precision M6600"),
 		},
 	},
-	{	/* Handle problems with rebooting on the Latitude E5420. */
-		.callback = set_pci_reboot,
-		.ident = "Dell Latitude E5420",
+	{	/* Handle problems with rebooting on Dell T5400's */
+		.callback = set_bios_reboot,
+		.ident = "Dell Precision T5400",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E5420"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T5400"),
 		},
 	},
-	{	/* Handle problems with rebooting on the Latitude E6420. */
-		.callback = set_pci_reboot,
-		.ident = "Dell Latitude E6420",
+	{	/* Handle problems with rebooting on Dell T7400's */
+		.callback = set_bios_reboot,
+		.ident = "Dell Precision T7400",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6420"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T7400"),
 		},
 	},
-	{	/* Handle problems with rebooting on the OptiPlex 990. */
-		.callback = set_pci_reboot,
-		.ident = "Dell OptiPlex 990",
+	{	/* Handle problems with rebooting on Dell XPS710 */
+		.callback = set_bios_reboot,
+		.ident = "Dell XPS710",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"),
 		},
 	},
-	{	/* Handle problems with rebooting on the Precision M6600. */
-		.callback = set_pci_reboot,
-		.ident = "Dell Precision M6600",
+
+	/* Hewlett-Packard */
+	{	/* Handle problems with rebooting on HP laptops */
+		.callback = set_bios_reboot,
+		.ident = "HP Compaq Laptop",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Precision M6600"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"),
 		},
 	},
-	{	/* Handle problems with rebooting on the Dell PowerEdge C6100. */
-		.callback = set_pci_reboot,
-		.ident = "Dell PowerEdge C6100",
+
+	/* Sony */
+	{	/* Handle problems with rebooting on Sony VGN-Z540N */
+		.callback = set_bios_reboot,
+		.ident = "Sony VGN-Z540N",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "C6100"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"),
 		},
 	},
+
 	{ }
 };
 
-- 
cgit v1.2.3


From fa94bd57b5a5b2206e5fdd0ed2dbacff199121f2 Mon Sep 17 00:00:00 2001
From: Soren Brinkmann
Date: Wed, 18 Sep 2013 11:48:38 -0700
Subject: arm: zynq: Enable arm_global_timer

Zynq is based on an ARM Cortex-A9 MPCore, which features the
arm_global_timer in its SCU. Therefore enable the timer for Zynq.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/arm/boot/dts/zynq-7000.dtsi | 8 ++++++++
 arch/arm/mach-zynq/Kconfig       | 1 +
 2 files changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index e32b92b949d2..e7f73b2e4550 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -92,6 +92,14 @@
 			};
 		};
 
+		global_timer: timer@f8f00200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0xf8f00200 0x20>;
+			interrupts = <1 11 0x301>;
+			interrupt-parent = <&intc>;
+			clocks = <&clkc 4>;
+		};
+
 		ttc0: ttc0@f8001000 {
 			interrupt-parent = <&intc>;
 			interrupts = < 0 10 4 0 11 4 0 12 4 >;
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 04f8a4a6e755..6b04260aa142 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -13,5 +13,6 @@ config ARCH_ZYNQ
 	select HAVE_SMP
 	select SPARSE_IRQ
 	select CADENCE_TTC_TIMER
+	select ARM_GLOBAL_TIMER
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform
-- 
cgit v1.2.3


From 326e31eebe61dc838e031ea16968b2cfb43443e3 Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König
Date: Tue, 1 Oct 2013 11:00:53 +0200
Subject: clocksource: Put nodes passed to CLOCKSOURCE_OF_DECLARE callbacks
 centrally

Instead of letting each driver call of_node_put do it centrally in the
loop that also calls the CLOCKSOURCE_OF_DECLARE callbacks. This is less
prone to error and also moves getting and putting the references into the
same function.

Consequently all respective of_node_put calls in drivers are removed.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: David Brown <davidb@codeaurora.org>
---
 arch/arm/mach-msm/timer.c             | 1 -
 drivers/clocksource/clksrc-of.c       | 1 +
 drivers/clocksource/dw_apb_timer_of.c | 2 --
 drivers/clocksource/tegra20_timer.c   | 4 ----
 drivers/clocksource/vt8500_timer.c    | 2 --
 5 files changed, 1 insertion(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 696fb73296d0..1e9c3383daba 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -274,7 +274,6 @@ static void __init msm_dt_timer_init(struct device_node *np)
 		pr_err("Unknown frequency\n");
 		return;
 	}
-	of_node_put(np);
 
 	event_base = base + 0x4;
 	sts_base = base + 0x88;
diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c
index 37f5325bec95..8b2ed14f121d 100644
--- a/drivers/clocksource/clksrc-of.c
+++ b/drivers/clocksource/clksrc-of.c
@@ -32,5 +32,6 @@ void __init clocksource_of_init(void)
 	for_each_matching_node_and_match(np, __clksrc_of_table, &match) {
 		init_func = match->data;
 		init_func(np);
+		of_node_put(np);
 	}
 }
diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index 003b2309f463..482618b59fa4 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -138,12 +138,10 @@ static void __init dw_apb_timer_init(struct device_node *timer)
 	case 0:
 		pr_debug("%s: found clockevent timer\n", __func__);
 		add_clockevent(timer);
-		of_node_put(timer);
 		break;
 	case 1:
 		pr_debug("%s: found clocksource timer\n", __func__);
 		add_clocksource(timer);
-		of_node_put(timer);
 		init_sched_clock();
 		break;
 	default:
diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c
index 5cff61677b6c..642849256d82 100644
--- a/drivers/clocksource/tegra20_timer.c
+++ b/drivers/clocksource/tegra20_timer.c
@@ -181,8 +181,6 @@ static void __init tegra20_init_timer(struct device_node *np)
 		rate = clk_get_rate(clk);
 	}
 
-	of_node_put(np);
-
 	switch (rate) {
 	case 12000000:
 		timer_writel(0x000b, TIMERUS_USEC_CFG);
@@ -241,8 +239,6 @@ static void __init tegra20_init_rtc(struct device_node *np)
 	else
 		clk_prepare_enable(clk);
 
-	of_node_put(np);
-
 	register_persistent_clock(NULL, tegra_read_persistent_clock);
 }
 CLOCKSOURCE_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);
diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c
index 64f553f04fa4..ad3c0e83a779 100644
--- a/drivers/clocksource/vt8500_timer.c
+++ b/drivers/clocksource/vt8500_timer.c
@@ -137,14 +137,12 @@ static void __init vt8500_timer_init(struct device_node *np)
 	if (!regbase) {
 		pr_err("%s: Missing iobase description in Device Tree\n",
 								__func__);
-		of_node_put(np);
 		return;
 	}
 	timer_irq = irq_of_parse_and_map(np, 0);
 	if (!timer_irq) {
 		pr_err("%s: Missing irq description in Device Tree\n",
 								__func__);
-		of_node_put(np);
 		return;
 	}
 
-- 
cgit v1.2.3


From e379ea82dd53a5cc8e3ac0b7899a8012006c712c Mon Sep 17 00:00:00 2001
From: Mike Travis
Date: Wed, 2 Oct 2013 10:14:19 -0500
Subject: x86/UV: Add call to KGDB/KDB from NMI handler

This patch restores the capability to enter KDB (and KGDB) from
the UV NMI handler.  This is needed because the UV system
console is not capable of sending the 'break' signal to the
serial console port.  It is also useful when the kernel is hung
in such a way that it isn't responding to normal external I/O,
so sending 'g' to sysreq-trigger does not work either.

Another benefit of the external NMI command is that all the cpus
receive the NMI signal at roughly the same time so they are more
closely aligned timewise.

It utilizes the newly added kgdb_nmicallin function to gain
entry to KGDB/KDB by the master.  The slaves still enter via the
standard kgdb_nmicallback function.  It also uses the new
'send_ready' pointer to tell KGDB/KDB to signal the slaves when
to proceed into the KGDB slave loop.

It is enabled when the nmi action is set to "kdb" and the kernel
is built with CONFIG_KDB enabled.  Note that if kgdb is
connected that interface will be used instead.

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Reviewed-by: Hedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20131002151418.089692683@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/platform/uv/uv_nmi.c | 47 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/platform/uv/uv_nmi.c b/arch/x86/platform/uv/uv_nmi.c
index 9126dfb6dbfc..9b8ac60ad8db 100644
--- a/arch/x86/platform/uv/uv_nmi.c
+++ b/arch/x86/platform/uv/uv_nmi.c
@@ -21,7 +21,9 @@
 
 #include <linux/cpu.h>
 #include <linux/delay.h>
+#include <linux/kdb.h>
 #include <linux/kexec.h>
+#include <linux/kgdb.h>
 #include <linux/module.h>
 #include <linux/nmi.h>
 #include <linux/sched.h>
@@ -32,6 +34,7 @@
 #include <asm/kdebug.h>
 #include <asm/local64.h>
 #include <asm/nmi.h>
+#include <asm/traps.h>
 #include <asm/uv/uv.h>
 #include <asm/uv/uv_hub.h>
 #include <asm/uv/uv_mmrs.h>
@@ -153,8 +156,9 @@ module_param_named(retry_count, uv_nmi_retry_count, int, 0644);
  *  "dump"	- dump process stack for each cpu
  *  "ips"	- dump IP info for each cpu
  *  "kdump"	- do crash dump
+ *  "kdb"	- enter KDB/KGDB (default)
  */
-static char uv_nmi_action[8] = "dump";
+static char uv_nmi_action[8] = "kdb";
 module_param_string(action, uv_nmi_action, sizeof(uv_nmi_action), 0644);
 
 static inline bool uv_nmi_action_is(const char *action)
@@ -540,6 +544,43 @@ static inline void uv_nmi_kdump(int cpu, int master, struct pt_regs *regs)
 }
 #endif /* !CONFIG_KEXEC */
 
+#ifdef CONFIG_KGDB_KDB
+/* Call KDB from NMI handler */
+static void uv_call_kdb(int cpu, struct pt_regs *regs, int master)
+{
+	int ret;
+
+	if (master) {
+		/* call KGDB NMI handler as MASTER */
+		ret = kgdb_nmicallin(cpu, X86_TRAP_NMI, regs,
+					&uv_nmi_slave_continue);
+		if (ret) {
+			pr_alert("KDB returned error, is kgdboc set?\n");
+			atomic_set(&uv_nmi_slave_continue, SLAVE_EXIT);
+		}
+	} else {
+		/* wait for KGDB signal that it's ready for slaves to enter */
+		int sig;
+
+		do {
+			cpu_relax();
+			sig = atomic_read(&uv_nmi_slave_continue);
+		} while (!sig);
+
+		/* call KGDB as slave */
+		if (sig == SLAVE_CONTINUE)
+			kgdb_nmicallback(cpu, regs);
+	}
+	uv_nmi_sync_exit(master);
+}
+
+#else /* !CONFIG_KGDB_KDB */
+static inline void uv_call_kdb(int cpu, struct pt_regs *regs, int master)
+{
+	pr_err("UV: NMI error: KGDB/KDB is not enabled in this kernel\n");
+}
+#endif /* !CONFIG_KGDB_KDB */
+
 /*
  * UV NMI handler
  */
@@ -576,6 +617,10 @@ int uv_handle_nmi(unsigned int reason, struct pt_regs *regs)
 	if (uv_nmi_action_is("ips") || uv_nmi_action_is("dump"))
 		uv_nmi_dump_state(cpu, regs, master);
 
+	/* Call KDB if enabled */
+	else if (uv_nmi_action_is("kdb"))
+		uv_call_kdb(cpu, regs, master);
+
 	/* Clear per_cpu "in nmi" flag */
 	atomic_set(&uv_cpu_nmi.state, UV_NMI_STATE_OUT);
 
-- 
cgit v1.2.3


From a405bad5ad2086766ce320b16a56952e013327f8 Mon Sep 17 00:00:00 2001
From: Andi Kleen
Date: Fri, 20 Sep 2013 07:40:40 -0700
Subject: perf/x86: Add Haswell specific transaction flag reporting

In the PEBS handler report the transaction flags using the new
generic transaction flags facility. Most of them come from
the "tsx_tuning" field in PEBSv2, but the abort code is derived
from the RAX register reported in the PEBS record.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1379688044-14173-3-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/cpu/perf_event_intel_ds.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index 07d9a052ee72..32e9ed81cd00 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -206,6 +206,8 @@ union hsw_tsx_tuning {
 	u64	    value;
 };
 
+#define PEBS_HSW_TSX_FLAGS	0xff00000000ULL
+
 void init_debug_store_on_cpu(int cpu)
 {
 	struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds;
@@ -807,6 +809,16 @@ static inline u64 intel_hsw_weight(struct pebs_record_hsw *pebs)
 	return 0;
 }
 
+static inline u64 intel_hsw_transaction(struct pebs_record_hsw *pebs)
+{
+	u64 txn = (pebs->tsx_tuning & PEBS_HSW_TSX_FLAGS) >> 32;
+
+	/* For RTM XABORTs also log the abort code from AX */
+	if ((txn & PERF_TXN_TRANSACTION) && (pebs->ax & 1))
+		txn |= ((pebs->ax >> 24) & 0xff) << PERF_TXN_ABORT_SHIFT;
+	return txn;
+}
+
 static void __intel_pmu_pebs_event(struct perf_event *event,
 				   struct pt_regs *iregs, void *__pebs)
 {
@@ -885,10 +897,14 @@ static void __intel_pmu_pebs_event(struct perf_event *event,
 	    x86_pmu.intel_cap.pebs_format >= 1)
 		data.addr = pebs->dla;
 
-	/* Only set the TSX weight when no memory weight was requested. */
-	if ((event->attr.sample_type & PERF_SAMPLE_WEIGHT) && !fll &&
-	    (x86_pmu.intel_cap.pebs_format >= 2))
-		data.weight = intel_hsw_weight(pebs);
+	if (x86_pmu.intel_cap.pebs_format >= 2) {
+		/* Only set the TSX weight when no memory weight. */
+		if ((event->attr.sample_type & PERF_SAMPLE_WEIGHT) && !fll)
+			data.weight = intel_hsw_weight(pebs);
+
+		if (event->attr.sample_type & PERF_SAMPLE_TRANSACTION)
+			data.txn = intel_hsw_transaction(pebs);
+	}
 
 	if (has_branch_stack(event))
 		data.br_stack = &cpuc->lbr_stack;
-- 
cgit v1.2.3


From b7af41a1bc255c0098c37a4bcf5c7e5e168ce875 Mon Sep 17 00:00:00 2001
From: Andi Kleen
Date: Fri, 20 Sep 2013 07:40:44 -0700
Subject: perf/x86: Suppress duplicated abort LBR records

Haswell always give an extra LBR record after every TSX abort.
Suppress the extra record.

This only works when the abort is visible in the LBR
If the original abort has already left the 16 LBR entries
the extra entry will will stay.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1379688044-14173-7-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/cpu/perf_event.h           |  1 +
 arch/x86/kernel/cpu/perf_event_intel.c     |  1 +
 arch/x86/kernel/cpu/perf_event_intel_lbr.c | 29 +++++++++++++++++++++--------
 3 files changed, 23 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h
index ce84edeeae27..fd00bb29425d 100644
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/kernel/cpu/perf_event.h
@@ -445,6 +445,7 @@ struct x86_pmu {
 	int		lbr_nr;			   /* hardware stack size */
 	u64		lbr_sel_mask;		   /* LBR_SELECT valid bits */
 	const int	*lbr_sel_map;		   /* lbr_select mappings */
+	bool		lbr_double_abort;	   /* duplicated lbr aborts */
 
 	/*
 	 * Extra registers for events
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 36b5ab884c15..0fa4f242f050 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -2519,6 +2519,7 @@ __init int intel_pmu_init(void)
 		x86_pmu.hw_config = hsw_hw_config;
 		x86_pmu.get_event_constraints = hsw_get_event_constraints;
 		x86_pmu.cpu_events = hsw_events_attrs;
+		x86_pmu.lbr_double_abort = true;
 		pr_cont("Haswell events, ");
 		break;
 
diff --git a/arch/x86/kernel/cpu/perf_event_intel_lbr.c b/arch/x86/kernel/cpu/perf_event_intel_lbr.c
index d5be06a5005e..90ee6c1d0542 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_lbr.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_lbr.c
@@ -284,6 +284,7 @@ static void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc)
 	int lbr_format = x86_pmu.intel_cap.lbr_format;
 	u64 tos = intel_pmu_lbr_tos();
 	int i;
+	int out = 0;
 
 	for (i = 0; i < x86_pmu.lbr_nr; i++) {
 		unsigned long lbr_idx = (tos - i) & mask;
@@ -306,15 +307,27 @@ static void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc)
 		}
 		from = (u64)((((s64)from) << skip) >> skip);
 
-		cpuc->lbr_entries[i].from	= from;
-		cpuc->lbr_entries[i].to		= to;
-		cpuc->lbr_entries[i].mispred	= mis;
-		cpuc->lbr_entries[i].predicted	= pred;
-		cpuc->lbr_entries[i].in_tx	= in_tx;
-		cpuc->lbr_entries[i].abort	= abort;
-		cpuc->lbr_entries[i].reserved	= 0;
+		/*
+		 * Some CPUs report duplicated abort records,
+		 * with the second entry not having an abort bit set.
+		 * Skip them here. This loop runs backwards,
+		 * so we need to undo the previous record.
+		 * If the abort just happened outside the window
+		 * the extra entry cannot be removed.
+		 */
+		if (abort && x86_pmu.lbr_double_abort && out > 0)
+			out--;
+
+		cpuc->lbr_entries[out].from	 = from;
+		cpuc->lbr_entries[out].to	 = to;
+		cpuc->lbr_entries[out].mispred	 = mis;
+		cpuc->lbr_entries[out].predicted = pred;
+		cpuc->lbr_entries[out].in_tx	 = in_tx;
+		cpuc->lbr_entries[out].abort	 = abort;
+		cpuc->lbr_entries[out].reserved	 = 0;
+		out++;
 	}
-	cpuc->lbr_stack.nr = i;
+	cpuc->lbr_stack.nr = out;
 }
 
 void intel_pmu_lbr_read(void)
-- 
cgit v1.2.3


From 35a2af94c7ce7130ca292c68b1d27fcfdb648f6b Mon Sep 17 00:00:00 2001
From: Peter Zijlstra
Date: Wed, 2 Oct 2013 11:22:33 +0200
Subject: sched/wait: Make the __wait_event*() interface more friendly

Change all __wait_event*() implementations to match the corresponding
wait_event*() signature for convenience.

In particular this does away with the weird 'ret' logic. Since there
are __wait_event*() users this requires we update them too.

Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131002092529.042563462@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/mips/kernel/rtlx.c         |  19 ++++---
 include/linux/tty.h             |  10 ++--
 include/linux/wait.h            | 113 +++++++++++++++++++---------------------
 net/irda/af_irda.c              |   5 +-
 net/netfilter/ipvs/ip_vs_sync.c |   7 +--
 5 files changed, 73 insertions(+), 81 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index d763f11e35e2..2c12ea1668d1 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -172,8 +172,9 @@ int rtlx_open(int index, int can_sleep)
 	if (rtlx == NULL) {
 		if( (p = vpe_get_shared(tclimit)) == NULL) {
 		    if (can_sleep) {
-			__wait_event_interruptible(channel_wqs[index].lx_queue,
-				(p = vpe_get_shared(tclimit)), ret);
+			ret = __wait_event_interruptible(
+					channel_wqs[index].lx_queue,
+					(p = vpe_get_shared(tclimit)));
 			if (ret)
 				goto out_fail;
 		    } else {
@@ -263,11 +264,10 @@ unsigned int rtlx_read_poll(int index, int can_sleep)
 	/* data available to read? */
 	if (chan->lx_read == chan->lx_write) {
 		if (can_sleep) {
-			int ret = 0;
-
-			__wait_event_interruptible(channel_wqs[index].lx_queue,
+			int ret = __wait_event_interruptible(
+				channel_wqs[index].lx_queue,
 				(chan->lx_read != chan->lx_write) ||
-				sp_stopping, ret);
+				sp_stopping);
 			if (ret)
 				return ret;
 
@@ -440,14 +440,13 @@ static ssize_t file_write(struct file *file, const char __user * buffer,
 
 	/* any space left... */
 	if (!rtlx_write_poll(minor)) {
-		int ret = 0;
+		int ret;
 
 		if (file->f_flags & O_NONBLOCK)
 			return -EAGAIN;
 
-		__wait_event_interruptible(channel_wqs[minor].rt_queue,
-					   rtlx_write_poll(minor),
-					   ret);
+		ret = __wait_event_interruptible(channel_wqs[minor].rt_queue,
+					   rtlx_write_poll(minor));
 		if (ret)
 			return ret;
 	}
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 6e803291028f..633cac77f9f9 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -672,14 +672,14 @@ static inline void tty_wait_until_sent_from_close(struct tty_struct *tty,
 #define wait_event_interruptible_tty(tty, wq, condition)		\
 ({									\
 	int __ret = 0;							\
-	if (!(condition)) {						\
-		__wait_event_interruptible_tty(tty, wq, condition, __ret);	\
-	}								\
+	if (!(condition))						\
+		__ret = __wait_event_interruptible_tty(tty, wq,		\
+						       condition);	\
 	__ret;								\
 })
 
-#define __wait_event_interruptible_tty(tty, wq, condition, ret)		\
-	___wait_event(wq, condition, TASK_INTERRUPTIBLE, 0, ret,	\
+#define __wait_event_interruptible_tty(tty, wq, condition)		\
+	___wait_event(wq, condition, TASK_INTERRUPTIBLE, 0, 0,		\
 			tty_unlock(tty);				\
 			schedule();					\
 			tty_lock(tty))
diff --git a/include/linux/wait.h b/include/linux/wait.h
index c065e8af9749..bd4bd7b479b6 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -179,24 +179,23 @@ wait_queue_head_t *bit_waitqueue(void *, int);
 #define wake_up_interruptible_sync_poll(x, m)				\
 	__wake_up_sync_key((x), TASK_INTERRUPTIBLE, 1, (void *) (m))
 
-#define ___wait_cond_timeout(condition, ret)				\
+#define ___wait_cond_timeout(condition)					\
 ({									\
  	bool __cond = (condition);					\
- 	if (__cond && !ret)						\
- 		ret = 1;						\
- 	__cond || !ret;							\
+ 	if (__cond && !__ret)						\
+ 		__ret = 1;						\
+ 	__cond || !__ret;						\
 })
 
 #define ___wait_signal_pending(state)					\
 	((state == TASK_INTERRUPTIBLE && signal_pending(current)) ||	\
 	 (state == TASK_KILLABLE && fatal_signal_pending(current)))
 
-#define ___wait_nop_ret		int ret __always_unused
-
 #define ___wait_event(wq, condition, state, exclusive, ret, cmd)	\
-do {									\
+({									\
 	__label__ __out;						\
 	DEFINE_WAIT(__wait);						\
+	long __ret = ret;						\
 									\
 	for (;;) {							\
 		if (exclusive)						\
@@ -208,7 +207,7 @@ do {									\
 			break;						\
 									\
 		if (___wait_signal_pending(state)) {			\
-			ret = -ERESTARTSYS;				\
+			__ret = -ERESTARTSYS;				\
 			if (exclusive) {				\
 				abort_exclusive_wait(&wq, &__wait, 	\
 						     state, NULL); 	\
@@ -220,12 +219,12 @@ do {									\
 		cmd;							\
 	}								\
 	finish_wait(&wq, &__wait);					\
-__out:	;								\
-} while (0)
+__out:	__ret;								\
+})
 
 #define __wait_event(wq, condition) 					\
-	___wait_event(wq, condition, TASK_UNINTERRUPTIBLE, 0,		\
-		      ___wait_nop_ret, schedule())
+	(void)___wait_event(wq, condition, TASK_UNINTERRUPTIBLE, 0, 0,	\
+			    schedule())
 
 /**
  * wait_event - sleep until a condition gets true
@@ -246,10 +245,10 @@ do {									\
 	__wait_event(wq, condition);					\
 } while (0)
 
-#define __wait_event_timeout(wq, condition, ret)			\
-	___wait_event(wq, ___wait_cond_timeout(condition, ret), 	\
-		      TASK_UNINTERRUPTIBLE, 0, ret,			\
-		      ret = schedule_timeout(ret))
+#define __wait_event_timeout(wq, condition, timeout)			\
+	___wait_event(wq, ___wait_cond_timeout(condition),		\
+		      TASK_UNINTERRUPTIBLE, 0, timeout,			\
+		      __ret = schedule_timeout(__ret))
 
 /**
  * wait_event_timeout - sleep until a condition gets true or a timeout elapses
@@ -272,12 +271,12 @@ do {									\
 ({									\
 	long __ret = timeout;						\
 	if (!(condition)) 						\
-		__wait_event_timeout(wq, condition, __ret);		\
+		__ret = __wait_event_timeout(wq, condition, timeout);	\
 	__ret;								\
 })
 
-#define __wait_event_interruptible(wq, condition, ret)			\
-	___wait_event(wq, condition, TASK_INTERRUPTIBLE, 0, ret,	\
+#define __wait_event_interruptible(wq, condition)			\
+	___wait_event(wq, condition, TASK_INTERRUPTIBLE, 0, 0,		\
 		      schedule())
 
 /**
@@ -299,14 +298,14 @@ do {									\
 ({									\
 	int __ret = 0;							\
 	if (!(condition))						\
-		__wait_event_interruptible(wq, condition, __ret);	\
+		__ret = __wait_event_interruptible(wq, condition);	\
 	__ret;								\
 })
 
-#define __wait_event_interruptible_timeout(wq, condition, ret)		\
-	___wait_event(wq, ___wait_cond_timeout(condition, ret),		\
-		      TASK_INTERRUPTIBLE, 0, ret,			\
-		      ret = schedule_timeout(ret))
+#define __wait_event_interruptible_timeout(wq, condition, timeout)	\
+	___wait_event(wq, ___wait_cond_timeout(condition),		\
+		      TASK_INTERRUPTIBLE, 0, timeout,			\
+		      __ret = schedule_timeout(__ret))
 
 /**
  * wait_event_interruptible_timeout - sleep until a condition gets true or a timeout elapses
@@ -330,7 +329,8 @@ do {									\
 ({									\
 	long __ret = timeout;						\
 	if (!(condition))						\
-		__wait_event_interruptible_timeout(wq, condition, __ret); \
+		__ret = __wait_event_interruptible_timeout(wq, 		\
+						condition, timeout);	\
 	__ret;								\
 })
 
@@ -347,7 +347,7 @@ do {									\
 				       current->timer_slack_ns,		\
 				       HRTIMER_MODE_REL);		\
 									\
-	___wait_event(wq, condition, state, 0, __ret,			\
+	__ret = ___wait_event(wq, condition, state, 0, 0,		\
 		if (!__t.task) {					\
 			__ret = -ETIME;					\
 			break;						\
@@ -409,15 +409,15 @@ do {									\
 	__ret;								\
 })
 
-#define __wait_event_interruptible_exclusive(wq, condition, ret)	\
-	___wait_event(wq, condition, TASK_INTERRUPTIBLE, 1, ret,	\
+#define __wait_event_interruptible_exclusive(wq, condition)		\
+	___wait_event(wq, condition, TASK_INTERRUPTIBLE, 1, 0,		\
 		      schedule())
 
 #define wait_event_interruptible_exclusive(wq, condition)		\
 ({									\
 	int __ret = 0;							\
 	if (!(condition))						\
-		__wait_event_interruptible_exclusive(wq, condition, __ret);\
+		__ret = __wait_event_interruptible_exclusive(wq, condition);\
 	__ret;								\
 })
 
@@ -570,8 +570,8 @@ do {									\
 
 
 
-#define __wait_event_killable(wq, condition, ret)			\
-	___wait_event(wq, condition, TASK_KILLABLE, 0, ret, schedule())
+#define __wait_event_killable(wq, condition)				\
+	___wait_event(wq, condition, TASK_KILLABLE, 0, 0, schedule())
 
 /**
  * wait_event_killable - sleep until a condition gets true
@@ -592,18 +592,17 @@ do {									\
 ({									\
 	int __ret = 0;							\
 	if (!(condition))						\
-		__wait_event_killable(wq, condition, __ret);		\
+		__ret = __wait_event_killable(wq, condition);		\
 	__ret;								\
 })
 
 
 #define __wait_event_lock_irq(wq, condition, lock, cmd)			\
-	___wait_event(wq, condition, TASK_UNINTERRUPTIBLE, 0,		\
-		      ___wait_nop_ret,					\
-		      spin_unlock_irq(&lock);				\
-		      cmd;						\
-		      schedule();					\
-		      spin_lock_irq(&lock))
+	(void)___wait_event(wq, condition, TASK_UNINTERRUPTIBLE, 0, 0,	\
+			    spin_unlock_irq(&lock);			\
+			    cmd;					\
+			    schedule();					\
+			    spin_lock_irq(&lock))
 
 /**
  * wait_event_lock_irq_cmd - sleep until a condition gets true. The
@@ -663,11 +662,11 @@ do {									\
 } while (0)
 
 
-#define __wait_event_interruptible_lock_irq(wq, condition, lock, ret, cmd) \
-	___wait_event(wq, condition, TASK_INTERRUPTIBLE, 0, ret,	   \
-		      spin_unlock_irq(&lock);				   \
-		      cmd;						   \
-		      schedule();					   \
+#define __wait_event_interruptible_lock_irq(wq, condition, lock, cmd)	\
+	___wait_event(wq, condition, TASK_INTERRUPTIBLE, 0, 0,	   	\
+		      spin_unlock_irq(&lock);				\
+		      cmd;						\
+		      schedule();					\
 		      spin_lock_irq(&lock))
 
 /**
@@ -698,10 +697,9 @@ do {									\
 #define wait_event_interruptible_lock_irq_cmd(wq, condition, lock, cmd)	\
 ({									\
 	int __ret = 0;							\
-									\
 	if (!(condition))						\
-		__wait_event_interruptible_lock_irq(wq, condition,	\
-						    lock, __ret, cmd);	\
+		__ret = __wait_event_interruptible_lock_irq(wq, 	\
+						condition, lock, cmd);	\
 	__ret;								\
 })
 
@@ -730,18 +728,18 @@ do {									\
 #define wait_event_interruptible_lock_irq(wq, condition, lock)		\
 ({									\
 	int __ret = 0;							\
-									\
 	if (!(condition))						\
-		__wait_event_interruptible_lock_irq(wq, condition,	\
-						    lock, __ret, );	\
+		__ret = __wait_event_interruptible_lock_irq(wq,		\
+						condition, lock,)	\
 	__ret;								\
 })
 
-#define __wait_event_interruptible_lock_irq_timeout(wq, condition, lock, ret) \
-	___wait_event(wq, ___wait_cond_timeout(condition, ret),		      \
-		      TASK_INTERRUPTIBLE, 0, ret,	      		      \
-		      spin_unlock_irq(&lock);				      \
-		      ret = schedule_timeout(ret);			      \
+#define __wait_event_interruptible_lock_irq_timeout(wq, condition, 	\
+						    lock, timeout) 	\
+	___wait_event(wq, ___wait_cond_timeout(condition),		\
+		      TASK_INTERRUPTIBLE, 0, ret,	      		\
+		      spin_unlock_irq(&lock);				\
+		      __ret = schedule_timeout(__ret);			\
 		      spin_lock_irq(&lock));
 
 /**
@@ -771,11 +769,10 @@ do {									\
 #define wait_event_interruptible_lock_irq_timeout(wq, condition, lock,	\
 						  timeout)		\
 ({									\
-	int __ret = timeout;						\
-									\
+	long __ret = timeout;						\
 	if (!(condition))						\
-		__wait_event_interruptible_lock_irq_timeout(		\
-					wq, condition, lock, __ret);	\
+		__ret = __wait_event_interruptible_lock_irq_timeout(	\
+					wq, condition, lock, timeout);	\
 	__ret;								\
 })
 
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index 0578d4fa00a9..0f676908d15b 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -2563,9 +2563,8 @@ bed:
 				  jiffies + msecs_to_jiffies(val));
 
 			/* Wait for IR-LMP to call us back */
-			__wait_event_interruptible(self->query_wait,
-			      (self->cachedaddr != 0 || self->errno == -ETIME),
-						   err);
+			err = __wait_event_interruptible(self->query_wait,
+			      (self->cachedaddr != 0 || self->errno == -ETIME));
 
 			/* If watchdog is still activated, kill it! */
 			del_timer(&(self->watchdog));
diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index f4484719f3e6..f63c2388f38d 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -1637,12 +1637,9 @@ static int sync_thread_master(void *data)
 			continue;
 		}
 		while (ip_vs_send_sync_msg(tinfo->sock, sb->mesg) < 0) {
-			int ret = 0;
-
-			__wait_event_interruptible(*sk_sleep(sk),
+			int ret = __wait_event_interruptible(*sk_sleep(sk),
 						   sock_writeable(sk) ||
-						   kthread_should_stop(),
-						   ret);
+						   kthread_should_stop());
 			if (unlikely(kthread_should_stop()))
 				goto done;
 		}
-- 
cgit v1.2.3


From 722da9d20e7f203ddbb54aba32f95a020d41fc42 Mon Sep 17 00:00:00 2001
From: Leif Lindholm
Date: Thu, 3 Oct 2013 15:42:37 +0100
Subject: x86/efi: Fix config_table_type array termination

Incorrect use of 0 in terminating entry of arch_tables[] causes the
following sparse warning,

  arch/x86/platform/efi/efi.c:74:27: sparse: Using plain integer as NULL pointer

Replace with NULL.

Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
[ Included sparse warning in commit message. ]
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/x86/platform/efi/efi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index fbc1d70188f8..1d3372ac9c66 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -71,7 +71,7 @@ static __initdata efi_config_table_type_t arch_tables[] = {
 #ifdef CONFIG_X86_UV
 	{UV_SYSTEM_TABLE_GUID, "UVsystab", &efi.uv_systab},
 #endif
-	{NULL_GUID, NULL, 0},
+	{NULL_GUID, NULL, NULL},
 };
 
 /*
-- 
cgit v1.2.3


From 38901f1c1cae241fd4e3c5e63fcc690b921734b1 Mon Sep 17 00:00:00 2001
From: Andi Kleen
Date: Fri, 4 Oct 2013 14:37:56 -0700
Subject: x86/iommu: Don't make AMD_GART depend on EXPERT and default y

The AMD_GART driver was made EXPERT/EMBEDDED a long time
ago to avoid unbootable 64bit systems with 32bit only devices.

This was before swiotlb was there, which does the job
of this fallback today. SWIOTLB is always on, so systems
should always boot.

The drawback is that every system has to compile that
driver in (it cannot be a module).

Also:
 - Newer AMD CPUs (the APUs) don't seem to have AMD_GART support
   at all anymore.

 - Newer AMD platforms have a much better real IOMMU

 - The AMD GART driver was never very good (lots of overhead,
   e.g. in flushing due to some workarounds) and it's doubtful it's
   really better than SWIOTLB.

 - On older K8 systems it didn't even work with all chipsets.

 - The 32bit device bounce buffer case should be rare/
   non performance critical these days anyways.

 - On non AMD systems it is not needed at all.

So drop the EXPERT dependency on AMD_GART and remove the
default y. The driver can be still compiled in, just
it's an explicit decision now, and people who don't want
it can unselect it.

I also clarified the description a bit.

This allows to save ~8K text on most modern x86-64 systems.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1380922676-23007-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/Kconfig | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index ee2fb9d37745..c9d2b81ea310 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -756,17 +756,16 @@ config DMI
 	  BIOS code.
 
 config GART_IOMMU
-	bool "GART IOMMU support" if EXPERT
-	default y
+	bool "Old AMD GART IOMMU support"
 	select SWIOTLB
 	depends on X86_64 && PCI && AMD_NB
 	---help---
 	  Support for full DMA access of devices with 32bit memory access only
 	  on systems with more than 3GB. This is usually needed for USB,
 	  sound, many IDE/SATA chipsets and some other devices.
-	  Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART
-	  based hardware IOMMU and a software bounce buffer based IOMMU used
-	  on Intel systems and as fallback.
+	  Provides a driver for the older AMD Athlon64/Opteron/Turion/Sempron GART
+	  based hardware IOMMU.
+	  Newer systems typically have a better AMD IOMMU.
 	  The code is only active when needed (enough memory and limited
 	  device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified
 	  too.
-- 
cgit v1.2.3


From ced3c42c9fcba049ec9c76c8461ac194cafb20ba Mon Sep 17 00:00:00 2001
From: Ingo Molnar
Date: Sun, 6 Oct 2013 11:45:20 +0200
Subject: x86/iommu: Clean up the CONFIG_GART_IOMMU config option a bit

Improve the explanation of this config option.

Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Link: http://lkml.kernel.org/n/tip-gUMmysvsbl3mccbyf6olmxqg@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/Kconfig | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index c9d2b81ea310..7081958a32fb 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -760,15 +760,21 @@ config GART_IOMMU
 	select SWIOTLB
 	depends on X86_64 && PCI && AMD_NB
 	---help---
-	  Support for full DMA access of devices with 32bit memory access only
-	  on systems with more than 3GB. This is usually needed for USB,
-	  sound, many IDE/SATA chipsets and some other devices.
-	  Provides a driver for the older AMD Athlon64/Opteron/Turion/Sempron GART
-	  based hardware IOMMU.
-	  Newer systems typically have a better AMD IOMMU.
-	  The code is only active when needed (enough memory and limited
-	  device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified
-	  too.
+	  Provides a driver for older AMD Athlon64/Opteron/Turion/Sempron
+	  GART based hardware IOMMUs.
+
+	  The GART supports full DMA access for devices with 32-bit access
+	  limitations, on systems with more than 3 GB. This is usually needed
+	  for USB, sound, many IDE/SATA chipsets and some other devices.
+
+	  Newer systems typically have a modern AMD IOMMU, supported via
+	  the CONFIG_AMD_IOMMU=y config option.
+
+	  In normal configurations this driver is only active when needed:
+	  there's more than 3 GB of memory and the system contains a
+	  32-bit limited device.
+
+	  If unsure, say Y.
 
 config CALGARY_IOMMU
 	bool "IBM Calgary IOMMU support"
-- 
cgit v1.2.3


From 3eb15d84e355f4ea1acf0eaba11ca173de342107 Mon Sep 17 00:00:00 2001
From: Loc Ho
Date: Wed, 26 Jun 2013 11:56:10 -0600
Subject: clk: arm64: Add DTS clock entry for APM X-Gene Storm SoC

clk: arm64: Add DTS clock entry for APM X-Gene Storm SoC with reference to
reference, PCP PLL, SoC PLL, and Ethernet clocks.

Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Kumar Sankaran <ksankaran@apm.com>
Signed-off-by: Vinayak Kale <vkale@apm.com>
Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 arch/arm64/boot/dts/apm-storm.dtsi | 75 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 75 insertions(+)

(limited to 'arch')

diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi
index bfdc57834929..d37d7369e260 100644
--- a/arch/arm64/boot/dts/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm-storm.dtsi
@@ -103,6 +103,81 @@
 		#size-cells = <2>;
 		ranges;
 
+		clocks {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			refclk: refclk {
+				compatible = "fixed-clock";
+				#clock-cells = <1>;
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk";
+			};
+
+			pcppll: pcppll@17000100 {
+				compatible = "apm,xgene-pcppll-clock";
+				#clock-cells = <1>;
+				clocks = <&refclk 0>;
+				clock-names = "pcppll";
+				reg = <0x0 0x17000100 0x0 0x1000>;
+				clock-output-names = "pcppll";
+				type = <0>;
+			};
+
+			socpll: socpll@17000120 {
+				compatible = "apm,xgene-socpll-clock";
+				#clock-cells = <1>;
+				clocks = <&refclk 0>;
+				clock-names = "socpll";
+				reg = <0x0 0x17000120 0x0 0x1000>;
+				clock-output-names = "socpll";
+				type = <1>;
+			};
+
+			socplldiv2: socplldiv2  {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <1>;
+				clocks = <&socpll 0>;
+				clock-names = "socplldiv2";
+				clock-mult = <1>;
+				clock-div = <2>;
+				clock-output-names = "socplldiv2";
+			};
+
+			qmlclk: qmlclk {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				clock-names = "qmlclk";
+				reg = <0x0 0x1703C000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "qmlclk";
+			};
+
+			ethclk: ethclk {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				clock-names = "ethclk";
+				reg = <0x0 0x17000000 0x0 0x1000>;
+				reg-names = "div-reg";
+				divider-offset = <0x238>;
+				divider-width = <0x9>;
+				divider-shift = <0x0>;
+				clock-output-names = "ethclk";
+			};
+
+			eth8clk: eth8clk {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&ethclk 0>;
+				clock-names = "eth8clk";
+				reg = <0x0 0x1702C000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "eth8clk";
+			};
+		};
+
 		serial0: serial@1c020000 {
 			device_type = "serial";
 			compatible = "ns16550";
-- 
cgit v1.2.3


From fb85f4290ddf646548ac30848863f3211c3d2e54 Mon Sep 17 00:00:00 2001
From: Qipan Li
Date: Sun, 29 Sep 2013 22:27:57 +0800
Subject: pinctrl: sirf: add lost uart0-no-stream-control pingroup for prima2

the old codes defined uart0_nostreamctrl_pins, but missed pingroup
and padmux definition for it. this patch fixes it.

Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/prima2.dtsi         | 6 ++++++
 drivers/pinctrl/sirf/pinctrl-prima2.c | 3 +++
 2 files changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
index bbeb623fc2c6..766aa395f85c 100644
--- a/arch/arm/boot/dts/prima2.dtsi
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -341,6 +341,12 @@
 						sirf,function = "uart0";
 					};
 				};
+				uart0_noflow_pins_a: uart0@1 {
+					uart {
+						sirf,pins = "uart0_nostreamctrlgrp";
+						sirf,function = "uart0_nostreamctrl";
+					};
+				};
 				uart1_pins_a: uart1@0 {
 					uart {
 						sirf,pins = "uart1grp";
diff --git a/drivers/pinctrl/sirf/pinctrl-prima2.c b/drivers/pinctrl/sirf/pinctrl-prima2.c
index 1f0ad1ef5a3a..29fc842b6d91 100644
--- a/drivers/pinctrl/sirf/pinctrl-prima2.c
+++ b/drivers/pinctrl/sirf/pinctrl-prima2.c
@@ -764,6 +764,7 @@ static const struct sirfsoc_pin_group sirfsoc_pin_groups[] = {
 	SIRFSOC_PIN_GROUP("lcd_24bitsgrp", lcd_24bits_pins),
 	SIRFSOC_PIN_GROUP("lcdrom_grp", lcdrom_pins),
 	SIRFSOC_PIN_GROUP("uart0grp", uart0_pins),
+	SIRFSOC_PIN_GROUP("uart0_nostreamctrlgrp", uart0_nostreamctrl_pins),
 	SIRFSOC_PIN_GROUP("uart1grp", uart1_pins),
 	SIRFSOC_PIN_GROUP("uart2grp", uart2_pins),
 	SIRFSOC_PIN_GROUP("uart2_nostreamctrlgrp", uart2_nostreamctrl_pins),
@@ -803,6 +804,7 @@ static const char * const lcd_18bitsgrp[] = { "lcd_18bitsgrp" };
 static const char * const lcd_24bitsgrp[] = { "lcd_24bitsgrp" };
 static const char * const lcdromgrp[] = { "lcdromgrp" };
 static const char * const uart0grp[] = { "uart0grp" };
+static const char * const uart0_nostreamctrlgrp[] = { "uart0_nostreamctrlgrp" };
 static const char * const uart1grp[] = { "uart1grp" };
 static const char * const uart2grp[] = { "uart2grp" };
 static const char * const uart2_nostreamctrlgrp[] = { "uart2_nostreamctrlgrp" };
@@ -842,6 +844,7 @@ static const struct sirfsoc_pmx_func sirfsoc_pmx_functions[] = {
 	SIRFSOC_PMX_FUNCTION("lcd_24bits", lcd_24bitsgrp, lcd_24bits_padmux),
 	SIRFSOC_PMX_FUNCTION("lcdrom", lcdromgrp, lcdrom_padmux),
 	SIRFSOC_PMX_FUNCTION("uart0", uart0grp, uart0_padmux),
+	SIRFSOC_PMX_FUNCTION("uart0_nostreamctrl", uart0_nostreamctrlgrp, uart0_nostreamctrl_padmux),
 	SIRFSOC_PMX_FUNCTION("uart1", uart1grp, uart1_padmux),
 	SIRFSOC_PMX_FUNCTION("uart2", uart2grp, uart2_padmux),
 	SIRFSOC_PMX_FUNCTION("uart2_nostreamctrl", uart2_nostreamctrlgrp, uart2_nostreamctrl_padmux),
-- 
cgit v1.2.3


From af614b2301f0e30423240a754ec2812a4c793201 Mon Sep 17 00:00:00 2001
From: Qipan Li
Date: Sun, 29 Sep 2013 22:27:58 +0800
Subject: pinctrl: sirf: add lost USP-based UART pin groups for prima2

USP(Universal Serial Ports) can be UART as commit 5df831117b85a08e7aa,
this patch defines the USP-based UART function pin groups for prima2.

Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/prima2.dtsi         | 24 ++++++++++++++
 drivers/pinctrl/sirf/pinctrl-prima2.c | 60 +++++++++++++++++++++++++++++++++++
 2 files changed, 84 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
index 766aa395f85c..569763a0e788 100644
--- a/arch/arm/boot/dts/prima2.dtsi
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -485,18 +485,42 @@
                                                 sirf,function = "usp0";
                                         };
                                 };
+				usp0_uart_nostreamctrl_pins_a: usp0@1 {
+                                        usp0 {
+                                                sirf,pins =
+							"usp0_uart_nostreamctrl_grp";
+                                                sirf,function =
+							"usp0_uart_nostreamctrl";
+                                        };
+                                };
                                 usp1_pins_a: usp1@0 {
                                         usp1 {
                                                 sirf,pins = "usp1grp";
                                                 sirf,function = "usp1";
                                         };
                                 };
+				usp1_uart_nostreamctrl_pins_a: usp1@1 {
+                                        usp1 {
+                                                sirf,pins =
+							"usp1_uart_nostreamctrl_grp";
+                                                sirf,function =
+							"usp1_uart_nostreamctrl";
+                                        };
+                                };
                                 usp2_pins_a: usp2@0 {
                                         usp2 {
                                                 sirf,pins = "usp2grp";
                                                 sirf,function = "usp2";
                                         };
                                 };
+				usp2_uart_nostreamctrl_pins_a: usp2@1 {
+                                        usp2 {
+                                                sirf,pins =
+							"usp2_uart_nostreamctrl_grp";
+                                                sirf,function =
+							"usp2_uart_nostreamctrl";
+                                        };
+                                };
                                 usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus@0 {
                                         usb0_utmi_drvbus {
                                                 sirf,pins = "usb0_utmi_drvbusgrp";
diff --git a/drivers/pinctrl/sirf/pinctrl-prima2.c b/drivers/pinctrl/sirf/pinctrl-prima2.c
index 29fc842b6d91..241d83992692 100644
--- a/drivers/pinctrl/sirf/pinctrl-prima2.c
+++ b/drivers/pinctrl/sirf/pinctrl-prima2.c
@@ -485,6 +485,20 @@ static const struct sirfsoc_padmux usp0_padmux = {
 
 static const unsigned usp0_pins[] = { 51, 52, 53, 54, 55 };
 
+static const struct sirfsoc_muxmask usp0_uart_nostreamctrl_muxmask[] = {
+	{
+		.group = 1,
+		.mask = BIT(20) | BIT(21),
+	},
+};
+
+static const struct sirfsoc_padmux usp0_uart_nostreamctrl_padmux = {
+	.muxmask_counts = ARRAY_SIZE(usp0_uart_nostreamctrl_muxmask),
+	.muxmask = usp0_uart_nostreamctrl_muxmask,
+};
+
+static const unsigned usp0_uart_nostreamctrl_pins[] = { 52, 53 };
+
 static const struct sirfsoc_muxmask usp1_muxmask[] = {
 	{
 		.group = 1,
@@ -501,6 +515,20 @@ static const struct sirfsoc_padmux usp1_padmux = {
 
 static const unsigned usp1_pins[] = { 56, 57, 58, 59, 60 };
 
+static const struct sirfsoc_muxmask usp1_uart_nostreamctrl_muxmask[] = {
+	{
+		.group = 1,
+		.mask = BIT(25) | BIT(26),
+	},
+};
+
+static const struct sirfsoc_padmux usp1_uart_nostreamctrl_padmux = {
+	.muxmask_counts = ARRAY_SIZE(usp1_uart_nostreamctrl_muxmask),
+	.muxmask = usp1_uart_nostreamctrl_muxmask,
+};
+
+static const unsigned usp1_uart_nostreamctrl_pins[] = { 57, 58 };
+
 static const struct sirfsoc_muxmask usp2_muxmask[] = {
 	{
 		.group = 1,
@@ -520,6 +548,20 @@ static const struct sirfsoc_padmux usp2_padmux = {
 
 static const unsigned usp2_pins[] = { 61, 62, 63, 64, 65 };
 
+static const struct sirfsoc_muxmask usp2_uart_nostreamctrl_muxmask[] = {
+	{
+		.group = 1,
+		.mask = BIT(30) | BIT(31),
+	},
+};
+
+static const struct sirfsoc_padmux usp2_uart_nostreamctrl_padmux = {
+	.muxmask_counts = ARRAY_SIZE(usp2_uart_nostreamctrl_muxmask),
+	.muxmask = usp2_uart_nostreamctrl_muxmask,
+};
+
+static const unsigned usp2_uart_nostreamctrl_pins[] = { 62, 63 };
+
 static const struct sirfsoc_muxmask nand_muxmask[] = {
 	{
 		.group = 2,
@@ -769,8 +811,14 @@ static const struct sirfsoc_pin_group sirfsoc_pin_groups[] = {
 	SIRFSOC_PIN_GROUP("uart2grp", uart2_pins),
 	SIRFSOC_PIN_GROUP("uart2_nostreamctrlgrp", uart2_nostreamctrl_pins),
 	SIRFSOC_PIN_GROUP("usp0grp", usp0_pins),
+	SIRFSOC_PIN_GROUP("usp0_uart_nostreamctrl_grp",
+					usp0_uart_nostreamctrl_pins),
 	SIRFSOC_PIN_GROUP("usp1grp", usp1_pins),
+	SIRFSOC_PIN_GROUP("usp1_uart_nostreamctrl_grp",
+					usp1_uart_nostreamctrl_pins),
 	SIRFSOC_PIN_GROUP("usp2grp", usp2_pins),
+	SIRFSOC_PIN_GROUP("usp2_uart_nostreamctrl_grp",
+					usp2_uart_nostreamctrl_pins),
 	SIRFSOC_PIN_GROUP("i2c0grp", i2c0_pins),
 	SIRFSOC_PIN_GROUP("i2c1grp", i2c1_pins),
 	SIRFSOC_PIN_GROUP("pwm0grp", pwm0_pins),
@@ -809,8 +857,14 @@ static const char * const uart1grp[] = { "uart1grp" };
 static const char * const uart2grp[] = { "uart2grp" };
 static const char * const uart2_nostreamctrlgrp[] = { "uart2_nostreamctrlgrp" };
 static const char * const usp0grp[] = { "usp0grp" };
+static const char * const usp0_uart_nostreamctrl_grp[] =
+					{ "usp0_uart_nostreamctrl_grp" };
 static const char * const usp1grp[] = { "usp1grp" };
+static const char * const usp1_uart_nostreamctrl_grp[] =
+					{ "usp1_uart_nostreamctrl_grp" };
 static const char * const usp2grp[] = { "usp2grp" };
+static const char * const usp2_uart_nostreamctrl_grp[] =
+					{ "usp2_uart_nostreamctrl_grp" };
 static const char * const i2c0grp[] = { "i2c0grp" };
 static const char * const i2c1grp[] = { "i2c1grp" };
 static const char * const pwm0grp[] = { "pwm0grp" };
@@ -849,8 +903,14 @@ static const struct sirfsoc_pmx_func sirfsoc_pmx_functions[] = {
 	SIRFSOC_PMX_FUNCTION("uart2", uart2grp, uart2_padmux),
 	SIRFSOC_PMX_FUNCTION("uart2_nostreamctrl", uart2_nostreamctrlgrp, uart2_nostreamctrl_padmux),
 	SIRFSOC_PMX_FUNCTION("usp0", usp0grp, usp0_padmux),
+	SIRFSOC_PMX_FUNCTION("usp0_uart_nostreamctrl",
+		usp0_uart_nostreamctrl_grp, usp0_uart_nostreamctrl_padmux),
 	SIRFSOC_PMX_FUNCTION("usp1", usp1grp, usp1_padmux),
+	SIRFSOC_PMX_FUNCTION("usp1_uart_nostreamctrl",
+		usp1_uart_nostreamctrl_grp, usp1_uart_nostreamctrl_padmux),
 	SIRFSOC_PMX_FUNCTION("usp2", usp2grp, usp2_padmux),
+	SIRFSOC_PMX_FUNCTION("usp2_uart_nostreamctrl",
+		usp2_uart_nostreamctrl_grp, usp2_uart_nostreamctrl_padmux),
 	SIRFSOC_PMX_FUNCTION("i2c0", i2c0grp, i2c0_padmux),
 	SIRFSOC_PMX_FUNCTION("i2c1", i2c1grp, i2c1_padmux),
 	SIRFSOC_PMX_FUNCTION("pwm0", pwm0grp, pwm0_padmux),
-- 
cgit v1.2.3


From 6a08a92ec45782e5543addf5f8785e2560a078f6 Mon Sep 17 00:00:00 2001
From: Rong Wang
Date: Sun, 29 Sep 2013 22:27:59 +0800
Subject: pinctrl: sirf: add USB1/UART1 pinmux usb/uart share

dn and dp of USB1 can share with UART1(UART1 can route rx,tx to dn and dp pins of USB1).
here we add this pinmux capability.
USB1/UART1 mode selection has dedicated control register in RSC module, here we attach
the register offset of private data of related pin groups.

Signed-off-by: Rong Wang <Rong.Wang@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/atlas6.dtsi         | 12 ++++++++
 arch/arm/boot/dts/prima2.dtsi         | 12 ++++++++
 drivers/pinctrl/sirf/pinctrl-atlas6.c | 56 +++++++++++++++++++++++++++++++++++
 drivers/pinctrl/sirf/pinctrl-prima2.c | 52 ++++++++++++++++++++++++++++++++
 drivers/pinctrl/sirf/pinctrl-sirf.c   |  8 ++---
 drivers/pinctrl/sirf/pinctrl-sirf.h   |  6 ++--
 6 files changed, 140 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
index 8678e0c11119..378d4116dbf2 100644
--- a/arch/arm/boot/dts/atlas6.dtsi
+++ b/arch/arm/boot/dts/atlas6.dtsi
@@ -515,6 +515,18 @@
                                                 sirf,function = "usb1_utmi_drvbus";
                                         };
                                 };
+                                usb1_dp_dn_pins_a: usb1_dp_dn@0 {
+                                        usb1_dp_dn {
+                                                sirf,pins = "usb1_dp_dngrp";
+                                                sirf,function = "usb1_dp_dn";
+                                        };
+                                };
+                                uart1_route_io_usb1_pins_a: uart1_route_io_usb1@0 {
+                                        uart1_route_io_usb1 {
+                                                sirf,pins = "uart1_route_io_usb1grp";
+                                                sirf,function = "uart1_route_io_usb1";
+                                        };
+                                };
                                 warm_rst_pins_a: warm_rst@0 {
                                         warm_rst {
                                                 sirf,pins = "warm_rstgrp";
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
index 569763a0e788..fb2ffaeaefbc 100644
--- a/arch/arm/boot/dts/prima2.dtsi
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -533,6 +533,18 @@
                                                 sirf,function = "usb1_utmi_drvbus";
                                         };
                                 };
+                                usb1_dp_dn_pins_a: usb1_dp_dn@0 {
+                                        usb1_dp_dn {
+                                                sirf,pins = "usb1_dp_dngrp";
+                                                sirf,function = "usb1_dp_dn";
+                                        };
+                                };
+                                uart1_route_io_usb1_pins_a: uart1_route_io_usb1@0 {
+                                        uart1_route_io_usb1 {
+                                                sirf,pins = "uart1_route_io_usb1grp";
+                                                sirf,function = "uart1_route_io_usb1";
+                                        };
+                                };
                                 warm_rst_pins_a: warm_rst@0 {
                                         warm_rst {
                                                 sirf,pins = "warm_rstgrp";
diff --git a/drivers/pinctrl/sirf/pinctrl-atlas6.c b/drivers/pinctrl/sirf/pinctrl-atlas6.c
index edf45a6940ca..8ab7898d21be 100644
--- a/drivers/pinctrl/sirf/pinctrl-atlas6.c
+++ b/drivers/pinctrl/sirf/pinctrl-atlas6.c
@@ -122,6 +122,9 @@ static const struct pinctrl_pin_desc sirfsoc_pads[] = {
 	PINCTRL_PIN(100, "ac97_dout"),
 	PINCTRL_PIN(101, "ac97_din"),
 	PINCTRL_PIN(102, "x_rtc_io"),
+
+	PINCTRL_PIN(103, "x_usb1_dp"),
+	PINCTRL_PIN(104, "x_usb1_dn"),
 };
 
 static const struct sirfsoc_muxmask lcd_16bits_sirfsoc_muxmask[] = {
@@ -139,6 +142,7 @@ static const struct sirfsoc_muxmask lcd_16bits_sirfsoc_muxmask[] = {
 static const struct sirfsoc_padmux lcd_16bits_padmux = {
 	.muxmask_counts = ARRAY_SIZE(lcd_16bits_sirfsoc_muxmask),
 	.muxmask = lcd_16bits_sirfsoc_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(4),
 	.funcval = 0,
 };
@@ -164,6 +168,7 @@ static const struct sirfsoc_muxmask lcd_18bits_muxmask[] = {
 static const struct sirfsoc_padmux lcd_18bits_padmux = {
 	.muxmask_counts = ARRAY_SIZE(lcd_18bits_muxmask),
 	.muxmask = lcd_18bits_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(4) | BIT(15),
 	.funcval = 0,
 };
@@ -189,6 +194,7 @@ static const struct sirfsoc_muxmask lcd_24bits_muxmask[] = {
 static const struct sirfsoc_padmux lcd_24bits_padmux = {
 	.muxmask_counts = ARRAY_SIZE(lcd_24bits_muxmask),
 	.muxmask = lcd_24bits_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(4) | BIT(15),
 	.funcval = 0,
 };
@@ -214,6 +220,7 @@ static const struct sirfsoc_muxmask lcdrom_muxmask[] = {
 static const struct sirfsoc_padmux lcdrom_padmux = {
 	.muxmask_counts = ARRAY_SIZE(lcdrom_muxmask),
 	.muxmask = lcdrom_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(4),
 	.funcval = BIT(4),
 };
@@ -237,6 +244,7 @@ static const struct sirfsoc_muxmask uart0_muxmask[] = {
 static const struct sirfsoc_padmux uart0_padmux = {
 	.muxmask_counts = ARRAY_SIZE(uart0_muxmask),
 	.muxmask = uart0_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(9),
 	.funcval = BIT(9),
 };
@@ -284,6 +292,7 @@ static const struct sirfsoc_muxmask uart2_muxmask[] = {
 static const struct sirfsoc_padmux uart2_padmux = {
 	.muxmask_counts = ARRAY_SIZE(uart2_muxmask),
 	.muxmask = uart2_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(10),
 	.funcval = BIT(10),
 };
@@ -317,6 +326,7 @@ static const struct sirfsoc_muxmask sdmmc3_muxmask[] = {
 static const struct sirfsoc_padmux sdmmc3_padmux = {
 	.muxmask_counts = ARRAY_SIZE(sdmmc3_muxmask),
 	.muxmask = sdmmc3_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(7),
 	.funcval = 0,
 };
@@ -336,6 +346,7 @@ static const struct sirfsoc_muxmask spi0_muxmask[] = {
 static const struct sirfsoc_padmux spi0_padmux = {
 	.muxmask_counts = ARRAY_SIZE(spi0_muxmask),
 	.muxmask = spi0_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(7),
 	.funcval = BIT(7),
 };
@@ -352,6 +363,7 @@ static const struct sirfsoc_muxmask cko1_muxmask[] = {
 static const struct sirfsoc_padmux cko1_padmux = {
 	.muxmask_counts = ARRAY_SIZE(cko1_muxmask),
 	.muxmask = cko1_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(3),
 	.funcval = 0,
 };
@@ -371,6 +383,7 @@ static const struct sirfsoc_muxmask i2s_muxmask[] = {
 static const struct sirfsoc_padmux i2s_padmux = {
 	.muxmask_counts = ARRAY_SIZE(i2s_muxmask),
 	.muxmask = i2s_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(3),
 	.funcval = BIT(3),
 };
@@ -390,6 +403,7 @@ static const struct sirfsoc_muxmask i2s_no_din_muxmask[] = {
 static const struct sirfsoc_padmux i2s_no_din_padmux = {
 	.muxmask_counts = ARRAY_SIZE(i2s_no_din_muxmask),
 	.muxmask = i2s_no_din_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(3),
 	.funcval = BIT(3),
 };
@@ -409,6 +423,7 @@ static const struct sirfsoc_muxmask i2s_6chn_muxmask[] = {
 static const struct sirfsoc_padmux i2s_6chn_padmux = {
 	.muxmask_counts = ARRAY_SIZE(i2s_6chn_muxmask),
 	.muxmask = i2s_6chn_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(1) | BIT(3) | BIT(9),
 	.funcval = BIT(1) | BIT(3) | BIT(9),
 };
@@ -439,6 +454,7 @@ static const struct sirfsoc_muxmask spi1_muxmask[] = {
 static const struct sirfsoc_padmux spi1_padmux = {
 	.muxmask_counts = ARRAY_SIZE(spi1_muxmask),
 	.muxmask = spi1_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(16),
 	.funcval = 0,
 };
@@ -455,6 +471,7 @@ static const struct sirfsoc_muxmask sdmmc1_muxmask[] = {
 static const struct sirfsoc_padmux sdmmc1_padmux = {
 	.muxmask_counts = ARRAY_SIZE(sdmmc1_muxmask),
 	.muxmask = sdmmc1_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(5),
 	.funcval = BIT(5),
 };
@@ -471,6 +488,7 @@ static const struct sirfsoc_muxmask gps_muxmask[] = {
 static const struct sirfsoc_padmux gps_padmux = {
 	.muxmask_counts = ARRAY_SIZE(gps_muxmask),
 	.muxmask = gps_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(13),
 	.funcval = 0,
 };
@@ -487,6 +505,7 @@ static const struct sirfsoc_muxmask sdmmc5_muxmask[] = {
 static const struct sirfsoc_padmux sdmmc5_padmux = {
 	.muxmask_counts = ARRAY_SIZE(sdmmc5_muxmask),
 	.muxmask = sdmmc5_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(13),
 	.funcval = BIT(13),
 };
@@ -503,6 +522,7 @@ static const struct sirfsoc_muxmask usp0_muxmask[] = {
 static const struct sirfsoc_padmux usp0_padmux = {
 	.muxmask_counts = ARRAY_SIZE(usp0_muxmask),
 	.muxmask = usp0_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(1) | BIT(2) | BIT(9),
 	.funcval = 0,
 };
@@ -535,6 +555,7 @@ static const struct sirfsoc_muxmask usp1_muxmask[] = {
 static const struct sirfsoc_padmux usp1_padmux = {
 	.muxmask_counts = ARRAY_SIZE(usp1_muxmask),
 	.muxmask = usp1_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(16),
 	.funcval = BIT(16),
 };
@@ -554,6 +575,7 @@ static const struct sirfsoc_muxmask nand_muxmask[] = {
 static const struct sirfsoc_padmux nand_padmux = {
 	.muxmask_counts = ARRAY_SIZE(nand_muxmask),
 	.muxmask = nand_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(5) | BIT(19),
 	.funcval = 0,
 };
@@ -570,6 +592,7 @@ static const struct sirfsoc_muxmask sdmmc0_muxmask[] = {
 static const struct sirfsoc_padmux sdmmc0_padmux = {
 	.muxmask_counts = ARRAY_SIZE(sdmmc0_muxmask),
 	.muxmask = sdmmc0_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(5) | BIT(19),
 	.funcval = BIT(19),
 };
@@ -586,6 +609,7 @@ static const struct sirfsoc_muxmask sdmmc2_muxmask[] = {
 static const struct sirfsoc_padmux sdmmc2_padmux = {
 	.muxmask_counts = ARRAY_SIZE(sdmmc2_muxmask),
 	.muxmask = sdmmc2_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(11),
 	.funcval = 0,
 };
@@ -602,6 +626,7 @@ static const struct sirfsoc_muxmask sdmmc2_nowp_muxmask[] = {
 static const struct sirfsoc_padmux sdmmc2_nowp_padmux = {
 	.muxmask_counts = ARRAY_SIZE(sdmmc2_nowp_muxmask),
 	.muxmask = sdmmc2_nowp_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(11),
 	.funcval = 0,
 };
@@ -634,6 +659,7 @@ static const struct sirfsoc_muxmask vip_muxmask[] = {
 static const struct sirfsoc_padmux vip_padmux = {
 	.muxmask_counts = ARRAY_SIZE(vip_muxmask),
 	.muxmask = vip_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(18),
 	.funcval = BIT(18),
 };
@@ -654,6 +680,7 @@ static const struct sirfsoc_muxmask vip_noupli_muxmask[] = {
 static const struct sirfsoc_padmux vip_noupli_padmux = {
 	.muxmask_counts = ARRAY_SIZE(vip_noupli_muxmask),
 	.muxmask = vip_noupli_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(15),
 	.funcval = BIT(15),
 };
@@ -684,6 +711,7 @@ static const struct sirfsoc_muxmask i2c1_muxmask[] = {
 static const struct sirfsoc_padmux i2c1_padmux = {
 	.muxmask_counts = ARRAY_SIZE(i2c1_muxmask),
 	.muxmask = i2c1_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(16),
 	.funcval = 0,
 };
@@ -700,6 +728,7 @@ static const struct sirfsoc_muxmask pwm0_muxmask[] = {
 static const struct sirfsoc_padmux pwm0_padmux = {
 	.muxmask_counts = ARRAY_SIZE(pwm0_muxmask),
 	.muxmask = pwm0_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(12),
 	.funcval = 0,
 };
@@ -772,6 +801,7 @@ static const struct sirfsoc_muxmask warm_rst_muxmask[] = {
 static const struct sirfsoc_padmux warm_rst_padmux = {
 	.muxmask_counts = ARRAY_SIZE(warm_rst_muxmask),
 	.muxmask = warm_rst_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(4),
 	.funcval = 0,
 };
@@ -789,6 +819,7 @@ static const struct sirfsoc_muxmask usb0_upli_drvbus_muxmask[] = {
 static const struct sirfsoc_padmux usb0_upli_drvbus_padmux = {
 	.muxmask_counts = ARRAY_SIZE(usb0_upli_drvbus_muxmask),
 	.muxmask = usb0_upli_drvbus_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(18),
 	.funcval = 0,
 };
@@ -805,12 +836,31 @@ static const struct sirfsoc_muxmask usb1_utmi_drvbus_muxmask[] = {
 static const struct sirfsoc_padmux usb1_utmi_drvbus_padmux = {
 	.muxmask_counts = ARRAY_SIZE(usb1_utmi_drvbus_muxmask),
 	.muxmask = usb1_utmi_drvbus_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(11),
 	.funcval = BIT(11), /* refer to PAD_UTMI_DRVVBUS1_ENABLE */
 };
 
 static const unsigned usb1_utmi_drvbus_pins[] = { 28 };
 
+static const struct sirfsoc_padmux usb1_dp_dn_padmux = {
+	.muxmask_counts = 0,
+	.ctrlreg = SIRFSOC_RSC_USB_UART_SHARE,
+	.funcmask = BIT(2),
+	.funcval = BIT(2),
+};
+
+static const unsigned usb1_dp_dn_pins[] = { 103, 104 };
+
+static const struct sirfsoc_padmux uart1_route_io_usb1_padmux = {
+	.muxmask_counts = 0,
+	.ctrlreg = SIRFSOC_RSC_USB_UART_SHARE,
+	.funcmask = BIT(2),
+	.funcval = 0,
+};
+
+static const unsigned uart1_route_io_usb1_pins[] = { 103, 104 };
+
 static const struct sirfsoc_muxmask pulse_count_muxmask[] = {
 	{
 		.group = 0,
@@ -859,6 +909,8 @@ static const struct sirfsoc_pin_group sirfsoc_pin_groups[] = {
 	SIRFSOC_PIN_GROUP("sdmmc5grp", sdmmc5_pins),
 	SIRFSOC_PIN_GROUP("usb0_upli_drvbusgrp", usb0_upli_drvbus_pins),
 	SIRFSOC_PIN_GROUP("usb1_utmi_drvbusgrp", usb1_utmi_drvbus_pins),
+	SIRFSOC_PIN_GROUP("usb1_dp_dngrp", usb1_dp_dn_pins),
+	SIRFSOC_PIN_GROUP("uart1_route_io_usb1grp", uart1_route_io_usb1_pins),
 	SIRFSOC_PIN_GROUP("pulse_countgrp", pulse_count_pins),
 	SIRFSOC_PIN_GROUP("i2sgrp", i2s_pins),
 	SIRFSOC_PIN_GROUP("i2s_no_dingrp", i2s_no_din_pins),
@@ -903,6 +955,8 @@ static const char * const sdmmc5grp[] = { "sdmmc5grp" };
 static const char * const sdmmc2_nowpgrp[] = { "sdmmc2_nowpgrp" };
 static const char * const usb0_upli_drvbusgrp[] = { "usb0_upli_drvbusgrp" };
 static const char * const usb1_utmi_drvbusgrp[] = { "usb1_utmi_drvbusgrp" };
+static const char * const usb1_dp_dngrp[] = { "usb1_dp_dngrp" };
+static const char * const uart1_route_io_usb1grp[] = { "uart1_route_io_usb1grp" };
 static const char * const pulse_countgrp[] = { "pulse_countgrp" };
 static const char * const i2sgrp[] = { "i2sgrp" };
 static const char * const i2s_no_dingrp[] = { "i2s_no_dingrp" };
@@ -949,6 +1003,8 @@ static const struct sirfsoc_pmx_func sirfsoc_pmx_functions[] = {
 	SIRFSOC_PMX_FUNCTION("sdmmc2_nowp", sdmmc2_nowpgrp, sdmmc2_nowp_padmux),
 	SIRFSOC_PMX_FUNCTION("usb0_upli_drvbus", usb0_upli_drvbusgrp, usb0_upli_drvbus_padmux),
 	SIRFSOC_PMX_FUNCTION("usb1_utmi_drvbus", usb1_utmi_drvbusgrp, usb1_utmi_drvbus_padmux),
+	SIRFSOC_PMX_FUNCTION("usb1_dp_dn", usb1_dp_dngrp, usb1_dp_dn_padmux),
+	SIRFSOC_PMX_FUNCTION("uart1_route_io_usb1", uart1_route_io_usb1grp, uart1_route_io_usb1_padmux),
 	SIRFSOC_PMX_FUNCTION("pulse_count", pulse_countgrp, pulse_count_padmux),
 	SIRFSOC_PMX_FUNCTION("i2s", i2sgrp, i2s_padmux),
 	SIRFSOC_PMX_FUNCTION("i2s_no_din", i2s_no_dingrp, i2s_no_din_padmux),
diff --git a/drivers/pinctrl/sirf/pinctrl-prima2.c b/drivers/pinctrl/sirf/pinctrl-prima2.c
index 241d83992692..050777be0f1e 100644
--- a/drivers/pinctrl/sirf/pinctrl-prima2.c
+++ b/drivers/pinctrl/sirf/pinctrl-prima2.c
@@ -126,6 +126,9 @@ static const struct pinctrl_pin_desc sirfsoc_pads[] = {
 	PINCTRL_PIN(112, "x_ldd[13]"),
 	PINCTRL_PIN(113, "x_ldd[14]"),
 	PINCTRL_PIN(114, "x_ldd[15]"),
+
+	PINCTRL_PIN(115, "x_usb1_dp"),
+	PINCTRL_PIN(116, "x_usb1_dn"),
 };
 
 static const struct sirfsoc_muxmask lcd_16bits_sirfsoc_muxmask[] = {
@@ -143,6 +146,7 @@ static const struct sirfsoc_muxmask lcd_16bits_sirfsoc_muxmask[] = {
 static const struct sirfsoc_padmux lcd_16bits_padmux = {
 	.muxmask_counts = ARRAY_SIZE(lcd_16bits_sirfsoc_muxmask),
 	.muxmask = lcd_16bits_sirfsoc_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(4),
 	.funcval = 0,
 };
@@ -168,6 +172,7 @@ static const struct sirfsoc_muxmask lcd_18bits_muxmask[] = {
 static const struct sirfsoc_padmux lcd_18bits_padmux = {
 	.muxmask_counts = ARRAY_SIZE(lcd_18bits_muxmask),
 	.muxmask = lcd_18bits_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(4),
 	.funcval = 0,
 };
@@ -193,6 +198,7 @@ static const struct sirfsoc_muxmask lcd_24bits_muxmask[] = {
 static const struct sirfsoc_padmux lcd_24bits_padmux = {
 	.muxmask_counts = ARRAY_SIZE(lcd_24bits_muxmask),
 	.muxmask = lcd_24bits_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(4),
 	.funcval = 0,
 };
@@ -218,6 +224,7 @@ static const struct sirfsoc_muxmask lcdrom_muxmask[] = {
 static const struct sirfsoc_padmux lcdrom_padmux = {
 	.muxmask_counts = ARRAY_SIZE(lcdrom_muxmask),
 	.muxmask = lcdrom_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(4),
 	.funcval = BIT(4),
 };
@@ -238,6 +245,7 @@ static const struct sirfsoc_muxmask uart0_muxmask[] = {
 static const struct sirfsoc_padmux uart0_padmux = {
 	.muxmask_counts = ARRAY_SIZE(uart0_muxmask),
 	.muxmask = uart0_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(9),
 	.funcval = BIT(9),
 };
@@ -282,6 +290,7 @@ static const struct sirfsoc_muxmask uart2_muxmask[] = {
 static const struct sirfsoc_padmux uart2_padmux = {
 	.muxmask_counts = ARRAY_SIZE(uart2_muxmask),
 	.muxmask = uart2_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(10),
 	.funcval = BIT(10),
 };
@@ -315,6 +324,7 @@ static const struct sirfsoc_muxmask sdmmc3_muxmask[] = {
 static const struct sirfsoc_padmux sdmmc3_padmux = {
 	.muxmask_counts = ARRAY_SIZE(sdmmc3_muxmask),
 	.muxmask = sdmmc3_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(7),
 	.funcval = 0,
 };
@@ -331,6 +341,7 @@ static const struct sirfsoc_muxmask spi0_muxmask[] = {
 static const struct sirfsoc_padmux spi0_padmux = {
 	.muxmask_counts = ARRAY_SIZE(spi0_muxmask),
 	.muxmask = spi0_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(7),
 	.funcval = BIT(7),
 };
@@ -361,6 +372,7 @@ static const struct sirfsoc_muxmask cko1_muxmask[] = {
 static const struct sirfsoc_padmux cko1_padmux = {
 	.muxmask_counts = ARRAY_SIZE(cko1_muxmask),
 	.muxmask = cko1_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(3),
 	.funcval = 0,
 };
@@ -379,6 +391,7 @@ static const struct sirfsoc_muxmask i2s_muxmask[] = {
 static const struct sirfsoc_padmux i2s_padmux = {
 	.muxmask_counts = ARRAY_SIZE(i2s_muxmask),
 	.muxmask = i2s_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(3) | BIT(9),
 	.funcval = BIT(3),
 };
@@ -395,6 +408,7 @@ static const struct sirfsoc_muxmask ac97_muxmask[] = {
 static const struct sirfsoc_padmux ac97_padmux = {
 	.muxmask_counts = ARRAY_SIZE(ac97_muxmask),
 	.muxmask = ac97_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(8),
 	.funcval = 0,
 };
@@ -411,6 +425,7 @@ static const struct sirfsoc_muxmask spi1_muxmask[] = {
 static const struct sirfsoc_padmux spi1_padmux = {
 	.muxmask_counts = ARRAY_SIZE(spi1_muxmask),
 	.muxmask = spi1_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(8),
 	.funcval = BIT(8),
 };
@@ -441,6 +456,7 @@ static const struct sirfsoc_muxmask gps_muxmask[] = {
 static const struct sirfsoc_padmux gps_padmux = {
 	.muxmask_counts = ARRAY_SIZE(gps_muxmask),
 	.muxmask = gps_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(12) | BIT(13) | BIT(14),
 	.funcval = BIT(12),
 };
@@ -463,6 +479,7 @@ static const struct sirfsoc_muxmask sdmmc5_muxmask[] = {
 static const struct sirfsoc_padmux sdmmc5_padmux = {
 	.muxmask_counts = ARRAY_SIZE(sdmmc5_muxmask),
 	.muxmask = sdmmc5_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(13) | BIT(14),
 	.funcval = BIT(13) | BIT(14),
 };
@@ -479,6 +496,7 @@ static const struct sirfsoc_muxmask usp0_muxmask[] = {
 static const struct sirfsoc_padmux usp0_padmux = {
 	.muxmask_counts = ARRAY_SIZE(usp0_muxmask),
 	.muxmask = usp0_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(1) | BIT(2) | BIT(6) | BIT(9),
 	.funcval = 0,
 };
@@ -509,6 +527,7 @@ static const struct sirfsoc_muxmask usp1_muxmask[] = {
 static const struct sirfsoc_padmux usp1_padmux = {
 	.muxmask_counts = ARRAY_SIZE(usp1_muxmask),
 	.muxmask = usp1_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(1) | BIT(9) | BIT(10) | BIT(11),
 	.funcval = 0,
 };
@@ -542,6 +561,7 @@ static const struct sirfsoc_muxmask usp2_muxmask[] = {
 static const struct sirfsoc_padmux usp2_padmux = {
 	.muxmask_counts = ARRAY_SIZE(usp2_muxmask),
 	.muxmask = usp2_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(13) | BIT(14),
 	.funcval = 0,
 };
@@ -572,6 +592,7 @@ static const struct sirfsoc_muxmask nand_muxmask[] = {
 static const struct sirfsoc_padmux nand_padmux = {
 	.muxmask_counts = ARRAY_SIZE(nand_muxmask),
 	.muxmask = nand_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(5),
 	.funcval = 0,
 };
@@ -580,6 +601,7 @@ static const unsigned nand_pins[] = { 64, 65, 92, 93, 94 };
 
 static const struct sirfsoc_padmux sdmmc0_padmux = {
 	.muxmask_counts = 0,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(5),
 	.funcval = 0,
 };
@@ -596,6 +618,7 @@ static const struct sirfsoc_muxmask sdmmc2_muxmask[] = {
 static const struct sirfsoc_padmux sdmmc2_padmux = {
 	.muxmask_counts = ARRAY_SIZE(sdmmc2_muxmask),
 	.muxmask = sdmmc2_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(5),
 	.funcval = BIT(5),
 };
@@ -628,6 +651,7 @@ static const struct sirfsoc_muxmask vip_muxmask[] = {
 static const struct sirfsoc_padmux vip_padmux = {
 	.muxmask_counts = ARRAY_SIZE(vip_muxmask),
 	.muxmask = vip_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(0),
 	.funcval = 0,
 };
@@ -677,6 +701,7 @@ static const struct sirfsoc_muxmask viprom_muxmask[] = {
 static const struct sirfsoc_padmux viprom_padmux = {
 	.muxmask_counts = ARRAY_SIZE(viprom_muxmask),
 	.muxmask = viprom_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(0),
 	.funcval = BIT(0),
 };
@@ -693,6 +718,7 @@ static const struct sirfsoc_muxmask pwm0_muxmask[] = {
 static const struct sirfsoc_padmux pwm0_padmux = {
 	.muxmask_counts = ARRAY_SIZE(pwm0_muxmask),
 	.muxmask = pwm0_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(12),
 	.funcval = 0,
 };
@@ -764,6 +790,7 @@ static const struct sirfsoc_muxmask usb0_utmi_drvbus_muxmask[] = {
 static const struct sirfsoc_padmux usb0_utmi_drvbus_padmux = {
 	.muxmask_counts = ARRAY_SIZE(usb0_utmi_drvbus_muxmask),
 	.muxmask = usb0_utmi_drvbus_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(6),
 	.funcval = BIT(6), /* refer to PAD_UTMI_DRVVBUS0_ENABLE */
 };
@@ -780,12 +807,31 @@ static const struct sirfsoc_muxmask usb1_utmi_drvbus_muxmask[] = {
 static const struct sirfsoc_padmux usb1_utmi_drvbus_padmux = {
 	.muxmask_counts = ARRAY_SIZE(usb1_utmi_drvbus_muxmask),
 	.muxmask = usb1_utmi_drvbus_muxmask,
+	.ctrlreg = SIRFSOC_RSC_PIN_MUX,
 	.funcmask = BIT(11),
 	.funcval = BIT(11), /* refer to PAD_UTMI_DRVVBUS1_ENABLE */
 };
 
 static const unsigned usb1_utmi_drvbus_pins[] = { 59 };
 
+static const struct sirfsoc_padmux usb1_dp_dn_padmux = {
+	.muxmask_counts = 0,
+	.ctrlreg = SIRFSOC_RSC_USB_UART_SHARE,
+	.funcmask = BIT(2),
+	.funcval = BIT(2),
+};
+
+static const unsigned usb1_dp_dn_pins[] = { 115, 116 };
+
+static const struct sirfsoc_padmux uart1_route_io_usb1_padmux = {
+	.muxmask_counts = 0,
+	.ctrlreg = SIRFSOC_RSC_USB_UART_SHARE,
+	.funcmask = BIT(2),
+	.funcval = 0,
+};
+
+static const unsigned uart1_route_io_usb1_pins[] = { 115, 116 };
+
 static const struct sirfsoc_muxmask pulse_count_muxmask[] = {
 	{
 		.group = 0,
@@ -838,6 +884,8 @@ static const struct sirfsoc_pin_group sirfsoc_pin_groups[] = {
 	SIRFSOC_PIN_GROUP("sdmmc5grp", sdmmc5_pins),
 	SIRFSOC_PIN_GROUP("usb0_utmi_drvbusgrp", usb0_utmi_drvbus_pins),
 	SIRFSOC_PIN_GROUP("usb1_utmi_drvbusgrp", usb1_utmi_drvbus_pins),
+	SIRFSOC_PIN_GROUP("usb1_dp_dngrp", usb1_dp_dn_pins),
+	SIRFSOC_PIN_GROUP("uart1_route_io_usb1grp", uart1_route_io_usb1_pins),
 	SIRFSOC_PIN_GROUP("pulse_countgrp", pulse_count_pins),
 	SIRFSOC_PIN_GROUP("i2sgrp", i2s_pins),
 	SIRFSOC_PIN_GROUP("ac97grp", ac97_pins),
@@ -884,6 +932,8 @@ static const char * const sdmmc4grp[] = { "sdmmc4grp" };
 static const char * const sdmmc5grp[] = { "sdmmc5grp" };
 static const char * const usb0_utmi_drvbusgrp[] = { "usb0_utmi_drvbusgrp" };
 static const char * const usb1_utmi_drvbusgrp[] = { "usb1_utmi_drvbusgrp" };
+static const char * const usb1_dp_dngrp[] = { "usb1_dp_dngrp" };
+static const char * const uart1_route_io_usb1grp[] = { "uart1_route_io_usb1grp" };
 static const char * const pulse_countgrp[] = { "pulse_countgrp" };
 static const char * const i2sgrp[] = { "i2sgrp" };
 static const char * const ac97grp[] = { "ac97grp" };
@@ -930,6 +980,8 @@ static const struct sirfsoc_pmx_func sirfsoc_pmx_functions[] = {
 	SIRFSOC_PMX_FUNCTION("sdmmc5", sdmmc5grp, sdmmc5_padmux),
 	SIRFSOC_PMX_FUNCTION("usb0_utmi_drvbus", usb0_utmi_drvbusgrp, usb0_utmi_drvbus_padmux),
 	SIRFSOC_PMX_FUNCTION("usb1_utmi_drvbus", usb1_utmi_drvbusgrp, usb1_utmi_drvbus_padmux),
+	SIRFSOC_PMX_FUNCTION("usb1_dp_dn", usb1_dp_dngrp, usb1_dp_dn_padmux),
+	SIRFSOC_PMX_FUNCTION("uart1_route_io_usb1", uart1_route_io_usb1grp, uart1_route_io_usb1_padmux),
 	SIRFSOC_PMX_FUNCTION("pulse_count", pulse_countgrp, pulse_count_padmux),
 	SIRFSOC_PMX_FUNCTION("i2s", i2sgrp, i2s_padmux),
 	SIRFSOC_PMX_FUNCTION("ac97", ac97grp, ac97_padmux),
diff --git a/drivers/pinctrl/sirf/pinctrl-sirf.c b/drivers/pinctrl/sirf/pinctrl-sirf.c
index 26f946af7933..b81e388c50de 100644
--- a/drivers/pinctrl/sirf/pinctrl-sirf.c
+++ b/drivers/pinctrl/sirf/pinctrl-sirf.c
@@ -166,12 +166,12 @@ static void sirfsoc_pinmux_endisable(struct sirfsoc_pmx *spmx, unsigned selector
 
 	if (mux->funcmask && enable) {
 		u32 func_en_val;
+
 		func_en_val =
-			readl(spmx->rsc_virtbase + SIRFSOC_RSC_PIN_MUX);
+			readl(spmx->rsc_virtbase + mux->ctrlreg);
 		func_en_val =
-			(func_en_val & ~mux->funcmask) | (mux->
-				funcval);
-		writel(func_en_val, spmx->rsc_virtbase + SIRFSOC_RSC_PIN_MUX);
+			(func_en_val & ~mux->funcmask) | (mux->funcval);
+		writel(func_en_val, spmx->rsc_virtbase + mux->ctrlreg);
 	}
 }
 
diff --git a/drivers/pinctrl/sirf/pinctrl-sirf.h b/drivers/pinctrl/sirf/pinctrl-sirf.h
index 17cc108510ba..d7f16b499ad9 100644
--- a/drivers/pinctrl/sirf/pinctrl-sirf.h
+++ b/drivers/pinctrl/sirf/pinctrl-sirf.h
@@ -9,8 +9,9 @@
 #ifndef __PINMUX_SIRF_H__
 #define __PINMUX_SIRF_H__
 
-#define SIRFSOC_NUM_PADS    622
-#define SIRFSOC_RSC_PIN_MUX 0x4
+#define SIRFSOC_NUM_PADS		622
+#define SIRFSOC_RSC_USB_UART_SHARE	0
+#define SIRFSOC_RSC_PIN_MUX		0x4
 
 #define SIRFSOC_GPIO_PAD_EN(g)		((g)*0x100 + 0x84)
 #define SIRFSOC_GPIO_PAD_EN_CLR(g)	((g)*0x100 + 0x90)
@@ -61,6 +62,7 @@ struct sirfsoc_padmux {
 	unsigned long muxmask_counts;
 	const struct sirfsoc_muxmask *muxmask;
 	/* RSC_PIN_MUX set */
+	unsigned long ctrlreg;
 	unsigned long funcmask;
 	unsigned long funcval;
 };
-- 
cgit v1.2.3


From 49449c30c4d1514486364d1e0dbea6938914b86f Mon Sep 17 00:00:00 2001
From: Geyslan G. Bem
Date: Mon, 7 Oct 2013 19:16:59 -0300
Subject: x86: mkpiggy.c: Explicitly close the output file

Even though the resource is released when the application is closed or
when returned from main function, modify the code to make it obvious,
and to keep static analysis tools from complaining.

Signed-off-by: Geyslan G. Bem <geyslan@gmail.com>
Link: http://lkml.kernel.org/r/1381184219-10985-1-git-send-email-geyslan@gmail.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/boot/compressed/mkpiggy.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/compressed/mkpiggy.c b/arch/x86/boot/compressed/mkpiggy.c
index 958a641483dd..b669ab65bf6c 100644
--- a/arch/x86/boot/compressed/mkpiggy.c
+++ b/arch/x86/boot/compressed/mkpiggy.c
@@ -36,11 +36,12 @@ int main(int argc, char *argv[])
 	uint32_t olen;
 	long ilen;
 	unsigned long offs;
-	FILE *f;
+	FILE *f = NULL;
+	int retval = 1;
 
 	if (argc < 2) {
 		fprintf(stderr, "Usage: %s compressed_file\n", argv[0]);
-		return 1;
+		goto bail;
 	}
 
 	/* Get the information for the compressed kernel image first */
@@ -48,7 +49,7 @@ int main(int argc, char *argv[])
 	f = fopen(argv[1], "r");
 	if (!f) {
 		perror(argv[1]);
-		return 1;
+		goto bail;
 	}
 
 
@@ -58,12 +59,11 @@ int main(int argc, char *argv[])
 
 	if (fread(&olen, sizeof(olen), 1, f) != 1) {
 		perror(argv[1]);
-		return 1;
+		goto bail;
 	}
 
 	ilen = ftell(f);
 	olen = get_unaligned_le32(&olen);
-	fclose(f);
 
 	/*
 	 * Now we have the input (compressed) and output (uncompressed)
@@ -91,5 +91,9 @@ int main(int argc, char *argv[])
 	printf(".incbin \"%s\"\n", argv[1]);
 	printf("input_data_end:\n");
 
-	return 0;
+	retval = 0;
+bail:
+	if (f)
+		fclose(f);
+	return retval;
 }
-- 
cgit v1.2.3


From 122498738417c73943b71294c60ec34fc110f5d6 Mon Sep 17 00:00:00 2001
From: Andre Richter
Date: Tue, 8 Oct 2013 11:22:22 +0200
Subject: x86, msr: Use file_inode(), not f_mapping->host

As discussed in [1], exchange f_mapping->host with file_inode().  This
is a bug, but happens to be non-manifest in this case.

[1] http://lkml.kernel.org/r/20131007190357.GA13318@ZenIV.linux.org.uk

Signed-off-by: Andre Richter <andre.o.richter@gmail.com>
Link: http://lkml.kernel.org/r/1381224142-3267-1-git-send-email-andre.o.richter@gmail.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/msr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 88458faea2f8..05266b5aae22 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -46,7 +46,7 @@ static struct class *msr_class;
 static loff_t msr_seek(struct file *file, loff_t offset, int orig)
 {
 	loff_t ret;
-	struct inode *inode = file->f_mapping->host;
+	struct inode *inode = file_inode(file);
 
 	mutex_lock(&inode->i_mutex);
 	switch (orig) {
-- 
cgit v1.2.3


From 312717f15ac7095c3ea98d487276781535ca7c0b Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Sun, 25 Aug 2013 18:29:51 -0500
Subject: c6x: use boot_command_line instead of private c6x_command_line

Save some pointless copying of the kernel command line and just use
boot_command_line instead.

Also remove default_command_line as it is not referenced anywhere, and
the DT code already handles the default command line.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Tested-by: Mark Salter <msalter@redhat.com>
Acked-by: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: linux-c6x-dev@linux-c6x.org
Reviewed-by: Grant Likely <grant.likely@linaro.org>
---
 arch/c6x/include/asm/setup.h  |  2 --
 arch/c6x/kernel/devicetree.c  |  2 +-
 arch/c6x/kernel/setup.c       | 11 +----------
 arch/c6x/kernel/vmlinux.lds.S |  6 ------
 4 files changed, 2 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/c6x/include/asm/setup.h b/arch/c6x/include/asm/setup.h
index ecead15872a6..696804475f55 100644
--- a/arch/c6x/include/asm/setup.h
+++ b/arch/c6x/include/asm/setup.h
@@ -14,8 +14,6 @@
 #include <uapi/asm/setup.h>
 
 #ifndef __ASSEMBLY__
-extern char c6x_command_line[COMMAND_LINE_SIZE];
-
 extern int c6x_add_memory(phys_addr_t start, unsigned long size);
 
 extern unsigned long ram_start;
diff --git a/arch/c6x/kernel/devicetree.c b/arch/c6x/kernel/devicetree.c
index 9e15ab9199b2..5e8c838c1dde 100644
--- a/arch/c6x/kernel/devicetree.c
+++ b/arch/c6x/kernel/devicetree.c
@@ -24,7 +24,7 @@ void __init early_init_devtree(void *params)
 	 * device-tree, including the platform type, initrd location and
 	 * size and more ...
 	 */
-	of_scan_flat_dt(early_init_dt_scan_chosen, c6x_command_line);
+	of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
 
 	/* Scan memory nodes and rebuild MEMBLOCKs */
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
diff --git a/arch/c6x/kernel/setup.c b/arch/c6x/kernel/setup.c
index f4e72bd8c103..0e5a812907d9 100644
--- a/arch/c6x/kernel/setup.c
+++ b/arch/c6x/kernel/setup.c
@@ -68,13 +68,6 @@ unsigned long ram_end;
 static unsigned long dma_start __initdata;
 static unsigned long dma_size __initdata;
 
-char c6x_command_line[COMMAND_LINE_SIZE];
-
-#if defined(CONFIG_CMDLINE_BOOL)
-static const char default_command_line[COMMAND_LINE_SIZE] __section(.cmdline) =
-	CONFIG_CMDLINE;
-#endif
-
 struct cpuinfo_c6x {
 	const char *cpu_name;
 	const char *cpu_voltage;
@@ -296,8 +289,6 @@ notrace void __init machine_init(unsigned long dt_ptr)
 	/* Do some early initialization based on the flat device tree */
 	early_init_devtree(fdt);
 
-	/* parse_early_param needs a boot_command_line */
-	strlcpy(boot_command_line, c6x_command_line, COMMAND_LINE_SIZE);
 	parse_early_param();
 }
 
@@ -309,7 +300,7 @@ void __init setup_arch(char **cmdline_p)
 	printk(KERN_INFO "Initializing kernel\n");
 
 	/* Initialize command line */
-	*cmdline_p = c6x_command_line;
+	*cmdline_p = boot_command_line;
 
 	memory_end = ram_end;
 	memory_end &= ~(PAGE_SIZE - 1);
diff --git a/arch/c6x/kernel/vmlinux.lds.S b/arch/c6x/kernel/vmlinux.lds.S
index 279d80725128..5a6e141d1641 100644
--- a/arch/c6x/kernel/vmlinux.lds.S
+++ b/arch/c6x/kernel/vmlinux.lds.S
@@ -37,12 +37,6 @@ SECTIONS
 		_vectors_end = .;
 	}
 
-	. = ALIGN(0x1000);
-	.cmdline :
-	{
-		*(.cmdline)
-	}
-
 	/*
 	 * This section contains data which may be shared with other
 	 * cores. It needs to be a fixed offset from PAGE_OFFSET
-- 
cgit v1.2.3


From bbf28b505ac2dd923b9051ca5031cf87bf7c40cc Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Mon, 26 Aug 2013 11:28:50 -0500
Subject: openrisc: use boot_command_line instead of private cmd_line

Save some pointless copying of the kernel command line and just use
boot_command_line instead. The DT code already handles CONFIG_CMDLINE,
so a separate copy is not needed.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: linux@lists.openrisc.net
Reviewed-by: Grant Likely <grant.likely@linaro.org>
---
 arch/openrisc/kernel/prom.c  | 7 +------
 arch/openrisc/kernel/setup.c | 4 +---
 2 files changed, 2 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/openrisc/kernel/prom.c b/arch/openrisc/kernel/prom.c
index a63e76872f84..bf3fd05703c3 100644
--- a/arch/openrisc/kernel/prom.c
+++ b/arch/openrisc/kernel/prom.c
@@ -47,8 +47,6 @@
 #include <asm/sections.h>
 #include <asm/setup.h>
 
-extern char cmd_line[COMMAND_LINE_SIZE];
-
 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 {
 	size &= PAGE_MASK;
@@ -67,15 +65,12 @@ void __init early_init_devtree(void *params)
 	 * device-tree, including the platform type, initrd location and
 	 * size, TCE reserve, and more ...
 	 */
-	of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line);
+	of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
 
 	/* Scan memory nodes and rebuild MEMBLOCKs */
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
 	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
 
-	/* Save command line for /proc/cmdline and then parse parameters */
-	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
-
 	memblock_allow_resize();
 
 	/* We must copy the flattend device tree from init memory to regular
diff --git a/arch/openrisc/kernel/setup.c b/arch/openrisc/kernel/setup.c
index d7359ffbcbdd..719c5c8895c4 100644
--- a/arch/openrisc/kernel/setup.c
+++ b/arch/openrisc/kernel/setup.c
@@ -50,8 +50,6 @@
 
 #include "vmlinux.h"
 
-char __initdata cmd_line[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
-
 static unsigned long __init setup_memory(void)
 {
 	unsigned long bootmap_size;
@@ -316,7 +314,7 @@ void __init setup_arch(char **cmdline_p)
 		conswitchp = &dummy_con;
 #endif
 
-	*cmdline_p = cmd_line;
+	*cmdline_p = boot_command_line;
 
 	printk(KERN_INFO "OpenRISC Linux -- http://openrisc.net\n");
 }
-- 
cgit v1.2.3


From 1efc959e0b28942d69d3084ecd4e9bde3beb9866 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Mon, 26 Aug 2013 11:23:27 -0500
Subject: arc: use unflatten_and_copy_device_tree

Use the common unflatten_and_copy_device_tree to copy the built-in FDT
out of init section.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
---
 arch/arc/include/asm/mach_desc.h |  1 -
 arch/arc/kernel/devtree.c        | 15 ---------------
 arch/arc/kernel/setup.c          |  3 +--
 3 files changed, 1 insertion(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/arc/include/asm/mach_desc.h b/arch/arc/include/asm/mach_desc.h
index 9998dc846ebb..d3e9c0a05be8 100644
--- a/arch/arc/include/asm/mach_desc.h
+++ b/arch/arc/include/asm/mach_desc.h
@@ -82,6 +82,5 @@ __attribute__((__section__(".arch.info.init"))) = {	\
 };
 
 extern struct machine_desc *setup_machine_fdt(void *dt);
-extern void __init copy_devtree(void);
 
 #endif
diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c
index 2340af0e1d6f..eeb613aa44ff 100644
--- a/arch/arc/kernel/devtree.c
+++ b/arch/arc/kernel/devtree.c
@@ -100,18 +100,3 @@ struct machine_desc * __init setup_machine_fdt(void *dt)
 
 	return mdesc_best;
 }
-
-/*
- * Copy the flattened DT out of .init since unflattening doesn't copy strings
- * and the normal DT APIs refs them from orig flat DT
- */
-void __init copy_devtree(void)
-{
-	void *alloc = early_init_dt_alloc_memory_arch(
-			be32_to_cpu(initial_boot_params->totalsize), 64);
-	if (alloc) {
-		memcpy(alloc, initial_boot_params,
-				be32_to_cpu(initial_boot_params->totalsize));
-		initial_boot_params = alloc;
-	}
-}
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 2c68bc7e6a78..710bf895dc2c 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -346,8 +346,7 @@ void __init setup_arch(char **cmdline_p)
 	setup_arch_memory();
 
 	/* copy flat DT out of .init and then unflatten it */
-	copy_devtree();
-	unflatten_device_tree();
+	unflatten_and_copy_device_tree();
 
 	/* Can be issue if someone passes cmd line arg "ro"
 	 * But that is unlikely so keeping it as it is
-- 
cgit v1.2.3


From 3486892f998fea5b4f1a0a4d093f09b7d0024696 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Mon, 26 Aug 2013 11:23:50 -0500
Subject: openrisc: use unflatten_and_copy_device_tree

Use the common unflatten_and_copy_device_tree to copy the built-in FDT
out of init section. This moves the copy later in the boot, but there
do not appear to be any references to strings in the FDT before the copy.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: linux@lists.openrisc.net
---
 arch/openrisc/kernel/prom.c  | 13 -------------
 arch/openrisc/kernel/setup.c |  2 +-
 2 files changed, 1 insertion(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/openrisc/kernel/prom.c b/arch/openrisc/kernel/prom.c
index bf3fd05703c3..3b94972e52b2 100644
--- a/arch/openrisc/kernel/prom.c
+++ b/arch/openrisc/kernel/prom.c
@@ -55,8 +55,6 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 
 void __init early_init_devtree(void *params)
 {
-	void *alloc;
-
 	/* Setup flat device-tree pointer */
 	initial_boot_params = params;
 
@@ -72,17 +70,6 @@ void __init early_init_devtree(void *params)
 	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
 
 	memblock_allow_resize();
-
-	/* We must copy the flattend device tree from init memory to regular
-	 * memory because the device tree references the strings in it
-	 * directly.
-	 */
-
-	alloc = __va(memblock_alloc(initial_boot_params->totalsize, PAGE_SIZE));
-
-	memcpy(alloc, initial_boot_params, initial_boot_params->totalsize);
-
-	initial_boot_params = alloc;
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
diff --git a/arch/openrisc/kernel/setup.c b/arch/openrisc/kernel/setup.c
index 719c5c8895c4..09a769b69572 100644
--- a/arch/openrisc/kernel/setup.c
+++ b/arch/openrisc/kernel/setup.c
@@ -283,7 +283,7 @@ void __init setup_arch(char **cmdline_p)
 {
 	unsigned long max_low_pfn;
 
-	unflatten_device_tree();
+	unflatten_and_copy_device_tree();
 
 	setup_cpuinfo();
 
-- 
cgit v1.2.3


From 21c561bda17a67afe923866cf88653637abf6e7a Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Wed, 28 Aug 2013 09:57:57 -0500
Subject: x86: use unflatten_and_copy_device_tree

Use the common unflatten_and_copy_device_tree to copy the built-in FDT
out of init section.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
---
 arch/x86/kernel/devicetree.c | 23 ++++++++---------------
 1 file changed, 8 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 376dc7873447..0db805c4b9e8 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -230,7 +230,7 @@ static void __init dtb_apic_setup(void)
 static void __init x86_flattree_get_config(void)
 {
 	u32 size, map_len;
-	void *new_dtb;
+	struct boot_param_header *dt;
 
 	if (!initial_dtb)
 		return;
@@ -238,24 +238,17 @@ static void __init x86_flattree_get_config(void)
 	map_len = max(PAGE_SIZE - (initial_dtb & ~PAGE_MASK),
 			(u64)sizeof(struct boot_param_header));
 
-	initial_boot_params = early_memremap(initial_dtb, map_len);
-	size = be32_to_cpu(initial_boot_params->totalsize);
+	dt = early_memremap(initial_dtb, map_len);
+	size = be32_to_cpu(dt->totalsize);
 	if (map_len < size) {
-		early_iounmap(initial_boot_params, map_len);
-		initial_boot_params = early_memremap(initial_dtb, size);
+		early_iounmap(dt, map_len);
+		dt = early_memremap(initial_dtb, size);
 		map_len = size;
 	}
 
-	new_dtb = alloc_bootmem(size);
-	memcpy(new_dtb, initial_boot_params, size);
-	early_iounmap(initial_boot_params, map_len);
-
-	initial_boot_params = new_dtb;
-
-	/* root level address cells */
-	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-
-	unflatten_device_tree();
+	initial_boot_params = dt;
+	unflatten_and_copy_device_tree();
+	early_iounmap(dt, map_len);
 }
 #else
 static inline void x86_flattree_get_config(void) { }
-- 
cgit v1.2.3


From 3104021c12747df63843fedf3ceb6a54410e2c18 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Mon, 26 Aug 2013 11:24:11 -0500
Subject: xtensa: use unflatten_and_copy_device_tree

Use the common unflatten_and_copy_device_tree to copy the built-in FDT
out of init section.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-xtensa@linux-xtensa.org
Acked-by: Grant Likely <grant.likely@linaro.org>
---
 arch/xtensa/kernel/setup.c | 19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 946fb8d06c8b..fc31ec1e977d 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -21,11 +21,8 @@
 #include <linux/screen_info.h>
 #include <linux/bootmem.h>
 #include <linux/kernel.h>
-
-#ifdef CONFIG_OF
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
-#endif
 
 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
 # include <linux/console.h>
@@ -252,17 +249,6 @@ void __init early_init_devtree(void *params)
 		of_scan_flat_dt(early_init_dt_scan_memory, NULL);
 }
 
-static void __init copy_devtree(void)
-{
-	void *alloc = early_init_dt_alloc_memory_arch(
-			be32_to_cpu(initial_boot_params->totalsize), 8);
-	if (alloc) {
-		memcpy(alloc, initial_boot_params,
-				be32_to_cpu(initial_boot_params->totalsize));
-		initial_boot_params = alloc;
-	}
-}
-
 static int __init xtensa_device_probe(void)
 {
 	of_platform_populate(NULL, NULL, NULL, NULL);
@@ -525,10 +511,7 @@ void __init setup_arch(char **cmdline_p)
 
 	bootmem_init();
 
-#ifdef CONFIG_OF
-	copy_devtree();
-	unflatten_device_tree();
-#endif
+	unflatten_and_copy_device_tree();
 
 	platform_setup(cmdline_p);
 
-- 
cgit v1.2.3


From 08854f41809293b283b96c642562cd4119d6b5db Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Tue, 27 Aug 2013 21:39:46 -0500
Subject: metag: use unflatten_and_copy_device_tree

Use the common unflatten_and_copy_device_tree to copy the built-in FDT
out of init section.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: James Hogan <james.hogan@imgtec.com>
---
 arch/metag/kernel/devtree.c | 16 ----------------
 arch/metag/kernel/setup.c   |  4 +---
 2 files changed, 1 insertion(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/metag/kernel/devtree.c b/arch/metag/kernel/devtree.c
index 7cd02529636e..049af569cd49 100644
--- a/arch/metag/kernel/devtree.c
+++ b/arch/metag/kernel/devtree.c
@@ -94,21 +94,5 @@ struct machine_desc * __init setup_machine_fdt(void *dt)
 	of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
 
 	return mdesc_best;
-}
 
-/**
- * copy_fdt - Copy device tree into non-init memory.
- *
- * We must copy the flattened device tree blob into non-init memory because the
- * unflattened device tree will reference the strings in it directly.
- */
-void __init copy_fdt(void)
-{
-	void *alloc = early_init_dt_alloc_memory_arch(
-			be32_to_cpu(initial_boot_params->totalsize), 0x40);
-	if (alloc) {
-		memcpy(alloc, initial_boot_params,
-		       be32_to_cpu(initial_boot_params->totalsize));
-		initial_boot_params = alloc;
-	}
 }
diff --git a/arch/metag/kernel/setup.c b/arch/metag/kernel/setup.c
index c396cd0b425f..2c697d343088 100644
--- a/arch/metag/kernel/setup.c
+++ b/arch/metag/kernel/setup.c
@@ -408,9 +408,7 @@ void __init setup_arch(char **cmdline_p)
 	cpu_2_hwthread_id[smp_processor_id()] = hard_processor_id();
 	hwthread_id_2_cpu[hard_processor_id()] = smp_processor_id();
 
-	/* Copy device tree blob into non-init memory before unflattening */
-	copy_fdt();
-	unflatten_device_tree();
+	unflatten_and_copy_device_tree();
 
 #ifdef CONFIG_SMP
 	smp_init_cpus();
-- 
cgit v1.2.3


From ad81fcb53033be98ab29c6cfb6ef0249a8e2ffaa Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Mon, 26 Aug 2013 10:12:22 -0500
Subject: arc: use early_init_dt_scan

Convert arc to use new early_init_dt_scan function.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
---
 arch/arc/kernel/devtree.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c
index eeb613aa44ff..1ab6f3569f60 100644
--- a/arch/arc/kernel/devtree.c
+++ b/arch/arc/kernel/devtree.c
@@ -27,7 +27,6 @@
  */
 struct machine_desc * __init setup_machine_fdt(void *dt)
 {
-	struct boot_param_header *devtree = dt;
 	struct machine_desc *mdesc = NULL, *mdesc_best = NULL;
 	unsigned int score, mdesc_score = ~1;
 	unsigned long dt_root;
@@ -36,11 +35,9 @@ struct machine_desc * __init setup_machine_fdt(void *dt)
 	char manufacturer[16];
 	unsigned long len;
 
-	/* check device tree validity */
-	if (be32_to_cpu(devtree->magic) != OF_DT_HEADER)
+	if (!early_init_dt_scan(dt))
 		return NULL;
 
-	initial_boot_params = devtree;
 	dt_root = of_get_flat_dt_root();
 
 	/*
@@ -85,15 +82,6 @@ struct machine_desc * __init setup_machine_fdt(void *dt)
 
 	pr_info("Board \"%s\" from %s (Manufacturer)\n", model, manufacturer);
 
-	/* Retrieve various information from the /chosen node */
-	of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
-
-	/* Initialize {size,address}-cells info */
-	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-
-	/* Setup memory, calling early_init_dt_add_memory_arch */
-	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
-
 	clk = of_get_flat_dt_prop(dt_root, "clock-frequency", &len);
 	if (clk)
 		arc_set_core_freq(of_read_ulong(clk, len/4));
-- 
cgit v1.2.3


From 56dc1f474add364b07254ad9690f4e244ca65ef4 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Mon, 26 Aug 2013 10:13:01 -0500
Subject: arm: use early_init_dt_scan

Convert arm to use new early_init_dt_scan function.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
---
 arch/arm/kernel/devtree.c | 16 +---------------
 1 file changed, 1 insertion(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index f35906b3d8c9..e7ce175b99e3 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -183,7 +183,6 @@ bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
  */
 const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 {
-	struct boot_param_header *devtree;
 	const struct machine_desc *mdesc, *mdesc_best = NULL;
 	unsigned int score, mdesc_score = ~1;
 	unsigned long dt_root;
@@ -196,17 +195,11 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 	mdesc_best = &__mach_desc_GENERIC_DT;
 #endif
 
-	if (!dt_phys)
+	if (!dt_phys || !early_init_dt_scan(phys_to_virt(dt_phys)))
 		return NULL;
 
-	devtree = phys_to_virt(dt_phys);
-
-	/* check device tree validity */
-	if (be32_to_cpu(devtree->magic) != OF_DT_HEADER)
-		return NULL;
 
 	/* Search the mdescs for the 'best' compatible value match */
-	initial_boot_params = devtree;
 	dt_root = of_get_flat_dt_root();
 	for_each_machine_desc(mdesc) {
 		score = of_flat_dt_match(dt_root, mdesc->dt_compat);
@@ -240,13 +233,6 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 		model = "<unknown>";
 	pr_info("Machine: %s, model: %s\n", mdesc_best->name, model);
 
-	/* Retrieve various information from the /chosen node */
-	of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
-	/* Initialize {size,address}-cells info */
-	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-	/* Setup memory, calling early_init_dt_add_memory_arch */
-	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
-
 	/* Change machine number to match the mdesc we're using */
 	__machine_arch_type = mdesc_best->nr;
 
-- 
cgit v1.2.3


From d5189cc57b1d231b6dc745de6b68881901d0c5c4 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Mon, 26 Aug 2013 10:14:32 -0500
Subject: arm64: use early_init_dt_scan

Convert arm64 to use new early_init_dt_scan function.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
---
 arch/arm64/kernel/setup.c | 31 +++----------------------------
 1 file changed, 3 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 055cfb80e05c..4a5f6243ade2 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -124,37 +124,19 @@ static void __init setup_processor(void)
 
 static void __init setup_machine_fdt(phys_addr_t dt_phys)
 {
-	struct boot_param_header *devtree;
 	unsigned long dt_root;
 
-	/* Check we have a non-NULL DT pointer */
-	if (!dt_phys) {
-		early_print("\n"
-			"Error: NULL or invalid device tree blob\n"
-			"The dtb must be 8-byte aligned and passed in the first 512MB of memory\n"
-			"\nPlease check your bootloader.\n");
-
-		while (true)
-			cpu_relax();
-
-	}
-
-	devtree = phys_to_virt(dt_phys);
-
-	/* Check device tree validity */
-	if (be32_to_cpu(devtree->magic) != OF_DT_HEADER) {
+	if (!dt_phys || !early_init_dt_scan(phys_to_virt(dt_phys))) {
 		early_print("\n"
 			"Error: invalid device tree blob at physical address 0x%p (virtual address 0x%p)\n"
-			"Expected 0x%x, found 0x%x\n"
+			"The dtb must be 8-byte aligned and passed in the first 512MB of memory\n"
 			"\nPlease check your bootloader.\n",
-			dt_phys, devtree, OF_DT_HEADER,
-			be32_to_cpu(devtree->magic));
+			dt_phys, phys_to_virt(dt_phys));
 
 		while (true)
 			cpu_relax();
 	}
 
-	initial_boot_params = devtree;
 	dt_root = of_get_flat_dt_root();
 
 	machine_name = of_get_flat_dt_prop(dt_root, "model", NULL);
@@ -163,13 +145,6 @@ static void __init setup_machine_fdt(phys_addr_t dt_phys)
 	if (!machine_name)
 		machine_name = "<unknown>";
 	pr_info("Machine: %s\n", machine_name);
-
-	/* Retrieve various information from the /chosen node */
-	of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
-	/* Initialize {size,address}-cells info */
-	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-	/* Setup memory, calling early_init_dt_add_memory_arch */
-	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
 }
 
 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
-- 
cgit v1.2.3


From a8e44636c66d90d177fcdf8e8cfc36747074a4ed Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Mon, 26 Aug 2013 10:18:20 -0500
Subject: c6x: use early_init_dt_scan

Convert c6x to use new early_init_dt_scan function.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: linux-c6x-dev@linux-c6x.org
---
 arch/c6x/kernel/devicetree.c | 19 -------------------
 arch/c6x/kernel/setup.c      |  2 +-
 2 files changed, 1 insertion(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/c6x/kernel/devicetree.c b/arch/c6x/kernel/devicetree.c
index 5e8c838c1dde..d28a92fc0c52 100644
--- a/arch/c6x/kernel/devicetree.c
+++ b/arch/c6x/kernel/devicetree.c
@@ -10,28 +10,9 @@
  *
  */
 #include <linux/init.h>
-#include <linux/of.h>
-#include <linux/of_fdt.h>
 #include <linux/initrd.h>
 #include <linux/memblock.h>
 
-void __init early_init_devtree(void *params)
-{
-	/* Setup flat device-tree pointer */
-	initial_boot_params = params;
-
-	/* Retrieve various informations from the /chosen node of the
-	 * device-tree, including the platform type, initrd location and
-	 * size and more ...
-	 */
-	of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
-
-	/* Scan memory nodes and rebuild MEMBLOCKs */
-	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
-}
-
-
 #ifdef CONFIG_BLK_DEV_INITRD
 void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
 {
diff --git a/arch/c6x/kernel/setup.c b/arch/c6x/kernel/setup.c
index 0e5a812907d9..731db4b9014d 100644
--- a/arch/c6x/kernel/setup.c
+++ b/arch/c6x/kernel/setup.c
@@ -287,7 +287,7 @@ notrace void __init machine_init(unsigned long dt_ptr)
 		fdt = dtb;
 
 	/* Do some early initialization based on the flat device tree */
-	early_init_devtree(fdt);
+	early_init_dt_scan(fdt);
 
 	parse_early_param();
 }
-- 
cgit v1.2.3


From e5d659935e8aa4ee8d72b1cce9ad6d6f0213909e Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Wed, 25 Sep 2013 15:46:14 -0500
Subject: metag: use early_init_dt_scan

Convert metag to use new early_init_dt_scan function.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: James Hogan <james.hogan@imgtec.com>
---
 arch/metag/kernel/devtree.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/metag/kernel/devtree.c b/arch/metag/kernel/devtree.c
index 049af569cd49..68c2fee788c8 100644
--- a/arch/metag/kernel/devtree.c
+++ b/arch/metag/kernel/devtree.c
@@ -43,18 +43,16 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
  */
 struct machine_desc * __init setup_machine_fdt(void *dt)
 {
-	struct boot_param_header *devtree = dt;
 	struct machine_desc *mdesc, *mdesc_best = NULL;
 	unsigned int score, mdesc_score = ~1;
 	unsigned long dt_root;
 	const char *model;
 
 	/* check device tree validity */
-	if (be32_to_cpu(devtree->magic) != OF_DT_HEADER)
+	if (!early_init_dt_scan(dt))
 		return NULL;
 
 	/* Search the mdescs for the 'best' compatible value match */
-	initial_boot_params = devtree;
 	dt_root = of_get_flat_dt_root();
 
 	for_each_machine_desc(mdesc) {
@@ -90,9 +88,6 @@ struct machine_desc * __init setup_machine_fdt(void *dt)
 		model = "<unknown>";
 	pr_info("Machine: %s, model: %s\n", mdesc_best->name, model);
 
-	/* Retrieve various information from the /chosen node */
-	of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
-
 	return mdesc_best;
 
 }
-- 
cgit v1.2.3


From dc0b433526773c70a030478212f57c3f402681ae Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Mon, 26 Aug 2013 10:19:07 -0500
Subject: microblaze: use early_init_dt_scan

Convert microblaze to use new early_init_dt_scan function.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Tested-by: Michal Simek <monstr@monstr.eu>
Cc: microblaze-uclinux@itee.uq.edu.au
---
 arch/microblaze/kernel/prom.c  | 17 +++--------------
 arch/microblaze/kernel/setup.c |  2 +-
 2 files changed, 4 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index 0c4453f134cb..e13686ede330 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -106,21 +106,10 @@ void __init early_init_devtree(void *params)
 {
 	pr_debug(" -> early_init_devtree(%p)\n", params);
 
-	/* Setup flat device-tree pointer */
-	initial_boot_params = params;
+	early_init_dt_scan(params);
+	if (!strlen(boot_command_line))
+		strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 
-	/* Retrieve various informations from the /chosen node of the
-	 * device-tree, including the platform type, initrd location and
-	 * size, TCE reserve, and more ...
-	 */
-	of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line);
-
-	/* Scan memory nodes and rebuild MEMBLOCKs */
-	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
-
-	/* Save command line for /proc/cmdline and then parse parameters */
-	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 	parse_early_param();
 
 	memblock_allow_resize();
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 0775e036c526..6c4efba8a9c7 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -50,7 +50,7 @@ char cmd_line[COMMAND_LINE_SIZE] __attribute__ ((section(".data")));
 
 void __init setup_arch(char **cmdline_p)
 {
-	*cmdline_p = cmd_line;
+	*cmdline_p = boot_command_line;
 
 	console_verbose();
 
-- 
cgit v1.2.3


From f75813c0127bbef41ac3152f64a72ba212a5514c Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Mon, 26 Aug 2013 10:20:26 -0500
Subject: mips: use early_init_dt_scan

Convert mips to use new early_init_dt_scan function.

Remove early_init_dt_scan_memory_arch

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Acked-by: John Crispin <blogic@openwrt.org>
---
 arch/mips/include/asm/prom.h |  3 ---
 arch/mips/kernel/prom.c      | 39 +++------------------------------------
 2 files changed, 3 insertions(+), 39 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h
index 1e7e0961064b..e3dbd0e0608e 100644
--- a/arch/mips/include/asm/prom.h
+++ b/arch/mips/include/asm/prom.h
@@ -17,9 +17,6 @@
 #include <linux/types.h>
 #include <asm/bootinfo.h>
 
-extern int early_init_dt_scan_memory_arch(unsigned long node,
-	const char *uname, int depth, void *data);
-
 extern void device_tree_init(void);
 
 static inline unsigned long pci_address_to_pio(phys_addr_t address)
diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
index 0fa0b69cdd53..67a4c53b2b54 100644
--- a/arch/mips/kernel/prom.c
+++ b/arch/mips/kernel/prom.c
@@ -17,8 +17,6 @@
 #include <linux/debugfs.h>
 #include <linux/of.h>
 #include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
 
 #include <asm/page.h>
 #include <asm/prom.h>
@@ -40,13 +38,6 @@ char *mips_get_machine_name(void)
 }
 
 #ifdef CONFIG_OF
-int __init early_init_dt_scan_memory_arch(unsigned long node,
-					  const char *uname, int depth,
-					  void *data)
-{
-	return early_init_dt_scan_memory(node, uname, depth, data);
-}
-
 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 {
 	return add_memory_region(base, size, BOOT_MEM_RAM);
@@ -78,36 +69,12 @@ int __init early_init_dt_scan_model(unsigned long node,	const char *uname,
 	return 0;
 }
 
-void __init early_init_devtree(void *params)
-{
-	/* Setup flat device-tree pointer */
-	initial_boot_params = params;
-
-	/* Retrieve various informations from the /chosen node of the
-	 * device-tree, including the platform type, initrd location and
-	 * size, and more ...
-	 */
-	of_scan_flat_dt(early_init_dt_scan_chosen, arcs_cmdline);
-
-
-	/* Scan memory nodes */
-	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-	of_scan_flat_dt(early_init_dt_scan_memory_arch, NULL);
-
-	/* try to load the mips machine name */
-	of_scan_flat_dt(early_init_dt_scan_model, NULL);
-}
-
 void __init __dt_setup_arch(struct boot_param_header *bph)
 {
-	if (be32_to_cpu(bph->magic) != OF_DT_HEADER) {
-		pr_err("DTB has bad magic, ignoring builtin OF DTB\n");
-
+	if (!early_init_dt_scan(bph))
 		return;
-	}
-
-	initial_boot_params = bph;
 
-	early_init_devtree(initial_boot_params);
+	/* try to load the mips machine name */
+	of_scan_flat_dt(early_init_dt_scan_model, NULL);
 }
 #endif
-- 
cgit v1.2.3


From e94353890aaae1ab81dcacb3cafb449432224d3f Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Mon, 26 Aug 2013 10:25:26 -0500
Subject: openrisc: use early_init_dt_scan

Convert openrisc to use new early_init_dt_scan function.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: linux@lists.openrisc.net
---
 arch/openrisc/kernel/prom.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/openrisc/kernel/prom.c b/arch/openrisc/kernel/prom.c
index 3b94972e52b2..fbed459ea365 100644
--- a/arch/openrisc/kernel/prom.c
+++ b/arch/openrisc/kernel/prom.c
@@ -55,20 +55,7 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 
 void __init early_init_devtree(void *params)
 {
-	/* Setup flat device-tree pointer */
-	initial_boot_params = params;
-
-
-	/* Retrieve various informations from the /chosen node of the
-	 * device-tree, including the platform type, initrd location and
-	 * size, TCE reserve, and more ...
-	 */
-	of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
-
-	/* Scan memory nodes and rebuild MEMBLOCKs */
-	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
-
+	early_init_dt_scan(params);
 	memblock_allow_resize();
 }
 
-- 
cgit v1.2.3


From 7745fc1fec6ec9556e4cc36c21b0e02589078902 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Wed, 28 Aug 2013 10:05:10 -0500
Subject: xtensa: use early_init_dt_scan

Convert xtensa to use new early_init_dt_scan function.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: linux-xtensa@linux-xtensa.org
---
 arch/xtensa/kernel/setup.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index fc31ec1e977d..65974a8f41a4 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -219,9 +219,13 @@ static int __init parse_bootparam(const bp_tag_t* tag)
 }
 
 #ifdef CONFIG_OF
+bool __initdata dt_memory_scan = false;
 
 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 {
+	if (!dt_memory_scan)
+		return;
+
 	size &= PAGE_MASK;
 	add_sysmem_bank(MEMORY_TYPE_CONVENTIONAL, base, base + size);
 }
@@ -233,20 +237,13 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 
 void __init early_init_devtree(void *params)
 {
-	/* Setup flat device-tree pointer */
-	initial_boot_params = params;
+	if (sysmem.nr_banks == 0)
+		dt_memory_scan = true;
 
-	/* Retrieve various informations from the /chosen node of the
-	 * device-tree, including the platform type, initrd location and
-	 * size, TCE reserve, and more ...
-	 */
-	if (!command_line[0])
-		of_scan_flat_dt(early_init_dt_scan_chosen, command_line);
+	early_init_dt_scan(params);
 
-	/* Scan memory nodes and rebuild MEMBLOCKs */
-	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-	if (sysmem.nr_banks == 0)
-		of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+	if (!command_line[0])
+		strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 }
 
 static int __init xtensa_device_probe(void)
-- 
cgit v1.2.3


From 068f6310b965d67d57f89ebf4c539e5933754366 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Tue, 24 Sep 2013 22:20:01 -0500
Subject: of: create default early_init_dt_add_memory_arch

Create a weak version of early_init_dt_add_memory_arch which uses
memblock. This will unify all architectures except ones with custom
memory bank structs.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Jonas Bonn <jonas@southpole.se>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: microblaze-uclinux@itee.uq.edu.au
Cc: linux@lists.openrisc.net
Cc: devicetree@vger.kernel.org
---
 arch/arm64/kernel/setup.c     | 18 ------------------
 arch/microblaze/kernel/prom.c |  5 -----
 arch/openrisc/kernel/prom.c   |  6 ------
 drivers/of/fdt.c              | 19 +++++++++++++++++++
 4 files changed, 19 insertions(+), 29 deletions(-)

(limited to 'arch')

diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 4a5f6243ade2..7feb0c97d0dd 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -147,24 +147,6 @@ static void __init setup_machine_fdt(phys_addr_t dt_phys)
 	pr_info("Machine: %s\n", machine_name);
 }
 
-void __init early_init_dt_add_memory_arch(u64 base, u64 size)
-{
-	base &= PAGE_MASK;
-	size &= PAGE_MASK;
-	if (base + size < PHYS_OFFSET) {
-		pr_warning("Ignoring memory block 0x%llx - 0x%llx\n",
-			   base, base + size);
-		return;
-	}
-	if (base < PHYS_OFFSET) {
-		pr_warning("Ignoring memory range 0x%llx - 0x%llx\n",
-			   base, PHYS_OFFSET);
-		size -= PHYS_OFFSET - base;
-		base = PHYS_OFFSET;
-	}
-	memblock_add(base, size);
-}
-
 /*
  * Limit the memory size that was specified via FDT.
  */
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index e13686ede330..951e4d61ca2d 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -41,11 +41,6 @@
 #include <asm/sections.h>
 #include <asm/pci-bridge.h>
 
-void __init early_init_dt_add_memory_arch(u64 base, u64 size)
-{
-	memblock_add(base, size);
-}
-
 #ifdef CONFIG_EARLY_PRINTK
 static char *stdout;
 
diff --git a/arch/openrisc/kernel/prom.c b/arch/openrisc/kernel/prom.c
index fbed459ea365..6dbcaa85421c 100644
--- a/arch/openrisc/kernel/prom.c
+++ b/arch/openrisc/kernel/prom.c
@@ -47,12 +47,6 @@
 #include <asm/sections.h>
 #include <asm/setup.h>
 
-void __init early_init_dt_add_memory_arch(u64 base, u64 size)
-{
-	size &= PAGE_MASK;
-	memblock_add(base, size);
-}
-
 void __init early_init_devtree(void *params)
 {
 	early_init_dt_scan(params);
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index bfbfda543768..5bc55b6e2b41 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -775,6 +775,25 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
 }
 
 #ifdef CONFIG_HAVE_MEMBLOCK
+void __init __weak early_init_dt_add_memory_arch(u64 base, u64 size)
+{
+	const u64 phys_offset = __pa(PAGE_OFFSET);
+	base &= PAGE_MASK;
+	size &= PAGE_MASK;
+	if (base + size < phys_offset) {
+		pr_warning("Ignoring memory block 0x%llx - 0x%llx\n",
+			   base, base + size);
+		return;
+	}
+	if (base < phys_offset) {
+		pr_warning("Ignoring memory range 0x%llx - 0x%llx\n",
+			   base, phys_offset);
+		size -= phys_offset - base;
+		base = phys_offset;
+	}
+	memblock_add(base, size);
+}
+
 /*
  * called from unflatten_device_tree() to bootstrap devicetree itself
  * Architectures can override this definition if memblock isn't used
-- 
cgit v1.2.3


From 65939301acdb1e593fdb424bd356f0b9bc7ba5be Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Fri, 30 Aug 2013 10:54:26 -0500
Subject: arm: set initrd_start/initrd_end for fdt scan

In order to unify the initrd scanning for DT across architectures, make
arm set initrd_start and initrd_end instead of the physical addresses.
This is aligned with all other architectures.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Grant Likely <grant.likely@linaro.org>
---
 arch/arm/mm/init.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index febaee7ca57b..9eeb1cd1c401 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -77,11 +77,11 @@ static int __init parse_tag_initrd2(const struct tag *tag)
 
 __tagtable(ATAG_INITRD2, parse_tag_initrd2);
 
-#ifdef CONFIG_OF_FLATTREE
+#if defined(CONFIG_OF_FLATTREE) && defined(CONFIG_BLK_DEV_INITRD)
 void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
 {
-	phys_initrd_start = start;
-	phys_initrd_size = end - start;
+	initrd_start = (unsigned long)__va(start);
+	initrd_end = (unsigned long)__va(end);
 }
 #endif /* CONFIG_OF_FLATTREE */
 
@@ -351,6 +351,11 @@ void __init arm_memblock_init(struct meminfo *mi,
 	memblock_reserve(__pa(_stext), _end - _stext);
 #endif
 #ifdef CONFIG_BLK_DEV_INITRD
+	/* FDT scan will populate initrd_start */
+	if (initrd_start) {
+		phys_initrd_start = __virt_to_phys(initrd_start);
+		phys_initrd_size = initrd_end - initrd_start;
+	}
 	if (phys_initrd_size &&
 	    !memblock_is_region_memory(phys_initrd_start, phys_initrd_size)) {
 		pr_err("INITRD: 0x%08llx+0x%08lx is not a memory region - disabling initrd\n",
-- 
cgit v1.2.3


From ec2eaa73b3d21776f46797a2eef983d7be09a964 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Sun, 25 Aug 2013 16:47:48 -0500
Subject: arm64: set initrd_start/initrd_end for fdt scan

In order to unify the initrd scanning for DT across architectures, make
arm64 use initrd_start and initrd_end instead of the physical addresses.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
---
 arch/arm64/mm/init.c | 24 ++++++------------------
 1 file changed, 6 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index de2de5db628d..8261f4e60795 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -39,17 +39,9 @@
 
 #include "mm.h"
 
-static unsigned long phys_initrd_start __initdata = 0;
-static unsigned long phys_initrd_size __initdata = 0;
-
 phys_addr_t memstart_addr __read_mostly = 0;
 
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	phys_initrd_start = start;
-	phys_initrd_size = end - start;
-}
-
+#ifdef CONFIG_BLK_DEV_INITRD
 static int __init early_initrd(char *p)
 {
 	unsigned long start, size;
@@ -59,12 +51,13 @@ static int __init early_initrd(char *p)
 	if (*endp == ',') {
 		size = memparse(endp + 1, NULL);
 
-		phys_initrd_start = start;
-		phys_initrd_size = size;
+		initrd_start = (unsigned long)__va(start);
+		initrd_end = (unsigned long)__va(start + size);
 	}
 	return 0;
 }
 early_param("initrd", early_initrd);
+#endif
 
 #define MAX_DMA32_PFN ((4UL * 1024 * 1024 * 1024) >> PAGE_SHIFT)
 
@@ -137,13 +130,8 @@ void __init arm64_memblock_init(void)
 	/* Register the kernel text, kernel data and initrd with memblock */
 	memblock_reserve(__pa(_text), _end - _text);
 #ifdef CONFIG_BLK_DEV_INITRD
-	if (phys_initrd_size) {
-		memblock_reserve(phys_initrd_start, phys_initrd_size);
-
-		/* Now convert initrd to virtual addresses */
-		initrd_start = __phys_to_virt(phys_initrd_start);
-		initrd_end = initrd_start + phys_initrd_size;
-	}
+	if (initrd_start)
+		memblock_reserve(__virt_to_phys(initrd_start), initrd_end - initrd_start);
 #endif
 
 	/*
-- 
cgit v1.2.3


From 29eb45a9ab4839a1e9cef2bcf369b918c9c4fcad Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Fri, 30 Aug 2013 17:06:53 -0500
Subject: of: remove early_init_dt_setup_initrd_arch

All arches do essentially the same thing now for
early_init_dt_setup_initrd_arch, so it can now be removed.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
---
 arch/arc/mm/init.c            |  7 -------
 arch/arm/mm/init.c            |  8 --------
 arch/c6x/kernel/devicetree.c  | 10 ----------
 arch/metag/mm/init.c          |  9 ---------
 arch/microblaze/kernel/prom.c |  9 ---------
 arch/mips/kernel/prom.c       | 10 ----------
 arch/openrisc/kernel/prom.c   |  9 ---------
 arch/powerpc/kernel/prom.c    |  9 ---------
 arch/x86/kernel/devicetree.c  |  9 ---------
 arch/xtensa/kernel/setup.c    | 15 ++++-----------
 drivers/of/fdt.c              |  9 ++++++---
 include/linux/of_fdt.h        | 10 ----------
 12 files changed, 10 insertions(+), 104 deletions(-)

(limited to 'arch')

diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
index 81279ec73a6a..55e0a85bea78 100644
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -125,10 +125,3 @@ void __init free_initrd_mem(unsigned long start, unsigned long end)
 	free_reserved_area((void *)start, (void *)end, -1, "initrd");
 }
 #endif
-
-#ifdef CONFIG_OF_FLATTREE
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	pr_err("%s(%llx, %llx)\n", __func__, start, end);
-}
-#endif /* CONFIG_OF_FLATTREE */
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 9eeb1cd1c401..9d0b91dccf37 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -77,14 +77,6 @@ static int __init parse_tag_initrd2(const struct tag *tag)
 
 __tagtable(ATAG_INITRD2, parse_tag_initrd2);
 
-#if defined(CONFIG_OF_FLATTREE) && defined(CONFIG_BLK_DEV_INITRD)
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	initrd_start = (unsigned long)__va(start);
-	initrd_end = (unsigned long)__va(end);
-}
-#endif /* CONFIG_OF_FLATTREE */
-
 /*
  * This keeps memory configuration data used by a couple memory
  * initialization functions, as well as show_mem() for the skipping
diff --git a/arch/c6x/kernel/devicetree.c b/arch/c6x/kernel/devicetree.c
index d28a92fc0c52..fa3e5741514e 100644
--- a/arch/c6x/kernel/devicetree.c
+++ b/arch/c6x/kernel/devicetree.c
@@ -10,18 +10,8 @@
  *
  */
 #include <linux/init.h>
-#include <linux/initrd.h>
 #include <linux/memblock.h>
 
-#ifdef CONFIG_BLK_DEV_INITRD
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	initrd_start = (unsigned long)__va(start);
-	initrd_end = (unsigned long)__va(end);
-	initrd_below_start_ok = 1;
-}
-#endif
-
 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 {
 	c6x_add_memory(base, size);
diff --git a/arch/metag/mm/init.c b/arch/metag/mm/init.c
index 123919534b80..249fff66add3 100644
--- a/arch/metag/mm/init.c
+++ b/arch/metag/mm/init.c
@@ -12,7 +12,6 @@
 #include <linux/percpu.h>
 #include <linux/memblock.h>
 #include <linux/initrd.h>
-#include <linux/of_fdt.h>
 
 #include <asm/setup.h>
 #include <asm/page.h>
@@ -405,11 +404,3 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 			   "initrd");
 }
 #endif
-
-#ifdef CONFIG_OF_FLATTREE
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	pr_err("%s(%llx, %llx)\n",
-	       __func__, start, end);
-}
-#endif /* CONFIG_OF_FLATTREE */
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index 951e4d61ca2d..cab6dc356119 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -114,15 +114,6 @@ void __init early_init_devtree(void *params)
 	pr_debug(" <- early_init_devtree()\n");
 }
 
-#ifdef CONFIG_BLK_DEV_INITRD
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	initrd_start = (unsigned long)__va(start);
-	initrd_end = (unsigned long)__va(end);
-	initrd_below_start_ok = 1;
-}
-#endif
-
 /*******
  *
  * New implementation of the OF "find" APIs, return a refcounted
diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
index 67a4c53b2b54..0b2485f9a6c1 100644
--- a/arch/mips/kernel/prom.c
+++ b/arch/mips/kernel/prom.c
@@ -13,7 +13,6 @@
 #include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/bootmem.h>
-#include <linux/initrd.h>
 #include <linux/debugfs.h>
 #include <linux/of.h>
 #include <linux/of_fdt.h>
@@ -48,15 +47,6 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 	return __alloc_bootmem(size, align, __pa(MAX_DMA_ADDRESS));
 }
 
-#ifdef CONFIG_BLK_DEV_INITRD
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	initrd_start = (unsigned long)__va(start);
-	initrd_end = (unsigned long)__va(end);
-	initrd_below_start_ok = 1;
-}
-#endif
-
 int __init early_init_dt_scan_model(unsigned long node,	const char *uname,
 				    int depth, void *data)
 {
diff --git a/arch/openrisc/kernel/prom.c b/arch/openrisc/kernel/prom.c
index 6dbcaa85421c..2aae474b44c3 100644
--- a/arch/openrisc/kernel/prom.c
+++ b/arch/openrisc/kernel/prom.c
@@ -52,12 +52,3 @@ void __init early_init_devtree(void *params)
 	early_init_dt_scan(params);
 	memblock_allow_resize();
 }
-
-#ifdef CONFIG_BLK_DEV_INITRD
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	initrd_start = (unsigned long)__va(start);
-	initrd_end = (unsigned long)__va(end);
-	initrd_below_start_ok = 1;
-}
-#endif
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index b7634ce41dbc..a0894688daef 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -546,15 +546,6 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 	memblock_add(base, size);
 }
 
-#ifdef CONFIG_BLK_DEV_INITRD
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	initrd_start = (unsigned long)__va(start);
-	initrd_end = (unsigned long)__va(end);
-	initrd_below_start_ok = 1;
-}
-#endif
-
 static void __init early_reserve_mem_dt(void)
 {
 	unsigned long i, len, dt_root;
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 0db805c4b9e8..0e1f95b06336 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -51,15 +51,6 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 	return __alloc_bootmem(size, align, __pa(MAX_DMA_ADDRESS));
 }
 
-#ifdef CONFIG_BLK_DEV_INITRD
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	initrd_start = (unsigned long)__va(start);
-	initrd_end = (unsigned long)__va(end);
-	initrd_below_start_ok = 1;
-}
-#endif
-
 void __init add_dtb(u64 data)
 {
 	initial_dtb = data + offsetof(struct setup_data, data);
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 65974a8f41a4..6e2b6638122d 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -61,8 +61,8 @@ extern struct rtc_ops no_rtc_ops;
 struct rtc_ops *rtc_ops;
 
 #ifdef CONFIG_BLK_DEV_INITRD
-extern void *initrd_start;
-extern void *initrd_end;
+extern unsigned long initrd_start;
+extern unsigned long initrd_end;
 int initrd_is_mapped = 0;
 extern int initrd_below_start_ok;
 #endif
@@ -149,8 +149,8 @@ static int __init parse_tag_initrd(const bp_tag_t* tag)
 {
 	meminfo_t* mi;
 	mi = (meminfo_t*)(tag->data);
-	initrd_start = __va(mi->start);
-	initrd_end = __va(mi->end);
+	initrd_start = (unsigned long)__va(mi->start);
+	initrd_end = (unsigned long)__va(mi->end);
 
 	return 0;
 }
@@ -167,13 +167,6 @@ static int __init parse_tag_fdt(const bp_tag_t *tag)
 
 __tagtable(BP_TAG_FDT, parse_tag_fdt);
 
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	initrd_start = (void *)__va(start);
-	initrd_end = (void *)__va(end);
-	initrd_below_start_ok = 1;
-}
-
 #endif /* CONFIG_OF */
 
 #endif /* CONFIG_BLK_DEV_INITRD */
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 5bc55b6e2b41..5f4cc88cd89e 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -624,7 +624,7 @@ int __init of_scan_flat_dt_by_path(const char *path,
  * early_init_dt_check_for_initrd - Decode initrd location from flat tree
  * @node: reference to node containing initrd location ('chosen')
  */
-void __init early_init_dt_check_for_initrd(unsigned long node)
+static void __init early_init_dt_check_for_initrd(unsigned long node)
 {
 	u64 start, end;
 	unsigned long len;
@@ -642,12 +642,15 @@ void __init early_init_dt_check_for_initrd(unsigned long node)
 		return;
 	end = of_read_number(prop, len/4);
 
-	early_init_dt_setup_initrd_arch(start, end);
+	initrd_start = (unsigned long)__va(start);
+	initrd_end = (unsigned long)__va(end);
+	initrd_below_start_ok = 1;
+
 	pr_debug("initrd_start=0x%llx  initrd_end=0x%llx\n",
 		 (unsigned long long)start, (unsigned long long)end);
 }
 #else
-inline void early_init_dt_check_for_initrd(unsigned long node)
+static inline void early_init_dt_check_for_initrd(unsigned long node)
 {
 }
 #endif /* CONFIG_BLK_DEV_INITRD */
diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
index 73e16511134e..b365f5ac7b54 100644
--- a/include/linux/of_fdt.h
+++ b/include/linux/of_fdt.h
@@ -96,22 +96,12 @@ extern int of_scan_flat_dt_by_path(const char *path,
 
 extern int early_init_dt_scan_chosen(unsigned long node, const char *uname,
 				     int depth, void *data);
-extern void early_init_dt_check_for_initrd(unsigned long node);
 extern int early_init_dt_scan_memory(unsigned long node, const char *uname,
 				     int depth, void *data);
 extern void early_init_dt_add_memory_arch(u64 base, u64 size);
 extern void * early_init_dt_alloc_memory_arch(u64 size, u64 align);
 extern u64 dt_mem_next_cell(int s, __be32 **cellp);
 
-/*
- * If BLK_DEV_INITRD, the fdt early init code will call this function,
- * to be provided by the arch code. start and end are specified as
- * physical addresses.
- */
-#ifdef CONFIG_BLK_DEV_INITRD
-extern void early_init_dt_setup_initrd_arch(u64 start, u64 end);
-#endif
-
 /* Early flat tree scan hooks */
 extern int early_init_dt_scan_root(unsigned long node, const char *uname,
 				   int depth, void *data);
-- 
cgit v1.2.3


From 9b7d9f27f6cf418a79b81d99688c2f92bf93fc49 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Mon, 26 Aug 2013 13:38:37 -0500
Subject: openrisc: remove unnecessary prom.c includes

It appears openrisc prom.c was just copied from another arch with a
bunch of unnecessary includes. Remove all the unecessary ones.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: linux@lists.openrisc.net
---
 arch/openrisc/kernel/prom.c | 22 ----------------------
 1 file changed, 22 deletions(-)

(limited to 'arch')

diff --git a/arch/openrisc/kernel/prom.c b/arch/openrisc/kernel/prom.c
index 2aae474b44c3..6a44340d1b18 100644
--- a/arch/openrisc/kernel/prom.c
+++ b/arch/openrisc/kernel/prom.c
@@ -18,34 +18,12 @@
  *
  */
 
-#include <stdarg.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
 #include <linux/init.h>
-#include <linux/threads.h>
-#include <linux/spinlock.h>
 #include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/stringify.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/bitops.h>
-#include <linux/module.h>
-#include <linux/kexec.h>
-#include <linux/debugfs.h>
-#include <linux/irq.h>
 #include <linux/memblock.h>
 #include <linux/of_fdt.h>
 
-#include <asm/prom.h>
 #include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/irq.h>
-#include <linux/io.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
 
 void __init early_init_devtree(void *params)
 {
-- 
cgit v1.2.3


From 65cd4f6c99c1170bd0114dbd71b978012ea44d28 Mon Sep 17 00:00:00 2001
From: Stephen Boyd
Date: Thu, 18 Jul 2013 16:21:18 -0700
Subject: arch_timer: Move to generic sched_clock framework

Register with the generic sched_clock framework now that it
supports 64 bits. This fixes two problems with the current
sched_clock support for machines using the architected timers.
First off, we don't subtract the start value from subsequent
sched_clock calls so we can potentially start off with
sched_clock returning gigantic numbers. Second, there is no
support for suspend/resume handling so problems such as discussed
in 6a4dae5 (ARM: 7565/1: sched: stop sched_clock() during
suspend, 2012-10-23) can happen without this patch. Finally, it
allows us to move the sched_clock setup into drivers clocksource
out of the arch ports.

