From af756bbccff85504ce05c63a50f80b9d7823c500 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 11 Jan 2016 14:35:24 -0800 Subject: ARM: dts: Fix omap5 PMIC control lines for RTC writes The palmas PMIC has two control lines that need to be muxed properly for things to work. The sys_nirq pin is used for interrupts, and msecure pin is used for enabling writes to some PMIC registers. Without these pins configured properly things can fail in mysterious ways. For example, we can't update the RTC registers on palmas PMIC unless the msecure pin is configured. And this is probably the reason why we had RTC missing from the omap5 dts file. According to "OMAP5430 ES2.0 Data Manual [Public] VErsion A (Rev. F)" swps052f.pdf, mux mode 1 is for sys_drm_msecure so in theory there's should be no need to configure it as a GPIO pin. However, it seems there are some reliability issues using the msecure mux mode. And the TI trees configure the msecure pin as GPIO out high instead. As the PMIC only cares that the msecure line is high to allow access to the RTC registers, let's use a GPIO hog as suggested by Nishanth Menon . Also the use of the internal pull was considered but supposedly that may not be capable of keeping the line high in a noisy environment. If we ever see high security omap5 products in the mainline tree, those need to skip the msecure pin muxing and ignore setting the GPIO hog. Chances are the related pin mux registers are locked in that case and the msecure pin is managed by whatever software may be running in the ARM TrustZone. Who knows what the original intention of the msecure pin was. Maybe it was supposed to prevent the system time to be set back for some game demo modes to time out? Anyways, it seems that later PMICs like tps659037 have recycled this pin for "powerhold" and devices like beagle-x15 do not need changes to the msecure pin configuration. To avoid further confusion with TWL variant PMICs, beagle-x15 does not have a back-up battery for RTC palmas. Instead the mcp79410 RTC is used with rtc-ds1307 driver. There is a "powerhold" jumper j5 holes near the palmas PMIC, and shorting it seems to power up beagle-x15 automatically. It is unknown if it also has other side effects to the beagle-x15 power up sequence. Cc: stable@vger.kernel.org # v4.4 Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-board-common.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 5cf76a1c5c75..7de5a7754f1e 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -130,6 +130,16 @@ }; }; +&gpio8 { + /* TI trees use GPIO instead of msecure, see also muxing */ + p234 { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "gpio8_234/msecure"; + }; +}; + &omap5_pmx_core { pinctrl-names = "default"; pinctrl-0 = < @@ -213,6 +223,13 @@ >; }; + /* TI trees use GPIO mode; msecure mode does not work reliably? */ + palmas_msecure_pins: palmas_msecure_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */ + >; + }; + usbhost_pins: pinmux_usbhost_pins { pinctrl-single,pins = < 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ @@ -278,6 +295,12 @@ &usbhost_wkup_pins >; + palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */ + >; + }; + usbhost_wkup_pins: pinmux_usbhost_wkup_pins { pinctrl-single,pins = < 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ @@ -345,6 +368,8 @@ interrupt-controller; #interrupt-cells = <2>; ti,system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>; extcon_usb3: palmas_usb { compatible = "ti,palmas-usb-vid"; -- cgit v1.2.3 From c08659d431b40ad5beb97d7dde49ad9796cb812c Mon Sep 17 00:00:00 2001 From: H. Nikolaus Schaller Date: Tue, 5 Jan 2016 13:01:37 +0100 Subject: ARM: dts: omap5-board-common: enable rtc and charging of backup battery tested on OMP5432 EVM Cc: stable@vger.kernel.org # v4.4 Signed-off-by: H. Nikolaus Schaller Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-board-common.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 7de5a7754f1e..41e80e7f20be 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -383,6 +383,14 @@ #clock-cells = <0>; }; + rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 IRQ_TYPE_NONE>; + ti,backup-battery-chargeable; + ti,backup-battery-charge-high-current; + }; + palmas_pmic { compatible = "ti,palmas-pmic"; interrupt-parent = <&palmas>; -- cgit v1.2.3 From 02f1cc3c1a121c70cdf95e986f7f2fb4323cc5a3 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 11 Jan 2016 15:26:12 -0600 Subject: ARM: omap2plus_defconfig: enable SPLIT and DWARF4 CONFIG_DEBUG_INFO_SPLIT will split debug info on .dwo files. This will generate a smaller vmlinux and smaller .ko modules, which will be easier to ship on certain products. CONFIG_DEBUG_INFO_DWARF4 will generate debug info in DWARF4 format, which ends up being larger, but improves the probability of resolving variables in optmized code. Signed-off-by: Felipe Balbi [tony@atomide.com: this makes initramfs quite a bit smaller] Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c5e1943e5427..0b3e471a4262 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -449,6 +449,8 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_SPLIT=y +CONFIG_DEBUG_INFO_DWARF4=y CONFIG_MAGIC_SYSRQ=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y -- cgit v1.2.3 From 383bf44d1a8b18de5c26ec2a48c6822681b50984 Mon Sep 17 00:00:00 2001 From: Miroslav Benes Date: Thu, 14 Jan 2016 11:35:53 +0100 Subject: livepatch: change the error message in asm/livepatch.h header files If anyone includes asm/livepatch.h when CONFIG_LIVEPATCH=n the build fails with the existing error message. Change it to something saner. [jkosina@suse.cz: fixed changelog typo spotted by Josh] Suggested-by: Andrew Morton Signed-off-by: Miroslav Benes Acked-by: Josh Poimboeuf Signed-off-by: Jiri Kosina --- arch/s390/include/asm/livepatch.h | 2 +- arch/x86/include/asm/livepatch.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/livepatch.h b/arch/s390/include/asm/livepatch.h index 7aa799134a11..a52b6cca873d 100644 --- a/arch/s390/include/asm/livepatch.h +++ b/arch/s390/include/asm/livepatch.h @@ -37,7 +37,7 @@ static inline void klp_arch_set_pc(struct pt_regs *regs, unsigned long ip) regs->psw.addr = ip; } #else -#error Live patching support is disabled; check CONFIG_LIVEPATCH +#error Include linux/livepatch.h, not asm/livepatch.h #endif #endif diff --git a/arch/x86/include/asm/livepatch.h b/arch/x86/include/asm/livepatch.h index 19c099afa861..e795f5274217 100644 --- a/arch/x86/include/asm/livepatch.h +++ b/arch/x86/include/asm/livepatch.h @@ -41,7 +41,7 @@ static inline void klp_arch_set_pc(struct pt_regs *regs, unsigned long ip) regs->ip = ip; } #else -#error Live patching support is disabled; check CONFIG_LIVEPATCH +#error Include linux/livepatch.h, not asm/livepatch.h #endif #endif /* _ASM_X86_LIVEPATCH_H */ -- cgit v1.2.3 From 2800971f731e4491b71f44bf311452ab0f94a062 Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Fri, 17 Jul 2015 16:08:01 -0500 Subject: ARM: dts: AM33xx: Add ti,mbox-send-noirq to wkup_m3 mailbox Add ti,mbox-send-noirq to wkup_m3 mailbox so that messages using wkup_m3 mailbox are sent without triggering any further interrupts. This is needed to achieve lower power numbers during CPU idle on AM33xx. Signed-off-by: Dave Gerlach [s-anna@ti.com: revise commit description] Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index d23e2524d694..ee26e2a9abec 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -399,6 +399,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; mbox_wkupm3: wkup_m3 { + ti,mbox-send-noirq; ti,mbox-tx = <0 0 0>; ti,mbox-rx = <0 0 3>; }; -- cgit v1.2.3 From cf19f3ab89de1c088387ce744b0d4723be35b068 Mon Sep 17 00:00:00 2001 From: Keerthy Date: Fri, 17 Jul 2015 16:08:02 -0500 Subject: ARM: dts: AM4372: Add ti,mbox-send-noirq to wkup_m3 mailbox Add ti,mbox-send-noirq to wkup_m3 mailbox so that messages using wkup_m3 mailbox are sent without triggering any further interrupts. This is required to be able to send multiple messages to the WkupM3 after the mailbox usage logic adjustment in the wkup_m3_ipc driver. Signed-off-by: Keerthy Acked-by: Dave Gerlach [s-anna@ti.com: revise commit description] Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am4372.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index de8791a4d131..ca36b7aef56e 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -249,6 +249,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; mbox_wkupm3: wkup_m3 { + ti,mbox-send-noirq; ti,mbox-tx = <0 0 0>; ti,mbox-rx = <0 0 3>; }; -- cgit v1.2.3 From 4850d43143e72563556b9ba371e26b2b48599321 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Mon, 14 Sep 2015 18:37:12 -0500 Subject: ARM: OMAP2+: Remove legacy mailbox device instantiation The legacy-style mailbox device creation is supported currently only for OMAP3, as all other SoCs are DT-boot only. Even on this SoC, there are no client drivers that utilize these mailbox devices. So, clean up the legacy-style mailbox device instantiation logic. The mailbox devices are already present and supported for the DT boot on OMAP3. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 28 ---------------------------- 1 file changed, 28 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 9374da313e8e..f0f9901d90b0 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include @@ -66,32 +65,6 @@ static int __init omap3_l3_init(void) } omap_postcore_initcall(omap3_l3_init); -#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE) -static inline void __init omap_init_mbox(void) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - struct omap_mbox_pdata *pdata; - - oh = omap_hwmod_lookup("mailbox"); - if (!oh) { - pr_err("%s: unable to find hwmod\n", __func__); - return; - } - if (!oh->dev_attr) { - pr_err("%s: hwmod doesn't have valid attrs\n", __func__); - return; - } - - pdata = (struct omap_mbox_pdata *)oh->dev_attr; - pdev = omap_device_build("omap-mailbox", -1, oh, pdata, sizeof(*pdata)); - WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n", - __func__, PTR_ERR(pdev)); -} -#else -static inline void omap_init_mbox(void) { } -#endif /* CONFIG_OMAP2PLUS_MBOX */ - static inline void omap_init_sti(void) {} #if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE) @@ -246,7 +219,6 @@ static int __init omap2_init_devices(void) omap_init_audio(); /* If dtb is there, the devices will be created dynamically */ if (!of_have_populated_dt()) { - omap_init_mbox(); omap_init_mcspi(); omap_init_sham(); omap_init_aes(); -- cgit v1.2.3 From cbfe74a753e877b49dc54e9b04d5d42230ca0aed Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 8 Jan 2016 12:29:10 +0530 Subject: ARCv2: STAR 9000950267: Handle return from intr to Delay Slot #2 Returning to delay slot, riding an interrupti, had one loose end. AUX_USER_SP used for restoring user mode SP upon RTIE was not being setup from orig task's saved value, causing task to use wrong SP, leading to ProtV errors. The reason being: - INTERRUPT_EPILOGUE returns to a kernel trampoline, thus not expected to restore it - EXCEPTION_EPILOGUE is not used at all Fix that by restoring AUX_USER_SP explicitly in the trampoline. This was broken in the original workaround, but the error scenarios got reduced considerably since v3.14 due to following: 1. The Linuxthreads.old based userspace at the time caused many more exceptions in delay slot than the current NPTL based one. Infact with current userspace the error doesn't happen at all. 2. Return from interrupt (delay slot or otherwise) doesn't get exercised much after commit 4de0e52867d8 ("Really Re-enable interrupts to avoid deadlocks") since IRQ_ACTIVE.active being clear means most returns are as if from pure kernel (even for active interrupts) Infact the issue only happened in an experimental branch where I was tinkering with reverted 4de0e52867d8 Cc: stable@kernel.org # v4.2+ Fixes: 4255b07f2c9c ("ARCv2: STAR 9000793984: Handle return from intr to Delay Slot") Signed-off-by: Vineet Gupta --- arch/arc/kernel/entry-arcv2.S | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S index cbfec79137bf..b17830294706 100644 --- a/arch/arc/kernel/entry-arcv2.S +++ b/arch/arc/kernel/entry-arcv2.S @@ -211,7 +211,11 @@ debug_marker_syscall: ; (since IRQ NOT allowed in DS in ARCv2, this can only happen if orig ; entry was via Exception in DS which got preempted in kernel). ; -; IRQ RTIE won't reliably restore DE bit and/or BTA, needs handling +; IRQ RTIE won't reliably restore DE bit and/or BTA, needs workaround +; +; Solution is return from Intr w/o any delay slot quirks into a kernel trampoline +; and from pure kernel mode return to delay slot which handles DS bit/BTA correctly + .Lintr_ret_to_delay_slot: debug_marker_ds: @@ -222,18 +226,23 @@ debug_marker_ds: ld r2, [sp, PT_ret] ld r3, [sp, PT_status32] + ; STAT32 for Int return created from scratch + ; (No delay dlot, disable Further intr in trampoline) + bic r0, r3, STATUS_U_MASK|STATUS_DE_MASK|STATUS_IE_MASK|STATUS_L_MASK st r0, [sp, PT_status32] mov r1, .Lintr_ret_to_delay_slot_2 st r1, [sp, PT_ret] + ; Orig exception PC/STAT32 safekept @orig_r0 and @event stack slots st r2, [sp, 0] st r3, [sp, 4] b .Lisr_ret_fast_path .Lintr_ret_to_delay_slot_2: + ; Trampoline to restore orig exception PC/STAT32/BTA/AUX_USER_SP sub sp, sp, SZ_PT_REGS st r9, [sp, -4] @@ -243,11 +252,19 @@ debug_marker_ds: ld r9, [sp, 4] sr r9, [erstatus] + ; restore AUX_USER_SP if returning to U mode + bbit0 r9, STATUS_U_BIT, 1f + ld r9, [sp, PT_sp] + sr r9, [AUX_USER_SP] + +1: ld r9, [sp, 8] sr r9, [erbta] ld r9, [sp, -4] add sp, sp, SZ_PT_REGS + + ; return from pure kernel mode to delay slot rtie END(ret_from_exception) -- cgit v1.2.3 From d9db59103305eb5ec2a86369f32063e9921b6ac5 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 14 Jan 2016 12:20:47 -0800 Subject: ARM: OMAP2+: Fix wait_dll_lock_timed for rodata We don't want to be writing to .text so it can be set rodata. Fix error "Unable to handle kernel paging request at virtual address c012396c" in wait_dll_lock_timed if CONFIG_DEBUG_RODATA is selected. As these counters are for debugging only and unused, we can just remove them. Cc: Kees Cook Cc: Laura Abbott Cc: Nishanth Menon Cc: Richard Woodruff Cc: Russell King Cc: Tero Kristo Acked-by: Nicolas Pitre Cc: stable@vger.kernel.org # v4.0+ Fixes: 1e6b48116a95 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/sleep34xx.S | 22 ---------------------- 1 file changed, 22 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index eafd120b53f1..787cfda7a9b3 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -289,12 +289,6 @@ wait_sdrc_ready: bic r5, r5, #0x40 str r5, [r4] -/* - * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a - * base instead. - * Be careful not to clobber r7 when maintaing this code. - */ - is_dll_in_lock_mode: /* Is dll in lock mode? */ ldr r4, sdrc_dlla_ctrl @@ -302,11 +296,7 @@ is_dll_in_lock_mode: tst r5, #0x4 bne exit_nonoff_modes @ Return if locked /* wait till dll locks */ - adr r7, kick_counter wait_dll_lock_timed: - ldr r4, wait_dll_lock_counter - add r4, r4, #1 - str r4, [r7, #wait_dll_lock_counter - kick_counter] ldr r4, sdrc_dlla_status /* Wait 20uS for lock */ mov r6, #8 @@ -330,9 +320,6 @@ kick_dll: orr r6, r6, #(1<<3) @ enable dll str r6, [r4] dsb - ldr r4, kick_counter - add r4, r4, #1 - str r4, [r7] @ kick_counter b wait_dll_lock_timed exit_nonoff_modes: @@ -360,15 +347,6 @@ sdrc_dlla_status: .word SDRC_DLLA_STATUS_V sdrc_dlla_ctrl: .word SDRC_DLLA_CTRL_V - /* - * When exporting to userspace while the counters are in SRAM, - * these 2 words need to be at the end to facilitate retrival! - */ -kick_counter: - .word 0 -wait_dll_lock_counter: - .word 0 - ENTRY(omap3_do_wfi_sz) .word . - omap3_do_wfi -- cgit v1.2.3 From eeaf9646aca89d097861caa24d9818434e48810e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 14 Jan 2016 12:20:47 -0800 Subject: ARM: OMAP2+: Fix l2dis_3630 for rodata We don't want to write to .text section. Let's move l2dis_3630 to .data and access it via a pointer. For calculating the offset, let's optimize out the add and do it in ldr/str as suggested by Nicolas Pitre . Cc: Kees Cook Cc: Laura Abbott Cc: Nishanth Menon Cc: Richard Woodruff Cc: Russell King Cc: Tero Kristo Cc: stable@vger.kernel.org # v4.0+ Acked-by: Nicolas Pitre Cc: stable@vger.kernel.org # v4.0+ Fixes: 1e6b48116a95 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/sleep34xx.S | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 787cfda7a9b3..5659d96b78d5 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -86,8 +86,9 @@ ENTRY(enable_omap3630_toggle_l2_on_restore) stmfd sp!, {lr} @ save registers on stack /* Setup so that we will disable and enable l2 */ mov r1, #0x1 - adrl r2, l2dis_3630 @ may be too distant for plain adr - str r1, [r2] + adrl r3, l2dis_3630_offset @ may be too distant for plain adr + ldr r2, [r3] @ value for offset + str r1, [r2, r3] @ write to l2dis_3630 ldmfd sp!, {pc} @ restore regs and return ENDPROC(enable_omap3630_toggle_l2_on_restore) @@ -415,7 +416,9 @@ ENTRY(omap3_restore) cmp r2, #0x0 @ Check if target power state was OFF or RET bne logic_l1_restore - ldr r0, l2dis_3630 + adr r1, l2dis_3630_offset @ address for offset + ldr r0, [r1] @ value for offset + ldr r0, [r1, r0] @ value at l2dis_3630 cmp r0, #0x1 @ should we disable L2 on 3630? bne skipl2dis mrc p15, 0, r0, c1, c0, 1 @@ -484,7 +487,9 @@ l2_inv_gp: mov r12, #0x2 smc #0 @ Call SMI monitor (smieq) logic_l1_restore: - ldr r1, l2dis_3630 + adr r0, l2dis_3630_offset @ adress for offset + ldr r1, [r0] @ value for offset + ldr r1, [r0, r1] @ value at l2dis_3630 cmp r1, #0x1 @ Test if L2 re-enable needed on 3630 bne skipl2reen mrc p15, 0, r1, c1, c0, 1 @@ -513,6 +518,10 @@ control_stat: .word CONTROL_STAT control_mem_rta: .word CONTROL_MEM_RTA_CTRL +l2dis_3630_offset: + .long l2dis_3630 - . + + .data l2dis_3630: .word 0 -- cgit v1.2.3 From a5311d4d13df80bd71a9e47f9ecaf327f478fab1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 14 Jan 2016 12:20:47 -0800 Subject: ARM: OMAP2+: Fix save_secure_ram_context for rodata We don't want to write to .text and we can move save_secure_ram_context into .data as it all gets copied into SRAM anyways. Cc: Kees Cook Cc: Laura Abbott Cc: Nishanth Menon Cc: Richard Woodruff Cc: Russell King Cc: Sergei Shtylyov Cc: Tero Kristo Acked-by: Nicolas Pitre Cc: stable@vger.kernel.org # v4.0+ Fixes: 1e6b48116a95 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/sleep34xx.S | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 5659d96b78d5..8e2a7acb823b 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -92,8 +92,12 @@ ENTRY(enable_omap3630_toggle_l2_on_restore) ldmfd sp!, {pc} @ restore regs and return ENDPROC(enable_omap3630_toggle_l2_on_restore) - .text -/* Function to call rom code to save secure ram context */ +/* + * Function to call rom code to save secure ram context. This gets + * relocated to SRAM, so it can be all in .data section. Otherwise + * we need to initialize api_params separately. + */ + .data .align 3 ENTRY(save_secure_ram_context) stmfd sp!, {r4 - r11, lr} @ save registers on stack @@ -127,6 +131,8 @@ ENDPROC(save_secure_ram_context) ENTRY(save_secure_ram_context_sz) .word . - save_secure_ram_context + .text + /* * ====================== * == Idle entry point == -- cgit v1.2.3 From 0a0b13275558c32bbf6241464a7244b1ffd5afb3 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 14 Jan 2016 12:20:47 -0800 Subject: ARM: OMAP2+: Fix l2_inv_api_params for rodata We don't want to write to .text, so let's move l2_inv_api_params to .data and access it via a pointer. Cc: Kees Cook Cc: Laura Abbott Cc: Nishanth Menon Cc: Richard Woodruff Cc: Russell King Cc: Tero Kristo Acked-by: Nicolas Pitre Cc: stable@vger.kernel.org # v4.0+ Fixes: 1e6b48116a95 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/sleep34xx.S | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 8e2a7acb823b..1b9f0520dea9 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -436,12 +436,14 @@ skipl2dis: and r1, #0x700 cmp r1, #0x300 beq l2_inv_gp + adr r0, l2_inv_api_params_offset + ldr r3, [r0] + add r3, r3, r0 @ r3 points to dummy parameters mov r0, #40 @ set service ID for PPA mov r12, r0 @ copy secure Service ID in r12 mov r1, #0 @ set task id for ROM code in r1 mov r2, #4 @ set some flags in r2, r6 mov r6, #0xff - adr r3, l2_inv_api_params @ r3 points to dummy parameters dsb @ data write barrier dmb @ data memory barrier smc #1 @ call SMI monitor (smi #1) @@ -475,8 +477,8 @@ skipl2dis: b logic_l1_restore .align -l2_inv_api_params: - .word 0x1, 0x00 +l2_inv_api_params_offset: + .long l2_inv_api_params - . l2_inv_gp: /* Execute smi to invalidate L2 cache */ mov r12, #0x1 @ set up to invalidate L2 @@ -531,6 +533,10 @@ l2dis_3630_offset: l2dis_3630: .word 0 + .data +l2_inv_api_params: + .word 0x1, 0x00 + /* * Internal functions */ -- cgit v1.2.3 From 4da597d16602d14405b71a18d45e1c59f28f0fd2 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 14 Jan 2016 12:20:48 -0800 Subject: ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata We don't want to write to .text so let's move ppa_zero_params and ppa_por_params to .data and access them via pointers. Note that I have not been able to test as we I don't have a HS omap4 to test with. The code has been changed in similar way as for omap3 though. Cc: Kees Cook Cc: Laura Abbott Cc: Nishanth Menon Cc: Richard Woodruff Cc: Russell King Cc: Tero Kristo Acked-by: Nicolas Pitre Cc: stable@vger.kernel.org # v4.0+ Fixes: 1e6b48116a95 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/sleep44xx.S | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9b09d85d811a..c7a3b4aab4b5 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -29,12 +29,6 @@ dsb .endm -ppa_zero_params: - .word 0x0 - -ppa_por_params: - .word 1, 0 - #ifdef CONFIG_ARCH_OMAP4 /* @@ -266,7 +260,9 @@ ENTRY(omap4_cpu_resume) beq skip_ns_smp_enable ppa_actrl_retry: mov r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX - adr r3, ppa_zero_params @ Pointer to parameters + adr r1, ppa_zero_params_offset + ldr r3, [r1] + add r3, r3, r1 @ Pointer to ppa_zero_params mov r1, #0x0 @ Process ID mov r2, #0x4 @ Flag mov r6, #0xff @@ -303,7 +299,9 @@ skip_ns_smp_enable: ldr r0, =OMAP4_PPA_L2_POR_INDEX ldr r1, =OMAP44XX_SAR_RAM_BASE ldr r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET] - adr r3, ppa_por_params + adr r1, ppa_por_params_offset + ldr r3, [r1] + add r3, r3, r1 @ Pointer to ppa_por_params str r4, [r3, #0x04] mov r1, #0x0 @ Process ID mov r2, #0x4 @ Flag @@ -328,6 +326,8 @@ skip_l2en: #endif b cpu_resume @ Jump to generic resume +ppa_por_params_offset: + .long ppa_por_params - . ENDPROC(omap4_cpu_resume) #endif /* CONFIG_ARCH_OMAP4 */ @@ -380,4 +380,13 @@ ENTRY(omap_do_wfi) nop ldmfd sp!, {pc} +ppa_zero_params_offset: + .long ppa_zero_params - . ENDPROC(omap_do_wfi) + + .data +ppa_zero_params: + .word 0 + +ppa_por_params: + .word 1, 0 -- cgit v1.2.3 From 143c6fe3a415edf2dde3f507b3a00998b4c4001e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 12 Jan 2016 08:11:04 -0800 Subject: ARM: omap2plus_defconfig: Enable ARM_KERNMEM_PERMS and few loadable modules With recent omap assembly fixes for CONFIG_DEBUG_RODATA, we can now use DEBUG_RODATA. Let's enable ARM_KERNMEM_PERMS so that DEBUG_RODATA gets selected by default. This way we can make sure any related issues are caught early. And while testing things on various devices, I noticed we're missing few loadable modules to make things more usable: - USB Ethernet for smsc75xx, we only have smsc97xx right now - Basic USB serial drivers for things like ftdi and pl2303 ports - Blinking leds with pca963x Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 0b3e471a4262..a7151744b85c 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -50,6 +50,7 @@ CONFIG_SOC_AM33XX=y CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y CONFIG_ARM_THUMBEE=y +CONFIG_ARM_KERNMEM_PERMS=y CONFIG_ARM_ERRATA_411920=y CONFIG_ARM_ERRATA_430973=y CONFIG_SMP=y @@ -177,6 +178,7 @@ CONFIG_TI_CPTS=y CONFIG_AT803X_PHY=y CONFIG_SMSC_PHY=y CONFIG_USB_USBNET=m +CONFIG_USB_NET_SMSC75XX=m CONFIG_USB_NET_SMSC95XX=m CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y @@ -354,6 +356,11 @@ CONFIG_USB_MUSB_DSPS=m CONFIG_USB_INVENTRA_DMA=y CONFIG_USB_TI_CPPI41_DMA=y CONFIG_USB_DWC3=m +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_SIMPLE=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_TEST=m CONFIG_AM335X_PHY_USB=y CONFIG_USB_GADGET=m @@ -387,6 +394,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m CONFIG_LEDS_GPIO=m CONFIG_LEDS_PWM=m +CONFIG_LEDS_PCA963X=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_ONESHOT=m -- cgit v1.2.3 From 8fc153cda9c9e6aed2a4a7235970dd6c6cb6e954 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 6 Jan 2016 18:29:19 +0000 Subject: arm64: KVM: Fix AArch64 guest userspace exception injection At the moment, our fault injection is pretty limited. We always generate a SYNC exception into EL1, as if the fault was actually from EL1h, no matter how it was generated. This is obviously wrong, as EL0 can generate faults of its own (not to mention the pretty-much unused EL1t mode). This patch fixes it by implementing section D1.10.2 of the ARMv8 ARM, and in particular table D1-7 ("Vector offsets from vector table base address"), which describes which vector to use depending on the source exception level and type (synchronous, IRQ, FIQ or SError). Reviewed-by: Christoffer Dall Tested-by: Shannon Zhao Signed-off-by: Marc Zyngier --- arch/arm64/kvm/inject_fault.c | 38 +++++++++++++++++++++++++++++++++++--- 1 file changed, 35 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/kvm/inject_fault.c b/arch/arm64/kvm/inject_fault.c index 648112e90ed5..4d1ac81870d2 100644 --- a/arch/arm64/kvm/inject_fault.c +++ b/arch/arm64/kvm/inject_fault.c @@ -27,7 +27,11 @@ #define PSTATE_FAULT_BITS_64 (PSR_MODE_EL1h | PSR_A_BIT | PSR_F_BIT | \ PSR_I_BIT | PSR_D_BIT) -#define EL1_EXCEPT_SYNC_OFFSET 0x200 + +#define CURRENT_EL_SP_EL0_VECTOR 0x0 +#define CURRENT_EL_SP_ELx_VECTOR 0x200 +#define LOWER_EL_AArch64_VECTOR 0x400 +#define LOWER_EL_AArch32_VECTOR 0x600 static void prepare_fault32(struct kvm_vcpu *vcpu, u32 mode, u32 vect_offset) { @@ -97,6 +101,34 @@ static void inject_abt32(struct kvm_vcpu *vcpu, bool is_pabt, *fsr = 0x14; } +enum exception_type { + except_type_sync = 0, + except_type_irq = 0x80, + except_type_fiq = 0x100, + except_type_serror = 0x180, +}; + +static u64 get_except_vector(struct kvm_vcpu *vcpu, enum exception_type type) +{ + u64 exc_offset; + + switch (*vcpu_cpsr(vcpu) & (PSR_MODE_MASK | PSR_MODE32_BIT)) { + case PSR_MODE_EL1t: + exc_offset = CURRENT_EL_SP_EL0_VECTOR; + break; + case PSR_MODE_EL1h: + exc_offset = CURRENT_EL_SP_ELx_VECTOR; + break; + case PSR_MODE_EL0t: + exc_offset = LOWER_EL_AArch64_VECTOR; + break; + default: + exc_offset = LOWER_EL_AArch32_VECTOR; + } + + return vcpu_sys_reg(vcpu, VBAR_EL1) + exc_offset + type; +} + static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr) { unsigned long cpsr = *vcpu_cpsr(vcpu); @@ -108,8 +140,8 @@ static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr *vcpu_spsr(vcpu) = cpsr; *vcpu_elr_el1(vcpu) = *vcpu_pc(vcpu); + *vcpu_pc(vcpu) = get_except_vector(vcpu, except_type_sync); *vcpu_cpsr(vcpu) = PSTATE_FAULT_BITS_64; - *vcpu_pc(vcpu) = vcpu_sys_reg(vcpu, VBAR_EL1) + EL1_EXCEPT_SYNC_OFFSET; vcpu_sys_reg(vcpu, FAR_EL1) = addr; @@ -143,8 +175,8 @@ static void inject_undef64(struct kvm_vcpu *vcpu) *vcpu_spsr(vcpu) = cpsr; *vcpu_elr_el1(vcpu) = *vcpu_pc(vcpu); + *vcpu_pc(vcpu) = get_except_vector(vcpu, except_type_sync); *vcpu_cpsr(vcpu) = PSTATE_FAULT_BITS_64; - *vcpu_pc(vcpu) = vcpu_sys_reg(vcpu, VBAR_EL1) + EL1_EXCEPT_SYNC_OFFSET; /* * Build an unknown exception, depending on the instruction -- cgit v1.2.3 From a7e0ac295d964086af3bf98352614f33c381213e Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Tue, 19 Jan 2016 16:20:18 +0000 Subject: arm64: KVM: Obey RES0/1 reserved bits when setting CPTR_EL2 Some bits in CPTR are defined as RES1 in the architecture. Setting these bits to zero may unintentionally enable future architecture extensions, allowing guests to use them without supervision by the host. This would be bad: for forwards compatibility, this patch makes sure the affected bits are always written with 1, not 0. This patch only addresses CPTR_EL2. Initialisation of other system registers may still need review. Reviewed-by: Marc Zyngier Signed-off-by: Dave Martin Signed-off-by: Marc Zyngier --- arch/arm64/include/asm/kvm_arm.h | 1 + arch/arm64/kvm/hyp/switch.c | 8 ++++++-- 2 files changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index 738a95f93e49..bef6e9243c63 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h @@ -182,6 +182,7 @@ #define CPTR_EL2_TCPAC (1 << 31) #define CPTR_EL2_TTA (1 << 20) #define CPTR_EL2_TFP (1 << CPTR_EL2_TFP_SHIFT) +#define CPTR_EL2_DEFAULT 0x000033ff /* Hyp Debug Configuration Register bits */ #define MDCR_EL2_TDRA (1 << 11) diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c index ca8f5a5e2f96..f0e7bdfae134 100644 --- a/arch/arm64/kvm/hyp/switch.c +++ b/arch/arm64/kvm/hyp/switch.c @@ -36,7 +36,11 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu) write_sysreg(val, hcr_el2); /* Trap on AArch32 cp15 c15 accesses (EL1 or EL0) */ write_sysreg(1 << 15, hstr_el2); - write_sysreg(CPTR_EL2_TTA | CPTR_EL2_TFP, cptr_el2); + + val = CPTR_EL2_DEFAULT; + val |= CPTR_EL2_TTA | CPTR_EL2_TFP; + write_sysreg(val, cptr_el2); + write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2); } @@ -45,7 +49,7 @@ static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu) write_sysreg(HCR_RW, hcr_el2); write_sysreg(0, hstr_el2); write_sysreg(read_sysreg(mdcr_el2) & MDCR_EL2_HPMN_MASK, mdcr_el2); - write_sysreg(0, cptr_el2); + write_sysreg(CPTR_EL2_DEFAULT, cptr_el2); } static void __hyp_text __activate_vm(struct kvm_vcpu *vcpu) -- cgit v1.2.3 From 9586a2ea6806599c819a9e800581c2a698ef7467 Mon Sep 17 00:00:00 2001 From: Shannon Zhao Date: Wed, 13 Jan 2016 17:16:39 +0800 Subject: arm64: KVM: Fix wrong use of the CPSR MODE mask for 32bit guests The values of CPSR MODE mask are different between aarch32 and aarch64. It should use the right one according to the execution state. Reviewed-by: Marc Zyngier Signed-off-by: Shannon Zhao Signed-off-by: Marc Zyngier --- arch/arm64/include/asm/kvm_emulate.