From f133ecca9cbb31b5e6e9bda27cbe3034fbf656df Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 26 May 2011 12:40:09 -0400 Subject: arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann Signed-off-by: Chris Metcalf --- arch/tile/Kconfig | 1 + arch/tile/include/asm/hardwall.h | 15 +++- arch/tile/kernel/Makefile | 2 +- arch/tile/kernel/hardwall.c | 90 ++++++++++++++----- arch/tile/kernel/proc.c | 73 +++++++++++++++ arch/tile/kernel/sysfs.c | 185 +++++++++++++++++++++++++++++++++++++++ 6 files changed, 338 insertions(+), 28 deletions(-) create mode 100644 arch/tile/kernel/sysfs.c (limited to 'arch') diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 635e1bfb1c5d..3f7d63c7ae85 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -12,6 +12,7 @@ config TILE select GENERIC_IRQ_PROBE select GENERIC_PENDING_IRQ if SMP select GENERIC_IRQ_SHOW + select SYS_HYPERVISOR # FIXME: investigate whether we need/want these options. # select HAVE_IOREMAP_PROT diff --git a/arch/tile/include/asm/hardwall.h b/arch/tile/include/asm/hardwall.h index 0bed3ec7b42c..2ac422848c7d 100644 --- a/arch/tile/include/asm/hardwall.h +++ b/arch/tile/include/asm/hardwall.h @@ -40,6 +40,10 @@ #define HARDWALL_DEACTIVATE \ _IO(HARDWALL_IOCTL_BASE, _HARDWALL_DEACTIVATE) +#define _HARDWALL_GET_ID 4 +#define HARDWALL_GET_ID \ + _IO(HARDWALL_IOCTL_BASE, _HARDWALL_GET_ID) + #ifndef __KERNEL__ /* This is the canonical name expected by userspace. */ @@ -47,9 +51,14 @@ #else -/* Hook for /proc/tile/hardwall. */ -struct seq_file; -int proc_tile_hardwall_show(struct seq_file *sf, void *v); +/* /proc hooks for hardwall. */ +struct proc_dir_entry; +#ifdef CONFIG_HARDWALL +void proc_tile_hardwall_init(struct proc_dir_entry *root); +int proc_pid_hardwall(struct task_struct *task, char *buffer); +#else +static inline void proc_tile_hardwall_init(struct proc_dir_entry *root) {} +#endif #endif diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile index b4c8e8ec45dc..b4dbc057baad 100644 --- a/arch/tile/kernel/Makefile +++ b/arch/tile/kernel/Makefile @@ -5,7 +5,7 @@ extra-y := vmlinux.lds head_$(BITS).o obj-y := backtrace.o entry.o init_task.o irq.o messaging.o \ pci-dma.o proc.o process.o ptrace.o reboot.o \ - setup.o signal.o single_step.o stack.o sys.o time.o traps.o \ + setup.o signal.o single_step.o stack.o sys.o sysfs.o time.o traps.o \ intvec_$(BITS).o regs_$(BITS).o tile-desc_$(BITS).o obj-$(CONFIG_HARDWALL) += hardwall.o diff --git a/arch/tile/kernel/hardwall.c b/arch/tile/kernel/hardwall.c index 3bddef710de4..8c41891aab34 100644 --- a/arch/tile/kernel/hardwall.c +++ b/arch/tile/kernel/hardwall.c @@ -40,16 +40,25 @@ struct hardwall_info { struct list_head list; /* "rectangles" list */ struct list_head task_head; /* head of tasks in this hardwall */ + struct cpumask cpumask; /* cpus in the rectangle */ int ulhc_x; /* upper left hand corner x coord */ int ulhc_y; /* upper left hand corner y coord */ int width; /* rectangle width */ int height; /* rectangle height */ + int id; /* integer id for this hardwall */ int teardown_in_progress; /* are we tearing this one down? */ }; /* Currently allocated hardwall rectangles */ static LIST_HEAD(rectangles); +/* /proc/tile/hardwall */ +static struct proc_dir_entry *hardwall_proc_dir; + +/* Functions to manage files in /proc/tile/hardwall. */ +static