From bc95df78c4566327086d44f1bfab984a70dc4d6b Mon Sep 17 00:00:00 2001 From: Rajeev Kumar Date: Fri, 19 Nov 2010 12:41:19 -0800 Subject: Input: add support for keyboards on ST SPEAr platform Signed-off-by: Rajeev Kumar Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 9 + drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/spear-keyboard.c | 344 ++++++++++++++++++++++++++++++++ 3 files changed, 354 insertions(+) create mode 100644 drivers/input/keyboard/spear-keyboard.c (limited to 'drivers/input/keyboard') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index b8c51b9781db..ee85e5bf4b2a 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -443,6 +443,15 @@ config KEYBOARD_OMAP4 To compile this driver as a module, choose M here: the module will be called omap4-keypad. +config KEYBOARD_SPEAR + tristate "ST SPEAR keyboard support" + depends on PLAT_SPEAR + help + Say Y here if you want to use the SPEAR keyboard. + + To compile this driver as a module, choose M here: the + module will be called spear-keboard. + config KEYBOARD_TNETV107X tristate "TI TNETV107X keypad support" depends on ARCH_DAVINCI_TNETV107X diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index a34452e8ebe2..8449c730892c 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o +obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c new file mode 100644 index 000000000000..bee03d64c453 --- /dev/null +++ b/drivers/input/keyboard/spear-keyboard.c @@ -0,0 +1,344 @@ +/* + * SPEAr Keyboard Driver + * Based on omap-keypad driver + * + * Copyright (C) 2010 ST Microelectronics + * Rajeev Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Keyboard Registers */ +#define MODE_REG 0x00 /* 16 bit reg */ +#define STATUS_REG 0x0C /* 2 bit reg */ +#define DATA_REG 0x10 /* 8 bit reg */ +#define INTR_MASK 0x54 + +/* Register Values */ +/* + * pclk freq mask = (APB FEQ -1)= 82 MHZ.Programme bit 15-9 in mode + * control register as 1010010(82MHZ) + */ +#define PCLK_FREQ_MSK 0xA400 /* 82 MHz */ +#define START_SCAN 0x0100 +#define SCAN_RATE_10 0x0000 +#define SCAN_RATE_20 0x0004 +#define SCAN_RATE_40 0x0008 +#define SCAN_RATE_80 0x000C +#define MODE_KEYBOARD 0x0002 +#define DATA_AVAIL 0x2 + +#define KEY_MASK 0xFF000000 +#define KEY_VALUE 0x00FFFFFF +#define ROW_MASK 0xF0 +#define COLUMN_MASK 0x0F +#define ROW_SHIFT 4 + +struct spear_kbd { + struct input_dev *input; + struct resource *res; + void __iomem *io_base; + struct clk *clk; + unsigned int irq; + unsigned short last_key; + unsigned short keycodes[256]; +}; + +static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id) +{ + struct spear_kbd *kbd = dev_id; + struct input_dev *input = kbd->input; + unsigned int key; + u8 sts, val; + + sts = readb(kbd->io_base + STATUS_REG); + if (sts & DATA_AVAIL) + return IRQ_NONE; + + if (kbd->last_key != KEY_RESERVED) { + input_report_key(input, kbd->last_key, 0); + kbd->last_key = KEY_RESERVED; + } + + /* following reads active (row, col) pair */ + val = readb(kbd->io_base + DATA_REG); + key = kbd->keycodes[val]; + + input_event(input, EV_MSC, MSC_SCAN, val); + input_report_key(input, key, 1); + input_sync(input); + + kbd->last_key = key; + + /* clear interrupt */ + writeb(0, kbd->io_base + STATUS_REG); + + return IRQ_HANDLED; +} + +static int spear_kbd_open(struct input_dev *dev) +{ + struct spear_kbd *kbd = input_get_drvdata(dev); + int error; + u16 val; + + kbd->last_key = KEY_RESERVED; + + error = clk_enable(kbd->clk); + if (error) + return error; + + /* program keyboard */ + val = SCAN_RATE_80 | MODE_KEYBOARD | PCLK_FREQ_MSK; + writew(val, kbd->io_base + MODE_REG); + writeb(1, kbd->io_base + STATUS_REG); + + /* start key scan */ + val = readw(kbd->io_base + MODE_REG); + val |= START_SCAN; + writew(val, kbd->io_base + MODE_REG); + + return 0; +} + +static void spear_kbd_close(struct input_dev *dev) +{ + struct spear_kbd *kbd = input_get_drvdata(dev); + u16 val; + + /* stop key scan */ + val = readw(kbd->io_base + MODE_REG); + val &= ~START_SCAN; + writew(val, kbd->io_base + MODE_REG); + + clk_disable(kbd->clk); + + kbd->last_key = KEY_RESERVED; +} + +static int __devinit spear_kbd_probe(struct platform_device *pdev) +{ + const struct kbd_platform_data *pdata = pdev->dev.platform_data; + const struct matrix_keymap_data *keymap; + struct spear_kbd *kbd; + struct input_dev *input_dev; + struct resource *res; + int irq; + int error; + + if (!pdata) { + dev_err(&pdev->dev, "Invalid platform data\n"); + return -EINVAL; + } + + keymap = pdata->keymap; + if (!keymap) { + dev_err(&pdev->dev, "no keymap defined\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no keyboard resource defined\n"); + return -EBUSY; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "not able to get irq for the device\n"); + return irq; + } + + kbd = kzalloc(sizeof(*kbd), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!kbd || !input_dev) { + dev_err(&pdev->dev, "out of memory\n"); + error = -ENOMEM; + goto err_free_mem; + } + + kbd->input = input_dev; + kbd->irq = irq; + kbd->res = request_mem_region(res->start, resource_size(res), + pdev->name); + if (!kbd->res) { + dev_err(&pdev->dev, "keyboard region already claimed\n"); + error = -EBUSY; + goto err_free_mem; + } + + kbd->io_base = ioremap(res->start, resource_size(res)); + if (!kbd->io_base) { + dev_err(&pdev->dev, "ioremap failed for kbd_region\n"); + error = -ENOMEM; + goto err_release_mem_region; + } + + kbd->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(kbd->clk)) { + error = PTR_ERR(kbd->clk); + goto err_iounmap; + } + + input_dev->name = "Spear Keyboard"; + input_dev->phys = "keyboard/input0"; + input_dev->dev.parent = &pdev->dev; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->open = spear_kbd_open; + input_dev->close = spear_kbd_close; + + __set_bit(EV_KEY, input_dev->evbit); + if (pdata->rep) + __set_bit(EV_REP, input_dev->evbit); + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + + input_dev->keycode = kbd->keycodes; + input_dev->keycodesize = sizeof(kbd->keycodes[0]); + input_dev->keycodemax = ARRAY_SIZE(kbd->keycodes); + + matrix_keypad_build_keymap(keymap, ROW_SHIFT, + input_dev->keycode, input_dev->keybit); + + input_set_drvdata(input_dev, kbd); + + error = request_irq(irq, spear_kbd_interrupt, 0, "keyboard", kbd); + if (error) { + dev_err(&pdev->dev, "request_irq fail\n"); + goto err_put_clk; + } + + error = input_register_device(input_dev); + if (error) { + dev_err(&pdev->dev, "Unable to register keyboard device\n"); + goto err_free_irq; + } + + device_init_wakeup(&pdev->dev, 1); + platform_set_drvdata(pdev, kbd); + + return 0; + +err_free_irq: + free_irq(kbd->irq, kbd); +err_put_clk: + clk_put(kbd->clk); +err_iounmap: + iounmap(kbd->io_base); +err_release_mem_region: + release_mem_region(res->start, resource_size(res)); +err_free_mem: + input_free_device(input_dev); + kfree(kbd); + + return error; +} + +static int __devexit spear_kbd_remove(struct platform_device *pdev) +{ + struct spear_kbd *kbd = platform_get_drvdata(pdev); + + free_irq(kbd->irq, kbd); + input_unregister_device(kbd->input); + clk_put(kbd->clk); + iounmap(kbd->io_base); + release_mem_region(kbd->res->start, resource_size(kbd->res)); + kfree(kbd); + + device_init_wakeup(&pdev->dev, 1); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int spear_kbd_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct spear_kbd *kbd = platform_get_drvdata(pdev); + struct input_dev *input_dev = kbd->input; + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + clk_enable(kbd->clk); + + if (device_may_wakeup(&pdev->dev)) + enable_irq_wake(kbd->irq); + + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static int spear_kbd_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct spear_kbd *kbd = platform_get_drvdata(pdev); + struct input_dev *input_dev = kbd->input; + + mutex_lock(&input_dev->mutex); + + if (device_may_wakeup(&pdev->dev)) + disable_irq_wake(kbd->irq); + + if (input_dev->users) + clk_enable(kbd->clk); + + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static