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h index 3066328cd86b..779a5872a2c5 100644 --- a/arch/arm64/include/asm/kvm_emulate.h +++ b/arch/arm64/include/asm/kvm_emulate.h @@ -127,10 +127,14 @@ static inline unsigned long *vcpu_spsr(const struct kvm_vcpu *vcpu) static inline bool vcpu_mode_priv(const struct kvm_vcpu *vcpu) { - u32 mode = *vcpu_cpsr(vcpu) & PSR_MODE_MASK; + u32 mode; - if (vcpu_mode_is_32bit(vcpu)) + if (vcpu_mode_is_32bit(vcpu)) { + mode = *vcpu_cpsr(vcpu) & COMPAT_PSR_MODE_MASK; return mode > COMPAT_PSR_MODE_USR; + } + + mode = *vcpu_cpsr(vcpu) & PSR_MODE_MASK; return mode != PSR_MODE_EL0t; } -- cgit v1.2.3 From 7769db905bd2df08e844b645437f4729fc1c4d20 Mon Sep 17 00:00:00 2001 From: Shannon Zhao Date: Wed, 13 Jan 2016 17:16:40 +0800 Subject: arm64: KVM: Fix comments of the CP handler Make sure the documentation reflects the actual name of the functions. Acked-by: Marc Zyngier Signed-off-by: Shannon Zhao Signed-off-by: Marc Zyngier --- arch/arm64/kvm/sys_regs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index eec3598b4184..4048934bb3a5 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -1043,7 +1043,7 @@ static void unhandled_cp_access(struct kvm_vcpu *vcpu, } /** - * kvm_handle_cp_64 -- handles a mrrc/mcrr trap on a guest CP15 access + * kvm_handle_cp_64 -- handles a mrrc/mcrr trap on a guest CP14/CP15 access * @vcpu: The VCPU pointer * @run: The kvm_run struct */ @@ -1095,7 +1095,7 @@ out: } /** - * kvm_handle_cp15_32 -- handles a mrc/mcr trap on a guest CP15 access + * kvm_handle_cp_32 -- handles a mrc/mcr trap on a guest CP14/CP15 access * @vcpu: The VCPU pointer * @run: The kvm_run struct */ -- cgit v1.2.3 From 6327f35a2010c06a3bc2bfb14202a38764fb9920 Mon Sep 17 00:00:00 2001 From: Shannon Zhao Date: Wed, 13 Jan 2016 17:16:41 +0800 Subject: arm64: KVM: Fix guest dead loop when register accessor returns false Currently emulate_cp will return 0 (Handled) no matter what the accessor returns. If register accessor returns false, it will not skip current PC while emulate_cp return handled. Then guest will stuck in a dead loop. Reviewed-by: Marc Zyngier Signed-off-by: Shannon Zhao Signed-off-by: Marc Zyngier --- arch/arm64/kvm/sys_regs.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index 4048934bb3a5..2e90371cfb37 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -1007,10 +1007,9 @@ static int emulate_cp(struct kvm_vcpu *vcpu, if (likely(r->access(vcpu, params, r))) { /* Skip instruction, since it was emulated */ kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); + /* Handled */ + return 0; } - - /* Handled */ - return 0; } /* Not handled */ -- cgit v1.2.3 From 84d92dd3b6b785a6737f0409a920de31fb83343a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 21 Dec 2015 11:33:46 +0100 Subject: ARM: mvebu: kirkwood: Add compatible property to "partitions" node As of commit e488ca9f8d4f62c2 ("doc: dt: mtd: partitions: add compatible property to "partitions" node"), the "partitions" subnode of an SPI FLASH device node must have a compatible property. The partitions are no longer detected if it is not present. Signed-off-by: Geert Uytterhoeven Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts index 1db6f2c506cc..8082d64266a3 100644 --- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts +++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts @@ -131,6 +131,7 @@ chip-delay = <40>; status = "okay"; partitions { + compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From 293de94cd66cded940849545f47c701cc36c0931 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 21 Dec 2015 11:33:45 +0100 Subject: ARM: mvebu: ix4-300d: Add compatible property to "partitions" node As of commit e488ca9f8d4f62c2 ("doc: dt: mtd: partitions: add compatible property to "partitions" node"), the "partitions" subnode of an SPI FLASH device node must have a compatible property. The partitions are no longer detected if it is not present. Signed-off-by: Geert Uytterhoeven Acked-by: Brian Norris Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index 13cf69a8d0fb..fb9e1bbf2338 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -152,6 +152,7 @@ nand-on-flash-bbt; partitions { + compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From 144e08abe80080c9c2cf0a06e40f1bc8150674eb Mon Sep 17 00:00:00 2001 From: Roger Shimizu Date: Thu, 21 Jan 2016 23:38:44 +0900 Subject: ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wxl/wsxl For kirkwood, gpio pins starts from 32 are in the 2nd bank, so it should be converted to "gpio1 " in dts file. e.g. gpio 40 should be "gpio1 8" Besides, a few other pin fixes for ls-wxl/wsxl, to match with mpp pin definition: - gpio-leds: "lswxl:blue:power" pin - gpio-leds: "lswxl:red:func" pin - gpio-leds: "lswxl:red:hdderr0" pin - gpio-leds: "lswxl:red:hdderr1" pin - gpio-fan: low/high/alarm pin The pin/bank issue was found when discussing Debian Bug #810894 [https://bugs.debian.org/810894#47] Fixes: e54e4b1b622e ("ARM: dts: add buffalo linkstation ls-wxl/wsxl") Reported-by: Arnaud Patard (Rtp) Signed-off-by: Roger Shimizu Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/kirkwood-lswxl.dts | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-lswxl.dts b/arch/arm/boot/dts/kirkwood-lswxl.dts index f5db16a08597..0e93f6d19259 100644 --- a/arch/arm/boot/dts/kirkwood-lswxl.dts +++ b/arch/arm/boot/dts/kirkwood-lswxl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WXL/WSXL * - * Copyright (C) 2015, rogershimizu@gmail.com + * Copyright (C) 2015, 2016 + * Roger Shimizu * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -156,21 +157,21 @@ button@1 { label = "Function Button"; linux,code = ; - gpios = <&gpio1 41 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; button@2 { label = "Power-on Switch"; linux,code = ; linux,input-type = <5>; - gpios = <&gpio1 42 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; button@3 { label = "Power-auto Switch"; linux,code = ; linux,input-type = <5>; - gpios = <&gpio1 43 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; @@ -185,12 +186,12 @@ led@1 { label = "lswxl:blue:func"; - gpios = <&gpio1 36 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; led@2 { label = "lswxl:red:alarm"; - gpios = <&gpio1 49 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; led@3 { @@ -200,23 +201,23 @@ led@4 { label = "lswxl:blue:power"; - gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; }; led@5 { label = "lswxl:red:func"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; default-state = "keep"; }; led@6 { label = "lswxl:red:hdderr0"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; led@7 { label = "lswxl:red:hdderr1"; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; }; @@ -225,15 +226,15 @@ pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; pinctrl-names = "default"; - gpios = <&gpio0 47 GPIO_ACTIVE_LOW - &gpio0 48 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW + &gpio1 15 GPIO_ACTIVE_LOW>; gpio-fan,speed-map = <0 3 1500 2 3250 1 5000 0>; - alarm-gpios = <&gpio1 49 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; restart_poweroff { @@ -256,7 +257,7 @@ enable-active-high; regulator-always-on; regulator-boot-on; - gpio = <&gpio0 37 GPIO_ACTIVE_HIGH>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; hdd_power0: regulator@2 { compatible = "regulator-fixed"; -- cgit v1.2.3 From 6f86e9adc53b4c0a2a4283692216d119019f0b8d Mon Sep 17 00:00:00 2001 From: Roger Shimizu Date: Thu, 21 Jan 2016 23:38:45 +0900 Subject: ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wvl/vl For kirkwood, gpio pins starts from 32 are in the 2nd bank, so it should be converted to "gpio1 " in dts file. e.g. gpio 40 should be "gpio1 8" The pin/bank issue was found when discussing Debian Bug #810894 [https://bugs.debian.org/810894#47] Fixes: c43379e150aa ("ARM: dts: add buffalo linkstation ls-wvl/vl") Reported-by: Arnaud Patard (Rtp) Signed-off-by: Roger Shimizu Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/kirkwood-lswvl.dts | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-lswvl.dts b/arch/arm/boot/dts/kirkwood-lswvl.dts index 09eed3cea0af..28fd9abd7a57 100644 --- a/arch/arm/boot/dts/kirkwood-lswvl.dts +++ b/arch/arm/boot/dts/kirkwood-lswvl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WVL/VL * - * Copyright (C) 2015, rogershimizu@gmail.com + * Copyright (C) 2015, 2016 + * Roger Shimizu * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -156,21 +157,21 @@ button@1 { label = "Function Button"; linux,code = ; - gpios = <&gpio0 45 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; }; button@2 { label = "Power-on Switch"; linux,code = ; linux,input-type = <5>; - gpios = <&gpio0 46 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; button@3 { label = "Power-auto Switch"; linux,code = ; linux,input-type = <5>; - gpios = <&gpio0 47 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; }; @@ -185,38 +186,38 @@ led@1 { label = "lswvl:red:alarm"; - gpios = <&gpio0 36 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; led@2 { label = "lswvl:red:func"; - gpios = <&gpio0 37 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; led@3 { label = "lswvl:amber:info"; - gpios = <&gpio0 38 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; led@4 { label = "lswvl:blue:func"; - gpios = <&gpio0 39 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; }; led@5 { label = "lswvl:blue:power"; - gpios = <&gpio0 40 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; default-state = "keep"; }; led@6 { label = "lswvl:red:hdderr0"; - gpios = <&gpio0 34 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; }; led@7 { label = "lswvl:red:hdderr1"; - gpios = <&gpio0 35 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; }; }; @@ -233,7 +234,7 @@ 3250 1 5000 0>; - alarm-gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; restart_poweroff { -- cgit v1.2.3 From e98bd707e39d52d8bef8622e6e7b0ab4bd0ed8d0 Mon Sep 17 00:00:00 2001 From: Roger Shimizu Date: Thu, 21 Jan 2016 23:38:46 +0900 Subject: ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wxl/wsxl The GPIOs controlling the LEDs, listed below, are active high, not low: - gpio-leds: "lswxl:blue:power" pin - gpio-leds: "lswxl:red:func" pin - gpio-leds: "lswxl:red:hdderr{0,1}" pin Fixes: e54e4b1b622e ("ARM: dts: add buffalo linkstation ls-wxl/wsxl") Signed-off-by: Roger Shimizu Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/kirkwood-lswxl.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-lswxl.dts b/arch/arm/boot/dts/kirkwood-lswxl.dts index 0e93f6d19259..b13ec20a7088 100644 --- a/arch/arm/boot/dts/kirkwood-lswxl.dts +++ b/arch/arm/boot/dts/kirkwood-lswxl.dts @@ -201,23 +201,23 @@ led@4 { label = "lswxl:blue:power"; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + default-state = "keep"; }; led@5 { label = "lswxl:red:func"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - default-state = "keep"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; }; led@6 { label = "lswxl:red:hdderr0"; - gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; }; led@7 { label = "lswxl:red:hdderr1"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; }; -- cgit v1.2.3 From 0418138e2ffd90f4a00b263593f2e199db87321d Mon Sep 17 00:00:00 2001 From: Roger Shimizu Date: Thu, 21 Jan 2016 23:38:47 +0900 Subject: ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vl The GPIOs controlling the LEDs, listed below, are active high, not low: - gpio-leds: "lswvl:red:alarm" pin - gpio-leds: "lswvl:red:func" pin - gpio-leds: "lswvl:amber:info" pin - gpio-leds: "lswvl:blue:func" pin - gpio-leds: "lswvl:red:hdderr{0,1}" pin Fixes: c43379e150aa ("ARM: dts: add buffalo linkstation ls-wvl/vl") Signed-off-by: Roger Shimizu Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/kirkwood-lswvl.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-lswvl.dts b/arch/arm/boot/dts/kirkwood-lswvl.dts index 28fd9abd7a57..36eec7392ab4 100644 --- a/arch/arm/boot/dts/kirkwood-lswvl.dts +++ b/arch/arm/boot/dts/kirkwood-lswvl.dts @@ -186,22 +186,22 @@ led@1 { label = "lswvl:red:alarm"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; }; led@2 { label = "lswvl:red:func"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; led@3 { label = "lswvl:amber:info"; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; }; led@4 { label = "lswvl:blue:func"; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; led@5 { @@ -212,12 +212,12 @@ led@6 { label = "lswvl:red:hdderr0"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; }; led@7 { label = "lswvl:red:hdderr1"; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; }; }; -- cgit v1.2.3 From ff61ee84e7aa5842d9e33c0b442f0b43a6a44eaf Mon Sep 17 00:00:00 2001 From: Roger Shimizu Date: Fri, 22 Jan 2016 00:00:36 +0900 Subject: ARM: dts: orion5x: gpio pin fixes for linkstation lswtgl Here're a few gpio pin related fixes: - remove pinctrl-0 definition from pinctrl, since those pins are used in other places such as gpio-fan and regulators. - keep initial state of power led - fix for alarm pin of gpio-fan. Fixes: dc57844a736f ("ARM: dts: orion5x: add buffalo linkstation ls-wtgl") Signed-off-by: Roger Shimizu Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts index 3daec912b4bf..420788229e6f 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WTGL * - * Copyright (C) 2015, Roger Shimizu + * Copyright (C) 2015, 2016 + * Roger Shimizu * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -69,8 +70,6 @@ internal-regs { pinctrl: pinctrl@10000 { - pinctrl-0 = <&pmx_usb_power &pmx_power_hdd - &pmx_fan_low &pmx_fan_high &pmx_fan_lock>; pinctrl-names = "default"; pmx_led_power: pmx-leds { @@ -162,6 +161,7 @@ led@1 { label = "lswtgl:blue:power"; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; led@2 { @@ -188,7 +188,7 @@ 3250 1 5000 0>; - alarm-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; restart_poweroff { -- cgit v1.2.3 From 20437f79f6627a31752f422688a6047c25cefcf1 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Fri, 22 Jan 2016 17:15:51 +0100 Subject: ARM: OMAP: Add PWM dmtimer platform data quirks In order to set the currently platform dependent dmtimer functions pointers as platform data for the pwm-omap-dmtimer platform driver, add it to plat-omap auxdata_lookup table. Suggested-by: Tony Lindgren Signed-off-by: Neil Armstrong Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pdata-quirks.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index e781e4fae13a..a935d28443da 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -23,6 +23,8 @@ #include #include #include +#include +#include #include "common.h" #include "common-board-devices.h" @@ -449,6 +451,24 @@ void omap_auxdata_legacy_init(struct device *dev) dev->platform_data = &twl_gpio_auxdata; } +/* Dual mode timer PWM callbacks platdata */ +#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) +struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = { + .request_by_node = omap_dm_timer_request_by_node, + .free = omap_dm_timer_free, + .enable = omap_dm_timer_enable, + .disable = omap_dm_timer_disable, + .get_fclk = omap_dm_timer_get_fclk, + .start = omap_dm_timer_start, + .stop = omap_dm_timer_stop, + .set_load = omap_dm_timer_set_load, + .set_match = omap_dm_timer_set_match, + .set_pwm = omap_dm_timer_set_pwm, + .set_prescaler = omap_dm_timer_set_prescaler, + .write_counter = omap_dm_timer_write_counter, +}; +#endif + /* * Few boards still need auxdata populated before we populate * the dev entries in of_platform_populate(). @@ -502,6 +522,9 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3", &wkup_m3_data), #endif +#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) + OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata), +#endif #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu", &omap4_iommu_pdata), -- cgit v1.2.3 From 0ea24daae053a9ba65d2f3eb20523002c1a8af38 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Thu, 21 Jan 2016 11:03:20 -0600 Subject: ARM: dts: Fix wl12xx missing clocks that cause hangs The tcxo-clock-frequency binding is listed as optional, but without it the wl12xx used on the torpedo + wireless may hang. Scanning also appears broken without this patch. Signed-off-by: Adam Ford Fixes: 687c27676151 ("ARM: dts: Add minimal support for LogicPD Torpedo DM3730 devkit") Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 7fed0bd4f3de..93f50d6777c8 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -143,6 +143,7 @@ interrupt-parent = <&gpio5>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; }; }; -- cgit v1.2.3 From 929e883f2bfdf68d4bd3aec43912e956417005c7 Mon Sep 17 00:00:00 2001 From: Mohamed Jamsheeth Hajanajubudeen Date: Fri, 11 Dec 2015 17:06:26 +0530 Subject: ARM: dts: at91: sama5d4: fix instance id of DBGU Change instance id of DBGU to 45. Signed-off-by: Mohamed Jamsheeth Hajanajubudeen Fixes: 7c661394c56c ("ARM: at91: dt: add device tree file for SAMA5D4 SoC") Cc: stable@vger.kernel.org # 3.18+ Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/sama5d4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index b8032bca4621..db1151c18466 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1342,7 +1342,7 @@ dbgu: serial@fc069000 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfc069000 0x200>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; + interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; clocks = <&dbgu_clk>; -- cgit v1.2.3 From 1a469ae2ced763fc0d4edb3c9d7b4188deee950c Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 19 Jan 2016 02:30:59 +0100 Subject: ARM: dts: at91: at91sam9n12ek: fix panel compatible string Properly use qiaodian as the vendor prefix for the panel. Signed-off-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9n12ek.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index ca4ddf86817a..626c67d66626 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -215,7 +215,7 @@ }; panel: panel { - compatible = "qd,qd43003c0-40", "simple-panel"; + compatible = "qiaodian,qd43003c0-40", "simple-panel"; backlight = <&backlight>; power-supply = <&panel_reg>; #address-cells = <1>; -- cgit v1.2.3 From 6c482fd15d4ff211ce0e63a628cbda17201b33a0 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 12 Jan 2016 15:55:12 +0100 Subject: ARM: dts: at91: sama5d2 xplained: add phy address and IRQ for macb0 After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091) the macb0 interface has difficulties to come back from power saving mode if address not explicitly set up. As the micrel phy on the board is actually configured to show up at address 1 we use this explicitly. Adding the phy node and its real address fixes the issue. The phy IRQ and associated pinmux node is also added. Signed-off-by: Nicolas Ferre Acked-by: Alexandre Belloni Cc: stable@vger.kernel.org # 4.4+ // manual merge needed --- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 77ddff036409..e683856c507c 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -114,9 +114,15 @@ macb0: ethernet@f8008000 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_macb0_default>; + pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>; phy-mode = "rmii"; status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioA>; + interrupts = <73 IRQ_TYPE_LEVEL_LOW>; + }; }; pdmic@f8018000 { @@ -300,6 +306,10 @@ bias-disable; }; + pinctrl_macb0_phy_irq: macb0_phy_irq { + pinmux = ; + }; + pinctrl_pdmic_default: pdmic_default { pinmux = , ; -- cgit v1.2.3 From aae6b18f5c95b9dc78de66d1e27e8afeee2763b7 Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Wed, 27 Jan 2016 13:16:24 +0800 Subject: ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0 On SAMA5D4EK board, the Ethernet doesn't work after resuming from the suspend state. Signed-off-by: Wenyou Yang [nicolas.ferre@atmel.com: adapt to newer kernel] Fixes: 38153a017896 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board") Cc: # 4.1+ Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91-sama5d4ek.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 2d4a33100af6..4e98cda97403 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -160,8 +160,15 @@ }; macb0: ethernet@f8020000 { + pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>; phy-mode = "rmii"; status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioE>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + }; }; mmc1: mmc@fc000000 { @@ -193,6 +200,10 @@ pinctrl@fc06a000 { board { + pinctrl_macb0_phy_irq: macb0_phy_irq { + atmel,pins = + ; + }; pinctrl_mmc0_cd: mmc0_cd { atmel,pins = ; -- cgit v1.2.3 From f505dba762ae826bb68978a85ee5c8ced7dea8d7 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 15 Jan 2016 09:30:18 +0100 Subject: ARM: dts: at91: sama5d4 xplained: properly mux phy interrupt No interrupt were received from the phy because PIOE 1 may not be properly muxed. It prevented proper link detection, especially since commit 321beec5047a ("net: phy: Use interrupts when available in NOLINK state") disables polling. Cc: # 4.4 Signed-off-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91-sama5d4_xplained.dts | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 131614f28e75..8cf9999cb0cd 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -86,6 +86,8 @@ macb0: ethernet@f8020000 { phy-mode = "rmii"; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>; phy0: ethernet-phy@1 { interrupt-parent = <&pioE>; @@ -152,6 +154,10 @@ atmel,pins = ; }; + pinctrl_macb0_phy_irq: macb0_phy_irq_0 { + atmel,pins = + ; + }; }; }; }; -- cgit v1.2.3 From e873cc022ce5e2c04bbc53b5874494b657e29d3f Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 27 Jan 2016 11:03:02 +0100 Subject: ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type For phy0 KSZ8081, the type of GPIO IRQ should be "level low" instead of "edge falling". Signed-off-by: Nicolas Ferre Fixes: 38153a017896 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board") Cc: # 4.1+ --- arch/arm/boot/dts/at91-sama5d4_xplained.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 8cf9999cb0cd..569026e8f96c 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -91,7 +91,7 @@ phy0: ethernet-phy@1 { interrupt-parent = <&pioE>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; reg = <1>; }; }; -- cgit v1.2.3 From 84fb225ad257442d879a1f57c79184e31fb17aea Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Mon, 28 Dec 2015 15:52:04 +0200 Subject: ARM: dts: am4372: fix irq type for arm twd and global timer As per ARM documentation PPI(0) ID27 - global timer interrupt is rising-edge sensitive. PPI(2) ID29 - twd interrupt is rising-edge sensitive. and the same is proved by GIC distributor register value GIC_DIST_CONFIG(0xC04) = 0x7DC00000. Hence, set IRQ triggering type to IRQ_TYPE_EDGE_RISING for ARM TWD and Global timers. Signed-off-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am4372.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index d3abd2753640..92068fbf8b57 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -73,7 +73,7 @@ global_timer: timer@48240200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x48240200 0x100>; - interrupts = ; + interrupts = ; interrupt-parent = <&gic>; clocks = <&mpu_periphclk>; }; @@ -81,7 +81,7 @@ local_timer: timer@48240600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x48240600 0x100>; - interrupts = ; + interrupts = ; interrupt-parent = <&gic>; clocks = <&mpu_periphclk>; }; -- cgit v1.2.3 From 95e7d03e086846df987121e6894f05aae44ff132 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Mon, 28 Dec 2015 15:52:39 +0200 Subject: ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types Now IRQs for Pixcir Tangoc touchscreen are defined using IRQ_TYPE_NONE in am437x-gp-evm.dts and am43x-epos-evm.dts wich do not correspond HW. Hence, update am437x-gp-evm.dts and am43x-epos-evm.dts files and use correct flag IRQ_TYPE_EDGE_FALLING for irq types. While here, remove duplicated irq declaration for pixcir_ts@5c node in am437x-gp-evm.dts. Signed-off-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-gp-evm.dts | 4 +--- arch/arm/boot/dts/am43x-epos-evm.dts | 2 +- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 64d43325bcbc..ecd09ab6d581 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -590,8 +590,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pixcir_ts_pins>; reg = <0x5c>; - interrupt-parent = <&gpio3>; - interrupts = <22 0>; attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; @@ -599,7 +597,7 @@ * 0x264 represents the offset of padconf register of * gpio3_22 from am43xx_pinmux base. */ - interrupts-extended = <&gpio3 22 IRQ_TYPE_NONE>, + interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>, <&am43xx_pinmux 0x264>; interrupt-names = "tsc", "wakeup"; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 746fd2b17958..d580e2b70f9a 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -491,7 +491,7 @@ pinctrl-0 = <&pixcir_ts_pins>; reg = <0x5c>; interrupt-parent = <&gpio1>; - interrupts = <17 0>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; -- cgit v1.2.3 From 2dfdc7544219729ddf5c8e8404348b72e0d0d7c5 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Fri, 1 Jan 2016 10:38:28 -0600 Subject: ARM: dts: LogicPD Torpedo: Revert Duplicative Entries Revert commit 7cd6ca770d1b ("ARM: dts: Change I2C2 and I2C3 to 400KHz for LogicPD Torpedo DM3730 devkit") It was already done and it is just a duplicate. Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 93f50d6777c8..00805322367e 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -112,14 +112,6 @@ clock-frequency = <400000>; }; -&i2c2 { - clock-frequency = <400000>; -}; - -&i2c3 { - clock-frequency = <400000>; -}; - /* * Only found on the wireless SOM. For the SOM without wireless, the pins for * MMC3 can be routed with jumpers to the second MMC slot on the devkit and -- cgit v1.2.3 From bd73da8c3b9dd1cc8957bb2c90757fffb51b1396 Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Wed, 30 Dec 2015 15:39:00 +0200 Subject: ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address Fix SB-SOM EEPROM I2C address Signed-off-by: Dmitry Lifshitz Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-sbc-am57x.