From b7d950b9281f1dc5a5e37eaaf04cf33067e575f6 Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Wed, 27 May 2020 01:20:55 +0300 Subject: clk: Add Baikal-T1 CCU PLLs driver Baikal-T1 is supposed to be supplied with a high-frequency external oscillator. But in order to create signals suitable for each IP-block embedded into the SoC the oscillator output is primarily connected to a set of CCU PLLs. There are five of them to create clocks for the MIPS P5600 cores, an embedded DDR controller, SATA, Ethernet and PCIe domains. The last three domains though named by the biggest system interfaces in fact include nearly all of the rest SoC peripherals. Each of the PLLs is based on True Circuits TSMC CLN28HPM IP-core with an interface wrapper (so called safe PLL' clocks switcher) to simplify the PLL configuration procedure. This driver creates the of-based hardware clocks to use them then in the corresponding subsystems. In order to simplify the driver code we split the functionality up into the PLLs clocks operations and hardware clocks declaration/registration procedures. Even though the PLLs are based on the same IP-core, they may have some differences. In particular, some CCU PLLs support the output clock change without gating them (like CPU or PCIe PLLs), while the others don't, some CCU PLLs are critical and aren't supposed to be gated. In order to cover all of these cases the hardware clocks driver is designed with an info-descriptor pattern. So there are special static descriptors declared for each PLL, which is then used to create a hardware clock with proper operations. Additionally debugfs-files are provided for each PLL' field to make sure the implemented rate-PLLs-dividers calculation algorithm is correct. Signed-off-by: Serge Semin Cc: Alexey Malahov Cc: Arnd Bergmann Cc: Rob Herring Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200526222056.18072-4-Sergey.Semin@baikalelectronics.ru [sboyd@kernel.org: Silence sparse warning about initializing structs with NULL vs. integer] Signed-off-by: Stephen Boyd --- drivers/clk/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/clk/Kconfig') diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index bcb257baed06..b32da34ebcf9 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -341,6 +341,7 @@ config COMMON_CLK_FIXED_MMIO source "drivers/clk/actions/Kconfig" source "drivers/clk/analogbits/Kconfig" +source "drivers/clk/baikal-t1/Kconfig" source "drivers/clk/bcm/Kconfig" source "drivers/clk/hisilicon/Kconfig" source "drivers/clk/imgtec/Kconfig" -- cgit v1.2.3