const struct dev_pm_ops spear_kbd_pm_ops = { + .suspend = spear_kbd_suspend, + .resume = spear_kbd_resume, +}; +#endif + +static struct platform_driver spear_kbd_driver = { + .probe = spear_kbd_probe, + .remove = __devexit_p(spear_kbd_remove), + .driver = { + .name = "keyboard", + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &spear_kbd_pm_ops, +#endif + }, +}; + +static int __init spear_kbd_init(void) +{ + return platform_driver_register(&spear_kbd_driver); +} +module_init(spear_kbd_init); + +static void __exit spear_kbd_exit(void) +{ + platform_driver_unregister(&spear_kbd_driver); +} +module_exit(spear_kbd_exit); + +MODULE_AUTHOR("Rajeev Kumar"); +MODULE_DESCRIPTION("SPEAr Keyboard Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From b8a3d6bcbc85d7636d9f2adede8479ce2999c232 Mon Sep 17 00:00:00 2001 From: Tony SIM Date: Tue, 7 Dec 2010 02:54:00 -0800 Subject: Input: tca6416-keypad - add support for tca6408a Support 8-bit tca6408a I/O expander as a keypad. Signed-off-by: Tony SIM Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 10 ++++++---- drivers/input/keyboard/tca6416-keypad.c | 13 ++++++++++--- 2 files changed, 16 insertions(+), 7 deletions(-) (limited to 'drivers/input/keyboard') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index ee85e5bf4b2a..a378e959368e 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -180,20 +180,22 @@ config KEYBOARD_GPIO module will be called gpio_keys. config KEYBOARD_TCA6416 - tristate "TCA6416 Keypad Support" + tristate "TCA6416/TCA6408A Keypad Support" depends on I2C help This driver implements basic keypad functionality - for keys connected through TCA6416 IO expander + for keys connected through TCA6416/TCA6408A IO expanders. Say Y here if your device has keys connected to - TCA6416 IO expander. Your board-specific setup logic + TCA6416/TCA6408A IO expander. Your board-specific setup logic must also provide pin-mask details(of which TCA6416 pins are used for keypad). - If enabled the complete TCA6416 device will be managed through + If enabled the entire TCA6416 device will be managed through this driver. + To compile this driver as a module, choose M here: the + module will be called tca6416_keypad. config KEYBOARD_MATRIX tristate "GPIO driven matrix keypad support" diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c index 00137bebcf97..800fbccf1f0f 100644 --- a/drivers/input/keyboard/tca6416-keypad.c +++ b/drivers/input/keyboard/tca6416-keypad.c @@ -29,6 +29,7 @@ static const struct i2c_device_id tca6416_id[] = { { "tca6416-keys", 16, }, + { "tca6408-keys", 8, }, { } }; MODULE_DEVICE_TABLE(i2c, tca6416_id); @@ -46,8 +47,9 @@ struct tca6416_keypad_chip { struct i2c_client *client; struct input_dev *input; struct delayed_work dwork; - u16 pinmask; + int io_size; int irqnum; + u16 pinmask; bool use_polling; struct tca6416_button buttons[0]; }; @@ -56,7 +58,9 @@ static int tca6416_write_reg(struct tca6416_keypad_chip *chip, int reg, u16 val) { int error; - error = i2c_smbus_write_word_data(chip->client, reg << 1, val); + error = chip->io_size > 8 ? + i2c_smbus_write_word_data(chip->client, reg << 1, val) : + i2c_smbus_write_byte_data(chip->client, reg, val); if (error < 0) { dev_err(&chip->client->dev, "%s failed, reg: %d, val: %d, error: %d\n", @@ -71,7 +75,9 @@ static int tca6416_read_reg(struct tca6416_keypad_chip *chip, int reg, u16 *val) { int retval; - retval = i2c_smbus_read_word_data(chip->client, reg << 1); + retval = chip->io_size > 8 ? + i2c_smbus_read_word_data(chip->client, reg << 1) : + i2c_smbus_read_byte_data(chip->client, reg); if (retval < 0) { dev_err(&chip->client->dev, "%s failed, reg: %d, error: %d\n", __func__, reg, retval); @@ -224,6 +230,7 @@ static int __devinit tca6416_keypad_probe(struct i2c_client *client, chip->client = client; chip->input = input; + chip->io_size = id->driver_data; chip->pinmask = pdata->pinmask; chip->use_polling = pdata->use_polling; -- cgit v1.2.3