Cc: Christopher Covington <cov@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
 arch/arm/kernel/arch_timer.c         | 14 --------------
 arch/arm64/Kconfig                   |  1 +
 arch/arm64/kernel/time.c             | 10 ----------
 drivers/clocksource/arm_arch_timer.c | 10 ++++++++++
 4 files changed, 11 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c
index 221f07b11ccb..1791f12c180b 100644
--- a/arch/arm/kernel/arch_timer.c
+++ b/arch/arm/kernel/arch_timer.c
@@ -11,7 +11,6 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/errno.h>
-#include <linux/sched_clock.h>
 
 #include <asm/delay.h>
 
@@ -22,13 +21,6 @@ static unsigned long arch_timer_read_counter_long(void)
 	return arch_timer_read_counter();
 }
 
-static u32 sched_clock_mult __read_mostly;
-
-static unsigned long long notrace arch_timer_sched_clock(void)
-{
-	return arch_timer_read_counter() * sched_clock_mult;
-}
-
 static struct delay_timer arch_delay_timer;
 
 static void __init arch_timer_delay_timer_register(void)
@@ -48,11 +40,5 @@ int __init arch_timer_arch_init(void)
 
 	arch_timer_delay_timer_register();
 
-	/* Cache the sched_clock multiplier to save a divide in the hot path. */
-	sched_clock_mult = NSEC_PER_SEC / arch_timer_rate;
-	sched_clock_func = arch_timer_sched_clock;
-	pr_info("sched_clock: ARM arch timer >56 bits at %ukHz, resolution %uns\n",
-		arch_timer_rate / 1000, sched_clock_mult);
-
 	return 0;
 }
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index c04454876bcb..35fd0eb57270 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -14,6 +14,7 @@ config ARM64
 	select GENERIC_IOMAP
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
+	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
 	select HARDIRQS_SW_RESEND
diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c
index 03dc3718eb13..29c39d5d77e3 100644
--- a/arch/arm64/kernel/time.c
+++ b/arch/arm64/kernel/time.c
@@ -61,13 +61,6 @@ unsigned long profile_pc(struct pt_regs *regs)
 EXPORT_SYMBOL(profile_pc);
 #endif
 
-static u64 sched_clock_mult __read_mostly;
-
-unsigned long long notrace sched_clock(void)
-{
-	return arch_timer_read_counter() * sched_clock_mult;
-}
-
 void __init time_init(void)
 {
 	u32 arch_timer_rate;
@@ -78,9 +71,6 @@ void __init time_init(void)
 	if (!arch_timer_rate)
 		panic("Unable to initialise architected timer.\n");
 
-	/* Cache the sched_clock multiplier to save a divide in the hot path. */
-	sched_clock_mult = NSEC_PER_SEC / arch_timer_rate;
-
 	/* Calibrate the delay loop directly */
 	lpj_fine = arch_timer_rate / HZ;
 }
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index fbd9ccd5e114..5d527895c74d 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -19,6 +19,7 @@
 #include <linux/of_address.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/sched_clock.h>
 
 #include <asm/arch_timer.h>
 #include <asm/virt.h>
@@ -471,6 +472,15 @@ static int __init arch_timer_register(void)
 		goto out;
 	}
 
+	clocksource_register_hz(&clocksource_counter, arch_timer_rate);
+	cyclecounter.mult = clocksource_counter.mult;
+	cyclecounter.shift = clocksource_counter.shift;
+	timecounter_init(&timecounter, &cyclecounter,
+			 arch_counter_get_cntvct());
+
+	/* 56 bits minimum, so we assume worst case rollover */
+	sched_clock_register(arch_timer_read_counter, 56, arch_timer_rate);
+
 	if (arch_timer_use_virtual) {
 		ppi = arch_timer_ppi[VIRT_PPI];
 		err = request_percpu_irq(ppi, arch_timer_handler_virt,
-- 
cgit v1.2.3


From 880beb8807814c7785680bcbdc81dcf076f585db Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Tue, 27 Aug 2013 21:43:12 -0500
Subject: arc: use common of_flat_dt_match_machine

Convert arc to use the common of_flat_dt_match_machine function.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
---
 arch/arc/include/asm/mach_desc.h | 16 ++--------
 arch/arc/kernel/devtree.c        | 67 ++++++++++++----------------------------
 arch/arc/kernel/setup.c          |  2 +-
 3 files changed, 23 insertions(+), 62 deletions(-)

(limited to 'arch')

diff --git a/arch/arc/include/asm/mach_desc.h b/arch/arc/include/asm/mach_desc.h
index d3e9c0a05be8..e8993a2be6c2 100644
--- a/arch/arc/include/asm/mach_desc.h
+++ b/arch/arc/include/asm/mach_desc.h
@@ -51,22 +51,12 @@ struct machine_desc {
 /*
  * Current machine - only accessible during boot.
  */
-extern struct machine_desc *machine_desc;
+extern const struct machine_desc *machine_desc;
 
 /*
  * Machine type table - also only accessible during boot
  */
-extern struct machine_desc __arch_info_begin[], __arch_info_end[];
-#define for_each_machine_desc(p)			\
-	for (p = __arch_info_begin; p < __arch_info_end; p++)
-
-static inline struct machine_desc *default_machine_desc(void)
-{
-	/* the default machine is the last one linked in */
-	if (__arch_info_end - 1 < __arch_info_begin)
-		return NULL;
-	return __arch_info_end - 1;
-}
+extern const struct machine_desc __arch_info_begin[], __arch_info_end[];
 
 /*
  * Set of macros to define architecture features.
@@ -81,6 +71,6 @@ __attribute__((__section__(".arch.info.init"))) = {	\
 #define MACHINE_END				\
 };
 
-extern struct machine_desc *setup_machine_fdt(void *dt);
+extern const struct machine_desc *setup_machine_fdt(void *dt);
 
 #endif
diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c
index 1ab6f3569f60..d7b5322ffed5 100644
--- a/arch/arc/kernel/devtree.c
+++ b/arch/arc/kernel/devtree.c
@@ -18,6 +18,19 @@
 #include <asm/clk.h>
 #include <asm/mach_desc.h>
 
+static const void * __init arch_get_next_mach(const char *const **match)
+{
+	static const struct machine_desc *mdesc = __arch_info_begin;
+	const struct machine_desc *m = mdesc;
+
+	if (m >= __arch_info_end)
+		return NULL;
+
+	mdesc++;
+	*match = m->dt_compat;
+	return m;
+}
+
 /**
  * setup_machine_fdt - Machine setup when an dtb was passed to the kernel
  * @dt:		virtual address pointer to dt blob
@@ -25,66 +38,24 @@
  * If a dtb was passed to the kernel, then use it to choose the correct
  * machine_desc and to setup the system.
  */
-struct machine_desc * __init setup_machine_fdt(void *dt)
+const struct machine_desc * __init setup_machine_fdt(void *dt)
 {
-	struct machine_desc *mdesc = NULL, *mdesc_best = NULL;
-	unsigned int score, mdesc_score = ~1;
+	const struct machine_desc *mdesc;
 	unsigned long dt_root;
-	const char *model, *compat;
 	void *clk;
-	char manufacturer[16];
 	unsigned long len;
 
 	if (!early_init_dt_scan(dt))
 		return NULL;
 
-	dt_root = of_get_flat_dt_root();
-
-	/*
-	 * The kernel could be multi-platform enabled, thus could have many
-	 * "baked-in" machine descriptors. Search thru all for the best
-	 * "compatible" string match.
-	 */
-	for_each_machine_desc(mdesc) {
-		score = of_flat_dt_match(dt_root, mdesc->dt_compat);
-		if (score > 0 && score < mdesc_score) {
-			mdesc_best = mdesc;
-			mdesc_score = score;
-		}
-	}
-	if (!mdesc_best) {
-		const char *prop;
-		long size;
-
-		pr_err("\n unrecognized device tree list:\n[ ");
-
-		prop = of_get_flat_dt_prop(dt_root, "compatible", &size);
-		if (prop) {
-			while (size > 0) {
-				printk("'%s' ", prop);
-				size -= strlen(prop) + 1;
-				prop += strlen(prop) + 1;
-			}
-		}
-		printk("]\n\n");
-
+	mdesc = of_flat_dt_match_machine(NULL, arch_get_next_mach);
+	if (!mdesc)
 		machine_halt();
-	}
-
-	/* compat = "<manufacturer>,<model>" */
-	compat =  mdesc_best->dt_compat[0];
-
-	model = strchr(compat, ',');
-	if (model)
-		model++;
-
-	strlcpy(manufacturer, compat, model ? model - compat : strlen(compat));
-
-	pr_info("Board \"%s\" from %s (Manufacturer)\n", model, manufacturer);
 
+	dt_root = of_get_flat_dt_root();
 	clk = of_get_flat_dt_prop(dt_root, "clock-frequency", &len);
 	if (clk)
 		arc_set_core_freq(of_read_ulong(clk, len/4));
 
-	return mdesc_best;
+	return mdesc;
 }
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 710bf895dc2c..8a9cf4e7403b 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -31,7 +31,7 @@
 int running_on_hw = 1;	/* vs. on ISS */
 
 char __initdata command_line[COMMAND_LINE_SIZE];
-struct machine_desc *machine_desc;
+const struct machine_desc *machine_desc;
 
 struct task_struct *_current_task[NR_CPUS];	/* For stack switching */
 
-- 
cgit v1.2.3


From 6d67a9f672f4718a3a9060a96f859d0465663b55 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Tue, 27 Aug 2013 21:43:49 -0500
Subject: arm: use common of_flat_dt_match_machine

Convert arm to use the common of_flat_dt_match_machine function.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
---
 arch/arm/kernel/devtree.c | 41 +++++++++++++++++++----------------------
 1 file changed, 19 insertions(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index e7ce175b99e3..739c3dfc1da2 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -174,6 +174,19 @@ bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
 	return (phys_id & MPIDR_HWID_BITMASK) == cpu_logical_map(cpu);
 }
 
+static const void * __init arch_get_next_mach(const char *const **match)
+{
+	static const struct machine_desc *mdesc = __arch_info_begin;
+	const struct machine_desc *m = mdesc;
+
+	if (m >= __arch_info_end)
+		return NULL;
+
+	mdesc++;
+	*match = m->dt_compat;
+	return m;
+}
+
 /**
  * setup_machine_fdt - Machine setup when an dtb was passed to the kernel
  * @dt_phys: physical address of dt blob
@@ -184,9 +197,6 @@ bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
 const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 {
 	const struct machine_desc *mdesc, *mdesc_best = NULL;
-	unsigned int score, mdesc_score = ~1;
-	unsigned long dt_root;
-	const char *model;
 
 #ifdef CONFIG_ARCH_MULTIPLATFORM
 	DT_MACHINE_START(GENERIC_DT, "Generic DT based system")
@@ -198,23 +208,17 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 	if (!dt_phys || !early_init_dt_scan(phys_to_virt(dt_phys)))
 		return NULL;
 
+	mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach);
 
-	/* Search the mdescs for the 'best' compatible value match */
-	dt_root = of_get_flat_dt_root();
-	for_each_machine_desc(mdesc) {
-		score = of_flat_dt_match(dt_root, mdesc->dt_compat);
-		if (score > 0 && score < mdesc_score) {
-			mdesc_best = mdesc;
-			mdesc_score = score;
-		}
-	}
-	if (!mdesc_best) {
+	if (!mdesc) {
 		const char *prop;
 		long size;
+		unsigned long dt_root;
 
 		early_print("\nError: unrecognized/unsupported "
 			    "device tree compatible list:\n[ ");
 
+		dt_root = of_get_flat_dt_root();
 		prop = of_get_flat_dt_prop(dt_root, "compatible", &size);
 		while (size > 0) {
 			early_print("'%s' ", prop);
@@ -226,15 +230,8 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 		dump_machine_table(); /* does not return */
 	}
 
-	model = of_get_flat_dt_prop(dt_root, "model", NULL);
-	if (!model)
-		model = of_get_flat_dt_prop(dt_root, "compatible", NULL);
-	if (!model)
-		model = "<unknown>";
-	pr_info("Machine: %s, model: %s\n", mdesc_best->name, model);
-
 	/* Change machine number to match the mdesc we're using */
-	__machine_arch_type = mdesc_best->nr;
+	__machine_arch_type = mdesc->nr;
 
-	return mdesc_best;
+	return mdesc;
 }
-- 
cgit v1.2.3


From f2b99bccae87de82a5d03838abe85d604ee7e525 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Tue, 27 Aug 2013 21:44:37 -0500
Subject: arm64: use common of_flat_dt_get_machine_name

Convert arm64 to use the common of_flat_dt_get_machine_name function.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
---
 arch/arm64/kernel/setup.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 7feb0c97d0dd..a4ed2d3e4de9 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -124,8 +124,6 @@ static void __init setup_processor(void)
 
 static void __init setup_machine_fdt(phys_addr_t dt_phys)
 {
-	unsigned long dt_root;
-
 	if (!dt_phys || !early_init_dt_scan(phys_to_virt(dt_phys))) {
 		early_print("\n"
 			"Error: invalid device tree blob at physical address 0x%p (virtual address 0x%p)\n"
@@ -137,14 +135,7 @@ static void __init setup_machine_fdt(phys_addr_t dt_phys)
 			cpu_relax();
 	}
 
-	dt_root = of_get_flat_dt_root();
-
-	machine_name = of_get_flat_dt_prop(dt_root, "model", NULL);
-	if (!machine_name)
-		machine_name = of_get_flat_dt_prop(dt_root, "compatible", NULL);
-	if (!machine_name)
-		machine_name = "<unknown>";
-	pr_info("Machine: %s\n", machine_name);
+	machine_name = of_flat_dt_get_machine_name();
 }
 
 /*
-- 
cgit v1.2.3


From 986c494b3c05bac5eace21f8e3a42f2afbfcbd34 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Wed, 25 Sep 2013 15:49:28 -0500
Subject: metag: use common of_flat_dt_match_machine

Convert metag to use the common of_flat_dt_get_machine_name function.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
[james.hogan: fix missing arch_get_next_mach and const mismatch]
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
---
 arch/metag/include/asm/mach/arch.h |  2 +-
 arch/metag/include/asm/prom.h      |  2 +-
 arch/metag/kernel/devtree.c        | 60 ++++++++++++--------------------------
 arch/metag/kernel/setup.c          |  2 +-
 4 files changed, 22 insertions(+), 44 deletions(-)

(limited to 'arch')

diff --git a/arch/metag/include/asm/mach/arch.h b/arch/metag/include/asm/mach/arch.h
index 12c5664fea6e..433f94624fa2 100644
--- a/arch/metag/include/asm/mach/arch.h
+++ b/arch/metag/include/asm/mach/arch.h
@@ -53,7 +53,7 @@ struct machine_desc {
 /*
  * Current machine - only accessible during boot.
  */
-extern struct machine_desc *machine_desc;
+extern const struct machine_desc *machine_desc;
 
 /*
  * Machine type table - also only accessible during boot
diff --git a/arch/metag/include/asm/prom.h b/arch/metag/include/asm/prom.h
index d2aa35d2228e..9f67cbf3dcb7 100644
--- a/arch/metag/include/asm/prom.h
+++ b/arch/metag/include/asm/prom.h
@@ -17,7 +17,7 @@
 #include <asm/setup.h>
 #define HAVE_ARCH_DEVTREE_FIXUPS
 
-extern struct machine_desc *setup_machine_fdt(void *dt);
+extern const struct machine_desc *setup_machine_fdt(void *dt);
 extern void copy_fdt(void);
 
 #endif /* __ASM_METAG_PROM_H */
diff --git a/arch/metag/kernel/devtree.c b/arch/metag/kernel/devtree.c
index 68c2fee788c8..18dd7aea9fdc 100644
--- a/arch/metag/kernel/devtree.c
+++ b/arch/metag/kernel/devtree.c
@@ -34,6 +34,19 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 	return alloc_bootmem_align(size, align);
 }
 
+static const void * __init arch_get_next_mach(const char *const **match)
+{
+	static const struct machine_desc *mdesc = __arch_info_begin;
+	const struct machine_desc *m = mdesc;
+
+	if (m >= __arch_info_end)
+		return NULL;
+
+	mdesc++;
+	*match = m->dt_compat;
+	return m;
+}
+
 /**
  * setup_machine_fdt - Machine setup when an dtb was passed to the kernel
  * @dt:		virtual address pointer to dt blob
@@ -41,53 +54,18 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
  * If a dtb was passed to the kernel, then use it to choose the correct
  * machine_desc and to setup the system.
  */
-struct machine_desc * __init setup_machine_fdt(void *dt)
+const struct machine_desc * __init setup_machine_fdt(void *dt)
 {
-	struct machine_desc *mdesc, *mdesc_best = NULL;
-	unsigned int score, mdesc_score = ~1;
-	unsigned long dt_root;
-	const char *model;
+	const struct machine_desc *mdesc;
 
 	/* check device tree validity */
 	if (!early_init_dt_scan(dt))
 		return NULL;
 
-	/* Search the mdescs for the 'best' compatible value match */
-	dt_root = of_get_flat_dt_root();
-
-	for_each_machine_desc(mdesc) {
-		score = of_flat_dt_match(dt_root, mdesc->dt_compat);
-		if (score > 0 && score < mdesc_score) {
-			mdesc_best = mdesc;
-			mdesc_score = score;
-		}
-	}
-	if (!mdesc_best) {
-		const char *prop;
-		long size;
-
-		pr_err("\nError: unrecognized/unsupported device tree compatible list:\n[ ");
-
-		prop = of_get_flat_dt_prop(dt_root, "compatible", &size);
-		if (prop) {
-			while (size > 0) {
-				printk("'%s' ", prop);
-				size -= strlen(prop) + 1;
-				prop += strlen(prop) + 1;
-			}
-		}
-		printk("]\n\n");
-
+	mdesc = of_flat_dt_match_machine(NULL, arch_get_next_mach);
+	if (!mdesc)
 		dump_machine_table(); /* does not return */
-	}
-
-	model = of_get_flat_dt_prop(dt_root, "model", NULL);
-	if (!model)
-		model = of_get_flat_dt_prop(dt_root, "compatible", NULL);
-	if (!model)
-		model = "<unknown>";
-	pr_info("Machine: %s, model: %s\n", mdesc_best->name, model);
-
-	return mdesc_best;
+	pr_info("Machine name: %s\n", mdesc->name);
 
+	return mdesc;
 }
diff --git a/arch/metag/kernel/setup.c b/arch/metag/kernel/setup.c
index 2c697d343088..92cc119594d3 100644
--- a/arch/metag/kernel/setup.c
+++ b/arch/metag/kernel/setup.c
@@ -115,7 +115,7 @@ extern u32 __dtb_start[];
 extern struct console dash_console;
 #endif
 
-struct machine_desc *machine_desc __initdata;
+const struct machine_desc *machine_desc __initdata;
 
 /*
  * Map a Linux CPU number to a hardware thread ID
-- 
cgit v1.2.3


From 97e7f455434704b4d42f918ac3de76f593e642c1 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Wed, 28 Aug 2013 09:56:40 -0500
Subject: mips: use common of_flat_dt_get_machine_name

Convert mips to use the common of_flat_dt_get_machine_name function.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Acked-by: John Crispin <blogic@openwrt.org>
---
 arch/mips/kernel/prom.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
index 0b2485f9a6c1..3c3b0df8f48d 100644
--- a/arch/mips/kernel/prom.c
+++ b/arch/mips/kernel/prom.c
@@ -47,24 +47,11 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 	return __alloc_bootmem(size, align, __pa(MAX_DMA_ADDRESS));
 }
 
-int __init early_init_dt_scan_model(unsigned long node,	const char *uname,
-				    int depth, void *data)
-{
-	if (!depth) {
-		char *model = of_get_flat_dt_prop(node, "model", NULL);
-
-		if (model)
-			mips_set_machine_name(model);
-	}
-	return 0;
-}
-
 void __init __dt_setup_arch(struct boot_param_header *bph)
 {
 	if (!early_init_dt_scan(bph))
 		return;
 
-	/* try to load the mips machine name */
-	of_scan_flat_dt(early_init_dt_scan_model, NULL);
+	mips_set_machine_name(of_flat_dt_get_machine_name());
 }
 #endif
-- 
cgit v1.2.3


From c0c376687ba979a6c2f2626d5a1eb94ece44f7b4 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Sun, 8 Sep 2013 14:28:38 -0500
Subject: ARM: keystone: remove unnecessary prom.h include

Remove unnecessary prom.h include in preparation to make prom.h optional.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
---
 arch/arm/mach-keystone/platsmp.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c
index c12296157d4a..5cf0683577ea 100644
--- a/arch/arm/mach-keystone/platsmp.c
+++ b/arch/arm/mach-keystone/platsmp.c
@@ -17,7 +17,6 @@
 #include <linux/io.h>
 
 #include <asm/smp_plat.h>
-#include <asm/prom.h>
 
 #include "keystone.h"
 
-- 
cgit v1.2.3


From e2d1c994f7194e933236bd874b2d7f31b678bb94 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Sat, 7 Sep 2013 14:57:42 -0500
Subject: arm64: remove unnecessary prom.h include

Remove unnecessary prom.h include in preparation to make prom.h optional.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/mm/init.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 8261f4e60795..0cb8742de4f2 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -31,7 +31,6 @@
 #include <linux/sort.h>
 #include <linux/of_fdt.h>
 
-#include <asm/prom.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/sizes.h>
-- 
cgit v1.2.3


From be5973117bd48624d9e7d7728d754f4c9a322193 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Sun, 8 Sep 2013 14:26:28 -0500
Subject: arc: remove unnecessary prom.h includes

Remove unnecessary prom.h includes in preparation to remove prom.h.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
---
 arch/arc/kernel/devtree.c | 1 -
 arch/arc/kernel/setup.c   | 1 -
 2 files changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c
index d7b5322ffed5..b6dc4e21fd32 100644
--- a/arch/arc/kernel/devtree.c
+++ b/arch/arc/kernel/devtree.c
@@ -14,7 +14,6 @@
 #include <linux/memblock.h>
 #include <linux/of.h>
 #include <linux/of_fdt.h>
-#include <asm/prom.h>
 #include <asm/clk.h>
 #include <asm/mach_desc.h>
 
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 8a9cf4e7403b..f7d4a41d0629 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -21,7 +21,6 @@
 #include <asm/setup.h>
 #include <asm/page.h>
 #include <asm/irq.h>
-#include <asm/prom.h>
 #include <asm/unwind.h>
 #include <asm/clk.h>
 #include <asm/mach_desc.h>
-- 
cgit v1.2.3


From 0b81430590882954ed60a138ac2bad1149303165 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Sun, 8 Sep 2013 14:27:41 -0500
Subject: hexagon: remove unnecessary prom.h includes

Hexagon does not have a prom.h header, so it is probably broken with
CONFIG_OF enabled. In any case, remove unnecessary prom.h include in
preparation to make prom.h optional.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Richard Kuo <rkuo@codeaurora.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: linux-hexagon@vger.kernel.org
---
 arch/hexagon/kernel/setup.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'arch')

diff --git a/arch/hexagon/kernel/setup.c b/arch/hexagon/kernel/setup.c
index 29d1f1b00016..0e7c1dbb37b2 100644
--- a/arch/hexagon/kernel/setup.c
+++ b/arch/hexagon/kernel/setup.c
@@ -32,9 +32,6 @@
 #include <asm/hexagon_vm.h>
 #include <asm/vm_mmu.h>
 #include <asm/time.h>
-#ifdef CONFIG_OF
-#include <asm/prom.h>
-#endif
 
 char cmd_line[COMMAND_LINE_SIZE];
 static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
-- 
cgit v1.2.3


From 7b009939af9bc7b698d7ddec03d53604efff881c Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Sun, 8 Sep 2013 14:27:53 -0500
Subject: metag: move setup_machine_fdt declaration from prom.h

Move setup_machine_fdt out of prom.h and into asm/setup.h in preparation
to remove prom.h.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
---
 arch/metag/include/asm/prom.h  | 2 --
 arch/metag/include/asm/setup.h | 1 +
 arch/metag/kernel/setup.c      | 1 -
 3 files changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/metag/include/asm/prom.h b/arch/metag/include/asm/prom.h
index 9f67cbf3dcb7..e19022c5a0cb 100644
--- a/arch/metag/include/asm/prom.h
+++ b/arch/metag/include/asm/prom.h
@@ -14,10 +14,8 @@
 #ifndef __ASM_METAG_PROM_H
 #define __ASM_METAG_PROM_H
 
-#include <asm/setup.h>
 #define HAVE_ARCH_DEVTREE_FIXUPS
 
-extern const struct machine_desc *setup_machine_fdt(void *dt);
 extern void copy_fdt(void);
 
 #endif /* __ASM_METAG_PROM_H */
diff --git a/arch/metag/include/asm/setup.h b/arch/metag/include/asm/setup.h
index e13083b15dd0..e9fdee9452b1 100644
--- a/arch/metag/include/asm/setup.h
+++ b/arch/metag/include/asm/setup.h
@@ -3,6 +3,7 @@
 
 #include <uapi/asm/setup.h>
 
+extern const struct machine_desc *setup_machine_fdt(void *dt);
 void per_cpu_trap_init(unsigned long);
 extern void __init dump_machine_table(void);
 #endif /* _ASM_METAG_SETUP_H */
diff --git a/arch/metag/kernel/setup.c b/arch/metag/kernel/setup.c
index 92cc119594d3..8c4b3976bebf 100644
--- a/arch/metag/kernel/setup.c
+++ b/arch/metag/kernel/setup.c
@@ -42,7 +42,6 @@
 #include <asm/mmu.h>
 #include <asm/mmzone.h>
 #include <asm/processor.h>
-#include <asm/prom.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/traps.h>
-- 
cgit v1.2.3


From 5c9f303e996516dd0dcc2ce8c2b95504d3137b19 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Sat, 7 Sep 2013 14:05:10 -0500
Subject: microblaze: clean-up prom.h implicit includes

While powerpc is a mess of implicit includes by prom.h, microblaze just
copied this and is easily fixed. Add the necessary explicit includes and
remove unnecessary includes and other parts from prom.h

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: microblaze-uclinux@itee.uq.edu.au
Cc: netdev@vger.kernel.org
---
 arch/microblaze/include/asm/prom.h          | 28 +---------------------------
 arch/microblaze/kernel/prom.c               |  1 +
 arch/microblaze/kernel/setup.c              |  1 +
 arch/microblaze/kernel/timer.c              |  1 +
 arch/microblaze/pci/pci-common.c            |  1 +
 drivers/net/ethernet/xilinx/ll_temac_main.c |  1 +
 6 files changed, 6 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index 9977816c5ad3..f05bedce70d0 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -11,17 +11,10 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
-
-#include <linux/of.h>	/* linux/of.h gets to determine #include ordering */
-
 #ifndef _ASM_MICROBLAZE_PROM_H
 #define _ASM_MICROBLAZE_PROM_H
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
 
-#include <linux/types.h>
-#include <asm/irq.h>
-#include <linux/atomic.h>
+#include <linux/of.h>
 
 #define HAVE_ARCH_DEVTREE_FIXUPS
 
@@ -42,23 +35,4 @@ extern unsigned long pci_address_to_pio(phys_addr_t address);
 #define pci_address_to_pio pci_address_to_pio
 #endif	/* CONFIG_PCI */
 
-/* Parse the ibm,dma-window property of an OF node into the busno, phys and
- * size parameters.
- */
-void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
-		unsigned long *busno, unsigned long *phys, unsigned long *size);
-
-extern void kdump_move_device_tree(void);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-
-/* These includes are put at the bottom because they may contain things
- * that are overridden by this file.  Ideally they shouldn't be included
- * by this file, but there are a bunch of .c files that currently depend
- * on it.  Eventually they will be cleaned up. */
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/platform_device.h>
-
 #endif /* _ASM_MICROBLAZE_PROM_H */
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index cab6dc356119..abdfb10e7eca 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -30,6 +30,7 @@
 #include <linux/debugfs.h>
 #include <linux/irq.h>
 #include <linux/memblock.h>
+#include <linux/of_fdt.h>
 
 #include <asm/prom.h>
 #include <asm/page.h>
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 6c4efba8a9c7..8de8ebc309f1 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -16,6 +16,7 @@
 #include <linux/initrd.h>
 #include <linux/console.h>
 #include <linux/debugfs.h>
+#include <linux/of_fdt.h>
 
 #include <asm/setup.h>
 #include <asm/sections.h>
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index e4b3f33ef34c..827df4d003c8 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -15,6 +15,7 @@
 #include <linux/clk.h>
 #include <linux/clockchips.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <asm/cpuinfo.h>
 #include <linux/cnt32_to_63.h>
 
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 1b93bf0892a0..7c8a35238f74 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -29,6 +29,7 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_pci.h>
 #include <linux/export.h>
 
diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index b88121f240ca..22478d54f5bb 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -36,6 +36,7 @@
 #include <linux/netdevice.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
 #include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
-- 
cgit v1.2.3


From 089a49b68ce9bfe078d509d96c78a94e5f865ca9 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Sat, 7 Sep 2013 14:58:54 -0500
Subject: mips: add explicit includes of prom.h

In preparation of removing prom.h include by of.h, add explicit includes.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
---
 arch/mips/lantiq/prom.c           | 1 +
 arch/mips/mti-sead3/sead3-setup.c | 2 ++
 arch/mips/ralink/of.c             | 1 +
 3 files changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
index 49c460370285..19686c5bc5ed 100644
--- a/arch/mips/lantiq/prom.c
+++ b/arch/mips/lantiq/prom.c
@@ -14,6 +14,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/time.h>
+#include <asm/prom.h>
 
 #include <lantiq.h>
 
diff --git a/arch/mips/mti-sead3/sead3-setup.c b/arch/mips/mti-sead3/sead3-setup.c
index b5059dc899f4..928ba84c8a78 100644
--- a/arch/mips/mti-sead3/sead3-setup.c
+++ b/arch/mips/mti-sead3/sead3-setup.c
@@ -10,6 +10,8 @@
 #include <linux/of_fdt.h>
 #include <linux/bootmem.h>
 
+#include <asm/prom.h>
+
 #include <asm/mips-boards/generic.h>
 
 const char *get_system_type(void)
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
index ce38d11f9da5..58c4fd52202e 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -21,6 +21,7 @@
 #include <asm/reboot.h>
 #include <asm/bootinfo.h>
 #include <asm/addrspace.h>
+#include <asm/prom.h>
 
 #include "common.h"
 
-- 
cgit v1.2.3


From ba904f0649357a3cbd67e752d30898c42b1fc91a Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Mon, 9 Sep 2013 18:13:22 -0500
Subject: x86: add necessary includes for prom.h

Once prom.h is no longer implicitly included, we need to include setup.h
to get COMMAND_LINE_SIZE.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
---
 arch/x86/kernel/devicetree.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 0e1f95b06336..679d676a30d7 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -20,6 +20,7 @@
 #include <asm/hpet.h>
 #include <asm/apic.h>
 #include <asm/pci_x86.h>
+#include <asm/setup.h>
 
 __initdata u64 initial_dtb;
 char __initdata cmd_line[COMMAND_LINE_SIZE];
-- 
cgit v1.2.3


From 25ff79443cbfa924b8df1d4a8a0fbff83816938a Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Sat, 7 Sep 2013 14:07:11 -0500
Subject: of: implement pci_address_to_pio as weak function

Implement pci_address_to_pio as weak function to remove the dependency on
asm/prom.h. This is in preparation to make prom.h optional.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Grant Likely <grant.likely@linaro.org>
---
 arch/microblaze/include/asm/prom.h |  9 ---------
 arch/mips/include/asm/prom.h       | 11 -----------
 arch/powerpc/include/asm/prom.h    |  5 -----
 arch/x86/include/asm/prom.h        |  3 ---
 arch/x86/kernel/devicetree.c       | 10 ----------
 drivers/of/address.c               |  8 ++++++++
 drivers/of/of_pci.c                |  1 -
 include/linux/of_address.h         |  5 +----
 8 files changed, 9 insertions(+), 43 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index f05bedce70d0..0ebd924902df 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -26,13 +26,4 @@ enum early_consoles {
 
 extern int of_early_console(void *version);
 
-/*
- * OF address retreival & translation
- */
-
-#ifdef CONFIG_PCI
-extern unsigned long pci_address_to_pio(phys_addr_t address);
-#define pci_address_to_pio pci_address_to_pio
-#endif	/* CONFIG_PCI */
-
 #endif /* _ASM_MICROBLAZE_PROM_H */
diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h
index e3dbd0e0608e..ccd2b75f152c 100644
--- a/arch/mips/include/asm/prom.h
+++ b/arch/mips/include/asm/prom.h
@@ -19,17 +19,6 @@
 
 extern void device_tree_init(void);
 
-static inline unsigned long pci_address_to_pio(phys_addr_t address)
-{
-	/*
-	 * The ioport address can be directly used by inX() / outX()
-	 */
-	BUG_ON(address > IO_SPACE_LIMIT);
-
-	return (unsigned long) address;
-}
-#define pci_address_to_pio pci_address_to_pio
-
 struct boot_param_header;
 
 extern void __dt_setup_arch(struct boot_param_header *bph);
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index 7d0c7f3a7171..bd215f74df0f 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -30,11 +30,6 @@
 extern u64 of_translate_dma_address(struct device_node *dev,
 				    const __be32 *in_addr);
 
-#ifdef CONFIG_PCI
-extern unsigned long pci_address_to_pio(phys_addr_t address);
-#define pci_address_to_pio pci_address_to_pio
-#endif	/* CONFIG_PCI */
-
 /* Parse the ibm,dma-window property of an OF node into the busno, phys and
  * size parameters.
  */
diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h
index bade6ac3b14f..8ef2ec70858f 100644
--- a/arch/x86/include/asm/prom.h
+++ b/arch/x86/include/asm/prom.h
@@ -39,9 +39,6 @@ static inline void x86_dtb_init(void) { }
 
 extern char cmd_line[COMMAND_LINE_SIZE];
 
-#define pci_address_to_pio pci_address_to_pio
-unsigned long pci_address_to_pio(phys_addr_t addr);
-
 #define HAVE_ARCH_DEVTREE_FIXUPS
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 679d676a30d7..cffd07368547 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -27,16 +27,6 @@ char __initdata cmd_line[COMMAND_LINE_SIZE];
 
 int __initdata of_ioapic;
 
-unsigned long pci_address_to_pio(phys_addr_t address)
-{
-	/*
-	 * The ioport address can be directly used by inX / outX
-	 */
-	BUG_ON(address >= (1 << 16));
-	return (unsigned long)address;
-}
-EXPORT_SYMBOL_GPL(pci_address_to_pio);
-
 void __init early_init_dt_scan_chosen_arch(unsigned long node)
 {
 	BUG();
diff --git a/drivers/of/address.c b/drivers/of/address.c
index b55c21890760..556a7fb6ead3 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -626,6 +626,14 @@ const __be32 *of_get_address(struct device_node *dev, int index, u64 *size,
 }
 EXPORT_SYMBOL(of_get_address);
 
+unsigned long __weak pci_address_to_pio(phys_addr_t address)
+{
+	if (address > IO_SPACE_LIMIT)
+		return (unsigned long)-1;
+
+	return (unsigned long) address;
+}
+
 static int __of_address_to_resource(struct device_node *dev,
 		const __be32 *addrp, u64 size, unsigned int flags,
 		const char *name, struct resource *r)
diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
index e5ca00893c0c..848199633798 100644
--- a/drivers/of/of_pci.c
+++ b/drivers/of/of_pci.c
@@ -2,7 +2,6 @@
 #include <linux/export.h>
 #include <linux/of.h>
 #include <linux/of_pci.h>
-#include <asm/prom.h>
 
 static inline int __of_pci_pci_compare(struct device_node *node,
 				       unsigned int data)
diff --git a/include/linux/of_address.h b/include/linux/of_address.h
index 4c2e6f26432c..f6fc6899ceae 100644
--- a/include/linux/of_address.h
+++ b/include/linux/of_address.h
@@ -52,10 +52,7 @@ extern void __iomem *of_iomap(struct device_node *device, int index);
 extern const __be32 *of_get_address(struct device_node *dev, int index,
 			   u64 *size, unsigned int *flags);
 
-#ifndef pci_address_to_pio
-static inline unsigned long pci_address_to_pio(phys_addr_t addr) { return -1; }
-#define pci_address_to_pio pci_address_to_pio
-#endif
+extern unsigned long pci_address_to_pio(phys_addr_t addr);
 
 extern int of_pci_range_parser_init(struct of_pci_range_parser *parser,
 			struct device_node *node);
-- 
cgit v1.2.3


From 0c3f061c195ceb891067b6de9e4ecc347c4dea31 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Tue, 17 Sep 2013 10:42:50 -0500
Subject: of: implement of_node_to_nid as a weak function

Implement of_node_to_nid as weak function to remove the dependency on
asm/prom.h. This is in preparation to make prom.h optional.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
---
 arch/powerpc/include/asm/prom.h |  7 -------
 arch/sparc/include/asm/prom.h   |  4 ----
 drivers/of/base.c               |  7 +++++++
 include/linux/of.h              | 11 ++++-------
 4 files changed, 11 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index bd215f74df0f..6707c16d8fc5 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -42,13 +42,6 @@ extern void kdump_move_device_tree(void);
 /* cache lookup */
 struct device_node *of_find_next_cache_node(struct device_node *np);
 
-#ifdef CONFIG_NUMA
-extern int of_node_to_nid(struct device_node *device);
-#else
-static inline int of_node_to_nid(struct device_node *device) { return 0; }
-#endif
-#define of_node_to_nid of_node_to_nid
-
 extern void of_instantiate_rtc(void);
 
 extern int of_get_ibm_chip_id(struct device_node *np);
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
index 67c62578d170..60c8d7bd4058 100644
--- a/arch/sparc/include/asm/prom.h
+++ b/arch/sparc/include/asm/prom.h
@@ -43,10 +43,6 @@ extern int of_getintprop_default(struct device_node *np,
 				 const char *name,
 				 int def);
 extern int of_find_in_proplist(const char *list, const char *match, int len);
-#ifdef CONFIG_NUMA
-extern int of_node_to_nid(struct device_node *dp);
-#define of_node_to_nid of_node_to_nid
-#endif
 
 extern void prom_build_devicetree(void);
 extern void of_populate_present_mask(void);
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 865d3f66c86b..ced4c06d79b3 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -74,6 +74,13 @@ int of_n_size_cells(struct device_node *np)
 }
 EXPORT_SYMBOL(of_n_size_cells);
 
+#ifdef CONFIG_NUMA
+int __weak of_node_to_nid(struct device_node *np)
+{
+	return numa_node_id();
+}
+#endif
+
 #if defined(CONFIG_OF_DYNAMIC)
 /**
  *	of_node_get - Increment refcount of a node
diff --git a/include/linux/of.h b/include/linux/of.h
index f95aee391e30..4d294a0b8a57 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -534,13 +534,10 @@ static inline const char *of_prop_next_string(struct property *prop,
 #define of_match_node(_matches, _node)	NULL
 #endif /* CONFIG_OF */
 
-#ifndef of_node_to_nid
-static inline int of_node_to_nid(struct device_node *np)
-{
-	return numa_node_id();
-}
-
-#define of_node_to_nid of_node_to_nid
+#if defined(CONFIG_OF) && defined(CONFIG_NUMA)
+extern int of_node_to_nid(struct device_node *np);
+#else
+static inline int of_node_to_nid(struct device_node *device) { return 0; }
 #endif
 
 /**
-- 
cgit v1.2.3


From 32df8dca503f82c816f8be85a8d0a394a8b88c2c Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Sat, 7 Sep 2013 14:11:58 -0500
Subject: of: remove HAVE_ARCH_DEVTREE_FIXUPS

HAVE_ARCH_DEVTREE_FIXUPS appears to always be needed except for sparc,
but it is only used for /proc/device-teee and sparc does not enable
/proc/device-tree. So this option is redundant. Remove the option and
always enable it. This has the side effect of fixing /proc/device-tree
on arches such as arm64 which failed to define this option.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
---
 arch/arc/include/asm/prom.h        | 2 --
 arch/arm/include/asm/prom.h        | 2 --
 arch/metag/include/asm/prom.h      | 1 -
 arch/microblaze/include/asm/prom.h | 2 --
 arch/openrisc/include/asm/prom.h   | 2 --
 arch/powerpc/include/asm/prom.h    | 2 --
 arch/x86/include/asm/prom.h        | 2 --
 arch/xtensa/include/asm/prom.h     | 2 --
 fs/proc/proc_devtree.c             | 3 ---
 9 files changed, 18 deletions(-)

(limited to 'arch')

diff --git a/arch/arc/include/asm/prom.h b/arch/arc/include/asm/prom.h
index 692d0d0789a7..15555499e430 100644
--- a/arch/arc/include/asm/prom.h
+++ b/arch/arc/include/asm/prom.h
@@ -9,6 +9,4 @@
 #ifndef _ASM_ARC_PROM_H_
 #define _ASM_ARC_PROM_H_
 
-#define HAVE_ARCH_DEVTREE_FIXUPS
-
 #endif
diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h
index 4a2985e21969..b681575ad3de 100644
--- a/arch/arm/include/asm/prom.h
+++ b/arch/arm/include/asm/prom.h
@@ -11,8 +11,6 @@
 #ifndef __ASMARM_PROM_H
 #define __ASMARM_PROM_H
 
-#define HAVE_ARCH_DEVTREE_FIXUPS
-
 #ifdef CONFIG_OF
 
 extern const struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
diff --git a/arch/metag/include/asm/prom.h b/arch/metag/include/asm/prom.h
index e19022c5a0cb..d4be144a8613 100644
--- a/arch/metag/include/asm/prom.h
+++ b/arch/metag/include/asm/prom.h
@@ -14,7 +14,6 @@
 #ifndef __ASM_METAG_PROM_H
 #define __ASM_METAG_PROM_H
 
-#define HAVE_ARCH_DEVTREE_FIXUPS
 
 extern void copy_fdt(void);
 
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index 0ebd924902df..2f03ac815851 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -16,8 +16,6 @@
 
 #include <linux/of.h>
 
-#define HAVE_ARCH_DEVTREE_FIXUPS
-
 /* Other Prototypes */
 enum early_consoles {
 	UARTLITE = 1,
diff --git a/arch/openrisc/include/asm/prom.h b/arch/openrisc/include/asm/prom.h
index 93c9980e1b6b..bec477ba9f7d 100644
--- a/arch/openrisc/include/asm/prom.h
+++ b/arch/openrisc/include/asm/prom.h
@@ -17,6 +17,4 @@
 #ifndef _ASM_OPENRISC_PROM_H
 #define _ASM_OPENRISC_PROM_H
 
-#define HAVE_ARCH_DEVTREE_FIXUPS
-
 #endif /* _ASM_OPENRISC_PROM_H */
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index 6707c16d8fc5..43fe0023d722 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -20,8 +20,6 @@
 #include <asm/irq.h>
 #include <linux/atomic.h>
 
-#define HAVE_ARCH_DEVTREE_FIXUPS
-
 /*
  * OF address retreival & translation
  */
diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h
index 8ef2ec70858f..fbeb06ed0eaa 100644
--- a/arch/x86/include/asm/prom.h
+++ b/arch/x86/include/asm/prom.h
@@ -39,7 +39,5 @@ static inline void x86_dtb_init(void) { }
 
 extern char cmd_line[COMMAND_LINE_SIZE];
 
-#define HAVE_ARCH_DEVTREE_FIXUPS
-
 #endif /* __ASSEMBLY__ */
 #endif
diff --git a/arch/xtensa/include/asm/prom.h b/arch/xtensa/include/asm/prom.h
index f3d7cd2c0de7..2a87a583b41b 100644
--- a/arch/xtensa/include/asm/prom.h
+++ b/arch/xtensa/include/asm/prom.h
@@ -1,6 +1,4 @@
 #ifndef _XTENSA_ASM_PROM_H
 #define _XTENSA_ASM_PROM_H
 
-#define HAVE_ARCH_DEVTREE_FIXUPS
-
 #endif /* _XTENSA_ASM_PROM_H */
diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c
index 106a83570630..70779b2fc209 100644
--- a/fs/proc/proc_devtree.c
+++ b/fs/proc/proc_devtree.c
@@ -14,16 +14,13 @@
 #include <linux/of.h>
 #include <linux/export.h>
 #include <linux/slab.h>
-#include <asm/prom.h>
 #include <asm/uaccess.h>
 #include "internal.h"
 
 static inline void set_node_proc_entry(struct device_node *np,
 				       struct proc_dir_entry *de)
 {
-#ifdef HAVE_ARCH_DEVTREE_FIXUPS
 	np->pde = de;
-#endif
 }
 
 static struct proc_dir_entry *proc_device_tree;
-- 
cgit v1.2.3


From 4acf4b9cd4534aaa9102004937e1ba79da01d008 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Mon, 16 Sep 2013 21:03:24 -0500
Subject: of: move of_address_to_resource and of_iomap declarations from sparc

Move of_address_to_resource and of_iomap declarations to common code. These
only differ on sparc, but the declarations are the same and don't need to
be in arch header.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
---
 arch/sparc/include/asm/prom.h |  8 --------
 include/linux/of_address.h    | 30 +++++++++++++++++-------------
 2 files changed, 17 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
index 60c8d7bd4058..11ebd659e7b6 100644
--- a/arch/sparc/include/asm/prom.h
+++ b/arch/sparc/include/asm/prom.h
@@ -59,13 +59,5 @@ extern char *of_console_options;
 extern void irq_trans_init(struct device_node *dp);
 extern char *build_path_component(struct device_node *dp);
 
-/* SPARC has local implementations */
-extern int of_address_to_resource(struct device_node *dev, int index,
-				  struct resource *r);
-#define of_address_to_resource of_address_to_resource
-
-void __iomem *of_iomap(struct device_node *node, int index);
-#define of_iomap of_iomap
-
 #endif /* __KERNEL__ */
 #endif /* _SPARC_PROM_H */
diff --git a/include/linux/of_address.h b/include/linux/of_address.h
index f6fc6899ceae..e8a179773a1a 100644
--- a/include/linux/of_address.h
+++ b/include/linux/of_address.h
@@ -60,13 +60,6 @@ extern struct of_pci_range *of_pci_range_parser_one(
 					struct of_pci_range_parser *parser,
 					struct of_pci_range *range);
 #else /* CONFIG_OF_ADDRESS */
-#ifndef of_address_to_resource
-static inline int of_address_to_resource(struct device_node *dev, int index,
-					 struct resource *r)
-{
-	return -EINVAL;
-}
-#endif
 static inline struct device_node *of_find_matching_node_by_address(
 					struct device_node *from,
 					const struct of_device_id *matches,
@@ -74,12 +67,7 @@ static inline struct device_node *of_find_matching_node_by_address(
 {
 	return NULL;
 }
-#ifndef of_iomap
-static inline void __iomem *of_iomap(struct device_node *device, int index)
-{
-	return NULL;
-}
-#endif
+
 static inline const __be32 *of_get_address(struct device_node *dev, int index,
 					u64 *size, unsigned int *flags)
 {
@@ -100,6 +88,22 @@ static inline struct of_pci_range *of_pci_range_parser_one(
 }
 #endif /* CONFIG_OF_ADDRESS */
 
+#ifdef CONFIG_OF
+extern int of_address_to_resource(struct device_node *dev, int index,
+				  struct resource *r);
+void __iomem *of_iomap(struct device_node *node, int index);
+#else
+static inline int of_address_to_resource(struct device_node *dev, int index,
+					 struct resource *r)
+{
+	return -EINVAL;
+}
+
+static inline void __iomem *of_iomap(struct device_node *device, int index)
+{
+	return NULL;
+}
+#endif
 
 #if defined(CONFIG_OF_ADDRESS) && defined(CONFIG_PCI)
 extern const __be32 *of_get_pci_address(struct device_node *dev, int bar_no,
-- 
cgit v1.2.3


From d0dfa16a600190d142f7538e5909d13c35b60d98 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Mon, 16 Sep 2013 21:05:05 -0500
Subject: of: move of_translate_dma_address to of_address.h

of_translate_dma_address is implemented in common code, so move the
declaration there too.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
---
 arch/powerpc/include/asm/prom.h | 4 ----
 include/linux/of_address.h      | 4 ++++
 2 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index 43fe0023d722..b8774bdc69e0 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -24,10 +24,6 @@
  * OF address retreival & translation
  */
 
-/* Translate a DMA address from device space to CPU space */
-extern u64 of_translate_dma_address(struct device_node *dev,
-				    const __be32 *in_addr);
-
 /* Parse the ibm,dma-window property of an OF node into the busno, phys and
  * size parameters.
  */
diff --git a/include/linux/of_address.h b/include/linux/of_address.h
index e8a179773a1a..5f6ed6b182b8 100644
--- a/include/linux/of_address.h
+++ b/include/linux/of_address.h
@@ -34,6 +34,10 @@ static inline void of_pci_range_to_resource(struct of_pci_range *range,
 	res->name = np->full_name;
 }
 
+/* Translate a DMA address from device space to CPU space */
+extern u64 of_translate_dma_address(struct device_node *dev,
+				    const __be32 *in_addr);
+
 #ifdef CONFIG_OF_ADDRESS
 extern u64 of_translate_address(struct device_node *np, const __be32 *addr);
 extern bool of_can_translate_address(struct device_node *dev);
-- 
cgit v1.2.3


From 5c19c5c6d4f5e1dc0d0e26b683bc820dda01fe06 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Tue, 17 Sep 2013 14:34:00 -0500
Subject: powerpc: clean-up include ordering in prom.h

Now that the core OF headers don't depend on prom.h, rearrange the
includes. There are still lots of implicit includes in the powerpc tree,
so the includes of OF headers are still necessary.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
---
 arch/powerpc/include/asm/prom.h | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index b8774bdc69e0..7687f82a3217 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -1,4 +1,3 @@
-#include <linux/of.h>	/* linux/of.h gets to determine #include ordering */
 #ifndef _POWERPC_PROM_H
 #define _POWERPC_PROM_H
 #ifdef __KERNEL__
@@ -20,6 +19,13 @@
 #include <asm/irq.h>
 #include <linux/atomic.h>
 
+/* These includes should be removed once implicit includes are cleaned up. */
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+
 /*
  * OF address retreival & translation
  */
@@ -125,14 +131,5 @@ struct of_drconf_cell {
  */
 extern unsigned char ibm_architecture_vec[];
 
-/* These includes are put at the bottom because they may contain things
- * that are overridden by this file.  Ideally they shouldn't be included
- * by this file, but there are a bunch of .c files that currently depend
- * on it.  Eventually they will be cleaned up. */
-#include <linux/of_fdt.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/platform_device.h>
-
 #endif /* __KERNEL__ */
 #endif /* _POWERPC_PROM_H */
-- 
cgit v1.2.3


From 26a2056eb21fff26caf99d19ad5448e9403db55d Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Thu, 26 Sep 2013 07:40:04 -0500
Subject: powerpc: add explicit OF includes

When removing prom.h include by of.h, several OF headers will no longer
be implicitly included. Add explicit includes of of_*.h as needed.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: linuxppc-dev@lists.ozlabs.org
---
 arch/powerpc/kernel/epapr_paravirt.c             | 1 +
 arch/powerpc/platforms/512x/clock.c              | 1 +
 arch/powerpc/platforms/512x/pdm360ng.c           | 2 ++
 arch/powerpc/platforms/82xx/mpc8272_ads.c        | 2 ++
 arch/powerpc/platforms/82xx/pq2fads.c            | 2 ++
 arch/powerpc/platforms/83xx/suspend.c            | 2 ++
 arch/powerpc/platforms/85xx/c293pcie.c           | 1 +
 arch/powerpc/platforms/85xx/common.c             | 2 ++
 arch/powerpc/platforms/85xx/socrates_fpga_pic.c  | 2 ++
 arch/powerpc/platforms/86xx/pic.c                | 1 +
 arch/powerpc/platforms/8xx/ep88xc.c              | 2 ++
 arch/powerpc/platforms/8xx/mpc86xads_setup.c     | 2 ++
 arch/powerpc/platforms/8xx/mpc885ads_setup.c     | 2 ++
 arch/powerpc/platforms/8xx/tqm8xx_setup.c        | 1 +
 arch/powerpc/platforms/embedded6xx/flipper-pic.c | 1 +
 arch/powerpc/platforms/embedded6xx/hlwd-pic.c    | 2 ++
 arch/powerpc/platforms/pasemi/gpio_mdio.c        | 1 +
 arch/powerpc/platforms/powermac/pfunc_base.c     | 1 +
 arch/powerpc/platforms/powernv/opal-lpc.c        | 1 +
 arch/powerpc/platforms/powernv/opal.c            | 1 +
 arch/powerpc/platforms/powernv/setup.c           | 1 +
 arch/powerpc/platforms/pseries/hotplug-memory.c  | 2 ++
 arch/powerpc/sysdev/cpm_common.c                 | 1 +
 arch/powerpc/sysdev/fsl_gtm.c                    | 2 ++
 arch/powerpc/sysdev/fsl_pmc.c                    | 1 +
 arch/powerpc/sysdev/fsl_rio.c                    | 2 ++
 arch/powerpc/sysdev/fsl_rmu.c                    | 1 +
 arch/powerpc/sysdev/mpic.c                       | 8 ++++----
 arch/powerpc/sysdev/mpic_timer.c                 | 2 ++
 arch/powerpc/sysdev/of_rtc.c                     | 1 +
 arch/powerpc/sysdev/ppc4xx_soc.c                 | 1 +
 arch/powerpc/sysdev/xilinx_intc.c                | 1 +
 32 files changed, 49 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/epapr_paravirt.c b/arch/powerpc/kernel/epapr_paravirt.c
index 6300c13bbde4..7898be90f2dc 100644
--- a/arch/powerpc/kernel/epapr_paravirt.c
+++ b/arch/powerpc/kernel/epapr_paravirt.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/of.h>
+#include <linux/of_fdt.h>
 #include <asm/epapr_hcalls.h>
 #include <asm/cacheflush.h>
 #include <asm/code-patching.h>
diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
index e504166e089a..fd8a37653417 100644
--- a/arch/powerpc/platforms/512x/clock.c
+++ b/arch/powerpc/platforms/512x/clock.c
@@ -24,6 +24,7 @@
 #include <linux/mutex.h>
 #include <linux/io.h>
 
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <asm/mpc5xxx.h>
 #include <asm/mpc5121.h>
diff --git a/arch/powerpc/platforms/512x/pdm360ng.c b/arch/powerpc/platforms/512x/pdm360ng.c
index 24b314d7bd5f..116f2325b20b 100644
--- a/arch/powerpc/platforms/512x/pdm360ng.c
+++ b/arch/powerpc/platforms/512x/pdm360ng.c
@@ -14,6 +14,8 @@
 
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 
 #include <asm/machdep.h>
diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c
index 30394b409b3f..6a14cf50f4a2 100644
--- a/arch/powerpc/platforms/82xx/mpc8272_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c
@@ -16,6 +16,8 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/fsl_devices.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 #include <linux/io.h>
 
diff --git a/arch/powerpc/platforms/82xx/pq2fads.c b/arch/powerpc/platforms/82xx/pq2fads.c
index e1dceeec4994..e5f82ec8df17 100644
--- a/arch/powerpc/platforms/82xx/pq2fads.c
+++ b/arch/powerpc/platforms/82xx/pq2fads.c
@@ -15,6 +15,8 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/fsl_devices.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 
 #include <asm/io.h>
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
index 1d769a29249f..3d9716ccd327 100644
--- a/arch/powerpc/platforms/83xx/suspend.c
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -20,6 +20,8 @@
 #include <linux/freezer.h>
 #include <linux/suspend.h>
 #include <linux/fsl_devices.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/export.h>
 
diff --git a/arch/powerpc/platforms/85xx/c293pcie.c b/arch/powerpc/platforms/85xx/c293pcie.c
index 6208e49142bf..213d5b815827 100644
--- a/arch/powerpc/platforms/85xx/c293pcie.c
+++ b/arch/powerpc/platforms/85xx/c293pcie.c
@@ -11,6 +11,7 @@
 
 #include <linux/stddef.h>
 #include <linux/kernel.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 
 #include <asm/machdep.h>
diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c
index d0861a0d8360..eba78c85303f 100644
--- a/arch/powerpc/platforms/85xx/common.c
+++ b/arch/powerpc/platforms/85xx/common.c
@@ -5,6 +5,8 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
 #include <sysdev/cpm2_pic.h>
diff --git a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
index 3bbbf7489487..55a9682b9529 100644
--- a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
+++ b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
@@ -9,6 +9,8 @@
  */
 
 #include <linux/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/io.h>
 
diff --git a/arch/powerpc/platforms/86xx/pic.c b/arch/powerpc/platforms/86xx/pic.c
index 9982f57c98b9..d5b98c0f958a 100644
--- a/arch/powerpc/platforms/86xx/pic.c
+++ b/arch/powerpc/platforms/86xx/pic.c
@@ -10,6 +10,7 @@
 #include <linux/stddef.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
 #include <asm/mpic.h>
diff --git a/arch/powerpc/platforms/8xx/ep88xc.c b/arch/powerpc/platforms/8xx/ep88xc.c
index 7d9ac6040d63..e62166681d08 100644
--- a/arch/powerpc/platforms/8xx/ep88xc.c
+++ b/arch/powerpc/platforms/8xx/ep88xc.c
@@ -10,6 +10,8 @@
  */
 
 #include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 
 #include <asm/machdep.h>
diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
index 866feff83c91..63084640c5c5 100644
--- a/arch/powerpc/platforms/8xx/mpc86xads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
@@ -15,6 +15,8 @@
  */
 
 #include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 
 #include <asm/io.h>
diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
index 5d98398c2f5e..c1262581b63c 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
@@ -25,6 +25,8 @@
 #include <linux/fs_uart_pd.h>
 #include <linux/fsl_devices.h>
 #include <linux/mii.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 
 #include <asm/delay.h>
diff --git a/arch/powerpc/platforms/8xx/tqm8xx_setup.c b/arch/powerpc/platforms/8xx/tqm8xx_setup.c
index 8d21ab70e06c..c9a0d00a98ab 100644
--- a/arch/powerpc/platforms/8xx/tqm8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/tqm8xx_setup.c
@@ -28,6 +28,7 @@
 #include <linux/fs_uart_pd.h>
 #include <linux/fsl_devices.h>
 #include <linux/mii.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 
 #include <asm/delay.h>
diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.c b/arch/powerpc/platforms/embedded6xx/flipper-pic.c
index 53d6eee01963..4cde8e7da4b8 100644
--- a/arch/powerpc/platforms/embedded6xx/flipper-pic.c
+++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.c
@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <asm/io.h>
 
 #include "flipper-pic.h"
diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
index 3006b5117ec6..7cab21ded9d0 100644
--- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
+++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
@@ -18,6 +18,8 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <asm/io.h>
 
 #include "hlwd-pic.h"
diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c
index 0237ab782fb8..15adee544638 100644
--- a/arch/powerpc/platforms/pasemi/gpio_mdio.c
+++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c
@@ -30,6 +30,7 @@
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/phy.h>
+#include <linux/of_address.h>
 #include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 
diff --git a/arch/powerpc/platforms/powermac/pfunc_base.c b/arch/powerpc/platforms/powermac/pfunc_base.c
index f5e3cda6660e..e49d07f3d542 100644
--- a/arch/powerpc/platforms/powermac/pfunc_base.c
+++ b/arch/powerpc/platforms/powermac/pfunc_base.c
@@ -4,6 +4,7 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
+#include <linux/of_irq.h>
 
 #include <asm/pmac_feature.h>
 #include <asm/pmac_pfunc.h>
diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c
index a7614bb14e17..e7e59e4f9892 100644
--- a/arch/powerpc/platforms/powernv/opal-lpc.c
+++ b/arch/powerpc/platforms/powernv/opal-lpc.c
@@ -17,6 +17,7 @@
 #include <asm/firmware.h>
 #include <asm/xics.h>
 #include <asm/opal.h>
+#include <asm/prom.h>
 
 static int opal_lpc_chip_id = -1;
 
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 2911abe550f1..f36ff3518c07 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -13,6 +13,7 @@
 
 #include <linux/types.h>
 #include <linux/of.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 #include <linux/interrupt.h>
 #include <linux/notifier.h>
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index e239dcfa224c..19884b2a51b4 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -23,6 +23,7 @@
 #include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/of.h>
+#include <linux/of_fdt.h>
 #include <linux/interrupt.h>
 #include <linux/bug.h>
 
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 9a432de363b8..9590dbb756f2 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -10,12 +10,14 @@
  */
 
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/memblock.h>
 #include <linux/vmalloc.h>
 #include <linux/memory.h>
 
 #include <asm/firmware.h>
 #include <asm/machdep.h>
+#include <asm/prom.h>
 #include <asm/sparsemem.h>
 
 static unsigned long get_memblock_size(void)
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index 4dd534194ae8..4f7869571290 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -22,6 +22,7 @@
 #include <linux/spinlock.h>
 #include <linux/export.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/slab.h>
 
 #include <asm/udbg.h>
diff --git a/arch/powerpc/sysdev/fsl_gtm.c b/arch/powerpc/sysdev/fsl_gtm.c
index 0eb871cc3437..1b980eed235a 100644
--- a/arch/powerpc/sysdev/fsl_gtm.c
+++ b/arch/powerpc/sysdev/fsl_gtm.c
@@ -19,6 +19,8 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/spinlock.h>
 #include <linux/bitops.h>
 #include <linux/slab.h>
diff --git a/arch/powerpc/sysdev/fsl_pmc.c b/arch/powerpc/sysdev/fsl_pmc.c
index 592a0f8d527a..8cf4aa0e3a25 100644
--- a/arch/powerpc/sysdev/fsl_pmc.c
+++ b/arch/powerpc/sysdev/fsl_pmc.c
@@ -18,6 +18,7 @@
 #include <linux/suspend.h>
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 
 struct pmc_regs {
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index e2fb3171f41b..95dd892e9904 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -28,6 +28,8 @@
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
diff --git a/arch/powerpc/sysdev/fsl_rmu.c b/arch/powerpc/sysdev/fsl_rmu.c
index 14bd5221f28a..00e224a1048c 100644
--- a/arch/powerpc/sysdev/fsl_rmu.c
+++ b/arch/powerpc/sysdev/fsl_rmu.c
@@ -27,6 +27,7 @@
 #include <linux/types.h>
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
 
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 1be54faf60dd..2d30eafc40d8 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -535,7 +535,7 @@ static void __init mpic_scan_ht_pic(struct mpic *mpic, u8 __iomem *devbase,
 		mpic->fixups[irq].data = readl(base + 4) | 0x80000000;
 	}
 }
- 
+
 
 static void __init mpic_scan_ht_pics(struct mpic *mpic)
 {
@@ -1475,7 +1475,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	 * as a default instead of the value read from the HW.
 	 */
 	last_irq = (greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK)
-				>> MPIC_GREG_FEATURE_LAST_SRC_SHIFT;	
+				>> MPIC_GREG_FEATURE_LAST_SRC_SHIFT;
 	if (isu_size)
 		last_irq = isu_size  * MPIC_MAX_ISU - 1;
 	of_property_read_u32(mpic->node, "last-interrupt-source", &last_irq);
@@ -1625,7 +1625,7 @@ void __init mpic_init(struct mpic *mpic)
 			/* start with vector = source number, and masked */
 			u32 vecpri = MPIC_VECPRI_MASK | i |
 				(8 << MPIC_VECPRI_PRIORITY_SHIFT);
-		
+
 			/* check if protected */
 			if (mpic->protected && test_bit(i, mpic->protected))
 				continue;
@@ -1634,7 +1634,7 @@ void __init mpic_init(struct mpic *mpic)
 			mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), 1 << cpu);
 		}
 	}
-	
+
 	/* Init spurious vector */
 	mpic_write(mpic->gregs, MPIC_INFO(GREG_SPURIOUS), mpic->spurious_vec);
 
diff --git a/arch/powerpc/sysdev/mpic_timer.c b/arch/powerpc/sysdev/mpic_timer.c
index c06db92a4fb1..22d7d57eead9 100644
--- a/arch/powerpc/sysdev/mpic_timer.c
+++ b/arch/powerpc/sysdev/mpic_timer.c
@@ -19,7 +19,9 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
 #include <linux/syscore_ops.h>
 #include <sysdev/fsl_soc.h>
 #include <asm/io.h>
diff --git a/arch/powerpc/sysdev/of_rtc.c b/arch/powerpc/sysdev/of_rtc.c
index c9e803f3e267..6f54b54b1328 100644
--- a/arch/powerpc/sysdev/of_rtc.c
+++ b/arch/powerpc/sysdev/of_rtc.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/of.h>
 #include <linux/init.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
 
diff --git a/arch/powerpc/sysdev/ppc4xx_soc.c b/arch/powerpc/sysdev/ppc4xx_soc.c
index 0debcc31ad70..5c77c9ba33aa 100644
--- a/arch/powerpc/sysdev/ppc4xx_soc.c
+++ b/arch/powerpc/sysdev/ppc4xx_soc.c
@@ -19,6 +19,7 @@
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
 #include <asm/dcr.h>
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index 8d73c3c0bee6..f4fdc94ad2c0 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/i8259.h>
-- 
cgit v1.2.3


From 5116b1defad7cec648384c2d1bc0b7460d305c93 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Sat, 7 Sep 2013 14:33:54 -0500
Subject: of: remove empty arch prom.h headers

Now that prom.h is optional, all the empty prom.h headers can be removed.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
---
 arch/arc/include/asm/prom.h      | 12 ------------
 arch/arm64/include/asm/prom.h    |  1 -
 arch/c6x/include/asm/prom.h      |  1 -
 arch/metag/include/asm/prom.h    | 20 --------------------
 arch/openrisc/include/asm/prom.h | 20 --------------------
 arch/xtensa/include/asm/prom.h   |  4 ----
 6 files changed, 58 deletions(-)
 delete mode 100644 arch/arc/include/asm/prom.h
 delete mode 100644 arch/arm64/include/asm/prom.h
 delete mode 100644 arch/c6x/include/asm/prom.h
 delete mode 100644 arch/metag/include/asm/prom.h
 delete mode 100644 arch/openrisc/include/asm/prom.h
 delete mode 100644 arch/xtensa/include/asm/prom.h

(limited to 'arch')

diff --git a/arch/arc/include/asm/prom.h b/arch/arc/include/asm/prom.h
deleted file mode 100644
index 15555499e430..000000000000
--- a/arch/arc/include/asm/prom.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_ARC_PROM_H_
-#define _ASM_ARC_PROM_H_
-
-#endif
diff --git a/arch/arm64/include/asm/prom.h b/arch/arm64/include/asm/prom.h
deleted file mode 100644
index 68b90e682957..000000000000
--- a/arch/arm64/include/asm/prom.h
+++ /dev/null
@@ -1 +0,0 @@
-/* Empty for now */
diff --git a/arch/c6x/include/asm/prom.h b/arch/c6x/include/asm/prom.h
deleted file mode 100644
index b4ec95f07518..000000000000
--- a/arch/c6x/include/asm/prom.h
+++ /dev/null
@@ -1 +0,0 @@
-/* dummy prom.h; here to make linux/of.h's #includes happy */
diff --git a/arch/metag/include/asm/prom.h b/arch/metag/include/asm/prom.h
deleted file mode 100644
index d4be144a8613..000000000000
--- a/arch/metag/include/asm/prom.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  arch/metag/include/asm/prom.h
- *
- *  Copyright (C) 2012 Imagination Technologies Ltd.
- *
- *  Based on ARM version:
- *  Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __ASM_METAG_PROM_H
-#define __ASM_METAG_PROM_H
-
-
-extern void copy_fdt(void);
-
-#endif /* __ASM_METAG_PROM_H */
diff --git a/arch/openrisc/include/asm/prom.h b/arch/openrisc/include/asm/prom.h
deleted file mode 100644
index bec477ba9f7d..000000000000
--- a/arch/openrisc/include/asm/prom.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * OpenRISC Linux
- *
- * Linux architectural port borrowing liberally from similar works of
- * others.  All original copyrights apply as per the original source
- * declaration.
- *
- * OpenRISC implementation:
- * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
- * et al.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef _ASM_OPENRISC_PROM_H
-#define _ASM_OPENRISC_PROM_H
-
-#endif /* _ASM_OPENRISC_PROM_H */
diff --git a/arch/xtensa/include/asm/prom.h b/arch/xtensa/include/asm/prom.h
deleted file mode 100644
index 2a87a583b41b..000000000000
--- a/arch/xtensa/include/asm/prom.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _XTENSA_ASM_PROM_H
-#define _XTENSA_ASM_PROM_H
-
-#endif /* _XTENSA_ASM_PROM_H */
-- 
cgit v1.2.3


From 9e7827b5ea4ca93b4d864bc07c0fafb838d496b1 Mon Sep 17 00:00:00 2001
From: K. Y. Srinivasan
Date: Mon, 30 Sep 2013 17:28:52 +0200
Subject: x86, hyperv: Get the local APIC timer frequency from the hypervisor

Hyper-V supports a mechanism for retrieving the local APIC frequency.
Use this and bypass the calibration code in the kernel . This would
allow us to boot the Linux kernel as a "modern VM" on Hyper-V where
many of the legacy devices (such as PIT) are not emulated.

I would like to thank Olaf Hering <olaf@aepfle.de>, Jan Beulich <JBeulich@suse.com> and
H. Peter Anvin <h.peter.anvin@intel.com> for their help in this effort.

In this version of the patch, I have addressed Jan's comments.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Link: http://lkml.kernel.org/r/1380554932-9888-1-git-send-email-olaf@aepfle.de
Tested-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/uapi/asm/hyperv.h | 19 +++++++++++++++++++
 arch/x86/kernel/cpu/mshyperv.c     | 24 ++++++++++++++++++++++++
 2 files changed, 43 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/uapi/asm/hyperv.h b/arch/x86/include/uapi/asm/hyperv.h
index b80420bcd09d..b8f1c0176cbc 100644
--- a/arch/x86/include/uapi/asm/hyperv.h
+++ b/arch/x86/include/uapi/asm/hyperv.h
@@ -27,6 +27,19 @@
 #define HV_X64_MSR_VP_RUNTIME_AVAILABLE		(1 << 0)
 /* Partition Reference Counter (HV_X64_MSR_TIME_REF_COUNT) available*/
 #define HV_X64_MSR_TIME_REF_COUNT_AVAILABLE	(1 << 1)
+
+/*
+ * There is a single feature flag that signifies the presence of the MSR
+ * that can be used to retrieve both the local APIC Timer frequency as
+ * well as the TSC frequency.
+ */
+
+/* Local APIC timer frequency MSR (HV_X64_MSR_APIC_FREQUENCY) is available */
+#define HV_X64_MSR_APIC_FREQUENCY_AVAILABLE (1 << 11)
+
+/* TSC frequency MSR (HV_X64_MSR_TSC_FREQUENCY) is available */
+#define HV_X64_MSR_TSC_FREQUENCY_AVAILABLE (1 << 11)
+
 /*
  * Basic SynIC MSRs (HV_X64_MSR_SCONTROL through HV_X64_MSR_EOM
  * and HV_X64_MSR_SINT0 through HV_X64_MSR_SINT15) available
@@ -136,6 +149,12 @@
 /* MSR used to read the per-partition time reference counter */
 #define HV_X64_MSR_TIME_REF_COUNT		0x40000020
 
+/* MSR used to retrieve the TSC frequency */
+#define HV_X64_MSR_TSC_FREQUENCY		0x40000022
+
+/* MSR used to retrieve the local APIC timer frequency */
+#define HV_X64_MSR_APIC_FREQUENCY		0x40000023
+
 /* Define the virtual APIC registers */
 #define HV_X64_MSR_EOI				0x40000070
 #define HV_X64_MSR_ICR				0x40000071
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 71a39f3621ba..0a490ca278e7 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -15,6 +15,7 @@
 #include <linux/clocksource.h>
 #include <linux/module.h>
 #include <linux/hardirq.h>
+#include <linux/efi.h>
 #include <linux/interrupt.h>
 #include <asm/processor.h>
 #include <asm/hypervisor.h>
@@ -23,6 +24,7 @@
 #include <asm/desc.h>
 #include <asm/idle.h>
 #include <asm/irq_regs.h>
+#include <asm/i8259.h>
 
 struct ms_hyperv_info ms_hyperv;
 EXPORT_SYMBOL_GPL(ms_hyperv);
@@ -67,6 +69,8 @@ static struct clocksource hyperv_cs = {
 
 static void __init ms_hyperv_init_platform(void)
 {
+	u64	hv_lapic_frequency;
+
 	/*
 	 * Extract the features and hints
 	 */
@@ -76,6 +80,26 @@ static void __init ms_hyperv_init_platform(void)
 	printk(KERN_INFO "HyperV: features 0x%x, hints 0x%x\n",
 	       ms_hyperv.features, ms_hyperv.hints);
 
+	if (ms_hyperv.features & HV_X64_MSR_APIC_FREQUENCY_AVAILABLE) {
+		/*
+		 * Get the APIC frequency.
+		 */
+		rdmsrl(HV_X64_MSR_APIC_FREQUENCY, hv_lapic_frequency);
+		hv_lapic_frequency = div_u64(hv_lapic_frequency, HZ);
+		lapic_timer_frequency = hv_lapic_frequency;
+		printk(KERN_INFO "HyperV: LAPIC Timer Frequency: %#x\n",
+				lapic_timer_frequency);
+
+		/*
+		 * On Hyper-V, when we are booting off an EFI firmware stack,
+		 * we do not have many legacy devices including PIC, PIT etc.
+		 */
+		if (efi_enabled(EFI_BOOT)) {
+			printk(KERN_INFO "HyperV: Using null_legacy_pic\n");
+			legacy_pic = &null_legacy_pic;
+		}
+	}
+
 	if (ms_hyperv.features & HV_X64_MSR_TIME_REF_COUNT_AVAILABLE)
 		clocksource_register_hz(&hyperv_cs, NSEC_PER_SEC/100);
 }
-- 
cgit v1.2.3


From 90ab9d5510932e146a9443bf5a591f95d5b5ada8 Mon Sep 17 00:00:00 2001
From: K. Y. Srinivasan
Date: Thu, 10 Oct 2013 15:30:24 -0700
Subject: x86, hyperv: Correctly guard the local APIC calibration code

The code that gets the local APIC timer frequency from the hypervisor
rather depends on there being a local APIC.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Link: http://lkml.kernel.org/r/1381444224-3303-1-git-send-email-kys@microsoft.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/cpu/mshyperv.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 0a490ca278e7..628ff50ab75f 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -80,6 +80,7 @@ static void __init ms_hyperv_init_platform(void)
 	printk(KERN_INFO "HyperV: features 0x%x, hints 0x%x\n",
 	       ms_hyperv.features, ms_hyperv.hints);
 
+#ifdef CONFIG_X86_LOCAL_APIC
 	if (ms_hyperv.features & HV_X64_MSR_APIC_FREQUENCY_AVAILABLE) {
 		/*
 		 * Get the APIC frequency.
@@ -99,6 +100,7 @@ static void __init ms_hyperv_init_platform(void)
 			legacy_pic = &null_legacy_pic;
 		}
 	}
+#endif
 
 	if (ms_hyperv.features & HV_X64_MSR_TIME_REF_COUNT_AVAILABLE)
 		clocksource_register_hz(&hyperv_cs, NSEC_PER_SEC/100);
-- 
cgit v1.2.3


From 88f182dd779b9d350b4774c12d16633a5b60f50c Mon Sep 17 00:00:00 2001
From: Ingo Molnar
Date: Thu, 10 Oct 2013 10:16:30 +0200
Subject: x86: Apply the asm_volatile_goto() compiler quirk

Apply the asm_volatile_goto() compiler quirk to the new rmwcc.h
file as well, introduced in:

   c2daa3bed53a sched, x86: Provide a per-cpu preempt_count implementation

Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Suggested-by: Jakub Jelinek <jakub@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/include/asm/rmwcc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/rmwcc.h b/arch/x86/include/asm/rmwcc.h
index 735f1849795f..1ff990f1de8e 100644
--- a/arch/x86/include/asm/rmwcc.h
+++ b/arch/x86/include/asm/rmwcc.h
@@ -5,7 +5,7 @@
 
 #define __GEN_RMWcc(fullop, var, cc, ...)				\
 do {									\
-	asm volatile goto (fullop "; j" cc " %l[cc_label]"		\
+	asm_volatile_goto (fullop "; j" cc " %l[cc_label]"		\
 			: : "m" (var), ## __VA_ARGS__ 			\
 			: "memory" : cc_label);				\
 	return 0;							\
-- 
cgit v1.2.3


From 32ee1e188eadd7c997837649a107fd1c50feef7a Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:04:35 +1000
Subject: powerpc: Fix endian issues in VMX copy loops

Fix the permute loops for little endian.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/lib/copyuser_power7.S | 54 +++++++++++++++++++++----------------
 arch/powerpc/lib/memcpy_power7.S   | 55 ++++++++++++++++++++++----------------
 2 files changed, 63 insertions(+), 46 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S
index d1f11795a7ad..e8e9c36dc784 100644
--- a/arch/powerpc/lib/copyuser_power7.S
+++ b/arch/powerpc/lib/copyuser_power7.S
@@ -19,6 +19,14 @@
  */
 #include <asm/ppc_asm.h>
 
+#ifdef __BIG_ENDIAN__
+#define LVS(VRT,RA,RB)		lvsl	VRT,RA,RB
+#define VPERM(VRT,VRA,VRB,VRC)	vperm	VRT,VRA,VRB,VRC
+#else
+#define LVS(VRT,RA,RB)		lvsr	VRT,RA,RB
+#define VPERM(VRT,VRA,VRB,VRC)	vperm	VRT,VRB,VRA,VRC
+#endif
+
 	.macro err1
 100:
 	.section __ex_table,"a"
@@ -552,13 +560,13 @@ err3;	stw	r7,4(r3)
 	li	r10,32
 	li	r11,48
 
-	lvsl	vr16,0,r4	/* Setup permute control vector */
+	LVS(vr16,0,r4)		/* Setup permute control vector */
 err3;	lvx	vr0,0,r4
 	addi	r4,r4,16
 
 	bf	cr7*4+3,5f
 err3;	lvx	vr1,r0,r4
-	vperm	vr8,vr0,vr1,vr16
+	VPERM(vr8,vr0,vr1,vr16)
 	addi	r4,r4,16
 err3;	stvx	vr8,r0,r3
 	addi	r3,r3,16
@@ -566,9 +574,9 @@ err3;	stvx	vr8,r0,r3
 
 5:	bf	cr7*4+2,6f
 err3;	lvx	vr1,r0,r4
-	vperm	vr8,vr0,vr1,vr16
+	VPERM(vr8,vr0,vr1,vr16)
 err3;	lvx	vr0,r4,r9
-	vperm	vr9,vr1,vr0,vr16
+	VPERM(vr9,vr1,vr0,vr16)
 	addi	r4,r4,32
 err3;	stvx	vr8,r0,r3
 err3;	stvx	vr9,r3,r9
@@ -576,13 +584,13 @@ err3;	stvx	vr9,r3,r9
 
 6:	bf	cr7*4+1,7f
 err3;	lvx	vr3,r0,r4
-	vperm	vr8,vr0,vr3,vr16
+	VPERM(vr8,vr0,vr3,vr16)
 err3;	lvx	vr2,r4,r9
-	vperm	vr9,vr3,vr2,vr16
+	VPERM(vr9,vr3,vr2,vr16)
 err3;	lvx	vr1,r4,r10
-	vperm	vr10,vr2,vr1,vr16
+	VPERM(vr10,vr2,vr1,vr16)
 err3;	lvx	vr0,r4,r11
-	vperm	vr11,vr1,vr0,vr16
+	VPERM(vr11,vr1,vr0,vr16)
 	addi	r4,r4,64
 err3;	stvx	vr8,r0,r3
 err3;	stvx	vr9,r3,r9
@@ -611,21 +619,21 @@ err3;	stvx	vr11,r3,r11
 	.align	5
 8:
 err4;	lvx	vr7,r0,r4
-	vperm	vr8,vr0,vr7,vr16
+	VPERM(vr8,vr0,vr7,vr16)
 err4;	lvx	vr6,r4,r9
-	vperm	vr9,vr7,vr6,vr16
+	VPERM(vr9,vr7,vr6,vr16)
 err4;	lvx	vr5,r4,r10
-	vperm	vr10,vr6,vr5,vr16
+	VPERM(vr10,vr6,vr5,vr16)
 err4;	lvx	vr4,r4,r11
-	vperm	vr11,vr5,vr4,vr16
+	VPERM(vr11,vr5,vr4,vr16)
 err4;	lvx	vr3,r4,r12
-	vperm	vr12,vr4,vr3,vr16
+	VPERM(vr12,vr4,vr3,vr16)
 err4;	lvx	vr2,r4,r14
-	vperm	vr13,vr3,vr2,vr16
+	VPERM(vr13,vr3,vr2,vr16)
 err4;	lvx	vr1,r4,r15
-	vperm	vr14,vr2,vr1,vr16
+	VPERM(vr14,vr2,vr1,vr16)
 err4;	lvx	vr0,r4,r16
-	vperm	vr15,vr1,vr0,vr16
+	VPERM(vr15,vr1,vr0,vr16)
 	addi	r4,r4,128
 err4;	stvx	vr8,r0,r3
 err4;	stvx	vr9,r3,r9
@@ -649,13 +657,13 @@ err4;	stvx	vr15,r3,r16
 
 	bf	cr7*4+1,9f
 err3;	lvx	vr3,r0,r4
-	vperm	vr8,vr0,vr3,vr16
+	VPERM(vr8,vr0,vr3,vr16)
 err3;	lvx	vr2,r4,r9
-	vperm	vr9,vr3,vr2,vr16
+	VPERM(vr9,vr3,vr2,vr16)
 err3;	lvx	vr1,r4,r10
-	vperm	vr10,vr2,vr1,vr16
+	VPERM(vr10,vr2,vr1,vr16)
 err3;	lvx	vr0,r4,r11
-	vperm	vr11,vr1,vr0,vr16
+	VPERM(vr11,vr1,vr0,vr16)
 	addi	r4,r4,64
 err3;	stvx	vr8,r0,r3
 err3;	stvx	vr9,r3,r9
@@ -665,9 +673,9 @@ err3;	stvx	vr11,r3,r11
 
 9:	bf	cr7*4+2,10f
 err3;	lvx	vr1,r0,r4
-	vperm	vr8,vr0,vr1,vr16
+	VPERM(vr8,vr0,vr1,vr16)
 err3;	lvx	vr0,r4,r9
-	vperm	vr9,vr1,vr0,vr16
+	VPERM(vr9,vr1,vr0,vr16)
 	addi	r4,r4,32
 err3;	stvx	vr8,r0,r3
 err3;	stvx	vr9,r3,r9
@@ -675,7 +683,7 @@ err3;	stvx	vr9,r3,r9
 
 10:	bf	cr7*4+3,11f
 err3;	lvx	vr1,r0,r4
-	vperm	vr8,vr0,vr1,vr16
+	VPERM(vr8,vr0,vr1,vr16)
 	addi	r4,r4,16
 err3;	stvx	vr8,r0,r3
 	addi	r3,r3,16
diff --git a/arch/powerpc/lib/memcpy_power7.S b/arch/powerpc/lib/memcpy_power7.S
index 0663630baf3b..e4177dbea6bd 100644
--- a/arch/powerpc/lib/memcpy_power7.S
+++ b/arch/powerpc/lib/memcpy_power7.S
@@ -20,6 +20,15 @@
 #include <asm/ppc_asm.h>
 
 _GLOBAL(memcpy_power7)
+
+#ifdef __BIG_ENDIAN__
+#define LVS(VRT,RA,RB)		lvsl	VRT,RA,RB
+#define VPERM(VRT,VRA,VRB,VRC)	vperm	VRT,VRA,VRB,VRC
+#else
+#define LVS(VRT,RA,RB)		lvsr	VRT,RA,RB
+#define VPERM(VRT,VRA,VRB,VRC)	vperm	VRT,VRB,VRA,VRC
+#endif
+
 #ifdef CONFIG_ALTIVEC
 	cmpldi	r5,16
 	cmpldi	cr1,r5,4096
@@ -485,13 +494,13 @@ _GLOBAL(memcpy_power7)
 	li	r10,32
 	li	r11,48
 
-	lvsl	vr16,0,r4	/* Setup permute control vector */
+	LVS(vr16,0,r4)		/* Setup permute control vector */
 	lvx	vr0,0,r4
 	addi	r4,r4,16
 
 	bf	cr7*4+3,5f
 	lvx	vr1,r0,r4
-	vperm	vr8,vr0,vr1,vr16
+	VPERM(vr8,vr0,vr1,vr16)
 	addi	r4,r4,16
 	stvx	vr8,r0,r3
 	addi	r3,r3,16
@@ -499,9 +508,9 @@ _GLOBAL(memcpy_power7)
 
 5:	bf	cr7*4+2,6f
 	lvx	vr1,r0,r4
-	vperm	vr8,vr0,vr1,vr16
+	VPERM(vr8,vr0,vr1,vr16)
 	lvx	vr0,r4,r9
-	vperm	vr9,vr1,vr0,vr16
+	VPERM(vr9,vr1,vr0,vr16)
 	addi	r4,r4,32
 	stvx	vr8,r0,r3
 	stvx	vr9,r3,r9
@@ -509,13 +518,13 @@ _GLOBAL(memcpy_power7)
 
 6:	bf	cr7*4+1,7f
 	lvx	vr3,r0,r4
-	vperm	vr8,vr0,vr3,vr16
+	VPERM(vr8,vr0,vr3,vr16)
 	lvx	vr2,r4,r9
-	vperm	vr9,vr3,vr2,vr16
+	VPERM(vr9,vr3,vr2,vr16)
 	lvx	vr1,r4,r10
-	vperm	vr10,vr2,vr1,vr16
+	VPERM(vr10,vr2,vr1,vr16)
 	lvx	vr0,r4,r11
-	vperm	vr11,vr1,vr0,vr16
+	VPERM(vr11,vr1,vr0,vr16)
 	addi	r4,r4,64
 	stvx	vr8,r0,r3
 	stvx	vr9,r3,r9
@@ -544,21 +553,21 @@ _GLOBAL(memcpy_power7)
 	.align	5
 8:
 	lvx	vr7,r0,r4
-	vperm	vr8,vr0,vr7,vr16
+	VPERM(vr8,vr0,vr7,vr16)
 	lvx	vr6,r4,r9
-	vperm	vr9,vr7,vr6,vr16
+	VPERM(vr9,vr7,vr6,vr16)
 	lvx	vr5,r4,r10
-	vperm	vr10,vr6,vr5,vr16
+	VPERM(vr10,vr6,vr5,vr16)
 	lvx	vr4,r4,r11
-	vperm	vr11,vr5,vr4,vr16
+	VPERM(vr11,vr5,vr4,vr16)
 	lvx	vr3,r4,r12
-	vperm	vr12,vr4,vr3,vr16
+	VPERM(vr12,vr4,vr3,vr16)
 	lvx	vr2,r4,r14
-	vperm	vr13,vr3,vr2,vr16
+	VPERM(vr13,vr3,vr2,vr16)
 	lvx	vr1,r4,r15
-	vperm	vr14,vr2,vr1,vr16
+	VPERM(vr14,vr2,vr1,vr16)
 	lvx	vr0,r4,r16
-	vperm	vr15,vr1,vr0,vr16
+	VPERM(vr15,vr1,vr0,vr16)
 	addi	r4,r4,128
 	stvx	vr8,r0,r3
 	stvx	vr9,r3,r9
@@ -582,13 +591,13 @@ _GLOBAL(memcpy_power7)
 
 	bf	cr7*4+1,9f
 	lvx	vr3,r0,r4
-	vperm	vr8,vr0,vr3,vr16
+	VPERM(vr8,vr0,vr3,vr16)
 	lvx	vr2,r4,r9
-	vperm	vr9,vr3,vr2,vr16
+	VPERM(vr9,vr3,vr2,vr16)
 	lvx	vr1,r4,r10
-	vperm	vr10,vr2,vr1,vr16
+	VPERM(vr10,vr2,vr1,vr16)
 	lvx	vr0,r4,r11
-	vperm	vr11,vr1,vr0,vr16
+	VPERM(vr11,vr1,vr0,vr16)
 	addi	r4,r4,64
 	stvx	vr8,r0,r3
 	stvx	vr9,r3,r9
@@ -598,9 +607,9 @@ _GLOBAL(memcpy_power7)
 
 9:	bf	cr7*4+2,10f
 	lvx	vr1,r0,r4
-	vperm	vr8,vr0,vr1,vr16
+	VPERM(vr8,vr0,vr1,vr16)
 	lvx	vr0,r4,r9
-	vperm	vr9,vr1,vr0,vr16
+	VPERM(vr9,vr1,vr0,vr16)
 	addi	r4,r4,32
 	stvx	vr8,r0,r3
 	stvx	vr9,r3,r9
@@ -608,7 +617,7 @@ _GLOBAL(memcpy_power7)
 
 10:	bf	cr7*4+3,11f
 	lvx	vr1,r0,r4
-	vperm	vr8,vr0,vr1,vr16
+	VPERM(vr8,vr0,vr1,vr16)
 	addi	r4,r4,16
 	stvx	vr8,r0,r3
 	addi	r3,r3,16
-- 
cgit v1.2.3


From 12f04f2be80dd8d9da24534828f3ab3189ca5af2 Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:04:36 +1000
Subject: powerpc: Book 3S MMU little endian support

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu-hash64.h |  4 +--
 arch/powerpc/mm/hash_native_64.c      | 46 ++++++++++++++++++++---------------
 arch/powerpc/mm/hash_utils_64.c       | 38 ++++++++++++++---------------
 3 files changed, 46 insertions(+), 42 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index c4cf01197273..807014dde821 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -135,8 +135,8 @@ extern char initial_stab[];
 #ifndef __ASSEMBLY__
 
 struct hash_pte {
-	unsigned long v;
-	unsigned long r;
+	__be64 v;
+	__be64 r;
 };
 
 extern struct hash_pte *htab_address;
diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index c33d939120c9..3ea26c25590b 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -35,7 +35,11 @@
 #define DBG_LOW(fmt...)
 #endif
 
+#ifdef __BIG_ENDIAN__
 #define HPTE_LOCK_BIT 3
+#else
+#define HPTE_LOCK_BIT (56+3)
+#endif
 
 DEFINE_RAW_SPINLOCK(native_tlbie_lock);
 
@@ -172,7 +176,7 @@ static inline void tlbie(unsigned long vpn, int psize, int apsize,
 
 static inline void native_lock_hpte(struct hash_pte *hptep)
 {
-	unsigned long *word = &hptep->v;
+	unsigned long *word = (unsigned long *)&hptep->v;
 
 	while (1) {
 		if (!test_and_set_bit_lock(HPTE_LOCK_BIT, word))
@@ -184,7 +188,7 @@ static inline void native_lock_hpte(struct hash_pte *hptep)
 
 static inline void native_unlock_hpte(struct hash_pte *hptep)
 {
-	unsigned long *word = &hptep->v;
+	unsigned long *word = (unsigned long *)&hptep->v;
 
 	clear_bit_unlock(HPTE_LOCK_BIT, word);
 }
@@ -204,10 +208,10 @@ static long native_hpte_insert(unsigned long hpte_group, unsigned long vpn,
 	}
 
 	for (i = 0; i < HPTES_PER_GROUP; i++) {
-		if (! (hptep->v & HPTE_V_VALID)) {
+		if (! (be64_to_cpu(hptep->v) & HPTE_V_VALID)) {
 			/* retry with lock held */
 			native_lock_hpte(hptep);
-			if (! (hptep->v & HPTE_V_VALID))
+			if (! (be64_to_cpu(hptep->v) & HPTE_V_VALID))
 				break;
 			native_unlock_hpte(hptep);
 		}
@@ -226,14 +230,14 @@ static long native_hpte_insert(unsigned long hpte_group, unsigned long vpn,
 			i, hpte_v, hpte_r);
 	}
 
-	hptep->r = hpte_r;
+	hptep->r = cpu_to_be64(hpte_r);
 	/* Guarantee the second dword is visible before the valid bit */
 	eieio();
 	/*
 	 * Now set the first dword including the valid bit
 	 * NOTE: this also unlocks the hpte
 	 */
-	hptep->v = hpte_v;
+	hptep->v = cpu_to_be64(hpte_v);
 
 	__asm__ __volatile__ ("ptesync" : : : "memory");
 
@@ -254,12 +258,12 @@ static long native_hpte_remove(unsigned long hpte_group)
 
 	for (i = 0; i < HPTES_PER_GROUP; i++) {
 		hptep = htab_address + hpte_group + slot_offset;
-		hpte_v = hptep->v;
+		hpte_v = be64_to_cpu(hptep->v);
 
 		if ((hpte_v & HPTE_V_VALID) && !(hpte_v & HPTE_V_BOLTED)) {
 			/* retry with lock held */
 			native_lock_hpte(hptep);
-			hpte_v = hptep->v;
+			hpte_v = be64_to_cpu(hptep->v);
 			if ((hpte_v & HPTE_V_VALID)
 			    && !(hpte_v & HPTE_V_BOLTED))
 				break;
@@ -294,7 +298,7 @@ static long native_hpte_updatepp(unsigned long slot, unsigned long newpp,
 
 	native_lock_hpte(hptep);
 
-	hpte_v = hptep->v;
+	hpte_v = be64_to_cpu(hptep->v);
 	/*
 	 * We need to invalidate the TLB always because hpte_remove doesn't do
 	 * a tlb invalidate. If a hash bucket gets full, we "evict" a more/less
@@ -308,8 +312,8 @@ static long native_hpte_updatepp(unsigned long slot, unsigned long newpp,
 	} else {
 		DBG_LOW(" -> hit\n");
 		/* Update the HPTE */
-		hptep->r = (hptep->r & ~(HPTE_R_PP | HPTE_R_N)) |
-			(newpp & (HPTE_R_PP | HPTE_R_N | HPTE_R_C));
+		hptep->r = cpu_to_be64((be64_to_cpu(hptep->r) & ~(HPTE_R_PP | HPTE_R_N)) |
+			(newpp & (HPTE_R_PP | HPTE_R_N | HPTE_R_C)));
 	}
 	native_unlock_hpte(hptep);
 
@@ -334,7 +338,7 @@ static long native_hpte_find(unsigned long vpn, int psize, int ssize)
 	slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
 	for (i = 0; i < HPTES_PER_GROUP; i++) {
 		hptep = htab_address + slot;
-		hpte_v = hptep->v;
+		hpte_v = be64_to_cpu(hptep->v);
 
 		if (HPTE_V_COMPARE(hpte_v, want_v) && (hpte_v & HPTE_V_VALID))
 			/* HPTE matches */
@@ -369,8 +373,9 @@ static void native_hpte_updateboltedpp(unsigned long newpp, unsigned long ea,
 	hptep = htab_address + slot;
 
 	/* Update the HPTE */
-	hptep->r = (hptep->r & ~(HPTE_R_PP | HPTE_R_N)) |
-		(newpp & (HPTE_R_PP | HPTE_R_N));
+	hptep->r = cpu_to_be64((be64_to_cpu(hptep->r) &
+			~(HPTE_R_PP | HPTE_R_N)) |
+		(newpp & (HPTE_R_PP | HPTE_R_N)));
 	/*
 	 * Ensure it is out of the tlb too. Bolted entries base and
 	 * actual page size will be same.
@@ -392,7 +397,7 @@ static void native_hpte_invalidate(unsigned long slot, unsigned long vpn,
 
 	want_v = hpte_encode_avpn(vpn, bpsize, ssize);
 	native_lock_hpte(hptep);
-	hpte_v = hptep->v;
+	hpte_v = be64_to_cpu(hptep->v);
 
 	/*
 	 * We need to invalidate the TLB always because hpte_remove doesn't do
@@ -458,7 +463,7 @@ static void native_hugepage_invalidate(struct mm_struct *mm,
 		hptep = htab_address + slot;
 		want_v = hpte_encode_avpn(vpn, psize, ssize);
 		native_lock_hpte(hptep);
-		hpte_v = hptep->v;
+		hpte_v = be64_to_cpu(hptep->v);
 
 		/* Even if we miss, we need to invalidate the TLB */
 		if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID))
@@ -519,11 +524,12 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot,
 			int *psize, int *apsize, int *ssize, unsigned long *vpn)
 {
 	unsigned long avpn, pteg, vpi;
-	unsigned long hpte_v = hpte->v;
+	unsigned long hpte_v = be64_to_cpu(hpte->v);
+	unsigned long hpte_r = be64_to_cpu(hpte->r);
 	unsigned long vsid, seg_off;
 	int size, a_size, shift;
 	/* Look at the 8 bit LP value */
-	unsigned int lp = (hpte->r >> LP_SHIFT) & ((1 << LP_BITS) - 1);
+	unsigned int lp = (hpte_r >> LP_SHIFT) & ((1 << LP_BITS) - 1);
 
 	if (!(hpte_v & HPTE_V_LARGE)) {
 		size   = MMU_PAGE_4K;
@@ -612,7 +618,7 @@ static void native_hpte_clear(void)
 		 * running,  right?  and for crash dump, we probably
 		 * don't want to wait for a maybe bad cpu.
 		 */
-		hpte_v = hptep->v;
+		hpte_v = be64_to_cpu(hptep->v);
 
 		/*
 		 * Call __tlbie() here rather than tlbie() since we
@@ -664,7 +670,7 @@ static void native_flush_hash_range(unsigned long number, int local)
 			hptep = htab_address + slot;
 			want_v = hpte_encode_avpn(vpn, psize, ssize);
 			native_lock_hpte(hptep);
-			hpte_v = hptep->v;
+			hpte_v = be64_to_cpu(hptep->v);
 			if (!HPTE_V_COMPARE(hpte_v, want_v) ||
 			    !(hpte_v & HPTE_V_VALID))
 				native_unlock_hpte(hptep);
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index bde8b5589755..6176b3cdf579 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -251,19 +251,18 @@ static int __init htab_dt_scan_seg_sizes(unsigned long node,
 					 void *data)
 {
 	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
-	u32 *prop;
+	__be32 *prop;
 	unsigned long size = 0;
 
 	/* We are scanning "cpu" nodes only */
 	if (type == NULL || strcmp(type, "cpu") != 0)
 		return 0;
 
-	prop = (u32 *)of_get_flat_dt_prop(node, "ibm,processor-segment-sizes",
-					  &size);
+	prop = of_get_flat_dt_prop(node, "ibm,processor-segment-sizes", &size);
 	if (prop == NULL)
 		return 0;
 	for (; size >= 4; size -= 4, ++prop) {
-		if (prop[0] == 40) {
+		if (be32_to_cpu(prop[0]) == 40) {
 			DBG("1T segment support detected\n");
 			cur_cpu_spec->mmu_features |= MMU_FTR_1T_SEGMENT;
 			return 1;
@@ -307,23 +306,22 @@ static int __init htab_dt_scan_page_sizes(unsigned long node,
 					  void *data)
 {
 	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
-	u32 *prop;
+	__be32 *prop;
 	unsigned long size = 0;
 
 	/* We are scanning "cpu" nodes only */
 	if (type == NULL || strcmp(type, "cpu") != 0)
 		return 0;
 
-	prop = (u32 *)of_get_flat_dt_prop(node,
-					  "ibm,segment-page-sizes", &size);
+	prop = of_get_flat_dt_prop(node, "ibm,segment-page-sizes", &size);
 	if (prop != NULL) {
 		pr_info("Page sizes from device-tree:\n");
 		size /= 4;
 		cur_cpu_spec->mmu_features &= ~(MMU_FTR_16M_PAGE);
 		while(size > 0) {
-			unsigned int base_shift = prop[0];
-			unsigned int slbenc = prop[1];
-			unsigned int lpnum = prop[2];
+			unsigned int base_shift = be32_to_cpu(prop[0]);
+			unsigned int slbenc = be32_to_cpu(prop[1]);
+			unsigned int lpnum = be32_to_cpu(prop[2]);
 			struct mmu_psize_def *def;
 			int idx, base_idx;
 
@@ -356,8 +354,8 @@ static int __init htab_dt_scan_page_sizes(unsigned long node,
 				def->tlbiel = 0;
 
 			while (size > 0 && lpnum) {
-				unsigned int shift = prop[0];
-				int penc  = prop[1];
+				unsigned int shift = be32_to_cpu(prop[0]);
+				int penc  = be32_to_cpu(prop[1]);
 
 				prop += 2; size -= 2;
 				lpnum--;
@@ -390,8 +388,8 @@ static int __init htab_dt_scan_hugepage_blocks(unsigned long node,
 					const char *uname, int depth,
 					void *data) {
 	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
-	unsigned long *addr_prop;
-	u32 *page_count_prop;
+	__be64 *addr_prop;
+	__be32 *page_count_prop;
 	unsigned int expected_pages;
 	long unsigned int phys_addr;
 	long unsigned int block_size;
@@ -405,12 +403,12 @@ static int __init htab_dt_scan_hugepage_blocks(unsigned long node,
 	page_count_prop = of_get_flat_dt_prop(node, "ibm,expected#pages", NULL);
 	if (page_count_prop == NULL)
 		return 0;
-	expected_pages = (1 << page_count_prop[0]);
+	expected_pages = (1 << be32_to_cpu(page_count_prop[0]));
 	addr_prop = of_get_flat_dt_prop(node, "reg", NULL);
 	if (addr_prop == NULL)
 		return 0;
-	phys_addr = addr_prop[0];
-	block_size = addr_prop[1];
+	phys_addr = be64_to_cpu(addr_prop[0]);
+	block_size = be64_to_cpu(addr_prop[1]);
 	if (block_size != (16 * GB))
 		return 0;
 	printk(KERN_INFO "Huge page(16GB) memory: "
@@ -534,16 +532,16 @@ static int __init htab_dt_scan_pftsize(unsigned long node,
 				       void *data)
 {
 	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
-	u32 *prop;
+	__be32 *prop;
 
 	/* We are scanning "cpu" nodes only */
 	if (type == NULL || strcmp(type, "cpu") != 0)
 		return 0;
 
-	prop = (u32 *)of_get_flat_dt_prop(node, "ibm,pft-size", NULL);
+	prop = of_get_flat_dt_prop(node, "ibm,pft-size", NULL);
 	if (prop != NULL) {
 		/* pft_size[0] is the NUMA CEC cookie */
-		ppc64_pft_size = prop[1];
+		ppc64_pft_size = be32_to_cpu(prop[1]);
 		return 1;
 	}
 	return 0;
-- 
cgit v1.2.3


From e156bd8ad76939a9bcd66d85cf06f8cde1fb8030 Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:04:37 +1000
Subject: powerpc: Fix offset of FPRs in VSX registers in little endian builds

The FPRs overlap the high doublewords of the first 32 VSX registers.
Fix TS_FPROFFSET and TS_VSRLOWOFFSET so we access the correct fields
in little endian mode.

If VSX is disabled the FPRs are only one doubleword in length so
TS_FPROFFSET needs adjusting in little endian.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/processor.h | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index ce4de5aed7b5..82c6ee9df9a1 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -14,8 +14,18 @@
 
 #ifdef CONFIG_VSX
 #define TS_FPRWIDTH 2
+
+#ifdef __BIG_ENDIAN__
+#define TS_FPROFFSET 0
+#define TS_VSRLOWOFFSET 1
+#else
+#define TS_FPROFFSET 1
+#define TS_VSRLOWOFFSET 0
+#endif
+
 #else
 #define TS_FPRWIDTH 1
+#define TS_FPROFFSET 0
 #endif
 
 #ifdef CONFIG_PPC64
@@ -142,8 +152,6 @@ typedef struct {
 	unsigned long seg;
 } mm_segment_t;
 
-#define TS_FPROFFSET 0
-#define TS_VSRLOWOFFSET 1
 #define TS_FPR(i) fpr[i][TS_FPROFFSET]
 #define TS_TRANS_FPR(i) transact_fpr[i][TS_FPROFFSET]
 
-- 
cgit v1.2.3


From 87fec0514f613f8ac43c01b0bc0bc7072c5d10ae Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:04:38 +1000
Subject: powerpc: PTRACE_PEEKUSR/PTRACE_POKEUSER of FPR registers in little
 endian builds

FPRs overlap the high 64bits of the first 32 VSX registers. The
ptrace FP read/write code assumes big endian ordering and grabs
the lowest 64 bits.

Fix this by using the TS_FPR macro which does the right thing.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/ptrace.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 9a0d24c390a3..8d5d4e921a5e 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -1554,8 +1554,8 @@ long arch_ptrace(struct task_struct *child, long request,
 
 			flush_fp_to_thread(child);
 			if (fpidx < (PT_FPSCR - PT_FPR0))
-				tmp = ((unsigned long *)child->thread.fpr)
-					[fpidx * TS_FPRWIDTH];
+				memcpy(&tmp, &child->thread.TS_FPR(fpidx),
+				       sizeof(long));
 			else
 				tmp = child->thread.fpscr.val;
 		}
@@ -1587,8 +1587,8 @@ long arch_ptrace(struct task_struct *child, long request,
 
 			flush_fp_to_thread(child);
 			if (fpidx < (PT_FPSCR - PT_FPR0))
-				((unsigned long *)child->thread.fpr)
-					[fpidx * TS_FPRWIDTH] = data;
+				memcpy(&child->thread.TS_FPR(fpidx), &data,
+				       sizeof(long));
 			else
 				child->thread.fpscr.val = data;
 			ret = 0;
-- 
cgit v1.2.3


From 926f160f460170b0361f600f365369685ad74009 Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:04:39 +1000
Subject: powerpc: Little endian builds double word swap VSX state during
 context save/restore

The elements within VSX loads and stores are big endian ordered
regardless of endianness. Our VSX context save/restore code uses
lxvd2x and stxvd2x which is a 2x doubleword operation. This means
the two doublewords will be swapped and we have to perform another
swap to undo it.

We need to do this on save and restore.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/ppc-opcode.h |  3 +++
 arch/powerpc/include/asm/ppc_asm.h    | 21 +++++++++++++++++----
 2 files changed, 20 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index d7fe9f5b46d4..ad5fcf51b252 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -181,6 +181,7 @@
 #define PPC_INST_TLBIVAX		0x7c000624
 #define PPC_INST_TLBSRX_DOT		0x7c0006a5
 #define PPC_INST_XXLOR			0xf0000510
+#define PPC_INST_XXSWAPD		0xf0000250
 #define PPC_INST_XVCPSGNDP		0xf0000780
 #define PPC_INST_TRECHKPT		0x7c0007dd
 #define PPC_INST_TRECLAIM		0x7c00075d
@@ -344,6 +345,8 @@
 					       VSX_XX1((s), a, b))
 #define XXLOR(t, a, b)		stringify_in_c(.long PPC_INST_XXLOR | \
 					       VSX_XX3((t), a, b))
+#define XXSWAPD(t, a)		stringify_in_c(.long PPC_INST_XXSWAPD | \
+					       VSX_XX3((t), a, a))
 #define XVCPSGNDP(t, a, b)	stringify_in_c(.long (PPC_INST_XVCPSGNDP | \
 					       VSX_XX3((t), (a), (b))))
 
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 599545738af3..0c51fb4fd2aa 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -180,9 +180,20 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
 #define REST_32VRS_TRANSACT(n,b,base)	REST_16VRS_TRANSACT(n,b,base);	\
 					REST_16VRS_TRANSACT(n+16,b,base)
 
+#ifdef __BIG_ENDIAN__
+#define STXVD2X_ROT(n,b,base)		STXVD2X(n,b,base)
+#define LXVD2X_ROT(n,b,base)		LXVD2X(n,b,base)
+#else
+#define STXVD2X_ROT(n,b,base)		XXSWAPD(n,n);		\
+					STXVD2X(n,b,base);	\
+					XXSWAPD(n,n)
+
+#define LXVD2X_ROT(n,b,base)		LXVD2X(n,b,base);	\
+					XXSWAPD(n,n)
+#endif
 
 #define SAVE_VSR_TRANSACT(n,b,base)	li b,THREAD_TRANSACT_VSR0+(16*(n)); \
-					STXVD2X(n,R##base,R##b)
+					STXVD2X_ROT(n,R##base,R##b)
 #define SAVE_2VSRS_TRANSACT(n,b,base)	SAVE_VSR_TRANSACT(n,b,base);	\
 	                                SAVE_VSR_TRANSACT(n+1,b,base)
 #define SAVE_4VSRS_TRANSACT(n,b,base)	SAVE_2VSRS_TRANSACT(n,b,base);	\
@@ -195,7 +206,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
 	                                SAVE_16VSRS_TRANSACT(n+16,b,base)
 
 #define REST_VSR_TRANSACT(n,b,base)	li b,THREAD_TRANSACT_VSR0+(16*(n)); \
-					LXVD2X(n,R##base,R##b)
+					LXVD2X_ROT(n,R##base,R##b)
 #define REST_2VSRS_TRANSACT(n,b,base)	REST_VSR_TRANSACT(n,b,base);    \
 	                                REST_VSR_TRANSACT(n+1,b,base)
 #define REST_4VSRS_TRANSACT(n,b,base)	REST_2VSRS_TRANSACT(n,b,base);	\
@@ -208,13 +219,15 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
 	                                REST_16VSRS_TRANSACT(n+16,b,base)
 
 /* Save the lower 32 VSRs in the thread VSR region */
-#define SAVE_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n));  STXVD2X(n,R##base,R##b)
+#define SAVE_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n)); \
+				STXVD2X_ROT(n,R##base,R##b)
 #define SAVE_2VSRS(n,b,base)	SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base)
 #define SAVE_4VSRS(n,b,base)	SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base)
 #define SAVE_8VSRS(n,b,base)	SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base)
 #define SAVE_16VSRS(n,b,base)	SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base)
 #define SAVE_32VSRS(n,b,base)	SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base)
-#define REST_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n)); LXVD2X(n,R##base,R##b)
+#define REST_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n)); \
+				LXVD2X_ROT(n,R##base,R##b)
 #define REST_2VSRS(n,b,base)	REST_VSR(n,b,base); REST_VSR(n+1,b,base)
 #define REST_4VSRS(n,b,base)	REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base)
 #define REST_8VSRS(n,b,base)	REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
-- 
cgit v1.2.3


From 15cba23e69435c86197d6e5035445469ca2b8484 Mon Sep 17 00:00:00 2001
From: Ian Munsie
Date: Mon, 23 Sep 2013 12:04:40 +1000
Subject: powerpc: Support endian agnostic MMIO

This patch maps the MMIO functions for 32bit PowerPC to their
appropriate instructions depending on CPU endianness.

The macros used to create the corresponding inline functions are also
renamed by this patch. Previously they had BE or LE in their names which
was misleading - they had nothing to do with endianness, but actually
created different instruction forms so their new names reflect the
instruction form they are creating (D-Form and X-Form).

Little endian 64bit PowerPC is not supported, so the lack of mappings
(and corresponding breakage) for that case is intentional to bring the
attention of anyone doing a 64bit little endian port. 64bit big endian
is unaffected.

[ Added 64 bit versions - Anton ]

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/io.h | 67 +++++++++++++++++++++++++++++++------------
 1 file changed, 49 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 5a64757dc0d1..db1f29673c06 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -113,7 +113,7 @@ extern bool isa_io_special;
 
 /* gcc 4.0 and older doesn't have 'Z' constraint */
 #if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ == 0)
-#define DEF_MMIO_IN_LE(name, size, insn)				\
+#define DEF_MMIO_IN_X(name, size, insn)				\
 static inline u##size name(const volatile u##size __iomem *addr)	\
 {									\
 	u##size ret;							\
@@ -122,7 +122,7 @@ static inline u##size name(const volatile u##size __iomem *addr)	\
 	return ret;							\
 }
 
-#define DEF_MMIO_OUT_LE(name, size, insn) 				\
+#define DEF_MMIO_OUT_X(name, size, insn)				\
 static inline void name(volatile u##size __iomem *addr, u##size val)	\
 {									\
 	__asm__ __volatile__("sync;"#insn" %1,0,%2"			\
@@ -130,7 +130,7 @@ static inline void name(volatile u##size __iomem *addr, u##size val)	\
 	IO_SET_SYNC_FLAG();						\
 }
 #else /* newer gcc */
-#define DEF_MMIO_IN_LE(name, size, insn)				\
+#define DEF_MMIO_IN_X(name, size, insn)				\
 static inline u##size name(const volatile u##size __iomem *addr)	\
 {									\
 	u##size ret;							\
@@ -139,7 +139,7 @@ static inline u##size name(const volatile u##size __iomem *addr)	\
 	return ret;							\
 }
 
-#define DEF_MMIO_OUT_LE(name, size, insn) 				\
+#define DEF_MMIO_OUT_X(name, size, insn)				\
 static inline void name(volatile u##size __iomem *addr, u##size val)	\
 {									\
 	__asm__ __volatile__("sync;"#insn" %1,%y0"			\
@@ -148,7 +148,7 @@ static inline void name(volatile u##size __iomem *addr, u##size val)	\
 }
 #endif
 
-#define DEF_MMIO_IN_BE(name, size, insn)				\
+#define DEF_MMIO_IN_D(name, size, insn)				\
 static inline u##size name(const volatile u##size __iomem *addr)	\
 {									\
 	u##size ret;							\
@@ -157,7 +157,7 @@ static inline u##size name(const volatile u##size __iomem *addr)	\
 	return ret;							\
 }
 
-#define DEF_MMIO_OUT_BE(name, size, insn)				\
+#define DEF_MMIO_OUT_D(name, size, insn)				\
 static inline void name(volatile u##size __iomem *addr, u##size val)	\
 {									\
 	__asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0"			\
@@ -165,22 +165,37 @@ static inline void name(volatile u##size __iomem *addr, u##size val)	\
 	IO_SET_SYNC_FLAG();						\
 }
 
+DEF_MMIO_IN_D(in_8,     8, lbz);
+DEF_MMIO_OUT_D(out_8,   8, stb);
 
-DEF_MMIO_IN_BE(in_8,     8, lbz);
-DEF_MMIO_IN_BE(in_be16, 16, lhz);
-DEF_MMIO_IN_BE(in_be32, 32, lwz);
-DEF_MMIO_IN_LE(in_le16, 16, lhbrx);
-DEF_MMIO_IN_LE(in_le32, 32, lwbrx);
+#ifdef __BIG_ENDIAN__
+DEF_MMIO_IN_D(in_be16, 16, lhz);
+DEF_MMIO_IN_D(in_be32, 32, lwz);
+DEF_MMIO_IN_X(in_le16, 16, lhbrx);
+DEF_MMIO_IN_X(in_le32, 32, lwbrx);
 
-DEF_MMIO_OUT_BE(out_8,     8, stb);
-DEF_MMIO_OUT_BE(out_be16, 16, sth);
-DEF_MMIO_OUT_BE(out_be32, 32, stw);
-DEF_MMIO_OUT_LE(out_le16, 16, sthbrx);
-DEF_MMIO_OUT_LE(out_le32, 32, stwbrx);
+DEF_MMIO_OUT_D(out_be16, 16, sth);
+DEF_MMIO_OUT_D(out_be32, 32, stw);
+DEF_MMIO_OUT_X(out_le16, 16, sthbrx);
+DEF_MMIO_OUT_X(out_le32, 32, stwbrx);
+#else
+DEF_MMIO_IN_X(in_be16, 16, lhbrx);
+DEF_MMIO_IN_X(in_be32, 32, lwbrx);
+DEF_MMIO_IN_D(in_le16, 16, lhz);
+DEF_MMIO_IN_D(in_le32, 32, lwz);
+
+DEF_MMIO_OUT_X(out_be16, 16, sthbrx);
+DEF_MMIO_OUT_X(out_be32, 32, stwbrx);
+DEF_MMIO_OUT_D(out_le16, 16, sth);
+DEF_MMIO_OUT_D(out_le32, 32, stw);
+
+#endif /* __BIG_ENDIAN */
 
 #ifdef __powerpc64__
-DEF_MMIO_OUT_BE(out_be64, 64, std);
-DEF_MMIO_IN_BE(in_be64, 64, ld);
+
+#ifdef __BIG_ENDIAN__
+DEF_MMIO_OUT_D(out_be64, 64, std);
+DEF_MMIO_IN_D(in_be64, 64, ld);
 
 /* There is no asm instructions for 64 bits reverse loads and stores */
 static inline u64 in_le64(const volatile u64 __iomem *addr)
@@ -192,6 +207,22 @@ static inline void out_le64(volatile u64 __iomem *addr, u64 val)
 {
 	out_be64(addr, swab64(val));
 }
+#else
+DEF_MMIO_OUT_D(out_le64, 64, std);
+DEF_MMIO_IN_D(in_le64, 64, ld);
+
+/* There is no asm instructions for 64 bits reverse loads and stores */
+static inline u64 in_be64(const volatile u64 __iomem *addr)
+{
+	return swab64(in_le64(addr));
+}
+
+static inline void out_be64(volatile u64 __iomem *addr, u64 val)
+{
+	out_le64(addr, swab64(val));
+}
+
+#endif
 #endif /* __powerpc64__ */
 
 /*
-- 
cgit v1.2.3


From 4c74c330c2d84aec9f2b4e87827b08814c266b6b Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:04:41 +1000
Subject: powerpc: Add little endian support for word-at-a-time functions

The powerpc word-at-a-time functions are big endian specific.
Bring in the x86 version in order to support little endian builds.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/word-at-a-time.h | 71 +++++++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/word-at-a-time.h b/arch/powerpc/include/asm/word-at-a-time.h
index d0b6d4ac6dda..213a5f2b0717 100644
--- a/arch/powerpc/include/asm/word-at-a-time.h
+++ b/arch/powerpc/include/asm/word-at-a-time.h
@@ -8,6 +8,8 @@
 #include <linux/kernel.h>
 #include <asm/asm-compat.h>
 
+#ifdef __BIG_ENDIAN__
+
 struct word_at_a_time {
 	const unsigned long high_bits, low_bits;
 };
@@ -38,4 +40,73 @@ static inline bool has_zero(unsigned long val, unsigned long *data, const struct
 	return (val + c->high_bits) & ~rhs;
 }
 
+#else
+
+/*
+ * This is largely generic for little-endian machines, but the
+ * optimal byte mask counting is probably going to be something
+ * that is architecture-specific. If you have a reliably fast
+ * bit count instruction, that might be better than the multiply
+ * and shift, for example.
+ */
+struct word_at_a_time {
+	const unsigned long one_bits, high_bits;
+};
+
+#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) }
+
+#ifdef CONFIG_64BIT
+
+/*
+ * Jan Achrenius on G+: microoptimized version of
+ * the simpler "(mask & ONEBYTES) * ONEBYTES >> 56"
+ * that works for the bytemasks without having to
+ * mask them first.
+ */
+static inline long count_masked_bytes(unsigned long mask)
+{
+	return mask*0x0001020304050608ul >> 56;
+}
+
+#else	/* 32-bit case */
+
+/* Carl Chatfield / Jan Achrenius G+ version for 32-bit */
+static inline long count_masked_bytes(long mask)
+{
+	/* (000000 0000ff 00ffff ffffff) -> ( 1 1 2 3 ) */
+	long a = (0x0ff0001+mask) >> 23;
+	/* Fix the 1 for 00 case */
+	return a & mask;
+}
+
+#endif
+
+/* Return nonzero if it has a zero */
+static inline unsigned long has_zero(unsigned long a, unsigned long *bits, const struct word_at_a_time *c)
+{
+	unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits;
+	*bits = mask;
+	return mask;
+}
+
+static inline unsigned long prep_zero_mask(unsigned long a, unsigned long bits, const struct word_at_a_time *c)
+{
+	return bits;
+}
+
+static inline unsigned long create_zero_mask(unsigned long bits)
+{
+	bits = (bits - 1) & ~bits;
+	return bits >> 7;
+}
+
+/* The mask we created is directly usable as a bytemask */
+#define zero_bytemask(mask) (mask)
+
+static inline unsigned long find_zero(unsigned long mask)
+{
+	return count_masked_bytes(mask);
+}
+#endif
+
 #endif /* _ASM_WORD_AT_A_TIME_H */
-- 
cgit v1.2.3


From ef1967ff875d58c290108f9c6872a53a79855c4b Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:04:42 +1000
Subject: powerpc: Set MSR_LE bit on little endian builds

We need to set MSR_LE in kernel and userspace for little endian builds

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/reg.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 10d1ef016bf1..126f6e98f84d 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -115,7 +115,12 @@
 #define MSR_64BIT	MSR_SF
 
 /* Server variant */
-#define MSR_		(MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV)
+#define __MSR		(MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV)
+#ifdef __BIG_ENDIAN__
+#define MSR_		__MSR
+#else
+#define MSR_		(__MSR | MSR_LE)
+#endif
 #define MSR_KERNEL	(MSR_ | MSR_64BIT)
 #define MSR_USER32	(MSR_ | MSR_PR | MSR_EE)
 #define MSR_USER64	(MSR_USER32 | MSR_64BIT)
-- 
cgit v1.2.3


From e871c6bbf66c1b44af0fb925427e957301e2e1ff Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:04:43 +1000
Subject: powerpc: Reset MSR_LE on signal entry

We always take signals in big endian which is wrong. Signals
should be taken in native endian.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/signal_32.c | 3 ++-
 arch/powerpc/kernel/signal_64.c | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index bebdf1a1a540..b386b0be8d02 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -1045,8 +1045,9 @@ int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka,
 	regs->gpr[5] = (unsigned long) &rt_sf->uc;
 	regs->gpr[6] = (unsigned long) rt_sf;
 	regs->nip = (unsigned long) ka->sa.sa_handler;
-	/* enter the signal handler in big-endian mode */
+	/* enter the signal handler in native-endian mode */
 	regs->msr &= ~MSR_LE;
+	regs->msr |= (MSR_KERNEL & MSR_LE);
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 	/* Remove TM bits from thread's MSR.  The MSR in the sigcontext
 	 * just indicates to userland that we were doing a transaction, but we
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index f93ec2835a13..8b51b0278106 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -773,8 +773,9 @@ int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info,
 
 	/* Set up "regs" so we "return" to the signal handler. */
 	err |= get_user(regs->nip, &funct_desc_ptr->entry);
-	/* enter the signal handler in big-endian mode */
+	/* enter the signal handler in native-endian mode */
 	regs->msr &= ~MSR_LE;
+	regs->msr |= (MSR_KERNEL & MSR_LE);
 	regs->gpr[1] = newsp;
 	err |= get_user(regs->gpr[2], &funct_desc_ptr->toc);
 	regs->gpr[3] = signr;
-- 
cgit v1.2.3


From c57a5ce0df04be61bafedc0f3043d568103c7ab5 Mon Sep 17 00:00:00 2001
From: Ian Munsie
Date: Mon, 23 Sep 2013 12:04:44 +1000
Subject: powerpc: Include the appropriate endianness header

This patch will have powerpc include the appropriate generic endianness
header depending on what the compiler reports.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/uapi/asm/byteorder.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/uapi/asm/byteorder.h b/arch/powerpc/include/uapi/asm/byteorder.h
index aa6cc4fac965..ca931d074000 100644
--- a/arch/powerpc/include/uapi/asm/byteorder.h
+++ b/arch/powerpc/include/uapi/asm/byteorder.h
@@ -7,6 +7,10 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
+#ifdef __LITTLE_ENDIAN__
+#include <linux/byteorder/little_endian.h>
+#else
 #include <linux/byteorder/big_endian.h>
+#endif
 
 #endif /* _ASM_POWERPC_BYTEORDER_H */
-- 
cgit v1.2.3


From 5c0484e25ec03243d4c2f2d4416d4a13efc77f6a Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Mon, 23 Sep 2013 12:04:45 +1000
Subject: powerpc: Endian safe trampoline

Create a trampoline that works in either endian and flips to
the expected endian. Use it for primary and secondary thread
entry as well as RTAS and OF call return.

Credit for finding the magic instruction goes to Paul Mackerras

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/ppc_asm.h | 31 ++++++++++++++++++++++++++++++-
 arch/powerpc/kernel/entry_64.S     | 36 ++++++++++++++++++++----------------
 arch/powerpc/kernel/head_64.S      |  3 +++
 3 files changed, 53 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 0c51fb4fd2aa..ce05bba0bfc6 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -845,6 +845,35 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,946)
 #define N_SLINE	68
 #define N_SO	100
 
-#endif /*  __ASSEMBLY__ */
+/*
+ * Create an endian fixup trampoline
+ *
+ * This starts with a "tdi 0,0,0x48" instruction which is
+ * essentially a "trap never", and thus akin to a nop.
+ *
+ * The opcode for this instruction read with the wrong endian
+ * however results in a b . + 8
+ *
+ * So essentially we use that trick to execute the following
+ * trampoline in "reverse endian" if we are running with the
+ * MSR_LE bit set the "wrong" way for whatever endianness the
+ * kernel is built for.
+ */
 
+#ifdef CONFIG_PPC_BOOK3E
+#define FIXUP_ENDIAN
+#else
+#define FIXUP_ENDIAN						   \
+	tdi   0,0,0x48;	  /* Reverse endian of b . + 8		*/ \
+	b     $+36;	  /* Skip trampoline if endian is good	*/ \
+	.long 0x05009f42; /* bcl 20,31,$+4			*/ \
+	.long 0xa602487d; /* mflr r10				*/ \
+	.long 0x1c004a39; /* addi r10,r10,28			*/ \
+	.long 0xa600607d; /* mfmsr r11				*/ \
+	.long 0x01006b69; /* xori r11,r11,1			*/ \
+	.long 0xa6035a7d; /* mtsrr0 r10				*/ \
+	.long 0xa6037b7d; /* mtsrr1 r11				*/ \
+	.long 0x2400004c  /* rfid				*/
+#endif /* !CONFIG_PPC_BOOK3E */
+#endif /*  __ASSEMBLY__ */
 #endif /* _ASM_POWERPC_PPC_ASM_H */
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index c04cdf70d487..889ea2b19383 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -1017,7 +1017,7 @@ _GLOBAL(enter_rtas)
 	
         li      r9,1
         rldicr  r9,r9,MSR_SF_LG,(63-MSR_SF_LG)
-	ori	r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP|MSR_RI
+	ori	r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP|MSR_RI|MSR_LE
 	andc	r6,r0,r9
 	sync				/* disable interrupts so SRR0/1 */
 	mtmsrd	r0			/* don't get trashed */
@@ -1032,6 +1032,8 @@ _GLOBAL(enter_rtas)
 	b	.	/* prevent speculative execution */
 
 _STATIC(rtas_return_loc)
+	FIXUP_ENDIAN
+
 	/* relocation is off at this point */
 	GET_PACA(r4)
 	clrldi	r4,r4,2			/* convert to realmode address */
@@ -1103,28 +1105,30 @@ _GLOBAL(enter_prom)
 	std	r10,_CCR(r1)
 	std	r11,_MSR(r1)
 
-	/* Get the PROM entrypoint */
-	mtlr	r4
+	/* Put PROM address in SRR0 */
+	mtsrr0	r4
+
+	/* Setup our trampoline return addr in LR */
+	bcl	20,31,$+4
+0:	mflr	r4
+	addi	r4,r4,(1f - 0b)
+       	mtlr	r4
 
-	/* Switch MSR to 32 bits mode
+	/* Prepare a 32-bit mode big endian MSR
 	 */
 #ifdef CONFIG_PPC_BOOK3E
 	rlwinm	r11,r11,0,1,31
-	mtmsr	r11
+	mtsrr1	r11
+	rfi
 #else /* CONFIG_PPC_BOOK3E */
-        mfmsr   r11
-        li      r12,1
-        rldicr  r12,r12,MSR_SF_LG,(63-MSR_SF_LG)
-        andc    r11,r11,r12
-        li      r12,1
-        rldicr  r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG)
-        andc    r11,r11,r12
-        mtmsrd  r11
+	LOAD_REG_IMMEDIATE(r12, MSR_SF | MSR_ISF | MSR_LE)
+	andc	r11,r11,r12
+	mtsrr1	r11
+	rfid
 #endif /* CONFIG_PPC_BOOK3E */
-        isync
 
-	/* Enter PROM here... */
-	blrl
+1:	/* Return from OF */
+	FIXUP_ENDIAN
 
 	/* Just make sure that r1 top 32 bits didn't get
 	 * corrupt by OF
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 3d11d8038dee..2ae41aba4053 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -68,6 +68,7 @@ _stext:
 _GLOBAL(__start)
 	/* NOP this out unconditionally */
 BEGIN_FTR_SECTION
+	FIXUP_ENDIAN
 	b	.__start_initialization_multiplatform
 END_FTR_SECTION(0, 1)
 
@@ -115,6 +116,7 @@ __run_at_load:
  */
 	.globl	__secondary_hold
 __secondary_hold:
+	FIXUP_ENDIAN
 #ifndef CONFIG_PPC_BOOK3E
 	mfmsr	r24
 	ori	r24,r24,MSR_RI
@@ -205,6 +207,7 @@ _GLOBAL(generic_secondary_thread_init)
  * as SCOM before entry).
  */
 _GLOBAL(generic_secondary_smp_init)
+	FIXUP_ENDIAN
 	mr	r24,r3
 	mr	r25,r4
 
-- 
cgit v1.2.3


From f626190d27a8525fbb6e3a72831e177c092f8a44 Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:04:46 +1000
Subject: powerpc: Remove open coded byte swap macro in alignment handler

Use swab64/32/16 instead of open coding it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/align.c | 36 ++++++++++++------------------------
 1 file changed, 12 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index a27ccd5dc6b9..af830dfe98b5 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -54,8 +54,6 @@ struct aligninfo {
 /* DSISR bits reported for a DCBZ instruction: */
 #define DCBZ	0x5f	/* 8xx/82xx dcbz faults when cache not enabled */
 
-#define SWAP(a, b)	(t = (a), (a) = (b), (b) = t)
-
 /*
  * The PowerPC stores certain bits of the instruction that caused the
  * alignment exception in the DSISR register.  This array maps those
@@ -458,7 +456,7 @@ static struct aligninfo spe_aligninfo[32] = {
 static int emulate_spe(struct pt_regs *regs, unsigned int reg,
 		       unsigned int instr)
 {
-	int t, ret;
+	int ret;
 	union {
 		u64 ll;
 		u32 w[2];
@@ -581,24 +579,18 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg,
 	if (flags & SW) {
 		switch (flags & 0xf0) {
 		case E8:
-			SWAP(data.v[0], data.v[7]);
-			SWAP(data.v[1], data.v[6]);
-			SWAP(data.v[2], data.v[5]);
-			SWAP(data.v[3], data.v[4]);
+			data.ll = swab64(data.ll);
 			break;
 		case E4:
-
-			SWAP(data.v[0], data.v[3]);
-			SWAP(data.v[1], data.v[2]);
-			SWAP(data.v[4], data.v[7]);
-			SWAP(data.v[5], data.v[6]);
+			data.w[0] = swab32(data.w[0]);
+			data.w[1] = swab32(data.w[1]);
 			break;
 		/* Its half word endian */
 		default:
-			SWAP(data.v[0], data.v[1]);
-			SWAP(data.v[2], data.v[3]);
-			SWAP(data.v[4], data.v[5]);
-			SWAP(data.v[6], data.v[7]);
+			data.h[0] = swab16(data.h[0]);
+			data.h[1] = swab16(data.h[1]);
+			data.h[2] = swab16(data.h[2]);
+			data.h[3] = swab16(data.h[3]);
 			break;
 		}
 	}
@@ -710,7 +702,7 @@ int fix_alignment(struct pt_regs *regs)
 	unsigned int dsisr;
 	unsigned char __user *addr;
 	unsigned long p, swiz;
-	int ret, t;
+	int ret;
 	union {
 		u64 ll;
 		double dd;
@@ -915,17 +907,13 @@ int fix_alignment(struct pt_regs *regs)
 	if (flags & SW) {
 		switch (nb) {
 		case 8:
-			SWAP(data.v[0], data.v[7]);
-			SWAP(data.v[1], data.v[6]);
-			SWAP(data.v[2], data.v[5]);
-			SWAP(data.v[3], data.v[4]);
+			data.ll = swab64(data.ll);
 			break;
 		case 4:
-			SWAP(data.v[4], data.v[7]);
-			SWAP(data.v[5], data.v[6]);
+			data.x32.low32 = swab32(data.x32.low32);
 			break;
 		case 2:
-			SWAP(data.v[6], data.v[7]);
+			data.x16.low16 = swab16(data.x16.low16);
 			break;
 		}
 	}
-- 
cgit v1.2.3


From c324496456208e4a6a377d8a36b8fad76d004c7f Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:04:47 +1000
Subject: powerpc: Remove hard coded FP offsets in alignment handler

The alignment handler assumes big endian ordering when selecting
the low word of a 64bit floating point value. Use the existing
union which works in both little and big endian.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/align.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index af830dfe98b5..25d8d8b4eaf9 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -895,7 +895,7 @@ int fix_alignment(struct pt_regs *regs)
 #ifdef CONFIG_PPC_FPU
 			preempt_disable();
 			enable_kernel_fp();
-			cvt_df(&data.dd, (float *)&data.v[4]);
+			cvt_df(&data.dd, (float *)&data.x32.low32);
 			preempt_enable();
 #else
 			return 0;
@@ -935,7 +935,7 @@ int fix_alignment(struct pt_regs *regs)
 #ifdef CONFIG_PPC_FPU
 		preempt_disable();
 		enable_kernel_fp();
-		cvt_fd((float *)&data.v[4], &data.dd);
+		cvt_fd((float *)&data.x32.low32, &data.dd);
 		preempt_enable();
 #else
 		return 0;
-- 
cgit v1.2.3


From a5841a46022e1ebe97d4c926c32ef4e9acec96a7 Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:04:48 +1000
Subject: powerpc: Alignment handler shouldn't access VSX registers with TS_FPR

The TS_FPR macro selects the FPR component of a VSX register (the
high doubleword). emulate_vsx is using this macro to get the
address of the associated VSX register. This happens to work on big
endian, but fails on little endian.

Replace it with an explicit array access.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/align.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index 25d8d8b4eaf9..3049bd00e757 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -650,7 +650,7 @@ static int emulate_vsx(unsigned char __user *addr, unsigned int reg,
 	flush_vsx_to_thread(current);
 
 	if (reg < 32)
-		ptr = (char *) &current->thread.TS_FPR(reg);
+		ptr = (char *) &current->thread.fpr[reg][0];
 	else
 		ptr = (char *) &current->thread.vr[reg - 32];
 
-- 
cgit v1.2.3


From 835e206a67703f8cfb9f13ffc90d5fe5a374f40c Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:04:49 +1000
Subject: powerpc: Add little endian support to alignment handler

Handle most unaligned load and store faults in little
endian mode. Strings, multiples and VSX are not supported.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/align.c | 93 ++++++++++++++++++++++++++++++---------------
 1 file changed, 63 insertions(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index 3049bd00e757..cce82b1e0374 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -262,6 +262,7 @@ static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr)
 
 #define SWIZ_PTR(p)		((unsigned char __user *)((p) ^ swiz))
 
+#ifdef __BIG_ENDIAN__
 static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
 			    unsigned int reg, unsigned int nb,
 			    unsigned int flags, unsigned int instr,
@@ -390,6 +391,7 @@ static int emulate_fp_pair(unsigned char __user *addr, unsigned int reg,
 		return -EFAULT;
 	return 1;	/* exception handled and fixed up */
 }
+#endif
 
 #ifdef CONFIG_SPE
 
@@ -628,7 +630,7 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg,
 }
 #endif /* CONFIG_SPE */
 
-#ifdef CONFIG_VSX
+#if defined(CONFIG_VSX) && defined(__BIG_ENDIAN__)
 /*
  * Emulate VSX instructions...
  */
@@ -702,18 +704,28 @@ int fix_alignment(struct pt_regs *regs)
 	unsigned int dsisr;
 	unsigned char __user *addr;
 	unsigned long p, swiz;
-	int ret;
-	union {
+	int ret, i;
+	union data {
 		u64 ll;
 		double dd;
 		unsigned char v[8];
 		struct {
+#ifdef __LITTLE_ENDIAN__
+			int	 low32;
+			unsigned hi32;
+#else
 			unsigned hi32;
 			int	 low32;
+#endif
 		} x32;
 		struct {
+#ifdef __LITTLE_ENDIAN__
+			short	      low16;
+			unsigned char hi48[6];
+#else
 			unsigned char hi48[6];
 			short	      low16;
+#endif
 		} x16;
 	} data;
 
@@ -772,8 +784,9 @@ int fix_alignment(struct pt_regs *regs)
 
 	/* Byteswap little endian loads and stores */
 	swiz = 0;
-	if (regs->msr & MSR_LE) {
+	if ((regs->msr & MSR_LE) != (MSR_KERNEL & MSR_LE)) {
 		flags ^= SW;
+#ifdef __BIG_ENDIAN__
 		/*
 		 * So-called "PowerPC little endian" mode works by
 		 * swizzling addresses rather than by actually doing
@@ -786,11 +799,13 @@ int fix_alignment(struct pt_regs *regs)
 		 */
 		if (cpu_has_feature(CPU_FTR_PPC_LE))
 			swiz = 7;
+#endif
 	}
 
 	/* DAR has the operand effective address */
 	addr = (unsigned char __user *)regs->dar;
 
+#ifdef __BIG_ENDIAN__
 #ifdef CONFIG_VSX
 	if ((instruction & 0xfc00003e) == 0x7c000018) {
 		unsigned int elsize;
@@ -810,7 +825,7 @@ int fix_alignment(struct pt_regs *regs)
 			elsize = 8;
 
 		flags = 0;
-		if (regs->msr & MSR_LE)
+		if ((regs->msr & MSR_LE) != (MSR_KERNEL & MSR_LE))
 			flags |= SW;
 		if (instruction & 0x100)
 			flags |= ST;
@@ -824,6 +839,9 @@ int fix_alignment(struct pt_regs *regs)
 		PPC_WARN_ALIGNMENT(vsx, regs);
 		return emulate_vsx(addr, reg, areg, regs, flags, nb, elsize);
 	}
+#endif
+#else
+	return -EFAULT;
 #endif
 	/* A size of 0 indicates an instruction we don't support, with
 	 * the exception of DCBZ which is handled as a special case here
@@ -839,9 +857,13 @@ int fix_alignment(struct pt_regs *regs)
 	 * function
 	 */
 	if (flags & M) {
+#ifdef __BIG_ENDIAN__
 		PPC_WARN_ALIGNMENT(multiple, regs);
 		return emulate_multiple(regs, addr, reg, nb,
 					flags, instr, swiz);
+#else
+		return -EFAULT;
+#endif
 	}
 
 	/* Verify the address of the operand */
@@ -860,8 +882,12 @@ int fix_alignment(struct pt_regs *regs)
 
 	/* Special case for 16-byte FP loads and stores */
 	if (nb == 16) {
+#ifdef __BIG_ENDIAN__
 		PPC_WARN_ALIGNMENT(fp_pair, regs);
 		return emulate_fp_pair(addr, reg, flags);
+#else
+		return -EFAULT;
+#endif
 	}
 
 	PPC_WARN_ALIGNMENT(unaligned, regs);
@@ -870,24 +896,28 @@ int fix_alignment(struct pt_regs *regs)
 	 * get it from register values
 	 */
 	if (!(flags & ST)) {
-		data.ll = 0;
-		ret = 0;
-		p = (unsigned long) addr;
+		unsigned int start = 0;
+
 		switch (nb) {
-		case 8:
-			ret |= __get_user_inatomic(data.v[0], SWIZ_PTR(p++));
-			ret |= __get_user_inatomic(data.v[1], SWIZ_PTR(p++));
-			ret |= __get_user_inatomic(data.v[2], SWIZ_PTR(p++));
-			ret |= __get_user_inatomic(data.v[3], SWIZ_PTR(p++));
 		case 4:
-			ret |= __get_user_inatomic(data.v[4], SWIZ_PTR(p++));
-			ret |= __get_user_inatomic(data.v[5], SWIZ_PTR(p++));
+			start = offsetof(union data, x32.low32);
+			break;
 		case 2:
-			ret |= __get_user_inatomic(data.v[6], SWIZ_PTR(p++));
-			ret |= __get_user_inatomic(data.v[7], SWIZ_PTR(p++));
-			if (unlikely(ret))
-				return -EFAULT;
+			start = offsetof(union data, x16.low16);
+			break;
 		}
+
+		data.ll = 0;
+		ret = 0;
+		p = (unsigned long)addr;
+
+		for (i = 0; i < nb; i++)
+			ret |= __get_user_inatomic(data.v[start + i],
+						   SWIZ_PTR(p++));
+
+		if (unlikely(ret))
+			return -EFAULT;
+
 	} else if (flags & F) {
 		data.dd = current->thread.TS_FPR(reg);
 		if (flags & S) {
@@ -945,21 +975,24 @@ int fix_alignment(struct pt_regs *regs)
 
 	/* Store result to memory or update registers */
 	if (flags & ST) {
-		ret = 0;
-		p = (unsigned long) addr;
+		unsigned int start = 0;
+
 		switch (nb) {
-		case 8:
-			ret |= __put_user_inatomic(data.v[0], SWIZ_PTR(p++));
-			ret |= __put_user_inatomic(data.v[1], SWIZ_PTR(p++));
-			ret |= __put_user_inatomic(data.v[2], SWIZ_PTR(p++));
-			ret |= __put_user_inatomic(data.v[3], SWIZ_PTR(p++));
 		case 4:
-			ret |= __put_user_inatomic(data.v[4], SWIZ_PTR(p++));
-			ret |= __put_user_inatomic(data.v[5], SWIZ_PTR(p++));
+			start = offsetof(union data, x32.low32);
+			break;
 		case 2:
-			ret |= __put_user_inatomic(data.v[6], SWIZ_PTR(p++));
-			ret |= __put_user_inatomic(data.v[7], SWIZ_PTR(p++));
+			start = offsetof(union data, x16.low16);
+			break;
 		}
+
+		ret = 0;
+		p = (unsigned long)addr;
+
+		for (i = 0; i < nb; i++)
+			ret |= __put_user_inatomic(data.v[start + i],
+						   SWIZ_PTR(p++));
+
 		if (unlikely(ret))
 			return -EFAULT;
 	} else if (flags & F)
-- 
cgit v1.2.3


From 52055d07ce0a465949552c9c5d65d2b8b37672c5 Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:04:50 +1000
Subject: powerpc: Handle VSX alignment faults in little endian mode

Things are complicated by the fact that VSX elements are big
endian ordered even in little endian mode. 8 byte loads and
stores also write to the top 8 bytes of the register.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/align.c | 41 +++++++++++++++++++++++++++++++++--------
 1 file changed, 33 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index cce82b1e0374..59f70adcbcd9 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -630,7 +630,7 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg,
 }
 #endif /* CONFIG_SPE */
 
-#if defined(CONFIG_VSX) && defined(__BIG_ENDIAN__)
+#ifdef CONFIG_VSX
 /*
  * Emulate VSX instructions...
  */
@@ -658,8 +658,25 @@ static int emulate_vsx(unsigned char __user *addr, unsigned int reg,
 
 	lptr = (unsigned long *) ptr;
 
+#ifdef __LITTLE_ENDIAN__
+	if (flags & SW) {
+		elsize = length;
+		sw = length-1;
+	} else {
+		/*
+		 * The elements are BE ordered, even in LE mode, so process
+		 * them in reverse order.
+		 */
+		addr += length - elsize;
+
+		/* 8 byte memory accesses go in the top 8 bytes of the VR */
+		if (length == 8)
+			ptr += 8;
+	}
+#else
 	if (flags & SW)
 		sw = elsize-1;
+#endif
 
 	for (j = 0; j < length; j += elsize) {
 		for (i = 0; i < elsize; ++i) {
@@ -669,19 +686,31 @@ static int emulate_vsx(unsigned char __user *addr, unsigned int reg,
 				ret |= __get_user(ptr[i^sw], addr + i);
 		}
 		ptr  += elsize;
+#ifdef __LITTLE_ENDIAN__
+		addr -= elsize;
+#else
 		addr += elsize;
+#endif
 	}
 
+#ifdef __BIG_ENDIAN__
+#define VSX_HI 0
+#define VSX_LO 1
+#else
+#define VSX_HI 1
+#define VSX_LO 0
+#endif
+
 	if (!ret) {
 		if (flags & U)
 			regs->gpr[areg] = regs->dar;
 
 		/* Splat load copies the same data to top and bottom 8 bytes */
 		if (flags & SPLT)
-			lptr[1] = lptr[0];
-		/* For 8 byte loads, zero the top 8 bytes */
+			lptr[VSX_LO] = lptr[VSX_HI];
+		/* For 8 byte loads, zero the low 8 bytes */
 		else if (!(flags & ST) && (8 == length))
-			lptr[1] = 0;
+			lptr[VSX_LO] = 0;
 	} else
 		return -EFAULT;
 
@@ -805,7 +834,6 @@ int fix_alignment(struct pt_regs *regs)
 	/* DAR has the operand effective address */
 	addr = (unsigned char __user *)regs->dar;
 
-#ifdef __BIG_ENDIAN__
 #ifdef CONFIG_VSX
 	if ((instruction & 0xfc00003e) == 0x7c000018) {
 		unsigned int elsize;
@@ -839,9 +867,6 @@ int fix_alignment(struct pt_regs *regs)
 		PPC_WARN_ALIGNMENT(vsx, regs);
 		return emulate_vsx(addr, reg, areg, regs, flags, nb, elsize);
 	}
-#endif
-#else
-	return -EFAULT;
 #endif
 	/* A size of 0 indicates an instruction we don't support, with
 	 * the exception of DCBZ which is handled as a special case here
-- 
cgit v1.2.3


From 7a332b0c9a59e0b0777dec55eefdda0f9a24ac52 Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:04:51 +1000
Subject: powerpc: Use generic checksum code in little endian

We need to fix some endian issues in our checksum code. For now
just enable the generic checksum routines for little endian builds.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Kconfig                | 3 +++
 arch/powerpc/include/asm/checksum.h | 5 +++++
 arch/powerpc/kernel/ppc_ksyms.c     | 2 ++
 arch/powerpc/lib/Makefile           | 9 +++++++--
 4 files changed, 17 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 38f3b7e47ec5..2c69c43ba68e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -139,6 +139,9 @@ config PPC
 	select OLD_SIGACTION if PPC32
 	select HAVE_DEBUG_STACKOVERFLOW
 
+config GENERIC_CSUM
+	def_bool CPU_LITTLE_ENDIAN
+
 config EARLY_PRINTK
 	bool
 	default y
diff --git a/arch/powerpc/include/asm/checksum.h b/arch/powerpc/include/asm/checksum.h
index ce0c28495f9a..8251a3ba870f 100644
--- a/arch/powerpc/include/asm/checksum.h
+++ b/arch/powerpc/include/asm/checksum.h
@@ -14,6 +14,9 @@
  * which always checksum on 4 octet boundaries.  ihl is the number
  * of 32-bit words and is always >= 5.
  */
+#ifdef CONFIG_GENERIC_CSUM
+#include <asm-generic/checksum.h>
+#else
 extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
 
 /*
@@ -123,5 +126,7 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
 	return sum;
 #endif
 }
+
+#endif
 #endif /* __KERNEL__ */
 #endif
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 21646dbe1bb3..3b485c5cff10 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -79,10 +79,12 @@ EXPORT_SYMBOL(strlen);
 EXPORT_SYMBOL(strcmp);
 EXPORT_SYMBOL(strncmp);
 
+#ifndef CONFIG_GENERIC_CSUM
 EXPORT_SYMBOL(csum_partial);
 EXPORT_SYMBOL(csum_partial_copy_generic);
 EXPORT_SYMBOL(ip_fast_csum);
 EXPORT_SYMBOL(csum_tcpudp_magic);
+#endif
 
 EXPORT_SYMBOL(__copy_tofrom_user);
 EXPORT_SYMBOL(__clear_user);
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 450433276699..33ab26112123 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -10,15 +10,20 @@ CFLAGS_REMOVE_code-patching.o = -pg
 CFLAGS_REMOVE_feature-fixups.o = -pg
 
 obj-y			:= string.o alloc.o \
-			   checksum_$(CONFIG_WORD_SIZE).o crtsavres.o
+			   crtsavres.o
 obj-$(CONFIG_PPC32)	+= div64.o copy_32.o
 obj-$(CONFIG_HAS_IOMEM)	+= devres.o
 
 obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
 			   memcpy_64.o usercopy_64.o mem_64.o string.o \
-			   checksum_wrappers_64.o hweight_64.o \
+			   hweight_64.o \
 			   copyuser_power7.o string_64.o copypage_power7.o \
 			   memcpy_power7.o
+ifeq ($(CONFIG_GENERIC_CSUM),)
+obj-y			+= checksum_$(CONFIG_WORD_SIZE).o
+obj-$(CONFIG_PPC64)	+= checksum_wrappers_64.o
+endif
+
 obj-$(CONFIG_PPC_EMULATE_SSTEP)	+= sstep.o ldstfp.o
 
 ifeq ($(CONFIG_PPC64),y)
-- 
cgit v1.2.3


From de577a356848a629b2c7f252ca3d1bc87375b52b Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:04:52 +1000
Subject: powerpc: Use generic memcpy code in little endian

We need to fix some endian issues in our memcpy code. For now
just enable the generic memcpy routine for little endian builds.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/string.h | 4 ++++
 arch/powerpc/kernel/ppc_ksyms.c   | 2 ++
 arch/powerpc/lib/Makefile         | 9 ++++++---
 3 files changed, 12 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/string.h b/arch/powerpc/include/asm/string.h
index e40010abcaf1..0dffad6bcc84 100644
--- a/arch/powerpc/include/asm/string.h
+++ b/arch/powerpc/include/asm/string.h
@@ -10,7 +10,9 @@
 #define __HAVE_ARCH_STRNCMP
 #define __HAVE_ARCH_STRCAT
 #define __HAVE_ARCH_MEMSET
+#ifdef __BIG_ENDIAN__
 #define __HAVE_ARCH_MEMCPY
+#endif
 #define __HAVE_ARCH_MEMMOVE
 #define __HAVE_ARCH_MEMCMP
 #define __HAVE_ARCH_MEMCHR
@@ -22,7 +24,9 @@ extern int strcmp(const char *,const char *);
 extern int strncmp(const char *, const char *, __kernel_size_t);
 extern char * strcat(char *, const char *);
 extern void * memset(void *,int,__kernel_size_t);
+#ifdef __BIG_ENDIAN__
 extern void * memcpy(void *,const void *,__kernel_size_t);
+#endif
 extern void * memmove(void *,const void *,__kernel_size_t);
 extern int memcmp(const void *,const void *,__kernel_size_t);
 extern void * memchr(const void *,int,__kernel_size_t);
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 3b485c5cff10..60bbeb29f9b8 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -148,7 +148,9 @@ EXPORT_SYMBOL(__ucmpdi2);
 #endif
 long long __bswapdi2(long long);
 EXPORT_SYMBOL(__bswapdi2);
+#ifdef __BIG_ENDIAN__
 EXPORT_SYMBOL(memcpy);
+#endif
 EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(memmove);
 EXPORT_SYMBOL(memcmp);
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 33ab26112123..5310132856c1 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -15,15 +15,18 @@ obj-$(CONFIG_PPC32)	+= div64.o copy_32.o
 obj-$(CONFIG_HAS_IOMEM)	+= devres.o
 
 obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
-			   memcpy_64.o usercopy_64.o mem_64.o string.o \
+			   usercopy_64.o mem_64.o string.o \
 			   hweight_64.o \
-			   copyuser_power7.o string_64.o copypage_power7.o \
-			   memcpy_power7.o
+			   copyuser_power7.o string_64.o copypage_power7.o
 ifeq ($(CONFIG_GENERIC_CSUM),)
 obj-y			+= checksum_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_PPC64)	+= checksum_wrappers_64.o
 endif
 
+ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),)
+obj-$(CONFIG_PPC64)		+= memcpy_power7.o memcpy_64.o 
+endif
+
 obj-$(CONFIG_PPC_EMULATE_SSTEP)	+= sstep.o ldstfp.o
 
 ifeq ($(CONFIG_PPC64),y)
-- 
cgit v1.2.3


From a0588015deab1844261b27a67ae6f5b910fe2830 Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:04:53 +1000
Subject: powerpc: uname should return ppc64le/ppcle on little endian builds

We need to distinguish between big endian and little endian
environments, so fix uname to return the right thing.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Makefile | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 51cfb78d4061..debfa2b1c1de 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -36,17 +36,26 @@ KBUILD_DEFCONFIG := ppc64_defconfig
 endif
 
 ifeq ($(CONFIG_PPC64),y)
-OLDARCH	:= ppc64
-
 new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
 
 ifeq ($(new_nm),y)
 NM		:= $(NM) --synthetic
 endif
+endif
 
+ifeq ($(CONFIG_PPC64),y)
+ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
+OLDARCH	:= ppc64le
+else
+OLDARCH	:= ppc64
+endif
+else
+ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
+OLDARCH	:= ppcle
 else
 OLDARCH	:= ppc
 endif
+endif
 
 # It seems there are times we use this Makefile without
 # including the config file, but this replicates the old behaviour
-- 
cgit v1.2.3


From 1cc79bc80606229b0e7e56c76ee3cb3594409aa9 Mon Sep 17 00:00:00 2001
From: Alistair Popple
Date: Mon, 23 Sep 2013 12:04:54 +1000
Subject: powerpc: Little endian fixes for platforms/powernv/opal.c

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powernv/opal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 2911abe550f1..4ffa75ef284b 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -372,7 +372,7 @@ static irqreturn_t opal_interrupt(int irq, void *data)
 static int __init opal_init(void)
 {
 	struct device_node *np, *consoles;
-	const u32 *irqs;
+	const __be32 *irqs;
 	int rc, i, irqlen;
 
 	opal_node = of_find_node_by_path("/ibm,opal");
-- 
cgit v1.2.3


From 044cb69c53f286673b6809641f9c0ce929f9f221 Mon Sep 17 00:00:00 2001
From: Alistair Popple
Date: Mon, 23 Sep 2013 12:04:55 +1000
Subject: powerpc: Little endian fix for arch/powerpc/platforms/powernv/pci.c

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powernv/pci.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index a28d3b5e6393..912221565c5c 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -462,8 +462,8 @@ void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
 static struct iommu_table *pnv_pci_setup_bml_iommu(struct pci_controller *hose)
 {
 	struct iommu_table *tbl;
-	const __be64 *basep, *swinvp;
-	const __be32 *sizep;
+	const __be64 *basep;
+	const __be32 *sizep, *swinvp;
 
 	basep = of_get_property(hose->dn, "linux,tce-base", NULL);
 	sizep = of_get_property(hose->dn, "linux,tce-size", NULL);
@@ -484,8 +484,9 @@ static struct iommu_table *pnv_pci_setup_bml_iommu(struct pci_controller *hose)
 	swinvp = of_get_property(hose->dn, "linux,tce-sw-invalidate-info",
 				 NULL);
 	if (swinvp) {
-		tbl->it_busno = swinvp[1];
-		tbl->it_index = (unsigned long)ioremap(swinvp[0], 8);
+		tbl->it_busno = of_read_ulong(&swinvp[1], 2);
+		tbl->it_index =
+			(unsigned long)ioremap(of_read_number(swinvp, 2), 8);
 		tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
 	}
 	return tbl;
-- 
cgit v1.2.3


From 8c5fcc83afd0738a089641bc0862b9058e9cfd06 Mon Sep 17 00:00:00 2001
From: Alistair Popple
Date: Mon, 23 Sep 2013 12:04:56 +1000
Subject: powerpc: Little endian fix for
 arch/powerpc/platforms/powernv/pci-p5ioc2.c

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powernv/pci-p5ioc2.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
index b68db6325c1b..f8b4bd8afb2e 100644
--- a/arch/powerpc/platforms/powernv/pci-p5ioc2.c
+++ b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
@@ -99,7 +99,7 @@ static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np, u64 hub_id,
 					   void *tce_mem, u64 tce_size)
 {
 	struct pnv_phb *phb;
-	const u64 *prop64;
+	const __be64 *prop64;
 	u64 phb_id;
 	int64_t rc;
 	static int primary = 1;
@@ -178,7 +178,7 @@ static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np, u64 hub_id,
 void __init pnv_pci_init_p5ioc2_hub(struct device_node *np)
 {
 	struct device_node *phbn;
-	const u64 *prop64;
+	const __be64 *prop64;
 	u64 hub_id;
 	void *tce_mem;
 	uint64_t tce_per_phb;
-- 
cgit v1.2.3


From c681b93c1fd016e94c8f3dd948dcc28a78790df7 Mon Sep 17 00:00:00 2001
From: Alistair Popple
Date: Mon, 23 Sep 2013 12:04:57 +1000
Subject: powerpc: Little endian sparse clean up for
 arch/powerpc/platforms/powernv/pci-ioda.c

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 74a5a5773b1f..9a903ed1e115 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1106,7 +1106,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	struct pci_controller *hose;
 	struct pnv_phb *phb;
 	unsigned long size, m32map_off, iomap_off, pemap_off;
-	const u64 *prop64;
+	const __be64 *prop64;
 	const u32 *prop32;
 	int len;
 	u64 phb_id;
@@ -1285,7 +1285,7 @@ void __init pnv_pci_init_ioda2_phb(struct device_node *np)
 void __init pnv_pci_init_ioda_hub(struct device_node *np)
 {
 	struct device_node *phbn;
-	const u64 *prop64;
+	const __be64 *prop64;
 	u64 hub_id;
 
 	pr_info("Probing IODA IO-Hub %s\n", np->full_name);
-- 
cgit v1.2.3


From 46d319e5d8c8add09378a67e27237504d0132283 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Mon, 23 Sep 2013 12:04:58 +1000
Subject: powerpc/powernv: Fix endian issues in OPAL RTC driver

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powernv/opal-rtc.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/opal-rtc.c b/arch/powerpc/platforms/powernv/opal-rtc.c
index 2aa7641aac9b..dbfdba35fcf3 100644
--- a/arch/powerpc/platforms/powernv/opal-rtc.c
+++ b/arch/powerpc/platforms/powernv/opal-rtc.c
@@ -48,6 +48,8 @@ unsigned long __init opal_get_boot_time(void)
 	}
 	if (rc != OPAL_SUCCESS)
 		return 0;
+	y_m_d = be32_to_cpu(y_m_d);
+	h_m_s_ms = be64_to_cpu(h_m_s_ms);
 	opal_to_tm(y_m_d, h_m_s_ms, &tm);
 	return mktime(tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
 		      tm.tm_hour, tm.tm_min, tm.tm_sec);
@@ -68,6 +70,8 @@ void opal_get_rtc_time(struct rtc_time *tm)
 	}
 	if (rc != OPAL_SUCCESS)
 		return;
+	y_m_d = be32_to_cpu(y_m_d);
+	h_m_s_ms = be64_to_cpu(h_m_s_ms);
 	opal_to_tm(y_m_d, h_m_s_ms, tm);
 }
 
@@ -86,6 +90,9 @@ int opal_set_rtc_time(struct rtc_time *tm)
 	h_m_s_ms |= ((u64)bin2bcd(tm->tm_min)) << 48;
 	h_m_s_ms |= ((u64)bin2bcd(tm->tm_sec)) << 40;
 
+	y_m_d = cpu_to_be32(y_m_d);
+	h_m_s_ms = cpu_to_be64(h_m_s_ms);
+
 	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
 		rc = opal_rtc_write(y_m_d, h_m_s_ms);
 		if (rc == OPAL_BUSY_EVENT)
-- 
cgit v1.2.3


From bf8e0f891a32ba24fa8811e496fabb449589d942 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Mon, 23 Sep 2013 12:04:59 +1000
Subject: powerpc/powernv: Fix endian issues in OPAL ICS backend

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/xics/ics-opal.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/xics/ics-opal.c b/arch/powerpc/sysdev/xics/ics-opal.c
index 39d72212655e..3c6ee1b64e5d 100644
--- a/arch/powerpc/sysdev/xics/ics-opal.c
+++ b/arch/powerpc/sysdev/xics/ics-opal.c
@@ -112,6 +112,7 @@ static int ics_opal_set_affinity(struct irq_data *d,
 				 bool force)
 {
 	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+	__be16 oserver;
 	int16_t server;
 	int8_t priority;
 	int64_t rc;
@@ -120,13 +121,13 @@ static int ics_opal_set_affinity(struct irq_data *d,
 	if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
 		return -1;
 
-	rc = opal_get_xive(hw_irq, &server, &priority);
+	rc = opal_get_xive(hw_irq, &oserver, &priority);
 	if (rc != OPAL_SUCCESS) {
-		pr_err("%s: opal_set_xive(irq=%d [hw 0x%x] server=%x)"
-		       " error %lld\n",
-		       __func__, d->irq, hw_irq, server, rc);
+		pr_err("%s: opal_get_xive(irq=%d [hw 0x%x]) error %lld\n",
+		       __func__, d->irq, hw_irq, rc);
 		return -1;
 	}
+	server = be16_to_cpu(oserver);
 
 	wanted_server = xics_get_irq_server(d->irq, cpumask, 1);
 	if (wanted_server < 0) {
@@ -181,7 +182,7 @@ static int ics_opal_map(struct ics *ics, unsigned int virq)
 {
 	unsigned int hw_irq = (unsigned int)virq_to_hw(virq);
 	int64_t rc;
-	int16_t server;
+	__be16 server;
 	int8_t priority;
 
 	if (WARN_ON(hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS))
@@ -201,7 +202,7 @@ static int ics_opal_map(struct ics *ics, unsigned int virq)
 static void ics_opal_mask_unknown(struct ics *ics, unsigned long vec)
 {
 	int64_t rc;
-	int16_t server;
+	__be16 server;
 	int8_t priority;
 
 	/* Check if HAL knows about this interrupt */
@@ -215,14 +216,14 @@ static void ics_opal_mask_unknown(struct ics *ics, unsigned long vec)
 static long ics_opal_get_server(struct ics *ics, unsigned long vec)
 {
 	int64_t rc;
-	int16_t server;
+	__be16 server;
 	int8_t priority;
 
 	/* Check if HAL knows about this interrupt */
 	rc = opal_get_xive(vec, &server, &priority);
 	if (rc != OPAL_SUCCESS)
 		return -1;
-	return ics_opal_unmangle_server(server);
+	return ics_opal_unmangle_server(be16_to_cpu(server));
 }
 
 int __init ics_opal_init(void)
-- 
cgit v1.2.3


From 81063cdd61795f0db85725bae4945d0762269e04 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Mon, 23 Sep 2013 12:05:00 +1000
Subject: powerpc/powernv: Make OPAL NVRAM device tree accesses endian safe

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powernv/opal-nvram.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/opal-nvram.c b/arch/powerpc/platforms/powernv/opal-nvram.c
index 3f83e1ae26ac..acd9f7e96678 100644
--- a/arch/powerpc/platforms/powernv/opal-nvram.c
+++ b/arch/powerpc/platforms/powernv/opal-nvram.c
@@ -65,7 +65,7 @@ static ssize_t opal_nvram_write(char *buf, size_t count, loff_t *index)
 void __init opal_nvram_init(void)
 {
 	struct device_node *np;
-	const u32 *nbytes_p;
+	const __be32 *nbytes_p;
 
 	np = of_find_compatible_node(NULL, NULL, "ibm,opal-nvram");
 	if (np == NULL)
@@ -76,7 +76,7 @@ void __init opal_nvram_init(void)
 		of_node_put(np);
 		return;
 	}
-	nvram_size = *nbytes_p;
+	nvram_size = be32_to_cpup(nbytes_p);
 
 	printk(KERN_INFO "OPAL nvram setup, %u bytes\n", nvram_size);
 	of_node_put(np);
-- 
cgit v1.2.3


From 3a1a46612d4882462e8d06866df717e1707abbba Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Mon, 23 Sep 2013 12:05:01 +1000
Subject: powerpc/powernv: Fix endian issues in powernv PCI code

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 31 +++++++++++++++++--------------
 arch/powerpc/platforms/powernv/pci.c      | 27 +++++++++++++--------------
 2 files changed, 30 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 9a903ed1e115..f9cb6c53a0ca 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -457,7 +457,7 @@ static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus)
 static void pnv_pci_ioda1_tce_invalidate(struct iommu_table *tbl,
 					 u64 *startp, u64 *endp)
 {
-	u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
+	__be64 __iomem *invalidate = (__be64 __iomem *)tbl->it_index;
 	unsigned long start, end, inc;
 
 	start = __pa(startp);
@@ -484,7 +484,7 @@ static void pnv_pci_ioda1_tce_invalidate(struct iommu_table *tbl,
 
         mb(); /* Ensure above stores are visible */
         while (start <= end) {
-                __raw_writeq(start, invalidate);
+                __raw_writeq(cpu_to_be64(start), invalidate);
                 start += inc;
         }
 
@@ -499,7 +499,7 @@ static void pnv_pci_ioda2_tce_invalidate(struct pnv_ioda_pe *pe,
 					 u64 *startp, u64 *endp)
 {
 	unsigned long start, end, inc;
-	u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
+	__be64 __iomem *invalidate = (__be64 __iomem *)tbl->it_index;
 
 	/* We'll invalidate DMA address in PE scope */
 	start = 0x2ul << 60;
@@ -515,7 +515,7 @@ static void pnv_pci_ioda2_tce_invalidate(struct pnv_ioda_pe *pe,
 	mb();
 
 	while (start <= end) {
-		__raw_writeq(start, invalidate);
+		__raw_writeq(cpu_to_be64(start), invalidate);
 		start += inc;
 	}
 }
@@ -786,8 +786,7 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
 	struct irq_data *idata;
 	struct irq_chip *ichip;
 	unsigned int xive_num = hwirq - phb->msi_base;
-	uint64_t addr64;
-	uint32_t addr32, data;
+	__be32 data;
 	int rc;
 
 	/* No PE assigned ? bail out ... no MSI for you ! */
@@ -811,6 +810,8 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
 	}
 
 	if (is_64) {
+		__be64 addr64;
+
 		rc = opal_get_msi_64(phb->opal_id, pe->mve_number, xive_num, 1,
 				     &addr64, &data);
 		if (rc) {
@@ -818,9 +819,11 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
 				pci_name(dev), rc);
 			return -EIO;
 		}
-		msg->address_hi = addr64 >> 32;
-		msg->address_lo = addr64 & 0xfffffffful;
+		msg->address_hi = be64_to_cpu(addr64) >> 32;
+		msg->address_lo = be64_to_cpu(addr64) & 0xfffffffful;
 	} else {
+		__be32 addr32;
+
 		rc = opal_get_msi_32(phb->opal_id, pe->mve_number, xive_num, 1,
 				     &addr32, &data);
 		if (rc) {
@@ -829,9 +832,9 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
 			return -EIO;
 		}
 		msg->address_hi = 0;
-		msg->address_lo = addr32;
+		msg->address_lo = be32_to_cpu(addr32);
 	}
-	msg->data = data;
+	msg->data = be32_to_cpu(data);
 
 	/*
 	 * Change the IRQ chip for the MSI interrupts on PHB3.
@@ -1107,7 +1110,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	struct pnv_phb *phb;
 	unsigned long size, m32map_off, iomap_off, pemap_off;
 	const __be64 *prop64;
-	const u32 *prop32;
+	const __be32 *prop32;
 	int len;
 	u64 phb_id;
 	void *aux;
@@ -1142,8 +1145,8 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	spin_lock_init(&phb->lock);
 	prop32 = of_get_property(np, "bus-range", &len);
 	if (prop32 && len == 8) {
-		hose->first_busno = prop32[0];
-		hose->last_busno = prop32[1];
+		hose->first_busno = be32_to_cpu(prop32[0]);
+		hose->last_busno = be32_to_cpu(prop32[1]);
 	} else {
 		pr_warn("  Broken <bus-range> on %s\n", np->full_name);
 		hose->first_busno = 0;
@@ -1175,7 +1178,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	if (!prop32)
 		phb->ioda.total_pe = 1;
 	else
-		phb->ioda.total_pe = *prop32;
+		phb->ioda.total_pe = be32_to_cpup(prop32);
 
 	phb->ioda.m32_size = resource_size(&hose->mem_resources[0]);
 	/* FW Has already off top 64k of M32 space (MSI space) */
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 912221565c5c..2f73e0da2603 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -236,7 +236,7 @@ static void pnv_pci_config_check_eeh(struct pnv_phb *phb,
 {
 	s64	rc;
 	u8	fstate;
-	u16	pcierr;
+	__be16	pcierr;
 	u32	pe_no;
 
 	/*
@@ -283,16 +283,16 @@ int pnv_pci_cfg_read(struct device_node *dn,
 		break;
 	}
 	case 2: {
-		u16 v16;
+		__be16 v16;
 		rc = opal_pci_config_read_half_word(phb->opal_id, bdfn, where,
 						   &v16);
-		*val = (rc == OPAL_SUCCESS) ? v16 : 0xffff;
+		*val = (rc == OPAL_SUCCESS) ? be16_to_cpu(v16) : 0xffff;
 		break;
 	}
 	case 4: {
-		u32 v32;
+		__be32 v32;
 		rc = opal_pci_config_read_word(phb->opal_id, bdfn, where, &v32);
-		*val = (rc == OPAL_SUCCESS) ? v32 : 0xffffffff;
+		*val = (rc == OPAL_SUCCESS) ? be32_to_cpu(v32) : 0xffffffff;
 		break;
 	}
 	default:
@@ -404,7 +404,7 @@ static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
 			 struct dma_attrs *attrs)
 {
 	u64 proto_tce;
-	u64 *tcep, *tces;
+	__be64 *tcep, *tces;
 	u64 rpn;
 
 	proto_tce = TCE_PCI_READ; // Read allowed
@@ -416,7 +416,7 @@ static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
 	rpn = __pa(uaddr) >> TCE_SHIFT;
 
 	while (npages--)
-		*(tcep++) = proto_tce | (rpn++ << TCE_RPN_SHIFT);
+		*(tcep++) = cpu_to_be64(proto_tce | (rpn++ << TCE_RPN_SHIFT));
 
 	/* Some implementations won't cache invalid TCEs and thus may not
 	 * need that flush. We'll probably turn it_type into a bit mask
@@ -430,12 +430,12 @@ static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
 
 static void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
 {
-	u64 *tcep, *tces;
+	__be64 *tcep, *tces;
 
 	tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset;
 
 	while (npages--)
-		*(tcep++) = 0;
+		*(tcep++) = cpu_to_be64(0);
 
 	if (tbl->it_type & TCE_PCI_SWINV_FREE)
 		pnv_pci_ioda_tce_invalidate(tbl, tces, tcep - 1);
@@ -462,8 +462,8 @@ void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
 static struct iommu_table *pnv_pci_setup_bml_iommu(struct pci_controller *hose)
 {
 	struct iommu_table *tbl;
-	const __be64 *basep;
-	const __be32 *sizep, *swinvp;
+	const __be64 *basep, *swinvp;
+	const __be32 *sizep;
 
 	basep = of_get_property(hose->dn, "linux,tce-base", NULL);
 	sizep = of_get_property(hose->dn, "linux,tce-size", NULL);
@@ -484,9 +484,8 @@ static struct iommu_table *pnv_pci_setup_bml_iommu(struct pci_controller *hose)
 	swinvp = of_get_property(hose->dn, "linux,tce-sw-invalidate-info",
 				 NULL);
 	if (swinvp) {
-		tbl->it_busno = of_read_ulong(&swinvp[1], 2);
-		tbl->it_index =
-			(unsigned long)ioremap(of_read_number(swinvp, 2), 8);
+		tbl->it_busno = swinvp[1];
+		tbl->it_index = (unsigned long)ioremap(be64_to_cpup(swinvp), 8);
 		tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
 	}
 	return tbl;
-- 
cgit v1.2.3


From 4f89363b1187ca0cc36ee6aebe0bee550f74288d Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Mon, 23 Sep 2013 12:05:02 +1000
Subject: powerpc/powernv: Fix endian issues in OPAL console and udbg backend

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/opal.h       |  8 ++++----
 arch/powerpc/platforms/powernv/opal.c | 28 ++++++++++++++++------------
 2 files changed, 20 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index c5cd72833d6e..6622ea438f0e 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -537,12 +537,12 @@ typedef struct oppanel_line {
 } oppanel_line_t;
 
 /* API functions */
-int64_t opal_console_write(int64_t term_number, int64_t *length,
+int64_t opal_console_write(int64_t term_number, __be64 *length,
 			   const uint8_t *buffer);
-int64_t opal_console_read(int64_t term_number, int64_t *length,
+int64_t opal_console_read(int64_t term_number, __be64 *length,
 			  uint8_t *buffer);
 int64_t opal_console_write_buffer_space(int64_t term_number,
-					int64_t *length);
+					__be64 *length);
 int64_t opal_rtc_read(uint32_t *year_month_day,
 		      uint64_t *hour_minute_second_millisecond);
 int64_t opal_rtc_write(uint32_t year_month_day,
@@ -552,7 +552,7 @@ int64_t opal_cec_reboot(void);
 int64_t opal_read_nvram(uint64_t buffer, uint64_t size, uint64_t offset);
 int64_t opal_write_nvram(uint64_t buffer, uint64_t size, uint64_t offset);
 int64_t opal_handle_interrupt(uint64_t isn, uint64_t *outstanding_event_mask);
-int64_t opal_poll_events(uint64_t *outstanding_event_mask);
+int64_t opal_poll_events(__be64 *outstanding_event_mask);
 int64_t opal_pci_set_hub_tce_memory(uint64_t hub_id, uint64_t tce_mem_addr,
 				    uint64_t tce_mem_size);
 int64_t opal_pci_set_phb_tce_memory(uint64_t phb_id, uint64_t tce_mem_addr,
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 4ffa75ef284b..eb7bf3bf604b 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -164,27 +164,28 @@ void opal_notifier_disable(void)
 
 int opal_get_chars(uint32_t vtermno, char *buf, int count)
 {
-	s64 len, rc;
-	u64 evt;
+	s64 rc;
+	__be64 evt, len;
 
 	if (!opal.entry)
 		return -ENODEV;
 	opal_poll_events(&evt);
-	if ((evt & OPAL_EVENT_CONSOLE_INPUT) == 0)
+	if ((be64_to_cpu(evt) & OPAL_EVENT_CONSOLE_INPUT) == 0)
 		return 0;
-	len = count;
-	rc = opal_console_read(vtermno, &len, buf);
+	len = cpu_to_be64(count);
+	rc = opal_console_read(vtermno, &len, buf);	
 	if (rc == OPAL_SUCCESS)
-		return len;
+		return be64_to_cpu(len);
 	return 0;
 }
 
 int opal_put_chars(uint32_t vtermno, const char *data, int total_len)
 {
 	int written = 0;
+	__be64 olen;
 	s64 len, rc;
 	unsigned long flags;
-	u64 evt;
+	__be64 evt;
 
 	if (!opal.entry)
 		return -ENODEV;
@@ -199,13 +200,14 @@ int opal_put_chars(uint32_t vtermno, const char *data, int total_len)
 	 */
 	spin_lock_irqsave(&opal_write_lock, flags);
 	if (firmware_has_feature(FW_FEATURE_OPALv2)) {
-		rc = opal_console_write_buffer_space(vtermno, &len);
+		rc = opal_console_write_buffer_space(vtermno, &olen);
+		len = be64_to_cpu(olen);
 		if (rc || len < total_len) {
 			spin_unlock_irqrestore(&opal_write_lock, flags);
 			/* Closed -> drop characters */
 			if (rc)
 				return total_len;
-			opal_poll_events(&evt);
+			opal_poll_events(NULL);
 			return -EAGAIN;
 		}
 	}
@@ -216,8 +218,9 @@ int opal_put_chars(uint32_t vtermno, const char *data, int total_len)
 	rc = OPAL_BUSY;
 	while(total_len > 0 && (rc == OPAL_BUSY ||
 				rc == OPAL_BUSY_EVENT || rc == OPAL_SUCCESS)) {
-		len = total_len;
-		rc = opal_console_write(vtermno, &len, data);
+		olen = cpu_to_be64(total_len);
+		rc = opal_console_write(vtermno, &olen, data);
+		len = be64_to_cpu(olen);
 
 		/* Closed or other error drop */
 		if (rc != OPAL_SUCCESS && rc != OPAL_BUSY &&
@@ -237,7 +240,8 @@ int opal_put_chars(uint32_t vtermno, const char *data, int total_len)
 		 */
 		do
 			opal_poll_events(&evt);
-		while(rc == OPAL_SUCCESS && (evt & OPAL_EVENT_CONSOLE_OUTPUT));
+		while(rc == OPAL_SUCCESS &&
+			(be64_to_cpu(evt) & OPAL_EVENT_CONSOLE_OUTPUT));
 	}
 	spin_unlock_irqrestore(&opal_write_lock, flags);
 	return written;
-- 
cgit v1.2.3


From be401b372fae219cf04c0c38890834c813d8dc90 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Mon, 23 Sep 2013 12:05:03 +1000
Subject: powerpc/powernv: Fix OPAL entry and exit in little endian mode

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powernv/opal-wrappers.S | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 8f3844535fbb..2a03e1e63c7a 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -34,7 +34,7 @@
 	mtmsrd	r12,1;			\
 	LOAD_REG_ADDR(r0,.opal_return);	\
 	mtlr	r0;			\
-	li	r0,MSR_DR|MSR_IR;	\
+	li	r0,MSR_DR|MSR_IR|MSR_LE;\
 	andc	r12,r12,r0;		\
 	li	r0,token;		\
 	mtspr	SPRN_HSRR1,r12;		\
@@ -45,6 +45,13 @@
 	hrfid
 
 _STATIC(opal_return)
+	/*
+	 * Fixup endian on OPAL return... we should be able to simplify
+	 * this by instead converting the below trampoline to a set of
+	 * bytes (always BE) since MSR:LE will end up fixed up as a side
+	 * effect of the rfid.
+	 */
+	FIXUP_ENDIAN
 	ld	r2,PACATOC(r13);
 	ld	r4,8(r1);
 	ld	r5,16(r1);
-- 
cgit v1.2.3


From 29186097f9267938af399897482c5a53686b3cce Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Mon, 23 Sep 2013 12:05:04 +1000
Subject: powerpc/powernv: Don't register exception handlers in little endian
 mode

The powernv exception handlers are not ready to take exceptions
in little endian mode, so disable them.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powernv/opal.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index eb7bf3bf604b..c2391bbdab12 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -77,6 +77,7 @@ int __init early_init_dt_scan_opal(unsigned long node,
 
 static int __init opal_register_exception_handlers(void)
 {
+#ifdef __BIG_ENDIAN__
 	u64 glue;
 
 	if (!(powerpc_firmware_features & FW_FEATURE_OPAL))
@@ -94,6 +95,7 @@ static int __init opal_register_exception_handlers(void)
 					0, glue);
 	glue += 128;
 	opal_register_exception_handler(OPAL_SOFTPATCH_HANDLER, 0, glue);
+#endif
 
 	return 0;
 }
-- 
cgit v1.2.3


From 6feff6d4a5e1ac8c48d88860bf705be7709b42af Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:05:05 +1000
Subject: powerpc/powernv: More little endian issues in OPAL RTC driver

Sparse caught an issue where opal_set_rtc_time was incorrectly
byteswapping. Also fix a number of sparse warnings.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/opal.h           |  4 ++--
 arch/powerpc/platforms/powernv/opal-rtc.c | 19 ++++++++++---------
 2 files changed, 12 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 6622ea438f0e..3db5e82ee942 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -543,8 +543,8 @@ int64_t opal_console_read(int64_t term_number, __be64 *length,
 			  uint8_t *buffer);
 int64_t opal_console_write_buffer_space(int64_t term_number,
 					__be64 *length);
-int64_t opal_rtc_read(uint32_t *year_month_day,
-		      uint64_t *hour_minute_second_millisecond);
+int64_t opal_rtc_read(__be32 *year_month_day,
+		      __be64 *hour_minute_second_millisecond);
 int64_t opal_rtc_write(uint32_t year_month_day,
 		       uint64_t hour_minute_second_millisecond);
 int64_t opal_cec_power_down(uint64_t request);
diff --git a/arch/powerpc/platforms/powernv/opal-rtc.c b/arch/powerpc/platforms/powernv/opal-rtc.c
index dbfdba35fcf3..7d07c7e80ec0 100644
--- a/arch/powerpc/platforms/powernv/opal-rtc.c
+++ b/arch/powerpc/platforms/powernv/opal-rtc.c
@@ -37,10 +37,12 @@ unsigned long __init opal_get_boot_time(void)
 	struct rtc_time tm;
 	u32 y_m_d;
 	u64 h_m_s_ms;
+	__be32 __y_m_d;
+	__be64 __h_m_s_ms;
 	long rc = OPAL_BUSY;
 
 	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
-		rc = opal_rtc_read(&y_m_d, &h_m_s_ms);
+		rc = opal_rtc_read(&__y_m_d, &__h_m_s_ms);
 		if (rc == OPAL_BUSY_EVENT)
 			opal_poll_events(NULL);
 		else
@@ -48,8 +50,8 @@ unsigned long __init opal_get_boot_time(void)
 	}
 	if (rc != OPAL_SUCCESS)
 		return 0;
-	y_m_d = be32_to_cpu(y_m_d);
-	h_m_s_ms = be64_to_cpu(h_m_s_ms);
+	y_m_d = be32_to_cpu(__y_m_d);
+	h_m_s_ms = be64_to_cpu(__h_m_s_ms);
 	opal_to_tm(y_m_d, h_m_s_ms, &tm);
 	return mktime(tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
 		      tm.tm_hour, tm.tm_min, tm.tm_sec);
@@ -60,9 +62,11 @@ void opal_get_rtc_time(struct rtc_time *tm)
 	long rc = OPAL_BUSY;
 	u32 y_m_d;
 	u64 h_m_s_ms;
+	__be32 __y_m_d;
+	__be64 __h_m_s_ms;
 
 	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
-		rc = opal_rtc_read(&y_m_d, &h_m_s_ms);
+		rc = opal_rtc_read(&__y_m_d, &__h_m_s_ms);
 		if (rc == OPAL_BUSY_EVENT)
 			opal_poll_events(NULL);
 		else
@@ -70,8 +74,8 @@ void opal_get_rtc_time(struct rtc_time *tm)
 	}
 	if (rc != OPAL_SUCCESS)
 		return;
-	y_m_d = be32_to_cpu(y_m_d);
-	h_m_s_ms = be64_to_cpu(h_m_s_ms);
+	y_m_d = be32_to_cpu(__y_m_d);
+	h_m_s_ms = be64_to_cpu(__h_m_s_ms);
 	opal_to_tm(y_m_d, h_m_s_ms, tm);
 }
 
@@ -90,9 +94,6 @@ int opal_set_rtc_time(struct rtc_time *tm)
 	h_m_s_ms |= ((u64)bin2bcd(tm->tm_min)) << 48;
 	h_m_s_ms |= ((u64)bin2bcd(tm->tm_sec)) << 40;
 
-	y_m_d = cpu_to_be32(y_m_d);
-	h_m_s_ms = cpu_to_be64(h_m_s_ms);
-
 	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
 		rc = opal_rtc_write(y_m_d, h_m_s_ms);
 		if (rc == OPAL_BUSY_EVENT)
-- 
cgit v1.2.3


From 5e4da530a5348e53bbb9f6f7f73c9afc67ed6c35 Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:05:06 +1000
Subject: powerpc/powernv: Fix some PCI sparse errors and one LE bug

pnv_pci_setup_bml_iommu was missing a byteswap of a device
tree property.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/opal.h           | 22 +++++++++++-----------
 arch/powerpc/platforms/powernv/opal.c     |  2 +-
 arch/powerpc/platforms/powernv/pci-ioda.c |  6 +++---
 arch/powerpc/platforms/powernv/pci.c      |  6 +++---
 arch/powerpc/platforms/powernv/pci.h      |  2 +-
 5 files changed, 19 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 3db5e82ee942..51e3b265ec12 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -551,7 +551,7 @@ int64_t opal_cec_power_down(uint64_t request);
 int64_t opal_cec_reboot(void);
 int64_t opal_read_nvram(uint64_t buffer, uint64_t size, uint64_t offset);
 int64_t opal_write_nvram(uint64_t buffer, uint64_t size, uint64_t offset);
-int64_t opal_handle_interrupt(uint64_t isn, uint64_t *outstanding_event_mask);
+int64_t opal_handle_interrupt(uint64_t isn, __be64 *outstanding_event_mask);
 int64_t opal_poll_events(__be64 *outstanding_event_mask);
 int64_t opal_pci_set_hub_tce_memory(uint64_t hub_id, uint64_t tce_mem_addr,
 				    uint64_t tce_mem_size);
@@ -560,9 +560,9 @@ int64_t opal_pci_set_phb_tce_memory(uint64_t phb_id, uint64_t tce_mem_addr,
 int64_t opal_pci_config_read_byte(uint64_t phb_id, uint64_t bus_dev_func,
 				  uint64_t offset, uint8_t *data);
 int64_t opal_pci_config_read_half_word(uint64_t phb_id, uint64_t bus_dev_func,
-				       uint64_t offset, uint16_t *data);
+				       uint64_t offset, __be16 *data);
 int64_t opal_pci_config_read_word(uint64_t phb_id, uint64_t bus_dev_func,
-				  uint64_t offset, uint32_t *data);
+				  uint64_t offset, __be32 *data);
 int64_t opal_pci_config_write_byte(uint64_t phb_id, uint64_t bus_dev_func,
 				   uint64_t offset, uint8_t data);
 int64_t opal_pci_config_write_half_word(uint64_t phb_id, uint64_t bus_dev_func,
@@ -570,14 +570,14 @@ int64_t opal_pci_config_write_half_word(uint64_t phb_id, uint64_t bus_dev_func,
 int64_t opal_pci_config_write_word(uint64_t phb_id, uint64_t bus_dev_func,
 				   uint64_t offset, uint32_t data);
 int64_t opal_set_xive(uint32_t isn, uint16_t server, uint8_t priority);
-int64_t opal_get_xive(uint32_t isn, uint16_t *server, uint8_t *priority);
+int64_t opal_get_xive(uint32_t isn, __be16 *server, uint8_t *priority);
 int64_t opal_register_exception_handler(uint64_t opal_exception,
 					uint64_t handler_address,
 					uint64_t glue_cache_line);
 int64_t opal_pci_eeh_freeze_status(uint64_t phb_id, uint64_t pe_number,
 				   uint8_t *freeze_state,
-				   uint16_t *pci_error_type,
-				   uint64_t *phb_status);
+				   __be16 *pci_error_type,
+				   __be64 *phb_status);
 int64_t opal_pci_eeh_freeze_clear(uint64_t phb_id, uint64_t pe_number,
 				  uint64_t eeh_action_token);
 int64_t opal_pci_shpc(uint64_t phb_id, uint64_t shpc_action, uint8_t *state);
@@ -614,13 +614,13 @@ int64_t opal_pci_msi_eoi(uint64_t phb_id, uint32_t hw_irq);
 int64_t opal_pci_set_xive_pe(uint64_t phb_id, uint32_t pe_number,
 			     uint32_t xive_num);
 int64_t opal_get_xive_source(uint64_t phb_id, uint32_t xive_num,
-			     int32_t *interrupt_source_number);
+			     __be32 *interrupt_source_number);
 int64_t opal_get_msi_32(uint64_t phb_id, uint32_t mve_number, uint32_t xive_num,
-			uint8_t msi_range, uint32_t *msi_address,
-			uint32_t *message_data);
+			uint8_t msi_range, __be32 *msi_address,
+			__be32 *message_data);
 int64_t opal_get_msi_64(uint64_t phb_id, uint32_t mve_number,
 			uint32_t xive_num, uint8_t msi_range,
-			uint64_t *msi_address, uint32_t *message_data);
+			__be64 *msi_address, __be32 *message_data);
 int64_t opal_start_cpu(uint64_t thread_number, uint64_t start_address);
 int64_t opal_query_cpu_status(uint64_t thread_number, uint8_t *thread_status);
 int64_t opal_write_oppanel(oppanel_line_t *lines, uint64_t num_lines);
@@ -642,7 +642,7 @@ int64_t opal_pci_fence_phb(uint64_t phb_id);
 int64_t opal_pci_reinit(uint64_t phb_id, uint8_t reinit_scope);
 int64_t opal_pci_mask_pe_error(uint64_t phb_id, uint16_t pe_number, uint8_t error_type, uint8_t mask_action);
 int64_t opal_set_slot_led_status(uint64_t phb_id, uint64_t slot_id, uint8_t led_type, uint8_t led_action);
-int64_t opal_get_epow_status(uint64_t *status);
+int64_t opal_get_epow_status(__be64 *status);
 int64_t opal_set_system_attention_led(uint8_t led_action);
 int64_t opal_pci_next_error(uint64_t phb_id, uint64_t *first_frozen_pe,
 			    uint16_t *pci_error_type, uint16_t *severity);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index c2391bbdab12..09336f0c54c5 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -366,7 +366,7 @@ int opal_machine_check(struct pt_regs *regs)
 
 static irqreturn_t opal_interrupt(int irq, void *data)
 {
-	uint64_t events;
+	__be64 events;
 
 	opal_handle_interrupt(virq_to_hw(irq), &events);
 
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index f9cb6c53a0ca..a6531d2ff6c2 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -455,7 +455,7 @@ static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus)
 }
 
 static void pnv_pci_ioda1_tce_invalidate(struct iommu_table *tbl,
-					 u64 *startp, u64 *endp)
+					 __be64 *startp, __be64 *endp)
 {
 	__be64 __iomem *invalidate = (__be64 __iomem *)tbl->it_index;
 	unsigned long start, end, inc;
@@ -496,7 +496,7 @@ static void pnv_pci_ioda1_tce_invalidate(struct iommu_table *tbl,
 
 static void pnv_pci_ioda2_tce_invalidate(struct pnv_ioda_pe *pe,
 					 struct iommu_table *tbl,
-					 u64 *startp, u64 *endp)
+					 __be64 *startp, __be64 *endp)
 {
 	unsigned long start, end, inc;
 	__be64 __iomem *invalidate = (__be64 __iomem *)tbl->it_index;
@@ -521,7 +521,7 @@ static void pnv_pci_ioda2_tce_invalidate(struct pnv_ioda_pe *pe,
 }
 
 void pnv_pci_ioda_tce_invalidate(struct iommu_table *tbl,
-				 u64 *startp, u64 *endp)
+				 __be64 *startp, __be64 *endp)
 {
 	struct pnv_ioda_pe *pe = container_of(tbl, struct pnv_ioda_pe,
 					      tce32_table);
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 2f73e0da2603..a26956c5f38c 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -412,7 +412,7 @@ static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
 	if (direction != DMA_TO_DEVICE)
 		proto_tce |= TCE_PCI_WRITE;
 
-	tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset;
+	tces = tcep = ((__be64 *)tbl->it_base) + index - tbl->it_offset;
 	rpn = __pa(uaddr) >> TCE_SHIFT;
 
 	while (npages--)
@@ -432,7 +432,7 @@ static void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
 {
 	__be64 *tcep, *tces;
 
-	tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset;
+	tces = tcep = ((__be64 *)tbl->it_base) + index - tbl->it_offset;
 
 	while (npages--)
 		*(tcep++) = cpu_to_be64(0);
@@ -484,7 +484,7 @@ static struct iommu_table *pnv_pci_setup_bml_iommu(struct pci_controller *hose)
 	swinvp = of_get_property(hose->dn, "linux,tce-sw-invalidate-info",
 				 NULL);
 	if (swinvp) {
-		tbl->it_busno = swinvp[1];
+		tbl->it_busno = be64_to_cpu(swinvp[1]);
 		tbl->it_index = (unsigned long)ioremap(be64_to_cpup(swinvp), 8);
 		tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
 	}
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index d633c64e05a1..dfe20104238e 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -193,6 +193,6 @@ extern void pnv_pci_init_p5ioc2_hub(struct device_node *np);
 extern void pnv_pci_init_ioda_hub(struct device_node *np);
 extern void pnv_pci_init_ioda2_phb(struct device_node *np);
 extern void pnv_pci_ioda_tce_invalidate(struct iommu_table *tbl,
-					u64 *startp, u64 *endp);
+					__be64 *startp, __be64 *endp);
 
 #endif /* __POWERNV_PCI_H */
-- 
cgit v1.2.3


From 99fc1d91b8fc30c969b0a2d152c803413ecb8cef Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Mon, 23 Sep 2013 12:05:07 +1000
Subject: powerpc/hvsi: Fix endian issues in HVSI driver

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/hvsi.h | 16 ++++++++--------
 drivers/tty/hvc/hvsi_lib.c      | 25 ++++++++++++-------------
 2 files changed, 20 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/hvsi.h b/arch/powerpc/include/asm/hvsi.h
index d3f64f361814..d4a5315718ca 100644
--- a/arch/powerpc/include/asm/hvsi.h
+++ b/arch/powerpc/include/asm/hvsi.h
@@ -25,7 +25,7 @@
 struct hvsi_header {
 	uint8_t  type;
 	uint8_t  len;
-	uint16_t seqno;
+	__be16 seqno;
 } __attribute__((packed));
 
 struct hvsi_data {
@@ -35,24 +35,24 @@ struct hvsi_data {
 
 struct hvsi_control {
 	struct hvsi_header hdr;
-	uint16_t verb;
+	__be16 verb;
 	/* optional depending on verb: */
-	uint32_t word;
-	uint32_t mask;
+	__be32 word;
+	__be32 mask;
 } __attribute__((packed));
 
 struct hvsi_query {
 	struct hvsi_header hdr;
-	uint16_t verb;
+	__be16 verb;
 } __attribute__((packed));
 
 struct hvsi_query_response {
 	struct hvsi_header hdr;
-	uint16_t verb;
-	uint16_t query_seqno;
+	__be16 verb;
+	__be16 query_seqno;
 	union {
 		uint8_t  version;
-		uint32_t mctrl_word;
+		__be32 mctrl_word;
 	} u;
 } __attribute__((packed));
 
diff --git a/drivers/tty/hvc/hvsi_lib.c b/drivers/tty/hvc/hvsi_lib.c
index ac2767100df5..347050ea414a 100644
--- a/drivers/tty/hvc/hvsi_lib.c
+++ b/drivers/tty/hvc/hvsi_lib.c
@@ -9,7 +9,7 @@
 
 static int hvsi_send_packet(struct hvsi_priv *pv, struct hvsi_header *packet)
 {
-	packet->seqno = atomic_inc_return(&pv->seqno);
+	packet->seqno = cpu_to_be16(atomic_inc_return(&pv->seqno));
 
 	/* Assumes that always succeeds, works in practice */
 	return pv->put_chars(pv->termno, (char *)packet, packet->len);
@@ -28,7 +28,7 @@ static void hvsi_start_handshake(struct hvsi_priv *pv)
 	/* Send version query */
 	q.hdr.type = VS_QUERY_PACKET_HEADER;
 	q.hdr.len = sizeof(struct hvsi_query);
-	q.verb = VSV_SEND_VERSION_NUMBER;
+	q.verb = cpu_to_be16(VSV_SEND_VERSION_NUMBER);
 	hvsi_send_packet(pv, &q.hdr);
 }
 
@@ -40,7 +40,7 @@ static int hvsi_send_close(struct hvsi_priv *pv)
 
 	ctrl.hdr.type = VS_CONTROL_PACKET_HEADER;
 	ctrl.hdr.len = sizeof(struct hvsi_control);
-	ctrl.verb = VSV_CLOSE_PROTOCOL;
+	ctrl.verb = cpu_to_be16(VSV_CLOSE_PROTOCOL);
 	return hvsi_send_packet(pv, &ctrl.hdr);
 }
 
@@ -69,14 +69,14 @@ static void hvsi_got_control(struct hvsi_priv *pv)
 {
 	struct hvsi_control *pkt = (struct hvsi_control *)pv->inbuf;
 
-	switch (pkt->verb) {
+	switch (be16_to_cpu(pkt->verb)) {
 	case VSV_CLOSE_PROTOCOL:
 		/* We restart the handshaking */
 		hvsi_start_handshake(pv);
 		break;
 	case VSV_MODEM_CTL_UPDATE:
 		/* Transition of carrier detect */
-		hvsi_cd_change(pv, pkt->word & HVSI_TSCD);
+		hvsi_cd_change(pv, be32_to_cpu(pkt->word) & HVSI_TSCD);
 		break;
 	}
 }
@@ -87,7 +87,7 @@ static void hvsi_got_query(struct hvsi_priv *pv)
 	struct hvsi_query_response r;
 
 	/* We only handle version queries */
-	if (pkt->verb != VSV_SEND_VERSION_NUMBER)
+	if (be16_to_cpu(pkt->verb) != VSV_SEND_VERSION_NUMBER)
 		return;
 
 	pr_devel("HVSI@%x: Got version query, sending response...\n",
@@ -96,7 +96,7 @@ static void hvsi_got_query(struct hvsi_priv *pv)
 	/* Send version response */
 	r.hdr.type = VS_QUERY_RESPONSE_PACKET_HEADER;
 	r.hdr.len = sizeof(struct hvsi_query_response);
-	r.verb = VSV_SEND_VERSION_NUMBER;
+	r.verb = cpu_to_be16(VSV_SEND_VERSION_NUMBER);
 	r.u.version = HVSI_VERSION;
 	r.query_seqno = pkt->hdr.seqno;
 	hvsi_send_packet(pv, &r.hdr);
@@ -112,7 +112,7 @@ static void hvsi_got_response(struct hvsi_priv *pv)
 
 	switch(r->verb) {
 	case VSV_SEND_MODEM_CTL_STATUS:
-		hvsi_cd_change(pv, r->u.mctrl_word & HVSI_TSCD);
+		hvsi_cd_change(pv, be32_to_cpu(r->u.mctrl_word) & HVSI_TSCD);
 		pv->mctrl_update = 1;
 		break;
 	}
@@ -265,8 +265,7 @@ int hvsilib_read_mctrl(struct hvsi_priv *pv)
 	pv->mctrl_update = 0;
 	q.hdr.type = VS_QUERY_PACKET_HEADER;
 	q.hdr.len = sizeof(struct hvsi_query);
-	q.hdr.seqno = atomic_inc_return(&pv->seqno);
-	q.verb = VSV_SEND_MODEM_CTL_STATUS;
+	q.verb = cpu_to_be16(VSV_SEND_MODEM_CTL_STATUS);
 	rc = hvsi_send_packet(pv, &q.hdr);
 	if (rc <= 0) {
 		pr_devel("HVSI@%x: Error %d...\n", pv->termno, rc);
@@ -304,9 +303,9 @@ int hvsilib_write_mctrl(struct hvsi_priv *pv, int dtr)
 
 	ctrl.hdr.type = VS_CONTROL_PACKET_HEADER,
 	ctrl.hdr.len = sizeof(struct hvsi_control);
-	ctrl.verb = VSV_SET_MODEM_CTL;
-	ctrl.mask = HVSI_TSDTR;
-	ctrl.word = dtr ? HVSI_TSDTR : 0;
+	ctrl.verb = cpu_to_be16(VSV_SET_MODEM_CTL);
+	ctrl.mask = cpu_to_be32(HVSI_TSDTR);
+	ctrl.word = cpu_to_be32(dtr ? HVSI_TSDTR : 0);
 	return hvsi_send_packet(pv, &ctrl.hdr);
 }
 
-- 
cgit v1.2.3


From 7df697c81587114ad4847598dd2d6061b73f1a12 Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:05:09 +1000
Subject: KVM: PPC: Disable KVM on little endian builds

There are a number of KVM issues with little endian builds.
We are working on fixing them, but in the meantime disable
it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kvm/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index ffaef2cb101a..e593ff257bd3 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -6,6 +6,7 @@ source "virt/kvm/Kconfig"
 
 menuconfig VIRTUALIZATION
 	bool "Virtualization"
+	depends on !CPU_LITTLE_ENDIAN
 	---help---
 	  Say Y here to get to see options for using your Linux host to run
 	  other operating systems inside virtual machines (guests).
-- 
cgit v1.2.3


From d72b08017161ab385d4ae080ea415c9eb7ceef83 Mon Sep 17 00:00:00 2001
From: Ian Munsie
Date: Mon, 23 Sep 2013 12:05:11 +1000
Subject: powerpc: Add ability to build little endian kernels

This patch allows the kbuild system to successfully compile a kernel
for the little endian PowerPC64 architecture. A subsequent patch
will add the CONFIG_CPU_LITTLE_ENDIAN kernel config option which
must be set to build such a kernel.