void hardwall_add_proc(struct hardwall_info *rect); +static void hardwall_remove_proc(struct hardwall_info *rect); + /* * Guard changes to the hardwall data structures. * This could be finer grained (e.g. one lock for the list of hardwall @@ -105,6 +114,8 @@ static int setup_rectangle(struct hardwall_info *r, struct cpumask *mask) r->ulhc_y = cpu_y(ulhc); r->width = cpu_x(lrhc) - r->ulhc_x + 1; r->height = cpu_y(lrhc) - r->ulhc_y + 1; + cpumask_copy(&r->cpumask, mask); + r->id = ulhc; /* The ulhc cpu id can be the hardwall id. */ /* Width and height must be positive */ if (r->width <= 0 || r->height <= 0) @@ -388,6 +399,9 @@ static struct hardwall_info *hardwall_create( /* Set up appropriate hardwalling on all affected cpus. */ hardwall_setup(rect); + /* Create a /proc/tile/hardwall entry. */ + hardwall_add_proc(rect); + return rect; } @@ -645,6 +659,9 @@ static void hardwall_destroy(struct hardwall_info *rect) /* Restart switch and disable firewall. */ on_each_cpu_mask(&mask, restart_udn_switch, NULL, 1); + /* Remove the /proc/tile/hardwall entry. */ + hardwall_remove_proc(rect); + /* Now free the rectangle from the list. */ spin_lock_irqsave(&hardwall_lock, flags); BUG_ON(!list_empty(&rect->task_head)); @@ -654,35 +671,57 @@ static void hardwall_destroy(struct hardwall_info *rect) } -/* - * Dump hardwall state via /proc; initialized in arch/tile/sys/proc.c. - */ -int proc_tile_hardwall_show(struct seq_file *sf, void *v) +static int hardwall_proc_show(struct seq_file *sf, void *v) { - struct hardwall_info *r; + struct hardwall_info *rect = sf->private; + char buf[256]; - if (udn_disabled) { - seq_printf(sf, "%dx%d 0,0 pids:\n", smp_width, smp_height); - return 0; - } - - spin_lock_irq(&hardwall_lock); - list_for_each_entry(r, &rectangles, list) { - struct task_struct *p; - seq_printf(sf, "%dx%d %d,%d pids:", - r->width, r->height, r->ulhc_x, r->ulhc_y); - list_for_each_entry(p, &r->task_head, thread.hardwall_list) { - unsigned int cpu = cpumask_first(&p->cpus_allowed); - unsigned int x = cpu % smp_width; - unsigned int y = cpu / smp_width; - seq_printf(sf, " %d@%d,%d", p->pid, x, y); - } - seq_printf(sf, "\n"); - } - spin_unlock_irq(&hardwall_lock); + int rc = cpulist_scnprintf(buf, sizeof(buf), &rect->cpumask); + buf[rc++] = '\n'; + seq_write(sf, buf, rc); return 0; } +static int hardwall_proc_open(struct inode *inode, + struct file *file) +{ + return single_open(file, hardwall_proc_show, PDE(inode)->data); +} + +static const struct file_operations hardwall_proc_fops = { + .open = hardwall_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void hardwall_add_proc(struct hardwall_info *rect) +{ + char buf[64]; + snprintf(buf, sizeof(buf), "%d", rect->id); + proc_create_data(buf, 0444, hardwall_proc_dir, + &hardwall_proc_fops, rect); +} + +static void hardwall_remove_proc(struct hardwall_info *rect) +{ + char buf[64]; + snprintf(buf, sizeof(buf), "%d", rect->id); + remove_proc_entry(buf, hardwall_proc_dir); +} + +int proc_pid_hardwall(struct task_struct *task, char *buffer) +{ + struct hardwall_info *rect = task->thread.hardwall; + return rect ? sprintf(buffer, "%d\n", rect->id) : 0; +} + +void proc_tile_hardwall_init(struct proc_dir_entry *root) +{ + if (!udn_disabled) + hardwall_proc_dir = proc_mkdir("hardwall", root); +} + /* * Character device