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts index 77bb8e17401a..0f1d42553d5e 100644 --- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts +++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts @@ -108,9 +108,9 @@ pinctrl-0 = <&i2c5_pins_default>; clock-frequency = <400000>; - eeprom_base: atmel@50 { + eeprom_base: atmel@54 { compatible = "atmel,24c08"; - reg = <0x50>; + reg = <0x54>; pagesize = <16>; }; -- cgit v1.2.3 From c71ff38e325fa41a610b051030db41d9cdf011ef Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Wed, 30 Dec 2015 15:39:01 +0200 Subject: ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2 Setup USB2 to act in "HOST" mode by default. Signed-off-by: Dmitry Lifshitz Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index c53882643ae9..513ec62bac1b 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -588,7 +588,7 @@ }; &usb2 { - dr_mode = "peripheral"; + dr_mode = "host"; }; &mcasp3 { -- cgit v1.2.3 From e46c408fc74b96a562590bf7c7c2a2e18f88fb06 Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Wed, 30 Dec 2015 15:39:02 +0200 Subject: ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency On-board SPI flash cat act at 48Mhz SPI bus frequency. Update the DT frequency property. Signed-off-by: Dmitry Lifshitz Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 513ec62bac1b..cb9a51884167 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -492,14 +492,14 @@ pinctrl-names = "default"; pinctrl-0 = <&qspi1_pins>; - spi-max-frequency = <20000000>; + spi-max-frequency = <48000000>; spi_flash: spi_flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spansion,m25p80", "jedec,spi-nor"; reg = <0>; /* CS0 */ - spi-max-frequency = <20000000>; + spi-max-frequency = <48000000>; partition@0 { label = "uboot"; -- cgit v1.2.3 From 5ddfc9fc9b2cd6be71bd002f0f36198d487d5085 Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Wed, 30 Dec 2015 15:39:03 +0200 Subject: ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux Fix UART3 pinmux. Signed-off-by: Dmitry Lifshitz Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-sbc-am57x.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts index 0f1d42553d5e..988e99632d49 100644 --- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts +++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts @@ -25,8 +25,8 @@ &dra7_pmx_core { uart3_pins_default: uart3_pins_default { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */ - DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */ + DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ + DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ >; }; -- cgit v1.2.3 From 2fe8bab2b0b1ab72dc54814c5d904a1044b36acc Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Wed, 30 Dec 2015 15:39:04 +0200 Subject: ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux Fix CPSW EMAC pinmux Signed-off-by: Dmitry Lifshitz Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index cb9a51884167..9e0153a70d51 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -167,7 +167,7 @@ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ - DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLUP | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ + DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ >; }; -- cgit v1.2.3 From ab342c77fa60a30fce4d4228f88fd1b7bf566055 Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Wed, 30 Dec 2015 15:39:05 +0200 Subject: ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings Update Eth PHY settings to make it possible to run both phys at 1Gbps. Signed-off-by: Dmitry Lifshitz Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 9e0153a70d51..8d93882dc8d5 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -559,13 +559,13 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-txid"; dual_emac_res_vlan = <0>; }; &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-txid"; dual_emac_res_vlan = <1>; }; -- cgit v1.2.3 From c84f6b8bce8723d8232547d6a3a3ae0725511adb Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 29 Jan 2016 12:08:24 +0200 Subject: ARM: omap2plus_defconfig: update display configs omapfb and omapdrm were recently made independent of each other, and this required Kconfig option changes. This patch changes the omap2plus_defconfig to enable display similarly as before: omapfb and panel & encoder drivers as modules. Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 33 ++++++++++++++++----------------- 1 file changed, 16 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c5e1943e5427..b9581f1f0536 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -290,24 +290,23 @@ CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y -CONFIG_OMAP2_DSS=m -CONFIG_OMAP5_DSS_HDMI=y -CONFIG_OMAP2_DSS_SDI=y -CONFIG_OMAP2_DSS_DSI=y +CONFIG_FB_OMAP5_DSS_HDMI=y +CONFIG_FB_OMAP2_DSS_SDI=y +CONFIG_FB_OMAP2_DSS_DSI=y CONFIG_FB_OMAP2=m -CONFIG_DISPLAY_ENCODER_TFP410=m -CONFIG_DISPLAY_ENCODER_TPD12S015=m -CONFIG_DISPLAY_CONNECTOR_DVI=m -CONFIG_DISPLAY_CONNECTOR_HDMI=m -CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m -CONFIG_DISPLAY_PANEL_DPI=m -CONFIG_DISPLAY_PANEL_DSI_CM=m -CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m -CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m -CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m -CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m -CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m -CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m +CONFIG_FB_OMAP2_ENCODER_TFP410=m +CONFIG_FB_OMAP2_ENCODER_TPD12S015=m +CONFIG_FB_OMAP2_CONNECTOR_DVI=m +CONFIG_FB_OMAP2_CONNECTOR_HDMI=m +CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m +CONFIG_FB_OMAP2_PANEL_DPI=m +CONFIG_FB_OMAP2_PANEL_DSI_CM=m +CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m +CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m +CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m +CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m +CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m +CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y -- cgit v1.2.3 From d584f0fb041d86b9605fae1f0ed9e268f217daa9 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 22 Jan 2016 14:27:50 +0530 Subject: ARCv2: clocksource: Rename GRTC -> GFRC ... ... it is now called Global Free Running Counter Signed-off-by: Vineet Gupta --- arch/arc/Kconfig | 2 +- arch/arc/configs/vdk_hs38_smp_defconfig | 2 +- arch/arc/include/asm/mcip.h | 4 ++-- arch/arc/kernel/mcip.c | 10 +++++----- arch/arc/kernel/time.c | 8 ++++---- 5 files changed, 13 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 6312f607932f..bb15e8062b1f 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -413,7 +413,7 @@ config ARC_HAS_RTC default n depends on !SMP -config ARC_HAS_GRTC +config ARC_HAS_GFRC bool "SMP synchronized 64-bit cycle counter" default y depends on SMP diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig index f36c047b33ca..735985974a31 100644 --- a/arch/arc/configs/vdk_hs38_smp_defconfig +++ b/arch/arc/configs/vdk_hs38_smp_defconfig @@ -16,7 +16,7 @@ CONFIG_ARC_PLAT_AXS10X=y CONFIG_AXS103=y CONFIG_ISA_ARCV2=y CONFIG_SMP=y -# CONFIG_ARC_HAS_GRTC is not set +# CONFIG_ARC_HAS_GFRC is not set CONFIG_ARC_UBOOT_SUPPORT=y CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp" CONFIG_PREEMPT=y diff --git a/arch/arc/include/asm/mcip.h b/arch/arc/include/asm/mcip.h index 46f4e5351b2a..847e3bbe387f 100644 --- a/arch/arc/include/asm/mcip.h +++ b/arch/arc/include/asm/mcip.h @@ -39,8 +39,8 @@ struct mcip_cmd { #define CMD_DEBUG_SET_MASK 0x34 #define CMD_DEBUG_SET_SELECT 0x36 -#define CMD_GRTC_READ_LO 0x42 -#define CMD_GRTC_READ_HI 0x43 +#define CMD_GFRC_READ_LO 0x42 +#define CMD_GFRC_READ_HI 0x43 #define CMD_IDU_ENABLE 0x71 #define CMD_IDU_DISABLE 0x72 diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c index bd237acdf4f2..bc771f58fefb 100644 --- a/arch/arc/kernel/mcip.c +++ b/arch/arc/kernel/mcip.c @@ -96,13 +96,13 @@ static void mcip_probe_n_setup(void) #ifdef CONFIG_CPU_BIG_ENDIAN unsigned int pad3:8, idu:1, llm:1, num_cores:6, - iocoh:1, grtc:1, dbg:1, pad2:1, + iocoh:1, gfrc:1, dbg:1, pad2:1, msg:1, sem:1, ipi:1, pad:1, ver:8; #else unsigned int ver:8, pad:1, ipi:1, sem:1, msg:1, - pad2:1, dbg:1, grtc:1, iocoh:1, + pad2:1, dbg:1, gfrc:1, iocoh:1, num_cores:6, llm:1, idu:1, pad3:8; #endif @@ -116,7 +116,7 @@ static void mcip_probe_n_setup(void) IS_AVAIL1(mp.ipi, "IPI "), IS_AVAIL1(mp.idu, "IDU "), IS_AVAIL1(mp.dbg, "DEBUG "), - IS_AVAIL1(mp.grtc, "GRTC")); + IS_AVAIL1(mp.gfrc, "GFRC")); idu_detected = mp.idu; @@ -125,8 +125,8 @@ static void mcip_probe_n_setup(void) __mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xf, 0xf); } - if (IS_ENABLED(CONFIG_ARC_HAS_GRTC) && !mp.grtc) - panic("kernel trying to use non-existent GRTC\n"); + if (IS_ENABLED(CONFIG_ARC_HAS_GFRC) && !mp.gfrc) + panic("kernel trying to use non-existent GFRC\n"); } struct plat_smp_ops plat_smp_ops = { diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c index dfad287f1db1..156d9833ff84 100644 --- a/arch/arc/kernel/time.c +++ b/arch/arc/kernel/time.c @@ -62,7 +62,7 @@ /********** Clock Source Device *********/ -#ifdef CONFIG_ARC_HAS_GRTC +#ifdef CONFIG_ARC_HAS_GFRC static int arc_counter_setup(void) { @@ -83,10 +83,10 @@ static cycle_t arc_counter_read(struct clocksource *cs) local_irq_save(flags); - __mcip_cmd(CMD_GRTC_READ_LO, 0); + __mcip_cmd(CMD_GFRC_READ_LO, 0); stamp.l = read_aux_reg(ARC_REG_MCIP_READBACK); - __mcip_cmd(CMD_GRTC_READ_HI, 0); + __mcip_cmd(CMD_GFRC_READ_HI, 0); stamp.h = read_aux_reg(ARC_REG_MCIP_READBACK); local_irq_restore(flags); @@ -95,7 +95,7 @@ static cycle_t arc_counter_read(struct clocksource *cs) } static struct clocksource arc_counter = { - .name = "ARConnect GRTC", + .name = "ARConnect GFRC", .rating = 400, .read = arc_counter_read, .mask = CLOCKSOURCE_MASK(64), -- cgit v1.2.3 From b89bd1f4fbaecaa842588a034f8a44f4a84597e4 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 22 Jan 2016 15:20:18 +0530 Subject: ARC: shrink cpuinfo by not saving full timer BCR Signed-off-by: Vineet Gupta --- arch/arc/include/asm/arcregs.h | 3 +-- arch/arc/kernel/setup.c | 19 ++++++++++++------- 2 files changed, 13 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h index 7fac7d85ed6a..fdc5be5b1029 100644 --- a/arch/arc/include/asm/arcregs.h +++ b/arch/arc/include/asm/arcregs.h @@ -349,14 +349,13 @@ struct cpuinfo_arc { struct cpuinfo_arc_bpu bpu; struct bcr_identity core; struct bcr_isa isa; - struct bcr_timer timers; unsigned int vec_base; struct cpuinfo_arc_ccm iccm, dccm; struct { unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, pad1:3, fpu_sp:1, fpu_dp:1, pad2:6, debug:1, ap:1, smart:1, rtt:1, pad3:4, - pad4:8; + timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4; } extn; struct bcr_mpy extn_mpy; struct bcr_extn_xymem extn_xymem; diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index e1b87444ea9a..7f0a3cb300a8 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -45,6 +45,7 @@ struct cpuinfo_arc cpuinfo_arc700[NR_CPUS]; static void read_arc_build_cfg_regs(void) { struct bcr_perip uncached_space; + struct bcr_timer timer; struct bcr_generic bcr; struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; unsigned long perip_space; @@ -53,7 +54,11 @@ static void read_arc_build_cfg_regs(void) READ_BCR(AUX_IDENTITY, cpu->core); READ_BCR(ARC_REG_ISA_CFG_BCR, cpu->isa); - READ_BCR(ARC_REG_TIMERS_BCR, cpu->timers); + READ_BCR(ARC_REG_TIMERS_BCR, timer); + cpu->extn.timer0 = timer.t0; + cpu->extn.timer1 = timer.t1; + cpu->extn.rtc = timer.rtc; + cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE); READ_BCR(ARC_REG_D_UNCACH_BCR, uncached_space); @@ -208,9 +213,9 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len) (unsigned int)(arc_get_core_freq() / 10000) % 100); n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s\nISA Extn\t: ", - IS_AVAIL1(cpu->timers.t0, "Timer0 "), - IS_AVAIL1(cpu->timers.t1, "Timer1 "), - IS_AVAIL2(cpu->timers.rtc, "64-bit RTC ", + IS_AVAIL1(cpu->extn.timer0, "Timer0 "), + IS_AVAIL1(cpu->extn.timer1, "Timer1 "), + IS_AVAIL2(cpu->extn.rtc, "Local-64-bit-Ctr ", CONFIG_ARC_HAS_RTC)); n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s", @@ -293,13 +298,13 @@ static void arc_chk_core_config(void) struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; int fpu_enabled; - if (!cpu->timers.t0) + if (!cpu->extn.timer0) panic("Timer0 is not present!\n"); - if (!cpu->timers.t1) + if (!cpu->extn.timer1) panic("Timer1 is not present!\n"); - if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->timers.rtc) + if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->extn.rtc) panic("RTC is not present\n"); #ifdef CONFIG_ARC_HAS_DCCM -- cgit v1.2.3 From 4d0cb15fccd1db9dac0c964b2ccf10874e69f5b8 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 29 Jan 2016 16:47:44 +0530 Subject: ARCv2: Check for LL-SC livelock only if LLSC is enabled Signed-off-by: Vineet Gupta --- arch/arc/kernel/setup.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index 7f0a3cb300a8..a7edceba5f84 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -339,6 +339,7 @@ static void arc_chk_core_config(void) panic("FPU non-existent, disable CONFIG_ARC_FPU_SAVE_RESTORE\n"); if (is_isa_arcv2() && IS_ENABLED(CONFIG_SMP) && cpu->isa.atomic && + IS_ENABLED(CONFIG_ARC_HAS_LLSC) && !IS_ENABLED(CONFIG_ARC_STAR_9000923308)) panic("llock/scond livelock workaround missing\n"); } -- cgit v1.2.3 From 19f97c98307115f5a6b0bbf84850c9c272ce5dd3 Mon Sep 17 00:00:00 2001 From: Aneesh Kumar K.V Date: Fri, 29 Jan 2016 22:32:49 +0530 Subject: powerpc/book3s_32: Fix build error with checkpoint restart In file included from mm/vmscan.c:54:0: include/linux/swapops.h: In function ‘pte_to_swp_entry’: include/linux/swapops.h:69:2: error: implicit declaration of function ‘pte_swp_soft_dirty’ [-Werror=implicit-function-declaration] if (pte_swp_soft_dirty(pte)) ^ include/linux/swapops.h:70:3: error: implicit declaration of function ‘pte_swp_clear_soft_dirty’ [-Werror=implicit-function-declaration] pte = pte_swp_clear_soft_dirty(pte); We support soft dirty tracking only with book3s 64 for now. So change the Kconfig dependency accordingly. Also CHECKPOINT_RESTORE feature is not really dependent on SOFT_DIRTY. We track the dependency between MEM_SOFT_DIRTY and ARCH_SOFT_DIRTY through headers Fixes: 7207f43665b8 ("powerpc/mm: Add page soft dirty tracking") Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman --- arch/powerpc/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 94f6c5089e0c..5ead6a31854b 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -557,7 +557,7 @@ choice config PPC_4K_PAGES bool "4k page size" - select HAVE_ARCH_SOFT_DIRTY if CHECKPOINT_RESTORE && PPC_BOOK3S + select HAVE_ARCH_SOFT_DIRTY if PPC_BOOK3S_64 config PPC_16K_PAGES bool "16k page size" @@ -566,7 +566,7 @@ config PPC_16K_PAGES config PPC_64K_PAGES bool "64k page size" depends on !PPC_FSL_BOOK3E && (44x || PPC_STD_MMU_64 || PPC_BOOK3E_64) - select HAVE_ARCH_SOFT_DIRTY if CHECKPOINT_RESTORE && PPC_BOOK3S + select HAVE_ARCH_SOFT_DIRTY if PPC_BOOK3S_64 config PPC_256K_PAGES bool "256k page size" -- cgit v1.2.3 From 78832a88e67b4c5e71926949aff401d2a1241b15 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 15 Jan 2016 14:31:30 +0100 Subject: m68k: Wire up copy_file_range Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/include/asm/unistd.h | 2 +- arch/m68k/include/uapi/asm/unistd.h | 1 + arch/m68k/kernel/syscalltable.S | 1 + 3 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index f9d96bf86910..bafaff6dcd7b 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -4,7 +4,7 @@ #include -#define NR_syscalls 376 +#define NR_syscalls 377 #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_OLD_STAT diff --git a/arch/m68k/include/uapi/asm/unistd.h b/arch/m68k/include/uapi/asm/unistd.h index 36cf129de663..0ca729665f29 100644 --- a/arch/m68k/include/uapi/asm/unistd.h +++ b/arch/m68k/include/uapi/asm/unistd.h @@ -381,5 +381,6 @@ #define __NR_userfaultfd 373 #define __NR_membarrier 374 #define __NR_mlock2 375 +#define __NR_copy_file_range 376 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */ diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index 282cd903f4c4..8bb94261ff97 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -396,3 +396,4 @@ ENTRY(sys_call_table) .long sys_userfaultfd .long sys_membarrier .long sys_mlock2 /* 375 */ + .long sys_copy_file_range -- cgit v1.2.3 From daf670bc9d36ba8b03e010f4bf798bebe08659fe Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 24 Jan 2016 22:39:04 +0100 Subject: m68k/defconfig: Update defconfigs for v4.5-rc1 Signed-off-by: Geert Uytterhoeven --- arch/m68k/configs/amiga_defconfig | 9 +++++++++ arch/m68k/configs/apollo_defconfig | 9 +++++++++ arch/m68k/configs/atari_defconfig | 9 +++++++++ arch/m68k/configs/bvme6000_defconfig | 9 +++++++++ arch/m68k/configs/hp300_defconfig | 9 +++++++++ arch/m68k/configs/mac_defconfig | 9 +++++++++ arch/m68k/configs/multi_defconfig | 9 +++++++++ arch/m68k/configs/mvme147_defconfig | 9 +++++++++ arch/m68k/configs/mvme16x_defconfig | 9 +++++++++ arch/m68k/configs/q40_defconfig | 9 +++++++++ arch/m68k/configs/sun3_defconfig | 9 +++++++++ arch/m68k/configs/sun3x_defconfig | 9 +++++++++ 12 files changed, 108 insertions(+) (limited to 'arch') diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index fc96e814188e..d1fc4796025e 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -108,6 +108,8 @@ CONFIG_NFT_NAT=m CONFIG_NFT_QUEUE=m CONFIG_NFT_REJECT=m CONFIG_NFT_COMPAT=m +CONFIG_NFT_DUP_NETDEV=m +CONFIG_NFT_FWD_NETDEV=m CONFIG_NETFILTER_XT_SET=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m @@ -266,6 +268,12 @@ CONFIG_L2TP=m CONFIG_BRIDGE=m CONFIG_ATALK=m CONFIG_6LOWPAN=m +CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m +CONFIG_6LOWPAN_GHC_UDP=m +CONFIG_6LOWPAN_GHC_ICMPV6=m +CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m +CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m +CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y @@ -366,6 +374,7 @@ CONFIG_ARIADNE=y # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NETRONOME is not set CONFIG_HYDRA=y CONFIG_APNE=y CONFIG_ZORRO8390=y diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index 05c904f08d9d..9bfe8be3658c 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -106,6 +106,8 @@ CONFIG_NFT_NAT=m CONFIG_NFT_QUEUE=m CONFIG_NFT_REJECT=m CONFIG_NFT_COMPAT=m +CONFIG_NFT_DUP_NETDEV=m +CONFIG_NFT_FWD_NETDEV=m CONFIG_NETFILTER_XT_SET=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m @@ -264,6 +266,12 @@ CONFIG_L2TP=m CONFIG_BRIDGE=m CONFIG_ATALK=m CONFIG_6LOWPAN=m +CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m +CONFIG_6LOWPAN_GHC_UDP=m +CONFIG_6LOWPAN_GHC_ICMPV6=m +CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m +CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m +CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y @@ -344,6 +352,7 @@ CONFIG_VETH=m # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NETRONOME is not set # CONFIG_NET_VENDOR_QUALCOMM is not set # CONFIG_NET_VENDOR_RENESAS is not set # CONFIG_NET_VENDOR_ROCKER is not set diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index d572b731c510..ebdcfae55580 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -106,6 +106,8 @@ CONFIG_NFT_NAT=m CONFIG_NFT_QUEUE=m CONFIG_NFT_REJECT=m CONFIG_NFT_COMPAT=m +CONFIG_NFT_DUP_NETDEV=m +CONFIG_NFT_FWD_NETDEV=m CONFIG_NETFILTER_XT_SET=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m @@ -264,6 +266,12 @@ CONFIG_L2TP=m CONFIG_BRIDGE=m CONFIG_ATALK=m CONFIG_6LOWPAN=m +CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m +CONFIG_6LOWPAN_GHC_UDP=m +CONFIG_6LOWPAN_GHC_ICMPV6=m +CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m +CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m +CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y @@ -353,6 +361,7 @@ CONFIG_ATARILANCE=y # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NETRONOME is not set CONFIG_NE2000=y # CONFIG_NET_VENDOR_QUALCOMM is not set # CONFIG_NET_VENDOR_RENESAS is not set diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index 11a30c65ad44..8acc65e54995 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -104,6 +104,8 @@ CONFIG_NFT_NAT=m CONFIG_NFT_QUEUE=m CONFIG_NFT_REJECT=m CONFIG_NFT_COMPAT=m +CONFIG_NFT_DUP_NETDEV=m +CONFIG_NFT_FWD_NETDEV=m CONFIG_NETFILTER_XT_SET=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m @@ -262,6 +264,12 @@ CONFIG_L2TP=m CONFIG_BRIDGE=m CONFIG_ATALK=m CONFIG_6LOWPAN=m +CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m +CONFIG_6LOWPAN_GHC_UDP=m +CONFIG_6LOWPAN_GHC_ICMPV6=m +CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m +CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m +CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y @@ -343,6 +351,7 @@ CONFIG_BVME6000_NET=y # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NETRONOME is not set # CONFIG_NET_VENDOR_QUALCOMM is not set # CONFIG_NET_VENDOR_RENESAS is not set # CONFIG_NET_VENDOR_ROCKER is not set diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 6630a5154b9d..0c6a3d52b26e 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -106,6 +106,8 @@ CONFIG_NFT_NAT=m CONFIG_NFT_QUEUE=m CONFIG_NFT_REJECT=m CONFIG_NFT_COMPAT=m +CONFIG_NFT_DUP_NETDEV=m +CONFIG_NFT_FWD_NETDEV=m CONFIG_NETFILTER_XT_SET=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m @@ -264,6 +266,12 @@ CONFIG_L2TP=m CONFIG_BRIDGE=m CONFIG_ATALK=m CONFIG_6LOWPAN=m +CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m +CONFIG_6LOWPAN_GHC_UDP=m +CONFIG_6LOWPAN_GHC_ICMPV6=m +CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m +CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m +CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y @@ -345,6 +353,7 @@ CONFIG_HPLANCE=y # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NETRONOME is not set # CONFIG_NET_VENDOR_QUALCOMM is not set # CONFIG_NET_VENDOR_RENESAS is not set # CONFIG_NET_VENDOR_ROCKER is not set diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index 1d90b71d0903..12a8a6cb32f4 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -105,6 +105,8 @@ CONFIG_NFT_NAT=m CONFIG_NFT_QUEUE=m CONFIG_NFT_REJECT=m CONFIG_NFT_COMPAT=m +CONFIG_NFT_DUP_NETDEV=m +CONFIG_NFT_FWD_NETDEV=m CONFIG_NETFILTER_XT_SET=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m @@ -266,6 +268,12 @@ CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_6LOWPAN=m +CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m +CONFIG_6LOWPAN_GHC_UDP=m +CONFIG_6LOWPAN_GHC_ICMPV6=m +CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m +CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m +CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y @@ -362,6 +370,7 @@ CONFIG_MAC89x0=y # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set CONFIG_MACSONIC=y +# CONFIG_NET_VENDOR_NETRONOME is not set CONFIG_MAC8390=y # CONFIG_NET_VENDOR_QUALCOMM is not set # CONFIG_NET_VENDOR_RENESAS is not set diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index 1fd21c1ca87f..64ff2dcb34c8 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -115,6 +115,8 @@ CONFIG_NFT_NAT=m CONFIG_NFT_QUEUE=m CONFIG_NFT_REJECT=m CONFIG_NFT_COMPAT=m +CONFIG_NFT_DUP_NETDEV=m +CONFIG_NFT_FWD_NETDEV=m CONFIG_NETFILTER_XT_SET=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m @@ -276,6 +278,12 @@ CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_6LOWPAN=m +CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m +CONFIG_6LOWPAN_GHC_UDP=m +CONFIG_6LOWPAN_GHC_ICMPV6=m +CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m +CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m +CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y @@ -404,6 +412,7 @@ CONFIG_MVME16x_NET=y # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set CONFIG_MACSONIC=y +# CONFIG_NET_VENDOR_NETRONOME is not set CONFIG_HYDRA=y CONFIG_MAC8390=y CONFIG_NE2000=y diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index 74e10f79d7b1..07fc6abcfe0c 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -103,6 +103,8 @@ CONFIG_NFT_NAT=m CONFIG_NFT_QUEUE=m CONFIG_NFT_REJECT=m CONFIG_NFT_COMPAT=m +CONFIG_NFT_DUP_NETDEV=m +CONFIG_NFT_FWD_NETDEV=m CONFIG_NETFILTER_XT_SET=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m @@ -261,6 +263,12 @@ CONFIG_L2TP=m CONFIG_BRIDGE=m CONFIG_ATALK=m CONFIG_6LOWPAN=m +CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m +CONFIG_6LOWPAN_GHC_UDP=m +CONFIG_6LOWPAN_GHC_ICMPV6=m +CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m +CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m +CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y @@ -343,6 +351,7 @@ CONFIG_MVME147_NET=y # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NETRONOME is not set # CONFIG_NET_VENDOR_QUALCOMM is not set # CONFIG_NET_VENDOR_RENESAS is not set # CONFIG_NET_VENDOR_ROCKER is not set diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 7034e716f166..69903ded88f7 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -104,6 +104,8 @@ CONFIG_NFT_NAT=m CONFIG_NFT_QUEUE=m CONFIG_NFT_REJECT=m CONFIG_NFT_COMPAT=m +CONFIG_NFT_DUP_NETDEV=m +CONFIG_NFT_FWD_NETDEV=m CONFIG_NETFILTER_XT_SET=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m @@ -262,6 +264,12 @@ CONFIG_L2TP=m CONFIG_BRIDGE=m CONFIG_ATALK=m CONFIG_6LOWPAN=m +CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m +CONFIG_6LOWPAN_GHC_UDP=m +CONFIG_6LOWPAN_GHC_ICMPV6=m +CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m +CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m +CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y @@ -343,6 +351,7 @@ CONFIG_MVME16x_NET=y # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NETRONOME is not set # CONFIG_NET_VENDOR_QUALCOMM is not set # CONFIG_NET_VENDOR_RENESAS is not set # CONFIG_NET_VENDOR_ROCKER is not set diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index f7deb5f702a6..bd8401686dde 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -104,6 +104,8 @@ CONFIG_NFT_NAT=m CONFIG_NFT_QUEUE=m CONFIG_NFT_REJECT=m CONFIG_NFT_COMPAT=m +CONFIG_NFT_DUP_NETDEV=m +CONFIG_NFT_FWD_NETDEV=m CONFIG_NETFILTER_XT_SET=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m @@ -262,6 +264,12 @@ CONFIG_L2TP=m CONFIG_BRIDGE=m CONFIG_ATALK=m CONFIG_6LOWPAN=m +CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m +CONFIG_6LOWPAN_GHC_UDP=m +CONFIG_6LOWPAN_GHC_ICMPV6=m +CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m +CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m +CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y @@ -352,6 +360,7 @@ CONFIG_VETH=m # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NETRONOME is not set CONFIG_NE2000=y # CONFIG_NET_VENDOR_QUALCOMM is not set # CONFIG_NET_VENDOR_RENESAS is not set diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index 0ce79eb0d805..5f9fb3ab9636 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -101,6 +101,8 @@ CONFIG_NFT_NAT=m CONFIG_NFT_QUEUE=m CONFIG_NFT_REJECT=m CONFIG_NFT_COMPAT=m +CONFIG_NFT_DUP_NETDEV=m +CONFIG_NFT_FWD_NETDEV=m CONFIG_NETFILTER_XT_SET=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m @@ -259,6 +261,12 @@ CONFIG_L2TP=m CONFIG_BRIDGE=m CONFIG_ATALK=m CONFIG_6LOWPAN=m +CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m +CONFIG_6LOWPAN_GHC_UDP=m +CONFIG_6LOWPAN_GHC_ICMPV6=m +CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m +CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m +CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y @@ -340,6 +348,7 @@ CONFIG_SUN3_82586=y # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NETRONOME is not set # CONFIG_NET_VENDOR_QUALCOMM is not set # CONFIG_NET_VENDOR_RENESAS is not set # CONFIG_NET_VENDOR_ROCKER is not set diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index 4cb787e4991f..5d1c674530e2 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -101,6 +101,8 @@ CONFIG_NFT_NAT=m CONFIG_NFT_QUEUE=m CONFIG_NFT_REJECT=m CONFIG_NFT_COMPAT=m +CONFIG_NFT_DUP_NETDEV=m +CONFIG_NFT_FWD_NETDEV=m CONFIG_NETFILTER_XT_SET=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m @@ -259,6 +261,12 @@ CONFIG_L2TP=m CONFIG_BRIDGE=m CONFIG_ATALK=m CONFIG_6LOWPAN=m +CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m +CONFIG_6LOWPAN_GHC_UDP=m +CONFIG_6LOWPAN_GHC_ICMPV6=m +CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m +CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m +CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y @@ -341,6 +349,7 @@ CONFIG_SUN3LANCE=y # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NETRONOME is not set # CONFIG_NET_VENDOR_QUALCOMM is not set # CONFIG_NET_VENDOR_RENESAS is not set # CONFIG_NET_VENDOR_ROCKER is not set -- cgit v1.2.3 From aeb2ee5683e51305aff274d8b0a50af69b3ab310 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Thu, 7 Jan 2016 12:01:59 +0000 Subject: arm64: dts: Add missing DMA Abort interrupt to Juno The DMA-330 has an "irq_abort" interrupt line on which it signals faults separately from the "irq[n:0]" channel interrupts. On Juno, this is wired up to SPI 92; add it to the DT so that DMAC faults are correctly reported for the driver to reset the thing, rather than leaving it locked up and waiting to time out. CC: Liviu Dudau CC: Lorenzo Pieralisi Signed-off-by: Robin Murphy Signed-off-by: Sudeep Holla --- arch/arm64/boot/dts/arm/juno-base.