From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/char/rio/rioboard.h | 281 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 281 insertions(+) create mode 100644 drivers/char/rio/rioboard.h (limited to 'drivers/char/rio/rioboard.h') diff --git a/drivers/char/rio/rioboard.h b/drivers/char/rio/rioboard.h new file mode 100644 index 000000000000..cc6ac6a98f65 --- /dev/null +++ b/drivers/char/rio/rioboard.h @@ -0,0 +1,281 @@ +/************************************************************************/ +/* */ +/* Title : RIO Host Card Hardware Definitions */ +/* */ +/* Author : N.P.Vassallo */ +/* */ +/* Creation : 26th April 1999 */ +/* */ +/* Version : 1.0.0 */ +/* */ +/* Copyright : (c) Specialix International Ltd. 1999 * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * */ +/* Description : Prototypes, structures and definitions */ +/* describing the RIO board hardware */ +/* */ +/************************************************************************/ + +/* History... + +1.0.0 26/04/99 NPV Creation. + +*/ + +#ifndef _rioboard_h /* If RIOBOARD.H not already defined */ +#define _rioboard_h 1 + +/***************************************************************************** +*********************** *********************** +*********************** Hardware Control Registers *********************** +*********************** *********************** +*****************************************************************************/ + +/* Hardware Registers... */ + +#define RIO_REG_BASE 0x7C00 /* Base of control registers */ + +#define RIO_CONFIG RIO_REG_BASE + 0x0000 /* WRITE: Configuration Register */ +#define RIO_INTSET RIO_REG_BASE + 0x0080 /* WRITE: Interrupt Set */ +#define RIO_RESET RIO_REG_BASE + 0x0100 /* WRITE: Host Reset */ +#define RIO_INTRESET RIO_REG_BASE + 0x0180 /* WRITE: Interrupt Reset */ + +#define RIO_VPD_ROM RIO_REG_BASE + 0x0000 /* READ: Vital Product Data ROM */ +#define RIO_INTSTAT RIO_REG_BASE + 0x0080 /* READ: Interrupt Status (Jet boards only) */ +#define RIO_RESETSTAT RIO_REG_BASE + 0x0100 /* READ: Reset Status (Jet boards only) */ + +/* RIO_VPD_ROM definitions... */ +#define VPD_SLX_ID1 0x00 /* READ: Specialix Identifier #1 */ +#define VPD_SLX_ID2 0x01 /* READ: Specialix Identifier #2 */ +#define VPD_HW_REV 0x02 /* READ: Hardware Revision */ +#define VPD_HW_ASSEM 0x03 /* READ: Hardware Assembly Level */ +#define VPD_UNIQUEID4 0x04 /* READ: Unique Identifier #4 */ +#define VPD_UNIQUEID3 0x05 /* READ: Unique Identifier #3 */ +#define VPD_UNIQUEID2 0x06 /* READ: Unique Identifier #2 */ +#define VPD_UNIQUEID1 0x07 /* READ: Unique Identifier #1 */ +#define VPD_MANU_YEAR 0x08 /* READ: Year Of Manufacture (0 = 1970) */ +#define VPD_MANU_WEEK 0x09 /* READ: Week Of Manufacture (0 = week 1 Jan) */ +#define VPD_HWFEATURE1 0x0A /* READ: Hardware Feature Byte 1 */ +#define VPD_HWFEATURE2 0x0B /* READ: Hardware Feature Byte 2 */ +#define VPD_HWFEATURE3 0x0C /* READ: Hardware Feature Byte 3 */ +#define VPD_HWFEATURE4 0x0D /* READ: Hardware Feature Byte 4 */ +#define VPD_HWFEATURE5 0x0E /* READ: Hardware Feature Byte 5 */ +#define VPD_OEMID 0x0F /* READ: OEM Identifier */ +#define VPD_IDENT 0x10 /* READ: Identifier string (16 bytes) */ +#define VPD_IDENT_LEN 0x10 + +/* VPD ROM Definitions... */ +#define SLX_ID1 0x4D +#define SLX_ID2 0x98 + +#define PRODUCT_ID(a) ((a>>4)&0xF) /* Use to obtain Product ID from VPD_UNIQUEID1 */ + +#define ID_SX_ISA 0x2 +#define ID_RIO_EISA 0x3 +#define ID_SX_PCI 0x5 +#define ID_SX_EISA 0x7 +#define ID_RIO_RTA16 0x9 +#define ID_RIO_ISA 0xA +#define ID_RIO_MCA 0xB +#define ID_RIO_SBUS 0xC +#define ID_RIO_PCI 0xD +#define ID_RIO_RTA8 0xE + +/* Transputer bootstrap definitions... */ + +#define BOOTLOADADDR (0x8000 - 6) +#define BOOTINDICATE (0x8000 - 2) + +/* Firmware load position... */ + +#define FIRMWARELOADADDR 0x7C00 /* Firmware is loaded _before_ this address */ + +/***************************************************************************** +***************************** ***************************** +***************************** RIO (Rev1) ISA ***************************** +***************************** ***************************** +*****************************************************************************/ + +/* Control Register Definitions... */ +#define RIO_ISA_IDENT "JBJGPGGHINSMJPJR" + +#define