If cross compiling, CROSS_COMPILE must point to a suitable toolchain
(compiled for the powerpc64le-linux and powerpcle-linux targets).

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Makefile                   | 24 +++++++++++++++++++++---
 arch/powerpc/boot/Makefile              |  3 ++-
 arch/powerpc/kernel/vdso32/vdso32.lds.S |  4 ++++
 arch/powerpc/kernel/vdso64/vdso64.lds.S |  4 ++++
 4 files changed, 31 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index debfa2b1c1de..d3c91bf923b7 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -65,11 +65,29 @@ endif
 
 UTS_MACHINE := $(OLDARCH)
 
+ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
+override CC	+= -mlittle-endian
+override AS	+= -mlittle-endian
+override LD	+= -EL
+override CROSS32CC += -mlittle-endian
+override CROSS32AS += -mlittle-endian
+LDEMULATION	:= lppc
+GNUTARGET	:= powerpcle
+MULTIPLEWORD	:= -mno-multiple
+else
+override CC	+= -mbig-endian
+override AS	+= -mbig-endian
+override LD	+= -EB
+LDEMULATION	:= ppc
+GNUTARGET	:= powerpc
+MULTIPLEWORD	:= -mmultiple
+endif
+
 ifeq ($(HAS_BIARCH),y)
 override AS	+= -a$(CONFIG_WORD_SIZE)
-override LD	+= -m elf$(CONFIG_WORD_SIZE)ppc
+override LD	+= -m elf$(CONFIG_WORD_SIZE)$(LDEMULATION)
 override CC	+= -m$(CONFIG_WORD_SIZE)
-override AR	:= GNUTARGET=elf$(CONFIG_WORD_SIZE)-powerpc $(AR)
+override AR	:= GNUTARGET=elf$(CONFIG_WORD_SIZE)-$(GNUTARGET) $(AR)
 endif
 
 LDFLAGS_vmlinux-y := -Bstatic
@@ -95,7 +113,7 @@ endif
 CFLAGS-$(CONFIG_PPC64)	:= -mtraceback=no -mcall-aixdesc
 CFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mcmodel=medium,-mminimal-toc)
 CFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mno-pointers-to-nested-functions)
-CFLAGS-$(CONFIG_PPC32)	:= -ffixed-r2 -mmultiple
+CFLAGS-$(CONFIG_PPC32)	:= -ffixed-r2 $(MULTIPLEWORD)
 
 ifeq ($(CONFIG_PPC_BOOK3S_64),y)
 CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power7,-mtune=power4)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 15ca2255f438..ca7f08cc4afd 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -22,7 +22,8 @@ all: $(obj)/zImage
 BOOTCFLAGS    := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		 -fno-strict-aliasing -Os -msoft-float -pipe \
 		 -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
-		 -isystem $(shell $(CROSS32CC) -print-file-name=include)
+		 -isystem $(shell $(CROSS32CC) -print-file-name=include) \
+		 -mbig-endian
 BOOTAFLAGS	:= -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
 
 ifdef CONFIG_DEBUG_INFO
diff --git a/arch/powerpc/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S
index f223409629b9..e58ee10fa5c0 100644
--- a/arch/powerpc/kernel/vdso32/vdso32.lds.S
+++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S
@@ -4,7 +4,11 @@
  */
 #include <asm/vdso.h>
 
+#ifdef __LITTLE_ENDIAN__
+OUTPUT_FORMAT("elf32-powerpcle", "elf32-powerpcle", "elf32-powerpcle")
+#else
 OUTPUT_FORMAT("elf32-powerpc", "elf32-powerpc", "elf32-powerpc")
+#endif
 OUTPUT_ARCH(powerpc:common)
 ENTRY(_start)
 
diff --git a/arch/powerpc/kernel/vdso64/vdso64.lds.S b/arch/powerpc/kernel/vdso64/vdso64.lds.S
index e4863819663b..64fb183a47c2 100644
--- a/arch/powerpc/kernel/vdso64/vdso64.lds.S
+++ b/arch/powerpc/kernel/vdso64/vdso64.lds.S
@@ -4,7 +4,11 @@
  */
 #include <asm/vdso.h>
 
+#ifdef __LITTLE_ENDIAN__
+OUTPUT_FORMAT("elf64-powerpcle", "elf64-powerpcle", "elf64-powerpcle")
+#else
 OUTPUT_FORMAT("elf64-powerpc", "elf64-powerpc", "elf64-powerpc")
+#endif
 OUTPUT_ARCH(powerpc:common64)
 ENTRY(_start)
 
-- 
cgit v1.2.3


From 0b5e6661ac69983a54d9832ac33fd27d733306f8 Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:05:12 +1000
Subject: powerpc: Don't set HAVE_EFFICIENT_UNALIGNED_ACCESS on little endian
 builds

POWER7 takes alignment exceptions on some unaligned addresses, so
disable HAVE_EFFICIENT_UNALIGNED_ACCESS. This fixes an early boot
issue in the printk code.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 2c69c43ba68e..c5a868bc7aa4 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -97,7 +97,7 @@ config PPC
 	select VIRT_TO_BUS if !PPC64
 	select HAVE_IDE
 	select HAVE_IOREMAP_PROT
-	select HAVE_EFFICIENT_UNALIGNED_ACCESS
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS if !CPU_LITTLE_ENDIAN
 	select HAVE_KPROBES
 	select HAVE_ARCH_KGDB
 	select HAVE_KRETPROBES
-- 
cgit v1.2.3


From f036b368196263f648bede42bbbe1c1e6e834d10 Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 23 Sep 2013 12:05:13 +1000
Subject: powerpc: Work around little endian gcc bug

Temporarily work around an ICE we are seeing while building
in little endian mode:

http://gcc.gnu.org/bugzilla/show_bug.cgi?id=57134

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index d3c91bf923b7..607acf54a425 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -66,7 +66,7 @@ endif
 UTS_MACHINE := $(OLDARCH)
 
 ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
-override CC	+= -mlittle-endian
+override CC	+= -mlittle-endian -mno-strict-align
 override AS	+= -mlittle-endian
 override LD	+= -EL
 override CROSS32CC += -mlittle-endian
-- 
cgit v1.2.3


From 32dda05f4ec2b854b594bd91590c46c5197d77e1 Mon Sep 17 00:00:00 2001
From: Scott Wood
Date: Thu, 26 Sep 2013 19:18:18 -0500
Subject: powerpc/mpic: Disable preemption when calling mpic_processor_id()

Otherwise, we get a debug traceback due to the use of
smp_processor_id() (or get_paca()) inside hard_smp_processor_id().
mpic_host_map() is just looking for a default CPU, so it doesn't matter
if we migrate after getting the CPU ID.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/mpic.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 1be54faf60dd..bdcb8588e492 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1088,8 +1088,14 @@ static int mpic_host_map(struct irq_domain *h, unsigned int virq,
 	 * is done here.
 	 */
 	if (!mpic_is_ipi(mpic, hw) && (mpic->flags & MPIC_NO_RESET)) {
+		int cpu;
+
+		preempt_disable();
+		cpu = mpic_processor_id(mpic);
+		preempt_enable();
+
 		mpic_set_vector(virq, hw);
-		mpic_set_destination(virq, mpic_processor_id(mpic));
+		mpic_set_destination(virq, cpu);
 		mpic_irq_set_priority(virq, 8);
 	}
 
-- 
cgit v1.2.3


From dc1473dcfaf4fb38ba2dcb2fb7ac7d0242185fa3 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz
Date: Mon, 30 Sep 2013 15:11:42 +0200
Subject: powerpc/legacy_serial: Fix incorrect placement of __initdata tag

__initdata tag should be placed between the variable name and equal
sign for the variable to be placed in the intended .init.data section.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/legacy_serial.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 22e88dd2f34a..40bd7bd4e19a 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -35,7 +35,7 @@ static struct legacy_serial_info {
 	phys_addr_t			taddr;
 } legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
 
-static struct __initdata of_device_id legacy_serial_parents[] = {
+static struct of_device_id legacy_serial_parents[] __initdata = {
 	{.type = "soc",},
 	{.type = "tsi-bridge",},
 	{.type = "opb", },
-- 
cgit v1.2.3


From 1443d6a2a740b0b0dd644dba0fb96863eea238eb Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz
Date: Mon, 30 Sep 2013 15:13:55 +0200
Subject: powerpc/8xx/tqm8xx: Fix incorrect placement of __initdata tag

__initdata tag should be placed between the variable name and equal
sign for the variable to be placed in the intended .init.data section.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/8xx/tqm8xx_setup.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/8xx/tqm8xx_setup.c b/arch/powerpc/platforms/8xx/tqm8xx_setup.c
index 8d21ab70e06c..ef0778a0ca8f 100644
--- a/arch/powerpc/platforms/8xx/tqm8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/tqm8xx_setup.c
@@ -48,7 +48,7 @@ struct cpm_pin {
 	int port, pin, flags;
 };
 
-static struct __initdata cpm_pin tqm8xx_pins[] = {
+static struct cpm_pin tqm8xx_pins[] __initdata = {
 	/* SMC1 */
 	{CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
 	{CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
@@ -63,7 +63,7 @@ static struct __initdata cpm_pin tqm8xx_pins[] = {
 	{CPM_PORTC, 11, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO},
 };
 
-static struct __initdata cpm_pin tqm8xx_fec_pins[] = {
+static struct cpm_pin tqm8xx_fec_pins[] __initdata = {
 	/* MII */
 	{CPM_PORTD, 3, CPM_PIN_OUTPUT},
 	{CPM_PORTD, 4, CPM_PIN_OUTPUT},
-- 
cgit v1.2.3


From 0edfdd10f57bd989f7c2bc31ce6f601bbee1b664 Mon Sep 17 00:00:00 2001
From: Kevin Hao
Date: Thu, 26 Sep 2013 16:41:34 +0800
Subject: powerpc/ppc64: Remove the unneeded load of ti_flags in resume_kernel

We already got the value of current_thread_info and ti_flags and store
them into r9 and r4 respectively before jumping to resume_kernel. So
there is no reason to reload them again.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/entry_64.S | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 889ea2b19383..12679cd43e0c 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -673,9 +673,7 @@ _GLOBAL(ret_from_except_lite)
 
 resume_kernel:
 	/* check current_thread_info, _TIF_EMULATE_STACK_STORE */
-	CURRENT_THREAD_INFO(r9, r1)
-	ld	r8,TI_FLAGS(r9)
-	andis.	r8,r8,_TIF_EMULATE_STACK_STORE@h
+	andis.	r8,r4,_TIF_EMULATE_STACK_STORE@h
 	beq+	1f
 
 	addi	r8,r1,INT_FRAME_SIZE	/* Get the kprobed function entry */
-- 
cgit v1.2.3


From 8616dff5b0e969444cc8484875ebd936956b5c0d Mon Sep 17 00:00:00 2001
From: Vladimir Murzin
Date: Sun, 29 Sep 2013 14:41:18 +0200
Subject: powerpc: Fix section mismatch warning in free_lppacas

While cross-building for PPC64 I've got bunch of

WARNING: arch/powerpc/kernel/built-in.o(.text.unlikely+0x2d2): Section
mismatch in reference from the function .free_lppacas() to the variable
.init.data:lppaca_size The function .free_lppacas() references the variable
__initdata lppaca_size. This is often because .free_lppacas lacks a __initdata
annotation or the annotation of lppaca_size is wrong.

Fix it by using proper annotation for free_lppacas. Additionally, annotate
{allocate,new}_llpcas properly.

Signed-off-by: Vladimir Murzin <murzin.v@gmail.com>
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/paca.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index 3fc16e3beb9f..0620eaaaad45 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -46,7 +46,7 @@ struct lppaca lppaca[] = {
 static struct lppaca *extra_lppacas;
 static long __initdata lppaca_size;
 
-static void allocate_lppacas(int nr_cpus, unsigned long limit)
+static void __init allocate_lppacas(int nr_cpus, unsigned long limit)
 {
 	if (nr_cpus <= NR_LPPACAS)
 		return;
@@ -57,7 +57,7 @@ static void allocate_lppacas(int nr_cpus, unsigned long limit)
 						 PAGE_SIZE, limit));
 }
 
-static struct lppaca *new_lppaca(int cpu)
+static struct lppaca * __init new_lppaca(int cpu)
 {
 	struct lppaca *lp;
 
@@ -70,7 +70,7 @@ static struct lppaca *new_lppaca(int cpu)
 	return lp;
 }
 
-static void free_lppacas(void)
+static void __init free_lppacas(void)
 {
 	long new_size = 0, nr;
 
-- 
cgit v1.2.3


From 41b93b238ab394c8cf0935ec3ba31c700a2b3b25 Mon Sep 17 00:00:00 2001
From: Bharat Bhushan
Date: Wed, 9 Oct 2013 10:41:17 +0530
Subject: powerpc: Added __cmpdi2 for signed 64bit comparision

This was missing on powerpc and I am getting compilation error
drivers/vfio/pci/vfio_pci_rdwr.c:193: undefined reference to `__cmpdi2'
drivers/vfio/pci/vfio_pci_rdwr.c:193: undefined reference to `__cmpdi2'

Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/misc_32.S   | 14 ++++++++++++++
 arch/powerpc/kernel/ppc_ksyms.c |  2 ++
 2 files changed, 16 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 2b0ad9845363..e47d268727a4 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -658,6 +658,20 @@ _GLOBAL(__lshrdi3)
 	or	r4,r4,r7	# LSW |= t2
 	blr
 
+/*
+ * 64-bit comparison: __cmpdi2(s64 a, s64 b)
+ * Returns 0 if a < b, 1 if a == b, 2 if a > b.
+ */
+_GLOBAL(__cmpdi2)
+	cmpw	r3,r5
+	li	r3,1
+	bne	1f
+	cmplw	r4,r6
+	beqlr
+1:	li	r3,0
+	bltlr
+	li	r3,2
+	blr
 /*
  * 64-bit comparison: __ucmpdi2(u64 a, u64 b)
  * Returns 0 if a < b, 1 if a == b, 2 if a > b.
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 60bbeb29f9b8..d8c34073b42a 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -145,6 +145,8 @@ EXPORT_SYMBOL(__ashldi3);
 EXPORT_SYMBOL(__lshrdi3);
 int __ucmpdi2(unsigned long long, unsigned long long);
 EXPORT_SYMBOL(__ucmpdi2);
+int __cmpdi2(long long, long long);
+EXPORT_SYMBOL(__cmpdi2);
 #endif
 long long __bswapdi2(long long);
 EXPORT_SYMBOL(__bswapdi2);
-- 
cgit v1.2.3


From a4da0d50b2a00b79390092e6248ca88b7d93c81d Mon Sep 17 00:00:00 2001
From: Michael Ellerman
Date: Fri, 11 Oct 2013 14:07:57 +1100
Subject: powerpc: Implement arch_get_random_long/int() for powernv

Add the plumbing to implement arch_get_random_long/int(). It didn't seem
worth adding an extra ppc_md hook for int, so we reuse the one for long.

Add an implementation for powernv based on the hwrng found in power7+
systems. We whiten the output of the hwrng, and the result passes all
the dieharder tests.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Kconfig                    |   3 +
 arch/powerpc/include/asm/archrandom.h   |  32 +++++++++
 arch/powerpc/include/asm/machdep.h      |   4 ++
 arch/powerpc/platforms/powernv/Kconfig  |   1 +
 arch/powerpc/platforms/powernv/Makefile |   2 +-
 arch/powerpc/platforms/powernv/rng.c    | 122 ++++++++++++++++++++++++++++++++
 6 files changed, 163 insertions(+), 1 deletion(-)
 create mode 100644 arch/powerpc/include/asm/archrandom.h
 create mode 100644 arch/powerpc/platforms/powernv/rng.c

(limited to 'arch')

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index c5a868bc7aa4..875d815a8e7f 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -1012,6 +1012,9 @@ config PHYSICAL_START
 	default "0x00000000"
 endif
 
+config	ARCH_RANDOM
+	def_bool n
+
 source "net/Kconfig"
 
 source "drivers/Kconfig"
diff --git a/arch/powerpc/include/asm/archrandom.h b/arch/powerpc/include/asm/archrandom.h
new file mode 100644
index 000000000000..d853d163ba47
--- /dev/null
+++ b/arch/powerpc/include/asm/archrandom.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_POWERPC_ARCHRANDOM_H
+#define _ASM_POWERPC_ARCHRANDOM_H
+
+#ifdef CONFIG_ARCH_RANDOM
+
+#include <asm/machdep.h>
+
+static inline int arch_get_random_long(unsigned long *v)
+{
+	if (ppc_md.get_random_long)
+		return ppc_md.get_random_long(v);
+
+	return 0;
+}
+
+static inline int arch_get_random_int(unsigned int *v)
+{
+	unsigned long val;
+	int rc;
+
+	rc = arch_get_random_long(&val);
+	if (rc)
+		*v = val;
+
+	return rc;
+}
+
+int powernv_get_random_long(unsigned long *v);
+
+#endif /* CONFIG_ARCH_RANDOM */
+
+#endif /* _ASM_POWERPC_ARCHRANDOM_H */
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 8b480901165a..ce6cc2a7b8b9 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -263,6 +263,10 @@ struct machdep_calls {
 	ssize_t (*cpu_probe)(const char *, size_t);
 	ssize_t (*cpu_release)(const char *, size_t);
 #endif
+
+#ifdef CONFIG_ARCH_RANDOM
+	int (*get_random_long)(unsigned long *v);
+#endif
 };
 
 extern void e500_idle(void);
diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig
index 6fae5eb99ea6..21084645c70a 100644
--- a/arch/powerpc/platforms/powernv/Kconfig
+++ b/arch/powerpc/platforms/powernv/Kconfig
@@ -9,6 +9,7 @@ config PPC_POWERNV
 	select EPAPR_BOOT
 	select PPC_INDIRECT_PIO
 	select PPC_UDBG_16550
+	select ARCH_RANDOM
 	default y
 
 config POWERNV_MSI
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 300c437d713c..6760a86d5bd0 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -1,5 +1,5 @@
 obj-y			+= setup.o opal-takeover.o opal-wrappers.o opal.o
-obj-y			+= opal-rtc.o opal-nvram.o opal-lpc.o
+obj-y			+= opal-rtc.o opal-nvram.o opal-lpc.o rng.o
 
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_PCI)	+= pci.o pci-p5ioc2.o pci-ioda.o
diff --git a/arch/powerpc/platforms/powernv/rng.c b/arch/powerpc/platforms/powernv/rng.c
new file mode 100644
index 000000000000..02db7d73cf8b
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/rng.c
@@ -0,0 +1,122 @@
+/*
+ * Copyright 2013, Michael Ellerman, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define pr_fmt(fmt)	"powernv-rng: " fmt
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <asm/archrandom.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+
+
+struct powernv_rng {
+	void __iomem *regs;
+	unsigned long mask;
+};
+
+static DEFINE_PER_CPU(struct powernv_rng *, powernv_rng);
+
+
+static unsigned long rng_whiten(struct powernv_rng *rng, unsigned long val)
+{
+	unsigned long parity;
+
+	/* Calculate the parity of the value */
+	asm ("popcntd %0,%1" : "=r" (parity) : "r" (val));
+
+	/* xor our value with the previous mask */
+	val ^= rng->mask;
+
+	/* update the mask based on the parity of this value */
+	rng->mask = (rng->mask << 1) | (parity & 1);
+
+	return val;
+}
+
+int powernv_get_random_long(unsigned long *v)
+{
+	struct powernv_rng *rng;
+
+	rng = get_cpu_var(powernv_rng);
+
+	*v = rng_whiten(rng, in_be64(rng->regs));
+
+	put_cpu_var(rng);
+
+	return 1;
+}
+EXPORT_SYMBOL_GPL(powernv_get_random_long);
+
+static __init void rng_init_per_cpu(struct powernv_rng *rng,
+				    struct device_node *dn)
+{
+	int chip_id, cpu;
+
+	chip_id = of_get_ibm_chip_id(dn);
+	if (chip_id == -1)
+		pr_warn("No ibm,chip-id found for %s.\n", dn->full_name);
+
+	for_each_possible_cpu(cpu) {
+		if (per_cpu(powernv_rng, cpu) == NULL ||
+		    cpu_to_chip_id(cpu) == chip_id) {
+			per_cpu(powernv_rng, cpu) = rng;
+		}
+	}
+}
+
+static __init int rng_create(struct device_node *dn)
+{
+	struct powernv_rng *rng;
+	unsigned long val;
+
+	rng = kzalloc(sizeof(*rng), GFP_KERNEL);
+	if (!rng)
+		return -ENOMEM;
+
+	rng->regs = of_iomap(dn, 0);
+	if (!rng->regs) {
+		kfree(rng);
+		return -ENXIO;
+	}
+
+	val = in_be64(rng->regs);
+	rng->mask = val;
+
+	rng_init_per_cpu(rng, dn);
+
+	pr_info_once("Registering arch random hook.\n");
+
+	ppc_md.get_random_long = powernv_get_random_long;
+
+	return 0;
+}
+
+static __init int rng_init(void)
+{
+	struct device_node *dn;
+	int rc;
+
+	for_each_compatible_node(dn, NULL, "ibm,power-rng") {
+		rc = rng_create(dn);
+		if (rc) {
+			pr_err("Failed creating rng for %s (%d).\n",
+				dn->full_name, rc);
+			continue;
+		}
+
+		/* Create devices for hwrng driver */
+		of_platform_device_create(dn, NULL, NULL);
+	}
+
+	return 0;
+}
+subsys_initcall(rng_init);
-- 
cgit v1.2.3


From a489043f462639988f86c1cf49475580e9dba965 Mon Sep 17 00:00:00 2001
From: Michael Ellerman
Date: Fri, 11 Oct 2013 14:07:59 +1100
Subject: powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM

Add support for the arch_get_random_long() hook based on the H_RANDOM
hypervisor call. We trust the hypervisor to provide us with random data,
ie. we don't whiten it in anyway.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/pseries/Makefile |  2 +-
 arch/powerpc/platforms/pseries/rng.c    | 44 +++++++++++++++++++++++++++++++++
 2 files changed, 45 insertions(+), 1 deletion(-)
 create mode 100644 arch/powerpc/platforms/pseries/rng.c

(limited to 'arch')

diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 6c61ec5ee914..fbccac9cd2dc 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -3,7 +3,7 @@ ccflags-$(CONFIG_PPC_PSERIES_DEBUG)	+= -DDEBUG
 
 obj-y			:= lpar.o hvCall.o nvram.o reconfig.o \
 			   setup.o iommu.o event_sources.o ras.o \
-			   firmware.o power.o dlpar.o mobility.o
+			   firmware.o power.o dlpar.o mobility.o rng.o
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_SCANLOG)	+= scanlog.o
 obj-$(CONFIG_EEH)	+= eeh_pseries.o
diff --git a/arch/powerpc/platforms/pseries/rng.c b/arch/powerpc/platforms/pseries/rng.c
new file mode 100644
index 000000000000..a702f1c08242
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/rng.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2013, Michael Ellerman, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define pr_fmt(fmt)	"pseries-rng: " fmt
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <asm/archrandom.h>
+#include <asm/machdep.h>
+
+
+static int pseries_get_random_long(unsigned long *v)
+{
+	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
+
+	if (plpar_hcall(H_RANDOM, retbuf) == H_SUCCESS) {
+		*v = retbuf[0];
+		return 1;
+	}
+
+	return 0;
+}
+
+static __init int rng_init(void)
+{
+	struct device_node *dn;
+
+	dn = of_find_compatible_node(NULL, NULL, "ibm,random");
+	if (!dn)
+		return -ENODEV;
+
+	pr_info("Registering arch random hook.\n");
+
+	ppc_md.get_random_long = pseries_get_random_long;
+
+	return 0;
+}
+subsys_initcall(rng_init);
-- 
cgit v1.2.3


From cf059965713b71b7301fd88f1e98b31c6484dd46 Mon Sep 17 00:00:00 2001
From: Cedric Le Goater
Date: Mon, 23 Sep 2013 14:17:54 +0200
Subject: powerpc/kernel: Fix endian issue in rtas_pci

Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/rtas_pci.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 6e7b7cdeec65..7d4c7172f38e 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -223,7 +223,7 @@ unsigned long get_phb_buid(struct device_node *phb)
 static int phb_set_bus_ranges(struct device_node *dev,
 			      struct pci_controller *phb)
 {
-	const int *bus_range;
+	const __be32 *bus_range;
 	unsigned int len;
 
 	bus_range = of_get_property(dev, "bus-range", &len);
@@ -231,8 +231,8 @@ static int phb_set_bus_ranges(struct device_node *dev,
 		return 1;
  	}
 
-	phb->first_busno =  bus_range[0];
-	phb->last_busno  =  bus_range[1];
+	phb->first_busno = be32_to_cpu(bus_range[0]);
+	phb->last_busno  = be32_to_cpu(bus_range[1]);
 
 	return 0;
 }
-- 
cgit v1.2.3


From e48673360b8b113ca83dc3a45e02ad37fdf9f2d0 Mon Sep 17 00:00:00 2001
From: Kevin Hao
Date: Thu, 26 Sep 2013 16:23:56 +0800
Subject: powerpc/booke64: Check napping in performance monitor interrupt

The performance monitor interrupt is asynchronous, so we should check
if the current processor is in napping status in the handler of this
interrupt.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/exceptions-64e.S | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 2d067049db27..68d74b45232d 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -607,6 +607,7 @@ kernel_dbg_exc:
 	NORMAL_EXCEPTION_PROLOG(0x260, BOOKE_INTERRUPT_PERFORMANCE_MONITOR,
 				PROLOG_ADDITION_NONE)
 	EXCEPTION_COMMON(0x260, PACA_EXGEN, INTS_DISABLE)
+	CHECK_NAPPING()
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.performance_monitor_exception
 	b	.ret_from_except_lite
-- 
cgit v1.2.3


From dbd0c5d5296f291a5c3affee4fbdde254632ffca Mon Sep 17 00:00:00 2001
From: Laurent Dufour
Date: Tue, 17 Sep 2013 11:52:48 +0200
Subject: powerpc: prom_init exception when updating core value

Since the CPU is generating an exception when accessing unaligned word, and
as this exception is not yet handled when running prom_init, data should be
copied from the architecture vector byte per byte.

Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/prom_init.c | 28 ++++++++++++++++++++++------
 1 file changed, 22 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 5fe2842e8bab..cb64a6e1dc51 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -858,7 +858,8 @@ static void __init prom_send_capabilities(void)
 {
 	ihandle root;
 	prom_arg_t ret;
-	__be32 *cores;
+	u32 cores;
+	unsigned char *ptcores;
 
 	root = call_prom("open", 1, 1, ADDR("/"));
 	if (root != 0) {
@@ -868,15 +869,30 @@ static void __init prom_send_capabilities(void)
 		 * (we assume this is the same for all cores) and use it to
 		 * divide NR_CPUS.
 		 */
-		cores = (__be32 *)&ibm_architecture_vec[IBM_ARCH_VEC_NRCORES_OFFSET];
-		if (be32_to_cpup(cores) != NR_CPUS) {
+
+		/* The core value may start at an odd address. If such a word
+		 * access is made at a cache line boundary, this leads to an
+		 * exception which may not be handled at this time.
+		 * Forcing a per byte access to avoid exception.
+		 */
+		ptcores = &ibm_architecture_vec[IBM_ARCH_VEC_NRCORES_OFFSET];
+		cores = 0;
+		cores |= ptcores[0] << 24;
+		cores |= ptcores[1] << 16;
+		cores |= ptcores[2] << 8;
+		cores |= ptcores[3];
+		if (cores != NR_CPUS) {
 			prom_printf("WARNING ! "
 				    "ibm_architecture_vec structure inconsistent: %lu!\n",
-				    be32_to_cpup(cores));
+				    cores);
 		} else {
-			*cores = cpu_to_be32(DIV_ROUND_UP(NR_CPUS, prom_count_smt_threads()));
+			cores = DIV_ROUND_UP(NR_CPUS, prom_count_smt_threads());
 			prom_printf("Max number of cores passed to firmware: %lu (NR_CPUS = %lu)\n",
-				    be32_to_cpup(cores), NR_CPUS);
+				    cores, NR_CPUS);
+			ptcores[0] = (cores >> 24) & 0xff;
+			ptcores[1] = (cores >> 16) & 0xff;
+			ptcores[2] = (cores >> 8) & 0xff;
+			ptcores[3] = cores & 0xff;
 		}
 
 		/* try calling the ibm,client-architecture-support method */
-- 
cgit v1.2.3


From fed8393ef9f779e51c3e0c844e549e0bbc8d6dd4 Mon Sep 17 00:00:00 2001
From: Eugene Surovegin
Date: Fri, 20 Sep 2013 11:42:20 -0700
Subject: powerpc: Make kernel module helper endian-safe.

Signed-off-by: Eugene Surovegin <surovegin@google.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/module_64.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 6ee59a0eb268..a102f4412392 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -62,6 +62,16 @@ struct ppc64_stub_entry
    r2) into the stub. */
 static struct ppc64_stub_entry ppc64_stub =
 { .jump = {
+#ifdef __LITTLE_ENDIAN__
+	0x00, 0x00, 0x82, 0x3d, /* addis   r12,r2, <high> */
+	0x00, 0x00, 0x8c, 0x39, /* addi    r12,r12, <low> */
+	/* Save current r2 value in magic place on the stack. */
+	0x28, 0x00, 0x41, 0xf8, /* std     r2,40(r1) */
+	0x20, 0x00, 0x6c, 0xe9, /* ld      r11,32(r12) */
+	0x28, 0x00, 0x4c, 0xe8, /* ld      r2,40(r12) */
+	0xa6, 0x03, 0x69, 0x7d, /* mtctr   r11 */
+	0x20, 0x04, 0x80, 0x4e  /* bctr */
+#else
 	0x3d, 0x82, 0x00, 0x00, /* addis   r12,r2, <high> */
 	0x39, 0x8c, 0x00, 0x00, /* addi    r12,r12, <low> */
 	/* Save current r2 value in magic place on the stack. */
@@ -70,6 +80,7 @@ static struct ppc64_stub_entry ppc64_stub =
 	0xe8, 0x4c, 0x00, 0x28, /* ld      r2,40(r12) */
 	0x7d, 0x69, 0x03, 0xa6, /* mtctr   r11 */
 	0x4e, 0x80, 0x04, 0x20  /* bctr */
+#endif
 } };
 
 /* Count how many different 24-bit relocations (different symbol,
@@ -269,8 +280,13 @@ static inline int create_stub(Elf64_Shdr *sechdrs,
 
 	*entry = ppc64_stub;
 
+#ifdef __LITTLE_ENDIAN__
+	loc1 = (Elf64_Half *)&entry->jump[0];
+	loc2 = (Elf64_Half *)&entry->jump[4];
+#else
 	loc1 = (Elf64_Half *)&entry->jump[2];
 	loc2 = (Elf64_Half *)&entry->jump[6];
+#endif
 
 	/* Stub uses address relative to r2. */
 	reladdr = (unsigned long)entry - my_r2(sechdrs, me);
-- 
cgit v1.2.3


From 306474304fdfe3723562a02226c0a44e8078d3a0 Mon Sep 17 00:00:00 2001
From: Eugene Surovegin
Date: Fri, 20 Sep 2013 11:42:21 -0700
Subject: powerpc: Make ftrace endian-safe.

Signed-off-by: Eugene Surovegin <surovegin@google.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/ftrace.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
index 1fb78561096a..9b27b293a922 100644
--- a/arch/powerpc/kernel/ftrace.c
+++ b/arch/powerpc/kernel/ftrace.c
@@ -174,7 +174,11 @@ __ftrace_make_nop(struct module *mod,
 
 	pr_devel(" %08x %08x\n", jmp[0], jmp[1]);
 
+#ifdef __LITTLE_ENDIAN__
+	ptr = ((unsigned long)jmp[1] << 32) + jmp[0];
+#else
 	ptr = ((unsigned long)jmp[0] << 32) + jmp[1];
+#endif
 
 	/* This should match what was called */
 	if (ptr != ppc_function_entry((void *)addr)) {
-- 
cgit v1.2.3


From ac237b65f56c9b80d7774c35ccce15a74d445621 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Thu, 29 Aug 2013 16:55:07 +1000
Subject: powerpc: Enable /dev/port when isa_io_special is set

isa_io_special is set when the platform provides a "special"
implementation of inX/outX via some FW interface for example.

Such a platform doesn't need an ISA bridge on PCI, and so /dev/port
should be made available even if one isn't present.

This makes the LPC bus IOs accessible via /dev/port on PowerNV Power8

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/io.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index db1f29673c06..575fbf81fad0 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -21,7 +21,7 @@ extern struct pci_dev *isa_bridge_pcidev;
 /*
  * has legacy ISA devices ?
  */
-#define arch_has_dev_port()	(isa_bridge_pcidev != NULL)
+#define arch_has_dev_port()	(isa_bridge_pcidev != NULL || isa_io_special)
 #endif
 
 #include <linux/device.h>
-- 
cgit v1.2.3


From aaa63093dd4c393391a3368e1c7305b0cc620571 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Thu, 29 Aug 2013 16:55:45 +1000
Subject: powerpc/scom: Change scom_read() and scom_write() to return errors

scom_read() now returns the read value via a pointer argument and
both functions return an int error code

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/scom.h       | 23 +++++++++++++++++------
 arch/powerpc/platforms/wsp/scom_smp.c | 18 +++++++++++++-----
 arch/powerpc/platforms/wsp/scom_wsp.c | 12 ++++++++----
 arch/powerpc/platforms/wsp/wsp.c      | 13 +++++++------
 arch/powerpc/sysdev/scom.c            |  3 +--
 5 files changed, 46 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/scom.h b/arch/powerpc/include/asm/scom.h
index 0cabfd7bc2d1..07dcdcfdaefc 100644
--- a/arch/powerpc/include/asm/scom.h
+++ b/arch/powerpc/include/asm/scom.h
@@ -54,8 +54,8 @@ struct scom_controller {
 	scom_map_t (*map)(struct device_node *ctrl_dev, u64 reg, u64 count);
 	void (*unmap)(scom_map_t map);
 
-	u64 (*read)(scom_map_t map, u32 reg);
-	void (*write)(scom_map_t map, u32 reg, u64 value);
+	int (*read)(scom_map_t map, u32 reg, u64 *value);
+	int (*write)(scom_map_t map, u32 reg, u64 value);
 };
 
 extern const struct scom_controller *scom_controller;
@@ -133,10 +133,18 @@ static inline void scom_unmap(scom_map_t map)
  * scom_read - Read a SCOM register
  * @map: Result of scom_map
  * @reg: Register index within that map
+ * @value: Updated with the value read
+ *
+ * Returns 0 (success) or a negative error code
  */
-static inline u64 scom_read(scom_map_t map, u32 reg)
+static inline int scom_read(scom_map_t map, u32 reg, u64 *value)
 {
-	return scom_controller->read(map, reg);
+	int rc;
+
+	rc = scom_controller->read(map, reg, value);
+	if (rc)
+		*value = 0xfffffffffffffffful;
+	return rc;
 }
 
 /**
@@ -144,12 +152,15 @@ static inline u64 scom_read(scom_map_t map, u32 reg)
  * @map: Result of scom_map
  * @reg: Register index within that map
  * @value: Value to write
+ *
+ * Returns 0 (success) or a negative error code
  */
-static inline void scom_write(scom_map_t map, u32 reg, u64 value)
+static inline int scom_write(scom_map_t map, u32 reg, u64 value)
 {
-	scom_controller->write(map, reg, value);
+	return scom_controller->write(map, reg, value);
 }
 
+
 #endif /* CONFIG_PPC_SCOM */
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/platforms/wsp/scom_smp.c b/arch/powerpc/platforms/wsp/scom_smp.c
index b56b70aeb497..268bc899c1f7 100644
--- a/arch/powerpc/platforms/wsp/scom_smp.c
+++ b/arch/powerpc/platforms/wsp/scom_smp.c
@@ -116,7 +116,14 @@ static int a2_scom_ram(scom_map_t scom, int thread, u32 insn, int extmask)
 
 	scom_write(scom, SCOM_RAMIC, cmd);
 
-	while (!((val = scom_read(scom, SCOM_RAMC)) & mask)) {
+	for (;;) {
+		if (scom_read(scom, SCOM_RAMC, &val) != 0) {
+			pr_err("SCOM error on instruction 0x%08x, thread %d\n",
+			       insn, thread);
+			return -1;
+		}
+		if (val & mask)
+			break;
 		pr_devel("Waiting on RAMC = 0x%llx\n", val);
 		if (++n == 3) {
 			pr_err("RAMC timeout on instruction 0x%08x, thread %d\n",
@@ -151,9 +158,7 @@ static int a2_scom_getgpr(scom_map_t scom, int thread, int gpr, int alt,
 	if (rc)
 		return rc;
 
-	*out_gpr = scom_read(scom, SCOM_RAMD);
-
-	return 0;
+	return scom_read(scom, SCOM_RAMD, out_gpr);
 }
 
 static int a2_scom_getspr(scom_map_t scom, int thread, int spr, u64 *out_spr)
@@ -353,7 +358,10 @@ int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx, struct device_node *np)
 
 	pr_devel("Bringing up CPU%d using SCOM...\n", lcpu);
 
-	pccr0 = scom_read(scom, SCOM_PCCR0);
+	if (scom_read(scom, SCOM_PCCR0, &pccr0) != 0) {
+		printk(KERN_ERR "XSCOM failure readng PCCR0 on CPU%d\n", lcpu);
+		return -1;
+	}
 	scom_write(scom, SCOM_PCCR0, pccr0 | SCOM_PCCR0_ENABLE_DEBUG |
 				     SCOM_PCCR0_ENABLE_RAM);
 
diff --git a/arch/powerpc/platforms/wsp/scom_wsp.c b/arch/powerpc/platforms/wsp/scom_wsp.c
index 4052e2259f30..54172c4a8a64 100644
--- a/arch/powerpc/platforms/wsp/scom_wsp.c
+++ b/arch/powerpc/platforms/wsp/scom_wsp.c
@@ -50,18 +50,22 @@ static void wsp_scom_unmap(scom_map_t map)
 	iounmap((void *)map);
 }
 
-static u64 wsp_scom_read(scom_map_t map, u32 reg)
+static int wsp_scom_read(scom_map_t map, u32 reg, u64 *value)
 {
 	u64 __iomem *addr = (u64 __iomem *)map;
 
-	return in_be64(addr + reg);
+	*value = in_be64(addr + reg);
+
+	return 0;
 }
 
-static void wsp_scom_write(scom_map_t map, u32 reg, u64 value)
+static int wsp_scom_write(scom_map_t map, u32 reg, u64 value)
 {
 	u64 __iomem *addr = (u64 __iomem *)map;
 
-	return out_be64(addr + reg, value);
+	out_be64(addr + reg, value);
+
+	return 0;
 }
 
 static const struct scom_controller wsp_scom_controller = {
diff --git a/arch/powerpc/platforms/wsp/wsp.c b/arch/powerpc/platforms/wsp/wsp.c
index d25cc96c21b8..ddb6efe88914 100644
--- a/arch/powerpc/platforms/wsp/wsp.c
+++ b/arch/powerpc/platforms/wsp/wsp.c
@@ -89,6 +89,7 @@ void wsp_halt(void)
 	struct device_node *dn;
 	struct device_node *mine;
 	struct device_node *me;
+	int rc;
 
 	me = of_get_cpu_node(smp_processor_id(), NULL);
 	mine = scom_find_parent(me);
@@ -101,15 +102,15 @@ void wsp_halt(void)
 
 		/* read-modify-write it so the HW probe does not get
 		 * confused */
-		val = scom_read(m, 0);
-		val |= 1;
-		scom_write(m, 0, val);
+		rc = scom_read(m, 0, &val);
+		if (rc == 0)
+			scom_write(m, 0, val | 1);
 		scom_unmap(m);
 	}
 	m = scom_map(mine, 0, 1);
-	val = scom_read(m, 0);
-	val |= 1;
-	scom_write(m, 0, val);
+	rc = scom_read(m, 0, &val);
+	if (rc == 0)
+		scom_write(m, 0, val | 1);
 	/* should never return */
 	scom_unmap(m);
 }
diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/sysdev/scom.c
index 9193e12df695..10f1d9e56612 100644
--- a/arch/powerpc/sysdev/scom.c
+++ b/arch/powerpc/sysdev/scom.c
@@ -137,8 +137,7 @@ static int scom_val_get(void *data, u64 *val)
 	if (!scom_map_ok(ent->map))
 		return -EFAULT;
 
-	*val = scom_read(ent->map, 0);
-	return 0;
+	return scom_read(ent->map, 0, val);
 }
 DEFINE_SIMPLE_ATTRIBUTE(scom_val_fops, scom_val_get, scom_val_set,
 			"0x%llx\n");
-- 
cgit v1.2.3


From 5f33af4c0059255bcbf82a98a3789a01171b72e5 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Thu, 29 Aug 2013 16:56:16 +1000
Subject: powerpc/scom: Add support for "reg" property

When devices are direct children of a scom controller node, they
should be able to use the normal "reg" property instead of "scom-reg".

In that case, they also use #address-cells rather than #scom-cells
to indicate the size of an entry.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/scom.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/sysdev/scom.c
index 10f1d9e56612..413622d54395 100644
--- a/arch/powerpc/sysdev/scom.c
+++ b/arch/powerpc/sysdev/scom.c
@@ -53,7 +53,7 @@ scom_map_t scom_map_device(struct device_node *dev, int index)
 {
 	struct device_node *parent;
 	unsigned int cells, size;
-	const u32 *prop;
+	const __be32 *prop, *sprop;
 	u64 reg, cnt;
 	scom_map_t ret;
 
@@ -62,12 +62,24 @@ scom_map_t scom_map_device(struct device_node *dev, int index)
 	if (parent == NULL)
 		return 0;
 
-	prop = of_get_property(parent, "#scom-cells", NULL);
-	cells = prop ? *prop : 1;
-
+	/*
+	 * We support "scom-reg" properties for adding scom registers
+	 * to a random device-tree node with an explicit scom-parent
+	 *
+	 * We also support the simple "reg" property if the device is
+	 * a direct child of a scom controller.
+	 *
+	 * In case both exist, "scom-reg" takes precedence.
+	 */
 	prop = of_get_property(dev, "scom-reg", &size);
+	sprop = of_get_property(parent, "#scom-cells", NULL);
+	if (!prop && parent == dev->parent) {
+		prop = of_get_property(dev, "reg", &size);
+		sprop = of_get_property(parent, "#address-cells", NULL);
+	}
 	if (!prop)
-		return 0;
+		return NULL;
+	cells = sprop ? be32_to_cpup(sprop) : 1;
 	size >>= 2;
 
 	if (index >= (size / (2*cells)))
-- 
cgit v1.2.3


From 762fd3ab6d2c4b438ce49f54860dc509e591209c Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Thu, 29 Aug 2013 16:56:59 +1000
Subject: powerpc/scom: Create debugfs files using ibm,chip-id if available

When creating the debugfs scom files, use "ibm,chip-id" as the scom%d
index rather than a simple made up number when possible.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/scom.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/sysdev/scom.c
index 413622d54395..cb20d542a5aa 100644
--- a/arch/powerpc/sysdev/scom.c
+++ b/arch/powerpc/sysdev/scom.c
@@ -196,8 +196,13 @@ static int scom_debug_init(void)
 		return -1;
 
 	i = rc = 0;
-	for_each_node_with_property(dn, "scom-controller")
-		rc |= scom_debug_init_one(root, dn, i++);
+	for_each_node_with_property(dn, "scom-controller") {
+		int id = of_get_ibm_chip_id(dn);
+		if (id == -1)
+			id = i;
+		rc |= scom_debug_init_one(root, dn, id);
+		i++;
+	}
 
 	return rc;
 }
-- 
cgit v1.2.3


From 8adae0c8d822e54242694cdfed33cc9c346d607a Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Thu, 29 Aug 2013 16:57:33 +1000
Subject: powerpc/powernv: Add scom support under OPALv3

OPAL v3 provides interfaces to access the chips XSCOM, expose
this via the existing scom infrastructure.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powernv/Kconfig      |   1 +
 arch/powerpc/platforms/powernv/Makefile     |   1 +
 arch/powerpc/platforms/powernv/opal-xscom.c | 105 ++++++++++++++++++++++++++++
 3 files changed, 107 insertions(+)
 create mode 100644 arch/powerpc/platforms/powernv/opal-xscom.c

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig
index 21084645c70a..9fced3f6d2dc 100644
--- a/arch/powerpc/platforms/powernv/Kconfig
+++ b/arch/powerpc/platforms/powernv/Kconfig
@@ -9,6 +9,7 @@ config PPC_POWERNV
 	select EPAPR_BOOT
 	select PPC_INDIRECT_PIO
 	select PPC_UDBG_16550
+	select PPC_SCOM
 	select ARCH_RANDOM
 	default y
 
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 6760a86d5bd0..050d57e0c788 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -4,3 +4,4 @@ obj-y			+= opal-rtc.o opal-nvram.o opal-lpc.o rng.o
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_PCI)	+= pci.o pci-p5ioc2.o pci-ioda.o
 obj-$(CONFIG_EEH)	+= eeh-ioda.o eeh-powernv.o
+obj-$(CONFIG_PPC_SCOM)	+= opal-xscom.o
diff --git a/arch/powerpc/platforms/powernv/opal-xscom.c b/arch/powerpc/platforms/powernv/opal-xscom.c
new file mode 100644
index 000000000000..3ed5c6498324
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-xscom.c
@@ -0,0 +1,105 @@
+/*
+ * PowerNV LPC bus handling.
+ *
+ * Copyright 2013 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/bug.h>
+#include <linux/gfp.h>
+#include <linux/slab.h>
+
+#include <asm/machdep.h>
+#include <asm/firmware.h>
+#include <asm/opal.h>
+#include <asm/scom.h>
+
+/*
+ * We could probably fit that inside the scom_map_t
+ * which is a void* after all but it's really too ugly
+ * so let's kmalloc it for now
+ */
+struct opal_scom_map {
+	uint32_t chip;
+	uint32_t addr;
+};
+
+static scom_map_t opal_scom_map(struct device_node *dev, u64 reg, u64 count)
+{
+	struct opal_scom_map *m;
+	const __be32 *gcid;
+
+	if (!of_get_property(dev, "scom-controller", NULL)) {
+		pr_err("%s: device %s is not a SCOM controller\n",
+			__func__, dev->full_name);
+		return SCOM_MAP_INVALID;
+	}
+	gcid = of_get_property(dev, "ibm,chip-id", NULL);
+	if (!gcid) {
+		pr_err("%s: device %s has no ibm,chip-id\n",
+			__func__, dev->full_name);
+		return SCOM_MAP_INVALID;
+	}
+	m = kmalloc(sizeof(struct opal_scom_map), GFP_KERNEL);
+	if (!m)
+		return NULL;
+	m->chip = be32_to_cpup(gcid);
+	m->addr = reg;
+
+	return (scom_map_t)m;
+}
+
+static void opal_scom_unmap(scom_map_t map)
+{
+	kfree(map);
+}
+
+static int opal_xscom_err_xlate(int64_t rc)
+{
+	switch(rc) {
+	case 0:
+		return 0;
+	/* Add more translations if necessary */
+	default:
+		return -EIO;
+	}
+}
+
+static int opal_scom_read(scom_map_t map, u32 reg, u64 *value)
+{
+	struct opal_scom_map *m = map;
+	int64_t rc;
+
+	rc = opal_xscom_read(m->chip, m->addr + reg, (uint64_t *)__pa(value));
+	return opal_xscom_err_xlate(rc);
+}
+
+static int opal_scom_write(scom_map_t map, u32 reg, u64 value)
+{
+	struct opal_scom_map *m = map;
+	int64_t rc;
+
+	rc = opal_xscom_write(m->chip, m->addr + reg, value);
+	return opal_xscom_err_xlate(rc);
+}
+
+static const struct scom_controller opal_scom_controller = {
+	.map	= opal_scom_map,
+	.unmap	= opal_scom_unmap,
+	.read	= opal_scom_read,
+	.write	= opal_scom_write
+};
+
+static int opal_xscom_init(void)
+{
+	if (firmware_has_feature(FW_FEATURE_OPALv3))
+		scom_init(&opal_scom_controller);
+	return 0;
+}
+arch_initcall(opal_xscom_init);
-- 
cgit v1.2.3


From 4777f79689bc722d12b3cfa1e2e92809cbe7bb38 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Thu, 29 Aug 2013 16:58:12 +1000
Subject: powerpc/scom: CONFIG_SCOM_DEBUGFS should depend on CONFIG_DEBUG_FS

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig
index ab4cb5476472..13ec968be4c7 100644
--- a/arch/powerpc/sysdev/Kconfig
+++ b/arch/powerpc/sysdev/Kconfig
@@ -28,7 +28,7 @@ config PPC_SCOM
 
 config SCOM_DEBUGFS
 	bool "Expose SCOM controllers via debugfs"
-	depends on PPC_SCOM
+	depends on PPC_SCOM && DEBUG_FS
 	default n
 
 config GE_FPGA
-- 
cgit v1.2.3


From 81fafea67a2ea418673df2df2b22a81f0c5a455a Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Thu, 29 Aug 2013 17:25:35 +1000
Subject: powerpc/scom: Use "devspec" rather than "path" in debugfs entries

This is the traditional name for device-tree path, used in sysfs,
do the same for the XSCOM debugfs files.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/scom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/sysdev/scom.c
index cb20d542a5aa..3963d995648a 100644
--- a/arch/powerpc/sysdev/scom.c
+++ b/arch/powerpc/sysdev/scom.c
@@ -180,7 +180,7 @@ static int scom_debug_init_one(struct dentry *root, struct device_node *dn,
 
 	debugfs_create_file("addr", 0600, dir, ent, &scom_addr_fops);
 	debugfs_create_file("value", 0600, dir, ent, &scom_val_fops);
-	debugfs_create_blob("path", 0400, dir, &ent->blob);
+	debugfs_create_blob("devspec", 0400, dir, &ent->blob);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 20bb842b9b0e26a5768b62ee639e64a2ecaada8c Mon Sep 17 00:00:00 2001
From: Gavin Shan
Date: Fri, 6 Sep 2013 09:00:00 +0800
Subject: powerpc/powernv: Enable EEH for PHB3

The EEH isn't enabled for PHB3 and the patch intends to enable it.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powernv/eeh-ioda.c    | 26 +++++++++++---------------
 arch/powerpc/platforms/powernv/eeh-powernv.c |  5 +----
 2 files changed, 12 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
index cf42e74514fa..799ccaa07b80 100644
--- a/arch/powerpc/platforms/powernv/eeh-ioda.c
+++ b/arch/powerpc/platforms/powernv/eeh-ioda.c
@@ -106,27 +106,23 @@ static int ioda_eeh_post_init(struct pci_controller *hose)
 		ioda_eeh_nb_init = 1;
 	}
 
-	/* FIXME: Enable it for PHB3 later */
-	if (phb->type == PNV_PHB_IODA1) {
+	/* We needn't HUB diag-data on PHB3 */
+	if (phb->type == PNV_PHB_IODA1 && !hub_diag) {
+		hub_diag = (char *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
 		if (!hub_diag) {
-			hub_diag = (char *)__get_free_page(GFP_KERNEL |
-							   __GFP_ZERO);
-			if (!hub_diag) {
-				pr_err("%s: Out of memory !\n",
-				       __func__);
-				return -ENOMEM;
-			}
+			pr_err("%s: Out of memory !\n", __func__);
+			return -ENOMEM;
 		}
+	}
 
 #ifdef CONFIG_DEBUG_FS
-		if (phb->dbgfs)
-			debugfs_create_file("err_injct", 0600,
-					    phb->dbgfs, hose,
-					    &ioda_eeh_dbgfs_ops);
+	if (phb->dbgfs)
+		debugfs_create_file("err_injct", 0600,
+				    phb->dbgfs, hose,
+				    &ioda_eeh_dbgfs_ops);
 #endif
 
-		phb->eeh_state |= PNV_EEH_STATE_ENABLED;
-	}
+	phb->eeh_state |= PNV_EEH_STATE_ENABLED;
 
 	return 0;
 }
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 79663d26e6ea..73b981438cc5 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -144,11 +144,8 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 	/*
 	 * Enable EEH explicitly so that we will do EEH check
 	 * while accessing I/O stuff
-	 *
-	 * FIXME: Enable that for PHB3 later
 	 */
-	if (phb->type == PNV_PHB_IODA1)
-		eeh_subsystem_enabled = 1;
+	eeh_subsystem_enabled = 1;
 
 	/* Save memory bars */
 	eeh_save_bars(edev);
-- 
cgit v1.2.3


From ff6bdcd967f6f5ca870a42a744acc8788faaa1d2 Mon Sep 17 00:00:00 2001
From: Gavin Shan
Date: Fri, 6 Sep 2013 09:00:01 +0800
Subject: powerpc/powernv: Support inbound error injection

For now, we only support outbound error injection. Actually, the
hardware supports injecting inbound errors as well. The patch enables
to inject inbound errors.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powernv/eeh-ioda.c | 59 ++++++++++++++++++++++++++-----
 1 file changed, 50 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
index 799ccaa07b80..34e0583106cf 100644
--- a/arch/powerpc/platforms/powernv/eeh-ioda.c
+++ b/arch/powerpc/platforms/powernv/eeh-ioda.c
@@ -59,26 +59,60 @@ static struct notifier_block ioda_eeh_nb = {
 };
 
 #ifdef CONFIG_DEBUG_FS
-static int ioda_eeh_dbgfs_set(void *data, u64 val)
+static int ioda_eeh_dbgfs_set(void *data, int offset, u64 val)
 {
 	struct pci_controller *hose = data;
 	struct pnv_phb *phb = hose->private_data;
 
-	out_be64(phb->regs + 0xD10, val);
+	out_be64(phb->regs + offset, val);
 	return 0;
 }
 
-static int ioda_eeh_dbgfs_get(void *data, u64 *val)
+static int ioda_eeh_dbgfs_get(void *data, int offset, u64 *val)
 {
 	struct pci_controller *hose = data;
 	struct pnv_phb *phb = hose->private_data;
 
-	*val = in_be64(phb->regs + 0xD10);
+	*val = in_be64(phb->regs + offset);
 	return 0;
 }
 
-DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_dbgfs_ops, ioda_eeh_dbgfs_get,
-			ioda_eeh_dbgfs_set, "0x%llx\n");
+static int ioda_eeh_outb_dbgfs_set(void *data, u64 val)
+{
+	return ioda_eeh_dbgfs_set(data, 0xD10, val);
+}
+
+static int ioda_eeh_outb_dbgfs_get(void *data, u64 *val)
+{
+	return ioda_eeh_dbgfs_get(data, 0xD10, val);
+}
+
+static int ioda_eeh_inbA_dbgfs_set(void *data, u64 val)
+{
+	return ioda_eeh_dbgfs_set(data, 0xD90, val);
+}
+
+static int ioda_eeh_inbA_dbgfs_get(void *data, u64 *val)
+{
+	return ioda_eeh_dbgfs_get(data, 0xD90, val);
+}
+
+static int ioda_eeh_inbB_dbgfs_set(void *data, u64 val)
+{
+	return ioda_eeh_dbgfs_set(data, 0xE10, val);
+}
+
+static int ioda_eeh_inbB_dbgfs_get(void *data, u64 *val)
+{
+	return ioda_eeh_dbgfs_get(data, 0xE10, val);
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_outb_dbgfs_ops, ioda_eeh_outb_dbgfs_get,
+			ioda_eeh_outb_dbgfs_set, "0x%llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_inbA_dbgfs_ops, ioda_eeh_inbA_dbgfs_get,
+			ioda_eeh_inbA_dbgfs_set, "0x%llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_inbB_dbgfs_ops, ioda_eeh_inbB_dbgfs_get,
+			ioda_eeh_inbB_dbgfs_set, "0x%llx\n");
 #endif /* CONFIG_DEBUG_FS */
 
 /**
@@ -116,10 +150,17 @@ static int ioda_eeh_post_init(struct pci_controller *hose)
 	}
 
 #ifdef CONFIG_DEBUG_FS
-	if (phb->dbgfs)
-		debugfs_create_file("err_injct", 0600,
+	if (phb->dbgfs) {
+		debugfs_create_file("err_injct_outbound", 0600,
+				    phb->dbgfs, hose,
+				    &ioda_eeh_outb_dbgfs_ops);
+		debugfs_create_file("err_injct_inboundA", 0600,
 				    phb->dbgfs, hose,
-				    &ioda_eeh_dbgfs_ops);
+				    &ioda_eeh_inbA_dbgfs_ops);
+		debugfs_create_file("err_injct_inboundB", 0600,
+				    phb->dbgfs, hose,
+				    &ioda_eeh_inbB_dbgfs_ops);
+	}
 #endif
 
 	phb->eeh_state |= PNV_EEH_STATE_ENABLED;
-- 
cgit v1.2.3


From 98cea5fec48a4af8498a0c5c5fccf64f82fc1ce2 Mon Sep 17 00:00:00 2001
From: Gavin Shan
Date: Fri, 6 Sep 2013 09:00:02 +0800
Subject: powerpc/eeh: Output error number

The patch prints the error number while failing to retrieve error
log from firmware. It's helpful for debugging.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powernv/eeh-ioda.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
index 34e0583106cf..f426f4c24fb6 100644
--- a/arch/powerpc/platforms/powernv/eeh-ioda.c
+++ b/arch/powerpc/platforms/powernv/eeh-ioda.c
@@ -583,8 +583,8 @@ static int ioda_eeh_get_log(struct eeh_pe *pe, int severity,
 			phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE);
 	if (ret) {
 		spin_unlock_irqrestore(&phb->lock, flags);
-		pr_warning("%s: Failed to get log for PHB#%x-PE#%x\n",
-			   __func__, hose->global_number, pe->addr);
+		pr_warning("%s: Can't get log for PHB#%x-PE#%x (%lld)\n",
+			   __func__, hose->global_number, pe->addr, ret);
 		return -EIO;
 	}
 
-- 
cgit v1.2.3


From 5c9d6d759b3be9f9bdd6f7e5f440d870a4ec675a Mon Sep 17 00:00:00 2001
From: Gavin Shan
Date: Fri, 6 Sep 2013 09:00:03 +0800
Subject: powerpc/powernv: Double size of log blob

Each PHB instance (struct pnv_phb) has its corresponding log blob,
which is used to hold the retrieved error log from firmware. The
current size of that (4096) isn't enough for PHB3 case and the patch
makes that double to 8192.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powernv/pci.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index dfe20104238e..d0bb5204ece3 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -17,7 +17,7 @@ enum pnv_phb_model {
 	PNV_PHB_MODEL_PHB3,
 };
 
-#define PNV_PCI_DIAG_BUF_SIZE	4096
+#define PNV_PCI_DIAG_BUF_SIZE	8192
 #define PNV_IODA_PE_DEV		(1 << 0)	/* PE has single PCI device	*/
 #define PNV_IODA_PE_BUS		(1 << 1)	/* PE has primary PCI bus	*/
 #define PNV_IODA_PE_BUS_ALL	(1 << 2)	/* PE has subordinate buses	*/
-- 
cgit v1.2.3


From 8c6852e036daa512376de381a3b61547d90465d4 Mon Sep 17 00:00:00 2001
From: Gavin Shan
Date: Fri, 6 Sep 2013 09:00:04 +0800
Subject: powerpc/eeh: Output PHB3 diag-data

The patch adds function ioda_eeh_phb3_phb_diag() to dump PHB3
PHB diag-data. That's called while detecting informative errors
or frozen PE on the specific PHB.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/opal.h           | 65 ++++++++++++++++++++++++++++
 arch/powerpc/platforms/powernv/eeh-ioda.c | 70 +++++++++++++++++++++++++++++++
 2 files changed, 135 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 51e3b265ec12..4cc33ba1edd3 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -460,10 +460,12 @@ enum {
 
 enum {
 	OPAL_PHB_ERROR_DATA_TYPE_P7IOC = 1,
+	OPAL_PHB_ERROR_DATA_TYPE_PHB3 = 2
 };
 
 enum {
 	OPAL_P7IOC_NUM_PEST_REGS = 128,
+	OPAL_PHB3_NUM_PEST_REGS = 256
 };
 
 struct OpalIoPhbErrorCommon {
@@ -531,6 +533,69 @@ struct OpalIoP7IOCPhbErrorData {
 	uint64_t pestB[OPAL_P7IOC_NUM_PEST_REGS];
 };
 
+struct OpalIoPhb3ErrorData {
+	struct OpalIoPhbErrorCommon common;
+
+	uint32_t brdgCtl;
+
+	/* PHB3 UTL regs */
+	uint32_t portStatusReg;
+	uint32_t rootCmplxStatus;
+	uint32_t busAgentStatus;
+
+	/* PHB3 cfg regs */
+	uint32_t deviceStatus;
+	uint32_t slotStatus;
+	uint32_t linkStatus;
+	uint32_t devCmdStatus;
+	uint32_t devSecStatus;
+
+	/* cfg AER regs */
+	uint32_t rootErrorStatus;
+	uint32_t uncorrErrorStatus;
+	uint32_t corrErrorStatus;
+	uint32_t tlpHdr1;
+	uint32_t tlpHdr2;
+	uint32_t tlpHdr3;
+	uint32_t tlpHdr4;
+	uint32_t sourceId;
+
+	uint32_t rsv3;
+
+	/* Record data about the call to allocate a buffer */
+	uint64_t errorClass;
+	uint64_t correlator;
+
+	uint64_t nFir;			/* 000 */
+	uint64_t nFirMask;		/* 003 */
+	uint64_t nFirWOF;		/* 008 */
+
+	/* PHB3 MMIO Error Regs */
+	uint64_t phbPlssr;		/* 120 */
+	uint64_t phbCsr;		/* 110 */
+	uint64_t lemFir;		/* C00 */
+	uint64_t lemErrorMask;		/* C18 */
+	uint64_t lemWOF;		/* C40 */
+	uint64_t phbErrorStatus;	/* C80 */
+	uint64_t phbFirstErrorStatus;	/* C88 */
+	uint64_t phbErrorLog0;		/* CC0 */
+	uint64_t phbErrorLog1;		/* CC8 */
+	uint64_t mmioErrorStatus;	/* D00 */
+	uint64_t mmioFirstErrorStatus;	/* D08 */
+	uint64_t mmioErrorLog0;		/* D40 */
+	uint64_t mmioErrorLog1;		/* D48 */
+	uint64_t dma0ErrorStatus;	/* D80 */
+	uint64_t dma0FirstErrorStatus;	/* D88 */
+	uint64_t dma0ErrorLog0;		/* DC0 */
+	uint64_t dma0ErrorLog1;		/* DC8 */
+	uint64_t dma1ErrorStatus;	/* E00 */
+	uint64_t dma1FirstErrorStatus;	/* E08 */
+	uint64_t dma1ErrorLog0;		/* E40 */
+	uint64_t dma1ErrorLog1;		/* E48 */
+	uint64_t pestA[OPAL_PHB3_NUM_PEST_REGS];
+	uint64_t pestB[OPAL_PHB3_NUM_PEST_REGS];
+};
+
 typedef struct oppanel_line {
 	const char * 	line;
 	uint64_t 	line_len;
diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
index f426f4c24fb6..02245cee7818 100644
--- a/arch/powerpc/platforms/powernv/eeh-ioda.c
+++ b/arch/powerpc/platforms/powernv/eeh-ioda.c
@@ -747,6 +747,73 @@ static void ioda_eeh_p7ioc_phb_diag(struct pci_controller *hose,
 	}
 }
 
+static void ioda_eeh_phb3_phb_diag(struct pci_controller *hose,
+				    struct OpalIoPhbErrorCommon *common)
+{
+	struct OpalIoPhb3ErrorData *data;
+	int i;
+
+	data = (struct OpalIoPhb3ErrorData*)common;
+	pr_info("PHB3 PHB#%x Diag-data (Version: %d)\n\n",
+		hose->global_number, common->version);
+
+	pr_info("  brdgCtl:              %08x\n", data->brdgCtl);
+
+	pr_info("  portStatusReg:        %08x\n", data->portStatusReg);
+	pr_info("  rootCmplxStatus:      %08x\n", data->rootCmplxStatus);
+	pr_info("  busAgentStatus:       %08x\n", data->busAgentStatus);
+
+	pr_info("  deviceStatus:         %08x\n", data->deviceStatus);
+	pr_info("  slotStatus:           %08x\n", data->slotStatus);
+	pr_info("  linkStatus:           %08x\n", data->linkStatus);
+	pr_info("  devCmdStatus:         %08x\n", data->devCmdStatus);
+	pr_info("  devSecStatus:         %08x\n", data->devSecStatus);
+
+	pr_info("  rootErrorStatus:      %08x\n", data->rootErrorStatus);
+	pr_info("  uncorrErrorStatus:    %08x\n", data->uncorrErrorStatus);
+	pr_info("  corrErrorStatus:      %08x\n", data->corrErrorStatus);
+	pr_info("  tlpHdr1:              %08x\n", data->tlpHdr1);
+	pr_info("  tlpHdr2:              %08x\n", data->tlpHdr2);
+	pr_info("  tlpHdr3:              %08x\n", data->tlpHdr3);
+	pr_info("  tlpHdr4:              %08x\n", data->tlpHdr4);
+	pr_info("  sourceId:             %08x\n", data->sourceId);
+	pr_info("  errorClass:           %016llx\n", data->errorClass);
+	pr_info("  correlator:           %016llx\n", data->correlator);
+	pr_info("  nFir:                 %016llx\n", data->nFir);
+	pr_info("  nFirMask:             %016llx\n", data->nFirMask);
+	pr_info("  nFirWOF:              %016llx\n", data->nFirWOF);
+	pr_info("  PhbPlssr:             %016llx\n", data->phbPlssr);
+	pr_info("  PhbCsr:               %016llx\n", data->phbCsr);
+	pr_info("  lemFir:               %016llx\n", data->lemFir);
+	pr_info("  lemErrorMask:         %016llx\n", data->lemErrorMask);
+	pr_info("  lemWOF:               %016llx\n", data->lemWOF);
+	pr_info("  phbErrorStatus:       %016llx\n", data->phbErrorStatus);
+	pr_info("  phbFirstErrorStatus:  %016llx\n", data->phbFirstErrorStatus);
+	pr_info("  phbErrorLog0:         %016llx\n", data->phbErrorLog0);
+	pr_info("  phbErrorLog1:         %016llx\n", data->phbErrorLog1);
+	pr_info("  mmioErrorStatus:      %016llx\n", data->mmioErrorStatus);
+	pr_info("  mmioFirstErrorStatus: %016llx\n", data->mmioFirstErrorStatus);
+	pr_info("  mmioErrorLog0:        %016llx\n", data->mmioErrorLog0);
+	pr_info("  mmioErrorLog1:        %016llx\n", data->mmioErrorLog1);
+	pr_info("  dma0ErrorStatus:      %016llx\n", data->dma0ErrorStatus);
+	pr_info("  dma0FirstErrorStatus: %016llx\n", data->dma0FirstErrorStatus);
+	pr_info("  dma0ErrorLog0:        %016llx\n", data->dma0ErrorLog0);
+	pr_info("  dma0ErrorLog1:        %016llx\n", data->dma0ErrorLog1);
+	pr_info("  dma1ErrorStatus:      %016llx\n", data->dma1ErrorStatus);
+	pr_info("  dma1FirstErrorStatus: %016llx\n", data->dma1FirstErrorStatus);
+	pr_info("  dma1ErrorLog0:        %016llx\n", data->dma1ErrorLog0);
+	pr_info("  dma1ErrorLog1:        %016llx\n", data->dma1ErrorLog1);
+
+	for (i = 0; i < OPAL_PHB3_NUM_PEST_REGS; i++) {
+		if ((data->pestA[i] >> 63) == 0 &&
+		    (data->pestB[i] >> 63) == 0)
+			continue;
+
+		pr_info("  PE[%3d] PESTA:        %016llx\n", i, data->pestA[i]);
+		pr_info("          PESTB:        %016llx\n", data->pestB[i]);
+	}
+}
+
 static void ioda_eeh_phb_diag(struct pci_controller *hose)
 {
 	struct pnv_phb *phb = hose->private_data;
@@ -765,6 +832,9 @@ static void ioda_eeh_phb_diag(struct pci_controller *hose)
 	case OPAL_PHB_ERROR_DATA_TYPE_P7IOC:
 		ioda_eeh_p7ioc_phb_diag(hose, common);
 		break;
+	case OPAL_PHB_ERROR_DATA_TYPE_PHB3:
+		ioda_eeh_phb3_phb_diag(hose, common);
+		break;
 	default:
 		pr_warning("%s: Unrecognized I/O chip %d\n",
 			   __func__, common->ioType);
-- 
cgit v1.2.3


From 5293bf97a27e1be8ac6096aa198ff6a9e3e6837c Mon Sep 17 00:00:00 2001
From: Gavin Shan
Date: Fri, 6 Sep 2013 09:00:05 +0800
Subject: powerpc/eeh: Reorder output messages

We already had some output messages from EEH core. Occasionally,
we can see the output messages from EEH core before the stack
dump. That's not what we expected. The patch fixes that and shows
the stack dump prior to output messages from EEH core.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/eeh.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 55593ee2d5aa..1fb331db34c8 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -327,11 +327,11 @@ static int eeh_phb_check_failure(struct eeh_pe *pe)
 	/* Isolate the PHB and send event */
 	eeh_pe_state_mark(phb_pe, EEH_PE_ISOLATED);
 	eeh_serialize_unlock(flags);
-	eeh_send_failure_event(phb_pe);
 
 	pr_err("EEH: PHB#%x failure detected\n",
 		phb_pe->phb->global_number);
 	dump_stack();
+	eeh_send_failure_event(phb_pe);
 
 	return 1;
 out:
@@ -454,8 +454,6 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
 	eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
 	eeh_serialize_unlock(flags);
 
-	eeh_send_failure_event(pe);
-
 	/* Most EEH events are due to device driver bugs.  Having
 	 * a stack trace will help the device-driver authors figure
 	 * out what happened.  So print that out.
@@ -464,6 +462,8 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
 		pe->addr, pe->phb->global_number);
 	dump_stack();
 
+	eeh_send_failure_event(pe);
+
 	return 1;
 
 dn_unlock:
-- 
cgit v1.2.3


From 8e0861fa3c4edfc2f30dd4cf4d58d3929f7c1b23 Mon Sep 17 00:00:00 2001
From: Alexey Kardashevskiy
Date: Wed, 28 Aug 2013 18:37:42 +1000
Subject: powerpc: Prepare to support kernel handling of IOMMU map/unmap

The current VFIO-on-POWER implementation supports only user mode
driven mapping, i.e. QEMU is sending requests to map/unmap pages.
However this approach is really slow, so we want to move that to KVM.
Since H_PUT_TCE can be extremely performance sensitive (especially with
network adapters where each packet needs to be mapped/unmapped) we chose
to implement that as a "fast" hypercall directly in "real
mode" (processor still in the guest context but MMU off).

To be able to do that, we need to provide some facilities to
access the struct page count within that real mode environment as things
like the sparsemem vmemmap mappings aren't accessible.

This adds an API function realmode_pfn_to_page() to get page struct when
MMU is off.

This adds to MM a new function put_page_unless_one() which drops a page
if counter is bigger than 1. It is going to be used when MMU is off
(for example, real mode on PPC64) and we want to make sure that page
release will not happen in real mode as it may crash the kernel in
a horrible way.

CONFIG_SPARSEMEM_VMEMMAP and CONFIG_FLATMEM are supported.

Cc: linux-mm@kvack.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pgtable-ppc64.h |  2 ++
 arch/powerpc/mm/init_64.c                | 51 +++++++++++++++++++++++++++++++-
 include/linux/mm.h                       | 14 +++++++++
 include/linux/page-flags.h               |  4 ++-
 4 files changed, 69 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index 46db09414a10..4a191c472867 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -394,6 +394,8 @@ static inline void mark_hpte_slot_valid(unsigned char *hpte_slot_array,
 	hpte_slot_array[index] = hidx << 4 | 0x1 << 3;
 }
 
+struct page *realmode_pfn_to_page(unsigned long pfn);
+
 static inline char *get_hpte_slot_array(pmd_t *pmdp)
 {
 	/*
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 8ed035d2edb5..e3734edffa69 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -304,5 +304,54 @@ void register_page_bootmem_memmap(unsigned long section_nr,
 				  struct page *start_page, unsigned long size)
 {
 }
-#endif /* CONFIG_SPARSEMEM_VMEMMAP */
 
+/*
+ * We do not have access to the sparsemem vmemmap, so we fallback to
+ * walking the list of sparsemem blocks which we already maintain for
+ * the sake of crashdump. In the long run, we might want to maintain
+ * a tree if performance of that linear walk becomes a problem.
+ *
+ * realmode_pfn_to_page functions can fail due to:
+ * 1) As real sparsemem blocks do not lay in RAM continously (they
+ * are in virtual address space which is not available in the real mode),
+ * the requested page struct can be split between blocks so get_page/put_page
+ * may fail.
+ * 2) When huge pages are used, the get_page/put_page API will fail
+ * in real mode as the linked addresses in the page struct are virtual
+ * too.
+ */
+struct page *realmode_pfn_to_page(unsigned long pfn)
+{
+	struct vmemmap_backing *vmem_back;
+	struct page *page;
+	unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift;
+	unsigned long pg_va = (unsigned long) pfn_to_page(pfn);
+
+	for (vmem_back = vmemmap_list; vmem_back; vmem_back = vmem_back->list) {
+		if (pg_va < vmem_back->virt_addr)
+			continue;
+
+		/* Check that page struct is not split between real pages */
+		if ((pg_va + sizeof(struct page)) >
+				(vmem_back->virt_addr + page_size))
+			return NULL;
+
+		page = (struct page *) (vmem_back->phys + pg_va -
+				vmem_back->virt_addr);
+		return page;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(realmode_pfn_to_page);
+
+#elif defined(CONFIG_FLATMEM)
+
+struct page *realmode_pfn_to_page(unsigned long pfn)
+{
+	struct page *page = pfn_to_page(pfn);
+	return page;
+}
+EXPORT_SYMBOL_GPL(realmode_pfn_to_page);
+
+#endif /* CONFIG_SPARSEMEM_VMEMMAP/CONFIG_FLATMEM */
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 8b6e55ee8855..1a0668e5a4ee 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -297,12 +297,26 @@ static inline int put_page_testzero(struct page *page)
 /*
  * Try to grab a ref unless the page has a refcount of zero, return false if
  * that is the case.
+ * This can be called when MMU is off so it must not access
+ * any of the virtual mappings.
  */
 static inline int get_page_unless_zero(struct page *page)
 {
 	return atomic_inc_not_zero(&page->_count);
 }
 
+/*
+ * Try to drop a ref unless the page has a refcount of one, return false if
+ * that is the case.
+ * This is to make sure that the refcount won't become zero after this drop.
+ * This can be called when MMU is off so it must not access
+ * any of the virtual mappings.
+ */
+static inline int put_page_unless_one(struct page *page)
+{
+	return atomic_add_unless(&page->_count, -1, 1);
+}
+
 extern int page_is_ram(unsigned long pfn);
 
 /* Support for virtually mapped pages */
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index 6d53675c2b54..98ada58f9942 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -329,7 +329,9 @@ static inline void set_page_writeback(struct page *page)
  * System with lots of page flags available. This allows separate
  * flags for PageHead() and PageTail() checks of compound pages so that bit
  * tests can be used in performance sensitive paths. PageCompound is
- * generally not used in hot code paths.
+ * generally not used in hot code paths except arch/powerpc/mm/init_64.c
+ * and arch/powerpc/kvm/book3s_64_vio_hv.c which use it to detect huge pages
+ * and avoid handling those in real mode.
  */
 __PAGEFLAG(Head, head) CLEARPAGEFLAG(Head, head)
 __PAGEFLAG(Tail, tail)
-- 
cgit v1.2.3


From 8e0a1611cb891e72a9affc4a8ee4795c634896a6 Mon Sep 17 00:00:00 2001
From: Alexey Kardashevskiy
Date: Wed, 28 Aug 2013 18:37:43 +1000
Subject: powerpc: add real mode support for dma operations on powernv

The existing TCE machine calls (tce_build and tce_free) only support
virtual mode as they call __raw_writeq for TCE invalidation what
fails in real mode.

This introduces tce_build_rm and tce_free_rm real mode versions
which do mostly the same but use "Store Doubleword Caching Inhibited
Indexed" instruction for TCE invalidation.

This new feature is going to be utilized by real mode support of VFIO.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/machdep.h        | 12 ++++++++
 arch/powerpc/platforms/powernv/pci-ioda.c | 49 +++++++++++++++++++++++--------
 arch/powerpc/platforms/powernv/pci.c      | 42 ++++++++++++++++++++++----
 arch/powerpc/platforms/powernv/pci.h      |  3 +-
 4 files changed, 87 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 8b480901165a..07dd3b1312e5 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -78,6 +78,18 @@ struct machdep_calls {
 				    long index);
 	void		(*tce_flush)(struct iommu_table *tbl);
 
+	/* _rm versions are for real mode use only */
+	int		(*tce_build_rm)(struct iommu_table *tbl,
+				     long index,
+				     long npages,
+				     unsigned long uaddr,
+				     enum dma_data_direction direction,
+				     struct dma_attrs *attrs);
+	void		(*tce_free_rm)(struct iommu_table *tbl,
+				    long index,
+				    long npages);
+	void		(*tce_flush_rm)(struct iommu_table *tbl);
+
 	void __iomem *	(*ioremap)(phys_addr_t addr, unsigned long size,
 				   unsigned long flags, void *caller);
 	void		(*iounmap)(volatile void __iomem *token);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 74a5a5773b1f..307015d9cd99 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -70,6 +70,16 @@ define_pe_printk_level(pe_err, KERN_ERR);
 define_pe_printk_level(pe_warn, KERN_WARNING);
 define_pe_printk_level(pe_info, KERN_INFO);
 
+/*
+ * stdcix is only supposed to be used in hypervisor real mode as per
+ * the architecture spec
+ */
+static inline void __raw_rm_writeq(u64 val, volatile void __iomem *paddr)
+{
+	__asm__ __volatile__("stdcix %0,0,%1"
+		: : "r" (val), "r" (paddr) : "memory");
+}
+
 static int pnv_ioda_alloc_pe(struct pnv_phb *phb)
 {
 	unsigned long pe;
@@ -454,10 +464,13 @@ static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus)
 	}
 }
 
-static void pnv_pci_ioda1_tce_invalidate(struct iommu_table *tbl,
-					 u64 *startp, u64 *endp)
+static void pnv_pci_ioda1_tce_invalidate(struct pnv_ioda_pe *pe,
+					 struct iommu_table *tbl,
+					 u64 *startp, u64 *endp, bool rm)
 {
-	u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
+	u64 __iomem *invalidate = rm ?
+		(u64 __iomem *)pe->tce_inval_reg_phys :
+		(u64 __iomem *)tbl->it_index;
 	unsigned long start, end, inc;
 
 	start = __pa(startp);
@@ -484,7 +497,10 @@ static void pnv_pci_ioda1_tce_invalidate(struct iommu_table *tbl,
 
         mb(); /* Ensure above stores are visible */
         while (start <= end) {
-                __raw_writeq(start, invalidate);
+		if (rm)
+			__raw_rm_writeq(start, invalidate);
+		else
+			__raw_writeq(start, invalidate);
                 start += inc;
         }
 
@@ -496,10 +512,12 @@ static void pnv_pci_ioda1_tce_invalidate(struct iommu_table *tbl,
 
 static void pnv_pci_ioda2_tce_invalidate(struct pnv_ioda_pe *pe,
 					 struct iommu_table *tbl,
-					 u64 *startp, u64 *endp)
+					 u64 *startp, u64 *endp, bool rm)
 {
 	unsigned long start, end, inc;
-	u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
+	u64 __iomem *invalidate = rm ?
+		(u64 __iomem *)pe->tce_inval_reg_phys :
+		(u64 __iomem *)tbl->it_index;
 
 	/* We'll invalidate DMA address in PE scope */
 	start = 0x2ul << 60;
@@ -515,22 +533,25 @@ static void pnv_pci_ioda2_tce_invalidate(struct pnv_ioda_pe *pe,
 	mb();
 
 	while (start <= end) {
-		__raw_writeq(start, invalidate);
+		if (rm)
+			__raw_rm_writeq(start, invalidate);
+		else
+			__raw_writeq(start, invalidate);
 		start += inc;
 	}
 }
 
 void pnv_pci_ioda_tce_invalidate(struct iommu_table *tbl,
-				 u64 *startp, u64 *endp)
+				 u64 *startp, u64 *endp, bool rm)
 {
 	struct pnv_ioda_pe *pe = container_of(tbl, struct pnv_ioda_pe,
 					      tce32_table);
 	struct pnv_phb *phb = pe->phb;
 
 	if (phb->type == PNV_PHB_IODA1)
-		pnv_pci_ioda1_tce_invalidate(tbl, startp, endp);
+		pnv_pci_ioda1_tce_invalidate(pe, tbl, startp, endp, rm);
 	else
-		pnv_pci_ioda2_tce_invalidate(pe, tbl, startp, endp);
+		pnv_pci_ioda2_tce_invalidate(pe, tbl, startp, endp, rm);
 }
 
 static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
@@ -603,7 +624,9 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
 		 * bus number, print that out instead.
 		 */
 		tbl->it_busno = 0;
-		tbl->it_index = (unsigned long)ioremap(be64_to_cpup(swinvp), 8);
+		pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
+		tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys,
+				8);
 		tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE |
 			       TCE_PCI_SWINV_PAIR;
 	}
@@ -681,7 +704,9 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
 		 * bus number, print that out instead.
 		 */
 		tbl->it_busno = 0;
-		tbl->it_index = (unsigned long)ioremap(be64_to_cpup(swinvp), 8);
+		pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
+		tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys,
+				8);
 		tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
 	}
 	iommu_init_table(tbl, phb->hose->node);
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index a28d3b5e6393..420abe3baab9 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -401,7 +401,7 @@ struct pci_ops pnv_pci_ops = {
 
 static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
 			 unsigned long uaddr, enum dma_data_direction direction,
-			 struct dma_attrs *attrs)
+			 struct dma_attrs *attrs, bool rm)
 {
 	u64 proto_tce;
 	u64 *tcep, *tces;
@@ -423,12 +423,22 @@ static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
 	 * of flags if that becomes the case
 	 */
 	if (tbl->it_type & TCE_PCI_SWINV_CREATE)
-		pnv_pci_ioda_tce_invalidate(tbl, tces, tcep - 1);
+		pnv_pci_ioda_tce_invalidate(tbl, tces, tcep - 1, rm);
 
 	return 0;
 }
 
-static void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
+static int pnv_tce_build_vm(struct iommu_table *tbl, long index, long npages,
+			    unsigned long uaddr,
+			    enum dma_data_direction direction,
+			    struct dma_attrs *attrs)
+{
+	return pnv_tce_build(tbl, index, npages, uaddr, direction, attrs,
+			false);
+}
+
+static void pnv_tce_free(struct iommu_table *tbl, long index, long npages,
+		bool rm)
 {
 	u64 *tcep, *tces;
 
@@ -438,7 +448,12 @@ static void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
 		*(tcep++) = 0;
 
 	if (tbl->it_type & TCE_PCI_SWINV_FREE)
-		pnv_pci_ioda_tce_invalidate(tbl, tces, tcep - 1);
+		pnv_pci_ioda_tce_invalidate(tbl, tces, tcep - 1, rm);
+}
+
+static void pnv_tce_free_vm(struct iommu_table *tbl, long index, long npages)
+{
+	pnv_tce_free(tbl, index, npages, false);
 }
 
 static unsigned long pnv_tce_get(struct iommu_table *tbl, long index)
@@ -446,6 +461,19 @@ static unsigned long pnv_tce_get(struct iommu_table *tbl, long index)
 	return ((u64 *)tbl->it_base)[index - tbl->it_offset];
 }
 
+static int pnv_tce_build_rm(struct iommu_table *tbl, long index, long npages,
+			    unsigned long uaddr,
+			    enum dma_data_direction direction,
+			    struct dma_attrs *attrs)
+{
+	return pnv_tce_build(tbl, index, npages, uaddr, direction, attrs, true);
+}
+
+static void pnv_tce_free_rm(struct iommu_table *tbl, long index, long npages)
+{
+	pnv_tce_free(tbl, index, npages, true);
+}
+
 void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
 			       void *tce_mem, u64 tce_size,
 			       u64 dma_offset)
@@ -610,8 +638,10 @@ void __init pnv_pci_init(void)
 
 	/* Configure IOMMU DMA hooks */
 	ppc_md.pci_dma_dev_setup = pnv_pci_dma_dev_setup;
-	ppc_md.tce_build = pnv_tce_build;
-	ppc_md.tce_free = pnv_tce_free;
+	ppc_md.tce_build = pnv_tce_build_vm;
+	ppc_md.tce_free = pnv_tce_free_vm;
+	ppc_md.tce_build_rm = pnv_tce_build_rm;
+	ppc_md.tce_free_rm = pnv_tce_free_rm;
 	ppc_md.tce_get = pnv_tce_get;
 	ppc_md.pci_probe_mode = pnv_pci_probe_mode;
 	set_pci_dma_ops(&dma_iommu_ops);
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index d633c64e05a1..170dd98629d7 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -52,6 +52,7 @@ struct pnv_ioda_pe {
 	int			tce32_seg;
 	int			tce32_segcount;
 	struct iommu_table	tce32_table;
+	phys_addr_t		tce_inval_reg_phys;
 
 	/* XXX TODO: Add support for additional 64-bit iommus */
 
@@ -193,6 +194,6 @@ extern void pnv_pci_init_p5ioc2_hub(struct device_node *np);
 extern void pnv_pci_init_ioda_hub(struct device_node *np);
 extern void pnv_pci_init_ioda2_phb(struct device_node *np);
 extern void pnv_pci_ioda_tce_invalidate(struct iommu_table *tbl,
-					u64 *startp, u64 *endp);
+					u64 *startp, u64 *endp, bool rm);
 
 #endif /* __POWERNV_PCI_H */
-- 
cgit v1.2.3


From de79f7b9f6f92ec1bd6f61fa1f20de60728a5b5e Mon Sep 17 00:00:00 2001
From: Paul Mackerras
Date: Tue, 10 Sep 2013 20:20:42 +1000
Subject: powerpc: Put FP/VSX and VR state into structures

This creates new 'thread_fp_state' and 'thread_vr_state' structures
to store FP/VSX state (including FPSCR) and Altivec/VSX state
(including VSCR), and uses them in the thread_struct.  In the
thread_fp_state, the FPRs and VSRs are represented as u64 rather
than double, since we rarely perform floating-point computations
on the values, and this will enable the structures to be used
in KVM code as well.  Similarly FPSCR is now a u64 rather than
a structure of two 32-bit values.

This takes the offsets out of the macros such as SAVE_32FPRS,
REST_32FPRS, etc.  This enables the same macros to be used for normal
and transactional state, enabling us to delete the transactional
versions of the macros.   This also removes the unused do_load_up_fpu
and do_load_up_altivec, which were in fact buggy since they didn't
create large enough stack frames to account for the fact that
load_up_fpu and load_up_altivec are not designed to be called from C
and assume that their caller's stack frame is an interrupt frame.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/ppc_asm.h     | 95 +++-------------------------------
 arch/powerpc/include/asm/processor.h   | 40 +++++++-------
 arch/powerpc/include/asm/sfp-machine.h |  2 +-
 arch/powerpc/kernel/align.c            |  6 +--
 arch/powerpc/kernel/asm-offsets.c      | 25 +++------
 arch/powerpc/kernel/fpu.S              | 59 +++++----------------
 arch/powerpc/kernel/process.c          |  8 ++-
 arch/powerpc/kernel/ptrace.c           | 49 +++++++++---------
 arch/powerpc/kernel/ptrace32.c         | 11 ++--
 arch/powerpc/kernel/signal_32.c        | 72 +++++++++++++-------------
 arch/powerpc/kernel/signal_64.c        | 29 ++++++-----
 arch/powerpc/kernel/tm.S               | 41 ++++++++-------
 arch/powerpc/kernel/traps.c            | 10 ++--
 arch/powerpc/kernel/vecemu.c           |  6 +--
 arch/powerpc/kernel/vector.S           | 50 ++++++------------
 arch/powerpc/kvm/book3s_pr.c           | 36 ++++++-------
 arch/powerpc/kvm/booke.c               | 19 ++++---
 17 files changed, 200 insertions(+), 358 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 599545738af3..140f67090f0b 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -98,123 +98,40 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
 #define REST_8GPRS(n, base)	REST_4GPRS(n, base); REST_4GPRS(n+4, base)
 #define REST_10GPRS(n, base)	REST_8GPRS(n, base); REST_2GPRS(n+8, base)
 
-#define SAVE_FPR(n, base)	stfd	n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base)
+#define SAVE_FPR(n, base)	stfd	n,8*TS_FPRWIDTH*(n)(base)
 #define SAVE_2FPRS(n, base)	SAVE_FPR(n, base); SAVE_FPR(n+1, base)
 #define SAVE_4FPRS(n, base)	SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base)
 #define SAVE_8FPRS(n, base)	SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base)
 #define SAVE_16FPRS(n, base)	SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base)
 #define SAVE_32FPRS(n, base)	SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base)
-#define REST_FPR(n, base)	lfd	n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base)
+#define REST_FPR(n, base)	lfd	n,8*TS_FPRWIDTH*(n)(base)
 #define REST_2FPRS(n, base)	REST_FPR(n, base); REST_FPR(n+1, base)
 #define REST_4FPRS(n, base)	REST_2FPRS(n, base); REST_2FPRS(n+2, base)
 #define REST_8FPRS(n, base)	REST_4FPRS(n, base); REST_4FPRS(n+4, base)
 #define REST_16FPRS(n, base)	REST_8FPRS(n, base); REST_8FPRS(n+8, base)
 #define REST_32FPRS(n, base)	REST_16FPRS(n, base); REST_16FPRS(n+16, base)
 
-#define SAVE_VR(n,b,base)	li b,THREAD_VR0+(16*(n));  stvx n,base,b
+#define SAVE_VR(n,b,base)	li b,16*(n);  stvx n,base,b
 #define SAVE_2VRS(n,b,base)	SAVE_VR(n,b,base); SAVE_VR(n+1,b,base)
 #define SAVE_4VRS(n,b,base)	SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base)
 #define SAVE_8VRS(n,b,base)	SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base)
 #define SAVE_16VRS(n,b,base)	SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base)
 #define SAVE_32VRS(n,b,base)	SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base)
-#define REST_VR(n,b,base)	li b,THREAD_VR0+(16*(n)); lvx n,base,b
+#define REST_VR(n,b,base)	li b,16*(n); lvx n,base,b
 #define REST_2VRS(n,b,base)	REST_VR(n,b,base); REST_VR(n+1,b,base)
 #define REST_4VRS(n,b,base)	REST_2VRS(n,b,base); REST_2VRS(n+2,b,base)
 #define REST_8VRS(n,b,base)	REST_4VRS(n,b,base); REST_4VRS(n+4,b,base)
 #define REST_16VRS(n,b,base)	REST_8VRS(n,b,base); REST_8VRS(n+8,b,base)
 #define REST_32VRS(n,b,base)	REST_16VRS(n,b,base); REST_16VRS(n+16,b,base)
 
-/* Save/restore FPRs, VRs and VSRs from their checkpointed backups in
- * thread_struct:
- */
-#define SAVE_FPR_TRANSACT(n, base)	stfd n,THREAD_TRANSACT_FPR0+	\
-					8*TS_FPRWIDTH*(n)(base)
-#define SAVE_2FPRS_TRANSACT(n, base)	SAVE_FPR_TRANSACT(n, base);	\
-					SAVE_FPR_TRANSACT(n+1, base)
-#define SAVE_4FPRS_TRANSACT(n, base)	SAVE_2FPRS_TRANSACT(n, base);	\
-					SAVE_2FPRS_TRANSACT(n+2, base)
-#define SAVE_8FPRS_TRANSACT(n, base)	SAVE_4FPRS_TRANSACT(n, base);	\
-					SAVE_4FPRS_TRANSACT(n+4, base)
-#define SAVE_16FPRS_TRANSACT(n, base)	SAVE_8FPRS_TRANSACT(n, base);	\
-					SAVE_8FPRS_TRANSACT(n+8, base)
-#define SAVE_32FPRS_TRANSACT(n, base)	SAVE_16FPRS_TRANSACT(n, base);	\
-					SAVE_16FPRS_TRANSACT(n+16, base)
-
-#define REST_FPR_TRANSACT(n, base)	lfd	n,THREAD_TRANSACT_FPR0+	\
-					8*TS_FPRWIDTH*(n)(base)
-#define REST_2FPRS_TRANSACT(n, base)	REST_FPR_TRANSACT(n, base);	\
-					REST_FPR_TRANSACT(n+1, base)
-#define REST_4FPRS_TRANSACT(n, base)	REST_2FPRS_TRANSACT(n, base);	\
-					REST_2FPRS_TRANSACT(n+2, base)
-#define REST_8FPRS_TRANSACT(n, base)	REST_4FPRS_TRANSACT(n, base);	\
-					REST_4FPRS_TRANSACT(n+4, base)
-#define REST_16FPRS_TRANSACT(n, base)	REST_8FPRS_TRANSACT(n, base);	\
-					REST_8FPRS_TRANSACT(n+8, base)
-#define REST_32FPRS_TRANSACT(n, base)	REST_16FPRS_TRANSACT(n, base);	\
-					REST_16FPRS_TRANSACT(n+16, base)
-
-
-#define SAVE_VR_TRANSACT(n,b,base)	li b,THREAD_TRANSACT_VR0+(16*(n)); \
-					stvx n,b,base
-#define SAVE_2VRS_TRANSACT(n,b,base)	SAVE_VR_TRANSACT(n,b,base);	\
-					SAVE_VR_TRANSACT(n+1,b,base)
-#define SAVE_4VRS_TRANSACT(n,b,base)	SAVE_2VRS_TRANSACT(n,b,base);	\
-					SAVE_2VRS_TRANSACT(n+2,b,base)
-#define SAVE_8VRS_TRANSACT(n,b,base)	SAVE_4VRS_TRANSACT(n,b,base);	\
-					SAVE_4VRS_TRANSACT(n+4,b,base)
-#define SAVE_16VRS_TRANSACT(n,b,base)	SAVE_8VRS_TRANSACT(n,b,base);	\
-					SAVE_8VRS_TRANSACT(n+8,b,base)
-#define SAVE_32VRS_TRANSACT(n,b,base)	SAVE_16VRS_TRANSACT(n,b,base);	\
-					SAVE_16VRS_TRANSACT(n+16,b,base)
-
-#define REST_VR_TRANSACT(n,b,base)	li b,THREAD_TRANSACT_VR0+(16*(n)); \
-					lvx n,b,base
-#define REST_2VRS_TRANSACT(n,b,base)	REST_VR_TRANSACT(n,b,base);	\
-					REST_VR_TRANSACT(n+1,b,base)
-#define REST_4VRS_TRANSACT(n,b,base)	REST_2VRS_TRANSACT(n,b,base);	\
-					REST_2VRS_TRANSACT(n+2,b,base)
-#define REST_8VRS_TRANSACT(n,b,base)	REST_4VRS_TRANSACT(n,b,base);	\
-					REST_4VRS_TRANSACT(n+4,b,base)
-#define REST_16VRS_TRANSACT(n,b,base)	REST_8VRS_TRANSACT(n,b,base);	\
-					REST_8VRS_TRANSACT(n+8,b,base)
-#define REST_32VRS_TRANSACT(n,b,base)	REST_16VRS_TRANSACT(n,b,base);	\
-					REST_16VRS_TRANSACT(n+16,b,base)
-
-
-#define SAVE_VSR_TRANSACT(n,b,base)	li b,THREAD_TRANSACT_VSR0+(16*(n)); \
-					STXVD2X(n,R##base,R##b)
-#define SAVE_2VSRS_TRANSACT(n,b,base)	SAVE_VSR_TRANSACT(n,b,base);	\
-	                                SAVE_VSR_TRANSACT(n+1,b,base)
-#define SAVE_4VSRS_TRANSACT(n,b,base)	SAVE_2VSRS_TRANSACT(n,b,base);	\
-	                                SAVE_2VSRS_TRANSACT(n+2,b,base)
-#define SAVE_8VSRS_TRANSACT(n,b,base)	SAVE_4VSRS_TRANSACT(n,b,base);	\
-	                                SAVE_4VSRS_TRANSACT(n+4,b,base)
-#define SAVE_16VSRS_TRANSACT(n,b,base)	SAVE_8VSRS_TRANSACT(n,b,base);	\
-	                                SAVE_8VSRS_TRANSACT(n+8,b,base)
-#define SAVE_32VSRS_TRANSACT(n,b,base)	SAVE_16VSRS_TRANSACT(n,b,base);	\
-	                                SAVE_16VSRS_TRANSACT(n+16,b,base)
-
-#define REST_VSR_TRANSACT(n,b,base)	li b,THREAD_TRANSACT_VSR0+(16*(n)); \
-					LXVD2X(n,R##base,R##b)
-#define REST_2VSRS_TRANSACT(n,b,base)	REST_VSR_TRANSACT(n,b,base);    \
-	                                REST_VSR_TRANSACT(n+1,b,base)
-#define REST_4VSRS_TRANSACT(n,b,base)	REST_2VSRS_TRANSACT(n,b,base);	\
-	                                REST_2VSRS_TRANSACT(n+2,b,base)
-#define REST_8VSRS_TRANSACT(n,b,base)	REST_4VSRS_TRANSACT(n,b,base);	\
-	                                REST_4VSRS_TRANSACT(n+4,b,base)
-#define REST_16VSRS_TRANSACT(n,b,base)	REST_8VSRS_TRANSACT(n,b,base);	\
-	                                REST_8VSRS_TRANSACT(n+8,b,base)
-#define REST_32VSRS_TRANSACT(n,b,base)	REST_16VSRS_TRANSACT(n,b,base);	\
-	                                REST_16VSRS_TRANSACT(n+16,b,base)
-
 /* Save the lower 32 VSRs in the thread VSR region */
-#define SAVE_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n));  STXVD2X(n,R##base,R##b)
+#define SAVE_VSR(n,b,base)	li b,16*(n);  STXVD2X(n,R##base,R##b)
 #define SAVE_2VSRS(n,b,base)	SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base)
 #define SAVE_4VSRS(n,b,base)	SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base)
 #define SAVE_8VSRS(n,b,base)	SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base)
 #define SAVE_16VSRS(n,b,base)	SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base)
 #define SAVE_32VSRS(n,b,base)	SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base)
-#define REST_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n)); LXVD2X(n,R##base,R##b)
+#define REST_VSR(n,b,base)	li b,16*(n); LXVD2X(n,R##base,R##b)
 #define REST_2VSRS(n,b,base)	REST_VSR(n,b,base); REST_VSR(n+1,b,base)
 #define REST_4VSRS(n,b,base)	REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base)
 #define REST_8VSRS(n,b,base)	REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index ce4de5aed7b5..afe695e9feb8 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -144,8 +144,20 @@ typedef struct {
 
 #define TS_FPROFFSET 0
 #define TS_VSRLOWOFFSET 1
-#define TS_FPR(i) fpr[i][TS_FPROFFSET]
-#define TS_TRANS_FPR(i) transact_fpr[i][TS_FPROFFSET]
+#define TS_FPR(i) fp_state.fpr[i][TS_FPROFFSET]
+#define TS_TRANS_FPR(i) transact_fp.fpr[i][TS_FPROFFSET]
+
+/* FP and VSX 0-31 register set */
+struct thread_fp_state {
+	u64	fpr[32][TS_FPRWIDTH] __attribute__((aligned(16)));
+	u64	fpscr;		/* Floating point status */
+};
+
+/* Complete AltiVec register set including VSCR */
+struct thread_vr_state {
+	vector128	vr[32] __attribute__((aligned(16)));
+	vector128	vscr __attribute__((aligned(16)));
+};
 
 struct thread_struct {
 	unsigned long	ksp;		/* Kernel stack pointer */
@@ -198,13 +210,7 @@ struct thread_struct {
 	unsigned long	dvc2;
 #endif
 #endif
-	/* FP and VSX 0-31 register set */
-	double		fpr[32][TS_FPRWIDTH] __attribute__((aligned(16)));
-	struct {
-
-		unsigned int pad;
-		unsigned int val;	/* Floating point status */
-	} fpscr;
+	struct thread_fp_state	fp_state;
 	int		fpexc_mode;	/* floating-point exception mode */
 	unsigned int	align_ctl;	/* alignment handling control */
 #ifdef CONFIG_PPC64
@@ -222,10 +228,7 @@ struct thread_struct {
 	struct arch_hw_breakpoint hw_brk; /* info on the hardware breakpoint */
 	unsigned long	trap_nr;	/* last trap # on this thread */
 #ifdef CONFIG_ALTIVEC
-	/* Complete AltiVec register set */
-	vector128	vr[32] __attribute__((aligned(16)));
-	/* AltiVec status */
-	vector128	vscr __attribute__((aligned(16)));
+	struct thread_vr_state vr_state;
 	unsigned long	vrsave;
 	int		used_vr;	/* set if process has used altivec */
 #endif /* CONFIG_ALTIVEC */
@@ -262,13 +265,8 @@ struct thread_struct {
 	 * transact_fpr[] is the new set of transactional values.
 	 * VRs work the same way.
 	 */
-	double		transact_fpr[32][TS_FPRWIDTH];
-	struct {
-		unsigned int pad;
-		unsigned int val;	/* Floating point status */
-	} transact_fpscr;
-	vector128	transact_vr[32] __attribute__((aligned(16)));
-	vector128	transact_vscr __attribute__((aligned(16)));
+	struct thread_fp_state transact_fp;
+	struct thread_vr_state transact_vr;
 	unsigned long	transact_vrsave;
 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
 #ifdef CONFIG_KVM_BOOK3S_32_HANDLER
@@ -322,8 +320,6 @@ struct thread_struct {
 	.ksp = INIT_SP, \
 	.regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \
 	.fs = KERNEL_DS, \
-	.fpr = {{0}}, \
-	.fpscr = { .val = 0, }, \
 	.fpexc_mode = 0, \
 	.ppr = INIT_PPR, \
 }
diff --git a/arch/powerpc/include/asm/sfp-machine.h b/arch/powerpc/include/asm/sfp-machine.h
index 3a7a67a0d006..d89beaba26ff 100644
--- a/arch/powerpc/include/asm/sfp-machine.h
+++ b/arch/powerpc/include/asm/sfp-machine.h
@@ -125,7 +125,7 @@
 #define FP_EX_DIVZERO         (1 << (31 - 5))
 #define FP_EX_INEXACT         (1 << (31 - 6))
 
-#define __FPU_FPSCR	(current->thread.fpscr.val)
+#define __FPU_FPSCR	(current->thread.fp_state.fpscr)
 
 /* We only actually write to the destination register
  * if exceptions signalled (if any) will not trap.
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index a27ccd5dc6b9..eaa16bc17e9d 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -660,7 +660,7 @@ static int emulate_vsx(unsigned char __user *addr, unsigned int reg,
 	if (reg < 32)
 		ptr = (char *) &current->thread.TS_FPR(reg);
 	else
-		ptr = (char *) &current->thread.vr[reg - 32];
+		ptr = (char *) &current->thread.vr_state.vr[reg - 32];
 
 	lptr = (unsigned long *) ptr;
 
@@ -897,7 +897,7 @@ int fix_alignment(struct pt_regs *regs)
 				return -EFAULT;
 		}
 	} else if (flags & F) {
-		data.dd = current->thread.TS_FPR(reg);
+		data.ll = current->thread.TS_FPR(reg);
 		if (flags & S) {
 			/* Single-precision FP store requires conversion... */
 #ifdef CONFIG_PPC_FPU
@@ -975,7 +975,7 @@ int fix_alignment(struct pt_regs *regs)
 		if (unlikely(ret))
 			return -EFAULT;
 	} else if (flags & F)
-		current->thread.TS_FPR(reg) = data.dd;
+		current->thread.TS_FPR(reg) = data.ll;
 	else
 		regs->gpr[reg] = data.ll;
 
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 502c7a4e73f7..8d27b61c95b9 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -90,16 +90,15 @@ int main(void)
 	DEFINE(THREAD_NORMSAVES, offsetof(struct thread_struct, normsave[0]));
 #endif
 	DEFINE(THREAD_FPEXC_MODE, offsetof(struct thread_struct, fpexc_mode));
-	DEFINE(THREAD_FPR0, offsetof(struct thread_struct, fpr[0]));
-	DEFINE(THREAD_FPSCR, offsetof(struct thread_struct, fpscr));
+	DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fp_state));
+	DEFINE(FPSTATE_FPSCR, offsetof(struct thread_fp_state, fpscr));
 #ifdef CONFIG_ALTIVEC
-	DEFINE(THREAD_VR0, offsetof(struct thread_struct, vr[0]));
+	DEFINE(THREAD_VRSTATE, offsetof(struct thread_struct, vr_state));
 	DEFINE(THREAD_VRSAVE, offsetof(struct thread_struct, vrsave));
-	DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr));
 	DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr));
+	DEFINE(VRSTATE_VSCR, offsetof(struct thread_vr_state, vscr));
 #endif /* CONFIG_ALTIVEC */
 #ifdef CONFIG_VSX
-	DEFINE(THREAD_VSR0, offsetof(struct thread_struct, fpr));
 	DEFINE(THREAD_USED_VSR, offsetof(struct thread_struct, used_vsr));
 #endif /* CONFIG_VSX */
 #ifdef CONFIG_PPC64
@@ -143,20 +142,12 @@ int main(void)
 	DEFINE(THREAD_TM_PPR, offsetof(struct thread_struct, tm_ppr));
 	DEFINE(THREAD_TM_DSCR, offsetof(struct thread_struct, tm_dscr));
 	DEFINE(PT_CKPT_REGS, offsetof(struct thread_struct, ckpt_regs));
-	DEFINE(THREAD_TRANSACT_VR0, offsetof(struct thread_struct,
-					 transact_vr[0]));
-	DEFINE(THREAD_TRANSACT_VSCR, offsetof(struct thread_struct,
-					  transact_vscr));
+	DEFINE(THREAD_TRANSACT_VRSTATE, offsetof(struct thread_struct,
+						 transact_vr));
 	DEFINE(THREAD_TRANSACT_VRSAVE, offsetof(struct thread_struct,
 					    transact_vrsave));
-	DEFINE(THREAD_TRANSACT_FPR0, offsetof(struct thread_struct,
-					  transact_fpr[0]));
-	DEFINE(THREAD_TRANSACT_FPSCR, offsetof(struct thread_struct,
-					   transact_fpscr));
-#ifdef CONFIG_VSX
-	DEFINE(THREAD_TRANSACT_VSR0, offsetof(struct thread_struct,
-					  transact_fpr[0]));
-#endif
+	DEFINE(THREAD_TRANSACT_FPSTATE, offsetof(struct thread_struct,
+						 transact_fp));
 	/* Local pt_regs on stack for Transactional Memory funcs. */
 	DEFINE(TM_FRAME_SIZE, STACK_FRAME_OVERHEAD +
 	       sizeof(struct pt_regs) + 16);
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index caeaabf11a2f..34b96e6d2f0d 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -35,15 +35,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX);					\
 2:	REST_32VSRS(n,c,base);						\
 3:
 
-#define __REST_32FPVSRS_TRANSACT(n,c,base)				\
-BEGIN_FTR_SECTION							\
-	b	2f;							\
-END_FTR_SECTION_IFSET(CPU_FTR_VSX);					\
-	REST_32FPRS_TRANSACT(n,base);					\
-	b	3f;							\
-2:	REST_32VSRS_TRANSACT(n,c,base);					\
-3:
-
 #define __SAVE_32FPVSRS(n,c,base)					\
 BEGIN_FTR_SECTION							\
 	b	2f;							\
@@ -54,40 +45,12 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX);					\
 3:
 #else
 #define __REST_32FPVSRS(n,b,base)	REST_32FPRS(n, base)
-#define __REST_32FPVSRS_TRANSACT(n,b,base)	REST_32FPRS(n, base)
 #define __SAVE_32FPVSRS(n,b,base)	SAVE_32FPRS(n, base)
 #endif
 #define REST_32FPVSRS(n,c,base) __REST_32FPVSRS(n,__REG_##c,__REG_##base)
-#define REST_32FPVSRS_TRANSACT(n,c,base) \
-	__REST_32FPVSRS_TRANSACT(n,__REG_##c,__REG_##base)
 #define SAVE_32FPVSRS(n,c,base) __SAVE_32FPVSRS(n,__REG_##c,__REG_##base)
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-/*
- * Wrapper to call load_up_fpu from C.
- * void do_load_up_fpu(struct pt_regs *regs);
- */
-_GLOBAL(do_load_up_fpu)
-	mflr	r0
-	std	r0, 16(r1)
-	stdu	r1, -112(r1)
-
-	subi	r6, r3, STACK_FRAME_OVERHEAD
-	/* load_up_fpu expects r12=MSR, r13=PACA, and returns
-	 * with r12 = new MSR.
-	 */
-	ld	r12,_MSR(r6)
-	GET_PACA(r13)
-
-	bl	load_up_fpu
-	std	r12,_MSR(r6)
-
-	ld	r0, 112+16(r1)
-	addi	r1, r1, 112
-	mtlr	r0
-	blr
-
-
 /* void do_load_up_transact_fpu(struct thread_struct *thread)
  *
  * This is similar to load_up_fpu but for the transactional version of the FP
@@ -105,9 +68,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	SYNC
 	MTMSRD(r5)
 
-	lfd	fr0,THREAD_TRANSACT_FPSCR(r3)
+	addi	r7,r3,THREAD_TRANSACT_FPSTATE
+	lfd	fr0,FPSTATE_FPSCR(r7)
 	MTFSF_L(fr0)
-	REST_32FPVSRS_TRANSACT(0, R4, R3)
+	REST_32FPVSRS(0, R4, R7)
 
 	/* FP/VSX off again */
 	MTMSRD(r6)
@@ -147,9 +111,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	beq	1f
 	toreal(r4)
 	addi	r4,r4,THREAD		/* want last_task_used_math->thread */
-	SAVE_32FPVSRS(0, R5, R4)
+	addi	r8,r4,THREAD_FPSTATE
+	SAVE_32FPVSRS(0, R5, R8)
 	mffs	fr0
-	stfd	fr0,THREAD_FPSCR(r4)
+	stfd	fr0,FPSTATE_FPSCR(r8)
 	PPC_LL	r5,PT_REGS(r4)
 	toreal(r5)
 	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
@@ -160,7 +125,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 #endif /* CONFIG_SMP */
 	/* enable use of FP after return */
 #ifdef CONFIG_PPC32
-	mfspr	r5,SPRN_SPRG_THREAD		/* current task's THREAD (phys) */
+	mfspr	r5,SPRN_SPRG_THREAD	/* current task's THREAD (phys) */
 	lwz	r4,THREAD_FPEXC_MODE(r5)
 	ori	r9,r9,MSR_FP		/* enable FP for current */
 	or	r9,r9,r4
@@ -172,9 +137,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	or	r12,r12,r4
 	std	r12,_MSR(r1)
 #endif
-	lfd	fr0,THREAD_FPSCR(r5)
+	addi	r7,r5,THREAD_FPSTATE
+	lfd	fr0,FPSTATE_FPSCR(r7)
 	MTFSF_L(fr0)
-	REST_32FPVSRS(0, R4, R5)
+	REST_32FPVSRS(0, R4, R7)
 #ifndef CONFIG_SMP
 	subi	r4,r5,THREAD
 	fromreal(r4)
@@ -208,9 +174,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	addi	r3,r3,THREAD	        /* want THREAD of task */
 	PPC_LL	r5,PT_REGS(r3)
 	PPC_LCMPI	0,r5,0
-	SAVE_32FPVSRS(0, R4 ,R3)
+	addi	r6,r3,THREAD_FPSTATE
+	SAVE_32FPVSRS(0, R4, R6)
 	mffs	fr0
-	stfd	fr0,THREAD_FPSCR(r3)
+	stfd	fr0,FPSTATE_FPSCR(r6)
 	beq	1f
 	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 	li	r3,MSR_FP|MSR_FE0|MSR_FE1
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 96d2fdf3aa9e..7a281416affb 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1113,12 +1113,10 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
 #ifdef CONFIG_VSX
 	current->thread.used_vsr = 0;
 #endif
-	memset(current->thread.fpr, 0, sizeof(current->thread.fpr));
-	current->thread.fpscr.val = 0;
+	memset(&current->thread.fp_state, 0, sizeof(current->thread.fp_state));
 #ifdef CONFIG_ALTIVEC
-	memset(current->thread.vr, 0, sizeof(current->thread.vr));
-	memset(&current->thread.vscr, 0, sizeof(current->thread.vscr));
-	current->thread.vscr.u[3] = 0x00010000; /* Java mode disabled */
+	memset(&current->thread.vr_state, 0, sizeof(current->thread.vr_state));
+	current->thread.vr_state.vscr.u[3] = 0x00010000; /* Java mode disabled */
 	current->thread.vrsave = 0;
 	current->thread.used_vr = 0;
 #endif /* CONFIG_ALTIVEC */
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 9a0d24c390a3..238580043d85 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -362,7 +362,7 @@ static int fpr_get(struct task_struct *target, const struct user_regset *regset,
 		   void *kbuf, void __user *ubuf)
 {
 #ifdef CONFIG_VSX
-	double buf[33];
+	u64 buf[33];
 	int i;
 #endif
 	flush_fp_to_thread(target);
@@ -371,15 +371,15 @@ static int fpr_get(struct task_struct *target, const struct user_regset *regset,
 	/* copy to local buffer then write that out */
 	for (i = 0; i < 32 ; i++)
 		buf[i] = target->thread.TS_FPR(i);
-	memcpy(&buf[32], &target->thread.fpscr, sizeof(double));
+	buf[32] = target->thread.fp_state.fpscr;
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
 
 #else
-	BUILD_BUG_ON(offsetof(struct thread_struct, fpscr) !=
-		     offsetof(struct thread_struct, TS_FPR(32)));
+	BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
+		     offsetof(struct thread_fp_state, fpr[32][0]));
 
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				   &target->thread.fpr, 0, -1);
+				   &target->thread.fp_state, 0, -1);
 #endif
 }
 
@@ -388,7 +388,7 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset,
 		   const void *kbuf, const void __user *ubuf)
 {
 #ifdef CONFIG_VSX
-	double buf[33];
+	u64 buf[33];
 	int i;
 #endif
 	flush_fp_to_thread(target);
@@ -400,14 +400,14 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset,
 		return i;
 	for (i = 0; i < 32 ; i++)
 		target->thread.TS_FPR(i) = buf[i];
-	memcpy(&target->thread.fpscr, &buf[32], sizeof(double));
+	target->thread.fp_state.fpscr = buf[32];
 	return 0;
 #else
-	BUILD_BUG_ON(offsetof(struct thread_struct, fpscr) !=
-		     offsetof(struct thread_struct, TS_FPR(32)));
+	BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
+		     offsetof(struct thread_fp_state, fpr[32][0]));
 
 	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				  &target->thread.fpr, 0, -1);
+				  &target->thread.fp_state, 0, -1);
 #endif
 }
 
@@ -440,11 +440,11 @@ static int vr_get(struct task_struct *target, const struct user_regset *regset,
 
 	flush_altivec_to_thread(target);
 
-	BUILD_BUG_ON(offsetof(struct thread_struct, vscr) !=
-		     offsetof(struct thread_struct, vr[32]));
+	BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
+		     offsetof(struct thread_vr_state, vr[32]));
 
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				  &target->thread.vr, 0,
+				  &target->thread.vr_state, 0,
 				  33 * sizeof(vector128));
 	if (!ret) {
 		/*
@@ -471,11 +471,12 @@ static int vr_set(struct task_struct *target, const struct user_regset *regset,
 
 	flush_altivec_to_thread(target);
 
-	BUILD_BUG_ON(offsetof(struct thread_struct, vscr) !=
-		     offsetof(struct thread_struct, vr[32]));
+	BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
+		     offsetof(struct thread_vr_state, vr[32]));
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &target->thread.vr, 0, 33 * sizeof(vector128));
+				 &target->thread.vr_state, 0,
+				 33 * sizeof(vector128));
 	if (!ret && count > 0) {
 		/*
 		 * We use only the first word of vrsave.
@@ -514,13 +515,13 @@ static int vsr_get(struct task_struct *target, const struct user_regset *regset,
 		   unsigned int pos, unsigned int count,
 		   void *kbuf, void __user *ubuf)
 {
-	double buf[32];
+	u64 buf[32];
 	int ret, i;
 
 	flush_vsx_to_thread(target);
 
 	for (i = 0; i < 32 ; i++)
-		buf[i] = target->thread.fpr[i][TS_VSRLOWOFFSET];
+		buf[i] = target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET];
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  buf, 0, 32 * sizeof(double));
 
@@ -531,7 +532,7 @@ static int vsr_set(struct task_struct *target, const struct user_regset *regset,
 		   unsigned int pos, unsigned int count,
 		   const void *kbuf, const void __user *ubuf)
 {
-	double buf[32];
+	u64 buf[32];
 	int ret,i;
 
 	flush_vsx_to_thread(target);
@@ -539,7 +540,7 @@ static int vsr_set(struct task_struct *target, const struct user_regset *regset,
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 buf, 0, 32 * sizeof(double));
 	for (i = 0; i < 32 ; i++)
-		target->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+		target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
 
 
 	return ret;
@@ -1554,10 +1555,10 @@ long arch_ptrace(struct task_struct *child, long request,
 
 			flush_fp_to_thread(child);
 			if (fpidx < (PT_FPSCR - PT_FPR0))
-				tmp = ((unsigned long *)child->thread.fpr)
+				tmp = ((unsigned long *)child->thread.fp_state.fpr)
 					[fpidx * TS_FPRWIDTH];
 			else
-				tmp = child->thread.fpscr.val;
+				tmp = child->thread.fp_state.fpscr;
 		}
 		ret = put_user(tmp, datalp);
 		break;
@@ -1587,10 +1588,10 @@ long arch_ptrace(struct task_struct *child, long request,
 
 			flush_fp_to_thread(child);
 			if (fpidx < (PT_FPSCR - PT_FPR0))
-				((unsigned long *)child->thread.fpr)
+				((unsigned long *)child->thread.fp_state.fpr)
 					[fpidx * TS_FPRWIDTH] = data;
 			else
-				child->thread.fpscr.val = data;
+				child->thread.fp_state.fpscr = data;
 			ret = 0;
 		}
 		break;
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index f51599e941c7..097f8dc426a0 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -43,7 +43,6 @@
 #define FPRNUMBER(i) (((i) - PT_FPR0) >> 1)
 #define FPRHALF(i) (((i) - PT_FPR0) & 1)
 #define FPRINDEX(i) TS_FPRWIDTH * FPRNUMBER(i) * 2 + FPRHALF(i)
-#define FPRINDEX_3264(i) (TS_FPRWIDTH * ((i) - PT_FPR0))
 
 long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			compat_ulong_t caddr, compat_ulong_t cdata)
@@ -105,7 +104,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			 * to be an array of unsigned int (32 bits) - the
 			 * index passed in is based on this assumption.
 			 */
-			tmp = ((unsigned int *)child->thread.fpr)
+			tmp = ((unsigned int *)child->thread.fp_state.fpr)
 				[FPRINDEX(index)];
 		}
 		ret = put_user((unsigned int)tmp, (u32 __user *)data);
@@ -147,8 +146,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 		if (numReg >= PT_FPR0) {
 			flush_fp_to_thread(child);
 			/* get 64 bit FPR */
-			tmp = ((u64 *)child->thread.fpr)
-				[FPRINDEX_3264(numReg)];
+			tmp = child->thread.fp_state.fpr[numReg - PT_FPR0][0];
 		} else { /* register within PT_REGS struct */
 			unsigned long tmp2;
 			ret = ptrace_get_reg(child, numReg, &tmp2);
@@ -207,7 +205,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			 * to be an array of unsigned int (32 bits) - the
 			 * index passed in is based on this assumption.
 			 */
-			((unsigned int *)child->thread.fpr)
+			((unsigned int *)child->thread.fp_state.fpr)
 				[FPRINDEX(index)] = data;
 			ret = 0;
 		}
@@ -251,8 +249,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			u64 *tmp;
 			flush_fp_to_thread(child);
 			/* get 64 bit FPR ... */
-			tmp = &(((u64 *)child->thread.fpr)
-				[FPRINDEX_3264(numReg)]);
+			tmp = &child->thread.fp_state.fpr[numReg - PT_FPR0][0];
 			/* ... write the 32 bit part we want */
 			((u32 *)tmp)[index % 2] = data;
 			ret = 0;
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index bebdf1a1a540..ea25e45ea959 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -265,27 +265,27 @@ struct rt_sigframe {
 unsigned long copy_fpr_to_user(void __user *to,
 			       struct task_struct *task)
 {
-	double buf[ELF_NFPREG];
+	u64 buf[ELF_NFPREG];
 	int i;
 
 	/* save FPR copy to local buffer then write to the thread_struct */
 	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
 		buf[i] = task->thread.TS_FPR(i);
-	memcpy(&buf[i], &task->thread.fpscr, sizeof(double));
+	buf[i] = task->thread.fp_state.fpscr;
 	return __copy_to_user(to, buf, ELF_NFPREG * sizeof(double));
 }
 
 unsigned long copy_fpr_from_user(struct task_struct *task,
 				 void __user *from)
 {
-	double buf[ELF_NFPREG];
+	u64 buf[ELF_NFPREG];
 	int i;
 
 	if (__copy_from_user(buf, from, ELF_NFPREG * sizeof(double)))
 		return 1;
 	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
 		task->thread.TS_FPR(i) = buf[i];
-	memcpy(&task->thread.fpscr, &buf[i], sizeof(double));
+	task->thread.fp_state.fpscr = buf[i];
 
 	return 0;
 }
@@ -293,25 +293,25 @@ unsigned long copy_fpr_from_user(struct task_struct *task,
 unsigned long copy_vsx_to_user(void __user *to,
 			       struct task_struct *task)
 {
-	double buf[ELF_NVSRHALFREG];
+	u64 buf[ELF_NVSRHALFREG];
 	int i;
 
 	/* save FPR copy to local buffer then write to the thread_struct */
 	for (i = 0; i < ELF_NVSRHALFREG; i++)
-		buf[i] = task->thread.fpr[i][TS_VSRLOWOFFSET];
+		buf[i] = task->thread.fp_state.fpr[i][TS_VSRLOWOFFSET];
 	return __copy_to_user(to, buf, ELF_NVSRHALFREG * sizeof(double));
 }
 
 unsigned long copy_vsx_from_user(struct task_struct *task,
 				 void __user *from)
 {
-	double buf[ELF_NVSRHALFREG];
+	u64 buf[ELF_NVSRHALFREG];
 	int i;
 
 	if (__copy_from_user(buf, from, ELF_NVSRHALFREG * sizeof(double)))
 		return 1;
 	for (i = 0; i < ELF_NVSRHALFREG ; i++)
-		task->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+		task->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
 	return 0;
 }
 
@@ -319,27 +319,27 @@ unsigned long copy_vsx_from_user(struct task_struct *task,
 unsigned long copy_transact_fpr_to_user(void __user *to,
 				  struct task_struct *task)
 {
-	double buf[ELF_NFPREG];
+	u64 buf[ELF_NFPREG];
 	int i;
 
 	/* save FPR copy to local buffer then write to the thread_struct */
 	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
 		buf[i] = task->thread.TS_TRANS_FPR(i);
-	memcpy(&buf[i], &task->thread.transact_fpscr, sizeof(double));
+	buf[i] = task->thread.transact_fp.fpscr;
 	return __copy_to_user(to, buf, ELF_NFPREG * sizeof(double));
 }
 
 unsigned long copy_transact_fpr_from_user(struct task_struct *task,
 					  void __user *from)
 {
-	double buf[ELF_NFPREG];
+	u64 buf[ELF_NFPREG];
 	int i;
 
 	if (__copy_from_user(buf, from, ELF_NFPREG * sizeof(double)))
 		return 1;
 	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
 		task->thread.TS_TRANS_FPR(i) = buf[i];
-	memcpy(&task->thread.transact_fpscr, &buf[i], sizeof(double));
+	task->thread.transact_fp.fpscr = buf[i];
 
 	return 0;
 }
@@ -347,25 +347,25 @@ unsigned long copy_transact_fpr_from_user(struct task_struct *task,
 unsigned long copy_transact_vsx_to_user(void __user *to,
 				  struct task_struct *task)
 {
-	double buf[ELF_NVSRHALFREG];
+	u64 buf[ELF_NVSRHALFREG];
 	int i;
 
 	/* save FPR copy to local buffer then write to the thread_struct */
 	for (i = 0; i < ELF_NVSRHALFREG; i++)
-		buf[i] = task->thread.transact_fpr[i][TS_VSRLOWOFFSET];
+		buf[i] = task->thread.transact_fp.fpr[i][TS_VSRLOWOFFSET];
 	return __copy_to_user(to, buf, ELF_NVSRHALFREG * sizeof(double));
 }
 
 unsigned long copy_transact_vsx_from_user(struct task_struct *task,
 					  void __user *from)
 {
-	double buf[ELF_NVSRHALFREG];
+	u64 buf[ELF_NVSRHALFREG];
 	int i;
 
 	if (__copy_from_user(buf, from, ELF_NVSRHALFREG * sizeof(double)))
 		return 1;
 	for (i = 0; i < ELF_NVSRHALFREG ; i++)
-		task->thread.transact_fpr[i][TS_VSRLOWOFFSET] = buf[i];
+		task->thread.transact_fp.fpr[i][TS_VSRLOWOFFSET] = buf[i];
 	return 0;
 }
 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
@@ -373,14 +373,14 @@ unsigned long copy_transact_vsx_from_user(struct task_struct *task,
 inline unsigned long copy_fpr_to_user(void __user *to,
 				      struct task_struct *task)
 {
-	return __copy_to_user(to, task->thread.fpr,
+	return __copy_to_user(to, task->thread.fp_state.fpr,
 			      ELF_NFPREG * sizeof(double));
 }
 
 inline unsigned long copy_fpr_from_user(struct task_struct *task,
 					void __user *from)
 {
-	return __copy_from_user(task->thread.fpr, from,
+	return __copy_from_user(task->thread.fp_state.fpr, from,
 			      ELF_NFPREG * sizeof(double));
 }
 
@@ -388,14 +388,14 @@ inline unsigned long copy_fpr_from_user(struct task_struct *task,
 inline unsigned long copy_transact_fpr_to_user(void __user *to,
 					 struct task_struct *task)
 {
-	return __copy_to_user(to, task->thread.transact_fpr,
+	return __copy_to_user(to, task->thread.transact_fp.fpr,
 			      ELF_NFPREG * sizeof(double));
 }
 
 inline unsigned long copy_transact_fpr_from_user(struct task_struct *task,
 						 void __user *from)
 {
-	return __copy_from_user(task->thread.transact_fpr, from,
+	return __copy_from_user(task->thread.transact_fp.fpr, from,
 				ELF_NFPREG * sizeof(double));
 }
 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
@@ -423,7 +423,7 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 	/* save altivec registers */
 	if (current->thread.used_vr) {
 		flush_altivec_to_thread(current);
-		if (__copy_to_user(&frame->mc_vregs, current->thread.vr,
+		if (__copy_to_user(&frame->mc_vregs, &current->thread.vr_state,
 				   ELF_NVRREG * sizeof(vector128)))
 			return 1;
 		/* set MSR_VEC in the saved MSR value to indicate that
@@ -534,17 +534,17 @@ static int save_tm_user_regs(struct pt_regs *regs,
 	/* save altivec registers */
 	if (current->thread.used_vr) {
 		flush_altivec_to_thread(current);
-		if (__copy_to_user(&frame->mc_vregs, current->thread.vr,
+		if (__copy_to_user(&frame->mc_vregs, &current->thread.vr_state,
 				   ELF_NVRREG * sizeof(vector128)))
 			return 1;
 		if (msr & MSR_VEC) {
 			if (__copy_to_user(&tm_frame->mc_vregs,
-					   current->thread.transact_vr,
+					   &current->thread.transact_vr,
 					   ELF_NVRREG * sizeof(vector128)))
 				return 1;
 		} else {
 			if (__copy_to_user(&tm_frame->mc_vregs,
-					   current->thread.vr,
+					   &current->thread.vr_state,
 					   ELF_NVRREG * sizeof(vector128)))
 				return 1;
 		}
@@ -692,11 +692,12 @@ static long restore_user_regs(struct pt_regs *regs,
 	regs->msr &= ~MSR_VEC;
 	if (msr & MSR_VEC) {
 		/* restore altivec registers from the stack */
-		if (__copy_from_user(current->thread.vr, &sr->mc_vregs,
+		if (__copy_from_user(&current->thread.vr_state, &sr->mc_vregs,
 				     sizeof(sr->mc_vregs)))
 			return 1;
 	} else if (current->thread.used_vr)
-		memset(current->thread.vr, 0, ELF_NVRREG * sizeof(vector128));
+		memset(&current->thread.vr_state, 0,
+		       ELF_NVRREG * sizeof(vector128));
 
 	/* Always get VRSAVE back */
 	if (__get_user(current->thread.vrsave, (u32 __user *)&sr->mc_vregs[32]))
@@ -722,7 +723,7 @@ static long restore_user_regs(struct pt_regs *regs,
 			return 1;
 	} else if (current->thread.used_vsr)
 		for (i = 0; i < 32 ; i++)
-			current->thread.fpr[i][TS_VSRLOWOFFSET] = 0;
+			current->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0;
 #endif /* CONFIG_VSX */
 	/*
 	 * force the process to reload the FP registers from
@@ -798,15 +799,16 @@ static long restore_tm_user_regs(struct pt_regs *regs,
 	regs->msr &= ~MSR_VEC;
 	if (msr & MSR_VEC) {
 		/* restore altivec registers from the stack */
-		if (__copy_from_user(current->thread.vr, &sr->mc_vregs,
+		if (__copy_from_user(&current->thread.vr_state, &sr->mc_vregs,
 				     sizeof(sr->mc_vregs)) ||
-		    __copy_from_user(current->thread.transact_vr,
+		    __copy_from_user(&current->thread.transact_vr,
 				     &tm_sr->mc_vregs,
 				     sizeof(sr->mc_vregs)))
 			return 1;
 	} else if (current->thread.used_vr) {
-		memset(current->thread.vr, 0, ELF_NVRREG * sizeof(vector128));
-		memset(current->thread.transact_vr, 0,
+		memset(&current->thread.vr_state, 0,
+		       ELF_NVRREG * sizeof(vector128));
+		memset(&current->thread.transact_vr, 0,
 		       ELF_NVRREG * sizeof(vector128));
 	}
 
@@ -838,8 +840,8 @@ static long restore_tm_user_regs(struct pt_regs *regs,
 			return 1;
 	} else if (current->thread.used_vsr)
 		for (i = 0; i < 32 ; i++) {
-			current->thread.fpr[i][TS_VSRLOWOFFSET] = 0;
-			current->thread.transact_fpr[i][TS_VSRLOWOFFSET] = 0;
+			current->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0;
+			current->thread.transact_fp.fpr[i][TS_VSRLOWOFFSET] = 0;
 		}
 #endif /* CONFIG_VSX */
 
@@ -1030,7 +1032,7 @@ int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka,
 		if (__put_user(0, &rt_sf->uc.uc_link))
 			goto badframe;
 
-	current->thread.fpscr.val = 0;	/* turn off all fp exceptions */
+	current->thread.fp_state.fpscr = 0;	/* turn off all fp exceptions */
 
 	/* create a stack frame for the caller of the handler */
 	newsp = ((unsigned long)rt_sf) - (__SIGNAL_FRAMESIZE + 16);
@@ -1462,7 +1464,7 @@ int handle_signal32(unsigned long sig, struct k_sigaction *ka,
 
 	regs->link = tramp;
 
-	current->thread.fpscr.val = 0;	/* turn off all fp exceptions */
+	current->thread.fp_state.fpscr = 0;	/* turn off all fp exceptions */
 
 	/* create a stack frame for the caller of the handler */
 	newsp = ((unsigned long)frame) - __SIGNAL_FRAMESIZE;
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index f93ec2835a13..a3c1ed4b979c 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -103,7 +103,8 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 	if (current->thread.used_vr) {
 		flush_altivec_to_thread(current);
 		/* Copy 33 vec registers (vr0..31 and vscr) to the stack */
-		err |= __copy_to_user(v_regs, current->thread.vr, 33 * sizeof(vector128));
+		err |= __copy_to_user(v_regs, &current->thread.vr_state,
+				      33 * sizeof(vector128));
 		/* set MSR_VEC in the MSR value in the frame to indicate that sc->v_reg)
 		 * contains valid data.
 		 */
@@ -195,18 +196,18 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc,
 	if (current->thread.used_vr) {
 		flush_altivec_to_thread(current);
 		/* Copy 33 vec registers (vr0..31 and vscr) to the stack */
-		err |= __copy_to_user(v_regs, current->thread.vr,
+		err |= __copy_to_user(v_regs, &current->thread.vr_state,
 				      33 * sizeof(vector128));
 		/* If VEC was enabled there are transactional VRs valid too,
 		 * else they're a copy of the checkpointed VRs.
 		 */
 		if (msr & MSR_VEC)
 			err |= __copy_to_user(tm_v_regs,
-					      current->thread.transact_vr,
+					      &current->thread.transact_vr,
 					      33 * sizeof(vector128));
 		else
 			err |= __copy_to_user(tm_v_regs,
-					      current->thread.vr,
+					      &current->thread.vr_state,
 					      33 * sizeof(vector128));
 
 		/* set MSR_VEC in the MSR value in the frame to indicate
@@ -349,10 +350,10 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 		return -EFAULT;
 	/* Copy 33 vec registers (vr0..31 and vscr) from the stack */
 	if (v_regs != NULL && (msr & MSR_VEC) != 0)
-		err |= __copy_from_user(current->thread.vr, v_regs,
+		err |= __copy_from_user(&current->thread.vr_state, v_regs,
 					33 * sizeof(vector128));
 	else if (current->thread.used_vr)
-		memset(current->thread.vr, 0, 33 * sizeof(vector128));
+		memset(&current->thread.vr_state, 0, 33 * sizeof(vector128));
 	/* Always get VRSAVE back */
 	if (v_regs != NULL)
 		err |= __get_user(current->thread.vrsave, (u32 __user *)&v_regs[33]);
@@ -374,7 +375,7 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 		err |= copy_vsx_from_user(current, v_regs);
 	else
 		for (i = 0; i < 32 ; i++)
-			current->thread.fpr[i][TS_VSRLOWOFFSET] = 0;
+			current->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0;
 #endif
 	return err;
 }
@@ -468,14 +469,14 @@ static long restore_tm_sigcontexts(struct pt_regs *regs,
 		return -EFAULT;
 	/* Copy 33 vec registers (vr0..31 and vscr) from the stack */
 	if (v_regs != NULL && tm_v_regs != NULL && (msr & MSR_VEC) != 0) {
-		err |= __copy_from_user(current->thread.vr, v_regs,
+		err |= __copy_from_user(&current->thread.vr_state, v_regs,
 					33 * sizeof(vector128));
-		err |= __copy_from_user(current->thread.transact_vr, tm_v_regs,
+		err |= __copy_from_user(&current->thread.transact_vr, tm_v_regs,
 					33 * sizeof(vector128));
 	}
 	else if (current->thread.used_vr) {
-		memset(current->thread.vr, 0, 33 * sizeof(vector128));
-		memset(current->thread.transact_vr, 0, 33 * sizeof(vector128));
+		memset(&current->thread.vr_state, 0, 33 * sizeof(vector128));
+		memset(&current->thread.transact_vr, 0, 33 * sizeof(vector128));
 	}
 	/* Always get VRSAVE back */
 	if (v_regs != NULL && tm_v_regs != NULL) {
@@ -507,8 +508,8 @@ static long restore_tm_sigcontexts(struct pt_regs *regs,
 		err |= copy_transact_vsx_from_user(current, tm_v_regs);
 	} else {
 		for (i = 0; i < 32 ; i++) {
-			current->thread.fpr[i][TS_VSRLOWOFFSET] = 0;
-			current->thread.transact_fpr[i][TS_VSRLOWOFFSET] = 0;
+			current->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0;
+			current->thread.transact_fp.fpr[i][TS_VSRLOWOFFSET] = 0;
 		}
 	}
 #endif
@@ -747,7 +748,7 @@ int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info,
 		goto badframe;
 
 	/* Make sure signal handler doesn't get spurious FP exceptions */
-	current->thread.fpscr.val = 0;
+	current->thread.fp_state.fpscr = 0;
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 	/* Remove TM bits from thread's MSR.  The MSR in the sigcontext
 	 * just indicates to userland that we were doing a transaction, but we
diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S
index cd809eaa8b5c..761af4f0a632 100644
--- a/arch/powerpc/kernel/tm.S
+++ b/arch/powerpc/kernel/tm.S
@@ -12,16 +12,15 @@
 #include <asm/reg.h>
 
 #ifdef CONFIG_VSX
-/* See fpu.S, this is very similar but to save/restore checkpointed FPRs/VSRs */
-#define __SAVE_32FPRS_VSRS_TRANSACT(n,c,base)	\
+/* See fpu.S, this is borrowed from there */
+#define __SAVE_32FPRS_VSRS(n,c,base)		\
 BEGIN_FTR_SECTION				\
 	b	2f;				\
 END_FTR_SECTION_IFSET(CPU_FTR_VSX);		\
-	SAVE_32FPRS_TRANSACT(n,base);		\
+	SAVE_32FPRS(n,base);			\
 	b	3f;				\
-2:	SAVE_32VSRS_TRANSACT(n,c,base);		\
+2:	SAVE_32VSRS(n,c,base);			\
 3:
-/* ...and this is just plain borrowed from there. */
 #define __REST_32FPRS_VSRS(n,c,base)		\
 BEGIN_FTR_SECTION				\
 	b	2f;				\
@@ -31,11 +30,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX);		\
 2:	REST_32VSRS(n,c,base);			\
 3:
 #else
-#define __SAVE_32FPRS_VSRS_TRANSACT(n,c,base) SAVE_32FPRS_TRANSACT(n, base)
-#define __REST_32FPRS_VSRS(n,c,base)	      REST_32FPRS(n, base)
+#define __SAVE_32FPRS_VSRS(n,c,base)	SAVE_32FPRS(n, base)
+#define __REST_32FPRS_VSRS(n,c,base)	REST_32FPRS(n, base)
 #endif
-#define SAVE_32FPRS_VSRS_TRANSACT(n,c,base) \
-	__SAVE_32FPRS_VSRS_TRANSACT(n,__REG_##c,__REG_##base)
+#define SAVE_32FPRS_VSRS(n,c,base) \
+	__SAVE_32FPRS_VSRS(n,__REG_##c,__REG_##base)
 #define REST_32FPRS_VSRS(n,c,base) \
 	__REST_32FPRS_VSRS(n,__REG_##c,__REG_##base)
 
@@ -157,10 +156,11 @@ _GLOBAL(tm_reclaim)
 	andis.		r0, r4, MSR_VEC@h
 	beq	dont_backup_vec
 
-	SAVE_32VRS_TRANSACT(0, r6, r3)	/* r6 scratch, r3 thread */
+	addi	r7, r3, THREAD_TRANSACT_VRSTATE
+	SAVE_32VRS(0, r6, r7)	/* r6 scratch, r7 transact vr state */
 	mfvscr	vr0
-	li	r6, THREAD_TRANSACT_VSCR
-	stvx	vr0, r3, r6
+	li	r6, VRSTATE_VSCR
+	stvx	vr0, r7, r6
 dont_backup_vec:
 	mfspr	r0, SPRN_VRSAVE
 	std	r0, THREAD_TRANSACT_VRSAVE(r3)
@@ -168,10 +168,11 @@ dont_backup_vec:
 	andi.	r0, r4, MSR_FP
 	beq	dont_backup_fp
 
-	SAVE_32FPRS_VSRS_TRANSACT(0, R6, R3)	/* r6 scratch, r3 thread */
+	addi	r7, r3, THREAD_TRANSACT_FPSTATE
+	SAVE_32FPRS_VSRS(0, R6, R7)	/* r6 scratch, r7 transact fp state */
 
 	mffs    fr0
-	stfd    fr0,THREAD_TRANSACT_FPSCR(r3)
+	stfd    fr0,FPSTATE_FPSCR(r7)
 
 dont_backup_fp:
 	/* The moment we treclaim, ALL of our GPRs will switch
@@ -358,10 +359,11 @@ _GLOBAL(tm_recheckpoint)
 	andis.	r0, r4, MSR_VEC@h
 	beq	dont_restore_vec
 
-	li	r5, THREAD_VSCR
-	lvx	vr0, r3, r5
+	addi	r8, r3, THREAD_VRSTATE
+	li	r5, VRSTATE_VSCR
+	lvx	vr0, r8, r5
 	mtvscr	vr0
-	REST_32VRS(0, r5, r3)			/* r5 scratch, r3 THREAD ptr */
+	REST_32VRS(0, r5, r8)			/* r5 scratch, r8 ptr */
 dont_restore_vec:
 	ld	r5, THREAD_VRSAVE(r3)
 	mtspr	SPRN_VRSAVE, r5
@@ -370,9 +372,10 @@ dont_restore_vec:
 	andi.	r0, r4, MSR_FP
 	beq	dont_restore_fp
 
-	lfd	fr0, THREAD_FPSCR(r3)
+	addi	r8, r3, THREAD_FPSTATE
+	lfd	fr0, FPSTATE_FPSCR(r8)
 	MTFSF_L(fr0)
-	REST_32FPRS_VSRS(0, R4, R3)
+	REST_32FPRS_VSRS(0, R4, R8)
 
 dont_restore_fp:
 	mtmsr	r6				/* FP/Vec off again! */
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index f783c932faeb..f0a6814007a5 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -816,7 +816,7 @@ static void parse_fpe(struct pt_regs *regs)
 
 	flush_fp_to_thread(current);
 
-	code = __parse_fpscr(current->thread.fpscr.val);
+	code = __parse_fpscr(current->thread.fp_state.fpscr);
 
 	_exception(SIGFPE, regs, code, regs->nip);
 }
@@ -1069,7 +1069,7 @@ static int emulate_math(struct pt_regs *regs)
 		return 0;
 	case 1: {
 			int code = 0;
-			code = __parse_fpscr(current->thread.fpscr.val);
+			code = __parse_fpscr(current->thread.fp_state.fpscr);
 			_exception(SIGFPE, regs, code, regs->nip);
 			return 0;
 		}
@@ -1371,8 +1371,6 @@ void facility_unavailable_exception(struct pt_regs *regs)
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 
-extern void do_load_up_fpu(struct pt_regs *regs);
-
 void fp_unavailable_tm(struct pt_regs *regs)
 {
 	/* Note:  This does not handle any kind of FP laziness. */
@@ -1403,8 +1401,6 @@ void fp_unavailable_tm(struct pt_regs *regs)
 }
 
 #ifdef CONFIG_ALTIVEC
-extern void do_load_up_altivec(struct pt_regs *regs);
-
 void altivec_unavailable_tm(struct pt_regs *regs)
 {
 	/* See the comments in fp_unavailable_tm().  This function operates
@@ -1634,7 +1630,7 @@ void altivec_assist_exception(struct pt_regs *regs)
 		/* XXX quick hack for now: set the non-Java bit in the VSCR */
 		printk_ratelimited(KERN_ERR "Unrecognized altivec instruction "
 				   "in %s at %lx\n", current->comm, regs->nip);
-		current->thread.vscr.u[3] |= 0x10000;
+		current->thread.vr_state.vscr.u[3] |= 0x10000;
 	}
 }
 #endif /* CONFIG_ALTIVEC */
diff --git a/arch/powerpc/kernel/vecemu.c b/arch/powerpc/kernel/vecemu.c
index 604d0947cb20..c4bfadb2606b 100644
--- a/arch/powerpc/kernel/vecemu.c
+++ b/arch/powerpc/kernel/vecemu.c
@@ -271,7 +271,7 @@ int emulate_altivec(struct pt_regs *regs)
 	vb = (instr >> 11) & 0x1f;
 	vc = (instr >> 6) & 0x1f;
 
-	vrs = current->thread.vr;
+	vrs = current->thread.vr_state.vr;
 	switch (instr & 0x3f) {
 	case 10:
 		switch (vc) {
@@ -320,12 +320,12 @@ int emulate_altivec(struct pt_regs *regs)
 		case 14:	/* vctuxs */
 			for (i = 0; i < 4; ++i)
 				vrs[vd].u[i] = ctuxs(vrs[vb].u[i], va,
-						&current->thread.vscr.u[3]);
+					&current->thread.vr_state.vscr.u[3]);
 			break;
 		case 15:	/* vctsxs */
 			for (i = 0; i < 4; ++i)
 				vrs[vd].u[i] = ctsxs(vrs[vb].u[i], va,
-						&current->thread.vscr.u[3]);
+					&current->thread.vr_state.vscr.u[3]);
 			break;
 		default:
 			return -EINVAL;
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index 9e20999aaef2..a48df870b696 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -8,29 +8,6 @@
 #include <asm/ptrace.h>
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-/*
- * Wrapper to call load_up_altivec from C.
- * void do_load_up_altivec(struct pt_regs *regs);
- */
-_GLOBAL(do_load_up_altivec)
-	mflr	r0
-	std	r0, 16(r1)
-	stdu	r1, -112(r1)
-
-	subi	r6, r3, STACK_FRAME_OVERHEAD
-	/* load_up_altivec expects r12=MSR, r13=PACA, and returns
-	 * with r12 = new MSR.
-	 */
-	ld	r12,_MSR(r6)
-	GET_PACA(r13)
-	bl	load_up_altivec
-	std	r12,_MSR(r6)
-
-	ld	r0, 112+16(r1)
-	addi	r1, r1, 112
-	mtlr	r0
-	blr
-
 /* void do_load_up_transact_altivec(struct thread_struct *thread)
  *
  * This is similar to load_up_altivec but for the transactional version of the
@@ -46,10 +23,11 @@ _GLOBAL(do_load_up_transact_altivec)
 	li	r4,1
 	stw	r4,THREAD_USED_VR(r3)
 
-	li	r10,THREAD_TRANSACT_VSCR
+	li	r10,THREAD_TRANSACT_VRSTATE+VRSTATE_VSCR
 	lvx	vr0,r10,r3
 	mtvscr	vr0
-	REST_32VRS_TRANSACT(0,r4,r3)
+	addi	r10,r3,THREAD_TRANSACT_VRSTATE
+	REST_32VRS(0,r4,r10)
 
 	/* Disable VEC again. */
 	MTMSRD(r6)
@@ -59,7 +37,6 @@ _GLOBAL(do_load_up_transact_altivec)
 #endif
 
 /*
- * load_up_altivec(unused, unused, tsk)
  * Disable VMX for the task which had it previously,
  * and save its vector registers in its thread_struct.
  * Enables the VMX for use in the kernel on return.
@@ -90,10 +67,11 @@ _GLOBAL(load_up_altivec)
 	/* Save VMX state to last_task_used_altivec's THREAD struct */
 	toreal(r4)
 	addi	r4,r4,THREAD
-	SAVE_32VRS(0,r5,r4)
+	addi	r7,r4,THREAD_VRSTATE
+	SAVE_32VRS(0,r5,r7)
 	mfvscr	vr0
-	li	r10,THREAD_VSCR
-	stvx	vr0,r10,r4
+	li	r10,VRSTATE_VSCR
+	stvx	vr0,r10,r7
 	/* Disable VMX for last_task_used_altivec */
 	PPC_LL	r5,PT_REGS(r4)
 	toreal(r5)
@@ -125,12 +103,13 @@ _GLOBAL(load_up_altivec)
 	oris	r12,r12,MSR_VEC@h
 	std	r12,_MSR(r1)
 #endif
+	addi	r7,r5,THREAD_VRSTATE
 	li	r4,1
-	li	r10,THREAD_VSCR
+	li	r10,VRSTATE_VSCR
 	stw	r4,THREAD_USED_VR(r5)
-	lvx	vr0,r10,r5
+	lvx	vr0,r10,r7
 	mtvscr	vr0
-	REST_32VRS(0,r4,r5)
+	REST_32VRS(0,r4,r7)
 #ifndef CONFIG_SMP
 	/* Update last_task_used_altivec to 'current' */
 	subi	r4,r5,THREAD		/* Back to 'current' */
@@ -165,12 +144,13 @@ _GLOBAL(giveup_altivec)
 	PPC_LCMPI	0,r3,0
 	beqlr				/* if no previous owner, done */
 	addi	r3,r3,THREAD		/* want THREAD of task */
+	addi	r7,r3,THREAD_VRSTATE
 	PPC_LL	r5,PT_REGS(r3)
 	PPC_LCMPI	0,r5,0
-	SAVE_32VRS(0,r4,r3)
+	SAVE_32VRS(0,r4,r7)
 	mfvscr	vr0
-	li	r4,THREAD_VSCR
-	stvx	vr0,r4,r3
+	li	r4,VRSTATE_VSCR
+	stvx	vr0,r4,r7
 	beq	1f
 	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 #ifdef CONFIG_VSX
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index 27db1e665959..c0b48f96a91c 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -444,7 +444,7 @@ void kvmppc_giveup_ext(struct kvm_vcpu *vcpu, ulong msr)
 #ifdef CONFIG_VSX
 	u64 *vcpu_vsx = vcpu->arch.vsr;
 #endif
-	u64 *thread_fpr = (u64*)t->fpr;
+	u64 *thread_fpr = &t->fp_state.fpr[0][0];
 	int i;
 
 	/*
@@ -466,14 +466,14 @@ void kvmppc_giveup_ext(struct kvm_vcpu *vcpu, ulong msr)
 		/*
 		 * Note that on CPUs with VSX, giveup_fpu stores
 		 * both the traditional FP registers and the added VSX
-		 * registers into thread.fpr[].
+		 * registers into thread.fp_state.fpr[].
 		 */
 		if (current->thread.regs->msr & MSR_FP)
 			giveup_fpu(current);
 		for (i = 0; i < ARRAY_SIZE(vcpu->arch.fpr); i++)
 			vcpu_fpr[i] = thread_fpr[get_fpr_index(i)];
 
-		vcpu->arch.fpscr = t->fpscr.val;
+		vcpu->arch.fpscr = t->fp_state.fpscr;
 
 #ifdef CONFIG_VSX
 		if (cpu_has_feature(CPU_FTR_VSX))
@@ -486,8 +486,8 @@ void kvmppc_giveup_ext(struct kvm_vcpu *vcpu, ulong msr)
 	if (msr & MSR_VEC) {
 		if (current->thread.regs->msr & MSR_VEC)
 			giveup_altivec(current);
-		memcpy(vcpu->arch.vr, t->vr, sizeof(vcpu->arch.vr));
-		vcpu->arch.vscr = t->vscr;
+		memcpy(vcpu->arch.vr, t->vr_state.vr, sizeof(vcpu->arch.vr));
+		vcpu->arch.vscr = t->vr_state.vscr;
 	}
 #endif
 
@@ -539,7 +539,7 @@ static int kvmppc_handle_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr,
 #ifdef CONFIG_VSX
 	u64 *vcpu_vsx = vcpu->arch.vsr;
 #endif
-	u64 *thread_fpr = (u64*)t->fpr;
+	u64 *thread_fpr = &t->fp_state.fpr[0][0];
 	int i;
 
 	/* When we have paired singles, we emulate in software */
@@ -584,15 +584,15 @@ static int kvmppc_handle_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr,
 		for (i = 0; i < ARRAY_SIZE(vcpu->arch.vsr) / 2; i++)
 			thread_fpr[get_fpr_index(i) + 1] = vcpu_vsx[i];
 #endif
-		t->fpscr.val = vcpu->arch.fpscr;
+		t->fp_state.fpscr = vcpu->arch.fpscr;
 		t->fpexc_mode = 0;
 		kvmppc_load_up_fpu();
 	}
 
 	if (msr & MSR_VEC) {
 #ifdef CONFIG_ALTIVEC
-		memcpy(t->vr, vcpu->arch.vr, sizeof(vcpu->arch.vr));
-		t->vscr = vcpu->arch.vscr;
+		memcpy(t->vr_state.vr, vcpu->arch.vr, sizeof(vcpu->arch.vr));
+		t->vr_state.vscr = vcpu->arch.vscr;
 		t->vrsave = -1;
 		kvmppc_load_up_altivec();
 #endif
@@ -1116,12 +1116,10 @@ void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu)
 int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 {
 	int ret;
-	double fpr[32][TS_FPRWIDTH];
-	unsigned int fpscr;
+	struct thread_fp_state fp;
 	int fpexc_mode;
 #ifdef CONFIG_ALTIVEC
-	vector128 vr[32];
-	vector128 vscr;
+	struct thread_vr_state vr;
 	unsigned long uninitialized_var(vrsave);
 	int used_vr;
 #endif
@@ -1153,8 +1151,7 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	/* Save FPU state in stack */
 	if (current->thread.regs->msr & MSR_FP)
 		giveup_fpu(current);
-	memcpy(fpr, current->thread.fpr, sizeof(current->thread.fpr));
-	fpscr = current->thread.fpscr.val;
+	fp = current->thread.fp_state;
 	fpexc_mode = current->thread.fpexc_mode;
 
 #ifdef CONFIG_ALTIVEC
@@ -1163,8 +1160,7 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	if (used_vr) {
 		if (current->thread.regs->msr & MSR_VEC)
 			giveup_altivec(current);
-		memcpy(vr, current->thread.vr, sizeof(current->thread.vr));
-		vscr = current->thread.vscr;
+		vr = current->thread.vr_state;
 		vrsave = current->thread.vrsave;
 	}
 #endif
@@ -1196,15 +1192,13 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	current->thread.regs->msr = ext_msr;
 
 	/* Restore FPU/VSX state from stack */
-	memcpy(current->thread.fpr, fpr, sizeof(current->thread.fpr));
-	current->thread.fpscr.val = fpscr;
+	current->thread.fp_state = fp;
 	current->thread.fpexc_mode = fpexc_mode;
 
 #ifdef CONFIG_ALTIVEC
 	/* Restore Altivec state from stack */
 	if (used_vr && current->thread.used_vr) {
-		memcpy(current->thread.vr, vr, sizeof(current->thread.vr));
-		current->thread.vscr = vscr;
+		current->thread.vr_state = vr;
 		current->thread.vrsave = vrsave;
 	}
 	current->thread.used_vr = used_vr;
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 17722d82f1d1..5133199f6cb7 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -656,9 +656,8 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 {
 	int ret, s;
 #ifdef CONFIG_PPC_FPU
-	unsigned int fpscr;
+	struct thread_fp_state fp;
 	int fpexc_mode;
-	u64 fpr[32];
 #endif
 
 	if (!vcpu->arch.sane) {
@@ -677,13 +676,13 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 #ifdef CONFIG_PPC_FPU
 	/* Save userspace FPU state in stack */
 	enable_kernel_fp();
-	memcpy(fpr, current->thread.fpr, sizeof(current->thread.fpr));
-	fpscr = current->thread.fpscr.val;
+	fp = current->thread.fp_state;
 	fpexc_mode = current->thread.fpexc_mode;
 
 	/* Restore guest FPU state to thread */
-	memcpy(current->thread.fpr, vcpu->arch.fpr, sizeof(vcpu->arch.fpr));
-	current->thread.fpscr.val = vcpu->arch.fpscr;
+	memcpy(current->thread.fp_state.fpr, vcpu->arch.fpr,
+	       sizeof(vcpu->arch.fpr));
+	current->thread.fp_state.fpscr = vcpu->arch.fpscr;
 
 	/*
 	 * Since we can't trap on MSR_FP in GS-mode, we consider the guest
@@ -709,12 +708,12 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	vcpu->fpu_active = 0;
 
 	/* Save guest FPU state from thread */
-	memcpy(vcpu->arch.fpr, current->thread.fpr, sizeof(vcpu->arch.fpr));
-	vcpu->arch.fpscr = current->thread.fpscr.val;
+	memcpy(vcpu->arch.fpr, current->thread.fp_state.fpr,
+	       sizeof(vcpu->arch.fpr));
+	vcpu->arch.fpscr = current->thread.fp_state.fpscr;
 
 	/* Restore userspace FPU state from stack */
-	memcpy(current->thread.fpr, fpr, sizeof(current->thread.fpr));
-	current->thread.fpscr.val = fpscr;
+	current->thread.fp_state = fp;
 	current->thread.fpexc_mode = fpexc_mode;
 #endif
 
-- 
cgit v1.2.3


From 18461960cbf50bf345ef0667d45d5f64de8fb893 Mon Sep 17 00:00:00 2001
From: Paul Mackerras
Date: Tue, 10 Sep 2013 20:21:10 +1000
Subject: powerpc: Provide for giveup_fpu/altivec to save state in alternate
 location

This provides a facility which is intended for use by KVM, where the
contents of the FP/VSX and VMX (Altivec) registers can be saved away
to somewhere other than the thread_struct when kernel code wants to
use floating point or VMX instructions.  This is done by providing a
pointer in the thread_struct to indicate where the state should be
saved to.  The giveup_fpu() and giveup_altivec() functions test these
pointers and save state to the indicated location if they are non-NULL.
Note that the MSR_FP/VEC bits in task->thread.regs->msr are still used
to indicate whether the CPU register state is live, even when an
alternate save location is being used.