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index dd5158eb5872..e5b59ca9debb 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -115,6 +115,7 @@ , , , + , , , , -- cgit v1.2.3 From 567fdd9d91db09c0af563930253ef9dbb28ddb5b Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 25 Jan 2016 20:33:07 +0900 Subject: ARM: realview: use const and __initconst for smp_operations This newly added code missed the global fixup by commit 75305275a721 ("ARM: use const and __initconst for smp_operations"). So fix it now. Also, add missing "static" qualifier. Signed-off-by: Masahiro Yamada Signed-off-by: Olof Johansson --- arch/arm/mach-realview/platsmp-dt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-realview/platsmp-dt.c b/arch/arm/mach-realview/platsmp-dt.c index 65585392655b..6964e8876061 100644 --- a/arch/arm/mach-realview/platsmp-dt.c +++ b/arch/arm/mach-realview/platsmp-dt.c @@ -80,7 +80,7 @@ static void __init realview_smp_prepare_cpus(unsigned int max_cpus) virt_to_phys(versatile_secondary_startup)); } -struct smp_operations realview_dt_smp_ops __initdata = { +static const struct smp_operations realview_dt_smp_ops __initconst = { .smp_prepare_cpus = realview_smp_prepare_cpus, .smp_secondary_init = versatile_secondary_init, .smp_boot_secondary = versatile_boot_secondary, -- cgit v1.2.3 From c38ac80eb4b0d0c78aad9b8978a3c0da3da01ead Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 25 Jan 2016 20:33:42 +0900 Subject: ARM: tango: use const and __initconst for smp_operations This newly added code missed the global fixup by commit 75305275a721 ("ARM: use const and __initconst for smp_operations"). So fix it now. Signed-off-by: Masahiro Yamada Acked-by: Marc Gonzalez Signed-off-by: Olof Johansson --- arch/arm/mach-tango/platsmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-tango/platsmp.c b/arch/arm/mach-tango/platsmp.c index a18d5a34e2f5..a21f55e000d2 100644 --- a/arch/arm/mach-tango/platsmp.c +++ b/arch/arm/mach-tango/platsmp.c @@ -9,7 +9,7 @@ static int tango_boot_secondary(unsigned int cpu, struct task_struct *idle) return 0; } -static struct smp_operations tango_smp_ops __initdata = { +static const struct smp_operations tango_smp_ops __initconst = { .smp_boot_secondary = tango_boot_secondary, }; -- cgit v1.2.3 From 990591ee39b6e2d0ad1f281a476c62cebbc7ee7c Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 25 Jan 2016 20:40:44 +0900 Subject: ARM: tango: use "depends on" instead of "if" after prompt This platform was recently added, so missed the global fixup by commit e32465429490 ("ARM: use "depends on" for SoC configs instead of "if" after prompt"). Fix it now. Signed-off-by: Masahiro Yamada Acked-by: Marc Gonzalez Signed-off-by: Olof Johansson --- arch/arm/mach-tango/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-tango/Kconfig b/arch/arm/mach-tango/Kconfig index d6a3714b096e..ebe15b93bbe8 100644 --- a/arch/arm/mach-tango/Kconfig +++ b/arch/arm/mach-tango/Kconfig @@ -1,5 +1,6 @@ config ARCH_TANGO - bool "Sigma Designs Tango4 (SMP87xx)" if ARCH_MULTI_V7 + bool "Sigma Designs Tango4 (SMP87xx)" + depends on ARCH_MULTI_V7 # Cortex-A9 MPCore r3p0, PL310 r3p2 select ARCH_HAS_HOLES_MEMORYMODEL select ARM_ERRATA_754322 -- cgit v1.2.3 From c65cd255e4b7dd529b9f35f7e4b05fe154adbb5f Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 25 Jan 2016 20:42:44 +0900 Subject: ARM: realview: use "depends on" instead of "if" after prompt This platform recently moved to multi-platform, so missed the global fixup by commit e32465429490 ("ARM: use "depends on" for SoC configs instead of "if" after prompt"). Fix it now. Signed-off-by: Masahiro Yamada Signed-off-by: Olof Johansson --- arch/arm/mach-realview/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index def40a0dd60c..70ab4a25a5f8 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_REALVIEW - bool "ARM Ltd. RealView family" if ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7 + bool "ARM Ltd. RealView family" + depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7 select ARM_AMBA select ARM_TIMER_SP804 select COMMON_CLK_VERSATILE -- cgit v1.2.3 From 43acf83166eb85082e03b25c9ccd4851e7203ea1 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Mon, 25 Jan 2016 20:25:55 +0000 Subject: ARM64: tegra: Add chosen node for tegra132 norrin The NVIDIA bootloader, nvtboot, expects the "chosen" node to be present in the device-tree blob and if it is not then it fails to boot the kernel. Add the chosen node so we can boot the kernel on Tegra132 Norrin with the nvtboot bootloader. Signed-off-by: Jon Hunter Acked-by: Thierry Reding Signed-off-by: Olof Johansson --- arch/arm64/boot/dts/nvidia/tegra132-norrin.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index 7dfe1c085966..62f33fc84e3e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -12,6 +12,8 @@ rtc1 = "/rtc@0,7000e000"; }; + chosen { }; + memory { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; -- cgit v1.2.3 From f4dce1ffd2e30fa31756876ef502ce6d2324be35 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Mon, 25 Jan 2016 20:32:03 +0000 Subject: MIPS: Fix buffer overflow in syscall_get_arguments() Since commit 4c21b8fd8f14 ("MIPS: seccomp: Handle indirect system calls (o32)"), syscall_get_arguments() attempts to handle o32 indirect syscall arguments by incrementing both the start argument number and the number of arguments to fetch. However only the start argument number needs to be incremented. The number of arguments does not change, they're just shifted up by one, and in fact the output array is provided by the caller and is likely only n entries long, so reading more arguments overflows the output buffer. In the case of seccomp, this results in it fetching 7 arguments starting at the 2nd one, which overflows the unsigned long args[6] in populate_seccomp_data(). This clobbers the $s0 register from syscall_trace_enter() which __seccomp_phase1_filter() saved onto the stack, into which syscall_trace_enter() had placed its syscall number argument. This caused Chromium to crash. Credit goes to Milko for tracking it down as far as $s0 being clobbered. Fixes: 4c21b8fd8f14 ("MIPS: seccomp: Handle indirect system calls (o32)") Reported-by: Milko Leporis Signed-off-by: James Hogan Cc: linux-mips@linux-mips.org Cc: # 3.15- Patchwork: https://patchwork.linux-mips.org/patch/12213/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/syscall.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/syscall.h b/arch/mips/include/asm/syscall.h index 6499d93ae68d..47bc45a67e9b 100644 --- a/arch/mips/include/asm/syscall.h +++ b/arch/mips/include/asm/syscall.h @@ -101,10 +101,8 @@ static inline void syscall_get_arguments(struct task_struct *task, /* O32 ABI syscall() - Either 64-bit with O32 or 32-bit */ if ((config_enabled(CONFIG_32BIT) || test_tsk_thread_flag(task, TIF_32BIT_REGS)) && - (regs->regs[2] == __NR_syscall)) { + (regs->regs[2] == __NR_syscall)) i++; - n++; - } while (n--) ret |= mips_get_syscall_arg(args++, task, regs, i++); -- cgit v1.2.3 From 76e5846d3bdf59eb1010d5607003da2dc3910bb1 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Mon, 1 Feb 2016 13:50:36 +0000 Subject: MIPS: Properly disable FPU in start_thread() start_thread() (called for execve(2)) clears the TIF_USEDFPU flag without atomically disabling the FPU. With a preemptive kernel, an unfortunately timed preemption after this could result in another task (or KVM guest) being scheduled in with the FPU still enabled, since lose_fpu_inatomic() only turns it off if TIF_USEDFPU is set. Use lose_fpu(0) instead of the separate FPU / MSA management, which should do the right thing (drop FPU properly and atomically without saving state) and will be more future proof. Signed-off-by: James Hogan Reviewed-by: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12302/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/process.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index f2975d4d1e44..eddd5fd6fdfa 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -65,12 +65,10 @@ void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp) status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|ST0_FR|KU_MASK); status |= KU_USER; regs->cp0_status = status; + lose_fpu(0); + clear_thread_flag(TIF_MSA_CTX_LIVE); clear_used_math(); - clear_fpu_owner(); init_dsp(); - clear_thread_flag(TIF_USEDMSA); - clear_thread_flag(TIF_MSA_CTX_LIVE); - disable_msa(); regs->cp0_epc = pc; regs->regs[29] = sp; } -- cgit v1.2.3 From 00fe56dca6a845d5f10ef0398eef26e559e8f98c Mon Sep 17 00:00:00 2001 From: James Hogan Date: Mon, 1 Feb 2016 13:50:37 +0000 Subject: MIPS: Fix FPU disable with preemption The FPU should not be left enabled after a task context switch. This isn't usually a problem as the FPU enable bit is updated before returning to userland, however it can potentially mask kernel bugs, and in fact KVM assumes it won't happen and won't clear the FPU enable bit before returning to the guest, which allows the guest to use stale FPU context. Interrupts and exceptions save and restore most bits of the CP0 Status register which contains the FPU enable bit (CU1). When the kernel needs to enable or disable the FPU (for example due to attempted FPU use by userland, or the scheduler being invoked) both the actual Status register and the saved value in the userland context are updated. However this doesn't work correctly with full kernel preemption enabled, since the FPU enable bit can be cleared from within an interrupt when the scheduler is invoked, and only the userland context is updated, not the interrupt context. For example: 1) Enter kernel with FPU already enabled, TIF_USEDFPU=1, Status.CU1=1 saved. 2) Take a timer interrupt while in kernel mode, Status.CU1=1 saved. 3) Timer interrupt invokes scheduler to preempt the task, which clears TIF_USEDFPU, disables the FPU in Status register (Status.CU1=0), and the value stored in user context from step (1), but not the interrupt context from step (2). 4) When the process is scheduled back in again Status.CU1=0. 5) The interrupt context from step (2) is restored, which sets Status.CU1=1. So from user context point of view, preemption has re-enabled FPU! 6) If the scheduler is invoked again (via preemption or voluntarily) before returning to userland, TIF_USEDFPU=0 so the FPU is not disabled before the task context switch. 7) The next task resumes from the context switch with FPU enabled! The restoring of the Status register on return from interrupt/exception is already selective about which bits to restore, leaving the interrupt mask bits alone so enabling/disabling of CPU interrupt lines can persist. Extend this to also leave both the CU1 bit (FPU enable) and the FR bit (which specifies the FPU mode and gets changed with CU1). This prevents a stale Status value being restored in step (5) above and persisting through subsequent context switches. Also switch to the use of definitions from asm/mipsregs.h while we're at it. Since this change also affects the restoration of Status register on the path back to userland, it increases the sensitivity of the kernel to the problem of the FPU being left enabled, allowing it to propagate to userland, therefore a warning is also added to lose_fpu_inatomic() to point out any future reoccurances before they do any damage. Signed-off-by: James Hogan Reviewed-by: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12303/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/fpu.h | 4 ++++ arch/mips/include/asm/stackframe.h | 4 ++-- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h index 9cbf383b8834..f06f97bd62df 100644 --- a/arch/mips/include/asm/fpu.h +++ b/arch/mips/include/asm/fpu.h @@ -179,6 +179,10 @@ static inline void lose_fpu_inatomic(int save, struct task_struct *tsk) if (save) _save_fp(tsk); __disable_fpu(); + } else { + /* FPU should not have been left enabled with no owner */ + WARN(read_c0_status() & ST0_CU1, + "Orphaned FPU left enabled"); } KSTK_STATUS(tsk) &= ~ST0_CU1; clear_tsk_thread_flag(tsk, TIF_USEDFPU); diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h index a71da576883c..eebf39549606 100644 --- a/arch/mips/include/asm/stackframe.h +++ b/arch/mips/include/asm/stackframe.h @@ -289,7 +289,7 @@ .set reorder .set noat mfc0 a0, CP0_STATUS - li v1, 0xff00 + li v1, ST0_CU1 | ST0_IM ori a0, STATMASK xori a0, STATMASK mtc0 a0, CP0_STATUS @@ -330,7 +330,7 @@ ori a0, STATMASK xori a0, STATMASK mtc0 a0, CP0_STATUS - li v1, 0xff00 + li v1, ST0_CU1 | ST0_FR | ST0_IM and a0, v1 LONG_L v0, PT_STATUS(sp) nor v1, $0, v1 -- cgit v1.2.3 From 10f6d99f0fb186bbca1e9e2905d0d3693f941396 Mon Sep 17 00:00:00 2001 From: Maciej W. Rozycki Date: Sat, 30 Jan 2016 09:08:16 +0000 Subject: MIPS: traps.c: Don't emulate RDHWR in the CpU #0 exception handler In the regular MIPS instruction set RDHWR is encoded with the SPECIAL3 (011111) major opcode. Therefore it cannot trigger the CpU (Coprocessor Unusable) exception, and certainly not for coprocessor 0, as the opcode does not overlap with any of the older ISA reservations, i.e. LWC0 (110000), SWC0 (111000), LDC0 (110100) or SDC0 (111100). The closest match might be SDC3 (111111), possibly causing a CpU #3 exception, however our code does not handle it anyway. A quick check with a MIPS I and a MIPS III processor: CPU0 revision is: 00000220 (R3000) CPU0 revision is: 00000440 (R4400SC) indeed indicates that the RI (Reserved Instruction) exception is triggered. It's only LL and SC that require emulation in the CpU #0 exception handler as they reuse the LWC0 and SWC0 opcodes respectively. In the microMIPS instruction set RDHWR is mandatory and triggering the RI exception is required on unimplemented or disabled register accesses. Therefore emulating the microMIPS instruction in the CpU #0 exception handler is not required either. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12280/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index bafcb7ad5c85..485b0d517177 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1369,26 +1369,12 @@ asmlinkage void do_cpu(struct pt_regs *regs) if (unlikely(compute_return_epc(regs) < 0)) break; - if (get_isa16_mode(regs->cp0_epc)) { - unsigned short mmop[2] = { 0 }; - - if (unlikely(get_user(mmop[0], epc) < 0)) - status = SIGSEGV; - if (unlikely(get_user(mmop[1], epc) < 0)) - status = SIGSEGV; - opcode = (mmop[0] << 16) | mmop[1]; - - if (status < 0) - status = simulate_rdhwr_mm(regs, opcode); - } else { + if (!get_isa16_mode(regs->cp0_epc)) { if (unlikely(get_user(opcode, epc) < 0)) status = SIGSEGV; if (!cpu_has_llsc && status < 0) status = simulate_llsc(regs, opcode); - - if (status < 0) - status = simulate_rdhwr_normal(regs, opcode); } if (status < 0) -- cgit v1.2.3 From 7aa7047100113ec9f5e4e685f94223825bd74a7b Mon Sep 17 00:00:00 2001 From: Maciej W. Rozycki Date: Sat, 30 Jan 2016 09:08:28 +0000 Subject: MIPS: traps.c: Correct microMIPS RDHWR emulation Fix the code to fetch and decode the whole 32-bit instruction. This only really matters with the `noulri' kernel parameter as all microMIPS processors are supposed to have all the hardware registers we support. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12281/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 485b0d517177..ae790c575d4f 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -663,7 +663,7 @@ static int simulate_rdhwr_normal(struct pt_regs *regs, unsigned int opcode) return -1; } -static int simulate_rdhwr_mm(struct pt_regs *regs, unsigned short opcode) +static int simulate_rdhwr_mm(struct pt_regs *regs, unsigned int opcode) { if ((opcode & MM_POOL32A_FUNC) == MM_RDHWR) { int rd = (opcode & MM_RS) >> 16; @@ -1119,11 +1119,12 @@ no_r2_instr: if (get_isa16_mode(regs->cp0_epc)) { unsigned short mmop[2] = { 0 }; - if (unlikely(get_user(mmop[0], epc) < 0)) + if (unlikely(get_user(mmop[0], (u16 __user *)epc + 0) < 0)) status = SIGSEGV; - if (unlikely(get_user(mmop[1], epc) < 0)) + if (unlikely(get_user(mmop[1], (u16 __user *)epc + 1) < 0)) status = SIGSEGV; - opcode = (mmop[0] << 16) | mmop[1]; + opcode = mmop[0]; + opcode = (opcode << 16) | mmop[1]; if (status < 0) status = simulate_rdhwr_mm(regs, opcode); -- cgit v1.2.3 From 95f5c80050ad723163aa80dc8bffd48ef4afc6d5 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 27 Jan 2016 10:50:19 +0100 Subject: arm64: allow vmalloc regions to be set with set_memory_* The range of set_memory_* is currently restricted to the module address range because of difficulties in breaking down larger block sizes. vmalloc maps PAGE_SIZE pages so it is safe to use as well. Update the function ranges and add a comment explaining why the range is restricted the way it is. Suggested-by: Laura Abbott Acked-by: Mark Rutland Signed-off-by: Ard Biesheuvel Signed-off-by: Will Deacon --- arch/arm64/mm/pageattr.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c index cf6240741134..0795c3a36d8f 100644 --- a/arch/arm64/mm/pageattr.c +++ b/arch/arm64/mm/pageattr.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -44,6 +45,7 @@ static int change_memory_common(unsigned long addr, int numpages, unsigned long end = start + size; int ret; struct page_change_data data; + struct vm_struct *area; if (!PAGE_ALIGNED(addr)) { start &= PAGE_MASK; @@ -51,10 +53,23 @@ static int change_memory_common(unsigned long addr, int numpages, WARN_ON_ONCE(1); } - if (start < MODULES_VADDR || start >= MODULES_END) - return -EINVAL; - - if (end < MODULES_VADDR || end >= MODULES_END) + /* + * Kernel VA mappings are always live, and splitting live section + * mappings into page mappings may cause TLB conflicts. This means + * we have to ensure that changing the permission bits of the range + * we are operating on does not result in such splitting. + * + * Let's restrict ourselves to mappings created by vmalloc (or vmap). + * Those are guaranteed to consist entirely of page mappings, and + * splitting is never needed. + * + * So check whether the [addr, addr + size) interval is entirely + * covered by precisely one VM area that has the VM_ALLOC flag set. + */ + area = find_vm_area((void *)addr); + if (!area || + end > (unsigned long)area->addr + area->size || + !(area->flags & VM_ALLOC)) return -EINVAL; if (!numpages) -- cgit v1.2.3 From 811d61e384e24759372bb3f01772f3744b0a8327 Mon Sep 17 00:00:00 2001 From: James Morse Date: Tue, 2 Feb 2016 15:53:59 +0000 Subject: arm64: futex.h: Add missing PAN toggling futex.h's futex_atomic_cmpxchg_inatomic() does not use the __futex_atomic_op() macro and needs its own PAN toggling. This was missed when the feature was implemented. Fixes: 338d4f49d6f ("arm64: kernel: Add support for Privileged Access Never") Signed-off-by: James Morse Signed-off-by: Will Deacon --- arch/arm64/include/asm/futex.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm64/include/asm/futex.h b/arch/arm64/include/asm/futex.h index 007a69fc4f40..5f3ab8c1db55 100644 --- a/arch/arm64/include/asm/futex.h +++ b/arch/arm64/include/asm/futex.h @@ -121,6 +121,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, return -EFAULT; asm volatile("// futex_atomic_cmpxchg_inatomic\n" +ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN, CONFIG_ARM64_PAN) " prfm pstl1strm, %2\n" "1: ldxr %w1, %2\n" " sub %w3, %w1, %w4\n" @@ -137,6 +138,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, " .align 3\n" " .quad 1b, 4b, 2b, 4b\n" " .popsection\n" +ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN) : "+r" (ret), "=&r" (val), "+Q" (*uaddr), "=&r" (tmp) : "r" (oldval), "r" (newval), "Ir" (-EFAULT) : "memory"); -- cgit v1.2.3 From 74c81ecdc0e37b917d7c6358ed72dc8337d8900f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 3 Feb 2016 10:32:22 +0100 Subject: MIPS: R6000: Don't allow 64k pages for R6000. The R6000 does not support 64k pages. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 57a945e832f4..74a3db92da1b 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -2085,7 +2085,7 @@ config PAGE_SIZE_32KB config PAGE_SIZE_64KB bool "64kB" - depends on !CPU_R3000 && !CPU_TX39XX + depends on !CPU_R3000 && !CPU_TX39XX && !CPU_R6000 help Using 64kB page size will result in higher performance kernel at the price of higher memory consumption. This option is available on -- cgit v1.2.3 From 3e275c64a973ba1554ef87f76c9f0f5b5221ab14 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 28 Jan 2016 12:18:28 +0000 Subject: arm64: asm: Explicitly include linux/personality.h in asm/page.h asm/page.h uses READ_IMPLIES_EXEC from linux/personality.h but does not explicitly include it causing build failures in -next where whatever was causing it to be implicitly included has changed to remove that inclusion. Add an explicit inclusion to fix this. Signed-off-by: Mark Brown [will: moved #include inside #ifndef __ASSEMBLY__ block] Signed-off-by: Will Deacon --- arch/arm64/include/asm/page.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/include/asm/page.h b/arch/arm64/include/asm/page.h index 9b2f5a9d019d..ae615b9d9a55 100644 --- a/arch/arm64/include/asm/page.h +++ b/arch/arm64/include/asm/page.h @@ -39,6 +39,7 @@ #ifndef __ASSEMBLY__ +#include /* for READ_IMPLIES_EXEC */ #include extern void __cpu_clear_user_page(void *p, unsigned long user); -- cgit v1.2.3 From d7de413475f443957a0c1d256e405d19b3a2cb22 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 4 Feb 2016 01:24:40 +0100 Subject: MIPS: Fix 64k page support for 32 bit kernels. TASK_SIZE was defined as 0x7fff8000UL which for 64k pages is not a multiple of the page size. Somewhere further down the math fails such that executing an ELF binary fails. Signed-off-by: Ralf Baechle Tested-by: Joshua Henderson --- arch/mips/include/asm/processor.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h index 3f832c3dd8f5..041153f5cf93 100644 --- a/arch/mips/include/asm/processor.h +++ b/arch/mips/include/asm/processor.h @@ -45,7 +45,7 @@ extern unsigned int vced_count, vcei_count; * User space process size: 2GB. This is hardcoded into a few places, * so don't change it unless you know what you are doing. */ -#define TASK_SIZE 0x7fff8000UL +#define TASK_SIZE 0x80000000UL #endif #define STACK_TOP_MAX TASK_SIZE -- cgit v1.2.3 From 418d5516568b3fdbc4e7b53677dd78aed8514565 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 1 Feb 2016 14:18:57 +0100 Subject: ARM: nomadik: fix up SD/MMC DT settings The DTSI file for the Nomadik does not properly specify how the PL180 levelshifter is connected: the Nomadik actually needs all the five st,sig-dir-* flags set to properly control all lines out. Further this board supports full power cycling of the card, and since this variant has no hardware clock gating, it needs a ridiculously low frequency setting to keep up with the ever overflowing FIFO. The pin configuration set-up is a bit of a mystery, because of course these pins are a mix of inputs and outputs. However the reference implementation sets all pins to "output" with unspecified initial value, so let's do that here as well. Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij Acked-by: Ulf Hansson Signed-off-by: Olof Johansson --- arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 37 ++++++++++++++++-------------- 1 file changed, 20 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index d0c743853318..27a333eb8987 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -127,22 +127,14 @@ }; mmcsd_default_mode: mmcsd_default { mmcsd_default_cfg1 { - /* MCCLK */ - pins = "GPIO8_B10"; - ste,output = <0>; - }; - mmcsd_default_cfg2 { - /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */ - pins = "GPIO10_C11", "GPIO15_A12", - "GPIO16_C13", "GPIO23_D15"; - ste,output = <1>; - }; - mmcsd_default_cfg3 { - /* MCCMD, MCDAT3-0, MCMSFBCLK */ - pins = "GPIO9_A10", "GPIO11_B11", - "GPIO12_A11", "GPIO13_C12", - "GPIO14_B12", "GPIO24_C15"; - ste,input = <1>; + /* + * MCCLK, MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 + * MCCMD, MCDAT3-0, MCMSFBCLK + */ + pins = "GPIO8_B10", "GPIO9_A10", "GPIO10_C11", "GPIO11_B11", + "GPIO12_A11", "GPIO13_C12", "GPIO14_B12", "GPIO15_A12", + "GPIO16_C13", "GPIO23_D15", "GPIO24_C15"; + ste,output = <2>; }; }; }; @@ -802,10 +794,21 @@ clock-names = "mclk", "apb_pclk"; interrupt-parent = <&vica>; interrupts = <22>; - max-frequency = <48000000>; + max-frequency = <400000>; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; + full-pwr-cycle; + /* + * The STw4811 circuit used with the Nomadik strictly + * requires that all of these signal direction pins be + * routed and used for its 4-bit levelshifter. + */ + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-dir-dat31; + st,sig-dir-cmd; + st,sig-pin-fbclk; pinctrl-names = "default"; pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>; vmmc-supply = <&vmmc_regulator>; -- cgit v1.2.3 From 381a65c21aa1fcf4f3fafe70027b79b303bdb71d Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Wed, 3 Feb 2016 11:03:06 -0600 Subject: ARM: multi_v7_defconfig: enable DW_WATCHDOG The watchdog timer on the SoCFPGA platform is the Synopsys Designware watchdog. Enable CONFIG_DW_WATCHDOG for the driver to get built. Signed-off-by: Dinh Nguyen Tested-by: Kevin Hilman Signed-off-by: Olof Johansson --- arch/arm/configs/multi_v7_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 314f6be2dca2..8e8b2ace9b7c 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -426,6 +426,7 @@ CONFIG_SUNXI_WATCHDOG=y CONFIG_IMX2_WDT=y CONFIG_TEGRA_WATCHDOG=m CONFIG_MESON_WATCHDOG=y +CONFIG_DW_WATCHDOG=y CONFIG_DIGICOLOR_WATCHDOG=y CONFIG_MFD_AS3711=y CONFIG_MFD_AS3722=y -- cgit v1.2.3 From 75edb54a1dea5ea1c8d3d82e27dc9ee3070f5935 Mon Sep 17 00:00:00 2001 From: Dmitry Vyukov Date: Thu, 4 Feb 2016 16:27:50 +0100 Subject: x86: Fix KASAN false positives in thread_saved_pc() thread_saved_pc() reads stack of a potentially running task. This can cause false KASAN stack-out-of-bounds reports, because the running task concurrently poisons and unpoisons own stack. The same happens in get_wchan(), and get get_wchan() was fixed by using READ_ONCE_NOCHECK(). Do the same here. Example KASAN report triggered by sysrq-t: BUG: KASAN: out-of-bounds in sched_show_task+0x306/0x3b0 at addr ffff880043c97c18 Read of size 8 by task syz-executor/23839 [...] page dumped because: kasan: bad access detected [...] Call Trace: [] __asan_report_load8_noabort+0x3e/0x40 [] sched_show_task+0x306/0x3b0 [] show_state_filter+0x124/0x1a0 [] fn_show_state+0x10/0x20 [] k_spec+0xa8/0xe0 [] kbd_event+0xb9f/0x4000 [] input_to_handler+0x3a7/0x4b0 [] input_pass_values.part.5+0x554/0x6b0 [] input_handle_event+0x2ac/0x1070 [] input_inject_event+0x237/0x280 [] evdev_write+0x478/0x680 [] __vfs_write+0x113/0x480 [] vfs_write+0x167/0x4a0 [] SyS_write+0x111/0x220 Signed-off-by: Dmitry Vyukov Acked-by: Andrey Ryabinin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: glider@google.com Cc: kasan-dev@googlegroups.com Cc: kcc@google.com Cc: linux-kernel@vger.kernel.org Cc: ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/processor.