From 9073d10b098973519044f5fcdc25586810b435da Mon Sep 17 00:00:00 2001 From: Michał Mirosław Date: Wed, 11 Dec 2019 03:40:55 +0100 Subject: mmc: core: Rework wp-gpio handling Use MMC_CAP2_RO_ACTIVE_HIGH flag as indicator if GPIO line is to be inverted compared to DT/platform-specified polarity. The flag is not used after init in GPIO mode anyway. No functional changes intended. Signed-off-by: Michał Mirosław Link: https://lore.kernel.org/r/a60f563f11bbff821da2fa2949ca82922b144860.1576031637.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson --- drivers/gpio/gpiolib-of.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/gpio/gpiolib-of.c') diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index dc27b1a88e93..b0b77e52e261 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -120,10 +120,6 @@ static void of_gpio_flags_quirks(struct device_node *np, if (of_property_read_bool(np, "cd-inverted")) *flags ^= OF_GPIO_ACTIVE_LOW; } - if (!strcmp(propname, "wp-gpios")) { - if (of_property_read_bool(np, "wp-inverted")) - *flags ^= OF_GPIO_ACTIVE_LOW; - } } /* * Some GPIO fixed regulator quirks. -- cgit v1.2.3 From 0f7c815d83a20dbae8b736331eb1ffd0bc0497d7 Mon Sep 17 00:00:00 2001 From: Michał Mirosław Date: Wed, 11 Dec 2019 03:40:56 +0100 Subject: mmc: core: Rework cd-gpio handling There are a few places around the code that invert inverted and possibly inverted CD line. That's really confusing. Squash them all into one place in mmc_gpiod_request_cd(). MMC_CAP2_CD_ACTIVE_HIGH is used analogously to WP line: in GPIO mode it is used only at probe time to switch polarity, for native mode it is left as is. Signed-off-by: Michał Mirosław Link: https://lore.kernel.org/r/db189b715596d63caf8c6a088bddc71dd69a879b.1576031637.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson --- drivers/gpio/gpiolib-of.c | 17 ----------------- drivers/mmc/core/host.c | 21 ++++----------------- drivers/mmc/core/slot-gpio.c | 17 ++++++++--------- 3 files changed, 12 insertions(+), 43 deletions(-) (limited to 'drivers/gpio/gpiolib-of.c') diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index b0b77e52e261..8310da48ba01 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -104,23 +104,6 @@ static void of_gpio_flags_quirks(struct device_node *np, enum of_gpio_flags *flags, int index) { - /* - * Handle MMC "cd-inverted" and "wp-inverted" semantics. - */ - if (IS_ENABLED(CONFIG_MMC)) { - /* - * Active low is the default according to the - * SDHCI specification and the device tree - * bindings. However the code in the current - * kernel was written such that the phandle - * flags were always respected, and "cd-inverted" - * would invert the flag from the device phandle. - */ - if (!strcmp(propname, "cd-gpios")) { - if (of_property_read_bool(np, "cd-inverted")) - *flags ^= OF_GPIO_ACTIVE_LOW; - } - } /* * Some GPIO fixed regulator quirks. * Note that active low is the default. diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index b3484def0a8b..e655dc1b5b85 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -175,7 +175,6 @@ int mmc_of_parse(struct mmc_host *host) struct device *dev = host->parent; u32 bus_width, drv_type, cd_debounce_delay_ms; int ret; - bool cd_cap_invert, cd_gpio_invert = false; if (!dev || !dev_fwnode(dev)) return 0; @@ -218,10 +217,12 @@ int mmc_of_parse(struct mmc_host *host) */ /* Parse Card Detection */ + if (device_property_read_bool(dev, "non-removable")) { host->caps |= MMC_CAP_NONREMOVABLE; } else { - cd_cap_invert = device_property_read_bool(dev, "cd-inverted"); + if (device_property_read_bool(dev, "cd-inverted")) + host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; if (device_property_read_u32(dev, "cd-debounce-delay-ms", &cd_debounce_delay_ms)) @@ -232,25 +233,11 @@ int mmc_of_parse(struct mmc_host *host) ret = mmc_gpiod_request_cd(host, "cd", 0, false, cd_debounce_delay_ms * 1000, - &cd_gpio_invert); + NULL); if (!ret) dev_info(host->parent, "Got CD GPIO\n"); else if (ret != -ENOENT && ret != -ENOSYS) return ret; - - /* - * There are two ways to flag that the CD line is inverted: - * through the cd-inverted flag and by the GPIO line itself - * being inverted from the GPIO subsystem. This is a leftover - * from the times when the GPIO subsystem did not make it - * possible to flag a line as inverted. - * - * If the capability on the host AND the GPIO line are - * both inverted, the end result is that the CD line is - * not inverted. - */ - if (cd_cap_invert ^ cd_gpio_invert) - host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; } /* Parse Write Protection */ diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c index 582ec3d720f6..303e825ecfd8 100644 --- a/drivers/mmc/core/slot-gpio.c +++ b/drivers/mmc/core/slot-gpio.c @@ -19,7 +19,6 @@ struct mmc_gpio { struct gpio_desc *ro_gpio; struct gpio_desc *cd_gpio; - bool override_cd_active_level; irqreturn_t (*cd_gpio_isr)(int irq, void *dev_id); char *ro_label; char *cd_label; @@ -80,13 +79,6 @@ int mmc_gpio_get_cd(struct mmc_host *host) return -ENOSYS; cansleep = gpiod_cansleep(ctx->cd_gpio); - if (ctx->override_cd_active_level) { - int value = cansleep ? - gpiod_get_raw_value_cansleep(ctx->cd_gpio) : - gpiod_get_raw_value(ctx->cd_gpio); - return !value ^ !!(host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH); - } - return cansleep ? gpiod_get_value_cansleep(ctx->cd_gpio) : gpiod_get_value(ctx->cd_gpio); @@ -194,10 +186,17 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id, ctx->cd_debounce_delay_ms = debounce / 1000; } + /* override forces default (active-low) polarity ... */ + if (override_active_level && !gpiod_is_active_low(desc)) + gpiod_toggle_active_low(desc); + + /* ... or active-high */ + if (host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH) + gpiod_toggle_active_low(desc); + if (gpio_invert) *gpio_invert = !gpiod_is_active_low(desc); - ctx->override_cd_active_level = override_active_level; ctx->cd_gpio = desc; return 0; -- cgit v1.2.3