From 7f48d0b48cba2ddc03d09353ba4ef6ae680da520 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 25 Apr 2017 10:05:12 +0100 Subject: drm/i915/gvt: fix typo: "supporte" -> "support" trivial fix to typo in WARN_ONCE message Signed-off-by: Colin Ian King Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/handlers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c index 6da9ae1618e3..31624f1df893 100644 --- a/drivers/gpu/drm/i915/gvt/handlers.c +++ b/drivers/gpu/drm/i915/gvt/handlers.c @@ -1240,7 +1240,7 @@ static int dma_ctrl_write(struct intel_vgpu *vgpu, unsigned int offset, mode = vgpu_vreg(vgpu, offset); if (GFX_MODE_BIT_SET_IN_MASK(mode, START_DMA)) { - WARN_ONCE(1, "VM(%d): iGVT-g doesn't supporte GuC\n", + WARN_ONCE(1, "VM(%d): iGVT-g doesn't support GuC\n", vgpu->id); return 0; } -- cgit v1.2.3 From 2345ab1df8a9aa3cdca942142b48eb141faeb1c3 Mon Sep 17 00:00:00 2001 From: Chuanxiao Dong Date: Mon, 8 May 2017 09:27:39 +0800 Subject: drm/i915/gvt: not to restore in-context mmio Needn't to restore the in-context MMIO when SCHEDULE_OUT. Sometimes with restoring the in-context MMIO, some GPU hang can be observed. So remove the in-context MMIO restore Signed-off-by: Chuanxiao Dong Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/render.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/gvt/render.c b/drivers/gpu/drm/i915/gvt/render.c index 0beb83563b08..05b75b9f852a 100644 --- a/drivers/gpu/drm/i915/gvt/render.c +++ b/drivers/gpu/drm/i915/gvt/render.c @@ -333,6 +333,9 @@ void intel_gvt_restore_render_mmio(struct intel_vgpu *vgpu, int ring_id) } else v = mmio->value; + if (mmio->in_context) + continue; + I915_WRITE(mmio->reg, v); POSTING_READ(mmio->reg); -- cgit v1.2.3 From ae157902aea13926e9596d091cad6bd87b3be084 Mon Sep 17 00:00:00 2001 From: Ping Gao Date: Wed, 19 Apr 2017 14:02:31 +0800 Subject: drm/i915/gvt: avoid unnecessary vgpu switch It's no need to switch vgpu if next vgpu is the same with current vgpu, otherwise it will make performance drop in some case. v2: correct the comments. Signed-off-by: Ping Gao Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/sched_policy.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/gvt/sched_policy.c b/drivers/gpu/drm/i915/gvt/sched_policy.c index 34b9acdf3479..6ac77f8cc405 100644 --- a/drivers/gpu/drm/i915/gvt/sched_policy.c +++ b/drivers/gpu/drm/i915/gvt/sched_policy.c @@ -53,9 +53,13 @@ static void try_to_schedule_next_vgpu(struct intel_gvt *gvt) enum intel_engine_id i; struct intel_engine_cs *engine; - /* no target to schedule */ - if (!scheduler->next_vgpu) + /* no need to schedule if next_vgpu is the same with current_vgpu, + * let scheduler chose next_vgpu again by setting it to NULL. + */ + if (scheduler->next_vgpu == scheduler->current_vgpu) { + scheduler->next_vgpu = NULL; return; + } gvt_dbg_sched("try to schedule next vgpu %d\n", scheduler->next_vgpu->id); -- cgit v1.2.3 From 9b5fed0daa2a9ea3355ef06bb9e87ce800e71df6 Mon Sep 17 00:00:00 2001 From: Ander Conselvan de Oliveira Date: Fri, 28 Apr 2017 11:02:22 +0300 Subject: drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages The sequence in glk_dsi_device_ready() enters ULPS then waits until it is *not* active to then disable it. The correct sequence according to the spec is to enter ULPS then wait until the GLK_ULPS_NOT_ACTIVE bit is zero, i.e., ULPS is active, and then disable ULPS. Fixing the condition gets rid of the following spurious error messages: [drm:glk_dsi_device_ready [i915]] *ERROR* ULPS is still active Fixes: 4644848369c0 ("drm/i915/glk: Add MIPIIO Enable/disable sequence") Cc: Deepak M Cc: Madhav Chauhan Cc: Jani Nikula Cc: Daniel Vetter Cc: Jani Nikula Cc: intel-gfx@lists.freedesktop.org Cc: Signed-off-by: Ander Conselvan de Oliveira Reviewed-by: Madhav Chauhan Link: http://patchwork.freedesktop.org/patch/msgid/20170428080222.6147-1-ander.conselvan.de.oliveira@intel.com (cherry picked from commit 3acbec03b3c51559d01c879e9564d9c9610fe8ce) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dsi.