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index 2d5a50cb61a2..20c11d1aa4cc 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -766,7 +766,7 @@ extern unsigned long thread_saved_pc(struct task_struct *tsk); * Return saved PC of a blocked thread. * What is this good for? it will be always the scheduler or ret_from_fork. */ -#define thread_saved_pc(t) (*(unsigned long *)((t)->thread.sp - 8)) +#define thread_saved_pc(t) READ_ONCE_NOCHECK(*(unsigned long *)((t)->thread.sp - 8)) #define task_pt_regs(tsk) ((struct pt_regs *)(tsk)->thread.sp0 - 1) extern unsigned long KSTK_ESP(struct task_struct *task); -- cgit v1.2.3 From 320549a22484952d88d4e0320218765b16cd2174 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 5 Feb 2016 11:22:04 +0000 Subject: regmap: mmio: Revert to v4.4 endianness handling Commit 29bb45f25ff3 (regmap-mmio: Use native endianness for read/write) attempted to fix some long standing bugs in the MMIO implementation for big endian systems caused by duplicate byte swapping in both regmap and readl()/writel() which affected MIPS systems as when they are in big endian mode they flip the endianness of all registers in the system, not just the CPU. MIPS systems had worked around this by declaring regmap using IPs as little endian which is inaccurate, unfortunately the issue had not been reported. Sadly the fix makes things worse rather than better. By changing the behaviour to match the documentation it caused behaviour changes for other IPs which broke them and by using the __raw I/O accessors to avoid the endianness swapping in readl()/writel() it removed some memory ordering guarantees and could potentially generate unvirtualisable instructions on some architectures. Unfortunately sorting out all this mess in any half way sensible fashion was far too invasive to go in during an -rc cycle so instead let's go back to the old broken behaviour for v4.5, the better fixes are already queued for v4.6. This does mean that we keep the broken MIPS DTs for another release but that seems the least bad way of handling the situation. Reported-by: Johannes Berg Signed-off-by: Mark Brown --- arch/mips/boot/dts/brcm/bcm6328.dtsi | 1 + arch/mips/boot/dts/brcm/bcm7125.dtsi | 1 + arch/mips/boot/dts/brcm/bcm7346.dtsi | 1 + arch/mips/boot/dts/brcm/bcm7358.dtsi | 1 + arch/mips/boot/dts/brcm/bcm7360.dtsi | 1 + arch/mips/boot/dts/brcm/bcm7362.dtsi | 1 + arch/mips/boot/dts/brcm/bcm7420.dtsi | 1 + arch/mips/boot/dts/brcm/bcm7425.dtsi | 1 + arch/mips/boot/dts/brcm/bcm7435.dtsi | 1 + drivers/base/regmap/regmap-mmio.c | 16 ++++++++-------- 10 files changed, 17 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/mips/boot/dts/brcm/bcm6328.dtsi b/arch/mips/boot/dts/brcm/bcm6328.dtsi index 459b9b252c3b..d61b1616b604 100644 --- a/arch/mips/boot/dts/brcm/bcm6328.dtsi +++ b/arch/mips/boot/dts/brcm/bcm6328.dtsi @@ -74,6 +74,7 @@ timer: timer@10000040 { compatible = "syscon"; reg = <0x10000040 0x2c>; + little-endian; }; reboot { diff --git a/arch/mips/boot/dts/brcm/bcm7125.dtsi b/arch/mips/boot/dts/brcm/bcm7125.dtsi index 4fc7ecee273c..1a7efa883c5e 100644 --- a/arch/mips/boot/dts/brcm/bcm7125.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7125.dtsi @@ -98,6 +98,7 @@ sun_top_ctrl: syscon@404000 { compatible = "brcm,bcm7125-sun-top-ctrl", "syscon"; reg = <0x404000 0x60c>; + little-endian; }; reboot { diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi index a3039bb53477..d4bf52cfcf17 100644 --- a/arch/mips/boot/dts/brcm/bcm7346.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi @@ -118,6 +118,7 @@ sun_top_ctrl: syscon@404000 { compatible = "brcm,bcm7346-sun-top-ctrl", "syscon"; reg = <0x404000 0x51c>; + little-endian; }; reboot { diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi index 4274ff41ec21..8e2501694d03 100644 --- a/arch/mips/boot/dts/brcm/bcm7358.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi @@ -112,6 +112,7 @@ sun_top_ctrl: syscon@404000 { compatible = "brcm,bcm7358-sun-top-ctrl", "syscon"; reg = <0x404000 0x51c>; + little-endian; }; reboot { diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi index 0dcc9163c27b..7e5f76040fb8 100644 --- a/arch/mips/boot/dts/brcm/bcm7360.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi @@ -112,6 +112,7 @@ sun_top_ctrl: syscon@404000 { compatible = "brcm,bcm7360-sun-top-ctrl", "syscon"; reg = <0x404000 0x51c>; + little-endian; }; reboot { diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi index 2f3f9fc2c478..c739ea77acb0 100644 --- a/arch/mips/boot/dts/brcm/bcm7362.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi @@ -118,6 +118,7 @@ sun_top_ctrl: syscon@404000 { compatible = "brcm,bcm7362-sun-top-ctrl", "syscon"; reg = <0x404000 0x51c>; + little-endian; }; reboot { diff --git a/arch/mips/boot/dts/brcm/bcm7420.dtsi b/arch/mips/boot/dts/brcm/bcm7420.dtsi index bee221b3b568..5f55d0a50a28 100644 --- a/arch/mips/boot/dts/brcm/bcm7420.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7420.dtsi @@ -99,6 +99,7 @@ sun_top_ctrl: syscon@404000 { compatible = "brcm,bcm7420-sun-top-ctrl", "syscon"; reg = <0x404000 0x60c>; + little-endian; }; reboot { diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi index 571f30f52e3f..e24d41ab4e30 100644 --- a/arch/mips/boot/dts/brcm/bcm7425.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi @@ -100,6 +100,7 @@ sun_top_ctrl: syscon@404000 { compatible = "brcm,bcm7425-sun-top-ctrl", "syscon"; reg = <0x404000 0x51c>; + little-endian; }; reboot { diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi b/arch/mips/boot/dts/brcm/bcm7435.dtsi index 614ee211f71a..8b9432cc062b 100644 --- a/arch/mips/boot/dts/brcm/bcm7435.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi @@ -114,6 +114,7 @@ sun_top_ctrl: syscon@404000 { compatible = "brcm,bcm7425-sun-top-ctrl", "syscon"; reg = <0x404000 0x51c>; + little-endian; }; reboot { diff --git a/drivers/base/regmap/regmap-mmio.c b/drivers/base/regmap/regmap-mmio.c index 8812bfb9e3b8..eea51569f0eb 100644 --- a/drivers/base/regmap/regmap-mmio.c +++ b/drivers/base/regmap/regmap-mmio.c @@ -133,17 +133,17 @@ static int regmap_mmio_gather_write(void *context, while (val_size) { switch (ctx->val_bytes) { case 1: - __raw_writeb(*(u8 *)val, ctx->regs + offset); + writeb(*(u8 *)val, ctx->regs + offset); break; case 2: - __raw_writew(*(u16 *)val, ctx->regs + offset); + writew(*(u16 *)val, ctx->regs + offset); break; case 4: - __raw_writel(*(u32 *)val, ctx->regs + offset); + writel(*(u32 *)val, ctx->regs + offset); break; #ifdef CONFIG_64BIT case 8: - __raw_writeq(*(u64 *)val, ctx->regs + offset); + writeq(*(u64 *)val, ctx->regs + offset); break; #endif default: @@ -193,17 +193,17 @@ static int regmap_mmio_read(void *context, while (val_size) { switch (ctx->val_bytes) { case 1: - *(u8 *)val = __raw_readb(ctx->regs + offset); + *(u8 *)val = readb(ctx->regs + offset); break; case 2: - *(u16 *)val = __raw_readw(ctx->regs + offset); + *(u16 *)val = readw(ctx->regs + offset); break; case 4: - *(u32 *)val = __raw_readl(ctx->regs + offset); + *(u32 *)val = readl(ctx->regs + offset); break; #ifdef CONFIG_64BIT case 8: - *(u64 *)val = __raw_readq(ctx->regs + offset); + *(u64 *)val = readq(ctx->regs + offset); break; #endif default: -- cgit v1.2.3 From e6c058f9b2700a720d3fad0f6caad1d030c533ee Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 5 Feb 2016 17:15:42 +0100 Subject: MIPS: Wire up copy_file_range syscall. Signed-off-by: Ralf Baechle --- arch/mips/include/uapi/asm/unistd.h | 15 +++++++++------ arch/mips/kernel/scall32-o32.S | 1 + arch/mips/kernel/scall64-64.S | 1 + arch/mips/kernel/scall64-n32.S | 1 + arch/mips/kernel/scall64-o32.S | 1 + 5 files changed, 13 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h index 90f03a7da665..3129795de940 100644 --- a/arch/mips/include/uapi/asm/unistd.h +++ b/arch/mips/include/uapi/asm/unistd.h @@ -380,16 +380,17 @@ #define __NR_userfaultfd (__NR_Linux + 357) #define __NR_membarrier (__NR_Linux + 358) #define __NR_mlock2 (__NR_Linux + 359) +#define __NR_copy_file_range (__NR_Linux + 360) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 359 +#define __NR_Linux_syscalls 360 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 359 +#define __NR_O32_Linux_syscalls 360 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -717,16 +718,17 @@ #define __NR_userfaultfd (__NR_Linux + 317) #define __NR_membarrier (__NR_Linux + 318) #define __NR_mlock2 (__NR_Linux + 319) +#define __NR_copy_file_range (__NR_Linux + 320) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 319 +#define __NR_Linux_syscalls 320 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 319 +#define __NR_64_Linux_syscalls 320 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -1058,15 +1060,16 @@ #define __NR_userfaultfd (__NR_Linux + 321) #define __NR_membarrier (__NR_Linux + 322) #define __NR_mlock2 (__NR_Linux + 323) +#define __NR_copy_file_range (__NR_Linux + 324) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 323 +#define __NR_Linux_syscalls 324 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 323 +#define __NR_N32_Linux_syscalls 324 #endif /* _UAPI_ASM_UNISTD_H */ diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 2d23c834ba96..a56317444bda 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -595,3 +595,4 @@ EXPORT(sys_call_table) PTR sys_userfaultfd PTR sys_membarrier PTR sys_mlock2 + PTR sys_copy_file_range /* 4360 */ diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index deac63315d0e..2b2dc14610d0 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -433,4 +433,5 @@ EXPORT(sys_call_table) PTR sys_userfaultfd PTR sys_membarrier PTR sys_mlock2 + PTR sys_copy_file_range /* 5320 */ .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 5a69eb48d0a8..2bf5c8593d91 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -423,4 +423,5 @@ EXPORT(sysn32_call_table) PTR sys_userfaultfd PTR sys_membarrier PTR sys_mlock2 + PTR sys_copy_file_range .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index e4b6d7c97822..c5b759e584c7 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -578,4 +578,5 @@ EXPORT(sys32_call_table) PTR sys_userfaultfd PTR sys_membarrier PTR sys_mlock2 + PTR sys_copy_file_range /* 4360 */ .size sys32_call_table,.-sys32_call_table -- cgit v1.2.3 From af1ddcb5c63cfb9744c29e88db0bab6bb25ad76b Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Fri, 5 Feb 2016 15:36:10 -0800 Subject: m32r: fix build failure due to SMP and MMU One of the randconfig build failed with the error: arch/m32r/kernel/smp.c: In function 'smp_flush_tlb_mm': arch/m32r/kernel/smp.c:283:20: error: subscripted value is neither array nor pointer nor vector mmc = &mm->context[cpu_id]; ^ arch/m32r/kernel/smp.c: In function 'smp_flush_tlb_page': arch/m32r/kernel/smp.c:353:20: error: subscripted value is neither array nor pointer nor vector mmc = &mm->context[cpu_id]; ^ arch/m32r/kernel/smp.c: In function 'smp_invalidate_interrupt': arch/m32r/kernel/smp.c:479:41: error: subscripted value is neither array nor pointer nor vector unsigned long *mmc = &flush_mm->context[cpu_id]; It turned out that CONFIG_SMP was defined but CONFIG_MMU was not defined. But arch/m32r/include/asm/mmu.h only defines mm_context_t as an array when both CONFIG_SMP and CONFIG_MMU are defined. And arch/m32r/kernel/smp.c is always using context as an array. So without MMU SMP can not work. Signed-off-by: Sudip Mukherjee Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m32r/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 836ac5a963c8..2841c0a3fd3b 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -276,6 +276,7 @@ source "kernel/Kconfig.preempt" config SMP bool "Symmetric multi-processing support" + depends on MMU ---help--- This enables support for systems with more than one CPU. If you have a system with only one CPU, say N. If you have a system with more -- cgit v1.2.3 From 080fe2068e1c7f19f565b30b78baf78edf16a980 Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Fri, 5 Feb 2016 15:36:41 -0800 Subject: mm, hugetlb: don't require CMA for runtime gigantic pages Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation at runtime") has added the runtime gigantic page allocation via alloc_contig_range(), making this support available only when CONFIG_CMA is enabled. Because it doesn't depend on MIGRATE_CMA pageblocks and the associated infrastructure, it is possible with few simple adjustments to require only CONFIG_MEMORY_ISOLATION instead of full CONFIG_CMA. After this patch, alloc_contig_range() and related functions are available and used for gigantic pages with just CONFIG_MEMORY_ISOLATION enabled. Note CONFIG_CMA selects CONFIG_MEMORY_ISOLATION. This allows supporting runtime gigantic pages without the CMA-specific checks in page allocator fastpaths. Signed-off-by: Vlastimil Babka Cc: Luiz Capitulino Cc: Kirill A. Shutemov Cc: Zhang Yanfei Cc: Yasuaki Ishimatsu Cc: Joonsoo Kim Cc: Naoya Horiguchi Cc: Mel Gorman Cc: Davidlohr Bueso Cc: Hillf Danton Cc: Mike Kravetz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/mm/hugetlbpage.c | 4 ++-- include/linux/gfp.h | 6 +++--- mm/hugetlb.c | 2 +- mm/page_alloc.c | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index 42982b26e32b..740d7ac03a55 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -173,10 +173,10 @@ static __init int setup_hugepagesz(char *opt) } __setup("hugepagesz=", setup_hugepagesz); -#ifdef CONFIG_CMA +#if (defined(CONFIG_MEMORY_ISOLATION) && defined(CONFIG_COMPACTION)) || defined(CONFIG_CMA) static __init int gigantic_pages_init(void) { - /* With CMA we can allocate gigantic pages at runtime */ + /* With compaction or CMA we can allocate gigantic pages at runtime */ if (cpu_has_gbpages && !size_to_hstate(1UL << PUD_SHIFT)) hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT); return 0; diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 28ad5f6494b0..af1f2b24bbe4 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -547,16 +547,16 @@ static inline bool pm_suspended_storage(void) } #endif /* CONFIG_PM_SLEEP */ -#ifdef CONFIG_CMA - +#if (defined(CONFIG_MEMORY_ISOLATION) && defined(CONFIG_COMPACTION)) || defined(CONFIG_CMA) /* The below functions must be run on a range from a single zone. */ extern int alloc_contig_range(unsigned long start, unsigned long end, unsigned migratetype); extern void free_contig_range(unsigned long pfn, unsigned nr_pages); +#endif +#ifdef CONFIG_CMA /* CMA stuff */ extern void init_cma_reserved_pageblock(struct page *page); - #endif #endif /* __LINUX_GFP_H */ diff --git a/mm/hugetlb.c b/mm/hugetlb.c index d7a802427ea8..06ae13e869d0 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -1001,7 +1001,7 @@ static int hstate_next_node_to_free(struct hstate *h, nodemask_t *nodes_allowed) ((node = hstate_next_node_to_free(hs, mask)) || 1); \ nr_nodes--) -#if defined(CONFIG_CMA) && defined(CONFIG_X86_64) +#if defined(CONFIG_X86_64) && ((defined(CONFIG_MEMORY_ISOLATION) && defined(CONFIG_COMPACTION)) || defined(CONFIG_CMA)) static void destroy_compound_gigantic_page(struct page *page, unsigned int order) { diff --git a/mm/page_alloc.c b/mm/page_alloc.c index ea2c4d3e0c03..838ca8bb64f7 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -6620,7 +6620,7 @@ bool is_pageblock_removable_nolock(struct page *page) return !has_unmovable_pages(zone, page, 0, true); } -#ifdef CONFIG_CMA +#if (defined(CONFIG_MEMORY_ISOLATION) && defined(CONFIG_COMPACTION)) || defined(CONFIG_CMA) static unsigned long pfn_max_align_down(unsigned long pfn) { -- cgit v1.2.3 From 012a4163be4559d406ed2d7f2aa459538eb8b686 Mon Sep 17 00:00:00 2001 From: Nicolai Stange Date: Fri, 5 Feb 2016 15:36:44 -0800 Subject: um: asm/page.h: remove the pte_high member from struct pte_t Commit 16da306849d0 ("um: kill pfn_t") introduced a compile warning for defconfig (SUBARCH=i386): arch/um/kernel/skas/mmu.c:38:206: warning: right shift count >= width of type [-Wshift-count-overflow] Aforementioned patch changes the definition of the phys_to_pfn() macro from ((pfn_t) ((p) >> PAGE_SHIFT)) to ((p) >> PAGE_SHIFT) This effectively changes the phys_to_pfn() expansion's type from unsigned long long to unsigned long. Through the callchain init_stub_pte() => mk_pte(), the expansion of phys_to_pfn() is (indirectly) fed into the 'phys' argument of the pte_set_val(pte, phys, prot) macro, eventually leading to (pte).pte_high = (phys) >> 32; This results in the warning from above. Since UML only deals with 32 bit addresses, the upper 32 bits from 'phys' used to be always zero anyway. Also, all page protection flags defined by UML don't use any bits beyond bit 9. Since the contents of a PTE are defined within architecture scope only, the ->pte_high member can be safely removed. Remove the ->pte_high member from struct pte_t. Rename ->pte_low to ->pte. Adapt the pte helper macros in arch/um/include/asm/page.h. Noteworthy is the pte_copy() macro where a smp_wmb() gets dropped. This write barrier doesn't seem to be paired with any read barrier though and thus, was useless anyway. Fixes: 16da306849d0 ("um: kill pfn_t") Signed-off-by: Nicolai Stange Cc: Dan Williams Cc: Richard Weinberger Cc: Nicolai Stange Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/asm/page.h | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/um/include/asm/page.h b/arch/um/include/asm/page.h index e13d41c392ae..f878bec23576 100644 --- a/arch/um/include/asm/page.h +++ b/arch/um/include/asm/page.h @@ -34,21 +34,18 @@ struct page; #if defined(CONFIG_3_LEVEL_PGTABLES) && !defined(CONFIG_64BIT) -typedef struct { unsigned long pte_low, pte_high; } pte_t; +typedef struct { unsigned long pte; } pte_t; typedef struct { unsigned long pmd; } pmd_t; typedef struct { unsigned long pgd; } pgd_t; -#define pte_val(x) ((x).pte_low | ((unsigned long long) (x).pte_high << 32)) - -#define pte_get_bits(pte, bits) ((pte).pte_low & (bits)) -#define pte_set_bits(pte, bits) ((pte).pte_low |= (bits)) -#define pte_clear_bits(pte, bits) ((pte).pte_low &= ~(bits)) -#define pte_copy(to, from) ({ (to).pte_high = (from).pte_high; \ - smp_wmb(); \ - (to).pte_low = (from).pte_low; }) -#define pte_is_zero(pte) (!((pte).pte_low & ~_PAGE_NEWPAGE) && !(pte).pte_high) -#define pte_set_val(pte, phys, prot) \ - ({ (pte).pte_high = (phys) >> 32; \ - (pte).pte_low = (phys) | pgprot_val(prot); }) +#define pte_val(p) ((p).pte) + +#define pte_get_bits(p, bits) ((p).pte & (bits)) +#define pte_set_bits(p, bits) ((p).pte |= (bits)) +#define pte_clear_bits(p, bits) ((p).pte &= ~(bits)) +#define pte_copy(to, from) ({ (to).pte = (from).pte; }) +#define pte_is_zero(p) (!((p).pte & ~_PAGE_NEWPAGE)) +#define pte_set_val(p, phys, prot) \ + ({ (p).pte = (phys) | pgprot_val(prot); }) #define pmd_val(x) ((x).pmd) #define __pmd(x) ((pmd_t) { (x) } ) -- cgit v1.2.3 From f15838e9cac8f78f0cc506529bb9d3b9fa589c1f Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Fri, 5 Feb 2016 19:50:03 +0100 Subject: powerpc: Fix dedotify for binutils >= 2.26 Since binutils 2.26 BFD is doing suffix merging on STRTAB sections. But dedotify modifies the symbol names in place, which can also modify unrelated symbols with a name that matches a suffix of a dotted name. To remove the leading dot of a symbol name we can just increment the pointer into the STRTAB section instead. Backport to all stables to avoid breakage when people update their binutils - mpe. Cc: stable@vger.kernel.org Signed-off-by: Andreas Schwab Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/module_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c index ac64ffdb52c8..08b7a40de5f8 100644 --- a/arch/powerpc/kernel/module_64.c +++ b/arch/powerpc/kernel/module_64.c @@ -340,7 +340,7 @@ static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab) if (name[0] == '.') { if (strcmp(name+1, "TOC.") == 0) syms[i].st_shndx = SHN_ABS; - memmove(name, name+1, strlen(name)); + syms[i].st_name++; } } } -- cgit v1.2.3 From 59fd1214561921343305a0e9dc218bf3d40068f3 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 8 Feb 2016 08:47:48 +0100 Subject: x86/mm/numa: Fix 32-bit memblock range truncation bug on 32-bit NUMA kernels The following commit: a0acda917284 ("acpi, numa, mem_hotplug: mark all nodes the kernel resides un-hotpluggable") Introduced numa_clear_kernel_node_hotplug(), which function is executed during early bootup, and which marks all currently reserved memblock regions as hot-memory-unswappable as well. y14sg1 reported that when running 32-bit NUMA kernels, the grsecurity/PAX kernel patch flagged a size overflow in this function: PAX: size overflow detected in function x86_numa_init arch/x86/mm/numa.c:691 [...] ... the reason for the overflow is that memblock_clear_hotplug() takes physical addresses as arguments, while the start/end variables used by numa_clear_kernel_node_hotplug() are 'unsigned long', which is 32-bit on PAE kernels, but which has 64-bit physical addresses. So on 32-bit PAE kernels that have physical memory above the 4GB boundary, we truncate a 64-bit physical address range to 32 bits and pass it to memblock_clear_hotplug(), which at minimum prevents the original memory-hotplug bugfix from working, but might have other side effects as well. The fix is to use the proper type to handle physical addresses, phys_addr_t. Reported-by: y14sg1 Cc: Andrew Morton Cc: Brad Spengler Cc: Chen Tang Cc: "H. Peter Anvin" Cc: Lai Jiangshan Cc: Linus Torvalds Cc: PaX Team Cc: Taku Izumi Cc: Tang Chen Cc: Thomas Gleixner Cc: Wen Congyang Cc: Yasuaki Ishimatsu Cc: Zhang Yanfei Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar --- arch/x86/mm/numa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index c3b3f653ed0c..d04f8094bc23 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -469,7 +469,7 @@ static void __init numa_clear_kernel_node_hotplug(void) { int i, nid; nodemask_t numa_kernel_nodes = NODE_MASK_NONE; - unsigned long start, end; + phys_addr_t start, end; struct memblock_region *r; /* -- cgit v1.2.3 From 5070fb14a0154f075c8b418e5bc58a620ae85a45 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 8 Feb 2016 09:14:37 +0100 Subject: ARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz() When trying to set the ICST 307 clock to 25174000 Hz I ran into this arithmetic error: the icst_hz_to_vco() correctly figure out DIVIDE=2, RDW=100 and VDW=99 yielding a frequency of 25174000 Hz out of the VCO. (I replicated the icst_hz() function in a spreadsheet to verify this.) However, when I called icst_hz() on these VCO settings it would instead return 4122709 Hz. This causes an error in the common clock driver for ICST as the common clock framework will call .round_rate() on the clock which will utilize icst_hz_to_vco() followed by icst_hz() suggesting the erroneous frequency, and then the clock gets set to this. The error did not manifest in the old clock framework since this high frequency was only used by the CLCD, which calls clk_set_rate() without first calling clk_round_rate() and since the old clock framework would not call clk_round_rate() before setting the frequency, the correct values propagated into the VCO. After some experimenting I figured out that it was due to a simple arithmetic overflow: the divisor for 24Mhz reference frequency as reference becomes 24000000*2*(99+8)=0x132212400 and the "1" in bit 32 overflows and is lost. But introducing an explicit 64-by-32 bit do_div() and casting the divisor into (u64) we get the right frequency back, and the right frequency gets set. Tested on the ARM Versatile. Cc: stable@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: Pawel Moll Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/common/icst.