From 23bd15ec662344dc10e9918fdd0dbc58bc71526d Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Wed, 14 Dec 2011 21:10:06 -0200 Subject: drm/i915: Fix TV Out refresh rate. TV Out refresh rate was half of the specification for almost all modes. Due to this reason pixel clock was so low for some modes causing flickering screen. Signed-off-by: Rodrigo Vivi Reviewed-by: Jesse Barnes Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_tv.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index f3c6a9a8b081..2b1fcadbc5ce 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -417,7 +417,7 @@ static const struct tv_mode tv_modes[] = { { .name = "NTSC-M", .clock = 108000, - .refresh = 29970, + .refresh = 59940, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, /* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */ @@ -460,7 +460,7 @@ static const struct tv_mode tv_modes[] = { { .name = "NTSC-443", .clock = 108000, - .refresh = 29970, + .refresh = 59940, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, /* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 4.43MHz */ @@ -502,7 +502,7 @@ static const struct tv_mode tv_modes[] = { { .name = "NTSC-J", .clock = 108000, - .refresh = 29970, + .refresh = 59940, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, @@ -545,7 +545,7 @@ static const struct tv_mode tv_modes[] = { { .name = "PAL-M", .clock = 108000, - .refresh = 29970, + .refresh = 59940, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, @@ -589,7 +589,7 @@ static const struct tv_mode tv_modes[] = { /* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */ .name = "PAL-N", .clock = 108000, - .refresh = 25000, + .refresh = 50000, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, @@ -634,7 +634,7 @@ static const struct tv_mode tv_modes[] = { /* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */ .name = "PAL", .clock = 108000, - .refresh = 25000, + .refresh = 50000, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, @@ -821,7 +821,7 @@ static const struct tv_mode tv_modes[] = { { .name = "1080i@50Hz", .clock = 148800, - .refresh = 25000, + .refresh = 50000, .oversample = TV_OVERSAMPLE_2X, .component_only = 1, @@ -847,7 +847,7 @@ static const struct tv_mode tv_modes[] = { { .name = "1080i@60Hz", .clock = 148800, - .refresh = 30000, + .refresh = 60000, .oversample = TV_OVERSAMPLE_2X, .component_only = 1, -- cgit v1.2.3 From 55a6713b3f30a5024056027e9dbf03ac8f13bfc9 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Thu, 15 Dec 2011 14:47:33 -0200 Subject: drm/i915: Removing TV Out modes. These modes are no longer needed or are not according to TV timing standards. Intel PRM Vol 3 - Display Registers Updated - Section 5 TV-Out Programming / 5.2.1 Television Standards / 5.2.1.1 Timing tables Signed-off-by: Rodrigo Vivi Reviewed-by: Jesse Barnes Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_tv.c | 122 ---------------------------------------- 1 file changed, 122 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index 2b1fcadbc5ce..1571be37ce3e 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -673,78 +673,6 @@ static const struct tv_mode tv_modes[] = { .filter_table = filter_table, }, - { - .name = "480p@59.94Hz", - .clock = 107520, - .refresh = 59940, - .oversample = TV_OVERSAMPLE_4X, - .component_only = 1, - - .hsync_end = 64, .hblank_end = 122, - .hblank_start = 842, .htotal = 857, - - .progressive = true, .trilevel_sync = false, - - .vsync_start_f1 = 12, .vsync_start_f2 = 12, - .vsync_len = 12, - - .veq_ena = false, - - .vi_end_f1 = 44, .vi_end_f2 = 44, - .nbr_end = 479, - - .burst_ena = false, - - .filter_table = filter_table, - }, - { - .name = "480p@60Hz", - .clock = 107520, - .refresh = 60000, - .oversample = TV_OVERSAMPLE_4X, - .component_only = 1, - - .hsync_end = 64, .hblank_end = 122, - .hblank_start = 842, .htotal = 856, - - .progressive = true, .trilevel_sync = false, - - .vsync_start_f1 = 12, .vsync_start_f2 = 12, - .vsync_len = 12, - - .veq_ena = false, - - .vi_end_f1 = 44, .vi_end_f2 = 44, - .nbr_end = 479, - - .burst_ena = false, - - .filter_table = filter_table, - }, - { - .name = "576p", - .clock = 107520, - .refresh = 50000, - .oversample = TV_OVERSAMPLE_4X, - .component_only = 1, - - .hsync_end = 64, .hblank_end = 139, - .hblank_start = 859, .htotal = 863, - - .progressive = true, .trilevel_sync = false, - - .vsync_start_f1 = 10, .vsync_start_f2 = 