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 3ffe8b1f1d48..fc0ef492252a 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -410,11 +410,10 @@ static void glk_dsi_device_ready(struct intel_encoder *encoder) val |= (ULPS_STATE_ENTER | DEVICE_READY); I915_WRITE(MIPI_DEVICE_READY(port), val); - /* Wait for ULPS Not active */ + /* Wait for ULPS active */ if (intel_wait_for_register(dev_priv, - MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE, - GLK_ULPS_NOT_ACTIVE, 20)) - DRM_ERROR("ULPS is still active\n"); + MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE, 0, 20)) + DRM_ERROR("ULPS not active\n"); /* Exit ULPS */ val = I915_READ(MIPI_DEVICE_READY(port)); -- cgit v1.2.3 From 668e3b014afb66ab29e134bca7c258527273ac75 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Thu, 27 Apr 2017 19:02:20 +0300 Subject: drm/i915: Fix runtime PM for LPE audio Not calling pm_runtime_enable() means that runtime PM can't be enabled at all via sysfs. So we definitely need to call it from somewhere. Calling it from the driver seems like a bad idea because it would have to be paired with a pm_runtime_disable() at driver unload time, otherwise the core gets upset. Also if there's no LPE audio driver loaded then we couldn't runtime suspend i915 either. So it looks like a better plan is to call it from i915 when we register the platform device. That seems to match how pci generally does things. I cargo culted the pm_runtime_forbid() and pm_runtime_set_active() calls from pci as well. The exposed runtime PM API is massive an thorougly misleading, so I don't actually know if this is how you're supposed to use the API or not. But it seems to work. I can now runtime suspend i915 again with or without the LPE audio driver loaded, and reloading the LPE audio driver also seems to work. Note that powertop won't auto-tune runtime PM for platform devices, which is a little annoying. So I'm not sure that leaving runtime PM in "on" mode by default is the best choice here. But I've left it like that for now at least. Also remove the comment about there not being much benefit from LPE audio runtime PM. Not allowing runtime PM blocks i915 runtime PM, which will also block s0ix, and that could have a measurable impact on power consumption. Cc: stable@vger.kernel.org Cc: Takashi Iwai Cc: Pierre-Louis Bossart Fixes: 0b6b524f3915 ("ALSA: x86: Don't enable runtime PM as default") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-2-ville.syrjala@linux.intel.com Reviewed-by: Takashi Iwai (cherry picked from commit 183c00350ccda86781f6695840e6c5f5b22efbd1) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_lpe_audio.c | 5 +++++ sound/x86/intel_hdmi_audio.c | 4 ---- 2 files changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c index 25d8e76489e4..668f00480d97 100644 --- a/drivers/gpu/drm/i915/intel_lpe_audio.c +++ b/drivers/gpu/drm/i915/intel_lpe_audio.c @@ -63,6 +63,7 @@ #include #include #include +#include #include "i915_drv.h" #include @@ -121,6 +122,10 @@ lpe_audio_platdev_create(struct drm_i915_private *dev_priv) kfree(rsc); + pm_runtime_forbid(&platdev->dev); + pm_runtime_set_active(&platdev->dev); + pm_runtime_enable(&platdev->dev); + return platdev; err: diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c index 664b7fe206d6..b11d3920b9a5 100644 --- a/sound/x86/intel_hdmi_audio.c +++ b/sound/x86/intel_hdmi_audio.c @@ -1809,10 +1809,6 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev) pdata->notify_pending = false; spin_unlock_irq(&pdata->lpe_audio_slock); - /* runtime PM isn't enabled as default, since it won't save much on - * BYT/CHT devices; user who want the runtime PM should adjust the - * power/ontrol and power/autosuspend_delay_ms sysfs entries instead - */ pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_mark_last_busy(&pdev->dev); pm_runtime_set_active(&pdev->dev); -- cgit v1.2.3 From 82f2b4aca8fd90476fc3fd1786d107163ab17201 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Thu, 4 May 2017 21:15:30 +0300 Subject: drm/i915: Fix rawclk readout for g4x Turns out our skills in decoding the CLKCFG register weren't good enough. On this particular elk the answer we got was 400 MHz when in reality the clock was running at 266 MHz, which then caused us to program a bogus AUX clock divider that caused all AUX communication to fail. Sadly the docs are now in bit heaven, so the fix will have to be based on empirical evidence. Using another elk machine I was able to frob the FSB frequency from the BIOS and see how it affects the CLKCFG register. The machine seesm to use a frequency of 266 MHz by default, and fortunately it still boot even with the 50% CPU overclock that we get when we bump the FSB up to 400 MHz. It turns out the actual FSB frequency and the register have no real link whatsoever. The register value is based on some straps or something, but fortunately those too can be configured from the BIOS on this board, although it doesn't seem to respect the settings 100%. In the end I was able to derive the following relationship: BIOS FSB / strap | CLKCFG ------------------------- 200 | 0x2 266 | 0x0 333 | 0x4 400 | 0x4 So only the 200 and 400 MHz cases actually match how we're currently decoding that register. But as the