This also provides load_fp_state() and load_vr_state() functions, which
load up FP/VSX and VMX state from memory into the CPU registers, and
corresponding store_fp_state() and store_vr_state() functions, which
store FP/VSX and VMX state into memory from the CPU registers.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/processor.h |  7 +++++++
 arch/powerpc/kernel/asm-offsets.c    |  2 ++
 arch/powerpc/kernel/fpu.S            | 25 ++++++++++++++++++++++++-
 arch/powerpc/kernel/ppc_ksyms.c      |  4 ++++
 arch/powerpc/kernel/process.c        |  7 +++++++
 arch/powerpc/kernel/vector.S         | 29 +++++++++++++++++++++++++++--
 6 files changed, 71 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index afe695e9feb8..ea88e7bd4a34 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -211,6 +211,7 @@ struct thread_struct {
 #endif
 #endif
 	struct thread_fp_state	fp_state;
+	struct thread_fp_state	*fp_save_area;
 	int		fpexc_mode;	/* floating-point exception mode */
 	unsigned int	align_ctl;	/* alignment handling control */
 #ifdef CONFIG_PPC64
@@ -229,6 +230,7 @@ struct thread_struct {
 	unsigned long	trap_nr;	/* last trap # on this thread */
 #ifdef CONFIG_ALTIVEC
 	struct thread_vr_state vr_state;
+	struct thread_vr_state *vr_save_area;
 	unsigned long	vrsave;
 	int		used_vr;	/* set if process has used altivec */
 #endif /* CONFIG_ALTIVEC */
@@ -357,6 +359,11 @@ extern int set_endian(struct task_struct *tsk, unsigned int val);
 extern int get_unalign_ctl(struct task_struct *tsk, unsigned long adr);
 extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val);
 
+extern void load_fp_state(struct thread_fp_state *fp);
+extern void store_fp_state(struct thread_fp_state *fp);
+extern void load_vr_state(struct thread_vr_state *vr);
+extern void store_vr_state(struct thread_vr_state *vr);
+
 static inline unsigned int __unpack_fe01(unsigned long msr_bits)
 {
 	return ((msr_bits & MSR_FE0) >> 10) | ((msr_bits & MSR_FE1) >> 8);
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 8d27b61c95b9..6278edddc3f8 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -91,9 +91,11 @@ int main(void)
 #endif
 	DEFINE(THREAD_FPEXC_MODE, offsetof(struct thread_struct, fpexc_mode));
 	DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fp_state));
+	DEFINE(THREAD_FPSAVEAREA, offsetof(struct thread_struct, fp_save_area));
 	DEFINE(FPSTATE_FPSCR, offsetof(struct thread_fp_state, fpscr));
 #ifdef CONFIG_ALTIVEC
 	DEFINE(THREAD_VRSTATE, offsetof(struct thread_struct, vr_state));
+	DEFINE(THREAD_VRSAVEAREA, offsetof(struct thread_struct, vr_save_area));
 	DEFINE(THREAD_VRSAVE, offsetof(struct thread_struct, vrsave));
 	DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr));
 	DEFINE(VRSTATE_VSCR, offsetof(struct thread_vr_state, vscr));
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index 34b96e6d2f0d..4dca05e91e95 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -80,6 +80,26 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	blr
 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
 
+/*
+ * Load state from memory into FP registers including FPSCR.
+ * Assumes the caller has enabled FP in the MSR.
+ */
+_GLOBAL(load_fp_state)
+	lfd	fr0,FPSTATE_FPSCR(r3)
+	MTFSF_L(fr0)
+	REST_32FPVSRS(0, R4, R3)
+	blr
+
+/*
+ * Store FP state into memory, including FPSCR
+ * Assumes the caller has enabled FP in the MSR.
+ */
+_GLOBAL(store_fp_state)
+	SAVE_32FPVSRS(0, R4, R3)
+	mffs	fr0
+	stfd	fr0,FPSTATE_FPSCR(r3)
+	blr
+
 /*
  * This task wants to use the FPU now.
  * On UP, disable FP for the task which had the FPU previously,
@@ -172,9 +192,12 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	PPC_LCMPI	0,r3,0
 	beqlr-				/* if no previous owner, done */
 	addi	r3,r3,THREAD	        /* want THREAD of task */
+	PPC_LL	r6,THREAD_FPSAVEAREA(r3)
 	PPC_LL	r5,PT_REGS(r3)
-	PPC_LCMPI	0,r5,0
+	PPC_LCMPI	0,r6,0
+	bne	2f
 	addi	r6,r3,THREAD_FPSTATE
+2:	PPC_LCMPI	0,r5,0
 	SAVE_32FPVSRS(0, R4, R6)
 	mffs	fr0
 	stfd	fr0,FPSTATE_FPSCR(r6)
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 21646dbe1bb3..56a4bec1b11a 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -98,9 +98,13 @@ EXPORT_SYMBOL(start_thread);
 
 #ifdef CONFIG_PPC_FPU
 EXPORT_SYMBOL(giveup_fpu);
+EXPORT_SYMBOL(load_fp_state);
+EXPORT_SYMBOL(store_fp_state);
 #endif
 #ifdef CONFIG_ALTIVEC
 EXPORT_SYMBOL(giveup_altivec);
+EXPORT_SYMBOL(load_vr_state);
+EXPORT_SYMBOL(store_vr_state);
 #endif /* CONFIG_ALTIVEC */
 #ifdef CONFIG_VSX
 EXPORT_SYMBOL(giveup_vsx);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 7a281416affb..8649a3d629e1 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1008,6 +1008,11 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	p->thread.ptrace_bps[0] = NULL;
 #endif
 
+	p->thread.fp_save_area = NULL;
+#ifdef CONFIG_ALTIVEC
+	p->thread.vr_save_area = NULL;
+#endif
+
 #ifdef CONFIG_PPC_STD_MMU_64
 	if (mmu_has_feature(MMU_FTR_SLB)) {
 		unsigned long sp_vsid;
@@ -1114,9 +1119,11 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
 	current->thread.used_vsr = 0;
 #endif
 	memset(&current->thread.fp_state, 0, sizeof(current->thread.fp_state));
+	current->thread.fp_save_area = NULL;
 #ifdef CONFIG_ALTIVEC
 	memset(&current->thread.vr_state, 0, sizeof(current->thread.vr_state));
 	current->thread.vr_state.vscr.u[3] = 0x00010000; /* Java mode disabled */
+	current->thread.vr_save_area = NULL;
 	current->thread.vrsave = 0;
 	current->thread.used_vr = 0;
 #endif /* CONFIG_ALTIVEC */
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index a48df870b696..eacda4eea2d7 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -36,6 +36,28 @@ _GLOBAL(do_load_up_transact_altivec)
 	blr
 #endif
 
+/*
+ * Load state from memory into VMX registers including VSCR.
+ * Assumes the caller has enabled VMX in the MSR.
+ */
+_GLOBAL(load_vr_state)
+	li	r4,VRSTATE_VSCR
+	lvx	vr0,r4,r3
+	mtvscr	vr0
+	REST_32VRS(0,r4,r3)
+	blr
+
+/*
+ * Store VMX state into memory, including VSCR.
+ * Assumes the caller has enabled VMX in the MSR.
+ */
+_GLOBAL(store_vr_state)
+	SAVE_32VRS(0, r4, r3)
+	mfvscr	vr0
+	li	r4, VRSTATE_VSCR
+	stvx	vr0, r4, r3
+	blr
+
 /*
  * Disable VMX for the task which had it previously,
  * and save its vector registers in its thread_struct.
@@ -144,9 +166,12 @@ _GLOBAL(giveup_altivec)
 	PPC_LCMPI	0,r3,0
 	beqlr				/* if no previous owner, done */
 	addi	r3,r3,THREAD		/* want THREAD of task */
-	addi	r7,r3,THREAD_VRSTATE
+	PPC_LL	r7,THREAD_VRSAVEAREA(r3)
 	PPC_LL	r5,PT_REGS(r3)
-	PPC_LCMPI	0,r5,0
+	PPC_LCMPI	0,r7,0
+	bne	2f
+	addi	r7,r3,THREAD_VRSTATE
+2:	PPC_LCMPI	0,r5,0
 	SAVE_32VRS(0,r4,r7)
 	mfvscr	vr0
 	li	r4,VRSTATE_VSCR
-- 
cgit v1.2.3


From d1cb9d1af0bc11b7450a6032f43935c746609418 Mon Sep 17 00:00:00 2001
From: David Miller
Date: Thu, 3 Oct 2013 17:24:51 -0400
Subject: of: Make cpu node handling more portable.

Use for_each_node_by_type() to iterate all cpu nodes in the
system.

Provide and overridable function arch_find_n_match_cpu_physical_id,
which sees if the given device node matches 'cpu' and if so sets
'*thread' when non-NULL to the cpu thread number within the core.

The default implementation behaves the same as the existing code.

Add a sparc64 implementation.

Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
---
 arch/sparc/kernel/prom_64.c | 53 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/of/base.c           | 45 +++++++++++++++++++++++---------------
 include/linux/cpu.h         |  3 +++
 3 files changed, 84 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/prom_64.c b/arch/sparc/kernel/prom_64.c
index d397d7fc5c28..6b39125eb927 100644
--- a/arch/sparc/kernel/prom_64.c
+++ b/arch/sparc/kernel/prom_64.c
@@ -373,6 +373,59 @@ static const char *get_mid_prop(void)
 	return (tlb_type == spitfire ? "upa-portid" : "portid");
 }
 
+bool arch_find_n_match_cpu_physical_id(struct device_node *cpun,
+				       int cpu, unsigned int *thread)
+{
+	const char *mid_prop = get_mid_prop();
+	int this_cpu_id;
+
+	/* On hypervisor based platforms we interrogate the 'reg'
+	 * property.  On everything else we look for a 'upa-portis',
+	 * 'portid', or 'cpuid' property.
+	 */
+
+	if (tlb_type == hypervisor) {
+		struct property *prop = of_find_property(cpun, "reg", NULL);
+		u32 *regs;
+
+		if (!prop) {
+			pr_warn("CPU node missing reg property\n");
+			return false;
+		}
+		regs = prop->value;
+		this_cpu_id = regs[0] & 0x0fffffff;
+	} else {
+		this_cpu_id = of_getintprop_default(cpun, mid_prop, -1);
+
+		if (this_cpu_id < 0) {
+			mid_prop = "cpuid";
+			this_cpu_id = of_getintprop_default(cpun, mid_prop, -1);
+		}
+		if (this_cpu_id < 0) {
+			pr_warn("CPU node missing cpu ID property\n");
+			return false;
+		}
+	}
+	if (this_cpu_id == cpu) {
+		if (thread) {
+			int proc_id = cpu_data(cpu).proc_id;
+
+			/* On sparc64, the cpu thread information is obtained
+			 * either from OBP or the machine description.  We've
+			 * actually probed this information already long before
+			 * this interface gets called so instead of interrogating
+			 * both the OF node and the MDESC again, just use what
+			 * we discovered already.
+			 */
+			if (proc_id < 0)
+				proc_id = 0;
+			*thread = proc_id;
+		}
+		return true;
+	}
+	return false;
+}
+
 static void *of_iterate_over_cpus(void *(*func)(struct device_node *, int, int), int arg)
 {
 	struct device_node *dp;
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 7d4c70f859e3..e4c99453adf1 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -280,6 +280,31 @@ static bool __of_find_n_match_cpu_property(struct device_node *cpun,
 	return false;
 }
 
+/*
+ * arch_find_n_match_cpu_physical_id - See if the given device node is
+ * for the cpu corresponding to logical cpu 'cpu'.  Return true if so,
+ * else false.  If 'thread' is non-NULL, the local thread number within the
+ * core is returned in it.
+ */
+bool __weak arch_find_n_match_cpu_physical_id(struct device_node *cpun,
+					      int cpu, unsigned int *thread)
+{
+	/* Check for non-standard "ibm,ppc-interrupt-server#s" property
+	 * for thread ids on PowerPC. If it doesn't exist fallback to
+	 * standard "reg" property.
+	 */
+	if (IS_ENABLED(CONFIG_PPC) &&
+	    __of_find_n_match_cpu_property(cpun,
+					   "ibm,ppc-interrupt-server#s",
+					   cpu, thread))
+		return true;
+
+	if (__of_find_n_match_cpu_property(cpun, "reg", cpu, thread))
+		return true;
+
+	return false;
+}
+
 /**
  * of_get_cpu_node - Get device node associated with the given logical CPU
  *
@@ -300,24 +325,10 @@ static bool __of_find_n_match_cpu_property(struct device_node *cpun,
  */
 struct device_node *of_get_cpu_node(int cpu, unsigned int *thread)
 {
-	struct device_node *cpun, *cpus;
-
-	cpus = of_find_node_by_path("/cpus");
-	if (!cpus)
-		return NULL;
+	struct device_node *cpun;
 
-	for_each_child_of_node(cpus, cpun) {
-		if (of_node_cmp(cpun->type, "cpu"))
-			continue;
-		/* Check for non-standard "ibm,ppc-interrupt-server#s" property
-		 * for thread ids on PowerPC. If it doesn't exist fallback to
-		 * standard "reg" property.
-		 */
-		if (IS_ENABLED(CONFIG_PPC) &&
-			__of_find_n_match_cpu_property(cpun,
-				"ibm,ppc-interrupt-server#s", cpu, thread))
-			return cpun;
-		if (__of_find_n_match_cpu_property(cpun, "reg", cpu, thread))
+	for_each_node_by_type(cpun, "cpu") {
+		if (arch_find_n_match_cpu_physical_id(cpun, cpu, thread))
 			return cpun;
 	}
 	return NULL;
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index 801ff9e73679..fbd25c3c2923 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -18,6 +18,7 @@
 #include <linux/cpumask.h>
 
 struct device;
+struct device_node;
 
 struct cpu {
 	int node_id;		/* The node which contains the CPU */
@@ -29,6 +30,8 @@ extern int register_cpu(struct cpu *cpu, int num);
 extern struct device *get_cpu_device(unsigned cpu);
 extern bool cpu_is_hotpluggable(unsigned cpu);
 extern bool arch_match_cpu_phys_id(int cpu, u64 phys_id);
+extern bool arch_find_n_match_cpu_physical_id(struct device_node *cpun,
+					      int cpu, unsigned int *thread);
 
 extern int cpu_add_dev_attr(struct device_attribute *attr);
 extern void cpu_remove_dev_attr(struct device_attribute *attr);
-- 
cgit v1.2.3


From 9536c8d2da8059b00775bd9c5a84816b608cf6f4 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra
Date: Tue, 15 Oct 2013 12:14:04 +0200
Subject: perf/x86: Optimize intel_pmu_pebs_fixup_ip()

There's been reports of high NMI handler overhead, highlighted by
such kernel messages:

  [ 3697.380195] perf samples too long (10009 > 10000), lowering kernel.perf_event_max_sample_rate to 13000
  [ 3697.389509] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 9.331 msecs

Don Zickus analyzed the source of the overhead and reported:

 > While there are a few places that are causing latencies, for now I focused on
 > the longest one first.  It seems to be 'copy_user_from_nmi'
 >
 > intel_pmu_handle_irq ->
 >	intel_pmu_drain_pebs_nhm ->
 >		__intel_pmu_drain_pebs_nhm ->
 >			__intel_pmu_pebs_event ->
 >				intel_pmu_pebs_fixup_ip ->
 >					copy_from_user_nmi
 >
 > In intel_pmu_pebs_fixup_ip(), if the while-loop goes over 50, the sum of
 > all the copy_from_user_nmi latencies seems to go over 1,000,000 cycles
 > (there are some cases where only 10 iterations are needed to go that high
 > too, but in generall over 50 or so).  At this point copy_user_from_nmi
 > seems to account for over 90% of the nmi latency.

The solution to that is to avoid having to call copy_from_user_nmi() for
every instruction.

Since we already limit the max basic block size, we can easily
pre-allocate a piece of memory to copy the entire thing into in one
go.

Don reported this test result:

 > Your patch made a huge difference in improvement.  The
 > copy_from_user_nmi() no longer hits the million of cycles.  I still
 > have a batch of 100,000-300,000 cycles.  My longest NMI paths used
 > to be dominated by copy_from_user_nmi, now it is not (I have to dig
 > up the new hot path).

Reported-and-tested-by: Don Zickus <dzickus@redhat.com>
Cc: jmario@redhat.com
Cc: acme@infradead.org
Cc: dave.hansen@linux.intel.com
Cc: eranian@google.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131016105755.GX10651@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/cpu/perf_event_intel_ds.c | 52 ++++++++++++++++++++++---------
 1 file changed, 38 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index 32e9ed81cd00..c1760ff3c757 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -12,6 +12,7 @@
 
 #define BTS_BUFFER_SIZE		(PAGE_SIZE << 4)
 #define PEBS_BUFFER_SIZE	PAGE_SIZE
+#define PEBS_FIXUP_SIZE		PAGE_SIZE
 
 /*
  * pebs_record_32 for p4 and core not supported
@@ -228,12 +229,14 @@ void fini_debug_store_on_cpu(int cpu)
 	wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA, 0, 0);
 }
 
+static DEFINE_PER_CPU(void *, insn_buffer);
+
 static int alloc_pebs_buffer(int cpu)
 {
 	struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds;
 	int node = cpu_to_node(cpu);
 	int max, thresh = 1; /* always use a single PEBS record */
-	void *buffer;
+	void *buffer, *ibuffer;
 
 	if (!x86_pmu.pebs)
 		return 0;
@@ -242,6 +245,19 @@ static int alloc_pebs_buffer(int cpu)
 	if (unlikely(!buffer))
 		return -ENOMEM;
 
+	/*
+	 * HSW+ already provides us the eventing ip; no need to allocate this
+	 * buffer then.
+	 */
+	if (x86_pmu.intel_cap.pebs_format < 2) {
+		ibuffer = kzalloc_node(PEBS_FIXUP_SIZE, GFP_KERNEL, node);
+		if (!ibuffer) {
+			kfree(buffer);
+			return -ENOMEM;
+		}
+		per_cpu(insn_buffer, cpu) = ibuffer;
+	}
+
 	max = PEBS_BUFFER_SIZE / x86_pmu.pebs_record_size;
 
 	ds->pebs_buffer_base = (u64)(unsigned long)buffer;
@@ -262,6 +278,9 @@ static void release_pebs_buffer(int cpu)
 	if (!ds || !x86_pmu.pebs)
 		return;
 
+	kfree(per_cpu(insn_buffer, cpu));
+	per_cpu(insn_buffer, cpu) = NULL;
+
 	kfree((void *)(unsigned long)ds->pebs_buffer_base);
 	ds->pebs_buffer_base = 0;
 }
@@ -729,6 +748,7 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs)
 	unsigned long old_to, to = cpuc->lbr_entries[0].to;
 	unsigned long ip = regs->ip;
 	int is_64bit = 0;
+	void *kaddr;
 
 	/*
 	 * We don't need to fixup if the PEBS assist is fault like
@@ -752,7 +772,7 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs)
 	 * unsigned math, either ip is before the start (impossible) or
 	 * the basic block is larger than 1 page (sanity)
 	 */
-	if ((ip - to) > PAGE_SIZE)
+	if ((ip - to) > PEBS_FIXUP_SIZE)
 		return 0;
 
 	/*
@@ -763,29 +783,33 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs)
 		return 1;
 	}
 
+	if (!kernel_ip(ip)) {
+		int size, bytes;
+		u8 *buf = this_cpu_read(insn_buffer);
+
+		size = ip - to; /* Must fit our buffer, see above */
+		bytes = copy_from_user_nmi(buf, (void __user *)to, size);
+		if (bytes != size)
+			return 0;
+
+		kaddr = buf;
+	} else {
+		kaddr = (void *)to;
+	}
+
 	do {
 		struct insn insn;
-		u8 buf[MAX_INSN_SIZE];
-		void *kaddr;
 
 		old_to = to;
-		if (!kernel_ip(ip)) {
-			int bytes, size = MAX_INSN_SIZE;
-
-			bytes = copy_from_user_nmi(buf, (void __user *)to, size);
-			if (bytes != size)
-				return 0;
-
-			kaddr = buf;
-		} else
-			kaddr = (void *)to;
 
 #ifdef CONFIG_X86_64
 		is_64bit = kernel_ip(to) || !test_thread_flag(TIF_IA32);
 #endif
 		insn_init(&insn, kaddr, is_64bit);
 		insn_get_length(&insn);
+
 		to += insn.length;
+		kaddr += insn.length;
 	} while (to < ip);
 
 	if (to == ip) {
-- 
cgit v1.2.3


From 6cf09b9d1762f40ba76a7c0271f00031abecc5dc Mon Sep 17 00:00:00 2001
From: Paul Bolle
Date: Wed, 15 May 2013 11:21:01 +0200
Subject: powerpc: remove dependency on MV64360

The Kconfig entry that allows to "Distribute interrupts on all CPUs by
default" has a (negative) dependency on MV64360. But that Kconfig symbol
was removed in v2.6.27, which means that this dependency has evaluated
to true ever since. It can be removed too.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 875d815a8e7f..5f15468300bf 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -420,7 +420,7 @@ config FA_DUMP
 
 config IRQ_ALL_CPUS
 	bool "Distribute interrupts on all CPUs by default"
-	depends on SMP && !MV64360
+	depends on SMP
 	help
 	  This option gives the kernel permission to distribute IRQs across
 	  multiple CPUs.  Saying N here will route all IRQs to the first
-- 
cgit v1.2.3


From 6b310fc58db27318309a04621d3a4509f1c7845a Mon Sep 17 00:00:00 2001
From: Mihai Caraman
Date: Mon, 1 Jul 2013 18:35:30 +0300
Subject: powerpc/booke64: Use common defines for AltiVec interrupts numbers

On Book3E some SPE/FP/AltiVec interrupts share the same number. Use
common defines to indentify these numbers.

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/exceptions-64e.S | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 68d74b45232d..e7751561fd1d 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -399,7 +399,7 @@ interrupt_end_book3e:
 
 /* Altivec Unavailable Interrupt */
 	START_EXCEPTION(altivec_unavailable);
-	NORMAL_EXCEPTION_PROLOG(0x200, BOOKE_INTERRUPT_ALTIVEC_UNAVAIL,
+	NORMAL_EXCEPTION_PROLOG(0x200, BOOKE_INTERRUPT_SPE_ALTIVEC_UNAVAIL,
 				PROLOG_ADDITION_NONE)
 	/* we can probably do a shorter exception entry for that one... */
 	EXCEPTION_COMMON(0x200, PACA_EXGEN, INTS_KEEP)
@@ -421,7 +421,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 
 /* AltiVec Assist */
 	START_EXCEPTION(altivec_assist);
-	NORMAL_EXCEPTION_PROLOG(0x220, BOOKE_INTERRUPT_ALTIVEC_ASSIST,
+	NORMAL_EXCEPTION_PROLOG(0x220,
+				BOOKE_INTERRUPT_SPE_FP_DATA_ALTIVEC_ASSIST,
 				PROLOG_ADDITION_NONE)
 	EXCEPTION_COMMON(0x220, PACA_EXGEN, INTS_DISABLE)
 	bl	.save_nvgprs
-- 
cgit v1.2.3


From c58ce397a62ec14b7b06c407a4173ed667e20d5f Mon Sep 17 00:00:00 2001
From: Mihai Caraman
Date: Mon, 1 Jul 2013 18:35:31 +0300
Subject: powerpc/fsl-booke: Use common defines for SPE/FP interrupts numbers

On Book3E some SPE/FP/AltiVec interrupts share the same number. Use
common defines to indentify these numbers.

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
[scottwood@freescale.com: fixed space-before-tab]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/head_fsl_booke.S | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 289afaffbbb5..f45726a1d963 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -555,27 +555,27 @@ END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
 #ifdef CONFIG_SPE
 	/* SPE Unavailable */
 	START_EXCEPTION(SPEUnavailable)
-	NORMAL_EXCEPTION_PROLOG(SPE_UNAVAIL)
+	NORMAL_EXCEPTION_PROLOG(SPE_ALTIVEC_UNAVAIL)
 	beq	1f
 	bl	load_up_spe
 	b	fast_exception_return
 1:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_EE_LITE(0x2010, KernelSPE)
 #else
-	EXCEPTION(0x2020, SPE_UNAVAIL, SPEUnavailable, \
+	EXCEPTION(0x2020, SPE_ALTIVEC_UNAVAIL, SPEUnavailable, \
 		  unknown_exception, EXC_XFER_EE)
 #endif /* CONFIG_SPE */
 
 	/* SPE Floating Point Data */
 #ifdef CONFIG_SPE
-	EXCEPTION(0x2030, SPE_FP_DATA, SPEFloatingPointData, \
-		  SPEFloatingPointException, EXC_XFER_EE);
+	EXCEPTION(0x2030, SPE_FP_DATA_ALTIVEC_ASSIST, SPEFloatingPointData,
+		  SPEFloatingPointException, EXC_XFER_EE)
 
 	/* SPE Floating Point Round */
 	EXCEPTION(0x2050, SPE_FP_ROUND, SPEFloatingPointRound, \
 		  SPEFloatingPointRoundException, EXC_XFER_EE)
 #else
-	EXCEPTION(0x2040, SPE_FP_DATA, SPEFloatingPointData, \
+	EXCEPTION(0x2040, SPE_FP_DATA_ALTIVEC_ASSIST, SPEFloatingPointData,
 		  unknown_exception, EXC_XFER_EE)
 	EXCEPTION(0x2050, SPE_FP_ROUND, SPEFloatingPointRound, \
 		  unknown_exception, EXC_XFER_EE)
-- 
cgit v1.2.3


From 9863c28a2af90a56c088f5f6288d7f6d2c923c14 Mon Sep 17 00:00:00 2001
From: James Yang
Date: Wed, 3 Jul 2013 16:26:47 -0500
Subject: powerpc: Emulate sync instruction variants

Reserved fields of the sync instruction have been used for other
instructions (e.g. lwsync).  On processors that do not support variants
of the sync instruction, emulate it by executing a sync to subsume the
effect of the intended instruction.

Signed-off-by: James Yang <James.Yang@freescale.com>
[scottwood@freescale.com: whitespace and subject line fix]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/include/asm/ppc-opcode.h | 2 ++
 arch/powerpc/kernel/traps.c           | 7 +++++++
 2 files changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index ad5fcf51b252..442edee4b6aa 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -143,6 +143,8 @@
 #define PPC_INST_LSWX			0x7c00042a
 #define PPC_INST_LWARX			0x7c000028
 #define PPC_INST_LWSYNC			0x7c2004ac
+#define PPC_INST_SYNC			0x7c0004ac
+#define PPC_INST_SYNC_MASK		0xfc0007fe
 #define PPC_INST_LXVD2X			0x7c000698
 #define PPC_INST_MCRXR			0x7c000400
 #define PPC_INST_MCRXR_MASK		0xfc0007fe
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index f0a6814007a5..36a1f95a2a36 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1018,6 +1018,13 @@ static int emulate_instruction(struct pt_regs *regs)
 		return emulate_isel(regs, instword);
 	}
 
+	/* Emulate sync instruction variants */
+	if ((instword & PPC_INST_SYNC_MASK) == PPC_INST_SYNC) {
+		PPC_WARN_EMULATED(sync, regs);
+		asm volatile("sync");
+		return 0;
+	}
+
 #ifdef CONFIG_PPC64
 	/* Emulate the mfspr rD, DSCR. */
 	if ((((instword & PPC_INST_MFSPR_DSCR_USER_MASK) ==
-- 
cgit v1.2.3


From 001d4c7aea587ce0865c07ec45aa56ecbefd431a Mon Sep 17 00:00:00 2001
From: Kuppuswamy Sathyanarayanan
Date: Thu, 17 Oct 2013 15:35:25 -0700
Subject: mrst: Fixed printk/pr_* related issues

Fixed printk and pr_* related issues in mrst related files.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-2-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/platform/mrst/early_printk_mrst.c | 2 +-
 arch/x86/platform/mrst/mrst.c              | 2 +-
 arch/x86/platform/mrst/vrtc.c              | 5 ++---
 3 files changed, 4 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c
index 028454f0c3a5..95880f7f34de 100644
--- a/arch/x86/platform/mrst/early_printk_mrst.c
+++ b/arch/x86/platform/mrst/early_printk_mrst.c
@@ -213,7 +213,7 @@ static void early_mrst_spi_putc(char c)
 	}
 
 	if (!timeout)
-		pr_warning("MRST earlycon: timed out\n");
+		pr_warn("MRST earlycon: timed out\n");
 	else
 		max3110_write_data(c);
 }
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index 3ca5957b7a34..b9aeb5464d82 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -328,7 +328,7 @@ static inline int __init setup_x86_mrst_timer(char *arg)
 	else if (strcmp("lapic_and_apbt", arg) == 0)
 		mrst_timer_options = MRST_TIMER_LAPIC_APBT;
 	else {
-		pr_warning("X86 MRST timer option %s not recognised"
+		pr_warn("X86 MRST timer option %s not recognised"
 			   " use x86_mrst_timer=apbt_only or lapic_and_apbt\n",
 			   arg);
 		return -EINVAL;
diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c
index 5e355b134ba4..ca4f7d999fd1 100644
--- a/arch/x86/platform/mrst/vrtc.c
+++ b/arch/x86/platform/mrst/vrtc.c
@@ -79,7 +79,7 @@ void vrtc_get_time(struct timespec *now)
 	/* vRTC YEAR reg contains the offset to 1972 */
 	year += 1972;
 
-	printk(KERN_INFO "vRTC: sec: %d min: %d hour: %d day: %d "
+	pr_info("vRTC: sec: %d min: %d hour: %d day: %d "
 		"mon: %d year: %d\n", sec, min, hour, mday, mon, year);
 
 	now->tv_sec = mktime(year, mon, mday, hour, min, sec);
@@ -109,8 +109,7 @@ int vrtc_set_mmss(const struct timespec *now)
 		vrtc_cmos_write(tm.tm_sec, RTC_SECONDS);
 		spin_unlock_irqrestore(&rtc_lock, flags);
 	} else {
-		printk(KERN_ERR
-		       "%s: Invalid vRTC value: write of %lx to vRTC failed\n",
+		pr_err("%s: Invalid vRTC value: write of %lx to vRTC failed\n",
 			__FUNCTION__, now->tv_sec);
 		retval = -EINVAL;
 	}
-- 
cgit v1.2.3


From d8059302b374b351731ba503bb6f5bc88962d983 Mon Sep 17 00:00:00 2001
From: Kuppuswamy Sathyanarayanan
Date: Thu, 17 Oct 2013 15:35:26 -0700
Subject: mrst: Fixed indentation issues

Fixed indentation issues reported by checkpatch script in
mrst related files.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-3-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/platform/mrst/early_printk_mrst.c |  3 ++-
 arch/x86/platform/mrst/mrst.c              | 24 +++++++++++++-----------
 2 files changed, 15 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c
index 95880f7f34de..39ecc276cd84 100644
--- a/arch/x86/platform/mrst/early_printk_mrst.c
+++ b/arch/x86/platform/mrst/early_printk_mrst.c
@@ -219,7 +219,8 @@ static void early_mrst_spi_putc(char c)
 }
 
 /* Early SPI only uses polling mode */
-static void early_mrst_spi_write(struct console *con, const char *str, unsigned n)
+static void early_mrst_spi_write(struct console *con, const char *str,
+					unsigned n)
 {
 	int i;
 
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index b9aeb5464d82..235a74244777 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -131,7 +131,7 @@ struct sfi_timer_table_entry *sfi_get_mtmr(int hint)
 	int i;
 	if (hint < sfi_mtimer_num) {
 		if (!sfi_mtimer_usage[hint]) {
-			pr_debug("hint taken for timer %d irq %d\n",\
+			pr_debug("hint taken for timer %d irq %d\n",
 				hint, sfi_mtimer_array[hint].irq);
 			sfi_mtimer_usage[hint] = 1;
 			return &sfi_mtimer_array[hint];
@@ -679,14 +679,14 @@ static void *msic_thermal_platform_data(void *info)
 /* tc35876x DSI-LVDS bridge chip and panel platform data */
 static void *tc35876x_platform_data(void *data)
 {
-       static struct tc35876x_platform_data pdata;
+	static struct tc35876x_platform_data pdata;
 
-       /* gpio pins set to -1 will not be used by the driver */
-       pdata.gpio_bridge_reset = get_gpio_by_name("LCMB_RXEN");
-       pdata.gpio_panel_bl_en = get_gpio_by_name("6S6P_BL_EN");
-       pdata.gpio_panel_vadd = get_gpio_by_name("EN_VREG_LCD_V3P3");
+	/* gpio pins set to -1 will not be used by the driver */
+	pdata.gpio_bridge_reset = get_gpio_by_name("LCMB_RXEN");
+	pdata.gpio_panel_bl_en = get_gpio_by_name("6S6P_BL_EN");
+	pdata.gpio_panel_vadd = get_gpio_by_name("EN_VREG_LCD_V3P3");
 
-       return &pdata;
+	return &pdata;
 }
 
 static const struct devs_id __initconst device_ids[] = {
@@ -729,7 +729,7 @@ static int i2c_next_dev;
 
 static void __init intel_scu_device_register(struct platform_device *pdev)
 {
-	if(ipc_next_dev == MAX_IPCDEVS)
+	if (ipc_next_dev == MAX_IPCDEVS)
 		pr_err("too many SCU IPC devices");
 	else
 		ipc_devs[ipc_next_dev++] = pdev;
@@ -872,7 +872,8 @@ static void __init sfi_handle_spi_dev(struct spi_board_info *spi_info)
 
 	while (dev->name[0]) {
 		if (dev->type == SFI_DEV_TYPE_SPI &&
-				!strncmp(dev->name, spi_info->modalias, SFI_NAME_LEN)) {
+			!strncmp(dev->name, spi_info->modalias,
+						SFI_NAME_LEN)) {
 			pdata = dev->get_platform_data(spi_info);
 			break;
 		}
@@ -904,7 +905,7 @@ static void __init sfi_handle_i2c_dev(int bus, struct i2c_board_info *i2c_info)
 		intel_scu_i2c_device_register(bus, i2c_info);
 	else
 		i2c_register_board_info(bus, i2c_info, 1);
- }
+}
 
 
 static int __init sfi_parse_devs(struct sfi_table_header *table)
@@ -1034,7 +1035,8 @@ static int __init pb_keys_init(void)
 	num = sizeof(gpio_button) / sizeof(struct gpio_keys_button);
 	for (i = 0; i < num; i++) {
 		gb[i].gpio = get_gpio_by_name(gb[i].desc);
-		pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc, gb[i].gpio);
+		pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc,
+					gb[i].gpio);
 		if (gb[i].gpio == -1)
 			continue;
 
-- 
cgit v1.2.3


From 05454c26eb3587b56abc5eb139797ac5afb6d77a Mon Sep 17 00:00:00 2001
From: Kuppuswamy Sathyanarayanan
Date: Thu, 17 Oct 2013 15:35:27 -0700
Subject: intel_mid: Renamed *mrst* to *intel_mid*

Following files contains code that is common to all intel mid
soc's. So renamed them as below.

mrst/mrst.c              -> intel-mid/intel-mid.c
mrst/vrtc.c              -> intel-mid/intel_mid_vrtc.c
mrst/early_printk_mrst.c -> intel-mid/intel_mid_vrtc.c
pci/mrst.c               -> pci/intel_mid_pci.c

Also, renamed the corresponding header files and made changes
to the driver files that included these header files.

To ensure that there are no functional changes, I have compared
the objdump of renamed files before and after rename and found
that the only difference is file name change.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-4-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/intel-mid.h                   |   81 ++
 arch/x86/include/asm/intel_mid_vrtc.h              |    9 +
 arch/x86/include/asm/mrst-vrtc.h                   |    9 -
 arch/x86/include/asm/mrst.h                        |   81 --
 arch/x86/kernel/apb_timer.c                        |    2 +-
 arch/x86/kernel/early_printk.c                     |    2 +-
 arch/x86/kernel/rtc.c                              |    2 +-
 arch/x86/pci/Makefile                              |    2 +-
 arch/x86/pci/intel_mid_pci.c                       |  310 ++++++
 arch/x86/pci/mrst.c                                |  310 ------
 arch/x86/platform/Makefile                         |    2 +-
 arch/x86/platform/intel-mid/Makefile               |    3 +
 .../platform/intel-mid/early_printk_intel_mid.c    |  325 ++++++
 arch/x86/platform/intel-mid/intel-mid.c            | 1055 ++++++++++++++++++++
 arch/x86/platform/intel-mid/intel_mid_vrtc.c       |  177 ++++
 arch/x86/platform/mrst/Makefile                    |    3 -
 arch/x86/platform/mrst/early_printk_mrst.c         |  325 ------
 arch/x86/platform/mrst/mrst.c                      | 1054 -------------------
 arch/x86/platform/mrst/vrtc.c                      |  177 ----
 drivers/gpu/drm/gma500/mdfld_dsi_output.h          |    2 +-
 drivers/gpu/drm/gma500/oaktrail_device.c           |    2 +-
 drivers/gpu/drm/gma500/oaktrail_lvds.c             |    2 +-
 drivers/platform/x86/intel_scu_ipc.c               |    2 +-
 drivers/rtc/rtc-mrst.c                             |    4 +-
 drivers/watchdog/intel_scu_watchdog.c              |    2 +-
 25 files changed, 1972 insertions(+), 1971 deletions(-)
 create mode 100644 arch/x86/include/asm/intel-mid.h
 create mode 100644 arch/x86/include/asm/intel_mid_vrtc.h
 delete mode 100644 arch/x86/include/asm/mrst-vrtc.h
 delete mode 100644 arch/x86/include/asm/mrst.h
 create mode 100644 arch/x86/pci/intel_mid_pci.c
 delete mode 100644 arch/x86/pci/mrst.c
 create mode 100644 arch/x86/platform/intel-mid/Makefile
 create mode 100644 arch/x86/platform/intel-mid/early_printk_intel_mid.c
 create mode 100644 arch/x86/platform/intel-mid/intel-mid.c
 create mode 100644 arch/x86/platform/intel-mid/intel_mid_vrtc.c
 delete mode 100644 arch/x86/platform/mrst/Makefile
 delete mode 100644 arch/x86/platform/mrst/early_printk_mrst.c
 delete mode 100644 arch/x86/platform/mrst/mrst.c
 delete mode 100644 arch/x86/platform/mrst/vrtc.c

(limited to 'arch')

diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
new file mode 100644
index 000000000000..cc79a4f7aeed
--- /dev/null
+++ b/arch/x86/include/asm/intel-mid.h
@@ -0,0 +1,81 @@
+/*
+ * intel-mid.h: Intel MID specific setup code
+ *
+ * (C) Copyright 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#ifndef _ASM_X86_INTEL_MID_H
+#define _ASM_X86_INTEL_MID_H
+
+#include <linux/sfi.h>
+
+extern int pci_mrst_init(void);
+extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
+extern int sfi_mrtc_num;
+extern struct sfi_rtc_table_entry sfi_mrtc_array[];
+
+/*
+ * Medfield is the follow-up of Moorestown, it combines two chip solution into
+ * one. Other than that it also added always-on and constant tsc and lapic
+ * timers. Medfield is the platform name, and the chip name is called Penwell
+ * we treat Medfield/Penwell as a variant of Moorestown. Penwell can be
+ * identified via MSRs.
+ */
+enum mrst_cpu_type {
+	/* 1 was Moorestown */
+	MRST_CPU_CHIP_PENWELL = 2,
+};
+
+extern enum mrst_cpu_type __mrst_cpu_chip;
+
+#ifdef CONFIG_X86_INTEL_MID
+
+static inline enum mrst_cpu_type mrst_identify_cpu(void)
+{
+	return __mrst_cpu_chip;
+}
+
+#else /* !CONFIG_X86_INTEL_MID */
+
+#define mrst_identify_cpu()    (0)
+
+#endif /* !CONFIG_X86_INTEL_MID */
+
+enum mrst_timer_options {
+	MRST_TIMER_DEFAULT,
+	MRST_TIMER_APBT_ONLY,
+	MRST_TIMER_LAPIC_APBT,
+};
+
+extern enum mrst_timer_options mrst_timer_options;
+
+/*
+ * Penwell uses spread spectrum clock, so the freq number is not exactly
+ * the same as reported by MSR based on SDM.
+ */
+#define PENWELL_FSB_FREQ_83SKU         83200
+#define PENWELL_FSB_FREQ_100SKU        99840
+
+#define SFI_MTMR_MAX_NUM 8
+#define SFI_MRTC_MAX	8
+
+extern struct console early_mrst_console;
+extern void mrst_early_console_init(void);
+
+extern struct console early_hsu_console;
+extern void hsu_early_console_init(const char *);
+
+extern void intel_scu_devices_create(void);
+extern void intel_scu_devices_destroy(void);
+
+/* VRTC timer */
+#define MRST_VRTC_MAP_SZ	(1024)
+/*#define MRST_VRTC_PGOFFSET	(0xc00) */
+
+extern void mrst_rtc_init(void);
+
+#endif /* _ASM_X86_INTEL_MID_H */
diff --git a/arch/x86/include/asm/intel_mid_vrtc.h b/arch/x86/include/asm/intel_mid_vrtc.h
new file mode 100644
index 000000000000..86ff4685c409
--- /dev/null
+++ b/arch/x86/include/asm/intel_mid_vrtc.h
@@ -0,0 +1,9 @@
+#ifndef _INTEL_MID_VRTC_H
+#define _INTEL_MID_VRTC_H
+
+extern unsigned char vrtc_cmos_read(unsigned char reg);
+extern void vrtc_cmos_write(unsigned char val, unsigned char reg);
+extern void vrtc_get_time(struct timespec *now);
+extern int vrtc_set_mmss(const struct timespec *now);
+
+#endif
diff --git a/arch/x86/include/asm/mrst-vrtc.h b/arch/x86/include/asm/mrst-vrtc.h
deleted file mode 100644
index 1e69a75412a4..000000000000
--- a/arch/x86/include/asm/mrst-vrtc.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _MRST_VRTC_H
-#define _MRST_VRTC_H
-
-extern unsigned char vrtc_cmos_read(unsigned char reg);
-extern void vrtc_cmos_write(unsigned char val, unsigned char reg);
-extern void vrtc_get_time(struct timespec *now);
-extern int vrtc_set_mmss(const struct timespec *now);
-
-#endif
diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
deleted file mode 100644
index fc18bf3ce7c8..000000000000
--- a/arch/x86/include/asm/mrst.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * mrst.h: Intel Moorestown platform specific setup code
- *
- * (C) Copyright 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-#ifndef _ASM_X86_MRST_H
-#define _ASM_X86_MRST_H
-
-#include <linux/sfi.h>
-
-extern int pci_mrst_init(void);
-extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
-extern int sfi_mrtc_num;
-extern struct sfi_rtc_table_entry sfi_mrtc_array[];
-
-/*
- * Medfield is the follow-up of Moorestown, it combines two chip solution into
- * one. Other than that it also added always-on and constant tsc and lapic
- * timers. Medfield is the platform name, and the chip name is called Penwell
- * we treat Medfield/Penwell as a variant of Moorestown. Penwell can be
- * identified via MSRs.
- */
-enum mrst_cpu_type {
-	/* 1 was Moorestown */
-	MRST_CPU_CHIP_PENWELL = 2,
-};
-
-extern enum mrst_cpu_type __mrst_cpu_chip;
-
-#ifdef CONFIG_X86_INTEL_MID
-
-static inline enum mrst_cpu_type mrst_identify_cpu(void)
-{
-	return __mrst_cpu_chip;
-}
-
-#else /* !CONFIG_X86_INTEL_MID */
-
-#define mrst_identify_cpu()    (0)
-
-#endif /* !CONFIG_X86_INTEL_MID */
-
-enum mrst_timer_options {
-	MRST_TIMER_DEFAULT,
-	MRST_TIMER_APBT_ONLY,
-	MRST_TIMER_LAPIC_APBT,
-};
-
-extern enum mrst_timer_options mrst_timer_options;
-
-/*
- * Penwell uses spread spectrum clock, so the freq number is not exactly
- * the same as reported by MSR based on SDM.
- */
-#define PENWELL_FSB_FREQ_83SKU         83200
-#define PENWELL_FSB_FREQ_100SKU        99840
-
-#define SFI_MTMR_MAX_NUM 8
-#define SFI_MRTC_MAX	8
-
-extern struct console early_mrst_console;
-extern void mrst_early_console_init(void);
-
-extern struct console early_hsu_console;
-extern void hsu_early_console_init(const char *);
-
-extern void intel_scu_devices_create(void);
-extern void intel_scu_devices_destroy(void);
-
-/* VRTC timer */
-#define MRST_VRTC_MAP_SZ	(1024)
-/*#define MRST_VRTC_PGOFFSET	(0xc00) */
-
-extern void mrst_rtc_init(void);
-
-#endif /* _ASM_X86_MRST_H */
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index c9876efecafb..915483604c0c 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -40,7 +40,7 @@
 
 #include <asm/fixmap.h>
 #include <asm/apb_timer.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
 #include <asm/time.h>
 
 #define APBT_CLOCKEVENT_RATING		110
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index d15f575a861b..38ca398fb787 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -14,7 +14,7 @@
 #include <xen/hvc-console.h>
 #include <asm/pci-direct.h>
 #include <asm/fixmap.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
 #include <asm/pgtable.h>
 #include <linux/usb/ehci_def.h>
 
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 0aa29394ed6f..a1b52fe77995 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -12,7 +12,7 @@
 #include <asm/vsyscall.h>
 #include <asm/x86_init.h>
 #include <asm/time.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
 #include <asm/rtc.h>
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index ee0af58ca5bd..e063eed0f912 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_X86_VISWS)		+= visws.o
 obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 obj-$(CONFIG_X86_NUMACHIP)	+= numachip.o
 
-obj-$(CONFIG_X86_INTEL_MID)	+= mrst.o
+obj-$(CONFIG_X86_INTEL_MID)	+= intel_mid_pci.o
 
 obj-y				+= common.o early.o
 obj-y				+= bus_numa.o
diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
new file mode 100644
index 000000000000..f8715f7c43c7
--- /dev/null
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -0,0 +1,310 @@
+/*
+ * Intel MID PCI support
+ *   Copyright (c) 2008 Intel Corporation
+ *     Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Moorestown has an interesting PCI implementation:
+ *   - configuration space is memory mapped (as defined by MCFG)
+ *   - Lincroft devices also have a real, type 1 configuration space
+ *   - Early Lincroft silicon has a type 1 access bug that will cause
+ *     a hang if non-existent devices are accessed
+ *   - some devices have the "fixed BAR" capability, which means
+ *     they can't be relocated or modified; check for that during
+ *     BAR sizing
+ *
+ * So, we use the MCFG space for all reads and writes, but also send
+ * Lincroft writes to type 1 space.  But only read/write if the device
+ * actually exists, otherwise return all 1s for reads and bit bucket
+ * the writes.
+ */
+
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+
+#include <asm/segment.h>
+#include <asm/pci_x86.h>
+#include <asm/hw_irq.h>
+#include <asm/io_apic.h>
+
+#define PCIE_CAP_OFFSET	0x100
+
+/* Fixed BAR fields */
+#define PCIE_VNDR_CAP_ID_FIXED_BAR 0x00	/* Fixed BAR (TBD) */
+#define PCI_FIXED_BAR_0_SIZE	0x04
+#define PCI_FIXED_BAR_1_SIZE	0x08
+#define PCI_FIXED_BAR_2_SIZE	0x0c
+#define PCI_FIXED_BAR_3_SIZE	0x10
+#define PCI_FIXED_BAR_4_SIZE	0x14
+#define PCI_FIXED_BAR_5_SIZE	0x1c
+
+static int pci_soc_mode;
+
+/**
+ * fixed_bar_cap - return the offset of the fixed BAR cap if found
+ * @bus: PCI bus
+ * @devfn: device in question
+ *
+ * Look for the fixed BAR cap on @bus and @devfn, returning its offset
+ * if found or 0 otherwise.
+ */
+static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn)
+{
+	int pos;
+	u32 pcie_cap = 0, cap_data;
+
+	pos = PCIE_CAP_OFFSET;
+
+	if (!raw_pci_ext_ops)
+		return 0;
+
+	while (pos) {
+		if (raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
+					  devfn, pos, 4, &pcie_cap))
+			return 0;
+
+		if (PCI_EXT_CAP_ID(pcie_cap) == 0x0000 ||
+			PCI_EXT_CAP_ID(pcie_cap) == 0xffff)
+			break;
+
+		if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) {
+			raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
+					      devfn, pos + 4, 4, &cap_data);
+			if ((cap_data & 0xffff) == PCIE_VNDR_CAP_ID_FIXED_BAR)
+				return pos;
+		}
+
+		pos = PCI_EXT_CAP_NEXT(pcie_cap);
+	}
+
+	return 0;
+}
+
+static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn,
+				   int reg, int len, u32 val, int offset)
+{
+	u32 size;
+	unsigned int domain, busnum;
+	int bar = (reg - PCI_BASE_ADDRESS_0) >> 2;
+
+	domain = pci_domain_nr(bus);
+	busnum = bus->number;
+
+	if (val == ~0 && len == 4) {
+		unsigned long decode;
+
+		raw_pci_ext_ops->read(domain, busnum, devfn,
+			       offset + 8 + (bar * 4), 4, &size);
+
+		/* Turn the size into a decode pattern for the sizing code */
+		if (size) {
+			decode = size - 1;
+			decode |= decode >> 1;
+			decode |= decode >> 2;
+			decode |= decode >> 4;
+			decode |= decode >> 8;
+			decode |= decode >> 16;
+			decode++;
+			decode = ~(decode - 1);
+		} else {
+			decode = 0;
+		}
+
+		/*
+		 * If val is all ones, the core code is trying to size the reg,
+		 * so update the mmconfig space with the real size.
+		 *
+		 * Note: this assumes the fixed size we got is a power of two.
+		 */
+		return raw_pci_ext_ops->write(domain, busnum, devfn, reg, 4,
+				       decode);
+	}
+
+	/* This is some other kind of BAR write, so just do it. */
+	return raw_pci_ext_ops->write(domain, busnum, devfn, reg, len, val);
+}
+
+/**
+ * type1_access_ok - check whether to use type 1
+ * @bus: bus number
+ * @devfn: device & function in question
+ *
+ * If the bus is on a Lincroft chip and it exists, or is not on a Lincroft at
+ * all, the we can go ahead with any reads & writes.  If it's on a Lincroft,
+ * but doesn't exist, avoid the access altogether to keep the chip from
+ * hanging.
+ */
+static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
+{
+	/*
+	 * This is a workaround for A0 LNC bug where PCI status register does
+	 * not have new CAP bit set. can not be written by SW either.
+	 *
+	 * PCI header type in real LNC indicates a single function device, this
+	 * will prevent probing other devices under the same function in PCI
+	 * shim. Therefore, use the header type in shim instead.
+	 */
+	if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE)
+		return 0;
+	if (bus == 0 && (devfn == PCI_DEVFN(2, 0)
+				|| devfn == PCI_DEVFN(0, 0)
+				|| devfn == PCI_DEVFN(3, 0)))
+		return 1;
+	return 0; /* Langwell on others */
+}
+
+static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+		    int size, u32 *value)
+{
+	if (type1_access_ok(bus->number, devfn, where))
+		return pci_direct_conf1.read(pci_domain_nr(bus), bus->number,
+					devfn, where, size, value);
+	return raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
+			      devfn, where, size, value);
+}
+
+static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+		     int size, u32 value)
+{
+	int offset;
+
+	/*
+	 * On MRST, there is no PCI ROM BAR, this will cause a subsequent read
+	 * to ROM BAR return 0 then being ignored.
+	 */
+	if (where == PCI_ROM_ADDRESS)
+		return 0;
+
+	/*
+	 * Devices with fixed BARs need special handling:
+	 *   - BAR sizing code will save, write ~0, read size, restore
+	 *   - so writes to fixed BARs need special handling
+	 *   - other writes to fixed BAR devices should go through mmconfig
+	 */
+	offset = fixed_bar_cap(bus, devfn);
+	if (offset &&
+	    (where >= PCI_BASE_ADDRESS_0 && where <= PCI_BASE_ADDRESS_5)) {
+		return pci_device_update_fixed(bus, devfn, where, size, value,
+					       offset);
+	}
+
+	/*
+	 * On Moorestown update both real & mmconfig space
+	 * Note: early Lincroft silicon can't handle type 1 accesses to
+	 *       non-existent devices, so just eat the write in that case.
+	 */
+	if (type1_access_ok(bus->number, devfn, where))
+		return pci_direct_conf1.write(pci_domain_nr(bus), bus->number,
+					      devfn, where, size, value);
+	return raw_pci_ext_ops->write(pci_domain_nr(bus), bus->number, devfn,
+			       where, size, value);
+}
+
+static int mrst_pci_irq_enable(struct pci_dev *dev)
+{
+	u8 pin;
+	struct io_apic_irq_attr irq_attr;
+
+	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+
+	/*
+	 * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
+	 * IOAPIC RTE entries, so we just enable RTE for the device.
+	 */
+	irq_attr.ioapic = mp_find_ioapic(dev->irq);
+	irq_attr.ioapic_pin = dev->irq;
+	irq_attr.trigger = 1; /* level */
+	irq_attr.polarity = 1; /* active low */
+	io_apic_set_pci_routing(&dev->dev, dev->irq, &irq_attr);
+
+	return 0;
+}
+
+struct pci_ops pci_mrst_ops = {
+	.read = pci_read,
+	.write = pci_write,
+};
+
+/**
+ * pci_mrst_init - installs pci_mrst_ops
+ *
+ * Moorestown has an interesting PCI implementation (see above).
+ * Called when the early platform detection installs it.
+ */
+int __init pci_mrst_init(void)
+{
+	pr_info("Intel MID platform detected, using MID PCI ops\n");
+	pci_mmcfg_late_init();
+	pcibios_enable_irq = mrst_pci_irq_enable;
+	pci_root_ops = pci_mrst_ops;
+	pci_soc_mode = 1;
+	/* Continue with standard init */
+	return 1;
+}
+
+/*
+ * Langwell devices are not true PCI devices; they are not subject to 10 ms
+ * d3 to d0 delay required by PCI spec.
+ */
+static void pci_d3delay_fixup(struct pci_dev *dev)
+{
+	/*
+	 * PCI fixups are effectively decided compile time. If we have a dual
+	 * SoC/non-SoC kernel we don't want to mangle d3 on non-SoC devices.
+	 */
+	if (!pci_soc_mode)
+		return;
+	/*
+	 * True PCI devices in Lincroft should allow type 1 access, the rest
+	 * are Langwell fake PCI devices.
+	 */
+	if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID))
+		return;
+	dev->d3_delay = 0;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3delay_fixup);
+
+static void mrst_power_off_unused_dev(struct pci_dev *dev)
+{
+	pci_set_power_state(dev, PCI_D3hot);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0801, mrst_power_off_unused_dev);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0809, mrst_power_off_unused_dev);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x080C, mrst_power_off_unused_dev);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0812, mrst_power_off_unused_dev);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0815, mrst_power_off_unused_dev);
+
+/*
+ * Langwell devices reside at fixed offsets, don't try to move them.
+ */
+static void pci_fixed_bar_fixup(struct pci_dev *dev)
+{
+	unsigned long offset;
+	u32 size;
+	int i;
+
+	if (!pci_soc_mode)
+		return;
+
+	/* Must have extended configuration space */
+	if (dev->cfg_size < PCIE_CAP_OFFSET + 4)
+		return;
+
+	/* Fixup the BAR sizes for fixed BAR devices and make them unmoveable */
+	offset = fixed_bar_cap(dev->bus, dev->devfn);
+	if (!offset || PCI_DEVFN(2, 0) == dev->devfn ||
+	    PCI_DEVFN(2, 2) == dev->devfn)
+		return;
+
+	for (i = 0; i < PCI_ROM_RESOURCE; i++) {
+		pci_read_config_dword(dev, offset + 8 + (i * 4), &size);
+		dev->resource[i].end = dev->resource[i].start + size - 1;
+		dev->resource[i].flags |= IORESOURCE_PCI_FIXED;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixed_bar_fixup);
diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c
deleted file mode 100644
index 903fded50786..000000000000
--- a/arch/x86/pci/mrst.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Moorestown PCI support
- *   Copyright (c) 2008 Intel Corporation
- *     Jesse Barnes <jesse.barnes@intel.com>
- *
- * Moorestown has an interesting PCI implementation:
- *   - configuration space is memory mapped (as defined by MCFG)
- *   - Lincroft devices also have a real, type 1 configuration space
- *   - Early Lincroft silicon has a type 1 access bug that will cause
- *     a hang if non-existent devices are accessed
- *   - some devices have the "fixed BAR" capability, which means
- *     they can't be relocated or modified; check for that during
- *     BAR sizing
- *
- * So, we use the MCFG space for all reads and writes, but also send
- * Lincroft writes to type 1 space.  But only read/write if the device
- * actually exists, otherwise return all 1s for reads and bit bucket
- * the writes.
- */
-
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/dmi.h>
-#include <linux/acpi.h>
-#include <linux/io.h>
-#include <linux/smp.h>
-
-#include <asm/segment.h>
-#include <asm/pci_x86.h>
-#include <asm/hw_irq.h>
-#include <asm/io_apic.h>
-
-#define PCIE_CAP_OFFSET	0x100
-
-/* Fixed BAR fields */
-#define PCIE_VNDR_CAP_ID_FIXED_BAR 0x00	/* Fixed BAR (TBD) */
-#define PCI_FIXED_BAR_0_SIZE	0x04
-#define PCI_FIXED_BAR_1_SIZE	0x08
-#define PCI_FIXED_BAR_2_SIZE	0x0c
-#define PCI_FIXED_BAR_3_SIZE	0x10
-#define PCI_FIXED_BAR_4_SIZE	0x14
-#define PCI_FIXED_BAR_5_SIZE	0x1c
-
-static int pci_soc_mode;
-
-/**
- * fixed_bar_cap - return the offset of the fixed BAR cap if found
- * @bus: PCI bus
- * @devfn: device in question
- *
- * Look for the fixed BAR cap on @bus and @devfn, returning its offset
- * if found or 0 otherwise.
- */
-static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn)
-{
-	int pos;
-	u32 pcie_cap = 0, cap_data;
-
-	pos = PCIE_CAP_OFFSET;
-
-	if (!raw_pci_ext_ops)
-		return 0;
-
-	while (pos) {
-		if (raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
-					  devfn, pos, 4, &pcie_cap))
-			return 0;
-
-		if (PCI_EXT_CAP_ID(pcie_cap) == 0x0000 ||
-			PCI_EXT_CAP_ID(pcie_cap) == 0xffff)
-			break;
-
-		if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) {
-			raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
-					      devfn, pos + 4, 4, &cap_data);
-			if ((cap_data & 0xffff) == PCIE_VNDR_CAP_ID_FIXED_BAR)
-				return pos;
-		}
-
-		pos = PCI_EXT_CAP_NEXT(pcie_cap);
-	}
-
-	return 0;
-}
-
-static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn,
-				   int reg, int len, u32 val, int offset)
-{
-	u32 size;
-	unsigned int domain, busnum;
-	int bar = (reg - PCI_BASE_ADDRESS_0) >> 2;
-
-	domain = pci_domain_nr(bus);
-	busnum = bus->number;
-
-	if (val == ~0 && len == 4) {
-		unsigned long decode;
-
-		raw_pci_ext_ops->read(domain, busnum, devfn,
-			       offset + 8 + (bar * 4), 4, &size);
-
-		/* Turn the size into a decode pattern for the sizing code */
-		if (size) {
-			decode = size - 1;
-			decode |= decode >> 1;
-			decode |= decode >> 2;
-			decode |= decode >> 4;
-			decode |= decode >> 8;
-			decode |= decode >> 16;
-			decode++;
-			decode = ~(decode - 1);
-		} else {
-			decode = 0;
-		}
-
-		/*
-		 * If val is all ones, the core code is trying to size the reg,
-		 * so update the mmconfig space with the real size.
-		 *
-		 * Note: this assumes the fixed size we got is a power of two.
-		 */
-		return raw_pci_ext_ops->write(domain, busnum, devfn, reg, 4,
-				       decode);
-	}
-
-	/* This is some other kind of BAR write, so just do it. */
-	return raw_pci_ext_ops->write(domain, busnum, devfn, reg, len, val);
-}
-
-/**
- * type1_access_ok - check whether to use type 1
- * @bus: bus number
- * @devfn: device & function in question
- *
- * If the bus is on a Lincroft chip and it exists, or is not on a Lincroft at
- * all, the we can go ahead with any reads & writes.  If it's on a Lincroft,
- * but doesn't exist, avoid the access altogether to keep the chip from
- * hanging.
- */
-static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
-{
-	/*
-	 * This is a workaround for A0 LNC bug where PCI status register does
-	 * not have new CAP bit set. can not be written by SW either.
-	 *
-	 * PCI header type in real LNC indicates a single function device, this
-	 * will prevent probing other devices under the same function in PCI
-	 * shim. Therefore, use the header type in shim instead.
-	 */
-	if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE)
-		return 0;
-	if (bus == 0 && (devfn == PCI_DEVFN(2, 0)
-				|| devfn == PCI_DEVFN(0, 0)
-				|| devfn == PCI_DEVFN(3, 0)))
-		return 1;
-	return 0; /* Langwell on others */
-}
-
-static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
-		    int size, u32 *value)
-{
-	if (type1_access_ok(bus->number, devfn, where))
-		return pci_direct_conf1.read(pci_domain_nr(bus), bus->number,
-					devfn, where, size, value);
-	return raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
-			      devfn, where, size, value);
-}
-
-static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
-		     int size, u32 value)
-{
-	int offset;
-
-	/*
-	 * On MRST, there is no PCI ROM BAR, this will cause a subsequent read
-	 * to ROM BAR return 0 then being ignored.
-	 */
-	if (where == PCI_ROM_ADDRESS)
-		return 0;
-
-	/*
-	 * Devices with fixed BARs need special handling:
-	 *   - BAR sizing code will save, write ~0, read size, restore
-	 *   - so writes to fixed BARs need special handling
-	 *   - other writes to fixed BAR devices should go through mmconfig
-	 */
-	offset = fixed_bar_cap(bus, devfn);
-	if (offset &&
-	    (where >= PCI_BASE_ADDRESS_0 && where <= PCI_BASE_ADDRESS_5)) {
-		return pci_device_update_fixed(bus, devfn, where, size, value,
-					       offset);
-	}
-
-	/*
-	 * On Moorestown update both real & mmconfig space
-	 * Note: early Lincroft silicon can't handle type 1 accesses to
-	 *       non-existent devices, so just eat the write in that case.
-	 */
-	if (type1_access_ok(bus->number, devfn, where))
-		return pci_direct_conf1.write(pci_domain_nr(bus), bus->number,
-					      devfn, where, size, value);
-	return raw_pci_ext_ops->write(pci_domain_nr(bus), bus->number, devfn,
-			       where, size, value);
-}
-
-static int mrst_pci_irq_enable(struct pci_dev *dev)
-{
-	u8 pin;
-	struct io_apic_irq_attr irq_attr;
-
-	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
-
-	/*
-	 * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
-	 * IOAPIC RTE entries, so we just enable RTE for the device.
-	 */
-	irq_attr.ioapic = mp_find_ioapic(dev->irq);
-	irq_attr.ioapic_pin = dev->irq;
-	irq_attr.trigger = 1; /* level */
-	irq_attr.polarity = 1; /* active low */
-	io_apic_set_pci_routing(&dev->dev, dev->irq, &irq_attr);
-
-	return 0;
-}
-
-struct pci_ops pci_mrst_ops = {
-	.read = pci_read,
-	.write = pci_write,
-};
-
-/**
- * pci_mrst_init - installs pci_mrst_ops
- *
- * Moorestown has an interesting PCI implementation (see above).
- * Called when the early platform detection installs it.
- */
-int __init pci_mrst_init(void)
-{
-	pr_info("Intel MID platform detected, using MID PCI ops\n");
-	pci_mmcfg_late_init();
-	pcibios_enable_irq = mrst_pci_irq_enable;
-	pci_root_ops = pci_mrst_ops;
-	pci_soc_mode = 1;
-	/* Continue with standard init */
-	return 1;
-}
-
-/*
- * Langwell devices are not true PCI devices; they are not subject to 10 ms
- * d3 to d0 delay required by PCI spec.
- */
-static void pci_d3delay_fixup(struct pci_dev *dev)
-{
-	/*
-	 * PCI fixups are effectively decided compile time. If we have a dual
-	 * SoC/non-SoC kernel we don't want to mangle d3 on non-SoC devices.
-	 */
-	if (!pci_soc_mode)
-		return;
-	/*
-	 * True PCI devices in Lincroft should allow type 1 access, the rest
-	 * are Langwell fake PCI devices.
-	 */
-	if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID))
-		return;
-	dev->d3_delay = 0;
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3delay_fixup);
-
-static void mrst_power_off_unused_dev(struct pci_dev *dev)
-{
-	pci_set_power_state(dev, PCI_D3hot);
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0801, mrst_power_off_unused_dev);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0809, mrst_power_off_unused_dev);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x080C, mrst_power_off_unused_dev);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0812, mrst_power_off_unused_dev);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0815, mrst_power_off_unused_dev);
-
-/*
- * Langwell devices reside at fixed offsets, don't try to move them.
- */
-static void pci_fixed_bar_fixup(struct pci_dev *dev)
-{
-	unsigned long offset;
-	u32 size;
-	int i;
-
-	if (!pci_soc_mode)
-		return;
-
-	/* Must have extended configuration space */
-	if (dev->cfg_size < PCIE_CAP_OFFSET + 4)
-		return;
-
-	/* Fixup the BAR sizes for fixed BAR devices and make them unmoveable */
-	offset = fixed_bar_cap(dev->bus, dev->devfn);
-	if (!offset || PCI_DEVFN(2, 0) == dev->devfn ||
-	    PCI_DEVFN(2, 2) == dev->devfn)
-		return;
-
-	for (i = 0; i < PCI_ROM_RESOURCE; i++) {
-		pci_read_config_dword(dev, offset + 8 + (i * 4), &size);
-		dev->resource[i].end = dev->resource[i].start + size - 1;
-		dev->resource[i].flags |= IORESOURCE_PCI_FIXED;
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixed_bar_fixup);
diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
index 01e0231a113e..20342d4c82ce 100644
--- a/arch/x86/platform/Makefile
+++ b/arch/x86/platform/Makefile
@@ -4,7 +4,7 @@ obj-y	+= efi/
 obj-y	+= geode/
 obj-y	+= goldfish/
 obj-y	+= iris/
-obj-y	+= mrst/
+obj-y	+= intel-mid/
 obj-y	+= olpc/
 obj-y	+= scx200/
 obj-y	+= sfi/
diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile
new file mode 100644
index 000000000000..de296358111e
--- /dev/null
+++ b/arch/x86/platform/intel-mid/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o
+obj-$(CONFIG_X86_INTEL_MID)	+= intel_mid_vrtc.o
+obj-$(CONFIG_EARLY_PRINTK_INTEL_MID)	+= early_printk_intel_mid.o
diff --git a/arch/x86/platform/intel-mid/early_printk_intel_mid.c b/arch/x86/platform/intel-mid/early_printk_intel_mid.c
new file mode 100644
index 000000000000..7c56e706fbee
--- /dev/null
+++ b/arch/x86/platform/intel-mid/early_printk_intel_mid.c
@@ -0,0 +1,325 @@
+/*
+ * early_printk_intel_mid.c - early consoles for Intel MID platforms
+ *
+ * Copyright (c) 2008-2010, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+/*
+ * This file implements two early consoles named mrst and hsu.
+ * mrst is based on Maxim3110 spi-uart device, it exists in both
+ * Moorestown and Medfield platforms, while hsu is based on a High
+ * Speed UART device which only exists in the Medfield platform
+ */
+
+#include <linux/serial_reg.h>
+#include <linux/serial_mfd.h>
+#include <linux/kmsg_dump.h>
+#include <linux/console.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/fixmap.h>
+#include <asm/pgtable.h>
+#include <asm/intel-mid.h>
+
+#define MRST_SPI_TIMEOUT		0x200000
+#define MRST_REGBASE_SPI0		0xff128000
+#define MRST_REGBASE_SPI1		0xff128400
+#define MRST_CLK_SPI0_REG		0xff11d86c
+
+/* Bit fields in CTRLR0 */
+#define SPI_DFS_OFFSET			0
+
+#define SPI_FRF_OFFSET			4
+#define SPI_FRF_SPI			0x0
+#define SPI_FRF_SSP			0x1
+#define SPI_FRF_MICROWIRE		0x2
+#define SPI_FRF_RESV			0x3
+
+#define SPI_MODE_OFFSET			6
+#define SPI_SCPH_OFFSET			6
+#define SPI_SCOL_OFFSET			7
+#define SPI_TMOD_OFFSET			8
+#define	SPI_TMOD_TR			0x0		/* xmit & recv */
+#define SPI_TMOD_TO			0x1		/* xmit only */
+#define SPI_TMOD_RO			0x2		/* recv only */
+#define SPI_TMOD_EPROMREAD		0x3		/* eeprom read mode */
+
+#define SPI_SLVOE_OFFSET		10
+#define SPI_SRL_OFFSET			11
+#define SPI_CFS_OFFSET			12
+
+/* Bit fields in SR, 7 bits */
+#define SR_MASK				0x7f		/* cover 7 bits */
+#define SR_BUSY				(1 << 0)
+#define SR_TF_NOT_FULL			(1 << 1)
+#define SR_TF_EMPT			(1 << 2)
+#define SR_RF_NOT_EMPT			(1 << 3)
+#define SR_RF_FULL			(1 << 4)
+#define SR_TX_ERR			(1 << 5)
+#define SR_DCOL				(1 << 6)
+
+struct dw_spi_reg {
+	u32	ctrl0;
+	u32	ctrl1;
+	u32	ssienr;
+	u32	mwcr;
+	u32	ser;
+	u32	baudr;
+	u32	txfltr;
+	u32	rxfltr;
+	u32	txflr;
+	u32	rxflr;
+	u32	sr;
+	u32	imr;
+	u32	isr;
+	u32	risr;
+	u32	txoicr;
+	u32	rxoicr;
+	u32	rxuicr;
+	u32	msticr;
+	u32	icr;
+	u32	dmacr;
+	u32	dmatdlr;
+	u32	dmardlr;
+	u32	idr;
+	u32	version;
+
+	/* Currently operates as 32 bits, though only the low 16 bits matter */
+	u32	dr;
+} __packed;
+
+#define dw_readl(dw, name)		__raw_readl(&(dw)->name)
+#define dw_writel(dw, name, val)	__raw_writel((val), &(dw)->name)
+
+/* Default use SPI0 register for mrst, we will detect Penwell and use SPI1 */
+static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0;
+
+static u32 *pclk_spi0;
+/* Always contains an accessible address, start with 0 */
+static struct dw_spi_reg *pspi;
+
+static struct kmsg_dumper dw_dumper;
+static int dumper_registered;
+
+static void dw_kmsg_dump(struct kmsg_dumper *dumper,
+			 enum kmsg_dump_reason reason)
+{
+	static char line[1024];
+	size_t len;
+
+	/* When run to this, we'd better re-init the HW */
+	mrst_early_console_init();
+
+	while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len))
+		early_mrst_console.write(&early_mrst_console, line, len);
+}
+
+/* Set the ratio rate to 115200, 8n1, IRQ disabled */
+static void max3110_write_config(void)
+{
+	u16 config;
+
+	config = 0xc001;
+	dw_writel(pspi, dr, config);
+}
+
+/* Translate char to a eligible word and send to max3110 */
+static void max3110_write_data(char c)
+{
+	u16 data;
+
+	data = 0x8000 | c;
+	dw_writel(pspi, dr, data);
+}
+
+void mrst_early_console_init(void)
+{
+	u32 ctrlr0 = 0;
+	u32 spi0_cdiv;
+	u32 freq; /* Freqency info only need be searched once */
+
+	/* Base clk is 100 MHz, the actual clk = 100M / (clk_divider + 1) */
+	pclk_spi0 = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
+							MRST_CLK_SPI0_REG);
+	spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9;
+	freq = 100000000 / (spi0_cdiv + 1);
+
+	if (mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL)
+		mrst_spi_paddr = MRST_REGBASE_SPI1;
+
+	pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
+						mrst_spi_paddr);
+
+	/* Disable SPI controller */
+	dw_writel(pspi, ssienr, 0);
+
+	/* Set control param, 8 bits, transmit only mode */
+	ctrlr0 = dw_readl(pspi, ctrl0);
+
+	ctrlr0 &= 0xfcc0;
+	ctrlr0 |= 0xf | (SPI_FRF_SPI << SPI_FRF_OFFSET)
+		      | (SPI_TMOD_TO << SPI_TMOD_OFFSET);
+	dw_writel(pspi, ctrl0, ctrlr0);
+
+	/*
+	 * Change the spi0 clk to comply with 115200 bps, use 100000 to
+	 * calculate the clk dividor to make the clock a little slower
+	 * than real baud rate.
+	 */
+	dw_writel(pspi, baudr, freq/100000);
+
+	/* Disable all INT for early phase */
+	dw_writel(pspi, imr, 0x0);
+
+	/* Set the cs to spi-uart */
+	dw_writel(pspi, ser, 0x2);
+
+	/* Enable the HW, the last step for HW init */
+	dw_writel(pspi, ssienr, 0x1);
+
+	/* Set the default configuration */
+	max3110_write_config();
+
+	/* Register the kmsg dumper */
+	if (!dumper_registered) {
+		dw_dumper.dump = dw_kmsg_dump;
+		kmsg_dump_register(&dw_dumper);
+		dumper_registered = 1;
+	}
+}
+
+/* Slave select should be called in the read/write function */
+static void early_mrst_spi_putc(char c)
+{
+	unsigned int timeout;
+	u32 sr;
+
+	timeout = MRST_SPI_TIMEOUT;
+	/* Early putc needs to make sure the TX FIFO is not full */
+	while (--timeout) {
+		sr = dw_readl(pspi, sr);
+		if (!(sr & SR_TF_NOT_FULL))
+			cpu_relax();
+		else
+			break;
+	}
+
+	if (!timeout)
+		pr_warn("MRST earlycon: timed out\n");
+	else
+		max3110_write_data(c);
+}
+
+/* Early SPI only uses polling mode */
+static void early_mrst_spi_write(struct console *con, const char *str,
+					unsigned n)
+{
+	int i;
+
+	for (i = 0; i < n && *str; i++) {
+		if (*str == '\n')
+			early_mrst_spi_putc('\r');
+		early_mrst_spi_putc(*str);
+		str++;
+	}
+}
+
+struct console early_mrst_console = {
+	.name =		"earlymrst",
+	.write =	early_mrst_spi_write,
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+};
+
+/*
+ * Following is the early console based on Medfield HSU (High
+ * Speed UART) device.
+ */
+#define HSU_PORT_BASE		0xffa28080
+
+static void __iomem *phsu;
+
+void hsu_early_console_init(const char *s)
+{
+	unsigned long paddr, port = 0;
+	u8 lcr;
+
+	/*
+	 * Select the early HSU console port if specified by user in the
+	 * kernel command line.
+	 */
+	if (*s && !kstrtoul(s, 10, &port))
+		port = clamp_val(port, 0, 2);
+
+	paddr = HSU_PORT_BASE + port * 0x80;
+	phsu = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, paddr);
+
+	/* Disable FIFO */
+	writeb(0x0, phsu + UART_FCR);
+
+	/* Set to default 115200 bps, 8n1 */
+	lcr = readb(phsu + UART_LCR);
+	writeb((0x80 | lcr), phsu + UART_LCR);
+	writeb(0x18, phsu + UART_DLL);
+	writeb(lcr,  phsu + UART_LCR);
+	writel(0x3600, phsu + UART_MUL*4);
+
+	writeb(0x8, phsu + UART_MCR);
+	writeb(0x7, phsu + UART_FCR);
+	writeb(0x3, phsu + UART_LCR);
+
+	/* Clear IRQ status */
+	readb(phsu + UART_LSR);
+	readb(phsu + UART_RX);
+	readb(phsu + UART_IIR);
+	readb(phsu + UART_MSR);
+
+	/* Enable FIFO */
+	writeb(0x7, phsu + UART_FCR);
+}
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+static void early_hsu_putc(char ch)
+{
+	unsigned int timeout = 10000; /* 10ms */
+	u8 status;
+
+	while (--timeout) {
+		status = readb(phsu + UART_LSR);
+		if (status & BOTH_EMPTY)
+			break;
+		udelay(1);
+	}
+
+	/* Only write the char when there was no timeout */
+	if (timeout)
+		writeb(ch, phsu + UART_TX);
+}
+
+static void early_hsu_write(struct console *con, const char *str, unsigned n)
+{
+	int i;
+
+	for (i = 0; i < n && *str; i++) {
+		if (*str == '\n')
+			early_hsu_putc('\r');
+		early_hsu_putc(*str);
+		str++;
+	}
+}
+
+struct console early_hsu_console = {
+	.name =		"earlyhsu",
+	.write =	early_hsu_write,
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+};
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
new file mode 100644
index 000000000000..7e6d7b204a05
--- /dev/null
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -0,0 +1,1055 @@
+/*
+ * intel-mid.c: Intel MID platform setup code
+ *
+ * (C) Copyright 2008, 2012 Intel Corporation
+ * Author: Jacob Pan (jacob.jun.pan@intel.com)
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#define pr_fmt(fmt) "mrst: " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/sfi.h>
+#include <linux/intel_pmic_gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/pca953x.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/mfd/intel_msic.h>
+#include <linux/gpio.h>
+#include <linux/i2c/tc35876x.h>
+
+#include <asm/setup.h>
+#include <asm/mpspec_def.h>
+#include <asm/hw_irq.h>
+#include <asm/apic.h>
+#include <asm/io_apic.h>
+#include <asm/intel-mid.h>
+#include <asm/intel_mid_vrtc.h>
+#include <asm/io.h>
+#include <asm/i8259.h>
+#include <asm/intel_scu_ipc.h>
+#include <asm/apb_timer.h>
+#include <asm/reboot.h>
+
+/*
+ * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock,
+ * cmdline option x86_mrst_timer can be used to override the configuration
+ * to prefer one or the other.
+ * at runtime, there are basically three timer configurations:
+ * 1. per cpu apbt clock only
+ * 2. per cpu always-on lapic clocks only, this is Penwell/Medfield only
+ * 3. per cpu lapic clock (C3STOP) and one apbt clock, with broadcast.
+ *
+ * by default (without cmdline option), platform code first detects cpu type
+ * to see if we are on lincroft or penwell, then set up both lapic or apbt
+ * clocks accordingly.
+ * i.e. by default, medfield uses configuration #2, moorestown uses #1.
+ * config #3 is supported but not recommended on medfield.
+ *
+ * rating and feature summary:
+ * lapic (with C3STOP) --------- 100
+ * apbt (always-on) ------------ 110
+ * lapic (always-on,ARAT) ------ 150
+ */
+
+enum mrst_timer_options mrst_timer_options;
+
+static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
+static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
+enum mrst_cpu_type __mrst_cpu_chip;
+EXPORT_SYMBOL_GPL(__mrst_cpu_chip);
+
+int sfi_mtimer_num;
+
+struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
+EXPORT_SYMBOL_GPL(sfi_mrtc_array);
+int sfi_mrtc_num;
+
+static void mrst_power_off(void)
+{
+}
+
+static void mrst_reboot(void)
+{
+	intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
+}
+
+/* parse all the mtimer info to a static mtimer array */
+static int __init sfi_parse_mtmr(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+	struct sfi_timer_table_entry *pentry;
+	struct mpc_intsrc mp_irq;
+	int totallen;
+
+	sb = (struct sfi_table_simple *)table;
+	if (!sfi_mtimer_num) {
+		sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb,
+					struct sfi_timer_table_entry);
+		pentry = (struct sfi_timer_table_entry *) sb->pentry;
+		totallen = sfi_mtimer_num * sizeof(*pentry);
+		memcpy(sfi_mtimer_array, pentry, totallen);
+	}
+
+	pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num);
+	pentry = sfi_mtimer_array;
+	for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) {
+		pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz,"
+			" irq = %d\n", totallen, (u32)pentry->phys_addr,
+			pentry->freq_hz, pentry->irq);
+			if (!pentry->irq)
+				continue;
+			mp_irq.type = MP_INTSRC;
+			mp_irq.irqtype = mp_INT;
+/* triggering mode edge bit 2-3, active high polarity bit 0-1 */
+			mp_irq.irqflag = 5;
+			mp_irq.srcbus = MP_BUS_ISA;
+			mp_irq.srcbusirq = pentry->irq;	/* IRQ */
+			mp_irq.dstapic = MP_APIC_ALL;
+			mp_irq.dstirq = pentry->irq;
+			mp_save_irq(&mp_irq);
+	}
+
+	return 0;
+}
+
+struct sfi_timer_table_entry *sfi_get_mtmr(int hint)
+{
+	int i;
+	if (hint < sfi_mtimer_num) {
+		if (!sfi_mtimer_usage[hint]) {
+			pr_debug("hint taken for timer %d irq %d\n",
+				hint, sfi_mtimer_array[hint].irq);
+			sfi_mtimer_usage[hint] = 1;
+			return &sfi_mtimer_array[hint];
+		}
+	}
+	/* take the first timer available */
+	for (i = 0; i < sfi_mtimer_num;) {
+		if (!sfi_mtimer_usage[i]) {
+			sfi_mtimer_usage[i] = 1;
+			return &sfi_mtimer_array[i];
+		}
+		i++;
+	}
+	return NULL;
+}
+
+void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr)
+{
+	int i;
+	for (i = 0; i < sfi_mtimer_num;) {
+		if (mtmr->irq == sfi_mtimer_array[i].irq) {
+			sfi_mtimer_usage[i] = 0;
+			return;
+		}
+		i++;
+	}
+}
+
+/* parse all the mrtc info to a global mrtc array */
+int __init sfi_parse_mrtc(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+	struct sfi_rtc_table_entry *pentry;
+	struct mpc_intsrc mp_irq;
+
+	int totallen;
+
+	sb = (struct sfi_table_simple *)table;
+	if (!sfi_mrtc_num) {
+		sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb,
+						struct sfi_rtc_table_entry);
+		pentry = (struct sfi_rtc_table_entry *)sb->pentry;
+		totallen = sfi_mrtc_num * sizeof(*pentry);
+		memcpy(sfi_mrtc_array, pentry, totallen);
+	}
+
+	pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num);
+	pentry = sfi_mrtc_array;
+	for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) {
+		pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n",
+			totallen, (u32)pentry->phys_addr, pentry->irq);
+		mp_irq.type = MP_INTSRC;
+		mp_irq.irqtype = mp_INT;
+		mp_irq.irqflag = 0xf;	/* level trigger and active low */
+		mp_irq.srcbus = MP_BUS_ISA;
+		mp_irq.srcbusirq = pentry->irq;	/* IRQ */
+		mp_irq.dstapic = MP_APIC_ALL;
+		mp_irq.dstirq = pentry->irq;
+		mp_save_irq(&mp_irq);
+	}
+	return 0;
+}
+
+static unsigned long __init mrst_calibrate_tsc(void)
+{
+	unsigned long fast_calibrate;
+	u32 lo, hi, ratio, fsb;
+
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi);
+	ratio = (hi >> 8) & 0x1f;
+	pr_debug("ratio is %d\n", ratio);
+	if (!ratio) {
+		pr_err("read a zero ratio, should be incorrect!\n");
+		pr_err("force tsc ratio to 16 ...\n");
+		ratio = 16;
+	}
+	rdmsr(MSR_FSB_FREQ, lo, hi);
+	if ((lo & 0x7) == 0x7)
+		fsb = PENWELL_FSB_FREQ_83SKU;
+	else
+		fsb = PENWELL_FSB_FREQ_100SKU;
+	fast_calibrate = ratio * fsb;
+	pr_debug("read penwell tsc %lu khz\n", fast_calibrate);
+	lapic_timer_frequency = fsb * 1000 / HZ;
+	/* mark tsc clocksource as reliable */
+	set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
+
+	if (fast_calibrate)
+		return fast_calibrate;
+
+	return 0;
+}
+
+static void __init mrst_time_init(void)
+{
+	sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
+	switch (mrst_timer_options) {
+	case MRST_TIMER_APBT_ONLY:
+		break;
+	case MRST_TIMER_LAPIC_APBT:
+		x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
+		x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
+		break;
+	default:
+		if (!boot_cpu_has(X86_FEATURE_ARAT))
+			break;
+		x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
+		x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
+		return;
+	}
+	/* we need at least one APB timer */
+	pre_init_apic_IRQ0();
+	apbt_time_init();
+}
+
+static void mrst_arch_setup(void)
+{
+	if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
+		__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
+	else {
+		pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n",
+			boot_cpu_data.x86, boot_cpu_data.x86_model);
+		__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
+	}
+}
+
+/* MID systems don't have i8042 controller */
+static int mrst_i8042_detect(void)
+{
+	return 0;
+}
+
+/*
+ * Moorestown does not have external NMI source nor port 0x61 to report
+ * NMI status. The possible NMI sources are from pmu as a result of NMI
+ * watchdog or lock debug. Reading io port 0x61 results in 0xff which
+ * misled NMI handler.
+ */
+static unsigned char mrst_get_nmi_reason(void)
+{
+	return 0;
+}
+
+/*
+ * Moorestown specific x86_init function overrides and early setup
+ * calls.
+ */
+void __init x86_mrst_early_setup(void)
+{
+	x86_init.resources.probe_roms = x86_init_noop;
+	x86_init.resources.reserve_resources = x86_init_noop;
+
+	x86_init.timers.timer_init = mrst_time_init;
+	x86_init.timers.setup_percpu_clockev = x86_init_noop;
+
+	x86_init.irqs.pre_vector_init = x86_init_noop;
+
+	x86_init.oem.arch_setup = mrst_arch_setup;
+
+	x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock;
+
+	x86_platform.calibrate_tsc = mrst_calibrate_tsc;
+	x86_platform.i8042_detect = mrst_i8042_detect;
+	x86_init.timers.wallclock_init = mrst_rtc_init;
+	x86_platform.get_nmi_reason = mrst_get_nmi_reason;
+
+	x86_init.pci.init = pci_mrst_init;
+	x86_init.pci.fixup_irqs = x86_init_noop;
+
+	legacy_pic = &null_legacy_pic;
+
+	/* Moorestown specific power_off/restart method */
+	pm_power_off = mrst_power_off;
+	machine_ops.emergency_restart  = mrst_reboot;
+
+	/* Avoid searching for BIOS MP tables */
+	x86_init.mpparse.find_smp_config = x86_init_noop;
+	x86_init.mpparse.get_smp_config = x86_init_uint_noop;
+	set_bit(MP_BUS_ISA, mp_bus_not_pci);
+}
+
+/*
+ * if user does not want to use per CPU apb timer, just give it a lower rating
+ * than local apic timer and skip the late per cpu timer init.
+ */
+static inline int __init setup_x86_mrst_timer(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	if (strcmp("apbt_only", arg) == 0)
+		mrst_timer_options = MRST_TIMER_APBT_ONLY;
+	else if (strcmp("lapic_and_apbt", arg) == 0)
+		mrst_timer_options = MRST_TIMER_LAPIC_APBT;
+	else {
+		pr_warn("X86 MRST timer option %s not recognised"
+			   " use x86_mrst_timer=apbt_only or lapic_and_apbt\n",
+			   arg);
+		return -EINVAL;
+	}
+	return 0;
+}
+__setup("x86_mrst_timer=", setup_x86_mrst_timer);
+
+/*
+ * Parsing GPIO table first, since the DEVS table will need this table
+ * to map the pin name to the actual pin.
+ */
+static struct sfi_gpio_table_entry *gpio_table;
+static int gpio_num_entry;
+
+static int __init sfi_parse_gpio(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+	struct sfi_gpio_table_entry *pentry;
+	int num, i;
+
+	if (gpio_table)
+		return 0;
+	sb = (struct sfi_table_simple *)table;
+	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry);
+	pentry = (struct sfi_gpio_table_entry *)sb->pentry;
+
+	gpio_table = kmalloc(num * sizeof(*pentry), GFP_KERNEL);
+	if (!gpio_table)
+		return -1;
+	memcpy(gpio_table, pentry, num * sizeof(*pentry));
+	gpio_num_entry = num;
+
+	pr_debug("GPIO pin info:\n");
+	for (i = 0; i < num; i++, pentry++)
+		pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s,"
+		" pin = %d\n", i,
+			pentry->controller_name,
+			pentry->pin_name,
+			pentry->pin_no);
+	return 0;
+}
+
+static int get_gpio_by_name(const char *name)
+{
+	struct sfi_gpio_table_entry *pentry = gpio_table;
+	int i;
+
+	if (!pentry)
+		return -1;
+	for (i = 0; i < gpio_num_entry; i++, pentry++) {
+		if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN))
+			return pentry->pin_no;
+	}
+	return -1;
+}
+
+/*
+ * Here defines the array of devices platform data that IAFW would export
+ * through SFI "DEVS" table, we use name and type to match the device and
+ * its platform data.
+ */
+struct devs_id {
+	char name[SFI_NAME_LEN + 1];
+	u8 type;
+	u8 delay;
+	void *(*get_platform_data)(void *info);
+};
+
+/* the offset for the mapping of global gpio pin to irq */
+#define MRST_IRQ_OFFSET 0x100
+
+static void __init *pmic_gpio_platform_data(void *info)
+{
+	static struct intel_pmic_gpio_platform_data pmic_gpio_pdata;
+	int gpio_base = get_gpio_by_name("pmic_gpio_base");
+
+	if (gpio_base == -1)
+		gpio_base = 64;
+	pmic_gpio_pdata.gpio_base = gpio_base;
+	pmic_gpio_pdata.irq_base = gpio_base + MRST_IRQ_OFFSET;
+	pmic_gpio_pdata.gpiointr = 0xffffeff8;
+
+	return &pmic_gpio_pdata;
+}
+
+static void __init *max3111_platform_data(void *info)
+{
+	struct spi_board_info *spi_info = info;
+	int intr = get_gpio_by_name("max3111_int");
+
+	spi_info->mode = SPI_MODE_0;
+	if (intr == -1)
+		return NULL;
+	spi_info->irq = intr + MRST_IRQ_OFFSET;
+	return NULL;
+}
+
+/* we have multiple max7315 on the board ... */
+#define MAX7315_NUM 2
+static void __init *max7315_platform_data(void *info)
+{
+	static struct pca953x_platform_data max7315_pdata[MAX7315_NUM];
+	static int nr;
+	struct pca953x_platform_data *max7315 = &max7315_pdata[nr];
+	struct i2c_board_info *i2c_info = info;
+	int gpio_base, intr;
+	char base_pin_name[SFI_NAME_LEN + 1];
+	char intr_pin_name[SFI_NAME_LEN + 1];
+
+	if (nr == MAX7315_NUM) {
+		pr_err("too many max7315s, we only support %d\n",
+				MAX7315_NUM);
+		return NULL;
+	}
+	/* we have several max7315 on the board, we only need load several
+	 * instances of the same pca953x driver to cover them
+	 */
+	strcpy(i2c_info->type, "max7315");
+	if (nr++) {
+		sprintf(base_pin_name, "max7315_%d_base", nr);
+		sprintf(intr_pin_name, "max7315_%d_int", nr);
+	} else {
+		strcpy(base_pin_name, "max7315_base");
+		strcpy(intr_pin_name, "max7315_int");
+	}
+
+	gpio_base = get_gpio_by_name(base_pin_name);
+	intr = get_gpio_by_name(intr_pin_name);
+
+	if (gpio_base == -1)
+		return NULL;
+	max7315->gpio_base = gpio_base;
+	if (intr != -1) {
+		i2c_info->irq = intr + MRST_IRQ_OFFSET;
+		max7315->irq_base = gpio_base + MRST_IRQ_OFFSET;
+	} else {
+		i2c_info->irq = -1;
+		max7315->irq_base = -1;
+	}
+	return max7315;
+}
+
+static void *tca6416_platform_data(void *info)
+{
+	static struct pca953x_platform_data tca6416;
+	struct i2c_board_info *i2c_info = info;
+	int gpio_base, intr;
+	char base_pin_name[SFI_NAME_LEN + 1];
+	char intr_pin_name[SFI_NAME_LEN + 1];
+
+	strcpy(i2c_info->type, "tca6416");
+	strcpy(base_pin_name, "tca6416_base");
+	strcpy(intr_pin_name, "tca6416_int");
+
+	gpio_base = get_gpio_by_name(base_pin_name);
+	intr = get_gpio_by_name(intr_pin_name);
+
+	if (gpio_base == -1)
+		return NULL;
+	tca6416.gpio_base = gpio_base;
+	if (intr != -1) {
+		i2c_info->irq = intr + MRST_IRQ_OFFSET;
+		tca6416.irq_base = gpio_base + MRST_IRQ_OFFSET;
+	} else {
+		i2c_info->irq = -1;
+		tca6416.irq_base = -1;
+	}
+	return &tca6416;
+}
+
+static void *mpu3050_platform_data(void *info)
+{
+	struct i2c_board_info *i2c_info = info;
+	int intr = get_gpio_by_name("mpu3050_int");
+
+	if (intr == -1)
+		return NULL;
+
+	i2c_info->irq = intr + MRST_IRQ_OFFSET;
+	return NULL;
+}
+
+static void __init *emc1403_platform_data(void *info)
+{
+	static short intr2nd_pdata;
+	struct i2c_board_info *i2c_info = info;
+	int intr = get_gpio_by_name("thermal_int");
+	int intr2nd = get_gpio_by_name("thermal_alert");
+
+	if (intr == -1 || intr2nd == -1)
+		return NULL;
+
+	i2c_info->irq = intr + MRST_IRQ_OFFSET;
+	intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
+
+	return &intr2nd_pdata;
+}
+
+static void __init *lis331dl_platform_data(void *info)
+{
+	static short intr2nd_pdata;
+	struct i2c_board_info *i2c_info = info;
+	int intr = get_gpio_by_name("accel_int");
+	int intr2nd = get_gpio_by_name("accel_2");
+
+	if (intr == -1 || intr2nd == -1)
+		return NULL;
+
+	i2c_info->irq = intr + MRST_IRQ_OFFSET;
+	intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
+
+	return &intr2nd_pdata;
+}
+
+static void __init *no_platform_data(void *info)
+{
+	return NULL;
+}
+
+static struct resource msic_resources[] = {
+	{
+		.start	= INTEL_MSIC_IRQ_PHYS_BASE,
+		.end	= INTEL_MSIC_IRQ_PHYS_BASE + 64 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct intel_msic_platform_data msic_pdata;
+
+static struct platform_device msic_device = {
+	.name		= "intel_msic",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &msic_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(msic_resources),
+	.resource	= msic_resources,
+};
+
+static inline bool mrst_has_msic(void)
+{
+	return mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL;
+}
+
+static int msic_scu_status_change(struct notifier_block *nb,
+				  unsigned long code, void *data)
+{
+	if (code == SCU_DOWN) {
+		platform_device_unregister(&msic_device);
+		return 0;
+	}
+
+	return platform_device_register(&msic_device);
+}
+
+static int __init msic_init(void)
+{
+	static struct notifier_block msic_scu_notifier = {
+		.notifier_call	= msic_scu_status_change,
+	};
+
+	/*
+	 * We need to be sure that the SCU IPC is ready before MSIC device
+	 * can be registered.
+	 */
+	if (mrst_has_msic())
+		intel_scu_notifier_add(&msic_scu_notifier);
+
+	return 0;
+}
+arch_initcall(msic_init);
+
+/*
+ * msic_generic_platform_data - sets generic platform data for the block
+ * @info: pointer to the SFI device table entry for this block
+ * @block: MSIC block
+ *
+ * Function sets IRQ number from the SFI table entry for given device to
+ * the MSIC platform data.
+ */
+static void *msic_generic_platform_data(void *info, enum intel_msic_block block)
+{
+	struct sfi_device_table_entry *entry = info;
+
+	BUG_ON(block < 0 || block >= INTEL_MSIC_BLOCK_LAST);
+	msic_pdata.irq[block] = entry->irq;
+
+	return no_platform_data(info);
+}
+
+static void *msic_battery_platform_data(void *info)
+{
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_BATTERY);
+}
+
+static void *msic_gpio_platform_data(void *info)
+{
+	static struct intel_msic_gpio_pdata pdata;
+	int gpio = get_gpio_by_name("msic_gpio_base");
+
+	if (gpio < 0)
+		return NULL;
+
+	pdata.gpio_base = gpio;
+	msic_pdata.gpio = &pdata;
+
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_GPIO);
+}
+
+static void *msic_audio_platform_data(void *info)
+{
+	struct platform_device *pdev;
+
+	pdev = platform_device_register_simple("sst-platform", -1, NULL, 0);
+	if (IS_ERR(pdev)) {
+		pr_err("failed to create audio platform device\n");
+		return NULL;
+	}
+
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_AUDIO);
+}
+
+static void *msic_power_btn_platform_data(void *info)
+{
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN);
+}
+
+static void *msic_ocd_platform_data(void *info)
+{
+	static struct intel_msic_ocd_pdata pdata;
+	int gpio = get_gpio_by_name("ocd_gpio");
+
+	if (gpio < 0)
+		return NULL;
+
+	pdata.gpio = gpio;
+	msic_pdata.ocd = &pdata;
+
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD);
+}
+
+static void *msic_thermal_platform_data(void *info)
+{
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_THERMAL);
+}
+
+/* tc35876x DSI-LVDS bridge chip and panel platform data */
+static void *tc35876x_platform_data(void *data)
+{
+	static struct tc35876x_platform_data pdata;
+
+	/* gpio pins set to -1 will not be used by the driver */
+	pdata.gpio_bridge_reset = get_gpio_by_name("LCMB_RXEN");
+	pdata.gpio_panel_bl_en = get_gpio_by_name("6S6P_BL_EN");
+	pdata.gpio_panel_vadd = get_gpio_by_name("EN_VREG_LCD_V3P3");
+
+	return &pdata;
+}
+
+static const struct devs_id __initconst device_ids[] = {
+	{"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data},
+	{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
+	{"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data},
+	{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
+	{"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
+	{"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
+	{"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data},
+	{"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data},
+	{"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data},
+	{"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
+	{"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data},
+	{"i2c_disp_brig", SFI_DEV_TYPE_I2C, 0, &tc35876x_platform_data},
+
+	/* MSIC subdevices */
+	{"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data},
+	{"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data},
+	{"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data},
+	{"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data},
+	{"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data},
+	{"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data},
+
+	{},
+};
+
+#define MAX_IPCDEVS	24
+static struct platform_device *ipc_devs[MAX_IPCDEVS];
+static int ipc_next_dev;
+
+#define MAX_SCU_SPI	24
+static struct spi_board_info *spi_devs[MAX_SCU_SPI];
+static int spi_next_dev;
+
+#define MAX_SCU_I2C	24
+static struct i2c_board_info *i2c_devs[MAX_SCU_I2C];
+static int i2c_bus[MAX_SCU_I2C];
+static int i2c_next_dev;
+
+static void __init intel_scu_device_register(struct platform_device *pdev)
+{
+	if (ipc_next_dev == MAX_IPCDEVS)
+		pr_err("too many SCU IPC devices");
+	else
+		ipc_devs[ipc_next_dev++] = pdev;
+}
+
+static void __init intel_scu_spi_device_register(struct spi_board_info *sdev)
+{
+	struct spi_board_info *new_dev;
+
+	if (spi_next_dev == MAX_SCU_SPI) {
+		pr_err("too many SCU SPI devices");
+		return;
+	}
+
+	new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL);
+	if (!new_dev) {
+		pr_err("failed to alloc mem for delayed spi dev %s\n",
+			sdev->modalias);
+		return;
+	}
+	memcpy(new_dev, sdev, sizeof(*sdev));
+
+	spi_devs[spi_next_dev++] = new_dev;
+}
+
+static void __init intel_scu_i2c_device_register(int bus,
+						struct i2c_board_info *idev)
+{
+	struct i2c_board_info *new_dev;
+
+	if (i2c_next_dev == MAX_SCU_I2C) {
+		pr_err("too many SCU I2C devices");
+		return;
+	}
+
+	new_dev = kzalloc(sizeof(*idev), GFP_KERNEL);
+	if (!new_dev) {
+		pr_err("failed to alloc mem for delayed i2c dev %s\n",
+			idev->type);
+		return;
+	}
+	memcpy(new_dev, idev, sizeof(*idev));
+
+	i2c_bus[i2c_next_dev] = bus;
+	i2c_devs[i2c_next_dev++] = new_dev;
+}
+
+BLOCKING_NOTIFIER_HEAD(intel_scu_notifier);
+EXPORT_SYMBOL_GPL(intel_scu_notifier);
+
+/* Called by IPC driver */
+void intel_scu_devices_create(void)
+{
+	int i;
+
+	for (i = 0; i < ipc_next_dev; i++)
+		platform_device_add(ipc_devs[i]);
+
+	for (i = 0; i < spi_next_dev; i++)
+		spi_register_board_info(spi_devs[i], 1);
+
+	for (i = 0; i < i2c_next_dev; i++) {
+		struct i2c_adapter *adapter;
+		struct i2c_client *client;
+
+		adapter = i2c_get_adapter(i2c_bus[i]);
+		if (adapter) {
+			client = i2c_new_device(adapter, i2c_devs[i]);
+			if (!client)
+				pr_err("can't create i2c device %s\n",
+					i2c_devs[i]->type);
+		} else
+			i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
+	}
+	intel_scu_notifier_post(SCU_AVAILABLE, NULL);
+}
+EXPORT_SYMBOL_GPL(intel_scu_devices_create);
+
+/* Called by IPC driver */
+void intel_scu_devices_destroy(void)
+{
+	int i;
+
+	intel_scu_notifier_post(SCU_DOWN, NULL);
+
+	for (i = 0; i < ipc_next_dev; i++)
+		platform_device_del(ipc_devs[i]);
+}
+EXPORT_SYMBOL_GPL(intel_scu_devices_destroy);
+
+static void __init install_irq_resource(struct platform_device *pdev, int irq)
+{
+	/* Single threaded */
+	static struct resource __initdata res = {
+		.name = "IRQ",
+		.flags = IORESOURCE_IRQ,
+	};
+	res.start = irq;
+	platform_device_add_resources(pdev, &res, 1);
+}
+
+static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *entry)
+{
+	const struct devs_id *dev = device_ids;
+	struct platform_device *pdev;
+	void *pdata = NULL;
+
+	while (dev->name[0]) {
+		if (dev->type == SFI_DEV_TYPE_IPC &&
+			!strncmp(dev->name, entry->name, SFI_NAME_LEN)) {
+			pdata = dev->get_platform_data(entry);
+			break;
+		}
+		dev++;
+	}
+
+	/*
+	 * On Medfield the platform device creation is handled by the MSIC
+	 * MFD driver so we don't need to do it here.
+	 */
+	if (mrst_has_msic())
+		return;
+
+	pdev = platform_device_alloc(entry->name, 0);
+	if (pdev == NULL) {
+		pr_err("out of memory for SFI platform device '%s'.\n",
+			entry->name);
+		return;
+	}
+	install_irq_resource(pdev, entry->irq);
+
+	pdev->dev.platform_data = pdata;
+	intel_scu_device_register(pdev);
+}
+
+static void __init sfi_handle_spi_dev(struct spi_board_info *spi_info)
+{
+	const struct devs_id *dev = device_ids;
+	void *pdata = NULL;
+
+	while (dev->name[0]) {
+		if (dev->type == SFI_DEV_TYPE_SPI &&
+			!strncmp(dev->name, spi_info->modalias,
+						SFI_NAME_LEN)) {
+			pdata = dev->get_platform_data(spi_info);
+			break;
+		}
+		dev++;
+	}
+	spi_info->platform_data = pdata;
+	if (dev->delay)
+		intel_scu_spi_device_register(spi_info);
+	else
+		spi_register_board_info(spi_info, 1);
+}
+
+static void __init sfi_handle_i2c_dev(int bus, struct i2c_board_info *i2c_info)
+{
+	const struct devs_id *dev = device_ids;
+	void *pdata = NULL;
+
+	while (dev->name[0]) {
+		if (dev->type == SFI_DEV_TYPE_I2C &&
+			!strncmp(dev->name, i2c_info->type, SFI_NAME_LEN)) {
+			pdata = dev->get_platform_data(i2c_info);
+			break;
+		}
+		dev++;
+	}
+	i2c_info->platform_data = pdata;
+
+	if (dev->delay)
+		intel_scu_i2c_device_register(bus, i2c_info);
+	else
+		i2c_register_board_info(bus, i2c_info, 1);
+}
+
+
+static int __init sfi_parse_devs(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+	struct sfi_device_table_entry *pentry;
+	struct spi_board_info spi_info;
+	struct i2c_board_info i2c_info;
+	int num, i, bus;
+	int ioapic;
+	struct io_apic_irq_attr irq_attr;
+
+	sb = (struct sfi_table_simple *)table;
+	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
+	pentry = (struct sfi_device_table_entry *)sb->pentry;
+
+	for (i = 0; i < num; i++, pentry++) {
+		int irq = pentry->irq;
+
+		if (irq != (u8)0xff) { /* native RTE case */
+			/* these SPI2 devices are not exposed to system as PCI
+			 * devices, but they have separate RTE entry in IOAPIC
+			 * so we have to enable them one by one here
+			 */
+			ioapic = mp_find_ioapic(irq);
+			irq_attr.ioapic = ioapic;
+			irq_attr.ioapic_pin = irq;
+			irq_attr.trigger = 1;
+			irq_attr.polarity = 1;
+			io_apic_set_pci_routing(NULL, irq, &irq_attr);
+		} else
+			irq = 0; /* No irq */
+
+		switch (pentry->type) {
+		case SFI_DEV_TYPE_IPC:
+			pr_debug("info[%2d]: IPC bus, name = %16.16s, "
+				"irq = 0x%2x\n", i, pentry->name, pentry->irq);
+			sfi_handle_ipc_dev(pentry);
+			break;
+		case SFI_DEV_TYPE_SPI:
+			memset(&spi_info, 0, sizeof(spi_info));
+			strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
+			spi_info.irq = irq;
+			spi_info.bus_num = pentry->host_num;
+			spi_info.chip_select = pentry->addr;
+			spi_info.max_speed_hz = pentry->max_freq;
+			pr_debug("info[%2d]: SPI bus = %d, name = %16.16s, "
+				"irq = 0x%2x, max_freq = %d, cs = %d\n", i,
+				spi_info.bus_num,
+				spi_info.modalias,
+				spi_info.irq,
+				spi_info.max_speed_hz,
+				spi_info.chip_select);
+			sfi_handle_spi_dev(&spi_info);
+			break;
+		case SFI_DEV_TYPE_I2C:
+			memset(&i2c_info, 0, sizeof(i2c_info));
+			bus = pentry->host_num;
+			strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
+			i2c_info.irq = irq;
+			i2c_info.addr = pentry->addr;
+			pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, "
+				"irq = 0x%2x, addr = 0x%x\n", i, bus,
+				i2c_info.type,
+				i2c_info.irq,
+				i2c_info.addr);
+			sfi_handle_i2c_dev(bus, &i2c_info);
+			break;
+		case SFI_DEV_TYPE_UART:
+		case SFI_DEV_TYPE_HSI:
+		default:
+			;
+		}
+	}
+	return 0;
+}
+
+static int __init mrst_platform_init(void)
+{
+	sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
+	sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
+	return 0;
+}
+arch_initcall(mrst_platform_init);
+
+/*
+ * we will search these buttons in SFI GPIO table (by name)
+ * and register them dynamically. Please add all possible
+ * buttons here, we will shrink them if no GPIO found.
+ */
+static struct gpio_keys_button gpio_button[] = {
+	{KEY_POWER,		-1, 1, "power_btn",	EV_KEY, 0, 3000},
+	{KEY_PROG1,		-1, 1, "prog_btn1",	EV_KEY, 0, 20},
+	{KEY_PROG2,		-1, 1, "prog_btn2",	EV_KEY, 0, 20},
+	{SW_LID,		-1, 1, "lid_switch",	EV_SW,  0, 20},
+	{KEY_VOLUMEUP,		-1, 1, "vol_up",	EV_KEY, 0, 20},
+	{KEY_VOLUMEDOWN,	-1, 1, "vol_down",	EV_KEY, 0, 20},
+	{KEY_CAMERA,		-1, 1, "camera_full",	EV_KEY, 0, 20},
+	{KEY_CAMERA_FOCUS,	-1, 1, "camera_half",	EV_KEY, 0, 20},
+	{SW_KEYPAD_SLIDE,	-1, 1, "MagSw1",	EV_SW,  0, 20},
+	{SW_KEYPAD_SLIDE,	-1, 1, "MagSw2",	EV_SW,  0, 20},
+};
+
+static struct gpio_keys_platform_data mrst_gpio_keys = {
+	.buttons	= gpio_button,
+	.rep		= 1,
+	.nbuttons	= -1, /* will fill it after search */
+};
+
+static struct platform_device pb_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &mrst_gpio_keys,
+	},
+};
+
+/*
+ * Shrink the non-existent buttons, register the gpio button
+ * device if there is some
+ */
+static int __init pb_keys_init(void)
+{
+	struct gpio_keys_button *gb = gpio_button;
+	int i, num, good = 0;
+
+	num = sizeof(gpio_button) / sizeof(struct gpio_keys_button);
+	for (i = 0; i < num; i++) {
+		gb[i].gpio = get_gpio_by_name(gb[i].desc);
+		pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc,
+					gb[i].gpio);
+		if (gb[i].gpio == -1)
+			continue;
+
+		if (i != good)
+			gb[good] = gb[i];
+		good++;
+	}
+
+	if (good) {
+		mrst_gpio_keys.nbuttons = good;
+		return platform_device_register(&pb_device);
+	}
+	return 0;
+}
+late_initcall(pb_keys_init);
diff --git a/arch/x86/platform/intel-mid/intel_mid_vrtc.c b/arch/x86/platform/intel-mid/intel_mid_vrtc.c
new file mode 100644
index 000000000000..ded9fbd81996
--- /dev/null
+++ b/arch/x86/platform/intel-mid/intel_mid_vrtc.c
@@ -0,0 +1,177 @@
+/*
+ * intel_mid_vrtc.c: Driver for virtual RTC device on Intel MID platform
+ *
+ * (C) Copyright 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * Note:
+ * VRTC is emulated by system controller firmware, the real HW
+ * RTC is located in the PMIC device. SCU FW shadows PMIC RTC
+ * in a memory mapped IO space that is visible to the host IA
+ * processor.
+ *
+ * This driver is based on RTC CMOS driver.
+ */
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/sfi.h>
+#include <linux/platform_device.h>
+
+#include <asm/intel-mid.h>
+#include <asm/intel_mid_vrtc.h>
+#include <asm/time.h>
+#include <asm/fixmap.h>
+
+static unsigned char __iomem *vrtc_virt_base;
+
+unsigned char vrtc_cmos_read(unsigned char reg)
+{
+	unsigned char retval;
+
+	/* vRTC's registers range from 0x0 to 0xD */
+	if (reg > 0xd || !vrtc_virt_base)
+		return 0xff;
+
+	lock_cmos_prefix(reg);
+	retval = __raw_readb(vrtc_virt_base + (reg << 2));
+	lock_cmos_suffix(reg);
+	return retval;
+}
+EXPORT_SYMBOL_GPL(vrtc_cmos_read);
+
+void vrtc_cmos_write(unsigned char val, unsigned char reg)
+{
+	if (reg > 0xd || !vrtc_virt_base)
+		return;
+
+	lock_cmos_prefix(reg);
+	__raw_writeb(val, vrtc_virt_base + (reg << 2));
+	lock_cmos_suffix(reg);
+}
+EXPORT_SYMBOL_GPL(vrtc_cmos_write);
+
+void vrtc_get_time(struct timespec *now)
+{
+	u8 sec, min, hour, mday, mon;
+	unsigned long flags;
+	u32 year;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+
+	while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP))
+		cpu_relax();
+
+	sec = vrtc_cmos_read(RTC_SECONDS);
+	min = vrtc_cmos_read(RTC_MINUTES);
+	hour = vrtc_cmos_read(RTC_HOURS);
+	mday = vrtc_cmos_read(RTC_DAY_OF_MONTH);
+	mon = vrtc_cmos_read(RTC_MONTH);
+	year = vrtc_cmos_read(RTC_YEAR);
+
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
+	/* vRTC YEAR reg contains the offset to 1972 */
+	year += 1972;
+
+	pr_info("vRTC: sec: %d min: %d hour: %d day: %d "
+		"mon: %d year: %d\n", sec, min, hour, mday, mon, year);
+
+	now->tv_sec = mktime(year, mon, mday, hour, min, sec);
+	now->tv_nsec = 0;
+}
+
+int vrtc_set_mmss(const struct timespec *now)
+{
+	unsigned long flags;
+	struct rtc_time tm;
+	int year;
+	int retval = 0;
+
+	rtc_time_to_tm(now->tv_sec, &tm);
+	if (!rtc_valid_tm(&tm) && tm.tm_year >= 72) {
+		/*
+		 * tm.year is the number of years since 1900, and the
+		 * vrtc need the years since 1972.
+		 */
+		year = tm.tm_year - 72;
+		spin_lock_irqsave(&rtc_lock, flags);
+		vrtc_cmos_write(year, RTC_YEAR);
+		vrtc_cmos_write(tm.tm_mon, RTC_MONTH);
+		vrtc_cmos_write(tm.tm_mday, RTC_DAY_OF_MONTH);
+		vrtc_cmos_write(tm.tm_hour, RTC_HOURS);
+		vrtc_cmos_write(tm.tm_min, RTC_MINUTES);
+		vrtc_cmos_write(tm.tm_sec, RTC_SECONDS);
+		spin_unlock_irqrestore(&rtc_lock, flags);
+	} else {
+		pr_err("%s: Invalid vRTC value: write of %lx to vRTC failed\n",
+			__FUNCTION__, now->tv_sec);
+		retval = -EINVAL;
+	}
+	return retval;
+}
+
+void __init mrst_rtc_init(void)
+{
+	unsigned long vrtc_paddr;
+
+	sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
+
+	vrtc_paddr = sfi_mrtc_array[0].phys_addr;
+	if (!sfi_mrtc_num || !vrtc_paddr)
+		return;
+
+	vrtc_virt_base = (void __iomem *)set_fixmap_offset_nocache(FIX_LNW_VRTC,
+								vrtc_paddr);
+	x86_platform.get_wallclock = vrtc_get_time;
+	x86_platform.set_wallclock = vrtc_set_mmss;
+}
+
+/*
+ * The Moorestown platform has a memory mapped virtual RTC device that emulates
+ * the programming interface of the RTC.
+ */
+
+static struct resource vrtc_resources[] = {
+	[0] = {
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device vrtc_device = {
+	.name		= "rtc_mrst",
+	.id		= -1,
+	.resource	= vrtc_resources,
+	.num_resources	= ARRAY_SIZE(vrtc_resources),
+};
+
+/* Register the RTC device if appropriate */
+static int __init mrst_device_create(void)
+{
+	/* No Moorestown, no device */
+	if (!mrst_identify_cpu())
+		return -ENODEV;
+	/* No timer, no device */
+	if (!sfi_mrtc_num)
+		return -ENODEV;
+
+	/* iomem resource */
+	vrtc_resources[0].start = sfi_mrtc_array[0].phys_addr;
+	vrtc_resources[0].end = sfi_mrtc_array[0].phys_addr +
+				MRST_VRTC_MAP_SZ;
+	/* irq resource */
+	vrtc_resources[1].start = sfi_mrtc_array[0].irq;
+	vrtc_resources[1].end = sfi_mrtc_array[0].irq;
+
+	return platform_device_register(&vrtc_device);
+}
+
+module_init(mrst_device_create);
diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile
deleted file mode 100644
index af1da7e623f9..000000000000
--- a/arch/x86/platform/mrst/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-$(CONFIG_X86_INTEL_MID)	+= mrst.o
-obj-$(CONFIG_X86_INTEL_MID)	+= vrtc.o
-obj-$(CONFIG_EARLY_PRINTK_INTEL_MID)	+= early_printk_mrst.o
diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c
deleted file mode 100644
index 39ecc276cd84..000000000000
--- a/arch/x86/platform/mrst/early_printk_mrst.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- * early_printk_mrst.c - early consoles for Intel MID platforms
- *
- * Copyright (c) 2008-2010, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-/*
- * This file implements two early consoles named mrst and hsu.
- * mrst is based on Maxim3110 spi-uart device, it exists in both
- * Moorestown and Medfield platforms, while hsu is based on a High
- * Speed UART device which only exists in the Medfield platform
- */
-
-#include <linux/serial_reg.h>
-#include <linux/serial_mfd.h>
-#include <linux/kmsg_dump.h>
-#include <linux/console.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/fixmap.h>
-#include <asm/pgtable.h>
-#include <asm/mrst.h>
-
-#define MRST_SPI_TIMEOUT		0x200000
-#define MRST_REGBASE_SPI0		0xff128000
-#define MRST_REGBASE_SPI1		0xff128400
-#define MRST_CLK_SPI0_REG		0xff11d86c
-
-/* Bit fields in CTRLR0 */
-#define SPI_DFS_OFFSET			0
-
-#define SPI_FRF_OFFSET			4
-#define SPI_FRF_SPI			0x0
-#define SPI_FRF_SSP			0x1
-#define SPI_FRF_MICROWIRE		0x2
-#define SPI_FRF_RESV			0x3
-
-#define SPI_MODE_OFFSET			6
-#define SPI_SCPH_OFFSET			6
-#define SPI_SCOL_OFFSET			7
-#define SPI_TMOD_OFFSET			8
-#define	SPI_TMOD_TR			0x0		/* xmit & recv */
-#define SPI_TMOD_TO			0x1		/* xmit only */
-#define SPI_TMOD_RO			0x2		/* recv only */
-#define SPI_TMOD_EPROMREAD		0x3		/* eeprom read mode */
-
-#define SPI_SLVOE_OFFSET		10
-#define SPI_SRL_OFFSET			11
-#define SPI_CFS_OFFSET			12
-
-/* Bit fields in SR, 7 bits */
-#define SR_MASK				0x7f		/* cover 7 bits */
-#define SR_BUSY				(1 << 0)
-#define SR_TF_NOT_FULL			(1 << 1)
-#define SR_TF_EMPT			(1 << 2)
-#define SR_RF_NOT_EMPT			(1 << 3)
-#define SR_RF_FULL			(1 << 4)
-#define SR_TX_ERR			(1 << 5)
-#define SR_DCOL				(1 << 6)
-
-struct dw_spi_reg {
-	u32	ctrl0;
-	u32	ctrl1;
-	u32	ssienr;
-	u32	mwcr;
-	u32	ser;
-	u32	baudr;
-	u32	txfltr;
-	u32	rxfltr;
-	u32	txflr;
-	u32	rxflr;
-	u32	sr;
-	u32	imr;
-	u32	isr;
-	u32	risr;
-	u32	txoicr;
-	u32	rxoicr;
-	u32	rxuicr;
-	u32	msticr;
-	u32	icr;
-	u32	dmacr;
-	u32	dmatdlr;
-	u32	dmardlr;
-	u32	idr;
-	u32	version;
-
-	/* Currently operates as 32 bits, though only the low 16 bits matter */
-	u32	dr;
-} __packed;
-
-#define dw_readl(dw, name)		__raw_readl(&(dw)->name)
-#define dw_writel(dw, name, val)	__raw_writel((val), &(dw)->name)
-
-/* Default use SPI0 register for mrst, we will detect Penwell and use SPI1 */
-static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0;
-
-static u32 *pclk_spi0;
-/* Always contains an accessible address, start with 0 */
-static struct dw_spi_reg *pspi;
-
-static struct kmsg_dumper dw_dumper;
-static int dumper_registered;
-
-static void dw_kmsg_dump(struct kmsg_dumper *dumper,
-			 enum kmsg_dump_reason reason)
-{
-	static char line[1024];
-	size_t len;
-
-	/* When run to this, we'd better re-init the HW */
-	mrst_early_console_init();
-
-	while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len))
-		early_mrst_console.write(&early_mrst_console, line, len);
-}
-
-/* Set the ratio rate to 115200, 8n1, IRQ disabled */
-static void max3110_write_config(void)
-{
-	u16 config;
-
-	config = 0xc001;
-	dw_writel(pspi, dr, config);
-}
-
-/* Translate char to a eligible word and send to max3110 */
-static void max3110_write_data(char c)
-{
-	u16 data;
-
-	data = 0x8000 | c;
-	dw_writel(pspi, dr, data);
-}
-
-void mrst_early_console_init(void)
-{
-	u32 ctrlr0 = 0;
-	u32 spi0_cdiv;
-	u32 freq; /* Freqency info only need be searched once */
-
-	/* Base clk is 100 MHz, the actual clk = 100M / (clk_divider + 1) */
-	pclk_spi0 = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
-							MRST_CLK_SPI0_REG);
-	spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9;
-	freq = 100000000 / (spi0_cdiv + 1);
-
-	if (mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL)
-		mrst_spi_paddr = MRST_REGBASE_SPI1;
-
-	pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
-						mrst_spi_paddr);
-
-	/* Disable SPI controller */
-	dw_writel(pspi, ssienr, 0);
-
-	/* Set control param, 8 bits, transmit only mode */
-	ctrlr0 = dw_readl(pspi, ctrl0);
-
-	ctrlr0 &= 0xfcc0;
-	ctrlr0 |= 0xf | (SPI_FRF_SPI << SPI_FRF_OFFSET)
-		      | (SPI_TMOD_TO << SPI_TMOD_OFFSET);
-	dw_writel(pspi, ctrl0, ctrlr0);
-
-	/*
-	 * Change the spi0 clk to comply with 115200 bps, use 100000 to
-	 * calculate the clk dividor to make the clock a little slower
-	 * than real baud rate.
-	 */
-	dw_writel(pspi, baudr, freq/100000);
-
-	/* Disable all INT for early phase */
-	dw_writel(pspi, imr, 0x0);
-
-	/* Set the cs to spi-uart */
-	dw_writel(pspi, ser, 0x2);
-
-	/* Enable the HW, the last step for HW init */
-	dw_writel(pspi, ssienr, 0x1);
-
-	/* Set the default configuration */
-	max3110_write_config();
-
-	/* Register the kmsg dumper */
-	if (!dumper_registered) {
-		dw_dumper.dump = dw_kmsg_dump;
-		kmsg_dump_register(&dw_dumper);
-		dumper_registered = 1;
-	}
-}
-
-/* Slave select should be called in the read/write function */
-static void early_mrst_spi_putc(char c)
-{
-	unsigned int timeout;
-	u32 sr;
-
-	timeout = MRST_SPI_TIMEOUT;
-	/* Early putc needs to make sure the TX FIFO is not full */
-	while (--timeout) {
-		sr = dw_readl(pspi, sr);
-		if (!(sr & SR_TF_NOT_FULL))
-			cpu_relax();
-		else
-			break;
-	}
-
-	if (!timeout)
-		pr_warn("MRST earlycon: timed out\n");
-	else
-		max3110_write_data(c);
-}
-
-/* Early SPI only uses polling mode */
-static void early_mrst_spi_write(struct console *con, const char *str,
-					unsigned n)
-{
-	int i;
-
-	for (i = 0; i < n && *str; i++) {
-		if (*str == '\n')
-			early_mrst_spi_putc('\r');
-		early_mrst_spi_putc(*str);
-		str++;
-	}
-}
-
-struct console early_mrst_console = {
-	.name =		"earlymrst",
-	.write =	early_mrst_spi_write,
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
-};
-
-/*
- * Following is the early console based on Medfield HSU (High
- * Speed UART) device.
- */
-#define HSU_PORT_BASE		0xffa28080
-
-static void __iomem *phsu;
-
-void hsu_early_console_init(const char *s)
-{
-	unsigned long paddr, port = 0;
-	u8 lcr;
-
-	/*
-	 * Select the early HSU console port if specified by user in the
-	 * kernel command line.
-	 */
-	if (*s && !kstrtoul(s, 10, &port))
-		port = clamp_val(port, 0, 2);
-
-	paddr = HSU_PORT_BASE + port * 0x80;
-	phsu = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, paddr);
-
-	/* Disable FIFO */
-	writeb(0x0, phsu + UART_FCR);
-
-	/* Set to default 115200 bps, 8n1 */
-	lcr = readb(phsu + UART_LCR);
-	writeb((0x80 | lcr), phsu + UART_LCR);
-	writeb(0x18, phsu + UART_DLL);
-	writeb(lcr,  phsu + UART_LCR);
-	writel(0x3600, phsu + UART_MUL*4);
-
-	writeb(0x8, phsu + UART_MCR);
-	writeb(0x7, phsu + UART_FCR);
-	writeb(0x3, phsu + UART_LCR);
-
-	/* Clear IRQ status */
-	readb(phsu + UART_LSR);
-	readb(phsu + UART_RX);
-	readb(phsu + UART_IIR);
-	readb(phsu + UART_MSR);
-
-	/* Enable FIFO */
-	writeb(0x7, phsu + UART_FCR);
-}
-
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
-static void early_hsu_putc(char ch)
-{
-	unsigned int timeout = 10000; /* 10ms */
-	u8 status;
-
-	while (--timeout) {
-		status = readb(phsu + UART_LSR);
-		if (status & BOTH_EMPTY)
-			break;
-		udelay(1);
-	}
-
-	/* Only write the char when there was no timeout */
-	if (timeout)
-		writeb(ch, phsu + UART_TX);
-}
-
-static void early_hsu_write(struct console *con, const char *str, unsigned n)
-{
-	int i;
-
-	for (i = 0; i < n && *str; i++) {
-		if (*str == '\n')
-			early_hsu_putc('\r');
-		early_hsu_putc(*str);
-		str++;
-	}
-}
-
-struct console early_hsu_console = {
-	.name =		"earlyhsu",
-	.write =	early_hsu_write,
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
-};
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
deleted file mode 100644
index 235a74244777..000000000000
--- a/arch/x86/platform/mrst/mrst.c
+++ /dev/null
@@ -1,1054 +0,0 @@
-/*
- * mrst.c: Intel Moorestown platform specific setup code
- *
- * (C) Copyright 2008 Intel Corporation
- * Author: Jacob Pan (jacob.jun.pan@intel.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-#define pr_fmt(fmt) "mrst: " fmt
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/scatterlist.h>
-#include <linux/sfi.h>
-#include <linux/intel_pmic_gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include <linux/notifier.h>
-#include <linux/mfd/intel_msic.h>
-#include <linux/gpio.h>
-#include <linux/i2c/tc35876x.h>
-
-#include <asm/setup.h>
-#include <asm/mpspec_def.h>
-#include <asm/hw_irq.h>
-#include <asm/apic.h>
-#include <asm/io_apic.h>
-#include <asm/mrst.h>
-#include <asm/mrst-vrtc.h>
-#include <asm/io.h>
-#include <asm/i8259.h>
-#include <asm/intel_scu_ipc.h>
-#include <asm/apb_timer.h>
-#include <asm/reboot.h>
-
-/*
- * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock,
- * cmdline option x86_mrst_timer can be used to override the configuration
- * to prefer one or the other.
- * at runtime, there are basically three timer configurations:
- * 1. per cpu apbt clock only
- * 2. per cpu always-on lapic clocks only, this is Penwell/Medfield only
- * 3. per cpu lapic clock (C3STOP) and one apbt clock, with broadcast.
- *
- * by default (without cmdline option), platform code first detects cpu type
- * to see if we are on lincroft or penwell, then set up both lapic or apbt
- * clocks accordingly.
- * i.e. by default, medfield uses configuration #2, moorestown uses #1.
- * config #3 is supported but not recommended on medfield.
- *
- * rating and feature summary:
- * lapic (with C3STOP) --------- 100
- * apbt (always-on) ------------ 110
- * lapic (always-on,ARAT) ------ 150
- */
-
-enum mrst_timer_options mrst_timer_options;
-
-static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
-static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
-enum mrst_cpu_type __mrst_cpu_chip;
-EXPORT_SYMBOL_GPL(__mrst_cpu_chip);
-
-int sfi_mtimer_num;
-
-struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
-EXPORT_SYMBOL_GPL(sfi_mrtc_array);
-int sfi_mrtc_num;
-
-static void mrst_power_off(void)
-{
-}
-
-static void mrst_reboot(void)
-{
-	intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
-}
-
-/* parse all the mtimer info to a static mtimer array */
-static int __init sfi_parse_mtmr(struct sfi_table_header *table)
-{
-	struct sfi_table_simple *sb;
-	struct sfi_timer_table_entry *pentry;
-	struct mpc_intsrc mp_irq;
-	int totallen;
-
-	sb = (struct sfi_table_simple *)table;
-	if (!sfi_mtimer_num) {
-		sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb,
-					struct sfi_timer_table_entry);
-		pentry = (struct sfi_timer_table_entry *) sb->pentry;
-		totallen = sfi_mtimer_num * sizeof(*pentry);
-		memcpy(sfi_mtimer_array, pentry, totallen);
-	}
-
-	pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num);
-	pentry = sfi_mtimer_array;
-	for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) {
-		pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz,"
-			" irq = %d\n", totallen, (u32)pentry->phys_addr,
-			pentry->freq_hz, pentry->irq);
-			if (!pentry->irq)
-				continue;
-			mp_irq.type = MP_INTSRC;
-			mp_irq.irqtype = mp_INT;
-/* triggering mode edge bit 2-3, active high polarity bit 0-1 */
-			mp_irq.irqflag = 5;
-			mp_irq.srcbus = MP_BUS_ISA;
-			mp_irq.srcbusirq = pentry->irq;	/* IRQ */
-			mp_irq.dstapic = MP_APIC_ALL;
-			mp_irq.dstirq = pentry->irq;
-			mp_save_irq(&mp_irq);
-	}
-
-	return 0;
-}
-
-struct sfi_timer_table_entry *sfi_get_mtmr(int hint)
-{
-	int i;
-	if (hint < sfi_mtimer_num) {
-		if (!sfi_mtimer_usage[hint]) {
-			pr_debug("hint taken for timer %d irq %d\n",
-				hint, sfi_mtimer_array[hint].irq);
-			sfi_mtimer_usage[hint] = 1;
-			return &sfi_mtimer_array[hint];
-		}
-	}
-	/* take the first timer available */
-	for (i = 0; i < sfi_mtimer_num;) {
-		if (!sfi_mtimer_usage[i]) {
-			sfi_mtimer_usage[i] = 1;
-			return &sfi_mtimer_array[i];
-		}
-		i++;
-	}
-	return NULL;
-}
-
-void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr)
-{
-	int i;
-	for (i = 0; i < sfi_mtimer_num;) {
-		if (mtmr->irq == sfi_mtimer_array[i].irq) {
-			sfi_mtimer_usage[i] = 0;
-			return;
-		}
-		i++;
-	}
-}
-
-/* parse all the mrtc info to a global mrtc array */
-int __init sfi_parse_mrtc(struct sfi_table_header *table)
-{
-	struct sfi_table_simple *sb;
-	struct sfi_rtc_table_entry *pentry;
-	struct mpc_intsrc mp_irq;
-
-	int totallen;
-
-	sb = (struct sfi_table_simple *)table;
-	if (!sfi_mrtc_num) {
-		sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb,
-						struct sfi_rtc_table_entry);
-		pentry = (struct sfi_rtc_table_entry *)sb->pentry;
-		totallen = sfi_mrtc_num * sizeof(*pentry);
-		memcpy(sfi_mrtc_array, pentry, totallen);
-	}
-
-	pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num);
-	pentry = sfi_mrtc_array;
-	for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) {
-		pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n",
-			totallen, (u32)pentry->phys_addr, pentry->irq);
-		mp_irq.type = MP_INTSRC;
-		mp_irq.irqtype = mp_INT;
-		mp_irq.irqflag = 0xf;	/* level trigger and active low */
-		mp_irq.srcbus = MP_BUS_ISA;
-		mp_irq.srcbusirq = pentry->irq;	/* IRQ */
-		mp_irq.dstapic = MP_APIC_ALL;
-		mp_irq.dstirq = pentry->irq;
-		mp_save_irq(&mp_irq);
-	}
-	return 0;
-}
-
-static unsigned long __init mrst_calibrate_tsc(void)
-{
-	unsigned long fast_calibrate;
-	u32 lo, hi, ratio, fsb;
-
-	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
-	pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi);
-	ratio = (hi >> 8) & 0x1f;
-	pr_debug("ratio is %d\n", ratio);
-	if (!ratio) {
-		pr_err("read a zero ratio, should be incorrect!\n");
-		pr_err("force tsc ratio to 16 ...\n");
-		ratio = 16;
-	}
-	rdmsr(MSR_FSB_FREQ, lo, hi);
-	if ((lo & 0x7) == 0x7)
-		fsb = PENWELL_FSB_FREQ_83SKU;
-	else
-		fsb = PENWELL_FSB_FREQ_100SKU;
-	fast_calibrate = ratio * fsb;
-	pr_debug("read penwell tsc %lu khz\n", fast_calibrate);
-	lapic_timer_frequency = fsb * 1000 / HZ;
-	/* mark tsc clocksource as reliable */
-	set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
-	
-	if (fast_calibrate)
-		return fast_calibrate;
-
-	return 0;
-}
-
-static void __init mrst_time_init(void)
-{
-	sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
-	switch (mrst_timer_options) {
-	case MRST_TIMER_APBT_ONLY:
-		break;
-	case MRST_TIMER_LAPIC_APBT:
-		x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
-		x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
-		break;
-	default:
-		if (!boot_cpu_has(X86_FEATURE_ARAT))
-			break;
-		x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
-		x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
-		return;
-	}
-	/* we need at least one APB timer */
-	pre_init_apic_IRQ0();
-	apbt_time_init();
-}
-
-static void mrst_arch_setup(void)
-{
-	if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
-		__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
-	else {
-		pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n",
-			boot_cpu_data.x86, boot_cpu_data.x86_model);
-		__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
-	}
-}
-
-/* MID systems don't have i8042 controller */
-static int mrst_i8042_detect(void)
-{
-	return 0;
-}
-
-/*
- * Moorestown does not have external NMI source nor port 0x61 to report
- * NMI status. The possible NMI sources are from pmu as a result of NMI
- * watchdog or lock debug. Reading io port 0x61 results in 0xff which
- * misled NMI handler.
- */
-static unsigned char mrst_get_nmi_reason(void)
-{
-	return 0;
-}
-
-/*
- * Moorestown specific x86_init function overrides and early setup
- * calls.
- */
-void __init x86_mrst_early_setup(void)
-{
-	x86_init.resources.probe_roms = x86_init_noop;
-	x86_init.resources.reserve_resources = x86_init_noop;
-
-	x86_init.timers.timer_init = mrst_time_init;
-	x86_init.timers.setup_percpu_clockev = x86_init_noop;
-
-	x86_init.irqs.pre_vector_init = x86_init_noop;
-
-	x86_init.oem.arch_setup = mrst_arch_setup;
-
-	x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock;
-
-	x86_platform.calibrate_tsc = mrst_calibrate_tsc;
-	x86_platform.i8042_detect = mrst_i8042_detect;
-	x86_init.timers.wallclock_init = mrst_rtc_init;
-	x86_platform.get_nmi_reason = mrst_get_nmi_reason;
-
-	x86_init.pci.init = pci_mrst_init;
-	x86_init.pci.fixup_irqs = x86_init_noop;
-
-	legacy_pic = &null_legacy_pic;
-
-	/* Moorestown specific power_off/restart method */
-	pm_power_off = mrst_power_off;
-	machine_ops.emergency_restart  = mrst_reboot;
-
-	/* Avoid searching for BIOS MP tables */
-	x86_init.mpparse.find_smp_config = x86_init_noop;
-	x86_init.mpparse.get_smp_config = x86_init_uint_noop;
-	set_bit(MP_BUS_ISA, mp_bus_not_pci);
-}
-
-/*
- * if user does not want to use per CPU apb timer, just give it a lower rating
- * than local apic timer and skip the late per cpu timer init.
- */
-static inline int __init setup_x86_mrst_timer(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	if (strcmp("apbt_only", arg) == 0)
-		mrst_timer_options = MRST_TIMER_APBT_ONLY;
-	else if (strcmp("lapic_and_apbt", arg) == 0)
-		mrst_timer_options = MRST_TIMER_LAPIC_APBT;
-	else {
-		pr_warn("X86 MRST timer option %s not recognised"
-			   " use x86_mrst_timer=apbt_only or lapic_and_apbt\n",
-			   arg);
-		return -EINVAL;
-	}
-	return 0;
-}
-__setup("x86_mrst_timer=", setup_x86_mrst_timer);
-
-/*
- * Parsing GPIO table first, since the DEVS table will need this table
- * to map the pin name to the actual pin.
- */
-static struct sfi_gpio_table_entry *gpio_table;
-static int gpio_num_entry;
-
-static int __init sfi_parse_gpio(struct sfi_table_header *table)
-{
-	struct sfi_table_simple *sb;
-	struct sfi_gpio_table_entry *pentry;
-	int num, i;
-
-	if (gpio_table)
-		return 0;
-	sb = (struct sfi_table_simple *)table;
-	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry);
-	pentry = (struct sfi_gpio_table_entry *)sb->pentry;
-
-	gpio_table = kmalloc(num * sizeof(*pentry), GFP_KERNEL);
-	if (!gpio_table)
-		return -1;
-	memcpy(gpio_table, pentry, num * sizeof(*pentry));
-	gpio_num_entry = num;
-
-	pr_debug("GPIO pin info:\n");
-	for (i = 0; i < num; i++, pentry++)
-		pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s,"
-		" pin = %d\n", i,
-			pentry->controller_name,
-			pentry->pin_name,
-			pentry->pin_no);
-	return 0;
-}
-
-static int get_gpio_by_name(const char *name)
-{
-	struct sfi_gpio_table_entry *pentry = gpio_table;
-	int i;
-
-	if (!pentry)
-		return -1;
-	for (i = 0; i < gpio_num_entry; i++, pentry++) {
-		if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN))
-			return pentry->pin_no;
-	}
-	return -1;
-}
-
-/*
- * Here defines the array of devices platform data that IAFW would export
- * through SFI "DEVS" table, we use name and type to match the device and
- * its platform data.
- */
-struct devs_id {
-	char name[SFI_NAME_LEN + 1];
-	u8 type;
-	u8 delay;
-	void *(*get_platform_data)(void *info);
-};
-
-/* the offset for the mapping of global gpio pin to irq */
-#define MRST_IRQ_OFFSET 0x100
-
-static void __init *pmic_gpio_platform_data(void *info)
-{
-	static struct intel_pmic_gpio_platform_data pmic_gpio_pdata;
-	int gpio_base = get_gpio_by_name("pmic_gpio_base");
-
-	if (gpio_base == -1)
-		gpio_base = 64;
-	pmic_gpio_pdata.gpio_base = gpio_base;
-	pmic_gpio_pdata.irq_base = gpio_base + MRST_IRQ_OFFSET;
-	pmic_gpio_pdata.gpiointr = 0xffffeff8;
-
-	return &pmic_gpio_pdata;
-}
-
-static void __init *max3111_platform_data(void *info)
-{
-	struct spi_board_info *spi_info = info;
-	int intr = get_gpio_by_name("max3111_int");
-
-	spi_info->mode = SPI_MODE_0;
-	if (intr == -1)
-		return NULL;
-	spi_info->irq = intr + MRST_IRQ_OFFSET;
-	return NULL;
-}
-
-/* we have multiple max7315 on the board ... */
-#define MAX7315_NUM 2
-static void __init *max7315_platform_data(void *info)
-{
-	static struct pca953x_platform_data max7315_pdata[MAX7315_NUM];
-	static int nr;
-	struct pca953x_platform_data *max7315 = &max7315_pdata[nr];
-	struct i2c_board_info *i2c_info = info;
-	int gpio_base, intr;
-	char base_pin_name[SFI_NAME_LEN + 1];
-	char intr_pin_name[SFI_NAME_LEN + 1];
-
-	if (nr == MAX7315_NUM) {
-		pr_err("too many max7315s, we only support %d\n",
-				MAX7315_NUM);
-		return NULL;
-	}
-	/* we have several max7315 on the board, we only need load several
-	 * instances of the same pca953x driver to cover them
-	 */
-	strcpy(i2c_info->type, "max7315");
-	if (nr++) {
-		sprintf(base_pin_name, "max7315_%d_base", nr);
-		sprintf(intr_pin_name, "max7315_%d_int", nr);
-	} else {
-		strcpy(base_pin_name, "max7315_base");
-		strcpy(intr_pin_name, "max7315_int");
-	}
-
-	gpio_base = get_gpio_by_name(base_pin_name);
-	intr = get_gpio_by_name(intr_pin_name);
-
-	if (gpio_base == -1)
-		return NULL;
-	max7315->gpio_base = gpio_base;
-	if (intr != -1) {
-		i2c_info->irq = intr + MRST_IRQ_OFFSET;
-		max7315->irq_base = gpio_base + MRST_IRQ_OFFSET;
-	} else {
-		i2c_info->irq = -1;
-		max7315->irq_base = -1;
-	}
-	return max7315;
-}
-
-static void *tca6416_platform_data(void *info)
-{
-	static struct pca953x_platform_data tca6416;
-	struct i2c_board_info *i2c_info = info;
-	int gpio_base, intr;
-	char base_pin_name[SFI_NAME_LEN + 1];
-	char intr_pin_name[SFI_NAME_LEN + 1];
-
-	strcpy(i2c_info->type, "tca6416");
-	strcpy(base_pin_name, "tca6416_base");
-	strcpy(intr_pin_name, "tca6416_int");
-
-	gpio_base = get_gpio_by_name(base_pin_name);
-	intr = get_gpio_by_name(intr_pin_name);
-
-	if (gpio_base == -1)
-		return NULL;
-	tca6416.gpio_base = gpio_base;
-	if (intr != -1) {
-		i2c_info->irq = intr + MRST_IRQ_OFFSET;
-		tca6416.irq_base = gpio_base + MRST_IRQ_OFFSET;
-	} else {
-		i2c_info->irq = -1;
-		tca6416.irq_base = -1;
-	}
-	return &tca6416;
-}
-
-static void *mpu3050_platform_data(void *info)
-{
-	struct i2c_board_info *i2c_info = info;
-	int intr = get_gpio_by_name("mpu3050_int");
-
-	if (intr == -1)
-		return NULL;
-
-	i2c_info->irq = intr + MRST_IRQ_OFFSET;
-	return NULL;
-}
-
-static void __init *emc1403_platform_data(void *info)
-{
-	static short intr2nd_pdata;
-	struct i2c_board_info *i2c_info = info;
-	int intr = get_gpio_by_name("thermal_int");
-	int intr2nd = get_gpio_by_name("thermal_alert");
-
-	if (intr == -1 || intr2nd == -1)
-		return NULL;
-
-	i2c_info->irq = intr + MRST_IRQ_OFFSET;
-	intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
-
-	return &intr2nd_pdata;
-}
-
-static void __init *lis331dl_platform_data(void *info)
-{
-	static short intr2nd_pdata;
-	struct i2c_board_info *i2c_info = info;
-	int intr = get_gpio_by_name("accel_int");
-	int intr2nd = get_gpio_by_name("accel_2");
-
-	if (intr == -1 || intr2nd == -1)
-		return NULL;
-
-	i2c_info->irq = intr + MRST_IRQ_OFFSET;
-	intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
-
-	return &intr2nd_pdata;
-}
-
-static void __init *no_platform_data(void *info)
-{
-	return NULL;
-}
-
-static struct resource msic_resources[] = {
-	{
-		.start	= INTEL_MSIC_IRQ_PHYS_BASE,
-		.end	= INTEL_MSIC_IRQ_PHYS_BASE + 64 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct intel_msic_platform_data msic_pdata;
-
-static struct platform_device msic_device = {
-	.name		= "intel_msic",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &msic_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(msic_resources),
-	.resource	= msic_resources,
-};
-
-static inline bool mrst_has_msic(void)
-{
-	return mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL;
-}
-
-static int msic_scu_status_change(struct notifier_block *nb,
-				  unsigned long code, void *data)
-{
-	if (code == SCU_DOWN) {
-		platform_device_unregister(&msic_device);
-		return 0;
-	}
-
-	return platform_device_register(&msic_device);
-}
-
-static int __init msic_init(void)
-{
-	static struct notifier_block msic_scu_notifier = {
-		.notifier_call	= msic_scu_status_change,
-	};
-
-	/*
-	 * We need to be sure that the SCU IPC is ready before MSIC device
-	 * can be registered.
-	 */
-	if (mrst_has_msic())
-		intel_scu_notifier_add(&msic_scu_notifier);
-
-	return 0;
-}
-arch_initcall(msic_init);
-
-/*
- * msic_generic_platform_data - sets generic platform data for the block
- * @info: pointer to the SFI device table entry for this block
- * @block: MSIC block
- *
- * Function sets IRQ number from the SFI table entry for given device to
- * the MSIC platform data.
- */
-static void *msic_generic_platform_data(void *info, enum intel_msic_block block)
-{
-	struct sfi_device_table_entry *entry = info;
-
-	BUG_ON(block < 0 || block >= INTEL_MSIC_BLOCK_LAST);
-	msic_pdata.irq[block] = entry->irq;
-
-	return no_platform_data(info);
-}
-
-static void *msic_battery_platform_data(void *info)
-{
-	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_BATTERY);
-}
-
-static void *msic_gpio_platform_data(void *info)
-{
-	static struct intel_msic_gpio_pdata pdata;
-	int gpio = get_gpio_by_name("msic_gpio_base");
-
-	if (gpio < 0)
-		return NULL;
-
-	pdata.gpio_base = gpio;
-	msic_pdata.gpio = &pdata;
-
-	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_GPIO);
-}
-
-static void *msic_audio_platform_data(void *info)
-{
-	struct platform_device *pdev;
-
-	pdev = platform_device_register_simple("sst-platform", -1, NULL, 0);
-	if (IS_ERR(pdev)) {
-		pr_err("failed to create audio platform device\n");
-		return NULL;
-	}
-
-	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_AUDIO);
-}
-
-static void *msic_power_btn_platform_data(void *info)
-{
-	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN);
-}
-
-static void *msic_ocd_platform_data(void *info)
-{
-	static struct intel_msic_ocd_pdata pdata;
-	int gpio = get_gpio_by_name("ocd_gpio");
-
-	if (gpio < 0)
-		return NULL;
-
-	pdata.gpio = gpio;
-	msic_pdata.ocd = &pdata;
-
-	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD);
-}
-
-static void *msic_thermal_platform_data(void *info)
-{
-	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_THERMAL);
-}
-
-/* tc35876x DSI-LVDS bridge chip and panel platform data */
-static void *tc35876x_platform_data(void *data)
-{
-	static struct tc35876x_platform_data pdata;
-
-	/* gpio pins set to -1 will not be used by the driver */
-	pdata.gpio_bridge_reset = get_gpio_by_name("LCMB_RXEN");
-	pdata.gpio_panel_bl_en = get_gpio_by_name("6S6P_BL_EN");
-	pdata.gpio_panel_vadd = get_gpio_by_name("EN_VREG_LCD_V3P3");
-
-	return &pdata;
-}
-
-static const struct devs_id __initconst device_ids[] = {
-	{"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data},
-	{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
-	{"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data},
-	{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
-	{"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
-	{"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
-	{"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data},
-	{"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data},
-	{"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data},
-	{"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
-	{"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data},
-	{"i2c_disp_brig", SFI_DEV_TYPE_I2C, 0, &tc35876x_platform_data},
-
-	/* MSIC subdevices */
-	{"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data},
-	{"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data},
-	{"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data},
-	{"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data},
-	{"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data},
-	{"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data},
-
-	{},
-};
-
-#define MAX_IPCDEVS	24
-static struct platform_device *ipc_devs[MAX_IPCDEVS];
-static int ipc_next_dev;
-
-#define MAX_SCU_SPI	24
-static struct spi_board_info *spi_devs[MAX_SCU_SPI];
-static int spi_next_dev;
-
-#define MAX_SCU_I2C	24
-static struct i2c_board_info *i2c_devs[MAX_SCU_I2C];
-static int i2c_bus[MAX_SCU_I2C];
-static int i2c_next_dev;
-
-static void __init intel_scu_device_register(struct platform_device *pdev)
-{
-	if (ipc_next_dev == MAX_IPCDEVS)
-		pr_err("too many SCU IPC devices");
-	else
-		ipc_devs[ipc_next_dev++] = pdev;
-}
-
-static void __init intel_scu_spi_device_register(struct spi_board_info *sdev)
-{
-	struct spi_board_info *new_dev;
-
-	if (spi_next_dev == MAX_SCU_SPI) {
-		pr_err("too many SCU SPI devices");
-		return;
-	}
-
-	new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL);
-	if (!new_dev) {
-		pr_err("failed to alloc mem for delayed spi dev %s\n",
-			sdev->modalias);
-		return;
-	}
-	memcpy(new_dev, sdev, sizeof(*sdev));
-
-	spi_devs[spi_next_dev++] = new_dev;
-}
-
-static void __init intel_scu_i2c_device_register(int bus,
-						struct i2c_board_info *idev)
-{
-	struct i2c_board_info *new_dev;
-
-	if (i2c_next_dev == MAX_SCU_I2C) {
-		pr_err("too many SCU I2C devices");
-		return;
-	}
-
-	new_dev = kzalloc(sizeof(*idev), GFP_KERNEL);
-	if (!new_dev) {
-		pr_err("failed to alloc mem for delayed i2c dev %s\n",
-			idev->type);
-		return;
-	}
-	memcpy(new_dev, idev, sizeof(*idev));
-
-	i2c_bus[i2c_next_dev] = bus;
-	i2c_devs[i2c_next_dev++] = new_dev;
-}
-
-BLOCKING_NOTIFIER_HEAD(intel_scu_notifier);
-EXPORT_SYMBOL_GPL(intel_scu_notifier);
-
-/* Called by IPC driver */
-void intel_scu_devices_create(void)
-{
-	int i;
-
-	for (i = 0; i < ipc_next_dev; i++)
-		platform_device_add(ipc_devs[i]);
-
-	for (i = 0; i < spi_next_dev; i++)
-		spi_register_board_info(spi_devs[i], 1);
-
-	for (i = 0; i < i2c_next_dev; i++) {
-		struct i2c_adapter *adapter;
-		struct i2c_client *client;
-
-		adapter = i2c_get_adapter(i2c_bus[i]);
-		if (adapter) {
-			client = i2c_new_device(adapter, i2c_devs[i]);
-			if (!client)
-				pr_err("can't create i2c device %s\n",
-					i2c_devs[i]->type);
-		} else
-			i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
-	}
-	intel_scu_notifier_post(SCU_AVAILABLE, NULL);
-}
-EXPORT_SYMBOL_GPL(intel_scu_devices_create);
-
-/* Called by IPC driver */
-void intel_scu_devices_destroy(void)
-{
-	int i;
-
-	intel_scu_notifier_post(SCU_DOWN, NULL);
-
-	for (i = 0; i < ipc_next_dev; i++)
-		platform_device_del(ipc_devs[i]);
-}
-EXPORT_SYMBOL_GPL(intel_scu_devices_destroy);
-
-static void __init install_irq_resource(struct platform_device *pdev, int irq)
-{
-	/* Single threaded */
-	static struct resource __initdata res = {
-		.name = "IRQ",
-		.flags = IORESOURCE_IRQ,
-	};
-	res.start = irq;
-	platform_device_add_resources(pdev, &res, 1);
-}
-
-static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *entry)
-{
-	const struct devs_id *dev = device_ids;
-	struct platform_device *pdev;
-	void *pdata = NULL;
-
-	while (dev->name[0]) {
-		if (dev->type == SFI_DEV_TYPE_IPC &&
-			!strncmp(dev->name, entry->name, SFI_NAME_LEN)) {
-			pdata = dev->get_platform_data(entry);
-			break;
-		}
-		dev++;
-	}
-
-	/*
-	 * On Medfield the platform device creation is handled by the MSIC
-	 * MFD driver so we don't need to do it here.
-	 */
-	if (mrst_has_msic())
-		return;
-
-	pdev = platform_device_alloc(entry->name, 0);
-	if (pdev == NULL) {
-		pr_err("out of memory for SFI platform device '%s'.\n",
-			entry->name);
-		return;
-	}
-	install_irq_resource(pdev, entry->irq);
-
-	pdev->dev.platform_data = pdata;
-	intel_scu_device_register(pdev);
-}
-
-static void __init sfi_handle_spi_dev(struct spi_board_info *spi_info)
-{
-	const struct devs_id *dev = device_ids;
-	void *pdata = NULL;
-
-	while (dev->name[0]) {
-		if (dev->type == SFI_DEV_TYPE_SPI &&
-			!strncmp(dev->name, spi_info->modalias,
-						SFI_NAME_LEN)) {
-			pdata = dev->get_platform_data(spi_info);
-			break;
-		}
-		dev++;
-	}
-	spi_info->platform_data = pdata;
-	if (dev->delay)
-		intel_scu_spi_device_register(spi_info);
-	else
-		spi_register_board_info(spi_info, 1);
-}
-
-static void __init sfi_handle_i2c_dev(int bus, struct i2c_board_info *i2c_info)
-{
-	const struct devs_id *dev = device_ids;
-	void *pdata = NULL;
-
-	while (dev->name[0]) {
-		if (dev->type == SFI_DEV_TYPE_I2C &&
-			!strncmp(dev->name, i2c_info->type, SFI_NAME_LEN)) {
-			pdata = dev->get_platform_data(i2c_info);
-			break;
-		}
-		dev++;
-	}
-	i2c_info->platform_data = pdata;
-
-	if (dev->delay)
-		intel_scu_i2c_device_register(bus, i2c_info);
-	else
-		i2c_register_board_info(bus, i2c_info, 1);
-}
-
-
-static int __init sfi_parse_devs(struct sfi_table_header *table)
-{
-	struct sfi_table_simple *sb;
-	struct sfi_device_table_entry *pentry;
-	struct spi_board_info spi_info;
-	struct i2c_board_info i2c_info;
-	int num, i, bus;
-	int ioapic;
-	struct io_apic_irq_attr irq_attr;
-
-	sb = (struct sfi_table_simple *)table;
-	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
-	pentry = (struct sfi_device_table_entry *)sb->pentry;
-
-	for (i = 0; i < num; i++, pentry++) {
-		int irq = pentry->irq;
-
-		if (irq != (u8)0xff) { /* native RTE case */
-			/* these SPI2 devices are not exposed to system as PCI
-			 * devices, but they have separate RTE entry in IOAPIC
-			 * so we have to enable them one by one here
-			 */
-			ioapic = mp_find_ioapic(irq);
-			irq_attr.ioapic = ioapic;
-			irq_attr.ioapic_pin = irq;
-			irq_attr.trigger = 1;
-			irq_attr.polarity = 1;
-			io_apic_set_pci_routing(NULL, irq, &irq_attr);
-		} else
-			irq = 0; /* No irq */
-
-		switch (pentry->type) {
-		case SFI_DEV_TYPE_IPC:
-			pr_debug("info[%2d]: IPC bus, name = %16.16s, "
-				"irq = 0x%2x\n", i, pentry->name, pentry->irq);
-			sfi_handle_ipc_dev(pentry);
-			break;
-		case SFI_DEV_TYPE_SPI:
-			memset(&spi_info, 0, sizeof(spi_info));
-			strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
-			spi_info.irq = irq;
-			spi_info.bus_num = pentry->host_num;
-			spi_info.chip_select = pentry->addr;
-			spi_info.max_speed_hz = pentry->max_freq;
-			pr_debug("info[%2d]: SPI bus = %d, name = %16.16s, "
-				"irq = 0x%2x, max_freq = %d, cs = %d\n", i,
-				spi_info.bus_num,
-				spi_info.modalias,
-				spi_info.irq,
-				spi_info.max_speed_hz,
-				spi_info.chip_select);
-			sfi_handle_spi_dev(&spi_info);
-			break;
-		case SFI_DEV_TYPE_I2C:
-			memset(&i2c_info, 0, sizeof(i2c_info));
-			bus = pentry->host_num;
-			strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
-			i2c_info.irq = irq;
-			i2c_info.addr = pentry->addr;
-			pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, "
-				"irq = 0x%2x, addr = 0x%x\n", i, bus,
-				i2c_info.type,
-				i2c_info.irq,
-				i2c_info.addr);
-			sfi_handle_i2c_dev(bus, &i2c_info);
-			break;
-		case SFI_DEV_TYPE_UART:
-		case SFI_DEV_TYPE_HSI:
-		default:
-			;
-		}
-	}
-	return 0;
-}
-
-static int __init mrst_platform_init(void)
-{
-	sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
-	sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
-	return 0;
-}
-arch_initcall(mrst_platform_init);
-
-/*
- * we will search these buttons in SFI GPIO table (by name)
- * and register them dynamically. Please add all possible
- * buttons here, we will shrink them if no GPIO found.
- */
-static struct gpio_keys_button gpio_button[] = {
-	{KEY_POWER,		-1, 1, "power_btn",	EV_KEY, 0, 3000},
-	{KEY_PROG1,		-1, 1, "prog_btn1",	EV_KEY, 0, 20},
-	{KEY_PROG2,		-1, 1, "prog_btn2",	EV_KEY, 0, 20},
-	{SW_LID,		-1, 1, "lid_switch",	EV_SW,  0, 20},
-	{KEY_VOLUMEUP,		-1, 1, "vol_up",	EV_KEY, 0, 20},
-	{KEY_VOLUMEDOWN,	-1, 1, "vol_down",	EV_KEY, 0, 20},
-	{KEY_CAMERA,		-1, 1, "camera_full",	EV_KEY, 0, 20},
-	{KEY_CAMERA_FOCUS,	-1, 1, "camera_half",	EV_KEY, 0, 20},
-	{SW_KEYPAD_SLIDE,	-1, 1, "MagSw1",	EV_SW,  0, 20},
-	{SW_KEYPAD_SLIDE,	-1, 1, "MagSw2",	EV_SW,  0, 20},
-};
-
-static struct gpio_keys_platform_data mrst_gpio_keys = {
-	.buttons	= gpio_button,
-	.rep		= 1,
-	.nbuttons	= -1, /* will fill it after search */
-};
-
-static struct platform_device pb_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &mrst_gpio_keys,
-	},
-};
-
-/*
- * Shrink the non-existent buttons, register the gpio button
- * device if there is some
- */
-static int __init pb_keys_init(void)
-{
-	struct gpio_keys_button *gb = gpio_button;
-	int i, num, good = 0;
-
-	num = sizeof(gpio_button) / sizeof(struct gpio_keys_button);
-	for (i = 0; i < num; i++) {
-		gb[i].gpio = get_gpio_by_name(gb[i].desc);
-		pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc,
-					gb[i].gpio);
-		if (gb[i].gpio == -1)
-			continue;
-
-		if (i != good)
-			gb[good] = gb[i];
-		good++;
-	}
-
-	if (good) {
-		mrst_gpio_keys.nbuttons = good;
-		return platform_device_register(&pb_device);
-	}
-	return 0;
-}
-late_initcall(pb_keys_init);
diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c
deleted file mode 100644
index ca4f7d999fd1..000000000000
--- a/arch/x86/platform/mrst/vrtc.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * vrtc.c: Driver for virtual RTC device on Intel MID platform
- *
- * (C) Copyright 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- *
- * Note:
- * VRTC is emulated by system controller firmware, the real HW
- * RTC is located in the PMIC device. SCU FW shadows PMIC RTC
- * in a memory mapped IO space that is visible to the host IA
- * processor.
- *
- * This driver is based on RTC CMOS driver.
- */
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/sfi.h>
-#include <linux/platform_device.h>
-
-#include <asm/mrst.h>
-#include <asm/mrst-vrtc.h>
-#include <asm/time.h>
-#include <asm/fixmap.h>
-
-static unsigned char __iomem *vrtc_virt_base;
-
-unsigned char vrtc_cmos_read(unsigned char reg)
-{
-	unsigned char retval;
-
-	/* vRTC's registers range from 0x0 to 0xD */
-	if (reg > 0xd || !vrtc_virt_base)
-		return 0xff;
-
-	lock_cmos_prefix(reg);
-	retval = __raw_readb(vrtc_virt_base + (reg << 2));
-	lock_cmos_suffix(reg);
-	return retval;
-}
-EXPORT_SYMBOL_GPL(vrtc_cmos_read);
-
-void vrtc_cmos_write(unsigned char val, unsigned char reg)
-{
-	if (reg > 0xd || !vrtc_virt_base)
-		return;
-
-	lock_cmos_prefix(reg);
-	__raw_writeb(val, vrtc_virt_base + (reg << 2));
-	lock_cmos_suffix(reg);
-}
-EXPORT_SYMBOL_GPL(vrtc_cmos_write);
-
-void vrtc_get_time(struct timespec *now)
-{
-	u8 sec, min, hour, mday, mon;
-	unsigned long flags;
-	u32 year;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-
-	while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP))
-		cpu_relax();
-
-	sec = vrtc_cmos_read(RTC_SECONDS);
-	min = vrtc_cmos_read(RTC_MINUTES);
-	hour = vrtc_cmos_read(RTC_HOURS);
-	mday = vrtc_cmos_read(RTC_DAY_OF_MONTH);
-	mon = vrtc_cmos_read(RTC_MONTH);
-	year = vrtc_cmos_read(RTC_YEAR);
-
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	/* vRTC YEAR reg contains the offset to 1972 */
-	year += 1972;
-
-	pr_info("vRTC: sec: %d min: %d hour: %d day: %d "
-		"mon: %d year: %d\n", sec, min, hour, mday, mon, year);
-
-	now->tv_sec = mktime(year, mon, mday, hour, min, sec);
-	now->tv_nsec = 0;
-}
-
-int vrtc_set_mmss(const struct timespec *now)
-{
-	unsigned long flags;
-	struct rtc_time tm;
-	int year;
-	int retval = 0;
-
-	rtc_time_to_tm(now->tv_sec, &tm);
-	if (!rtc_valid_tm(&tm) && tm.tm_year >= 72) {
-		/*
-		 * tm.year is the number of years since 1900, and the
-		 * vrtc need the years since 1972.
-		 */
-		year = tm.tm_year - 72;
-		spin_lock_irqsave(&rtc_lock, flags);
-		vrtc_cmos_write(year, RTC_YEAR);
-		vrtc_cmos_write(tm.tm_mon, RTC_MONTH);
-		vrtc_cmos_write(tm.tm_mday, RTC_DAY_OF_MONTH);
-		vrtc_cmos_write(tm.tm_hour, RTC_HOURS);
-		vrtc_cmos_write(tm.tm_min, RTC_MINUTES);
-		vrtc_cmos_write(tm.tm_sec, RTC_SECONDS);
-		spin_unlock_irqrestore(&rtc_lock, flags);
-	} else {
-		pr_err("%s: Invalid vRTC value: write of %lx to vRTC failed\n",
-			__FUNCTION__, now->tv_sec);
-		retval = -EINVAL;
-	}
-	return retval;
-}
-
-void __init mrst_rtc_init(void)
-{
-	unsigned long vrtc_paddr;
-
-	sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
-
-	vrtc_paddr = sfi_mrtc_array[0].phys_addr;
-	if (!sfi_mrtc_num || !vrtc_paddr)
-		return;
-
-	vrtc_virt_base = (void __iomem *)set_fixmap_offset_nocache(FIX_LNW_VRTC,
-								vrtc_paddr);
-	x86_platform.get_wallclock = vrtc_get_time;
-	x86_platform.set_wallclock = vrtc_set_mmss;
-}
-
-/*
- * The Moorestown platform has a memory mapped virtual RTC device that emulates
- * the programming interface of the RTC.
- */
-
-static struct resource vrtc_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device vrtc_device = {
-	.name		= "rtc_mrst",
-	.id		= -1,
-	.resource	= vrtc_resources,
-	.num_resources	= ARRAY_SIZE(vrtc_resources),
-};
-
-/* Register the RTC device if appropriate */
-static int __init mrst_device_create(void)
-{
-	/* No Moorestown, no device */
-	if (!mrst_identify_cpu())
-		return -ENODEV;
-	/* No timer, no device */
-	if (!sfi_mrtc_num)
-		return -ENODEV;
-
-	/* iomem resource */
-	vrtc_resources[0].start = sfi_mrtc_array[0].phys_addr;
-	vrtc_resources[0].end = sfi_mrtc_array[0].phys_addr +
-				MRST_VRTC_MAP_SZ;
-	/* irq resource */
-	vrtc_resources[1].start = sfi_mrtc_array[0].irq;
-	vrtc_resources[1].end = sfi_mrtc_array[0].irq;
-
-	return platform_device_register(&vrtc_device);
-}
-
-module_init(mrst_device_create);
diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_output.h b/drivers/gpu/drm/gma500/mdfld_dsi_output.h
index 45d5af0546bf..5b646c1f0c3e 100644
--- a/drivers/gpu/drm/gma500/mdfld_dsi_output.h
+++ b/drivers/gpu/drm/gma500/mdfld_dsi_output.h
@@ -39,7 +39,7 @@
 #include "psb_intel_reg.h"
 #include "mdfld_output.h"
 
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
 
 #define FLD_MASK(start, end)	(((1 << ((start) - (end) + 1)) - 1) << (end))
 #define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end))
diff --git a/drivers/gpu/drm/gma500/oaktrail_device.c b/drivers/gpu/drm/gma500/oaktrail_device.c
index 08747fd7105c..7a9ce000fd86 100644
--- a/drivers/gpu/drm/gma500/oaktrail_device.c
+++ b/drivers/gpu/drm/gma500/oaktrail_device.c
@@ -26,7 +26,7 @@
 #include "psb_drv.h"
 #include "psb_reg.h"
 #include "psb_intel_reg.h"
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
 #include <asm/intel_scu_ipc.h>
 #include "mid_bios.h"
 #include "intel_bios.h"
diff --git a/drivers/gpu/drm/gma500/oaktrail_lvds.c b/drivers/gpu/drm/gma500/oaktrail_lvds.c
index e77d7214fca4..3ece553311fe 100644
--- a/drivers/gpu/drm/gma500/oaktrail_lvds.c
+++ b/drivers/gpu/drm/gma500/oaktrail_lvds.c
@@ -22,7 +22,7 @@
 
 #include <linux/i2c.h>
 #include <drm/drmP.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
 
 #include "intel_bios.h"
 #include "psb_drv.h"
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 9215ed72bece..5f8f6c91596c 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -25,7 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/sfi.h>
 #include <linux/module.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
 #include <asm/intel_scu_ipc.h>
 
 /* IPC defines the following message types */
diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c
index 578baf9d9725..315209d9b407 100644
--- a/drivers/rtc/rtc-mrst.c
+++ b/drivers/rtc/rtc-mrst.c
@@ -38,8 +38,8 @@
 
 #include <asm-generic/rtc.h>
 #include <asm/intel_scu_ipc.h>
-#include <asm/mrst.h>
-#include <asm/mrst-vrtc.h>
+#include <asm/intel-mid.h>
+#include <asm/intel_mid_vrtc.h>
 
 struct mrst_rtc {
 	struct rtc_device	*rtc;
diff --git a/drivers/watchdog/intel_scu_watchdog.c b/drivers/watchdog/intel_scu_watchdog.c
index 9dda2d08af91..07964d82123a 100644
--- a/drivers/watchdog/intel_scu_watchdog.c
+++ b/drivers/watchdog/intel_scu_watchdog.c
@@ -48,7 +48,7 @@
 #include <linux/atomic.h>
 #include <asm/intel_scu_ipc.h>
 #include <asm/apb_timer.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
 
 #include "intel_scu_watchdog.h"
 
-- 
cgit v1.2.3


From 6c21b176a93ffaa8023555107167379ccdc6b71f Mon Sep 17 00:00:00 2001
From: Fengguang Wu
Date: Thu, 17 Oct 2013 15:35:28 -0700
Subject: pci: intel_mid: Return true/false in function returning bool

Function 'type1_access_ok' should return bool value, not 0/1.
This patch changes 'return 0/1' to 'return false/true'.

Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-5-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/pci/intel_mid_pci.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
index f8715f7c43c7..c5ca5b997f5a 100644
--- a/arch/x86/pci/intel_mid_pci.c
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -150,12 +150,12 @@ static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
 	 * shim. Therefore, use the header type in shim instead.
 	 */
 	if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE)
-		return 0;
+		return false;
 	if (bus == 0 && (devfn == PCI_DEVFN(2, 0)
 				|| devfn == PCI_DEVFN(0, 0)
 				|| devfn == PCI_DEVFN(3, 0)))
-		return 1;
-	return 0; /* Langwell on others */
+		return true;
+	return false; /* Langwell on others */
 }
 
 static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
-- 
cgit v1.2.3


From 712b6aa8731a7e148298c58cea66a5209c659e3c Mon Sep 17 00:00:00 2001
From: Kuppuswamy Sathyanarayanan
Date: Thu, 17 Oct 2013 15:35:29 -0700
Subject: intel_mid: Renamed *mrst* to *intel_mid*

mrst is used as common name to represent all intel_mid type
soc's. But moorsetwon is just one of the intel_mid soc. So
renamed them to use intel_mid.

This patch mainly renames the variables and related
functions that uses *mrst* prefix with *intel_mid*.

To ensure that there are no functional changes, I have compared
the objdump of related files before and after rename and found
the only difference is symbol and name changes.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-6-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 Documentation/kernel-parameters.txt                |   6 +-
 arch/x86/include/asm/intel-mid.h                   |  26 ++---
 arch/x86/include/asm/setup.h                       |   4 +-
 arch/x86/include/uapi/asm/bootparam.h              |   2 +-
 arch/x86/kernel/apb_timer.c                        |   8 +-
 arch/x86/kernel/head32.c                           |   4 +-
 arch/x86/kernel/rtc.c                              |   2 +-
 arch/x86/pci/intel_mid_pci.c                       |  12 +--
 .../platform/intel-mid/early_printk_intel_mid.c    |   2 +-
 arch/x86/platform/intel-mid/intel-mid.c            | 109 ++++++++++-----------
 arch/x86/platform/intel-mid/intel_mid_vrtc.c       |   8 +-
 drivers/platform/x86/intel_scu_ipc.c               |   2 +-
 drivers/watchdog/intel_scu_watchdog.c              |   2 +-
 13 files changed, 93 insertions(+), 94 deletions(-)

(limited to 'arch')

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index fcbb736d55fe..dfaeb0c65f88 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3471,11 +3471,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			default x2apic cluster mode on platforms
 			supporting x2apic.
 
-	x86_mrst_timer= [X86-32,APBT]
-			Choose timer option for x86 Moorestown MID platform.
+	x86_intel_mid_timer= [X86-32,APBT]
+			Choose timer option for x86 Intel MID platform.
 			Two valid options are apbt timer only and lapic timer
 			plus one apbt timer for broadcast timer.
-			x86_mrst_timer=apbt_only | lapic_and_apbt
+			x86_intel_mid_timer=apbt_only | lapic_and_apbt
 
 	xen_emul_unplug=		[HW,X86,XEN]
 			Unplug Xen emulated devices
diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
index cc79a4f7aeed..beb7a5f1862a 100644
--- a/arch/x86/include/asm/intel-mid.h
+++ b/arch/x86/include/asm/intel-mid.h
@@ -13,7 +13,7 @@
 
 #include <linux/sfi.h>
 
-extern int pci_mrst_init(void);
+extern int intel_mid_pci_init(void);
 extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
 extern int sfi_mrtc_num;
 extern struct sfi_rtc_table_entry sfi_mrtc_array[];
@@ -25,33 +25,33 @@ extern struct sfi_rtc_table_entry sfi_mrtc_array[];
  * we treat Medfield/Penwell as a variant of Moorestown. Penwell can be
  * identified via MSRs.
  */
-enum mrst_cpu_type {
+enum intel_mid_cpu_type {
 	/* 1 was Moorestown */
-	MRST_CPU_CHIP_PENWELL = 2,
+	INTEL_MID_CPU_CHIP_PENWELL = 2,
 };
 
-extern enum mrst_cpu_type __mrst_cpu_chip;
+extern enum intel_mid_cpu_type __intel_mid_cpu_chip;
 
 #ifdef CONFIG_X86_INTEL_MID
 
-static inline enum mrst_cpu_type mrst_identify_cpu(void)
+static inline enum intel_mid_cpu_type intel_mid_identify_cpu(void)
 {
-	return __mrst_cpu_chip;
+	return __intel_mid_cpu_chip;
 }
 
 #else /* !CONFIG_X86_INTEL_MID */
 
-#define mrst_identify_cpu()    (0)
+#define intel_mid_identify_cpu()    (0)
 
 #endif /* !CONFIG_X86_INTEL_MID */
 
-enum mrst_timer_options {
-	MRST_TIMER_DEFAULT,
-	MRST_TIMER_APBT_ONLY,
-	MRST_TIMER_LAPIC_APBT,
+enum intel_mid_timer_options {
+	INTEL_MID_TIMER_DEFAULT,
+	INTEL_MID_TIMER_APBT_ONLY,
+	INTEL_MID_TIMER_LAPIC_APBT,
 };
 
-extern enum mrst_timer_options mrst_timer_options;
+extern enum intel_mid_timer_options intel_mid_timer_options;
 
 /*
  * Penwell uses spread spectrum clock, so the freq number is not exactly
@@ -76,6 +76,6 @@ extern void intel_scu_devices_destroy(void);
 #define MRST_VRTC_MAP_SZ	(1024)
 /*#define MRST_VRTC_PGOFFSET	(0xc00) */
 
-extern void mrst_rtc_init(void);
+extern void intel_mid_rtc_init(void);
 
 #endif /* _ASM_X86_INTEL_MID_H */
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 347555492dad..59bcf4e22418 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -51,9 +51,9 @@ extern void i386_reserve_resources(void);
 extern void setup_default_timer_irq(void);
 
 #ifdef CONFIG_X86_INTEL_MID
-extern void x86_mrst_early_setup(void);
+extern void x86_intel_mid_early_setup(void);
 #else
-static inline void x86_mrst_early_setup(void) { }
+static inline void x86_intel_mid_early_setup(void) { }
 #endif
 
 #ifdef CONFIG_X86_INTEL_CE
diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h
index c15ddaf90710..9c3733c5f8f7 100644
--- a/arch/x86/include/uapi/asm/bootparam.h
+++ b/arch/x86/include/uapi/asm/bootparam.h
@@ -158,7 +158,7 @@ enum {
 	X86_SUBARCH_PC = 0,
 	X86_SUBARCH_LGUEST,
 	X86_SUBARCH_XEN,
-	X86_SUBARCH_MRST,
+	X86_SUBARCH_INTEL_MID,
 	X86_SUBARCH_CE4100,
 	X86_NR_SUBARCHS,
 };
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index 915483604c0c..af5b08ab3b71 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -157,13 +157,13 @@ static int __init apbt_clockevent_register(void)
 
 	adev->num = smp_processor_id();
 	adev->timer = dw_apb_clockevent_init(smp_processor_id(), "apbt0",
-		mrst_timer_options == MRST_TIMER_LAPIC_APBT ?
+		intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT ?
 		APBT_CLOCKEVENT_RATING - 100 : APBT_CLOCKEVENT_RATING,
 		adev_virt_addr(adev), 0, apbt_freq);
 	/* Firmware does EOI handling for us. */
 	adev->timer->eoi = NULL;
 
-	if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) {
+	if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT) {
 		global_clock_event = &adev->timer->ced;
 		printk(KERN_DEBUG "%s clockevent registered as global\n",
 		       global_clock_event->name);
@@ -253,7 +253,7 @@ static int apbt_cpuhp_notify(struct notifier_block *n,
 
 static __init int apbt_late_init(void)
 {
-	if (mrst_timer_options == MRST_TIMER_LAPIC_APBT ||
+	if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT ||
 		!apb_timer_block_enabled)
 		return 0;
 	/* This notifier should be called after workqueue is ready */
@@ -340,7 +340,7 @@ void __init apbt_time_init(void)
 	}
 #ifdef CONFIG_SMP
 	/* kernel cmdline disable apb timer, so we will use lapic timers */
-	if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) {
+	if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT) {
 		printk(KERN_INFO "apbt: disabled per cpu timer\n");
 		return;
 	}
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 06f87bece92a..c61a14a4a310 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -35,8 +35,8 @@ asmlinkage void __init i386_start_kernel(void)
 
 	/* Call the subarch specific early setup function */
 	switch (boot_params.hdr.hardware_subarch) {
-	case X86_SUBARCH_MRST:
-		x86_mrst_early_setup();
+	case X86_SUBARCH_INTEL_MID:
+		x86_intel_mid_early_setup();
 		break;
 	case X86_SUBARCH_CE4100:
 		x86_ce4100_early_setup();
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index a1b52fe77995..e35cb18b8a00 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -189,7 +189,7 @@ static __init int add_rtc_cmos(void)
 		return 0;
 
 	/* Intel MID platforms don't have ioport rtc */
-	if (mrst_identify_cpu())
+	if (intel_mid_identify_cpu())
 		return -ENODEV;
 
 	platform_device_register(&rtc_device);
diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
index c5ca5b997f5a..51384ca727ad 100644
--- a/arch/x86/pci/intel_mid_pci.c
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -205,7 +205,7 @@ static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
 			       where, size, value);
 }
 
-static int mrst_pci_irq_enable(struct pci_dev *dev)
+static int intel_mid_pci_irq_enable(struct pci_dev *dev)
 {
 	u8 pin;
 	struct io_apic_irq_attr irq_attr;
@@ -225,23 +225,23 @@ static int mrst_pci_irq_enable(struct pci_dev *dev)
 	return 0;
 }
 
-struct pci_ops pci_mrst_ops = {
+struct pci_ops intel_mid_pci_ops = {
 	.read = pci_read,
 	.write = pci_write,
 };
 
 /**
- * pci_mrst_init - installs pci_mrst_ops
+ * intel_mid_pci_init - installs intel_mid_pci_ops
  *
  * Moorestown has an interesting PCI implementation (see above).
  * Called when the early platform detection installs it.
  */
-int __init pci_mrst_init(void)
+int __init intel_mid_pci_init(void)
 {
 	pr_info("Intel MID platform detected, using MID PCI ops\n");
 	pci_mmcfg_late_init();
-	pcibios_enable_irq = mrst_pci_irq_enable;
-	pci_root_ops = pci_mrst_ops;
+	pcibios_enable_irq = intel_mid_pci_irq_enable;
+	pci_root_ops = intel_mid_pci_ops;
 	pci_soc_mode = 1;
 	/* Continue with standard init */
 	return 1;
diff --git a/arch/x86/platform/intel-mid/early_printk_intel_mid.c b/arch/x86/platform/intel-mid/early_printk_intel_mid.c
index 7c56e706fbee..4f702f554f6e 100644
--- a/arch/x86/platform/intel-mid/early_printk_intel_mid.c
+++ b/arch/x86/platform/intel-mid/early_printk_intel_mid.c
@@ -152,7 +152,7 @@ void mrst_early_console_init(void)
 	spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9;
 	freq = 100000000 / (spi0_cdiv + 1);
 
-	if (mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL)
+	if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL)
 		mrst_spi_paddr = MRST_REGBASE_SPI1;
 
 	pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 7e6d7b204a05..94689ac55374 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -11,7 +11,7 @@
  * of the License.
  */
 
-#define pr_fmt(fmt) "mrst: " fmt
+#define pr_fmt(fmt) "intel_mid: " fmt
 
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -47,7 +47,7 @@
 
 /*
  * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock,
- * cmdline option x86_mrst_timer can be used to override the configuration
+ * cmdline option x86_intel_mid_timer can be used to override the configuration
  * to prefer one or the other.
  * at runtime, there are basically three timer configurations:
  * 1. per cpu apbt clock only
@@ -66,12 +66,12 @@
  * lapic (always-on,ARAT) ------ 150
  */
 
-enum mrst_timer_options mrst_timer_options;
+enum intel_mid_timer_options intel_mid_timer_options;
 
 static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
 static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
-enum mrst_cpu_type __mrst_cpu_chip;
-EXPORT_SYMBOL_GPL(__mrst_cpu_chip);
+enum intel_mid_cpu_type __intel_mid_cpu_chip;
+EXPORT_SYMBOL_GPL(__intel_mid_cpu_chip);
 
 int sfi_mtimer_num;
 
@@ -79,11 +79,11 @@ struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
 EXPORT_SYMBOL_GPL(sfi_mrtc_array);
 int sfi_mrtc_num;
 
-static void mrst_power_off(void)
+static void intel_mid_power_off(void)
 {
 }
 
-static void mrst_reboot(void)
+static void intel_mid_reboot(void)
 {
 	intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
 }
@@ -196,7 +196,7 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table)
 	return 0;
 }
 
-static unsigned long __init mrst_calibrate_tsc(void)
+static unsigned long __init intel_mid_calibrate_tsc(void)
 {
 	unsigned long fast_calibrate;
 	u32 lo, hi, ratio, fsb;
@@ -227,13 +227,13 @@ static unsigned long __init mrst_calibrate_tsc(void)
 	return 0;
 }
 
-static void __init mrst_time_init(void)
+static void __init intel_mid_time_init(void)
 {
 	sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
-	switch (mrst_timer_options) {
-	case MRST_TIMER_APBT_ONLY:
+	switch (intel_mid_timer_options) {
+	case INTEL_MID_TIMER_APBT_ONLY:
 		break;
-	case MRST_TIMER_LAPIC_APBT:
+	case INTEL_MID_TIMER_LAPIC_APBT:
 		x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
 		x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
 		break;
@@ -249,19 +249,19 @@ static void __init mrst_time_init(void)
 	apbt_time_init();
 }
 
-static void mrst_arch_setup(void)
+static void __cpuinit intel_mid_arch_setup(void)
 {
 	if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
-		__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
+		__intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_PENWELL;
 	else {
 		pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n",
 			boot_cpu_data.x86, boot_cpu_data.x86_model);
-		__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
+		__intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_PENWELL;
 	}
 }
 
 /* MID systems don't have i8042 controller */
-static int mrst_i8042_detect(void)
+static int intel_mid_i8042_detect(void)
 {
 	return 0;
 }
@@ -272,7 +272,7 @@ static int mrst_i8042_detect(void)
  * watchdog or lock debug. Reading io port 0x61 results in 0xff which
  * misled NMI handler.
  */
-static unsigned char mrst_get_nmi_reason(void)
+static unsigned char intel_mid_get_nmi_reason(void)
 {
 	return 0;
 }
@@ -281,33 +281,32 @@ static unsigned char mrst_get_nmi_reason(void)
  * Moorestown specific x86_init function overrides and early setup
  * calls.
  */
-void __init x86_mrst_early_setup(void)
+void __init x86_intel_mid_early_setup(void)
 {
 	x86_init.resources.probe_roms = x86_init_noop;
 	x86_init.resources.reserve_resources = x86_init_noop;
 
-	x86_init.timers.timer_init = mrst_time_init;
+	x86_init.timers.timer_init = intel_mid_time_init;
 	x86_init.timers.setup_percpu_clockev = x86_init_noop;
 
 	x86_init.irqs.pre_vector_init = x86_init_noop;
 
-	x86_init.oem.arch_setup = mrst_arch_setup;
+	x86_init.oem.arch_setup = intel_mid_arch_setup;
 
 	x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock;
 
-	x86_platform.calibrate_tsc = mrst_calibrate_tsc;
-	x86_platform.i8042_detect = mrst_i8042_detect;
-	x86_init.timers.wallclock_init = mrst_rtc_init;
-	x86_platform.get_nmi_reason = mrst_get_nmi_reason;
+	x86_platform.calibrate_tsc = intel_mid_calibrate_tsc;
+	x86_platform.i8042_detect = intel_mid_i8042_detect;
+	x86_init.timers.wallclock_init = intel_mid_rtc_init;
+	x86_platform.get_nmi_reason = intel_mid_get_nmi_reason;
 
-	x86_init.pci.init = pci_mrst_init;
+	x86_init.pci.init = intel_mid_pci_init;
 	x86_init.pci.fixup_irqs = x86_init_noop;
 
 	legacy_pic = &null_legacy_pic;
 
-	/* Moorestown specific power_off/restart method */
-	pm_power_off = mrst_power_off;
-	machine_ops.emergency_restart  = mrst_reboot;
+	pm_power_off = intel_mid_power_off;
+	machine_ops.emergency_restart  = intel_mid_reboot;
 
 	/* Avoid searching for BIOS MP tables */
 	x86_init.mpparse.find_smp_config = x86_init_noop;
@@ -319,24 +318,24 @@ void __init x86_mrst_early_setup(void)
  * if user does not want to use per CPU apb timer, just give it a lower rating
  * than local apic timer and skip the late per cpu timer init.
  */
-static inline int __init setup_x86_mrst_timer(char *arg)
+static inline int __init setup_x86_intel_mid_timer(char *arg)
 {
 	if (!arg)
 		return -EINVAL;
 
 	if (strcmp("apbt_only", arg) == 0)
-		mrst_timer_options = MRST_TIMER_APBT_ONLY;
+		intel_mid_timer_options = INTEL_MID_TIMER_APBT_ONLY;
 	else if (strcmp("lapic_and_apbt", arg) == 0)
-		mrst_timer_options = MRST_TIMER_LAPIC_APBT;
+		intel_mid_timer_options = INTEL_MID_TIMER_LAPIC_APBT;
 	else {
-		pr_warn("X86 MRST timer option %s not recognised"
-			   " use x86_mrst_timer=apbt_only or lapic_and_apbt\n",
+		pr_warn("X86 INTEL_MID timer option %s not recognised"
+			   " use x86_intel_mid_timer=apbt_only or lapic_and_apbt\n",
 			   arg);
 		return -EINVAL;
 	}
 	return 0;
 }
-__setup("x86_mrst_timer=", setup_x86_mrst_timer);
+__setup("x86_intel_mid_timer=", setup_x86_intel_mid_timer);
 
 /*
  * Parsing GPIO table first, since the DEVS table will need this table
@@ -400,7 +399,7 @@ struct devs_id {
 };
 
 /* the offset for the mapping of global gpio pin to irq */
-#define MRST_IRQ_OFFSET 0x100
+#define INTEL_MID_IRQ_OFFSET 0x100
 
 static void __init *pmic_gpio_platform_data(void *info)
 {
@@ -410,7 +409,7 @@ static void __init *pmic_gpio_platform_data(void *info)
 	if (gpio_base == -1)
 		gpio_base = 64;
 	pmic_gpio_pdata.gpio_base = gpio_base;
-	pmic_gpio_pdata.irq_base = gpio_base + MRST_IRQ_OFFSET;
+	pmic_gpio_pdata.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
 	pmic_gpio_pdata.gpiointr = 0xffffeff8;
 
 	return &pmic_gpio_pdata;
@@ -424,7 +423,7 @@ static void __init *max3111_platform_data(void *info)
 	spi_info->mode = SPI_MODE_0;
 	if (intr == -1)
 		return NULL;
-	spi_info->irq = intr + MRST_IRQ_OFFSET;
+	spi_info->irq = intr + INTEL_MID_IRQ_OFFSET;
 	return NULL;
 }
 
@@ -464,8 +463,8 @@ static void __init *max7315_platform_data(void *info)
 		return NULL;
 	max7315->gpio_base = gpio_base;
 	if (intr != -1) {
-		i2c_info->irq = intr + MRST_IRQ_OFFSET;
-		max7315->irq_base = gpio_base + MRST_IRQ_OFFSET;
+		i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+		max7315->irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
 	} else {
 		i2c_info->irq = -1;
 		max7315->irq_base = -1;
@@ -492,8 +491,8 @@ static void *tca6416_platform_data(void *info)
 		return NULL;
 	tca6416.gpio_base = gpio_base;
 	if (intr != -1) {
-		i2c_info->irq = intr + MRST_IRQ_OFFSET;
-		tca6416.irq_base = gpio_base + MRST_IRQ_OFFSET;
+		i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+		tca6416.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
 	} else {
 		i2c_info->irq = -1;
 		tca6416.irq_base = -1;
@@ -509,7 +508,7 @@ static void *mpu3050_platform_data(void *info)
 	if (intr == -1)
 		return NULL;
 
-	i2c_info->irq = intr + MRST_IRQ_OFFSET;
+	i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
 	return NULL;
 }
 
@@ -523,8 +522,8 @@ static void __init *emc1403_platform_data(void *info)
 	if (intr == -1 || intr2nd == -1)
 		return NULL;
 
-	i2c_info->irq = intr + MRST_IRQ_OFFSET;
-	intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
+	i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+	intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET;
 
 	return &intr2nd_pdata;
 }
@@ -539,8 +538,8 @@ static void __init *lis331dl_platform_data(void *info)
 	if (intr == -1 || intr2nd == -1)
 		return NULL;
 
-	i2c_info->irq = intr + MRST_IRQ_OFFSET;
-	intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
+	i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+	intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET;
 
 	return &intr2nd_pdata;
 }
@@ -570,9 +569,9 @@ static struct platform_device msic_device = {
 	.resource	= msic_resources,
 };
 
-static inline bool mrst_has_msic(void)
+static inline bool intel_mid_has_msic(void)
 {
-	return mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL;
+	return intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL;
 }
 
 static int msic_scu_status_change(struct notifier_block *nb,
@@ -596,7 +595,7 @@ static int __init msic_init(void)
 	 * We need to be sure that the SCU IPC is ready before MSIC device
 	 * can be registered.
 	 */
-	if (mrst_has_msic())
+	if (intel_mid_has_msic())
 		intel_scu_notifier_add(&msic_scu_notifier);
 
 	return 0;
@@ -851,7 +850,7 @@ static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *entry)
 	 * On Medfield the platform device creation is handled by the MSIC
 	 * MFD driver so we don't need to do it here.
 	 */
-	if (mrst_has_msic())
+	if (intel_mid_has_msic())
 		return;
 
 	pdev = platform_device_alloc(entry->name, 0);
@@ -984,13 +983,13 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
 	return 0;
 }
 
-static int __init mrst_platform_init(void)
+static int __init intel_mid_platform_init(void)
 {
 	sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
 	sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
 	return 0;
 }
-arch_initcall(mrst_platform_init);
+arch_initcall(intel_mid_platform_init);
 
 /*
  * we will search these buttons in SFI GPIO table (by name)
@@ -1010,7 +1009,7 @@ static struct gpio_keys_button gpio_button[] = {
 	{SW_KEYPAD_SLIDE,	-1, 1, "MagSw2",	EV_SW,  0, 20},
 };
 
-static struct gpio_keys_platform_data mrst_gpio_keys = {
+static struct gpio_keys_platform_data intel_mid_gpio_keys = {
 	.buttons	= gpio_button,
 	.rep		= 1,
 	.nbuttons	= -1, /* will fill it after search */
@@ -1020,7 +1019,7 @@ static struct platform_device pb_device = {
 	.name		= "gpio-keys",
 	.id		= -1,
 	.dev		= {
-		.platform_data	= &mrst_gpio_keys,
+		.platform_data	= &intel_mid_gpio_keys,
 	},
 };
 
@@ -1047,7 +1046,7 @@ static int __init pb_keys_init(void)
 	}
 
 	if (good) {
-		mrst_gpio_keys.nbuttons = good;
+		intel_mid_gpio_keys.nbuttons = good;
 		return platform_device_register(&pb_device);
 	}
 	return 0;
diff --git a/arch/x86/platform/intel-mid/intel_mid_vrtc.c b/arch/x86/platform/intel-mid/intel_mid_vrtc.c
index ded9fbd81996..4762cff7facd 100644
--- a/arch/x86/platform/intel-mid/intel_mid_vrtc.c
+++ b/arch/x86/platform/intel-mid/intel_mid_vrtc.c
@@ -116,7 +116,7 @@ int vrtc_set_mmss(const struct timespec *now)
 	return retval;
 }
 
-void __init mrst_rtc_init(void)
+void __init intel_mid_rtc_init(void)
 {
 	unsigned long vrtc_paddr;
 
@@ -154,10 +154,10 @@ static struct platform_device vrtc_device = {
 };
 
 /* Register the RTC device if appropriate */
-static int __init mrst_device_create(void)
+static int __init intel_mid_device_create(void)
 {
 	/* No Moorestown, no device */
-	if (!mrst_identify_cpu())
+	if (!intel_mid_identify_cpu())
 		return -ENODEV;
 	/* No timer, no device */
 	if (!sfi_mrtc_num)
@@ -174,4 +174,4 @@ static int __init mrst_device_create(void)
 	return platform_device_register(&vrtc_device);
 }
 
-module_init(mrst_device_create);
+module_init(intel_mid_device_create);
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 5f8f6c91596c..d654f831410d 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -579,7 +579,7 @@ static struct pci_driver ipc_driver = {
 
 static int __init intel_scu_ipc_init(void)
 {
-	platform = mrst_identify_cpu();
+	platform = intel_mid_identify_cpu();
 	if (platform == 0)
 		return -ENODEV;
 	return  pci_register_driver(&ipc_driver);
diff --git a/drivers/watchdog/intel_scu_watchdog.c b/drivers/watchdog/intel_scu_watchdog.c
index 07964d82123a..8ced25613956 100644
--- a/drivers/watchdog/intel_scu_watchdog.c
+++ b/drivers/watchdog/intel_scu_watchdog.c
@@ -445,7 +445,7 @@ static int __init intel_scu_watchdog_init(void)
 	 *
 	 * If it isn't an intel MID device then it doesn't have this watchdog
 	 */
-	if (!mrst_identify_cpu())
+	if (!intel_mid_identify_cpu())
 		return -ENODEV;
 
 	/* Check boot parameters to verify that their initial values */
-- 
cgit v1.2.3


From 661b01076500e364c68dd9fdf0ef4216a75e8375 Mon Sep 17 00:00:00 2001
From: Kuppuswamy Sathyanarayanan
Date: Thu, 17 Oct 2013 15:35:30 -0700
Subject: intel_mid: Refactored sfi_parse_devs() function

SFI device_id[] table parsing code is duplicated in every SFI
device handler. This patch removes this code duplication, by
adding a seperate function get_device_id() to parse through the
device table. Also this patch moves the SPI, I2C, IPC info code from
sfi_parse_devs() to respective device handlers.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-7-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/platform/intel-mid/intel-mid.c | 141 ++++++++++++++++----------------
 1 file changed, 71 insertions(+), 70 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 94689ac55374..d24c729b24ad 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -831,20 +831,15 @@ static void __init install_irq_resource(struct platform_device *pdev, int irq)
 	platform_device_add_resources(pdev, &res, 1);
 }
 
-static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *entry)
+static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry,
+					struct devs_id *dev)
 {
-	const struct devs_id *dev = device_ids;
 	struct platform_device *pdev;
 	void *pdata = NULL;
 
-	while (dev->name[0]) {
-		if (dev->type == SFI_DEV_TYPE_IPC &&
-			!strncmp(dev->name, entry->name, SFI_NAME_LEN)) {
-			pdata = dev->get_platform_data(entry);
-			break;
-		}
-		dev++;
-	}
+	pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
+		pentry->name, pentry->irq);
+	pdata = dev->get_platform_data(pentry);
 
 	/*
 	 * On Medfield the platform device creation is handled by the MSIC
@@ -853,68 +848,94 @@ static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *entry)
 	if (intel_mid_has_msic())
 		return;
 
-	pdev = platform_device_alloc(entry->name, 0);
+	pdev = platform_device_alloc(pentry->name, 0);
 	if (pdev == NULL) {
 		pr_err("out of memory for SFI platform device '%s'.\n",
-			entry->name);
+			pentry->name);
 		return;
 	}
-	install_irq_resource(pdev, entry->irq);
+	install_irq_resource(pdev, pentry->irq);
 
 	pdev->dev.platform_data = pdata;
 	intel_scu_device_register(pdev);
 }
 
-static void __init sfi_handle_spi_dev(struct spi_board_info *spi_info)
+static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry,
+					struct devs_id *dev)
 {
-	const struct devs_id *dev = device_ids;
+	struct spi_board_info spi_info;
 	void *pdata = NULL;
 
-	while (dev->name[0]) {
-		if (dev->type == SFI_DEV_TYPE_SPI &&
-			!strncmp(dev->name, spi_info->modalias,
-						SFI_NAME_LEN)) {
-			pdata = dev->get_platform_data(spi_info);
-			break;
-		}
-		dev++;
-	}
-	spi_info->platform_data = pdata;
+	memset(&spi_info, 0, sizeof(spi_info));
+	strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
+	spi_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
+	spi_info.bus_num = pentry->host_num;
+	spi_info.chip_select = pentry->addr;
+	spi_info.max_speed_hz = pentry->max_freq;
+	pr_debug("SPI bus=%d, name=%16.16s, irq=0x%2x, max_freq=%d, cs=%d\n",
+		spi_info.bus_num,
+		spi_info.modalias,
+		spi_info.irq,
+		spi_info.max_speed_hz,
+		spi_info.chip_select);
+
+	pdata = dev->get_platform_data(&spi_info);
+
+	spi_info.platform_data = pdata;
 	if (dev->delay)
-		intel_scu_spi_device_register(spi_info);
+		intel_scu_spi_device_register(&spi_info);
 	else
-		spi_register_board_info(spi_info, 1);
+		spi_register_board_info(&spi_info, 1);
 }
 
-static void __init sfi_handle_i2c_dev(int bus, struct i2c_board_info *i2c_info)
+static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry,
+					struct devs_id *dev)
 {
-	const struct devs_id *dev = device_ids;
+	struct i2c_board_info i2c_info;
 	void *pdata = NULL;
 
+	memset(&i2c_info, 0, sizeof(i2c_info));
+	strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
+	i2c_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
+	i2c_info.addr = pentry->addr;
+	pr_debug("I2C bus = %d, name = %16.16s, irq = 0x%2x, addr = 0x%x\n",
+		pentry->host_num,
+		i2c_info.type,
+		i2c_info.irq,
+		i2c_info.addr);
+	pdata = dev->get_platform_data(&i2c_info);
+	i2c_info.platform_data = pdata;
+
+	if (dev->delay)
+		intel_scu_i2c_device_register(pentry->host_num, &i2c_info);
+	else
+		i2c_register_board_info(pentry->host_num, &i2c_info, 1);
+}
+
+static struct devs_id __init *get_device_id(u8 type, char *name)
+{
+	struct devs_id *dev = device_ids;
+
+	if (device_ids == NULL)
+		return NULL;
+
 	while (dev->name[0]) {
-		if (dev->type == SFI_DEV_TYPE_I2C &&
-			!strncmp(dev->name, i2c_info->type, SFI_NAME_LEN)) {
-			pdata = dev->get_platform_data(i2c_info);
-			break;
+		if (dev->type == type &&
+			!strncmp(dev->name, name, SFI_NAME_LEN)) {
+			return dev;
 		}
 		dev++;
 	}
-	i2c_info->platform_data = pdata;
 
-	if (dev->delay)
-		intel_scu_i2c_device_register(bus, i2c_info);
-	else
-		i2c_register_board_info(bus, i2c_info, 1);
+	return NULL;
 }
 
-
 static int __init sfi_parse_devs(struct sfi_table_header *table)
 {
 	struct sfi_table_simple *sb;
 	struct sfi_device_table_entry *pentry;
-	struct spi_board_info spi_info;
-	struct i2c_board_info i2c_info;
-	int num, i, bus;
+	struct devs_id *dev = NULL;
+	int num, i;
 	int ioapic;
 	struct io_apic_irq_attr irq_attr;
 
@@ -939,40 +960,20 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
 		} else
 			irq = 0; /* No irq */
 
+		dev = get_device_id(pentry->type, pentry->name);
+
+		if ((dev == NULL) || (dev->get_platform_data == NULL))
+			continue;
+
 		switch (pentry->type) {
 		case SFI_DEV_TYPE_IPC:
-			pr_debug("info[%2d]: IPC bus, name = %16.16s, "
-				"irq = 0x%2x\n", i, pentry->name, pentry->irq);
-			sfi_handle_ipc_dev(pentry);
+			sfi_handle_ipc_dev(pentry, dev);
 			break;
 		case SFI_DEV_TYPE_SPI:
-			memset(&spi_info, 0, sizeof(spi_info));
-			strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
-			spi_info.irq = irq;
-			spi_info.bus_num = pentry->host_num;
-			spi_info.chip_select = pentry->addr;
-			spi_info.max_speed_hz = pentry->max_freq;
-			pr_debug("info[%2d]: SPI bus = %d, name = %16.16s, "
-				"irq = 0x%2x, max_freq = %d, cs = %d\n", i,
-				spi_info.bus_num,
-				spi_info.modalias,
-				spi_info.irq,
-				spi_info.max_speed_hz,
-				spi_info.chip_select);
-			sfi_handle_spi_dev(&spi_info);
+			sfi_handle_spi_dev(pentry, dev);
 			break;
 		case SFI_DEV_TYPE_I2C:
-			memset(&i2c_info, 0, sizeof(i2c_info));
-			bus = pentry->host_num;
-			strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
-			i2c_info.irq = irq;
-			i2c_info.addr = pentry->addr;
-			pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, "
-				"irq = 0x%2x, addr = 0x%x\n", i, bus,
-				i2c_info.type,
-				i2c_info.irq,
-				i2c_info.addr);
-			sfi_handle_i2c_dev(bus, &i2c_info);
+			sfi_handle_i2c_dev(pentry, dev);
 			break;
 		case SFI_DEV_TYPE_UART:
 		case SFI_DEV_TYPE_HSI:
-- 
cgit v1.2.3


From 3fd79ae4275001f293dbd170479e89df6c433226 Mon Sep 17 00:00:00 2001
From: Kuppuswamy Sathyanarayanan
Date: Thu, 17 Oct 2013 15:35:31 -0700
Subject: intel_mid: Added custom device_handler support

This patch provides a means to add custom handler for
SFI devices. If you set device_handler as NULL in
device_id table standard SFI device handler will be used.
If its not NULL custom handler will be called.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-8-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/platform/intel-mid/intel-mid.c | 74 ++++++++++++++++++---------------
 1 file changed, 40 insertions(+), 34 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index d24c729b24ad..7bfd7847a7a6 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -396,6 +396,9 @@ struct devs_id {
 	u8 type;
 	u8 delay;
 	void *(*get_platform_data)(void *info);
+	/* Custom handler for devices */
+	void (*device_handler)(struct sfi_device_table_entry *pentry,
+				struct devs_id *dev);
 };
 
 /* the offset for the mapping of global gpio pin to irq */
@@ -690,28 +693,27 @@ static void *tc35876x_platform_data(void *data)
 }
 
 static const struct devs_id __initconst device_ids[] = {
-	{"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data},
-	{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
-	{"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data},
-	{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
-	{"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
-	{"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
-	{"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data},
-	{"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data},
-	{"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data},
-	{"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
-	{"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data},
-	{"i2c_disp_brig", SFI_DEV_TYPE_I2C, 0, &tc35876x_platform_data},
+	{"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data, NULL},
+	{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data, NULL},
+	{"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data, NULL},
+	{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data, NULL},
+	{"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data, NULL},
+	{"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data, NULL},
+	{"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data, NULL},
+	{"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data, NULL},
+	{"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data, NULL},
+	{"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data, NULL},
+	{"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data, NULL},
+	{"i2c_disp_brig", SFI_DEV_TYPE_I2C, 0, &tc35876x_platform_data, NULL},
 
 	/* MSIC subdevices */
-	{"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data},
-	{"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data},
-	{"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data},
-	{"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data},
-	{"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data},
-	{"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data},
-
-	{},
+	{"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data, NULL},
+	{"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data, NULL},
+	{"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data, NULL},
+	{"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data, NULL},
+	{"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data, NULL},
+	{"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data, NULL},
+	{ 0 }
 };
 
 #define MAX_IPCDEVS	24
@@ -965,20 +967,24 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
 		if ((dev == NULL) || (dev->get_platform_data == NULL))
 			continue;
 
-		switch (pentry->type) {
-		case SFI_DEV_TYPE_IPC:
-			sfi_handle_ipc_dev(pentry, dev);
-			break;
-		case SFI_DEV_TYPE_SPI:
-			sfi_handle_spi_dev(pentry, dev);
-			break;
-		case SFI_DEV_TYPE_I2C:
-			sfi_handle_i2c_dev(pentry, dev);
-			break;
-		case SFI_DEV_TYPE_UART:
-		case SFI_DEV_TYPE_HSI:
-		default:
-			;
+		if (dev->device_handler) {
+			dev->device_handler(pentry, dev);
+		} else {
+			switch (pentry->type) {
+			case SFI_DEV_TYPE_IPC:
+				sfi_handle_ipc_dev(pentry, dev);
+				break;
+			case SFI_DEV_TYPE_SPI:
+				sfi_handle_spi_dev(pentry, dev);
+				break;
+			case SFI_DEV_TYPE_I2C:
+				sfi_handle_i2c_dev(pentry, dev);
+				break;
+			case SFI_DEV_TYPE_UART:
+			case SFI_DEV_TYPE_HSI:
+			default:
+				break;
+			}
 		}
 	}
 	return 0;
-- 
cgit v1.2.3


From 49c72a0a8ad640fa6026962056eeaf85a4ce79fd Mon Sep 17 00:00:00 2001
From: Kuppuswamy Sathyanarayanan
Date: Thu, 17 Oct 2013 15:35:32 -0700
Subject: intel_mid: Added custom handler for ipc devices

Added a custom handler for medfield based ipc devices and
moved devs_id structure defintion to header file.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-9-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/intel-mid.h        | 15 ++++++
 arch/x86/platform/intel-mid/intel-mid.c | 82 ++++++++++++++++++++-------------
 2 files changed, 66 insertions(+), 31 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
index beb7a5f1862a..ad236ae45c1f 100644
--- a/arch/x86/include/asm/intel-mid.h
+++ b/arch/x86/include/asm/intel-mid.h
@@ -18,6 +18,21 @@ extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
 extern int sfi_mrtc_num;
 extern struct sfi_rtc_table_entry sfi_mrtc_array[];
 
+/*
+ * Here defines the array of devices platform data that IAFW would export
+ * through SFI "DEVS" table, we use name and type to match the device and
+ * its platform data.
+ */
+struct devs_id {
+	char name[SFI_NAME_LEN + 1];
+	u8 type;
+	u8 delay;
+	void *(*get_platform_data)(void *info);
+	/* Custom handler for devices */
+	void (*device_handler)(struct sfi_device_table_entry *pentry,
+				struct devs_id *dev);
+};
+
 /*
  * Medfield is the follow-up of Moorestown, it combines two chip solution into
  * one. Other than that it also added always-on and constant tsc and lapic
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 7bfd7847a7a6..40a3ff8e53e5 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -78,6 +78,8 @@ int sfi_mtimer_num;
 struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
 EXPORT_SYMBOL_GPL(sfi_mrtc_array);
 int sfi_mrtc_num;
+static void __init ipc_device_handler(struct sfi_device_table_entry *pentry,
+			struct devs_id *dev);
 
 static void intel_mid_power_off(void)
 {
@@ -386,21 +388,6 @@ static int get_gpio_by_name(const char *name)
 	return -1;
 }
 
-/*
- * Here defines the array of devices platform data that IAFW would export
- * through SFI "DEVS" table, we use name and type to match the device and
- * its platform data.
- */
-struct devs_id {
-	char name[SFI_NAME_LEN + 1];
-	u8 type;
-	u8 delay;
-	void *(*get_platform_data)(void *info);
-	/* Custom handler for devices */
-	void (*device_handler)(struct sfi_device_table_entry *pentry,
-				struct devs_id *dev);
-};
-
 /* the offset for the mapping of global gpio pin to irq */
 #define INTEL_MID_IRQ_OFFSET 0x100
 
@@ -695,24 +682,24 @@ static void *tc35876x_platform_data(void *data)
 static const struct devs_id __initconst device_ids[] = {
 	{"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data, NULL},
 	{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data, NULL},
-	{"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data, NULL},
+	{"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data, &ipc_device_handler},
 	{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data, NULL},
 	{"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data, NULL},
 	{"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data, NULL},
 	{"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data, NULL},
 	{"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data, NULL},
 	{"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data, NULL},
-	{"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data, NULL},
+	{"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data, &ipc_device_handler},
 	{"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data, NULL},
 	{"i2c_disp_brig", SFI_DEV_TYPE_I2C, 0, &tc35876x_platform_data, NULL},
 
 	/* MSIC subdevices */
-	{"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data, NULL},
-	{"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data, NULL},
-	{"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data, NULL},
-	{"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data, NULL},
-	{"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data, NULL},
-	{"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data, NULL},
+	{"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data, &ipc_device_handler},
+	{"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data, &ipc_device_handler},
+	{"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data, &ipc_device_handler},
+	{"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data, &ipc_device_handler},
+	{"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data, &ipc_device_handler},
+	{"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data, &ipc_device_handler},
 	{ 0 }
 };
 
@@ -843,13 +830,6 @@ static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry,
 		pentry->name, pentry->irq);
 	pdata = dev->get_platform_data(pentry);
 
-	/*
-	 * On Medfield the platform device creation is handled by the MSIC
-	 * MFD driver so we don't need to do it here.
-	 */
-	if (intel_mid_has_msic())
-		return;
-
 	pdev = platform_device_alloc(pentry->name, 0);
 	if (pdev == NULL) {
 		pr_err("out of memory for SFI platform device '%s'.\n",
@@ -859,7 +839,7 @@ static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry,
 	install_irq_resource(pdev, pentry->irq);
 
 	pdev->dev.platform_data = pdata;
-	intel_scu_device_register(pdev);
+	platform_device_add(pdev);
 }
 
 static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry,
@@ -914,6 +894,46 @@ static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry,
 		i2c_register_board_info(pentry->host_num, &i2c_info, 1);
 }
 
+static void __init ipc_device_handler(struct sfi_device_table_entry *pentry,
+				struct devs_id *dev)
+{
+	struct platform_device *pdev;
+	void *pdata = NULL;
+	static struct resource res __initdata = {
+		.name = "IRQ",
+		.flags = IORESOURCE_IRQ,
+	};
+
+	pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
+		pentry->name, pentry->irq);
+
+	/*
+	 * We need to call platform init of IPC devices to fill misc_pdata
+	 * structure. It will be used in msic_init for initialization.
+	 */
+	if (dev != NULL)
+		pdata = dev->get_platform_data(pentry);
+
+	/*
+	 * On Medfield the platform device creation is handled by the MSIC
+	 * MFD driver so we don't need to do it here.
+	 */
+	if (intel_mid_has_msic())
+		return;
+
+	pdev = platform_device_alloc(pentry->name, 0);
+	if (pdev == NULL) {
+		pr_err("out of memory for SFI platform device '%s'.\n",
+			pentry->name);
+		return;
+	}
+	res.start = pentry->irq;
+	platform_device_add_resources(pdev, &res, 1);
+
+	pdev->dev.platform_data = pdata;
+	intel_scu_device_register(pdev);
+}
+
 static struct devs_id __init *get_device_id(u8 type, char *name)
 {
 	struct devs_id *dev = device_ids;
-- 
cgit v1.2.3


From aeedb370e7398fb5b39185b295d36f2da0653215 Mon Sep 17 00:00:00 2001
From: Kuppuswamy Sathyanarayanan
Date: Thu, 17 Oct 2013 15:35:33 -0700
Subject: intel_mid: Moved SFI related code to sfi.c

Moved SFI specific parsing/handling code to sfi.c. This will enable us
to reuse our intel-mid code for platforms that supports firmware
interfaces other than SFI (like ACPI).

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-10-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/intel-mid.h        |   1 +
 arch/x86/platform/intel-mid/Makefile    |   2 +
 arch/x86/platform/intel-mid/intel-mid.c | 451 +----------------------------
 arch/x86/platform/intel-mid/sfi.c       | 485 ++++++++++++++++++++++++++++++++
 4 files changed, 489 insertions(+), 450 deletions(-)
 create mode 100644 arch/x86/platform/intel-mid/sfi.c

(limited to 'arch')

diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
index ad236ae45c1f..3b0e7a771cb5 100644
--- a/arch/x86/include/asm/intel-mid.h
+++ b/arch/x86/include/asm/intel-mid.h
@@ -15,6 +15,7 @@
 
 extern int intel_mid_pci_init(void);
 extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
+extern int __init sfi_parse_mtmr(struct sfi_table_header *table);
 extern int sfi_mrtc_num;
 extern struct sfi_rtc_table_entry sfi_mrtc_array[];
 
diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile
index de296358111e..b11e5b2de336 100644
--- a/arch/x86/platform/intel-mid/Makefile
+++ b/arch/x86/platform/intel-mid/Makefile
@@ -1,3 +1,5 @@
 obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o
 obj-$(CONFIG_X86_INTEL_MID)	+= intel_mid_vrtc.o
 obj-$(CONFIG_EARLY_PRINTK_INTEL_MID)	+= early_printk_intel_mid.o
+# SFI specific code
+obj-$(CONFIG_SFI) += sfi.o
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 40a3ff8e53e5..40915698b9b7 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -18,19 +18,9 @@
 #include <linux/interrupt.h>
 #include <linux/scatterlist.h>
 #include <linux/sfi.h>
-#include <linux/intel_pmic_gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/notifier.h>
-#include <linux/mfd/intel_msic.h>
-#include <linux/gpio.h>
-#include <linux/i2c/tc35876x.h>
 
 #include <asm/setup.h>
 #include <asm/mpspec_def.h>
@@ -68,19 +58,11 @@
 
 enum intel_mid_timer_options intel_mid_timer_options;
 
-static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
-static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
 enum intel_mid_cpu_type __intel_mid_cpu_chip;
 EXPORT_SYMBOL_GPL(__intel_mid_cpu_chip);
 
-int sfi_mtimer_num;
-
-struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
-EXPORT_SYMBOL_GPL(sfi_mrtc_array);
-int sfi_mrtc_num;
 static void __init ipc_device_handler(struct sfi_device_table_entry *pentry,
 			struct devs_id *dev);
-
 static void intel_mid_power_off(void)
 {
 }
@@ -90,114 +72,6 @@ static void intel_mid_reboot(void)
 	intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
 }
 
-/* parse all the mtimer info to a static mtimer array */
-static int __init sfi_parse_mtmr(struct sfi_table_header *table)
-{
-	struct sfi_table_simple *sb;
-	struct sfi_timer_table_entry *pentry;
-	struct mpc_intsrc mp_irq;
-	int totallen;
-
-	sb = (struct sfi_table_simple *)table;
-	if (!sfi_mtimer_num) {
-		sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb,
-					struct sfi_timer_table_entry);
-		pentry = (struct sfi_timer_table_entry *) sb->pentry;
-		totallen = sfi_mtimer_num * sizeof(*pentry);
-		memcpy(sfi_mtimer_array, pentry, totallen);
-	}
-
-	pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num);
-	pentry = sfi_mtimer_array;
-	for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) {
-		pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz,"
-			" irq = %d\n", totallen, (u32)pentry->phys_addr,
-			pentry->freq_hz, pentry->irq);
-			if (!pentry->irq)
-				continue;
-			mp_irq.type = MP_INTSRC;
-			mp_irq.irqtype = mp_INT;
-/* triggering mode edge bit 2-3, active high polarity bit 0-1 */
-			mp_irq.irqflag = 5;
-			mp_irq.srcbus = MP_BUS_ISA;
-			mp_irq.srcbusirq = pentry->irq;	/* IRQ */
-			mp_irq.dstapic = MP_APIC_ALL;
-			mp_irq.dstirq = pentry->irq;
-			mp_save_irq(&mp_irq);
-	}
-
-	return 0;
-}
-
-struct sfi_timer_table_entry *sfi_get_mtmr(int hint)
-{
-	int i;
-	if (hint < sfi_mtimer_num) {
-		if (!sfi_mtimer_usage[hint]) {
-			pr_debug("hint taken for timer %d irq %d\n",
-				hint, sfi_mtimer_array[hint].irq);
-			sfi_mtimer_usage[hint] = 1;
-			return &sfi_mtimer_array[hint];
-		}
-	}
-	/* take the first timer available */
-	for (i = 0; i < sfi_mtimer_num;) {
-		if (!sfi_mtimer_usage[i]) {
-			sfi_mtimer_usage[i] = 1;
-			return &sfi_mtimer_array[i];
-		}
-		i++;
-	}
-	return NULL;
-}
-
-void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr)
-{
-	int i;
-	for (i = 0; i < sfi_mtimer_num;) {
-		if (mtmr->irq == sfi_mtimer_array[i].irq) {
-			sfi_mtimer_usage[i] = 0;
-			return;
-		}
-		i++;
-	}
-}
-
-/* parse all the mrtc info to a global mrtc array */
-int __init sfi_parse_mrtc(struct sfi_table_header *table)
-{
-	struct sfi_table_simple *sb;
-	struct sfi_rtc_table_entry *pentry;
-	struct mpc_intsrc mp_irq;
-
-	int totallen;
-
-	sb = (struct sfi_table_simple *)table;
-	if (!sfi_mrtc_num) {
-		sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb,
-						struct sfi_rtc_table_entry);
-		pentry = (struct sfi_rtc_table_entry *)sb->pentry;
-		totallen = sfi_mrtc_num * sizeof(*pentry);
-		memcpy(sfi_mrtc_array, pentry, totallen);
-	}
-
-	pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num);
-	pentry = sfi_mrtc_array;
-	for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) {
-		pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n",
-			totallen, (u32)pentry->phys_addr, pentry->irq);
-		mp_irq.type = MP_INTSRC;
-		mp_irq.irqtype = mp_INT;
-		mp_irq.irqflag = 0xf;	/* level trigger and active low */
-		mp_irq.srcbus = MP_BUS_ISA;
-		mp_irq.srcbusirq = pentry->irq;	/* IRQ */
-		mp_irq.dstapic = MP_APIC_ALL;
-		mp_irq.dstirq = pentry->irq;
-		mp_save_irq(&mp_irq);
-	}
-	return 0;
-}
-
 static unsigned long __init intel_mid_calibrate_tsc(void)
 {
 	unsigned long fast_calibrate;
@@ -339,55 +213,6 @@ static inline int __init setup_x86_intel_mid_timer(char *arg)
 }
 __setup("x86_intel_mid_timer=", setup_x86_intel_mid_timer);
 
-/*
- * Parsing GPIO table first, since the DEVS table will need this table
- * to map the pin name to the actual pin.
- */
-static struct sfi_gpio_table_entry *gpio_table;
-static int gpio_num_entry;
-
-static int __init sfi_parse_gpio(struct sfi_table_header *table)
-{
-	struct sfi_table_simple *sb;
-	struct sfi_gpio_table_entry *pentry;
-	int num, i;
-
-	if (gpio_table)
-		return 0;
-	sb = (struct sfi_table_simple *)table;
-	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry);
-	pentry = (struct sfi_gpio_table_entry *)sb->pentry;
-
-	gpio_table = kmalloc(num * sizeof(*pentry), GFP_KERNEL);
-	if (!gpio_table)
-		return -1;
-	memcpy(gpio_table, pentry, num * sizeof(*pentry));
-	gpio_num_entry = num;
-
-	pr_debug("GPIO pin info:\n");
-	for (i = 0; i < num; i++, pentry++)
-		pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s,"
-		" pin = %d\n", i,
-			pentry->controller_name,
-			pentry->pin_name,
-			pentry->pin_no);
-	return 0;
-}
-
-static int get_gpio_by_name(const char *name)
-{
-	struct sfi_gpio_table_entry *pentry = gpio_table;
-	int i;
-
-	if (!pentry)
-		return -1;
-	for (i = 0; i < gpio_num_entry; i++, pentry++) {
-		if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN))
-			return pentry->pin_no;
-	}
-	return -1;
-}
-
 /* the offset for the mapping of global gpio pin to irq */
 #define INTEL_MID_IRQ_OFFSET 0x100
 
@@ -703,197 +528,6 @@ static const struct devs_id __initconst device_ids[] = {
 	{ 0 }
 };
 
-#define MAX_IPCDEVS	24
-static struct platform_device *ipc_devs[MAX_IPCDEVS];
-static int ipc_next_dev;
-
-#define MAX_SCU_SPI	24
-static struct spi_board_info *spi_devs[MAX_SCU_SPI];
-static int spi_next_dev;
-
-#define MAX_SCU_I2C	24
-static struct i2c_board_info *i2c_devs[MAX_SCU_I2C];
-static int i2c_bus[MAX_SCU_I2C];
-static int i2c_next_dev;
-
-static void __init intel_scu_device_register(struct platform_device *pdev)
-{
-	if (ipc_next_dev == MAX_IPCDEVS)
-		pr_err("too many SCU IPC devices");
-	else
-		ipc_devs[ipc_next_dev++] = pdev;
-}
-
-static void __init intel_scu_spi_device_register(struct spi_board_info *sdev)
-{
-	struct spi_board_info *new_dev;
-
-	if (spi_next_dev == MAX_SCU_SPI) {
-		pr_err("too many SCU SPI devices");
-		return;
-	}
-
-	new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL);
-	if (!new_dev) {
-		pr_err("failed to alloc mem for delayed spi dev %s\n",
-			sdev->modalias);
-		return;
-	}
-	memcpy(new_dev, sdev, sizeof(*sdev));
-
-	spi_devs[spi_next_dev++] = new_dev;
-}
-
-static void __init intel_scu_i2c_device_register(int bus,
-						struct i2c_board_info *idev)
-{
-	struct i2c_board_info *new_dev;
-
-	if (i2c_next_dev == MAX_SCU_I2C) {
-		pr_err("too many SCU I2C devices");
-		return;
-	}
-
-	new_dev = kzalloc(sizeof(*idev), GFP_KERNEL);
-	if (!new_dev) {
-		pr_err("failed to alloc mem for delayed i2c dev %s\n",
-			idev->type);
-		return;
-	}
-	memcpy(new_dev, idev, sizeof(*idev));
-
-	i2c_bus[i2c_next_dev] = bus;
-	i2c_devs[i2c_next_dev++] = new_dev;
-}
-
-BLOCKING_NOTIFIER_HEAD(intel_scu_notifier);
-EXPORT_SYMBOL_GPL(intel_scu_notifier);
-
-/* Called by IPC driver */
-void intel_scu_devices_create(void)
-{
-	int i;
-
-	for (i = 0; i < ipc_next_dev; i++)
-		platform_device_add(ipc_devs[i]);
-
-	for (i = 0; i < spi_next_dev; i++)
-		spi_register_board_info(spi_devs[i], 1);
-
-	for (i = 0; i < i2c_next_dev; i++) {
-		struct i2c_adapter *adapter;
-		struct i2c_client *client;
-
-		adapter = i2c_get_adapter(i2c_bus[i]);
-		if (adapter) {
-			client = i2c_new_device(adapter, i2c_devs[i]);
-			if (!client)
-				pr_err("can't create i2c device %s\n",
-					i2c_devs[i]->type);
-		} else
-			i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
-	}
-	intel_scu_notifier_post(SCU_AVAILABLE, NULL);
-}
-EXPORT_SYMBOL_GPL(intel_scu_devices_create);
-
-/* Called by IPC driver */
-void intel_scu_devices_destroy(void)
-{
-	int i;
-
-	intel_scu_notifier_post(SCU_DOWN, NULL);
-
-	for (i = 0; i < ipc_next_dev; i++)
-		platform_device_del(ipc_devs[i]);
-}
-EXPORT_SYMBOL_GPL(intel_scu_devices_destroy);
-
-static void __init install_irq_resource(struct platform_device *pdev, int irq)
-{
-	/* Single threaded */
-	static struct resource __initdata res = {
-		.name = "IRQ",
-		.flags = IORESOURCE_IRQ,
-	};
-	res.start = irq;
-	platform_device_add_resources(pdev, &res, 1);
-}
-
-static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry,
-					struct devs_id *dev)
-{
-	struct platform_device *pdev;
-	void *pdata = NULL;
-
-	pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
-		pentry->name, pentry->irq);
-	pdata = dev->get_platform_data(pentry);
-
-	pdev = platform_device_alloc(pentry->name, 0);
-	if (pdev == NULL) {
-		pr_err("out of memory for SFI platform device '%s'.\n",
-			pentry->name);
-		return;
-	}
-	install_irq_resource(pdev, pentry->irq);
-
-	pdev->dev.platform_data = pdata;
-	platform_device_add(pdev);
-}
-
-static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry,
-					struct devs_id *dev)
-{
-	struct spi_board_info spi_info;
-	void *pdata = NULL;
-
-	memset(&spi_info, 0, sizeof(spi_info));
-	strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
-	spi_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
-	spi_info.bus_num = pentry->host_num;
-	spi_info.chip_select = pentry->addr;
-	spi_info.max_speed_hz = pentry->max_freq;
-	pr_debug("SPI bus=%d, name=%16.16s, irq=0x%2x, max_freq=%d, cs=%d\n",
-		spi_info.bus_num,
-		spi_info.modalias,
-		spi_info.irq,
-		spi_info.max_speed_hz,
-		spi_info.chip_select);
-
-	pdata = dev->get_platform_data(&spi_info);
-
-	spi_info.platform_data = pdata;
-	if (dev->delay)
-		intel_scu_spi_device_register(&spi_info);
-	else
-		spi_register_board_info(&spi_info, 1);
-}
-
-static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry,
-					struct devs_id *dev)
-{
-	struct i2c_board_info i2c_info;
-	void *pdata = NULL;
-
-	memset(&i2c_info, 0, sizeof(i2c_info));
-	strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
-	i2c_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
-	i2c_info.addr = pentry->addr;
-	pr_debug("I2C bus = %d, name = %16.16s, irq = 0x%2x, addr = 0x%x\n",
-		pentry->host_num,
-		i2c_info.type,
-		i2c_info.irq,
-		i2c_info.addr);
-	pdata = dev->get_platform_data(&i2c_info);
-	i2c_info.platform_data = pdata;
-
-	if (dev->delay)
-		intel_scu_i2c_device_register(pentry->host_num, &i2c_info);
-	else
-		i2c_register_board_info(pentry->host_num, &i2c_info, 1);
-}
-
 static void __init ipc_device_handler(struct sfi_device_table_entry *pentry,
 				struct devs_id *dev)
 {
@@ -934,89 +568,6 @@ static void __init ipc_device_handler(struct sfi_device_table_entry *pentry,
 	intel_scu_device_register(pdev);
 }
 
-static struct devs_id __init *get_device_id(u8 type, char *name)
-{
-	struct devs_id *dev = device_ids;
-
-	if (device_ids == NULL)
-		return NULL;
-
-	while (dev->name[0]) {
-		if (dev->type == type &&
-			!strncmp(dev->name, name, SFI_NAME_LEN)) {
-			return dev;
-		}
-		dev++;
-	}
-
-	return NULL;
-}
-
-static int __init sfi_parse_devs(struct sfi_table_header *table)
-{
-	struct sfi_table_simple *sb;
-	struct sfi_device_table_entry *pentry;
-	struct devs_id *dev = NULL;
-	int num, i;
-	int ioapic;
-	struct io_apic_irq_attr irq_attr;
-
-	sb = (struct sfi_table_simple *)table;
-	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
-	pentry = (struct sfi_device_table_entry *)sb->pentry;
-
-	for (i = 0; i < num; i++, pentry++) {
-		int irq = pentry->irq;
-
-		if (irq != (u8)0xff) { /* native RTE case */
-			/* these SPI2 devices are not exposed to system as PCI
-			 * devices, but they have separate RTE entry in IOAPIC
-			 * so we have to enable them one by one here
-			 */
-			ioapic = mp_find_ioapic(irq);
-			irq_attr.ioapic = ioapic;
-			irq_attr.ioapic_pin = irq;
-			irq_attr.trigger = 1;
-			irq_attr.polarity = 1;
-			io_apic_set_pci_routing(NULL, irq, &irq_attr);
-		} else
-			irq = 0; /* No irq */
-
-		dev = get_device_id(pentry->type, pentry->name);
-
-		if ((dev == NULL) || (dev->get_platform_data == NULL))
-			continue;
-
-		if (dev->device_handler) {
-			dev->device_handler(pentry, dev);
-		} else {
-			switch (pentry->type) {
-			case SFI_DEV_TYPE_IPC:
-				sfi_handle_ipc_dev(pentry, dev);
-				break;
-			case SFI_DEV_TYPE_SPI:
-				sfi_handle_spi_dev(pentry, dev);
-				break;
-			case SFI_DEV_TYPE_I2C:
-				sfi_handle_i2c_dev(pentry, dev);
-				break;
-			case SFI_DEV_TYPE_UART:
-			case SFI_DEV_TYPE_HSI:
-			default:
-				break;
-			}
-		}
-	}
-	return 0;
-}
-
-static int __init intel_mid_platform_init(void)
-{
-	sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
-	sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
-	return 0;
-}
-arch_initcall(intel_mid_platform_init);
 
 /*
  * we will search these buttons in SFI GPIO table (by name)
@@ -1078,4 +629,4 @@ static int __init pb_keys_init(void)
 	}
 	return 0;
 }
-late_initcall(pb_keys_init);
+late_initcall(pb_keys_init);
\ No newline at end of file
diff --git a/arch/x86/platform/intel-mid/sfi.c b/arch/x86/platform/intel-mid/sfi.c
new file mode 100644
index 000000000000..2f8196d38f53
--- /dev/null
+++ b/arch/x86/platform/intel-mid/sfi.c
@@ -0,0 +1,485 @@
+/*
+ * intel_mid_sfi.c: Intel MID SFI initialization code
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/sfi.h>
+#include <linux/intel_pmic_gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/skbuff.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/mmc/core.h>
+#include <linux/mmc/card.h>
+#include <linux/blkdev.h>
+
+#include <asm/setup.h>
+#include <asm/mpspec_def.h>
+#include <asm/hw_irq.h>
+#include <asm/apic.h>
+#include <asm/io_apic.h>
+#include <asm/intel-mid.h>
+#include <asm/intel_mid_vrtc.h>
+#include <asm/io.h>
+#include <asm/i8259.h>
+#include <asm/intel_scu_ipc.h>
+#include <asm/apb_timer.h>
+#include <asm/reboot.h>
+#include "intel_mid_weak_decls.h"
+
+#define	SFI_SIG_OEM0	"OEM0"
+#define MAX_IPCDEVS	24
+#define MAX_SCU_SPI	24
+#define MAX_SCU_I2C	24
+
+static struct platform_device *ipc_devs[MAX_IPCDEVS];
+static struct spi_board_info *spi_devs[MAX_SCU_SPI];
+static struct i2c_board_info *i2c_devs[MAX_SCU_I2C];
+static struct sfi_gpio_table_entry *gpio_table;
+static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
+static int ipc_next_dev;
+static int spi_next_dev;
+static int i2c_next_dev;
+static int i2c_bus[MAX_SCU_I2C];
+static int gpio_num_entry;
+static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
+int sfi_mrtc_num;
+int sfi_mtimer_num;
+
+struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
+EXPORT_SYMBOL_GPL(sfi_mrtc_array);
+
+struct blocking_notifier_head intel_scu_notifier =
+			BLOCKING_NOTIFIER_INIT(intel_scu_notifier);
+EXPORT_SYMBOL_GPL(intel_scu_notifier);
+
+/* parse all the mtimer info to a static mtimer array */
+int __init sfi_parse_mtmr(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+	struct sfi_timer_table_entry *pentry;
+	struct mpc_intsrc mp_irq;
+	int totallen;
+
+	sb = (struct sfi_table_simple *)table;
+	if (!sfi_mtimer_num) {
+		sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb,
+					struct sfi_timer_table_entry);
+		pentry = (struct sfi_timer_table_entry *) sb->pentry;
+		totallen = sfi_mtimer_num * sizeof(*pentry);
+		memcpy(sfi_mtimer_array, pentry, totallen);
+	}
+
+	pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num);
+	pentry = sfi_mtimer_array;
+	for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) {
+		pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz, irq = %d\n",
+			totallen, (u32)pentry->phys_addr,
+			pentry->freq_hz, pentry->irq);
+			if (!pentry->irq)
+				continue;
+			mp_irq.type = MP_INTSRC;
+			mp_irq.irqtype = mp_INT;
+/* triggering mode edge bit 2-3, active high polarity bit 0-1 */
+			mp_irq.irqflag = 5;
+			mp_irq.srcbus = MP_BUS_ISA;
+			mp_irq.srcbusirq = pentry->irq;	/* IRQ */
+			mp_irq.dstapic = MP_APIC_ALL;
+			mp_irq.dstirq = pentry->irq;
+			mp_save_irq(&mp_irq);
+	}
+
+	return 0;
+}
+
+struct sfi_timer_table_entry *sfi_get_mtmr(int hint)
+{
+	int i;
+	if (hint < sfi_mtimer_num) {
+		if (!sfi_mtimer_usage[hint]) {
+			pr_debug("hint taken for timer %d irq %d\n",
+				hint, sfi_mtimer_array[hint].irq);
+			sfi_mtimer_usage[hint] = 1;
+			return &sfi_mtimer_array[hint];
+		}
+	}
+	/* take the first timer available */
+	for (i = 0; i < sfi_mtimer_num;) {
+		if (!sfi_mtimer_usage[i]) {
+			sfi_mtimer_usage[i] = 1;
+			return &sfi_mtimer_array[i];
+		}
+		i++;
+	}
+	return NULL;
+}
+
+void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr)
+{
+	int i;
+	for (i = 0; i < sfi_mtimer_num;) {
+		if (mtmr->irq == sfi_mtimer_array[i].irq) {
+			sfi_mtimer_usage[i] = 0;
+			return;
+		}
+		i++;
+	}
+}
+
+/* parse all the mrtc info to a global mrtc array */
+int __init sfi_parse_mrtc(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+	struct sfi_rtc_table_entry *pentry;
+	struct mpc_intsrc mp_irq;
+
+	int totallen;
+
+	sb = (struct sfi_table_simple *)table;
+	if (!sfi_mrtc_num) {
+		sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb,
+						struct sfi_rtc_table_entry);
+		pentry = (struct sfi_rtc_table_entry *)sb->pentry;
+		totallen = sfi_mrtc_num * sizeof(*pentry);
+		memcpy(sfi_mrtc_array, pentry, totallen);
+	}
+
+	pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num);
+	pentry = sfi_mrtc_array;
+	for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) {
+		pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n",
+			totallen, (u32)pentry->phys_addr, pentry->irq);
+		mp_irq.type = MP_INTSRC;
+		mp_irq.irqtype = mp_INT;
+		mp_irq.irqflag = 0xf;	/* level trigger and active low */
+		mp_irq.srcbus = MP_BUS_ISA;
+		mp_irq.srcbusirq = pentry->irq;	/* IRQ */
+		mp_irq.dstapic = MP_APIC_ALL;
+		mp_irq.dstirq = pentry->irq;
+		mp_save_irq(&mp_irq);
+	}
+	return 0;
+}
+
+
+/*
+ * Parsing GPIO table first, since the DEVS table will need this table
+ * to map the pin name to the actual pin.
+ */
+static int __init sfi_parse_gpio(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+	struct sfi_gpio_table_entry *pentry;
+	int num, i;
+
+	if (gpio_table)
+		return 0;
+	sb = (struct sfi_table_simple *)table;
+	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry);
+	pentry = (struct sfi_gpio_table_entry *)sb->pentry;
+
+	gpio_table = kmalloc(num * sizeof(*pentry), GFP_KERNEL);
+	if (!gpio_table)
+		return -1;
+	memcpy(gpio_table, pentry, num * sizeof(*pentry));
+	gpio_num_entry = num;
+
+	pr_debug("GPIO pin info:\n");
+	for (i = 0; i < num; i++, pentry++)
+		pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s,"
+		" pin = %d\n", i,
+			pentry->controller_name,
+			pentry->pin_name,
+			pentry->pin_no);
+	return 0;
+}
+
+int get_gpio_by_name(const char *name)
+{
+	struct sfi_gpio_table_entry *pentry = gpio_table;
+	int i;
+
+	if (!pentry)
+		return -1;
+	for (i = 0; i < gpio_num_entry; i++, pentry++) {
+		if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN))
+			return pentry->pin_no;
+	}
+	return -1;
+}
+
+void __init intel_scu_device_register(struct platform_device *pdev)
+{
+	if (ipc_next_dev == MAX_IPCDEVS)
+		pr_err("too many SCU IPC devices");
+	else
+		ipc_devs[ipc_next_dev++] = pdev;
+}
+
+static void __init intel_scu_spi_device_register(struct spi_board_info *sdev)
+{
+	struct spi_board_info *new_dev;
+
+	if (spi_next_dev == MAX_SCU_SPI) {
+		pr_err("too many SCU SPI devices");
+		return;
+	}
+
+	new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL);
+	if (!new_dev) {
+		pr_err("failed to alloc mem for delayed spi dev %s\n",
+			sdev->modalias);
+		return;
+	}
+	memcpy(new_dev, sdev, sizeof(*sdev));
+
+	spi_devs[spi_next_dev++] = new_dev;
+}
+
+static void __init intel_scu_i2c_device_register(int bus,
+						struct i2c_board_info *idev)
+{
+	struct i2c_board_info *new_dev;
+
+	if (i2c_next_dev == MAX_SCU_I2C) {
+		pr_err("too many SCU I2C devices");
+		return;
+	}
+
+	new_dev = kzalloc(sizeof(*idev), GFP_KERNEL);
+	if (!new_dev) {
+		pr_err("failed to alloc mem for delayed i2c dev %s\n",
+			idev->type);
+		return;
+	}
+	memcpy(new_dev, idev, sizeof(*idev));
+
+	i2c_bus[i2c_next_dev] = bus;
+	i2c_devs[i2c_next_dev++] = new_dev;
+}
+
+/* Called by IPC driver */
+void intel_scu_devices_create(void)
+{
+	int i;
+
+	for (i = 0; i < ipc_next_dev; i++)
+		platform_device_add(ipc_devs[i]);
+
+	for (i = 0; i < spi_next_dev; i++)
+		spi_register_board_info(spi_devs[i], 1);
+
+	for (i = 0; i < i2c_next_dev; i++) {
+		struct i2c_adapter *adapter;
+		struct i2c_client *client;
+
+		adapter = i2c_get_adapter(i2c_bus[i]);
+		if (adapter) {
+			client = i2c_new_device(adapter, i2c_devs[i]);
+			if (!client)
+				pr_err("can't create i2c device %s\n",
+					i2c_devs[i]->type);
+		} else
+			i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
+	}
+	intel_scu_notifier_post(SCU_AVAILABLE, NULL);
+}
+EXPORT_SYMBOL_GPL(intel_scu_devices_create);
+
+/* Called by IPC driver */
+void intel_scu_devices_destroy(void)
+{
+	int i;
+
+	intel_scu_notifier_post(SCU_DOWN, NULL);
+
+	for (i = 0; i < ipc_next_dev; i++)
+		platform_device_del(ipc_devs[i]);
+}
+EXPORT_SYMBOL_GPL(intel_scu_devices_destroy);
+
+static void __init install_irq_resource(struct platform_device *pdev, int irq)
+{
+	/* Single threaded */
+	static struct resource res __initdata = {
+		.name = "IRQ",
+		.flags = IORESOURCE_IRQ,
+	};
+	res.start = irq;
+	platform_device_add_resources(pdev, &res, 1);
+}
+
+static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry,
+					struct devs_id *dev)
+{
+	struct platform_device *pdev;
+	void *pdata = NULL;
+
+	pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
+		pentry->name, pentry->irq);
+	pdata = dev->get_platform_data(pentry);
+
+	pdev = platform_device_alloc(pentry->name, 0);
+	if (pdev == NULL) {
+		pr_err("out of memory for SFI platform device '%s'.\n",
+			pentry->name);
+		return;
+	}
+	install_irq_resource(pdev, pentry->irq);
+
+	pdev->dev.platform_data = pdata;
+	platform_device_add(pdev);
+}
+
+static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry,
+					struct devs_id *dev)
+{
+	struct spi_board_info spi_info;
+	void *pdata = NULL;
+
+	memset(&spi_info, 0, sizeof(spi_info));
+	strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
+	spi_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
+	spi_info.bus_num = pentry->host_num;
+	spi_info.chip_select = pentry->addr;
+	spi_info.max_speed_hz = pentry->max_freq;
+	pr_debug("SPI bus=%d, name=%16.16s, irq=0x%2x, max_freq=%d, cs=%d\n",
+		spi_info.bus_num,
+		spi_info.modalias,
+		spi_info.irq,
+		spi_info.max_speed_hz,
+		spi_info.chip_select);
+
+	pdata = dev->get_platform_data(&spi_info);
+
+	spi_info.platform_data = pdata;
+	if (dev->delay)
+		intel_scu_spi_device_register(&spi_info);
+	else
+		spi_register_board_info(&spi_info, 1);
+}
+
+static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry,
+					struct devs_id *dev)
+{
+	struct i2c_board_info i2c_info;
+	void *pdata = NULL;
+
+	memset(&i2c_info, 0, sizeof(i2c_info));
+	strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
+	i2c_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
+	i2c_info.addr = pentry->addr;
+	pr_debug("I2C bus = %d, name = %16.16s, irq = 0x%2x, addr = 0x%x\n",
+		pentry->host_num,
+		i2c_info.type,
+		i2c_info.irq,
+		i2c_info.addr);
+	pdata = dev->get_platform_data(&i2c_info);
+	i2c_info.platform_data = pdata;
+
+	if (dev->delay)
+		intel_scu_i2c_device_register(pentry->host_num, &i2c_info);
+	else
+		i2c_register_board_info(pentry->host_num, &i2c_info, 1);
+}
+
+static struct devs_id __init *get_device_id(u8 type, char *name)
+{
+	struct devs_id *dev = device_ids;
+
+	if (device_ids == NULL)
+		return NULL;
+
+	while (dev->name[0]) {
+		if (dev->type == type &&
+			!strncmp(dev->name, name, SFI_NAME_LEN)) {
+			return dev;
+		}
+		dev++;
+	}
+
+	return NULL;
+}
+
+static int __init sfi_parse_devs(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+	struct sfi_device_table_entry *pentry;
+	struct devs_id *dev = NULL;
+	int num, i;
+	int ioapic;
+	struct io_apic_irq_attr irq_attr;
+
+	sb = (struct sfi_table_simple *)table;
+	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
+	pentry = (struct sfi_device_table_entry *)sb->pentry;
+
+	for (i = 0; i < num; i++, pentry++) {
+		int irq = pentry->irq;
+
+		if (irq != (u8)0xff) { /* native RTE case */
+			/* these SPI2 devices are not exposed to system as PCI
+			 * devices, but they have separate RTE entry in IOAPIC
+			 * so we have to enable them one by one here
+			 */
+			ioapic = mp_find_ioapic(irq);
+			irq_attr.ioapic = ioapic;
+			irq_attr.ioapic_pin = irq;
+			irq_attr.trigger = 1;
+			irq_attr.polarity = 1;
+			io_apic_set_pci_routing(NULL, irq, &irq_attr);
+		} else
+			irq = 0; /* No irq */
+
+		dev = get_device_id(pentry->type, pentry->name);
+
+		if ((dev == NULL) || (dev->get_platform_data == NULL))
+			continue;
+
+		if (dev->device_handler) {
+			dev->device_handler(pentry, dev);
+		} else {
+			switch (pentry->type) {
+			case SFI_DEV_TYPE_IPC:
+				sfi_handle_ipc_dev(pentry, dev);
+				break;
+			case SFI_DEV_TYPE_SPI:
+				sfi_handle_spi_dev(pentry, dev);
+				break;
+			case SFI_DEV_TYPE_I2C:
+				sfi_handle_i2c_dev(pentry, dev);
+				break;
+			case SFI_DEV_TYPE_UART:
+			case SFI_DEV_TYPE_HSI:
+			default:
+				break;
+			}
+		}
+	}
+	return 0;
+}
+
+static int __init intel_mid_platform_init(void)
+{
+	sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
+	sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
+	return 0;
+}
+arch_initcall(intel_mid_platform_init);
-- 
cgit v1.2.3


From 0e6fdb5f036338bc38bf660c65c931b3e92a31d7 Mon Sep 17 00:00:00 2001
From: David Cohen
Date: Thu, 17 Oct 2013 15:35:34 -0700
Subject: intel-mid: sfi: Allow struct devs_id.get_platform_data to be NULL

Intel mid sfi code doesn't need struct devs_id.get_platform_data != NULL.
If the callback is not set, just assume there is no platform_data.

Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-11-git-send-email-david.a.cohen@linux.intel.com
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/platform/intel-mid/sfi.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/platform/intel-mid/sfi.c b/arch/x86/platform/intel-mid/sfi.c
index 2f8196d38f53..3f1c171e5ce3 100644
--- a/arch/x86/platform/intel-mid/sfi.c
+++ b/arch/x86/platform/intel-mid/sfi.c
@@ -70,6 +70,9 @@ struct blocking_notifier_head intel_scu_notifier =
 			BLOCKING_NOTIFIER_INIT(intel_scu_notifier);
 EXPORT_SYMBOL_GPL(intel_scu_notifier);
 
+#define intel_mid_sfi_get_pdata(dev, priv)	\
+	((dev)->get_platform_data ? (dev)->get_platform_data(priv) : NULL)
+
 /* parse all the mtimer info to a static mtimer array */
 int __init sfi_parse_mtmr(struct sfi_table_header *table)
 {
@@ -334,7 +337,7 @@ static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry,
 
 	pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
 		pentry->name, pentry->irq);
-	pdata = dev->get_platform_data(pentry);
+	pdata = intel_mid_sfi_get_pdata(dev, pentry);
 
 	pdev = platform_device_alloc(pentry->name, 0);
 	if (pdev == NULL) {
@@ -367,7 +370,7 @@ static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry,
 		spi_info.max_speed_hz,
 		spi_info.chip_select);
 
-	pdata = dev->get_platform_data(&spi_info);
+	pdata = intel_mid_sfi_get_pdata(dev, &spi_info);
 
 	spi_info.platform_data = pdata;
 	if (dev->delay)
@@ -391,7 +394,7 @@ static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry,
 		i2c_info.type,
 		i2c_info.irq,
 		i2c_info.addr);
-	pdata = dev->get_platform_data(&i2c_info);
+	pdata = intel_mid_sfi_get_pdata(dev, &i2c_info);
 	i2c_info.platform_data = pdata;
 
 	if (dev->delay)
@@ -450,7 +453,7 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
 
 		dev = get_device_id(pentry->type, pentry->name);
 
-		if ((dev == NULL) || (dev->get_platform_data == NULL))
+		if (!dev)
 			continue;
 
 		if (dev->device_handler) {
-- 
cgit v1.2.3


From 66ac50137049b3d3fab39e5ae245e1562aee5acd Mon Sep 17 00:00:00 2001
From: David Cohen
Date: Thu, 17 Oct 2013 15:35:35 -0700
Subject: x86: intel-mid: Add section for sfi device table

When Intel mid uses SFI table to enumerate devices, it requires an extra
device table with further information about how to probe such devices.

This patch creates a section where the device table will stay if
CONFIG_X86_INTEL_MID is selected.

Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-12-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/vmlinux.lds.S | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 10c4f3006afd..da6b35a98260 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -199,6 +199,15 @@ SECTIONS
 		__x86_cpu_dev_end = .;
 	}
 
+#ifdef CONFIG_X86_INTEL_MID
+	.x86_intel_mid_dev.init : AT(ADDR(.x86_intel_mid_dev.init) - \
+								LOAD_OFFSET) {
+		__x86_intel_mid_dev_start = .;
+		*(.x86_intel_mid_dev.init)
+		__x86_intel_mid_dev_end = .;
+	}
+#endif
+
 	/*
 	 * start address and size of operations which during runtime
 	 * can be patched with virtualization friendly instructions or
-- 
cgit v1.2.3


From 40a96d54ee2232045783e657eb9224cd723dcb40 Mon Sep 17 00:00:00 2001
From: David Cohen
Date: Thu, 17 Oct 2013 15:35:36 -0700
Subject: intel_mid: Move platform device setups to their own
 platform_<device>.* files

As Intel rolling out more SoC's after Moorestown, we need to
re-structure the code in a way that is backward compatible and easy to
expand. This patch implements a flexible way to support multiple boards
and devices.

This patch does not add any new functional support. It just refactors
the existing code to increase the modularity and decrease the code
duplication for supporting multiple soc's and boards.

Currently intel-mid.c has both board and soc related code in one file.
This patch moves the board related code to new files and let linker
script to create SFI devite table following this:

1. Move the SFI device specific code to
   arch/x86/platform/intel-mid/device-libs/platform_<device>.*
   A new device file is added for every supported device. This code will
   get conditionally compiled by using corresponding device driver
   CONFIG option.

2. Move the device_ids location to .x86_intel_mid_dev.init section by
   using new sfi_device() macro.

This patch was based on previous code from Sathyanarayanan Kuppuswamy.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-13-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/intel-mid.h                   |  16 +
 arch/x86/platform/intel-mid/Makefile               |   8 +-
 arch/x86/platform/intel-mid/device_libs/Makefile   |  22 ++
 .../intel-mid/device_libs/platform_bma023.c        |  20 +
 .../intel-mid/device_libs/platform_emc1403.c       |  41 ++
 .../intel-mid/device_libs/platform_gpio_keys.c     |  83 ++++
 .../platform/intel-mid/device_libs/platform_ipc.c  |  68 ++++
 .../platform/intel-mid/device_libs/platform_ipc.h  |  17 +
 .../intel-mid/device_libs/platform_lis331.c        |  39 ++
 .../intel-mid/device_libs/platform_max3111.c       |  35 ++
 .../intel-mid/device_libs/platform_max7315.c       |  79 ++++
 .../intel-mid/device_libs/platform_mpu3050.c       |  36 ++
 .../platform/intel-mid/device_libs/platform_msic.c |  87 +++++
 .../platform/intel-mid/device_libs/platform_msic.h |  19 +
 .../intel-mid/device_libs/platform_msic_audio.c    |  47 +++
 .../intel-mid/device_libs/platform_msic_battery.c  |  37 ++
 .../intel-mid/device_libs/platform_msic_gpio.c     |  48 +++
 .../intel-mid/device_libs/platform_msic_ocd.c      |  49 +++
 .../device_libs/platform_msic_power_btn.c          |  36 ++
 .../intel-mid/device_libs/platform_msic_thermal.c  |  37 ++
 .../intel-mid/device_libs/platform_pmic_gpio.c     |  54 +++
 .../intel-mid/device_libs/platform_tc35876x.c      |  36 ++
 .../intel-mid/device_libs/platform_tca6416.c       |  57 +++
 arch/x86/platform/intel-mid/intel-mid.c            | 419 ---------------------
 arch/x86/platform/intel-mid/sfi.c                  |  14 +-
 include/linux/sfi.h                                |   3 +
 26 files changed, 978 insertions(+), 429 deletions(-)
 create mode 100644 arch/x86/platform/intel-mid/device_libs/Makefile
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_bma023.c
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_emc1403.c
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_ipc.c
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_ipc.h
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_lis331.c
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_max3111.c
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_max7315.c
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_msic.c
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_msic.h
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_pmic_gpio.c
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_tca6416.c

(limited to 'arch')

diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
index 3b0e7a771cb5..459769d39263 100644
--- a/arch/x86/include/asm/intel-mid.h
+++ b/arch/x86/include/asm/intel-mid.h
@@ -12,8 +12,11 @@
 #define _ASM_X86_INTEL_MID_H
 
 #include <linux/sfi.h>
+#include <linux/platform_device.h>
 
 extern int intel_mid_pci_init(void);
+extern int get_gpio_by_name(const char *name);
+extern void intel_scu_device_register(struct platform_device *pdev);
 extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
 extern int __init sfi_parse_mtmr(struct sfi_table_header *table);
 extern int sfi_mrtc_num;
@@ -34,6 +37,10 @@ struct devs_id {
 				struct devs_id *dev);
 };
 
+#define sfi_device(i)   \
+	static const struct devs_id *const __intel_mid_sfi_##i##_dev __used \
+	__attribute__((__section__(".x86_intel_mid_dev.init"))) = &i
+
 /*
  * Medfield is the follow-up of Moorestown, it combines two chip solution into
  * one. Other than that it also added always-on and constant tsc and lapic
@@ -55,9 +62,15 @@ static inline enum intel_mid_cpu_type intel_mid_identify_cpu(void)
 	return __intel_mid_cpu_chip;
 }
 
+static inline bool intel_mid_has_msic(void)
+{
+	return (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL);
+}
+
 #else /* !CONFIG_X86_INTEL_MID */
 
 #define intel_mid_identify_cpu()    (0)
+#define intel_mid_has_msic()    (0)
 
 #endif /* !CONFIG_X86_INTEL_MID */
 
@@ -94,4 +107,7 @@ extern void intel_scu_devices_destroy(void);
 
 extern void intel_mid_rtc_init(void);
 
+/* the offset for the mapping of global gpio pin to irq */
+#define INTEL_MID_IRQ_OFFSET 0x100
+
 #endif /* _ASM_X86_INTEL_MID_H */
diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile
index b11e5b2de336..01cc29ea5ff7 100644
--- a/arch/x86/platform/intel-mid/Makefile
+++ b/arch/x86/platform/intel-mid/Makefile
@@ -1,5 +1,7 @@
 obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o
-obj-$(CONFIG_X86_INTEL_MID)	+= intel_mid_vrtc.o
-obj-$(CONFIG_EARLY_PRINTK_INTEL_MID)	+= early_printk_intel_mid.o
+obj-$(CONFIG_X86_INTEL_MID) += intel_mid_vrtc.o
+obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_intel_mid.o
 # SFI specific code
-obj-$(CONFIG_SFI) += sfi.o
+ifdef CONFIG_X86_INTEL_MID
+obj-$(CONFIG_SFI) += sfi.o device_libs/
+endif
diff --git a/arch/x86/platform/intel-mid/device_libs/Makefile b/arch/x86/platform/intel-mid/device_libs/Makefile
new file mode 100644
index 000000000000..097e7a7940d8
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/Makefile
@@ -0,0 +1,22 @@
+# IPC Devices
+obj-y += platform_ipc.o
+obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic.o
+obj-$(subst m,y,$(CONFIG_SND_MFLD_MACHINE)) += platform_msic_audio.o
+obj-$(subst m,y,$(CONFIG_GPIO_MSIC)) += platform_msic_gpio.o
+obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic_ocd.o
+obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic_battery.o
+obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_msic_power_btn.o
+obj-$(subst m,y,$(CONFIG_GPIO_INTEL_PMIC)) += platform_pmic_gpio.o
+obj-$(subst m,y,$(CONFIG_INTEL_MFLD_THERMAL)) += platform_msic_thermal.o
+# I2C Devices
+obj-$(subst m,y,$(CONFIG_SENSORS_EMC1403)) += platform_emc1403.o
+obj-$(subst m,y,$(CONFIG_SENSORS_LIS3LV02D)) += platform_lis331.o
+obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_max7315.o
+obj-$(subst m,y,$(CONFIG_INPUT_MPU3050)) += platform_mpu3050.o
+obj-$(subst m,y,$(CONFIG_INPUT_BMA150)) += platform_bma023.o
+obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o
+obj-$(subst m,y,$(CONFIG_DRM_MEDFIELD)) += platform_tc35876x.o
+# SPI Devices
+obj-$(subst m,y,$(CONFIG_SERIAL_MRST_MAX3110)) += platform_max3111.o
+# MISC Devices
+obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_bma023.c b/arch/x86/platform/intel-mid/device_libs/platform_bma023.c
new file mode 100644
index 000000000000..0ae7f2ae2296
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_bma023.c
@@ -0,0 +1,20 @@
+/*
+ * platform_bma023.c: bma023 platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <asm/intel-mid.h>
+
+static const struct devs_id bma023_dev_id __initconst = {
+	.name = "bma023",
+	.type = SFI_DEV_TYPE_I2C,
+	.delay = 1,
+};
+
+sfi_device(bma023_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_emc1403.c b/arch/x86/platform/intel-mid/device_libs/platform_emc1403.c
new file mode 100644
index 000000000000..0d942c1d26d5
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_emc1403.c
@@ -0,0 +1,41 @@
+/*
+ * platform_emc1403.c: emc1403 platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <asm/intel-mid.h>
+
+static void __init *emc1403_platform_data(void *info)
+{
+	static short intr2nd_pdata;
+	struct i2c_board_info *i2c_info = info;
+	int intr = get_gpio_by_name("thermal_int");
+	int intr2nd = get_gpio_by_name("thermal_alert");
+
+	if (intr == -1 || intr2nd == -1)
+		return NULL;
+
+	i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+	intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET;
+
+	return &intr2nd_pdata;
+}
+
+static const struct devs_id emc1403_dev_id __initconst = {
+	.name = "emc1403",
+	.type = SFI_DEV_TYPE_I2C,
+	.delay = 1,
+	.get_platform_data = &emc1403_platform_data,
+};
+
+sfi_device(emc1403_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c b/arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c
new file mode 100644
index 000000000000..a013a4834bbe
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c
@@ -0,0 +1,83 @@
+/*
+ * platform_gpio_keys.c: gpio_keys platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/platform_device.h>
+#include <asm/intel-mid.h>
+
+#define DEVICE_NAME "gpio-keys"
+
+/*
+ * we will search these buttons in SFI GPIO table (by name)
+ * and register them dynamically. Please add all possible
+ * buttons here, we will shrink them if no GPIO found.
+ */
+static struct gpio_keys_button gpio_button[] = {
+	{KEY_POWER,		-1, 1, "power_btn",	EV_KEY, 0, 3000},
+	{KEY_PROG1,		-1, 1, "prog_btn1",	EV_KEY, 0, 20},
+	{KEY_PROG2,		-1, 1, "prog_btn2",	EV_KEY, 0, 20},
+	{SW_LID,		-1, 1, "lid_switch",	EV_SW,  0, 20},
+	{KEY_VOLUMEUP,		-1, 1, "vol_up",	EV_KEY, 0, 20},
+	{KEY_VOLUMEDOWN,	-1, 1, "vol_down",	EV_KEY, 0, 20},
+	{KEY_CAMERA,		-1, 1, "camera_full",	EV_KEY, 0, 20},
+	{KEY_CAMERA_FOCUS,	-1, 1, "camera_half",	EV_KEY, 0, 20},
+	{SW_KEYPAD_SLIDE,	-1, 1, "MagSw1",	EV_SW,  0, 20},
+	{SW_KEYPAD_SLIDE,	-1, 1, "MagSw2",	EV_SW,  0, 20},
+};
+
+static struct gpio_keys_platform_data gpio_keys = {
+	.buttons	= gpio_button,
+	.rep		= 1,
+	.nbuttons	= -1, /* will fill it after search */
+};
+
+static struct platform_device pb_device = {
+	.name		= DEVICE_NAME,
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &gpio_keys,
+	},
+};
+
+/*
+ * Shrink the non-existent buttons, register the gpio button
+ * device if there is some
+ */
+static int __init pb_keys_init(void)
+{
+	struct gpio_keys_button *gb = gpio_button;
+	int i, num, good = 0;
+
+	num = sizeof(gpio_button) / sizeof(struct gpio_keys_button);
+	for (i = 0; i < num; i++) {
+		gb[i].gpio = get_gpio_by_name(gb[i].desc);
+		pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc,
+					gb[i].gpio);
+		if (gb[i].gpio == -1)
+			continue;
+
+		if (i != good)
+			gb[good] = gb[i];
+		good++;
+	}
+
+	if (good) {
+		gpio_keys.nbuttons = good;
+		return platform_device_register(&pb_device);
+	}
+	return 0;
+}
+late_initcall(pb_keys_init);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_ipc.c b/arch/x86/platform/intel-mid/device_libs/platform_ipc.c
new file mode 100644
index 000000000000..a84b73d6c4a0
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_ipc.c
@@ -0,0 +1,68 @@
+/*
+ * platform_ipc.c: IPC platform library file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/sfi.h>
+#include <linux/gpio.h>
+#include <asm/intel-mid.h>
+#include "platform_ipc.h"
+
+void __init ipc_device_handler(struct sfi_device_table_entry *pentry,
+				struct devs_id *dev)
+{
+	struct platform_device *pdev;
+	void *pdata = NULL;
+	static struct resource res __initdata = {
+		.name = "IRQ",
+		.flags = IORESOURCE_IRQ,
+	};
+
+	pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
+		pentry->name, pentry->irq);
+
+	/*
+	 * We need to call platform init of IPC devices to fill misc_pdata
+	 * structure. It will be used in msic_init for initialization.
+	 */
+	if (dev != NULL)
+		pdata = dev->get_platform_data(pentry);
+
+	/*
+	 * On Medfield the platform device creation is handled by the MSIC
+	 * MFD driver so we don't need to do it here.
+	 */
+	if (intel_mid_has_msic())
+		return;
+
+	pdev = platform_device_alloc(pentry->name, 0);
+	if (pdev == NULL) {
+		pr_err("out of memory for SFI platform device '%s'.\n",
+			pentry->name);
+		return;
+	}
+	res.start = pentry->irq;
+	platform_device_add_resources(pdev, &res, 1);
+
+	pdev->dev.platform_data = pdata;
+	intel_scu_device_register(pdev);
+}
+
+static const struct devs_id pmic_audio_dev_id __initconst = {
+	.name = "pmic_audio",
+	.type = SFI_DEV_TYPE_IPC,
+	.delay = 1,
+	.device_handler = &ipc_device_handler,
+};
+
+sfi_device(pmic_audio_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_ipc.h b/arch/x86/platform/intel-mid/device_libs/platform_ipc.h
new file mode 100644
index 000000000000..8f568dd79605
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_ipc.h
@@ -0,0 +1,17 @@
+/*
+ * platform_ipc.h: IPC platform library header file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#ifndef _PLATFORM_IPC_H_
+#define _PLATFORM_IPC_H_
+
+extern void __init ipc_device_handler(struct sfi_device_table_entry *pentry,
+			struct devs_id *dev) __attribute__((weak));
+#endif
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_lis331.c b/arch/x86/platform/intel-mid/device_libs/platform_lis331.c
new file mode 100644
index 000000000000..15278c11f714
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_lis331.c
@@ -0,0 +1,39 @@
+/*
+ * platform_lis331.c:  lis331 platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <asm/intel-mid.h>
+
+static void __init *lis331dl_platform_data(void *info)
+{
+	static short intr2nd_pdata;
+	struct i2c_board_info *i2c_info = info;
+	int intr = get_gpio_by_name("accel_int");
+	int intr2nd = get_gpio_by_name("accel_2");
+
+	if (intr == -1 || intr2nd == -1)
+		return NULL;
+
+	i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+	intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET;
+
+	return &intr2nd_pdata;
+}
+
+static const struct devs_id lis331dl_dev_id __initconst = {
+	.name = "i2c_accel",
+	.type = SFI_DEV_TYPE_I2C,
+	.get_platform_data = &lis331dl_platform_data,
+};
+
+sfi_device(lis331dl_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_max3111.c b/arch/x86/platform/intel-mid/device_libs/platform_max3111.c
new file mode 100644
index 000000000000..afd1df94e0e5
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_max3111.c
@@ -0,0 +1,35 @@
+/*
+ * platform_max3111.c: max3111 platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <asm/intel-mid.h>
+
+static void __init *max3111_platform_data(void *info)
+{
+	struct spi_board_info *spi_info = info;
+	int intr = get_gpio_by_name("max3111_int");
+
+	spi_info->mode = SPI_MODE_0;
+	if (intr == -1)
+		return NULL;
+	spi_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+	return NULL;
+}
+
+static const struct devs_id max3111_dev_id __initconst = {
+	.name = "spi_max3111",
+	.type = SFI_DEV_TYPE_SPI,
+	.get_platform_data = &max3111_platform_data,
+};
+
+sfi_device(max3111_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_max7315.c b/arch/x86/platform/intel-mid/device_libs/platform_max7315.c
new file mode 100644
index 000000000000..94ade10024ae
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_max7315.c
@@ -0,0 +1,79 @@
+/*
+ * platform_max7315.c: max7315 platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/pca953x.h>
+#include <asm/intel-mid.h>
+
+#define MAX7315_NUM 2
+
+static void __init *max7315_platform_data(void *info)
+{
+	static struct pca953x_platform_data max7315_pdata[MAX7315_NUM];
+	static int nr;
+	struct pca953x_platform_data *max7315 = &max7315_pdata[nr];
+	struct i2c_board_info *i2c_info = info;
+	int gpio_base, intr;
+	char base_pin_name[SFI_NAME_LEN + 1];
+	char intr_pin_name[SFI_NAME_LEN + 1];
+
+	if (nr == MAX7315_NUM) {
+		pr_err("too many max7315s, we only support %d\n",
+				MAX7315_NUM);
+		return NULL;
+	}
+	/* we have several max7315 on the board, we only need load several
+	 * instances of the same pca953x driver to cover them
+	 */
+	strcpy(i2c_info->type, "max7315");
+	if (nr++) {
+		sprintf(base_pin_name, "max7315_%d_base", nr);
+		sprintf(intr_pin_name, "max7315_%d_int", nr);
+	} else {
+		strcpy(base_pin_name, "max7315_base");
+		strcpy(intr_pin_name, "max7315_int");
+	}
+
+	gpio_base = get_gpio_by_name(base_pin_name);
+	intr = get_gpio_by_name(intr_pin_name);
+
+	if (gpio_base == -1)
+		return NULL;
+	max7315->gpio_base = gpio_base;
+	if (intr != -1) {
+		i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+		max7315->irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
+	} else {
+		i2c_info->irq = -1;
+		max7315->irq_base = -1;
+	}
+	return max7315;
+}
+
+static const struct devs_id max7315_dev_id __initconst = {
+	.name = "i2c_max7315",
+	.type = SFI_DEV_TYPE_I2C,
+	.delay = 1,
+	.get_platform_data = &max7315_platform_data,
+};
+
+static const struct devs_id max7315_2_dev_id __initconst = {
+	.name = "i2c_max7315_2",
+	.type = SFI_DEV_TYPE_I2C,
+	.delay = 1,
+	.get_platform_data = &max7315_platform_data,
+};
+
+sfi_device(max7315_dev_id);
+sfi_device(max7315_2_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c b/arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c
new file mode 100644
index 000000000000..dd28d63c84fb
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c
@@ -0,0 +1,36 @@
+/*
+ * platform_mpu3050.c: mpu3050 platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <asm/intel-mid.h>
+
+static void *mpu3050_platform_data(void *info)
+{
+	struct i2c_board_info *i2c_info = info;
+	int intr = get_gpio_by_name("mpu3050_int");
+
+	if (intr == -1)
+		return NULL;
+
+	i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+	return NULL;
+}
+
+static const struct devs_id mpu3050_dev_id __initconst = {
+	.name = "mpu3050",
+	.type = SFI_DEV_TYPE_I2C,
+	.delay = 1,
+	.get_platform_data = &mpu3050_platform_data,
+};
+
+sfi_device(mpu3050_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic.c b/arch/x86/platform/intel-mid/device_libs/platform_msic.c
new file mode 100644
index 000000000000..9f4a775a69d6
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic.c
@@ -0,0 +1,87 @@
+/*
+ * platform_msic.c: MSIC platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/init.h>
+#include <linux/sfi.h>
+#include <linux/mfd/intel_msic.h>
+#include <asm/intel_scu_ipc.h>
+#include <asm/intel-mid.h>
+#include "platform_msic.h"
+
+struct intel_msic_platform_data msic_pdata;
+
+static struct resource msic_resources[] = {
+	{
+		.start	= INTEL_MSIC_IRQ_PHYS_BASE,
+		.end	= INTEL_MSIC_IRQ_PHYS_BASE + 64 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device msic_device = {
+	.name		= "intel_msic",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &msic_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(msic_resources),
+	.resource	= msic_resources,
+};
+
+static int msic_scu_status_change(struct notifier_block *nb,
+				  unsigned long code, void *data)
+{
+	if (code == SCU_DOWN) {
+		platform_device_unregister(&msic_device);
+		return 0;
+	}
+
+	return platform_device_register(&msic_device);
+}
+
+static int __init msic_init(void)
+{
+	static struct notifier_block msic_scu_notifier = {
+		.notifier_call	= msic_scu_status_change,
+	};
+
+	/*
+	 * We need to be sure that the SCU IPC is ready before MSIC device
+	 * can be registered.
+	 */
+	if (intel_mid_has_msic())
+		intel_scu_notifier_add(&msic_scu_notifier);
+
+	return 0;
+}
+arch_initcall(msic_init);
+
+/*
+ * msic_generic_platform_data - sets generic platform data for the block
+ * @info: pointer to the SFI device table entry for this block
+ * @block: MSIC block
+ *
+ * Function sets IRQ number from the SFI table entry for given device to
+ * the MSIC platform data.
+ */
+void *msic_generic_platform_data(void *info, enum intel_msic_block block)
+{
+	struct sfi_device_table_entry *entry = info;
+
+	BUG_ON(block < 0 || block >= INTEL_MSIC_BLOCK_LAST);
+	msic_pdata.irq[block] = entry->irq;
+
+	return NULL;
+}
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic.h b/arch/x86/platform/intel-mid/device_libs/platform_msic.h
new file mode 100644
index 000000000000..917eb56d77da
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic.h
@@ -0,0 +1,19 @@
+/*
+ * platform_msic.h: MSIC platform data header file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#ifndef _PLATFORM_MSIC_H_
+#define _PLATFORM_MSIC_H_
+
+extern struct intel_msic_platform_data msic_pdata;
+
+extern void *msic_generic_platform_data(void *info,
+			enum intel_msic_block block) __attribute__((weak));
+#endif
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c
new file mode 100644
index 000000000000..29629397d2b3
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c
@@ -0,0 +1,47 @@
+/*
+ * platform_msic_audio.c: MSIC audio platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/init.h>
+#include <linux/sfi.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/intel_msic.h>
+#include <asm/intel-mid.h>
+
+#include "platform_msic.h"
+#include "platform_ipc.h"
+
+static void *msic_audio_platform_data(void *info)
+{
+	struct platform_device *pdev;
+
+	pdev = platform_device_register_simple("sst-platform", -1, NULL, 0);
+
+	if (IS_ERR(pdev)) {
+		pr_err("failed to create audio platform device\n");
+		return NULL;
+	}
+
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_AUDIO);
+}
+
+static const struct devs_id msic_audio_dev_id __initconst = {
+	.name = "msic_audio",
+	.type = SFI_DEV_TYPE_IPC,
+	.delay = 1,
+	.get_platform_data = &msic_audio_platform_data,
+	.device_handler = &ipc_device_handler,
+};
+
+sfi_device(msic_audio_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c
new file mode 100644
index 000000000000..f446c33df1a8
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c
@@ -0,0 +1,37 @@
+/*
+ * platform_msic_battery.c: MSIC battery platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/init.h>
+#include <linux/sfi.h>
+#include <linux/mfd/intel_msic.h>
+#include <asm/intel-mid.h>
+
+#include "platform_msic.h"
+#include "platform_ipc.h"
+
+static void __init *msic_battery_platform_data(void *info)
+{
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_BATTERY);
+}
+
+static const struct devs_id msic_battery_dev_id __initconst = {
+	.name = "msic_battery",
+	.type = SFI_DEV_TYPE_IPC,
+	.delay = 1,
+	.get_platform_data = &msic_battery_platform_data,
+	.device_handler = &ipc_device_handler,
+};
+
+sfi_device(msic_battery_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c
new file mode 100644
index 000000000000..2a4f7b1dd917
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c
@@ -0,0 +1,48 @@
+/*
+ * platform_msic_gpio.c: MSIC GPIO platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/sfi.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/mfd/intel_msic.h>
+#include <asm/intel-mid.h>
+
+#include "platform_msic.h"
+#include "platform_ipc.h"
+
+static void __init *msic_gpio_platform_data(void *info)
+{
+	static struct intel_msic_gpio_pdata msic_gpio_pdata;
+
+	int gpio = get_gpio_by_name("msic_gpio_base");
+
+	if (gpio < 0)
+		return NULL;
+
+	msic_gpio_pdata.gpio_base = gpio;
+	msic_pdata.gpio = &msic_gpio_pdata;
+
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_GPIO);
+}
+
+static const struct devs_id msic_gpio_dev_id __initconst = {
+	.name = "msic_gpio",
+	.type = SFI_DEV_TYPE_IPC,
+	.delay = 1,
+	.get_platform_data = &msic_gpio_platform_data,
+	.device_handler = &ipc_device_handler,
+};
+
+sfi_device(msic_gpio_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c
new file mode 100644
index 000000000000..6497111ddb54
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c
@@ -0,0 +1,49 @@
+/*
+ * platform_msic_ocd.c: MSIC OCD platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/sfi.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/mfd/intel_msic.h>
+#include <asm/intel-mid.h>
+
+#include "platform_msic.h"
+#include "platform_ipc.h"
+
+static void __init *msic_ocd_platform_data(void *info)
+{
+	static struct intel_msic_ocd_pdata msic_ocd_pdata;
+	int gpio;
+
+	gpio = get_gpio_by_name("ocd_gpio");
+
+	if (gpio < 0)
+		return NULL;
+
+	msic_ocd_pdata.gpio = gpio;
+	msic_pdata.ocd = &msic_ocd_pdata;
+
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD);
+}
+
+static const struct devs_id msic_ocd_dev_id __initconst = {
+	.name = "msic_ocd",
+	.type = SFI_DEV_TYPE_IPC,
+	.delay = 1,
+	.get_platform_data = &msic_ocd_platform_data,
+	.device_handler = &ipc_device_handler,
+};
+
+sfi_device(msic_ocd_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c
new file mode 100644
index 000000000000..83a3459bc337
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c
@@ -0,0 +1,36 @@
+/*
+ * platform_msic_power_btn.c: MSIC power btn platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/sfi.h>
+#include <linux/init.h>
+#include <linux/mfd/intel_msic.h>
+#include <asm/intel-mid.h>
+
+#include "platform_msic.h"
+#include "platform_ipc.h"
+
+static void __init *msic_power_btn_platform_data(void *info)
+{
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN);
+}
+
+static const struct devs_id msic_power_btn_dev_id __initconst = {
+	.name = "msic_power_btn",
+	.type = SFI_DEV_TYPE_IPC,
+	.delay = 1,
+	.get_platform_data = &msic_power_btn_platform_data,
+	.device_handler = &ipc_device_handler,
+};
+
+sfi_device(msic_power_btn_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c
new file mode 100644
index 000000000000..a351878b96bc
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c
@@ -0,0 +1,37 @@
+/*
+ * platform_msic_thermal.c: msic_thermal platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/intel_msic.h>
+#include <asm/intel-mid.h>
+
+#include "platform_msic.h"
+#include "platform_ipc.h"
+
+static void __init *msic_thermal_platform_data(void *info)
+{
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_THERMAL);
+}
+
+static const struct devs_id msic_thermal_dev_id __initconst = {
+	.name = "msic_thermal",
+	.type = SFI_DEV_TYPE_IPC,
+	.delay = 1,
+	.get_platform_data = &msic_thermal_platform_data,
+	.device_handler = &ipc_device_handler,
+};
+
+sfi_device(msic_thermal_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_pmic_gpio.c b/arch/x86/platform/intel-mid/device_libs/platform_pmic_gpio.c
new file mode 100644
index 000000000000..d87182a09263
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_pmic_gpio.c
@@ -0,0 +1,54 @@
+/*
+ * platform_pmic_gpio.c: PMIC GPIO platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/sfi.h>
+#include <linux/intel_pmic_gpio.h>
+#include <asm/intel-mid.h>
+
+#include "platform_ipc.h"
+
+static void __init *pmic_gpio_platform_data(void *info)
+{
+	static struct intel_pmic_gpio_platform_data pmic_gpio_pdata;
+	int gpio_base = get_gpio_by_name("pmic_gpio_base");
+
+	if (gpio_base == -1)
+		gpio_base = 64;
+	pmic_gpio_pdata.gpio_base = gpio_base;
+	pmic_gpio_pdata.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
+	pmic_gpio_pdata.gpiointr = 0xffffeff8;
+
+	return &pmic_gpio_pdata;
+}
+
+static const struct devs_id pmic_gpio_spi_dev_id __initconst = {
+	.name = "pmic_gpio",
+	.type = SFI_DEV_TYPE_SPI,
+	.delay = 1,
+	.get_platform_data = &pmic_gpio_platform_data,
+};
+
+static const struct devs_id pmic_gpio_ipc_dev_id __initconst = {
+	.name = "pmic_gpio",
+	.type = SFI_DEV_TYPE_IPC,
+	.delay = 1,
+	.get_platform_data = &pmic_gpio_platform_data,
+	.device_handler = &ipc_device_handler
+};
+
+sfi_device(pmic_gpio_spi_dev_id);
+sfi_device(pmic_gpio_ipc_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c b/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c
new file mode 100644
index 000000000000..740fc757050c
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c
@@ -0,0 +1,36 @@
+/*
+ * platform_tc35876x.c: tc35876x platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/gpio.h>
+#include <linux/i2c/tc35876x.h>
+#include <asm/intel-mid.h>
+
+/*tc35876x DSI_LVDS bridge chip and panel platform data*/
+static void *tc35876x_platform_data(void *data)
+{
+	static struct tc35876x_platform_data pdata;
+
+	/* gpio pins set to -1 will not be used by the driver */
+	pdata.gpio_bridge_reset = get_gpio_by_name("LCMB_RXEN");
+	pdata.gpio_panel_bl_en = get_gpio_by_name("6S6P_BL_EN");
+	pdata.gpio_panel_vadd = get_gpio_by_name("EN_VREG_LCD_V3P3");
+
+	return &pdata;
+}
+
+static const struct devs_id tc35876x_dev_id __initconst = {
+	.name = "i2c_disp_brig",
+	.type = SFI_DEV_TYPE_I2C,
+	.get_platform_data = &tc35876x_platform_data,
+};
+
+sfi_device(tc35876x_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_tca6416.c b/arch/x86/platform/intel-mid/device_libs/platform_tca6416.c
new file mode 100644
index 000000000000..22881c9a6737
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_tca6416.c
@@ -0,0 +1,57 @@
+/*
+ * platform_tca6416.c: tca6416 platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/platform_data/pca953x.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <asm/intel-mid.h>
+
+#define TCA6416_NAME	"tca6416"
+#define TCA6416_BASE	"tca6416_base"
+#define TCA6416_INTR	"tca6416_int"
+
+static void *tca6416_platform_data(void *info)
+{
+	static struct pca953x_platform_data tca6416;
+	struct i2c_board_info *i2c_info = info;
+	int gpio_base, intr;
+	char base_pin_name[SFI_NAME_LEN + 1];
+	char intr_pin_name[SFI_NAME_LEN + 1];
+
+	strcpy(i2c_info->type, TCA6416_NAME);
+	strcpy(base_pin_name, TCA6416_BASE);
+	strcpy(intr_pin_name, TCA6416_INTR);
+
+	gpio_base = get_gpio_by_name(base_pin_name);
+	intr = get_gpio_by_name(intr_pin_name);
+
+	if (gpio_base == -1)
+		return NULL;
+	tca6416.gpio_base = gpio_base;
+	if (intr != -1) {
+		i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+		tca6416.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
+	} else {
+		i2c_info->irq = -1;
+		tca6416.irq_base = -1;
+	}
+	return &tca6416;
+}
+
+static const struct devs_id tca6416_dev_id __initconst = {
+	.name = "tca6416",
+	.type = SFI_DEV_TYPE_I2C,
+	.delay = 1,
+	.get_platform_data = &tca6416_platform_data,
+};
+
+sfi_device(tca6416_dev_id);
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 40915698b9b7..523a1c8f7f07 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -61,8 +61,6 @@ enum intel_mid_timer_options intel_mid_timer_options;
 enum intel_mid_cpu_type __intel_mid_cpu_chip;
 EXPORT_SYMBOL_GPL(__intel_mid_cpu_chip);
 
-static void __init ipc_device_handler(struct sfi_device_table_entry *pentry,
-			struct devs_id *dev);
 static void intel_mid_power_off(void)
 {
 }
@@ -213,420 +211,3 @@ static inline int __init setup_x86_intel_mid_timer(char *arg)
 }
 __setup("x86_intel_mid_timer=", setup_x86_intel_mid_timer);
 
-/* the offset for the mapping of global gpio pin to irq */
-#define INTEL_MID_IRQ_OFFSET 0x100
-
-static void __init *pmic_gpio_platform_data(void *info)
-{
-	static struct intel_pmic_gpio_platform_data pmic_gpio_pdata;
-	int gpio_base = get_gpio_by_name("pmic_gpio_base");
-
-	if (gpio_base == -1)
-		gpio_base = 64;
-	pmic_gpio_pdata.gpio_base = gpio_base;
-	pmic_gpio_pdata.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
-	pmic_gpio_pdata.gpiointr = 0xffffeff8;
-
-	return &pmic_gpio_pdata;
-}
-
-static void __init *max3111_platform_data(void *info)
-{
-	struct spi_board_info *spi_info = info;
-	int intr = get_gpio_by_name("max3111_int");
-
-	spi_info->mode = SPI_MODE_0;
-	if (intr == -1)
-		return NULL;
-	spi_info->irq = intr + INTEL_MID_IRQ_OFFSET;
-	return NULL;
-}
-
-/* we have multiple max7315 on the board ... */
-#define MAX7315_NUM 2
-static void __init *max7315_platform_data(void *info)
-{
-	static struct pca953x_platform_data max7315_pdata[MAX7315_NUM];
-	static int nr;
-	struct pca953x_platform_data *max7315 = &max7315_pdata[nr];
-	struct i2c_board_info *i2c_info = info;
-	int gpio_base, intr;
-	char base_pin_name[SFI_NAME_LEN + 1];
-	char intr_pin_name[SFI_NAME_LEN + 1];
-
-	if (nr == MAX7315_NUM) {
-		pr_err("too many max7315s, we only support %d\n",
-				MAX7315_NUM);
-		return NULL;
-	}
-	/* we have several max7315 on the board, we only need load several
-	 * instances of the same pca953x driver to cover them
-	 */
-	strcpy(i2c_info->type, "max7315");
-	if (nr++) {
-		sprintf(base_pin_name, "max7315_%d_base", nr);
-		sprintf(intr_pin_name, "max7315_%d_int", nr);
-	} else {
-		strcpy(base_pin_name, "max7315_base");
-		strcpy(intr_pin_name, "max7315_int");
-	}
-
-	gpio_base = get_gpio_by_name(base_pin_name);
-	intr = get_gpio_by_name(intr_pin_name);
-
-	if (gpio_base == -1)
-		return NULL;
-	max7315->gpio_base = gpio_base;
-	if (intr != -1) {
-		i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
-		max7315->irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
-	} else {
-		i2c_info->irq = -1;
-		max7315->irq_base = -1;
-	}
-	return max7315;
-}
-
-static void *tca6416_platform_data(void *info)
-{
-	static struct pca953x_platform_data tca6416;
-	struct i2c_board_info *i2c_info = info;
-	int gpio_base, intr;
-	char base_pin_name[SFI_NAME_LEN + 1];
-	char intr_pin_name[SFI_NAME_LEN + 1];
-
-	strcpy(i2c_info->type, "tca6416");
-	strcpy(base_pin_name, "tca6416_base");
-	strcpy(intr_pin_name, "tca6416_int");
-
-	gpio_base = get_gpio_by_name(base_pin_name);
-	intr = get_gpio_by_name(intr_pin_name);
-
-	if (gpio_base == -1)
-		return NULL;
-	tca6416.gpio_base = gpio_base;
-	if (intr != -1) {
-		i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
-		tca6416.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
-	} else {
-		i2c_info->irq = -1;
-		tca6416.irq_base = -1;
-	}
-	return &tca6416;
-}
-
-static void *mpu3050_platform_data(void *info)
-{
-	struct i2c_board_info *i2c_info = info;
-	int intr = get_gpio_by_name("mpu3050_int");
-
-	if (intr == -1)
-		return NULL;
-
-	i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
-	return NULL;
-}
-
-static void __init *emc1403_platform_data(void *info)
-{
-	static short intr2nd_pdata;
-	struct i2c_board_info *i2c_info = info;
-	int intr = get_gpio_by_name("thermal_int");
-	int intr2nd = get_gpio_by_name("thermal_alert");
-
-	if (intr == -1 || intr2nd == -1)
-		return NULL;
-
-	i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
-	intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET;
-
-	return &intr2nd_pdata;
-}
-
-static void __init *lis331dl_platform_data(void *info)
-{
-	static short intr2nd_pdata;
-	struct i2c_board_info *i2c_info = info;
-	int intr = get_gpio_by_name("accel_int");
-	int intr2nd = get_gpio_by_name("accel_2");
-
-	if (intr == -1 || intr2nd == -1)
-		return NULL;
-
-	i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
-	intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET;
-
-	return &intr2nd_pdata;
-}
-
-static void __init *no_platform_data(void *info)
-{
-	return NULL;
-}
-
-static struct resource msic_resources[] = {
-	{
-		.start	= INTEL_MSIC_IRQ_PHYS_BASE,
-		.end	= INTEL_MSIC_IRQ_PHYS_BASE + 64 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct intel_msic_platform_data msic_pdata;
-
-static struct platform_device msic_device = {
-	.name		= "intel_msic",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &msic_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(msic_resources),
-	.resource	= msic_resources,
-};
-
-static inline bool intel_mid_has_msic(void)
-{
-	return intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL;
-}
-
-static int msic_scu_status_change(struct notifier_block *nb,
-				  unsigned long code, void *data)
-{
-	if (code == SCU_DOWN) {
-		platform_device_unregister(&msic_device);
-		return 0;
-	}
-
-	return platform_device_register(&msic_device);
-}
-
-static int __init msic_init(void)
-{
-	static struct notifier_block msic_scu_notifier = {
-		.notifier_call	= msic_scu_status_change,
-	};
-
-	/*
-	 * We need to be sure that the SCU IPC is ready before MSIC device
-	 * can be registered.
-	 */
-	if (intel_mid_has_msic())
-		intel_scu_notifier_add(&msic_scu_notifier);
-
-	return 0;
-}
-arch_initcall(msic_init);
-
-/*
- * msic_generic_platform_data - sets generic platform data for the block
- * @info: pointer to the SFI device table entry for this block
- * @block: MSIC block
- *
- * Function sets IRQ number from the SFI table entry for given device to
- * the MSIC platform data.
- */
-static void *msic_generic_platform_data(void *info, enum intel_msic_block block)
-{
-	struct sfi_device_table_entry *entry = info;
-
-	BUG_ON(block < 0 || block >= INTEL_MSIC_BLOCK_LAST);
-	msic_pdata.irq[block] = entry->irq;
-
-	return no_platform_data(info);
-}
-
-static void *msic_battery_platform_data(void *info)
-{
-	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_BATTERY);
-}
-
-static void *msic_gpio_platform_data(void *info)
-{
-	static struct intel_msic_gpio_pdata pdata;
-	int gpio = get_gpio_by_name("msic_gpio_base");
-
-	if (gpio < 0)
-		return NULL;
-
-	pdata.gpio_base = gpio;
-	msic_pdata.gpio = &pdata;
-
-	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_GPIO);
-}
-
-static void *msic_audio_platform_data(void *info)
-{
-	struct platform_device *pdev;
-
-	pdev = platform_device_register_simple("sst-platform", -1, NULL, 0);
-	if (IS_ERR(pdev)) {
-		pr_err("failed to create audio platform device\n");
-		return NULL;
-	}
-
-	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_AUDIO);
-}
-
-static void *msic_power_btn_platform_data(void *info)
-{
-	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN);
-}
-
-static void *msic_ocd_platform_data(void *info)
-{
-	static struct intel_msic_ocd_pdata pdata;
-	int gpio = get_gpio_by_name("ocd_gpio");
-
-	if (gpio < 0)
-		return NULL;
-
-	pdata.gpio = gpio;
-	msic_pdata.ocd = &pdata;
-
-	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD);
-}
-
-static void *msic_thermal_platform_data(void *info)
-{
-	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_THERMAL);
-}
-
-/* tc35876x DSI-LVDS bridge chip and panel platform data */
-static void *tc35876x_platform_data(void *data)
-{
-	static struct tc35876x_platform_data pdata;
-
-	/* gpio pins set to -1 will not be used by the driver */
-	pdata.gpio_bridge_reset = get_gpio_by_name("LCMB_RXEN");
-	pdata.gpio_panel_bl_en = get_gpio_by_name("6S6P_BL_EN");
-	pdata.gpio_panel_vadd = get_gpio_by_name("EN_VREG_LCD_V3P3");
-
-	return &pdata;
-}
-
-static const struct devs_id __initconst device_ids[] = {
-	{"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data, NULL},
-	{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data, NULL},
-	{"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data, &ipc_device_handler},
-	{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data, NULL},
-	{"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data, NULL},
-	{"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data, NULL},
-	{"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data, NULL},
-	{"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data, NULL},
-	{"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data, NULL},
-	{"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data, &ipc_device_handler},
-	{"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data, NULL},
-	{"i2c_disp_brig", SFI_DEV_TYPE_I2C, 0, &tc35876x_platform_data, NULL},
-
-	/* MSIC subdevices */
-	{"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data, &ipc_device_handler},
-	{"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data, &ipc_device_handler},
-	{"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data, &ipc_device_handler},
-	{"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data, &ipc_device_handler},
-	{"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data, &ipc_device_handler},
-	{"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data, &ipc_device_handler},
-	{ 0 }
-};
-
-static void __init ipc_device_handler(struct sfi_device_table_entry *pentry,
-				struct devs_id *dev)
-{
-	struct platform_device *pdev;
-	void *pdata = NULL;
-	static struct resource res __initdata = {
-		.name = "IRQ",
-		.flags = IORESOURCE_IRQ,
-	};
-
-	pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
-		pentry->name, pentry->irq);
-
-	/*
-	 * We need to call platform init of IPC devices to fill misc_pdata
-	 * structure. It will be used in msic_init for initialization.
-	 */
-	if (dev != NULL)
-		pdata = dev->get_platform_data(pentry);
-
-	/*
-	 * On Medfield the platform device creation is handled by the MSIC
-	 * MFD driver so we don't need to do it here.
-	 */
-	if (intel_mid_has_msic())
-		return;
-
-	pdev = platform_device_alloc(pentry->name, 0);
-	if (pdev == NULL) {
-		pr_err("out of memory for SFI platform device '%s'.\n",
-			pentry->name);
-		return;
-	}
-	res.start = pentry->irq;
-	platform_device_add_resources(pdev, &res, 1);
-
-	pdev->dev.platform_data = pdata;
-	intel_scu_device_register(pdev);
-}
-
-
-/*
- * we will search these buttons in SFI GPIO table (by name)
- * and register them dynamically. Please add all possible
- * buttons here, we will shrink them if no GPIO found.
- */
-static struct gpio_keys_button gpio_button[] = {
-	{KEY_POWER,		-1, 1, "power_btn",	EV_KEY, 0, 3000},
-	{KEY_PROG1,		-1, 1, "prog_btn1",	EV_KEY, 0, 20},
-	{KEY_PROG2,		-1, 1, "prog_btn2",	EV_KEY, 0, 20},
-	{SW_LID,		-1, 1, "lid_switch",	EV_SW,  0, 20},
-	{KEY_VOLUMEUP,		-1, 1, "vol_up",	EV_KEY, 0, 20},
-	{KEY_VOLUMEDOWN,	-1, 1, "vol_down",	EV_KEY, 0, 20},
-	{KEY_CAMERA,		-1, 1, "camera_full",	EV_KEY, 0, 20},
-	{KEY_CAMERA_FOCUS,	-1, 1, "camera_half",	EV_KEY, 0, 20},
-	{SW_KEYPAD_SLIDE,	-1, 1, "MagSw1",	EV_SW,  0, 20},
-	{SW_KEYPAD_SLIDE,	-1, 1, "MagSw2",	EV_SW,  0, 20},
-};
-
-static struct gpio_keys_platform_data intel_mid_gpio_keys = {
-	.buttons	= gpio_button,
-	.rep		= 1,
-	.nbuttons	= -1, /* will fill it after search */
-};
-
-static struct platform_device pb_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &intel_mid_gpio_keys,
-	},
-};
-
-/*
- * Shrink the non-existent buttons, register the gpio button
- * device if there is some
- */
-static int __init pb_keys_init(void)
-{
-	struct gpio_keys_button *gb = gpio_button;
-	int i, num, good = 0;
-
-	num = sizeof(gpio_button) / sizeof(struct gpio_keys_button);
-	for (i = 0; i < num; i++) {
-		gb[i].gpio = get_gpio_by_name(gb[i].desc);
-		pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc,
-					gb[i].gpio);
-		if (gb[i].gpio == -1)
-			continue;
-
-		if (i != good)
-			gb[good] = gb[i];
-		good++;
-	}
-
-	if (good) {
-		intel_mid_gpio_keys.nbuttons = good;
-		return platform_device_register(&pb_device);
-	}
-	return 0;
-}
-late_initcall(pb_keys_init);
\ No newline at end of file
diff --git a/arch/x86/platform/intel-mid/sfi.c b/arch/x86/platform/intel-mid/sfi.c
index 3f1c171e5ce3..c84c1ca396bf 100644
--- a/arch/x86/platform/intel-mid/sfi.c
+++ b/arch/x86/platform/intel-mid/sfi.c
@@ -42,7 +42,6 @@
 #include <asm/intel_scu_ipc.h>
 #include <asm/apb_timer.h>
 #include <asm/reboot.h>
-#include "intel_mid_weak_decls.h"
 
 #define	SFI_SIG_OEM0	"OEM0"
 #define MAX_IPCDEVS	24
@@ -403,19 +402,20 @@ static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry,
 		i2c_register_board_info(pentry->host_num, &i2c_info, 1);
 }
 
+extern struct devs_id *const __x86_intel_mid_dev_start[],
+		      *const __x86_intel_mid_dev_end[];
+
 static struct devs_id __init *get_device_id(u8 type, char *name)
 {
-	struct devs_id *dev = device_ids;
-
-	if (device_ids == NULL)
-		return NULL;
+	struct devs_id *const *dev_table;
 
-	while (dev->name[0]) {
+	for (dev_table = __x86_intel_mid_dev_start;
+			dev_table < __x86_intel_mid_dev_end; dev_table++) {
+		struct devs_id *dev = *dev_table;
 		if (dev->type == type &&
 			!strncmp(dev->name, name, SFI_NAME_LEN)) {
 			return dev;
 		}
-		dev++;
 	}
 
 	return NULL;
diff --git a/include/linux/sfi.h b/include/linux/sfi.h
index fe817918b30e..d9b436f09925 100644
--- a/include/linux/sfi.h
+++ b/include/linux/sfi.h
@@ -59,6 +59,9 @@
 #ifndef _LINUX_SFI_H
 #define _LINUX_SFI_H
 
+#include <linux/init.h>
+#include <linux/types.h>
+
 /* Table signatures reserved by the SFI specification */
 #define SFI_SIG_SYST		"SYST"
 #define SFI_SIG_FREQ		"FREQ"
-- 
cgit v1.2.3


From 8258e268c15a29c09d7c88d91a948bdf729433d8 Mon Sep 17 00:00:00 2001
From: Tiejun Chen
Date: Thu, 20 Jun 2013 18:28:29 +0800
Subject: powerpc/kgdb: use DEFINE_PER_CPU to allocate kgdb's thread_info

Use DEFINE_PER_CPU to allocate thread_info statically instead of kmalloc().
This can avoid introducing more memory check codes.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
[scottwood@freescale.com: wrapped long line]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/kgdb.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index c1eef241017a..83e89d310734 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -151,15 +151,16 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs)
 	return 1;
 }
 
+static DEFINE_PER_CPU(struct thread_info, kgdb_thread_info);
 static int kgdb_singlestep(struct pt_regs *regs)
 {
 	struct thread_info *thread_info, *exception_thread_info;
-	struct thread_info *backup_current_thread_info;
+	struct thread_info *backup_current_thread_info =
+		&__get_cpu_var(kgdb_thread_info);
 
 	if (user_mode(regs))
 		return 0;
 
-	backup_current_thread_info = kmalloc(sizeof(struct thread_info), GFP_KERNEL);
 	/*
 	 * On Book E and perhaps other processors, singlestep is handled on
 	 * the critical exception stack.  This causes current_thread_info()
@@ -185,7 +186,6 @@ static int kgdb_singlestep(struct pt_regs *regs)
 		/* Restore current_thread_info lastly. */
 		memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info);
 
-	kfree(backup_current_thread_info);
 	return 1;
 }
 
-- 
cgit v1.2.3


From 660970fe97f86c0175576b4a942ebd29fb2ec64e Mon Sep 17 00:00:00 2001
From: Bharat Bhushan
Date: Thu, 4 Jul 2013 11:45:45 +0530
Subject: powerpc: remove unnecessary line continuations

Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/process.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 8649a3d629e1..83079ef159b9 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -327,7 +327,7 @@ static void set_debug_reg_defaults(struct thread_struct *thread)
 	/*
 	 * Force User/Supervisor bits to b11 (user-only MSR[PR]=1)
 	 */
-	thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US |	\
+	thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US |
 			DBCR1_IAC3US | DBCR1_IAC4US;
 	/*
 	 * Force Data Address Compare User/Supervisor bits to be User-only
-- 
cgit v1.2.3


From 51ae8d4a2b9e4aa9a502061b9c39168e08829b94 Mon Sep 17 00:00:00 2001
From: Bharat Bhushan
Date: Thu, 4 Jul 2013 11:45:46 +0530
Subject: powerpc: move debug registers in a structure

This way we can use same data type struct with KVM and
also help in using other debug related function.

Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Acked-by: Michael Neuling <mikey@neuling.org>
[scottwood@freescale.com: removed obvious debug_reg comment]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/include/asm/processor.h |  34 ++++----
 arch/powerpc/include/asm/reg_booke.h |   8 +-
 arch/powerpc/kernel/asm-offsets.c    |   2 +-
 arch/powerpc/kernel/process.c        |  42 +++++-----
 arch/powerpc/kernel/ptrace.c         | 154 +++++++++++++++++------------------
 arch/powerpc/kernel/ptrace32.c       |   2 +-
 arch/powerpc/kernel/signal_32.c      |   6 +-
 arch/powerpc/kernel/traps.c          |  35 ++++----
 8 files changed, 144 insertions(+), 139 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index c1583070937d..7794b2b04eb2 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -167,21 +167,7 @@ struct thread_vr_state {
 	vector128	vscr __attribute__((aligned(16)));
 };
 
-struct thread_struct {
-	unsigned long	ksp;		/* Kernel stack pointer */
-#ifdef CONFIG_PPC64
-	unsigned long	ksp_vsid;
-#endif
-	struct pt_regs	*regs;		/* Pointer to saved register state */
-	mm_segment_t	fs;		/* for get_fs() validation */
-#ifdef CONFIG_BOOKE
-	/* BookE base exception scratch space; align on cacheline */
-	unsigned long	normsave[8] ____cacheline_aligned;
-#endif
-#ifdef CONFIG_PPC32
-	void		*pgdir;		/* root of page-table tree */
-	unsigned long	ksp_limit;	/* if ksp <= ksp_limit stack overflow */
-#endif
+struct debug_reg {
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
 	/*
 	 * The following help to manage the use of Debug Control Registers
@@ -218,6 +204,24 @@ struct thread_struct {
 	unsigned long	dvc2;
 #endif
 #endif
+};
+
+struct thread_struct {
+	unsigned long	ksp;		/* Kernel stack pointer */
+#ifdef CONFIG_PPC64
+	unsigned long	ksp_vsid;
+#endif
+	struct pt_regs	*regs;		/* Pointer to saved register state */
+	mm_segment_t	fs;		/* for get_fs() validation */
+#ifdef CONFIG_BOOKE
+	/* BookE base exception scratch space; align on cacheline */
+	unsigned long	normsave[8] ____cacheline_aligned;
+#endif
+#ifdef CONFIG_PPC32
+	void		*pgdir;		/* root of page-table tree */
+	unsigned long	ksp_limit;	/* if ksp <= ksp_limit stack overflow */
+#endif
+	struct debug_reg debug;
 	struct thread_fp_state	fp_state;
 	struct thread_fp_state	*fp_save_area;
 	int		fpexc_mode;	/* floating-point exception mode */
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index ed8f836da094..2e31aacd8acc 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -381,7 +381,7 @@
 #define DBCR0_IA34T	0x00004000	/* Instr Addr 3-4 range Toggle */
 #define DBCR0_FT	0x00000001	/* Freeze Timers on debug event */
 
-#define dbcr_iac_range(task)	((task)->thread.dbcr0)
+#define dbcr_iac_range(task)	((task)->thread.debug.dbcr0)
 #define DBCR_IAC12I	DBCR0_IA12			/* Range Inclusive */
 #define DBCR_IAC12X	(DBCR0_IA12 | DBCR0_IA12X)	/* Range Exclusive */
 #define DBCR_IAC12MODE	(DBCR0_IA12 | DBCR0_IA12X)	/* IAC 1-2 Mode Bits */
@@ -395,7 +395,7 @@
 #define DBCR1_DAC1W	0x20000000	/* DAC1 Write Debug Event */
 #define DBCR1_DAC2W	0x10000000	/* DAC2 Write Debug Event */
 
-#define dbcr_dac(task)	((task)->thread.dbcr1)
+#define dbcr_dac(task)	((task)->thread.debug.dbcr1)
 #define DBCR_DAC1R	DBCR1_DAC1R
 #define DBCR_DAC1W	DBCR1_DAC1W
 #define DBCR_DAC2R	DBCR1_DAC2R
@@ -441,7 +441,7 @@
 #define DBCR0_CRET	0x00000020	/* Critical Return Debug Event */
 #define DBCR0_FT	0x00000001	/* Freeze Timers on debug event */
 
-#define dbcr_dac(task)	((task)->thread.dbcr0)
+#define dbcr_dac(task)	((task)->thread.debug.dbcr0)
 #define DBCR_DAC1R	DBCR0_DAC1R
 #define DBCR_DAC1W	DBCR0_DAC1W
 #define DBCR_DAC2R	DBCR0_DAC2R
@@ -475,7 +475,7 @@
 #define DBCR1_IAC34MX	0x000000C0	/* Instr Addr 3-4 range eXclusive */
 #define DBCR1_IAC34AT	0x00000001	/* Instr Addr 3-4 range Toggle */
 
-#define dbcr_iac_range(task)	((task)->thread.dbcr1)
+#define dbcr_iac_range(task)	((task)->thread.debug.dbcr1)
 #define DBCR_IAC12I	DBCR1_IAC12M	/* Range Inclusive */
 #define DBCR_IAC12X	DBCR1_IAC12MX	/* Range Exclusive */
 #define DBCR_IAC12MODE	DBCR1_IAC12MX	/* IAC 1-2 Mode Bits */
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 6278edddc3f8..e60a3697932c 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -115,7 +115,7 @@ int main(void)
 #endif /* CONFIG_SPE */
 #endif /* CONFIG_PPC64 */
 #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0));
+	DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, debug.dbcr0));
 #endif
 #ifdef CONFIG_KVM_BOOK3S_32_HANDLER
 	DEFINE(THREAD_KVM_SVCPU, offsetof(struct thread_struct, kvm_shadow_vcpu));
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 83079ef159b9..3db9d7e39f39 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -314,28 +314,28 @@ static DEFINE_PER_CPU(struct arch_hw_breakpoint, current_brk);
  */
 static void set_debug_reg_defaults(struct thread_struct *thread)
 {
-	thread->iac1 = thread->iac2 = 0;
+	thread->debug.iac1 = thread->debug.iac2 = 0;
 #if CONFIG_PPC_ADV_DEBUG_IACS > 2
-	thread->iac3 = thread->iac4 = 0;
+	thread->debug.iac3 = thread->debug.iac4 = 0;
 #endif
-	thread->dac1 = thread->dac2 = 0;
+	thread->debug.dac1 = thread->debug.dac2 = 0;
 #if CONFIG_PPC_ADV_DEBUG_DVCS > 0
-	thread->dvc1 = thread->dvc2 = 0;
+	thread->debug.dvc1 = thread->debug.dvc2 = 0;
 #endif
-	thread->dbcr0 = 0;
+	thread->debug.dbcr0 = 0;
 #ifdef CONFIG_BOOKE
 	/*
 	 * Force User/Supervisor bits to b11 (user-only MSR[PR]=1)
 	 */
-	thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US |
+	thread->debug.dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US |
 			DBCR1_IAC3US | DBCR1_IAC4US;
 	/*
 	 * Force Data Address Compare User/Supervisor bits to be User-only
 	 * (0b11 MSR[PR]=1) and set all other bits in DBCR2 register to be 0.
 	 */
-	thread->dbcr2 = DBCR2_DAC1US | DBCR2_DAC2US;
+	thread->debug.dbcr2 = DBCR2_DAC1US | DBCR2_DAC2US;
 #else
-	thread->dbcr1 = 0;
+	thread->debug.dbcr1 = 0;
 #endif
 }
 
@@ -348,22 +348,22 @@ static void prime_debug_regs(struct thread_struct *thread)
 	 */
 	mtmsr(mfmsr() & ~MSR_DE);
 
-	mtspr(SPRN_IAC1, thread->iac1);
-	mtspr(SPRN_IAC2, thread->iac2);
+	mtspr(SPRN_IAC1, thread->debug.iac1);
+	mtspr(SPRN_IAC2, thread->debug.iac2);
 #if CONFIG_PPC_ADV_DEBUG_IACS > 2
-	mtspr(SPRN_IAC3, thread->iac3);
-	mtspr(SPRN_IAC4, thread->iac4);
+	mtspr(SPRN_IAC3, thread->debug.iac3);
+	mtspr(SPRN_IAC4, thread->debug.iac4);
 #endif
-	mtspr(SPRN_DAC1, thread->dac1);
-	mtspr(SPRN_DAC2, thread->dac2);
+	mtspr(SPRN_DAC1, thread->debug.dac1);
+	mtspr(SPRN_DAC2, thread->debug.dac2);
 #if CONFIG_PPC_ADV_DEBUG_DVCS > 0
-	mtspr(SPRN_DVC1, thread->dvc1);
-	mtspr(SPRN_DVC2, thread->dvc2);
+	mtspr(SPRN_DVC1, thread->debug.dvc1);
+	mtspr(SPRN_DVC2, thread->debug.dvc2);
 #endif
-	mtspr(SPRN_DBCR0, thread->dbcr0);
-	mtspr(SPRN_DBCR1, thread->dbcr1);
+	mtspr(SPRN_DBCR0, thread->debug.dbcr0);
+	mtspr(SPRN_DBCR1, thread->debug.dbcr1);
 #ifdef CONFIG_BOOKE
-	mtspr(SPRN_DBCR2, thread->dbcr2);
+	mtspr(SPRN_DBCR2, thread->debug.dbcr2);
 #endif
 }
 /*
@@ -373,8 +373,8 @@ static void prime_debug_regs(struct thread_struct *thread)
  */
 static void switch_booke_debug_regs(struct thread_struct *new_thread)
 {
-	if ((current->thread.dbcr0 & DBCR0_IDM)
-		|| (new_thread->dbcr0 & DBCR0_IDM))
+	if ((current->thread.debug.dbcr0 & DBCR0_IDM)
+		|| (new_thread->debug.dbcr0 & DBCR0_IDM))
 			prime_debug_regs(new_thread);
 }
 #else	/* !CONFIG_PPC_ADV_DEBUG_REGS */
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 1ca589c9ec6d..aedfd41d354c 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -855,8 +855,8 @@ void user_enable_single_step(struct task_struct *task)
 
 	if (regs != NULL) {
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
-		task->thread.dbcr0 &= ~DBCR0_BT;
-		task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
+		task->thread.debug.dbcr0 &= ~DBCR0_BT;
+		task->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC;
 		regs->msr |= MSR_DE;
 #else
 		regs->msr &= ~MSR_BE;
@@ -872,8 +872,8 @@ void user_enable_block_step(struct task_struct *task)
 
 	if (regs != NULL) {
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
-		task->thread.dbcr0 &= ~DBCR0_IC;
-		task->thread.dbcr0 = DBCR0_IDM | DBCR0_BT;
+		task->thread.debug.dbcr0 &= ~DBCR0_IC;
+		task->thread.debug.dbcr0 = DBCR0_IDM | DBCR0_BT;
 		regs->msr |= MSR_DE;
 #else
 		regs->msr &= ~MSR_SE;
@@ -895,16 +895,16 @@ void user_disable_single_step(struct task_struct *task)
 		 * And, after doing so, if all debug flags are off, turn
 		 * off DBCR0(IDM) and MSR(DE) .... Torez
 		 */
-		task->thread.dbcr0 &= ~DBCR0_IC;
+		task->thread.debug.dbcr0 &= ~DBCR0_IC;
 		/*
 		 * Test to see if any of the DBCR_ACTIVE_EVENTS bits are set.
 		 */
-		if (!DBCR_ACTIVE_EVENTS(task->thread.dbcr0,
-					task->thread.dbcr1)) {
+		if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0,
+					task->thread.debug.dbcr1)) {
 			/*
 			 * All debug events were off.....
 			 */
-			task->thread.dbcr0 &= ~DBCR0_IDM;
+			task->thread.debug.dbcr0 &= ~DBCR0_IDM;
 			regs->msr &= ~MSR_DE;
 		}
 #else
@@ -1023,14 +1023,14 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 	 */
 
 	/* DAC's hold the whole address without any mode flags */
-	task->thread.dac1 = data & ~0x3UL;
+	task->thread.debug.dac1 = data & ~0x3UL;
 
-	if (task->thread.dac1 == 0) {
+	if (task->thread.debug.dac1 == 0) {
 		dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W);
-		if (!DBCR_ACTIVE_EVENTS(task->thread.dbcr0,
-					task->thread.dbcr1)) {
+		if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0,
+					task->thread.debug.dbcr1)) {
 			task->thread.regs->msr &= ~MSR_DE;
-			task->thread.dbcr0 &= ~DBCR0_IDM;
+			task->thread.debug.dbcr0 &= ~DBCR0_IDM;
 		}
 		return 0;
 	}
@@ -1042,7 +1042,7 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 
 	/* Set the Internal Debugging flag (IDM bit 1) for the DBCR0
 	   register */
-	task->thread.dbcr0 |= DBCR0_IDM;
+	task->thread.debug.dbcr0 |= DBCR0_IDM;
 
 	/* Check for write and read flags and set DBCR0
 	   accordingly */
@@ -1072,10 +1072,10 @@ static long set_instruction_bp(struct task_struct *child,
 			      struct ppc_hw_breakpoint *bp_info)
 {
 	int slot;
-	int slot1_in_use = ((child->thread.dbcr0 & DBCR0_IAC1) != 0);
-	int slot2_in_use = ((child->thread.dbcr0 & DBCR0_IAC2) != 0);
-	int slot3_in_use = ((child->thread.dbcr0 & DBCR0_IAC3) != 0);
-	int slot4_in_use = ((child->thread.dbcr0 & DBCR0_IAC4) != 0);
+	int slot1_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC1) != 0);
+	int slot2_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC2) != 0);
+	int slot3_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC3) != 0);
+	int slot4_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC4) != 0);
 
 	if (dbcr_iac_range(child) & DBCR_IAC12MODE)
 		slot2_in_use = 1;
@@ -1094,9 +1094,9 @@ static long set_instruction_bp(struct task_struct *child,
 		/* We need a pair of IAC regsisters */
 		if ((!slot1_in_use) && (!slot2_in_use)) {
 			slot = 1;
-			child->thread.iac1 = bp_info->addr;
-			child->thread.iac2 = bp_info->addr2;
-			child->thread.dbcr0 |= DBCR0_IAC1;
+			child->thread.debug.iac1 = bp_info->addr;
+			child->thread.debug.iac2 = bp_info->addr2;
+			child->thread.debug.dbcr0 |= DBCR0_IAC1;
 			if (bp_info->addr_mode ==
 					PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
 				dbcr_iac_range(child) |= DBCR_IAC12X;
@@ -1105,9 +1105,9 @@ static long set_instruction_bp(struct task_struct *child,
 #if CONFIG_PPC_ADV_DEBUG_IACS > 2
 		} else if ((!slot3_in_use) && (!slot4_in_use)) {
 			slot = 3;
-			child->thread.iac3 = bp_info->addr;
-			child->thread.iac4 = bp_info->addr2;
-			child->thread.dbcr0 |= DBCR0_IAC3;
+			child->thread.debug.iac3 = bp_info->addr;
+			child->thread.debug.iac4 = bp_info->addr2;
+			child->thread.debug.dbcr0 |= DBCR0_IAC3;
 			if (bp_info->addr_mode ==
 					PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
 				dbcr_iac_range(child) |= DBCR_IAC34X;
@@ -1127,30 +1127,30 @@ static long set_instruction_bp(struct task_struct *child,
 			 */
 			if (slot2_in_use || (slot3_in_use == slot4_in_use)) {
 				slot = 1;
-				child->thread.iac1 = bp_info->addr;
-				child->thread.dbcr0 |= DBCR0_IAC1;
+				child->thread.debug.iac1 = bp_info->addr;
+				child->thread.debug.dbcr0 |= DBCR0_IAC1;
 				goto out;
 			}
 		}
 		if (!slot2_in_use) {
 			slot = 2;
-			child->thread.iac2 = bp_info->addr;
-			child->thread.dbcr0 |= DBCR0_IAC2;
+			child->thread.debug.iac2 = bp_info->addr;
+			child->thread.debug.dbcr0 |= DBCR0_IAC2;
 #if CONFIG_PPC_ADV_DEBUG_IACS > 2
 		} else if (!slot3_in_use) {
 			slot = 3;
-			child->thread.iac3 = bp_info->addr;
-			child->thread.dbcr0 |= DBCR0_IAC3;
+			child->thread.debug.iac3 = bp_info->addr;
+			child->thread.debug.dbcr0 |= DBCR0_IAC3;
 		} else if (!slot4_in_use) {
 			slot = 4;
-			child->thread.iac4 = bp_info->addr;
-			child->thread.dbcr0 |= DBCR0_IAC4;
+			child->thread.debug.iac4 = bp_info->addr;
+			child->thread.debug.dbcr0 |= DBCR0_IAC4;
 #endif
 		} else
 			return -ENOSPC;
 	}
 out:
-	child->thread.dbcr0 |= DBCR0_IDM;
+	child->thread.debug.dbcr0 |= DBCR0_IDM;
 	child->thread.regs->msr |= MSR_DE;
 
 	return slot;
@@ -1160,49 +1160,49 @@ static int del_instruction_bp(struct task_struct *child, int slot)
 {
 	switch (slot) {
 	case 1:
-		if ((child->thread.dbcr0 & DBCR0_IAC1) == 0)
+		if ((child->thread.debug.dbcr0 & DBCR0_IAC1) == 0)
 			return -ENOENT;
 
 		if (dbcr_iac_range(child) & DBCR_IAC12MODE) {
 			/* address range - clear slots 1 & 2 */
-			child->thread.iac2 = 0;
+			child->thread.debug.iac2 = 0;
 			dbcr_iac_range(child) &= ~DBCR_IAC12MODE;
 		}
-		child->thread.iac1 = 0;
-		child->thread.dbcr0 &= ~DBCR0_IAC1;
+		child->thread.debug.iac1 = 0;
+		child->thread.debug.dbcr0 &= ~DBCR0_IAC1;
 		break;
 	case 2:
-		if ((child->thread.dbcr0 & DBCR0_IAC2) == 0)
+		if ((child->thread.debug.dbcr0 & DBCR0_IAC2) == 0)
 			return -ENOENT;
 
 		if (dbcr_iac_range(child) & DBCR_IAC12MODE)
 			/* used in a range */
 			return -EINVAL;
-		child->thread.iac2 = 0;
-		child->thread.dbcr0 &= ~DBCR0_IAC2;
+		child->thread.debug.iac2 = 0;
+		child->thread.debug.dbcr0 &= ~DBCR0_IAC2;
 		break;
 #if CONFIG_PPC_ADV_DEBUG_IACS > 2
 	case 3:
-		if ((child->thread.dbcr0 & DBCR0_IAC3) == 0)
+		if ((child->thread.debug.dbcr0 & DBCR0_IAC3) == 0)
 			return -ENOENT;
 
 		if (dbcr_iac_range(child) & DBCR_IAC34MODE) {
 			/* address range - clear slots 3 & 4 */
-			child->thread.iac4 = 0;
+			child->thread.debug.iac4 = 0;
 			dbcr_iac_range(child) &= ~DBCR_IAC34MODE;
 		}
-		child->thread.iac3 = 0;
-		child->thread.dbcr0 &= ~DBCR0_IAC3;
+		child->thread.debug.iac3 = 0;
+		child->thread.debug.dbcr0 &= ~DBCR0_IAC3;
 		break;
 	case 4:
-		if ((child->thread.dbcr0 & DBCR0_IAC4) == 0)
+		if ((child->thread.debug.dbcr0 & DBCR0_IAC4) == 0)
 			return -ENOENT;
 
 		if (dbcr_iac_range(child) & DBCR_IAC34MODE)
 			/* Used in a range */
 			return -EINVAL;
-		child->thread.iac4 = 0;
-		child->thread.dbcr0 &= ~DBCR0_IAC4;
+		child->thread.debug.iac4 = 0;
+		child->thread.debug.dbcr0 &= ~DBCR0_IAC4;
 		break;
 #endif
 	default:
@@ -1232,18 +1232,18 @@ static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
 			dbcr_dac(child) |= DBCR_DAC1R;
 		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
 			dbcr_dac(child) |= DBCR_DAC1W;
-		child->thread.dac1 = (unsigned long)bp_info->addr;
+		child->thread.debug.dac1 = (unsigned long)bp_info->addr;
 #if CONFIG_PPC_ADV_DEBUG_DVCS > 0
 		if (byte_enable) {
-			child->thread.dvc1 =
+			child->thread.debug.dvc1 =
 				(unsigned long)bp_info->condition_value;
-			child->thread.dbcr2 |=
+			child->thread.debug.dbcr2 |=
 				((byte_enable << DBCR2_DVC1BE_SHIFT) |
 				 (condition_mode << DBCR2_DVC1M_SHIFT));
 		}
 #endif
 #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
-	} else if (child->thread.dbcr2 & DBCR2_DAC12MODE) {
+	} else if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) {
 		/* Both dac1 and dac2 are part of a range */
 		return -ENOSPC;
 #endif
@@ -1253,19 +1253,19 @@ static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
 			dbcr_dac(child) |= DBCR_DAC2R;
 		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
 			dbcr_dac(child) |= DBCR_DAC2W;
-		child->thread.dac2 = (unsigned long)bp_info->addr;
+		child->thread.debug.dac2 = (unsigned long)bp_info->addr;
 #if CONFIG_PPC_ADV_DEBUG_DVCS > 0
 		if (byte_enable) {
-			child->thread.dvc2 =
+			child->thread.debug.dvc2 =
 				(unsigned long)bp_info->condition_value;
-			child->thread.dbcr2 |=
+			child->thread.debug.dbcr2 |=
 				((byte_enable << DBCR2_DVC2BE_SHIFT) |
 				 (condition_mode << DBCR2_DVC2M_SHIFT));
 		}
 #endif
 	} else
 		return -ENOSPC;
-	child->thread.dbcr0 |= DBCR0_IDM;
+	child->thread.debug.dbcr0 |= DBCR0_IDM;
 	child->thread.regs->msr |= MSR_DE;
 
 	return slot + 4;
@@ -1277,32 +1277,32 @@ static int del_dac(struct task_struct *child, int slot)
 		if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0)
 			return -ENOENT;
 
-		child->thread.dac1 = 0;
+		child->thread.debug.dac1 = 0;
 		dbcr_dac(child) &= ~(DBCR_DAC1R | DBCR_DAC1W);
 #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
-		if (child->thread.dbcr2 & DBCR2_DAC12MODE) {
-			child->thread.dac2 = 0;
-			child->thread.dbcr2 &= ~DBCR2_DAC12MODE;
+		if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) {
+			child->thread.debug.dac2 = 0;
+			child->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE;
 		}
-		child->thread.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE);
+		child->thread.debug.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE);
 #endif
 #if CONFIG_PPC_ADV_DEBUG_DVCS > 0
-		child->thread.dvc1 = 0;
+		child->thread.debug.dvc1 = 0;
 #endif
 	} else if (slot == 2) {
 		if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0)
 			return -ENOENT;
 
 #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
-		if (child->thread.dbcr2 & DBCR2_DAC12MODE)
+		if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE)
 			/* Part of a range */
 			return -EINVAL;
-		child->thread.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE);
+		child->thread.debug.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE);
 #endif
 #if CONFIG_PPC_ADV_DEBUG_DVCS > 0
-		child->thread.dvc2 = 0;
+		child->thread.debug.dvc2 = 0;
 #endif
-		child->thread.dac2 = 0;
+		child->thread.debug.dac2 = 0;
 		dbcr_dac(child) &= ~(DBCR_DAC2R | DBCR_DAC2W);
 	} else
 		return -EINVAL;
@@ -1344,22 +1344,22 @@ static int set_dac_range(struct task_struct *child,
 			return -EIO;
 	}
 
-	if (child->thread.dbcr0 &
+	if (child->thread.debug.dbcr0 &
 	    (DBCR0_DAC1R | DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W))
 		return -ENOSPC;
 
 	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
-		child->thread.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM);
+		child->thread.debug.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM);
 	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
-		child->thread.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM);
-	child->thread.dac1 = bp_info->addr;
-	child->thread.dac2 = bp_info->addr2;
+		child->thread.debug.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM);
+	child->thread.debug.dac1 = bp_info->addr;
+	child->thread.debug.dac2 = bp_info->addr2;
 	if (mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
-		child->thread.dbcr2  |= DBCR2_DAC12M;
+		child->thread.debug.dbcr2  |= DBCR2_DAC12M;
 	else if (mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
-		child->thread.dbcr2  |= DBCR2_DAC12MX;
+		child->thread.debug.dbcr2  |= DBCR2_DAC12MX;
 	else	/* PPC_BREAKPOINT_MODE_MASK */
-		child->thread.dbcr2  |= DBCR2_DAC12MM;
+		child->thread.debug.dbcr2  |= DBCR2_DAC12MM;
 	child->thread.regs->msr |= MSR_DE;
 
 	return 5;
@@ -1490,9 +1490,9 @@ static long ppc_del_hwdebug(struct task_struct *child, long data)
 		rc = del_dac(child, (int)data - 4);
 
 	if (!rc) {
-		if (!DBCR_ACTIVE_EVENTS(child->thread.dbcr0,
-					child->thread.dbcr1)) {
-			child->thread.dbcr0 &= ~DBCR0_IDM;
+		if (!DBCR_ACTIVE_EVENTS(child->thread.debug.dbcr0,
+					child->thread.debug.dbcr1)) {
+			child->thread.debug.dbcr0 &= ~DBCR0_IDM;
 			child->thread.regs->msr &= ~MSR_DE;
 		}
 	}
@@ -1670,7 +1670,7 @@ long arch_ptrace(struct task_struct *child, long request,
 		if (addr > 0)
 			break;
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
-		ret = put_user(child->thread.dac1, datalp);
+		ret = put_user(child->thread.debug.dac1, datalp);
 #else
 		dabr_fake = ((child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) |
 			     (child->thread.hw_brk.type & HW_BRK_TYPE_DABR));
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index 097f8dc426a0..f52b7db327c8 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -266,7 +266,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 		if (addr > 0)
 			break;
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
-		ret = put_user(child->thread.dac1, (u32 __user *)data);
+		ret = put_user(child->thread.debug.dac1, (u32 __user *)data);
 #else
 		dabr_fake = (
 			(child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) |
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index c094e28b3f10..1a410aa57fb7 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -1312,7 +1312,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx,
 	unsigned char tmp;
 	unsigned long new_msr = regs->msr;
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
-	unsigned long new_dbcr0 = current->thread.dbcr0;
+	unsigned long new_dbcr0 = current->thread.debug.dbcr0;
 #endif
 
 	for (i=0; i<ndbg; i++) {
@@ -1327,7 +1327,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx,
 			} else {
 				new_dbcr0 &= ~DBCR0_IC;
 				if (!DBCR_ACTIVE_EVENTS(new_dbcr0,
-						current->thread.dbcr1)) {
+						current->thread.debug.dbcr1)) {
 					new_msr &= ~MSR_DE;
 					new_dbcr0 &= ~DBCR0_IDM;
 				}
@@ -1362,7 +1362,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx,
 	   the user is really doing something wrong. */
 	regs->msr = new_msr;
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
-	current->thread.dbcr0 = new_dbcr0;
+	current->thread.debug.dbcr0 = new_dbcr0;
 #endif
 
 	if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx))
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 36a1f95a2a36..f686686ca0aa 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -351,8 +351,8 @@ static inline int check_io_access(struct pt_regs *regs)
 #define REASON_TRAP		ESR_PTR
 
 /* single-step stuff */
-#define single_stepping(regs)	(current->thread.dbcr0 & DBCR0_IC)
-#define clear_single_step(regs)	(current->thread.dbcr0 &= ~DBCR0_IC)
+#define single_stepping(regs)	(current->thread.debug.dbcr0 & DBCR0_IC)
+#define clear_single_step(regs)	(current->thread.debug.dbcr0 &= ~DBCR0_IC)
 
 #else
 /* On non-4xx, the reason for the machine check or program
@@ -1489,7 +1489,7 @@ static void handle_debug(struct pt_regs *regs, unsigned long debug_status)
 	if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) {
 		dbcr_dac(current) &= ~(DBCR_DAC1R | DBCR_DAC1W);
 #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
-		current->thread.dbcr2 &= ~DBCR2_DAC12MODE;
+		current->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE;
 #endif
 		do_send_trap(regs, mfspr(SPRN_DAC1), debug_status, TRAP_HWBKPT,
 			     5);
@@ -1500,24 +1500,24 @@ static void handle_debug(struct pt_regs *regs, unsigned long debug_status)
 			     6);
 		changed |= 0x01;
 	}  else if (debug_status & DBSR_IAC1) {
-		current->thread.dbcr0 &= ~DBCR0_IAC1;
+		current->thread.debug.dbcr0 &= ~DBCR0_IAC1;
 		dbcr_iac_range(current) &= ~DBCR_IAC12MODE;
 		do_send_trap(regs, mfspr(SPRN_IAC1), debug_status, TRAP_HWBKPT,
 			     1);
 		changed |= 0x01;
 	}  else if (debug_status & DBSR_IAC2) {
-		current->thread.dbcr0 &= ~DBCR0_IAC2;
+		current->thread.debug.dbcr0 &= ~DBCR0_IAC2;
 		do_send_trap(regs, mfspr(SPRN_IAC2), debug_status, TRAP_HWBKPT,
 			     2);
 		changed |= 0x01;
 	}  else if (debug_status & DBSR_IAC3) {
-		current->thread.dbcr0 &= ~DBCR0_IAC3;
+		current->thread.debug.dbcr0 &= ~DBCR0_IAC3;
 		dbcr_iac_range(current) &= ~DBCR_IAC34MODE;
 		do_send_trap(regs, mfspr(SPRN_IAC3), debug_status, TRAP_HWBKPT,
 			     3);
 		changed |= 0x01;
 	}  else if (debug_status & DBSR_IAC4) {
-		current->thread.dbcr0 &= ~DBCR0_IAC4;
+		current->thread.debug.dbcr0 &= ~DBCR0_IAC4;
 		do_send_trap(regs, mfspr(SPRN_IAC4), debug_status, TRAP_HWBKPT,
 			     4);
 		changed |= 0x01;
@@ -1527,19 +1527,20 @@ static void handle_debug(struct pt_regs *regs, unsigned long debug_status)
 	 * Check all other debug flags and see if that bit needs to be turned
 	 * back on or not.
 	 */
-	if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0, current->thread.dbcr1))
+	if (DBCR_ACTIVE_EVENTS(current->thread.debug.dbcr0,
+	    current->thread.debug.dbcr1))
 		regs->msr |= MSR_DE;
 	else
 		/* Make sure the IDM flag is off */
-		current->thread.dbcr0 &= ~DBCR0_IDM;
+		current->thread.debug.dbcr0 &= ~DBCR0_IDM;
 
 	if (changed & 0x01)
-		mtspr(SPRN_DBCR0, current->thread.dbcr0);
+		mtspr(SPRN_DBCR0, current->thread.debug.dbcr0);
 }
 
 void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 {
-	current->thread.dbsr = debug_status;
+	current->thread.debug.dbsr = debug_status;
 
 	/* Hack alert: On BookE, Branch Taken stops on the branch itself, while
 	 * on server, it stops on the target of the branch. In order to simulate
@@ -1556,8 +1557,8 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 
 		/* Do the single step trick only when coming from userspace */
 		if (user_mode(regs)) {
-			current->thread.dbcr0 &= ~DBCR0_BT;
-			current->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
+			current->thread.debug.dbcr0 &= ~DBCR0_BT;
+			current->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC;
 			regs->msr |= MSR_DE;
 			return;
 		}
@@ -1585,13 +1586,13 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 			return;
 
 		if (user_mode(regs)) {
-			current->thread.dbcr0 &= ~DBCR0_IC;
-			if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0,
-					       current->thread.dbcr1))
+			current->thread.debug.dbcr0 &= ~DBCR0_IC;
+			if (DBCR_ACTIVE_EVENTS(current->thread.debug.dbcr0,
+					       current->thread.debug.dbcr1))
 				regs->msr |= MSR_DE;
 			else
 				/* Make sure the IDM bit is off */
-				current->thread.dbcr0 &= ~DBCR0_IDM;
+				current->thread.debug.dbcr0 &= ~DBCR0_IDM;
 		}
 
 		_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
-- 
cgit v1.2.3


From 3743c9b8ceb638b6e4b78b42f2262e22aa6359f0 Mon Sep 17 00:00:00 2001
From: Bharat Bhushan
Date: Thu, 4 Jul 2013 12:27:44 +0530
Subject: powerpc: export debug registers save function for KVM

KVM need this function when switching from vcpu to user-space
thread. My subsequent patch will use this function.

Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/include/asm/switch_to.h | 1 +
 arch/powerpc/kernel/process.c        | 3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/switch_to.h b/arch/powerpc/include/asm/switch_to.h
index 2be5618cdec6..9ee12610af02 100644
--- a/arch/powerpc/include/asm/switch_to.h
+++ b/arch/powerpc/include/asm/switch_to.h
@@ -35,6 +35,7 @@ extern void giveup_vsx(struct task_struct *);
 extern void enable_kernel_spe(void);
 extern void giveup_spe(struct task_struct *);
 extern void load_up_spe(struct task_struct *);
+extern void switch_booke_debug_regs(struct thread_struct *new_thread);
 
 #ifndef CONFIG_SMP
 extern void discard_lazy_cpu_state(void);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 3db9d7e39f39..4d42c4de8b9b 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -371,12 +371,13 @@ static void prime_debug_regs(struct thread_struct *thread)
  * debug registers, set the debug registers from the values
  * stored in the new thread.
  */
-static void switch_booke_debug_regs(struct thread_struct *new_thread)
+void switch_booke_debug_regs(struct thread_struct *new_thread)
 {
 	if ((current->thread.debug.dbcr0 & DBCR0_IDM)
 		|| (new_thread->debug.dbcr0 & DBCR0_IDM))
 			prime_debug_regs(new_thread);
 }
+EXPORT_SYMBOL_GPL(switch_booke_debug_regs);
 #else	/* !CONFIG_PPC_ADV_DEBUG_REGS */
 #ifndef CONFIG_HAVE_HW_BREAKPOINT
 static void set_debug_reg_defaults(struct thread_struct *thread)
-- 
cgit v1.2.3


From 682775b8de995d97956447730c04d2ff978d4e13 Mon Sep 17 00:00:00 2001
From: James Yang
Date: Fri, 5 Jul 2013 14:49:43 -0500
Subject: powerpc/booke: clear DBCR0_BT in user_disable_single_step()

BookE version of user_disable_single_step() clears DBCR0_IC for the
instruction completion debug, but did not also clear DBCR0_BT for the
branch taken exception.  This behavior was lost by the 2/2010 patch.

Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/ptrace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index aedfd41d354c..01be88b7321e 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -895,7 +895,7 @@ void user_disable_single_step(struct task_struct *task)
 		 * And, after doing so, if all debug flags are off, turn
 		 * off DBCR0(IDM) and MSR(DE) .... Torez
 		 */
-		task->thread.debug.dbcr0 &= ~DBCR0_IC;
+		task->thread.debug.dbcr0 &= ~(DBCR0_IC|DBCR0_BT);
 		/*
 		 * Test to see if any of the DBCR_ACTIVE_EVENTS bits are set.
 		 */
-- 
cgit v1.2.3


From 32dadef2190efd2e06331825b11881daf100d6d9 Mon Sep 17 00:00:00 2001
From: Charles Keepax
Date: Tue, 15 Oct 2013 20:14:22 +0100
Subject: mfd: arizona: Specify supply mappings for Arizona CODECs

The CODEC power supplies should be looked up on the Arizona device as
they will be created here by device tree also update the only user of
non-device tree bindings.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
---
 arch/arm/mach-s3c64xx/mach-crag6410.c | 12 ------------
 drivers/mfd/arizona-core.c            | 32 +++++++++++++++++++++++++++++---
 2 files changed, 29 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index eb8e5a1aca42..f27ca3b89f4c 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -310,10 +310,6 @@ static struct regulator_consumer_supply wallvdd_consumers[] = {
 
 	REGULATOR_SUPPLY("SPKVDDL", "spi0.1"),
 	REGULATOR_SUPPLY("SPKVDDR", "spi0.1"),
-	REGULATOR_SUPPLY("SPKVDDL", "wm5102-codec"),
-	REGULATOR_SUPPLY("SPKVDDR", "wm5102-codec"),
-	REGULATOR_SUPPLY("SPKVDDL", "wm5110-codec"),
-	REGULATOR_SUPPLY("SPKVDDR", "wm5110-codec"),
 
 	REGULATOR_SUPPLY("DC1VDD", "0-0034"),
 	REGULATOR_SUPPLY("DC2VDD", "0-0034"),
@@ -653,14 +649,6 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] = {
 	REGULATOR_SUPPLY("DBVDD3", "spi0.1"),
 	REGULATOR_SUPPLY("LDOVDD", "spi0.1"),
 	REGULATOR_SUPPLY("CPVDD", "spi0.1"),
-
-	REGULATOR_SUPPLY("DBVDD2", "wm5102-codec"),
-	REGULATOR_SUPPLY("DBVDD3", "wm5102-codec"),
-	REGULATOR_SUPPLY("CPVDD", "wm5102-codec"),
-
-	REGULATOR_SUPPLY("DBVDD2", "wm5110-codec"),
-	REGULATOR_SUPPLY("DBVDD3", "wm5110-codec"),
-	REGULATOR_SUPPLY("CPVDD", "wm5110-codec"),
 };
 
 static struct regulator_init_data pvdd_1v8 = {
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 5ac3aa48473b..022b1863d36c 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -569,13 +569,25 @@ static struct mfd_cell early_devs[] = {
 	{ .name = "arizona-ldo1" },
 };
 
+static const char *wm5102_supplies[] = {
+	"DBVDD2",
+	"DBVDD3",
+	"CPVDD",
+	"SPKVDDL",
+	"SPKVDDR",
+};
+
 static struct mfd_cell wm5102_devs[] = {
 	{ .name = "arizona-micsupp" },
 	{ .name = "arizona-extcon" },
 	{ .name = "arizona-gpio" },
 	{ .name = "arizona-haptics" },
 	{ .name = "arizona-pwm" },
-	{ .name = "wm5102-codec" },
+	{
+		.name = "wm5102-codec",
+		.parent_supplies = wm5102_supplies,
+		.num_parent_supplies = ARRAY_SIZE(wm5102_supplies),
+	},
 };
 
 static struct mfd_cell wm5110_devs[] = {
@@ -584,7 +596,17 @@ static struct mfd_cell wm5110_devs[] = {
 	{ .name = "arizona-gpio" },
 	{ .name = "arizona-haptics" },
 	{ .name = "arizona-pwm" },
-	{ .name = "wm5110-codec" },
+	{
+		.name = "wm5110-codec",
+		.parent_supplies = wm5102_supplies,
+		.num_parent_supplies = ARRAY_SIZE(wm5102_supplies),
+	},
+};
+
+static const char *wm8997_supplies[] = {
+	"DBVDD2",
+	"CPVDD",
+	"SPKVDD",
 };
 
 static struct mfd_cell wm8997_devs[] = {
@@ -593,7 +615,11 @@ static struct mfd_cell wm8997_devs[] = {
 	{ .name = "arizona-gpio" },
 	{ .name = "arizona-haptics" },
 	{ .name = "arizona-pwm" },
-	{ .name = "wm8997-codec" },
+	{
+		.name = "wm8997-codec",
+		.parent_supplies = wm8997_supplies,
+		.num_parent_supplies = ARRAY_SIZE(wm8997_supplies),
+	},
 };
 
 int arizona_dev_init(struct arizona *arizona)
-- 
cgit v1.2.3


From 955c1cab809edfb5429603c68493363074ac20cf Mon Sep 17 00:00:00 2001
From: Paul Mackerras
Date: Wed, 23 Oct 2013 09:40:02 +0100
Subject: powerpc: Don't corrupt user registers on 32-bit

Commit de79f7b9f6 ("powerpc: Put FP/VSX and VR state into structures")
modified load_up_fpu() and load_up_altivec() in such a way that they
now use r7 and r8.  Unfortunately, the callers of these functions on
32-bit machines then return to userspace via fast_exception_return,
which doesn't restore all of the volatile GPRs, but only r1, r3 -- r6
and r9 -- r12.  This was causing userspace segfaults and other
userspace misbehaviour on 32-bit machines.

This fixes the problem by changing the register usage of load_up_fpu()
and load_up_altivec() to avoid using r7 and r8 and instead use r6 and
r10.  This also adds comments to those functions saying which registers
may be used.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Tested-by: Scott Wood <scottwood@freescale.com> (on e500mc, so no altivec)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/fpu.S    | 14 ++++++++------
 arch/powerpc/kernel/vector.S | 15 +++++++++------
 2 files changed, 17 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index 4dca05e91e95..f7f5b8bed68f 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -106,6 +106,8 @@ _GLOBAL(store_fp_state)
  * and save its floating-point registers in its thread_struct.
  * Load up this task's FP registers from its thread_struct,
  * enable the FPU for the current task and return to the task.
+ * Note that on 32-bit this can only use registers that will be
+ * restored by fast_exception_return, i.e. r3 - r6, r10 and r11.
  */
 _GLOBAL(load_up_fpu)
 	mfmsr	r5
@@ -131,10 +133,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	beq	1f
 	toreal(r4)
 	addi	r4,r4,THREAD		/* want last_task_used_math->thread */
-	addi	r8,r4,THREAD_FPSTATE
-	SAVE_32FPVSRS(0, R5, R8)
+	addi	r10,r4,THREAD_FPSTATE
+	SAVE_32FPVSRS(0, R5, R10)
 	mffs	fr0
-	stfd	fr0,FPSTATE_FPSCR(r8)
+	stfd	fr0,FPSTATE_FPSCR(r10)
 	PPC_LL	r5,PT_REGS(r4)
 	toreal(r5)
 	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
@@ -157,10 +159,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	or	r12,r12,r4
 	std	r12,_MSR(r1)
 #endif
-	addi	r7,r5,THREAD_FPSTATE
-	lfd	fr0,FPSTATE_FPSCR(r7)
+	addi	r10,r5,THREAD_FPSTATE
+	lfd	fr0,FPSTATE_FPSCR(r10)
 	MTFSF_L(fr0)
-	REST_32FPVSRS(0, R4, R7)
+	REST_32FPVSRS(0, R4, R10)
 #ifndef CONFIG_SMP
 	subi	r4,r5,THREAD
 	fromreal(r4)
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index eacda4eea2d7..0458a9aaba9d 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -64,6 +64,9 @@ _GLOBAL(store_vr_state)
  * Enables the VMX for use in the kernel on return.
  * On SMP we know the VMX is free, since we give it up every
  * switch (ie, no lazy save of the vector registers).
+ *
+ * Note that on 32-bit this can only use registers that will be
+ * restored by fast_exception_return, i.e. r3 - r6, r10 and r11.
  */
 _GLOBAL(load_up_altivec)
 	mfmsr	r5			/* grab the current MSR */
@@ -89,11 +92,11 @@ _GLOBAL(load_up_altivec)
 	/* Save VMX state to last_task_used_altivec's THREAD struct */
 	toreal(r4)
 	addi	r4,r4,THREAD
-	addi	r7,r4,THREAD_VRSTATE
-	SAVE_32VRS(0,r5,r7)
+	addi	r6,r4,THREAD_VRSTATE
+	SAVE_32VRS(0,r5,r6)
 	mfvscr	vr0
 	li	r10,VRSTATE_VSCR
-	stvx	vr0,r10,r7
+	stvx	vr0,r10,r6
 	/* Disable VMX for last_task_used_altivec */
 	PPC_LL	r5,PT_REGS(r4)
 	toreal(r5)
@@ -125,13 +128,13 @@ _GLOBAL(load_up_altivec)
 	oris	r12,r12,MSR_VEC@h
 	std	r12,_MSR(r1)
 #endif
-	addi	r7,r5,THREAD_VRSTATE
+	addi	r6,r5,THREAD_VRSTATE
 	li	r4,1
 	li	r10,VRSTATE_VSCR
 	stw	r4,THREAD_USED_VR(r5)
-	lvx	vr0,r10,r7
+	lvx	vr0,r10,r6
 	mtvscr	vr0
-	REST_32VRS(0,r4,r7)
+	REST_32VRS(0,r4,r6)
 #ifndef CONFIG_SMP
 	/* Update last_task_used_altivec to 'current' */
 	subi	r4,r5,THREAD		/* Back to 'current' */
-- 
cgit v1.2.3


From 4b3db708b114fc35ff1e0cd28a2bfb1490dbb5d3 Mon Sep 17 00:00:00 2001
From: Chen, Gong
Date: Mon, 21 Oct 2013 14:29:25 -0700
Subject: ACPI, x86: Extended error log driver for x86 platform

This H/W error log driver (a.k.a eMCA driver) is implemented based on
http://www.intel.com/content/www/us/en/architecture-and-technology/enhanced-mca-logging-xeon-paper.html

After errors are captured, more detailed platform specific information
can be got via this new enhanced H/W error log driver. Most notably we
can track memory errors back to the DIMM slot silk screen label.

Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/x86/include/asm/mce.h |   1 +
 drivers/acpi/Kconfig       |  19 +++
 drivers/acpi/Makefile      |   2 +
 drivers/acpi/acpi_extlog.c | 327 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/acpi/bus.c         |   3 +-
 include/linux/acpi.h       |   1 +
 6 files changed, 352 insertions(+), 1 deletion(-)
 create mode 100644 drivers/acpi/acpi_extlog.c

(limited to 'arch')

diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index cbe6b9e404ce..c696a8687567 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -16,6 +16,7 @@
 #define MCG_EXT_CNT_SHIFT	16
 #define MCG_EXT_CNT(c)		(((c) & MCG_EXT_CNT_MASK) >> MCG_EXT_CNT_SHIFT)
 #define MCG_SER_P		(1ULL<<24)   /* MCA recovery/new status bits */
+#define MCG_ELOG_P		(1ULL<<26)   /* Extended error log supported */
 
 /* MCG_STATUS register defines */
 #define MCG_STATUS_RIPV  (1ULL<<0)   /* restart ip valid */
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 6efe2ac6902f..252f0e818a49 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -372,4 +372,23 @@ config ACPI_BGRT
 
 source "drivers/acpi/apei/Kconfig"
 
+config ACPI_EXTLOG
+	tristate "Extended Error Log support"
+	depends on X86_MCE && ACPI_APEI
+	default n
+	help
+	  Certain usages such as Predictive Failure Analysis (PFA) require
+	  more information about the error than what can be described in
+	  processor machine check banks. Most server processors log
+	  additional information about the error in processor uncore
+	  registers. Since the addresses and layout of these registers vary
+	  widely from one processor to another, system software cannot
+	  readily make use of them. To complicate matters further, some of
+	  the additional error information cannot be constructed without
+	  detailed knowledge about platform topology.
+
+	  Enhanced MCA Logging allows firmware to provide additional error
+	  information to system software, synchronous with MCE or CMCI. This
+	  driver adds support for that functionality.
+
 endif	# ACPI
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index cdaf68b58b00..bce34afadcd0 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -82,3 +82,5 @@ processor-$(CONFIG_CPU_FREQ)	+= processor_perflib.o
 obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o
 
 obj-$(CONFIG_ACPI_APEI)		+= apei/
+
+obj-$(CONFIG_ACPI_EXTLOG)	+= acpi_extlog.o
diff --git a/drivers/acpi/acpi_extlog.c b/drivers/acpi/acpi_extlog.c
new file mode 100644
index 000000000000..a6869e110ce5
--- /dev/null
+++ b/drivers/acpi/acpi_extlog.c
@@ -0,0 +1,327 @@
+/*
+ * Extended Error Log driver
+ *
+ * Copyright (C) 2013 Intel Corp.
+ * Author: Chen, Gong <gong.chen@intel.com>
+ *
+ * This file is licensed under GPLv2.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <linux/cper.h>
+#include <linux/ratelimit.h>
+#include <asm/cpu.h>
+#include <asm/mce.h>
+
+#include "apei/apei-internal.h"
+
+#define EXT_ELOG_ENTRY_MASK	GENMASK_ULL(51, 0) /* elog entry address mask */
+
+#define EXTLOG_DSM_REV		0x0
+#define	EXTLOG_FN_QUERY		0x0
+#define	EXTLOG_FN_ADDR		0x1
+
+#define FLAG_OS_OPTIN		BIT(0)
+#define EXTLOG_QUERY_L1_EXIST	BIT(1)
+#define ELOG_ENTRY_VALID	(1ULL<<63)
+#define ELOG_ENTRY_LEN		0x1000
+
+#define EMCA_BUG \
+	"Can not request iomem region <0x%016llx-0x%016llx> - eMCA disabled\n"
+
+struct extlog_l1_head {
+	u32 ver;	/* Header Version */
+	u32 hdr_len;	/* Header Length */
+	u64 total_len;	/* entire L1 Directory length including this header */
+	u64 elog_base;	/* MCA Error Log Directory base address */
+	u64 elog_len;	/* MCA Error Log Directory length */
+	u32 flags;	/* bit 0 - OS/VMM Opt-in */
+	u8  rev0[12];
+	u32 entries;	/* Valid L1 Directory entries per logical processor */
+	u8  rev1[12];
+};
+
+static u8 extlog_dsm_uuid[] = "663E35AF-CC10-41A4-88EA-5470AF055295";
+
+/* L1 table related physical address */
+static u64 elog_base;
+static size_t elog_size;
+static u64 l1_dirbase;
+static size_t l1_size;
+
+/* L1 table related virtual address */
+static void __iomem *extlog_l1_addr;
+static void __iomem *elog_addr;
+
+static void *elog_buf;
+
+static u64 *l1_entry_base;
+static u32 l1_percpu_entry;
+
+#define ELOG_IDX(cpu, bank) \
+	(cpu_physical_id(cpu) * l1_percpu_entry + (bank))
+
+#define ELOG_ENTRY_DATA(idx) \
+	(*(l1_entry_base + (idx)))
+
+#define ELOG_ENTRY_ADDR(phyaddr) \
+	(phyaddr - elog_base + (u8 *)elog_addr)
+
+static struct acpi_generic_status *extlog_elog_entry_check(int cpu, int bank)
+{
+	int idx;
+	u64 data;
+	struct acpi_generic_status *estatus;
+
+	WARN_ON(cpu < 0);
+	idx = ELOG_IDX(cpu, bank);
+	data = ELOG_ENTRY_DATA(idx);
+	if ((data & ELOG_ENTRY_VALID) == 0)
+		return NULL;
+
+	data &= EXT_ELOG_ENTRY_MASK;
+	estatus = (struct acpi_generic_status *)ELOG_ENTRY_ADDR(data);
+
+	/* if no valid data in elog entry, just return */
+	if (estatus->block_status == 0)
+		return NULL;
+
+	return estatus;
+}
+
+static void __print_extlog_rcd(const char *pfx,
+			       struct acpi_generic_status *estatus, int cpu)
+{
+	static atomic_t seqno;
+	unsigned int curr_seqno;
+	char pfx_seq[64];
+
+	if (!pfx) {
+		if (estatus->error_severity <= CPER_SEV_CORRECTED)
+			pfx = KERN_INFO;
+		else
+			pfx = KERN_ERR;
+	}
+	curr_seqno = atomic_inc_return(&seqno);
+	snprintf(pfx_seq, sizeof(pfx_seq), "%s{%u}", pfx, curr_seqno);
+	printk("%s""Hardware error detected on CPU%d\n", pfx_seq, cpu);
+	cper_estatus_print(pfx_seq, estatus);
+}
+
+static int print_extlog_rcd(const char *pfx,
+			    struct acpi_generic_status *estatus, int cpu)
+{
+	/* Not more than 2 messages every 5 seconds */
+	static DEFINE_RATELIMIT_STATE(ratelimit_corrected, 5*HZ, 2);
+	static DEFINE_RATELIMIT_STATE(ratelimit_uncorrected, 5*HZ, 2);
+	struct ratelimit_state *ratelimit;
+
+	if (estatus->error_severity == CPER_SEV_CORRECTED ||
+	    (estatus->error_severity == CPER_SEV_INFORMATIONAL))
+		ratelimit = &ratelimit_corrected;
+	else
+		ratelimit = &ratelimit_uncorrected;
+	if (__ratelimit(ratelimit)) {
+		__print_extlog_rcd(pfx, estatus, cpu);
+		return 0;
+	}
+
+	return 1;
+}
+
+static int extlog_print(struct notifier_block *nb, unsigned long val,
+			void *data)
+{
+	struct mce *mce = (struct mce *)data;
+	int	bank = mce->bank;
+	int	cpu = mce->extcpu;
+	struct acpi_generic_status *estatus;
+	int rc;
+
+	estatus = extlog_elog_entry_check(cpu, bank);
+	if (estatus == NULL)
+		return NOTIFY_DONE;
+
+	memcpy(elog_buf, (void *)estatus, ELOG_ENTRY_LEN);
+	/* clear record status to enable BIOS to update it again */
+	estatus->block_status = 0;
+
+	rc = print_extlog_rcd(NULL, (struct acpi_generic_status *)elog_buf, cpu);
+
+	return NOTIFY_DONE;
+}
+
+static int extlog_get_dsm(acpi_handle handle, int rev, int func, u64 *ret)
+{
+	struct acpi_buffer buf = {ACPI_ALLOCATE_BUFFER, NULL};
+	struct acpi_object_list input;
+	union acpi_object params[4], *obj;
+	u8 uuid[16];
+	int i;
+
+	acpi_str_to_uuid(extlog_dsm_uuid, uuid);
+	input.count = 4;
+	input.pointer = params;
+	params[0].type = ACPI_TYPE_BUFFER;
+	params[0].buffer.length = 16;
+	params[0].buffer.pointer = uuid;
+	params[1].type = ACPI_TYPE_INTEGER;
+	params[1].integer.value = rev;
+	params[2].type = ACPI_TYPE_INTEGER;
+	params[2].integer.value = func;
+	params[3].type = ACPI_TYPE_PACKAGE;
+	params[3].package.count = 0;
+	params[3].package.elements = NULL;
+
+	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_DSM", &input, &buf)))
+		return -1;
+
+	*ret = 0;
+	obj = (union acpi_object *)buf.pointer;
+	if (obj->type == ACPI_TYPE_INTEGER) {
+		*ret = obj->integer.value;
+	} else if (obj->type == ACPI_TYPE_BUFFER) {
+		if (obj->buffer.length <= 8) {
+			for (i = 0; i < obj->buffer.length; i++)
+				*ret |= (obj->buffer.pointer[i] << (i * 8));
+		}
+	}
+	kfree(buf.pointer);
+
+	return 0;
+}
+
+static bool extlog_get_l1addr(void)
+{
+	acpi_handle handle;
+	u64 ret;
+
+	if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle)))
+		return false;
+
+	if (extlog_get_dsm(handle, EXTLOG_DSM_REV, EXTLOG_FN_QUERY, &ret) ||
+	    !(ret & EXTLOG_QUERY_L1_EXIST))
+		return false;
+
+	if (extlog_get_dsm(handle, EXTLOG_DSM_REV, EXTLOG_FN_ADDR, &ret))
+		return false;
+
+	l1_dirbase = ret;
+	/* Spec says L1 directory must be 4K aligned, bail out if it isn't */
+	if (l1_dirbase & ((1 << 12) - 1)) {
+		pr_warn(FW_BUG "L1 Directory is invalid at physical %llx\n",
+			l1_dirbase);
+		return false;
+	}
+
+	return true;
+}
+static struct notifier_block extlog_mce_dec = {
+	.notifier_call	= extlog_print,
+};
+
+static int __init extlog_init(void)
+{
+	struct extlog_l1_head *l1_head;
+	void __iomem *extlog_l1_hdr;
+	size_t l1_hdr_size;
+	struct resource *r;
+	u64 cap;
+	int rc;
+
+	rc = -ENODEV;
+
+	rdmsrl(MSR_IA32_MCG_CAP, cap);
+	if (!(cap & MCG_ELOG_P))
+		return rc;
+
+	if (!extlog_get_l1addr())
+		return rc;
+
+	rc = -EINVAL;
+	/* get L1 header to fetch necessary information */
+	l1_hdr_size = sizeof(struct extlog_l1_head);
+	r = request_mem_region(l1_dirbase, l1_hdr_size, "L1 DIR HDR");
+	if (!r) {
+		pr_warn(FW_BUG EMCA_BUG,
+			(unsigned long long)l1_dirbase,
+			(unsigned long long)l1_dirbase + l1_hdr_size);
+		goto err;
+	}
+
+	extlog_l1_hdr = acpi_os_map_memory(l1_dirbase, l1_hdr_size);
+	l1_head = (struct extlog_l1_head *)extlog_l1_hdr;
+	l1_size = l1_head->total_len;
+	l1_percpu_entry = l1_head->entries;
+	elog_base = l1_head->elog_base;
+	elog_size = l1_head->elog_len;
+	acpi_os_unmap_memory(extlog_l1_hdr, l1_hdr_size);
+	release_mem_region(l1_dirbase, l1_hdr_size);
+
+	/* remap L1 header again based on completed information */
+	r = request_mem_region(l1_dirbase, l1_size, "L1 Table");
+	if (!r) {
+		pr_warn(FW_BUG EMCA_BUG,
+			(unsigned long long)l1_dirbase,
+			(unsigned long long)l1_dirbase + l1_size);
+		goto err;
+	}
+	extlog_l1_addr = acpi_os_map_memory(l1_dirbase, l1_size);
+	l1_entry_base = (u64 *)((u8 *)extlog_l1_addr + l1_hdr_size);
+
+	/* remap elog table */
+	r = request_mem_region(elog_base, elog_size, "Elog Table");
+	if (!r) {
+		pr_warn(FW_BUG EMCA_BUG,
+			(unsigned long long)elog_base,
+			(unsigned long long)elog_base + elog_size);
+		goto err_release_l1_dir;
+	}
+	elog_addr = acpi_os_map_memory(elog_base, elog_size);
+
+	rc = -ENOMEM;
+	/* allocate buffer to save elog record */
+	elog_buf = kmalloc(ELOG_ENTRY_LEN, GFP_KERNEL);
+	if (elog_buf == NULL)
+		goto err_release_elog;
+
+	mce_register_decode_chain(&extlog_mce_dec);
+	/* enable OS to be involved to take over management from BIOS */
+	((struct extlog_l1_head *)extlog_l1_addr)->flags |= FLAG_OS_OPTIN;
+
+	return 0;
+
+err_release_elog:
+	if (elog_addr)
+		acpi_os_unmap_memory(elog_addr, elog_size);
+	release_mem_region(elog_base, elog_size);
+err_release_l1_dir:
+	if (extlog_l1_addr)
+		acpi_os_unmap_memory(extlog_l1_addr, l1_size);
+	release_mem_region(l1_dirbase, l1_size);
+err:
+	pr_warn(FW_BUG "Extended error log disabled because of problems parsing f/w tables\n");
+	return rc;
+}
+
+static void __exit extlog_exit(void)
+{
+	mce_unregister_decode_chain(&extlog_mce_dec);
+	((struct extlog_l1_head *)extlog_l1_addr)->flags &= ~FLAG_OS_OPTIN;
+	if (extlog_l1_addr)
+		acpi_os_unmap_memory(extlog_l1_addr, l1_size);
+	if (elog_addr)
+		acpi_os_unmap_memory(elog_addr, elog_size);
+	release_mem_region(elog_base, elog_size);
+	release_mem_region(l1_dirbase, l1_size);
+	kfree(elog_buf);
+}
+
+module_init(extlog_init);
+module_exit(extlog_exit);
+
+MODULE_AUTHOR("Chen, Gong <gong.chen@intel.com>");
+MODULE_DESCRIPTION("Extended MCA Error Log Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index b587ec8257b2..e1bd9a181117 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -174,7 +174,7 @@ static void acpi_print_osc_error(acpi_handle handle,
 	printk("\n");
 }
 
-static acpi_status acpi_str_to_uuid(char *str, u8 *uuid)
+acpi_status acpi_str_to_uuid(char *str, u8 *uuid)
 {
 	int i;
 	static int opc_map_to_uuid[16] = {6, 4, 2, 0, 11, 9, 16, 14, 19, 21,
@@ -195,6 +195,7 @@ static acpi_status acpi_str_to_uuid(char *str, u8 *uuid)
 	}
 	return AE_OK;
 }
+EXPORT_SYMBOL_GPL(acpi_str_to_uuid);
 
 acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context)
 {
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index a5db4aeefa36..c30bac8503bc 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -311,6 +311,7 @@ struct acpi_osc_context {
 #define OSC_INVALID_REVISION_ERROR	8
 #define OSC_CAPABILITIES_MASK_ERROR	16
 
+acpi_status acpi_str_to_uuid(char *str, u8 *uuid);
 acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context);
 
 /* platform-wide _OSC bits */
-- 
cgit v1.2.3


From dd6dad4288cb93e79bd7abfa6c6a338c47454d1a Mon Sep 17 00:00:00 2001
From: Chen, Gong
Date: Fri, 18 Oct 2013 14:29:25 -0700
Subject: DMI: Parse memory device (type 17) in SMBIOS

This patch adds a new interface to decode memory device (type 17)
to help error reporting on DIMMs.

Original-author: Tony Luck <tony.luck@intel.com>
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/setup.c    |  1 +
 arch/x86/kernel/setup.c     |  1 +
 drivers/firmware/dmi_scan.c | 60 +++++++++++++++++++++++++++++++++++++++++++++
 include/linux/dmi.h         |  5 ++++
 4 files changed, 67 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 4fc2e9569bb2..d86669bcdfb2 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -1063,6 +1063,7 @@ check_bugs (void)
 static int __init run_dmi_scan(void)
 {
 	dmi_scan_machine();
+	dmi_memdev_walk();
 	dmi_set_dump_stack_arch_desc();
 	return 0;
 }
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index f0de6294b955..918d489fa53d 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -993,6 +993,7 @@ void __init setup_arch(char **cmdline_p)
 		efi_init();
 
 	dmi_scan_machine();
+	dmi_memdev_walk();
 	dmi_set_dump_stack_arch_desc();
 
 	/*
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index fa0affb699b4..59579a744d58 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -25,6 +25,13 @@ static int dmi_initialized;
 /* DMI system identification string used during boot */
 static char dmi_ids_string[128] __initdata;
 
+static struct dmi_memdev_info {
+	const char *device;
+	const char *bank;
+	u16 handle;
+} *dmi_memdev;
+static int dmi_memdev_nr;
+
 static const char * __init dmi_string_nosave(const struct dmi_header *dm, u8 s)
 {
 	const u8 *bp = ((u8 *) dm) + dm->length;
@@ -322,6 +329,42 @@ static void __init dmi_save_extended_devices(const struct dmi_header *dm)
 	dmi_save_one_device(*d & 0x7f, dmi_string_nosave(dm, *(d - 1)));
 }
 
+static void __init count_mem_devices(const struct dmi_header *dm, void *v)
+{
+	if (dm->type != DMI_ENTRY_MEM_DEVICE)
+		return;
+	dmi_memdev_nr++;
+}
+
+static void __init save_mem_devices(const struct dmi_header *dm, void *v)
+{
+	const char *d = (const char *)dm;
+	static int nr;
+
+	if (dm->type != DMI_ENTRY_MEM_DEVICE)
+		return;
+	if (nr >= dmi_memdev_nr) {
+		pr_warn(FW_BUG "Too many DIMM entries in SMBIOS table\n");
+		return;
+	}
+	dmi_memdev[nr].handle = dm->handle;
+	dmi_memdev[nr].device = dmi_string(dm, d[0x10]);
+	dmi_memdev[nr].bank = dmi_string(dm, d[0x11]);
+	nr++;
+}
+
+void __init dmi_memdev_walk(void)
+{
+	if (!dmi_available)
+		return;
+
+	if (dmi_walk_early(count_mem_devices) == 0 && dmi_memdev_nr) {
+		dmi_memdev = dmi_alloc(sizeof(*dmi_memdev) * dmi_memdev_nr);
+		if (dmi_memdev)
+			dmi_walk_early(save_mem_devices);
+	}
+}
+
 /*
  *	Process a DMI table entry. Right now all we care about are the BIOS
  *	and machine entries. For 2.5 we should pull the smbus controller info
@@ -815,3 +858,20 @@ bool dmi_match(enum dmi_field f, const char *str)
 	return !strcmp(info, str);
 }
 EXPORT_SYMBOL_GPL(dmi_match);
+
+void dmi_memdev_name(u16 handle, const char **bank, const char **device)
+{
+	int n;
+
+	if (dmi_memdev == NULL)
+		return;
+
+	for (n = 0; n < dmi_memdev_nr; n++) {
+		if (handle == dmi_memdev[n].handle) {
+			*bank = dmi_memdev[n].bank;
+			*device = dmi_memdev[n].device;
+			break;
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(dmi_memdev_name);
diff --git a/include/linux/dmi.h b/include/linux/dmi.h
index b6eb7a05d58e..f820f0a336c9 100644
--- a/include/linux/dmi.h
+++ b/include/linux/dmi.h
@@ -99,6 +99,7 @@ extern const char * dmi_get_system_info(int field);
 extern const struct dmi_device * dmi_find_device(int type, const char *name,
 	const struct dmi_device *from);
 extern void dmi_scan_machine(void);
+extern void dmi_memdev_walk(void);
 extern void dmi_set_dump_stack_arch_desc(void);
 extern bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp);
 extern int dmi_name_in_vendors(const char *str);
@@ -107,6 +108,7 @@ extern int dmi_available;
 extern int dmi_walk(void (*decode)(const struct dmi_header *, void *),
 	void *private_data);
 extern bool dmi_match(enum dmi_field f, const char *str);
+extern void dmi_memdev_name(u16 handle, const char **bank, const char **device);
 
 #else
 
@@ -115,6 +117,7 @@ static inline const char * dmi_get_system_info(int field) { return NULL; }
 static inline const struct dmi_device * dmi_find_device(int type, const char *name,
 	const struct dmi_device *from) { return NULL; }
 static inline void dmi_scan_machine(void) { return; }
+static inline void dmi_memdev_walk(void) { }
 static inline void dmi_set_dump_stack_arch_desc(void) { }
 static inline bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp)
 {
@@ -133,6 +136,8 @@ static inline int dmi_walk(void (*decode)(const struct dmi_header *, void *),
 	void *private_data) { return -1; }
 static inline bool dmi_match(enum dmi_field f, const char *str)
 	{ return false; }
+static inline void dmi_memdev_name(u16 handle, const char **bank,
+		const char **device) { }
 static inline const struct dmi_system_id *
 	dmi_first_match(const struct dmi_system_id *list) { return NULL; }
 
-- 
cgit v1.2.3


From 147de14772ed897727dba7353916b02d1e0f17f4 Mon Sep 17 00:00:00 2001
From: Chen, Gong
Date: Fri, 18 Oct 2013 14:30:13 -0700
Subject: ACPI, APEI, CPER: Add UEFI 2.4 support for memory error

In latest UEFI spec(by now it is 2.4) memory error definition
for CPER (UEFI 2.4 Appendix N Common Platform Error Record)
adds some new fields. These fields help people to locate
memory error to an actual DIMM location.

Original-author: Tony Luck <tony.luck@intel.com>
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/x86/kernel/cpu/mcheck/mce-apei.c |  3 +--
 drivers/acpi/apei/cper.c              |  7 ++++---
 drivers/acpi/apei/ghes.c              |  4 ++--
 drivers/edac/ghes_edac.c              |  5 ++---
 include/linux/cper.h                  | 11 +++++++++--
 5 files changed, 18 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce-apei.c b/arch/x86/kernel/cpu/mcheck/mce-apei.c
index cd8b166a1735..de8b60a53f69 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-apei.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-apei.c
@@ -42,8 +42,7 @@ void apei_mce_report_mem_error(int corrected, struct cper_sec_mem_err *mem_err)
 	struct mce m;
 
 	/* Only corrected MC is reported */
-	if (!corrected || !(mem_err->validation_bits &
-				CPER_MEM_VALID_PHYSICAL_ADDRESS))
+	if (!corrected || !(mem_err->validation_bits & CPER_MEM_VALID_PA))
 		return;
 
 	mce_setup(&m);
diff --git a/drivers/acpi/apei/cper.c b/drivers/acpi/apei/cper.c
index eb5f6d6d7dbc..946ef520186f 100644
--- a/drivers/acpi/apei/cper.c
+++ b/drivers/acpi/apei/cper.c
@@ -8,7 +8,7 @@
  * various tables, such as ERST, BERT and HEST etc.
  *
  * For more information about CPER, please refer to Appendix N of UEFI
- * Specification version 2.3.
+ * Specification version 2.4.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License version
@@ -191,16 +191,17 @@ static const char *cper_mem_err_type_strs[] = {
 	"memory sparing",
 	"scrub corrected error",
 	"scrub uncorrected error",
+	"physical memory map-out event",
 };
 
 static void cper_print_mem(const char *pfx, const struct cper_sec_mem_err *mem)
 {
 	if (mem->validation_bits & CPER_MEM_VALID_ERROR_STATUS)
 		printk("%s""error_status: 0x%016llx\n", pfx, mem->error_status);
-	if (mem->validation_bits & CPER_MEM_VALID_PHYSICAL_ADDRESS)
+	if (mem->validation_bits & CPER_MEM_VALID_PA)
 		printk("%s""physical_address: 0x%016llx\n",
 		       pfx, mem->physical_addr);
-	if (mem->validation_bits & CPER_MEM_VALID_PHYSICAL_ADDRESS_MASK)
+	if (mem->validation_bits & CPER_MEM_VALID_PA_MASK)
 		printk("%s""physical_address_mask: 0x%016llx\n",
 		       pfx, mem->physical_addr_mask);
 	if (mem->validation_bits & CPER_MEM_VALID_NODE)
diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index 0db6e4ff6501..a30bc313787b 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -419,7 +419,7 @@ static void ghes_handle_memory_failure(struct acpi_generic_data *gdata, int sev)
 
 	if (sec_sev == GHES_SEV_CORRECTED &&
 	    (gdata->flags & CPER_SEC_ERROR_THRESHOLD_EXCEEDED) &&
-	    (mem_err->validation_bits & CPER_MEM_VALID_PHYSICAL_ADDRESS)) {
+	    (mem_err->validation_bits & CPER_MEM_VALID_PA)) {
 		pfn = mem_err->physical_addr >> PAGE_SHIFT;
 		if (pfn_valid(pfn))
 			memory_failure_queue(pfn, 0, MF_SOFT_OFFLINE);
@@ -430,7 +430,7 @@ static void ghes_handle_memory_failure(struct acpi_generic_data *gdata, int sev)
 	}
 	if (sev == GHES_SEV_RECOVERABLE &&
 	    sec_sev == GHES_SEV_RECOVERABLE &&
-	    mem_err->validation_bits & CPER_MEM_VALID_PHYSICAL_ADDRESS) {
+	    mem_err->validation_bits & CPER_MEM_VALID_PA) {
 		pfn = mem_err->physical_addr >> PAGE_SHIFT;
 		memory_failure_queue(pfn, 0, 0);
 	}
diff --git a/drivers/edac/ghes_edac.c b/drivers/edac/ghes_edac.c
index bb534670ec02..0ad797b9db65 100644
--- a/drivers/edac/ghes_edac.c
+++ b/drivers/edac/ghes_edac.c
@@ -297,15 +297,14 @@ void ghes_edac_report_mem_error(struct ghes *ghes, int sev,
 	}
 
 	/* Error address */
-	if (mem_err->validation_bits & CPER_MEM_VALID_PHYSICAL_ADDRESS) {
+	if (mem_err->validation_bits & CPER_MEM_VALID_PA) {
 		e->page_frame_number = mem_err->physical_addr >> PAGE_SHIFT;
 		e->offset_in_page = mem_err->physical_addr & ~PAGE_MASK;
 	}
 
 	/* Error grain */
-	if (mem_err->validation_bits & CPER_MEM_VALID_PHYSICAL_ADDRESS_MASK) {
+	if (mem_err->validation_bits & CPER_MEM_VALID_PA_MASK)
 		e->grain = ~(mem_err->physical_addr_mask & ~PAGE_MASK);
-	}
 
 	/* Memory error location, mapped on e->location */
 	p = e->location;
diff --git a/include/linux/cper.h b/include/linux/cper.h
index 09ebe2113641..2fc0ec3d89cc 100644
--- a/include/linux/cper.h
+++ b/include/linux/cper.h
@@ -218,8 +218,8 @@ enum {
 #define CPER_PROC_VALID_IP			0x1000
 
 #define CPER_MEM_VALID_ERROR_STATUS		0x0001
-#define CPER_MEM_VALID_PHYSICAL_ADDRESS		0x0002
-#define CPER_MEM_VALID_PHYSICAL_ADDRESS_MASK	0x0004
+#define CPER_MEM_VALID_PA			0x0002
+#define CPER_MEM_VALID_PA_MASK			0x0004
 #define CPER_MEM_VALID_NODE			0x0008
 #define CPER_MEM_VALID_CARD			0x0010
 #define CPER_MEM_VALID_MODULE			0x0020
@@ -232,6 +232,9 @@ enum {
 #define CPER_MEM_VALID_RESPONDER_ID		0x1000
 #define CPER_MEM_VALID_TARGET_ID		0x2000
 #define CPER_MEM_VALID_ERROR_TYPE		0x4000
+#define CPER_MEM_VALID_RANK_NUMBER		0x8000
+#define CPER_MEM_VALID_CARD_HANDLE		0x10000
+#define CPER_MEM_VALID_MODULE_HANDLE		0x20000
 
 #define CPER_PCIE_VALID_PORT_TYPE		0x0001
 #define CPER_PCIE_VALID_VERSION			0x0002
@@ -347,6 +350,10 @@ struct cper_sec_mem_err {
 	__u64	responder_id;
 	__u64	target_id;
 	__u8	error_type;
+	__u8	reserved;
+	__u16	rank;
+	__u16	mem_array_handle;	/* card handle in UEFI 2.4 */
+	__u16	mem_dev_handle;		/* module handle in UEFI 2.4 */
 };
 
 struct cper_sec_pcie {
-- 
cgit v1.2.3


From 0c02c8007ea5554d028f99fd3e29fc201fdeeab3 Mon Sep 17 00:00:00 2001
From: Grant Likely
Date: Thu, 19 Sep 2013 11:22:36 -0500
Subject: of/irq: Rename of_irq_map_* functions to of_irq_parse_*

The OF irq handling code has been overloading the term 'map' to refer to
both parsing the data in the device tree and mapping it to the internal
linux irq system. This is probably because the device tree does have the
concept of an 'interrupt-map' function for translating interrupt
references from one node to another, but 'map' is still confusing when
the primary purpose of some of the functions are to parse the DT data.

This patch renames all the of_irq_map_* functions to of_irq_parse_*
which makes it clear that there is a difference between the parsing
phase and the mapping phase. Kernel code can make use of just the
parsing or just the mapping support as needed by the subsystem.

The patch was generated mechanically with a handful of sed commands.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Michal Simek <monstr@monstr.eu>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/arm/mach-integrator/pci_v3.c              |  4 ++--
 arch/microblaze/pci/pci-common.c               |  2 +-
 arch/mips/pci/fixup-lantiq.c                   |  2 +-
 arch/mips/pci/pci-rt3883.c                     |  2 +-
 arch/powerpc/kernel/pci-common.c               |  2 +-
 arch/powerpc/platforms/cell/celleb_scc_pciex.c |  2 +-
 arch/powerpc/platforms/cell/celleb_scc_sio.c   |  2 +-
 arch/powerpc/platforms/cell/spider-pic.c       |  2 +-
 arch/powerpc/platforms/cell/spu_manage.c       |  2 +-
 arch/powerpc/platforms/fsl_uli1575.c           |  2 +-
 arch/powerpc/platforms/powermac/pic.c          |  2 +-
 arch/powerpc/platforms/pseries/event_sources.c |  2 +-
 arch/powerpc/sysdev/mpic_msi.c                 |  2 +-
 arch/x86/kernel/devicetree.c                   |  2 +-
 drivers/of/address.c                           |  4 ++--
 drivers/of/irq.c                               | 28 +++++++++++++-------------
 drivers/of/of_pci_irq.c                        | 10 ++++-----
 drivers/pci/host/pci-mvebu.c                   |  2 +-
 include/linux/of_irq.h                         |  8 ++++----
 include/linux/of_pci.h                         |  2 +-
 20 files changed, 42 insertions(+), 42 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index bef100527c42..0f496cc51f36 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -840,9 +840,9 @@ static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin)
 	struct of_irq oirq;
 	int ret;
 
-	ret = of_irq_map_pci(dev, &oirq);
+	ret = of_irq_parse_pci(dev, &oirq);
 	if (ret) {
-		dev_err(&dev->dev, "of_irq_map_pci() %d\n", ret);
+		dev_err(&dev->dev, "of_irq_parse_pci() %d\n", ret);
 		/* Proper return code 0 == NO_IRQ */
 		return 0;
 	}
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 1b93bf0892a0..4d5b1a9cd790 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -217,7 +217,7 @@ int pci_read_irq_line(struct pci_dev *pci_dev)
 	memset(&oirq, 0xff, sizeof(oirq));
 #endif
 	/* Try to get a mapping from the device-tree */
-	if (of_irq_map_pci(pci_dev, &oirq)) {
+	if (of_irq_parse_pci(pci_dev, &oirq)) {
 		u8 line, pin;
 
 		/* If that fails, lets fallback to what is in the config
diff --git a/arch/mips/pci/fixup-lantiq.c b/arch/mips/pci/fixup-lantiq.c
index 6c829df28dc7..2e8dbfedae53 100644
--- a/arch/mips/pci/fixup-lantiq.c
+++ b/arch/mips/pci/fixup-lantiq.c
@@ -28,7 +28,7 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	struct of_irq dev_irq;
 	int irq;
 
-	if (of_irq_map_pci(dev, &dev_irq)) {
+	if (of_irq_parse_pci(dev, &dev_irq)) {
 		dev_err(&dev->dev, "trying to map irq for unknown slot:%d pin:%d\n",
 			slot, pin);
 		return 0;
diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
index 95c9d41382e7..cae92a05ee70 100644
--- a/arch/mips/pci/pci-rt3883.c
+++ b/arch/mips/pci/pci-rt3883.c
@@ -587,7 +587,7 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	int err;
 	int irq;
 
-	err = of_irq_map_pci(dev, &dev_irq);
+	err = of_irq_parse_pci(dev, &dev_irq);
 	if (err) {
 		pr_err("pci %s: unable to get irq map, err=%d\n",
 		       pci_name((struct pci_dev *) dev), err);
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 905a24bb7acc..2f4185425ed5 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -237,7 +237,7 @@ static int pci_read_irq_line(struct pci_dev *pci_dev)
 	memset(&oirq, 0xff, sizeof(oirq));
 #endif
 	/* Try to get a mapping from the device-tree */
-	if (of_irq_map_pci(pci_dev, &oirq)) {
+	if (of_irq_parse_pci(pci_dev, &oirq)) {
 		u8 line, pin;
 
 		/* If that fails, lets fallback to what is in the config
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index 14be2bd358b8..40bc371096b7 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -507,7 +507,7 @@ static __init int celleb_setup_pciex(struct device_node *node,
 	phb->ops = &scc_pciex_pci_ops;
 
 	/* internal interrupt handler */
-	if (of_irq_map_one(node, 1, &oirq)) {
+	if (of_irq_parse_one(node, 1, &oirq)) {
 		pr_err("PCIEXC:Failed to map irq\n");
 		goto error;
 	}
diff --git a/arch/powerpc/platforms/cell/celleb_scc_sio.c b/arch/powerpc/platforms/cell/celleb_scc_sio.c
index 9c339ec646f5..96388b202f4e 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_sio.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_sio.c
@@ -53,7 +53,7 @@ static int __init txx9_serial_init(void)
 			if (!(txx9_serial_bitmap & (1<<i)))
 				continue;
 
-			if (of_irq_map_one(node, i, &irq))
+			if (of_irq_parse_one(node, i, &irq))
 				continue;
 			if (of_address_to_resource(node,
 				txx9_scc_tab[i].index, &res))
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index 8e299447127e..b491f406560a 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -236,7 +236,7 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
 	 * tree in case the device-tree is ever fixed
 	 */
 	struct of_irq oirq;
-	if (of_irq_map_one(pic->host->of_node, 0, &oirq) == 0) {
+	if (of_irq_parse_one(pic->host->of_node, 0, &oirq) == 0) {
 		virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
 					     oirq.size);
 		return virq;
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index 2bb6977c0a5a..e6cdb81a0959 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -182,7 +182,7 @@ static int __init spu_map_interrupts(struct spu *spu, struct device_node *np)
 	int i;
 
 	for (i=0; i < 3; i++) {
-		ret = of_irq_map_one(np, i, &oirq);
+		ret = of_irq_parse_one(np, i, &oirq);
 		if (ret) {
 			pr_debug("spu_new: failed to get irq %d\n", i);
 			goto err;
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index 92ac9b52b32d..ac539c1cd808 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -333,7 +333,7 @@ static void hpcd_final_uli5288(struct pci_dev *dev)
 
 	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
 	laddr[1] = laddr[2] = 0;
-	of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
+	of_irq_parse_raw(hosenode, &pin, 1, laddr, &oirq);
 	virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
 				     oirq.size);
 	dev->irq = virq;
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 31036b56670e..720663e29f47 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -393,7 +393,7 @@ static void __init pmac_pic_probe_oldstyle(void)
 #endif
 }
 
-int of_irq_map_oldworld(struct device_node *device, int index,
+int of_irq_parse_oldworld(struct device_node *device, int index,
 			struct of_irq *out_irq)
 {
 	const u32 *ints = NULL;
diff --git a/arch/powerpc/platforms/pseries/event_sources.c b/arch/powerpc/platforms/pseries/event_sources.c
index 2605c310166a..850c18c457ad 100644
--- a/arch/powerpc/platforms/pseries/event_sources.c
+++ b/arch/powerpc/platforms/pseries/event_sources.c
@@ -55,7 +55,7 @@ void request_event_sources_irqs(struct device_node *np,
 	/* Else use normal interrupt tree parsing */
 	else {
 		/* First try to do a proper OF tree parsing */
-		for (index = 0; of_irq_map_one(np, index, &oirq) == 0;
+		for (index = 0; of_irq_parse_one(np, index, &oirq) == 0;
 		     index++) {
 			if (count > 15)
 				break;
diff --git a/arch/powerpc/sysdev/mpic_msi.c b/arch/powerpc/sysdev/mpic_msi.c
index bbf342c88314..463e3a7c193c 100644
--- a/arch/powerpc/sysdev/mpic_msi.c
+++ b/arch/powerpc/sysdev/mpic_msi.c
@@ -63,7 +63,7 @@ static int mpic_msi_reserve_u3_hwirqs(struct mpic *mpic)
 		pr_debug("mpic: mapping hwirqs for %s\n", np->full_name);
 
 		index = 0;
-		while (of_irq_map_one(np, index++, &oirq) == 0) {
+		while (of_irq_parse_one(np, index++, &oirq) == 0) {
 			ops->xlate(mpic->irqhost, NULL, oirq.specifier,
 						oirq.size, &hwirq, &flags);
 			msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, hwirq);
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 376dc7873447..3ac6398e5361 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -116,7 +116,7 @@ static int x86_of_pci_irq_enable(struct pci_dev *dev)
 	if (!pin)
 		return 0;
 
-	ret = of_irq_map_pci(dev, &oirq);
+	ret = of_irq_parse_pci(dev, &oirq);
 	if (ret)
 		return ret;
 
diff --git a/drivers/of/address.c b/drivers/of/address.c
index 71180b91bfbe..994f293baebf 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -532,12 +532,12 @@ static u64 __of_translate_address(struct device_node *dev,
 		pbus->count_cells(dev, &pna, &pns);
 		if (!OF_CHECK_COUNTS(pna, pns)) {
 			printk(KERN_ERR "prom_parse: Bad cell count for %s\n",
-			       dev->full_name);
+			       of_node_full_name(dev));
 			break;
 		}
 
 		pr_debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n",
-		    pbus->name, pna, pns, parent->full_name);
+		    pbus->name, pna, pns, of_node_full_name(parent));
 
 		/* Apply bus translation */
 		if (of_translate_one(dev, bus, pbus, addr, na, ns, pna, rprop))
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 90068f914911..410aa2415f42 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -31,14 +31,14 @@
  * @dev: Device node of the device whose interrupt is to be mapped
  * @index: Index of the interrupt to map
  *
- * This function is a wrapper that chains of_irq_map_one() and
+ * This function is a wrapper that chains of_irq_parse_one() and
  * irq_create_of_mapping() to make things easier to callers
  */
 unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
 {
 	struct of_irq oirq;
 
-	if (of_irq_map_one(dev, index, &oirq))
+	if (of_irq_parse_one(dev, index, &oirq))
 		return 0;
 
 	return irq_create_of_mapping(oirq.controller, oirq.specifier,
@@ -79,7 +79,7 @@ struct device_node *of_irq_find_parent(struct device_node *child)
 }
 
 /**
- * of_irq_map_raw - Low level interrupt tree parsing
+ * of_irq_parse_raw - Low level interrupt tree parsing
  * @parent:	the device interrupt parent
  * @intspec:	interrupt specifier ("interrupts" property of the device)
  * @ointsize:   size of the passed in interrupt specifier
@@ -93,7 +93,7 @@ struct device_node *of_irq_find_parent(struct device_node *child)
  * properties, for example when resolving PCI interrupts when no device
  * node exist for the parent.
  */
-int of_irq_map_raw(struct device_node *parent, const __be32 *intspec,
+int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec,
 		   u32 ointsize, const __be32 *addr, struct of_irq *out_irq)
 {
 	struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
@@ -101,7 +101,7 @@ int of_irq_map_raw(struct device_node *parent, const __be32 *intspec,
 	u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
 	int imaplen, match, i;
 
-	pr_debug("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n",
+	pr_debug("of_irq_parse_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n",
 		 of_node_full_name(parent), be32_to_cpup(intspec),
 		 be32_to_cpup(intspec + 1), ointsize);
 
@@ -126,7 +126,7 @@ int of_irq_map_raw(struct device_node *parent, const __be32 *intspec,
 		goto fail;
 	}
 
-	pr_debug("of_irq_map_raw: ipar=%s, size=%d\n", of_node_full_name(ipar), intsize);
+	pr_debug("of_irq_parse_raw: ipar=%s, size=%d\n", of_node_full_name(ipar), intsize);
 
 	if (ointsize != intsize)
 		return -EINVAL;
@@ -269,29 +269,29 @@ int of_irq_map_raw(struct device_node *parent, const __be32 *intspec,
 
 	return -EINVAL;
 }
-EXPORT_SYMBOL_GPL(of_irq_map_raw);
+EXPORT_SYMBOL_GPL(of_irq_parse_raw);
 
 /**
- * of_irq_map_one - Resolve an interrupt for a device
+ * of_irq_parse_one - Resolve an interrupt for a device
  * @device: the device whose interrupt is to be resolved
  * @index: index of the interrupt to resolve
  * @out_irq: structure of_irq filled by this function
  *
  * This function resolves an interrupt, walking the tree, for a given
- * device-tree node. It's the high level pendant to of_irq_map_raw().
+ * device-tree node. It's the high level pendant to of_irq_parse_raw().
  */
-int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq)
+int of_irq_parse_one(struct device_node *device, int index, struct of_irq *out_irq)
 {
 	struct device_node *p;
 	const __be32 *intspec, *tmp, *addr;
 	u32 intsize, intlen;
 	int res = -EINVAL;
 
-	pr_debug("of_irq_map_one: dev=%s, index=%d\n", of_node_full_name(device), index);
+	pr_debug("of_irq_parse_one: dev=%s, index=%d\n", of_node_full_name(device), index);
 
 	/* OldWorld mac stuff is "special", handle out of line */
 	if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC)
-		return of_irq_map_oldworld(device, index, out_irq);
+		return of_irq_parse_oldworld(device, index, out_irq);
 
 	/* Get the interrupts property */
 	intspec = of_get_property(device, "interrupts", &intlen);
@@ -322,13 +322,13 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq
 		goto out;
 
 	/* Get new specifier and map it */
-	res = of_irq_map_raw(p, intspec + index * intsize, intsize,
+	res = of_irq_parse_raw(p, intspec + index * intsize, intsize,
 			     addr, out_irq);
  out:
 	of_node_put(p);
 	return res;
 }
-EXPORT_SYMBOL_GPL(of_irq_map_one);
+EXPORT_SYMBOL_GPL(of_irq_parse_one);
 
 /**
  * of_irq_to_resource - Decode a node's IRQ and return it as a resource
diff --git a/drivers/of/of_pci_irq.c b/drivers/of/of_pci_irq.c
index 677053813211..dceec1048dab 100644
--- a/drivers/of/of_pci_irq.c
+++ b/drivers/of/of_pci_irq.c
@@ -5,7 +5,7 @@
 #include <asm/prom.h>
 
 /**
- * of_irq_map_pci - Resolve the interrupt for a PCI device
+ * of_irq_parse_pci - Resolve the interrupt for a PCI device
  * @pdev:       the device whose interrupt is to be resolved
  * @out_irq:    structure of_irq filled by this function
  *
@@ -15,7 +15,7 @@
  * PCI tree until an device-node is found, at which point it will finish
  * resolving using the OF tree walking.
  */
-int of_irq_map_pci(const struct pci_dev *pdev, struct of_irq *out_irq)
+int of_irq_parse_pci(const struct pci_dev *pdev, struct of_irq *out_irq)
 {
 	struct device_node *dn, *ppnode;
 	struct pci_dev *ppdev;
@@ -30,7 +30,7 @@ int of_irq_map_pci(const struct pci_dev *pdev, struct of_irq *out_irq)
 	 */
 	dn = pci_device_to_OF_node(pdev);
 	if (dn) {
-		rc = of_irq_map_one(dn, 0, out_irq);
+		rc = of_irq_parse_one(dn, 0, out_irq);
 		if (!rc)
 			return rc;
 	}
@@ -88,6 +88,6 @@ int of_irq_map_pci(const struct pci_dev *pdev, struct of_irq *out_irq)
 	lspec_be = cpu_to_be32(lspec);
 	laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
 	laddr[1]  = laddr[2] = cpu_to_be32(0);
-	return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq);
+	return of_irq_parse_raw(ppnode, &lspec_be, 1, laddr, out_irq);
 }
-EXPORT_SYMBOL_GPL(of_irq_map_pci);
+EXPORT_SYMBOL_GPL(of_irq_parse_pci);
diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index 729d5a101d62..05f81807d05b 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -650,7 +650,7 @@ static int __init mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	struct of_irq oirq;
 	int ret;
 
-	ret = of_irq_map_pci(dev, &oirq);
+	ret = of_irq_parse_pci(dev, &oirq);
 	if (ret)
 		return ret;
 
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
index fcd63baee5f2..a00bc71e62a3 100644
--- a/include/linux/of_irq.h
+++ b/include/linux/of_irq.h
@@ -35,12 +35,12 @@ typedef int (*of_irq_init_cb_t)(struct device_node *, struct device_node *);
 #if defined(CONFIG_PPC32) && defined(CONFIG_PPC_PMAC)
 extern unsigned int of_irq_workarounds;
 extern struct device_node *of_irq_dflt_pic;
-extern int of_irq_map_oldworld(struct device_node *device, int index,
+extern int of_irq_parse_oldworld(struct device_node *device, int index,
 			       struct of_irq *out_irq);
 #else /* CONFIG_PPC32 && CONFIG_PPC_PMAC */
 #define of_irq_workarounds (0)
 #define of_irq_dflt_pic (NULL)
-static inline int of_irq_map_oldworld(struct device_node *device, int index,
+static inline int of_irq_parse_oldworld(struct device_node *device, int index,
 				      struct of_irq *out_irq)
 {
 	return -EINVAL;
@@ -48,10 +48,10 @@ static inline int of_irq_map_oldworld(struct device_node *device, int index,
 #endif /* CONFIG_PPC32 && CONFIG_PPC_PMAC */
 
 
-extern int of_irq_map_raw(struct device_node *parent, const __be32 *intspec,
+extern int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec,
 			  u32 ointsize, const __be32 *addr,
 			  struct of_irq *out_irq);
-extern int of_irq_map_one(struct device_node *device, int index,
+extern int of_irq_parse_one(struct device_node *device, int index,
 			  struct of_irq *out_irq);
 extern unsigned int irq_create_of_mapping(struct device_node *controller,
 					  const u32 *intspec,
diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
index fd9c408631a0..839ba20808fe 100644
--- a/include/linux/of_pci.h
+++ b/include/linux/of_pci.h
@@ -6,7 +6,7 @@
 
 struct pci_dev;
 struct of_irq;
-int of_irq_map_pci(const struct pci_dev *pdev, struct of_irq *out_irq);
+int of_irq_parse_pci(const struct pci_dev *pdev, struct of_irq *out_irq);
 
 struct device_node;
 struct device_node *of_pci_find_child_device(struct device_node *parent,
-- 
cgit v1.2.3


From 530210c7814e83564c7ca7bca8192515042c0b63 Mon Sep 17 00:00:00 2001
From: Grant Likely
Date: Sun, 15 Sep 2013 16:39:11 +0100
Subject: of/irq: Replace of_irq with of_phandle_args

struct of_irq and struct of_phandle_args are exactly the same structure.
This patch makes the kernel use of_phandle_args everywhere. This in
itself isn't a big deal, but it makes some follow-on patches simpler.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Michal Simek <monstr@monstr.eu>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/arm/mach-integrator/pci_v3.c              |  5 ++---
 arch/microblaze/pci/pci-common.c               |  9 ++++-----
 arch/mips/pci/fixup-lantiq.c                   |  5 ++---
 arch/mips/pci/pci-rt3883.c                     |  6 ++----
 arch/powerpc/kernel/pci-common.c               |  9 ++++-----
 arch/powerpc/platforms/cell/celleb_scc_pciex.c |  5 ++---
 arch/powerpc/platforms/cell/celleb_scc_sio.c   |  5 ++---
 arch/powerpc/platforms/cell/spider-pic.c       |  6 +++---
 arch/powerpc/platforms/cell/spu_manage.c       | 12 ++++++------
 arch/powerpc/platforms/fsl_uli1575.c           |  8 +++-----
 arch/powerpc/platforms/powermac/pic.c          |  8 ++++----
 arch/powerpc/platforms/pseries/event_sources.c |  7 +++----
 arch/powerpc/sysdev/mpic_msi.c                 |  6 +++---
 arch/x86/kernel/devicetree.c                   |  5 ++---
 drivers/of/irq.c                               | 15 +++++++--------
 drivers/of/of_pci_irq.c                        |  2 +-
 drivers/pci/host/pci-mvebu.c                   |  5 ++---
 include/linux/of_irq.h                         | 24 ++++--------------------
 include/linux/of_pci.h                         |  4 ++--
 19 files changed, 58 insertions(+), 88 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index 0f496cc51f36..2d6b4da90fb4 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -837,7 +837,7 @@ static struct hw_pci pci_v3 __initdata = {
 
 static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	struct of_irq oirq;
+	struct of_phandle_args oirq;
 	int ret;
 
 	ret = of_irq_parse_pci(dev, &oirq);
@@ -847,8 +847,7 @@ static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin)
 		return 0;
 	}
 
-	return irq_create_of_mapping(oirq.controller, oirq.specifier,
-				     oirq.size);
+	return irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count);
 }
 
 static int __init pci_v3_dtprobe(struct platform_device *pdev,
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 4d5b1a9cd790..c9302c4f8a57 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -199,7 +199,7 @@ void pcibios_set_master(struct pci_dev *dev)
  */
 int pci_read_irq_line(struct pci_dev *pci_dev)
 {
-	struct of_irq oirq;
+	struct of_phandle_args oirq;
 	unsigned int virq;
 
 	/* The current device-tree that iSeries generates from the HV
@@ -243,11 +243,10 @@ int pci_read_irq_line(struct pci_dev *pci_dev)
 			irq_set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
 	} else {
 		pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
-			 oirq.size, oirq.specifier[0], oirq.specifier[1],
-			 of_node_full_name(oirq.controller));
+			 oirq.args_count, oirq.args[0], oirq.args[1],
+			 of_node_full_name(oirq.np));
 
-		virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
-					     oirq.size);
+		virq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count);
 	}
 	if (!virq) {
 		pr_debug(" Failed to map !\n");
diff --git a/arch/mips/pci/fixup-lantiq.c b/arch/mips/pci/fixup-lantiq.c
index 2e8dbfedae53..81ff0b5e6efa 100644
--- a/arch/mips/pci/fixup-lantiq.c
+++ b/arch/mips/pci/fixup-lantiq.c
@@ -25,7 +25,7 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 
 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	struct of_irq dev_irq;
+	struct of_phandle_args dev_irq;
 	int irq;
 
 	if (of_irq_parse_pci(dev, &dev_irq)) {
@@ -33,8 +33,7 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 			slot, pin);
 		return 0;
 	}
-	irq = irq_create_of_mapping(dev_irq.controller, dev_irq.specifier,
-					dev_irq.size);
+	irq = irq_create_of_mapping(dev_irq.np, dev_irq.args, dev_irq.args_count);
 	dev_info(&dev->dev, "SLOT:%d PIN:%d IRQ:%d\n", slot, pin, irq);
 	return irq;
 }
diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
index cae92a05ee70..0f08a5ba0b2a 100644
--- a/arch/mips/pci/pci-rt3883.c
+++ b/arch/mips/pci/pci-rt3883.c
@@ -583,7 +583,7 @@ err_put_intc_node:
 
 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	struct of_irq dev_irq;
+	struct of_phandle_args dev_irq;
 	int err;
 	int irq;
 
@@ -594,9 +594,7 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 		return 0;
 	}
 
-	irq = irq_create_of_mapping(dev_irq.controller,
-				    dev_irq.specifier,
-				    dev_irq.size);
+	irq = irq_create_of_mapping(dev_irq.np, dev_irq.args, dev_irq.args_count);
 
 	if (irq == 0)
 		pr_crit("pci %s: no irq found for pin %u\n",
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 2f4185425ed5..96c46235fda2 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -228,7 +228,7 @@ int pcibios_add_platform_entries(struct pci_dev *pdev)
  */
 static int pci_read_irq_line(struct pci_dev *pci_dev)
 {
-	struct of_irq oirq;
+	struct of_phandle_args oirq;
 	unsigned int virq;
 
 	pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev));
@@ -263,11 +263,10 @@ static int pci_read_irq_line(struct pci_dev *pci_dev)
 			irq_set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
 	} else {
 		pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
-			 oirq.size, oirq.specifier[0], oirq.specifier[1],
-			 of_node_full_name(oirq.controller));
+			 oirq.args_count, oirq.args[0], oirq.args[1],
+			 of_node_full_name(oirq.np));
 
-		virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
-					     oirq.size);
+		virq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count);
 	}
 	if(virq == NO_IRQ) {
 		pr_debug(" Failed to map !\n");
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index 40bc371096b7..e8d34d1f640d 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -486,7 +486,7 @@ static __init int celleb_setup_pciex(struct device_node *node,
 				     struct pci_controller *phb)
 {
 	struct resource	r;
-	struct of_irq oirq;
+	struct of_phandle_args oirq;
 	int virq;
 
 	/* SMMIO registers; used inside this file */
@@ -511,8 +511,7 @@ static __init int celleb_setup_pciex(struct device_node *node,
 		pr_err("PCIEXC:Failed to map irq\n");
 		goto error;
 	}
-	virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
-				     oirq.size);
+	virq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count);
 	if (request_irq(virq, pciex_handle_internal_irq,
 			0, "pciex", (void *)phb)) {
 		pr_err("PCIEXC:Failed to request irq\n");
diff --git a/arch/powerpc/platforms/cell/celleb_scc_sio.c b/arch/powerpc/platforms/cell/celleb_scc_sio.c
index 96388b202f4e..06046d512130 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_sio.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_sio.c
@@ -45,7 +45,7 @@ static int __init txx9_serial_init(void)
 	struct device_node *node;
 	int i;
 	struct uart_port req;
-	struct of_irq irq;
+	struct of_phandle_args irq;
 	struct resource res;
 
 	for_each_compatible_node(node, "serial", "toshiba,sio-scc") {
@@ -66,8 +66,7 @@ static int __init txx9_serial_init(void)
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
 			req.membase = ioremap(req.mapbase, 0x24);
 #endif
-			req.irq = irq_create_of_mapping(irq.controller,
-				irq.specifier, irq.size);
+			req.irq = irq_create_of_mapping(irq.np, irq.args, irq.args_count);
 			req.flags |= UPF_IOREMAP | UPF_BUGGY_UART
 				/*HAVE_CTS_LINE*/;
 			req.uartclk = 83300000;
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index b491f406560a..6e842fdbfcab 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -235,10 +235,10 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
 	/* First, we check whether we have a real "interrupts" in the device
 	 * tree in case the device-tree is ever fixed
 	 */
-	struct of_irq oirq;
+	struct of_phandle_args oirq;
 	if (of_irq_parse_one(pic->host->of_node, 0, &oirq) == 0) {
-		virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
-					     oirq.size);
+		virq = irq_create_of_mapping(oirq.np, oirq.args,
+					     oirq.args_count);
 		return virq;
 	}
 
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index e6cdb81a0959..e9eb4f83b1d5 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -177,7 +177,7 @@ out:
 
 static int __init spu_map_interrupts(struct spu *spu, struct device_node *np)
 {
-	struct of_irq oirq;
+	struct of_phandle_args oirq;
 	int ret;
 	int i;
 
@@ -188,10 +188,10 @@ static int __init spu_map_interrupts(struct spu *spu, struct device_node *np)
 			goto err;
 		}
 		ret = -EINVAL;
-		pr_debug("  irq %d no 0x%x on %s\n", i, oirq.specifier[0],
-			 oirq.controller->full_name);
-		spu->irqs[i] = irq_create_of_mapping(oirq.controller,
-					oirq.specifier, oirq.size);
+		pr_debug("  irq %d no 0x%x on %s\n", i, oirq.args[0],
+			 oirq.np->full_name);
+		spu->irqs[i] = irq_create_of_mapping(oirq.np,
+					oirq.args, oirq.args_count);
 		if (spu->irqs[i] == NO_IRQ) {
 			pr_debug("spu_new: failed to map it !\n");
 			goto err;
@@ -200,7 +200,7 @@ static int __init spu_map_interrupts(struct spu *spu, struct device_node *np)
 	return 0;
 
 err:
-	pr_debug("failed to map irq %x for spu %s\n", *oirq.specifier,
+	pr_debug("failed to map irq %x for spu %s\n", *oirq.args,
 		spu->name);
 	for (; i >= 0; i--) {
 		if (spu->irqs[i] != NO_IRQ)
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index ac539c1cd808..288226deffa3 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -321,8 +321,8 @@ static void hpcd_final_uli5288(struct pci_dev *dev)
 {
 	struct pci_controller *hose = pci_bus_to_host(dev->bus);
 	struct device_node *hosenode = hose ? hose->dn : NULL;
-	struct of_irq oirq;
-	int virq, pin = 2;
+	struct of_phandle_args oirq;
+	int pin = 2;
 	u32 laddr[3];
 
 	if (!machine_is(mpc86xx_hpcd))
@@ -334,9 +334,7 @@ static void hpcd_final_uli5288(struct pci_dev *dev)
 	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
 	laddr[1] = laddr[2] = 0;
 	of_irq_parse_raw(hosenode, &pin, 1, laddr, &oirq);
-	virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
-				     oirq.size);
-	dev->irq = virq;
+	dev->irq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count);
 }
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, hpcd_quirk_uli1575);
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 720663e29f47..4c24bf60d39d 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -394,7 +394,7 @@ static void __init pmac_pic_probe_oldstyle(void)
 }
 
 int of_irq_parse_oldworld(struct device_node *device, int index,
-			struct of_irq *out_irq)
+			struct of_phandle_args *out_irq)
 {
 	const u32 *ints = NULL;
 	int intlen;
@@ -422,9 +422,9 @@ int of_irq_parse_oldworld(struct device_node *device, int index,
 	if (index >= intlen)
 		return -EINVAL;
 
-	out_irq->controller = NULL;
-	out_irq->specifier[0] = ints[index];
-	out_irq->size = 1;
+	out_irq->np = NULL;
+	out_irq->args[0] = ints[index];
+	out_irq->args_count = 1;
 
 	return 0;
 }
diff --git a/arch/powerpc/platforms/pseries/event_sources.c b/arch/powerpc/platforms/pseries/event_sources.c
index 850c18c457ad..6dcf9cc38ffb 100644
--- a/arch/powerpc/platforms/pseries/event_sources.c
+++ b/arch/powerpc/platforms/pseries/event_sources.c
@@ -25,7 +25,7 @@ void request_event_sources_irqs(struct device_node *np,
 				const char *name)
 {
 	int i, index, count = 0;
-	struct of_irq oirq;
+	struct of_phandle_args oirq;
 	const u32 *opicprop;
 	unsigned int opicplen;
 	unsigned int virqs[16];
@@ -59,9 +59,8 @@ void request_event_sources_irqs(struct device_node *np,
 		     index++) {
 			if (count > 15)
 				break;
-			virqs[count] = irq_create_of_mapping(oirq.controller,
-							    oirq.specifier,
-							    oirq.size);
+			virqs[count] = irq_create_of_mapping(oirq.np, oirq.args,
+							    oirq.args_count);
 			if (virqs[count] == NO_IRQ) {
 				pr_err("event-sources: Unable to allocate "
 				       "interrupt number for %s\n",
diff --git a/arch/powerpc/sysdev/mpic_msi.c b/arch/powerpc/sysdev/mpic_msi.c
index 463e3a7c193c..7dc39f35a4cc 100644
--- a/arch/powerpc/sysdev/mpic_msi.c
+++ b/arch/powerpc/sysdev/mpic_msi.c
@@ -35,7 +35,7 @@ static int mpic_msi_reserve_u3_hwirqs(struct mpic *mpic)
 	const struct irq_domain_ops *ops = mpic->irqhost->ops;
 	struct device_node *np;
 	int flags, index, i;
-	struct of_irq oirq;
+	struct of_phandle_args oirq;
 
 	pr_debug("mpic: found U3, guessing msi allocator setup\n");
 
@@ -64,8 +64,8 @@ static int mpic_msi_reserve_u3_hwirqs(struct mpic *mpic)
 
 		index = 0;
 		while (of_irq_parse_one(np, index++, &oirq) == 0) {
-			ops->xlate(mpic->irqhost, NULL, oirq.specifier,
-						oirq.size, &hwirq, &flags);
+			ops->xlate(mpic->irqhost, NULL, oirq.args,
+						oirq.args_count, &hwirq, &flags);
 			msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, hwirq);
 		}
 	}
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 3ac6398e5361..00986988a10e 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -105,7 +105,7 @@ struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
 
 static int x86_of_pci_irq_enable(struct pci_dev *dev)
 {
-	struct of_irq oirq;
+	struct of_phandle_args oirq;
 	u32 virq;
 	int ret;
 	u8 pin;
@@ -120,8 +120,7 @@ static int x86_of_pci_irq_enable(struct pci_dev *dev)
 	if (ret)
 		return ret;
 
-	virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
-			oirq.size);
+	virq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count);
 	if (virq == 0)
 		return -EINVAL;
 	dev->irq = virq;
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 410aa2415f42..a7db38a63403 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -36,13 +36,12 @@
  */
 unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
 {
-	struct of_irq oirq;
+	struct of_phandle_args oirq;
 
 	if (of_irq_parse_one(dev, index, &oirq))
 		return 0;
 
-	return irq_create_of_mapping(oirq.controller, oirq.specifier,
-				     oirq.size);
+	return irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count);
 }
 EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
 
@@ -94,7 +93,7 @@ struct device_node *of_irq_find_parent(struct device_node *child)
  * node exist for the parent.
  */
 int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec,
-		   u32 ointsize, const __be32 *addr, struct of_irq *out_irq)
+		   u32 ointsize, const __be32 *addr, struct of_phandle_args *out_irq)
 {
 	struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
 	const __be32 *tmp, *imap, *imask;
@@ -156,10 +155,10 @@ int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec,
 				NULL) {
 			pr_debug(" -> got it !\n");
 			for (i = 0; i < intsize; i++)
-				out_irq->specifier[i] =
+				out_irq->args[i] =
 						of_read_number(intspec +i, 1);
-			out_irq->size = intsize;
-			out_irq->controller = ipar;
+			out_irq->args_count = intsize;
+			out_irq->np = ipar;
 			of_node_put(old);
 			return 0;
 		}
@@ -280,7 +279,7 @@ EXPORT_SYMBOL_GPL(of_irq_parse_raw);
  * This function resolves an interrupt, walking the tree, for a given
  * device-tree node. It's the high level pendant to of_irq_parse_raw().
  */
-int of_irq_parse_one(struct device_node *device, int index, struct of_irq *out_irq)
+int of_irq_parse_one(struct device_node *device, int index, struct of_phandle_args *out_irq)
 {
 	struct device_node *p;
 	const __be32 *intspec, *tmp, *addr;
diff --git a/drivers/of/of_pci_irq.c b/drivers/of/of_pci_irq.c
index dceec1048dab..ee3293d4b66b 100644
--- a/drivers/of/of_pci_irq.c
+++ b/drivers/of/of_pci_irq.c
@@ -15,7 +15,7 @@
  * PCI tree until an device-node is found, at which point it will finish
  * resolving using the OF tree walking.
  */
-int of_irq_parse_pci(const struct pci_dev *pdev, struct of_irq *out_irq)
+int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq)
 {
 	struct device_node *dn, *ppnode;
 	struct pci_dev *ppdev;
diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index 05f81807d05b..c5e57f82b9af 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -647,15 +647,14 @@ static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
 
 static int __init mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	struct of_irq oirq;
+	struct of_phandle_args oirq;
 	int ret;
 
 	ret = of_irq_parse_pci(dev, &oirq);
 	if (ret)
 		return ret;
 
-	return irq_create_of_mapping(oirq.controller, oirq.specifier,
-				     oirq.size);
+	return irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count);
 }
 
 static struct pci_bus *mvebu_pcie_scan_bus(int nr, struct pci_sys_data *sys)
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
index a00bc71e62a3..8d9f85560d48 100644
--- a/include/linux/of_irq.h
+++ b/include/linux/of_irq.h
@@ -8,22 +8,6 @@
 #include <linux/ioport.h>
 #include <linux/of.h>
 
-/**
- * of_irq - container for device_node/irq_specifier pair for an irq controller
- * @controller: pointer to interrupt controller device tree node
- * @size: size of interrupt specifier
- * @specifier: array of cells @size long specifing the specific interrupt
- *
- * This structure is returned when an interrupt is mapped. The controller
- * field needs to be put() after use
- */
-#define OF_MAX_IRQ_SPEC		4 /* We handle specifiers of at most 4 cells */
-struct of_irq {
-	struct device_node *controller; /* Interrupt controller node */
-	u32 size; /* Specifier size */
-	u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
-};
-
 typedef int (*of_irq_init_cb_t)(struct device_node *, struct device_node *);
 
 /*
@@ -36,12 +20,12 @@ typedef int (*of_irq_init_cb_t)(struct device_node *, struct device_node *);
 extern unsigned int of_irq_workarounds;
 extern struct device_node *of_irq_dflt_pic;
 extern int of_irq_parse_oldworld(struct device_node *device, int index,
-			       struct of_irq *out_irq);
+			       struct of_phandle_args *out_irq);
 #else /* CONFIG_PPC32 && CONFIG_PPC_PMAC */
 #define of_irq_workarounds (0)
 #define of_irq_dflt_pic (NULL)
 static inline int of_irq_parse_oldworld(struct device_node *device, int index,
-				      struct of_irq *out_irq)
+				      struct of_phandle_args *out_irq)
 {
 	return -EINVAL;
 }
@@ -50,9 +34,9 @@ static inline int of_irq_parse_oldworld(struct device_node *device, int index,
 
 extern int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec,
 			  u32 ointsize, const __be32 *addr,
-			  struct of_irq *out_irq);
+			  struct of_phandle_args *out_irq);
 extern int of_irq_parse_one(struct device_node *device, int index,
-			  struct of_irq *out_irq);
+			  struct of_phandle_args *out_irq);
 extern unsigned int irq_create_of_mapping(struct device_node *controller,
 					  const u32 *intspec,
 					  unsigned int intsize);
diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
index 839ba20808fe..f297237349e8 100644
--- a/include/linux/of_pci.h
+++ b/include/linux/of_pci.h
@@ -5,8 +5,8 @@
 #include <linux/msi.h>
 
 struct pci_dev;
-struct of_irq;
-int of_irq_parse_pci(const struct pci_dev *pdev, struct of_irq *out_irq);
+struct of_phandle_args;
+int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq);
 
 struct device_node;
 struct device_node *of_pci_find_child_device(struct device_node *parent,
-- 
cgit v1.2.3


From e6d30ab1e7d1281784672c0fc2ffa385cfb7279e Mon Sep 17 00:00:00 2001
From: Grant Likely
Date: Sun, 15 Sep 2013 16:55:53 +0100
Subject: of/irq: simplify args to irq_create_of_mapping

All the callers of irq_create_of_mapping() pass the contents of a struct
of_phandle_args structure to the function. Since all the callers already
have an of_phandle_args pointer, why not pass it directly to
irq_create_of_mapping()?

Signed-off-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Michal Simek <monstr@monstr.eu>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/arm/mach-integrator/pci_v3.c              |  2 +-
 arch/microblaze/pci/pci-common.c               |  2 +-
 arch/mips/pci/fixup-lantiq.c                   |  2 +-
 arch/mips/pci/pci-rt3883.c                     |  2 +-
 arch/powerpc/kernel/pci-common.c               |  2 +-
 arch/powerpc/platforms/cell/celleb_scc_pciex.c |  2 +-
 arch/powerpc/platforms/cell/celleb_scc_sio.c   |  2 +-
 arch/powerpc/platforms/cell/spider-pic.c       |  7 ++-----
 arch/powerpc/platforms/cell/spu_manage.c       |  3 +--
 arch/powerpc/platforms/fsl_uli1575.c           |  2 +-
 arch/powerpc/platforms/pseries/event_sources.c |  3 +--
 arch/x86/kernel/devicetree.c                   |  2 +-
 drivers/of/irq.c                               |  2 +-
 drivers/pci/host/pci-mvebu.c                   |  2 +-
 include/linux/of_irq.h                         |  4 +---
 kernel/irq/irqdomain.c                         | 13 ++++++-------
 16 files changed, 22 insertions(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index 2d6b4da90fb4..bb3aeb31a54e 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -847,7 +847,7 @@ static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin)
 		return 0;
 	}
 
-	return irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count);
+	return irq_create_of_mapping(&oirq);
 }
 
 static int __init pci_v3_dtprobe(struct platform_device *pdev,
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index c9302c4f8a57..60b386c72c57 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -246,7 +246,7 @@ int pci_read_irq_line(struct pci_dev *pci_dev)
 			 oirq.args_count, oirq.args[0], oirq.args[1],
 			 of_node_full_name(oirq.np));
 
-		virq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count);
+		virq = irq_create_of_mapping(&oirq);
 	}
 	if (!virq) {
 		pr_debug(" Failed to map !\n");
diff --git a/arch/mips/pci/fixup-lantiq.c b/arch/mips/pci/fixup-lantiq.c
index 81ff0b5e6efa..aef60e75003e 100644
--- a/arch/mips/pci/fixup-lantiq.c
+++ b/arch/mips/pci/fixup-lantiq.c
@@ -33,7 +33,7 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 			slot, pin);
 		return 0;
 	}
-	irq = irq_create_of_mapping(dev_irq.np, dev_irq.args, dev_irq.args_count);
+	irq = irq_create_of_mapping(&dev_irq);
 	dev_info(&dev->dev, "SLOT:%d PIN:%d IRQ:%d\n", slot, pin, irq);
 	return irq;
 }
diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
index 0f08a5ba0b2a..eadc4310cd36 100644
--- a/arch/mips/pci/pci-rt3883.c
+++ b/arch/mips/pci/pci-rt3883.c
@@ -594,7 +594,7 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 		return 0;
 	}
 
-	irq = irq_create_of_mapping(dev_irq.np, dev_irq.args, dev_irq.args_count);
+	irq = irq_create_of_mapping(&dev_irq);
 
 	if (irq == 0)
 		pr_crit("pci %s: no irq found for pin %u\n",
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 96c46235fda2..a1e3e40ca3fd 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -266,7 +266,7 @@ static int pci_read_irq_line(struct pci_dev *pci_dev)
 			 oirq.args_count, oirq.args[0], oirq.args[1],
 			 of_node_full_name(oirq.np));
 
-		virq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count);
+		virq = irq_create_of_mapping(&oirq);
 	}
 	if(virq == NO_IRQ) {
 		pr_debug(" Failed to map !\n");
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index e8d34d1f640d..b3ea96db5b06 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -511,7 +511,7 @@ static __init int celleb_setup_pciex(struct device_node *node,
 		pr_err("PCIEXC:Failed to map irq\n");
 		goto error;
 	}
-	virq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count);
+	virq = irq_create_of_mapping(&oirq);
 	if (request_irq(virq, pciex_handle_internal_irq,
 			0, "pciex", (void *)phb)) {
 		pr_err("PCIEXC:Failed to request irq\n");
diff --git a/arch/powerpc/platforms/cell/celleb_scc_sio.c b/arch/powerpc/platforms/cell/celleb_scc_sio.c
index 06046d512130..c8eb57193826 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_sio.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_sio.c
@@ -66,7 +66,7 @@ static int __init txx9_serial_init(void)
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
 			req.membase = ioremap(req.mapbase, 0x24);
 #endif
-			req.irq = irq_create_of_mapping(irq.np, irq.args, irq.args_count);
+			req.irq = irq_create_of_mapping(&irq);
 			req.flags |= UPF_IOREMAP | UPF_BUGGY_UART
 				/*HAVE_CTS_LINE*/;
 			req.uartclk = 83300000;
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index 6e842fdbfcab..d20680446174 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -236,11 +236,8 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
 	 * tree in case the device-tree is ever fixed
 	 */
 	struct of_phandle_args oirq;
-	if (of_irq_parse_one(pic->host->of_node, 0, &oirq) == 0) {
-		virq = irq_create_of_mapping(oirq.np, oirq.args,
-					     oirq.args_count);
-		return virq;
-	}
+	if (of_irq_parse_one(pic->host->of_node, 0, &oirq) == 0)
+		return irq_create_of_mapping(&oirq);
 
 	/* Now do the horrible hacks */
 	tmp = of_get_property(pic->host->of_node, "#interrupt-cells", NULL);
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index e9eb4f83b1d5..c3327f3d8cf7 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -190,8 +190,7 @@ static int __init spu_map_interrupts(struct spu *spu, struct device_node *np)
 		ret = -EINVAL;
 		pr_debug("  irq %d no 0x%x on %s\n", i, oirq.args[0],
 			 oirq.np->full_name);
-		spu->irqs[i] = irq_create_of_mapping(oirq.np,
-					oirq.args, oirq.args_count);
+		spu->irqs[i] = irq_create_of_mapping(&oirq);
 		if (spu->irqs[i] == NO_IRQ) {
 			pr_debug("spu_new: failed to map it !\n");
 			goto err;
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index 288226deffa3..8904046556ad 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -334,7 +334,7 @@ static void hpcd_final_uli5288(struct pci_dev *dev)
 	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
 	laddr[1] = laddr[2] = 0;
 	of_irq_parse_raw(hosenode, &pin, 1, laddr, &oirq);
-	dev->irq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count);
+	dev->irq = irq_create_of_mapping(&oirq);
 }
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, hpcd_quirk_uli1575);
diff --git a/arch/powerpc/platforms/pseries/event_sources.c b/arch/powerpc/platforms/pseries/event_sources.c
index 6dcf9cc38ffb..18380e8f6dfe 100644
--- a/arch/powerpc/platforms/pseries/event_sources.c
+++ b/arch/powerpc/platforms/pseries/event_sources.c
@@ -59,8 +59,7 @@ void request_event_sources_irqs(struct device_node *np,
 		     index++) {
 			if (count > 15)
 				break;
-			virqs[count] = irq_create_of_mapping(oirq.np, oirq.args,
-							    oirq.args_count);
+			virqs[count] = irq_create_of_mapping(&oirq);
 			if (virqs[count] == NO_IRQ) {
 				pr_err("event-sources: Unable to allocate "
 				       "interrupt number for %s\n",
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 00986988a10e..d39948f654a0 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -120,7 +120,7 @@ static int x86_of_pci_irq_enable(struct pci_dev *dev)
 	if (ret)
 		return ret;
 
-	virq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count);
+	virq = irq_create_of_mapping(&oirq);
 	if (virq == 0)
 		return -EINVAL;
 	dev->irq = virq;
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index a7db38a63403..84184c44e8db 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -41,7 +41,7 @@ unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
 	if (of_irq_parse_one(dev, index, &oirq))
 		return 0;
 
-	return irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count);
+	return irq_create_of_mapping(&oirq);
 }
 EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
 
diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index c5e57f82b9af..3a8d01ec50f7 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -654,7 +654,7 @@ static int __init mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	if (ret)
 		return ret;
 
-	return irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count);
+	return irq_create_of_mapping(&oirq);
 }
 
 static struct pci_bus *mvebu_pcie_scan_bus(int nr, struct pci_sys_data *sys)
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
index 8d9f85560d48..3bbba8d6adc8 100644
--- a/include/linux/of_irq.h
+++ b/include/linux/of_irq.h
@@ -37,9 +37,7 @@ extern int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec,
 			  struct of_phandle_args *out_irq);
 extern int of_irq_parse_one(struct device_node *device, int index,
 			  struct of_phandle_args *out_irq);
-extern unsigned int irq_create_of_mapping(struct device_node *controller,
-					  const u32 *intspec,
-					  unsigned int intsize);
+extern unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data);
 extern int of_irq_to_resource(struct device_node *dev, int index,
 			      struct resource *r);
 extern int of_irq_count(struct device_node *dev);
diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index 706724e9835d..cf68bb36fe58 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -465,27 +465,26 @@ int irq_create_strict_mappings(struct irq_domain *domain, unsigned int irq_base,
 }
 EXPORT_SYMBOL_GPL(irq_create_strict_mappings);
 
-unsigned int irq_create_of_mapping(struct device_node *controller,
-				   const u32 *intspec, unsigned int intsize)
+unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data)
 {
 	struct irq_domain *domain;
 	irq_hw_number_t hwirq;
 	unsigned int type = IRQ_TYPE_NONE;
 	unsigned int virq;
 
-	domain = controller ? irq_find_host(controller) : irq_default_domain;
+	domain = irq_data->np ? irq_find_host(irq_data->np) : irq_default_domain;
 	if (!domain) {
 		pr_warn("no irq domain found for %s !\n",
-			of_node_full_name(controller));
+			of_node_full_name(irq_data->np));
 		return 0;
 	}
 
 	/* If domain has no translation, then we assume interrupt line */
 	if (domain->ops->xlate == NULL)
-		hwirq = intspec[0];
+		hwirq = irq_data->args[0];
 	else {
-		if (domain->ops->xlate(domain, controller, intspec, intsize,
-				     &hwirq, &type))
+		if (domain->ops->xlate(domain, irq_data->np, irq_data->args,
+					irq_data->args_count, &hwirq, &type))
 			return 0;
 	}
 
-- 
cgit v1.2.3


From 2361613206e66ce59cc0e08efa8d98ec15b84ed1 Mon Sep 17 00:00:00 2001
From: Grant Likely
Date: Sun, 15 Sep 2013 22:32:39 +0100
Subject: of/irq: Refactor interrupt-map parsing

All the users of of_irq_parse_raw pass in a raw interrupt specifier from
the device tree and expect it to be returned (possibly modified) in an
of_phandle_args structure. However, the primary function of
of_irq_parse_raw() is to check for translations due to the presence of
one or more interrupt-map properties. The actual placing of the data
into an of_phandle_args structure is trivial. If it is refactored to
accept an of_phandle_args structure directly, then it becomes possible
to consume of_phandle_args from other sources. This is important for an
upcoming patch that allows a device to be connected to more than one
interrupt parent. It also simplifies the code a bit.

The biggest complication with this patch is that the old version works
on the interrupt specifiers in __be32 form, but the of_phandle_args
structure is intended to carry it in the cpu-native version. A bit of
churn was required to make this work. In the end it results in tighter
code, so the churn is worth it.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/fsl_uli1575.c |   6 +-
 drivers/of/irq.c                     | 108 ++++++++++++++++++-----------------
 drivers/of/of_pci_irq.c              |   7 ++-
 include/linux/of_irq.h               |   5 +-
 4 files changed, 67 insertions(+), 59 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index 8904046556ad..b97f6f3d3c5b 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -322,7 +322,6 @@ static void hpcd_final_uli5288(struct pci_dev *dev)
 	struct pci_controller *hose = pci_bus_to_host(dev->bus);
 	struct device_node *hosenode = hose ? hose->dn : NULL;
 	struct of_phandle_args oirq;
-	int pin = 2;
 	u32 laddr[3];
 
 	if (!machine_is(mpc86xx_hpcd))
@@ -331,9 +330,12 @@ static void hpcd_final_uli5288(struct pci_dev *dev)
 	if (!hosenode)
 		return;
 
+	oirq.np = hosenode;
+	oirq.args[0] = 2;
+	oirq.args_count = 1;
 	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
 	laddr[1] = laddr[2] = 0;
-	of_irq_parse_raw(hosenode, &pin, 1, laddr, &oirq);
+	of_irq_parse_raw(laddr, &oirq);
 	dev->irq = irq_create_of_mapping(&oirq);
 }
 
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 84184c44e8db..0ed5ed4a5f9b 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -80,31 +80,32 @@ struct device_node *of_irq_find_parent(struct device_node *child)
 /**
  * of_irq_parse_raw - Low level interrupt tree parsing
  * @parent:	the device interrupt parent
- * @intspec:	interrupt specifier ("interrupts" property of the device)
- * @ointsize:   size of the passed in interrupt specifier
- * @addr:	address specifier (start of "reg" property of the device)
- * @out_irq:	structure of_irq filled by this function
+ * @addr:	address specifier (start of "reg" property of the device) in be32 format
+ * @out_irq:	structure of_irq updated by this function
  *
  * Returns 0 on success and a negative number on error
  *
  * This function is a low-level interrupt tree walking function. It
  * can be used to do a partial walk with synthetized reg and interrupts
  * properties, for example when resolving PCI interrupts when no device
- * node exist for the parent.
+ * node exist for the parent. It takes an interrupt specifier structure as
+ * input, walks the tree looking for any interrupt-map properties, translates
+ * the specifier for each map, and then returns the translated map.
  */
-int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec,
-		   u32 ointsize, const __be32 *addr, struct of_phandle_args *out_irq)
+int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 {
 	struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
-	const __be32 *tmp, *imap, *imask;
+	__be32 initial_match_array[8];
+	const __be32 *match_array = initial_match_array;
+	const __be32 *tmp, *imap, *imask, dummy_imask[] = { ~0, ~0, ~0, ~0, ~0 };
 	u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
 	int imaplen, match, i;
 
 	pr_debug("of_irq_parse_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n",
-		 of_node_full_name(parent), be32_to_cpup(intspec),
-		 be32_to_cpup(intspec + 1), ointsize);
+		 of_node_full_name(out_irq->np), out_irq->args[0], out_irq->args[1],
+		 out_irq->args_count);
 
-	ipar = of_node_get(parent);
+	ipar = of_node_get(out_irq->np);
 
 	/* First get the #interrupt-cells property of the current cursor
 	 * that tells us how to interpret the passed-in intspec. If there
@@ -127,7 +128,7 @@ int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec,
 
 	pr_debug("of_irq_parse_raw: ipar=%s, size=%d\n", of_node_full_name(ipar), intsize);
 
-	if (ointsize != intsize)
+	if (out_irq->args_count != intsize)
 		return -EINVAL;
 
 	/* Look for this #address-cells. We have to implement the old linux
@@ -146,6 +147,21 @@ int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec,
 
 	pr_debug(" -> addrsize=%d\n", addrsize);
 
+	/* If we were passed no "reg" property and we attempt to parse
+	 * an interrupt-map, then #address-cells must be 0.
+	 * Fail if it's not.
+	 */
+	if (addr == NULL && addrsize != 0) {
+		pr_debug(" -> no reg passed in when needed !\n");
+		return -EINVAL;
+	}
+
+	/* Precalculate the match array - this simplifies match loop */
+	for (i = 0; i < addrsize; i++)
+		initial_match_array[i] = addr[i];
+	for (i = 0; i < intsize; i++)
+		initial_match_array[addrsize + i] = cpu_to_be32(out_irq->args[i]);
+
 	/* Now start the actual "proper" walk of the interrupt tree */
 	while (ipar != NULL) {
 		/* Now check if cursor is an interrupt-controller and if it is
@@ -154,11 +170,6 @@ int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec,
 		if (of_get_property(ipar, "interrupt-controller", NULL) !=
 				NULL) {
 			pr_debug(" -> got it !\n");
-			for (i = 0; i < intsize; i++)
-				out_irq->args[i] =
-						of_read_number(intspec +i, 1);
-			out_irq->args_count = intsize;
-			out_irq->np = ipar;
 			of_node_put(old);
 			return 0;
 		}
@@ -175,34 +186,16 @@ int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec,
 
 		/* Look for a mask */
 		imask = of_get_property(ipar, "interrupt-map-mask", NULL);
-
-		/* If we were passed no "reg" property and we attempt to parse
-		 * an interrupt-map, then #address-cells must be 0.
-		 * Fail if it's not.
-		 */
-		if (addr == NULL && addrsize != 0) {
-			pr_debug(" -> no reg passed in when needed !\n");
-			goto fail;
-		}
+		if (!imask)
+			imask = dummy_imask;
 
 		/* Parse interrupt-map */
 		match = 0;
 		while (imaplen > (addrsize + intsize + 1) && !match) {
 			/* Compare specifiers */
 			match = 1;
-			for (i = 0; i < addrsize && match; ++i) {
-				__be32 mask = imask ? imask[i]
-						    : cpu_to_be32(0xffffffffu);
-				match = ((addr[i] ^ imap[i]) & mask) == 0;
-			}
-			for (; i < (addrsize + intsize) && match; ++i) {
-				__be32 mask = imask ? imask[i]
-						    : cpu_to_be32(0xffffffffu);
-				match =
-				   ((intspec[i-addrsize] ^ imap[i]) & mask) == 0;
-			}
-			imap += addrsize + intsize;
-			imaplen -= addrsize + intsize;
+			for (i = 0; i < (addrsize + intsize); i++, imaplen--)
+				match = !((match_array[i] ^ *imap++) & imask[i]);
 
 			pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen);
 
@@ -247,12 +240,18 @@ int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec,
 		if (!match)
 			goto fail;
 
-		of_node_put(old);
-		old = of_node_get(newpar);
+		/*
+		 * Successfully parsed an interrrupt-map translation; copy new
+		 * interrupt specifier into the out_irq structure
+		 */
+		of_node_put(out_irq->np);
+		out_irq->np = of_node_get(newpar);
+
+		match_array = imap - newaddrsize - newintsize;
+		for (i = 0; i < newintsize; i++)
+			out_irq->args[i] = be32_to_cpup(imap - newintsize + i);
+		out_irq->args_count = intsize = newintsize;
 		addrsize = newaddrsize;
-		intsize = newintsize;
-		intspec = imap - intsize;
-		addr = intspec - addrsize;
 
 	skiplevel:
 		/* Iterate again with new parent */
@@ -263,7 +262,7 @@ int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec,
 	}
  fail:
 	of_node_put(ipar);
-	of_node_put(old);
+	of_node_put(out_irq->np);
 	of_node_put(newpar);
 
 	return -EINVAL;
@@ -276,15 +275,16 @@ EXPORT_SYMBOL_GPL(of_irq_parse_raw);
  * @index: index of the interrupt to resolve
  * @out_irq: structure of_irq filled by this function
  *
- * This function resolves an interrupt, walking the tree, for a given
- * device-tree node. It's the high level pendant to of_irq_parse_raw().
+ * This function resolves an interrupt for a node by walking the interrupt tree,
+ * finding which interrupt controller node it is attached to, and returning the
+ * interrupt specifier that can be used to retrieve a Linux IRQ number.
  */
 int of_irq_parse_one(struct device_node *device, int index, struct of_phandle_args *out_irq)
 {
 	struct device_node *p;
 	const __be32 *intspec, *tmp, *addr;
 	u32 intsize, intlen;
-	int res = -EINVAL;
+	int i, res = -EINVAL;
 
 	pr_debug("of_irq_parse_one: dev=%s, index=%d\n", of_node_full_name(device), index);
 
@@ -320,9 +320,15 @@ int of_irq_parse_one(struct device_node *device, int index, struct of_phandle_ar
 	if ((index + 1) * intsize > intlen)
 		goto out;
 
-	/* Get new specifier and map it */
-	res = of_irq_parse_raw(p, intspec + index * intsize, intsize,
-			     addr, out_irq);
+	/* Copy intspec into irq structure */
+	intspec += index * intsize;
+	out_irq->np = p;
+	out_irq->args_count = intsize;
+	for (i = 0; i < intsize; i++)
+		out_irq->args[i] = be32_to_cpup(intspec++);
+
+	/* Check if there are any interrupt-map translations to process */
+	res = of_irq_parse_raw(addr, out_irq);
  out:
 	of_node_put(p);
 	return res;
diff --git a/drivers/of/of_pci_irq.c b/drivers/of/of_pci_irq.c
index ee3293d4b66b..303afebc247a 100644
--- a/drivers/of/of_pci_irq.c
+++ b/drivers/of/of_pci_irq.c
@@ -85,9 +85,12 @@ int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq
 		pdev = ppdev;
 	}
 
+	out_irq->np = ppnode;
+	out_irq->args_count = 1;
+	out_irq->args[0] = lspec;
 	lspec_be = cpu_to_be32(lspec);
 	laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
-	laddr[1]  = laddr[2] = cpu_to_be32(0);
-	return of_irq_parse_raw(ppnode, &lspec_be, 1, laddr, out_irq);
+	laddr[1] = laddr[2] = cpu_to_be32(0);
+	return of_irq_parse_raw(laddr, out_irq);
 }
 EXPORT_SYMBOL_GPL(of_irq_parse_pci);
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
index 3bbba8d6adc8..c0d6dfe80895 100644
--- a/include/linux/of_irq.h
+++ b/include/linux/of_irq.h
@@ -31,10 +31,7 @@ static inline int of_irq_parse_oldworld(struct device_node *device, int index,
 }
 #endif /* CONFIG_PPC32 && CONFIG_PPC_PMAC */
 
-
-extern int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec,
-			  u32 ointsize, const __be32 *addr,
-			  struct of_phandle_args *out_irq);
+extern int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq);
 extern int of_irq_parse_one(struct device_node *device, int index,
 			  struct of_phandle_args *out_irq);
 extern unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data);
-- 
cgit v1.2.3


From a9f10ca76d784023fc45f01f025b54e9960f4ec1 Mon Sep 17 00:00:00 2001
From: Grant Likely
Date: Fri, 11 Oct 2013 22:04:23 +0100
Subject: of: Add testcases for interrupt parsing

This patch extends the DT selftest code with some test cases for the
interrupt parsing functions.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/arm/boot/dts/testcases/tests-interrupts.dtsi | 41 ++++++++++
 arch/arm/boot/dts/testcases/tests.dtsi            |  1 +
 drivers/of/selftest.c                             | 91 +++++++++++++++++++++--
 3 files changed, 127 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm/boot/dts/testcases/tests-interrupts.dtsi

(limited to 'arch')

diff --git a/arch/arm/boot/dts/testcases/tests-interrupts.dtsi b/arch/arm/boot/dts/testcases/tests-interrupts.dtsi
new file mode 100644
index 000000000000..6ecda716e9d4
--- /dev/null
+++ b/arch/arm/boot/dts/testcases/tests-interrupts.dtsi
@@ -0,0 +1,41 @@
+
+/ {
+	testcase-data {
+		interrupts {
+			#address-cells = <0>;
+			test_intc0: intc0 {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			test_intc1: intc1 {
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+
+			test_intc2: intc2 {
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			test_intmap0: intmap0 {
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				interrupt-map = <1 &test_intc0 9>,
+						<2 &test_intc1 10 11 12>,
+						<3 &test_intc2 13 14>,
+						<4 &test_intc2 15 16>;
+			};
+
+			interrupts0 {
+				interrupt-parent = <&test_intc0>;
+				interrupts = <1>, <2>, <3>, <4>;
+			};
+
+			interrupts1 {
+				interrupt-parent = <&test_intmap0>;
+				interrupts = <1>, <2>, <3>, <4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/testcases/tests.dtsi b/arch/arm/boot/dts/testcases/tests.dtsi
index a7c5067622e8..3f123ecc9dd7 100644
--- a/arch/arm/boot/dts/testcases/tests.dtsi
+++ b/arch/arm/boot/dts/testcases/tests.dtsi
@@ -1 +1,2 @@
 /include/ "tests-phandle.dtsi"
+/include/ "tests-interrupts.dtsi"
diff --git a/drivers/of/selftest.c b/drivers/of/selftest.c
index 0eb5c38b4e07..9c80f0b7556b 100644
--- a/drivers/of/selftest.c
+++ b/drivers/of/selftest.c
@@ -9,18 +9,24 @@
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_irq.h>
 #include <linux/list.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
 #include <linux/device.h>
 
-static bool selftest_passed = true;
+static struct selftest_results {
+	int passed;
+	int failed;
+} selftest_results;
+
 #define selftest(result, fmt, ...) { \
 	if (!(result)) { \
-		pr_err("FAIL %s:%i " fmt, __FILE__, __LINE__, ##__VA_ARGS__); \
-		selftest_passed = false; \
+		selftest_results.failed++; \
+		pr_err("FAIL %s():%i " fmt, __func__, __LINE__, ##__VA_ARGS__); \
 	} else { \
-		pr_info("pass %s:%i\n", __FILE__, __LINE__); \
+		selftest_results.passed++; \
+		pr_debug("pass %s():%i\n", __func__, __LINE__); \
 	} \
 }
 
@@ -131,7 +137,6 @@ static void __init of_selftest_property_match_string(void)
 	struct device_node *np;
 	int rc;
 
-	pr_info("start\n");
 	np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a");
 	if (!np) {
 		pr_err("No testcase data in device tree\n");
@@ -154,6 +159,78 @@ static void __init of_selftest_property_match_string(void)
 	selftest(rc == -EILSEQ, "unterminated string; rc=%i", rc);
 }
 
+static void __init of_selftest_parse_interrupts(void)
+{
+	struct device_node *np;
+	struct of_phandle_args args;
+	int i, rc;
+
+	np = of_find_node_by_path("/testcase-data/interrupts/interrupts0");
+	if (!np) {
+		pr_err("missing testcase data\n");
+		return;
+	}
+
+	for (i = 0; i < 4; i++) {
+		bool passed = true;
+		args.args_count = 0;
+		rc = of_irq_parse_one(np, i, &args);
+
+		passed &= !rc;
+		passed &= (args.args_count == 1);
+		passed &= (args.args[0] == (i + 1));
+
+		selftest(passed, "index %i - data error on node %s rc=%i\n",
+			 i, args.np->full_name, rc);
+	}
+	of_node_put(np);
+
+	np = of_find_node_by_path("/testcase-data/interrupts/interrupts1");
+	if (!np) {
+		pr_err("missing testcase data\n");
+		return;
+	}
+
+	for (i = 0; i < 4; i++) {
+		bool passed = true;
+		args.args_count = 0;
+		rc = of_irq_parse_one(np, i, &args);
+
+		/* Test the values from tests-phandle.dtsi */
+		switch (i) {
+		case 0:
+			passed &= !rc;
+			passed &= (args.args_count == 1);
+			passed &= (args.args[0] == 9);
+			break;
+		case 1:
+			passed &= !rc;
+			passed &= (args.args_count == 3);
+			passed &= (args.args[0] == 10);
+			passed &= (args.args[1] == 11);
+			passed &= (args.args[2] == 12);
+			break;
+		case 2:
+			passed &= !rc;
+			passed &= (args.args_count == 2);
+			passed &= (args.args[0] == 13);
+			passed &= (args.args[1] == 14);
+			break;
+		case 3:
+			passed &= !rc;
+			passed &= (args.args_count == 2);
+			passed &= (args.args[0] == 15);
+			passed &= (args.args[1] == 16);
+			break;
+		default:
+			passed = false;
+		}
+		selftest(passed, "index %i - data error on node %s rc=%i\n",
+			 i, args.np->full_name, rc);
+	}
+	of_node_put(np);
+}
+
 static int __init of_selftest(void)
 {
 	struct device_node *np;
@@ -168,7 +245,9 @@ static int __init of_selftest(void)
 	pr_info("start of selftest - you will see error messages\n");
 	of_selftest_parse_phandle_with_args();
 	of_selftest_property_match_string();
-	pr_info("end of selftest - %s\n", selftest_passed ? "PASS" : "FAIL");
+	of_selftest_parse_interrupts();
+	pr_info("end of selftest - %i passed, %i failed\n",
+		selftest_results.passed, selftest_results.failed);
 	return 0;
 }
 late_initcall(of_selftest);
-- 
cgit v1.2.3


From f7578496a671a96e501f16a5104893275e32c33a Mon Sep 17 00:00:00 2001
From: Thierry Reding
Date: Wed, 18 Sep 2013 15:24:44 +0200
Subject: of/irq: Use irq_of_parse_and_map()

Replace some instances of of_irq_map_one()/irq_create_of_mapping() and
of_irq_to_resource() by the simpler equivalent irq_of_parse_and_map().

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
[grant.likely: resolved conflicts with core code renames]
Signed-off-by: Grant Likely <grant.likely@linaro.org>
---
 arch/arm/mach-u300/timer.c                       |  9 ++++-----
 arch/powerpc/platforms/cell/celleb_scc_pciex.c   |  5 ++---
 arch/powerpc/platforms/cell/spider-pic.c         |  6 +++---
 arch/powerpc/sysdev/fsl_gtm.c                    |  9 ++++-----
 arch/powerpc/sysdev/mpic_msgr.c                  |  6 ++----
 drivers/crypto/caam/ctrl.c                       |  2 +-
 drivers/crypto/caam/jr.c                         |  2 +-
 drivers/crypto/omap-sham.c                       |  2 +-
 drivers/i2c/busses/i2c-cpm.c                     |  2 +-
 drivers/input/serio/xilinx_ps2.c                 |  7 ++++---
 drivers/net/ethernet/arc/emac_main.c             | 10 +++++-----
 drivers/net/ethernet/freescale/fs_enet/mac-fcc.c |  2 +-
 drivers/net/ethernet/freescale/fs_enet/mac-fec.c |  2 +-
 drivers/net/ethernet/freescale/fs_enet/mac-scc.c |  2 +-
 drivers/spi/spi-fsl-espi.c                       |  6 +++---
 drivers/tty/serial/cpm_uart/cpm_uart_core.c      |  2 +-
 16 files changed, 35 insertions(+), 39 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index b5db207dfd1e..9a5f9fb352ce 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -358,8 +358,7 @@ static struct delay_timer u300_delay_timer;
  */
 static void __init u300_timer_init_of(struct device_node *np)
 {
-	struct resource irq_res;
-	int irq;
+	unsigned int irq;
 	struct clk *clk;
 	unsigned long rate;
 
@@ -368,11 +367,11 @@ static void __init u300_timer_init_of(struct device_node *np)
 		panic("could not ioremap system timer\n");
 
 	/* Get the IRQ for the GP1 timer */
-	irq = of_irq_to_resource(np, 2, &irq_res);
-	if (irq <= 0)
+	irq = irq_of_parse_and_map(np, 2);
+	if (!irq)
 		panic("no IRQ for system timer\n");
 
-	pr_info("U300 GP1 timer @ base: %p, IRQ: %d\n", u300_timer_base, irq);
+	pr_info("U300 GP1 timer @ base: %p, IRQ: %u\n", u300_timer_base, irq);
 
 	/* Clock the interrupt controller */
 	clk = of_clk_get(np, 0);
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index b3ea96db5b06..4278acfa2ede 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -486,7 +486,6 @@ static __init int celleb_setup_pciex(struct device_node *node,
 				     struct pci_controller *phb)
 {
 	struct resource	r;
-	struct of_phandle_args oirq;
 	int virq;
 
 	/* SMMIO registers; used inside this file */
@@ -507,11 +506,11 @@ static __init int celleb_setup_pciex(struct device_node *node,
 	phb->ops = &scc_pciex_pci_ops;
 
 	/* internal interrupt handler */
-	if (of_irq_parse_one(node, 1, &oirq)) {
+	virq = irq_of_parse_and_map(node, 1);
+	if (!virq) {
 		pr_err("PCIEXC:Failed to map irq\n");
 		goto error;
 	}
-	virq = irq_create_of_mapping(&oirq);
 	if (request_irq(virq, pciex_handle_internal_irq,
 			0, "pciex", (void *)phb)) {
 		pr_err("PCIEXC:Failed to request irq\n");
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index d20680446174..1f72f4ab6353 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -235,9 +235,9 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
 	/* First, we check whether we have a real "interrupts" in the device
 	 * tree in case the device-tree is ever fixed
 	 */
-	struct of_phandle_args oirq;
-	if (of_irq_parse_one(pic->host->of_node, 0, &oirq) == 0)
-		return irq_create_of_mapping(&oirq);
+	virq = irq_of_parse_and_map(pic->host->of_node, 0);
+	if (virq)
+		return virq;
 
 	/* Now do the horrible hacks */
 	tmp = of_get_property(pic->host->of_node, "#interrupt-cells", NULL);
diff --git a/arch/powerpc/sysdev/fsl_gtm.c b/arch/powerpc/sysdev/fsl_gtm.c
index 0eb871cc3437..dd0d5be6cd1f 100644
--- a/arch/powerpc/sysdev/fsl_gtm.c
+++ b/arch/powerpc/sysdev/fsl_gtm.c
@@ -401,16 +401,15 @@ static int __init fsl_gtm_init(void)
 		gtm->clock = *clock;
 
 		for (i = 0; i < ARRAY_SIZE(gtm->timers); i++) {
-			int ret;
-			struct resource irq;
+			unsigned int irq;
 
-			ret = of_irq_to_resource(np, i, &irq);
-			if (ret == NO_IRQ) {
+			irq = irq_of_parse_and_map(np, i);
+			if (irq == NO_IRQ) {
 				pr_err("%s: not enough interrupts specified\n",
 				       np->full_name);
 				goto err;
 			}
-			gtm->timers[i].irq = irq.start;
+			gtm->timers[i].irq = irq;
 			gtm->timers[i].gtm = gtm;
 		}
 
diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c
index c75325865a85..2c9b52aa266c 100644
--- a/arch/powerpc/sysdev/mpic_msgr.c
+++ b/arch/powerpc/sysdev/mpic_msgr.c
@@ -237,15 +237,13 @@ static int mpic_msgr_probe(struct platform_device *dev)
 		raw_spin_lock_init(&msgr->lock);
 
 		if (receive_mask & (1 << i)) {
-			struct resource irq;
-
-			if (of_irq_to_resource(np, irq_index, &irq) == NO_IRQ) {
+			msgr->irq = irq_of_parse_and_map(np, irq_index);
+			if (msgr->irq == NO_IRQ) {
 				dev_err(&dev->dev,
 						"Missing interrupt specifier");
 				kfree(msgr);
 				return -EFAULT;
 			}
-			msgr->irq = irq.start;
 			irq_index += 1;
 		} else {
 			msgr->irq = NO_IRQ;
diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c
index b010d42a1803..ae6e5542ec46 100644
--- a/drivers/crypto/caam/ctrl.c
+++ b/drivers/crypto/caam/ctrl.c
@@ -224,7 +224,7 @@ static int caam_probe(struct platform_device *pdev)
 	topregs = (struct caam_full __iomem *)ctrl;
 
 	/* Get the IRQ of the controller (for security violations only) */
-	ctrlpriv->secvio_irq = of_irq_to_resource(nprop, 0, NULL);
+	ctrlpriv->secvio_irq = irq_of_parse_and_map(nprop, 0);
 
 	/*
 	 * Enable DECO watchdogs and, if this is a PHYS_ADDR_T_64BIT kernel,
diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c
index 105ba4da6180..517a16d87e4b 100644
--- a/drivers/crypto/caam/jr.c
+++ b/drivers/crypto/caam/jr.c
@@ -403,7 +403,7 @@ int caam_jr_probe(struct platform_device *pdev, struct device_node *np,
 		dma_set_mask(jrdev, DMA_BIT_MASK(32));
 
 	/* Identify the interrupt */
-	jrpriv->irq = of_irq_to_resource(np, 0, NULL);
+	jrpriv->irq = irq_of_parse_and_map(np, 0);
 
 	/* Now do the platform independent part */
 	error = caam_jr_init(jrdev); /* now turn on hardware */
diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index 8bdde57f6bb1..e28104b4aab0 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -1818,7 +1818,7 @@ static int omap_sham_get_res_of(struct omap_sham_dev *dd,
 		goto err;
 	}
 
-	dd->irq = of_irq_to_resource(node, 0, NULL);
+	dd->irq = irq_of_parse_and_map(node, 0);
 	if (!dd->irq) {
 		dev_err(dev, "can't translate OF irq value\n");
 		err = -EINVAL;
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index b2b8aa9adc0e..3e5ea2c87a6e 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -447,7 +447,7 @@ static int cpm_i2c_setup(struct cpm_i2c *cpm)
 
 	init_waitqueue_head(&cpm->i2c_wait);
 
-	cpm->irq = of_irq_to_resource(ofdev->dev.of_node, 0, NULL);
+	cpm->irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
 	if (!cpm->irq)
 		return -EINVAL;
 
diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c
index 4b7662a17ae9..36f7b9533397 100644
--- a/drivers/input/serio/xilinx_ps2.c
+++ b/drivers/input/serio/xilinx_ps2.c
@@ -235,12 +235,12 @@ static void sxps2_close(struct serio *pserio)
  */
 static int xps2_of_probe(struct platform_device *ofdev)
 {
-	struct resource r_irq; /* Interrupt resources */
 	struct resource r_mem; /* IO mem resources */
 	struct xps2data *drvdata;
 	struct serio *serio;
 	struct device *dev = &ofdev->dev;
 	resource_size_t remap_size, phys_addr;
+	unsigned int irq;
 	int error;
 
 	dev_info(dev, "Device Tree Probing \'%s\'\n",
@@ -254,7 +254,8 @@ static int xps2_of_probe(struct platform_device *ofdev)
 	}
 
 	/* Get IRQ for the device */
-	if (!of_irq_to_resource(ofdev->dev.of_node, 0, &r_irq)) {
+	irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
+	if (!irq) {
 		dev_err(dev, "no IRQ found\n");
 		return -ENODEV;
 	}
@@ -267,7 +268,7 @@ static int xps2_of_probe(struct platform_device *ofdev)
 	}
 
 	spin_lock_init(&drvdata->lock);
-	drvdata->irq = r_irq.start;
+	drvdata->irq = irq;
 	drvdata->serio = serio;
 	drvdata->dev = dev;
 
diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c
index 9e1601487263..d0878526c0c8 100644
--- a/drivers/net/ethernet/arc/emac_main.c
+++ b/drivers/net/ethernet/arc/emac_main.c
@@ -628,12 +628,12 @@ static const struct net_device_ops arc_emac_netdev_ops = {
 
 static int arc_emac_probe(struct platform_device *pdev)
 {
-	struct resource res_regs, res_irq;
+	struct resource res_regs;
 	struct device_node *phy_node;
 	struct arc_emac_priv *priv;
 	struct net_device *ndev;
 	const char *mac_addr;
-	unsigned int id, clock_frequency;
+	unsigned int id, clock_frequency, irq;
 	int err;
 
 	if (!pdev->dev.of_node)
@@ -661,8 +661,8 @@ static int arc_emac_probe(struct platform_device *pdev)
 	}
 
 	/* Get IRQ from device tree */
-	err = of_irq_to_resource(pdev->dev.of_node, 0, &res_irq);
-	if (!err) {
+	irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	if (!irq) {
 		dev_err(&pdev->dev, "failed to retrieve <irq> value from device tree\n");
 		return -ENODEV;
 	}
@@ -711,7 +711,7 @@ static int arc_emac_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	ndev->irq = res_irq.start;
+	ndev->irq = irq;
 	dev_info(&pdev->dev, "IRQ is %d\n", ndev->irq);
 
 	/* Register interrupt handler for device */
diff --git a/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c b/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c
index 7583a9572bcc..10f781d8cb09 100644
--- a/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c
+++ b/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c
@@ -88,7 +88,7 @@ static int do_pd_setup(struct fs_enet_private *fep)
 	struct fs_platform_info *fpi = fep->fpi;
 	int ret = -EINVAL;
 
-	fep->interrupt = of_irq_to_resource(ofdev->dev.of_node, 0, NULL);
+	fep->interrupt = irq_of_parse_and_map(ofdev->dev.of_node, 0);
 	if (fep->interrupt == NO_IRQ)
 		goto out;
 
diff --git a/drivers/net/ethernet/freescale/fs_enet/mac-fec.c b/drivers/net/ethernet/freescale/fs_enet/mac-fec.c
index 9ae6cdbcac2e..53a0c23b4890 100644
--- a/drivers/net/ethernet/freescale/fs_enet/mac-fec.c
+++ b/drivers/net/ethernet/freescale/fs_enet/mac-fec.c
@@ -98,7 +98,7 @@ static int do_pd_setup(struct fs_enet_private *fep)
 {
 	struct platform_device *ofdev = to_platform_device(fep->dev);
 
-	fep->interrupt = of_irq_to_resource(ofdev->dev.of_node, 0, NULL);
+	fep->interrupt = irq_of_parse_and_map(ofdev->dev.of_node, 0);
 	if (fep->interrupt == NO_IRQ)
 		return -EINVAL;
 
diff --git a/drivers/net/ethernet/freescale/fs_enet/mac-scc.c b/drivers/net/ethernet/freescale/fs_enet/mac-scc.c
index 22a02a767069..631f09872fa2 100644
--- a/drivers/net/ethernet/freescale/fs_enet/mac-scc.c
+++ b/drivers/net/ethernet/freescale/fs_enet/mac-scc.c
@@ -98,7 +98,7 @@ static int do_pd_setup(struct fs_enet_private *fep)
 {
 	struct platform_device *ofdev = to_platform_device(fep->dev);
 
-	fep->interrupt = of_irq_to_resource(ofdev->dev.of_node, 0, NULL);
+	fep->interrupt = irq_of_parse_and_map(ofdev->dev.of_node, 0);
 	if (fep->interrupt == NO_IRQ)
 		return -EINVAL;
 
diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
index b8f1103fe28e..3197d55f30cd 100644
--- a/drivers/spi/spi-fsl-espi.c
+++ b/drivers/spi/spi-fsl-espi.c
@@ -687,7 +687,7 @@ static int of_fsl_espi_probe(struct platform_device *ofdev)
 	struct device_node *np = ofdev->dev.of_node;
 	struct spi_master *master;
 	struct resource mem;
-	struct resource irq;
+	unsigned int irq;
 	int ret = -ENOMEM;
 
 	ret = of_mpc8xxx_spi_probe(ofdev);
@@ -702,13 +702,13 @@ static int of_fsl_espi_probe(struct platform_device *ofdev)
 	if (ret)
 		goto err;
 
-	ret = of_irq_to_resource(np, 0, &irq);
+	irq = irq_of_parse_and_map(np, 0);
 	if (!ret) {
 		ret = -EINVAL;
 		goto err;
 	}
 
-	master = fsl_espi_probe(dev, &mem, irq.start);
+	master = fsl_espi_probe(dev, &mem, irq);
 	if (IS_ERR(master)) {
 		ret = PTR_ERR(master);
 		goto err;
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 1a535f70dc41..6957f445a114 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1207,7 +1207,7 @@ static int cpm_uart_init_port(struct device_node *np,
 	pinfo->port.fifosize = pinfo->tx_nrfifos * pinfo->tx_fifosize;
 	spin_lock_init(&pinfo->port.lock);
 
-	pinfo->port.irq = of_irq_to_resource(np, 0, NULL);
+	pinfo->port.irq = irq_of_parse_and_map(np, 0);
 	if (pinfo->port.irq == NO_IRQ) {
 		ret = -EINVAL;
 		goto out_pram;
-- 
cgit v1.2.3


From 16b84e5a505c790538e534ad8dfda9c288691e40 Mon Sep 17 00:00:00 2001
From: Grant Likely
Date: Thu, 19 Sep 2013 16:44:55 -0500
Subject: of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code.

Several architectures open code effectively the same code block for
finding and mapping PCI irqs. This patch consolidates it down to a
single function.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Michal Simek <monstr@monstr.eu>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/arm/mach-integrator/pci_v3.c | 17 +----------------
 arch/mips/pci/fixup-lantiq.c      | 12 +-----------
 arch/mips/pci/pci-rt3883.c        | 22 +---------------------
 arch/x86/kernel/devicetree.c      |  7 +------
 drivers/of/of_pci_irq.c           | 25 +++++++++++++++++++++++++
 drivers/pci/host/pci-mvebu.c      | 14 +-------------
 include/linux/of_pci.h            |  1 +
 7 files changed, 31 insertions(+), 67 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index bb3aeb31a54e..a87e510fe0c4 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -835,21 +835,6 @@ static struct hw_pci pci_v3 __initdata = {
 
 #ifdef CONFIG_OF
 
-static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	struct of_phandle_args oirq;
-	int ret;
-
-	ret = of_irq_parse_pci(dev, &oirq);
-	if (ret) {
-		dev_err(&dev->dev, "of_irq_parse_pci() %d\n", ret);
-		/* Proper return code 0 == NO_IRQ */
-		return 0;
-	}
-
-	return irq_create_of_mapping(&oirq);
-}
-
 static int __init pci_v3_dtprobe(struct platform_device *pdev,
 				struct device_node *np)
 {
@@ -918,7 +903,7 @@ static int __init pci_v3_dtprobe(struct platform_device *pdev,
 		return -EINVAL;
 	}
 
-	pci_v3.map_irq = pci_v3_map_irq_dt;
+	pci_v3.map_irq = of_irq_parse_and_map_pci;
 	pci_common_init_dev(&pdev->dev, &pci_v3);
 
 	return 0;
diff --git a/arch/mips/pci/fixup-lantiq.c b/arch/mips/pci/fixup-lantiq.c
index aef60e75003e..c2ce41ea61d7 100644
--- a/arch/mips/pci/fixup-lantiq.c
+++ b/arch/mips/pci/fixup-lantiq.c
@@ -25,15 +25,5 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 
 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	struct of_phandle_args dev_irq;
-	int irq;
-
-	if (of_irq_parse_pci(dev, &dev_irq)) {
-		dev_err(&dev->dev, "trying to map irq for unknown slot:%d pin:%d\n",
-			slot, pin);
-		return 0;
-	}
-	irq = irq_create_of_mapping(&dev_irq);
-	dev_info(&dev->dev, "SLOT:%d PIN:%d IRQ:%d\n", slot, pin, irq);
-	return irq;
+	return of_irq_parse_and_map_pci(dev, slot, pin);
 }
diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
index eadc4310cd36..adeff2bfe4cd 100644
--- a/arch/mips/pci/pci-rt3883.c
+++ b/arch/mips/pci/pci-rt3883.c
@@ -583,27 +583,7 @@ err_put_intc_node:
 
 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	struct of_phandle_args dev_irq;
-	int err;
-	int irq;
-
-	err = of_irq_parse_pci(dev, &dev_irq);
-	if (err) {
-		pr_err("pci %s: unable to get irq map, err=%d\n",
-		       pci_name((struct pci_dev *) dev), err);
-		return 0;
-	}
-
-	irq = irq_create_of_mapping(&dev_irq);
-
-	if (irq == 0)
-		pr_crit("pci %s: no irq found for pin %u\n",
-			pci_name((struct pci_dev *) dev), pin);
-	else
-		pr_info("pci %s: using irq %d for pin %u\n",
-			pci_name((struct pci_dev *) dev), irq, pin);
-
-	return irq;
+	return of_irq_parse_and_map_pci(dev, slot, pin);
 }
 
 int pcibios_plat_dev_init(struct pci_dev *dev)
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index d39948f654a0..69c826a3d07e 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -105,7 +105,6 @@ struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
 
 static int x86_of_pci_irq_enable(struct pci_dev *dev)
 {
-	struct of_phandle_args oirq;
 	u32 virq;
 	int ret;
 	u8 pin;
@@ -116,11 +115,7 @@ static int x86_of_pci_irq_enable(struct pci_dev *dev)
 	if (!pin)
 		return 0;
 
-	ret = of_irq_parse_pci(dev, &oirq);
-	if (ret)
-		return ret;
-
-	virq = irq_create_of_mapping(&oirq);
+	virq = of_irq_parse_and_map_pci(dev, 0, 0);
 	if (virq == 0)
 		return -EINVAL;
 	dev->irq = virq;
diff --git a/drivers/of/of_pci_irq.c b/drivers/of/of_pci_irq.c
index 303afebc247a..8e92acd8253f 100644
--- a/drivers/of/of_pci_irq.c
+++ b/drivers/of/of_pci_irq.c
@@ -94,3 +94,28 @@ int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq
 	return of_irq_parse_raw(laddr, out_irq);
 }
 EXPORT_SYMBOL_GPL(of_irq_parse_pci);
+
+/**
+ * of_irq_parse_and_map_pci() - Decode a PCI irq from the device tree and map to a virq
+ * @dev: The pci device needing an irq
+ * @slot: PCI slot number; passed when used as map_irq callback. Unused
+ * @pin: PCI irq pin number; passed when used as map_irq callback. Unused
+ *
+ * @slot and @pin are unused, but included in the function so that this
+ * function can be used directly as the map_irq callback to pci_fixup_irqs().
+ */
+int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct of_phandle_args oirq;
+	int ret;
+
+	ret = of_irq_parse_pci(dev, &oirq);
+	if (ret) {
+		dev_err(&dev->dev, "of_irq_parse_pci() failed with rc=%d\n", ret);
+		return 0; /* Proper return code 0 == NO_IRQ */
+	}
+
+	return irq_create_of_mapping(&oirq);
+}
+EXPORT_SYMBOL_GPL(of_irq_parse_and_map_pci);
+
diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index 3a8d01ec50f7..07ddb3a13c6e 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -645,18 +645,6 @@ static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
-static int __init mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	struct of_phandle_args oirq;
-	int ret;
-
-	ret = of_irq_parse_pci(dev, &oirq);
-	if (ret)
-		return ret;
-
-	return irq_create_of_mapping(&oirq);
-}
-
 static struct pci_bus *mvebu_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	struct mvebu_pcie *pcie = sys_to_pcie(sys);
@@ -705,7 +693,7 @@ static void __init mvebu_pcie_enable(struct mvebu_pcie *pcie)
 	hw.private_data   = (void **)&pcie;
 	hw.setup          = mvebu_pcie_setup;
 	hw.scan           = mvebu_pcie_scan_bus;
-	hw.map_irq        = mvebu_pcie_map_irq;
+	hw.map_irq        = of_irq_parse_and_map_pci;
 	hw.ops            = &mvebu_pcie_ops;
 	hw.align_resource = mvebu_pcie_align_resource;
 
diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
index f297237349e8..1a1f5ffd5288 100644
--- a/include/linux/of_pci.h
+++ b/include/linux/of_pci.h
@@ -7,6 +7,7 @@
 struct pci_dev;
 struct of_phandle_args;
 int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq);
+int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin);
 
 struct device_node;
 struct device_node *of_pci_find_child_device(struct device_node *parent,
-- 
cgit v1.2.3


From f27446c3ad5b6d3b5b28ec0176e23d3ceca595d8 Mon Sep 17 00:00:00 2001
From: Grant Likely
Date: Thu, 19 Sep 2013 23:34:26 -0500
Subject: microblaze/pci: Drop PowerPC-ism from irq parsing

The Microblaze PCI code copied the PowerPC irq handling, but powerpc
needs to handle broken device trees that are not present on Microblaze.
This patch removes the powerpc special case and replaces it with a
direct of_irq_parse_and_map_pci() call.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/pci.h |  2 --
 arch/microblaze/pci/pci-common.c  | 71 +--------------------------------------
 2 files changed, 1 insertion(+), 72 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index d52abb6812fa..935f9bec414a 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -127,8 +127,6 @@ extern void of_scan_pci_bridge(struct device_node *node,
 extern void of_scan_bus(struct device_node *node, struct pci_bus *bus);
 extern void of_rescan_bus(struct device_node *node, struct pci_bus *bus);
 
-extern int pci_read_irq_line(struct pci_dev *dev);
-
 extern int pci_bus_find_capability(struct pci_bus *bus,
 						unsigned int devfn, int cap);
 
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 60b386c72c57..5060fc554aab 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -192,75 +192,6 @@ void pcibios_set_master(struct pci_dev *dev)
 	/* No special bus mastering setup handling */
 }
 
-/*
- * Reads the interrupt pin to determine if interrupt is use by card.
- * If the interrupt is used, then gets the interrupt line from the
- * openfirmware and sets it in the pci_dev and pci_config line.
- */
-int pci_read_irq_line(struct pci_dev *pci_dev)
-{
-	struct of_phandle_args oirq;
-	unsigned int virq;
-
-	/* The current device-tree that iSeries generates from the HV
-	 * PCI informations doesn't contain proper interrupt routing,
-	 * and all the fallback would do is print out crap, so we
-	 * don't attempt to resolve the interrupts here at all, some
-	 * iSeries specific fixup does it.
-	 *
-	 * In the long run, we will hopefully fix the generated device-tree
-	 * instead.
-	 */
-	pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev));
-
-#ifdef DEBUG
-	memset(&oirq, 0xff, sizeof(oirq));
-#endif
-	/* Try to get a mapping from the device-tree */
-	if (of_irq_parse_pci(pci_dev, &oirq)) {
-		u8 line, pin;
-
-		/* If that fails, lets fallback to what is in the config
-		 * space and map that through the default controller. We
-		 * also set the type to level low since that's what PCI
-		 * interrupts are. If your platform does differently, then
-		 * either provide a proper interrupt tree or don't use this
-		 * function.
-		 */
-		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
-			return -1;
-		if (pin == 0)
-			return -1;
-		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
-		    line == 0xff || line == 0) {
-			return -1;
-		}
-		pr_debug(" No map ! Using line %d (pin %d) from PCI config\n",
-			 line, pin);
-
-		virq = irq_create_mapping(NULL, line);
-		if (virq)
-			irq_set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
-	} else {
-		pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
-			 oirq.args_count, oirq.args[0], oirq.args[1],
-			 of_node_full_name(oirq.np));
-
-		virq = irq_create_of_mapping(&oirq);
-	}
-	if (!virq) {
-		pr_debug(" Failed to map !\n");
-		return -1;
-	}
-
-	pr_debug(" Mapped to linux irq %d\n", virq);
-
-	pci_dev->irq = virq;
-
-	return 0;
-}
-EXPORT_SYMBOL(pci_read_irq_line);
-
 /*
  * Platform support for /proc/bus/pci/X/Y mmap()s,
  * modelled on the sparc64 implementation by Dave Miller.
@@ -959,7 +890,7 @@ void pcibios_setup_bus_devices(struct pci_bus *bus)
 		dev->dev.archdata.dma_data = (void *)PCI_DRAM_OFFSET;
 
 		/* Read default IRQs and fixup if necessary */
-		pci_read_irq_line(dev);
+		dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
 	}
 }
 
-- 
cgit v1.2.3


From a861389a9f074d82081d0c7fbf30280a232c90d0 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen
Date: Wed, 9 Oct 2013 16:12:37 +0300
Subject: ARM: OMAP4: use CLK_SET_RATE_PARENT for dss_dss_clk

Set CLK_SET_RATE_PARENT flag for dss_dss_clk so that the DSS's fclk can
be configured without the need to get the parent of the fclk.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/cclock44xx_data.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
index 1d5b5290d2af..a27a0af669ab 100644
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@@ -830,7 +830,8 @@ DEFINE_CLK_GATE(dss_tv_clk, "extalt_clkin_ck", &extalt_clkin_ck, 0x0,
 		OMAP4430_CM_DSS_DSS_CLKCTRL,
 		OMAP4430_OPTFCLKEN_TV_CLK_SHIFT, 0x0, NULL);
 
-DEFINE_CLK_GATE(dss_dss_clk, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck, 0x0,
+DEFINE_CLK_GATE(dss_dss_clk, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck,
+		CLK_SET_RATE_PARENT,
 		OMAP4430_CM_DSS_DSS_CLKCTRL, OMAP4430_OPTFCLKEN_DSSCLK_SHIFT,
 		0x0, NULL);
 
-- 
cgit v1.2.3


From 262c2c9d06585fb0ffc84da18e0f747836ce8baf Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen
Date: Wed, 9 Oct 2013 16:12:38 +0300
Subject: ARM: OMAP3: use CLK_SET_RATE_PARENT for dss clocks

Set CLK_SET_RATE_PARENT flag for dss1_alwon_fck_3430es2,
dss1_alwon_fck_3430es1 and dpll4_m4x2_ck so that the DSS's fclk can be
configured without the need to get the parent's parent of the fclk.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/cclock3xxx_data.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c
index 334b76745900..a51dd75a8eaa 100644
--- a/arch/arm/mach-omap2/cclock3xxx_data.c
+++ b/arch/arm/mach-omap2/cclock3xxx_data.c
@@ -869,7 +869,8 @@ static struct clk_hw_omap dpll4_m4x2_ck_hw = {
 	.clkdm_name	= "dpll4_clkdm",
 };
 
-DEFINE_STRUCT_CLK(dpll4_m4x2_ck, dpll4_m4x2_ck_parent_names, dpll4_m5x2_ck_ops);
+DEFINE_STRUCT_CLK_FLAGS(dpll4_m4x2_ck, dpll4_m4x2_ck_parent_names,
+		dpll4_m5x2_ck_ops, CLK_SET_RATE_PARENT);
 
 static struct clk dpll4_m4x2_ck_3630 = {
 	.name		= "dpll4_m4x2_ck",
@@ -877,6 +878,7 @@ static struct clk dpll4_m4x2_ck_3630 = {
 	.parent_names	= dpll4_m4x2_ck_parent_names,
 	.num_parents	= ARRAY_SIZE(dpll4_m4x2_ck_parent_names),
 	.ops		= &dpll4_m5x2_ck_3630_ops,
+	.flags		= CLK_SET_RATE_PARENT,
 };
 
 DEFINE_CLK_DIVIDER(dpll4_m6_ck, "dpll4_ck", &dpll4_ck, 0x0,
@@ -968,8 +970,9 @@ static struct clk_hw_omap dss1_alwon_fck_3430es1_hw = {
 	.clkdm_name	= "dss_clkdm",
 };
 
-DEFINE_STRUCT_CLK(dss1_alwon_fck_3430es1, dss1_alwon_fck_3430es1_parent_names,
-		  aes2_ick_ops);
+DEFINE_STRUCT_CLK_FLAGS(dss1_alwon_fck_3430es1,
+		dss1_alwon_fck_3430es1_parent_names, aes2_ick_ops,
+		CLK_SET_RATE_PARENT);
 
 static struct clk dss1_alwon_fck_3430es2;
 
@@ -983,8 +986,9 @@ static struct clk_hw_omap dss1_alwon_fck_3430es2_hw = {
 	.clkdm_name	= "dss_clkdm",
 };
 
-DEFINE_STRUCT_CLK(dss1_alwon_fck_3430es2, dss1_alwon_fck_3430es1_parent_names,
-		  aes2_ick_ops);
+DEFINE_STRUCT_CLK_FLAGS(dss1_alwon_fck_3430es2,
+		dss1_alwon_fck_3430es1_parent_names, aes2_ick_ops,
+		CLK_SET_RATE_PARENT);
 
 static struct clk dss2_alwon_fck;
 
-- 
cgit v1.2.3


From 4ff7e3b65c8e1d8062365296b738fd262cfc2e9c Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen
Date: Wed, 9 Oct 2013 16:12:39 +0300
Subject: ARM: OMAP3: fix dpll4_m3_ck and dpll4_m4_ck dividers

dpll4_m3_ck and dpll4_m4_ck have divider bit fields which are 6 bits
wide. However, only values from 1 to 32 are allowed. This means we have
to add a divider tables and list the dividers explicitly.

I believe the same issue is there for other dpll4_mx_ck clocks, but as
I'm not familiar with them, I didn't touch them.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/cclock3xxx_data.c | 44 +++++++++++++++++++++++++++++++----
 1 file changed, 40 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c
index a51dd75a8eaa..e94d63582126 100644
--- a/arch/arm/mach-omap2/cclock3xxx_data.c
+++ b/arch/arm/mach-omap2/cclock3xxx_data.c
@@ -381,6 +381,42 @@ static struct clk_hw_omap dpll4_ck_hw = {
 
 DEFINE_STRUCT_CLK(dpll4_ck, dpll3_ck_parent_names, dpll4_ck_ops);
 
+static const struct clk_div_table dpll4_mx_ck_div_table[] = {
+	{ .div = 1, .val = 1 },
+	{ .div = 2, .val = 2 },
+	{ .div = 3, .val = 3 },
+	{ .div = 4, .val = 4 },
+	{ .div = 5, .val = 5 },
+	{ .div = 6, .val = 6 },
+	{ .div = 7, .val = 7 },
+	{ .div = 8, .val = 8 },
+	{ .div = 9, .val = 9 },
+	{ .div = 10, .val = 10 },
+	{ .div = 11, .val = 11 },
+	{ .div = 12, .val = 12 },
+	{ .div = 13, .val = 13 },
+	{ .div = 14, .val = 14 },
+	{ .div = 15, .val = 15 },
+	{ .div = 16, .val = 16 },
+	{ .div = 17, .val = 17 },
+	{ .div = 18, .val = 18 },
+	{ .div = 19, .val = 19 },
+	{ .div = 20, .val = 20 },
+	{ .div = 21, .val = 21 },
+	{ .div = 22, .val = 22 },
+	{ .div = 23, .val = 23 },
+	{ .div = 24, .val = 24 },
+	{ .div = 25, .val = 25 },
+	{ .div = 26, .val = 26 },
+	{ .div = 27, .val = 27 },
+	{ .div = 28, .val = 28 },
+	{ .div = 29, .val = 29 },
+	{ .div = 30, .val = 30 },
+	{ .div = 31, .val = 31 },
+	{ .div = 32, .val = 32 },
+	{ .div = 0 },
+};
+
 DEFINE_CLK_DIVIDER(dpll4_m5_ck, "dpll4_ck", &dpll4_ck, 0x0,
 		   OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
 		   OMAP3430_CLKSEL_CAM_SHIFT, OMAP3630_CLKSEL_CAM_WIDTH,
@@ -524,10 +560,10 @@ static const struct clksel_rate clkout2_src_54m_rates[] = {
 	{ .div = 0 }
 };
 
-DEFINE_CLK_DIVIDER(dpll4_m3_ck, "dpll4_ck", &dpll4_ck, 0x0,
+DEFINE_CLK_DIVIDER_TABLE(dpll4_m3_ck, "dpll4_ck", &dpll4_ck, 0x0,
 		   OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
 		   OMAP3430_CLKSEL_TV_SHIFT, OMAP3630_CLKSEL_TV_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
+		   0, dpll4_mx_ck_div_table, NULL);
 
 static struct clk dpll4_m3x2_ck;
 
@@ -847,10 +883,10 @@ static struct clk dpll3_m3x2_ck_3630 = {
 
 DEFINE_CLK_FIXED_FACTOR(dpll3_x2_ck, "dpll3_ck", &dpll3_ck, 0x0, 2, 1);
 
-DEFINE_CLK_DIVIDER(dpll4_m4_ck, "dpll4_ck", &dpll4_ck, 0x0,
+DEFINE_CLK_DIVIDER_TABLE(dpll4_m4_ck, "dpll4_ck", &dpll4_ck, 0x0,
 		   OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
 		   OMAP3430_CLKSEL_DSS1_SHIFT, OMAP3630_CLKSEL_DSS1_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
+		   0, dpll4_mx_ck_div_table, NULL);
 
 static struct clk dpll4_m4x2_ck;
 
-- 
cgit v1.2.3


From 6d9153bbce50d41802ad2e20ce52daf699a3e8ad Mon Sep 17 00:00:00 2001
From: Lan Tianyu
Date: Thu, 24 Oct 2013 15:11:33 +0800
Subject: x86/reboot: Correct pr_info() log message in the
 set_bios/pci/kbd_reboot()

commit:

  c767a54ba065 x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level>

broke the log messages in the set_bios/pci/kbd_reboot() functions, by
putting the reboot method string and quirk entry's ident string in the
wrong order. This patch fixes it.

Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Cc: holt@sgi.com
Cc: davej@fedoraproject.org
Cc: lenb@kernel.org
Cc: rjw@rjwysocki.net
Cc: awilliam@redhat.com
Link: http://lkml.kernel.org/r/1382598693-29334-1-git-send-email-tianyu.lan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/reboot.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 76925208f50b..da1fe1c0590b 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -61,7 +61,7 @@ static int __init set_bios_reboot(const struct dmi_system_id *d)
 	if (reboot_type != BOOT_BIOS) {
 		reboot_type = BOOT_BIOS;
 		pr_info("%s series board detected. Selecting %s-method for reboots.\n",
-			"BIOS", d->ident);
+			d->ident, "BIOS");
 	}
 	return 0;
 }
@@ -117,7 +117,7 @@ static int __init set_pci_reboot(const struct dmi_system_id *d)
 	if (reboot_type != BOOT_CF9) {
 		reboot_type = BOOT_CF9;
 		pr_info("%s series board detected. Selecting %s-method for reboots.\n",
-			"PCI", d->ident);
+			d->ident, "PCI");
 	}
 	return 0;
 }
@@ -127,7 +127,7 @@ static int __init set_kbd_reboot(const struct dmi_system_id *d)
 	if (reboot_type != BOOT_KBD) {
 		reboot_type = BOOT_KBD;
 		pr_info("%s series board detected. Selecting %s-method for reboot.\n",
-			"KBD", d->ident);
+			d->ident, "KBD");
 	}
 	return 0;
 }
-- 
cgit v1.2.3


From 30dae2f98612d7c8cd855861b9de205ebd9ef4fa Mon Sep 17 00:00:00 2001
From: Sebastian Reichel
Date: Tue, 22 Oct 2013 11:02:56 -0700
Subject: leds: lp55xx: handle enable pin in driver

This patch moves the handling of the chip's enable pin from the board
code into the driver. It also updates all board-code files using the
driver to incorporate this change.

This is needed for device tree support of the enable pin.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
---
 .../devicetree/bindings/leds/leds-lp55xx.txt       |  1 +
 arch/arm/mach-omap2/board-rx51-peripherals.c       | 20 +----------------
 arch/arm/mach-ux500/board-mop500.c                 |  2 ++
 drivers/leds/leds-lp55xx-common.c                  | 25 +++++++++++-----------
 include/linux/platform_data/leds-lp55xx.h          |  6 ++----
 5 files changed, 19 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
index d221e75d90fa..c55b8c016a9e 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
@@ -10,6 +10,7 @@ Each child has own specific current settings
 - max-cur: Maximun current at each led channel.
 
 Optional properties:
+- enable-gpio: GPIO attached to the chip's enable pin
 - label: Used for naming LEDs
 - pwr-sel: LP8501 specific property. Power selection for output channels.
          0: D1~9 are connected to VDD
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index f6fe388af989..68dc998fa34b 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -211,29 +211,11 @@ static struct lp55xx_led_config rx51_lp5523_led_config[] = {
 	}
 };
 
-static int rx51_lp5523_setup(void)
-{
-	return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT,
-			"lp5523_enable");
-}
-
-static void rx51_lp5523_release(void)
-{
-	gpio_free(RX51_LP5523_CHIP_EN_GPIO);
-}
-
-static void rx51_lp5523_enable(bool state)
-{
-	gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state);
-}
-
 static struct lp55xx_platform_data rx51_lp5523_platform_data = {
 	.led_config		= rx51_lp5523_led_config,
 	.num_channels		= ARRAY_SIZE(rx51_lp5523_led_config),
 	.clock_mode		= LP55XX_CLOCK_AUTO,
-	.setup_resources	= rx51_lp5523_setup,
-	.release_resources	= rx51_lp5523_release,
-	.enable			= rx51_lp5523_enable,
+	.enable_gpio		= RX51_LP5523_CHIP_EN_GPIO,
 };
 #endif
 
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index ad0806eff762..703dec2b7d8d 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -297,6 +297,7 @@ static struct lp55xx_platform_data __initdata lp5521_pri_data = {
        .led_config     = &lp5521_pri_led[0],
        .num_channels   = 3,
        .clock_mode     = LP55XX_CLOCK_EXT,
+       .enable_gpio    = -1,
 };
 
 static struct lp55xx_led_config lp5521_sec_led[] = {
@@ -322,6 +323,7 @@ static struct lp55xx_platform_data __initdata lp5521_sec_data = {
        .led_config     = &lp5521_sec_led[0],
        .num_channels   = 3,
        .clock_mode     = LP55XX_CLOCK_EXT,
+       .enable_gpio    = -1,
 };
 
 /* I2C0 devices only available on the first HREF/MOP500 */
diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c
index 075acf5b9fab..9acc6bb7deef 100644
--- a/drivers/leds/leds-lp55xx-common.c
+++ b/drivers/leds/leds-lp55xx-common.c
@@ -20,6 +20,8 @@
 #include <linux/module.h>
 #include <linux/platform_data/leds-lp55xx.h>
 #include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
 
 #include "leds-lp55xx-common.h"
 
@@ -407,18 +409,18 @@ int lp55xx_init_device(struct lp55xx_chip *chip)
 	if (!pdata || !cfg)
 		return -EINVAL;
 
-	if (pdata->setup_resources) {
-		ret = pdata->setup_resources();
+	if (gpio_is_valid(pdata->enable_gpio)) {
+		ret = devm_gpio_request_one(dev, pdata->enable_gpio,
+					    GPIOF_DIR_OUT, "lp5523_enable");
 		if (ret < 0) {
-			dev_err(dev, "setup resoure err: %d\n", ret);
+			dev_err(dev, "could not acquire enable gpio (err=%d)\n",
+				ret);
 			goto err;
 		}
-	}
 
-	if (pdata->enable) {
-		pdata->enable(0);
+		gpio_set_value(pdata->enable_gpio, 0);
 		usleep_range(1000, 2000); /* Keep enable down at least 1ms */
-		pdata->enable(1);
+		gpio_set_value(pdata->enable_gpio, 1);
 		usleep_range(1000, 2000); /* 500us abs min. */
 	}
 
@@ -459,11 +461,8 @@ void lp55xx_deinit_device(struct lp55xx_chip *chip)
 	if (chip->clk)
 		clk_disable_unprepare(chip->clk);
 
-	if (pdata->enable)
-		pdata->enable(0);
-
-	if (pdata->release_resources)
-		pdata->release_resources();
+	if (gpio_is_valid(pdata->enable_gpio))
+		gpio_set_value(pdata->enable_gpio, 0);
 }
 EXPORT_SYMBOL_GPL(lp55xx_deinit_device);
 
@@ -596,6 +595,8 @@ int lp55xx_of_populate_pdata(struct device *dev, struct device_node *np)
 	of_property_read_string(np, "label", &pdata->label);
 	of_property_read_u8(np, "clock-mode", &pdata->clock_mode);
 
+	pdata->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);
+
 	/* LP8501 specific */
 	of_property_read_u8(np, "pwr-sel", (u8 *)&pdata->pwr_sel);
 
diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h
index c32de4dcec54..624ff9edad6f 100644
--- a/include/linux/platform_data/leds-lp55xx.h
+++ b/include/linux/platform_data/leds-lp55xx.h
@@ -67,10 +67,8 @@ struct lp55xx_platform_data {
 	/* Clock configuration */
 	u8 clock_mode;
 
-	/* Platform specific functions */
-	int (*setup_resources)(void);
-	void (*release_resources)(void);
-	void (*enable)(bool state);
+	/* optional enable GPIO */
+	int enable_gpio;
 
 	/* Predefined pattern data */
 	struct lp55xx_predef_pattern *patterns;
-- 
cgit v1.2.3


From 3df7b41aa5e7797f391d0a41f8b0dce1fe366a09 Mon Sep 17 00:00:00 2001
From: Jan Beulich
Date: Mon, 21 Oct 2013 09:43:57 +0100
Subject: x86: Unify copy_from_user() size checking

Commits 4a3127693001c61a21d1ce680db6340623f52e93 ("x86: Turn the
copy_from_user check into an (optional) compile time warning")
and 63312b6a6faae3f2e5577f2b001e3b504f10a2aa ("x86: Add a
Kconfig option to turn the copy_from_user warnings into errors")
touched only the 32-bit variant of copy_from_user(), whereas the
original commit 9f0cf4adb6aa0bfccf675c938124e68f7f06349d ("x86:
Use __builtin_object_size() to validate the buffer size for
copy_from_user()") also added the same code to the 64-bit one.

Further the earlier conversion from an inline WARN() to the call
to copy_from_user_overflow() went a little too far: When the
number of bytes to be copied is not a constant (e.g. [looking at
3.11] in drivers/net/tun.c:__tun_chr_ioctl() or
drivers/pci/pcie/aer/aer_inject.c:aer_inject_write()), the
compiler will always have to keep the funtion call, and hence
there will always be a warning. By using __builtin_constant_p()
we can avoid this.

And then this slightly extends the effect of
CONFIG_DEBUG_STRICT_USER_COPY_CHECKS in that apart from
converting warnings to errors in the constant size case, it
retains the (possibly wrong) warnings in the non-constant size
case, such that if someone is prepared to get a few false
positives, (s)he'll be able to recover the current behavior
(except that these diagnostics now will never be converted to
errors).

Since the 32-bit variant (intentionally) didn't call
might_fault(), the unification results in this being called
twice now. Adding a suitable #ifdef would be the alternative if
that's a problem.

I'd like to point out though that with
__compiletime_object_size() being restricted to gcc before 4.6,
the whole construct is going to become more and more pointless
going forward. I would question however that commit
2fb0815c9ee6b9ac50e15dd8360ec76d9fa46a2 ("gcc4: disable
__compiletime_object_size for GCC 4.6+") was really necessary,
and instead this should have been dealt with as is done here
from the beginning.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/5265056D02000078000FC4F3@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/include/asm/uaccess.h    | 68 +++++++++++++++++++++++++++++++++++++++
 arch/x86/include/asm/uaccess_32.h | 26 ---------------
 arch/x86/include/asm/uaccess_64.h | 18 -----------
 arch/x86/lib/usercopy_32.c        |  3 +-
 4 files changed, 69 insertions(+), 46 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 5838fa911aa0..c9799ed208a8 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -542,5 +542,73 @@ extern struct movsl_mask {
 # include <asm/uaccess_64.h>
 #endif
 
+unsigned long __must_check _copy_from_user(void *to, const void __user *from,
+					   unsigned n);
+
+#ifdef CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
+# define copy_user_diag __compiletime_error
+#else
+# define copy_user_diag __compiletime_warning
+#endif
+
+extern void copy_user_diag("copy_from_user() buffer size is too small")
+copy_from_user_overflow(void);
+
+#undef copy_user_diag
+
+#ifdef CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
+
+extern void
+__compiletime_warning("copy_from_user() buffer size is not provably correct")
+__copy_from_user_overflow(void) __asm__("copy_from_user_overflow");
+#define __copy_from_user_overflow(size, count) __copy_from_user_overflow()
+
+#else
+
+static inline void
+__copy_from_user_overflow(int size, unsigned long count)
+{
+	WARN(1, "Buffer overflow detected (%d < %lu)!\n", size, count);
+}
+
+#endif
+
+static inline unsigned long __must_check
+copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	int sz = __compiletime_object_size(to);
+
+	might_fault();
+
+	/*
+	 * While we would like to have the compiler do the checking for us
+	 * even in the non-constant size case, any false positives there are
+	 * a problem (especially when DEBUG_STRICT_USER_COPY_CHECKS, but even
+	 * without - the [hopefully] dangerous looking nature of the warning
+	 * would make people go look at the respecitive call sites over and
+	 * over again just to find that there's no problem).
+	 *
+	 * And there are cases where it's just not realistic for the compiler
+	 * to prove the count to be in range. For example when multiple call
+	 * sites of a helper function - perhaps in different source files -
+	 * all doing proper range checking, yet the helper function not doing
+	 * so again.
+	 *
+	 * Therefore limit the compile time checking to the constant size
+	 * case, and do only runtime checking for non-constant sizes.
+	 */
+
+	if (likely(sz < 0 || sz >= n))
+		n = _copy_from_user(to, from, n);
+	else if(__builtin_constant_p(n))
+		copy_from_user_overflow();
+	else
+		__copy_from_user_overflow(sz, n);
+
+	return n;
+}
+
+#undef __copy_from_user_overflow
+
 #endif /* _ASM_X86_UACCESS_H */
 
diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h
index 7f760a9f1f61..c348c87cefc8 100644
--- a/arch/x86/include/asm/uaccess_32.h
+++ b/arch/x86/include/asm/uaccess_32.h
@@ -186,31 +186,5 @@ __copy_from_user_inatomic_nocache(void *to, const void __user *from,
 
 unsigned long __must_check copy_to_user(void __user *to,
 					const void *from, unsigned long n);
-unsigned long __must_check _copy_from_user(void *to,
-					  const void __user *from,
-					  unsigned long n);
-
-
-extern void copy_from_user_overflow(void)
-#ifdef CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
-	__compiletime_error("copy_from_user() buffer size is not provably correct")
-#else
-	__compiletime_warning("copy_from_user() buffer size is not provably correct")
-#endif
-;
-
-static inline unsigned long __must_check copy_from_user(void *to,
-					  const void __user *from,
-					  unsigned long n)
-{
-	int sz = __compiletime_object_size(to);
-
-	if (likely(sz == -1 || sz >= n))
-		n = _copy_from_user(to, from, n);
-	else
-		copy_from_user_overflow();
-
-	return n;
-}
 
 #endif /* _ASM_X86_UACCESS_32_H */
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index 4f7923dd0007..4df93c46852b 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -48,26 +48,8 @@ copy_user_generic(void *to, const void *from, unsigned len)
 __must_check unsigned long
 _copy_to_user(void __user *to, const void *from, unsigned len);
 __must_check unsigned long
-_copy_from_user(void *to, const void __user *from, unsigned len);
-__must_check unsigned long
 copy_in_user(void __user *to, const void __user *from, unsigned len);
 
-static inline unsigned long __must_check copy_from_user(void *to,
-					  const void __user *from,
-					  unsigned long n)
-{
-	int sz = __compiletime_object_size(to);
-
-	might_fault();
-	if (likely(sz == -1 || sz >= n))
-		n = _copy_from_user(to, from, n);
-#ifdef CONFIG_DEBUG_VM
-	else
-		WARN(1, "Buffer overflow detected!\n");
-#endif
-	return n;
-}
-
 static __always_inline __must_check
 int copy_to_user(void __user *dst, const void *src, unsigned size)
 {
diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index 3eb18acd0e40..c408d0222917 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -679,8 +679,7 @@ EXPORT_SYMBOL(copy_to_user);
  * If some data could not be copied, this function will pad the copied
  * data to the requested size using zero bytes.
  */
-unsigned long
-_copy_from_user(void *to, const void __user *from, unsigned long n)
+unsigned long _copy_from_user(void *to, const void __user *from, unsigned n)
 {
 	if (access_ok(VERIFY_READ, from, n))
 		n = __copy_from_user(to, from, n);
-- 
cgit v1.2.3


From 7a3d9b0f3abbea957b829cdfff8169872c575642 Mon Sep 17 00:00:00 2001
From: Jan Beulich
Date: Mon, 21 Oct 2013 09:44:37 +0100
Subject: x86: Unify copy_to_user() and add size checking to it

Similarly to copy_from_user(), where the range check is to
protect against kernel memory corruption, copy_to_user() can
benefit from such checking too: Here it protects against kernel
information leaks.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: <arjan@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/5265059502000078000FC4F6@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
---
 arch/x86/include/asm/uaccess.h    | 30 ++++++++++++++++++++++++++++++
 arch/x86/include/asm/uaccess_32.h |  3 ---
 arch/x86/include/asm/uaccess_64.h | 10 ----------
 arch/x86/lib/usercopy_32.c        |  5 ++---
 4 files changed, 32 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index c9799ed208a8..8ec57c07b125 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -544,6 +544,8 @@ extern struct movsl_mask {
 
 unsigned long __must_check _copy_from_user(void *to, const void __user *from,
 					   unsigned n);
+unsigned long __must_check _copy_to_user(void __user *to, const void *from,
+					 unsigned n);
 
 #ifdef CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
 # define copy_user_diag __compiletime_error
@@ -553,6 +555,8 @@ unsigned long __must_check _copy_from_user(void *to, const void __user *from,
 
 extern void copy_user_diag("copy_from_user() buffer size is too small")
 copy_from_user_overflow(void);
+extern void copy_user_diag("copy_to_user() buffer size is too small")
+copy_to_user_overflow(void) __asm__("copy_from_user_overflow");
 
 #undef copy_user_diag
 
@@ -563,6 +567,11 @@ __compiletime_warning("copy_from_user() buffer size is not provably correct")
 __copy_from_user_overflow(void) __asm__("copy_from_user_overflow");
 #define __copy_from_user_overflow(size, count) __copy_from_user_overflow()
 
+extern void
+__compiletime_warning("copy_to_user() buffer size is not provably correct")
+__copy_to_user_overflow(void) __asm__("copy_from_user_overflow");
+#define __copy_to_user_overflow(size, count) __copy_to_user_overflow()
+
 #else
 
 static inline void
@@ -571,6 +580,8 @@ __copy_from_user_overflow(int size, unsigned long count)
 	WARN(1, "Buffer overflow detected (%d < %lu)!\n", size, count);
 }
 
+#define __copy_to_user_overflow __copy_from_user_overflow
+
 #endif
 
 static inline unsigned long __must_check
@@ -608,7 +619,26 @@ copy_from_user(void *to, const void __user *from, unsigned long n)
 	return n;
 }
 
+static inline unsigned long __must_check
+copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	int sz = __compiletime_object_size(from);
+
+	might_fault();
+
+	/* See the comment in copy_from_user() above. */
+	if (likely(sz < 0 || sz >= n))
+		n = _copy_to_user(to, from, n);
+	else if(__builtin_constant_p(n))
+		copy_to_user_overflow();
+	else
+		__copy_to_user_overflow(sz, n);
+
+	return n;
+}
+
 #undef __copy_from_user_overflow
+#undef __copy_to_user_overflow
 
 #endif /* _ASM_X86_UACCESS_H */
 
diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h
index c348c87cefc8..3c03a5de64d3 100644
--- a/arch/x86/include/asm/uaccess_32.h
+++ b/arch/x86/include/asm/uaccess_32.h
@@ -184,7 +184,4 @@ __copy_from_user_inatomic_nocache(void *to, const void __user *from,
        return __copy_from_user_ll_nocache_nozero(to, from, n);
 }
 
-unsigned long __must_check copy_to_user(void __user *to,
-					const void *from, unsigned long n);
-
 #endif /* _ASM_X86_UACCESS_32_H */
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index 4df93c46852b..0acae710fa00 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -45,19 +45,9 @@ copy_user_generic(void *to, const void *from, unsigned len)
 	return ret;
 }
 
-__must_check unsigned long
-_copy_to_user(void __user *to, const void *from, unsigned len);
 __must_check unsigned long
 copy_in_user(void __user *to, const void __user *from, unsigned len);
 
-static __always_inline __must_check
-int copy_to_user(void __user *dst, const void *src, unsigned size)
-{
-	might_fault();
-
-	return _copy_to_user(dst, src, size);
-}
-
 static __always_inline __must_check
 int __copy_from_user(void *dst, const void __user *src, unsigned size)
 {
diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index c408d0222917..e2f5e21c03b3 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -654,14 +654,13 @@ EXPORT_SYMBOL(__copy_from_user_ll_nocache_nozero);
  * Returns number of bytes that could not be copied.
  * On success, this will be zero.
  */
-unsigned long
-copy_to_user(void __user *to, const void *from, unsigned long n)
+unsigned long _copy_to_user(void __user *to, const void *from, unsigned n)
 {
 	if (access_ok(VERIFY_WRITE, to, n))
 		n = __copy_to_user(to, from, n);
 	return n;
 }
-EXPORT_SYMBOL(copy_to_user);
+EXPORT_SYMBOL(_copy_to_user);
 
 /**
  * copy_from_user: - Copy a block of data from user space.
-- 
cgit v1.2.3


From 09dc68d958c67c76cf672ec78b7391af453010f8 Mon Sep 17 00:00:00 2001
From: Jan Beulich
Date: Mon, 21 Oct 2013 09:35:20 +0100
Subject: x86/cpu: Track legacy CPU model data only on 32-bit kernels

struct cpu_dev's c_models is only ever set inside CONFIG_X86_32
conditionals (or code that's being built for 32-bit only), so
there's no use of reserving the (empty) space for the model
names in a 64-bit kernel.

Similarly, c_size_cache is only used in the #else of a
CONFIG_X86_64 conditional, so reserving space for (and in one
case even initializing) that field is pointless for 64-bit
kernels too.

While moving both fields to the end of the structure, I also
noticed that:

 - the c_models array size was one too small, potentially causing
   table_lookup_model() to return garbage on Intel CPUs (intel.c's
   instance was lacking the sentinel with family being zero), so the
   patch bumps that by one,

 - c_models' vendor sub-field was unused (and anyway redundant
   with the base structure's c_x86_vendor field), so the patch deletes it.

