From e4f6dfa9ef756a3934a4caf618b1e86e9e8e21d0 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 3 Nov 2022 17:30:54 -0700 Subject: cxl/region: Fix 'distance' calculation with passthrough ports When programming port decode targets, the algorithm wants to ensure that two devices are compatible to be programmed as peers beneath a given port. A compatible peer is a target that shares the same dport, and where that target's interleave position also routes it to the same dport. Compatibility is determined by the device's interleave position being >= to distance. For example, if a given dport can only map every Nth position then positions less than N away from the last target programmed are incompatible. The @distance for the host-bridge's cxl_port in a simple dual-ported host-bridge configuration with 2 direct-attached devices is 1, i.e. An x2 region divided by 2 dports to reach 2 region targets. An x4 region under an x2 host-bridge would need 2 intervening switches where the @distance at the host bridge level is 2 (x4 region divided by 2 switches to reach 4 devices). However, the distance between peers underneath a single ported host-bridge is always zero because there is no limit to the number of devices that can be mapped. In other words, there are no decoders to program in a passthrough, all descendants are mapped and distance only starts matters for the intervening descendant ports of the passthrough port. Add tracking for the number of dports mapped to a port, and use that to detect the passthrough case for calculating @distance. Cc: Reported-by: Bobo WL Reported-by: Jonathan Cameron Link: http://lore.kernel.org/r/20221010172057.00001559@huawei.com Fixes: 27b3f8d13830 ("cxl/region: Program target lists") Reviewed-by: Vishal Verma Link: https://lore.kernel.org/r/166752185440.947915.6617495912508299445.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams --- drivers/cxl/core/port.c | 11 +++++++++-- drivers/cxl/core/region.c | 9 ++++++++- 2 files changed, 17 insertions(+), 3 deletions(-) (limited to 'drivers/cxl/core') diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c index bffde862de0b..e7556864ea80 100644 --- a/drivers/cxl/core/port.c +++ b/drivers/cxl/core/port.c @@ -811,6 +811,7 @@ static struct cxl_dport *find_dport(struct cxl_port *port, int id) static int add_dport(struct cxl_port *port, struct cxl_dport *new) { struct cxl_dport *dup; + int rc; device_lock_assert(&port->dev); dup = find_dport(port, new->port_id); @@ -821,8 +822,14 @@ static int add_dport(struct cxl_port *port, struct cxl_dport *new) dev_name(dup->dport)); return -EBUSY; } - return xa_insert(&port->dports, (unsigned long)new->dport, new, - GFP_KERNEL); + + rc = xa_insert(&port->dports, (unsigned long)new->dport, new, + GFP_KERNEL); + if (rc) + return rc; + + port->nr_dports++; + return 0; } /* diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c index c52465e09f26..c0253de74945 100644 --- a/drivers/cxl/core/region.c +++ b/drivers/cxl/core/region.c @@ -990,7 +990,14 @@ static int cxl_port_setup_targets(struct cxl_port *port, if (cxl_rr->nr_targets_set) { int i, distance; - distance = p->nr_targets / cxl_rr->nr_targets; + /* + * Passthrough ports impose no distance requirements between + * peers + */ + if (port->nr_dports == 1) + distance = 0; + else + distance = p->nr_targets / cxl_rr->nr_targets; for (i = 0; i < cxl_rr->nr_targets_set; i++) if (ep->dport == cxlsd->target[i]) { rc = check_last_peer(cxled, ep, cxl_rr, -- cgit v1.2.3