10, - .vsync_len = 10, - - .veq_ena = false, - - .vi_end_f1 = 48, .vi_end_f2 = 48, - .nbr_end = 575, - - .burst_ena = false, - - .filter_table = filter_table, - }, { .name = "720p@60Hz", .clock = 148800, @@ -769,30 +697,6 @@ static const struct tv_mode tv_modes[] = { .filter_table = filter_table, }, - { - .name = "720p@59.94Hz", - .clock = 148800, - .refresh = 59940, - .oversample = TV_OVERSAMPLE_2X, - .component_only = 1, - - .hsync_end = 80, .hblank_end = 300, - .hblank_start = 1580, .htotal = 1651, - - .progressive = true, .trilevel_sync = true, - - .vsync_start_f1 = 10, .vsync_start_f2 = 10, - .vsync_len = 10, - - .veq_ena = false, - - .vi_end_f1 = 29, .vi_end_f2 = 29, - .nbr_end = 719, - - .burst_ena = false, - - .filter_table = filter_table, - }, { .name = "720p@50Hz", .clock = 148800, @@ -868,32 +772,6 @@ static const struct tv_mode tv_modes[] = { .burst_ena = false, - .filter_table = filter_table, - }, - { - .name = "1080i@59.94Hz", - .clock = 148800, - .refresh = 29970, - .oversample = TV_OVERSAMPLE_2X, - .component_only = 1, - - .hsync_end = 88, .hblank_end = 235, - .hblank_start = 2155, .htotal = 2201, - - .progressive = false, .trilevel_sync = true, - - .vsync_start_f1 = 4, .vsync_start_f2 = 5, - .vsync_len = 10, - - .veq_ena = true, .veq_start_f1 = 4, - .veq_start_f2 = 4, .veq_len = 10, - - - .vi_end_f1 = 21, .vi_end_f2 = 22, - .nbr_end = 539, - - .burst_ena = false, - .filter_table = filter_table, }, }; -- cgit v1.2.3 From ba68e086223a5f149f37bf8692c8cdbf1b0ba3ef Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 6 Jan 2012 19:45:34 -0200 Subject: drm/i915/sdvo: always set positive sync polarity This is a revert of 81a14b46846fea0741902e8d8dfcc6c6c78154c8. We already set the mode polarity using the SDVO commands with struct intel_sdvo_dtd. We have at least 3 bugs that get fixed with this patch. The documentation, despite not clear, can also be interpreted in a way that suggests this patch is needed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=15766 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42174 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43333 Cc: stable@kernel.org Reviewed-by: Eric Anholt Reviewed-by: Jesse Barnes Signed-off-by: Paulo Zanoni Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_sdvo.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index f7b9268df266..e334ec33a47d 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1066,15 +1066,13 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, /* Set the SDVO control regs. */ if (INTEL_INFO(dev)->gen >= 4) { - sdvox = 0; + /* The real mode polarity is set by the SDVO commands, using + * struct intel_sdvo_dtd. */ + sdvox = SDVO_VSYNC_ACTIVE_HIGH | SDVO_HSYNC_ACTIVE_HIGH; if (intel_sdvo->is_hdmi) sdvox |= intel_sdvo->color_range; if (INTEL_INFO(dev)->gen < 5) sdvox |= SDVO_BORDER_ENABLE; - if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) - sdvox |= SDVO_VSYNC_ACTIVE_HIGH; - if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) - sdvox |= SDVO_HSYNC_ACTIVE_HIGH; } else { sdvox = I915_READ(intel_sdvo->sdvo_reg); switch (intel_sdvo->sdvo_reg) { -- cgit v1.2.3 From a05a586239c66a256ea1fbae859e742e4c91c8d9 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 20 Dec 2011 08:54:15 -0800 Subject: drm/i915: Print debugfs object list sizes in KiB instead of bytes. They're all in increments of pages, so this just makes it easier on the eyes. Signed-off-by: Eric Anholt Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_debugfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 11807989f918..f8b8ed22b4dc 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -121,11 +121,11 @@ static const char *cache_level_str(int type) static void describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj) { - seq_printf(m, "%p: %s%s %8zd %04x %04x %d %d%s%s%s", + seq_printf(m, "%p: %s%s %8zdKiB %04x %04x %d %d%s%s%s", &obj->base, get_pin_flag(obj), get_tiling_flag(obj), - obj->base.size, + obj->base.size / 1024, obj->base.read_domains, obj->base.write_domain, obj->last_rendering_seqno, -- cgit v1.2.3 From 5e5b7fa2ad84f7806d0c7f5af8e1440bc91b4ec7 Mon Sep 17 00:00:00 2001 From: Eugeni Dodonov Date: Sat, 7 Jan 2012 23:40:34 -0200 Subject: drm/i915: simplify pipe checking This is also handled by i915_reg.h, so just reuse this trick to reduce universe entropy. Signed-off-by: Eugeni Dodonov Reviewed-by: Jesse Barnes Reviewed-by: Cyril Brulebois Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_suspend.