Also rename the legacy fields so that their legacy nature stands out
and comment their declarations.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/5265036802000078000FC4DB@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/cpu/amd.c     |  6 +++---
 arch/x86/kernel/cpu/centaur.c |  8 +++++---
 arch/x86/kernel/cpu/common.c  | 12 +++++++-----
 arch/x86/kernel/cpu/cpu.h     | 20 +++++++++++---------
 arch/x86/kernel/cpu/intel.c   | 12 ++++++------
 arch/x86/kernel/cpu/umc.c     |  4 ++--
 6 files changed, 34 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 903a264af981..3daece79a142 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -823,8 +823,8 @@ static const struct cpu_dev amd_cpu_dev = {
 	.c_vendor	= "AMD",
 	.c_ident	= { "AuthenticAMD" },
 #ifdef CONFIG_X86_32
-	.c_models = {
-		{ .vendor = X86_VENDOR_AMD, .family = 4, .model_names =
+	.legacy_models = {
+		{ .family = 4, .model_names =
 		  {
 			  [3] = "486 DX/2",
 			  [7] = "486 DX/2-WB",
@@ -835,7 +835,7 @@ static const struct cpu_dev amd_cpu_dev = {
 		  }
 		},
 	},
-	.c_size_cache	= amd_size_cache,
+	.legacy_cache_size = amd_size_cache,
 #endif
 	.c_early_init   = early_init_amd,
 	.c_detect_tlb	= cpu_detect_tlb_amd,
diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c
index fbf6c3bc2400..8d5652dc99dd 100644
--- a/arch/x86/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
@@ -468,10 +468,10 @@ static void init_centaur(struct cpuinfo_x86 *c)
 #endif
 }
 
+#ifdef CONFIG_X86_32
 static unsigned int
 centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size)
 {
-#ifdef CONFIG_X86_32
 	/* VIA C3 CPUs (670-68F) need further shifting. */
 	if ((c->x86 == 6) && ((c->x86_model == 7) || (c->x86_model == 8)))
 		size >>= 8;
@@ -484,16 +484,18 @@ centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size)
 	if ((c->x86 == 6) && (c->x86_model == 9) &&
 				(c->x86_mask == 1) && (size == 65))
 		size -= 1;
-#endif
 	return size;
 }
+#endif
 
 static const struct cpu_dev centaur_cpu_dev = {
 	.c_vendor	= "Centaur",
 	.c_ident	= { "CentaurHauls" },
 	.c_early_init	= early_init_centaur,
 	.c_init		= init_centaur,
-	.c_size_cache	= centaur_size_cache,
+#ifdef CONFIG_X86_32
+	.legacy_cache_size = centaur_size_cache,
+#endif
 	.c_x86_vendor	= X86_VENDOR_CENTAUR,
 };
 
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 2793d1f095a2..9ada0b37ae07 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -346,7 +346,8 @@ static void filter_cpuid_features(struct cpuinfo_x86 *c, bool warn)
 /* Look up CPU names by table lookup. */
 static const char *table_lookup_model(struct cpuinfo_x86 *c)
 {
-	const struct cpu_model_info *info;
+#ifdef CONFIG_X86_32
+	const struct legacy_cpu_model_info *info;
 
 	if (c->x86_model >= 16)
 		return NULL;	/* Range check */
@@ -354,13 +355,14 @@ static const char *table_lookup_model(struct cpuinfo_x86 *c)
 	if (!this_cpu)
 		return NULL;
 
-	info = this_cpu->c_models;
+	info = this_cpu->legacy_models;
 
-	while (info && info->family) {
+	while (info->family) {
 		if (info->family == c->x86)
 			return info->model_names[c->x86_model];
 		info++;
 	}
+#endif
 	return NULL;		/* Not found */
 }
 
@@ -450,8 +452,8 @@ void cpu_detect_cache_sizes(struct cpuinfo_x86 *c)
 	c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
 #else
 	/* do processor-specific cache resizing */
-	if (this_cpu->c_size_cache)
-		l2size = this_cpu->c_size_cache(c, l2size);
+	if (this_cpu->legacy_cache_size)
+		l2size = this_cpu->legacy_cache_size(c, l2size);
 
 	/* Allow user to override all this if necessary. */
 	if (cachesize_override != -1)
diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h
index 4041c24ae7db..c37dc37e8317 100644
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -1,12 +1,6 @@
 #ifndef ARCH_X86_CPU_H
 #define ARCH_X86_CPU_H
 
-struct cpu_model_info {
-	int		vendor;
-	int		family;
-	const char	*model_names[16];
-};
-
 /* attempt to consolidate cpu attributes */
 struct cpu_dev {
 	const char	*c_vendor;
@@ -14,15 +8,23 @@ struct cpu_dev {
 	/* some have two possibilities for cpuid string */
 	const char	*c_ident[2];
 
-	struct		cpu_model_info c_models[4];
-
 	void            (*c_early_init)(struct cpuinfo_x86 *);
 	void		(*c_bsp_init)(struct cpuinfo_x86 *);
 	void		(*c_init)(struct cpuinfo_x86 *);
 	void		(*c_identify)(struct cpuinfo_x86 *);
 	void		(*c_detect_tlb)(struct cpuinfo_x86 *);
-	unsigned int	(*c_size_cache)(struct cpuinfo_x86 *, unsigned int);
 	int		c_x86_vendor;
+#ifdef CONFIG_X86_32
+	/* Optional vendor specific routine to obtain the cache size. */
+	unsigned int	(*legacy_cache_size)(struct cpuinfo_x86 *,
+					     unsigned int);
+
+	/* Family/stepping-based lookup table for model names. */
+	struct legacy_cpu_model_info {
+		int		family;
+		const char	*model_names[16];
+	}		legacy_models[5];
+#endif
 };
 
 struct _tlb_table {
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index ec7299566f79..dc1ec0dff939 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -665,8 +665,8 @@ static const struct cpu_dev intel_cpu_dev = {
 	.c_vendor	= "Intel",
 	.c_ident	= { "GenuineIntel" },
 #ifdef CONFIG_X86_32
-	.c_models = {
-		{ .vendor = X86_VENDOR_INTEL, .family = 4, .model_names =
+	.legacy_models = {
+		{ .family = 4, .model_names =
 		  {
 			  [0] = "486 DX-25/33",
 			  [1] = "486 DX-50",
@@ -679,7 +679,7 @@ static const struct cpu_dev intel_cpu_dev = {
 			  [9] = "486 DX/4-WB"
 		  }
 		},
-		{ .vendor = X86_VENDOR_INTEL, .family = 5, .model_names =
+		{ .family = 5, .model_names =
 		  {
 			  [0] = "Pentium 60/66 A-step",
 			  [1] = "Pentium 60/66",
@@ -690,7 +690,7 @@ static const struct cpu_dev intel_cpu_dev = {
 			  [8] = "Mobile Pentium MMX"
 		  }
 		},
-		{ .vendor = X86_VENDOR_INTEL, .family = 6, .model_names =
+		{ .family = 6, .model_names =
 		  {
 			  [0] = "Pentium Pro A-step",
 			  [1] = "Pentium Pro",
@@ -704,7 +704,7 @@ static const struct cpu_dev intel_cpu_dev = {
 			  [11] = "Pentium III (Tualatin)",
 		  }
 		},
-		{ .vendor = X86_VENDOR_INTEL, .family = 15, .model_names =
+		{ .family = 15, .model_names =
 		  {
 			  [0] = "Pentium 4 (Unknown)",
 			  [1] = "Pentium 4 (Willamette)",
@@ -714,7 +714,7 @@ static const struct cpu_dev intel_cpu_dev = {
 		  }
 		},
 	},
-	.c_size_cache	= intel_size_cache,
+	.legacy_cache_size = intel_size_cache,
 #endif
 	.c_detect_tlb	= intel_detect_tlb,
 	.c_early_init   = early_init_intel,
diff --git a/arch/x86/kernel/cpu/umc.c b/arch/x86/kernel/cpu/umc.c
index 202759a14121..75c5ad5d35cc 100644
--- a/arch/x86/kernel/cpu/umc.c
+++ b/arch/x86/kernel/cpu/umc.c
@@ -11,8 +11,8 @@
 static const struct cpu_dev umc_cpu_dev = {
 	.c_vendor	= "UMC",
 	.c_ident	= { "UMC UMC UMC" },
-	.c_models = {
-		{ .vendor = X86_VENDOR_UMC, .family = 4, .model_names =
+	.legacy_models	= {
+		{ .family = 4, .model_names =
 		  {
 			  [1] = "U5D",
 			  [2] = "U5S",
-- 
cgit v1.2.3


From ee5872befc9324fa4c2583c24d7ee7120314a2b7 Mon Sep 17 00:00:00 2001
From: Jan Beulich
Date: Mon, 21 Oct 2013 09:31:57 +0100
Subject: x86/time: Honor ACPI FADT flag indicating absence of a CMOS RTC

Even though the omission was found only during code review
(originally in the Xen hypervisor, looking through ACPI v5 flags
and their meanings and uses), we shouldn't be creating a
corresponding platform device in that case.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/5265029D02000078000FC4D2@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/rtc.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 0aa29394ed6f..5b9dd445eb89 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -192,6 +192,14 @@ static __init int add_rtc_cmos(void)
 	if (mrst_identify_cpu())
 		return -ENODEV;
 
+#ifdef CONFIG_ACPI
+	if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_CMOS_RTC) {
+		/* This warning can likely go away again in a year or two. */
+		pr_info("ACPI: not registering RTC platform device\n");
+		return -ENODEV;
+	}
+#endif
+
 	platform_device_register(&rtc_device);
 	dev_info(&rtc_device.dev,
 		 "registered platform RTC device (no PNP device found)\n");
-- 
cgit v1.2.3


From 72548e836b0c4abbb652e791dee9c91203a9a4c6 Mon Sep 17 00:00:00 2001
From: Matt Fleming
Date: Fri, 4 Oct 2013 09:36:56 +0100
Subject: x86/efi: Add EFI framebuffer earlyprintk support

It's incredibly difficult to diagnose early EFI boot issues without
special hardware because earlyprintk=vga doesn't work on EFI systems.

Add support for writing to the EFI framebuffer, via earlyprintk=efi,
which will actually give users a chance of providing debug output.

Cc: H. Peter Anvin <hpa@zytor.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Jones <pjones@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 Documentation/kernel-parameters.txt  |   8 +-
 arch/x86/Kconfig.debug               |  10 ++
 arch/x86/include/asm/efi.h           |   2 +
 arch/x86/kernel/early_printk.c       |   7 ++
 arch/x86/platform/efi/Makefile       |   1 +
 arch/x86/platform/efi/early_printk.c | 191 +++++++++++++++++++++++++++++++++++
 6 files changed, 216 insertions(+), 3 deletions(-)
 create mode 100644 arch/x86/platform/efi/early_printk.c

(limited to 'arch')

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 7f9d4f53882c..7a0f202d482e 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -792,6 +792,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	earlyprintk=	[X86,SH,BLACKFIN,ARM]
 			earlyprintk=vga
+			earlyprintk=efi
 			earlyprintk=xen
 			earlyprintk=serial[,ttySn[,baudrate]]
 			earlyprintk=serial[,0x...[,baudrate]]
@@ -805,7 +806,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Append ",keep" to not disable it when the real console
 			takes over.
 
-			Only vga or serial or usb debug port at a time.
+			Only one of vga, efi, serial, or usb debug port can
+			be used at a time.
 
 			Currently only ttyS0 and ttyS1 may be specified by
 			name.  Other I/O ports may be explicitly specified
@@ -819,8 +821,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Interaction with the standard serial driver is not
 			very good.
 
-			The VGA output is eventually overwritten by the real
-			console.
+			The VGA and EFI output is eventually overwritten by
+			the real console.
 
 			The xen output can only be used by Xen PV guests.
 
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 78d91afb8e50..0f3621ed1db6 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -59,6 +59,16 @@ config EARLY_PRINTK_DBGP
 	  with klogd/syslogd or the X server. You should normally N here,
 	  unless you want to debug such a crash. You need usb debug device.
 
+config EARLY_PRINTK_EFI
+	bool "Early printk via the EFI framebuffer"
+	depends on EFI && EARLY_PRINTK
+	select FONT_SUPPORT
+	---help---
+	  Write kernel log output directly into the EFI framebuffer.
+
+	  This is useful for kernel debugging when your machine crashes very
+	  early before the console code is initialized.
+
 config X86_PTDUMP
 	bool "Export kernel pagetable layout to userspace via debugfs"
 	depends on DEBUG_KERNEL
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index 0062a0125041..65c6e6e3a552 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -109,6 +109,8 @@ static inline bool efi_is_native(void)
 	return IS_ENABLED(CONFIG_X86_64) == efi_enabled(EFI_64BIT);
 }
 
+extern struct console early_efi_console;
+
 #else
 /*
  * IF EFI is not configured, have the EFI calls return -ENOSYS.
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index d15f575a861b..6d3d20073615 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -17,6 +17,8 @@
 #include <asm/mrst.h>
 #include <asm/pgtable.h>
 #include <linux/usb/ehci_def.h>
+#include <linux/efi.h>
+#include <asm/efi.h>
 
 /* Simple VGA output */
 #define VGABASE		(__ISA_IO_base + 0xb8000)
@@ -234,6 +236,11 @@ static int __init setup_early_printk(char *buf)
 			early_console_register(&early_hsu_console, keep);
 		}
 #endif
+#ifdef CONFIG_EARLY_PRINTK_EFI
+		if (!strncmp(buf, "efi", 3))
+			early_console_register(&early_efi_console, keep);
+#endif
+
 		buf++;
 	}
 	return 0;
diff --git a/arch/x86/platform/efi/Makefile b/arch/x86/platform/efi/Makefile
index 6db1cc4c7534..b7b0b35c1981 100644
--- a/arch/x86/platform/efi/Makefile
+++ b/arch/x86/platform/efi/Makefile
@@ -1,2 +1,3 @@
 obj-$(CONFIG_EFI) 		+= efi.o efi_$(BITS).o efi_stub_$(BITS).o
 obj-$(CONFIG_ACPI_BGRT) += efi-bgrt.o
+obj-$(CONFIG_EARLY_PRINTK_EFI)	+= early_printk.o
diff --git a/arch/x86/platform/efi/early_printk.c b/arch/x86/platform/efi/early_printk.c
new file mode 100644
index 000000000000..6599a0027b76
--- /dev/null
+++ b/arch/x86/platform/efi/early_printk.c
@@ -0,0 +1,191 @@
+/*
+ * Copyright (C) 2013 Intel Corporation; author Matt Fleming
+ *
+ *  This file is part of the Linux kernel, and is made available under
+ *  the terms of the GNU General Public License version 2.
+ */
+
+#include <linux/console.h>
+#include <linux/efi.h>
+#include <linux/font.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <asm/setup.h>
+
+static const struct font_desc *font;
+static u32 efi_x, efi_y;
+
+static __init void early_efi_clear_scanline(unsigned int y)
+{
+	unsigned long base, *dst;
+	u16 len;
+
+	base = boot_params.screen_info.lfb_base;
+	len = boot_params.screen_info.lfb_linelength;
+
+	dst = early_ioremap(base + y*len, len);
+	if (!dst)
+		return;
+
+	memset(dst, 0, len);
+	early_iounmap(dst, len);
+}
+
+static __init void early_efi_scroll_up(void)
+{
+	unsigned long base, *dst, *src;
+	u16 len;
+	u32 i, height;
+
+	base = boot_params.screen_info.lfb_base;
+	len = boot_params.screen_info.lfb_linelength;
+	height = boot_params.screen_info.lfb_height;
+
+	for (i = 0; i < height - font->height; i++) {
+		dst = early_ioremap(base + i*len, len);
+		if (!dst)
+			return;
+
+		src = early_ioremap(base + (i + font->height) * len, len);
+		if (!src) {
+			early_iounmap(dst, len);
+			return;
+		}
+
+		memmove(dst, src, len);
+
+		early_iounmap(src, len);
+		early_iounmap(dst, len);
+	}
+}
+
+static void early_efi_write_char(u32 *dst, unsigned char c, unsigned int h)
+{
+	const u32 color_black = 0x00000000;
+	const u32 color_white = 0x00ffffff;
+	const u8 *src;
+	u8 s8;
+	int m;
+
+	src = font->data + c * font->height;
+	s8 = *(src + h);
+
+	for (m = 0; m < 8; m++) {
+		if ((s8 >> (7 - m)) & 1)
+			*dst = color_white;
+		else
+			*dst = color_black;
+		dst++;
+	}
+}
+
+static __init void
+early_efi_write(struct console *con, const char *str, unsigned int num)
+{
+	struct screen_info *si;
+	unsigned long base;
+	unsigned int len;
+	const char *s;
+	void *dst;
+
+	base = boot_params.screen_info.lfb_base;
+	si = &boot_params.screen_info;
+	len = si->lfb_linelength;
+
+	while (num) {
+		unsigned int linemax;
+		unsigned int h, count = 0;
+
+		for (s = str; *s && *s != '\n'; s++) {
+			if (count == num)
+				break;
+			count++;
+		}
+
+		linemax = (si->lfb_width - efi_x) / font->width;
+		if (count > linemax)
+			count = linemax;
+
+		for (h = 0; h < font->height; h++) {
+			unsigned int n, x;
+
+			dst = early_ioremap(base + (efi_y + h) * len, len);
+			if (!dst)
+				return;
+
+			s = str;
+			n = count;
+			x = efi_x;
+
+			while (n-- > 0) {
+				early_efi_write_char(dst + x*4, *s, h);
+				x += font->width;
+				s++;
+			}
+
+			early_iounmap(dst, len);
+		}
+
+		num -= count;
+		efi_x += count * font->width;
+		str += count;
+
+		if (num > 0 && *s == '\n') {
+			efi_x = 0;
+			efi_y += font->height;
+			str++;
+			num--;
+		}
+
+		if (efi_x >= si->lfb_width) {
+			efi_x = 0;
+			efi_y += font->height;
+		}
+
+		if (efi_y + font->height >= si->lfb_height) {
+			u32 i;
+
+			efi_y -= font->height;
+			early_efi_scroll_up();
+
+			for (i = 0; i < font->height; i++)
+				early_efi_clear_scanline(efi_y + i);
+		}
+	}
+}
+
+static __init int early_efi_setup(struct console *con, char *options)
+{
+	struct screen_info *si;
+	u16 xres, yres;
+	u32 i;
+
+	si = &boot_params.screen_info;
+	xres = si->lfb_width;
+	yres = si->lfb_height;
+
+	/*
+	 * early_efi_write_char() implicitly assumes a framebuffer with
+	 * 32-bits per pixel.
+	 */
+	if (si->lfb_depth != 32)
+		return -ENODEV;
+
+	font = get_default_font(xres, yres, -1, -1);
+	if (!font)
+		return -ENODEV;
+
+	efi_y = rounddown(yres, font->height) - font->height;
+	for (i = 0; i < (yres - efi_y) / font->height; i++)
+		early_efi_scroll_up();
+
+	return 0;
+}
+
+struct console early_efi_console = {
+	.name =		"earlyefi",
+	.write =	early_efi_write,
+	.setup =	early_efi_setup,
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+};
-- 
cgit v1.2.3


From 79d9701559a9f3e9b2021fbd292f5e70ad75f686 Mon Sep 17 00:00:00 2001
From: Grant Likely
Date: Thu, 19 Sep 2013 16:47:37 -0500
Subject: of/irq: create interrupts-extended property

The standard interrupts property in device tree can only handle
interrupts coming from a single interrupt parent. If a device is wired
to multiple interrupt controllers, then it needs to be attached to a
node with an interrupt-map property to demux the interrupt specifiers
which is confusing. It would be a lot easier if there was a form of the
interrupts property that allows for a separate interrupt phandle for
each interrupt specifier.

This patch does exactly that by creating a new interrupts-extended
property which reuses the phandle+arguments pattern used by GPIOs and
other core bindings.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Kumar Gala <galak@codeaurora.org>
[grant.likely: removed versatile platform hunks into separate patch]
Cc: Rob Herring <rob.herring@calxeda.com>
---
 .../bindings/interrupt-controller/interrupts.txt   | 29 +++++++--
 arch/arm/boot/dts/testcases/tests-interrupts.dtsi  | 16 +++++
 drivers/of/irq.c                                   | 16 +++--
 drivers/of/selftest.c                              | 70 ++++++++++++++++++++++
 4 files changed, 120 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
index 72a06c0ab1db..1486497a24c1 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
@@ -4,16 +4,33 @@ Specifying interrupt information for devices
 1) Interrupt client nodes
 -------------------------
 
-Nodes that describe devices which generate interrupts must contain an
-"interrupts" property. This property must contain a list of interrupt
-specifiers, one per output interrupt. The format of the interrupt specifier is
-determined by the interrupt controller to which the interrupts are routed; see
-section 2 below for details.
+Nodes that describe devices which generate interrupts must contain an either an
+"interrupts" property or an "interrupts-extended" property. These properties
+contain a list of interrupt specifiers, one per output interrupt. The format of
+the interrupt specifier is determined by the interrupt controller to which the
+interrupts are routed; see section 2 below for details.
+
+  Example:
+	interrupt-parent = <&intc1>;
+	interrupts = <5 0>, <6 0>;
 
 The "interrupt-parent" property is used to specify the controller to which
 interrupts are routed and contains a single phandle referring to the interrupt
 controller node. This property is inherited, so it may be specified in an
-interrupt client node or in any of its parent nodes.
+interrupt client node or in any of its parent nodes. Interrupts listed in the
+"interrupts" property are always in reference to the node's interrupt parent.
+
+The "interrupts-extended" property is a special form for use when a node needs
+to reference multiple interrupt parents. Each entry in this property contains
+both the parent phandle and the interrupt specifier. "interrupts-extended"
+should only be used when a device has multiple interrupt parents.
+
+  Example:
+	interrupts-extended = <&intc1 5 1>, <&intc2 1 0>;
+
+A device node may contain either "interrupts" or "interrupts-extended", but not
+both. If both properties are present, then the operating system should log an
+error and use only the data in "interrupts".
 
 2) Interrupt controller nodes
 -----------------------------
diff --git a/arch/arm/boot/dts/testcases/tests-interrupts.dtsi b/arch/arm/boot/dts/testcases/tests-interrupts.dtsi
index 6ecda716e9d4..560d6bf680b6 100644
--- a/arch/arm/boot/dts/testcases/tests-interrupts.dtsi
+++ b/arch/arm/boot/dts/testcases/tests-interrupts.dtsi
@@ -27,6 +27,12 @@
 						<4 &test_intc2 15 16>;
 			};
 
+			test_intmap1: intmap1 {
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-map = <1 2 &test_intc0 15>;
+			};
+
 			interrupts0 {
 				interrupt-parent = <&test_intc0>;
 				interrupts = <1>, <2>, <3>, <4>;
@@ -36,6 +42,16 @@
 				interrupt-parent = <&test_intmap0>;
 				interrupts = <1>, <2>, <3>, <4>;
 			};
+
+			interrupts-extended0 {
+				interrupts-extended = <&test_intc0 1>,
+						      <&test_intc1 2 3 4>,
+						      <&test_intc2 5 6>,
+						      <&test_intmap0 1>,
+						      <&test_intmap0 2>,
+						      <&test_intmap0 3>,
+						      <&test_intmap1 1 2>;
+			};
 		};
 	};
 };
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 7c4ff122785f..8cc62b4a7988 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -292,17 +292,23 @@ int of_irq_parse_one(struct device_node *device, int index, struct of_phandle_ar
 	if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC)
 		return of_irq_parse_oldworld(device, index, out_irq);
 
+	/* Get the reg property (if any) */
+	addr = of_get_property(device, "reg", NULL);
+
 	/* Get the interrupts property */
 	intspec = of_get_property(device, "interrupts", &intlen);
-	if (intspec == NULL)
-		return -EINVAL;
+	if (intspec == NULL) {
+		/* Try the new-style interrupts-extended */
+		res = of_parse_phandle_with_args(device, "interrupts-extended",
+						"#interrupt-cells", index, out_irq);
+		if (res)
+			return -EINVAL;
+		return of_irq_parse_raw(addr, out_irq);
+	}
 	intlen /= sizeof(*intspec);
 
 	pr_debug(" intspec=%d intlen=%d\n", be32_to_cpup(intspec), intlen);
 
-	/* Get the reg property (if any) */
-	addr = of_get_property(device, "reg", NULL);
-
 	/* Look for the interrupt parent. */
 	p = of_irq_find_parent(device);
 	if (p == NULL)
diff --git a/drivers/of/selftest.c b/drivers/of/selftest.c
index 9c80f0b7556b..e21012bde639 100644
--- a/drivers/of/selftest.c
+++ b/drivers/of/selftest.c
@@ -231,6 +231,75 @@ static void __init of_selftest_parse_interrupts(void)
 	of_node_put(np);
 }
 
+static void __init of_selftest_parse_interrupts_extended(void)
+{
+	struct device_node *np;
+	struct of_phandle_args args;
+	int i, rc;
+
+	np = of_find_node_by_path("/testcase-data/interrupts/interrupts-extended0");
+	if (!np) {
+		pr_err("missing testcase data\n");
+		return;
+	}
+
+	for (i = 0; i < 7; i++) {
+		bool passed = true;
+		rc = of_irq_parse_one(np, i, &args);
+
+		/* Test the values from tests-phandle.dtsi */
+		switch (i) {
+		case 0:
+			passed &= !rc;
+			passed &= (args.args_count == 1);
+			passed &= (args.args[0] == 1);
+			break;
+		case 1:
+			passed &= !rc;
+			passed &= (args.args_count == 3);
+			passed &= (args.args[0] == 2);
+			passed &= (args.args[1] == 3);
+			passed &= (args.args[2] == 4);
+			break;
+		case 2:
+			passed &= !rc;
+			passed &= (args.args_count == 2);
+			passed &= (args.args[0] == 5);
+			passed &= (args.args[1] == 6);
+			break;
+		case 3:
+			passed &= !rc;
+			passed &= (args.args_count == 1);
+			passed &= (args.args[0] == 9);
+			break;
+		case 4:
+			passed &= !rc;
+			passed &= (args.args_count == 3);
+			passed &= (args.args[0] == 10);
+			passed &= (args.args[1] == 11);
+			passed &= (args.args[2] == 12);
+			break;
+		case 5:
+			passed &= !rc;
+			passed &= (args.args_count == 2);
+			passed &= (args.args[0] == 13);
+			passed &= (args.args[1] == 14);
+			break;
+		case 6:
+			passed &= !rc;
+			passed &= (args.args_count == 1);
+			passed &= (args.args[0] == 15);
+			break;
+		default:
+			passed = false;
+		}
+
+		selftest(passed, "index %i - data error on node %s rc=%i\n",
+			 i, args.np->full_name, rc);
+	}
+	of_node_put(np);
+}
+
 static int __init of_selftest(void)
 {
 	struct device_node *np;
@@ -246,6 +315,7 @@ static int __init of_selftest(void)
 	of_selftest_parse_phandle_with_args();
 	of_selftest_property_match_string();
 	of_selftest_parse_interrupts();
+	of_selftest_parse_interrupts_extended();
 	pr_info("end of selftest - %i passed, %i failed\n",
 		selftest_results.passed, selftest_results.failed);
 	return 0;
-- 
cgit v1.2.3


From 0976c946a610d06e907335b7a3afa6db046f8e1b Mon Sep 17 00:00:00 2001
From: Grant Likely
Date: Mon, 28 Oct 2013 16:50:11 -0700
Subject: arm/versatile: Fix versatile irq specifications.

Two of the versatile irq definitions are incorrect, mostly because two
devices have connections to more than one interrupt controller. Fix them
by using the new interrupts-extended property to fan out without using
an awful interrupt-map nexus node.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
---
 arch/arm/boot/dts/versatile-ab.dts | 2 +-
 arch/arm/boot/dts/versatile-pb.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index dde75ae8b4b1..e01e5a081def 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -185,7 +185,7 @@
 			mmc@5000 {
 				compatible = "arm,primecell";
 				reg = < 0x5000 0x1000>;
-				interrupts = <22 34>;
+				interrupts-extended = <&vic 22 &sic 2>;
 			};
 			kmi@6000 {
 				compatible = "arm,pl050", "arm,primecell";
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index 7e8175269064..f43907c40c93 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -41,7 +41,7 @@
 			mmc@b000 {
 				compatible = "arm,primecell";
 				reg = <0xb000 0x1000>;
-				interrupts = <23 34>;
+				interrupts-extended = <&vic 23 &sic 2>;
 			};
 		};
 	};
-- 
cgit v1.2.3


From 0e3d4373b8a7757a8f5187f5cabafb6aceff469b Mon Sep 17 00:00:00 2001
From: Minghuan Lian
Date: Wed, 31 Jul 2013 10:59:07 +0800
Subject: powerpc/dts: fix sRIO error interrupt for b4860

For B4 platform, MPIC EISR register is in reversed bitmap order,
instead of "Error interrupt source 0-31. Bit 0 represents SRC0."
the correct ordering is "Error interrupt source 0-31. Bit 0
represents SRC31." This patch is to fix sRIO EISR bit value
of error interrupt in dts node.

Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/fsl/b4860si-post.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
index e5cf6c81dd66..981397518fc6 100644
--- a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
@@ -41,7 +41,7 @@
 
 &rio {
 	compatible = "fsl,srio";
-	interrupts = <16 2 1 11>;
+	interrupts = <16 2 1 20>;
 	#address-cells = <2>;
 	#size-cells = <2>;
 	fsl,iommu-parent = <&pamu0>;
-- 
cgit v1.2.3


From bbd234b146a158ae59da0592c1598336db63b0fc Mon Sep 17 00:00:00 2001
From: Chunhe Lan
Date: Fri, 2 Aug 2013 16:46:25 +0800
Subject: powerpc/pci: Change the DECLARE_PCI_FIXUP_{HEADER => EARLY} macro of
 pci quirk

Freescale platform has class code = 0x0b2000, when it boots. This makes
kernel PCI bus code to setup these devices resulting into the following
notice information when trying to enable them:

pci 0000:00:00.0: ignoring class 0x0b2000 (doesn't match header type 01)

The above information is outputted by judging value of dev->class before
pci_setup_device() function, and the DECLARE_PCI_FIXUP_HEADER quirk runs
after pci_setup_device() function. But the DECLARE_PCI_FIXUP_EARLY quirk
runs before judging value of dev->class and pci_setup_device() function.
So we use the DECLARE_PCI_FIXUP_EARLY macro to fix this issue.

Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/sysdev/fsl_pci.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index ccfb50ddfe38..21039634d1d0 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -40,7 +40,7 @@
 
 static int fsl_pcie_bus_fixup, is_mpc83xx_pci;
 
-static void quirk_fsl_pcie_header(struct pci_dev *dev)
+static void quirk_fsl_pcie_early(struct pci_dev *dev)
 {
 	u8 hdr_type;
 
@@ -562,7 +562,8 @@ no_bridge:
 }
 #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */
 
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID,
+			quirk_fsl_pcie_early);
 
 #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
 struct mpc83xx_pcie_priv {
-- 
cgit v1.2.3


From 4f6d45d7db7e4622a74b9fd8c99b13c68129d70d Mon Sep 17 00:00:00 2001
From: Lijun Pan
Date: Thu, 24 Oct 2013 16:11:13 -0500
Subject: powerpc/e6500: Include Power ISA properties

b4420 and b4860 device trees do not have these properties.

Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi | 2 ++
 arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi | 2 ++
 2 files changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
index 7b4426e0a5a5..c6e451affb05 100644
--- a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
@@ -34,6 +34,8 @@
 
 /dts-v1/;
 
+/include/ "e6500_power_isa.dtsi"
+
 / {
 	compatible = "fsl,B4420";
 	#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
index 5263fa46a3fb..9bc26b147900 100644
--- a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
@@ -34,6 +34,8 @@
 
 /dts-v1/;
 
+/include/ "e6500_power_isa.dtsi"
+
 / {
 	compatible = "fsl,B4860";
 	#address-cells = <2>;
-- 
cgit v1.2.3


From f4b123886d2cdd196a0e3482de48d921443790c7 Mon Sep 17 00:00:00 2001
From: Lijun Pan
Date: Thu, 24 Oct 2013 16:03:25 -0500
Subject: powerpc/e500v2: Include Power ISA properties

bsc9131 device tree does not have these properties.

Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi
index 743e4aeda349..f6ec4a67560c 100644
--- a/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi
@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,BSC9131";
 	#address-cells = <2>;
-- 
cgit v1.2.3


From a0b38b4e7858c76e7e53510f24d6bf22cab144a8 Mon Sep 17 00:00:00 2001
From: Suzuki Poulose
Date: Tue, 27 Aug 2013 13:22:14 +0530
Subject: powerpc: Set the NOTE type for SPE regset

The regset defintion for SPE doesn't have the core_note_type
set, which prevents it from being dumped. Add the note type
NT_PPC_SPE for SPE regset.

Signed-off-by: Suzuki K Poulose <suzuki@in.ibm.com>
Cc: Roland McGrath <roland@hack.frob.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/ptrace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 01be88b7321e..75fb40498b41 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -658,7 +658,7 @@ static const struct user_regset native_regsets[] = {
 #endif
 #ifdef CONFIG_SPE
 	[REGSET_SPE] = {
-		.n = 35,
+		.core_note_type = NT_PPC_SPE, .n = 35,
 		.size = sizeof(u32), .align = sizeof(u32),
 		.active = evr_active, .get = evr_get, .set = evr_set
 	},
-- 
cgit v1.2.3


From 1eb2819d69c818784cab0d4a89a35e36bd753e57 Mon Sep 17 00:00:00 2001
From: LEROY Christophe
Date: Wed, 28 Aug 2013 16:19:17 +0200
Subject: powerpc/mpc8xx: Clearer Oops message for Software Emulation Exception

This patch modifies the Oops message in case of Software Emulation Exception.
The existing message is quite confusing because it refers to FPU Emulation
while most often the issue is due to either a non supported instruction
(not necessarily FPU related) or a stale instruction due to HW issues.
The new message tries to be more generic in order to make the user understand
that the Oops is due to something wrong with an instruction, not necessarily
due to an FPU instruction.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/traps.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index f686686ca0aa..ad20dcfaedd0 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1468,7 +1468,8 @@ void SoftwareEmulation(struct pt_regs *regs)
 
 	if (!user_mode(regs)) {
 		debugger(regs);
-		die("Kernel Mode Software FPU Emulation", regs, SIGFPE);
+		die("Kernel Mode Unimplemented Instruction or SW FPU Emulation",
+			regs, SIGFPE);
 	}
 
 	if (!emulate_math(regs))
-- 
cgit v1.2.3


From 0f06ad70921eb00fa48f73754059fd8854f32572 Mon Sep 17 00:00:00 2001
From: Haijun.Zhang
Date: Thu, 29 Aug 2013 11:31:28 +0800
Subject: powerpc/eSDCH: Specify voltage for T4240QDS

Freescale T4240QDS reference board has extra voltage shifters added
to allow 3.3V operation, so add 3.3v voltage support for T4240QDS.
1.8v and 3.3v is recommand for eMMC and SDHC card.

Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/t4240qds.dts | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/t4240qds.dts b/arch/powerpc/boot/dts/t4240qds.dts
index 0555976dd0f3..eb3c3de4ef53 100644
--- a/arch/powerpc/boot/dts/t4240qds.dts
+++ b/arch/powerpc/boot/dts/t4240qds.dts
@@ -148,6 +148,10 @@
 				interrupts = <0x1 0x1 0 0>;
 			};
 		};
+
+		sdhc@114000 {
+			voltage-ranges = <1800 1800 3300 3300>;
+		};
 	};
 
 	pci0: pcie@ffe240000 {
-- 
cgit v1.2.3


From 3169ab00e0727ea2891483e636bd8e6aa11521a1 Mon Sep 17 00:00:00 2001
From: Haijun.Zhang
Date: Mon, 2 Sep 2013 18:37:02 +0800
Subject: powerpc/dts: Correct sdhci quirk for bsc9131

We use property "sdhci,auto-cmd12" instead of "fsl,sdhci-auto-cmd12"
to distinguish if the sdhc host has quirk SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12.

Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi
index 5180d9d37989..0c0efa94cfb4 100644
--- a/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi
@@ -130,7 +130,7 @@ usb@22000 {
 
 /include/ "pq3-esdhc-0.dtsi"
 	sdhc@2e000 {
-		fsl,sdhci-auto-cmd12;
+		sdhci,auto-cmd12;
 		interrupts = <41 0x2 0 0>;
 	};
 
-- 
cgit v1.2.3


From 788d399d3c3dd1e02ab316272e1dc1881182e16d Mon Sep 17 00:00:00 2001
From: Shengzhou Liu
Date: Tue, 3 Sep 2013 16:28:26 +0800
Subject: powerpc/fsl/defconfig: enable CONFIG_AT803X_PHY

Enable CONFIG_AT803X_PHY to support AR8030/8033/8035 PHY.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/configs/corenet32_smp_defconfig | 1 +
 arch/powerpc/configs/mpc85xx_defconfig       | 1 +
 arch/powerpc/configs/mpc85xx_smp_defconfig   | 1 +
 3 files changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index 3dfab4c40c76..71bc43ab649a 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -104,6 +104,7 @@ CONFIG_FSL_PQ_MDIO=y
 CONFIG_E1000=y
 CONFIG_E1000E=y
 CONFIG_VITESSE_PHY=y
+CONFIG_AT803X_PHY=y
 CONFIG_FIXED_PHY=y
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index dc098d988211..d2e0fab5ee5b 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -138,6 +138,7 @@ CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
+CONFIG_AT803X_PHY=y
 CONFIG_FIXED_PHY=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 5bca60161bb3..4cb7b59e98bd 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -138,6 +138,7 @@ CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
+CONFIG_AT803X_PHY=y
 CONFIG_FIXED_PHY=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
-- 
cgit v1.2.3


From afc4b47372ace24c630c1d79b3a0ed32bf1d19fd Mon Sep 17 00:00:00 2001
From: Hongtao Jia
Date: Mon, 9 Sep 2013 18:03:33 +0800
Subject: powerpc: Add I2C bus multiplexer node for B4 and T4240QDS

In both B4 and T4240QDS platform PCA9547 I2C bus multiplexer is used.
The sub-nodes are also reorganized according to right I2C topology.

Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/b4qds.dtsi   | 51 +++++++++++++++++-----------
 arch/powerpc/boot/dts/t4240qds.dts | 69 ++++++++++++++++++++++----------------
 2 files changed, 73 insertions(+), 47 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/b4qds.dtsi b/arch/powerpc/boot/dts/b4qds.dtsi
index e6d2f8f90544..8b47edcfabf0 100644
--- a/arch/powerpc/boot/dts/b4qds.dtsi
+++ b/arch/powerpc/boot/dts/b4qds.dtsi
@@ -120,25 +120,38 @@
 		};
 
 		i2c@118000 {
-			eeprom@50 {
-				compatible = "at24,24c64";
-				reg = <0x50>;
-			};
-			eeprom@51 {
-				compatible = "at24,24c256";
-				reg = <0x51>;
-			};
-			eeprom@53 {
-				compatible = "at24,24c256";
-				reg = <0x53>;
-			};
-			eeprom@57 {
-				compatible = "at24,24c256";
-				reg = <0x57>;
-			};
-			rtc@68 {
-				compatible = "dallas,ds3232";
-				reg = <0x68>;
+			mux@77 {
+				compatible = "nxp,pca9547";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					eeprom@50 {
+						compatible = "at24,24c64";
+						reg = <0x50>;
+					};
+					eeprom@51 {
+						compatible = "at24,24c256";
+						reg = <0x51>;
+					};
+					eeprom@53 {
+						compatible = "at24,24c256";
+						reg = <0x53>;
+					};
+					eeprom@57 {
+						compatible = "at24,24c256";
+						reg = <0x57>;
+					};
+					rtc@68 {
+						compatible = "dallas,ds3232";
+						reg = <0x68>;
+					};
+				};
 			};
 		};
 
diff --git a/arch/powerpc/boot/dts/t4240qds.dts b/arch/powerpc/boot/dts/t4240qds.dts
index eb3c3de4ef53..63e81b010804 100644
--- a/arch/powerpc/boot/dts/t4240qds.dts
+++ b/arch/powerpc/boot/dts/t4240qds.dts
@@ -118,34 +118,47 @@
 		};
 
 		i2c@118000 {
-			eeprom@51 {
-				compatible = "at24,24c256";
-				reg = <0x51>;
-			};
-			eeprom@52 {
-				compatible = "at24,24c256";
-				reg = <0x52>;
-			};
-			eeprom@53 {
-				compatible = "at24,24c256";
-				reg = <0x53>;
-			};
-			eeprom@54 {
-				compatible = "at24,24c256";
-				reg = <0x54>;
-			};
-			eeprom@55 {
-				compatible = "at24,24c256";
-				reg = <0x55>;
-			};
-			eeprom@56 {
-				compatible = "at24,24c256";
-				reg = <0x56>;
-			};
-			rtc@68 {
-				compatible = "dallas,ds3232";
-				reg = <0x68>;
-				interrupts = <0x1 0x1 0 0>;
+			mux@77 {
+				compatible = "nxp,pca9547";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					eeprom@51 {
+						compatible = "at24,24c256";
+						reg = <0x51>;
+					};
+					eeprom@52 {
+						compatible = "at24,24c256";
+						reg = <0x52>;
+					};
+					eeprom@53 {
+						compatible = "at24,24c256";
+						reg = <0x53>;
+					};
+					eeprom@54 {
+						compatible = "at24,24c256";
+						reg = <0x54>;
+					};
+					eeprom@55 {
+						compatible = "at24,24c256";
+						reg = <0x55>;
+					};
+					eeprom@56 {
+						compatible = "at24,24c256";
+						reg = <0x56>;
+					};
+					rtc@68 {
+						compatible = "dallas,ds3232";
+						reg = <0x68>;
+						interrupts = <0x1 0x1 0 0>;
+					};
+				};
 			};
 		};
 
-- 
cgit v1.2.3


From 79df1b374ba681f1322a0efd9a88bb85f1462796 Mon Sep 17 00:00:00 2001
From: LEROY Christophe
Date: Wed, 11 Sep 2013 18:44:44 +0200
Subject: powerpc/8xx: Revert commit e0908085fc2391c85b85fb814ae1df377c8e0dcb

The commit e0908085fc2391c85b85fb814ae1df377c8e0dcb ("powerpc/8xx: Fix
regression introduced by cache coherency rewrite") is not needed
anymore.  The issue was because dcbst wrongly sets the store bit when
causing a DTLB error, but this is now fixed by commit
0a2ab51ffb8dfdf51402dcfb446629648c96bc78 ("powerpc/8xx: Fixup DAR from
buggy dcbX instructions.") which handles the buggy dcbx instructions on
data page faults on the 8xx.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[scottwood@freescale.com: fix commit message]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/mm/pgtable.c | 19 +++----------------
 1 file changed, 3 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index edda589795c3..841e0d00863c 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -32,8 +32,6 @@
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
 
-#include "mmu_decl.h"
-
 static inline int is_exec_fault(void)
 {
 	return current->thread.regs && TRAP(current->thread.regs) == 0x400;
@@ -72,7 +70,7 @@ struct page * maybe_pte_to_page(pte_t pte)
  * support falls into the same category.
  */
 
-static pte_t set_pte_filter(pte_t pte, unsigned long addr)
+static pte_t set_pte_filter(pte_t pte)
 {
 	pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
 	if (pte_looks_normal(pte) && !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) ||
@@ -81,17 +79,6 @@ static pte_t set_pte_filter(pte_t pte, unsigned long addr)
 		if (!pg)
 			return pte;
 		if (!test_bit(PG_arch_1, &pg->flags)) {
-#ifdef CONFIG_8xx
-			/* On 8xx, cache control instructions (particularly
-			 * "dcbst" from flush_dcache_icache) fault as write
-			 * operation if there is an unpopulated TLB entry
-			 * for the address in question. To workaround that,
-			 * we invalidate the TLB here, thus avoiding dcbst
-			 * misbehaviour.
-			 */
-			/* 8xx doesn't care about PID, size or ind args */
-			_tlbil_va(addr, 0, 0, 0);
-#endif /* CONFIG_8xx */
 			flush_dcache_icache_page(pg);
 			set_bit(PG_arch_1, &pg->flags);
 		}
@@ -111,7 +98,7 @@ static pte_t set_access_flags_filter(pte_t pte, struct vm_area_struct *vma,
  * as we don't have two bits to spare for _PAGE_EXEC and _PAGE_HWEXEC so
  * instead we "filter out" the exec permission for non clean pages.
  */
-static pte_t set_pte_filter(pte_t pte, unsigned long addr)
+static pte_t set_pte_filter(pte_t pte)
 {
 	struct page *pg;
 
@@ -193,7 +180,7 @@ void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
 	 * this context might not have been activated yet when this
 	 * is called.
 	 */
-	pte = set_pte_filter(pte, addr);
+	pte = set_pte_filter(pte);
 
 	/* Perform the setting of the PTE */
 	__set_pte_at(mm, addr, ptep, pte, 0);
-- 
cgit v1.2.3


From 7371fcb7f71854a0add525e6024cd44b81a31dde Mon Sep 17 00:00:00 2001
From: Scott Wood
Date: Wed, 11 Sep 2013 18:36:52 -0500
Subject: powerpc/b4qds: enable coreint

Commit 9837b43c5f3514e5d28f65f1513f4dc6759d2810 ("powerpc/85xx: enable
coreint for all the 64bit boards") removed the ifdef that avoided
coreint on 64-bit, but it missed b4_qds.c.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Shaveta Leekha <shaveta@freescale.com>
---
 arch/powerpc/platforms/85xx/b4_qds.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/85xx/b4_qds.c b/arch/powerpc/platforms/85xx/b4_qds.c
index 0c6702f8b88e..0f18663f3a76 100644
--- a/arch/powerpc/platforms/85xx/b4_qds.c
+++ b/arch/powerpc/platforms/85xx/b4_qds.c
@@ -79,12 +79,7 @@ define_machine(b4_qds) {
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
 #endif
-/* coreint doesn't play nice with lazy EE, use legacy mpic for now */
-#ifdef CONFIG_PPC64
-	.get_irq		= mpic_get_irq,
-#else
 	.get_irq		= mpic_get_coreint_irq,
-#endif
 	.restart		= fsl_rstcr_restart,
 	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= udbg_progress,
-- 
cgit v1.2.3


From 8f4af7df86c793fe3333e0cd2c769beef912d21c Mon Sep 17 00:00:00 2001
From: York Sun
Date: Mon, 16 Sep 2013 16:38:06 -0700
Subject: powerpc/t4240emu: Add device tree file for t4240emu

T4240EMU is an emulator target with minimum peripherals. It is based on
T4240QDS and trimmed down most peripherals due to either not modeled or
lack of board level connections. The main purpose of this minimum dts is
to speed up booting on emulator.

Signed-off-by: York Sun <yorksun@freescale.com>
[scottwood@freescale.com: whitespace fixes]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/t4240emu.dts | 268 +++++++++++++++++++++++++++++++++++++
 1 file changed, 268 insertions(+)
 create mode 100644 arch/powerpc/boot/dts/t4240emu.dts

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/t4240emu.dts b/arch/powerpc/boot/dts/t4240emu.dts
new file mode 100644
index 000000000000..ee24ab335598
--- /dev/null
+++ b/arch/powerpc/boot/dts/t4240emu.dts
@@ -0,0 +1,268 @@
+/*
+ * T4240 emulator Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "fsl/e6500_power_isa.dtsi"
+/ {
+	compatible = "fsl,T4240";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		dma0 = &dma0;
+		dma1 = &dma1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e6500@0 {
+			device_type = "cpu";
+			reg = <0 1>;
+			next-level-cache = <&L2_1>;
+		};
+		cpu1: PowerPC,e6500@2 {
+			device_type = "cpu";
+			reg = <2 3>;
+			next-level-cache = <&L2_1>;
+		};
+		cpu2: PowerPC,e6500@4 {
+			device_type = "cpu";
+			reg = <4 5>;
+			next-level-cache = <&L2_1>;
+		};
+		cpu3: PowerPC,e6500@6 {
+			device_type = "cpu";
+			reg = <6 7>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu4: PowerPC,e6500@8 {
+			device_type = "cpu";
+			reg = <8 9>;
+			next-level-cache = <&L2_2>;
+		};
+		cpu5: PowerPC,e6500@10 {
+			device_type = "cpu";
+			reg = <10 11>;
+			next-level-cache = <&L2_2>;
+		};
+		cpu6: PowerPC,e6500@12 {
+			device_type = "cpu";
+			reg = <12 13>;
+			next-level-cache = <&L2_2>;
+		};
+		cpu7: PowerPC,e6500@14 {
+			device_type = "cpu";
+			reg = <14 15>;
+			next-level-cache = <&L2_2>;
+		};
+
+		cpu8: PowerPC,e6500@16 {
+			device_type = "cpu";
+			reg = <16 17>;
+			next-level-cache = <&L2_3>;
+		};
+		cpu9: PowerPC,e6500@18 {
+			device_type = "cpu";
+			reg = <18 19>;
+			next-level-cache = <&L2_3>;
+		};
+		cpu10: PowerPC,e6500@20 {
+			device_type = "cpu";
+			reg = <20 21>;
+			next-level-cache = <&L2_3>;
+		};
+		cpu11: PowerPC,e6500@22 {
+			device_type = "cpu";
+			reg = <22 23>;
+			next-level-cache = <&L2_3>;
+		};
+	};
+};
+
+/ {
+	model = "fsl,T4240QDS";
+	compatible = "fsl,T4240EMU", "fsl,T4240QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <25 2 0 0>;
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.7",
+				"fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.7",
+				"fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 22>;
+	};
+
+	ddr3: memory-controller@a000 {
+		compatible = "fsl,qoriq-memory-controller-v4.7",
+				"fsl,qoriq-memory-controller";
+		reg = <0xa000 0x1000>;
+		interrupts = <16 2 1 21>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,t4240-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000
+		       0x12000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26
+			      16 2 1 25>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x6000>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+	};
+
+/include/ "fsl/qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,t4240-device-config", "fsl,qoriq-device-config-2.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
+		reg = <0xe1000 0x1000>;
+	};
+
+/include/ "fsl/qoriq-dma-0.dtsi"
+/include/ "fsl/qoriq-dma-1.dtsi"
+
+/include/ "fsl/qoriq-i2c-0.dtsi"
+/include/ "fsl/qoriq-i2c-1.dtsi"
+/include/ "fsl/qoriq-duart-0.dtsi"
+/include/ "fsl/qoriq-duart-1.dtsi"
+
+	L2_1: l2-cache-controller@c20000 {
+		compatible = "fsl,t4240-l2-cache-controller";
+		reg = <0xc20000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+	L2_2: l2-cache-controller@c60000 {
+		compatible = "fsl,t4240-l2-cache-controller";
+		reg = <0xc60000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+	L2_3: l2-cache-controller@ca0000 {
+		compatible = "fsl,t4240-l2-cache-controller";
+		reg = <0xca0000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+};
-- 
cgit v1.2.3


From 312325031d0da8a7c4b2857e79a23fb89df2b887 Mon Sep 17 00:00:00 2001
From: York Sun
Date: Mon, 16 Sep 2013 16:38:07 -0700
Subject: powerpc/b4860emu: Add device tree file for b4860emu

B4860EMU is a emualtor target with minimum peripherals. It is based on
B4860QDS and trimmed down most peripherals due to either not modeled or
lack of board level connections. The main purpose of this minimum dts is
to speed up booting on emulator.

Signed-off-by: York Sun <yorksun@freescale.com>
[scottwood@freescale.com: whitespace fix]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/b4860emu.dts | 218 +++++++++++++++++++++++++++++++++++++
 1 file changed, 218 insertions(+)
 create mode 100644 arch/powerpc/boot/dts/b4860emu.dts

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/b4860emu.dts b/arch/powerpc/boot/dts/b4860emu.dts
new file mode 100644
index 000000000000..7290021f2dfc
--- /dev/null
+++ b/arch/powerpc/boot/dts/b4860emu.dts
@@ -0,0 +1,218 @@
+/*
+ * B4860 emulator Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/dts-v1/;
+
+/include/ "fsl/e6500_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,B4860";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		dma0 = &dma0;
+		dma1 = &dma1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e6500@0 {
+			device_type = "cpu";
+			reg = <0 1>;
+			next-level-cache = <&L2>;
+		};
+		cpu1: PowerPC,e6500@2 {
+			device_type = "cpu";
+			reg = <2 3>;
+			next-level-cache = <&L2>;
+		};
+		cpu2: PowerPC,e6500@4 {
+			device_type = "cpu";
+			reg = <4 5>;
+			next-level-cache = <&L2>;
+		};
+		cpu3: PowerPC,e6500@6 {
+			device_type = "cpu";
+			reg = <6 7>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
+
+/ {
+	model = "fsl,B4860QDS";
+	compatible = "fsl,B4860EMU", "fsl,B4860QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <25 2 0 0>;
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 2>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 8>;
+	};
+
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 9>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,b4-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000>;
+		interrupts = <16 2 1 4>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,b4-corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 0>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 1>;
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <8 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+	};
+
+/include/ "fsl/qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,b4-device-config";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0";
+		reg = <0xe1000 0x1000>;
+	};
+
+/include/ "fsl/qoriq-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+
+/include/ "fsl/qoriq-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+
+/include/ "fsl/qoriq-i2c-0.dtsi"
+/include/ "fsl/qoriq-i2c-1.dtsi"
+/include/ "fsl/qoriq-duart-0.dtsi"
+/include/ "fsl/qoriq-duart-1.dtsi"
+
+	L2: l2-cache-controller@c20000 {
+		compatible = "fsl,b4-l2-cache-controller";
+		reg = <0xc20000 0x1000>;
+		next-level-cache = <&cpc>;
+	};
+};
-- 
cgit v1.2.3


From 8f4a9e525a91d5903165167f1a7dbb22e97edcd0 Mon Sep 17 00:00:00 2001
From: Prabhakar Kushwaha
Date: Tue, 24 Sep 2013 16:20:32 +0530
Subject: powerpc/dts/c293pcie: Add range field for IFC NAND

C290PCIe has NAND flash present on IFC Chip Select(CS) 1.

So Add "ranges" field for NAND flash on CS1.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/c293pcie.dts | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/c293pcie.dts b/arch/powerpc/boot/dts/c293pcie.dts
index 1238bda8901f..6681cc21030b 100644
--- a/arch/powerpc/boot/dts/c293pcie.dts
+++ b/arch/powerpc/boot/dts/c293pcie.dts
@@ -45,6 +45,7 @@
 	ifc: ifc@fffe1e000 {
 		reg = <0xf 0xffe1e000 0 0x2000>;
 		ranges = <0x0 0x0 0xf 0xec000000 0x04000000
+			  0x1 0x0 0xf 0xff800000 0x00010000
 			  0x2 0x0 0xf 0xffdf0000 0x00010000>;
 
 	};
-- 
cgit v1.2.3


From 512e267f3594b5a3b4937a00666241cb994ef55a Mon Sep 17 00:00:00 2001
From: Kevin Hao
Date: Thu, 26 Sep 2013 09:42:26 +0800
Subject: powerpc/85xx: introduce corenet_generic machine

In the current kernel, the board files for p2041rdb, p3041ds, p4080ds,
p5020ds, p5040ds, t4240qds and b4qds are almost the same except the
machine name. So this introduces a cornet_generic machine to support
all these boards to avoid the code duplication.

With these changes the file corenet_ds.h becomes useless. Just delete
it.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/platforms/85xx/Kconfig      | 10 ++++
 arch/powerpc/platforms/85xx/Makefile     |  8 +--
 arch/powerpc/platforms/85xx/b4_qds.c     | 97 --------------------------------
 arch/powerpc/platforms/85xx/corenet_ds.c | 86 ++++++++++++++++++++++++++++
 arch/powerpc/platforms/85xx/corenet_ds.h | 19 -------
 arch/powerpc/platforms/85xx/p2041_rdb.c  | 87 ----------------------------
 arch/powerpc/platforms/85xx/p3041_ds.c   | 89 -----------------------------
 arch/powerpc/platforms/85xx/p4080_ds.c   | 87 ----------------------------
 arch/powerpc/platforms/85xx/p5020_ds.c   | 93 ------------------------------
 arch/powerpc/platforms/85xx/p5040_ds.c   | 84 ---------------------------
 arch/powerpc/platforms/85xx/t4240_qds.c  | 93 ------------------------------
 11 files changed, 97 insertions(+), 656 deletions(-)
 delete mode 100644 arch/powerpc/platforms/85xx/b4_qds.c
 delete mode 100644 arch/powerpc/platforms/85xx/corenet_ds.h
 delete mode 100644 arch/powerpc/platforms/85xx/p2041_rdb.c
 delete mode 100644 arch/powerpc/platforms/85xx/p3041_ds.c
 delete mode 100644 arch/powerpc/platforms/85xx/p4080_ds.c
 delete mode 100644 arch/powerpc/platforms/85xx/p5020_ds.c
 delete mode 100644 arch/powerpc/platforms/85xx/p5040_ds.c
 delete mode 100644 arch/powerpc/platforms/85xx/t4240_qds.c

(limited to 'arch')

diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index de2eb9320993..3bee94398ec3 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -228,6 +228,7 @@ config P2041_RDB
 	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
+	select CORENET_GENERIC
 	help
 	  This option enables support for the P2041 RDB board
 
@@ -241,6 +242,7 @@ config P3041_DS
 	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
+	select CORENET_GENERIC
 	help
 	  This option enables support for the P3041 DS board
 
@@ -254,6 +256,7 @@ config P4080_DS
 	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
+	select CORENET_GENERIC
 	help
 	  This option enables support for the P4080 DS board
 
@@ -278,6 +281,7 @@ config P5020_DS
 	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
+	select CORENET_GENERIC
 	help
 	  This option enables support for the P5020 DS board
 
@@ -292,6 +296,7 @@ config P5040_DS
 	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
+	select CORENET_GENERIC
 	help
 	  This option enables support for the P5040 DS board
 
@@ -323,6 +328,7 @@ config T4240_QDS
 	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
+	select CORENET_GENERIC
 	help
 	  This option enables support for the T4240 QDS board
 
@@ -337,6 +343,7 @@ config B4_QDS
 	select ARCH_REQUIRE_GPIOLIB
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
+	select CORENET_GENERIC
 	help
 	  This option enables support for the B4 QDS board
 	  The B4 application development system B4 QDS is a complete
@@ -348,3 +355,6 @@ endif # FSL_SOC_BOOKE
 
 config TQM85xx
 	bool
+
+config CORENET_GENERIC
+	bool
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 53c9f75a6907..a6c281d596e8 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -18,13 +18,7 @@ obj-$(CONFIG_P1010_RDB)   += p1010rdb.o
 obj-$(CONFIG_P1022_DS)    += p1022_ds.o
 obj-$(CONFIG_P1022_RDK)   += p1022_rdk.o
 obj-$(CONFIG_P1023_RDS)   += p1023_rds.o
-obj-$(CONFIG_P2041_RDB)   += p2041_rdb.o corenet_ds.o
-obj-$(CONFIG_P3041_DS)    += p3041_ds.o corenet_ds.o
-obj-$(CONFIG_P4080_DS)    += p4080_ds.o corenet_ds.o
-obj-$(CONFIG_P5020_DS)    += p5020_ds.o corenet_ds.o
-obj-$(CONFIG_P5040_DS)    += p5040_ds.o corenet_ds.o
-obj-$(CONFIG_T4240_QDS)   += t4240_qds.o corenet_ds.o
-obj-$(CONFIG_B4_QDS)	  += b4_qds.o corenet_ds.o
+obj-$(CONFIG_CORENET_GENERIC)   += corenet_ds.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
 obj-$(CONFIG_SBC8548)     += sbc8548.o
diff --git a/arch/powerpc/platforms/85xx/b4_qds.c b/arch/powerpc/platforms/85xx/b4_qds.c
deleted file mode 100644
index 0f18663f3a76..000000000000
--- a/arch/powerpc/platforms/85xx/b4_qds.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * B4 QDS Setup
- * Should apply for QDS platform of B4860 and it's personalities.
- * viz B4860/B4420/B4220QDS
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/phy.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-
-#include <linux/of_platform.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init b4_qds_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
-	extern struct smp_ops_t smp_85xx_ops;
-#endif
-
-	if ((of_flat_dt_is_compatible(root, "fsl,B4860QDS")) ||
-		(of_flat_dt_is_compatible(root, "fsl,B4420QDS")) ||
-			(of_flat_dt_is_compatible(root, "fsl,B4220QDS")))
-		return 1;
-
-	/* Check if we're running under the Freescale hypervisor */
-	if ((of_flat_dt_is_compatible(root, "fsl,B4860QDS-hv")) ||
-		(of_flat_dt_is_compatible(root, "fsl,B4420QDS-hv")) ||
-			(of_flat_dt_is_compatible(root, "fsl,B4220QDS-hv"))) {
-		ppc_md.init_IRQ = ehv_pic_init;
-		ppc_md.get_irq = ehv_pic_get_irq;
-		ppc_md.restart = fsl_hv_restart;
-		ppc_md.power_off = fsl_hv_halt;
-		ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
-		/*
-		 * Disable the timebase sync operations because we can't write
-		 * to the timebase registers under the hypervisor.
-		  */
-		smp_85xx_ops.give_timebase = NULL;
-		smp_85xx_ops.take_timebase = NULL;
-#endif
-		return 1;
-	}
-
-	return 0;
-}
-
-define_machine(b4_qds) {
-	.name			= "B4 QDS",
-	.probe			= b4_qds_probe,
-	.setup_arch		= corenet_ds_setup_arch,
-	.init_IRQ		= corenet_ds_pic_init,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-#endif
-	.get_irq		= mpic_get_coreint_irq,
-	.restart		= fsl_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-#ifdef CONFIG_PPC64
-	.power_save		= book3e_idle,
-#else
-	.power_save		= e500_idle,
-#endif
-};
-
-machine_arch_initcall(b4_qds, corenet_ds_publish_devices);
-
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(b4_qds, swiotlb_setup_bus_notifier);
-#endif
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c
index aa3690bae415..8e0285adeb45 100644
--- a/arch/powerpc/platforms/85xx/corenet_ds.c
+++ b/arch/powerpc/platforms/85xx/corenet_ds.c
@@ -25,6 +25,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/mpic.h>
+#include <asm/ehv_pic.h>
 
 #include <linux/of_platform.h>
 #include <sysdev/fsl_soc.h>
@@ -94,3 +95,88 @@ int __init corenet_ds_publish_devices(void)
 {
 	return of_platform_bus_probe(NULL, of_device_ids, NULL);
 }
+
+static const char * const boards[] __initconst = {
+	"fsl,P2041RDB",
+	"fsl,P3041DS",
+	"fsl,P4080DS",
+	"fsl,P5020DS",
+	"fsl,P5040DS",
+	"fsl,T4240QDS",
+	"fsl,B4860QDS",
+	"fsl,B4420QDS",
+	"fsl,B4220QDS",
+	NULL
+};
+
+static const char * const hv_boards[] __initconst = {
+	"fsl,P2041RDB-hv",
+	"fsl,P3041DS-hv",
+	"fsl,P4080DS-hv",
+	"fsl,P5020DS-hv",
+	"fsl,P5040DS-hv",
+	"fsl,T4240QDS-hv",
+	"fsl,B4860QDS-hv",
+	"fsl,B4420QDS-hv",
+	"fsl,B4220QDS-hv",
+	NULL
+};
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init corenet_generic_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+#ifdef CONFIG_SMP
+	extern struct smp_ops_t smp_85xx_ops;
+#endif
+
+	if (of_flat_dt_match(root, boards))
+		return 1;
+
+	/* Check if we're running under the Freescale hypervisor */
+	if (of_flat_dt_match(root, hv_boards)) {
+		ppc_md.init_IRQ = ehv_pic_init;
+		ppc_md.get_irq = ehv_pic_get_irq;
+		ppc_md.restart = fsl_hv_restart;
+		ppc_md.power_off = fsl_hv_halt;
+		ppc_md.halt = fsl_hv_halt;
+#ifdef CONFIG_SMP
+		/*
+		 * Disable the timebase sync operations because we can't write
+		 * to the timebase registers under the hypervisor.
+		  */
+		smp_85xx_ops.give_timebase = NULL;
+		smp_85xx_ops.take_timebase = NULL;
+#endif
+		return 1;
+	}
+
+	return 0;
+}
+
+define_machine(corenet_generic) {
+	.name			= "CoreNet Generic",
+	.probe			= corenet_generic_probe,
+	.setup_arch		= corenet_ds_setup_arch,
+	.init_IRQ		= corenet_ds_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_coreint_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+#ifdef CONFIG_PPC64
+	.power_save		= book3e_idle,
+#else
+	.power_save		= e500_idle,
+#endif
+};
+
+machine_arch_initcall(corenet_generic, corenet_ds_publish_devices);
+
+#ifdef CONFIG_SWIOTLB
+machine_arch_initcall(corenet_generic, swiotlb_setup_bus_notifier);
+#endif
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.h b/arch/powerpc/platforms/85xx/corenet_ds.h
deleted file mode 100644
index ddd700b23031..000000000000
--- a/arch/powerpc/platforms/85xx/corenet_ds.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Corenet based SoC DS Setup
- *
- * Copyright 2009 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef CORENET_DS_H
-#define CORENET_DS_H
-
-extern void __init corenet_ds_pic_init(void);
-extern void __init corenet_ds_setup_arch(void);
-extern int __init corenet_ds_publish_devices(void);
-
-#endif
diff --git a/arch/powerpc/platforms/85xx/p2041_rdb.c b/arch/powerpc/platforms/85xx/p2041_rdb.c
deleted file mode 100644
index 000c0892fc40..000000000000
--- a/arch/powerpc/platforms/85xx/p2041_rdb.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * P2041 RDB Setup
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/phy.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-
-#include <linux/of_platform.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init p2041_rdb_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
-	extern struct smp_ops_t smp_85xx_ops;
-#endif
-
-	if (of_flat_dt_is_compatible(root, "fsl,P2041RDB"))
-		return 1;
-
-	/* Check if we're running under the Freescale hypervisor */
-	if (of_flat_dt_is_compatible(root, "fsl,P2041RDB-hv")) {
-		ppc_md.init_IRQ = ehv_pic_init;
-		ppc_md.get_irq = ehv_pic_get_irq;
-		ppc_md.restart = fsl_hv_restart;
-		ppc_md.power_off = fsl_hv_halt;
-		ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
-		/*
-		 * Disable the timebase sync operations because we can't write
-		 * to the timebase registers under the hypervisor.
-		  */
-		smp_85xx_ops.give_timebase = NULL;
-		smp_85xx_ops.take_timebase = NULL;
-#endif
-		return 1;
-	}
-
-	return 0;
-}
-
-define_machine(p2041_rdb) {
-	.name			= "P2041 RDB",
-	.probe			= p2041_rdb_probe,
-	.setup_arch		= corenet_ds_setup_arch,
-	.init_IRQ		= corenet_ds_pic_init,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-#endif
-	.get_irq		= mpic_get_coreint_irq,
-	.restart		= fsl_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-	.power_save		= e500_idle,
-};
-
-machine_arch_initcall(p2041_rdb, corenet_ds_publish_devices);
-
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p2041_rdb, swiotlb_setup_bus_notifier);
-#endif
diff --git a/arch/powerpc/platforms/85xx/p3041_ds.c b/arch/powerpc/platforms/85xx/p3041_ds.c
deleted file mode 100644
index b3edc205daa9..000000000000
--- a/arch/powerpc/platforms/85xx/p3041_ds.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * P3041 DS Setup
- *
- * Maintained by Kumar Gala (see MAINTAINERS for contact information)
- *
- * Copyright 2009-2010 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/phy.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-
-#include <linux/of_platform.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init p3041_ds_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
-	extern struct smp_ops_t smp_85xx_ops;
-#endif
-
-	if (of_flat_dt_is_compatible(root, "fsl,P3041DS"))
-		return 1;
-
-	/* Check if we're running under the Freescale hypervisor */
-	if (of_flat_dt_is_compatible(root, "fsl,P3041DS-hv")) {
-		ppc_md.init_IRQ = ehv_pic_init;
-		ppc_md.get_irq = ehv_pic_get_irq;
-		ppc_md.restart = fsl_hv_restart;
-		ppc_md.power_off = fsl_hv_halt;
-		ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
-		/*
-		 * Disable the timebase sync operations because we can't write
-		 * to the timebase registers under the hypervisor.
-		  */
-		smp_85xx_ops.give_timebase = NULL;
-		smp_85xx_ops.take_timebase = NULL;
-#endif
-		return 1;
-	}
-
-	return 0;
-}
-
-define_machine(p3041_ds) {
-	.name			= "P3041 DS",
-	.probe			= p3041_ds_probe,
-	.setup_arch		= corenet_ds_setup_arch,
-	.init_IRQ		= corenet_ds_pic_init,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-#endif
-	.get_irq		= mpic_get_coreint_irq,
-	.restart		= fsl_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-	.power_save		= e500_idle,
-};
-
-machine_arch_initcall(p3041_ds, corenet_ds_publish_devices);
-
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p3041_ds, swiotlb_setup_bus_notifier);
-#endif
diff --git a/arch/powerpc/platforms/85xx/p4080_ds.c b/arch/powerpc/platforms/85xx/p4080_ds.c
deleted file mode 100644
index 54df10632aea..000000000000
--- a/arch/powerpc/platforms/85xx/p4080_ds.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * P4080 DS Setup
- *
- * Maintained by Kumar Gala (see MAINTAINERS for contact information)
- *
- * Copyright 2009 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-
-#include <linux/of_platform.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init p4080_ds_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
-	extern struct smp_ops_t smp_85xx_ops;
-#endif
-
-	if (of_flat_dt_is_compatible(root, "fsl,P4080DS"))
-		return 1;
-
-	/* Check if we're running under the Freescale hypervisor */
-	if (of_flat_dt_is_compatible(root, "fsl,P4080DS-hv")) {
-		ppc_md.init_IRQ = ehv_pic_init;
-		ppc_md.get_irq = ehv_pic_get_irq;
-		ppc_md.restart = fsl_hv_restart;
-		ppc_md.power_off = fsl_hv_halt;
-		ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
-		/*
-		 * Disable the timebase sync operations because we can't write
-		 * to the timebase registers under the hypervisor.
-		  */
-		smp_85xx_ops.give_timebase = NULL;
-		smp_85xx_ops.take_timebase = NULL;
-#endif
-		return 1;
-	}
-
-	return 0;
-}
-
-define_machine(p4080_ds) {
-	.name			= "P4080 DS",
-	.probe			= p4080_ds_probe,
-	.setup_arch		= corenet_ds_setup_arch,
-	.init_IRQ		= corenet_ds_pic_init,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-#endif
-	.get_irq		= mpic_get_coreint_irq,
-	.restart		= fsl_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-	.power_save		= e500_idle,
-};
-
-machine_arch_initcall(p4080_ds, corenet_ds_publish_devices);
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p4080_ds, swiotlb_setup_bus_notifier);
-#endif
diff --git a/arch/powerpc/platforms/85xx/p5020_ds.c b/arch/powerpc/platforms/85xx/p5020_ds.c
deleted file mode 100644
index 39cfa4044e6c..000000000000
--- a/arch/powerpc/platforms/85xx/p5020_ds.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * P5020 DS Setup
- *
- * Maintained by Kumar Gala (see MAINTAINERS for contact information)
- *
- * Copyright 2009-2010 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/phy.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-
-#include <linux/of_platform.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init p5020_ds_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
-	extern struct smp_ops_t smp_85xx_ops;
-#endif
-
-	if (of_flat_dt_is_compatible(root, "fsl,P5020DS"))
-		return 1;
-
-	/* Check if we're running under the Freescale hypervisor */
-	if (of_flat_dt_is_compatible(root, "fsl,P5020DS-hv")) {
-		ppc_md.init_IRQ = ehv_pic_init;
-		ppc_md.get_irq = ehv_pic_get_irq;
-		ppc_md.restart = fsl_hv_restart;
-		ppc_md.power_off = fsl_hv_halt;
-		ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
-		/*
-		 * Disable the timebase sync operations because we can't write
-		 * to the timebase registers under the hypervisor.
-		  */
-		smp_85xx_ops.give_timebase = NULL;
-		smp_85xx_ops.take_timebase = NULL;
-#endif
-		return 1;
-	}
-
-	return 0;
-}
-
-define_machine(p5020_ds) {
-	.name			= "P5020 DS",
-	.probe			= p5020_ds_probe,
-	.setup_arch		= corenet_ds_setup_arch,
-	.init_IRQ		= corenet_ds_pic_init,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-#endif
-	.get_irq		= mpic_get_coreint_irq,
-	.restart		= fsl_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-#ifdef CONFIG_PPC64
-	.power_save		= book3e_idle,
-#else
-	.power_save		= e500_idle,
-#endif
-};
-
-machine_arch_initcall(p5020_ds, corenet_ds_publish_devices);
-
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p5020_ds, swiotlb_setup_bus_notifier);
-#endif
diff --git a/arch/powerpc/platforms/85xx/p5040_ds.c b/arch/powerpc/platforms/85xx/p5040_ds.c
deleted file mode 100644
index f70e74cddf97..000000000000
--- a/arch/powerpc/platforms/85xx/p5040_ds.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * P5040 DS Setup
- *
- * Copyright 2009-2010 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-
-#include <asm/machdep.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-
-#include <linux/of_fdt.h>
-
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init p5040_ds_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
-	extern struct smp_ops_t smp_85xx_ops;
-#endif
-
-	if (of_flat_dt_is_compatible(root, "fsl,P5040DS"))
-		return 1;
-
-	/* Check if we're running under the Freescale hypervisor */
-	if (of_flat_dt_is_compatible(root, "fsl,P5040DS-hv")) {
-		ppc_md.init_IRQ = ehv_pic_init;
-		ppc_md.get_irq = ehv_pic_get_irq;
-		ppc_md.restart = fsl_hv_restart;
-		ppc_md.power_off = fsl_hv_halt;
-		ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
-		/*
-		 * Disable the timebase sync operations because we can't write
-		 * to the timebase registers under the hypervisor.
-		  */
-		smp_85xx_ops.give_timebase = NULL;
-		smp_85xx_ops.take_timebase = NULL;
-#endif
-		return 1;
-	}
-
-	return 0;
-}
-
-define_machine(p5040_ds) {
-	.name			= "P5040 DS",
-	.probe			= p5040_ds_probe,
-	.setup_arch		= corenet_ds_setup_arch,
-	.init_IRQ		= corenet_ds_pic_init,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-#endif
-	.get_irq		= mpic_get_coreint_irq,
-	.restart		= fsl_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-#ifdef CONFIG_PPC64
-	.power_save		= book3e_idle,
-#else
-	.power_save		= e500_idle,
-#endif
-};
-
-machine_arch_initcall(p5040_ds, corenet_ds_publish_devices);
-
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p5040_ds, swiotlb_setup_bus_notifier);
-#endif
diff --git a/arch/powerpc/platforms/85xx/t4240_qds.c b/arch/powerpc/platforms/85xx/t4240_qds.c
deleted file mode 100644
index 91ead6b1b8af..000000000000
--- a/arch/powerpc/platforms/85xx/t4240_qds.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * T4240 QDS Setup
- *
- * Maintained by Kumar Gala (see MAINTAINERS for contact information)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/phy.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-
-#include <linux/of_platform.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init t4240_qds_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
-	extern struct smp_ops_t smp_85xx_ops;
-#endif
-
-	if (of_flat_dt_is_compatible(root, "fsl,T4240QDS"))
-		return 1;
-
-	/* Check if we're running under the Freescale hypervisor */
-	if (of_flat_dt_is_compatible(root, "fsl,T4240QDS-hv")) {
-		ppc_md.init_IRQ = ehv_pic_init;
-		ppc_md.get_irq = ehv_pic_get_irq;
-		ppc_md.restart = fsl_hv_restart;
-		ppc_md.power_off = fsl_hv_halt;
-		ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
-		/*
-		 * Disable the timebase sync operations because we can't write
-		 * to the timebase registers under the hypervisor.
-		  */
-		smp_85xx_ops.give_timebase = NULL;
-		smp_85xx_ops.take_timebase = NULL;
-#endif
-		return 1;
-	}
-
-	return 0;
-}
-
-define_machine(t4240_qds) {
-	.name			= "T4240 QDS",
-	.probe			= t4240_qds_probe,
-	.setup_arch		= corenet_ds_setup_arch,
-	.init_IRQ		= corenet_ds_pic_init,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-#endif
-	.get_irq		= mpic_get_coreint_irq,
-	.restart		= fsl_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-#ifdef CONFIG_PPC64
-	.power_save		= book3e_idle,
-#else
-	.power_save		= e500_idle,
-#endif
-};
-
-machine_arch_initcall(t4240_qds, corenet_ds_publish_devices);
-
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(t4240_qds, swiotlb_setup_bus_notifier);
-#endif
-- 
cgit v1.2.3


From befe7c123ee4546316bb9aa9952c0e2f7c0d9c48 Mon Sep 17 00:00:00 2001
From: Kevin Hao
Date: Thu, 26 Sep 2013 09:42:27 +0800
Subject: powerpc/85xx: rename the corenet_ds.c to corenet_generic.c

This file is also used by some RDB and QDS boards. So the name seems
not so accurate. Rename it to corenet_generic.c. Also update the
function names in this file according to the change.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
---
 arch/powerpc/platforms/85xx/Makefile          |   2 +-
 arch/powerpc/platforms/85xx/corenet_ds.c      | 182 --------------------------
 arch/powerpc/platforms/85xx/corenet_generic.c | 182 ++++++++++++++++++++++++++
 3 files changed, 183 insertions(+), 183 deletions(-)
 delete mode 100644 arch/powerpc/platforms/85xx/corenet_ds.c
 create mode 100644 arch/powerpc/platforms/85xx/corenet_generic.c

(limited to 'arch')

diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index a6c281d596e8..dd4c0b59577b 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_P1010_RDB)   += p1010rdb.o
 obj-$(CONFIG_P1022_DS)    += p1022_ds.o
 obj-$(CONFIG_P1022_RDK)   += p1022_rdk.o
 obj-$(CONFIG_P1023_RDS)   += p1023_rds.o
-obj-$(CONFIG_CORENET_GENERIC)   += corenet_ds.o
+obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
 obj-$(CONFIG_SBC8548)     += sbc8548.o
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c
deleted file mode 100644
index 8e0285adeb45..000000000000
--- a/arch/powerpc/platforms/85xx/corenet_ds.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * Corenet based SoC DS Setup
- *
- * Maintained by Kumar Gala (see MAINTAINERS for contact information)
- *
- * Copyright 2009-2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc-pci.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-#include <asm/ehv_pic.h>
-
-#include <linux/of_platform.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include "smp.h"
-
-void __init corenet_ds_pic_init(void)
-{
-	struct mpic *mpic;
-	unsigned int flags = MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU |
-		MPIC_NO_RESET;
-
-	if (ppc_md.get_irq == mpic_get_coreint_irq)
-		flags |= MPIC_ENABLE_COREINT;
-
-	mpic = mpic_alloc(NULL, 0, flags, 0, 512, " OpenPIC  ");
-	BUG_ON(mpic == NULL);
-
-	mpic_init(mpic);
-}
-
-/*
- * Setup the architecture
- */
-void __init corenet_ds_setup_arch(void)
-{
-	mpc85xx_smp_init();
-
-	swiotlb_detect_4g();
-
-	pr_info("%s board from Freescale Semiconductor\n", ppc_md.name);
-}
-
-static const struct of_device_id of_device_ids[] = {
-	{
-		.compatible	= "simple-bus"
-	},
-	{
-		.compatible	= "fsl,srio",
-	},
-	{
-		.compatible	= "fsl,p4080-pcie",
-	},
-	{
-		.compatible	= "fsl,qoriq-pcie-v2.2",
-	},
-	{
-		.compatible	= "fsl,qoriq-pcie-v2.3",
-	},
-	{
-		.compatible	= "fsl,qoriq-pcie-v2.4",
-	},
-	{
-		.compatible	= "fsl,qoriq-pcie-v3.0",
-	},
-	/* The following two are for the Freescale hypervisor */
-	{
-		.name		= "hypervisor",
-	},
-	{
-		.name		= "handles",
-	},
-	{}
-};
-
-int __init corenet_ds_publish_devices(void)
-{
-	return of_platform_bus_probe(NULL, of_device_ids, NULL);
-}
-
-static const char * const boards[] __initconst = {
-	"fsl,P2041RDB",
-	"fsl,P3041DS",
-	"fsl,P4080DS",
-	"fsl,P5020DS",
-	"fsl,P5040DS",
-	"fsl,T4240QDS",
-	"fsl,B4860QDS",
-	"fsl,B4420QDS",
-	"fsl,B4220QDS",
-	NULL
-};
-
-static const char * const hv_boards[] __initconst = {
-	"fsl,P2041RDB-hv",
-	"fsl,P3041DS-hv",
-	"fsl,P4080DS-hv",
-	"fsl,P5020DS-hv",
-	"fsl,P5040DS-hv",
-	"fsl,T4240QDS-hv",
-	"fsl,B4860QDS-hv",
-	"fsl,B4420QDS-hv",
-	"fsl,B4220QDS-hv",
-	NULL
-};
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init corenet_generic_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
-	extern struct smp_ops_t smp_85xx_ops;
-#endif
-
-	if (of_flat_dt_match(root, boards))
-		return 1;
-
-	/* Check if we're running under the Freescale hypervisor */
-	if (of_flat_dt_match(root, hv_boards)) {
-		ppc_md.init_IRQ = ehv_pic_init;
-		ppc_md.get_irq = ehv_pic_get_irq;
-		ppc_md.restart = fsl_hv_restart;
-		ppc_md.power_off = fsl_hv_halt;
-		ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
-		/*
-		 * Disable the timebase sync operations because we can't write
-		 * to the timebase registers under the hypervisor.
-		  */
-		smp_85xx_ops.give_timebase = NULL;
-		smp_85xx_ops.take_timebase = NULL;
-#endif
-		return 1;
-	}
-
-	return 0;
-}
-
-define_machine(corenet_generic) {
-	.name			= "CoreNet Generic",
-	.probe			= corenet_generic_probe,
-	.setup_arch		= corenet_ds_setup_arch,
-	.init_IRQ		= corenet_ds_pic_init,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-#endif
-	.get_irq		= mpic_get_coreint_irq,
-	.restart		= fsl_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-#ifdef CONFIG_PPC64
-	.power_save		= book3e_idle,
-#else
-	.power_save		= e500_idle,
-#endif
-};
-
-machine_arch_initcall(corenet_generic, corenet_ds_publish_devices);
-
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(corenet_generic, swiotlb_setup_bus_notifier);
-#endif
diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
new file mode 100644
index 000000000000..fbd871e69754
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -0,0 +1,182 @@
+/*
+ * Corenet based SoC DS Setup
+ *
+ * Maintained by Kumar Gala (see MAINTAINERS for contact information)
+ *
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <asm/ehv_pic.h>
+
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+void __init corenet_gen_pic_init(void)
+{
+	struct mpic *mpic;
+	unsigned int flags = MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU |
+		MPIC_NO_RESET;
+
+	if (ppc_md.get_irq == mpic_get_coreint_irq)
+		flags |= MPIC_ENABLE_COREINT;
+
+	mpic = mpic_alloc(NULL, 0, flags, 0, 512, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+
+	mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+void __init corenet_gen_setup_arch(void)
+{
+	mpc85xx_smp_init();
+
+	swiotlb_detect_4g();
+
+	pr_info("%s board from Freescale Semiconductor\n", ppc_md.name);
+}
+
+static const struct of_device_id of_device_ids[] = {
+	{
+		.compatible	= "simple-bus"
+	},
+	{
+		.compatible	= "fsl,srio",
+	},
+	{
+		.compatible	= "fsl,p4080-pcie",
+	},
+	{
+		.compatible	= "fsl,qoriq-pcie-v2.2",
+	},
+	{
+		.compatible	= "fsl,qoriq-pcie-v2.3",
+	},
+	{
+		.compatible	= "fsl,qoriq-pcie-v2.4",
+	},
+	{
+		.compatible	= "fsl,qoriq-pcie-v3.0",
+	},
+	/* The following two are for the Freescale hypervisor */
+	{
+		.name		= "hypervisor",
+	},
+	{
+		.name		= "handles",
+	},
+	{}
+};
+
+int __init corenet_gen_publish_devices(void)
+{
+	return of_platform_bus_probe(NULL, of_device_ids, NULL);
+}
+
+static const char * const boards[] __initconst = {
+	"fsl,P2041RDB",
+	"fsl,P3041DS",
+	"fsl,P4080DS",
+	"fsl,P5020DS",
+	"fsl,P5040DS",
+	"fsl,T4240QDS",
+	"fsl,B4860QDS",
+	"fsl,B4420QDS",
+	"fsl,B4220QDS",
+	NULL
+};
+
+static const char * const hv_boards[] __initconst = {
+	"fsl,P2041RDB-hv",
+	"fsl,P3041DS-hv",
+	"fsl,P4080DS-hv",
+	"fsl,P5020DS-hv",
+	"fsl,P5040DS-hv",
+	"fsl,T4240QDS-hv",
+	"fsl,B4860QDS-hv",
+	"fsl,B4420QDS-hv",
+	"fsl,B4220QDS-hv",
+	NULL
+};
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init corenet_generic_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+#ifdef CONFIG_SMP
+	extern struct smp_ops_t smp_85xx_ops;
+#endif
+
+	if (of_flat_dt_match(root, boards))
+		return 1;
+
+	/* Check if we're running under the Freescale hypervisor */
+	if (of_flat_dt_match(root, hv_boards)) {
+		ppc_md.init_IRQ = ehv_pic_init;
+		ppc_md.get_irq = ehv_pic_get_irq;
+		ppc_md.restart = fsl_hv_restart;
+		ppc_md.power_off = fsl_hv_halt;
+		ppc_md.halt = fsl_hv_halt;
+#ifdef CONFIG_SMP
+		/*
+		 * Disable the timebase sync operations because we can't write
+		 * to the timebase registers under the hypervisor.
+		  */
+		smp_85xx_ops.give_timebase = NULL;
+		smp_85xx_ops.take_timebase = NULL;
+#endif
+		return 1;
+	}
+
+	return 0;
+}
+
+define_machine(corenet_generic) {
+	.name			= "CoreNet Generic",
+	.probe			= corenet_generic_probe,
+	.setup_arch		= corenet_gen_setup_arch,
+	.init_IRQ		= corenet_gen_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_coreint_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+#ifdef CONFIG_PPC64
+	.power_save		= book3e_idle,
+#else
+	.power_save		= e500_idle,
+#endif
+};
+
+machine_arch_initcall(corenet_generic, corenet_gen_publish_devices);
+
+#ifdef CONFIG_SWIOTLB
+machine_arch_initcall(corenet_generic, swiotlb_setup_bus_notifier);
+#endif
-- 
cgit v1.2.3


From 9e0967572e5a0e8c887b2d71192bdad342e8a3dd Mon Sep 17 00:00:00 2001
From: Kevin Hao
Date: Thu, 26 Sep 2013 09:42:28 +0800
Subject: powerpc/85xx: use one kernel option for all the CoreNet_Generic
 boards

Currently all these boards use the same machine struct and also select
the same kernel options, so it seems a bit of redundant to keep one
separate kernel option for each board. Also update the defconfigs
according to this change.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/configs/corenet32_smp_defconfig |   6 +-
 arch/powerpc/configs/corenet64_smp_defconfig |   5 +-
 arch/powerpc/configs/ppc64e_defconfig        |   2 +-
 arch/powerpc/platforms/85xx/Kconfig          | 111 +++------------------------
 4 files changed, 13 insertions(+), 111 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index 71bc43ab649a..bbd794deb6eb 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -23,11 +23,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
-CONFIG_P2041_RDB=y
-CONFIG_P3041_DS=y
-CONFIG_P4080_DS=y
-CONFIG_P5020_DS=y
-CONFIG_P5040_DS=y
+CONFIG_CORENET_GENERIC=y
 CONFIG_HIGHMEM=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
index fa94fb3bb44d..63508ddee11c 100644
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ b/arch/powerpc/configs/corenet64_smp_defconfig
@@ -21,10 +21,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
-CONFIG_B4_QDS=y
-CONFIG_P5020_DS=y
-CONFIG_P5040_DS=y
-CONFIG_T4240_QDS=y
+CONFIG_CORENET_GENERIC=y
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
index 0085dc4642c5..0a6be6dd6003 100644
--- a/arch/powerpc/configs/ppc64e_defconfig
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -23,7 +23,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
 CONFIG_EFI_PARTITION=y
-CONFIG_P5020_DS=y
+CONFIG_CORENET_GENERIC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 3bee94398ec3..4d4634958cfb 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -218,88 +218,16 @@ config GE_IMP3A
 	  This board is a 3U CompactPCI Single Board Computer with a Freescale
 	  P2020 processor.
 
-config P2041_RDB
-	bool "Freescale P2041 RDB"
-	select DEFAULT_UIMAGE
-	select PPC_E500MC
-	select PHYS_64BIT
-	select SWIOTLB
-	select ARCH_REQUIRE_GPIOLIB
-	select GPIO_MPC8XXX
-	select HAS_RAPIDIO
-	select PPC_EPAPR_HV_PIC
-	select CORENET_GENERIC
-	help
-	  This option enables support for the P2041 RDB board
-
-config P3041_DS
-	bool "Freescale P3041 DS"
-	select DEFAULT_UIMAGE
-	select PPC_E500MC
-	select PHYS_64BIT
-	select SWIOTLB
-	select ARCH_REQUIRE_GPIOLIB
-	select GPIO_MPC8XXX
-	select HAS_RAPIDIO
-	select PPC_EPAPR_HV_PIC
-	select CORENET_GENERIC
-	help
-	  This option enables support for the P3041 DS board
-
-config P4080_DS
-	bool "Freescale P4080 DS"
-	select DEFAULT_UIMAGE
-	select PPC_E500MC
-	select PHYS_64BIT
-	select SWIOTLB
-	select ARCH_REQUIRE_GPIOLIB
-	select GPIO_MPC8XXX
-	select HAS_RAPIDIO
-	select PPC_EPAPR_HV_PIC
-	select CORENET_GENERIC
-	help
-	  This option enables support for the P4080 DS board
-
 config SGY_CTS1000
 	tristate "Servergy CTS-1000 support"
 	select GPIOLIB
 	select OF_GPIO
-	depends on P4080_DS
+	depends on CORENET_GENERIC
 	help
 	  Enable this to support functionality in Servergy's CTS-1000 systems.
 
 endif # PPC32
 
-config P5020_DS
-	bool "Freescale P5020 DS"
-	select DEFAULT_UIMAGE
-	select E500
-	select PPC_E500MC
-	select PHYS_64BIT
-	select SWIOTLB
-	select ARCH_REQUIRE_GPIOLIB
-	select GPIO_MPC8XXX
-	select HAS_RAPIDIO
-	select PPC_EPAPR_HV_PIC
-	select CORENET_GENERIC
-	help
-	  This option enables support for the P5020 DS board
-
-config P5040_DS
-	bool "Freescale P5040 DS"
-	select DEFAULT_UIMAGE
-	select E500
-	select PPC_E500MC
-	select PHYS_64BIT
-	select SWIOTLB
-	select ARCH_REQUIRE_GPIOLIB
-	select GPIO_MPC8XXX
-	select HAS_RAPIDIO
-	select PPC_EPAPR_HV_PIC
-	select CORENET_GENERIC
-	help
-	  This option enables support for the P5040 DS board
-
 config PPC_QEMU_E500
 	bool "QEMU generic e500 platform"
 	select DEFAULT_UIMAGE
@@ -315,10 +243,8 @@ config PPC_QEMU_E500
 	  unset based on the emulated CPU (or actual host CPU in the case
 	  of KVM).
 
-if PPC64
-
-config T4240_QDS
-	bool "Freescale T4240 QDS"
+config CORENET_GENERIC
+	bool "Freescale CoreNet Generic"
 	select DEFAULT_UIMAGE
 	select E500
 	select PPC_E500MC
@@ -328,33 +254,16 @@ config T4240_QDS
 	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
-	select CORENET_GENERIC
 	help
-	  This option enables support for the T4240 QDS board
+	  This option enables support for the FSL CoreNet based boards.
+	  For 32bit kernel, the following boards are supported:
+	    P2041 RDB, P3041 DS and P4080 DS
+	  For 64bit kernel, the following boards are supported:
+	    T4240 QDS and B4 QDS
+	  The following boards are supported for both 32bit and 64bit kernel:
+	    P5020 DS and P5040 DS
 
-config B4_QDS
-	bool "Freescale B4 QDS"
-	select DEFAULT_UIMAGE
-	select E500
-	select PPC_E500MC
-	select PHYS_64BIT
-	select SWIOTLB
-	select GPIOLIB
-	select ARCH_REQUIRE_GPIOLIB
-	select HAS_RAPIDIO
-	select PPC_EPAPR_HV_PIC
-	select CORENET_GENERIC
-	help
-	  This option enables support for the B4 QDS board
-	  The B4 application development system B4 QDS is a complete
-	  debugging environment intended for engineers developing
-	  applications for the B4.
-
-endif
 endif # FSL_SOC_BOOKE
 
 config TQM85xx
 	bool
-
-config CORENET_GENERIC
-	bool
-- 
cgit v1.2.3


From 4e591f3c0a618b8230a37bfff64b59e76374f2e5 Mon Sep 17 00:00:00 2001
From: LEROY Christophe
Date: Tue, 24 Sep 2013 10:18:39 +0200
Subject: powerpc/8xx: Fixing issue with CONFIG_PIN_TLB

Activating CONFIG_PIN_TLB is supposed to pin the IMMR and the first
three 8Mbytes pages.  But the setting of MD_CTR to a pinnable entry was
missing before the pinning of the third 8Mb page.  As the index is
decremented module 28 (MD_RSV4D is set) after every DTLB update, the
third 8Mbytes page was not pinned.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/head_8xx.S | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 1b92a97b1b04..7ee876d2adb5 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -858,6 +858,9 @@ initial_mmu:
 	addis	r11, r11, 0x0080	/* Add 8M */
 	mtspr	SPRN_MD_RPN, r11
 
+	addi	r10, r10, 0x0100
+	mtspr	SPRN_MD_CTR, r10
+
 	addis	r8, r8, 0x0080		/* Add 8M */
 	mtspr	SPRN_MD_EPN, r8
 	mtspr	SPRN_MD_TWC, r9
-- 
cgit v1.2.3


From 5f2da0f1e8fb074482118f04d0db0614951c3bb8 Mon Sep 17 00:00:00 2001
From: LEROY Christophe
Date: Fri, 11 Oct 2013 14:56:40 +0200
Subject: powerpc/8xx: Fixing memory init issue with CONFIG_PIN_TLB

Activating CONFIG_PIN_TLB allows access to the 24 first Mbytes of
memory at bootup instead of 8.  It is needed for "big" kernels for
instance when activating CONFIG_LOCKDEP_SUPPORT.  This needs to be
taken into account in init_32 too, otherwise memory allocation soon
fails after startup.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/mm/init_32.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index d47d3dab4870..cff59f1bec23 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -213,7 +213,12 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 	 */
 	BUG_ON(first_memblock_base != 0);
 
+#ifdef CONFIG_PIN_TLB
+	/* 8xx can only access 24MB at the moment */
+	memblock_set_current_limit(min_t(u64, first_memblock_size, 0x01800000));
+#else
 	/* 8xx can only access 8MB at the moment */
 	memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000));
+#endif
 }
 #endif /* CONFIG_8xx */
-- 
cgit v1.2.3


From 8d7c0b527fba4891e5d8c74d78e80cac177bce5e Mon Sep 17 00:00:00 2001
From: Wei Yongjun
Date: Sat, 12 Oct 2013 15:13:19 +0800
Subject: powerpc/6xx: add missing iounmap() on error in hlwd_pic_init()

Add the missing iounmap() before return from hlwd_pic_init()
in the error handling case.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/platforms/embedded6xx/hlwd-pic.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
index 3006b5117ec6..6f61e21b3617 100644
--- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
+++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
@@ -181,6 +181,7 @@ struct irq_domain *hlwd_pic_init(struct device_node *np)
 					   &hlwd_irq_domain_ops, io_base);
 	if (!irq_domain) {
 		pr_err("failed to allocate irq_domain\n");
+		iounmap(io_base);
 		return NULL;
 	}
 
-- 
cgit v1.2.3


From d82341b08b8105965267252b51c41fb35fc81156 Mon Sep 17 00:00:00 2001
From: Wolfram Sang
Date: Sun, 13 Oct 2013 18:05:38 +0200
Subject: arch/powerpc/platforms/83xx: Remove obsolete cleanup for clientdata

A few new i2c-drivers came into the kernel which clear the clientdata-pointer
on exit or error. This is obsolete meanwhile, the core will do it.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
index 7bc315822935..fd71cfdf2380 100644
--- a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
+++ b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
@@ -204,7 +204,6 @@ static int mcu_remove(struct i2c_client *client)
 	ret = mcu_gpiochip_remove(mcu);
 	if (ret)
 		return ret;
-	i2c_set_clientdata(client, NULL);
 	kfree(mcu);
 	return 0;
 }
-- 
cgit v1.2.3


From fd1348d098b5d0f633c869b50a74cfcbeb9834f5 Mon Sep 17 00:00:00 2001
From: Zhao Qiang
Date: Mon, 14 Oct 2013 14:46:13 +0800
Subject: powerpc/p1010rdb: add P1010RDB-PB platform support

The P1010RDB-PB is similar to P1010RDB(P1010RDB-PA).
So, P1010RDB-PB use the same platform file as P1010RDB.
Then Add support for P1010RDB-PB platform.

Signed-off-by: Zhao Qiang <B45475@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/platforms/85xx/p1010rdb.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/85xx/p1010rdb.c b/arch/powerpc/platforms/85xx/p1010rdb.c
index 0252961392d5..d6a3dd311494 100644
--- a/arch/powerpc/platforms/85xx/p1010rdb.c
+++ b/arch/powerpc/platforms/85xx/p1010rdb.c
@@ -66,6 +66,8 @@ static int __init p1010_rdb_probe(void)
 
 	if (of_flat_dt_is_compatible(root, "fsl,P1010RDB"))
 		return 1;
+	if (of_flat_dt_is_compatible(root, "fsl,P1010RDB-PB"))
+		return 1;
 	return 0;
 }
 
-- 
cgit v1.2.3


From dde8e3ee6b37fa33690604302bebfe7b576c3802 Mon Sep 17 00:00:00 2001
From: Wei Yongjun
Date: Fri, 25 Oct 2013 17:30:24 +0800
Subject: powerpc/mv643xx_eth: fix return check in
 mv64x60_eth_register_shared_pdev()

In case of error, the function platform_device_register_simple() returns
RR_PTR() and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/sysdev/mv64x60_dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c
index 4a25c26f0bf4..a3a8fad8537d 100644
--- a/arch/powerpc/sysdev/mv64x60_dev.c
+++ b/arch/powerpc/sysdev/mv64x60_dev.c
@@ -228,7 +228,7 @@ static struct platform_device * __init mv64x60_eth_register_shared_pdev(
 
 	if (id == 0) {
 		pdev = platform_device_register_simple("orion-mdio", -1, &r[1], 1);
-		if (!pdev)
+		if (IS_ERR(pdev))
 			return pdev;
 	}
 
-- 
cgit v1.2.3


From b60c5a7a82cdfec2221263ce259faa4a36696163 Mon Sep 17 00:00:00 2001
From: Christian Kujau
Date: Mon, 28 Oct 2013 05:51:36 -0700
Subject: powerpc/6xx: CONFIG_MCU_MPC8349EMITX cannot be a module

During "make ppc6xx_defconfig" the following happens:

  HOSTCC  scripts/basic/fixdep
  GEN     /usr/local/src/tmp/lnx/Makefile
  HOSTCC  scripts/kconfig/conf.o
  HOSTCC  scripts/kconfig/zconf.tab.o
  HOSTLD  scripts/kconfig/conf
arch/powerpc/configs/ppc6xx_defconfig:74:warning: symbol value 'm' invalid for MCU_MPC8349EMITX

Setting CONFIG_MCU_MPC8349EMITX=y in ppc6xx_defconfig makes the warning
go away. This too has been reported by Geert Uytterhoeven a long time ago:
https://lkml.org/lkml/2011/11/13/11  - I only came across this because I
needed a "clean" defconfig for this Powerbook G5.

Signed-off-by: Christian Kujau <lists@nerdbynature.de>
[scottwood@freescale.com: cleaned up commit message slightly]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/configs/ppc6xx_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 20ebfaf7234b..c2353bf059fd 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -71,7 +71,7 @@ CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_PPC_BESTCOMM=y
 CONFIG_GPIO_MPC8XXX=y
-CONFIG_MCU_MPC8349EMITX=m
+CONFIG_MCU_MPC8349EMITX=y
 CONFIG_HIGHMEM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-- 
cgit v1.2.3


From a3821b2af185b64e3382c45fbdaa2cbc91ce14b8 Mon Sep 17 00:00:00 2001
From: Scott Wood
Date: Mon, 28 Oct 2013 22:07:59 -0500
Subject: powerpc: Fix PPC_EMULATED_STATS build break with sync patch

Commit 9863c28a2af90a56c088f5f6288d7f6d2c923c14 ("powerpc: Emulate sync
instruction variants") introduced a build breakage with
CONFIG_PPC_EMULATED_STATS enabled.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Kumar Gala <galak@kernel.org>
Cc: James Yang <James.Yang@freescale.com>
---
---
 arch/powerpc/include/asm/emulated_ops.h | 1 +
 arch/powerpc/kernel/traps.c             | 1 +
 2 files changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/emulated_ops.h b/arch/powerpc/include/asm/emulated_ops.h
index 5a8b82aa7241..4358e3002f35 100644
--- a/arch/powerpc/include/asm/emulated_ops.h
+++ b/arch/powerpc/include/asm/emulated_ops.h
@@ -43,6 +43,7 @@ extern struct ppc_emulated {
 	struct ppc_emulated_entry popcntb;
 	struct ppc_emulated_entry spe;
 	struct ppc_emulated_entry string;
+	struct ppc_emulated_entry sync;
 	struct ppc_emulated_entry unaligned;
 #ifdef CONFIG_MATH_EMULATION
 	struct ppc_emulated_entry math;
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index ad20dcfaedd0..62c3dd8c69f2 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1820,6 +1820,7 @@ struct ppc_emulated ppc_emulated = {
 	WARN_EMULATED_SETUP(popcntb),
 	WARN_EMULATED_SETUP(spe),
 	WARN_EMULATED_SETUP(string),
+	WARN_EMULATED_SETUP(sync),
 	WARN_EMULATED_SETUP(unaligned),
 #ifdef CONFIG_MATH_EMULATION
 	WARN_EMULATED_SETUP(math),
-- 
cgit v1.2.3


From e00b12e64be9a34ef071de7b6052ca9ea29dd460 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra
Date: Thu, 24 Oct 2013 12:52:06 +0200
Subject: perf/x86: Further optimize copy_from_user_nmi()

Now that we can deal with nested NMI due to IRET re-enabling NMIs and
can deal with faults from NMI by making sure we preserve CR2 over NMIs
we can in fact simply access user-space memory from NMI context.

So rewrite copy_from_user_nmi() to use __copy_from_user_inatomic() and
rework the fault path to do the minimal required work before taking
the in_atomic() fault handler.

In particular avoid perf_sw_event() which would make perf recurse on
itself (it should be harmless as our recursion protections should be
able to deal with this -- but why tempt fate).

Also rename notify_page_fault() to kprobes_fault() as that is a much
better name; there is no notifier in it and its specific to kprobes.

Don measured that his worst case NMI path shrunk from ~300K cycles to
~150K cycles.

Cc: Stephane Eranian <eranian@google.com>
Cc: jmario@redhat.com
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: dave.hansen@linux.intel.com
Tested-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131024105206.GM2490@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/lib/usercopy.c | 43 +++++++++++++++----------------------------
 arch/x86/mm/fault.c     | 41 +++++++++++++++++++++--------------------
 2 files changed, 36 insertions(+), 48 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/lib/usercopy.c b/arch/x86/lib/usercopy.c
index 4f74d94c8d97..5465b8613944 100644
--- a/arch/x86/lib/usercopy.c
+++ b/arch/x86/lib/usercopy.c
@@ -11,39 +11,26 @@
 #include <linux/sched.h>
 
 /*
- * best effort, GUP based copy_from_user() that is NMI-safe
+ * We rely on the nested NMI work to allow atomic faults from the NMI path; the
+ * nested NMI paths are careful to preserve CR2.
  */
 unsigned long
 copy_from_user_nmi(void *to, const void __user *from, unsigned long n)
 {
-	unsigned long offset, addr = (unsigned long)from;
-	unsigned long size, len = 0;
-	struct page *page;
-	void *map;
-	int ret;
+	unsigned long ret;
 
 	if (__range_not_ok(from, n, TASK_SIZE))
-		return len;
-
-	do {
-		ret = __get_user_pages_fast(addr, 1, 0, &page);
-		if (!ret)
-			break;
-
-		offset = addr & (PAGE_SIZE - 1);
-		size = min(PAGE_SIZE - offset, n - len);
-
-		map = kmap_atomic(page);
-		memcpy(to, map+offset, size);
-		kunmap_atomic(map);
-		put_page(page);
-
-		len  += size;
-		to   += size;
-		addr += size;
-
-	} while (len < n);
-
-	return len;
+		return 0;
+
+	/*
+	 * Even though this function is typically called from NMI/IRQ context
+	 * disable pagefaults so that its behaviour is consistent even when
+	 * called form other contexts.
+	 */
+	pagefault_disable();
+	ret = __copy_from_user_inatomic(to, from, n);
+	pagefault_enable();
+
+	return n - ret;
 }
 EXPORT_SYMBOL_GPL(copy_from_user_nmi);
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 3aaeffcfd67a..7a517bb41060 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -51,7 +51,7 @@ kmmio_fault(struct pt_regs *regs, unsigned long addr)
 	return 0;
 }
 
-static inline int __kprobes notify_page_fault(struct pt_regs *regs)
+static inline int __kprobes kprobes_fault(struct pt_regs *regs)
 {
 	int ret = 0;
 
@@ -1048,7 +1048,7 @@ __do_page_fault(struct pt_regs *regs, unsigned long error_code)
 			return;
 
 		/* kprobes don't want to hook the spurious faults: */
-		if (notify_page_fault(regs))
+		if (kprobes_fault(regs))
 			return;
 		/*
 		 * Don't take the mm semaphore here. If we fixup a prefetch
@@ -1060,23 +1060,8 @@ __do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	}
 
 	/* kprobes don't want to hook the spurious faults: */
-	if (unlikely(notify_page_fault(regs)))
+	if (unlikely(kprobes_fault(regs)))
 		return;
-	/*
-	 * It's safe to allow irq's after cr2 has been saved and the
-	 * vmalloc fault has been handled.
-	 *
-	 * User-mode registers count as a user access even for any
-	 * potential system fault or CPU buglet:
-	 */
-	if (user_mode_vm(regs)) {
-		local_irq_enable();
-		error_code |= PF_USER;
-		flags |= FAULT_FLAG_USER;
-	} else {
-		if (regs->flags & X86_EFLAGS_IF)
-			local_irq_enable();
-	}
 
 	if (unlikely(error_code & PF_RSVD))
 		pgtable_bad(regs, error_code, address);
@@ -1088,8 +1073,6 @@ __do_page_fault(struct pt_regs *regs, unsigned long error_code)
 		}
 	}
 
-	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
-
 	/*
 	 * If we're in an interrupt, have no user context or are running
 	 * in an atomic region then we must not take the fault:
@@ -1099,6 +1082,24 @@ __do_page_fault(struct pt_regs *regs, unsigned long error_code)
 		return;
 	}
 
+	/*
+	 * It's safe to allow irq's after cr2 has been saved and the
+	 * vmalloc fault has been handled.
+	 *
+	 * User-mode registers count as a user access even for any
+	 * potential system fault or CPU buglet:
+	 */
+	if (user_mode_vm(regs)) {
+		local_irq_enable();
+		error_code |= PF_USER;
+		flags |= FAULT_FLAG_USER;
+	} else {
+		if (regs->flags & X86_EFLAGS_IF)
+			local_irq_enable();
+	}
+
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
+
 	if (error_code & PF_WRITE)
 		flags |= FAULT_FLAG_WRITE;
 
-- 
cgit v1.2.3


From 1400b4204ca334bb67be5b091b45214b57912b33 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell
Date: Mon, 28 Oct 2013 19:34:41 +1100
Subject: powerpc: Add includes to fix powernv/rng.c build

Caused by commit a4da0d50b2a0 ("powerpc: Implement
arch_get_random_long/int() for powernv") from the powerpc tree
interacting with commit b5b4bb3f6a11 ("of: only include prom.h on sparc")
from the dt-rh tree.

I added this merge fix patch (which will need to be sent to Linus when
these two trees get merged, or could be applied now to the powerpc tree):

[ Also add linux/smp.h to get cpu_to_chip_id -- BenH ]

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powernv/rng.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/rng.c b/arch/powerpc/platforms/powernv/rng.c
index 02db7d73cf8b..8844628915dc 100644
--- a/arch/powerpc/platforms/powernv/rng.c
+++ b/arch/powerpc/platforms/powernv/rng.c
@@ -11,10 +11,13 @@
 
 #include <linux/kernel.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
+#include <linux/smp.h>
 #include <asm/archrandom.h>
 #include <asm/io.h>
+#include <asm/prom.h>
 #include <asm/machdep.h>
 
 
-- 
cgit v1.2.3


From f5467e28d4e2569b2c71435d438ce3c7f9ac238e Mon Sep 17 00:00:00 2001
From: Paul Mackerras
Date: Tue, 29 Oct 2013 16:21:26 +1100
Subject: powerpc/boot: Don't change link address for OF-based platforms

Commit c55aef0e5bc6 ("powerpc/boot: Change the load address for the
wrapper to fit the kernel") adjusts the wrapper address unnecessarily
for platforms that use arch/powerpc/boot/of.c, since the code there
allocates space for the kernel wherever it can find it and doesn't
necessarily load the kernel at address 0.  Changing the link address
is actually harmful since it can cause the zImage to overlap with
Open Firmware and thus fail to boot.

To fix this, we set make_space to n for all of the platforms that
use of.o.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/wrapper | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index cd7af841ba05..ac16e9984ecb 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -150,18 +150,22 @@ case "$platform" in
 pseries)
     platformo="$object/of.o $object/epapr.o"
     link_address='0x4000000'
+    make_space=n
     ;;
 maple)
     platformo="$object/of.o $object/epapr.o"
     link_address='0x400000'
+    make_space=n
     ;;
 pmac|chrp)
     platformo="$object/of.o $object/epapr.o"
+    make_space=n
     ;;
 coff)
     platformo="$object/crt0.o $object/of.o $object/epapr.o"
     lds=$object/zImage.coff.lds
     link_address='0x500000'
+    make_space=n
     pie=
     ;;
 miboot|uboot*)
-- 
cgit v1.2.3


From ec32dd663da29d0e2e3ca964d6a94c683a6582a9 Mon Sep 17 00:00:00 2001
From: Robert Jennings
Date: Mon, 28 Oct 2013 09:20:50 -0500
Subject: powerpc: Fix warnings for arch/powerpc/mm/numa.c

Simple fixes for sparse warnings in this file.

Resolves:
arch/powerpc/mm/numa.c:198:24:
        warning: Using plain integer as NULL pointer

arch/powerpc/mm/numa.c:1157:5:
       warning: symbol 'hot_add_node_scn_to_nid' was not declared.
                Should it be static?

arch/powerpc/mm/numa.c:1238:28:
       warning: Using plain integer as NULL pointer

arch/powerpc/mm/numa.c:1538:6:
       warning: symbol 'topology_schedule_update' was not declared.
                Should it be static?

Signed-off-by: Robert C Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/numa.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index c916127f10c3..33d67844062c 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -195,7 +195,7 @@ static const __be32 *of_get_usable_memory(struct device_node *memory)
 	u32 len;
 	prop = of_get_property(memory, "linux,drconf-usable-memory", &len);
 	if (!prop || len < sizeof(unsigned int))
-		return 0;
+		return NULL;
 	return prop;
 }
 
@@ -1154,7 +1154,7 @@ static int hot_add_drconf_scn_to_nid(struct device_node *memory,
  * represented in the device tree as a node (i.e. memory@XXXX) for
  * each memblock.
  */
-int hot_add_node_scn_to_nid(unsigned long scn_addr)
+static int hot_add_node_scn_to_nid(unsigned long scn_addr)
 {
 	struct device_node *memory;
 	int nid = -1;
@@ -1235,7 +1235,7 @@ static u64 hot_add_drconf_memory_max(void)
         struct device_node *memory = NULL;
         unsigned int drconf_cell_cnt = 0;
         u64 lmb_size = 0;
-	const __be32 *dm = 0;
+	const __be32 *dm = NULL;
 
         memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
         if (memory) {
@@ -1535,7 +1535,7 @@ static void topology_work_fn(struct work_struct *work)
 }
 static DECLARE_WORK(topology_work, topology_work_fn);
 
-void topology_schedule_update(void)
+static void topology_schedule_update(void)
 {
 	schedule_work(&topology_work);
 }
-- 
cgit v1.2.3


From b88c4767d9e2290aaa22b8b3702ad72af0ebd113 Mon Sep 17 00:00:00 2001
From: Robert Jennings
Date: Mon, 28 Oct 2013 09:20:51 -0500
Subject: powerpc: Move local setup.h declarations to arch includes

Move the few declarations from arch/powerpc/kernel/setup.h
into arch/powerpc/include/asm/setup.h.  This resolves a
sparse warning for arch/powerpc/mm/numa.c which defines
do_init_bootmem() but can't include the setup.h header
in the prior path.

Resolves:
arch/powerpc/mm/numa.c:998:13:
        warning: symbol 'do_init_bootmem' was not declared.
                 Should it be static?

Signed-off-by: Robert C Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/setup.h   | 4 ++++
 arch/powerpc/kernel/module.c       | 3 +--
 arch/powerpc/kernel/module_32.c    | 3 +--
 arch/powerpc/kernel/module_64.c    | 3 +--
 arch/powerpc/kernel/setup-common.c | 2 --
 arch/powerpc/kernel/setup.h        | 9 ---------
 arch/powerpc/kernel/setup_32.c     | 2 --
 arch/powerpc/kernel/setup_64.c     | 2 --
 arch/powerpc/kernel/vdso.c         | 3 +--
 9 files changed, 8 insertions(+), 23 deletions(-)
 delete mode 100644 arch/powerpc/kernel/setup.h

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h
index d3ca85529b8b..703a8412dac2 100644
--- a/arch/powerpc/include/asm/setup.h
+++ b/arch/powerpc/include/asm/setup.h
@@ -23,6 +23,10 @@ extern void reloc_got2(unsigned long);
 
 #define PTRRELOC(x)	((typeof(x)) add_reloc_offset((unsigned long)(x)))
 
+void check_for_initrd(void);
+void do_init_bootmem(void);
+void setup_panic(void);
+
 #endif /* !__ASSEMBLY__ */
 
 #endif	/* _ASM_POWERPC_SETUP_H */
diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c
index 2d275707f419..9547381b631a 100644
--- a/arch/powerpc/kernel/module.c
+++ b/arch/powerpc/kernel/module.c
@@ -25,8 +25,7 @@
 #include <asm/uaccess.h>
 #include <asm/firmware.h>
 #include <linux/sort.h>
-
-#include "setup.h"
+#include <asm/setup.h>
 
 LIST_HEAD(module_bug_list);
 
diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c
index 2e3200ca485f..6cff040bf456 100644
--- a/arch/powerpc/kernel/module_32.c
+++ b/arch/powerpc/kernel/module_32.c
@@ -26,8 +26,7 @@
 #include <linux/cache.h>
 #include <linux/bug.h>
 #include <linux/sort.h>
-
-#include "setup.h"
+#include <asm/setup.h>
 
 #if 0
 #define DEBUGP printk
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index a102f4412392..12664c130d73 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -26,8 +26,7 @@
 #include <asm/firmware.h>
 #include <asm/code-patching.h>
 #include <linux/sort.h>
-
-#include "setup.h"
+#include <asm/setup.h>
 
 /* FIXME: We don't do .init separately.  To do this, we'd need to have
    a separate r2 value in the init and core section, and stub between
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 3d261c071fc8..febc80445d25 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -62,8 +62,6 @@
 #include <mm/mmu_decl.h>
 #include <asm/fadump.h>
 
-#include "setup.h"
-
 #ifdef DEBUG
 #include <asm/udbg.h>
 #define DBG(fmt...) udbg_printf(fmt)
diff --git a/arch/powerpc/kernel/setup.h b/arch/powerpc/kernel/setup.h
deleted file mode 100644
index 4c67ad7fae08..000000000000
--- a/arch/powerpc/kernel/setup.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _POWERPC_KERNEL_SETUP_H
-#define _POWERPC_KERNEL_SETUP_H
-
-void check_for_initrd(void);
-void do_init_bootmem(void);
-void setup_panic(void);
-extern int do_early_xmon;
-
-#endif /* _POWERPC_KERNEL_SETUP_H */
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index a4bbcae72578..b903dc5cf944 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -40,8 +40,6 @@
 #include <asm/mmu_context.h>
 #include <asm/epapr_hcalls.h>
 
-#include "setup.h"
-
 #define DBG(fmt...)
 
 extern void bootx_init(unsigned long r4, unsigned long phys);
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 278ca93e1f28..4085aaa9478f 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -68,8 +68,6 @@
 #include <asm/hugetlb.h>
 #include <asm/epapr_hcalls.h>
 
-#include "setup.h"
-
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
 #else
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index 1d9c92621b36..094e45c16a17 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -34,8 +34,7 @@
 #include <asm/firmware.h>
 #include <asm/vdso.h>
 #include <asm/vdso_datapage.h>
-
-#include "setup.h"
+#include <asm/setup.h>
 
 #undef DEBUG
 
-- 
cgit v1.2.3


From b83941798c35f9cffba36927011df2b53c3884d8 Mon Sep 17 00:00:00 2001
From: Vaishnavi Bhat
Date: Sun, 27 Oct 2013 11:47:19 +0530
Subject: powerpc: Fix a typo in comments of va to pa conversion

This patch fixes typo in comments virtual to physical
address conversion.

Signed-off-by: Vaishnavi Bhat <vaishnavi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/page.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index b9f426212d3a..753c66206a15 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -78,7 +78,7 @@ extern unsigned int HPAGE_SHIFT;
  *
  * Also, KERNELBASE >= PAGE_OFFSET and PHYSICAL_START >= MEMORY_START
  *
- * There are two was to determine a physical address from a virtual one:
+ * There are two ways to determine a physical address from a virtual one:
  * va = pa + PAGE_OFFSET - MEMORY_START
  * va = pa + KERNELBASE - PHYSICAL_START
  *
-- 
cgit v1.2.3


From 90890b1ef568a54547ef0490a7c15d7357b98bc9 Mon Sep 17 00:00:00 2001
From: Michael Ellerman
Date: Mon, 28 Oct 2013 15:00:35 +1100
Subject: powerpc: FA_DUMP depends on KEXEC

If you try and build the FA_DUMP code with CONFIG_KEXEC=n, you see
errors such as the following:

arch/powerpc/kernel/fadump.c
  408:2: error: 'crashing_cpu' undeclared (first use in this function)
  410:2: error: implicit declaration of function 'crash_save_vmcoreinfo'
  513:22: error: storage size of 'prstatus' isn't known
  520:2: error: implicit declaration of function 'elf_core_copy_kernel_regs'
  521:36: error: 'KEXEC_CORE_NOTE_NAME' undeclared (first use in this function)
  624:49: error: 'note_buf_t' undeclared (first use in this function)
  872:2: error: implicit declaration of function 'paddr_vmcoreinfo_note'
  874:18: error: 'vmcoreinfo_max_size' undeclared (first use in this function)

This is because although FA_DUMP doesn't use kexec as the actual reboot
mechanism, it does use parts of the kexec code to assemble/disassemble
the crash image.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 5f15468300bf..de5c61d5db2c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -407,7 +407,7 @@ config CRASH_DUMP
 
 config FA_DUMP
 	bool "Firmware-assisted dump"
-	depends on PPC64 && PPC_RTAS && CRASH_DUMP
+	depends on PPC64 && PPC_RTAS && CRASH_DUMP && KEXEC
 	help
 	  A robust mechanism to get reliable kernel crash dump with
 	  assistance from firmware. This approach does not use kexec,
-- 
cgit v1.2.3


From ecb35c3943040f4db735c7d14c24ee7750cbb482 Mon Sep 17 00:00:00 2001
From: Alistair Popple
Date: Thu, 17 Oct 2013 17:08:28 +1100
Subject: powerpc: Fix 64K page size support for PPC44x

PPC44x supports page sizes other than 4K however when 64K page sizes
are selected compilation fails. This is due to a change in the
definition of pgtable_t introduced by the following patch:

commit 5c1f6ee9a31cbdac90bbb8ae1ba4475031ac74b4
Author: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
powerpc: Reduce PTE table memory wastage

The above patch only implements the new layout for PPC64 so it doesn't
compile for PPC32 with a 64K page size. Ideally we should implement
the same layout for PPC32 however for the meantime this patch reverts
the definition of pgtable_t for PPC32.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/page.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 753c66206a15..32e4e212b9c1 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -403,7 +403,7 @@ void arch_free_page(struct page *page, int order);
 
 struct vm_area_struct;
 
-#ifdef CONFIG_PPC_64K_PAGES
+#if defined(CONFIG_PPC_64K_PAGES) && defined(CONFIG_PPC64)
 typedef pte_t *pgtable_t;
 #else
 typedef struct page *pgtable_t;
-- 
cgit v1.2.3


From 411cabf79e684171669ad29a0628c400b4431e95 Mon Sep 17 00:00:00 2001
From: Prarit Bhargava
Date: Thu, 17 Oct 2013 08:00:11 -0400
Subject: powerpc/vio: use strcpy in modalias_show

Commit e82b89a6f19bae73fb064d1b3dd91fcefbb478f4 used strcat instead of
strcpy which can result in an overflow of newlines on the buffer.

Signed-off-by: Prarit Bhargava
Cc: benh@kernel.crashing.org
Cc: ben@decadent.org.uk
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/vio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index d38cc08b16c7..cb92d8204ec7 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -1531,12 +1531,12 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
 
 	dn = dev->of_node;
 	if (!dn) {
-		strcat(buf, "\n");
+		strcpy(buf, "\n");
 		return strlen(buf);
 	}
 	cp = of_get_property(dn, "compatible", NULL);
 	if (!cp) {
-		strcat(buf, "\n");
+		strcpy(buf, "\n");
 		return strlen(buf);
 	}
 
-- 
cgit v1.2.3


From 3e7cec6b17d1c915cf4de1a3853f1b4ae0ed26b0 Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Thu, 17 Oct 2013 23:19:43 +1100
Subject: powerpc: Fix little endian issue in OF PCI scan

This issue was causing the QEMU emulated USB device to fail dring
PCI probe.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/pci_of_scan.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 4368ec6fdc8c..ac0b034f9ae0 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -302,7 +302,7 @@ static struct pci_dev *of_scan_pci_dev(struct pci_bus *bus,
 			    struct device_node *dn)
 {
 	struct pci_dev *dev = NULL;
-	const u32 *reg;
+	const __be32 *reg;
 	int reglen, devfn;
 
 	pr_debug("  * %s\n", dn->full_name);
@@ -312,7 +312,7 @@ static struct pci_dev *of_scan_pci_dev(struct pci_bus *bus,
 	reg = of_get_property(dn, "reg", &reglen);
 	if (reg == NULL || reglen < 20)
 		return NULL;
-	devfn = (reg[0] >> 8) & 0xff;
+	devfn = (of_read_number(reg, 1) >> 8) & 0xff;
 
 	/* Check if the PCI device is already there */
 	dev = pci_get_slot(bus, devfn);
-- 
cgit v1.2.3


From df015604cf5bb09f79c353926dd7e40d00d251a3 Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Thu, 17 Oct 2013 23:21:15 +1100
Subject: powerpc/pseries: Fix endian issues in pseries iommu code

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/pseries/iommu.c | 59 +++++++++++++++++-----------------
 1 file changed, 30 insertions(+), 29 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 0307901e4132..f253361552ae 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -52,7 +52,7 @@
 
 
 static void tce_invalidate_pSeries_sw(struct iommu_table *tbl,
-				      u64 *startp, u64 *endp)
+				      __be64 *startp, __be64 *endp)
 {
 	u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
 	unsigned long start, end, inc;
@@ -86,7 +86,7 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,
 			      struct dma_attrs *attrs)
 {
 	u64 proto_tce;
-	u64 *tcep, *tces;
+	__be64 *tcep, *tces;
 	u64 rpn;
 
 	proto_tce = TCE_PCI_READ; // Read allowed
@@ -94,12 +94,12 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,
 	if (direction != DMA_TO_DEVICE)
 		proto_tce |= TCE_PCI_WRITE;
 
-	tces = tcep = ((u64 *)tbl->it_base) + index;
+	tces = tcep = ((__be64 *)tbl->it_base) + index;
 
 	while (npages--) {
 		/* can't move this out since we might cross MEMBLOCK boundary */
 		rpn = __pa(uaddr) >> TCE_SHIFT;
-		*tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
+		*tcep = cpu_to_be64(proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT);
 
 		uaddr += TCE_PAGE_SIZE;
 		tcep++;
@@ -113,9 +113,9 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,
 
 static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages)
 {
-	u64 *tcep, *tces;
+	__be64 *tcep, *tces;
 
-	tces = tcep = ((u64 *)tbl->it_base) + index;
+	tces = tcep = ((__be64 *)tbl->it_base) + index;
 
 	while (npages--)
 		*(tcep++) = 0;
@@ -126,11 +126,11 @@ static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages)
 
 static unsigned long tce_get_pseries(struct iommu_table *tbl, long index)
 {
-	u64 *tcep;
+	__be64 *tcep;
 
-	tcep = ((u64 *)tbl->it_base) + index;
+	tcep = ((__be64 *)tbl->it_base) + index;
 
-	return *tcep;
+	return be64_to_cpu(*tcep);
 }
 
 static void tce_free_pSeriesLP(struct iommu_table*, long, long);
@@ -177,7 +177,7 @@ static int tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 	return ret;
 }
 
-static DEFINE_PER_CPU(u64 *, tce_page);
+static DEFINE_PER_CPU(__be64 *, tce_page);
 
 static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 				     long npages, unsigned long uaddr,
@@ -186,7 +186,7 @@ static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 {
 	u64 rc = 0;
 	u64 proto_tce;
-	u64 *tcep;
+	__be64 *tcep;
 	u64 rpn;
 	long l, limit;
 	long tcenum_start = tcenum, npages_start = npages;
@@ -206,7 +206,7 @@ static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 	 * from iommu_alloc{,_sg}()
 	 */
 	if (!tcep) {
-		tcep = (u64 *)__get_free_page(GFP_ATOMIC);
+		tcep = (__be64 *)__get_free_page(GFP_ATOMIC);
 		/* If allocation fails, fall back to the loop implementation */
 		if (!tcep) {
 			local_irq_restore(flags);
@@ -230,7 +230,7 @@ static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		limit = min_t(long, npages, 4096/TCE_ENTRY_SIZE);
 
 		for (l = 0; l < limit; l++) {
-			tcep[l] = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
+			tcep[l] = cpu_to_be64(proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT);
 			rpn++;
 		}
 
@@ -329,16 +329,16 @@ struct direct_window {
 
 /* Dynamic DMA Window support */
 struct ddw_query_response {
-	u32 windows_available;
-	u32 largest_available_block;
-	u32 page_size;
-	u32 migration_capable;
+	__be32 windows_available;
+	__be32 largest_available_block;
+	__be32 page_size;
+	__be32 migration_capable;
 };
 
 struct ddw_create_response {
-	u32 liobn;
-	u32 addr_hi;
-	u32 addr_lo;
+	__be32 liobn;
+	__be32 addr_hi;
+	__be32 addr_lo;
 };
 
 static LIST_HEAD(direct_window_list);
@@ -392,7 +392,8 @@ static int tce_setrange_multi_pSeriesLP(unsigned long start_pfn,
 					unsigned long num_pfn, const void *arg)
 {
 	const struct dynamic_dma_window_prop *maprange = arg;
-	u64 *tcep, tce_size, num_tce, dma_offset, next, proto_tce, liobn;
+	u64 tce_size, num_tce, dma_offset, next, proto_tce, liobn;
+	__be64 *tcep;
 	u32 tce_shift;
 	u64 rc = 0;
 	long l, limit;
@@ -401,7 +402,7 @@ static int tce_setrange_multi_pSeriesLP(unsigned long start_pfn,
 	tcep = __get_cpu_var(tce_page);
 
 	if (!tcep) {
-		tcep = (u64 *)__get_free_page(GFP_ATOMIC);
+		tcep = (__be64 *)__get_free_page(GFP_ATOMIC);
 		if (!tcep) {
 			local_irq_enable();
 			return -ENOMEM;
@@ -435,7 +436,7 @@ static int tce_setrange_multi_pSeriesLP(unsigned long start_pfn,
 		dma_offset = next + be64_to_cpu(maprange->dma_base);
 
 		for (l = 0; l < limit; l++) {
-			tcep[l] = proto_tce | next;
+			tcep[l] = cpu_to_be64(proto_tce | next);
 			next += tce_size;
 		}
 
@@ -780,7 +781,7 @@ static u64 find_existing_ddw(struct device_node *pdn)
 	list_for_each_entry(window, &direct_window_list, list) {
 		if (window->device == pdn) {
 			direct64 = window->prop;
-			dma_addr = direct64->dma_base;
+			dma_addr = be64_to_cpu(direct64->dma_base);
 			break;
 		}
 	}
@@ -1045,11 +1046,11 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
 		dev_dbg(&dev->dev, "no free dynamic windows");
 		goto out_restore_window;
 	}
-	if (query.page_size & 4) {
+	if (be32_to_cpu(query.page_size) & 4) {
 		page_shift = 24; /* 16MB */
-	} else if (query.page_size & 2) {
+	} else if (be32_to_cpu(query.page_size) & 2) {
 		page_shift = 16; /* 64kB */
-	} else if (query.page_size & 1) {
+	} else if (be32_to_cpu(query.page_size) & 1) {
 		page_shift = 12; /* 4kB */
 	} else {
 		dev_dbg(&dev->dev, "no supported direct page size in mask %x",
@@ -1059,7 +1060,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
 	/* verify the window * number of ptes will map the partition */
 	/* check largest block * page size > max memory hotplug addr */
 	max_addr = memory_hotplug_max();
-	if (query.largest_available_block < (max_addr >> page_shift)) {
+	if (be32_to_cpu(query.largest_available_block) < (max_addr >> page_shift)) {
 		dev_dbg(&dev->dev, "can't map partiton max 0x%llx with %u "
 			  "%llu-sized pages\n", max_addr,  query.largest_available_block,
 			  1ULL << page_shift);
@@ -1085,7 +1086,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
 	if (ret != 0)
 		goto out_free_prop;
 
-	ddwprop->liobn = cpu_to_be32(create.liobn);
+	ddwprop->liobn = create.liobn;
 	ddwprop->dma_base = cpu_to_be64(of_read_number(&create.addr_hi, 2));
 	ddwprop->tce_shift = cpu_to_be32(page_shift);
 	ddwprop->window_shift = cpu_to_be32(len);
-- 
cgit v1.2.3


From 075f6311af30b011eaa8e50341c06a9082a796a9 Mon Sep 17 00:00:00 2001
From: Tom Musta
Date: Fri, 18 Oct 2013 12:07:10 -0500
Subject: powerpc: Fix Handler of Unaligned Load/Store Strings

The alignment handler is incorrect for unaligned string instructions
in little endian mode.  These instructions access data as arrays of
bytes and thus are endian neutral.  However, the routine also handles
the load/store multiple instructions, which are NOT endian neutral.

This patch toggles the byte swapping flag for the string instructions
in little endian builds.  This effectively disables the byte swapping
logic.

Signed-off-by: Tom Musta <tmusta@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/align.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index 6e3f9772aaba..a3169a987b84 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -254,15 +254,20 @@ static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr)
  * bottom 4 bytes of each register, and the loads clear the
  * top 4 bytes of the affected register.
  */
+#ifdef __BIG_ENDIAN__
 #ifdef CONFIG_PPC64
 #define REG_BYTE(rp, i)		*((u8 *)((rp) + ((i) >> 2)) + ((i) & 3) + 4)
 #else
 #define REG_BYTE(rp, i)		*((u8 *)(rp) + (i))
 #endif
+#endif
+
+#ifdef __LITTLE_ENDIAN__
+#define REG_BYTE(rp, i)		(*(((u8 *)((rp) + ((i)>>2)) + ((i)&3))))
+#endif
 
 #define SWIZ_PTR(p)		((unsigned char __user *)((p) ^ swiz))
 
-#ifdef __BIG_ENDIAN__
 static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
 			    unsigned int reg, unsigned int nb,
 			    unsigned int flags, unsigned int instr,
@@ -304,6 +309,15 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
 			nb0 = nb + reg * 4 - 128;
 			nb = 128 - reg * 4;
 		}
+#ifdef __LITTLE_ENDIAN__
+		/*
+		 *  String instructions are endian neutral but the code
+		 *  below is not.  Force byte swapping on so that the
+		 *  effects of swizzling are undone in the load/store
+		 *  loops below.
+		 */
+		flags ^= SW;
+#endif
 	} else {
 		/* lwm, stmw */
 		nb = (32 - reg) * 4;
@@ -364,6 +378,7 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
  * Only POWER6 has these instructions, and it does true little-endian,
  * so we don't need the address swizzling.
  */
+#ifdef __BIG_ENDIAN__
 static int emulate_fp_pair(unsigned char __user *addr, unsigned int reg,
 			   unsigned int flags)
 {
@@ -882,13 +897,9 @@ int fix_alignment(struct pt_regs *regs)
 	 * function
 	 */
 	if (flags & M) {
-#ifdef __BIG_ENDIAN__
 		PPC_WARN_ALIGNMENT(multiple, regs);
 		return emulate_multiple(regs, addr, reg, nb,
 					flags, instr, swiz);
-#else
-		return -EFAULT;
-#endif
 	}
 
 	/* Verify the address of the operand */
-- 
cgit v1.2.3


From 630c8a5fc9fb2f3541652b65f23630757d304cc9 Mon Sep 17 00:00:00 2001
From: Tom Musta
Date: Fri, 18 Oct 2013 12:08:22 -0500
Subject: powerpc: Enable Little Endian Alignment Handler for Float Pair
 Instructions

This patch enables alignment handling for the load/store floating point
pair instructions (lfdp, lfdpx, stfdp, stfdpx).  The handler routine
is properly coded and only needs to be enabled.

Signed-off-by: Tom Musta <tmusta@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/align.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index a3169a987b84..de91f3ae631e 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -378,7 +378,6 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
  * Only POWER6 has these instructions, and it does true little-endian,
  * so we don't need the address swizzling.
  */
-#ifdef __BIG_ENDIAN__
 static int emulate_fp_pair(unsigned char __user *addr, unsigned int reg,
 			   unsigned int flags)
 {
@@ -406,7 +405,6 @@ static int emulate_fp_pair(unsigned char __user *addr, unsigned int reg,
 		return -EFAULT;
 	return 1;	/* exception handled and fixed up */
 }
-#endif
 
 #ifdef CONFIG_SPE
 
@@ -918,12 +916,8 @@ int fix_alignment(struct pt_regs *regs)
 
 	/* Special case for 16-byte FP loads and stores */
 	if (nb == 16) {
-#ifdef __BIG_ENDIAN__
 		PPC_WARN_ALIGNMENT(fp_pair, regs);
 		return emulate_fp_pair(addr, reg, flags);
-#else
-		return -EFAULT;
-#endif
 	}
 
 	PPC_WARN_ALIGNMENT(unaligned, regs);
-- 
cgit v1.2.3


From 6506b4718bb59c5d4e59235b81b5e13ea5d3c49a Mon Sep 17 00:00:00 2001
From: Tom Musta
Date: Fri, 18 Oct 2013 14:42:08 -0500
Subject: powerpc: Fix Unaligned Loads and Stores

This patch modifies the unaligned access routines of the sstep.c
module so that it properly reverses the bytes of storage operands
in the little endian kernel kernel.   This is implemented by
breaking an unaligned little endian access into a combination of
single byte accesses plus an overal byte reversal operation.

Signed-off-by: Tom Musta <tmusta@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/lib/sstep.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index b1faa1593c90..0121d2140ab9 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -212,11 +212,19 @@ static int __kprobes read_mem_unaligned(unsigned long *dest, unsigned long ea,
 {
 	int err;
 	unsigned long x, b, c;
+#ifdef __LITTLE_ENDIAN__
+	int len = nb; /* save a copy of the length for byte reversal */
+#endif
 
 	/* unaligned, do this in pieces */
 	x = 0;
 	for (; nb > 0; nb -= c) {
+#ifdef __LITTLE_ENDIAN__
+		c = 1;
+#endif
+#ifdef __BIG_ENDIAN__
 		c = max_align(ea);
+#endif
 		if (c > nb)
 			c = max_align(nb);
 		err = read_mem_aligned(&b, ea, c);
@@ -225,7 +233,24 @@ static int __kprobes read_mem_unaligned(unsigned long *dest, unsigned long ea,
 		x = (x << (8 * c)) + b;
 		ea += c;
 	}
+#ifdef __LITTLE_ENDIAN__
+	switch (len) {
+	case 2:
+		*dest = byterev_2(x);
+		break;
+	case 4:
+		*dest = byterev_4(x);
+		break;
+#ifdef __powerpc64__
+	case 8:
+		*dest = byterev_8(x);
+		break;
+#endif
+	}
+#endif
+#ifdef __BIG_ENDIAN__
 	*dest = x;
+#endif
 	return 0;
 }
 
@@ -273,9 +298,29 @@ static int __kprobes write_mem_unaligned(unsigned long val, unsigned long ea,
 	int err;
 	unsigned long c;
 
+#ifdef __LITTLE_ENDIAN__
+	switch (nb) {
+	case 2:
+		val = byterev_2(val);
+		break;
+	case 4:
+		val = byterev_4(val);
+		break;
+#ifdef __powerpc64__
+	case 8:
+		val = byterev_8(val);
+		break;
+#endif
+	}
+#endif
 	/* unaligned or little-endian, do this in pieces */
 	for (; nb > 0; nb -= c) {
+#ifdef __LITTLE_ENDIAN__
+		c = 1;
+#endif
+#ifdef __BIG_ENDIAN__
 		c = max_align(ea);
+#endif
 		if (c > nb)
 			c = max_align(nb);
 		err = write_mem_aligned(val >> (nb - c) * 8, ea, c);
-- 
cgit v1.2.3


From dbc2fbd7c29a78724e761711d516930246c0e1c2 Mon Sep 17 00:00:00 2001
From: Tom Musta
Date: Fri, 18 Oct 2013 14:44:17 -0500
Subject: powerpc: Fix Unaligned LE Floating Point Loads and Stores

This patch addresses unaligned single precision floating point loads
and stores in the single-step code.  The old implementation
improperly treated an 8 byte structure as an array of two 4 byte
words, which is a classic little endian bug.

Signed-off-by: Tom Musta <tmusta@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/lib/sstep.c | 52 +++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 40 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index 0121d2140ab9..c0511c27a733 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -355,22 +355,36 @@ static int __kprobes do_fp_load(int rn, int (*func)(int, unsigned long),
 				struct pt_regs *regs)
 {
 	int err;
-	unsigned long val[sizeof(double) / sizeof(long)];
+	union {
+		double dbl;
+		unsigned long ul[2];
+		struct {
+#ifdef __BIG_ENDIAN__
+			unsigned _pad_;
+			unsigned word;
+#endif
+#ifdef __LITTLE_ENDIAN__
+			unsigned word;
+			unsigned _pad_;
+#endif
+		} single;
+	} data;
 	unsigned long ptr;
 
 	if (!address_ok(regs, ea, nb))
 		return -EFAULT;
 	if ((ea & 3) == 0)
 		return (*func)(rn, ea);
-	ptr = (unsigned long) &val[0];
+	ptr = (unsigned long) &data.ul;
 	if (sizeof(unsigned long) == 8 || nb == 4) {
-		err = read_mem_unaligned(&val[0], ea, nb, regs);
-		ptr += sizeof(unsigned long) - nb;
+		err = read_mem_unaligned(&data.ul[0], ea, nb, regs);
+		if (nb == 4)
+			ptr = (unsigned long)&(data.single.word);
 	} else {
 		/* reading a double on 32-bit */
-		err = read_mem_unaligned(&val[0], ea, 4, regs);
+		err = read_mem_unaligned(&data.ul[0], ea, 4, regs);
 		if (!err)
-			err = read_mem_unaligned(&val[1], ea + 4, 4, regs);
+			err = read_mem_unaligned(&data.ul[1], ea + 4, 4, regs);
 	}
 	if (err)
 		return err;
@@ -382,28 +396,42 @@ static int __kprobes do_fp_store(int rn, int (*func)(int, unsigned long),
 				 struct pt_regs *regs)
 {
 	int err;
-	unsigned long val[sizeof(double) / sizeof(long)];
+	union {
+		double dbl;
+		unsigned long ul[2];
+		struct {
+#ifdef __BIG_ENDIAN__
+			unsigned _pad_;
+			unsigned word;
+#endif
+#ifdef __LITTLE_ENDIAN__
+			unsigned word;
+			unsigned _pad_;
+#endif
+		} single;
+	} data;
 	unsigned long ptr;
 
 	if (!address_ok(regs, ea, nb))
 		return -EFAULT;
 	if ((ea & 3) == 0)
 		return (*func)(rn, ea);
-	ptr = (unsigned long) &val[0];
+	ptr = (unsigned long) &data.ul[0];
 	if (sizeof(unsigned long) == 8 || nb == 4) {
-		ptr += sizeof(unsigned long) - nb;
+		if (nb == 4)
+			ptr = (unsigned long)&(data.single.word);
 		err = (*func)(rn, ptr);
 		if (err)
 			return err;
-		err = write_mem_unaligned(val[0], ea, nb, regs);
+		err = write_mem_unaligned(data.ul[0], ea, nb, regs);
 	} else {
 		/* writing a double on 32-bit */
 		err = (*func)(rn, ptr);
 		if (err)
 			return err;
-		err = write_mem_unaligned(val[0], ea, 4, regs);
+		err = write_mem_unaligned(data.ul[0], ea, 4, regs);
 		if (!err)
-			err = write_mem_unaligned(val[1], ea + 4, 4, regs);
+			err = write_mem_unaligned(data.ul[1], ea + 4, 4, regs);
 	}
 	return err;
 }
-- 
cgit v1.2.3


From 733187e29576041ceccf3b82092ca900fc929170 Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Sun, 20 Oct 2013 10:26:20 +1100
Subject: powerpc/pseries: Fix dedicated processor partition detection

commit f13c13a00512 (powerpc: Stop using non-architected shared_proc
field in lppaca) fixed a potential issue with shared/dedicated
partition detection. The old method of detection relied on an
unarchitected field (shared_proc), and this patch switched
to using something architected (a non zero yield_count).

Unfortunately the assertion in the Linux header that yield_count
is only non zero on shared processor partitions is not true. It
turns out dedicated processor partitions can increment yield_count
and as such we falsely detect dedicated partitions as shared.

Fix the comment, and switch back to using the old method.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/lppaca.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h
index 4470d1e34d23..844c28de7ec0 100644
--- a/arch/powerpc/include/asm/lppaca.h
+++ b/arch/powerpc/include/asm/lppaca.h
@@ -84,8 +84,8 @@ struct lppaca {
 	 * the processor is yielded (either because of an OS yield or a
 	 * hypervisor preempt).  An even value implies that the processor is
 	 * currently executing.
-	 * NOTE: This value will ALWAYS be zero for dedicated processors and
-	 * will NEVER be zero for shared processors (ie, initialized to a 1).
+	 * NOTE: Even dedicated processor partitions can yield so this
+	 * field cannot be used to determine if we are shared or dedicated.
 	 */
 	volatile __be32 yield_count;
 	volatile __be32 dispersion_count; /* dispatch changed physical cpu */
@@ -106,15 +106,15 @@ extern struct lppaca lppaca[];
 #define lppaca_of(cpu)	(*paca[cpu].lppaca_ptr)
 
 /*
- * Old kernels used a reserved bit in the VPA to determine if it was running
- * in shared processor mode. New kernels look for a non zero yield count
- * but KVM still needs to set the bit to keep the old stuff happy.
+ * We are using a non architected field to determine if a partition is
+ * shared or dedicated. This currently works on both KVM and PHYP, but
+ * we will have to transition to something better.
  */
 #define LPPACA_OLD_SHARED_PROC		2
 
 static inline bool lppaca_shared_proc(struct lppaca *l)
 {
-	return l->yield_count != 0;
+	return !!(l->__old_status & LPPACA_OLD_SHARED_PROC);
 }
 
 /*
-- 
cgit v1.2.3


From 686245bee9528a2f62fa88b1f776eacd94d858ee Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Tue, 22 Oct 2013 11:05:25 +1100
Subject: powerpc: Use -mcpu=power7 on ppc64 little endian builds

Using -mcpu=power7 allows gcc to use a number of new instructions
including 64 bit byte reversed loads.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/Kconfig.cputype | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 6704e2e20e6b..c2a566fb8bb8 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -93,22 +93,23 @@ choice
 
 config GENERIC_CPU
 	bool "Generic"
+	depends on !CPU_LITTLE_ENDIAN
 
 config CELL_CPU
 	bool "Cell Broadband Engine"
-	depends on PPC_BOOK3S_64
+	depends on PPC_BOOK3S_64 && !CPU_LITTLE_ENDIAN
 
 config POWER4_CPU
 	bool "POWER4"
-	depends on PPC_BOOK3S_64
+	depends on PPC_BOOK3S_64 && !CPU_LITTLE_ENDIAN
 
 config POWER5_CPU
 	bool "POWER5"
-	depends on PPC_BOOK3S_64
+	depends on PPC_BOOK3S_64 && !CPU_LITTLE_ENDIAN
 
 config POWER6_CPU
 	bool "POWER6"
-	depends on PPC_BOOK3S_64
+	depends on PPC_BOOK3S_64 && !CPU_LITTLE_ENDIAN
 
 config POWER7_CPU
 	bool "POWER7"
-- 
cgit v1.2.3


From 4d16bd39c094751adb556382b95373ac53edba3c Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Tue, 22 Oct 2013 11:44:50 +1100
Subject: powerpc: sync ppc64, ppc64e and pseries configs

Run savedefconfig over the ppc64, ppc64e and pseries config

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/configs/ppc64_defconfig   | 15 +++------------
 arch/powerpc/configs/ppc64e_defconfig  | 10 ++--------
 arch/powerpc/configs/pseries_defconfig | 13 +++----------
 3 files changed, 8 insertions(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 0e8cfd09da2f..56ac8bbeb032 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -2,7 +2,6 @@ CONFIG_PPC64=y
 CONFIG_ALTIVEC=y
 CONFIG_VSX=y
 CONFIG_SMP=y
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_IRQ_DOMAIN_DEBUG=y
@@ -25,7 +24,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_EFI_PARTITION=y
 CONFIG_PPC_SPLPAR=y
 CONFIG_SCANLOG=m
 CONFIG_PPC_SMLPAR=y
@@ -50,12 +48,10 @@ CONFIG_CPU_FREQ_PMAC64=y
 CONFIG_HZ_100=y
 CONFIG_BINFMT_MISC=m
 CONFIG_PPC_TRANSACTIONAL_MEM=y
-CONFIG_HOTPLUG_CPU=y
 CONFIG_KEXEC=y
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_SCHED_SMT=y
-CONFIG_PPC_DENORMALISATION=y
 CONFIG_PCCARD=y
 CONFIG_ELECTRA_CF=y
 CONFIG_HOTPLUG_PCI=y
@@ -89,7 +85,6 @@ CONFIG_NF_CONNTRACK_PPTP=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
@@ -131,7 +126,6 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
@@ -216,6 +210,7 @@ CONFIG_DUMMY=m
 CONFIG_NETCONSOLE=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_TUN=m
+CONFIG_VHOST_NET=m
 CONFIG_VORTEX=y
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
@@ -301,7 +296,6 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_PANTHERLORD=y
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
@@ -386,21 +380,19 @@ CONFIG_NLS_UTF8=y
 CONFIG_CRC_T10DIF=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_STACK_USAGE=y
+CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_LOCKUP_DETECTOR=y
 CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_LATENCYTOP=y
 CONFIG_SCHED_TRACER=y
 CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_CODE_PATCHING_SELFTEST=y
 CONFIG_FTR_FIXUP_SELFTEST=y
 CONFIG_MSI_BITMAP_SELFTEST=y
 CONFIG_XMON=y
 CONFIG_BOOTX_TEXT=y
 CONFIG_PPC_EARLY_DEBUG=y
-CONFIG_PPC_EARLY_DEBUG_BOOTX=y
-CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
@@ -422,4 +414,3 @@ CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM_BOOK3S_64=m
 CONFIG_KVM_BOOK3S_64_HV=y
-CONFIG_VHOST_NET=m
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
index 0a6be6dd6003..f627fda08953 100644
--- a/arch/powerpc/configs/ppc64e_defconfig
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -1,7 +1,6 @@
 CONFIG_PPC64=y
 CONFIG_PPC_BOOK3E_64=y
 CONFIG_SMP=y
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_NO_HZ=y
@@ -61,7 +60,6 @@ CONFIG_NF_CONNTRACK_PPTP=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
@@ -103,7 +101,6 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
@@ -193,7 +190,6 @@ CONFIG_PPP_SYNC_TTY=m
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_MISC=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
@@ -230,7 +226,6 @@ CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_GREENASIA=y
 CONFIG_HID_SMARTJOYPLUS=y
@@ -302,19 +297,18 @@ CONFIG_NLS_UTF8=y
 CONFIG_CRC_T10DIF=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_STACK_USAGE=y
+CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_LATENCYTOP=y
 CONFIG_IRQSOFF_TRACER=y
 CONFIG_SCHED_TRACER=y
 CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_CODE_PATCHING_SELFTEST=y
 CONFIG_FTR_FIXUP_SELFTEST=y
 CONFIG_MSI_BITMAP_SELFTEST=y
 CONFIG_XMON=y
-CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 1d4b9763895d..2dec56dd3e93 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -3,7 +3,6 @@ CONFIG_ALTIVEC=y
 CONFIG_VSX=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2048
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_AUDIT=y
@@ -33,7 +32,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_EFI_PARTITION=y
 CONFIG_PPC_SPLPAR=y
 CONFIG_SCANLOG=m
 CONFIG_PPC_SMLPAR=y
@@ -44,7 +42,6 @@ CONFIG_IBMEBUS=y
 CONFIG_HZ_100=y
 CONFIG_BINFMT_MISC=m
 CONFIG_PPC_TRANSACTIONAL_MEM=y
-CONFIG_HOTPLUG_CPU=y
 CONFIG_KEXEC=y
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_MEMORY_HOTPLUG=y
@@ -52,7 +49,6 @@ CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_PPC_64K_PAGES=y
 CONFIG_PPC_SUBPAGE_PROT=y
 CONFIG_SCHED_SMT=y
-CONFIG_PPC_DENORMALISATION=y
 CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_RPA=m
 CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
@@ -113,7 +109,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
@@ -179,6 +174,7 @@ CONFIG_DUMMY=m
 CONFIG_NETCONSOLE=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_TUN=m
+CONFIG_VHOST_NET=m
 CONFIG_VORTEX=y
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
@@ -237,7 +233,6 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_PANTHERLORD=y
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
@@ -314,18 +309,17 @@ CONFIG_NLS_UTF8=y
 CONFIG_CRC_T10DIF=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOCKUP_DETECTOR=y
 CONFIG_DEBUG_STACK_USAGE=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_LOCKUP_DETECTOR=y
 CONFIG_LATENCYTOP=y
 CONFIG_SCHED_TRACER=y
 CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_CODE_PATCHING_SELFTEST=y
 CONFIG_FTR_FIXUP_SELFTEST=y
 CONFIG_MSI_BITMAP_SELFTEST=y
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
-CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
@@ -347,4 +341,3 @@ CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM_BOOK3S_64=m
 CONFIG_KVM_BOOK3S_64_HV=y
-CONFIG_VHOST_NET=m
-- 
cgit v1.2.3


From b7697592ef7c52aaf42879ae718a4b0a8a8b17dc Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Tue, 22 Oct 2013 11:45:31 +1100
Subject: powerpc: Enable multipath modules on ppc64 and pseries

Enable a few modules required to boot on a POWER multipath
box.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/configs/ppc64_defconfig   | 6 ++++++
 arch/powerpc/configs/pseries_defconfig | 6 ++++++
 2 files changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 56ac8bbeb032..f2e1d1ba51f8 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -179,6 +179,9 @@ CONFIG_SCSI_IPR=y
 CONFIG_SCSI_QLA_FC=m
 CONFIG_SCSI_QLA_ISCSI=m
 CONFIG_SCSI_LPFC=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_ALUA=m
 CONFIG_ATA=y
 CONFIG_SATA_SIL24=y
 CONFIG_SATA_SVW=y
@@ -197,6 +200,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_UEVENT=y
 CONFIG_ADB_PMU=y
 CONFIG_PMAC_SMU=y
 CONFIG_THERM_PM72=y
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 2dec56dd3e93..eafec1a622a8 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -152,6 +152,9 @@ CONFIG_SCSI_IPR=y
 CONFIG_SCSI_QLA_FC=m
 CONFIG_SCSI_QLA_ISCSI=m
 CONFIG_SCSI_LPFC=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_ALUA=m
 CONFIG_ATA=y
 # CONFIG_ATA_SFF is not set
 CONFIG_MD=y
@@ -169,6 +172,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_UEVENT=y
 CONFIG_BONDING=m
 CONFIG_DUMMY=m
 CONFIG_NETCONSOLE=y
-- 
cgit v1.2.3


From 65508689d43afd0d8a3b659e83ed51b90c5083cf Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Tue, 22 Oct 2013 11:46:15 +1100
Subject: powerpc: Enable virtio on ppc64 and pseries configs

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/configs/ppc64_defconfig   | 6 ++++++
 arch/powerpc/configs/pseries_defconfig | 6 ++++++
 2 files changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index f2e1d1ba51f8..581a3bcae728 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -151,6 +151,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_VIRTIO_BLK=m
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_GENERIC=y
@@ -179,6 +180,7 @@ CONFIG_SCSI_IPR=y
 CONFIG_SCSI_QLA_FC=m
 CONFIG_SCSI_QLA_ISCSI=m
 CONFIG_SCSI_LPFC=m
+CONFIG_SCSI_VIRTIO=m
 CONFIG_SCSI_DH=m
 CONFIG_SCSI_DH_RDAC=m
 CONFIG_SCSI_DH_ALUA=m
@@ -216,6 +218,7 @@ CONFIG_DUMMY=m
 CONFIG_NETCONSOLE=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_TUN=m
+CONFIG_VIRTIO_NET=m
 CONFIG_VHOST_NET=m
 CONFIG_VORTEX=y
 CONFIG_ACENIC=m
@@ -263,6 +266,7 @@ CONFIG_HVC_CONSOLE=y
 CONFIG_HVC_RTAS=y
 CONFIG_HVC_BEAT=y
 CONFIG_HVCS=m
+CONFIG_VIRTIO_CONSOLE=m
 CONFIG_IBM_BSR=m
 CONFIG_RAW_DRIVER=y
 CONFIG_I2C_CHARDEV=y
@@ -328,6 +332,8 @@ CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_PASEMI=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index eafec1a622a8..e9a8b4e0a0f6 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -127,6 +127,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_VIRTIO_BLK=m
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_GENERIC=y
@@ -152,6 +153,7 @@ CONFIG_SCSI_IPR=y
 CONFIG_SCSI_QLA_FC=m
 CONFIG_SCSI_QLA_ISCSI=m
 CONFIG_SCSI_LPFC=m
+CONFIG_SCSI_VIRTIO=m
 CONFIG_SCSI_DH=m
 CONFIG_SCSI_DH_RDAC=m
 CONFIG_SCSI_DH_ALUA=m
@@ -180,6 +182,7 @@ CONFIG_DUMMY=m
 CONFIG_NETCONSOLE=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_TUN=m
+CONFIG_VIRTIO_NET=m
 CONFIG_VHOST_NET=m
 CONFIG_VORTEX=y
 CONFIG_ACENIC=m
@@ -218,6 +221,7 @@ CONFIG_SERIAL_JSM=m
 CONFIG_HVC_CONSOLE=y
 CONFIG_HVC_RTAS=y
 CONFIG_HVCS=m
+CONFIG_VIRTIO_CONSOLE=m
 CONFIG_IBM_BSR=m
 CONFIG_GEN_RTC=y
 CONFIG_RAW_DRIVER=y
@@ -259,6 +263,8 @@ CONFIG_INFINIBAND_IPOIB=m
 CONFIG_INFINIBAND_IPOIB_CM=y
 CONFIG_INFINIBAND_SRP=m
 CONFIG_INFINIBAND_ISER=m
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-- 
cgit v1.2.3


From bbe30b3b576b4ba96641a7c244071282618b2cbb Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Tue, 15 Oct 2013 14:36:31 +1100
Subject: powerpc: Use 32 bit loads and stores when operating on condition
 register values

The condition register (CR) is a 32 bit quantity so we should use
32 bit loads and stores.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/tm.S                       | 8 ++++----
 arch/powerpc/platforms/powernv/opal-wrappers.S | 4 ++--
 2 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S
index 761af4f0a632..ef47bcbd4352 100644
--- a/arch/powerpc/kernel/tm.S
+++ b/arch/powerpc/kernel/tm.S
@@ -106,7 +106,7 @@ DSCR_DEFAULT:
 _GLOBAL(tm_reclaim)
 	mfcr	r6
 	mflr	r0
-	std	r6, 8(r1)
+	stw	r6, 8(r1)
 	std	r0, 16(r1)
 	std	r2, 40(r1)
 	stdu	r1, -TM_FRAME_SIZE(r1)
@@ -285,7 +285,7 @@ dont_backup_fp:
 	REST_NVGPRS(r1)
 
 	addi    r1, r1, TM_FRAME_SIZE
-	ld	r4, 8(r1)
+	lwz	r4, 8(r1)
 	ld	r0, 16(r1)
 	mtcr	r4
 	mtlr	r0
@@ -310,7 +310,7 @@ dont_backup_fp:
 _GLOBAL(tm_recheckpoint)
 	mfcr	r5
 	mflr	r0
-	std	r5, 8(r1)
+	stw	r5, 8(r1)
 	std	r0, 16(r1)
 	std	r2, 40(r1)
 	stdu	r1, -TM_FRAME_SIZE(r1)
@@ -444,7 +444,7 @@ restore_gprs:
 	REST_NVGPRS(r1)
 
 	addi    r1, r1, TM_FRAME_SIZE
-	ld	r4, 8(r1)
+	lwz	r4, 8(r1)
 	ld	r0, 16(r1)
 	mtcr	r4
 	mtlr	r0
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 2a03e1e63c7a..403d05840625 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -24,7 +24,7 @@
 	mflr	r0;			\
 	mfcr	r12;			\
 	std	r0,16(r1);		\
-	std	r12,8(r1);		\
+	stw	r12,8(r1);		\
 	std	r1,PACAR1(r13);		\
 	li	r0,0;			\
 	mfmsr	r12;			\
@@ -53,7 +53,7 @@ _STATIC(opal_return)
 	 */
 	FIXUP_ENDIAN
 	ld	r2,PACATOC(r13);
-	ld	r4,8(r1);
+	lwz	r4,8(r1);
 	ld	r5,16(r1);
 	ld	r6,PACASAVEDMSR(r13);
 	mtspr	SPRN_SRR0,r5;
-- 
cgit v1.2.3


From 07fb41a7525539d7ad37c25f2a2689fd95a6ab68 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven
Date: Mon, 14 Oct 2013 09:40:16 +0200
Subject: powerpc/kexec: kexec_sequence() is in misc_64.S

Correct reference to the location of the kexec_sequence() assembly helper.
There never was a kexec_stub.S in mainline.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/machine_kexec_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 611acdf30096..be4e6d648f60 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -312,7 +312,7 @@ static union thread_union kexec_stack __init_task_data =
  */
 struct paca_struct kexec_paca;
 
-/* Our assembly helper, in kexec_stub.S */
+/* Our assembly helper, in misc_64.S */
 extern void kexec_sequence(void *newstack, unsigned long start,
 			   void *image, void *control,
 			   void (*clear_all)(void)) __noreturn;
-- 
cgit v1.2.3


From ef1313deafb7baa6d3382044e962d5ad5e8c8dd6 Mon Sep 17 00:00:00 2001
From: Anton Blanchard
Date: Mon, 14 Oct 2013 21:03:58 +1100
Subject: powerpc: Add VMX optimised xor for RAID5

Add a VMX optimised xor, used primarily for RAID5. On a POWER7 blade
this is a decent win:

   32regs    : 17932.800 MB/sec
   altivec   : 19724.800 MB/sec

The bigger gain is when the same test is run in SMT4 mode, as it
would if there was a lot of work going on:

   8regs     :  8377.600 MB/sec
   altivec   : 15801.600 MB/sec

I tested this against an array created without the patch, and also
verified it worked as expected on a little endian kernel.

[ Fix !CONFIG_ALTIVEC build -- BenH ]

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/xor.h |  67 ++++++++++++++++
 arch/powerpc/lib/Makefile      |   3 +
 arch/powerpc/lib/xor_vmx.c     | 177 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 247 insertions(+)
 create mode 100644 arch/powerpc/lib/xor_vmx.c

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/xor.h b/arch/powerpc/include/asm/xor.h
index c82eb12a5b18..0abb97f3be10 100644
--- a/arch/powerpc/include/asm/xor.h
+++ b/arch/powerpc/include/asm/xor.h
@@ -1 +1,68 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2012
+ *
+ * Author: Anton Blanchard <anton@au.ibm.com>
+ */
+#ifndef _ASM_POWERPC_XOR_H
+#define _ASM_POWERPC_XOR_H
+
+#ifdef CONFIG_ALTIVEC
+
+#include <asm/cputable.h>
+
+void xor_altivec_2(unsigned long bytes, unsigned long *v1_in,
+		   unsigned long *v2_in);
+void xor_altivec_3(unsigned long bytes, unsigned long *v1_in,
+		   unsigned long *v2_in, unsigned long *v3_in);
+void xor_altivec_4(unsigned long bytes, unsigned long *v1_in,
+		   unsigned long *v2_in, unsigned long *v3_in,
+		   unsigned long *v4_in);
+void xor_altivec_5(unsigned long bytes, unsigned long *v1_in,
+		   unsigned long *v2_in, unsigned long *v3_in,
+		   unsigned long *v4_in, unsigned long *v5_in);
+
+static struct xor_block_template xor_block_altivec = {
+	.name = "altivec",
+	.do_2 = xor_altivec_2,
+	.do_3 = xor_altivec_3,
+	.do_4 = xor_altivec_4,
+	.do_5 = xor_altivec_5,
+};
+
+#define XOR_SPEED_ALTIVEC()				\
+	do {						\
+		if (cpu_has_feature(CPU_FTR_ALTIVEC))	\
+			xor_speed(&xor_block_altivec);	\
+	} while (0)
+#else
+#define XOR_SPEED_ALTIVEC()
+#endif
+
+/* Also try the generic routines. */
 #include <asm-generic/xor.h>
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES				\
+do {							\
+	xor_speed(&xor_block_8regs);			\
+	xor_speed(&xor_block_8regs_p);			\
+	xor_speed(&xor_block_32regs);			\
+	xor_speed(&xor_block_32regs_p);			\
+	XOR_SPEED_ALTIVEC();				\
+} while (0)
+
+#endif /* _ASM_POWERPC_XOR_H */
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 5310132856c1..95a20e17dbff 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -39,3 +39,6 @@ obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o
 obj-y			+= code-patching.o
 obj-y			+= feature-fixups.o
 obj-$(CONFIG_FTR_FIXUP_SELFTEST) += feature-fixups-test.o
+
+obj-$(CONFIG_ALTIVEC)	+= xor_vmx.o
+CFLAGS_xor_vmx.o += -maltivec -mabi=altivec
diff --git a/arch/powerpc/lib/xor_vmx.c b/arch/powerpc/lib/xor_vmx.c
new file mode 100644
index 000000000000..e905f7c2ea7b
--- /dev/null
+++ b/arch/powerpc/lib/xor_vmx.c
@@ -0,0 +1,177 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2012
+ *
+ * Author: Anton Blanchard <anton@au.ibm.com>
+ */
+#include <altivec.h>
+
+#include <linux/preempt.h>
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <asm/switch_to.h>
+
+typedef vector signed char unative_t;
+
+#define DEFINE(V)				\
+	unative_t *V = (unative_t *)V##_in;	\
+	unative_t V##_0, V##_1, V##_2, V##_3
+
+#define LOAD(V)			\
+	do {			\
+		V##_0 = V[0];	\
+		V##_1 = V[1];	\
+		V##_2 = V[2];	\
+		V##_3 = V[3];	\
+	} while (0)
+
+#define STORE(V)		\
+	do {			\
+		V[0] = V##_0;	\
+		V[1] = V##_1;	\
+		V[2] = V##_2;	\
+		V[3] = V##_3;	\
+	} while (0)
+
+#define XOR(V1, V2)					\
+	do {						\
+		V1##_0 = vec_xor(V1##_0, V2##_0);	\
+		V1##_1 = vec_xor(V1##_1, V2##_1);	\
+		V1##_2 = vec_xor(V1##_2, V2##_2);	\
+		V1##_3 = vec_xor(V1##_3, V2##_3);	\
+	} while (0)
+
+void xor_altivec_2(unsigned long bytes, unsigned long *v1_in,
+		   unsigned long *v2_in)
+{
+	DEFINE(v1);
+	DEFINE(v2);
+	unsigned long lines = bytes / (sizeof(unative_t)) / 4;
+
+	preempt_disable();
+	enable_kernel_altivec();
+
+	do {
+		LOAD(v1);
+		LOAD(v2);
+		XOR(v1, v2);
+		STORE(v1);
+
+		v1 += 4;
+		v2 += 4;
+	} while (--lines > 0);
+
+	preempt_enable();
+}
+EXPORT_SYMBOL(xor_altivec_2);
+
+void xor_altivec_3(unsigned long bytes, unsigned long *v1_in,
+		   unsigned long *v2_in, unsigned long *v3_in)
+{
+	DEFINE(v1);
+	DEFINE(v2);
+	DEFINE(v3);
+	unsigned long lines = bytes / (sizeof(unative_t)) / 4;
+
+	preempt_disable();
+	enable_kernel_altivec();
+
+	do {
+		LOAD(v1);
+		LOAD(v2);
+		LOAD(v3);
+		XOR(v1, v2);
+		XOR(v1, v3);
+		STORE(v1);
+
+		v1 += 4;
+		v2 += 4;
+		v3 += 4;
+	} while (--lines > 0);
+
+	preempt_enable();
+}
+EXPORT_SYMBOL(xor_altivec_3);
+
+void xor_altivec_4(unsigned long bytes, unsigned long *v1_in,
+		   unsigned long *v2_in, unsigned long *v3_in,
+		   unsigned long *v4_in)
+{
+	DEFINE(v1);
+	DEFINE(v2);
+	DEFINE(v3);
+	DEFINE(v4);
+	unsigned long lines = bytes / (sizeof(unative_t)) / 4;
+
+	preempt_disable();
+	enable_kernel_altivec();
+
+	do {
+		LOAD(v1);
+		LOAD(v2);
+		LOAD(v3);
+		LOAD(v4);
+		XOR(v1, v2);
+		XOR(v3, v4);
+		XOR(v1, v3);
+		STORE(v1);
+
+		v1 += 4;
+		v2 += 4;
+		v3 += 4;
+		v4 += 4;
+	} while (--lines > 0);
+
+	preempt_enable();
+}
+EXPORT_SYMBOL(xor_altivec_4);
+
+void xor_altivec_5(unsigned long bytes, unsigned long *v1_in,
+		   unsigned long *v2_in, unsigned long *v3_in,
+		   unsigned long *v4_in, unsigned long *v5_in)
+{
+	DEFINE(v1);
+	DEFINE(v2);
+	DEFINE(v3);
+	DEFINE(v4);
+	DEFINE(v5);
+	unsigned long lines = bytes / (sizeof(unative_t)) / 4;
+
+	preempt_disable();
+	enable_kernel_altivec();
+
+	do {
+		LOAD(v1);
+		LOAD(v2);
+		LOAD(v3);
+		LOAD(v4);
+		LOAD(v5);
+		XOR(v1, v2);
+		XOR(v3, v4);
+		XOR(v1, v5);
+		XOR(v1, v3);
+		STORE(v1);
+
+		v1 += 4;
+		v2 += 4;
+		v3 += 4;
+		v4 += 4;
+		v5 += 4;
+	} while (--lines > 0);
+
+	preempt_enable();
+}
+EXPORT_SYMBOL(xor_altivec_5);
-- 
cgit v1.2.3


From 6f68b5e2c6c04e9cf0e3074f884da36957ce9aae Mon Sep 17 00:00:00 2001
From: Vasant Hegde
Date: Tue, 27 Aug 2013 15:09:52 +0530
Subject: powerpc/powernv: Create opal sysfs directory

Create /sys/firmware/opal directory. We wil use this
interface to fetch opal error logs, firmware update, etc.

