From cf5b1385d748b2f91b0c05bb301fcaf9bdbad385 Mon Sep 17 00:00:00 2001 From: Slaveyko Slaveykov Date: Wed, 16 Dec 2020 13:57:20 +0200 Subject: drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c After an I2C reset command, the mlx90632 needs some time before responding to other I2C commands. Without that delay, there is a chance that the I2C command(s) after the reset will not be accepted. Signed-off-by: Slaveyko Slaveykov Reviewed-by: Andy Shevchenko Reviewed-by: Crt Mori Fixes: e02472f74a81 ("iio:temperature:mlx90632: Adding extended calibration option") Link: https://lore.kernel.org/r/20201216115720.12404-2-sis@melexis.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/temperature/mlx90632.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/iio') diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c index 503fe54a0bb9..608ccb1d8bc8 100644 --- a/drivers/iio/temperature/mlx90632.c +++ b/drivers/iio/temperature/mlx90632.c @@ -248,6 +248,12 @@ static int mlx90632_set_meas_type(struct regmap *regmap, u8 type) if (ret < 0) return ret; + /* + * Give the mlx90632 some time to reset properly before sending a new I2C command + * if this is not done, the following I2C command(s) will not be accepted. + */ + usleep_range(150, 200); + ret = regmap_write_bits(regmap, MLX90632_REG_CONTROL, (MLX90632_CFG_MTYP_MASK | MLX90632_CFG_PWR_MASK), (MLX90632_MTYP_STATUS(type) | MLX90632_PWR_STATUS_HALT)); -- cgit v1.2.3