From 48c62fb051af3850e631b573e5393a2b0808ef10 Mon Sep 17 00:00:00 2001 From: Kedareswara rao Appana Date: Wed, 3 Jan 2018 12:12:09 +0530 Subject: dmaengine: xilinx_dma: properly configure the SG mode bit in the driver for cdma If the hardware is configured for Scatter Gather(SG) mode, and hardware is idle, in the control register SG mode bit must be set to a 0 then back to 1 by the software, to force the CDMA SG engine to use a new value written to the CURDESC_PNTR register, failure to do so could result errors from the dmaengine. This patch updates the same. Signed-off-by: Kedareswara rao Appana Signed-off-by: Vinod Koul --- drivers/dma/xilinx/xilinx_dma.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/dma') diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c index 88d317de6908..e32ebe0837af 100644 --- a/drivers/dma/xilinx/xilinx_dma.c +++ b/drivers/dma/xilinx/xilinx_dma.c @@ -1204,6 +1204,12 @@ static void xilinx_cdma_start_transfer(struct xilinx_dma_chan *chan) } if (chan->has_sg) { + dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR, + XILINX_CDMA_CR_SGMODE); + + dma_ctrl_set(chan, XILINX_DMA_REG_DMACR, + XILINX_CDMA_CR_SGMODE); + xilinx_write(chan, XILINX_DMA_REG_CURDESC, head_desc->async_tx.phys); @@ -2052,6 +2058,10 @@ static int xilinx_dma_terminate_all(struct dma_chan *dchan) chan->cyclic = false; } + if ((chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) && chan->has_sg) + dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR, + XILINX_CDMA_CR_SGMODE); + return 0; } -- cgit v1.2.3