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/opal.h       |  3 +++
 arch/powerpc/platforms/powernv/opal.c | 19 +++++++++++++++++++
 2 files changed, 22 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 4cc33ba1edd3..ee0efd2f2abc 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -601,6 +601,9 @@ typedef struct oppanel_line {
 	uint64_t 	line_len;
 } oppanel_line_t;
 
+/* /sys/firmware/opal */
+extern struct kobject *opal_kobj;
+
 /* API functions */
 int64_t opal_console_write(int64_t term_number, __be64 *length,
 			   const uint8_t *buffer);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 09336f0c54c5..37f06580709a 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -17,11 +17,15 @@
 #include <linux/interrupt.h>
 #include <linux/notifier.h>
 #include <linux/slab.h>
+#include <linux/kobject.h>
 #include <asm/opal.h>
 #include <asm/firmware.h>
 
 #include "powernv.h"
 
+/* /sys/firmware/opal */
+struct kobject *opal_kobj;
+
 struct opal {
 	u64 base;
 	u64 entry;
@@ -375,6 +379,17 @@ static irqreturn_t opal_interrupt(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static int opal_sysfs_init(void)
+{
+	opal_kobj = kobject_create_and_add("opal", firmware_kobj);
+	if (!opal_kobj) {
+		pr_warn("kobject_create_and_add opal failed\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
 static int __init opal_init(void)
 {
 	struct device_node *np, *consoles;
@@ -420,6 +435,10 @@ static int __init opal_init(void)
 				   " (0x%x)\n", rc, irq, hwirq);
 		opal_irqs[i] = irq;
 	}
+
+	/* Create "opal" kobject under /sys/firmware */
+	rc = opal_sysfs_init();
+
 	return 0;
 }
 subsys_initcall(opal_init);
-- 
cgit v1.2.3


From 50bd6153d1a68354a0a0c8bca1fe949fa8875875 Mon Sep 17 00:00:00 2001
From: Vasant Hegde
Date: Thu, 24 Oct 2013 16:04:58 +0530
Subject: powerpc/powernv: Code update interface

Code update interface for powernv platform. This provides
sysfs interface to pass new image, validate, update and
commit images.

This patch includes:
  - Below OPAL APIs for code update
    - opal_validate_flash()
    - opal_manage_flash()
    - opal_update_flash()

  - Create below sysfs files under /sys/firmware/opal
    - image		: Interface to pass new FW image
    - validate_flash	: Validate candidate image
    - manage_flash	: Commit/Reject operations
    - update_flash	: Flash new candidate image

Updating Image:
  "update_flash" is an interface to indicate flash new FW.
It just passes image SG list to FW. Actual flashing is done
during system reboot time.

Note:
  - SG entry format:
    I have kept version number to keep this list similar to what
    PAPR is defined.

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/opal.h                |   7 +
 arch/powerpc/platforms/powernv/Makefile        |   3 +-
 arch/powerpc/platforms/powernv/opal-flash.c    | 667 +++++++++++++++++++++++++
 arch/powerpc/platforms/powernv/opal-wrappers.S |   3 +
 arch/powerpc/platforms/powernv/opal.c          |   4 +
 5 files changed, 683 insertions(+), 1 deletion(-)
 create mode 100644 arch/powerpc/platforms/powernv/opal-flash.c

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index ee0efd2f2abc..033c06be1d84 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -129,6 +129,9 @@ extern int opal_enter_rtas(struct rtas_args *args,
 #define OPAL_LPC_READ				67
 #define OPAL_LPC_WRITE				68
 #define OPAL_RETURN_CPU				69
+#define OPAL_FLASH_VALIDATE			76
+#define OPAL_FLASH_MANAGE			77
+#define OPAL_FLASH_UPDATE			78
 
 #ifndef __ASSEMBLY__
 
@@ -724,6 +727,9 @@ int64_t opal_lpc_write(uint32_t chip_id, enum OpalLPCAddressType addr_type,
 		       uint32_t addr, uint32_t data, uint32_t sz);
 int64_t opal_lpc_read(uint32_t chip_id, enum OpalLPCAddressType addr_type,
 		      uint32_t addr, uint32_t *data, uint32_t sz);
+int64_t opal_validate_flash(uint64_t buffer, uint32_t *size, uint32_t *result);
+int64_t opal_manage_flash(uint8_t op);
+int64_t opal_update_flash(uint64_t blk_list);
 
 /* Internal functions */
 extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data);
@@ -752,6 +758,7 @@ extern int opal_set_rtc_time(struct rtc_time *tm);
 extern void opal_get_rtc_time(struct rtc_time *tm);
 extern unsigned long opal_get_boot_time(void);
 extern void opal_nvram_init(void);
+extern void opal_flash_init(void);
 
 extern int opal_machine_check(struct pt_regs *regs);
 
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 050d57e0c788..873fa1370dc4 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -1,5 +1,6 @@
 obj-y			+= setup.o opal-takeover.o opal-wrappers.o opal.o
-obj-y			+= opal-rtc.o opal-nvram.o opal-lpc.o rng.o
+obj-y			+= opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
+obj-y			+= rng.o
 
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_PCI)	+= pci.o pci-p5ioc2.o pci-ioda.o
diff --git a/arch/powerpc/platforms/powernv/opal-flash.c b/arch/powerpc/platforms/powernv/opal-flash.c
new file mode 100644
index 000000000000..6ffa6b1ec5b7
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-flash.c
@@ -0,0 +1,667 @@
+/*
+ * PowerNV OPAL Firmware Update Interface
+ *
+ * Copyright 2013 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+
+#include <asm/opal.h>
+
+/* FLASH status codes */
+#define FLASH_NO_OP		-1099	/* No operation initiated by user */
+#define FLASH_NO_AUTH		-9002	/* Not a service authority partition */
+
+/* Validate image status values */
+#define VALIDATE_IMG_READY	-1001	/* Image ready for validation */
+#define VALIDATE_IMG_INCOMPLETE	-1002	/* User copied < VALIDATE_BUF_SIZE */
+
+/* Manage image status values */
+#define MANAGE_ACTIVE_ERR	-9001	/* Cannot overwrite active img */
+
+/* Flash image status values */
+#define FLASH_IMG_READY		0	/* Img ready for flash on reboot */
+#define FLASH_INVALID_IMG	-1003	/* Flash image shorter than expected */
+#define FLASH_IMG_NULL_DATA	-1004	/* Bad data in sg list entry */
+#define FLASH_IMG_BAD_LEN	-1005	/* Bad length in sg list entry */
+
+/* Manage operation tokens */
+#define FLASH_REJECT_TMP_SIDE	0	/* Reject temporary fw image */
+#define FLASH_COMMIT_TMP_SIDE	1	/* Commit temporary fw image */
+
+/* Update tokens */
+#define FLASH_UPDATE_CANCEL	0	/* Cancel update request */
+#define FLASH_UPDATE_INIT	1	/* Initiate update */
+
+/* Validate image update result tokens */
+#define VALIDATE_TMP_UPDATE	0     /* T side will be updated */
+#define VALIDATE_FLASH_AUTH	1     /* Partition does not have authority */
+#define VALIDATE_INVALID_IMG	2     /* Candidate image is not valid */
+#define VALIDATE_CUR_UNKNOWN	3     /* Current fixpack level is unknown */
+/*
+ * Current T side will be committed to P side before being replace with new
+ * image, and the new image is downlevel from current image
+ */
+#define VALIDATE_TMP_COMMIT_DL	4
+/*
+ * Current T side will be committed to P side before being replaced with new
+ * image
+ */
+#define VALIDATE_TMP_COMMIT	5
+/*
+ * T side will be updated with a downlevel image
+ */
+#define VALIDATE_TMP_UPDATE_DL	6
+/*
+ * The candidate image's release date is later than the system's firmware
+ * service entitlement date - service warranty period has expired
+ */
+#define VALIDATE_OUT_OF_WRNTY	7
+
+/* Validate buffer size */
+#define VALIDATE_BUF_SIZE	4096
+
+/* XXX: Assume candidate image size is <= 256MB */
+#define MAX_IMAGE_SIZE	0x10000000
+
+/* Flash sg list version */
+#define SG_LIST_VERSION (1UL)
+
+/* Image status */
+enum {
+	IMAGE_INVALID,
+	IMAGE_LOADING,
+	IMAGE_READY,
+};
+
+/* Candidate image data */
+struct image_data_t {
+	int		status;
+	void		*data;
+	uint32_t	size;
+};
+
+/* Candidate image header */
+struct image_header_t {
+	uint16_t	magic;
+	uint16_t	version;
+	uint32_t	size;
+};
+
+/* Scatter/gather entry */
+struct opal_sg_entry {
+	void	*data;
+	long	length;
+};
+
+/* We calculate number of entries based on PAGE_SIZE */
+#define SG_ENTRIES_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct opal_sg_entry))
+
+/*
+ * This struct is very similar but not identical to that
+ * needed by the opal flash update. All we need to do for
+ * opal is rewrite num_entries into a version/length and
+ * translate the pointers to absolute.
+ */
+struct opal_sg_list {
+	unsigned long num_entries;
+	struct opal_sg_list *next;
+	struct opal_sg_entry entry[SG_ENTRIES_PER_NODE];
+};
+
+struct validate_flash_t {
+	int		status;		/* Return status */
+	void		*buf;		/* Candiate image buffer */
+	uint32_t	buf_size;	/* Image size */
+	uint32_t	result;		/* Update results token */
+};
+
+struct manage_flash_t {
+	int status;		/* Return status */
+};
+
+struct update_flash_t {
+	int status;		/* Return status */
+};
+
+static struct image_header_t	image_header;
+static struct image_data_t	image_data;
+static struct validate_flash_t	validate_flash_data;
+static struct manage_flash_t	manage_flash_data;
+static struct update_flash_t	update_flash_data;
+
+static DEFINE_MUTEX(image_data_mutex);
+
+/*
+ * Validate candidate image
+ */
+static inline void opal_flash_validate(void)
+{
+	struct validate_flash_t *args_buf = &validate_flash_data;
+
+	args_buf->status = opal_validate_flash(__pa(args_buf->buf),
+					       &(args_buf->buf_size),
+					       &(args_buf->result));
+}
+
+/*
+ * Validate output format:
+ *     validate result token
+ *     current image version details
+ *     new image version details
+ */
+static ssize_t validate_show(struct kobject *kobj,
+			     struct kobj_attribute *attr, char *buf)
+{
+	struct validate_flash_t *args_buf = &validate_flash_data;
+	int len;
+
+	/* Candidate image is not validated */
+	if (args_buf->status < VALIDATE_TMP_UPDATE) {
+		len = sprintf(buf, "%d\n", args_buf->status);
+		goto out;
+	}
+
+	/* Result token */
+	len = sprintf(buf, "%d\n", args_buf->result);
+
+	/* Current and candidate image version details */
+	if ((args_buf->result != VALIDATE_TMP_UPDATE) &&
+	    (args_buf->result < VALIDATE_CUR_UNKNOWN))
+		goto out;
+
+	if (args_buf->buf_size > (VALIDATE_BUF_SIZE - len)) {
+		memcpy(buf + len, args_buf->buf, VALIDATE_BUF_SIZE - len);
+		len = VALIDATE_BUF_SIZE;
+	} else {
+		memcpy(buf + len, args_buf->buf, args_buf->buf_size);
+		len += args_buf->buf_size;
+	}
+out:
+	/* Set status to default */
+	args_buf->status = FLASH_NO_OP;
+	return len;
+}
+
+/*
+ * Validate candidate firmware image
+ *
+ * Note:
+ *   We are only interested in first 4K bytes of the
+ *   candidate image.
+ */
+static ssize_t validate_store(struct kobject *kobj,
+			      struct kobj_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct validate_flash_t *args_buf = &validate_flash_data;
+
+	if (buf[0] != '1')
+		return -EINVAL;
+
+	mutex_lock(&image_data_mutex);
+
+	if (image_data.status != IMAGE_READY ||
+	    image_data.size < VALIDATE_BUF_SIZE) {
+		args_buf->result = VALIDATE_INVALID_IMG;
+		args_buf->status = VALIDATE_IMG_INCOMPLETE;
+		goto out;
+	}
+
+	/* Copy first 4k bytes of candidate image */
+	memcpy(args_buf->buf, image_data.data, VALIDATE_BUF_SIZE);
+
+	args_buf->status = VALIDATE_IMG_READY;
+	args_buf->buf_size = VALIDATE_BUF_SIZE;
+
+	/* Validate candidate image */
+	opal_flash_validate();
+
+out:
+	mutex_unlock(&image_data_mutex);
+	return count;
+}
+
+/*
+ * Manage flash routine
+ */
+static inline void opal_flash_manage(uint8_t op)
+{
+	struct manage_flash_t *const args_buf = &manage_flash_data;
+
+	args_buf->status = opal_manage_flash(op);
+}
+
+/*
+ * Show manage flash status
+ */
+static ssize_t manage_show(struct kobject *kobj,
+			   struct kobj_attribute *attr, char *buf)
+{
+	struct manage_flash_t *const args_buf = &manage_flash_data;
+	int rc;
+
+	rc = sprintf(buf, "%d\n", args_buf->status);
+	/* Set status to default*/
+	args_buf->status = FLASH_NO_OP;
+	return rc;
+}
+
+/*
+ * Manage operations:
+ *   0 - Reject
+ *   1 - Commit
+ */
+static ssize_t manage_store(struct kobject *kobj,
+			    struct kobj_attribute *attr,
+			    const char *buf, size_t count)
+{
+	uint8_t op;
+	switch (buf[0]) {
+	case '0':
+		op = FLASH_REJECT_TMP_SIDE;
+		break;
+	case '1':
+		op = FLASH_COMMIT_TMP_SIDE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* commit/reject temporary image */
+	opal_flash_manage(op);
+	return count;
+}
+
+/*
+ * Free sg list
+ */
+static void free_sg_list(struct opal_sg_list *list)
+{
+	struct opal_sg_list *sg1;
+	while (list) {
+		sg1 = list->next;
+		kfree(list);
+		list = sg1;
+	}
+	list = NULL;
+}
+
+/*
+ * Build candidate image scatter gather list
+ *
+ * list format:
+ *   -----------------------------------
+ *  |  VER (8) | Entry length in bytes  |
+ *   -----------------------------------
+ *  |  Pointer to next entry            |
+ *   -----------------------------------
+ *  |  Address of memory area 1         |
+ *   -----------------------------------
+ *  |  Length of memory area 1          |
+ *   -----------------------------------
+ *  |   .........                       |
+ *   -----------------------------------
+ *  |   .........                       |
+ *   -----------------------------------
+ *  |  Address of memory area N         |
+ *   -----------------------------------
+ *  |  Length of memory area N          |
+ *   -----------------------------------
+ */
+static struct opal_sg_list *image_data_to_sglist(void)
+{
+	struct opal_sg_list *sg1, *list = NULL;
+	void *addr;
+	int size;
+
+	addr = image_data.data;
+	size = image_data.size;
+
+	sg1 = kzalloc((sizeof(struct opal_sg_list)), GFP_KERNEL);
+	if (!sg1)
+		return NULL;
+
+	list = sg1;
+	sg1->num_entries = 0;
+	while (size > 0) {
+		/* Translate virtual address to physical address */
+		sg1->entry[sg1->num_entries].data =
+			(void *)(vmalloc_to_pfn(addr) << PAGE_SHIFT);
+
+		if (size > PAGE_SIZE)
+			sg1->entry[sg1->num_entries].length = PAGE_SIZE;
+		else
+			sg1->entry[sg1->num_entries].length = size;
+
+		sg1->num_entries++;
+		if (sg1->num_entries >= SG_ENTRIES_PER_NODE) {
+			sg1->next = kzalloc((sizeof(struct opal_sg_list)),
+					    GFP_KERNEL);
+			if (!sg1->next) {
+				pr_err("%s : Failed to allocate memory\n",
+				       __func__);
+				goto nomem;
+			}
+
+			sg1 = sg1->next;
+			sg1->num_entries = 0;
+		}
+		addr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+	return list;
+nomem:
+	free_sg_list(list);
+	return NULL;
+}
+
+/*
+ * OPAL update flash
+ */
+static int opal_flash_update(int op)
+{
+	struct opal_sg_list *sg, *list, *next;
+	unsigned long addr;
+	int64_t rc = OPAL_PARAMETER;
+
+	if (op == FLASH_UPDATE_CANCEL) {
+		pr_alert("FLASH: Image update cancelled\n");
+		addr = '\0';
+		goto flash;
+	}
+
+	list = image_data_to_sglist();
+	if (!list)
+		goto invalid_img;
+
+	/* First entry address */
+	addr = __pa(list);
+
+	/* Translate sg list address to absolute */
+	for (sg = list; sg; sg = next) {
+		next = sg->next;
+		/* Don't translate NULL pointer for last entry */
+		if (sg->next)
+			sg->next = (struct opal_sg_list *)__pa(sg->next);
+		else
+			sg->next = NULL;
+
+		/* Make num_entries into the version/length field */
+		sg->num_entries = (SG_LIST_VERSION << 56) |
+			(sg->num_entries * sizeof(struct opal_sg_entry) + 16);
+	}
+
+	pr_alert("FLASH: Image is %u bytes\n", image_data.size);
+	pr_alert("FLASH: Image update requested\n");
+	pr_alert("FLASH: Image will be updated during system reboot\n");
+	pr_alert("FLASH: This will take several minutes. Do not power off!\n");
+
+flash:
+	rc = opal_update_flash(addr);
+
+invalid_img:
+	return rc;
+}
+
+/*
+ * Show candidate image status
+ */
+static ssize_t update_show(struct kobject *kobj,
+			   struct kobj_attribute *attr, char *buf)
+{
+	struct update_flash_t *const args_buf = &update_flash_data;
+	return sprintf(buf, "%d\n", args_buf->status);
+}
+
+/*
+ * Set update image flag
+ *  1 - Flash new image
+ *  0 - Cancel flash request
+ */
+static ssize_t update_store(struct kobject *kobj,
+			    struct kobj_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct update_flash_t *const args_buf = &update_flash_data;
+	int rc = count;
+
+	mutex_lock(&image_data_mutex);
+
+	switch (buf[0]) {
+	case '0':
+		if (args_buf->status == FLASH_IMG_READY)
+			opal_flash_update(FLASH_UPDATE_CANCEL);
+		args_buf->status = FLASH_NO_OP;
+		break;
+	case '1':
+		/* Image is loaded? */
+		if (image_data.status == IMAGE_READY)
+			args_buf->status =
+				opal_flash_update(FLASH_UPDATE_INIT);
+		else
+			args_buf->status = FLASH_INVALID_IMG;
+		break;
+	default:
+		rc = -EINVAL;
+	}
+
+	mutex_unlock(&image_data_mutex);
+	return rc;
+}
+
+/*
+ * Free image buffer
+ */
+static void free_image_buf(void)
+{
+	void *addr;
+	int size;
+
+	addr = image_data.data;
+	size = PAGE_ALIGN(image_data.size);
+	while (size > 0) {
+		ClearPageReserved(vmalloc_to_page(addr));
+		addr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+	vfree(image_data.data);
+	image_data.data = NULL;
+	image_data.status = IMAGE_INVALID;
+}
+
+/*
+ * Allocate image buffer.
+ */
+static int alloc_image_buf(char *buffer, size_t count)
+{
+	void *addr;
+	int size;
+
+	if (count < sizeof(struct image_header_t)) {
+		pr_warn("FLASH: Invalid candidate image\n");
+		return -EINVAL;
+	}
+
+	memcpy(&image_header, (void *)buffer, sizeof(struct image_header_t));
+	image_data.size = be32_to_cpu(image_header.size);
+	pr_debug("FLASH: Candiate image size = %u\n", image_data.size);
+
+	if (image_data.size > MAX_IMAGE_SIZE) {
+		pr_warn("FLASH: Too large image\n");
+		return -EINVAL;
+	}
+	if (image_data.size < VALIDATE_BUF_SIZE) {
+		pr_warn("FLASH: Image is shorter than expected\n");
+		return -EINVAL;
+	}
+
+	image_data.data = vzalloc(PAGE_ALIGN(image_data.size));
+	if (!image_data.data) {
+		pr_err("%s : Failed to allocate memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	/* Pin memory */
+	addr = image_data.data;
+	size = PAGE_ALIGN(image_data.size);
+	while (size > 0) {
+		SetPageReserved(vmalloc_to_page(addr));
+		addr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+
+	image_data.status = IMAGE_LOADING;
+	return 0;
+}
+
+/*
+ * Copy candidate image
+ *
+ * Parse candidate image header to get total image size
+ * and pre-allocate required memory.
+ */
+static ssize_t image_data_write(struct file *filp, struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buffer, loff_t pos, size_t count)
+{
+	int rc;
+
+	mutex_lock(&image_data_mutex);
+
+	/* New image ? */
+	if (pos == 0) {
+		/* Free memory, if already allocated */
+		if (image_data.data)
+			free_image_buf();
+
+		/* Cancel outstanding image update request */
+		if (update_flash_data.status == FLASH_IMG_READY)
+			opal_flash_update(FLASH_UPDATE_CANCEL);
+
+		/* Allocate memory */
+		rc = alloc_image_buf(buffer, count);
+		if (rc)
+			goto out;
+	}
+
+	if (image_data.status != IMAGE_LOADING) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	if ((pos + count) > image_data.size) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	memcpy(image_data.data + pos, (void *)buffer, count);
+	rc = count;
+
+	/* Set image status */
+	if ((pos + count) == image_data.size) {
+		pr_debug("FLASH: Candidate image loaded....\n");
+		image_data.status = IMAGE_READY;
+	}
+
+out:
+	mutex_unlock(&image_data_mutex);
+	return rc;
+}
+
+/*
+ * sysfs interface :
+ *  OPAL uses below sysfs files for code update.
+ *  We create these files under /sys/firmware/opal.
+ *
+ *   image		: Interface to load candidate firmware image
+ *   validate_flash	: Validate firmware image
+ *   manage_flash	: Commit/Reject firmware image
+ *   update_flash	: Flash new firmware image
+ *
+ */
+static struct bin_attribute image_data_attr = {
+	.attr = {.name = "image", .mode = 0200},
+	.size = MAX_IMAGE_SIZE,	/* Limit image size */
+	.write = image_data_write,
+};
+
+static struct kobj_attribute validate_attribute =
+	__ATTR(validate_flash, 0600, validate_show, validate_store);
+
+static struct kobj_attribute manage_attribute =
+	__ATTR(manage_flash, 0600, manage_show, manage_store);
+
+static struct kobj_attribute update_attribute =
+	__ATTR(update_flash, 0600, update_show, update_store);
+
+static struct attribute *image_op_attrs[] = {
+	&validate_attribute.attr,
+	&manage_attribute.attr,
+	&update_attribute.attr,
+	NULL	/* need to NULL terminate the list of attributes */
+};
+
+static struct attribute_group image_op_attr_group = {
+	.attrs = image_op_attrs,
+};
+
+void __init opal_flash_init(void)
+{
+	int ret;
+
+	/* Allocate validate image buffer */
+	validate_flash_data.buf = kzalloc(VALIDATE_BUF_SIZE, GFP_KERNEL);
+	if (!validate_flash_data.buf) {
+		pr_err("%s : Failed to allocate memory\n", __func__);
+		return;
+	}
+
+	/* Make sure /sys/firmware/opal directory is created */
+	if (!opal_kobj) {
+		pr_warn("FLASH: opal kobject is not available\n");
+		goto nokobj;
+	}
+
+	/* Create the sysfs files */
+	ret = sysfs_create_group(opal_kobj, &image_op_attr_group);
+	if (ret) {
+		pr_warn("FLASH: Failed to create sysfs files\n");
+		goto nokobj;
+	}
+
+	ret = sysfs_create_bin_file(opal_kobj, &image_data_attr);
+	if (ret) {
+		pr_warn("FLASH: Failed to create sysfs files\n");
+		goto nosysfs_file;
+	}
+
+	/* Set default status */
+	validate_flash_data.status = FLASH_NO_OP;
+	manage_flash_data.status = FLASH_NO_OP;
+	update_flash_data.status = FLASH_NO_OP;
+	image_data.status = IMAGE_INVALID;
+	return;
+
+nosysfs_file:
+	sysfs_remove_group(opal_kobj, &image_op_attr_group);
+
+nokobj:
+	kfree(validate_flash_data.buf);
+	return;
+}
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 403d05840625..e7806504e976 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -123,3 +123,6 @@ OPAL_CALL(opal_xscom_write,			OPAL_XSCOM_WRITE);
 OPAL_CALL(opal_lpc_read,			OPAL_LPC_READ);
 OPAL_CALL(opal_lpc_write,			OPAL_LPC_WRITE);
 OPAL_CALL(opal_return_cpu,			OPAL_RETURN_CPU);
+OPAL_CALL(opal_validate_flash,			OPAL_FLASH_VALIDATE);
+OPAL_CALL(opal_manage_flash,			OPAL_FLASH_MANAGE);
+OPAL_CALL(opal_update_flash,			OPAL_FLASH_UPDATE);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 37f06580709a..b56c243aaee9 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -438,6 +438,10 @@ static int __init opal_init(void)
 
 	/* Create "opal" kobject under /sys/firmware */
 	rc = opal_sysfs_init();
+	if (rc == 0) {
+		/* Setup code update interface */
+		opal_flash_init();
+	}
 
 	return 0;
 }
-- 
cgit v1.2.3


From 45d20e8348969a165c53cfb91f445e7cc599a9f0 Mon Sep 17 00:00:00 2001
From: Gerhard Sittig
Date: Fri, 27 Sep 2013 17:28:38 +0200
Subject: powerpc/mpc512x: silence build warning upon disabled DIU

a disabled Kconfig option results in a reference to a not implemented
routine when the IS_ENABLED() macro is used for both conditional
implementation of the routine as well as a C language source code test
at the call site -- the "if (0) func();" construct only gets eliminated
later by the optimizer, while the compiler already has emitted its
warning about "func()" being undeclared

provide an empty implementation for the mpc512x_setup_diu() and
mpc512x_init_diu() routines in case of the disabled option, to avoid the
compiler warning which is considered fatal and breaks compilation

the bug appeared with commit 2abbbb63c90ab55ca3f054772c2e5ba7df810c48
"powerpc/mpc512x: move common code to shared.c file", how to reproduce:

  make mpc512x_defconfig
  echo CONFIG_FB_FSL_DIU=n >> .config && make olddefconfig
  make

    CC      arch/powerpc/platforms/512x/mpc512x_shared.o
  .../arch/powerpc/platforms/512x/mpc512x_shared.c: In function 'mpc512x_init_early':
  .../arch/powerpc/platforms/512x/mpc512x_shared.c:456:3: error: implicit declaration of function 'mpc512x_init_diu' [-Werror=implicit-function-declaration]
  .../arch/powerpc/platforms/512x/mpc512x_shared.c: In function 'mpc512x_setup_arch':
  .../arch/powerpc/platforms/512x/mpc512x_shared.c:469:3: error: implicit declaration of function 'mpc512x_setup_diu' [-Werror=implicit-function-declaration]
  cc1: all warnings being treated as errors
  make[4]: *** [arch/powerpc/platforms/512x/mpc512x_shared.o] Error 1

Signed-off-by: Gerhard Sittig <gsi@denx.de>
CC: <stable@vger.kernel.org> # v3.11
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 arch/powerpc/platforms/512x/mpc512x_shared.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
index a82a41b4fd91..1a7b1d0f41df 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -303,6 +303,9 @@ void __init mpc512x_setup_diu(void)
 	diu_ops.release_bootmem		= mpc512x_release_bootmem;
 }
 
+#else
+void __init mpc512x_setup_diu(void) { /* EMPTY */ }
+void __init mpc512x_init_diu(void) { /* EMPTY */ }
 #endif
 
 void __init mpc512x_init_IRQ(void)
-- 
cgit v1.2.3


From 509a02df44df8454b96da0b9bfcaa19f0a349df6 Mon Sep 17 00:00:00 2001
From: Wolfram Sang
Date: Fri, 4 Oct 2013 17:37:09 +0200
Subject: Kind of revert "powerpc: 52xx: provide a default in
 mpc52xx_irqhost_map()"

This more or less reverts commit 6391f697d4892a6f233501beea553e13f7745a23.
Instead of adding an unneeded 'default', mark the variable to prevent
the false positive 'uninitialized var'. The other change (fixing the
printout) needs revert, too. We want to know WHICH critical irq failed,
not which level it had.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Anatolij Gustschin <agust@denx.de>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 arch/powerpc/platforms/52xx/mpc52xx_pic.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
index b69221ba07fd..2898b737deb7 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
@@ -340,7 +340,7 @@ static int mpc52xx_irqhost_map(struct irq_domain *h, unsigned int virq,
 {
 	int l1irq;
 	int l2irq;
-	struct irq_chip *irqchip;
+	struct irq_chip *uninitialized_var(irqchip);
 	void *hndlr;
 	int type;
 	u32 reg;
@@ -373,9 +373,8 @@ static int mpc52xx_irqhost_map(struct irq_domain *h, unsigned int virq,
 	case MPC52xx_IRQ_L1_PERP: irqchip = &mpc52xx_periph_irqchip; break;
 	case MPC52xx_IRQ_L1_SDMA: irqchip = &mpc52xx_sdma_irqchip; break;
 	case MPC52xx_IRQ_L1_CRIT:
-	default:
 		pr_warn("%s: Critical IRQ #%d is unsupported! Nopping it.\n",
-			__func__, l1irq);
+			__func__, l2irq);
 		irq_set_chip(virq, &no_irq_chip);
 		return 0;
 	}
-- 
cgit v1.2.3


From 2bf75084f6d9f9a91ba6e30a501ff070d8a1acf6 Mon Sep 17 00:00:00 2001
From: Anatolij Gustschin
Date: Wed, 16 Oct 2013 13:11:27 +0200
Subject: powerpc/52xx: fix build breakage for MPC5200 LPBFIFO module

The MPC5200 LPBFIFO driver requires the bestcomm module to be
enabled, otherwise building will fail. Fix it.

Cc: <stable@vger.kernel.org> # 3.10+
Reported-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 arch/powerpc/platforms/52xx/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index 90f4496017e4..af54174801f7 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -57,5 +57,5 @@ config PPC_MPC5200_BUGFIX
 
 config PPC_MPC5200_LPBFIFO
 	tristate "MPC5200 LocalPlus bus FIFO driver"
-	depends on PPC_MPC52xx
+	depends on PPC_MPC52xx && PPC_BESTCOMM
 	select PPC_BESTCOMM_GEN_BD
-- 
cgit v1.2.3


From 7e198197ec878c720af4dc35c49c0c6a99b83f9f Mon Sep 17 00:00:00 2001
From: Brian Norris
Date: Fri, 11 Oct 2013 10:37:38 -0700
Subject: powerpc/mpc512x: remove unnecessary #if

Several functions are only ever referenced locally, so make them static.
Of those functions, many of them are protected by an #if. However, the
code which can compile fine in either case.

Now that (1) the unneeded code is marked 'static' and (2) the code is
only used under a C 'if (IS_ENABLED(CONFIG_FB_FSL_DIU))', the compiler
can automatically remove the unneeded code, and we don't need the #if or
the empty stub functions.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 arch/powerpc/platforms/512x/mpc512x_shared.c | 21 +++++++--------------
 arch/powerpc/sysdev/fsl_soc.h                |  3 ---
 2 files changed, 7 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
index 1a7b1d0f41df..36b5652aada2 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -60,8 +60,6 @@ void mpc512x_restart(char *cmd)
 		;
 }
 
-#if IS_ENABLED(CONFIG_FB_FSL_DIU)
-
 struct fsl_diu_shared_fb {
 	u8		gamma[0x300];	/* 32-bit aligned! */
 	struct diu_ad	ad0;		/* 32-bit aligned! */
@@ -71,7 +69,7 @@ struct fsl_diu_shared_fb {
 };
 
 #define DIU_DIV_MASK	0x000000ff
-void mpc512x_set_pixel_clock(unsigned int pixclock)
+static void mpc512x_set_pixel_clock(unsigned int pixclock)
 {
 	unsigned long bestval, bestfreq, speed, busfreq;
 	unsigned long minpixclock, maxpixclock, pixval;
@@ -164,7 +162,7 @@ void mpc512x_set_pixel_clock(unsigned int pixclock)
 	iounmap(ccm);
 }
 
-enum fsl_diu_monitor_port
+static enum fsl_diu_monitor_port
 mpc512x_valid_monitor_port(enum fsl_diu_monitor_port port)
 {
 	return FSL_DIU_PORT_DVI;
@@ -179,7 +177,7 @@ static inline void mpc512x_free_bootmem(struct page *page)
 	free_reserved_page(page);
 }
 
-void mpc512x_release_bootmem(void)
+static void mpc512x_release_bootmem(void)
 {
 	unsigned long addr = diu_shared_fb.fb_phys & PAGE_MASK;
 	unsigned long size = diu_shared_fb.fb_len;
@@ -205,7 +203,7 @@ void mpc512x_release_bootmem(void)
  * address range will be reserved in setup_arch() after bootmem
  * allocator is up.
  */
-void __init mpc512x_init_diu(void)
+static void __init mpc512x_init_diu(void)
 {
 	struct device_node *np;
 	struct diu __iomem *diu_reg;
@@ -274,7 +272,7 @@ out:
 	iounmap(diu_reg);
 }
 
-void __init mpc512x_setup_diu(void)
+static void __init mpc512x_setup_diu(void)
 {
 	int ret;
 
@@ -303,11 +301,6 @@ void __init mpc512x_setup_diu(void)
 	diu_ops.release_bootmem		= mpc512x_release_bootmem;
 }
 
-#else
-void __init mpc512x_setup_diu(void) { /* EMPTY */ }
-void __init mpc512x_init_diu(void) { /* EMPTY */ }
-#endif
-
 void __init mpc512x_init_IRQ(void)
 {
 	struct device_node *np;
@@ -340,7 +333,7 @@ static struct of_device_id __initdata of_bus_ids[] = {
 	{},
 };
 
-void __init mpc512x_declare_of_platform_devices(void)
+static void __init mpc512x_declare_of_platform_devices(void)
 {
 	if (of_platform_bus_probe(NULL, of_bus_ids, NULL))
 		printk(KERN_ERR __FILE__ ": "
@@ -390,7 +383,7 @@ static unsigned int __init get_fifo_size(struct device_node *np,
 		    ((u32)(_base) + sizeof(struct mpc52xx_psc)))
 
 /* Init PSC FIFO space for TX and RX slices */
-void __init mpc512x_psc_fifo_init(void)
+static void __init mpc512x_psc_fifo_init(void)
 {
 	struct device_node *np;
 	void __iomem *psc;
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index c6d00736f07f..4c5a19ef4f0b 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -21,8 +21,6 @@ struct device_node;
 
 extern void fsl_rstcr_restart(char *cmd);
 
-#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
-
 /* The different ports that the DIU can be connected to */
 enum fsl_diu_monitor_port {
 	FSL_DIU_PORT_DVI,	/* DVI */
@@ -43,7 +41,6 @@ struct platform_diu_data_ops {
 };
 
 extern struct platform_diu_data_ops diu_ops;
-#endif
 
 void fsl_hv_restart(char *cmd);
 void fsl_hv_halt(void);
-- 
cgit v1.2.3


From d68ce0177c1e51fb332369e0c99852a6d05668af Mon Sep 17 00:00:00 2001
From: David Rientjes
Date: Fri, 11 Oct 2013 16:07:31 -0700
Subject: x86, hyperv: Fix build error due to missing <asm/apic.h> include

9e7827b5ea4c ("x86, hyperv: Get the local APIC timer frequency from the
hypervisor") breaks the build with some configs because apic.h isn't
directly included:

arch/x86/kernel/cpu/mshyperv.c: In function 'ms_hyperv_init_platform':
arch/x86/kernel/cpu/mshyperv.c:90:3: error: 'lapic_timer_frequency' undeclared (first use in this function)
arch/x86/kernel/cpu/mshyperv.c:90:3: note: each undeclared identifier is reported only once for each function it appears in

Fix it by including asm/apic.h.

Signed-off-by: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1310111604160.31170@chino.kir.corp.google.com
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/cpu/mshyperv.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 628ff50ab75f..9f6e9f89d9d6 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -25,6 +25,7 @@
 #include <asm/idle.h>
 #include <asm/irq_regs.h>
 #include <asm/i8259.h>
+#include <asm/apic.h>
 
 struct ms_hyperv_info ms_hyperv;
 EXPORT_SYMBOL_GPL(ms_hyperv);
-- 
cgit v1.2.3


From 65f36f4149ce4490b2174ef45e1dbe494f4b8268 Mon Sep 17 00:00:00 2001
From: Cedric Le Goater
Date: Wed, 30 Oct 2013 14:47:06 +0100
Subject: powerpc/nvram: Scan partitions only once

nvram_scan_partitions() is called twice when initializing the "lnx,oops-log"
partition and the "ibm,rtas-log" partition. This fills the partition list
with duplicate entries. This patch moves the partition scan in the init
routine pseries_nvram_init_log_partitions() which is called only once.

Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/pseries/nvram.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index d276cd3edd8f..2498d4d801e8 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -429,9 +429,6 @@ static int __init pseries_nvram_init_os_partition(struct nvram_os_partition
 	loff_t p;
 	int size;
 
-	/* Scan nvram for partitions */
-	nvram_scan_partitions();
-
 	/* Look for ours */
 	p = nvram_find_partition(part->name, NVRAM_SIG_OS, &size);
 
@@ -795,6 +792,9 @@ static int __init pseries_nvram_init_log_partitions(void)
 {
 	int rc;
 
+	/* Scan nvram for partitions */
+	nvram_scan_partitions();
+
 	rc = pseries_nvram_init_os_partition(&rtas_log_partition);
 	nvram_init_oops_partition(rc == 0);
 	return 0;
-- 
cgit v1.2.3


From 563c5d8af5d56739bc31f9f4b1c8a0994ed5742c Mon Sep 17 00:00:00 2001
From: Cedric Le Goater
Date: Wed, 30 Oct 2013 14:47:07 +0100
Subject: powerpc/nvram: Fix endian issue when reading the NVRAM size

Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/chrp/nvram.c    | 4 ++--
 arch/powerpc/platforms/pseries/nvram.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/chrp/nvram.c b/arch/powerpc/platforms/chrp/nvram.c
index d3ceff04ffc7..9ef8cc3378d0 100644
--- a/arch/powerpc/platforms/chrp/nvram.c
+++ b/arch/powerpc/platforms/chrp/nvram.c
@@ -66,7 +66,7 @@ static void chrp_nvram_write(int addr, unsigned char val)
 void __init chrp_nvram_init(void)
 {
 	struct device_node *nvram;
-	const unsigned int *nbytes_p;
+	const __be32 *nbytes_p;
 	unsigned int proplen;
 
 	nvram = of_find_node_by_type(NULL, "nvram");
@@ -79,7 +79,7 @@ void __init chrp_nvram_init(void)
 		return;
 	}
 
-	nvram_size = *nbytes_p;
+	nvram_size = be32_to_cpup(nbytes_p);
 
 	printk(KERN_INFO "CHRP nvram contains %u bytes\n", nvram_size);
 	of_node_put(nvram);
diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index 2498d4d801e8..057fc894be51 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -804,7 +804,7 @@ machine_arch_initcall(pseries, pseries_nvram_init_log_partitions);
 int __init pSeries_nvram_init(void)
 {
 	struct device_node *nvram;
-	const unsigned int *nbytes_p;
+	const __be32 *nbytes_p;
 	unsigned int proplen;
 
 	nvram = of_find_node_by_type(NULL, "nvram");
@@ -817,7 +817,7 @@ int __init pSeries_nvram_init(void)
 		return -EIO;
 	}
 
-	nvram_size = *nbytes_p;
+	nvram_size = be32_to_cpup(nbytes_p);
 
 	nvram_fetch = rtas_token("nvram-fetch");
 	nvram_store = rtas_token("nvram-store");
-- 
cgit v1.2.3


From c81095a465b2c1cd819fb14ee3cd07bc1b377af1 Mon Sep 17 00:00:00 2001
From: Cedric Le Goater
Date: Wed, 30 Oct 2013 14:47:08 +0100
Subject: powerpc/nvram: Fix endian issue when using the partition length

When reading partitions, the length has to be translated from
big endian to the endian order of the host. Similarly, when writing
partitions, the length needs to be in big endian order.

The userspace tool 'nvram' needs a similar fix as it is reading
and writing partitions through /dev/nram :

    http://sourceforge.net/p/powerpc-utils/mailman/message/31571277/

Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/nvram_64.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c
index 8213ee1eb05a..fd82c289ab1c 100644
--- a/arch/powerpc/kernel/nvram_64.c
+++ b/arch/powerpc/kernel/nvram_64.c
@@ -223,9 +223,13 @@ static int __init nvram_write_header(struct nvram_partition * part)
 {
 	loff_t tmp_index;
 	int rc;
-	
+	struct nvram_header phead;
+
+	memcpy(&phead, &part->header, NVRAM_HEADER_LEN);
+	phead.length = cpu_to_be16(phead.length);
+
 	tmp_index = part->index;
-	rc = ppc_md.nvram_write((char *)&part->header, NVRAM_HEADER_LEN, &tmp_index); 
+	rc = ppc_md.nvram_write((char *)&phead, NVRAM_HEADER_LEN, &tmp_index);
 
 	return rc;
 }
@@ -505,6 +509,8 @@ int __init nvram_scan_partitions(void)
 
 		memcpy(&phead, header, NVRAM_HEADER_LEN);
 
+		phead.length = be16_to_cpu(phead.length);
+
 		err = 0;
 		c_sum = nvram_checksum(&phead);
 		if (c_sum != phead.checksum) {
-- 
cgit v1.2.3


From 711b5138d54fcfd5e312cea895d6e706a46eff19 Mon Sep 17 00:00:00 2001
From: Dan Streetman
Date: Tue, 29 Oct 2013 22:25:14 -0400
Subject: powerpc: Only save/restore SDR1 if in hypervisor mode

Currently, when not in hypervisor mode the kernel
Oopses during suspend or hibernation when accessing
the SDR1 register, because it is only available
in hypervisor mode.  Access to it needs to be
protected in BEGIN/END_FW_FTR_SECTION.

Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reported-by: Jimmy Pan <jipan@redhat.com>
Tested-by: Jimmy Pan <jipan@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/swsusp_asm64.S | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/swsusp_asm64.S b/arch/powerpc/kernel/swsusp_asm64.S
index 22045984835f..988f38dced0f 100644
--- a/arch/powerpc/kernel/swsusp_asm64.S
+++ b/arch/powerpc/kernel/swsusp_asm64.S
@@ -114,7 +114,9 @@ _GLOBAL(swsusp_arch_suspend)
 	SAVE_SPECIAL(MSR)
 	SAVE_SPECIAL(XER)
 #ifdef CONFIG_PPC_BOOK3S_64
+BEGIN_FW_FTR_SECTION
 	SAVE_SPECIAL(SDR1)
+END_FW_FTR_SECTION_IFCLR(FW_FEATURE_LPAR)
 #else
 	SAVE_SPR(TCR)
 
@@ -231,7 +233,9 @@ nothing_to_copy:
 	/* can't use RESTORE_SPECIAL(MSR) */
 	ld	r0, SL_MSR(r11)
 	mtmsrd	r0, 0
+BEGIN_FW_FTR_SECTION
 	RESTORE_SPECIAL(SDR1)
+END_FW_FTR_SECTION_IFCLR(FW_FEATURE_LPAR)
 #else
 	/* Restore SPRG1, be used to save paca */
 	ld	r0, SL_SPRG1(r11)
-- 
cgit v1.2.3


From 9c662cad2fb66ff3a44b1d4f545bf496bf67ab10 Mon Sep 17 00:00:00 2001
From: Philippe Bergheaud
Date: Tue, 24 Sep 2013 14:13:35 +0200
Subject: powerpc/bpf: BPF JIT compiler for 64-bit Little Endian

This enables the Berkeley Packet Filter JIT compiler
for the PowerPC running in 64bit Little Endian.

Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/ppc-opcode.h |  1 +
 arch/powerpc/net/bpf_jit.h            | 10 ++++++++++
 arch/powerpc/net/bpf_jit_64.S         |  9 ++++++++-
 arch/powerpc/net/bpf_jit_comp.c       | 17 ++---------------
 4 files changed, 21 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index 442edee4b6aa..99f87906de17 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -203,6 +203,7 @@
 /* Misc instructions for BPF compiler */
 #define PPC_INST_LD			0xe8000000
 #define PPC_INST_LHZ			0xa0000000
+#define PPC_INST_LHBRX			0x7c00062c
 #define PPC_INST_LWZ			0x80000000
 #define PPC_INST_STD			0xf8000000
 #define PPC_INST_STDU			0xf8000001
diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h
index 8a5dfaf5c6b7..0baf2b826e25 100644
--- a/arch/powerpc/net/bpf_jit.h
+++ b/arch/powerpc/net/bpf_jit.h
@@ -92,6 +92,8 @@ DECLARE_LOAD_FUNC(sk_load_byte_msh);
 				     ___PPC_RA(base) | IMM_L(i))
 #define PPC_LHZ(r, base, i)	EMIT(PPC_INST_LHZ | ___PPC_RT(r) |	      \
 				     ___PPC_RA(base) | IMM_L(i))
+#define PPC_LHBRX(r, base, b)	EMIT(PPC_INST_LHBRX | ___PPC_RT(r) |	      \
+				     ___PPC_RA(base) | ___PPC_RB(b))
 /* Convenience helpers for the above with 'far' offsets: */
 #define PPC_LD_OFFS(r, base, i) do { if ((i) < 32768) PPC_LD(r, base, i);     \
 		else {	PPC_ADDIS(r, base, IMM_HA(i));			      \
@@ -186,6 +188,14 @@ DECLARE_LOAD_FUNC(sk_load_byte_msh);
 				PPC_ORI(d, d, (uintptr_t)(i) & 0xffff);	      \
 		} } while (0);
 
+#define PPC_LHBRX_OFFS(r, base, i) \
+		do { PPC_LI32(r, i); PPC_LHBRX(r, r, base); } while(0)
+#ifdef __LITTLE_ENDIAN__
+#define PPC_NTOHS_OFFS(r, base, i)	PPC_LHBRX_OFFS(r, base, i)
+#else
+#define PPC_NTOHS_OFFS(r, base, i)	PPC_LHZ_OFFS(r, base, i)
+#endif
+
 static inline bool is_nearbranch(int offset)
 {
 	return (offset < 32768) && (offset >= -32768);
diff --git a/arch/powerpc/net/bpf_jit_64.S b/arch/powerpc/net/bpf_jit_64.S
index 7d3a3b5619a2..e76eba74d9da 100644
--- a/arch/powerpc/net/bpf_jit_64.S
+++ b/arch/powerpc/net/bpf_jit_64.S
@@ -43,8 +43,11 @@ sk_load_word_positive_offset:
 	cmpd	r_scratch1, r_addr
 	blt	bpf_slow_path_word
 	/* Nope, just hitting the header.  cr0 here is eq or gt! */
+#ifdef __LITTLE_ENDIAN__
+	lwbrx	r_A, r_D, r_addr
+#else
 	lwzx	r_A, r_D, r_addr
-	/* When big endian we don't need to byteswap. */
+#endif
 	blr	/* Return success, cr0 != LT */
 
 	.globl	sk_load_half
@@ -56,7 +59,11 @@ sk_load_half_positive_offset:
 	subi	r_scratch1, r_HL, 2
 	cmpd	r_scratch1, r_addr
 	blt	bpf_slow_path_half
+#ifdef __LITTLE_ENDIAN__
+	lhbrx	r_A, r_D, r_addr
+#else
 	lhzx	r_A, r_D, r_addr
+#endif
 	blr
 
 	.globl	sk_load_byte
diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c
index bf56e33f8257..81cd6c79babe 100644
--- a/arch/powerpc/net/bpf_jit_comp.c
+++ b/arch/powerpc/net/bpf_jit_comp.c
@@ -17,14 +17,8 @@
 
 #include "bpf_jit.h"
 
-#ifndef __BIG_ENDIAN
-/* There are endianness assumptions herein. */
-#error "Little-endian PPC not supported in BPF compiler"
-#endif
-
 int bpf_jit_enable __read_mostly;
 
-
 static inline void bpf_flush_icache(void *start, void *end)
 {
 	smp_wmb();
@@ -346,18 +340,11 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
 			break;
 
 			/*** Ancillary info loads ***/
-
-			/* None of the BPF_S_ANC* codes appear to be passed by
-			 * sk_chk_filter().  The interpreter and the x86 BPF
-			 * compiler implement them so we do too -- they may be
-			 * planted in future.
-			 */
 		case BPF_S_ANC_PROTOCOL: /* A = ntohs(skb->protocol); */
 			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
 						  protocol) != 2);
-			PPC_LHZ_OFFS(r_A, r_skb, offsetof(struct sk_buff,
-							  protocol));
-			/* ntohs is a NOP with BE loads. */
+			PPC_NTOHS_OFFS(r_A, r_skb, offsetof(struct sk_buff,
+							    protocol));
 			break;
 		case BPF_S_ANC_IFINDEX:
 			PPC_LD_OFFS(r_scratch1, r_skb, offsetof(struct sk_buff,
-- 
cgit v1.2.3


From d0cebfa650a084f041131207d81f9b311babd5ef Mon Sep 17 00:00:00 2001
From: Philippe Bergheaud
Date: Thu, 26 Sep 2013 08:30:09 +0200
Subject: powerpc: word-at-a-time optimization for 64-bit Little Endian

This is an optimization for the PowerPC in 64-bit
little-endian. Bit counting is used in find_zero(), instead
of the multiply and shift.

It is modelled after Alan Modra's PowerPC LE strlen patch
http://sourceware.org/ml/libc-alpha/2013-08/msg00097.html.

Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/word-at-a-time.h | 57 +++++++++++++++++--------------
 1 file changed, 32 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/word-at-a-time.h b/arch/powerpc/include/asm/word-at-a-time.h
index 213a5f2b0717..9a5c928bb3c6 100644
--- a/arch/powerpc/include/asm/word-at-a-time.h
+++ b/arch/powerpc/include/asm/word-at-a-time.h
@@ -42,13 +42,6 @@ static inline bool has_zero(unsigned long val, unsigned long *data, const struct
 
 #else
 
-/*
- * This is largely generic for little-endian machines, but the
- * optimal byte mask counting is probably going to be something
- * that is architecture-specific. If you have a reliably fast
- * bit count instruction, that might be better than the multiply
- * and shift, for example.
- */
 struct word_at_a_time {
 	const unsigned long one_bits, high_bits;
 };
@@ -57,19 +50,32 @@ struct word_at_a_time {
 
 #ifdef CONFIG_64BIT
 
-/*
- * Jan Achrenius on G+: microoptimized version of
- * the simpler "(mask & ONEBYTES) * ONEBYTES >> 56"
- * that works for the bytemasks without having to
- * mask them first.
- */
-static inline long count_masked_bytes(unsigned long mask)
+/* Alan Modra's little-endian strlen tail for 64-bit */
+#define create_zero_mask(mask) (mask)
+
+static inline unsigned long find_zero(unsigned long mask)
 {
-	return mask*0x0001020304050608ul >> 56;
+	unsigned long leading_zero_bits;
+	long trailing_zero_bit_mask;
+
+	asm ("addi %1,%2,-1\n\t"
+	     "andc %1,%1,%2\n\t"
+	     "popcntd %0,%1"
+	     : "=r" (leading_zero_bits), "=&r" (trailing_zero_bit_mask)
+	     : "r" (mask));
+	return leading_zero_bits >> 3;
 }
 
 #else	/* 32-bit case */
 
+/*
+ * This is largely generic for little-endian machines, but the
+ * optimal byte mask counting is probably going to be something
+ * that is architecture-specific. If you have a reliably fast
+ * bit count instruction, that might be better than the multiply
+ * and shift, for example.
+ */
+
 /* Carl Chatfield / Jan Achrenius G+ version for 32-bit */
 static inline long count_masked_bytes(long mask)
 {
@@ -79,6 +85,17 @@ static inline long count_masked_bytes(long mask)
 	return a & mask;
 }
 
+static inline unsigned long create_zero_mask(unsigned long bits)
+{
+	bits = (bits - 1) & ~bits;
+	return bits >> 7;
+}
+
+static inline unsigned long find_zero(unsigned long mask)
+{
+	return count_masked_bytes(mask);
+}
+
 #endif
 
 /* Return nonzero if it has a zero */
@@ -94,19 +111,9 @@ static inline unsigned long prep_zero_mask(unsigned long a, unsigned long bits,
 	return bits;
 }
 
-static inline unsigned long create_zero_mask(unsigned long bits)
-{
-	bits = (bits - 1) & ~bits;
-	return bits >> 7;
-}
-
 /* The mask we created is directly usable as a bytemask */
 #define zero_bytemask(mask) (mask)
 
-static inline unsigned long find_zero(unsigned long mask)
-{
-	return count_masked_bytes(mask);
-}
 #endif
 
 #endif /* _ASM_WORD_AT_A_TIME_H */
-- 
cgit v1.2.3


From 7ba5fef7d9e1880635cbb2fd698e8a24dc366d0f Mon Sep 17 00:00:00 2001
From: Michael Neuling
Date: Wed, 2 Oct 2013 17:15:14 +1000
Subject: powerpc/tm: Remove interrupt disable in __switch_to()

We currently turn IRQs off in __switch_to(0 but this is unnecessary as it's
already disabled in the caller.

This removes the IRQ disable but adds a check to make sure it is really off
in case this changes in future.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/process.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 4d42c4de8b9b..75c2d1009985 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -597,12 +597,13 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	struct task_struct *new)
 {
 	struct thread_struct *new_thread, *old_thread;
-	unsigned long flags;
 	struct task_struct *last;
 #ifdef CONFIG_PPC_BOOK3S_64
 	struct ppc64_tlb_batch *batch;
 #endif
 
+	WARN_ON(!irqs_disabled());
+
 	/* Back up the TAR across context switches.
 	 * Note that the TAR is not available for use in the kernel.  (To
 	 * provide this, the TAR should be backed up/restored on exception
@@ -722,8 +723,6 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	}
 #endif /* CONFIG_PPC_BOOK3S_64 */
 
-	local_irq_save(flags);
-
 	/*
 	 * We can't take a PMU exception inside _switch() since there is a
 	 * window where the kernel stack SLB and the kernel stack are out
@@ -743,8 +742,6 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	}
 #endif /* CONFIG_PPC_BOOK3S_64 */
 
-	local_irq_restore(flags);
-
 	return last;
 }
 
-- 
cgit v1.2.3


From afaf53985431bb295e4b723b08a55d0540cf8070 Mon Sep 17 00:00:00 2001
From: Sudeep KarkadaNagesha
Date: Wed, 18 Sep 2013 11:53:04 +0100
Subject: powerpc: Remove big endianness assumption in of_find_next_cache_node

Currently big endianness of the device tree data is assumed in
of_find_next_cache_node for 'handle' when calling of_find_node_by_phandle.

In preparation to move this function to common code, this patch fixes
the endianness using 'be32_to_cpup'

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/prom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index b7634ce41dbc..09be2759c314 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -778,7 +778,7 @@ struct device_node *of_find_next_cache_node(struct device_node *np)
 		handle = of_get_property(np, "next-level-cache", NULL);
 
 	if (handle)
-		return of_find_node_by_phandle(*handle);
+		return of_find_node_by_phandle(be32_to_cpup(handle));
 
 	/* OF on pmac has nodes instead of properties named "l2-cache"
 	 * beneath CPU nodes.
-- 
cgit v1.2.3


From a3e31b4588443f37d82195096c6b30dff1c152c2 Mon Sep 17 00:00:00 2001
From: Sudeep KarkadaNagesha
Date: Wed, 18 Sep 2013 11:53:05 +0100
Subject: of: Move definition of of_find_next_cache_node into common code.

Since the definition of_find_next_cache_node is architecture independent,
the existing definition in powerpc can be moved to driver/of/base.c

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/prom.h |  3 ---
 arch/powerpc/kernel/prom.c      | 31 -------------------------------
 drivers/of/base.c               | 31 +++++++++++++++++++++++++++++++
 include/linux/of.h              |  2 ++
 4 files changed, 33 insertions(+), 34 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index 7d0c7f3a7171..bf09e5a065b8 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -44,9 +44,6 @@ void of_parse_dma_window(struct device_node *dn, const __be32 *dma_window,
 
 extern void kdump_move_device_tree(void);
 
-/* cache lookup */
-struct device_node *of_find_next_cache_node(struct device_node *np);
-
 #ifdef CONFIG_NUMA
 extern int of_node_to_nid(struct device_node *device);
 #else
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 09be2759c314..4432fd86a6d2 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -760,37 +760,6 @@ void __init early_init_devtree(void *params)
  *
  *******/
 
-/**
- *	of_find_next_cache_node - Find a node's subsidiary cache
- *	@np:	node of type "cpu" or "cache"
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.  Caller should hold a reference
- *	to np.
- */
-struct device_node *of_find_next_cache_node(struct device_node *np)
-{
-	struct device_node *child;
-	const phandle *handle;
-
-	handle = of_get_property(np, "l2-cache", NULL);
-	if (!handle)
-		handle = of_get_property(np, "next-level-cache", NULL);
-
-	if (handle)
-		return of_find_node_by_phandle(be32_to_cpup(handle));
-
-	/* OF on pmac has nodes instead of properties named "l2-cache"
-	 * beneath CPU nodes.
-	 */
-	if (!strcmp(np->type, "cpu"))
-		for_each_child_of_node(np, child)
-			if (!strcmp(child->type, "cache"))
-				return child;
-
-	return NULL;
-}
-
 /**
  * of_get_ibm_chip_id - Returns the IBM "chip-id" of a device
  * @np: device node of the device
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 865d3f66c86b..b2cee3db5ceb 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1884,3 +1884,34 @@ int of_device_is_stdout_path(struct device_node *dn)
 	return of_stdout == dn;
 }
 EXPORT_SYMBOL_GPL(of_device_is_stdout_path);
+
+/**
+ *	of_find_next_cache_node - Find a node's subsidiary cache
+ *	@np:	node of type "cpu" or "cache"
+ *
+ *	Returns a node pointer with refcount incremented, use
+ *	of_node_put() on it when done.  Caller should hold a reference
+ *	to np.
+ */
+struct device_node *of_find_next_cache_node(const struct device_node *np)
+{
+	struct device_node *child;
+	const phandle *handle;
+
+	handle = of_get_property(np, "l2-cache", NULL);
+	if (!handle)
+		handle = of_get_property(np, "next-level-cache", NULL);
+
+	if (handle)
+		return of_find_node_by_phandle(be32_to_cpup(handle));
+
+	/* OF on pmac has nodes instead of properties named "l2-cache"
+	 * beneath CPU nodes.
+	 */
+	if (!strcmp(np->type, "cpu"))
+		for_each_child_of_node(np, child)
+			if (!strcmp(child->type, "cache"))
+				return child;
+
+	return NULL;
+}
diff --git a/include/linux/of.h b/include/linux/of.h
index f95aee391e30..c08c07e249b3 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -226,6 +226,8 @@ static inline int of_get_child_count(const struct device_node *np)
 	return num;
 }
 
+/* cache lookup */
+extern struct device_node *of_find_next_cache_node(const struct device_node *);
 extern struct device_node *of_find_node_with_property(
 	struct device_node *from, const char *prop_name);
 #define for_each_node_with_property(dn, prop_name) \
-- 
cgit v1.2.3


From a40a2b670706494610d794927b9aebe77e18af8d Mon Sep 17 00:00:00 2001
From: Vladimir Murzin
Date: Sat, 28 Sep 2013 10:22:00 +0200
Subject: powerpc/bpf: Fix DIVWU instruction opcode

Currently DIVWU stands for *signed* divw opcode:

7d 2a 4b 96 	divwu   r9,r10,r9
7d 2a 4b d6 	divw    r9,r10,r9

Use the *unsigned* divw opcode for DIVWU.

Suggested-by: Vassili Karpov <av1474@comtv.ru>
Reviewed-by: Vassili Karpov <av1474@comtv.ru>
Signed-off-by: Vladimir Murzin <murzin.v@gmail.com>
Acked-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/ppc-opcode.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index 99f87906de17..3132bb9365f3 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -222,7 +222,7 @@
 #define PPC_INST_MULLW			0x7c0001d6
 #define PPC_INST_MULHWU			0x7c000016
 #define PPC_INST_MULLI			0x1c000000
-#define PPC_INST_DIVWU			0x7c0003d6
+#define PPC_INST_DIVWU			0x7c000396
 #define PPC_INST_RLWINM			0x54000000
 #define PPC_INST_RLDICR			0x78000004
 #define PPC_INST_SLW			0x7c000030
-- 
cgit v1.2.3


From b0c06d333505c5503d0de5dee1ddf8478dcf5251 Mon Sep 17 00:00:00 2001
From: Vladimir Murzin
Date: Sat, 28 Sep 2013 10:22:01 +0200
Subject: powerpc/bpf: Support MOD operation

commit b6069a9570 (filter: add MOD operation) added generic
support for modulus operation in BPF.

This patch brings JIT support for PPC64

Signed-off-by: Vladimir Murzin <murzin.v@gmail.com>
Acked-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/net/bpf_jit.h      |  1 +
 arch/powerpc/net/bpf_jit_comp.c | 20 ++++++++++++++++++++
 2 files changed, 21 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h
index 0baf2b826e25..9aee27c582dc 100644
--- a/arch/powerpc/net/bpf_jit.h
+++ b/arch/powerpc/net/bpf_jit.h
@@ -39,6 +39,7 @@
 #define r_X		5
 #define r_addr		6
 #define r_scratch1	7
+#define r_scratch2	8
 #define r_D		14
 #define r_HL		15
 #define r_M		16
diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c
index 81cd6c79babe..475d4f26fc6e 100644
--- a/arch/powerpc/net/bpf_jit_comp.c
+++ b/arch/powerpc/net/bpf_jit_comp.c
@@ -187,6 +187,26 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
 				PPC_MUL(r_A, r_A, r_scratch1);
 			}
 			break;
+		case BPF_S_ALU_MOD_X: /* A %= X; */
+			ctx->seen |= SEEN_XREG;
+			PPC_CMPWI(r_X, 0);
+			if (ctx->pc_ret0 != -1) {
+				PPC_BCC(COND_EQ, addrs[ctx->pc_ret0]);
+			} else {
+				PPC_BCC_SHORT(COND_NE, (ctx->idx*4)+12);
+				PPC_LI(r_ret, 0);
+				PPC_JMP(exit_addr);
+			}
+			PPC_DIVWU(r_scratch1, r_A, r_X);
+			PPC_MUL(r_scratch1, r_X, r_scratch1);
+			PPC_SUB(r_A, r_A, r_scratch1);
+			break;
+		case BPF_S_ALU_MOD_K: /* A %= K; */
+			PPC_LI32(r_scratch2, K);
+			PPC_DIVWU(r_scratch1, r_A, r_scratch2);
+			PPC_MUL(r_scratch1, r_scratch2, r_scratch1);
+			PPC_SUB(r_A, r_A, r_scratch1);
+			break;
 		case BPF_S_ALU_DIV_X: /* A /= X; */
 			ctx->seen |= SEEN_XREG;
 			PPC_CMPWI(r_X, 0);
-- 
cgit v1.2.3


From 78119fd1068cc068f6112a57a5f6de0e5b20245a Mon Sep 17 00:00:00 2001
From: Grant Likely
Date: Fri, 1 Nov 2013 10:50:50 -0700
Subject: of/irq: Fix bug in interrupt parsing refactor.

Commit 2361613206e6, "of/irq: Refactor interrupt-map parsing" introduced
a bug. The irq parsing will fail for some nodes that don't have a reg
property. It is fixed by deferring the check for reg until it is
actually needed. Also adjust the testcase data to catch the bug.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Cc: Rob Herring <rob.herring@calxeda.com>
---
 arch/arm/boot/dts/testcases/tests-interrupts.dtsi |  7 ++++---
 drivers/of/irq.c                                  | 20 ++++++++++----------
 2 files changed, 14 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/testcases/tests-interrupts.dtsi b/arch/arm/boot/dts/testcases/tests-interrupts.dtsi
index 560d6bf680b6..c843720bd3e5 100644
--- a/arch/arm/boot/dts/testcases/tests-interrupts.dtsi
+++ b/arch/arm/boot/dts/testcases/tests-interrupts.dtsi
@@ -2,7 +2,8 @@
 / {
 	testcase-data {
 		interrupts {
-			#address-cells = <0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			test_intc0: intc0 {
 				interrupt-controller;
 				#interrupt-cells = <1>;
@@ -29,8 +30,7 @@
 
 			test_intmap1: intmap1 {
 				#interrupt-cells = <2>;
-				#address-cells = <0>;
-				interrupt-map = <1 2 &test_intc0 15>;
+				interrupt-map = <0x5000 1 2 &test_intc0 15>;
 			};
 
 			interrupts0 {
@@ -44,6 +44,7 @@
 			};
 
 			interrupts-extended0 {
+				reg = <0x5000 0x100>;
 				interrupts-extended = <&test_intc0 1>,
 						      <&test_intc1 2 3 4>,
 						      <&test_intc2 5 6>,
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 8cc62b4a7988..52dba6a01423 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -147,18 +147,9 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 
 	pr_debug(" -> addrsize=%d\n", addrsize);
 
-	/* If we were passed no "reg" property and we attempt to parse
-	 * an interrupt-map, then #address-cells must be 0.
-	 * Fail if it's not.
-	 */
-	if (addr == NULL && addrsize != 0) {
-		pr_debug(" -> no reg passed in when needed !\n");
-		return -EINVAL;
-	}
-
 	/* Precalculate the match array - this simplifies match loop */
 	for (i = 0; i < addrsize; i++)
-		initial_match_array[i] = addr[i];
+		initial_match_array[i] = addr ? addr[i] : 0;
 	for (i = 0; i < intsize; i++)
 		initial_match_array[addrsize + i] = cpu_to_be32(out_irq->args[i]);
 
@@ -174,6 +165,15 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 			return 0;
 		}
 
+		/*
+		 * interrupt-map parsing does not work without a reg
+		 * property when #address-cells != 0
+		 */
+		if (addrsize && !addr) {
+			pr_debug(" -> no reg passed in when needed !\n");
+			goto fail;
+		}
+
 		/* Now look for an interrupt-map */
 		imap = of_get_property(ipar, "interrupt-map", &imaplen);
 		/* No interrupt map, check for an interrupt parent */
-- 
cgit v1.2.3


From 44790a0b93d8481a8dc5bf6aa600941627b56d56 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Tue, 5 Nov 2013 10:09:11 +1100
Subject: powerpc/boot: Properly handle the base "of" boot wrapper

The wrapper script needs an explicit rule for the "of" boot
wrapper (generic wrapper, similar to pseries). Before
0c9fa29149d3726e14262aeb0c8461a948cc9d56 it was hanlded
implicitly by the statement:

platformo=$object/"$platform".o

But now that epapr.o needs to be added, that doesn't work
and an explicit rule must be added.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/wrapper | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index ac16e9984ecb..2e1af74a64be 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -147,6 +147,10 @@ link_address='0x400000'
 make_space=y
 
 case "$platform" in
+of)
+    platformo="$object/of.o $object/epapr.o"
+    make_space=n
+    ;;
 pseries)
     platformo="$object/of.o $object/epapr.o"
     link_address='0x4000000'
-- 
cgit v1.2.3


From 7f71be4c9f9a334e7bd0adc66225db4eb88c3bc4 Mon Sep 17 00:00:00 2001
From: Chen Gang
Date: Tue, 5 Nov 2013 09:46:39 +0800
Subject: x86, defconfig: Add DEVTMPFS and DEVTMPFS_MOUNT to *86*_defconfig

The defconfig kernel can not run under neither fedora16 x86_64 laptop
nor fedora17 x86_64 pc. After enable DEVTMPFS* in x86_64_defconfig, it
will be OK.

DEVTMPFS* is only related with software, so for i386_defconfig may also
need them (at least, it has no negative effect for defconfig).

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Link: http://lkml.kernel.org/r/52784DFF.8040004@asianux.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/configs/i386_defconfig   | 2 ++
 arch/x86/configs/x86_64_defconfig | 2 ++
 2 files changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 94447086e551..a7fef2621cc9 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -142,6 +142,8 @@ CONFIG_MAC80211=y
 CONFIG_MAC80211_LEDS=y
 CONFIG_RFKILL=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_DEBUG_DEVRES=y
 CONFIG_CONNECTOR=y
 CONFIG_BLK_DEV_LOOP=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 671524d0f6c0..c1119d4c1281 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -141,6 +141,8 @@ CONFIG_MAC80211=y
 CONFIG_MAC80211_LEDS=y
 CONFIG_RFKILL=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_DEBUG_DEVRES=y
 CONFIG_CONNECTOR=y
 CONFIG_BLK_DEV_LOOP=y
-- 
cgit v1.2.3


From d7a88c7eb46acb486922822eec3224c0bcab29dc Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Thu, 10 Oct 2013 19:18:02 +1100
Subject: powerpc/scom: Enable 64-bit addresses

On P8, XSCOM addresses has a special "indirect" form that
requires more than 32-bits, so let's use u64 everywhere in
the code instead of u32.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/scom.h             | 8 ++++----
 arch/powerpc/platforms/powernv/opal-xscom.c | 6 +++---
 arch/powerpc/platforms/wsp/scom_wsp.c       | 4 ++--
 3 files changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/scom.h b/arch/powerpc/include/asm/scom.h
index 07dcdcfdaefc..f5cde45b1161 100644
--- a/arch/powerpc/include/asm/scom.h
+++ b/arch/powerpc/include/asm/scom.h
@@ -54,8 +54,8 @@ struct scom_controller {
 	scom_map_t (*map)(struct device_node *ctrl_dev, u64 reg, u64 count);
 	void (*unmap)(scom_map_t map);
 
-	int (*read)(scom_map_t map, u32 reg, u64 *value);
-	int (*write)(scom_map_t map, u32 reg, u64 value);
+	int (*read)(scom_map_t map, u64 reg, u64 *value);
+	int (*write)(scom_map_t map, u64 reg, u64 value);
 };
 
 extern const struct scom_controller *scom_controller;
@@ -137,7 +137,7 @@ static inline void scom_unmap(scom_map_t map)
  *
  * Returns 0 (success) or a negative error code
  */
-static inline int scom_read(scom_map_t map, u32 reg, u64 *value)
+static inline int scom_read(scom_map_t map, u64 reg, u64 *value)
 {
 	int rc;
 
@@ -155,7 +155,7 @@ static inline int scom_read(scom_map_t map, u32 reg, u64 *value)
  *
  * Returns 0 (success) or a negative error code
  */
-static inline int scom_write(scom_map_t map, u32 reg, u64 value)
+static inline int scom_write(scom_map_t map, u64 reg, u64 value)
 {
 	return scom_controller->write(map, reg, value);
 }
diff --git a/arch/powerpc/platforms/powernv/opal-xscom.c b/arch/powerpc/platforms/powernv/opal-xscom.c
index 3ed5c6498324..09a90d8897ba 100644
--- a/arch/powerpc/platforms/powernv/opal-xscom.c
+++ b/arch/powerpc/platforms/powernv/opal-xscom.c
@@ -27,7 +27,7 @@
  */
 struct opal_scom_map {
 	uint32_t chip;
-	uint32_t addr;
+	uint64_t addr;
 };
 
 static scom_map_t opal_scom_map(struct device_node *dev, u64 reg, u64 count)
@@ -71,7 +71,7 @@ static int opal_xscom_err_xlate(int64_t rc)
 	}
 }
 
-static int opal_scom_read(scom_map_t map, u32 reg, u64 *value)
+static int opal_scom_read(scom_map_t map, u64 reg, u64 *value)
 {
 	struct opal_scom_map *m = map;
 	int64_t rc;
@@ -80,7 +80,7 @@ static int opal_scom_read(scom_map_t map, u32 reg, u64 *value)
 	return opal_xscom_err_xlate(rc);
 }
 
-static int opal_scom_write(scom_map_t map, u32 reg, u64 value)
+static int opal_scom_write(scom_map_t map, u64 reg, u64 value)
 {
 	struct opal_scom_map *m = map;
 	int64_t rc;
diff --git a/arch/powerpc/platforms/wsp/scom_wsp.c b/arch/powerpc/platforms/wsp/scom_wsp.c
index 54172c4a8a64..8928507affea 100644
--- a/arch/powerpc/platforms/wsp/scom_wsp.c
+++ b/arch/powerpc/platforms/wsp/scom_wsp.c
@@ -50,7 +50,7 @@ static void wsp_scom_unmap(scom_map_t map)
 	iounmap((void *)map);
 }
 
-static int wsp_scom_read(scom_map_t map, u32 reg, u64 *value)
+static int wsp_scom_read(scom_map_t map, u64 reg, u64 *value)
 {
 	u64 __iomem *addr = (u64 __iomem *)map;
 
@@ -59,7 +59,7 @@ static int wsp_scom_read(scom_map_t map, u32 reg, u64 *value)
 	return 0;
 }
 
-static int wsp_scom_write(scom_map_t map, u32 reg, u64 value)
+static int wsp_scom_write(scom_map_t map, u64 reg, u64 value)
 {
 	u64 __iomem *addr = (u64 __iomem *)map;
 
-- 
cgit v1.2.3


From cda13552d5055a87dd39334dabf47249b01fc5aa Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Mon, 4 Nov 2013 13:20:35 +1100
Subject: powerpc/scom: Improve debugfs interface

The current debugfs interface to scom is essentially unused
and racy. It uses two different files "address" and "data"
to perform accesses which is at best impractical for anything
but manual use by a developer.

This replaces it with an "access" file which represent the entire
scom address space which can be lseek/read/writen too.

This file only supports accesses that are 8 bytes aligned and
multiple of 8 bytes in size. The offset is logically the SCOM
address multiplied by 8.

Since nothing in userspace exploits that file at the moment, the ABI
change is a no-brainer.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/scom.c | 136 +++++++++++++++++++++++++++------------------
 1 file changed, 81 insertions(+), 55 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/sysdev/scom.c
index 3963d995648a..6f5a8d177c42 100644
--- a/arch/powerpc/sysdev/scom.c
+++ b/arch/powerpc/sysdev/scom.c
@@ -25,6 +25,7 @@
 #include <asm/debug.h>
 #include <asm/prom.h>
 #include <asm/scom.h>
+#include <asm/uaccess.h>
 
 const struct scom_controller *scom_controller;
 EXPORT_SYMBOL_GPL(scom_controller);
@@ -98,61 +99,89 @@ EXPORT_SYMBOL_GPL(scom_map_device);
 #ifdef CONFIG_SCOM_DEBUGFS
 struct scom_debug_entry {
 	struct device_node *dn;
-	unsigned long addr;
-	scom_map_t map;
-	spinlock_t lock;
-	char name[8];
-	struct debugfs_blob_wrapper blob;
+	struct debugfs_blob_wrapper path;
+	char name[16];
 };
 
-static int scom_addr_set(void *data, u64 val)
-{
-	struct scom_debug_entry *ent = data;
-
-	ent->addr = 0;
-	scom_unmap(ent->map);
-
-	ent->map = scom_map(ent->dn, val, 1);
-	if (scom_map_ok(ent->map))
-		ent->addr = val;
-	else
-		return -EFAULT;
-
-	return 0;
-}
-
-static int scom_addr_get(void *data, u64 *val)
+static ssize_t scom_debug_read(struct file *filp, char __user *ubuf,
+			       size_t count, loff_t *ppos)
 {
-	struct scom_debug_entry *ent = data;
-	*val = ent->addr;
-	return 0;
+	struct scom_debug_entry *ent = filp->private_data;
+	u64 __user *ubuf64 = (u64 __user *)ubuf;
+	loff_t off = *ppos;
+	ssize_t done = 0; 
+	u64 reg, reg_cnt, val;
+	scom_map_t map;
+	int rc;
+
+	if (off < 0 || (off & 7) || (count & 7))
+		return -EINVAL;
+	reg = off >> 3;
+	reg_cnt = count >> 3;
+
+	map = scom_map(ent->dn, reg, reg_cnt);
+	if (!scom_map_ok(map))
+		return -ENXIO;
+
+	for (reg = 0; reg < reg_cnt; reg++) {
+		rc = scom_read(map, reg, &val);
+		if (!rc)
+			rc = put_user(val, ubuf64);
+		if (rc) {
+			if (!done)
+				done = rc;
+			break;
+		}
+		ubuf64++;
+		*ppos += 8;
+		done += 8;
+	}
+	scom_unmap(map);
+	return done;
 }
-DEFINE_SIMPLE_ATTRIBUTE(scom_addr_fops, scom_addr_get, scom_addr_set,
-			"0x%llx\n");
 
-static int scom_val_set(void *data, u64 val)
+static ssize_t scom_debug_write(struct file* filp, const char __user *ubuf,
+				size_t count, loff_t *ppos)
 {
-	struct scom_debug_entry *ent = data;
-
-	if (!scom_map_ok(ent->map))
-		return -EFAULT;
-
-	scom_write(ent->map, 0, val);
-
-	return 0;
+	struct scom_debug_entry *ent = filp->private_data;
+	u64 __user *ubuf64 = (u64 __user *)ubuf;
+	loff_t off = *ppos;
+	ssize_t done = 0; 
+	u64 reg, reg_cnt, val;
+	scom_map_t map;
+	int rc;
+
+	if (off < 0 || (off & 7) || (count & 7))
+		return -EINVAL;
+	reg = off >> 3;
+	reg_cnt = count >> 3;
+
+	map = scom_map(ent->dn, reg, reg_cnt);
+	if (!scom_map_ok(map))
+		return -ENXIO;
+
+	for (reg = 0; reg < reg_cnt; reg++) {
+		rc = get_user(val, ubuf64);
+		if (!rc)
+			rc = scom_write(map, reg,  val);
+		if (rc) {
+			if (!done)
+				done = rc;
+			break;
+		}
+		ubuf64++;
+		done += 8;
+	}
+	scom_unmap(map);
+	return done;
 }
 
-static int scom_val_get(void *data, u64 *val)
-{
-	struct scom_debug_entry *ent = data;
-
-	if (!scom_map_ok(ent->map))
-		return -EFAULT;
-
-	return scom_read(ent->map, 0, val);
-}
-DEFINE_SIMPLE_ATTRIBUTE(scom_val_fops, scom_val_get, scom_val_set,
-			"0x%llx\n");
+static const struct file_operations scom_debug_fops = {
+	.read =		scom_debug_read,
+	.write =	scom_debug_write,
+	.open =		simple_open,
+	.llseek =	default_llseek,
+};
 
 static int scom_debug_init_one(struct dentry *root, struct device_node *dn,
 			       int i)
@@ -165,11 +194,9 @@ static int scom_debug_init_one(struct dentry *root, struct device_node *dn,
 		return -ENOMEM;
 
 	ent->dn = of_node_get(dn);
-	ent->map = SCOM_MAP_INVALID;
-	spin_lock_init(&ent->lock);
-	snprintf(ent->name, 8, "scom%d", i);
-	ent->blob.data = (void*) dn->full_name;
-	ent->blob.size = strlen(dn->full_name);
+	snprintf(ent->name, 16, "%08x", i);
+	ent->path.data = (void*) dn->full_name;
+	ent->path.size = strlen(dn->full_name);
 
 	dir = debugfs_create_dir(ent->name, root);
 	if (!dir) {
@@ -178,9 +205,8 @@ static int scom_debug_init_one(struct dentry *root, struct device_node *dn,
 		return -1;
 	}
 
-	debugfs_create_file("addr", 0600, dir, ent, &scom_addr_fops);
-	debugfs_create_file("value", 0600, dir, ent, &scom_val_fops);
-	debugfs_create_blob("devspec", 0400, dir, &ent->blob);
+	debugfs_create_blob("devspec", 0400, dir, &ent->path);
+	debugfs_create_file("access", 0600, dir, ent, &scom_debug_fops);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 80546ac51396bd1d2e37cc78c7bed44c08f90352 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Thu, 10 Oct 2013 19:19:15 +1100
Subject: powerpc/powernv: Add support for indirect XSCOM via debugfs

Indirect XSCOM addresses normally have the top bit set (of the 64-bit
address). This doesn't work via the normal debugfs interface, so we use
a different encoding, which we need to convert before calling OPAL.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powernv/opal-xscom.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/opal-xscom.c b/arch/powerpc/platforms/powernv/opal-xscom.c
index 09a90d8897ba..4d99a8fd55ac 100644
--- a/arch/powerpc/platforms/powernv/opal-xscom.c
+++ b/arch/powerpc/platforms/powernv/opal-xscom.c
@@ -71,11 +71,33 @@ static int opal_xscom_err_xlate(int64_t rc)
 	}
 }
 
+static u64 opal_scom_unmangle(u64 reg)
+{
+	/*
+	 * XSCOM indirect addresses have the top bit set. Additionally
+	 * the reset of the top 3 nibbles is always 0.
+	 *
+	 * Because the debugfs interface uses signed offsets and shifts
+	 * the address left by 3, we basically cannot use the top 4 bits
+	 * of the 64-bit address, and thus cannot use the indirect bit.
+	 *
+	 * To deal with that, we support the indirect bit being in bit
+	 * 4 (IBM notation) instead of bit 0 in this API, we do the
+	 * conversion here. To leave room for further xscom address
+	 * expansion, we only clear out the top byte
+	 *
+	 */
+	if (reg & (1ull << 59))
+		reg = (reg & ~(0xffull << 56)) | (1ull << 63);
+	return reg;
+}
+
 static int opal_scom_read(scom_map_t map, u64 reg, u64 *value)
 {
 	struct opal_scom_map *m = map;
 	int64_t rc;
 
+	reg = opal_scom_unmangle(reg);
 	rc = opal_xscom_read(m->chip, m->addr + reg, (uint64_t *)__pa(value));
 	return opal_xscom_err_xlate(rc);
 }
@@ -85,6 +107,7 @@ static int opal_scom_write(scom_map_t map, u64 reg, u64 value)
 	struct opal_scom_map *m = map;
 	int64_t rc;
 
+	reg = opal_scom_unmangle(reg);
 	rc = opal_xscom_write(m->chip, m->addr + reg, value);
 	return opal_xscom_err_xlate(rc);
 }
-- 
cgit v1.2.3


From 631ad691b5818291d89af9be607d2fe40be0886e Mon Sep 17 00:00:00 2001
From: Gavin Shan
Date: Mon, 4 Nov 2013 16:32:46 +0800
Subject: powerpc/powernv: Add PE to its own PELTV

We need add PE to its own PELTV. Otherwise, the errors originated
from the PE might contribute to other PEs. In the result, we can't
clear up the error successfully even we're checking and clearing
errors during access to PCI config space.

Cc: stable@vger.kernel.org
Reported-by: kalshett@in.ibm.com
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index c639af7d4826..198566e1da71 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -163,13 +163,23 @@ static int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
 		rid_end = pe->rid + 1;
 	}
 
-	/* Associate PE in PELT */
+	/*
+	 * Associate PE in PELT. We need add the PE into the
+	 * corresponding PELT-V as well. Otherwise, the error
+	 * originated from the PE might contribute to other
+	 * PEs.
+	 */
 	rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid,
 			     bcomp, dcomp, fcomp, OPAL_MAP_PE);
 	if (rc) {
 		pe_err(pe, "OPAL error %ld trying to setup PELT table\n", rc);
 		return -ENXIO;
 	}
+
+	rc = opal_pci_set_peltv(phb->opal_id, pe->pe_number,
+				pe->pe_number, OPAL_ADD_PE_TO_DOMAIN);
+	if (rc)
+		pe_warn(pe, "OPAL error %d adding self to PELTV\n", rc);
 	opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number,
 				  OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
 
-- 
cgit v1.2.3


From 36954dc78d8a1dcd4780cf4bd0fc6292791821b9 Mon Sep 17 00:00:00 2001
From: Gavin Shan
Date: Mon, 4 Nov 2013 16:32:47 +0800
Subject: powerpc/powernv: Reserve the correct PE number

We're assigning PE numbers after the completion of PCI probe. During
the PCI probe, we had PE#0 as the super container to encompass all
PCI devices. However, that's inappropriate since PELTM has ascending
order of priority on search on P7IOC. So we need PE#127 takes the
role that PE#0 has previously. For PHB3, we still have PE#0 as the
reserved PE.

The patch supposes that the underly firmware has built the RID to
PE# mapping after resetting IODA tables: all PELTM entries except
last one has invalid mapping on P7IOC, but all RTEs have binding
to PE#0. The reserved PE# is being exported by firmware by device
tree.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 22 +++++++++-------------
 arch/powerpc/platforms/powernv/pci.c      | 10 +++++++---
 arch/powerpc/platforms/powernv/pci.h      |  1 +
 3 files changed, 17 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 198566e1da71..084cdfa40682 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1209,12 +1209,13 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
 		pr_err("  Failed to map registers !\n");
 
 	/* Initialize more IODA stuff */
+	phb->ioda.total_pe = 1;
 	prop32 = of_get_property(np, "ibm,opal-num-pes", NULL);
-	if (!prop32)
-		phb->ioda.total_pe = 1;
-	else
+	if (prop32)
 		phb->ioda.total_pe = be32_to_cpup(prop32);
-
+	prop32 = of_get_property(np, "ibm,opal-reserved-pe", NULL);
+	if (prop32)
+		phb->ioda.reserved_pe = be32_to_cpup(prop32);
 	phb->ioda.m32_size = resource_size(&hose->mem_resources[0]);
 	/* FW Has already off top 64k of M32 space (MSI space) */
 	phb->ioda.m32_size += 0x10000;
@@ -1243,7 +1244,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	if (phb->type == PNV_PHB_IODA1)
 		phb->ioda.io_segmap = aux + iomap_off;
 	phb->ioda.pe_array = aux + pemap_off;
-	set_bit(0, phb->ioda.pe_alloc);
+	set_bit(phb->ioda.reserved_pe, phb->ioda.pe_alloc);
 
 	INIT_LIST_HEAD(&phb->ioda.pe_dma_list);
 	INIT_LIST_HEAD(&phb->ioda.pe_list);
@@ -1268,8 +1269,10 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
 					 segment_size);
 #endif
 
-	pr_info("  %d PE's M32: 0x%x [segment=0x%x] IO: 0x%x [segment=0x%x]\n",
+	pr_info("  %d (%d) PE's M32: 0x%x [segment=0x%x]"
+		" IO: 0x%x [segment=0x%x]\n",
 		phb->ioda.total_pe,
+		phb->ioda.reserved_pe,
 		phb->ioda.m32_size, phb->ioda.m32_segsize,
 		phb->ioda.io_size, phb->ioda.io_segsize);
 
@@ -1306,13 +1309,6 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET, OPAL_ASSERT_RESET);
 	if (rc)
 		pr_warning("  OPAL Error %ld performing IODA table reset !\n", rc);
-
-	/*
-	 * On IODA1 map everything to PE#0, on IODA2 we assume the IODA reset
-	 * has cleared the RTT which has the same effect
-	 */
-	if (ioda_type == PNV_PHB_IODA1)
-		opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE);
 }
 
 void __init pnv_pci_init_ioda2_phb(struct device_node *np)
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 921ae673baf3..4eb33a9ed532 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -242,11 +242,15 @@ static void pnv_pci_config_check_eeh(struct pnv_phb *phb,
 	/*
 	 * Get the PE#. During the PCI probe stage, we might not
 	 * setup that yet. So all ER errors should be mapped to
-	 * PE#0
+	 * reserved PE.
 	 */
 	pe_no = PCI_DN(dn)->pe_number;
-	if (pe_no == IODA_INVALID_PE)
-		pe_no = 0;
+	if (pe_no == IODA_INVALID_PE) {
+		if (phb->type == PNV_PHB_P5IOC2)
+			pe_no = 0;
+		else
+			pe_no = phb->ioda.reserved_pe;
+	}
 
 	/* Read freeze status */
 	rc = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, &fstate, &pcierr,
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 64d3b12e5b6d..911c24ef033e 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -125,6 +125,7 @@ struct pnv_phb {
 		struct {
 			/* Global bridge info */
 			unsigned int		total_pe;
+			unsigned int		reserved_pe;
 			unsigned int		m32_size;
 			unsigned int		m32_segsize;
 			unsigned int		m32_pci_base;
-- 
cgit v1.2.3


From 0c4888ef1d8a8b82c29075ce7e257ff795af15c7 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt
Date: Tue, 5 Nov 2013 16:33:22 +1100
Subject: powerpc: Fix fatal SLB miss when restoring PPR

When restoring the PPR value, we incorrectly access the thread structure
at a time where MSR:RI is clear, which means we cannot recover from nested
faults. However the thread structure isn't covered by the "bolted" SLB
entries and thus accessing can fault.

This fixes it by splitting the code so that the PPR value is loaded into
a GPR before MSR:RI is cleared.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/ppc_asm.h |  7 -------
 arch/powerpc/kernel/entry_64.S     | 10 +++++++++-
 2 files changed, 9 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 8deaaad3b32f..3c1acc31a092 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -406,13 +406,6 @@ BEGIN_FTR_SECTION_NESTED(945)						\
 	std	ra,TASKTHREADPPR(rb);					\
 END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,945)
 
-#define RESTORE_PPR(ra, rb)						\
-BEGIN_FTR_SECTION_NESTED(946)						\
-	ld	ra,PACACURRENT(r13);					\
-	ld	rb,TASKTHREADPPR(ra);					\
-	mtspr	SPRN_PPR,rb;	/* Restore PPR */			\
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,946)
-
 #endif
 
 /*
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 12679cd43e0c..bbfb0294b354 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -818,6 +818,12 @@ fast_exception_return:
 	andi.	r0,r3,MSR_RI
 	beq-	unrecov_restore
 
+	/* Load PPR from thread struct before we clear MSR:RI */
+BEGIN_FTR_SECTION
+	ld	r2,PACACURRENT(r13)
+	ld	r2,TASKTHREADPPR(r2)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+
 	/*
 	 * Clear RI before restoring r13.  If we are returning to
 	 * userspace and we take an exception after restoring r13,
@@ -838,8 +844,10 @@ fast_exception_return:
 	 */
 	andi.	r0,r3,MSR_PR
 	beq	1f
+BEGIN_FTR_SECTION
+	mtspr	SPRN_PPR,r2	/* Restore PPR */
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	ACCOUNT_CPU_USER_EXIT(r2, r4)
-	RESTORE_PPR(r2, r4)
 	REST_GPR(13, r1)
 1:
 	mtspr	SPRN_SRR1,r3
-- 
cgit v1.2.3


From a477c8594bee3bff639739c48258a8c737ab721e Mon Sep 17 00:00:00 2001
From: HATAYAMA Daisuke
Date: Tue, 5 Nov 2013 02:15:48 +0900
Subject: x86/cpu: Always print SMP information in /proc/cpuinfo

Currently show_cpuinfo_core() displays cpu core information only if
the number of threads per a whole cores is 2 or larger.

However, this condition doesn't care about the number of
sockets. For example, this condition doesn't hold on systems
with two logical cpus consisting of two sockets and a single
core on each socket - yet the topology information would be
interesting to see in that case as well.

I don't know whether or not there are processors in real world
by which such configurations are possible, but at least on
vitual machine environments, such configuration can occur,
typically when no explicit SMP information is provided in
advance.

For example, on qemu/KVM, SMP information is specified via -smp
command-line option, more specifically, its syntax is:

  -smp n[,cores=cores][,threads=threads][,sockets=sockets][,maxcpus=maxcpus]

If this is not specified, qemu tells configuration with
n-sockets, 1-core and 1-thread to the guest machine, on which
guest, MP information is not displayed in /proc/cpuinfo.

I saw this situation on VMWare guest environment, too.

To fix this issue, this patch simply removes the condition
because this information is useful even if there's only 1
thread.

Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/5277D644.4090707@jp.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/cpu/proc.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index aee6317b902f..06fe3ed8b851 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -11,15 +11,12 @@ static void show_cpuinfo_core(struct seq_file *m, struct cpuinfo_x86 *c,
 			      unsigned int cpu)
 {
 #ifdef CONFIG_SMP
-	if (c->x86_max_cores * smp_num_siblings > 1) {
-		seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
-		seq_printf(m, "siblings\t: %d\n",
-			   cpumask_weight(cpu_core_mask(cpu)));
-		seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
-		seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
-		seq_printf(m, "apicid\t\t: %d\n", c->apicid);
-		seq_printf(m, "initial apicid\t: %d\n", c->initial_apicid);
-	}
+	seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
+	seq_printf(m, "siblings\t: %d\n", cpumask_weight(cpu_core_mask(cpu)));
+	seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
+	seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
+	seq_printf(m, "apicid\t\t: %d\n", c->apicid);
+	seq_printf(m, "initial apicid\t: %d\n", c->initial_apicid);
 #endif
 }
 
-- 
cgit v1.2.3


From bb61ccc7dbcbc1ed4600bef5610d99ec91fd7032 Mon Sep 17 00:00:00 2001
From: Josh Boyer
Date: Tue, 5 Nov 2013 09:37:29 -0500
Subject: x86/cpu: Allow higher NR_CPUS values

The current range for SMP configs is 2 - 512 CPUs, or a full
4096 in the case of MAXSMP.  There are machines that have 1024
CPUs in them today and configuring a kernel for that means you
are forced to set MAXSMP.  This adds additional unnecessary
overhead.  While that overhead might be considered tiny for
large machines, it isn't necessarily so if you are building a
kernel that runs across a wide variety of machines.

To cover the range of more common machines today, we allow
NR_CPUS to be up to 4096 when CPUMASK_OFFSTACK is enabled.

Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Cc: prarit@redhat.com
Cc: Russ Anderson <rja@sgi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20131105143728.GJ9944@hansolo.jdub.homelinux.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/Kconfig | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f67e839f06c8..f03e428112eb 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -825,14 +825,16 @@ config MAXSMP
 config NR_CPUS
 	int "Maximum number of CPUs" if SMP && !MAXSMP
 	range 2 8 if SMP && X86_32 && !X86_BIGSMP
-	range 2 512 if SMP && !MAXSMP
+	range 2 512 if SMP && !MAXSMP && !CPUMASK_OFFSTACK
+	range 2 4096 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64
 	default "1" if !SMP
 	default "4096" if MAXSMP
 	default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000)
 	default "8" if SMP
 	---help---
 	  This allows you to specify the maximum number of CPUs which this
-	  kernel will support.  The maximum supported value is 512 and the
+	  kernel will support.  If CPUMASK_OFFSTACK is enabled, the maximum
+	  supported value is 4096, otherwise the maximum value is 512.  The
 	  minimum value which makes sense is 2.
 
 	  This is purely to save memory - each supported CPU adds
-- 
cgit v1.2.3


From b53b5eda8194214928c8243d711a75dbf51809fc Mon Sep 17 00:00:00 2001
From: Josh Boyer
Date: Tue, 5 Nov 2013 09:38:16 -0500
Subject: x86/cpu: Increase max CPU count to 8192

The MAXSMP option is intended to enable silly large numbers of
CPUs for testing purposes.  The current value of 4096 isn't very
silly any longer as there are actual SGI machines that approach
6096 CPUs when taking HT into account.

Increase the value to a nice round 8192 to account for this and
allow for short term future increases.

Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Cc: prarit@redhat.com
Cc: Russ Anderson <rja@sgi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20131105143816.GK9944@hansolo.jdub.homelinux.org
[ Tweaked it so that MAXSMP simply sets the maximum of the normal range. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f03e428112eb..805469a57d9d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -826,9 +826,9 @@ config NR_CPUS
 	int "Maximum number of CPUs" if SMP && !MAXSMP
 	range 2 8 if SMP && X86_32 && !X86_BIGSMP
 	range 2 512 if SMP && !MAXSMP && !CPUMASK_OFFSTACK
-	range 2 4096 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64
+	range 2 8192 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64
 	default "1" if !SMP
-	default "4096" if MAXSMP
+	default "8192" if MAXSMP
 	default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000)
 	default "8" if SMP
 	---help---
-- 
cgit v1.2.3


From edf6844ebf4d66546caf2a75e9d05e579990678c Mon Sep 17 00:00:00 2001
From: Michael Opdenacker
Date: Mon, 4 Nov 2013 09:30:18 +0100
Subject: microblaze: Remove unused NO_MMU Kconfig parameter

This removes the NO_MMU Kconfig parameter,
which was no longer used anywhere in the source code
and Makefiles.

This also updates a comment refering to this parameter.

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/Kconfig                       | 5 -----
 arch/microblaze/kernel/hw_exception_handler.S | 4 ++--
 2 files changed, 2 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index b82f82b74319..d8ec74b4d1ee 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -82,11 +82,6 @@ config MMU
 	bool "MMU support"
 	default n
 
-config NO_MMU
-	bool
-	depends on !MMU
-	default y
-
 comment "Boot options"
 
 config CMDLINE_BOOL
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 61b3a1fed46f..fc6b89f4dd31 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -193,8 +193,8 @@
  *      -                            W   S   REG   EXC
  *
  *
- * STACK FRAME STRUCTURE (for NO_MMU)
- * ---------------------------------
+ * STACK FRAME STRUCTURE (for CONFIG_MMU=n)
+ * ----------------------------------------
  *
  *      +-------------+         + 0
  *      |     MSR     |
-- 
cgit v1.2.3


From 95281171a713f4d32f1a044b937563ec7776ccfe Mon Sep 17 00:00:00 2001
From: James Hogan
Date: Tue, 5 Nov 2013 14:42:03 +0000
Subject: metag: handle low level kicks directly

Kick interrupts trigger the LWK (low level kick) signal, usually handled
by the __TBIDoStdLWK() function which is the only handler inherited from
the bootloader. The LWK signal is converted either to a SWK (plain
software kick) or a SWS (software kick with an attached message).

Linux has kick_handler() to handle SWK and call registered kick handlers
(IPIs and inter-thread comms), but SWS is as far as I'm aware unused
with Linux.

Therefore remove that abstraction and have Linux handle LWK directly.
This will reduce kick latency slightly, and reduce our dependence on the
bootloader, which makes it easier to directly boot a kernel in QEMU
(particularly for SMP).

Signed-off-by: James Hogan <james.hogan@imgtec.com>
---
 arch/metag/include/asm/tbx.h | 19 +++++++------------
 arch/metag/kernel/setup.c    |  6 +-----
 arch/metag/kernel/traps.c    |  5 ++---
 arch/metag/tbx/tbidefr.S     |  2 +-
 4 files changed, 11 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/metag/include/asm/tbx.h b/arch/metag/include/asm/tbx.h
index 287b36ff8ad1..703b9cb0ac5c 100644
--- a/arch/metag/include/asm/tbx.h
+++ b/arch/metag/include/asm/tbx.h
@@ -150,11 +150,9 @@
 #else
 /* Reserved 0x04-0x09 */
 #endif
-#define TBID_SIGNUM_SWS     0x0A /* KICK received with SigMask != 0 */
-#define TBID_SIGNUM_SWK     0x0B /* KICK received with SigMask == 0 */
-/* Reserved 0x0C-0x0F */
+/* Reserved 0x0A-0x0F */
 #define TBID_SIGNUM_TRT     0x10 /* Timer trigger */
-#define TBID_SIGNUM_LWK     0x11 /* Low level kick (handler provided by TBI) */
+#define TBID_SIGNUM_LWK     0x11 /* Low level kick */
 #define TBID_SIGNUM_XXF     0x12 /* Fault handler - receives ALL _xxF sigs */
 #ifdef TBI_1_4
 #define TBID_SIGNUM_DFR     0x13 /* Deferred Exception handler */
@@ -183,8 +181,7 @@
    each hardware signal, sometimes this is a many-to-one relationship. */
 #define TBI_TRIG_BIT(SigNum)                                      (\
     ((SigNum) >= TBID_SIGNUM_TRT) ? 1<<((SigNum)-TBID_SIGNUM_TRT) :\
-    ( ((SigNum) == TBID_SIGNUM_SWS) ||                             \
-      ((SigNum) == TBID_SIGNUM_SWK)    ) ?                         \
+    ((SigNum) == TBID_SIGNUM_LWK) ?                                \
                          TXSTAT_KICK_BIT : TXSTATI_BGNDHALT_BIT    )
 
 /* Return the hardware trigger vector number for entries in the
@@ -687,10 +684,8 @@ typedef union _tbires_tag_ {
    Triggers will indicate the status of TXSTAT or TXSTATI sampled by the
           code that called the handler.
           
-   InstOrSWSId is defined firstly as 'Inst' if the SigNum is TBID_SIGNUM_SWx
-          and hold the actual SWITCH instruction detected, secondly if SigNum
-          is TBID_SIGNUM_SWS the 'SWSId' is defined to hold the Id of the
-          software signal detected, in other cases the value of this
+   Inst is defined as 'Inst' if the SigNum is TBID_SIGNUM_SWx and holds the
+          actual SWITCH instruction detected, in other cases the value of this
           parameter is undefined.
    
    pTBI   points at the PTBI structure related to the thread and processing
@@ -709,7 +704,7 @@ typedef union _tbires_tag_ {
 
  */
 typedef TBIRES (*PTBIAPIFN)( TBIRES State, int SigNum,
-                             int Triggers, int InstOrSWSId,
+                             int Triggers, int Inst,
                              volatile struct _tbi_tag_ *pTBI );
 #endif /* ifndef __ASSEMBLY__ */
 
@@ -757,7 +752,7 @@ typedef volatile struct _tbi_tag_ {
 #ifndef __ASSEMBLY__
 /* This handler should be used for TBID_SIGNUM_DFR */
 extern TBIRES __TBIHandleDFR ( TBIRES State, int SigNum,
-                               int Triggers, int InstOrSWSId,
+                               int Triggers, int Inst,
                                volatile struct _tbi_tag_ *pTBI );
 #endif
 #endif
diff --git a/arch/metag/kernel/setup.c b/arch/metag/kernel/setup.c
index c396cd0b425f..e639bae09645 100644
--- a/arch/metag/kernel/setup.c
+++ b/arch/metag/kernel/setup.c
@@ -302,13 +302,9 @@ void __init setup_arch(char **cmdline_p)
 	 * rather than the version from the bootloader. This makes call
 	 * stacks easier to understand and may allow us to unmap the
 	 * bootloader at some point.
-	 *
-	 * We need to keep the LWK handler that TBI installed in order to
-	 * be able to do inter-thread comms.
 	 */
 	for (i = 0; i <= TBID_SIGNUM_MAX; i++)
-		if (i != TBID_SIGNUM_LWK)
-			_pTBI->fnSigs[i] = __TBIUnExpXXX;
+		_pTBI->fnSigs[i] = __TBIUnExpXXX;
 
 	/* A Meta requirement is that the kernel is loaded (virtually)
 	 * at the PAGE_OFFSET.
diff --git a/arch/metag/kernel/traps.c b/arch/metag/kernel/traps.c
index 25f9d1c2ffec..17b2e2e38d5a 100644
--- a/arch/metag/kernel/traps.c
+++ b/arch/metag/kernel/traps.c
@@ -819,8 +819,7 @@ void per_cpu_trap_init(unsigned long cpu)
 
 	set_trigger_mask(TBI_INTS_INIT(thread) | /* interrupts */
 			 TBI_TRIG_BIT(TBID_SIGNUM_LWK) | /* low level kick */
-			 TBI_TRIG_BIT(TBID_SIGNUM_SW1) |
-			 TBI_TRIG_BIT(TBID_SIGNUM_SWS));
+			 TBI_TRIG_BIT(TBID_SIGNUM_SW1));
 
 	/* non-priv - use current stack */
 	int_context.Sig.pCtx = NULL;
@@ -842,7 +841,7 @@ void __init trap_init(void)
 	_pTBI->fnSigs[TBID_SIGNUM_SW1] = switch1_handler;
 	_pTBI->fnSigs[TBID_SIGNUM_SW2] = switchx_handler;
 	_pTBI->fnSigs[TBID_SIGNUM_SW3] = switchx_handler;
-	_pTBI->fnSigs[TBID_SIGNUM_SWK] = kick_handler;
+	_pTBI->fnSigs[TBID_SIGNUM_LWK] = kick_handler;
 
 #ifdef CONFIG_METAG_META21
 	_pTBI->fnSigs[TBID_SIGNUM_DFR] = __TBIHandleDFR;
diff --git a/arch/metag/tbx/tbidefr.S b/arch/metag/tbx/tbidefr.S
index 3eb165ebf540..8f0902b22f70 100644
--- a/arch/metag/tbx/tbidefr.S
+++ b/arch/metag/tbx/tbidefr.S
@@ -20,7 +20,7 @@
 /* D1Ar1:D0Ar2 -- State
  * D0Ar3       -- SigNum
  * D0Ar4       -- Triggers
- * D1Ar5       -- InstOrSWSId
+ * D1Ar5       -- Inst
  * D0Ar6       -- pTBI (volatile)
  */
 ___TBIHandleDFR:
-- 
cgit v1.2.3


From 0a196848ca365ec582c6d86659be456be6d4ed96 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra
Date: Wed, 30 Oct 2013 21:16:22 +0100
Subject: perf: Fix arch_perf_out_copy_user default

The arch_perf_output_copy_user() default of
__copy_from_user_inatomic() returns bytes not copied, while all other
argument functions given DEFINE_OUTPUT_COPY() return bytes copied.

Since copy_from_user_nmi() is the odd duck out by returning bytes
copied where all other *copy_{to,from}* functions return bytes not
copied, change it over and ammend DEFINE_OUTPUT_COPY() to expect bytes
not copied.

Oddly enough DEFINE_OUTPUT_COPY() already returned bytes not copied
while expecting its worker functions to return bytes copied.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: will.deacon@arm.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20131030201622.GR16117@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/cpu/perf_event.c           |  4 ++--
 arch/x86/kernel/cpu/perf_event_intel_ds.c  |  2 +-
 arch/x86/kernel/cpu/perf_event_intel_lbr.c |  2 +-
 arch/x86/lib/usercopy.c                    |  2 +-
 arch/x86/oprofile/backtrace.c              |  4 ++--
 kernel/events/internal.h                   | 35 ++++++++++++++++++++++--------
 6 files changed, 33 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index 8a87a3224121..8e132931614d 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -1989,7 +1989,7 @@ perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry)
 		frame.return_address = 0;
 
 		bytes = copy_from_user_nmi(&frame, fp, sizeof(frame));
-		if (bytes != sizeof(frame))
+		if (bytes != 0)
 			break;
 
 		if (!valid_user_frame(fp, sizeof(frame)))
@@ -2041,7 +2041,7 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
 		frame.return_address = 0;
 
 		bytes = copy_from_user_nmi(&frame, fp, sizeof(frame));
-		if (bytes != sizeof(frame))
+		if (bytes != 0)
 			break;
 
 		if (!valid_user_frame(fp, sizeof(frame)))
diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index c1760ff3c757..ae96cfa5eddd 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -789,7 +789,7 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs)
 
 		size = ip - to; /* Must fit our buffer, see above */
 		bytes = copy_from_user_nmi(buf, (void __user *)to, size);
-		if (bytes != size)
+		if (bytes != 0)
 			return 0;
 
 		kaddr = buf;
diff --git a/arch/x86/kernel/cpu/perf_event_intel_lbr.c b/arch/x86/kernel/cpu/perf_event_intel_lbr.c
index 90ee6c1d0542..d82d155aca8c 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_lbr.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_lbr.c
@@ -491,7 +491,7 @@ static int branch_type(unsigned long from, unsigned long to, int abort)
 
 		/* may fail if text not present */
 		bytes = copy_from_user_nmi(buf, (void __user *)from, size);
-		if (bytes != size)
+		if (bytes != 0)
 			return X86_BR_NONE;
 
 		addr = buf;
diff --git a/arch/x86/lib/usercopy.c b/arch/x86/lib/usercopy.c
index 5465b8613944..ddf9ecb53cc3 100644
--- a/arch/x86/lib/usercopy.c
+++ b/arch/x86/lib/usercopy.c
@@ -31,6 +31,6 @@ copy_from_user_nmi(void *to, const void __user *from, unsigned long n)
 	ret = __copy_from_user_inatomic(to, from, n);
 	pagefault_enable();
 
-	return n - ret;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(copy_from_user_nmi);
diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c
index d6aa6e8315d1..5d04be5efb64 100644
--- a/arch/x86/oprofile/backtrace.c
+++ b/arch/x86/oprofile/backtrace.c
@@ -47,7 +47,7 @@ dump_user_backtrace_32(struct stack_frame_ia32 *head)
 	unsigned long bytes;
 
 	bytes = copy_from_user_nmi(bufhead, head, sizeof(bufhead));
-	if (bytes != sizeof(bufhead))
+	if (bytes != 0)
 		return NULL;
 
 	fp = (struct stack_frame_ia32 *) compat_ptr(bufhead[0].next_frame);
@@ -93,7 +93,7 @@ static struct stack_frame *dump_user_backtrace(struct stack_frame *head)
 	unsigned long bytes;
 
 	bytes = copy_from_user_nmi(bufhead, head, sizeof(bufhead));
-	if (bytes != sizeof(bufhead))
+	if (bytes != 0)
 		return NULL;
 
 	oprofile_add_trace(bufhead[0].return_address);
diff --git a/kernel/events/internal.h b/kernel/events/internal.h
index ca6599723be5..569b218782ad 100644
--- a/kernel/events/internal.h
+++ b/kernel/events/internal.h
@@ -82,16 +82,16 @@ static inline unsigned long perf_data_size(struct ring_buffer *rb)
 }
 
 #define DEFINE_OUTPUT_COPY(func_name, memcpy_func)			\
-static inline unsigned int						\
+static inline unsigned long						\
 func_name(struct perf_output_handle *handle,				\
-	  const void *buf, unsigned int len)				\
+	  const void *buf, unsigned long len)				\
 {									\
 	unsigned long size, written;					\
 									\
 	do {								\
-		size = min_t(unsigned long, handle->size, len);		\
-									\
+		size    = min(handle->size, len);			\
 		written = memcpy_func(handle->addr, buf, size);		\
+		written = size - written;				\
 									\
 		len -= written;						\
 		handle->addr += written;				\
@@ -110,20 +110,37 @@ func_name(struct perf_output_handle *handle,				\
 	return len;							\
 }
 
-static inline int memcpy_common(void *dst, const void *src, size_t n)
+static inline unsigned long
+memcpy_common(void *dst, const void *src, unsigned long n)
 {
 	memcpy(dst, src, n);
-	return n;
+	return 0;
 }
 
 DEFINE_OUTPUT_COPY(__output_copy, memcpy_common)
 
-#define MEMCPY_SKIP(dst, src, n) (n)
+static inline unsigned long
+memcpy_skip(void *dst, const void *src, unsigned long n)
+{
+	return 0;
+}
 
-DEFINE_OUTPUT_COPY(__output_skip, MEMCPY_SKIP)
+DEFINE_OUTPUT_COPY(__output_skip, memcpy_skip)
 
 #ifndef arch_perf_out_copy_user
-#define arch_perf_out_copy_user __copy_from_user_inatomic
+#define arch_perf_out_copy_user arch_perf_out_copy_user
+
+static inline unsigned long
+arch_perf_out_copy_user(void *dst, const void *src, unsigned long n)
+{
+	unsigned long ret;
+
+	pagefault_disable();
+	ret = __copy_from_user_inatomic(dst, src, n);
+	pagefault_enable();
+
+	return ret;
+}
 #endif
 
 DEFINE_OUTPUT_COPY(__output_copy_user, arch_perf_out_copy_user)
-- 
cgit v1.2.3


From d1e8f4a8365d16fd179cb8cad5b4d20aafd0a695 Mon Sep 17 00:00:00 2001
From: Yan, Zheng
Date: Thu, 31 Oct 2013 13:36:54 +0800
Subject: perf/x86/intel/uncore: Add filter support for IvyBridge-EP QPI boxes

The encoding for filter registers of IvyBridge-EP uncore QPI boxes is
completely the same as SandyBridge-EP.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: eranian@google.com
Cc: "Yan Zheng" <zheng.z.yan@intel.com>
Link: http://lkml.kernel.org/r/1383197815-17706-1-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/cpu/perf_event_intel_uncore.c | 61 ++++++++++++++++++++++-----
 1 file changed, 51 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c
index 4118f9f68315..6da399943ac6 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c
@@ -1099,6 +1099,24 @@ static struct attribute *ivt_uncore_qpi_formats_attr[] = {
 	&format_attr_umask.attr,
 	&format_attr_edge.attr,
 	&format_attr_thresh8.attr,
+	&format_attr_match_rds.attr,
+	&format_attr_match_rnid30.attr,
+	&format_attr_match_rnid4.attr,
+	&format_attr_match_dnid.attr,
+	&format_attr_match_mc.attr,
+	&format_attr_match_opc.attr,
+	&format_attr_match_vnw.attr,
+	&format_attr_match0.attr,
+	&format_attr_match1.attr,
+	&format_attr_mask_rds.attr,
+	&format_attr_mask_rnid30.attr,
+	&format_attr_mask_rnid4.attr,
+	&format_attr_mask_dnid.attr,
+	&format_attr_mask_mc.attr,
+	&format_attr_mask_opc.attr,
+	&format_attr_mask_vnw.attr,
+	&format_attr_mask0.attr,
+	&format_attr_mask1.attr,
 	NULL,
 };
 
@@ -1312,17 +1330,30 @@ static struct intel_uncore_type ivt_uncore_imc = {
 	IVT_UNCORE_PCI_COMMON_INIT(),
 };
 
+static struct intel_uncore_ops ivt_uncore_qpi_ops = {
+	.init_box	= ivt_uncore_pci_init_box,
+	.disable_box	= snbep_uncore_pci_disable_box,
+	.enable_box	= snbep_uncore_pci_enable_box,
+	.disable_event	= snbep_uncore_pci_disable_event,
+	.enable_event	= snbep_qpi_enable_event,
+	.read_counter	= snbep_uncore_pci_read_counter,
+	.hw_config	= snbep_qpi_hw_config,
+	.get_constraint	= uncore_get_constraint,
+	.put_constraint	= uncore_put_constraint,
+};
+
 static struct intel_uncore_type ivt_uncore_qpi = {
-	.name		= "qpi",
-	.num_counters   = 4,
-	.num_boxes	= 3,
-	.perf_ctr_bits	= 48,
-	.perf_ctr	= SNBEP_PCI_PMON_CTR0,
-	.event_ctl	= SNBEP_PCI_PMON_CTL0,
-	.event_mask	= IVT_QPI_PCI_PMON_RAW_EVENT_MASK,
-	.box_ctl	= SNBEP_PCI_PMON_BOX_CTL,
-	.ops		= &ivt_uncore_pci_ops,
-	.format_group	= &ivt_uncore_qpi_format_group,
+	.name			= "qpi",
+	.num_counters		= 4,
+	.num_boxes		= 3,
+	.perf_ctr_bits		= 48,
+	.perf_ctr		= SNBEP_PCI_PMON_CTR0,
+	.event_ctl		= SNBEP_PCI_PMON_CTL0,
+	.event_mask		= IVT_QPI_PCI_PMON_RAW_EVENT_MASK,
+	.box_ctl		= SNBEP_PCI_PMON_BOX_CTL,
+	.num_shared_regs	= 1,
+	.ops			= &ivt_uncore_qpi_ops,
+	.format_group		= &ivt_uncore_qpi_format_group,
 };
 
 static struct intel_uncore_type ivt_uncore_r2pcie = {
@@ -1429,6 +1460,16 @@ static DEFINE_PCI_DEVICE_TABLE(ivt_uncore_pci_ids) = {
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe3e),
 		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_R3QPI, 2),
 	},
+	{ /* QPI Port 0 filter  */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe86),
+		.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV,
+						   SNBEP_PCI_QPI_PORT0_FILTER),
+	},
+	{ /* QPI Port 0 filter  */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe96),
+		.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV,
+						   SNBEP_PCI_QPI_PORT1_FILTER),
+	},
 	{ /* end: all zeroes */ }
 };
 
-- 
cgit v1.2.3


From f891d8cfb8372eb9cfe9d0d4ca61c75bafeaae37 Mon Sep 17 00:00:00 2001
From: Yan, Zheng
Date: Thu, 31 Oct 2013 13:36:55 +0800
Subject: perf/x86/intel: Add Ivy Bridge-EP uncore IRP box support

Unlike other uncore boxes, IRP boxes live in PCI buses with no UBOX
device. For PCI bus without UBOX device, we find the next bus that
has UBOX device and use its 'bus to socket' mapping.

Besides the counter/control registers in IRP boxes are not properly
aligned.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: eranian@google.com
Cc: "Yan Zheng" <zheng.z.yan@intel.com>
Link: http://lkml.kernel.org/r/1383197815-17706-2-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/cpu/perf_event_intel_uncore.c | 73 +++++++++++++++++++++++++++
 1 file changed, 73 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c
index 6da399943ac6..29c248799ced 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c
@@ -997,6 +997,20 @@ static int snbep_pci2phy_map_init(int devid)
 		}
 	}
 
+	if (!err) {
+		/*
+		 * For PCI bus with no UBOX device, find the next bus
+		 * that has UBOX device and use its mapping.
+		 */
+		i = -1;
+		for (bus = 255; bus >= 0; bus--) {
+			if (pcibus_to_physid[bus] >= 0)
+				i = pcibus_to_physid[bus];
+			else
+				pcibus_to_physid[bus] = i;
+		}
+	}
+
 	if (ubox_dev)
 		pci_dev_put(ubox_dev);
 
@@ -1330,6 +1344,59 @@ static struct intel_uncore_type ivt_uncore_imc = {
 	IVT_UNCORE_PCI_COMMON_INIT(),
 };
 
+/* registers in IRP boxes are not properly aligned */
+static unsigned ivt_uncore_irp_ctls[] = {0xd8, 0xdc, 0xe0, 0xe4};
+static unsigned ivt_uncore_irp_ctrs[] = {0xa0, 0xb0, 0xb8, 0xc0};
+
+static void ivt_uncore_irp_enable_event(struct intel_uncore_box *box, struct perf_event *event)
+{
+	struct pci_dev *pdev = box->pci_dev;
+	struct hw_perf_event *hwc = &event->hw;
+
+	pci_write_config_dword(pdev, ivt_uncore_irp_ctls[hwc->idx],
+			       hwc->config | SNBEP_PMON_CTL_EN);
+}
+
+static void ivt_uncore_irp_disable_event(struct intel_uncore_box *box, struct perf_event *event)
+{
+	struct pci_dev *pdev = box->pci_dev;
+	struct hw_perf_event *hwc = &event->hw;
+
+	pci_write_config_dword(pdev, ivt_uncore_irp_ctls[hwc->idx], hwc->config);
+}
+
+static u64 ivt_uncore_irp_read_counter(struct intel_uncore_box *box, struct perf_event *event)
+{
+	struct pci_dev *pdev = box->pci_dev;
+	struct hw_perf_event *hwc = &event->hw;
+	u64 count = 0;
+
+	pci_read_config_dword(pdev, ivt_uncore_irp_ctrs[hwc->idx], (u32 *)&count);
+	pci_read_config_dword(pdev, ivt_uncore_irp_ctrs[hwc->idx] + 4, (u32 *)&count + 1);
+
+	return count;
+}
+
+static struct intel_uncore_ops ivt_uncore_irp_ops = {
+	.init_box	= ivt_uncore_pci_init_box,
+	.disable_box	= snbep_uncore_pci_disable_box,
+	.enable_box	= snbep_uncore_pci_enable_box,
+	.disable_event	= ivt_uncore_irp_disable_event,
+	.enable_event	= ivt_uncore_irp_enable_event,
+	.read_counter	= ivt_uncore_irp_read_counter,
+};
+
+static struct intel_uncore_type ivt_uncore_irp = {
+	.name			= "irp",
+	.num_counters		= 4,
+	.num_boxes		= 1,
+	.perf_ctr_bits		= 48,
+	.event_mask		= IVT_PMON_RAW_EVENT_MASK,
+	.box_ctl		= SNBEP_PCI_PMON_BOX_CTL,
+	.ops			= &ivt_uncore_irp_ops,
+	.format_group		= &ivt_uncore_format_group,
+};
+
 static struct intel_uncore_ops ivt_uncore_qpi_ops = {
 	.init_box	= ivt_uncore_pci_init_box,
 	.disable_box	= snbep_uncore_pci_disable_box,
@@ -1377,6 +1444,7 @@ static struct intel_uncore_type ivt_uncore_r3qpi = {
 enum {
 	IVT_PCI_UNCORE_HA,
 	IVT_PCI_UNCORE_IMC,
+	IVT_PCI_UNCORE_IRP,
 	IVT_PCI_UNCORE_QPI,
 	IVT_PCI_UNCORE_R2PCIE,
 	IVT_PCI_UNCORE_R3QPI,
@@ -1385,6 +1453,7 @@ enum {
 static struct intel_uncore_type *ivt_pci_uncores[] = {
 	[IVT_PCI_UNCORE_HA]	= &ivt_uncore_ha,
 	[IVT_PCI_UNCORE_IMC]	= &ivt_uncore_imc,
+	[IVT_PCI_UNCORE_IRP]	= &ivt_uncore_irp,
 	[IVT_PCI_UNCORE_QPI]	= &ivt_uncore_qpi,
 	[IVT_PCI_UNCORE_R2PCIE]	= &ivt_uncore_r2pcie,
 	[IVT_PCI_UNCORE_R3QPI]	= &ivt_uncore_r3qpi,
@@ -1432,6 +1501,10 @@ static DEFINE_PCI_DEVICE_TABLE(ivt_uncore_pci_ids) = {
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xef1),
 		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_IMC, 7),
 	},
+	{ /* IRP */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe39),
+		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_IRP, 0),
+	},
 	{ /* QPI0 Port 0 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe32),
 		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_QPI, 0),
-- 
cgit v1.2.3


From 4c08edd305019061bf1ac95ce089497bdbb8b8ac Mon Sep 17 00:00:00 2001
From: H. Peter Anvin
Date: Wed, 6 Nov 2013 10:00:05 -0800
Subject: x86, hyperv: Move a variable to avoid an unused variable warning

The variable hv_lapic_frequency causes an unused variable warning if
CONFIG_X86_LOCAL_APIC is disabled.  Since the variable is only used
inside a small if statement, move the declaration of that variable
into the if statement itself.

Cc: K. Y. Srinivasan <kys@microsoft.com>
Link: http://lkml.kernel.org/r/1381444224-3303-1-git-send-email-kys@microsoft.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/cpu/mshyperv.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 9f6e9f89d9d6..9f7ca266864a 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -70,8 +70,6 @@ static struct clocksource hyperv_cs = {
 
 static void __init ms_hyperv_init_platform(void)
 {
-	u64	hv_lapic_frequency;
-
 	/*
 	 * Extract the features and hints
 	 */
@@ -86,6 +84,8 @@ static void __init ms_hyperv_init_platform(void)
 		/*
 		 * Get the APIC frequency.
 		 */
+		u64	hv_lapic_frequency;
+
 		rdmsrl(HV_X64_MSR_APIC_FREQUENCY, hv_lapic_frequency);
 		hv_lapic_frequency = div_u64(hv_lapic_frequency, HZ);
 		lapic_timer_frequency = hv_lapic_frequency;
-- 
cgit v1.2.3


From 3820b4d2789f5166afdb136bb14f93166e6cfbc2 Mon Sep 17 00:00:00 2001
From: David A. Long
Date: Tue, 15 Oct 2013 17:04:16 -0400
Subject: uprobes: Move function declarations out of arch

Move the function declarations from the arch headers to the common
header, since only the function bodies are architecture-specific.
These changes are from Vincent Rabin's uprobes patch.

[ oleg: update arch/powerpc/include/asm/uprobes.h ]

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
---
 arch/powerpc/include/asm/uprobes.h | 7 -------
 arch/x86/include/asm/uprobes.h     | 7 -------
 include/linux/uprobes.h            | 8 ++++++++
 3 files changed, 8 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/uprobes.h b/arch/powerpc/include/asm/uprobes.h
index 23016020915e..b6fc3178372a 100644
--- a/arch/powerpc/include/asm/uprobes.h
+++ b/arch/powerpc/include/asm/uprobes.h
@@ -45,11 +45,4 @@ struct arch_uprobe_task {
 	unsigned long	saved_trap_nr;
 };
 
-extern int  arch_uprobe_analyze_insn(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long addr);
-extern int  arch_uprobe_pre_xol(struct arch_uprobe *aup, struct pt_regs *regs);
-extern int  arch_uprobe_post_xol(struct arch_uprobe *aup, struct pt_regs *regs);
-extern bool arch_uprobe_xol_was_trapped(struct task_struct *tsk);
-extern int  arch_uprobe_exception_notify(struct notifier_block *self, unsigned long val, void *data);
-extern void arch_uprobe_abort_xol(struct arch_uprobe *aup, struct pt_regs *regs);
-extern unsigned long arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr, struct pt_regs *regs);
 #endif	/* _ASM_UPROBES_H */
diff --git a/arch/x86/include/asm/uprobes.h b/arch/x86/include/asm/uprobes.h
index 6e5197910fd8..b20b4d68b934 100644
--- a/arch/x86/include/asm/uprobes.h
+++ b/arch/x86/include/asm/uprobes.h
@@ -49,11 +49,4 @@ struct arch_uprobe_task {
 	unsigned int			saved_tf;
 };
 
-extern int  arch_uprobe_analyze_insn(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long addr);
-extern int  arch_uprobe_pre_xol(struct arch_uprobe *aup, struct pt_regs *regs);
-extern int  arch_uprobe_post_xol(struct arch_uprobe *aup, struct pt_regs *regs);
-extern bool arch_uprobe_xol_was_trapped(struct task_struct *tsk);
-extern int  arch_uprobe_exception_notify(struct notifier_block *self, unsigned long val, void *data);
-extern void arch_uprobe_abort_xol(struct arch_uprobe *aup, struct pt_regs *regs);
-extern unsigned long arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr, struct pt_regs *regs);
 #endif	/* _ASM_UPROBES_H */
diff --git a/include/linux/uprobes.h b/include/linux/uprobes.h
index 9e0d5a6fe7a8..28473e3f6068 100644
--- a/include/linux/uprobes.h
+++ b/include/linux/uprobes.h
@@ -30,6 +30,7 @@
 struct vm_area_struct;
 struct mm_struct;
 struct inode;
+struct notifier_block;
 
 #ifdef CONFIG_ARCH_SUPPORTS_UPROBES
 # include <asm/uprobes.h>
@@ -125,6 +126,13 @@ extern void uprobe_notify_resume(struct pt_regs *regs);
 extern bool uprobe_deny_signal(void);
 extern bool arch_uprobe_skip_sstep(struct arch_uprobe *aup, struct pt_regs *regs);
 extern void uprobe_clear_state(struct mm_struct *mm);
+extern int  arch_uprobe_analyze_insn(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long addr);
+extern int  arch_uprobe_pre_xol(struct arch_uprobe *aup, struct pt_regs *regs);
+extern int  arch_uprobe_post_xol(struct arch_uprobe *aup, struct pt_regs *regs);
+extern bool arch_uprobe_xol_was_trapped(struct task_struct *tsk);
+extern int  arch_uprobe_exception_notify(struct notifier_block *self, unsigned long val, void *data);
+extern void arch_uprobe_abort_xol(struct arch_uprobe *aup, struct pt_regs *regs);
+extern unsigned long arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr, struct pt_regs *regs);
 #else /* !CONFIG_UPROBES */
 struct uprobes_state {
 };
-- 
cgit v1.2.3


From 8a8de66c4f6ebd0f6d3da026ec24339aa5d1db12 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov
Date: Mon, 4 Nov 2013 20:27:13 +0100
Subject: uprobes: Introduce arch_uprobe->ixol

Currently xol_get_insn_slot() assumes that we should simply copy
arch_uprobe->insn[] which is (ignoring arch_uprobe_analyze_insn)
just the copy of the original insn.

This is not true for arm which needs to create another insn to
execute it out-of-line.

So this patch simply adds the new member, ->ixol into the union.
This doesn't make any difference for x86 and powerpc, but arm
can divorce insn/ixol and initialize the correct xol insn in
arch_uprobe_analyze_insn().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
---
 arch/powerpc/include/asm/uprobes.h | 1 +
 arch/x86/include/asm/uprobes.h     | 5 ++++-
 kernel/events/uprobes.c            | 3 ++-
 3 files changed, 7 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/uprobes.h b/arch/powerpc/include/asm/uprobes.h
index b6fc3178372a..75c6ecdb8f37 100644
--- a/arch/powerpc/include/asm/uprobes.h
+++ b/arch/powerpc/include/asm/uprobes.h
@@ -37,6 +37,7 @@ typedef ppc_opcode_t uprobe_opcode_t;
 struct arch_uprobe {
 	union {
 		u8	insn[MAX_UINSN_BYTES];
+		u8	ixol[MAX_UINSN_BYTES];
 		u32	ainsn;
 	};
 };
diff --git a/arch/x86/include/asm/uprobes.h b/arch/x86/include/asm/uprobes.h
index b20b4d68b934..3087ea9c5f2e 100644
--- a/arch/x86/include/asm/uprobes.h
+++ b/arch/x86/include/asm/uprobes.h
@@ -35,7 +35,10 @@ typedef u8 uprobe_opcode_t;
 
 struct arch_uprobe {
 	u16				fixups;
-	u8				insn[MAX_UINSN_BYTES];
+	union {
+		u8			insn[MAX_UINSN_BYTES];
+		u8			ixol[MAX_UINSN_BYTES];
+	};
 #ifdef CONFIG_X86_64
 	unsigned long			rip_rela_target_address;
 #endif
diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
index 0012c8ebb098..fbcff61b5099 100644
--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -1264,7 +1264,8 @@ static unsigned long xol_get_insn_slot(struct uprobe *uprobe)
 		return 0;
 
 	/* Initialize the slot */
-	copy_to_page(area->page, xol_vaddr, uprobe->arch.insn, MAX_UINSN_BYTES);
+	copy_to_page(area->page, xol_vaddr,
+			uprobe->arch.ixol, sizeof(uprobe->arch.ixol));
 	/*
 	 * We probably need flush_icache_user_range() but it needs vma.
 	 * This should work on supported architectures too.
-- 
cgit v1.2.3


From e363bbac316ffb5daaf45d855f82680148cafe20 Mon Sep 17 00:00:00 2001
From: Jayachandran C
Date: Mon, 4 Nov 2013 17:51:54 +0530
Subject: MIPS: Netlogic: replace early_init_devtree() call

The early_init_devtree() API was removed in linux-next for 3.13 with
commit "mips: use early_init_dt_scan". This causes Netlogic XLP compile
to fail:

arch/mips/netlogic/xlp/setup.c:101: undefined reference to `early_init_devtree'

Add xlp_early_init_devtree() which uses the __dt_setup_arch() to
handle early device tree related initialization to fix this.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
---
 arch/mips/include/asm/netlogic/xlp-hal/xlp.h |  1 +
 arch/mips/netlogic/xlp/dt.c                  | 18 ++++++++++++++----
 arch/mips/netlogic/xlp/setup.c               |  2 +-
 3 files changed, 16 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/netlogic/xlp-hal/xlp.h b/arch/mips/include/asm/netlogic/xlp-hal/xlp.h
index 17daffb280a3..470f2095b346 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/xlp.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/xlp.h
@@ -69,6 +69,7 @@ void nlm_hal_init(void);
 int xlp_get_dram_map(int n, uint64_t *dram_map);
 
 /* Device tree related */
+void xlp_early_init_devtree(void);
 void *xlp_dt_init(void *fdtp);
 
 static inline int cpu_is_xlpii(void)
diff --git a/arch/mips/netlogic/xlp/dt.c b/arch/mips/netlogic/xlp/dt.c
index 88df445dda76..8316d5454b17 100644
--- a/arch/mips/netlogic/xlp/dt.c
+++ b/arch/mips/netlogic/xlp/dt.c
@@ -39,8 +39,11 @@
 #include <linux/of_platform.h>
 #include <linux/of_device.h>
 
+#include <asm/prom.h>
+
 extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[],
 	__dtb_xlp_fvp_begin[], __dtb_start[];
+static void *xlp_fdt_blob;
 
 void __init *xlp_dt_init(void *fdtp)
 {
@@ -67,19 +70,26 @@ void __init *xlp_dt_init(void *fdtp)
 			break;
 		}
 	}
-	initial_boot_params = fdtp;
+	xlp_fdt_blob = fdtp;
 	return fdtp;
 }
 
+void __init xlp_early_init_devtree(void)
+{
+	__dt_setup_arch(xlp_fdt_blob);
+	strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+}
+
 void __init device_tree_init(void)
 {
 	unsigned long base, size;
+	struct boot_param_header *fdtp = xlp_fdt_blob;
 
-	if (!initial_boot_params)
+	if (!fdtp)
 		return;
 
-	base = virt_to_phys((void *)initial_boot_params);
-	size = be32_to_cpu(initial_boot_params->totalsize);
+	base = virt_to_phys(fdtp);
+	size = be32_to_cpu(fdtp->totalsize);
 
 	/* Before we do anything, lets reserve the dt blob */
 	reserve_bootmem(base, size, BOOTMEM_DEFAULT);
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
index 76a7131e486e..6d981bb337ec 100644
--- a/arch/mips/netlogic/xlp/setup.c
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -98,7 +98,7 @@ void __init plat_mem_setup(void)
 	pm_power_off	= nlm_linux_exit;
 
 	/* memory and bootargs from DT */
-	early_init_devtree(initial_boot_params);
+	xlp_early_init_devtree();
 
 	if (boot_mem_map.nr_map == 0) {
 		pr_info("Using DRAM BARs for memory map.\n");
-- 
cgit v1.2.3


From 7f15a256b556bf26780d7a0bd03c88914a852022 Mon Sep 17 00:00:00 2001
From: Michal Simek
Date: Wed, 6 Nov 2013 16:36:08 +0100
Subject: microblaze: Calculate kernel pad automatically

The kernel needs to setup the first two tlbs with pad
which is used for early page allocation which is used
by mapin_ram() to allocate tables for lowmem memory
before memory initialisation is done.
Calculate pad directly from lowmem size.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/Kconfig       | 4 ----
 arch/microblaze/kernel/head.S | 2 +-
 2 files changed, 1 insertion(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index d8ec74b4d1ee..655e1cadf692 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -245,10 +245,6 @@ config MICROBLAZE_64K_PAGES
 
 endchoice
 
-config KERNEL_PAD
-	hex "Kernel PAD for unpacking" if ADVANCED_OPTIONS
-	default "0x80000" if MMU
-
 endmenu
 
 source "mm/Kconfig"
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index fcc797feb9db..817b7eec95b6 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -176,7 +176,7 @@ _invalidate:
 	/* start to do TLB calculation */
 	addik	r12, r0, _end
 	rsub	r12, r3, r12
-	addik	r12, r12, CONFIG_KERNEL_PAD /* that's the pad */
+	addik	r12, r12, CONFIG_LOWMEM_SIZE >> PTE_SHIFT /* that's the pad */
 
 	or r9, r0, r0 /* TLB0 = 0 */
 	or r10, r0, r0 /* TLB1 = 0 */
-- 
cgit v1.2.3


From 522e66464467543c0d88d023336eec4df03ad40b Mon Sep 17 00:00:00 2001
From: Fenghua Yu
Date: Wed, 23 Oct 2013 18:30:12 -0700
Subject: x86/apic: Disable I/O APIC before shutdown of the local APIC

In reboot and crash path, when we shut down the local APIC, the I/O APIC is
still active. This may cause issues because external interrupts
can still come in and disturb the local APIC during shutdown process.

To quiet external interrupts, disable I/O APIC before shutdown local APIC.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1382578212-4677-1-git-send-email-fenghua.yu@intel.com
Cc: <stable@kernel.org>
[ I suppose the 'issue' is a hang during shutdown. It's a fine change nevertheless. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/crash.c  | 2 +-
 arch/x86/kernel/reboot.c | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index e0e0841eef45..18677a90d6a3 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -127,12 +127,12 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
 	cpu_emergency_vmxoff();
 	cpu_emergency_svm_disable();
 
-	lapic_shutdown();
 #ifdef CONFIG_X86_IO_APIC
 	/* Prevent crash_kexec() from deadlocking on ioapic_lock. */
 	ioapic_zap_locks();
 	disable_IO_APIC();
 #endif
+	lapic_shutdown();
 #ifdef CONFIG_HPET_TIMER
 	hpet_disable();
 #endif
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 7e920bff99a3..618ce264b237 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -550,6 +550,10 @@ static void native_machine_emergency_restart(void)
 void native_machine_shutdown(void)
 {
 	/* Stop the cpus and apics */
+#ifdef CONFIG_X86_IO_APIC
+	disable_IO_APIC();
+#endif
+
 #ifdef CONFIG_SMP
 	/*
 	 * Stop all of the others. Also disable the local irq to
@@ -562,10 +566,6 @@ void native_machine_shutdown(void)
 
 	lapic_shutdown();
 
-#ifdef CONFIG_X86_IO_APIC
-	disable_IO_APIC();
-#endif
-
 #ifdef CONFIG_HPET_TIMER
 	hpet_disable();
 #endif
-- 
cgit v1.2.3


From 5702941eec32cfd7b8cf9e36a0936e48170011a4 Mon Sep 17 00:00:00 2001
From: Axel Lin
Date: Fri, 5 Jul 2013 00:31:36 +0800
Subject: irqchip: bcm2835: Convert to use IRQCHIP_DECLARE macro

This patch converts irq-bcm2835 driver to use the new IRQCHIP_DECLARE and
irqchip_init.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: Simon Arlott <simon@fire.lp0.eu>
Cc: Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/arm/mach-bcm2835/bcm2835.c |  5 ++---
 drivers/irqchip/irq-bcm2835.c   | 22 ++++++++++------------
 include/linux/irqchip/bcm2835.h | 29 -----------------------------
 3 files changed, 12 insertions(+), 44 deletions(-)
 delete mode 100644 include/linux/irqchip/bcm2835.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c
index 40686d7ef500..a4abd851905a 100644
--- a/arch/arm/mach-bcm2835/bcm2835.c
+++ b/arch/arm/mach-bcm2835/bcm2835.c
@@ -14,7 +14,7 @@
 
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/irqchip/bcm2835.h>
+#include <linux/irqchip.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/clk/bcm2835.h>
@@ -131,8 +131,7 @@ static const char * const bcm2835_compat[] = {
 
 DT_MACHINE_START(BCM2835, "BCM2835")
 	.map_io = bcm2835_map_io,
-	.init_irq = bcm2835_init_irq,
-	.handle_irq = bcm2835_handle_irq,
+	.init_irq = irqchip_init,
 	.init_machine = bcm2835_init,
 	.init_time = clocksource_of_init,
 	.restart = bcm2835_restart,
diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c
index 16c78f1c5ef2..1693b8e7f26a 100644
--- a/drivers/irqchip/irq-bcm2835.c
+++ b/drivers/irqchip/irq-bcm2835.c
@@ -49,9 +49,11 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/irqdomain.h>
-#include <linux/irqchip/bcm2835.h>
 
 #include <asm/exception.h>
+#include <asm/mach/irq.h>
+
+#include "irqchip.h"
 
 /* Put the bank and irq (32 bits) into the hwirq */
 #define MAKE_HWIRQ(b, n)	((b << 5) | (n))
@@ -93,6 +95,8 @@ struct armctrl_ic {
 };
 
 static struct armctrl_ic intc __read_mostly;
+static asmlinkage void __exception_irq_entry bcm2835_handle_irq(
+	struct pt_regs *regs);
 
 static void armctrl_mask_irq(struct irq_data *d)
 {
@@ -164,17 +168,9 @@ static int __init armctrl_of_init(struct device_node *node,
 			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 		}
 	}
-	return 0;
-}
-
-static struct of_device_id irq_of_match[] __initconst = {
-	{ .compatible = "brcm,bcm2835-armctrl-ic", .data = armctrl_of_init },
-	{ }
-};
 
-void __init bcm2835_init_irq(void)
-{
-	of_irq_init(irq_of_match);
+	set_handle_irq(bcm2835_handle_irq);
+	return 0;
 }
 
 /*
@@ -200,7 +196,7 @@ static void armctrl_handle_shortcut(int bank, struct pt_regs *regs,
 	handle_IRQ(irq_linear_revmap(intc.domain, irq), regs);
 }
 
-asmlinkage void __exception_irq_entry bcm2835_handle_irq(
+static asmlinkage void __exception_irq_entry bcm2835_handle_irq(
 	struct pt_regs *regs)
 {
 	u32 stat, irq;
@@ -222,3 +218,5 @@ asmlinkage void __exception_irq_entry bcm2835_handle_irq(
 		}
 	}
 }
+
+IRQCHIP_DECLARE(bcm2835_armctrl_ic, "brcm,bcm2835-armctrl-ic", armctrl_of_init);
diff --git a/include/linux/irqchip/bcm2835.h b/include/linux/irqchip/bcm2835.h
deleted file mode 100644
index 48a859bc9dca..000000000000
--- a/include/linux/irqchip/bcm2835.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2010 Broadcom
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __LINUX_IRQCHIP_BCM2835_H_
-#define __LINUX_IRQCHIP_BCM2835_H_
-
-#include <asm/exception.h>
-
-extern void bcm2835_init_irq(void);
-
-extern asmlinkage void __exception_irq_entry bcm2835_handle_irq(
-	struct pt_regs *regs);
-
-#endif
-- 
cgit v1.2.3


From aeeca404266c8ed2997905afc342ba9561f49ca7 Mon Sep 17 00:00:00 2001
From: Paul Gortmaker
Date: Thu, 7 Nov 2013 13:34:50 -0500
Subject: x86, intel-mid: Do not re-introduce usage of obsolete __cpuinit

The commit 712b6aa8731a7e148298c58cea66a5209c659e3c [Nov7 linux-next
via tip/auto-latest] ("intel_mid: Renamed *mrst* to *intel_mid*")
adds a __cpuinit.

We removed this a couple versions ago; we now want to remove
the compat no-op stubs.  Introducing new users is not what
we want to see at this point in time, as it will break once
the stubs are gone.

Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Link: http://lkml.kernel.org/r/1383849290-11250-1-git-send-email-paul.gortmaker@windriver.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/platform/intel-mid/intel-mid.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 523a1c8f7f07..f90e290f689f 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -123,7 +123,7 @@ static void __init intel_mid_time_init(void)
 	apbt_time_init();
 }
 
-static void __cpuinit intel_mid_arch_setup(void)
+static void intel_mid_arch_setup(void)
 {
 	if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
 		__intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_PENWELL;
-- 
cgit v1.2.3


From 51387306b5c2b0c9eb1e2556de1b37267bb2b583 Mon Sep 17 00:00:00 2001
From: Dan Carpenter
Date: Fri, 8 Nov 2013 12:45:33 +0300
Subject: metag: off by one in setup_bootmem_node()

If "nid == MAX_NUMNODES" then we write beyond the end of the node_data[]
array.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
---
 arch/metag/mm/numa.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/metag/mm/numa.c b/arch/metag/mm/numa.c
index 9ae578c9b620..b172aa45fcf8 100644
--- a/arch/metag/mm/numa.c
+++ b/arch/metag/mm/numa.c
@@ -34,7 +34,7 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 	unsigned long pgdat_paddr;
 
 	/* Don't allow bogus node assignment */
-	BUG_ON(nid > MAX_NUMNODES || nid <= 0);
+	BUG_ON(nid >= MAX_NUMNODES || nid <= 0);
 
 	start_pfn = start >> PAGE_SHIFT;
 	end_pfn = end >> PAGE_SHIFT;
-- 
cgit v1.2.3


From db2a7df0343a0fb166d369e58bcfe605162dc857 Mon Sep 17 00:00:00 2001
From: Michal Simek
Date: Tue, 20 Aug 2013 16:45:36 +0200
Subject: microblaze: Remove deprecated IRQF_DISABLED

Removed IRQF_DISABLED as it's no-op and should be removed.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/kernel/timer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index e4b3f33ef34c..d7abb71abf61 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -148,7 +148,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction timer_irqaction = {
 	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED | IRQF_TIMER,
+	.flags = IRQF_TIMER,
 	.name = "timer",
 	.dev_id = &clockevent_xilinx_timer,
 };
-- 
cgit v1.2.3


From 176195e757df0044623b2086527ad5b5cfde9488 Mon Sep 17 00:00:00 2001
From: Michal Simek
Date: Mon, 16 Sep 2013 07:45:29 +0200
Subject: microblaze: Use predefined SYSCALL_DEFINE macro

Use standard syscall definition.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/kernel/sys_microblaze.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index f905b3ae68c7..e80a6c02ac31 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -33,9 +33,9 @@
 #include <linux/slab.h>
 #include <asm/syscalls.h>
 
-asmlinkage long sys_mmap(unsigned long addr, unsigned long len,
-			unsigned long prot, unsigned long flags,
-			unsigned long fd, off_t pgoff)
+SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
+		unsigned long, prot, unsigned long, flags, unsigned long, fd,
+		off_t, pgoff)
 {
 	if (pgoff & ~PAGE_MASK)
 		return -EINVAL;
-- 
cgit v1.2.3


From 99399545d62533b4ae742190b5c6b11f7a5826d9 Mon Sep 17 00:00:00 2001
From: Michal Simek
Date: Mon, 16 Sep 2013 07:46:23 +0200
Subject: microblaze: Fix bug with mmap2 syscall MB implementation

Fix mmap2 behaviour which incorrectly works with pgoff
not in 4k units.

Reported-by: Rich Felker <dalias@aerifal.cx>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/kernel/sys_microblaze.c | 11 +++++++++++
 arch/microblaze/kernel/syscall_table.S  |  2 +-
 2 files changed, 12 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index e80a6c02ac31..f1e1f666ddde 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -42,3 +42,14 @@ SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
 
 	return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT);
 }
+
+SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len,
+		unsigned long, prot, unsigned long, flags, unsigned long, fd,
+		unsigned long, pgoff)
+{
+	if (pgoff & (~PAGE_MASK >> 12))
+		return -EINVAL;
+
+	return sys_mmap_pgoff(addr, len, prot, flags, fd,
+			      pgoff >> (PAGE_SHIFT - 12));
+}
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 4fca56cf02f6..b882ad50535b 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -192,7 +192,7 @@ ENTRY(sys_call_table)
 	.long sys_ni_syscall		/* reserved for streams2 */
 	.long sys_vfork		/* 190 */
 	.long sys_getrlimit
-	.long sys_mmap_pgoff		/* mmap2 */
+	.long sys_mmap2
 	.long sys_truncate64
 	.long sys_ftruncate64
 	.long sys_stat64		/* 195 */
-- 
cgit v1.2.3


From 63d7bd1b171d5e7190c50dd3e48b1c561d7803d8 Mon Sep 17 00:00:00 2001
From: Michal Simek
Date: Fri, 14 Jun 2013 09:53:53 +0200
Subject: microblaze: Remove incorrect file path

Trivial.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/boot/dts/Makefile | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/boot/dts/Makefile b/arch/microblaze/boot/dts/Makefile
index c3b3a5d67b89..c4982d16e555 100644
--- a/arch/microblaze/boot/dts/Makefile
+++ b/arch/microblaze/boot/dts/Makefile
@@ -1,6 +1,4 @@
 #
-# arch/microblaze/boot/Makefile
-#
 
 obj-y += linked_dtb.o
 
-- 
cgit v1.2.3


From c11eede69b6ad0ac44ebc1e021a8d2699c5f1f8f Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Sun, 10 Nov 2013 23:19:08 -0600
Subject: powerpc: add missing explicit OF includes for ppc

Commit b5b4bb3f6a11f9 (of: only include prom.h on sparc) removed implicit
includes of of_*.h headers by powerpc's prom.h. Some components were
missed in initial clean-up patch, so add the necessary includes to fix
powerpc builds.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-ide@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
---
 arch/powerpc/platforms/85xx/ppa8548.c     | 1 +
 arch/powerpc/platforms/85xx/sgy_cts1000.c | 1 +
 arch/powerpc/platforms/85xx/smp.c         | 1 +
 arch/powerpc/sysdev/ehv_pic.c             | 1 +
 arch/powerpc/sysdev/ppc4xx_ocm.c          | 1 +
 arch/powerpc/sysdev/xilinx_intc.c         | 1 +
 drivers/ata/sata_dwc_460ex.c              | 2 ++
 drivers/char/hw_random/ppc4xx-rng.c       | 1 +
 drivers/clk/clk-ppc-corenet.c             | 1 +
 drivers/crypto/amcc/crypto4xx_core.c      | 3 +++
 drivers/dma/ppc4xx/adma.c                 | 2 ++
 drivers/mtd/nand/socrates_nand.c          | 1 +
 drivers/pcmcia/m8xx_pcmcia.c              | 2 ++
 drivers/spi/spi-ppc4xx.c                  | 2 ++
 drivers/watchdog/pika_wdt.c               | 1 +
 15 files changed, 21 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/85xx/ppa8548.c b/arch/powerpc/platforms/85xx/ppa8548.c
index 6a7704b92c3b..3daff7c63569 100644
--- a/arch/powerpc/platforms/85xx/ppa8548.c
+++ b/arch/powerpc/platforms/85xx/ppa8548.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/reboot.h>
 #include <linux/seq_file.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 
 #include <asm/machdep.h>
diff --git a/arch/powerpc/platforms/85xx/sgy_cts1000.c b/arch/powerpc/platforms/85xx/sgy_cts1000.c
index 7179726ba5c5..b9197cea1854 100644
--- a/arch/powerpc/platforms/85xx/sgy_cts1000.c
+++ b/arch/powerpc/platforms/85xx/sgy_cts1000.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/of_gpio.h>
+#include <linux/of_irq.h>
 #include <linux/workqueue.h>
 #include <linux/reboot.h>
 #include <linux/interrupt.h>
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 281b7f01df63..393f975ab397 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/kexec.h>
 #include <linux/highmem.h>
 #include <linux/cpu.h>
diff --git a/arch/powerpc/sysdev/ehv_pic.c b/arch/powerpc/sysdev/ehv_pic.c
index 9cd0e60716fe..b74085cea1af 100644
--- a/arch/powerpc/sysdev/ehv_pic.c
+++ b/arch/powerpc/sysdev/ehv_pic.c
@@ -19,6 +19,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/arch/powerpc/sysdev/ppc4xx_ocm.c b/arch/powerpc/sysdev/ppc4xx_ocm.c
index 1b15f93479c3..b7c43453236d 100644
--- a/arch/powerpc/sysdev/ppc4xx_ocm.c
+++ b/arch/powerpc/sysdev/ppc4xx_ocm.c
@@ -26,6 +26,7 @@
 #include <linux/kernel.h>
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <asm/rheap.h>
 #include <asm/ppc4xx_ocm.h>
 #include <linux/slab.h>
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index f4fdc94ad2c0..83f943a8e0db 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -24,6 +24,7 @@
 #include <linux/irq.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/i8259.h>
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index 2e391730e8be..523524b68022 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -31,6 +31,8 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/libata.h>
diff --git a/drivers/char/hw_random/ppc4xx-rng.c b/drivers/char/hw_random/ppc4xx-rng.c
index 732c330805fd..521f76b0934b 100644
--- a/drivers/char/hw_random/ppc4xx-rng.c
+++ b/drivers/char/hw_random/ppc4xx-rng.c
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/hw_random.h>
 #include <linux/delay.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <asm/io.h>
 
diff --git a/drivers/clk/clk-ppc-corenet.c b/drivers/clk/clk-ppc-corenet.c
index e9587073bd32..c4f76ed914b0 100644
--- a/drivers/clk/clk-ppc-corenet.c
+++ b/drivers/clk/clk-ppc-corenet.c
@@ -11,6 +11,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/of.h>
 #include <linux/slab.h>
diff --git a/drivers/crypto/amcc/crypto4xx_core.c b/drivers/crypto/amcc/crypto4xx_core.c
index f88e3d8f6b64..efaf6302405f 100644
--- a/drivers/crypto/amcc/crypto4xx_core.c
+++ b/drivers/crypto/amcc/crypto4xx_core.c
@@ -27,6 +27,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
 #include <asm/dcr.h>
diff --git a/drivers/dma/ppc4xx/adma.c b/drivers/dma/ppc4xx/adma.c
index 370ff8265630..e24b5ef486b5 100644
--- a/drivers/dma/ppc4xx/adma.c
+++ b/drivers/dma/ppc4xx/adma.c
@@ -42,6 +42,8 @@
 #include <linux/uaccess.h>
 #include <linux/proc_fs.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <asm/dcr.h>
 #include <asm/dcr-regs.h>
diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c
index 09dde7d27178..49bd9155cb19 100644
--- a/drivers/mtd/nand/socrates_nand.c
+++ b/drivers/mtd/nand/socrates_nand.c
@@ -15,6 +15,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/io.h>
 
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 18c0d8d1ddf7..182034d2ef58 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -48,7 +48,9 @@
 #include <linux/interrupt.h>
 #include <linux/fsl_devices.h>
 #include <linux/bitops.h>
+#include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
 #include <asm/io.h>
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index 0ee53c25ba58..19d615bd5d67 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -29,6 +29,8 @@
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/wait.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
 #include <linux/interrupt.h>
diff --git a/drivers/watchdog/pika_wdt.c b/drivers/watchdog/pika_wdt.c
index 7d3d471f810c..329bc60ad7a2 100644
--- a/drivers/watchdog/pika_wdt.c
+++ b/drivers/watchdog/pika_wdt.c
@@ -22,6 +22,7 @@
 #include <linux/bitops.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 
 #define DRV_NAME "PIKA-WDT"
-- 
cgit v1.2.3


From b5dfcb09debc38582c3cb72a3c1a88b919b07f2d Mon Sep 17 00:00:00 2001
From: Ingo Molnar
Date: Mon, 11 Nov 2013 19:53:42 +0100
Subject: Revert "x86/UV: Add uvtrace support"

This reverts commit 8eba18428ac926f436064ac281e76d36d51bd631.

uv_trace() is not used by anything, nor is uv_trace_nmi_func, nor
uv_trace_func.

That's not how we do instrumentation code in the kernel: we add
tracepoints, printk()s, etc. so that everyone not just those with
magic kernel modules can debug a system.

So remove this unused (and misguied) piece of code.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mike Travis <travis@sgi.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Hedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/n/tip-tumfBffmr4jmnt8Gyxanoblg@git.kernel.org
---
 arch/x86/include/asm/uv/uv.h  |  8 --------
 arch/x86/platform/uv/uv_nmi.c | 13 +------------
 2 files changed, 1 insertion(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uv/uv.h b/arch/x86/include/asm/uv/uv.h
index 8b1283daa332..6b964a0b86d1 100644
--- a/arch/x86/include/asm/uv/uv.h
+++ b/arch/x86/include/asm/uv/uv.h
@@ -14,13 +14,6 @@ extern void uv_cpu_init(void);
 extern void uv_nmi_init(void);
 extern void uv_register_nmi_notifier(void);
 extern void uv_system_init(void);
-extern void (*uv_trace_nmi_func)(unsigned int reason, struct pt_regs *regs);
-extern void (*uv_trace_func)(const char *f, const int l, const char *fmt, ...);
-#define uv_trace(fmt, ...)						\
-do {									\
-	if (unlikely(uv_trace_func))					\
-		(uv_trace_func)(__func__, __LINE__, fmt, ##__VA_ARGS__);\
-} while (0)
 extern const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 						 struct mm_struct *mm,
 						 unsigned long start,
@@ -33,7 +26,6 @@ static inline enum uv_system_type get_uv_system_type(void) { return UV_NONE; }
 static inline int is_uv_system(void)	{ return 0; }
 static inline void uv_cpu_init(void)	{ }
 static inline void uv_system_init(void)	{ }
-static inline void uv_trace(void *fmt, ...)	{ }
 static inline void uv_register_nmi_notifier(void) { }
 static inline const struct cpumask *
 uv_flush_tlb_others(const struct cpumask *cpumask, struct mm_struct *mm,
diff --git a/arch/x86/platform/uv/uv_nmi.c b/arch/x86/platform/uv/uv_nmi.c
index 9b8ac60ad8db..2e863ad4a772 100644
--- a/arch/x86/platform/uv/uv_nmi.c
+++ b/arch/x86/platform/uv/uv_nmi.c
@@ -1,5 +1,5 @@
 /*
- * SGI NMI/TRACE support routines
+ * SGI NMI support routines
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -39,13 +39,6 @@
 #include <asm/uv/uv_hub.h>
 #include <asm/uv/uv_mmrs.h>
 
-void (*uv_trace_func)(const char *f, const int l, const char *fmt, ...);
-EXPORT_SYMBOL(uv_trace_func);
-
-void (*uv_trace_nmi_func)(unsigned int reason, struct pt_regs *regs);
-EXPORT_SYMBOL(uv_trace_nmi_func);
-
-
 /*
  * UV handler for NMI
  *
@@ -599,10 +592,6 @@ int uv_handle_nmi(unsigned int reason, struct pt_regs *regs)
 		return NMI_DONE;
 	}
 
-	/* Call possible NMI trace function */
-	if (unlikely(uv_trace_nmi_func))
-		(uv_trace_nmi_func)(reason, regs);
-
 	/* Indicate we are the first CPU into the NMI handler */
 	master = (atomic_read(&uv_nmi_cpu) == cpu);
 
-- 
cgit v1.2.3


From 30e3488cbfe6e8af0832be715081c49b08299b73 Mon Sep 17 00:00:00 2001
From: Wei Yongjun
Date: Fri, 25 Oct 2013 17:31:51 +0800
Subject: ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init()

In case of error, the function platform_device_register_resndata()
returns ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/gpmc-smsc911x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index ef990118d32b..2757504a13c4 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -83,7 +83,7 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg)
 	pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id,
 		 gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources),
 		 &gpmc_smsc911x_config, sizeof(gpmc_smsc911x_config));
-	if (!pdev) {
+	if (IS_ERR(pdev)) {
 		pr_err("Unable to register platform device\n");
 		gpio_free(gpmc_cfg->gpio_reset);
 		goto free2;
-- 
cgit v1.2.3


From c27f2de754a1412ce4a6c4af723605f776ec4ac2 Mon Sep 17 00:00:00 2001
From: Wei Yongjun
Date: Wed, 30 Oct 2013 13:23:21 +0800
Subject: ARM: OMAP3: Beagle: fix return value check in beagle_opp_init()

In case of error, the function get_cpu_device() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3beagle.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 8b9cd0690ce7..09f6149b59a9 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -510,7 +510,7 @@ static int __init beagle_opp_init(void)
 		mpu_dev = get_cpu_device(0);
 		iva_dev = omap_device_get_by_hwmod_name("iva");
 
-		if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) {
+		if (!mpu_dev || IS_ERR(iva_dev)) {
 			pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
 				__func__, mpu_dev, iva_dev);
 			return -ENODEV;
-- 
cgit v1.2.3


From 3522bf7bfa248b99eafa2f4872190699a808c7d9 Mon Sep 17 00:00:00 2001
From: Nishanth Menon
Date: Thu, 14 Nov 2013 11:05:16 -0600
Subject: ARM: OMAP2+: omap_device: maintain sane runtime pm status around
 suspend/resume

OMAP device hooks around suspend|resume_noirq ensures that hwmod
devices are forced to idle using omap_device_idle/enable as part of
the last stage of suspend activity.

For a device such as i2c who uses autosuspend, it is possible to enter
the suspend path with dev->power.runtime_status = RPM_ACTIVE.

As part of the suspend flow, the generic runtime logic would increment
it's dev->power.disable_depth to 1. This should prevent further
pm_runtime_get_sync from succeeding once the runtime_status has been
set to RPM_SUSPENDED.

Now, as part of the suspend_noirq handler in omap_device, we force the
following: if the device status is !suspended, we force the device
to idle using omap_device_idle (clocks are cut etc..). This ensures
that from a hardware perspective, the device is "suspended". However,
runtime_status is left to be active.

*if* an operation is attempted after this point to
pm_runtime_get_sync, runtime framework depends on runtime_status to
indicate accurately the device status, and since it sees it to be
ACTIVE, it assumes the module is functional and returns a non-error
value. As a result the user will see pm_runtime_get succeed, however a
register access will crash due to the lack of clocks.

To prevent this from happening, we should ensure that runtime_status
exactly indicates the device status. As a result of this change
any further calls to pm_runtime_get* would return -EACCES (since
disable_depth is 1). On resume, we restore the clocks and runtime
status exactly as we suspended with. These operations are not expected
to fail as we update the states after the core runtime framework has
suspended itself and restore before the core runtime framework has
resumed.

Cc: stable@vger.kernel.org # v3.4+
Reported-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_device.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index b69dd9abb50a..53f0735817bb 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -621,6 +621,7 @@ static int _od_suspend_noirq(struct device *dev)
 
 	if (!ret && !pm_runtime_status_suspended(dev)) {
 		if (pm_generic_runtime_suspend(dev) == 0) {
+			pm_runtime_set_suspended(dev);
 			omap_device_idle(pdev);
 			od->flags |= OMAP_DEVICE_SUSPENDED;
 		}
@@ -634,10 +635,18 @@ static int _od_resume_noirq(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_device *od = to_omap_device(pdev);
 
-	if ((od->flags & OMAP_DEVICE_SUSPENDED) &&
-	    !pm_runtime_status_suspended(dev)) {
+	if (od->flags & OMAP_DEVICE_SUSPENDED) {
 		od->flags &= ~OMAP_DEVICE_SUSPENDED;
 		omap_device_enable(pdev);
+		/*
+		 * XXX: we run before core runtime pm has resumed itself. At
+		 * this point in time, we just restore the runtime pm state and
+		 * considering symmetric operations in resume, we donot expect
+		 * to fail. If we failed, something changed in core runtime_pm
+		 * framework OR some device driver messed things up, hence, WARN
+		 */
+		WARN(pm_runtime_set_active(dev),
+		     "Could not set %s runtime state active\n", dev_name(dev));
 		pm_generic_runtime_resume(dev);
 	}
 
-- 
cgit v1.2.3


From 26273e02a0cf18eb72416559310d3294390a9024 Mon Sep 17 00:00:00 2001
From: Tony Lindgren
Date: Fri, 15 Nov 2013 08:27:29 -0800
Subject: ARM: OMAP2+: Fix build for dra7xx without omap4 and 5

Otherwise we can get errors like:

arch/arm/mach-omap2/prm44xx.c:274: error: redefinition of ‘omap44xx_prm_reconfigure_io_chain’
arch/arm/mach-omap2/built-in.o: In function `default_finish_suspend':
arch/arm/mach-omap2/omap-mpuss-lowpower.c:95: undefined reference to `omap_do_wfi'

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Makefile       | 2 +-
 arch/arm/mach-omap2/prm44xx_54xx.h | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index e15ac005ef17..1f25f3e99c05 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -40,7 +40,7 @@ omap-4-5-common				=  omap4-common.o omap-wakeupgen.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-common) $(smp-y) sleep44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= $(omap-4-5-common) $(smp-y) sleep44xx.o
 obj-$(CONFIG_SOC_AM43XX)		+= $(omap-4-5-common)
-obj-$(CONFIG_SOC_DRA7XX)		+= $(omap-4-5-common) $(smp-y)
+obj-$(CONFIG_SOC_DRA7XX)		+= $(omap-4-5-common) $(smp-y) sleep44xx.o
 
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a$(plus_sec)
diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h
index a085d9cc1f5d..7a976065e138 100644
--- a/arch/arm/mach-omap2/prm44xx_54xx.h
+++ b/arch/arm/mach-omap2/prm44xx_54xx.h
@@ -42,7 +42,8 @@ extern u32 omap4_prm_vcvp_read(u8 offset);
 extern void omap4_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+	defined(CONFIG_SOC_DRA7XX)
 void omap44xx_prm_reconfigure_io_chain(void);
 #else
 static inline void omap44xx_prm_reconfigure_io_chain(void)
-- 
cgit v1.2.3