From e0cd85dc666cb08e1bd313d560cb4eff4d04219e Mon Sep 17 00:00:00 2001 From: Aleksa Savic Date: Sat, 4 May 2024 11:25:01 +0200 Subject: hwmon: (corsair-cpro) Use a separate buffer for sending commands Introduce cmd_buffer, a separate buffer for storing only the command that is sent to the device. Before this separation, the existing buffer was shared for both the command and the report received in ccp_raw_event(), which was copied into it. However, because of hidraw, the raw event parsing may be triggered in the middle of sending a command, resulting in outputting gibberish to the device. Using a separate buffer resolves this. Fixes: 40c3a4454225 ("hwmon: add Corsair Commander Pro driver") Signed-off-by: Aleksa Savic Acked-by: Marius Zachmann Link: https://lore.kernel.org/r/20240504092504.24158-2-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck --- drivers/hwmon/corsair-cpro.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/corsair-cpro.c b/drivers/hwmon/corsair-cpro.c index a284a02839fb..8d85f66f8143 100644 --- a/drivers/hwmon/corsair-cpro.c +++ b/drivers/hwmon/corsair-cpro.c @@ -79,6 +79,7 @@ struct ccp_device { struct device *hwmon_dev; struct completion wait_input_report; struct mutex mutex; /* whenever buffer is used, lock before send_usb_cmd */ + u8 *cmd_buffer; u8 *buffer; int target[6]; DECLARE_BITMAP(temp_cnct, NUM_TEMP_SENSORS); @@ -111,15 +112,15 @@ static int send_usb_cmd(struct ccp_device *ccp, u8 command, u8 byte1, u8 byte2, unsigned long t; int ret; - memset(ccp->buffer, 0x00, OUT_BUFFER_SIZE); - ccp->buffer[0] = command; - ccp->buffer[1] = byte1; - ccp->buffer[2] = byte2; - ccp->buffer[3] = byte3; + memset(ccp->cmd_buffer, 0x00, OUT_BUFFER_SIZE); + ccp->cmd_buffer[0] = command; + ccp->cmd_buffer[1] = byte1; + ccp->cmd_buffer[2] = byte2; + ccp->cmd_buffer[3] = byte3; reinit_completion(&ccp->wait_input_report); - ret = hid_hw_output_report(ccp->hdev, ccp->buffer, OUT_BUFFER_SIZE); + ret = hid_hw_output_report(ccp->hdev, ccp->cmd_buffer, OUT_BUFFER_SIZE); if (ret < 0) return ret; @@ -492,7 +493,11 @@ static int ccp_probe(struct hid_device *hdev, const struct hid_device_id *id) if (!ccp) return -ENOMEM; - ccp->buffer = devm_kmalloc(&hdev->dev, OUT_BUFFER_SIZE, GFP_KERNEL); + ccp->cmd_buffer = devm_kmalloc(&hdev->dev, OUT_BUFFER_SIZE, GFP_KERNEL); + if (!ccp->cmd_buffer) + return -ENOMEM; + + ccp->buffer = devm_kmalloc(&hdev->dev, IN_BUFFER_SIZE, GFP_KERNEL); if (!ccp->buffer) return -ENOMEM; -- cgit v1.2.3