From 1b55c16a5e4718f58ed58cfdfe37fe4cd4d89f88 Mon Sep 17 00:00:00 2001 From: Bhaumik Bhatt Date: Mon, 9 Nov 2020 12:47:20 -0800 Subject: bus: mhi: core: Use appropriate names for firmware load functions mhi_fw_load_sbl() function is currently used to transfer SBL or EDL images over BHI (Boot Host Interface). Same goes with mhi_fw_load_amss() which uses BHIe. However, the contents of these functions do not indicate support for a specific set of images. Since these can be used for any image download over BHI or BHIe, rename them based on the protocol used. Signed-off-by: Bhaumik Bhatt Reviewed-by: Manivannan Sadhasivam Signed-off-by: Manivannan Sadhasivam --- drivers/bus/mhi/core/boot.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers/bus') diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c index 6f0cfb9922b4..2d7752cd9ccc 100644 --- a/drivers/bus/mhi/core/boot.c +++ b/drivers/bus/mhi/core/boot.c @@ -176,7 +176,7 @@ int mhi_download_rddm_image(struct mhi_controller *mhi_cntrl, bool in_panic) } EXPORT_SYMBOL_GPL(mhi_download_rddm_image); -static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl, +static int mhi_fw_load_bhie(struct mhi_controller *mhi_cntrl, const struct mhi_buf *mhi_buf) { void __iomem *base = mhi_cntrl->bhie; @@ -192,7 +192,7 @@ static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl, } sequence_id = MHI_RANDOM_U32_NONZERO(BHIE_TXVECSTATUS_SEQNUM_BMSK); - dev_dbg(dev, "Starting AMSS download via BHIe. Sequence ID:%u\n", + dev_dbg(dev, "Starting image download via BHIe. Sequence ID: %u\n", sequence_id); mhi_write_reg(mhi_cntrl, base, BHIE_TXVECADDR_HIGH_OFFS, upper_32_bits(mhi_buf->dma_addr)); @@ -223,7 +223,7 @@ static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl, return (!ret) ? -ETIMEDOUT : 0; } -static int mhi_fw_load_sbl(struct mhi_controller *mhi_cntrl, +static int mhi_fw_load_bhi(struct mhi_controller *mhi_cntrl, dma_addr_t dma_addr, size_t size) { @@ -250,7 +250,7 @@ static int mhi_fw_load_sbl(struct mhi_controller *mhi_cntrl, } session_id = MHI_RANDOM_U32_NONZERO(BHI_TXDB_SEQNUM_BMSK); - dev_dbg(dev, "Starting SBL download via BHI. Session ID:%u\n", + dev_dbg(dev, "Starting image download via BHI. Session ID: %u\n", session_id); mhi_write_reg(mhi_cntrl, base, BHI_STATUS, 0); mhi_write_reg(mhi_cntrl, base, BHI_IMGADDR_HIGH, @@ -449,9 +449,9 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl) return; } - /* Download SBL image */ + /* Download image using BHI */ memcpy(buf, firmware->data, size); - ret = mhi_fw_load_sbl(mhi_cntrl, dma_addr, size); + ret = mhi_fw_load_bhi(mhi_cntrl, dma_addr, size); mhi_free_coherent(mhi_cntrl, size, buf, dma_addr); if (!mhi_cntrl->fbc_download || ret || mhi_cntrl->ee == MHI_EE_EDL) @@ -459,7 +459,7 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl) /* Error or in EDL mode, we're done */ if (ret) { - dev_err(dev, "MHI did not load SBL, ret:%d\n", ret); + dev_err(dev, "MHI did not load image over BHI, ret: %d\n", ret); return; } @@ -509,11 +509,12 @@ fw_load_ee_pthru: /* Start full firmware image download */ image_info = mhi_cntrl->fbc_image; - ret = mhi_fw_load_amss(mhi_cntrl, + ret = mhi_fw_load_bhie(mhi_cntrl, /* Vector table is the last entry */ &image_info->mhi_buf[image_info->entries - 1]); if (ret) - dev_err(dev, "MHI did not load AMSS, ret:%d\n", ret); + dev_err(dev, "MHI did not load image over BHIe, ret: %d\n", + ret); release_firmware(firmware); -- cgit v1.2.3