From 846e1913f5ccf3fb822a7aa166e5a840c8bdc61b Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Sat, 12 Aug 2017 19:49:31 -0700 Subject: MIPS: CPS: Use change_*, set_* & clear_* where appropriate Make use of the new change_*, set_* & clear_* accessor functions for CPS (CM, CPC & GIC) registers where doing so makes the code easier to read or shortens it without adversely affecting readability. Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17005/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/mips-cm.c | 4 +--- arch/mips/kernel/smp-cps.c | 6 ++---- arch/mips/mm/sc-mips.c | 19 +++++-------------- 3 files changed, 8 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c index 91b861ebc907..497dbb128438 100644 --- a/arch/mips/kernel/mips-cm.c +++ b/arch/mips/kernel/mips-cm.c @@ -233,9 +233,7 @@ int mips_cm_probe(void) } /* set default target to memory */ - base_reg &= ~CM_GCR_BASE_CMDEFTGT; - base_reg |= CM_GCR_BASE_CMDEFTGT_MEM; - write_gcr_base(base_reg); + change_gcr_base(CM_GCR_BASE_CMDEFTGT, CM_GCR_BASE_CMDEFTGT_MEM); /* disable CM regions */ write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR); diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c index 777e0193e8ed..5729d2c77461 100644 --- a/arch/mips/kernel/smp-cps.c +++ b/arch/mips/kernel/smp-cps.c @@ -212,7 +212,7 @@ err_out: static void boot_core(unsigned int core, unsigned int vpe_id) { - u32 access, stat, seq_state; + u32 stat, seq_state; unsigned timeout; /* Select the appropriate core */ @@ -228,9 +228,7 @@ static void boot_core(unsigned int core, unsigned int vpe_id) write_gcr_co_reset_ext_base(CM_GCR_Cx_RESET_EXT_BASE_UEB); /* Ensure the core can access the GCRs */ - access = read_gcr_access(); - access |= 1 << core; - write_gcr_access(access); + set_gcr_access(1 << core); if (mips_cpc_present()) { /* Reset the core */ diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c index 7f30397cb10d..cda878c0010b 100644 --- a/arch/mips/mm/sc-mips.c +++ b/arch/mips/mm/sc-mips.c @@ -69,28 +69,19 @@ static void mips_sc_prefetch_enable(void) pftctl |= CM_GCR_L2_PFT_CONTROL_PFTEN; write_gcr_l2_pft_control(pftctl); - pftctl = read_gcr_l2_pft_control_b(); - pftctl |= CM_GCR_L2_PFT_CONTROL_B_PORTID; - pftctl |= CM_GCR_L2_PFT_CONTROL_B_CEN; - write_gcr_l2_pft_control_b(pftctl); + set_gcr_l2_pft_control_b(CM_GCR_L2_PFT_CONTROL_B_PORTID | + CM_GCR_L2_PFT_CONTROL_B_CEN); } } static void mips_sc_prefetch_disable(void) { - unsigned long pftctl; - if (mips_cm_revision() < CM_REV_CM2_5) return; - pftctl = read_gcr_l2_pft_control(); - pftctl &= ~CM_GCR_L2_PFT_CONTROL_PFTEN; - write_gcr_l2_pft_control(pftctl); - - pftctl = read_gcr_l2_pft_control_b(); - pftctl &= ~CM_GCR_L2_PFT_CONTROL_B_PORTID; - pftctl &= ~CM_GCR_L2_PFT_CONTROL_B_CEN; - write_gcr_l2_pft_control_b(pftctl); + clear_gcr_l2_pft_control(CM_GCR_L2_PFT_CONTROL_PFTEN); + clear_gcr_l2_pft_control_b(CM_GCR_L2_PFT_CONTROL_B_PORTID | + CM_GCR_L2_PFT_CONTROL_B_CEN); } static bool mips_sc_prefetch_is_enabled(void) -- cgit v1.2.3