From 65e4345c8ef8811bbb4860fe5f2df10646b7f2e1 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 30 Dec 2016 23:54:18 +0100 Subject: iio: accel: st_accel: fix LIS3LV02 reading and scaling The LIS3LV02 has a special bit that need to be set to get the read values left aligned. Before this patch we get gibberish like this: iio_generic_buffer -a -c10 -n lis3lv02dl_accel (...) 0.000000 -0.010042 -0.642688 19155832931907 0.000000 -0.010042 -0.642688 19155858751073 Which is because we read a raw value for 1g as 64 which is the nominal 1024 for 1g shifted 4 bits to the left by being right-aligned rather than left aligned. Since all other sensors are left aligned, add some code to set the special DAS (data alignment setting) bit to 1 so that the right value is now read like this: iio_generic_buffer -a -c10 -n lis3lv02dl_accel (...) 0.000000 -0.147095 -10.120135 24761614364956 -0.029419 -0.176514 -10.120135 24761631624540 The scaling was weird as well: we have a gain of 1000 for 1g and 3000 for 6g. I don't even remember how I came up with the old values but they are wrong. Fixes: 3acddf74f807 ("iio: st-sensors: add support for lis3lv02d accelerometer") Cc: Lorenzo Bianconi Cc: Giuseppe Barba Cc: Denis Ciocca Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron --- drivers/iio/common/st_sensors/st_sensors_core.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/iio/common') diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index d5cf7f31eaf9..79c8c7cd70d5 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -401,6 +401,15 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev, return err; } + /* set DAS */ + if (sdata->sensor_settings->das.addr) { + err = st_sensors_write_data_with_mask(indio_dev, + sdata->sensor_settings->das.addr, + sdata->sensor_settings->das.mask, 1); + if (err < 0) + return err; + } + if (sdata->int_pin_open_drain) { dev_info(&indio_dev->dev, "set interrupt line to open drain mode\n"); -- cgit v1.2.3