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/common/icst.c b/arch/arm/common/icst.c index 2dc6da70ae59..d3c0e69df259 100644 --- a/arch/arm/common/icst.c +++ b/arch/arm/common/icst.c @@ -16,7 +16,7 @@ */ #include #include - +#include #include /* @@ -29,7 +29,11 @@ EXPORT_SYMBOL(icst525_s2div); unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco) { - return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]); + u64 dividend = p->ref * 2 * (u64)(vco.v + 8); + u32 divisor = (vco.r + 2) * p->s2div[vco.s]; + + do_div(dividend, divisor); + return (unsigned long)dividend; } EXPORT_SYMBOL(icst_hz); -- cgit v1.2.3 From 3af5a67c86a30f8cd8bfd6202709be21cedd2756 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Mon, 8 Feb 2016 09:46:31 -0800 Subject: MIPS: Fix early CM probing Commit c014d164f21d ("MIPS: Add platform callback before initializing the L2 cache") added a platform_early_l2_init function in order to allow platforms to probe for the CM before L2 initialisation is performed, so that CM GCRs are available to mips_sc_probe. That commit actually fails to do anything useful, since it checks mips_cm_revision to determine whether it should call mips_cm_probe but the result of mips_cm_revision will always be 0 until mips_cm_probe has been called. Thus the "early" mips_cm_probe call never occurs. Fix this & drop the useless weak platform_early_l2_init function by simply calling mips_cm_probe from setup_arch. For platforms that don't select CONFIG_MIPS_CM this will be a no-op, and for those that do it removes the requirement for them to call mips_cm_probe manually (although doing so isn't harmful for now). Signed-off-by: Paul Burton Reviewed-by: Alexander Sverdlin Cc: Andrzej Hajda Cc: Aaro Koskinen Cc: Masahiro Yamada Cc: Rob Herring Cc: Peter Hurley Cc: Leonid Yegoshin Cc: Jaedon Shin Cc: James Hogan Cc: Jonas Gorski Cc: Markos Chandras Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12475/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/setup.c | 1 + arch/mips/mm/sc-mips.c | 10 ---------- arch/mips/mti-malta/malta-init.c | 8 -------- 3 files changed, 1 insertion(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 569a7d5242dd..5fdaf8bdcd2e 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -782,6 +782,7 @@ static inline void prefill_possible_map(void) {} void __init setup_arch(char **cmdline_p) { cpu_probe(); + mips_cm_probe(); prom_init(); setup_early_fdc_console(); diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c index 3bd0597d9c3d..249647578e58 100644 --- a/arch/mips/mm/sc-mips.c +++ b/arch/mips/mm/sc-mips.c @@ -181,10 +181,6 @@ static int __init mips_sc_probe_cm3(void) return 1; } -void __weak platform_early_l2_init(void) -{ -} - static inline int __init mips_sc_probe(void) { struct cpuinfo_mips *c = ¤t_cpu_data; @@ -194,12 +190,6 @@ static inline int __init mips_sc_probe(void) /* Mark as not present until probe completed */ c->scache.flags |= MIPS_CACHE_NOT_PRESENT; - /* - * Do we need some platform specific probing before - * we configure L2? - */ - platform_early_l2_init(); - if (mips_cm_revision() >= CM_REV_CM3) return mips_sc_probe_cm3(); diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c index 571148c5fd0b..dc2c5214809d 100644 --- a/arch/mips/mti-malta/malta-init.c +++ b/arch/mips/mti-malta/malta-init.c @@ -293,7 +293,6 @@ mips_pci_controller: console_config(); #endif /* Early detection of CMP support */ - mips_cm_probe(); mips_cpc_probe(); if (!register_cps_smp_ops()) @@ -304,10 +303,3 @@ mips_pci_controller: return; register_up_smp_ops(); } - -void platform_early_l2_init(void) -{ - /* L2 configuration lives in the CM3 */ - if (mips_cm_revision() >= CM_REV_CM3) - mips_cm_probe(); -} -- cgit v1.2.3 From bcaf669b4bdbad09888df086d266a34e293ace85 Mon Sep 17 00:00:00 2001 From: Yang Shi Date: Mon, 8 Feb 2016 09:13:09 -0800 Subject: arm64: disable kasan when accessing frame->fp in unwind_frame When boot arm64 kernel with KASAN enabled, the below error is reported by kasan: BUG: KASAN: out-of-bounds in unwind_frame+0xec/0x260 at addr ffffffc064d57ba0 Read of size 8 by task pidof/499 page:ffffffbdc39355c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x0() page dumped because: kasan: bad access detected CPU: 2 PID: 499 Comm: pidof Not tainted 4.5.0-rc1 #119 Hardware name: Freescale Layerscape 2085a RDB Board (DT) Call trace: [] dump_backtrace+0x0/0x290 [] show_stack+0x24/0x30 [] dump_stack+0x8c/0xd8 [] kasan_report_error+0x558/0x588 [] kasan_report+0x60/0x70 [] __asan_load8+0x60/0x78 [] unwind_frame+0xec/0x260 [] get_wchan+0x110/0x160 [] do_task_stat+0xb44/0xb68 [] proc_tgid_stat+0x40/0x50 [] proc_single_show+0x88/0xd8 [] seq_read+0x370/0x770 [] __vfs_read+0xc8/0x1d8 [] vfs_read+0x94/0x168 [] SyS_read+0xb8/0x128 [] el0_svc_naked+0x24/0x28 Memory state around the buggy address: ffffffc064d57a80: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 f4 f4 ffffffc064d57b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffc064d57b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffffffc064d57c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffc064d57c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Since the shadow byte pointed by the report is 0, so it may mean it is just hit oob in non-current task. So, disable the instrumentation to silence these warnings. Acked-by: Andrey Ryabinin Signed-off-by: Yang Shi Signed-off-by: Will Deacon --- arch/arm64/kernel/stacktrace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c index 4fad9787ab46..12a18cbc4295 100644 --- a/arch/arm64/kernel/stacktrace.c +++ b/arch/arm64/kernel/stacktrace.c @@ -64,8 +64,8 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame) return -EINVAL; frame->sp = fp + 0x10; - frame->fp = *(unsigned long *)(fp); - frame->pc = *(unsigned long *)(fp + 8); + frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp)); + frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 8)); #ifdef CONFIG_FUNCTION_GRAPH_TRACER if (tsk && tsk->ret_stack && -- cgit v1.2.3 From dec2b2849cfccf09822d6ce3f9bc84b8c8611152 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Sun, 7 Feb 2016 12:54:35 +0530 Subject: ARCv2: intc: Allow interruption by lowest priority interrupt ARC HS Cores support configurable multiple interrupt priorities of upto 16 levels. There is processor "interrupt preemption threshhold" in STATUS32.E[4:1] And several places need to set this up: 1. seed value as kernel is booting 2. seed value for user space programs 3. Arg to SLEEP instruction in idle task (what interrupt prio can wake) 4. Per-IRQ line prioirty (i.e. what is the priority of interrupt raised by a peripheral or timer or perf counter... Currently above sites use the highest priority 0. This can be potential problem when multiple priorities are supported. e.g. user space could only be interrupted by P0 interrupt, not others... So turn this over and instead make default interruption level to be the lowest priority possible 15. This should be fine even if there are fewer priority levels configured (say two: P0 HIGH, P1 LOW) This feature also effectively disables FIRQ feature if present in hardware config. With old code, a P0 interrupt would be FIRQ, needing special handling (ISR or Register Banks) which is NOT supported yet. Now it not be P0 (P15 or whatever is lowest prio) so FIRQ is not triggered. Signed-off-by: Vineet Gupta --- arch/arc/include/asm/irqflags-arcv2.h | 7 ++++-- arch/arc/kernel/intc-arcv2.c | 41 ++++++++++++++++++++--------------- 2 files changed, 29 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/arc/include/asm/irqflags-arcv2.h b/arch/arc/include/asm/irqflags-arcv2.h index 258b0e5ad332..1fc18ee06cf2 100644 --- a/arch/arc/include/asm/irqflags-arcv2.h +++ b/arch/arc/include/asm/irqflags-arcv2.h @@ -30,8 +30,11 @@ /* Was Intr taken in User Mode */ #define AUX_IRQ_ACT_BIT_U 31 -/* 0 is highest level, but taken by FIRQs, if present in design */ -#define ARCV2_IRQ_DEF_PRIO 0 +/* + * User space should be interruptable even by lowest prio interrupt + * Safe even if actual interrupt priorities is fewer or even one + */ +#define ARCV2_IRQ_DEF_PRIO 15 /* seed value for status register */ #define ISA_INIT_STATUS_BITS (STATUS_IE_MASK | STATUS_AD_MASK | \ diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c index 0394f9f61b46..942526322ae7 100644 --- a/arch/arc/kernel/intc-arcv2.c +++ b/arch/arc/kernel/intc-arcv2.c @@ -14,6 +14,8 @@ #include #include +static int irq_prio; + /* * Early Hardware specific Interrupt setup * -Called very early (start_kernel -> setup_arch -> setup_processor) @@ -24,6 +26,14 @@ void arc_init_IRQ(void) { unsigned int tmp; + struct irq_build { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad:3, firq:1, prio:4, exts:8, irqs:8, ver:8; +#else + unsigned int ver:8, irqs:8, exts:8, prio:4, firq:1, pad:3; +#endif + } irq_bcr; + struct aux_irq_ctrl { #ifdef CONFIG_CPU_BIG_ENDIAN unsigned int res3:18, save_idx_regs:1, res2:1, @@ -46,28 +56,25 @@ void arc_init_IRQ(void) WRITE_AUX(AUX_IRQ_CTRL, ictrl); - /* setup status32, don't enable intr yet as kernel doesn't want */ - tmp = read_aux_reg(0xa); - tmp |= ISA_INIT_STATUS_BITS; - tmp &= ~STATUS_IE_MASK; - asm volatile("flag %0 \n"::"r"(tmp)); - /* * ARCv2 core intc provides multiple interrupt priorities (upto 16). * Typical builds though have only two levels (0-high, 1-low) * Linux by default uses lower prio 1 for most irqs, reserving 0 for * NMI style interrupts in future (say perf) - * - * Read the intc BCR to confirm that Linux default priority is avail - * in h/w - * - * Note: - * IRQ_BCR[27..24] contains N-1 (for N priority levels) and prio level - * is 0 based. */ - tmp = (read_aux_reg(ARC_REG_IRQ_BCR) >> 24 ) & 0xF; - if (ARCV2_IRQ_DEF_PRIO > tmp) - panic("Linux default irq prio incorrect\n"); + + READ_BCR(ARC_REG_IRQ_BCR, irq_bcr); + + irq_prio = irq_bcr.prio; /* Encoded as N-1 for N levels */ + pr_info("archs-intc\t: %d priority levels (default %d)%s\n", + irq_prio + 1, irq_prio, + irq_bcr.firq ? " FIRQ (not used)":""); + + /* setup status32, don't enable intr yet as kernel doesn't want */ + tmp = read_aux_reg(0xa); + tmp |= STATUS_AD_MASK | (irq_prio << 1); + tmp &= ~STATUS_IE_MASK; + asm volatile("flag %0 \n"::"r"(tmp)); } static void arcv2_irq_mask(struct irq_data *data) @@ -86,7 +93,7 @@ void arcv2_irq_enable(struct irq_data *data) { /* set default priority */ write_aux_reg(AUX_IRQ_SELECT, data->irq); - write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO); + write_aux_reg(AUX_IRQ_PRIORITY, irq_prio); /* * hw auto enables (linux unmask) all by default -- cgit v1.2.3 From 665ca9187c4087736fa57b0e00bcf33ea601fb6f Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Sun, 31 Jan 2016 14:23:30 +0100 Subject: s390/stacktrace: fix save_stack_trace_tsk() for current task The function save_stack_trace_tsk() did not consider that it can be used for tsk == current, for which the current stack pointer obviously cannot be found in the thread structure. Fix this and get the stack pointer with an inline assembly. This fixes e.g. the output of "cat /proc/self/stack". Before: [<0000000000000000>] (null) [] 0xffffffffffffffff After: [<000000000011b3ee>] save_stack_trace_tsk+0x56/0x98 [<0000000000366cde>] proc_pid_stack+0xae/0x108 [<00000000003636f0>] proc_single_show+0x70/0xc0 [<0000000000311fbc>] seq_read+0xcc/0x448 [<00000000002e7716>] __vfs_read+0x36/0x100 [<00000000002e872e>] vfs_read+0x76/0x130 [<00000000002e975e>] SyS_read+0x66/0xd8 [<000000000089490e>] system_call+0xd6/0x264 [] 0xffffffffffffffff Signed-off-by: Heiko Carstens Tested-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/stacktrace.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/s390/kernel/stacktrace.c b/arch/s390/kernel/stacktrace.c index 5acba3cb7220..dd484c75be56 100644 --- a/arch/s390/kernel/stacktrace.c +++ b/arch/s390/kernel/stacktrace.c @@ -86,6 +86,10 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) unsigned long sp, low, high; sp = tsk->thread.ksp; + if (tsk == current) { + /* Get current stack pointer. */ + asm volatile("la %0,0(15)" : "=a" (sp)); + } low = (unsigned long) task_stack_page(tsk); high = (unsigned long) task_pt_regs(tsk); save_context_stack(trace, sp, low, high, 0); -- cgit v1.2.3 From 9900c48c46d8bcf497972024c5fe366e6d9771f3 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 1 Feb 2016 10:13:05 +0100 Subject: s390/stacktrace: fix address ranges for asynchronous and panic stack git commit dc7ee00d4771 ("s390: lowcore stack pointer offsets") introduced a regression in regard to save_stack_trace(). The stack pointer for the asynchronous and the panic stack in the lowcore now have an additional offset applied to them. This offset needs to be taken into account in the calculation for the low and high address for the stacks. This bug was already partially fixed with 9cc5c206d9b4 ("s390/dumpstack: fix address ranges for asynchronous and panic stack"). This patch fixes it also for the stacktrace code. Fixes: dc7ee00d4771 ("s390: lowcore stack pointer offsets") Signed-off-by: Heiko Carstens Tested-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/stacktrace.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/stacktrace.c b/arch/s390/kernel/stacktrace.c index dd484c75be56..225bed00aa92 100644 --- a/arch/s390/kernel/stacktrace.c +++ b/arch/s390/kernel/stacktrace.c @@ -62,17 +62,18 @@ static unsigned long save_context_stack(struct stack_trace *trace, void save_stack_trace(struct stack_trace *trace) { register unsigned long sp asm ("15"); - unsigned long orig_sp, new_sp; + unsigned long orig_sp, new_sp, frame_size; + frame_size = STACK_FRAME_OVERHEAD + sizeof(struct pt_regs); orig_sp = sp; new_sp = save_context_stack(trace, orig_sp, - S390_lowcore.panic_stack - PAGE_SIZE, - S390_lowcore.panic_stack, 1); + S390_lowcore.panic_stack + frame_size - PAGE_SIZE, + S390_lowcore.panic_stack + frame_size, 1); if (new_sp != orig_sp) return; new_sp = save_context_stack(trace, new_sp, - S390_lowcore.async_stack - ASYNC_SIZE, - S390_lowcore.async_stack, 1); + S390_lowcore.async_stack + frame_size - ASYNC_SIZE, + S390_lowcore.async_stack + frame_size, 1); if (new_sp != orig_sp) return; save_context_stack(trace, new_sp, -- cgit v1.2.3 From f6331aaccbd980a49bff1559d66abcbd46af5b0a Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 1 Feb 2016 14:06:57 +0100 Subject: s390/stacktrace: add missing end marker save_stack_trace() did not write the ULONG_MAX end marker if there is enough space left. So simply follow x86 and arm64. Signed-off-by: Heiko Carstens Tested-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/stacktrace.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/s390/kernel/stacktrace.c b/arch/s390/kernel/stacktrace.c index 225bed00aa92..75e6ea930692 100644 --- a/arch/s390/kernel/stacktrace.c +++ b/arch/s390/kernel/stacktrace.c @@ -79,6 +79,8 @@ void save_stack_trace(struct stack_trace *trace) save_context_stack(trace, new_sp, S390_lowcore.thread_info, S390_lowcore.thread_info + THREAD_SIZE, 1); + if (trace->nr_entries < trace->max_entries) + trace->entries[trace->nr_entries++] = ULONG_MAX; } EXPORT_SYMBOL_GPL(save_stack_trace); -- cgit v1.2.3 From 66adce8f1f9f3bcd743a0e72c10aa850df8c5fa7 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 1 Feb 2016 14:14:04 +0100 Subject: s390/stacktrace: save full stack traces save_stack_trace() only saves the stack trace of the current context (interrupt or process context). This is different to what other architectures like x86 do, which save the full stack trace across different contexts. Also extract a __save_stack_trace() helper function which will be used by a follow on patch. Signed-off-by: Heiko Carstens Tested-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/stacktrace.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/stacktrace.c b/arch/s390/kernel/stacktrace.c index 75e6ea930692..e0fec2d8ac40 100644 --- a/arch/s390/kernel/stacktrace.c +++ b/arch/s390/kernel/stacktrace.c @@ -59,26 +59,29 @@ static unsigned long save_context_stack(struct stack_trace *trace, } } -void save_stack_trace(struct stack_trace *trace) +static void __save_stack_trace(struct stack_trace *trace, unsigned long sp) { - register unsigned long sp asm ("15"); - unsigned long orig_sp, new_sp, frame_size; + unsigned long new_sp, frame_size; frame_size = STACK_FRAME_OVERHEAD + sizeof(struct pt_regs); - orig_sp = sp; - new_sp = save_context_stack(trace, orig_sp, + new_sp = save_context_stack(trace, sp, S390_lowcore.panic_stack + frame_size - PAGE_SIZE, S390_lowcore.panic_stack + frame_size, 1); - if (new_sp != orig_sp) - return; new_sp = save_context_stack(trace, new_sp, S390_lowcore.async_stack + frame_size - ASYNC_SIZE, S390_lowcore.async_stack + frame_size, 1); - if (new_sp != orig_sp) - return; save_context_stack(trace, new_sp, S390_lowcore.thread_info, S390_lowcore.thread_info + THREAD_SIZE, 1); +} + +void save_stack_trace(struct stack_trace *trace) +{ + register unsigned long r15 asm ("15"); + unsigned long sp; + + sp = r15; + __save_stack_trace(trace, sp); if (trace->nr_entries < trace->max_entries) trace->entries[trace->nr_entries++] = ULONG_MAX; } -- cgit v1.2.3 From e0115875c04548255212ebd7dbd90bdbe1257f48 Mon Sep 17 00:00:00 2001 From: Pratyush Anand Date: Fri, 29 Jan 2016 10:50:28 +0530 Subject: s390/stacktrace: add save_stack_trace_regs() Implement save_stack_trace_regs, so that a stack trace of a kprobe event can be obtained. Without this we see following warning: "save_stack_trace_regs() not implemented yet." when we execute: echo stacktrace > /sys/kernel/debug/tracing/trace_options echo "p kfree" >> /sys/kernel/debug/tracing/kprobe_events echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable Reported-by: Chunyu Hu Signed-off-by: Pratyush Anand [heiko.carstens@de.ibm.com]: changed patch to use __save_stack_trace() Signed-off-by: Heiko Carstens Tested-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/stacktrace.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/s390/kernel/stacktrace.c b/arch/s390/kernel/stacktrace.c index e0fec2d8ac40..8f64ebd63767 100644 --- a/arch/s390/kernel/stacktrace.c +++ b/arch/s390/kernel/stacktrace.c @@ -103,3 +103,14 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) trace->entries[trace->nr_entries++] = ULONG_MAX; } EXPORT_SYMBOL_GPL(save_stack_trace_tsk); + +void save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace) +{ + unsigned long sp; + + sp = kernel_stack_pointer(regs); + __save_stack_trace(trace, sp); + if (trace->nr_entries < trace->max_entries) + trace->entries[trace->nr_entries++] = ULONG_MAX; +} +EXPORT_SYMBOL_GPL(save_stack_trace_regs); -- cgit v1.2.3 From 1f8cbb9c8365061d8b866e9b4f4403e029d57989 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 9 Feb 2016 12:00:16 +0100 Subject: s390/perf_event: fix address range for asynchronous stack git commit dc7ee00d4771 ("s390: lowcore stack pointer offsets") introduced a regression in regard to perf_callchain_kernel(). The stack pointer for the asynchronous stack in the lowcore now has an additional offset applied. This offset needs to be taken into account in the calculation for the low and high address for the stack. This bug was already partially fixed with 9cc5c206d9b4 ("s390/dumpstack: fix address ranges for asynchronous and panic stack"). This patch fixes it also for the perf_event code. Fixes: dc7ee00d4771 ("s390: lowcore stack pointer offsets") Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/perf_event.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/perf_event.c b/arch/s390/kernel/perf_event.c index cfcba2dd9bb5..0943b11a2f6e 100644 --- a/arch/s390/kernel/perf_event.c +++ b/arch/s390/kernel/perf_event.c @@ -260,12 +260,13 @@ static unsigned long __store_trace(struct perf_callchain_entry *entry, void perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs) { - unsigned long head; + unsigned long head, frame_size; struct stack_frame *head_sf; if (user_mode(regs)) return; + frame_size = STACK_FRAME_OVERHEAD + sizeof(struct pt_regs); head = regs->gprs[15]; head_sf = (struct stack_frame *) head; @@ -273,8 +274,9 @@ void perf_callchain_kernel(struct perf_callchain_entry *entry, return; head = head_sf->back_chain; - head = __store_trace(entry, head, S390_lowcore.async_stack - ASYNC_SIZE, - S390_lowcore.async_stack); + head = __store_trace(entry, head, + S390_lowcore.async_stack + frame_size - ASYNC_SIZE, + S390_lowcore.async_stack + frame_size); __store_trace(entry, head, S390_lowcore.thread_info, S390_lowcore.thread_info + THREAD_SIZE); -- cgit v1.2.3 From 232f5dd78586a684a7364a486b934e19384189dc Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 9 Feb 2016 12:03:31 +0100 Subject: s390/oprofile: fix address range for asynchronous stack git commit dc7ee00d4771 ("s390: lowcore stack pointer offsets") introduced a regression in regard to s390_backtrace(). The stack pointer for the asynchronous stack in the lowcore now has an additional offset applied. This offset needs to be taken into account in the calculation for the low and high address for the stack. This bug was already partially fixed with commit 9cc5c206d9b4 ("s390/dumpstack: fix address ranges for asynchronous and panic stack"). This patch fixes it also for the oprofile code. Fixes: dc7ee00d4771 ("s390: lowcore stack pointer offsets") Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/oprofile/backtrace.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/s390/oprofile/backtrace.c b/arch/s390/oprofile/backtrace.c index fe0bfe370c45..1884e1759529 100644 --- a/arch/s390/oprofile/backtrace.c +++ b/arch/s390/oprofile/backtrace.c @@ -54,12 +54,13 @@ __show_trace(unsigned int *depth, unsigned long sp, void s390_backtrace(struct pt_regs * const regs, unsigned int depth) { - unsigned long head; + unsigned long head, frame_size; struct stack_frame* head_sf; if (user_mode(regs)) return; + frame_size = STACK_FRAME_OVERHEAD + sizeof(struct pt_regs); head = regs->gprs[15]; head_sf = (struct stack_frame*)head; @@ -68,8 +69,9 @@ void s390_backtrace(struct pt_regs * const regs, unsigned int depth) head = head_sf->back_chain; - head = __show_trace(&depth, head, S390_lowcore.async_stack - ASYNC_SIZE, - S390_lowcore.async_stack); + head = __show_trace(&depth, head, + S390_lowcore.async_stack + frame_size - ASYNC_SIZE, + S390_lowcore.async_stack + frame_size); __show_trace(&depth, head, S390_lowcore.thread_info, S390_lowcore.thread_info + THREAD_SIZE); -- cgit v1.2.3 From aaa0bf22cb84c7b29c814f3fcf3951c747b904d6 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 6 Feb 2016 22:24:19 +0800 Subject: MIPS: pci-mt7620: Fix return value check in mt7620_pci_probe() In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Acked-by: John Crispin Cc: Matthias Brugger Cc: linux-mips@linux-mips.org Cc: linux-mediatek@lists.infradead.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12451/ Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-mt7620.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/pci/pci-mt7620.c b/arch/mips/pci/pci-mt7620.c index a009ee458934..1ae932c2d78b 100644 --- a/arch/mips/pci/pci-mt7620.c +++ b/arch/mips/pci/pci-mt7620.c @@ -297,12 +297,12 @@ static int mt7620_pci_probe(struct platform_device *pdev) return PTR_ERR(rstpcie0); bridge_base = devm_ioremap_resource(&pdev->dev, bridge_res); - if (!bridge_base) - return -ENOMEM; + if (IS_ERR(bridge_base)) + return PTR_ERR(bridge_base); pcie_base = devm_ioremap_resource(&pdev->dev, pcie_res); - if (!pcie_base) - return -ENOMEM; + if (IS_ERR(pcie_base)) + return PTR_ERR(pcie_base); iomem_resource.start = 0; iomem_resource.end = ~0; -- cgit v1.2.3 From b96d6a80c95815fd01e99a239cd515fc05e5f867 Mon Sep 17 00:00:00 2001 From: Zubair Lutfullah Kakakhel Date: Wed, 10 Feb 2016 13:56:25 +0000 Subject: MIPS: Octeon: Update OCTEON_FEATURE_PCIE for Octeon III Currently the driver tries to probe the pci driver and oops. Add CN7XXX to case so that driver probes the pcie driver. Signed-off-by: Zubair Lutfullah Kakakhel Cc: david.daney@cavium.com Cc: matt.redfearn@imgtec.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12530/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/octeon/octeon-feature.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/include/asm/octeon/octeon-feature.h b/arch/mips/include/asm/octeon/octeon-feature.h index 8ebd3f579b84..3ed10a8d7865 100644 --- a/arch/mips/include/asm/octeon/octeon-feature.h +++ b/arch/mips/include/asm/octeon/octeon-feature.h @@ -128,7 +128,8 @@ static inline int octeon_has_feature(enum octeon_feature feature) case OCTEON_FEATURE_PCIE: return OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX) - || OCTEON_IS_MODEL(OCTEON_CN6XXX); + || OCTEON_IS_MODEL(OCTEON_CN6XXX) + || OCTEON_IS_MODEL(OCTEON_CN7XXX); case OCTEON_FEATURE_SRIO: return OCTEON_IS_MODEL(OCTEON_CN63XX) -- cgit v1.2.3 From e04a28d45ff343b47a4ffc4dee3a3e279e76ddfa Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 10 Feb 2016 16:05:28 +0000 Subject: arm64: debug: re-enable irqs before sending breakpoint SIGTRAP force_sig_info can sleep under an -rt kernel, so attempting to send a breakpoint SIGTRAP with interrupts disabled yields the following BUG: BUG: sleeping function called from invalid context at /kernel-source/kernel/locking/rtmutex.c:917 in_atomic(): 0, irqs_disabled(): 128, pid: 551, name: test.sh CPU: 5 PID: 551 Comm: test.sh Not tainted 4.1.13-rt13 #7 Hardware name: Freescale Layerscape 2085a RDB Board (DT) Call trace: dump_backtrace+0x0/0x128 show_stack+0x24/0x30 dump_stack+0x80/0xa0 ___might_sleep+0x128/0x1a0 rt_spin_lock+0x2c/0x40 force_sig_info+0xcc/0x210 brk_handler.part.2+0x6c/0x80 brk_handler+0xd8/0xe8 do_debug_exception+0x58/0xb8 This patch fixes the problem by ensuring that interrupts are enabled prior to sending the SIGTRAP if they were already enabled in the user context. Reported-by: Yang Shi Signed-off-by: Will Deacon --- arch/arm64/kernel/debug-monitors.c | 48 +++++++++++++++++--------------------- 1 file changed, 22 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index 8aee3aeec3e6..c536c9e307b9 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -226,11 +226,28 @@ static int call_step_hook(struct pt_regs *regs, unsigned int esr) return retval; } +static void send_user_sigtrap(int si_code) +{ + struct pt_regs *regs = current_pt_regs(); + siginfo_t info = { + .si_signo = SIGTRAP, + .si_errno = 0, + .si_code = si_code, + .si_addr = (void __user *)instruction_pointer(regs), + }; + + if (WARN_ON(!user_mode(regs))) + return; + + if (interrupts_enabled(regs)) + local_irq_enable(); + + force_sig_info(SIGTRAP, &info, current); +} + static int single_step_handler(unsigned long addr, unsigned int esr, struct pt_regs *regs) { - siginfo_t info; - /* * If we are stepping a pending breakpoint, call the hw_breakpoint * handler first. @@ -239,11 +256,7 @@ static int single_step_handler(unsigned long addr, unsigned int esr, return 0; if (user_mode(regs)) { - info.si_signo = SIGTRAP; - info.si_errno = 0; - info.si_code = TRAP_HWBKPT; - info.si_addr = (void __user *)instruction_pointer(regs); - force_sig_info(SIGTRAP, &info, current); + send_user_sigtrap(TRAP_HWBKPT); /* * ptrace will disable single step unless explicitly @@ -307,17 +320,8 @@ static int call_break_hook(struct pt_regs *regs, unsigned int esr) static int brk_handler(unsigned long addr, unsigned int esr, struct pt_regs *regs) { - siginfo_t info; - if (user_mode(regs)) { - info = (siginfo_t) { - .si_signo = SIGTRAP, - .si_errno = 0, - .si_code = TRAP_BRKPT, - .si_addr = (void __user *)instruction_pointer(regs), - }; - - force_sig_info(SIGTRAP, &info, current); + send_user_sigtrap(TRAP_BRKPT); } else if (call_break_hook(regs, esr) != DBG_HOOK_HANDLED) { pr_warning("Unexpected kernel BRK exception at EL1\n"); return -EFAULT; @@ -328,7 +332,6 @@ static int brk_handler(unsigned long addr, unsigned int esr, int aarch32_break_handler(struct pt_regs *regs) { - siginfo_t info; u32 arm_instr; u16 thumb_instr; bool bp = false; @@ -359,14 +362,7 @@ int aarch32_break_handler(struct pt_regs *regs) if (!bp) return -EFAULT; - info = (siginfo_t) { - .si_signo = SIGTRAP, - .si_errno = 0, - .si_code = TRAP_BRKPT, - .si_addr = pc, - }; - - force_sig_info(SIGTRAP, &info, current); + send_user_sigtrap(TRAP_BRKPT); return 0; } -- cgit v1.2.3 From 1a1ebd5fb1e203ee8cc73508cc7a38ac4b804596 Mon Sep 17 00:00:00 2001 From: Tirumalesh Chalamarla Date: Thu, 4 Feb 2016 10:45:25 -0800 Subject: irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is visible on redestributor The ARM GICv3 specification mentions the need for dsb after a read from the ICC_IAR1_EL1 register: 4.1.1 Physical CPU Interface: The effects of reading ICC_IAR0_EL1 and ICC_IAR1_EL1 on the state of a returned INTID are not guaranteed to be visible until after the execution of a DSB. Not having this could result in missed interrupts, so let's add the required barrier. [Marc: fixed commit message] Acked-by: Marc Zyngier Signed-off-by: Tirumalesh Chalamarla Signed-off-by: Marc Zyngier --- arch/arm64/include/asm/arch_gicv3.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h index 2731d3b25ed2..8ec88e5b290f 100644 --- a/arch/arm64/include/asm/arch_gicv3.h +++ b/arch/arm64/include/asm/arch_gicv3.h @@ -103,6 +103,7 @@ static inline u64 gic_read_iar_common(void) u64 irqstat; asm volatile("mrs_s %0, " __stringify(ICC_IAR1_EL1) : "=r" (irqstat)); + dsb(sy); return irqstat; } -- cgit v1.2.3 From f4d3d504198d464e406171cfa554a59bd4773d79 Mon Sep 17 00:00:00 2001 From: Daniel Wagner Date: Wed, 10 Feb 2016 10:21:21 +0100 Subject: mips: Differentiate between 32 and 64 bit ELF header Depending on the configuration either the 32 or 64 bit version of elf_check_arch() is defined. parse_crash_elf{32|64}_headers() does some basic verification of the ELF header via vmcore_elf{32|64}_check_arch() which happen to map to elf_check_arch(). Since the implementation 32 and 64 bit version of elf_check_arch() differ, we use the wrong type: In file included from include/linux/elf.h:4:0, from fs/proc/vmcore.c:13: fs/proc/vmcore.c: In function 'parse_crash_elf64_headers': >> arch/mips/include/asm/elf.h:228:23: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] struct elfhdr *__h = (hdr); \ ^ include/linux/crash_dump.h:41:37: note: in expansion of macro 'elf_check_arch' #define vmcore_elf64_check_arch(x) (elf_check_arch(x) || vmcore_elf_check_arch_cross(x)) ^ fs/proc/vmcore.c:1015:4: note: in expansion of macro 'vmcore_elf64_check_arch' !vmcore_elf64_check_arch(&ehdr) || ^ Therefore, we rather define vmcore_elf{32|64}_check_arch() as a basic machine check and use it also in binfm_elf?32.c as well. Signed-off-by: Daniel Wagner Suggested-by: Maciej W. Rozycki Reviewed-by: Maciej W. Rozycki Reported-by: Fengguang Wu Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12529/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/elf.h | 9 +++++++-- arch/mips/kernel/binfmt_elfn32.c | 2 +- arch/mips/kernel/binfmt_elfo32.c | 2 +- 3 files changed, 9 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h index cefb7a596878..e090fc388e02 100644 --- a/arch/mips/include/asm/elf.h +++ b/arch/mips/include/asm/elf.h @@ -227,7 +227,7 @@ struct mips_elf_abiflags_v0 { int __res = 1; \ struct elfhdr *__h = (hdr); \ \ - if (__h->e_machine != EM_MIPS) \ + if (!mips_elf_check_machine(__h)) \ __res = 0; \ if (__h->e_ident[EI_CLASS] != ELFCLASS32) \ __res = 0; \ @@ -258,7 +258,7 @@ struct mips_elf_abiflags_v0 { int __res = 1; \ struct elfhdr *__h = (hdr); \ \ - if (__h->e_machine != EM_MIPS) \ + if (!mips_elf_check_machine(__h)) \ __res = 0; \ if (__h->e_ident[EI_CLASS] != ELFCLASS64) \ __res = 0; \ @@ -285,6 +285,11 @@ struct mips_elf_abiflags_v0 { #endif /* !defined(ELF_ARCH) */ +#define mips_elf_check_machine(x) ((x)->e_machine == EM_MIPS) + +#define vmcore_elf32_check_arch mips_elf_check_machine +#define vmcore_elf64_check_arch mips_elf_check_machine + struct mips_abi; extern struct mips_abi mips_abi; diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c index 1188e00bb120..1b992c6e3d8e 100644 --- a/arch/mips/kernel/binfmt_elfn32.c +++ b/arch/mips/kernel/binfmt_elfn32.c @@ -35,7 +35,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; int __res = 1; \ struct elfhdr *__h = (hdr); \ \ - if (__h->e_machine != EM_MIPS) \ + if (!mips_elf_check_machine(__h)) \ __res = 0; \ if (__h->e_ident[EI_CLASS] != ELFCLASS32) \ __res = 0; \ diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c index 928767858b86..abd3affe5fb3 100644 --- a/arch/mips/kernel/binfmt_elfo32.c +++ b/arch/mips/kernel/binfmt_elfo32.c @@ -47,7 +47,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; int __res = 1; \ struct elfhdr *__h = (hdr); \ \ - if (__h->e_machine != EM_MIPS) \ + if (!mips_elf_check_machine(__h)) \ __res = 0; \ if (__h->e_ident[EI_CLASS] != ELFCLASS32) \ __res = 0; \ -- cgit v1.2.3 From 0986d97741150b307775d56f587a73ea873a4f4d Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Tue, 9 Feb 2016 16:23:39 +0100 Subject: s390: fix DAT off memory access, e.g. on kdump commit 204ee2c56431 ("s390/irqflags: optimize irq restore") optimized irqrestore to really only care about interrupts and adapted the remaining low level users. One spot (memcpy_real) was not touched, though - fix it. Otherwise a kdump kernel will fail while reading the old kernel. As we re-enable irqs with a non-standard function we have to tell lockdep about that. Fixes: 204ee2c56431 ("s390/irqflags: optimize irq restore") Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- arch/s390/mm/maccess.