From c2147585cce028e46a0ea8b24be3a11716ee6e4f Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Wed, 29 May 2019 11:52:08 +0000 Subject: cpufreq: imx-cpufreq-dt: Fix no OPPs available on unfused parts Early samples without fuses written report "0 0" which means consumer segment and minimum speed grading. According to datasheet the minimum speed grade is not supported for consumer parts so all OPPs are disabled which results in stack dumps later on. Fix by clamping minimum consumer speed grade to 1 on imx8mm and imx8mq. Fixes: 4d28ba1d62c4 ("cpufreq: Add imx-cpufreq-dt driver") Signed-off-by: Leonard Crestez [ Viresh: s/minumum/minimum/ in patch and log ] Signed-off-by: Viresh Kumar --- drivers/cpufreq/imx-cpufreq-dt.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers/cpufreq') diff --git a/drivers/cpufreq/imx-cpufreq-dt.c b/drivers/cpufreq/imx-cpufreq-dt.c index e1aa346efa10..35b6717d7255 100644 --- a/drivers/cpufreq/imx-cpufreq-dt.c +++ b/drivers/cpufreq/imx-cpufreq-dt.c @@ -50,6 +50,21 @@ static int imx_cpufreq_dt_probe(struct platform_device *pdev) speed_grade = (cell_value & OCOTP_CFG3_SPEED_GRADE_MASK) >> OCOTP_CFG3_SPEED_GRADE_SHIFT; mkt_segment = (cell_value & OCOTP_CFG3_MKT_SEGMENT_MASK) >> OCOTP_CFG3_MKT_SEGMENT_SHIFT; + + /* + * Early samples without fuses written report "0 0" which means + * consumer segment and minimum speed grading. + * + * According to datasheet minimum speed grading is not supported for + * consumer parts so clamp to 1 to avoid warning for "no OPPs" + * + * Applies to 8mq and 8mm. + */ + if (mkt_segment == 0 && speed_grade == 0 && ( + !strcmp(match->compatible, "fsl,imx8mm") || + !strcmp(match->compatible, "fsl,imx8mq"))) + speed_grade = 1; + supported_hw[0] = BIT(speed_grade); supported_hw[1] = BIT(mkt_segment); dev_info(&pdev->dev, "cpu speed grade %d mkt segment %d supported-hw %#x %#x\n", -- cgit v1.2.3