RIO_ISA_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ +#define RIO_ISA_CFG_BUSENABLE 0x02 /* Enable processor bus */ +#define RIO_ISA_CFG_IRQMASK 0x30 /* Interrupt mask */ +#define RIO_ISA_CFG_IRQ12 0x10 /* Interrupt Level 12 */ +#define RIO_ISA_CFG_IRQ11 0x20 /* Interrupt Level 11 */ +#define RIO_ISA_CFG_IRQ9 0x30 /* Interrupt Level 9 */ +#define RIO_ISA_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ +#define RIO_ISA_CFG_WAITSTATE0 0x80 /* 0 waitstates, else 1 */ + +/***************************************************************************** +***************************** ***************************** +***************************** RIO (Rev2) ISA ***************************** +***************************** ***************************** +*****************************************************************************/ + +/* Control Register Definitions... */ +#define RIO_ISA2_IDENT "JBJGPGGHINSMJPJR" + +#define RIO_ISA2_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ +#define RIO_ISA2_CFG_BUSENABLE 0x02 /* Enable processor bus */ +#define RIO_ISA2_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ +#define RIO_ISA2_CFG_16BIT 0x08 /* 16bit mode, else 8bit */ +#define RIO_ISA2_CFG_IRQMASK 0x30 /* Interrupt mask */ +#define RIO_ISA2_CFG_IRQ15 0x00 /* Interrupt Level 15 */ +#define RIO_ISA2_CFG_IRQ12 0x10 /* Interrupt Level 12 */ +#define RIO_ISA2_CFG_IRQ11 0x20 /* Interrupt Level 11 */ +#define RIO_ISA2_CFG_IRQ9 0x30 /* Interrupt Level 9 */ +#define RIO_ISA2_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ +#define RIO_ISA2_CFG_WAITSTATE0 0x80 /* 0 waitstates, else 1 */ + +/***************************************************************************** +***************************** ****************************** +***************************** RIO (Jet) ISA ****************************** +***************************** ****************************** +*****************************************************************************/ + +/* Control Register Definitions... */ +#define RIO_ISA3_IDENT "JET HOST BY KEV#" + +#define RIO_ISA3_CFG_BUSENABLE 0x02 /* Enable processor bus */ +#define RIO_ISA3_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ +#define RIO_ISA32_CFG_IRQMASK 0xF30 /* Interrupt mask */ +#define RIO_ISA3_CFG_IRQ15 0xF0 /* Interrupt Level 15 */ +#define RIO_ISA3_CFG_IRQ12 0xC0 /* Interrupt Level 12 */ +#define RIO_ISA3_CFG_IRQ11 0xB0 /* Interrupt Level 11 */ +#define RIO_ISA3_CFG_IRQ10 0xA0 /* Interrupt Level 10 */ +#define RIO_ISA3_CFG_IRQ9 0x90 /* Interrupt Level 9 */ + +/***************************************************************************** +********************************* ******************************** +********************************* RIO MCA ******************************** +********************************* ******************************** +*****************************************************************************/ + +/* Control Register Definitions... */ +#define RIO_MCA_IDENT "JBJGPGGHINSMJPJR" + +#define RIO_MCA_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ +#define RIO_MCA_CFG_BUSENABLE 0x02 /* Enable processor bus */ +#define RIO_MCA_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ + +/***************************************************************************** +******************************** ******************************** +******************************** RIO EISA ******************************** +******************************** ******************************** +*****************************************************************************/ + +/* EISA Configuration Space Definitions... */ +#define EISA_PRODUCT_ID1 0xC80 +#define EISA_PRODUCT_ID2 0xC81 +#define EISA_PRODUCT_NUMBER 0xC82 +#define EISA_REVISION_NUMBER 0xC83 +#define EISA_CARD_ENABLE 0xC84 +#define EISA_VPD_UNIQUEID4 0xC88 /* READ: Unique Identifier #4 */ +#define EISA_VPD_UNIQUEID3 0xC8A /* READ: Unique Identifier #3 */ +#define EISA_VPD_UNIQUEID2 0xC90 /* READ: Unique Identifier #2 */ +#define EISA_VPD_UNIQUEID1 0xC92 /* READ: Unique Identifier #1 */ +#define EISA_VPD_MANU_YEAR 0xC98 /* READ: Year Of Manufacture (0 = 1970) */ +#define EISA_VPD_MANU_WEEK 0xC9A /* READ: Week Of Manufacture (0 = week 1 Jan) */ +#define EISA_MEM_ADDR_23_16 0xC00 +#define EISA_MEM_ADDR_31_24 0xC01 +#define EISA_RIO_CONFIG 0xC02 /* WRITE: Configuration Register */ +#define EISA_RIO_INTSET 0xC03 /* WRITE: Interrupt Set */ +#define EISA_RIO_INTRESET 0xC03 /* READ: Interrupt Reset */ + +/* Control Register Definitions... */ +#define RIO_EISA_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ +#define RIO_EISA_CFG_LINK20 0x02 /* 20Mbps link, else 10Mbps */ +#define RIO_EISA_CFG_BUSENABLE 0x04 /* Enable processor bus */ +#define RIO_EISA_CFG_PROCRUN 0x08 /* Processor running, else reset */ +#define RIO_EISA_CFG_IRQMASK 0xF0 /* Interrupt mask */ +#define RIO_EISA_CFG_IRQ15 0xF0 /* Interrupt Level 15 */ +#define RIO_EISA_CFG_IRQ14 0xE0 /* Interrupt Level 14 */ +#define RIO_EISA_CFG_IRQ12 0xC0 /* Interrupt Level 12 */ +#define RIO_EISA_CFG_IRQ11 0xB0 /* Interrupt Level 11 */ +#define RIO_EISA_CFG_IRQ10 0xA0 /* Interrupt Level 10 */ +#define RIO_EISA_CFG_IRQ9 0x90 /* Interrupt Level 9 */ +#define RIO_EISA_CFG_IRQ7 0x70 /* Interrupt Level 7 */ +#define RIO_EISA_CFG_IRQ6 0x60 /* Interrupt Level 6 */ +#define RIO_EISA_CFG_IRQ5 0x50 /* Interrupt Level 5 */ +#define RIO_EISA_CFG_IRQ4 0x40 /* Interrupt Level 4 */ +#define RIO_EISA_CFG_IRQ3 0x30 /* Interrupt Level 3 */ + +/***************************************************************************** +******************************** ******************************** +******************************** RIO SBus ******************************** +******************************** ******************************** +*****************************************************************************/ + +/* Control Register Definitions... */ +#define RIO_SBUS_IDENT "JBPGK#\0\0\0\0\0\0\0\0\0\0" + +#define RIO_SBUS_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ +#define RIO_SBUS_CFG_BUSENABLE 0x02 /* Enable processor bus */ +#define RIO_SBUS_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ +#define RIO_SBUS_CFG_IRQMASK 0x38 /* Interrupt mask */ +#define RIO_SBUS_CFG_IRQNONE 0x00 /* No Interrupt */ +#define RIO_SBUS_CFG_IRQ7 0x38 /* Interrupt Level 7 */ +#define RIO_SBUS_CFG_IRQ6 0x30 /* Interrupt Level 6 */ +#define RIO_SBUS_CFG_IRQ5 0x28 /* Interrupt Level 5 */ +#define RIO_SBUS_CFG_IRQ4 0x20 /* Interrupt Level 4 */ +#define RIO_SBUS_CFG_IRQ3 0x18 /* Interrupt Level 3 */ +#define RIO_SBUS_CFG_IRQ2 0x10 /* Interrupt Level 2 */ +#define RIO_SBUS_CFG_IRQ1 0x08 /* Interrupt Level 1 */ +#define RIO_SBUS_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ +#define RIO_SBUS_CFG_PROC25 0x80 /* 25Mhz processor clock, else 20Mhz */ + +/***************************************************************************** +********************************* ******************************** +********************************* RIO PCI ******************************** +********************************* ******************************** +*****************************************************************************/ + +/* Control Register Definitions... */ +#define RIO_PCI_IDENT "ECDDPGJGJHJRGSK#" + +#define RIO_PCI_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ +#define RIO_PCI_CFG_BUSENABLE 0x02 /* Enable processor bus */ +#define RIO_PCI_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ +#define RIO_PCI_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ +#define RIO_PCI_CFG_PROC25 0x80 /* 25Mhz processor clock, else 20Mhz */ + +/* PCI Definitions... */ +#define SPX_VENDOR_ID 0x11CB /* Assigned by the PCI SIG */ +#define SPX_DEVICE_ID 0x8000 /* RIO bridge boards */ +#define SPX_PLXDEVICE_ID 0x2000 /* PLX bridge boards */ +#define SPX_SUB_VENDOR_ID SPX_VENDOR_ID /* Same as vendor id */ +#define RIO_SUB_SYS_ID 0x0800 /* RIO PCI board */ + +/***************************************************************************** +***************************** ****************************** +***************************** RIO (Jet) PCI ****************************** +***************************** ****************************** +*****************************************************************************/ + +/* Control Register Definitions... */ +#define RIO_PCI2_IDENT "JET HOST BY KEV#" + +#define RIO_PCI2_CFG_BUSENABLE 0x02 /* Enable processor bus */ +#define RIO_PCI2_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ + +/* PCI Definitions... */ +#define RIO2_SUB_SYS_ID 0x0100 /* RIO (Jet) PCI board */ + +#endif /*_rioboard_h */ + +/* End of RIOBOARD.H */ -- cgit v1.2.3