From fc0012ec533def054e1ac57d54ed781fc0ab6b71 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Thu, 12 Sep 2013 23:01:29 +0200 Subject: pata_isapnp: Don't use invalid I/O ports The test for 2nd I/O port validity is broken (reversed): On devices with no control port, the driver attempts to use invalid port 0, resulting in logs full of bad_io_access errors. On devices with control port, the driver does not use it. Signed-off-by: Ondrej Zary Signed-off-by: Tejun Heo --- drivers/ata/pata_isapnp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 4bceb8803a10..b33d1f99b3a4 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -78,7 +78,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev ap->ioaddr.cmd_addr = cmd_addr; - if (pnp_port_valid(idev, 1) == 0) { + if (pnp_port_valid(idev, 1)) { ctl_addr = devm_ioport_map(&idev->dev, pnp_port_start(idev, 1), 1); ap->ioaddr.altstatus_addr = ctl_addr; -- cgit v1.2.3 From d2782d96f3d85e85742364b85db63763918a4e1c Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Sat, 5 Oct 2013 09:15:16 +0900 Subject: ahci: use dev_info() instead of printk() Change "raw" printk() call to dev_info() to provide a better message to userspace so it can properly identify the device and not just have to guess. Signed-off-by: Jingoo Han Signed-off-by: Tejun Heo --- drivers/ata/ahci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 9d715ae5ff6b..8e28f923cf7f 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1343,7 +1343,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) host->flags |= ATA_HOST_PARALLEL_SCAN; else - printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n"); + dev_info(&pdev->dev, "SSS flag set, parallel bus scan disabled\n"); if (pi.flags & ATA_FLAG_EM) ahci_reset_em(host); -- cgit v1.2.3 From 0fed4c09dca6820adaee28e55cd4283e74d029cd Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Sat, 5 Oct 2013 09:15:59 +0900 Subject: ahci_platform: use dev_info() instead of printk() Change "raw" printk() call to dev_info() to provide a better message to userspace so it can properly identify the device and not just have to guess. Signed-off-by: Jingoo Han Signed-off-by: Tejun Heo --- drivers/ata/ahci_platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 2daaee05cab1..7d3b85385bfc 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -184,7 +184,7 @@ static int ahci_probe(struct platform_device *pdev) if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) host->flags |= ATA_HOST_PARALLEL_SCAN; else - printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n"); + dev_info(dev, "SSS flag set, parallel bus scan disabled\n"); if (pi.flags & ATA_FLAG_EM) ahci_reset_em(host); -- cgit v1.2.3 From f13e220161e738c2710b9904dcb3cf8bb0bcce61 Mon Sep 17 00:00:00 2001 From: Gwendal Grignou Date: Fri, 7 Aug 2009 16:17:49 -0700 Subject: libata: make ata_eh_qc_retry() bump scmd->allowed on bogus failures libata EH decrements scmd->retries when the command failed for reasons unrelated to the command itself so that, for example, commands aborted due to suspend / resume cycle don't get penalized; however, decrementing scmd->retries isn't enough for ATA passthrough commands. Without this fix, ATA passthrough commands are not resend to the drive, and no error is signalled to the caller because: - allowed retry count is 1 - ata_eh_qc_complete fill the sense data, so result is valid - sense data is filled with untouched ATA registers. Signed-off-by: Gwendal Grignou Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/libata-eh.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index c69fcce505c0..370462fa8e01 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1322,14 +1322,14 @@ void ata_eh_qc_complete(struct ata_queued_cmd *qc) * should be retried. To be used from EH. * * SCSI midlayer limits the number of retries to scmd->allowed. - * scmd->retries is decremented for commands which get retried + * scmd->allowed is incremented for commands which get retried * due to unrelated failures (qc->err_mask is zero). */ void ata_eh_qc_retry(struct ata_queued_cmd *qc) { struct scsi_cmnd *scmd = qc->scsicmd; - if (!qc->err_mask && scmd->retries) - scmd->retries--; + if (!qc->err_mask) + scmd->allowed++; __ata_eh_qc_complete(qc); } -- cgit v1.2.3 From fa070ee6dc70bcc19737a2406d741b089b3149d5 Mon Sep 17 00:00:00 2001 From: Lukasz Dorau Date: Mon, 14 Oct 2013 18:18:53 +0200 Subject: libahci: fix turning on LEDs in ahci_start_port() If EM Transmit bit is busy during init ata_msleep() is called. It is wrong - msleep() should be used instead of ata_msleep(), because if EM Transmit bit is busy for one port, it will be busy for all other ports too, so using ata_msleep() causes wasting tries for another ports. The most common scenario looks like that now (six ports try to transmit a LED meaasege): - port #0 tries for the 1st time and succeeds - ports #1-5 try for the 1st time and sleeps - port #1 tries for the 2nd time and succeeds - ports #2-5 try for the 2nd time and sleeps - port #2 tries for the 3rd time and succeeds - ports #3-5 try for the 3rd time and sleeps - port #3 tries for the 4th time and succeeds - ports #4-5 try for the 4th time and sleeps - port #4 tries for the 5th time and succeeds - port #5 tries for the 5th time and sleeps At this moment port #5 wasted all its five tries and failed to initialize. Because there are only 5 (EM_MAX_RETRY) tries available usually only five ports succeed to initialize. The sixth port and next ones usually will fail. If msleep() is used instead of ata_msleep() the first port succeeds to initialize in the first try and next ones usually succeed to initialize in the second try. tj: updated comment Signed-off-by: Lukasz Dorau Signed-off-by: Tejun Heo --- drivers/ata/libahci.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index acfd0f711069..aaac4fb0d564 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -778,8 +778,16 @@ static void ahci_start_port(struct ata_port *ap) rc = ap->ops->transmit_led_message(ap, emp->led_state, 4); + /* + * If busy, give a breather but do not + * release EH ownership by using msleep() + * instead of ata_msleep(). EM Transmit + * bit is busy for the whole host and + * releasing ownership will cause other + * ports to fail the same way. + */ if (rc == -EBUSY) - ata_msleep(ap, 1); + msleep(1); else break; } -- cgit v1.2.3