comment next to some of the defines says, we have been just guessing anyway. So let's fix things up so that at least the 266 MHz case will work correctly as that is actually the setting used by both the buggy machine and my test machine. The fact that 333 and 400 MHz BIOS settings result in the same register value is a little disappointing, as that means we can't tell them apart. However, according to the gmch datasheet for both elk and ctg 400 Mhz is not even a supported FSB frequency, so I'm going to make the assumption that we should decode it as 333 MHz instead. Cc: stable@vger.kernel.org Cc: Tomi Sarvela Reported-by: Tomi Sarvela Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100926 Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/20170504181530.6908-1-ville.syrjala@linux.intel.com Acked-by: Jani Nikula Tested-by: Tomi Sarvela (cherry picked from commit 6f38123ecaac446312a63523b68df84ceb5a06ed) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_reg.h | 10 +++++++--- drivers/gpu/drm/i915/intel_cdclk.c | 6 ++---- 2 files changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 11b12f412492..5a7c63e64381 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3051,10 +3051,14 @@ enum skl_disp_power_wells { #define CLKCFG_FSB_667 (3 << 0) /* hrawclk 166 */ #define CLKCFG_FSB_800 (2 << 0) /* hrawclk 200 */ #define CLKCFG_FSB_1067 (6 << 0) /* hrawclk 266 */ +#define CLKCFG_FSB_1067_ALT (0 << 0) /* hrawclk 266 */ #define CLKCFG_FSB_1333 (7 << 0) /* hrawclk 333 */ -/* Note, below two are guess */ -#define CLKCFG_FSB_1600 (4 << 0) /* hrawclk 400 */ -#define CLKCFG_FSB_1600_ALT (0 << 0) /* hrawclk 400 */ +/* + * Note that on at least on ELK the below value is reported for both + * 333 and 400 MHz BIOS FSB setting, but given that the gmch datasheet + * lists only 200/266/333 MHz FSB as supported let's decode it as 333 MHz. + */ +#define CLKCFG_FSB_1333_ALT (4 << 0) /* hrawclk 333 */ #define CLKCFG_FSB_MASK (7 << 0) #define CLKCFG_MEM_533 (1 << 4) #define CLKCFG_MEM_667 (2 << 4) diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c index dd3ad52b7dfe..f29a226e24d8 100644 --- a/drivers/gpu/drm/i915/intel_cdclk.c +++ b/drivers/gpu/drm/i915/intel_cdclk.c @@ -1798,13 +1798,11 @@ static int g4x_hrawclk(struct drm_i915_private *dev_priv) case CLKCFG_FSB_800: return 200000; case CLKCFG_FSB_1067: + case CLKCFG_FSB_1067_ALT: return 266667; case CLKCFG_FSB_1333: + case CLKCFG_FSB_1333_ALT: return 333333; - /* these two are just a guess; one of them might be right */ - case CLKCFG_FSB_1600: - case CLKCFG_FSB_1600_ALT: - return 400000; default: return 133333; } -- cgit v1.2.3 From 2f720aac936dc7a301b757d3b197d86c333d59b8 Mon Sep 17 00:00:00 2001 From: Matthew Auld Date: Fri, 12 May 2017 10:14:23 +0100 Subject: drm/i915: don't do allocate_va_range again on PIN_UPDATE If a vma is already bound to a ppgtt, we incorrectly call allocate_va_range again when doing a PIN_UPDATE, which will result in over accounting within our paging structures, such that when we do unbind something we don't actually destroy the structures and end up inadvertently recycling them. In reality this probably isn't too bad, but once we start touching PDEs and PDPEs for 64K/2M/1G pages this apparent recycling will manifest into lots of really, really subtle bugs. v2: Fix the testing of vma->flags for aliasing_ppgtt_bind_vma Fixes: ff685975d97f ("drm/i915: Move allocate_va_range to GTT") Signed-off-by: Matthew Auld Cc: Chris Wilson Cc: Joonas Lahtinen Reviewed-by: Chris Wilson Link: http://patchwork.freedesktop.org/patch/msgid/20170512091423.26085-1-chris@chris-wilson.co.uk (cherry picked from commit 1f23475c893a85c934143cd64865ebb9b6af383f) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_gtt.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 2aa6b97fd22f..a0563e18d753 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -195,9 +195,12 @@ static int ppgtt_bind_vma(struct i915_vma *vma, u32 pte_flags; int ret; - ret = vma->vm->allocate_va_range(vma->vm, vma->node.start, vma->size); - if (ret) - return ret; + if (!(vma->flags & I915_VMA_LOCAL_BIND)) { + ret = vma->vm->allocate_va_range(vma->vm, vma->node.start, + vma->size); + if (ret) + return ret; + } vma->pages = vma->obj->mm.pages; @@ -2306,7 +2309,8 @@ static int aliasing_gtt_bind_vma(struct i915_vma *vma, if (flags & I915_VMA_LOCAL_BIND) { struct i915_hw_ppgtt *appgtt = i915->mm.aliasing_ppgtt; - if (appgtt->base.allocate_va_range) { + if (!(vma->flags & I915_VMA_LOCAL_BIND) && + appgtt->base.allocate_va_range) { ret = appgtt->base.allocate_va_range(&appgtt->base, vma->node.start, vma->node.size); -- cgit v1.2.3