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c index fec59c067d0d..350b0acd7f52 100644 --- a/arch/s390/mm/maccess.c +++ b/arch/s390/mm/maccess.c @@ -101,7 +101,9 @@ int memcpy_real(void *dest, void *src, size_t count) local_irq_save(flags); __arch_local_irq_stnsm(0xfbUL); rc = __memcpy_real(dest, src, count); - local_irq_restore(flags); + if (!arch_irqs_disabled_flags(flags)) + trace_hardirqs_on(); + __arch_local_irq_ssm(flags); return rc; } -- cgit v1.2.3 From f6c9b160233f9b5afe926b91b55589b706076640 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 10 Feb 2016 14:13:24 +0100 Subject: s390/diag: avoid lockdep recursion The diagnose tracer will indirectly call back into the lockdep code when lockdep does not expect it (arch_spinlock). This causes lockdep to disable itself and therefore we don't have a working lock dependency validator anymore. This patch effectively disables tracing of diag 0x9c and 0x44 if lockdep is enabled. If however lockdep is enabled spinlocks are mainly implemented using a trylock variant, which will not issue any diag 0x9c or 0x44. So this change has hardly any effect on tracing except when arch_spinlock and friends are explicitly used. Reported-and-Tested-by: David Hildenbrand Signed-off-by: Heiko Carstens Reviewed-by: David Hildenbrand Acked-by: Martin Schwidefsky Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/trace.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/s390/kernel/trace.c b/arch/s390/kernel/trace.c index 21a5df99552b..dde7654f5c68 100644 --- a/arch/s390/kernel/trace.c +++ b/arch/s390/kernel/trace.c @@ -18,6 +18,9 @@ void trace_s390_diagnose_norecursion(int diag_nr) unsigned long flags; unsigned int *depth; + /* Avoid lockdep recursion. */ + if (IS_ENABLED(CONFIG_LOCKDEP)) + return; local_irq_save(flags); depth = this_cpu_ptr(&diagnose_trace_depth); if (*depth == 0) { -- cgit v1.2.3 From 3c5b1d92b3b02be07873d611a27950addff544d3 Mon Sep 17 00:00:00 2001 From: Tirumalesh Chalamarla Date: Wed, 10 Feb 2016 10:46:53 -0800 Subject: arm64: KVM: Configure TCR_EL2.PS at runtime Setting TCR_EL2.PS to 40 bits is wrong on systems with less that less than 40 bits of physical addresses. and breaks KVM on systems where the RAM is above 40 bits. This patch uses ID_AA64MMFR0_EL1.PARange to set TCR_EL2.PS dynamically, just like we already do for VTCR_EL2.PS. [Marc: rewrote commit message, patch tidy up] Reviewed-by: Marc Zyngier Signed-off-by: Tirumalesh Chalamarla Signed-off-by: Marc Zyngier --- arch/arm64/include/asm/kvm_arm.h | 2 -- arch/arm64/kvm/hyp-init.S | 12 +++++++----- 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index bef6e9243c63..d201d4b396d1 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h @@ -107,8 +107,6 @@ #define TCR_EL2_MASK (TCR_EL2_TG0 | TCR_EL2_SH0 | \ TCR_EL2_ORGN0 | TCR_EL2_IRGN0 | TCR_EL2_T0SZ) -#define TCR_EL2_FLAGS (TCR_EL2_RES1 | TCR_EL2_PS_40B) - /* VTCR_EL2 Registers bits */ #define VTCR_EL2_RES1 (1 << 31) #define VTCR_EL2_PS_MASK (7 << 16) diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S index 3e568dcd907b..d073b5a216f7 100644 --- a/arch/arm64/kvm/hyp-init.S +++ b/arch/arm64/kvm/hyp-init.S @@ -64,7 +64,7 @@ __do_hyp_init: mrs x4, tcr_el1 ldr x5, =TCR_EL2_MASK and x4, x4, x5 - ldr x5, =TCR_EL2_FLAGS + mov x5, #TCR_EL2_RES1 orr x4, x4, x5 #ifndef CONFIG_ARM64_VA_BITS_48 @@ -85,15 +85,17 @@ __do_hyp_init: ldr_l x5, idmap_t0sz bfi x4, x5, TCR_T0SZ_OFFSET, TCR_TxSZ_WIDTH #endif - msr tcr_el2, x4 - - ldr x4, =VTCR_EL2_FLAGS /* * Read the PARange bits from ID_AA64MMFR0_EL1 and set the PS bits in - * VTCR_EL2. + * TCR_EL2 and VTCR_EL2. */ mrs x5, ID_AA64MMFR0_EL1 bfi x4, x5, #16, #3 + + msr tcr_el2, x4 + + ldr x4, =VTCR_EL2_FLAGS + bfi x4, x5, #16, #3 /* * Read the VMIDBits bits from ID_AA64MMFR1_EL1 and set the VS bit in * VTCR_EL2. -- cgit v1.2.3 From e972c37459c813190461dabfeaac228e00aae259 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 10 Feb 2016 09:25:17 +0100 Subject: ARM: 8519/1: ICST: try other dividends than 1 Since the dawn of time the ICST code has only supported divide by one or hang in an eternal loop. Luckily we were always dividing by one because the reference frequency for the systems using the ICSTs is 24MHz and the [min,max] values for the PLL input if [10,320] MHz for ICST307 and [6,200] for ICST525, so the loop will always terminate immediately without assigning any divisor for the reference frequency. But for the code to make sense, let's insert the missing i++ Reported-by: David Binderman Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/common/icst.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/common/icst.c b/arch/arm/common/icst.c index d3c0e69df259..d7ed252708c5 100644 --- a/arch/arm/common/icst.c +++ b/arch/arm/common/icst.c @@ -62,6 +62,7 @@ icst_hz_to_vco(const struct icst_params *p, unsigned long freq) if (f > p->vco_min && f <= p->vco_max) break; + i++; } while (i < 8); if (i >= 8) -- cgit v1.2.3 From 1ecb4ae5f0aaf48b538b9e90b7b360215a2cf9ed Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 11 Feb 2016 16:13:20 -0800 Subject: arch/x86/Kconfig: CONFIG_X86_UV should depend on CONFIG_EFI arch/x86/built-in.o: In function `uv_bios_call': (.text+0xeba00): undefined reference to `efi_call' Reported-by: kbuild test robot Suggested-by: "H. Peter Anvin" Cc: Ingo Molnar Reviewed-by: Matt Fleming Acked-by: Alex Thorlton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 9af2e6338400..ab2ed5328f0a 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -475,6 +475,7 @@ config X86_UV depends on X86_64 depends on X86_EXTENDED_PLATFORM depends on NUMA + depends on EFI depends on X86_X2APIC depends on PCI ---help--- -- cgit v1.2.3 From 37eda9df5bd8444263418495632ea6ec750f03f9 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 10 Feb 2016 06:52:07 +0530 Subject: ARC: mm: Introduce explicit super page size support MMUv4 supports 2 concurrent page sizes: Normal and Super [4K to 16M] So far Linux supported a single super page size for a given Normal page, depending on the software page walking address split. e.g. we had 11:8:13 address split for 8K page, which meant super page was 2 ^(8+13) = 2M (given that THP size has to be PMD_SHIFT) Now we turn this around, by allowing multiple Super Pages in Kconfig (currently 2M and 16M only) and forcing page walker address split to PGDIR_SHIFT and PAGE_SHIFT For configs without Super page, things are same as before and PGDIR_SHIFT can be hacked to get non default address split The motivation for this change is a customer who needs 16M super page and a 8K Normal page combo. Signed-off-by: Vineet Gupta --- arch/arc/Kconfig | 19 ++++++++++++++++++ arch/arc/include/asm/pgtable.h | 45 ++++++++++++++++++++++++------------------ 2 files changed, 45 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index bb15e8062b1f..63979c7eede5 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -341,6 +341,19 @@ config ARC_PAGE_SIZE_4K endchoice +choice + prompt "MMU Super Page Size" + depends on ISA_ARCV2 && TRANSPARENT_HUGEPAGE + default ARC_HUGEPAGE_2M + +config ARC_HUGEPAGE_2M + bool "2MB" + +config ARC_HUGEPAGE_16M + bool "16MB" + +endchoice + if ISA_ARCOMPACT config ARC_COMPACT_IRQ_LEVELS @@ -569,6 +582,12 @@ endmenu endmenu # "ARC Architecture Configuration" source "mm/Kconfig" + +config FORCE_MAX_ZONEORDER + int "Maximum zone order" + default "12" if ARC_HUGEPAGE_16M + default "11" + source "net/Kconfig" source "drivers/Kconfig" source "fs/Kconfig" diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index 57af2f05ae84..d426d4215513 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -179,37 +179,44 @@ #define __S111 PAGE_U_X_W_R /**************************************************************** - * Page Table Lookup split + * 2 tier (PGD:PTE) software page walker * - * We implement 2 tier paging and since this is all software, we are free - * to customize the span of a PGD / PTE entry to suit us - * - * 32 bit virtual address + * [31] 32 bit virtual address [0] * ------------------------------------------------------- - * | BITS_FOR_PGD | BITS_FOR_PTE | BITS_IN_PAGE | + * | | <------------ PGDIR_SHIFT ----------> | + * | | | + * | BITS_FOR_PGD | BITS_FOR_PTE | <-- PAGE_SHIFT --> | * ------------------------------------------------------- * | | | * | | --> off in page frame - * | | * | ---> index into Page Table - * | * ----> index into Page Directory + * + * In a single page size configuration, only PAGE_SHIFT is fixed + * So both PGD and PTE sizing can be tweaked + * e.g. 8K page (PAGE_SHIFT 13) can have + * - PGDIR_SHIFT 21 -> 11:8:13 address split + * - PGDIR_SHIFT 24 -> 8:11:13 address split + * + * If Super Page is configured, PGDIR_SHIFT becomes fixed too, + * so the sizing flexibility is gone. */ -#define BITS_IN_PAGE PAGE_SHIFT - -/* Optimal Sizing of Pg Tbl - based on MMU page size */ -#if defined(CONFIG_ARC_PAGE_SIZE_8K) -#define BITS_FOR_PTE 8 /* 11:8:13 */ -#elif defined(CONFIG_ARC_PAGE_SIZE_16K) -#define BITS_FOR_PTE 8 /* 10:8:14 */ -#elif defined(CONFIG_ARC_PAGE_SIZE_4K) -#define BITS_FOR_PTE 9 /* 11:9:12 */ +#if defined(CONFIG_ARC_HUGEPAGE_16M) +#define PGDIR_SHIFT 24 +#elif defined(CONFIG_ARC_HUGEPAGE_2M) +#define PGDIR_SHIFT 21 +#else +/* + * Only Normal page support so "hackable" (see comment above) + * Default value provides 11:8:13 (8K), 11:9:12 (4K) + */ +#define PGDIR_SHIFT 21 #endif -#define BITS_FOR_PGD (32 - BITS_FOR_PTE - BITS_IN_PAGE) +#define BITS_FOR_PTE (PGDIR_SHIFT - PAGE_SHIFT) +#define BITS_FOR_PGD (32 - PGDIR_SHIFT) -#define PGDIR_SHIFT (32 - BITS_FOR_PGD) #define PGDIR_SIZE (1UL << PGDIR_SHIFT) /* vaddr span, not PDG sz */ #define PGDIR_MASK (~(PGDIR_SIZE-1)) -- cgit v1.2.3 From a80a0eb70c358f8c7dda4bb62b2278dc6285217b Mon Sep 17 00:00:00 2001 From: Yang Shi Date: Thu, 11 Feb 2016 13:53:10 -0800 Subject: arm64: make irq_stack_ptr more robust Switching between stacks is only valid if we are tracing ourselves while on the irq_stack, so it is only valid when in current and non-preemptible context, otherwise is is just zeroed off. Fixes: 132cd887b5c5 ("arm64: Modify stack trace and dump for use with irq_stack") Acked-by: James Morse Tested-by: James Morse Signed-off-by: Yang Shi Signed-off-by: Will Deacon --- arch/arm64/kernel/stacktrace.c | 13 ++++++------- arch/arm64/kernel/traps.c | 11 ++++++++++- 2 files changed, 16 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c index 12a18cbc4295..d9751a4769e7 100644 --- a/arch/arm64/kernel/stacktrace.c +++ b/arch/arm64/kernel/stacktrace.c @@ -44,14 +44,13 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame) unsigned long irq_stack_ptr; /* - * Use raw_smp_processor_id() to avoid false-positives from - * CONFIG_DEBUG_PREEMPT. get_wchan() calls unwind_frame() on sleeping - * task stacks, we can be pre-empted in this case, so - * {raw_,}smp_processor_id() may give us the wrong value. Sleeping - * tasks can't ever be on an interrupt stack, so regardless of cpu, - * the checks will always fail. + * Switching between stacks is valid when tracing current and in + * non-preemptible context. */ - irq_stack_ptr = IRQ_STACK_PTR(raw_smp_processor_id()); + if (tsk == current && !preemptible()) + irq_stack_ptr = IRQ_STACK_PTR(smp_processor_id()); + else + irq_stack_ptr = 0; low = frame->sp; /* irq stacks are not THREAD_SIZE aligned */ diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index cbedd724f48e..c5392081b49b 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -146,9 +146,18 @@ static void dump_instr(const char *lvl, struct pt_regs *regs) static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk) { struct stackframe frame; - unsigned long irq_stack_ptr = IRQ_STACK_PTR(smp_processor_id()); + unsigned long irq_stack_ptr; int skip; + /* + * Switching between stacks is valid when tracing current and in + * non-preemptible context. + */ + if (tsk == current && !preemptible()) + irq_stack_ptr = IRQ_STACK_PTR(smp_processor_id()); + else + irq_stack_ptr = 0; + pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk); if (!tsk) -- cgit v1.2.3 From 126df08c52375817c237f38c3bcd01d78a60c090 Mon Sep 17 00:00:00 2001 From: Denis Kirjanov Date: Mon, 14 Dec 2015 23:18:06 +0300 Subject: powerpc/pseries: Don't trace hcalls on offline CPUs If a cpu is hotplugged while the hcall trace points are active, it's possible to hit a warning from RCU due to the trace points calling into RCU from an offline cpu, eg: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 1 Make the hypervisor tracepoints conditional by using TRACE_EVENT_FN_COND. Acked-by: Steven Rostedt Signed-off-by: Denis Kirjanov Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/trace.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/trace.h b/arch/powerpc/include/asm/trace.h index 8e86b48d0369..32e36b16773f 100644 --- a/arch/powerpc/include/asm/trace.h +++ b/arch/powerpc/include/asm/trace.h @@ -57,12 +57,14 @@ DEFINE_EVENT(ppc64_interrupt_class, timer_interrupt_exit, extern void hcall_tracepoint_regfunc(void); extern void hcall_tracepoint_unregfunc(void); -TRACE_EVENT_FN(hcall_entry, +TRACE_EVENT_FN_COND(hcall_entry, TP_PROTO(unsigned long opcode, unsigned long *args), TP_ARGS(opcode, args), + TP_CONDITION(cpu_online(raw_smp_processor_id())), + TP_STRUCT__entry( __field(unsigned long, opcode) ), @@ -76,13 +78,15 @@ TRACE_EVENT_FN(hcall_entry, hcall_tracepoint_regfunc, hcall_tracepoint_unregfunc ); -TRACE_EVENT_FN(hcall_exit, +TRACE_EVENT_FN_COND(hcall_exit, TP_PROTO(unsigned long opcode, unsigned long retval, unsigned long *retbuf), TP_ARGS(opcode, retval, retbuf), + TP_CONDITION(cpu_online(raw_smp_processor_id())), + TP_STRUCT__entry( __field(unsigned long, opcode) __field(unsigned long, retval) -- cgit v1.2.3 From 05ba75f848647135f063199dc0e9f40fee769724 Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Tue, 9 Feb 2016 15:50:21 +1100 Subject: powerpc/eeh: Fix stale cached primary bus When PE is created, its primary bus is cached to pe->bus. At later point, the cached primary bus is returned from eeh_pe_bus_get(). However, we could get stale cached primary bus and run into kernel crash in one case: full hotplug as part of fenced PHB error recovery releases all PCI busses under the PHB at unplugging time and recreate them at plugging time. pe->bus is still dereferencing the PCI bus that was released. This adds another PE flag (EEH_PE_PRI_BUS) to represent the validity of pe->bus. pe->bus is updated when its first child EEH device is online and the flag is set. Before unplugging in full hotplug for error recovery, the flag is cleared. Fixes: 8cdb2833 ("powerpc/eeh: Trace PCI bus from PE") Cc: stable@vger.kernel.org #v3.11+ Reported-by: Andrew Donnellan Reported-by: Pradipta Ghosh Signed-off-by: Gavin Shan Tested-by: Andrew Donnellan Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/eeh.h | 1 + arch/powerpc/kernel/eeh_driver.c | 3 +++ arch/powerpc/kernel/eeh_pe.c | 2 +- arch/powerpc/platforms/powernv/eeh-powernv.c | 5 ++++- 4 files changed, 9 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h index c5eb86f3d452..867c39b45df6 100644 --- a/arch/powerpc/include/asm/eeh.h +++ b/arch/powerpc/include/asm/eeh.h @@ -81,6 +81,7 @@ struct pci_dn; #define EEH_PE_KEEP (1 << 8) /* Keep PE on hotplug */ #define EEH_PE_CFG_RESTRICTED (1 << 9) /* Block config on error */ #define EEH_PE_REMOVED (1 << 10) /* Removed permanently */ +#define EEH_PE_PRI_BUS (1 << 11) /* Cached primary bus */ struct eeh_pe { int type; /* PE type: PHB/Bus/Device */ diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index 8d14feb40f12..f69ecaa7ce33 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -564,6 +564,7 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus) */ eeh_pe_state_mark(pe, EEH_PE_KEEP); if (bus) { + eeh_pe_state_clear(pe, EEH_PE_PRI_BUS); pci_lock_rescan_remove(); pcibios_remove_pci_devices(bus); pci_unlock_rescan_remove(); @@ -803,6 +804,7 @@ perm_error: * the their PCI config any more. */ if (frozen_bus) { + eeh_pe_state_clear(pe, EEH_PE_PRI_BUS); eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED); pci_lock_rescan_remove(); @@ -886,6 +888,7 @@ static void eeh_handle_special_event(void) continue; /* Notify all devices to be down */ + eeh_pe_state_clear(pe, EEH_PE_PRI_BUS); bus = eeh_pe_bus_get(phb_pe); eeh_pe_dev_traverse(pe, eeh_report_failure, NULL); diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c index ca9e5371930e..98f81800e00c 100644 --- a/arch/powerpc/kernel/eeh_pe.c +++ b/arch/powerpc/kernel/eeh_pe.c @@ -928,7 +928,7 @@ struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe) bus = pe->phb->bus; } else if (pe->type & EEH_PE_BUS || pe->type & EEH_PE_DEVICE) { - if (pe->bus) { + if (pe->state & EEH_PE_PRI_BUS) { bus = pe->bus; goto out; } diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c index 5f152b95ca0c..87f47e55aab6 100644 --- a/arch/powerpc/platforms/powernv/eeh-powernv.c +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c @@ -444,9 +444,12 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data) * PCI devices of the PE are expected to be removed prior * to PE reset. */ - if (!edev->pe->bus) + if (!(edev->pe->state & EEH_PE_PRI_BUS)) { edev->pe->bus = pci_find_bus(hose->global_number, pdn->busno); + if (edev->pe->bus) + edev->pe->state |= EEH_PE_PRI_BUS; + } /* * Enable EEH explicitly so that we will do EEH check -- cgit v1.2.3 From 1bc74f1ccd457832dc515fc1febe6655985fdcd2 Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Tue, 9 Feb 2016 15:50:22 +1100 Subject: powerpc/powernv: Fix stale PE primary bus When PCI bus is unplugged during full hotplug for EEH recovery, the platform PE instance (struct pnv_ioda_pe) isn't released and it dereferences the stale PCI bus that has been released. It leads to kernel crash when referring to the stale PCI bus. This fixes the issue by correcting the PE's primary bus when it's oneline at plugging time, in pnv_pci_dma_bus_setup() which is to be called by pcibios_fixup_bus(). Cc: stable@vger.kernel.org # v4.1+ Reported-by: Andrew Donnellan Reported-by: Pradipta Ghosh Signed-off-by: Gavin Shan Tested-by: Andrew Donnellan Signed-off-by: Michael Ellerman --- arch/powerpc/platforms/powernv/pci-ioda.c | 1 + arch/powerpc/platforms/powernv/pci.c | 20 ++++++++++++++++++++ arch/powerpc/platforms/powernv/pci.h | 1 + 3 files changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 573ae1994097..f90dc04395bf 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -3180,6 +3180,7 @@ static void pnv_pci_ioda_shutdown(struct pci_controller *hose) static const struct pci_controller_ops pnv_pci_ioda_controller_ops = { .dma_dev_setup = pnv_pci_dma_dev_setup, + .dma_bus_setup = pnv_pci_dma_bus_setup, #ifdef CONFIG_PCI_MSI .setup_msi_irqs = pnv_setup_msi_irqs, .teardown_msi_irqs = pnv_teardown_msi_irqs, diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index 2f55c86df703..d25ff2292ae2 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -760,6 +760,26 @@ void pnv_pci_dma_dev_setup(struct pci_dev *pdev) phb->dma_dev_setup(phb, pdev); } +void pnv_pci_dma_bus_setup(struct pci_bus *bus) +{ + struct pci_controller *hose = bus->sysdata; + struct pnv_phb *phb = hose->private_data; + struct pnv_ioda_pe *pe; + + list_for_each_entry(pe, &phb->ioda.pe_list, list) { + if (!(pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL))) + continue; + + if (!pe->pbus) + continue; + + if (bus->number == ((pe->rid >> 8) & 0xFF)) { + pe->pbus = bus; + break; + } + } +} + void pnv_pci_shutdown(void) { struct pci_controller *hose; diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index 7f56313e8d72..00691a9b99af 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -242,6 +242,7 @@ extern void pnv_pci_reset_secondary_bus(struct pci_dev *dev); extern int pnv_eeh_phb_reset(struct pci_controller *hose, int option); extern void pnv_pci_dma_dev_setup(struct pci_dev *pdev); +extern void pnv_pci_dma_bus_setup(struct pci_bus *bus); extern int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type); extern void pnv_teardown_msi_irqs(struct pci_dev *pdev); -- cgit v1.2.3 From c777e2a8b65420b31dac28a453e35be984f5808b Mon Sep 17 00:00:00 2001 From: Aneesh Kumar K.V Date: Tue, 9 Feb 2016 06:50:31 +0530 Subject: powerpc/mm: Fix Multi hit ERAT cause by recent THP update With ppc64 we use the deposited pgtable_t to store the hash pte slot information. We should not withdraw the deposited pgtable_t without marking the pmd none. This ensure that low level hash fault handling will skip this huge pte and we will handle them at upper levels. Recent change to pmd splitting changed the above in order to handle the race between pmd split and exit_mmap. The race is explained below. Consider following race: CPU0 CPU1 shrink_page_list() add_to_swap() split_huge_page_to_list() __split_huge_pmd_locked() pmdp_huge_clear_flush_notify() // pmd_none() == true exit_mmap() unmap_vmas() zap_pmd_range() // no action on pmd since pmd_none() == true pmd_populate() As result the THP will not be freed. The leak is detected by check_mm(): BUG: Bad rss-counter state mm:ffff880058d2e580 idx:1 val:512 The above required us to not mark pmd none during a pmd split. The fix for ppc is to clear the huge pte of _PAGE_USER, so that low level fault handling code skip this pte. At higher level we do take ptl lock. That should serialze us against the pmd split. Once the lock is acquired we do check the pmd again using pmd_same. That should always return false for us and hence we should retry the access. We do the pmd_same check in all case after taking plt with THP (do_huge_pmd_wp_page, do_huge_pmd_numa_page and huge_pmd_set_accessed) Also make sure we wait for irq disable section in other cpus to finish before flipping a huge pte entry with a regular pmd entry. Code paths like find_linux_pte_or_hugepte depend on irq disable to get a stable pte_t pointer. A parallel thp split need to make sure we don't convert a pmd pte to a regular pmd entry without waiting for the irq disable section to finish. Fixes: eef1b3ba053a ("thp: implement split_huge_pmd()") Acked-by: Kirill A. Shutemov Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/book3s/64/pgtable.h | 4 ++++ arch/powerpc/mm/pgtable_64.c | 32 ++++++++++++++++++++++++++++ include/asm-generic/pgtable.h | 8 +++++++ mm/huge_memory.c | 1 + 4 files changed, 45 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h index 8d1c41d28318..ac07a30a7934 100644 --- a/arch/powerpc/include/asm/book3s/64/pgtable.h +++ b/arch/powerpc/include/asm/book3s/64/pgtable.h @@ -281,6 +281,10 @@ extern pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp); extern void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address, pmd_t *pmdp); +#define __HAVE_ARCH_PMDP_HUGE_SPLIT_PREPARE +extern void pmdp_huge_split_prepare(struct vm_area_struct *vma, + unsigned long address, pmd_t *pmdp); + #define pmd_move_must_withdraw pmd_move_must_withdraw struct spinlock; static inline int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl, diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index 3124a20d0fab..cdf2123d46db 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -646,6 +646,28 @@ pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp) return pgtable; } +void pmdp_huge_split_prepare(struct vm_area_struct *vma, + unsigned long address, pmd_t *pmdp) +{ + VM_BUG_ON(address & ~HPAGE_PMD_MASK); + VM_BUG_ON(REGION_ID(address) != USER_REGION_ID); + + /* + * We can't mark the pmd none here, because that will cause a race + * against exit_mmap. We need to continue mark pmd TRANS HUGE, while + * we spilt, but at the same time we wan't rest of the ppc64 code + * not to insert hash pte on this, because we will be modifying + * the deposited pgtable in the caller of this function. Hence + * clear the _PAGE_USER so that we move the fault handling to + * higher level function and that will serialize against ptl. + * We need to flush existing hash pte entries here even though, + * the translation is still valid, because we will withdraw + * pgtable_t after this. + */ + pmd_hugepage_update(vma->vm_mm, address, pmdp, _PAGE_USER, 0); +} + + /* * set a new huge pmd. We should not be called for updating * an existing pmd entry. That should go via pmd_hugepage_update. @@ -663,10 +685,20 @@ void set_pmd_at(struct mm_struct *mm, unsigned long addr, return set_pte_at(mm, addr, pmdp_ptep(pmdp), pmd_pte(pmd)); } +/* + * We use this to invalidate a pmdp entry before switching from a + * hugepte to regular pmd entry. + */ void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address, pmd_t *pmdp) { pmd_hugepage_update(vma->vm_mm, address, pmdp, _PAGE_PRESENT, 0); + + /* + * This ensures that generic code that rely on IRQ disabling + * to prevent a parallel THP split work as expected. + */ + kick_all_cpus_sync(); } /* diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index 0b3c0d39ef75..c370b261c720 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -239,6 +239,14 @@ extern void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address, pmd_t *pmdp); #endif +#ifndef __HAVE_ARCH_PMDP_HUGE_SPLIT_PREPARE +static inline void pmdp_huge_split_prepare(struct vm_area_struct *vma, + unsigned long address, pmd_t *pmdp) +{ + +} +#endif + #ifndef __HAVE_ARCH_PTE_SAME static inline int pte_same(pte_t pte_a, pte_t pte_b) { diff --git a/mm/huge_memory.c b/mm/huge_memory.c index b1cf73bc3b12..de3f43cde129 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -2856,6 +2856,7 @@ static void __split_huge_pmd_locked(struct vm_area_struct *vma, pmd_t *pmd, young = pmd_young(*pmd); dirty = pmd_dirty(*pmd); + pmdp_huge_split_prepare(vma, haddr, pmd); pgtable = pgtable_trans_huge_withdraw(mm, pmd); pmd_populate(mm, &_pmd, pgtable); -- cgit v1.2.3 From bee038a4bd2efe8188cc80dfdad706a9abe568ad Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Fri, 12 Feb 2016 09:47:52 -0600 Subject: arm/arm64: crypto: assure that ECB modes don't require an IV ECB modes don't use an initialization vector. The kernel /proc/crypto interface doesn't reflect this properly. Acked-by: Ard Biesheuvel Signed-off-by: Jeremy Linton Signed-off-by: Will Deacon --- arch/arm/crypto/aes-ce-glue.c | 4 ++-- arch/arm64/crypto/aes-glue.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c index b445a5d56f43..89a3a3e592d6 100644 --- a/arch/arm/crypto/aes-ce-glue.c +++ b/arch/arm/crypto/aes-ce-glue.c @@ -364,7 +364,7 @@ static struct crypto_alg aes_algs[] = { { .cra_blkcipher = { .min_keysize = AES_MIN_KEY_SIZE, .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, + .ivsize = 0, .setkey = ce_aes_setkey, .encrypt = ecb_encrypt, .decrypt = ecb_decrypt, @@ -441,7 +441,7 @@ static struct crypto_alg aes_algs[] = { { .cra_ablkcipher = { .min_keysize = AES_MIN_KEY_SIZE, .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, + .ivsize = 0, .setkey = ablk_set_key, .encrypt = ablk_encrypt, .decrypt = ablk_decrypt, diff --git a/arch/arm64/crypto/aes-glue.c b/arch/arm64/crypto/aes-glue.c index 05d9e16c0dfd..7a3d22a46faf 100644 --- a/arch/arm64/crypto/aes-glue.c +++ b/arch/arm64/crypto/aes-glue.c @@ -294,7 +294,7 @@ static struct crypto_alg aes_algs[] = { { .cra_blkcipher = { .min_keysize = AES_MIN_KEY_SIZE, .