From 88b2b32babd46cd54d2de4d17eb869aea3383e11 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 13 Oct 2007 17:47:51 +0200 Subject: ide: move ide_config_drive_speed() calls to upper layers (take 2) * Convert {ide_hwif_t,ide_pci_device_t}->host_flag to be u16. * Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program the host for the transfer mode after programming the device. Set it in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac and via82cxxx host drivers. * Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely skip programming of host/device for the transfer mode ("smart" hosts). Set it in it821x host driver and check it in ide_tune_dma(). * Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all direct ->set_pio_mode/->speedproc users to use these helpers. * Move ide_config_drive_speed() calls from ->set_pio_mode/->speedproc methods to callers. * Rename ->speedproc method to ->set_dma_mode, make it void and update all implementations accordingly. * Update ide_set_xfer_rate() comments. * Unexport ide_config_drive_speed(). v2: * Fix issues noticed by Sergei: - export ide_set_dma_mode() instead of moving ->set_pio_mode abuse wrt to setting DMA modes from sc1200_set_pio_mode() to do_special() - check IDE_HFLAG_NO_SET_MODE in ide_tune_dma() - check for (hwif->set_pio_mode) == NULL in ide_set_pio_mode() - check for (hwif->set_dma_mode) == NULL in ide_set_dma_mode() - return -1 from ide_set_{pio,dma}_mode() if ->set_{pio,dma}_mode == NULL - don't set ->set_{pio,dma}_mode on it821x in "smart" mode - fix build problem in pmac.c - minor fixes in au1xxx-ide.c/cs5530.c/siimage.c - improve patch description Changes in behavior caused by this patch: - HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change PIO mode if it821x controller is in "smart" mode - removal of two debugging printk-s (from cs5530.c and sc1200.c) - transfer modes 0x00-0x07 passed from user space may be programmed twice on the device (not really an issue since 0x00 is not supported correctly by any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid) Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/hpt34x.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers/ide/pci/hpt34x.c') diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c index a1bb10188fe5..218852aaf22a 100644 --- a/drivers/ide/pci/hpt34x.c +++ b/drivers/ide/pci/hpt34x.c @@ -43,7 +43,7 @@ #define HPT343_DEBUG_DRIVE_INFO 0 -static int hpt34x_tune_chipset(ide_drive_t *drive, const u8 speed) +static void hpt34x_set_mode(ide_drive_t *drive, const u8 speed) { struct pci_dev *dev = HWIF(drive)->pci_dev; u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0; @@ -73,13 +73,11 @@ static int hpt34x_tune_chipset(ide_drive_t *drive, const u8 speed) drive->dn, reg1, tmp1, reg2, tmp2, hi_speed, lo_speed); #endif /* HPT343_DEBUG_DRIVE_INFO */ - - return(ide_config_drive_speed(drive, speed)); } static void hpt34x_set_pio_mode(ide_drive_t *drive, const u8 pio) { - (void) hpt34x_tune_chipset(drive, (XFER_PIO_0 + pio)); + hpt34x_set_mode(drive, XFER_PIO_0 + pio); } static int hpt34x_config_drive_xfer_rate (ide_drive_t *drive) @@ -145,7 +143,8 @@ static void __devinit init_hwif_hpt34x(ide_hwif_t *hwif) hwif->autodma = 0; hwif->set_pio_mode = &hpt34x_set_pio_mode; - hwif->speedproc = &hpt34x_tune_chipset; + hwif->set_dma_mode = &hpt34x_set_mode; + hwif->drives[0].autotune = 1; hwif->drives[1].autotune = 1; -- cgit v1.2.3