support via ioctl/close. @@ -716,6 +755,9 @@ static long hardwall_ioctl(struct file *file, unsigned int a, unsigned long b) return -EINVAL; return hardwall_deactivate(current); + case _HARDWALL_GET_ID: + return rect ? rect->id : -EINVAL; + default: return -EINVAL; } diff --git a/arch/tile/kernel/proc.c b/arch/tile/kernel/proc.c index 2e02c41ddf3b..62d820833c68 100644 --- a/arch/tile/kernel/proc.c +++ b/arch/tile/kernel/proc.c @@ -27,6 +27,7 @@ #include #include #include +#include #include @@ -88,3 +89,75 @@ const struct seq_operations cpuinfo_op = { .stop = c_stop, .show = show_cpuinfo, }; + +/* + * Support /proc/tile directory + */ + +static int __init proc_tile_init(void) +{ + struct proc_dir_entry *root = proc_mkdir("tile", NULL); + if (root == NULL) + return 0; + + proc_tile_hardwall_init(root); + + return 0; +} + +arch_initcall(proc_tile_init); + +/* + * Support /proc/sys/tile directory + */ + +#ifndef __tilegx__ /* FIXME: GX: no support for unaligned access yet */ +static ctl_table unaligned_subtable[] = { + { + .procname = "enabled", + .data = &unaligned_fixup, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec + }, + { + .procname = "printk", + .data = &unaligned_printk, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec + }, + { + .procname = "count", + .data = &unaligned_fixup_count, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec + }, + {} +}; + +static ctl_table unaligned_table[] = { + { + .procname = "unaligned_fixup", + .mode = 0555, + .child = unaligned_subtable + }, + {} +}; +#endif + +static struct ctl_path tile_path[] = { + { .procname = "tile" }, + { } +}; + +static int __init proc_sys_tile_init(void) +{ +#ifndef __tilegx__ /* FIXME: GX: no support for unaligned access yet */ + register_sysctl_paths(tile_path, unaligned_table); +#endif + return 0; +} + +arch_initcall(proc_sys_tile_init); diff --git a/arch/tile/kernel/sysfs.c b/arch/tile/kernel/sysfs.c new file mode 100644 index 000000000000..b671a86f4515 --- /dev/null +++ b/arch/tile/kernel/sysfs.c @@ -0,0 +1,185 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * /sys entry support. + */ + +#include +#include +#include +#include +#include + +/* Return a string queried from the hypervisor, truncated to page size. */ +static ssize_t get_hv_confstr(char *page, int query) +{ + ssize_t n = hv_confstr(query, (unsigned long)page, PAGE_SIZE - 1); + n = n < 0 ? 0 : min(n, (ssize_t)PAGE_SIZE - 1) - 1; + if (n) + page[n++] = '\n'; + page[n] = '\0'; + return n; +} + +static ssize_t chip_width_show(struct sysdev_class *dev, + struct sysdev_class_attribute *attr, + char *page) +{ + return sprintf(page, "%u\n", smp_width); +} +static SYSDEV_CLASS_ATTR(chip_width, 0444, chip_width_show, NULL); + +static ssize_t chip_height_show(struct sysdev_class *dev, + struct sysdev_class_attribute *attr, + char *page) +{ + return sprintf(page, "%u\n", smp_height); +} +static SYSDEV_CLASS_ATTR(chip_height, 0444, chip_height_show, NULL); + +static ssize_t chip_serial_show(struct sysdev_class *dev, + struct sysdev_class_attribute *attr, + char *page) +{ + return get_hv_confstr(page, HV_CONFSTR_CHIP_SERIAL_NUM); +} +static SYSDEV_CLASS_ATTR(chip_serial, 0444, chip_serial_show, NULL); + +static ssize_t chip_revision_show(struct sysdev_class *dev, + struct sysdev_class_attribute *attr, + char *page) +{ + return get_hv_confstr(page, HV_CONFSTR_CHIP_REV); +} +static SYSDEV_CLASS_ATTR(chip_revision, 0444, chip_revision_show, NULL); + + +static ssize_t type_show(struct sysdev_class *dev, + struct sysdev_class_attribute *attr, + char *page) +{ + return sprintf(page, "tilera\n"); +} +static SYSDEV_CLASS_ATTR(type, 0444, type_show, NULL); + +#define HV_CONF_ATTR(name, conf) \ + static ssize_t name ## _show(struct sysdev_class *dev, \ + struct sysdev_class_attribute *attr, \ + char *page) \ + { \ + return get_hv_confstr(page, conf); \ + } \ + static SYSDEV_CLASS_ATTR(name, 0444, name ## _show, NULL); + +HV_CONF_ATTR(version, HV_CONFSTR_HV_SW_VER) +HV_CONF_ATTR(config_version, HV_CONFSTR_HV_CONFIG_VER) + +HV_CONF_ATTR(board_part, HV_CONFSTR_BOARD_PART_NUM) +HV_CONF_ATTR(board_serial, HV_CONFSTR_BOARD_SERIAL_NUM) +HV_CONF_ATTR(board_revision, HV_CONFSTR_BOARD_REV) +HV_CONF_ATTR(board_description, HV_CONFSTR_BOARD_DESC) +HV_CONF_ATTR(mezz_part, HV_CONFSTR_MEZZ_PART_NUM) +HV_CONF_ATTR(mezz_serial, HV_CONFSTR_MEZZ_SERIAL_NUM) +HV_CONF_ATTR(mezz_revision, HV_CONFSTR_MEZZ_REV) +HV_CONF_ATTR(mezz_description, HV_CONFSTR_MEZZ_DESC) +HV_CONF_ATTR(switch_control, HV_CONFSTR_SWITCH_CONTROL) + +static struct attribute *board_attrs[] = { + &attr_board_part.attr, + &attr_board_serial.attr, + &attr_board_revision.attr, + &attr_board_description.attr, + &attr_mezz_part.attr, + &attr_mezz_serial.attr, + &attr_mezz_revision.attr, + &attr_mezz_description.attr, + &attr_switch_control.attr, + NULL +}; + +static struct attribute_group board_attr_group = { + .name = "board", + .attrs = board_attrs, +}; + + +static struct bin_attribute hvconfig_bin; + +static ssize_t +hvconfig_bin_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + static size_t size; + + /* Lazily learn the true size (minus the trailing NUL). */ + if (size == 0) + size = hv_confstr(HV_CONFSTR_HV_CONFIG, 0, 0) - 1; + + /* Check and adjust input parameters. */ + if (off > size) + return -EINVAL; + if (count > size - off) + count = size - off; + + if (count) { + /* Get a copy of the hvc and copy out the relevant portion. */ + char *hvc; + + size = off + count; + hvc = kmalloc(size, GFP_KERNEL); + if (hvc == NULL) + return -ENOMEM; + hv_confstr(HV_CONFSTR_HV_CONFIG, (unsigned long)hvc, size); + memcpy(buf, hvc + off, count); + kfree(hvc); + } + + return count; +} + +static int __init create_sysfs_entries(void) +{ + struct sysdev_class *cls = &cpu_sysdev_class; + int err = 0; + +#define create_cpu_attr(name) \ + if (!err) \ + err = sysfs_create_file(&cls->kset.kobj, &attr_##name.attr); + create_cpu_attr(chip_width); + create_cpu_attr(chip_height); + create_cpu_attr(chip_serial); + create_cpu_attr(chip_revision); + +#define create_hv_attr(name) \ + if (!err) \ + err = sysfs_create_file(hypervisor_kobj, &attr_##name.attr); + create_hv_attr(type); + create_hv_attr(version); + create_hv_attr(config_version); + + if (!err) + err = sysfs_create_group(hypervisor_kobj, &board_attr_group); + + if (!err) { + sysfs_bin_attr_init(&hvconfig_bin); + hvconfig_bin.attr.name = "hvconfig"; + hvconfig_bin.attr.mode = S_IRUGO; + hvconfig_bin.read = hvconfig_bin_read; + hvconfig_bin.size = PAGE_SIZE; + err = sysfs_create_bin_file(hypervisor_kobj, &hvconfig_bin); + } + + return err; +} +subsys_initcall(create_sysfs_entries); -- cgit v1.2.3