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, + .ivsize = 0, .setkey = aes_setkey, .encrypt = ecb_encrypt, .decrypt = ecb_decrypt, @@ -371,7 +371,7 @@ static struct crypto_alg aes_algs[] = { { .cra_ablkcipher = { .min_keysize = AES_MIN_KEY_SIZE, .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, + .ivsize = 0, .setkey = ablk_set_key, .encrypt = ablk_encrypt, .decrypt = ablk_decrypt, -- cgit v1.2.3 From 7f4e346263f59ff50b531dda94609fb13ca12401 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Tue, 16 Feb 2016 11:16:31 +0100 Subject: arm64/efi: Make strnlen() available to the EFI namespace Changes introduced in the upstream version of libfdt pulled in by commit 91feabc2e224 ("scripts/dtc: Update to upstream commit b06e55c88b9b") use the strnlen() function, which isn't currently available to the EFI name- space. Add it to the EFI namespace to avoid a linker error. Cc: Catalin Marinas Cc: Rob Herring Reviewed-by: Ard Biesheuvel Signed-off-by: Thierry Reding Signed-off-by: Will Deacon --- arch/arm64/kernel/image.h | 1 + arch/arm64/lib/strnlen.S | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/kernel/image.h b/arch/arm64/kernel/image.h index 999633bd7294..352f7abd91c9 100644 --- a/arch/arm64/kernel/image.h +++ b/arch/arm64/kernel/image.h @@ -89,6 +89,7 @@ __efistub_memcpy = KALLSYMS_HIDE(__pi_memcpy); __efistub_memmove = KALLSYMS_HIDE(__pi_memmove); __efistub_memset = KALLSYMS_HIDE(__pi_memset); __efistub_strlen = KALLSYMS_HIDE(__pi_strlen); +__efistub_strnlen = KALLSYMS_HIDE(__pi_strnlen); __efistub_strcmp = KALLSYMS_HIDE(__pi_strcmp); __efistub_strncmp = KALLSYMS_HIDE(__pi_strncmp); __efistub___flush_dcache_area = KALLSYMS_HIDE(__pi___flush_dcache_area); diff --git a/arch/arm64/lib/strnlen.S b/arch/arm64/lib/strnlen.S index 2ca665711bf2..eae38da6e0bb 100644 --- a/arch/arm64/lib/strnlen.S +++ b/arch/arm64/lib/strnlen.S @@ -168,4 +168,4 @@ CPU_LE( lsr tmp2, tmp2, tmp4 ) /* Shift (tmp1 & 63). */ .Lhit_limit: mov len, limit ret -ENDPROC(strnlen) +ENDPIPROC(strnlen) -- cgit v1.2.3 From 8bc9162cd2bf37036c486b384ac445b59b334b04 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 16 Feb 2016 23:04:41 +0100 Subject: perf/x86/amd/uncore: Plug reference leak In the error path of amd_uncore_cpu_up_prepare() the newly allocated uncore struct is freed, but the percpu pointer still references it. Set it to NULL. Signed-off-by: Thomas Gleixner Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Vince Weaver Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1602162302170.19512@nanos Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_amd_uncore.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event_amd_uncore.c b/arch/x86/kernel/cpu/perf_event_amd_uncore.c index 49742746a6c9..8836fc9fa84b 100644 --- a/arch/x86/kernel/cpu/perf_event_amd_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_amd_uncore.c @@ -323,6 +323,8 @@ static int amd_uncore_cpu_up_prepare(unsigned int cpu) return 0; fail: + if (amd_uncore_nb) + *per_cpu_ptr(amd_uncore_nb, cpu) = NULL; kfree(uncore_nb); return -ENOMEM; } -- cgit v1.2.3 From 52499d93d6dec3872de3b982219af6d4c182a452 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 12 Feb 2016 12:40:31 +0100 Subject: s390/maccess: reduce stnsm instructions When fixing the DAT off bug ("s390: fix DAT off memory access, e.g. on kdump") both Christian and I missed that we can save an additional stnsm instruction. This saves us a couple of cycles which could improve the speed of memcpy_real. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/mm/maccess.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c index 350b0acd7f52..792f9c63fbca 100644 --- a/arch/s390/mm/maccess.c +++ b/arch/s390/mm/maccess.c @@ -93,15 +93,17 @@ static int __memcpy_real(void *dest, void *src, size_t count) */ int memcpy_real(void *dest, void *src, size_t count) { + int irqs_disabled, rc; unsigned long flags; - int rc; if (!count) return 0; - local_irq_save(flags); - __arch_local_irq_stnsm(0xfbUL); + flags = __arch_local_irq_stnsm(0xf8UL); + irqs_disabled = arch_irqs_disabled_flags(flags); + if (!irqs_disabled) + trace_hardirqs_off(); rc = __memcpy_real(dest, src, count); - if (!arch_irqs_disabled_flags(flags)) + if (!irqs_disabled) trace_hardirqs_on(); __arch_local_irq_ssm(flags); return rc; -- cgit v1.2.3 From ee9737c924706aaa72c2ead93e3ad5644681dc1c Mon Sep 17 00:00:00 2001 From: Toshi Kani Date: Thu, 11 Feb 2016 14:24:16 -0700 Subject: x86/uaccess/64: Make the __copy_user_nocache() assembly code more readable Add comments to __copy_user_nocache() to clarify its procedures and alignment requirements. Also change numeric branch target labels to named local labels. No code changed: arch/x86/lib/copy_user_64.o: text data bss dec hex filename 1239 0 0 1239 4d7 copy_user_64.o.before 1239 0 0 1239 4d7 copy_user_64.o.after md5: 58bed94c2db98c1ca9a2d46d0680aaae copy_user_64.o.before.asm 58bed94c2db98c1ca9a2d46d0680aaae copy_user_64.o.after.asm Signed-off-by: Toshi Kani Cc: Cc: Andrew Morton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Luis R. Rodriguez Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Toshi Kani Cc: brian.boylston@hpe.com Cc: dan.j.williams@intel.com Cc: linux-nvdimm@lists.01.org Cc: micah.parrish@hpe.com Cc: ross.zwisler@linux.intel.com Cc: vishal.l.verma@intel.com Link: http://lkml.kernel.org/r/1455225857-12039-2-git-send-email-toshi.kani@hpe.com [ Small readability edits and added object file comparison. ] Signed-off-by: Ingo Molnar --- arch/x86/lib/copy_user_64.S | 114 ++++++++++++++++++++++++++++---------------- 1 file changed, 73 insertions(+), 41 deletions(-) (limited to 'arch') diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S index 982ce34f4a9b..a644aad1f112 100644 --- a/arch/x86/lib/copy_user_64.S +++ b/arch/x86/lib/copy_user_64.S @@ -232,17 +232,30 @@ ENDPROC(copy_user_enhanced_fast_string) /* * copy_user_nocache - Uncached memory copy with exception handling - * This will force destination/source out of cache for more performance. + * This will force destination out of cache for more performance. + * + * Note: Cached memory copy is used when destination or size is not + * naturally aligned. That is: + * - Require 8-byte alignment when size is 8 bytes or larger. */ ENTRY(__copy_user_nocache) ASM_STAC + + /* If size is less than 8 bytes, go to byte copy */ cmpl $8,%edx - jb 20f /* less then 8 bytes, go to byte copy loop */ + jb .L_1b_cache_copy_entry + + /* If destination is not 8-byte aligned, "cache" copy to align it */ ALIGN_DESTINATION + + /* Set 4x8-byte copy count and remainder */ movl %edx,%ecx andl $63,%edx shrl $6,%ecx - jz 17f + jz .L_8b_nocache_copy_entry /* jump if count is 0 */ + + /* Perform 4x8-byte nocache loop-copy */ +.L_4x8b_nocache_copy_loop: 1: movq (%rsi),%r8 2: movq 1*8(%rsi),%r9 3: movq 2*8(%rsi),%r10 @@ -262,60 +275,79 @@ ENTRY(__copy_user_nocache) leaq 64(%rsi),%rsi leaq 64(%rdi),%rdi decl %ecx - jnz 1b -17: movl %edx,%ecx + jnz .L_4x8b_nocache_copy_loop + + /* Set 8-byte copy count and remainder */ +.L_8b_nocache_copy_entry: + movl %edx,%ecx andl $7,%edx shrl $3,%ecx - jz 20f -18: movq (%rsi),%r8 -19: movnti %r8,(%rdi) + jz .L_1b_cache_copy_entry /* jump if count is 0 */ + + /* Perform 8-byte nocache loop-copy */ +.L_8b_nocache_copy_loop: +20: movq (%rsi),%r8 +21: movnti %r8,(%rdi) leaq 8(%rsi),%rsi leaq 8(%rdi),%rdi decl %ecx - jnz 18b -20: andl %edx,%edx - jz 23f + jnz .L_8b_nocache_copy_loop + + /* If no byte left, we're done */ +.L_1b_cache_copy_entry: + andl %edx,%edx + jz .L_finish_copy + + /* Perform byte "cache" loop-copy for the remainder */ movl %edx,%ecx -21: movb (%rsi),%al -22: movb %al,(%rdi) +.L_1b_cache_copy_loop: +40: movb (%rsi),%al +41: movb %al,(%rdi) incq %rsi incq %rdi decl %ecx - jnz 21b -23: xorl %eax,%eax + jnz .L_1b_cache_copy_loop + + /* Finished copying; fence the prior stores */ +.L_finish_copy: + xorl %eax,%eax ASM_CLAC sfence ret .section .fixup,"ax" -30: shll $6,%ecx +.L_fixup_4x8b_copy: + shll $6,%ecx addl %ecx,%edx - jmp 60f -40: lea (%rdx,%rcx,8),%rdx - jmp 60f -50: movl %ecx,%edx -60: sfence + jmp .L_fixup_handle_tail +.L_fixup_8b_copy: + lea (%rdx,%rcx,8),%rdx + jmp .L_fixup_handle_tail +.L_fixup_1b_copy: + movl %ecx,%edx +.L_fixup_handle_tail: + sfence jmp copy_user_handle_tail .previous - _ASM_EXTABLE(1b,30b) - _ASM_EXTABLE(2b,30b) - _ASM_EXTABLE(3b,30b) - _ASM_EXTABLE(4b,30b) - _ASM_EXTABLE(5b,30b) - _ASM_EXTABLE(6b,30b) - _ASM_EXTABLE(7b,30b) - _ASM_EXTABLE(8b,30b) - _ASM_EXTABLE(9b,30b) - _ASM_EXTABLE(10b,30b) - _ASM_EXTABLE(11b,30b) - _ASM_EXTABLE(12b,30b) - _ASM_EXTABLE(13b,30b) - _ASM_EXTABLE(14b,30b) - _ASM_EXTABLE(15b,30b) - _ASM_EXTABLE(16b,30b) - _ASM_EXTABLE(18b,40b) - _ASM_EXTABLE(19b,40b) - _ASM_EXTABLE(21b,50b) - _ASM_EXTABLE(22b,50b) + _ASM_EXTABLE(1b,.L_fixup_4x8b_copy) + _ASM_EXTABLE(2b,.L_fixup_4x8b_copy) + _ASM_EXTABLE(3b,.L_fixup_4x8b_copy) + _ASM_EXTABLE(4b,.L_fixup_4x8b_copy) + _ASM_EXTABLE(5b,.L_fixup_4x8b_copy) + _ASM_EXTABLE(6b,.L_fixup_4x8b_copy) + _ASM_EXTABLE(7b,.L_fixup_4x8b_copy) + _ASM_EXTABLE(8b,.L_fixup_4x8b_copy) + _ASM_EXTABLE(9b,.L_fixup_4x8b_copy) + _ASM_EXTABLE(10b,.L_fixup_4x8b_copy) + _ASM_EXTABLE(11b,.L_fixup_4x8b_copy) + _ASM_EXTABLE(12b,.L_fixup_4x8b_copy) + _ASM_EXTABLE(13b,.L_fixup_4x8b_copy) + _ASM_EXTABLE(14b,.L_fixup_4x8b_copy) + _ASM_EXTABLE(15b,.L_fixup_4x8b_copy) + _ASM_EXTABLE(16b,.L_fixup_4x8b_copy) + _ASM_EXTABLE(20b,.L_fixup_8b_copy) + _ASM_EXTABLE(21b,.L_fixup_8b_copy) + _ASM_EXTABLE(40b,.L_fixup_1b_copy) + _ASM_EXTABLE(41b,.L_fixup_1b_copy) ENDPROC(__copy_user_nocache) -- cgit v1.2.3 From a82eee7424525e34e98d821dd059ce14560a1e35 Mon Sep 17 00:00:00 2001 From: Toshi Kani Date: Thu, 11 Feb 2016 14:24:17 -0700 Subject: x86/uaccess/64: Handle the caching of 4-byte nocache copies properly in __copy_user_nocache() Data corruption issues were observed in tests which initiated a system crash/reset while accessing BTT devices. This problem is reproducible. The BTT driver calls pmem_rw_bytes() to update data in pmem devices. This interface calls __copy_user_nocache(), which uses non-temporal stores so that the stores to pmem are persistent. __copy_user_nocache() uses non-temporal stores when a request size is 8 bytes or larger (and is aligned by 8 bytes). The BTT driver updates the BTT map table, which entry size is 4 bytes. Therefore, updates to the map table entries remain cached, and are not written to pmem after a crash. Change __copy_user_nocache() to use non-temporal store when a request size is 4 bytes. The change extends the current byte-copy path for a less-than-8-bytes request, and does not add any overhead to the regular path. Reported-and-tested-by: Micah Parrish Reported-and-tested-by: Brian Boylston Signed-off-by: Toshi Kani Cc: Cc: Andrew Morton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Borislav Petkov Cc: Brian Gerst Cc: Dan Williams Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Luis R. Rodriguez Cc: Peter Zijlstra Cc: Ross Zwisler Cc: Thomas Gleixner Cc: Toshi Kani Cc: Vishal Verma Cc: linux-nvdimm@lists.01.org Link: http://lkml.kernel.org/r/1455225857-12039-3-git-send-email-toshi.kani@hpe.com [ Small readability edits. ] Signed-off-by: Ingo Molnar --- arch/x86/lib/copy_user_64.S | 36 ++++++++++++++++++++++++++++++++---- 1 file changed, 32 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S index a644aad1f112..27f89c79a44b 100644 --- a/arch/x86/lib/copy_user_64.S +++ b/arch/x86/lib/copy_user_64.S @@ -237,13 +237,14 @@ ENDPROC(copy_user_enhanced_fast_string) * Note: Cached memory copy is used when destination or size is not * naturally aligned. That is: * - Require 8-byte alignment when size is 8 bytes or larger. + * - Require 4-byte alignment when size is 4 bytes. */ ENTRY(__copy_user_nocache) ASM_STAC - /* If size is less than 8 bytes, go to byte copy */ + /* If size is less than 8 bytes, go to 4-byte copy */ cmpl $8,%edx - jb .L_1b_cache_copy_entry + jb .L_4b_nocache_copy_entry /* If destination is not 8-byte aligned, "cache" copy to align it */ ALIGN_DESTINATION @@ -282,7 +283,7 @@ ENTRY(__copy_user_nocache) movl %edx,%ecx andl $7,%edx shrl $3,%ecx - jz .L_1b_cache_copy_entry /* jump if count is 0 */ + jz .L_4b_nocache_copy_entry /* jump if count is 0 */ /* Perform 8-byte nocache loop-copy */ .L_8b_nocache_copy_loop: @@ -294,11 +295,33 @@ ENTRY(__copy_user_nocache) jnz .L_8b_nocache_copy_loop /* If no byte left, we're done */ -.L_1b_cache_copy_entry: +.L_4b_nocache_copy_entry: + andl %edx,%edx + jz .L_finish_copy + + /* If destination is not 4-byte aligned, go to byte copy: */ + movl %edi,%ecx + andl $3,%ecx + jnz .L_1b_cache_copy_entry + + /* Set 4-byte copy count (1 or 0) and remainder */ + movl %edx,%ecx + andl $3,%edx + shrl $2,%ecx + jz .L_1b_cache_copy_entry /* jump if count is 0 */ + + /* Perform 4-byte nocache copy: */ +30: movl (%rsi),%r8d +31: movnti %r8d,(%rdi) + leaq 4(%rsi),%rsi + leaq 4(%rdi),%rdi + + /* If no bytes left, we're done: */ andl %edx,%edx jz .L_finish_copy /* Perform byte "cache" loop-copy for the remainder */ +.L_1b_cache_copy_entry: movl %edx,%ecx .L_1b_cache_copy_loop: 40: movb (%rsi),%al @@ -323,6 +346,9 @@ ENTRY(__copy_user_nocache) .L_fixup_8b_copy: lea (%rdx,%rcx,8),%rdx jmp .L_fixup_handle_tail +.L_fixup_4b_copy: + lea (%rdx,%rcx,4),%rdx + jmp .L_fixup_handle_tail .L_fixup_1b_copy: movl %ecx,%edx .L_fixup_handle_tail: @@ -348,6 +374,8 @@ ENTRY(__copy_user_nocache) _ASM_EXTABLE(16b,.L_fixup_4x8b_copy) _ASM_EXTABLE(20b,.L_fixup_8b_copy) _ASM_EXTABLE(21b,.L_fixup_8b_copy) + _ASM_EXTABLE(30b,.L_fixup_4b_copy) + _ASM_EXTABLE(31b,.L_fixup_4b_copy) _ASM_EXTABLE(40b,.L_fixup_1b_copy) _ASM_EXTABLE(41b,.L_fixup_1b_copy) ENDPROC(__copy_user_nocache) -- cgit v1.2.3 From 4e7f9df25874cedbbc604a5c5c2e7a6efe662387 Mon Sep 17 00:00:00 2001 From: Michael S. Tsirkin Date: Thu, 11 Feb 2016 01:05:01 +0200 Subject: hpet: Drop stale URLs Looks like the HPET spec at intel.com got moved. It isn't hard to find so drop the link, just mention the revision assumed. Suggested-by: Thomas Gleixner Signed-off-by: Michael S. Tsirkin Acked-by: Greg Kroah-Hartman Cc: Arnd Bergmann Cc: Clemens Ladisch Cc: Jonathan Corbet Cc: Linus Torvalds Cc: Peter Zijlstra Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1455145462-3877-1-git-send-email-mst@redhat.com Signed-off-by: Ingo Molnar --- Documentation/timers/hpet.txt | 4 +--- arch/x86/Kconfig | 4 ++-- drivers/char/hpet.c | 2 +- 3 files changed, 4 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/Documentation/timers/hpet.txt b/Documentation/timers/hpet.txt index 767392ffd31e..a484d2c109d7 100644 --- a/Documentation/timers/hpet.txt +++ b/Documentation/timers/hpet.txt @@ -1,9 +1,7 @@ High Precision Event Timer Driver for Linux The High Precision Event Timer (HPET) hardware follows a specification -by Intel and Microsoft which can be found at - - http://www.intel.com/hardwaredesign/hpetspec_1.pdf +by Intel and Microsoft, revision 1. Each HPET has one fixed-rate counter (at 10+ MHz, hence "High Precision") and up to 32 comparators. Normally three or more comparators are provided, diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index ab2ed5328f0a..c46662f64c39 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -778,8 +778,8 @@ config HPET_TIMER HPET is the next generation timer replacing legacy 8254s. The HPET provides a stable time base on SMP systems, unlike the TSC, but it is more expensive to access, - as it is off-chip. You can find the HPET spec at - . + as it is off-chip. The interface used is documented + in the HPET spec, revision 1. You can safely choose Y here. However, HPET will only be activated if the platform and the BIOS support this feature. diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 240b6cf1d97c..be54e5331a45 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -42,7 +42,7 @@ /* * The High Precision Event Timer driver. * This driver is closely modelled after the rtc.c driver. - * http://www.intel.com/hardwaredesign/hpetspec_1.pdf + * See HPET spec revision 1. */ #define HPET_USER_FREQ (64) #define HPET_DRIFT (500) -- cgit v1.2.3 From 722ec35f7faefcc34d12616eca7976a848870f9d Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 16 Feb 2016 15:14:44 +0100 Subject: arm64: dma-mapping: fix handling of devices registered before arch_initcall This patch ensures that devices, which got registered before arch_initcall will be handled correctly by IOMMU-based DMA-mapping code. Cc: Fixes: 13b8629f6511 ("arm64: Add IOMMU dma_ops") Acked-by: Robin Murphy Signed-off-by: Marek Szyprowski Signed-off-by: Will Deacon --- arch/arm64/mm/dma-mapping.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index 331c4ca6205c..a6e757cbab77 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -933,6 +933,10 @@ static int __init __iommu_dma_init(void) ret = register_iommu_dma_ops_notifier(&platform_bus_type); if (!ret) ret = register_iommu_dma_ops_notifier(&amba_bustype); + + /* handle devices queued before this arch_initcall */ + if (!ret) + __iommu_attach_notifier(NULL, BUS_NOTIFY_ADD_DEVICE, NULL); return ret; } arch_initcall(__iommu_dma_init); -- cgit v1.2.3 From 6ecad912a0073c768db1491c27ca55ad2d0ee68f Mon Sep 17 00:00:00 2001 From: Alexey Kardashevskiy Date: Wed, 17 Feb 2016 18:26:31 +1100 Subject: powerpc/ioda: Set "read" permission when "write" is set Quite often drivers set only "write" permission assuming that this includes "read" permission as well and this works on plenty of platforms. However IODA2 is strict about this and produces an EEH when "read" permission is not set and reading happens. This adds a workaround in the IODA code to always add the "read" bit when the "write" bit is set. Fixes: 10b35b2b7485 ("powerpc/powernv: Do not set "read" flag if direction==DMA_NONE") Cc: stable@vger.kernel.org # 4.2+ Cc: Benjamin Herrenschmidt Signed-off-by: Alexey Kardashevskiy Tested-by: Douglas Miller Signed-off-by: Michael Ellerman --- arch/powerpc/platforms/powernv/pci.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index d25ff2292ae2..b1ef84a6c9d1 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -599,6 +599,9 @@ int pnv_tce_build(struct iommu_table *tbl, long index, long npages, u64 rpn = __pa(uaddr) >> tbl->it_page_shift; long i; + if (proto_tce & TCE_PCI_WRITE) + proto_tce |= TCE_PCI_READ; + for (i = 0; i < npages; i++) { unsigned long newtce = proto_tce | ((rpn + i) << tbl->it_page_shift); @@ -620,6 +623,9 @@ int pnv_tce_xchg(struct iommu_table *tbl, long index, BUG_ON(*hpa & ~IOMMU_PAGE_MASK(tbl)); + if (newtce & TCE_PCI_WRITE) + newtce |= TCE_PCI_READ; + oldtce = xchg(pnv_tce(tbl, idx), cpu_to_be64(newtce)); *hpa = be64_to_cpu(oldtce) & ~(TCE_PCI_READ | TCE_PCI_WRITE); *direction = iommu_tce_direction(oldtce); -- cgit v1.2.3 From f4eafd8bcd5229e998aa252627703b8462c3b90f Mon Sep 17 00:00:00 2001 From: Toshi Kani Date: Wed, 17 Feb 2016 18:16:54 -0700 Subject: x86/mm: Fix vmalloc_fault() to handle large pages properly A kernel page fault oops with the callstack below was observed when a read syscall was made to a pmem device after a huge amount (>512GB) of vmalloc ranges was allocated by ioremap() on a x86_64 system: BUG: unable to handle kernel paging request at ffff880840000ff8 IP: vmalloc_fault+0x1be/0x300 PGD c7f03a067 PUD 0 Oops: 0000 [#1] SM Call Trace: __do_page_fault+0x285/0x3e0 do_page_fault+0x2f/0x80 ? put_prev_entity+0x35/0x7a0 page_fault+0x28/0x30 ? memcpy_erms+0x6/0x10 ? schedule+0x35/0x80 ? pmem_rw_bytes+0x6a/0x190 [nd_pmem] ? schedule_timeout+0x183/0x240 btt_log_read+0x63/0x140 [nd_btt] : ? __symbol_put+0x60/0x60 ? kernel_read+0x50/0x80 SyS_finit_module+0xb9/0xf0 entry_SYSCALL_64_fastpath+0x1a/0xa4 Since v4.1, ioremap() supports large page (pud/pmd) mappings in x86_64 and PAE. vmalloc_fault() however assumes that the vmalloc range is limited to pte mappings. vmalloc faults do not normally happen in ioremap'd ranges since ioremap() sets up the kernel page tables, which are shared by user processes. pgd_ctor() sets the kernel's PGD entries to user's during fork(). When allocation of the vmalloc ranges crosses a 512GB boundary, ioremap() allocates a new pud table and updates the kernel PGD entry to point it. If user process's PGD entry does not have this update yet, a read/write syscall to the range will cause a vmalloc fault, which hits the Oops above as it does not handle a large page properly. Following changes are made to vmalloc_fault(). 64-bit: - No change for the PGD sync operation as it handles large pages already. - Add pud_huge() and pmd_huge() to the validation code to handle large pages. - Change pud_page_vaddr() to pud_pfn() since an ioremap range is not directly mapped (while the if-statement still works with a bogus addr). - Change pmd_page() to pmd_pfn() since an ioremap range is not backed by struct page (while the if-statement still works with a bogus addr). 32-bit: - No change for the sync operation since the index3 PGD entry covers the entire vmalloc range, which is always valid. (A separate change to sync PGD entry is necessary if this memory layout is changed regardless of the page size.) - Add pmd_huge() to the validation code to handle large pages. This is for completeness since vmalloc_fault() won't happen in ioremap'd ranges as its PGD entry is always valid. Reported-by: Henning Schild Signed-off-by: Toshi Kani Acked-by: Borislav Petkov Cc: # 4.1+ Cc: Andrew Morton Cc: Andy Lutomirski Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Luis R. Rodriguez Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Toshi Kani Cc: linux-mm@kvack.org Cc: linux-nvdimm@lists.01.org Link: http://lkml.kernel.org/r/1455758214-24623-1-git-send-email-toshi.kani@hpe.com Signed-off-by: Ingo Molnar --- arch/x86/mm/fault.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index eef44d9a3f77..e830c71a1323 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -287,6 +287,9 @@ static noinline int vmalloc_fault(unsigned long address) if (!pmd_k) return -1; + if (pmd_huge(*pmd_k)) + return 0; + pte_k = pte_offset_kernel(pmd_k, address); if (!pte_present(*pte_k)) return -1; @@ -360,8 +363,6 @@ void vmalloc_sync_all(void) * 64-bit: * * Handle a fault on the vmalloc area - * - * This assumes no large pages in there. */ static noinline int vmalloc_fault(unsigned long address) { @@ -403,17 +404,23 @@ static noinline int vmalloc_fault(unsigned long address) if (pud_none(*pud_ref)) return -1; - if (pud_none(*pud) || pud_page_vaddr(*pud) != pud_page_vaddr(*pud_ref)) + if (pud_none(*pud) || pud_pfn(*pud) != pud_pfn(*pud_ref)) BUG(); + if (pud_huge(*pud)) + return 0; + pmd = pmd_offset(pud, address); pmd_ref = pmd_offset(pud_ref, address); if (pmd_none(*pmd_ref)) return -1; - if (pmd_none(*pmd) || pmd_page(*pmd) != pmd_page(*pmd_ref)) + if (pmd_none(*pmd) || pmd_pfn(*pmd) != pmd_pfn(*pmd_ref)) BUG(); + if (pmd_huge(*pmd)) + return 0; + pte_ref = pte_offset_kernel(pmd_ref, address); if (!pte_present(*pte_ref)) return -1; -- cgit v1.2.3 From 457a98b0809fa6cde7aab8c314a59d99772b445e Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Wed, 17 Feb 2016 13:11:23 -0800 Subject: mm, x86: fix pte_page() crash in gup_pte_range() Commit 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") has moved up the pte_page(pte) in x86's fast gup_pte_range(), for no discernible reason: put it back where it belongs, after the pte_flags check and the pfn_valid cross-check. That may be the cause of the NULL pointer dereference in gup_pte_range(), seen when vfio called vaddr_get_pfn() when starting a qemu-kvm based VM. Signed-off-by: Hugh Dickins Reported-by: Michael Long Tested-by: Michael Long Acked-by: Dan Williams Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/mm/gup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c index 6d5eb5900372..d8a798d8bf50 100644 --- a/arch/x86/mm/gup.c +++ b/arch/x86/mm/gup.c @@ -102,7 +102,6 @@ static noinline int gup_pte_range(pmd_t pmd, unsigned long addr, return 0; } - page = pte_page(pte); if (pte_devmap(pte)) { pgmap = get_dev_pagemap(pte_pfn(pte), pgmap); if (unlikely(!pgmap)) { @@ -115,6 +114,7 @@ static noinline int gup_pte_range(pmd_t pmd, unsigned long addr, return 0; } VM_BUG_ON(!pfn_valid(pte_pfn(pte))); + page = pte_page(pte); get_page(page); put_dev_pagemap(pgmap); SetPageReferenced(page); -- cgit v1.2.3 From 8684fa3e7a9ee629ca60bd811d1597646451f918 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 19 Feb 2016 15:05:50 +0900 Subject: arm64: kbuild: make "make install" not depend on vmlinux For the same reason as commit 19514fc665ff ("arm, kbuild: make "make install" not depend on vmlinux"), the install targets should never trigger the rebuild of the kernel. Signed-off-by: Masahiro Yamada Signed-off-by: Will Deacon --- arch/arm64/Makefile | 2 +- arch/arm64/boot/Makefile | 4 ++-- arch/arm64/boot/install.sh | 14 ++++++++++++++ 3 files changed, 17 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 307237cfe728..b5e3f6d42b88 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -88,7 +88,7 @@ Image: vmlinux Image.%: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ -zinstall install: vmlinux +zinstall install: $(Q)$(MAKE) $(build)=$(boot) $@ %.dtb: scripts diff --git a/arch/arm64/boot/Makefile b/arch/arm64/boot/Makefile index abcbba2f01ba..305c552b5ec1 100644 --- a/arch/arm64/boot/Makefile +++ b/arch/arm64/boot/Makefile @@ -34,10 +34,10 @@ $(obj)/Image.lzma: $(obj)/Image FORCE $(obj)/Image.lzo: $(obj)/Image FORCE $(call if_changed,lzo) -install: $(obj)/Image +install: $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ $(obj)/Image System.map "$(INSTALL_PATH)" -zinstall: $(obj)/Image.gz +zinstall: $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ $(obj)/Image.gz System.map "$(INSTALL_PATH)" diff --git a/arch/arm64/boot/install.sh b/arch/arm64/boot/install.sh index 12ed78aa6f0c..d91e1f022573 100644 --- a/arch/arm64/boot/install.sh +++ b/arch/arm64/boot/install.sh @@ -20,6 +20,20 @@ # $4 - default install path (blank if root directory) # +verify () { + if [ ! -f "$1" ]; then + echo "" 1>&2 + echo " *** Missing file: $1" 1>&2 + echo ' *** You need to run "make" before "make install".' 1>&2 + echo "" 1>&2 + exit 1 + fi +} + +# Make sure the files actually exist +verify "$2" +verify "$3" + # User may have a custom install script if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi -- cgit v1.2.3 From 52d7523d84d534c241ebac5ac89f5c0a6cb51e41 Mon Sep 17 00:00:00 2001 From: EunTaik Lee Date: Tue, 16 Feb 2016 04:44:35 +0000 Subject: arm64: mm: allow the kernel to handle alignment faults on user accesses Although we don't expect to take alignment faults on access to normal memory, misbehaving (i.e. buggy) user code can pass MMIO pointers into system calls, leading to things like get_user accessing device memory. Rather than OOPS the kernel, allow any exception fixups to run and return something like -EFAULT back to userspace. This makes the behaviour more consistent with userspace, even though applications with access to device mappings can easily cause other issues if they try hard enough. Acked-by: Catalin Marinas Signed-off-by: Eun Taik Lee [will: dropped __kprobes annotation and rewrote commit mesage] Signed-off-by: Will Deacon --- arch/arm64/mm/fault.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 92ddac1e8ca2..abe2a9542b3a 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -371,6 +371,13 @@ static int __kprobes do_translation_fault(unsigned long addr, return 0; } +static int do_alignment_fault(unsigned long addr, unsigned int esr, + struct pt_regs *regs) +{ + do_bad_area(addr, esr, regs); + return 0; +} + /* * This abort handler always returns "fault". */ @@ -418,7 +425,7 @@ static struct fault_info { { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk)" }, { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk)" }, { do_bad, SIGBUS, 0, "unknown 32" }, - { do_bad, SIGBUS, BUS_ADRALN, "alignment fault" }, + { do_alignment_fault, SIGBUS, BUS_ADRALN, "alignment fault" }, { do_bad, SIGBUS, 0, "unknown 34" }, { do_bad, SIGBUS, 0, "unknown 35" }, { do_bad, SIGBUS, 0, "unknown 36" }, -- cgit v1.2.3