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 7886e4fb60e3..c0b945cdcd9a 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -28,6 +28,7 @@ #include "drm.h" #include "i915_drm.h" #include "intel_drv.h" +#include "i915_reg.h" static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe) { @@ -35,7 +36,7 @@ static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe) u32 dpll_reg; if (HAS_PCH_SPLIT(dev)) - dpll_reg = (pipe == PIPE_A) ? _PCH_DPLL_A : _PCH_DPLL_B; + dpll_reg = PCH_DPLL(pipe); else dpll_reg = (pipe == PIPE_A) ? _DPLL_A : _DPLL_B; -- cgit v1.2.3 From 07c1e8c1462fa7324de4c36ae9e55da2abd79cee Mon Sep 17 00:00:00 2001 From: Eugeni Dodonov Date: Sat, 7 Jan 2012 23:40:35 -0200 Subject: drm/i915: handle 3rd pipe We don't need to check 3rd pipe specifically, as it shares PLL with some other one. Signed-off-by: Eugeni Dodonov Reviewed-by: Jesse Barnes Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_suspend.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index c0b945cdcd9a..30d924f447c0 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -35,6 +35,10 @@ static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe) struct drm_i915_private *dev_priv = dev->dev_private; u32 dpll_reg; + /* On IVB, 3rd pipe shares PLL with another one */ + if (pipe > 1) + return false; + if (HAS_PCH_SPLIT(dev)) dpll_reg = PCH_DPLL(pipe); else -- cgit v1.2.3 From 8ca4013d702dae4913fbb625aabf4c2966cdf1f0 Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Tue, 25 Oct 2011 15:42:21 -0700 Subject: CHROMIUM: i915: Add DMI override to skip CRT initialization on ZGB This is the method used to override LVDS in intel_lvds and appears to be an effective way to ensure that the driver does not enable VGA hotplug. This is the same patch from 2.6.32 kernel in R12 but ported to 2.6.38, will send upstream next. Signed-off-by: Duncan Laurie BUG=chrome-os-partner:117 TEST=Check PORT_HOTPLUG_EN to see if hotplug interrupt is disabled. Run the following command as root, specifically looking at bit 9: mmio_read32 $[$(pci_read32 0 2 0 0x10) + 0x61110] = 0x00000000 Change-Id: Id8240f9fb31d058d8d79ee72f7b4615c43893f5a Reviewed-on: http://gerrit.chromium.org/gerrit/1390 Reviewed-by: Olof Johansson Tested-by: Duncan Laurie Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_crt.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index fee0ad02c6d0..dd729d46a61f 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -24,6 +24,7 @@ * Eric Anholt */ +#include #include #include #include "drmP.h" @@ -540,6 +541,24 @@ static const struct drm_encoder_funcs intel_crt_enc_funcs = { .destroy = intel_encoder_destroy, }; +static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id) +{ + DRM_DEBUG_KMS("Skipping CRT initialization for %s\n", id->ident); + return 1; +} + +static const struct dmi_system_id intel_no_crt[] = { + { + .callback = intel_no_crt_dmi_callback, + .ident = "ACER ZGB", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ACER"), + DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"), + }, + }, + { } +}; + void intel_crt_init(struct drm_device *dev) { struct drm_connector *connector; @@ -547,6 +566,10 @@ void intel_crt_init(struct drm_device *dev) struct intel_connector *intel_connector; struct drm_i915_private *dev_priv = dev->dev_private; + /* Skip machines without VGA that falsely report hotplug events */ + if (dmi_check_system(intel_no_crt)) + return; + crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL); if (!crt) return; -- cgit v1.2.3 From 44306ab302687b519a31aa498b954c1e26f95a6b Mon Sep 17 00:00:00 2001 From: Joel Sass Date: Tue, 10 Jan 2012 13:03:55 -0500 Subject: drm/i915: Add Clientron E830 to the ignore LVDS list Signed-off-by: Joel Sass Reviewed-by: Adam Jackson Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_lvds.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index e44191132ac4..798f6e1aa544 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -708,6 +708,14 @@ static const struct dmi_system_id intel_no_lvds[] = { }, }, { + .callback = intel_no_lvds_dmi_callback, + .ident = "Clientron E830", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Clientron"), + DMI_MATCH(DMI_PRODUCT_NAME, "E830"), + }, + }, + { .callback = intel_no_lvds_dmi_callback, .ident = "Asus EeeBox PC EB1007", .matches = { -- cgit v1.2.3