From 36beb82390235236c60eb97ca526b1cad97e2df3 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 5 Nov 2007 15:04:40 +0000 Subject: pata_serverworks: Fix problem with some drive combinations The driver used the channel not the device number for deciding where to load some timing parameters. Also change so that we clear the UDMA field as the old driver did. Not believed neccessary but does no harm. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_serverworks.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers/ata/pata_serverworks.c') diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index df68806df4be..8bed88873720 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -274,28 +274,27 @@ static void serverworks_set_dmamode(struct ata_port *ap, struct ata_device *adev { static const u8 dma_mode[] = { 0x77, 0x21, 0x20 }; int offset = 1 + 2 * ap->port_no - adev->devno; - int devbits = (2 * ap->port_no + adev->devno); + int devbits = 2 * ap->port_no + adev->devno; u8 ultra; u8 ultra_cfg; struct pci_dev *pdev = to_pci_dev(ap->host->dev); pci_read_config_byte(pdev, 0x54, &ultra_cfg); + pci_read_config_byte(pdev, 0x56 + ap->port_no, &ultra); + ultra &= ~(0x0F << (adev->devno * 4)); if (adev->dma_mode >= XFER_UDMA_0) { pci_write_config_byte(pdev, 0x44 + offset, 0x20); - pci_read_config_byte(pdev, 0x56 + ap->port_no, &ultra); - ultra &= ~(0x0F << (ap->port_no * 4)); ultra |= (adev->dma_mode - XFER_UDMA_0) - << (ap->port_no * 4); - pci_write_config_byte(pdev, 0x56 + ap->port_no, ultra); - + << (adev->devno * 4); ultra_cfg |= (1 << devbits); } else { pci_write_config_byte(pdev, 0x44 + offset, dma_mode[adev->dma_mode - XFER_MW_DMA_0]); ultra_cfg &= ~(1 << devbits); } + pci_write_config_byte(pdev, 0x56 + ap->port_no, ultra); pci_write_config_byte(pdev, 0x54, ultra_cfg); } -- cgit v1.2.3