From ac95beedf8bc97b24f9540d4da9952f07221c023 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 26 Apr 2008 22:25:14 +0200 Subject: ide: add struct ide_port_ops (take 2) * Move hooks for port/host specific methods from ide_hwif_t to 'struct ide_port_ops'. * Add 'const struct ide_port_ops *port_ops' to 'struct ide_port_info' and ide_hwif_t. * Update host drivers and core code accordingly. While at it: * Rename ata66_*() cable detect functions to *_cable_detect() to match the standard naming. (Suggested by Sergei Shtylyov) v2: * Fix build for bast-ide. (Noticed by Andrew Morton) Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/it821x.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers/ide/pci/it821x.c') diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index a38ec47423a0..7f4db1c0a4fc 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -418,7 +418,7 @@ static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed) } /** - * ata66_it821x - check for 80 pin cable + * it821x_cable_detect - cable detection * @hwif: interface to check * * Check for the presence of an ATA66 capable cable on the @@ -426,7 +426,7 @@ static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed) * the needed logic onboard. */ -static u8 __devinit ata66_it821x(ide_hwif_t *hwif) +static u8 __devinit it821x_cable_detect(ide_hwif_t *hwif) { /* The reference driver also only does disk side */ return ATA_CBL_PATA80; @@ -527,8 +527,6 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif) struct it821x_dev *idev = itdevs[hwif->channel]; u8 conf; - hwif->quirkproc = &it821x_quirkproc; - ide_set_hwifdata(hwif, idev); pci_read_config_byte(dev, 0x50, &conf); @@ -563,17 +561,12 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif) } if (idev->smart == 0) { - hwif->set_pio_mode = &it821x_set_pio_mode; - hwif->set_dma_mode = &it821x_set_dma_mode; - /* MWDMA/PIO clock switching for pass through mode */ hwif->dma_start = &it821x_dma_start; hwif->ide_dma_end = &it821x_dma_end; } else hwif->host_flags |= IDE_HFLAG_NO_SET_MODE; - hwif->cable_detect = ata66_it821x; - if (hwif->dma_base == 0) return; @@ -613,12 +606,20 @@ static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const cha return 0; } +static const struct ide_port_ops it821x_port_ops = { + /* it821x_set_{pio,dma}_mode() are only used in pass-through mode */ + .set_pio_mode = it821x_set_pio_mode, + .set_dma_mode = it821x_set_dma_mode, + .quirkproc = it821x_quirkproc, + .cable_detect = it821x_cable_detect, +}; #define DECLARE_ITE_DEV(name_str) \ { \ .name = name_str, \ .init_chipset = init_chipset_it821x, \ .init_hwif = init_hwif_it821x, \ + .port_ops = &it821x_port_ops, \ .pio_mask = ATA_PIO4, \ } -- cgit v1.2.3