From 948e12f0bd51db439659fed857971e22fbdd7527 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Tue, 6 Sep 2005 15:19:00 -0700 Subject: [PATCH] Corgi Keyboard: Code tidying The input system handles key state tracking so there's no need for the driver to do so as well. Also tidy up some comment formatting and remove a now unneeded function. Signed-off-by: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/input/keyboard/corgikbd.c | 61 ++++++++++++++++++--------------------- 1 file changed, 28 insertions(+), 33 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c index 43d6edb3cf09..767e853dd766 100644 --- a/drivers/input/keyboard/corgikbd.c +++ b/drivers/input/keyboard/corgikbd.c @@ -33,7 +33,6 @@ /* zero code, 124 scancodes + 3 hinge combinations */ #define NR_SCANCODES ( SCANCODE(KB_ROWS-1,KB_COLS-1) +1 +1 +3 ) #define SCAN_INTERVAL (HZ/10) -#define CORGIKBD_PRESSED 1 #define HINGE_SCAN_INTERVAL (HZ/4) @@ -74,9 +73,7 @@ struct corgikbd { struct input_dev input; char phys[32]; - unsigned char state[ARRAY_SIZE(corgikbd_keycode)]; spinlock_t lock; - struct timer_list timer; struct timer_list htimer; @@ -84,22 +81,6 @@ struct corgikbd { unsigned long suspend_jiffies; }; -static void handle_scancode(unsigned int pressed,unsigned int scancode, struct corgikbd *corgikbd_data) -{ - if (pressed && !(corgikbd_data->state[scancode] & CORGIKBD_PRESSED)) { - corgikbd_data->state[scancode] |= CORGIKBD_PRESSED; - input_report_key(&corgikbd_data->input, corgikbd_data->keycode[scancode], 1); - if ((corgikbd_data->keycode[scancode] == CORGI_KEY_OFF) - && time_after(jiffies, corgikbd_data->suspend_jiffies + HZ)) { - input_event(&corgikbd_data->input, EV_PWR, CORGI_KEY_OFF, 1); - corgikbd_data->suspend_jiffies=jiffies; - } - } else if (!pressed && corgikbd_data->state[scancode] & CORGIKBD_PRESSED) { - corgikbd_data->state[scancode] &= ~CORGIKBD_PRESSED; - input_report_key(&corgikbd_data->input, corgikbd_data->keycode[scancode], 0); - } -} - #define KB_DISCHARGE_DELAY 10 #define KB_ACTIVATE_DELAY 10 @@ -112,36 +93,36 @@ static void handle_scancode(unsigned int pressed,unsigned int scancode, struct c */ static inline void corgikbd_discharge_all(void) { - // STROBE All HiZ + /* STROBE All HiZ */ GPCR2 = CORGI_GPIO_ALL_STROBE_BIT; GPDR2 &= ~CORGI_GPIO_ALL_STROBE_BIT; } static inline void corgikbd_activate_all(void) { - // STROBE ALL -> High + /* STROBE ALL -> High */ GPSR2 = CORGI_GPIO_ALL_STROBE_BIT; GPDR2 |= CORGI_GPIO_ALL_STROBE_BIT; udelay(KB_DISCHARGE_DELAY); - // Clear any interrupts we may have triggered when altering the GPIO lines + /* Clear any interrupts we may have triggered when altering the GPIO lines */ GEDR1 = CORGI_GPIO_HIGH_SENSE_BIT; GEDR2 = CORGI_GPIO_LOW_SENSE_BIT; } static inline void corgikbd_activate_col(int col) { - // STROBE col -> High, not col -> HiZ + /* STROBE col -> High, not col -> HiZ */ GPSR2 = CORGI_GPIO_STROBE_BIT(col); GPDR2 = (GPDR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(col); } static inline void corgikbd_reset_col(int col) { - // STROBE col -> Low + /* STROBE col -> Low */ GPCR2 = CORGI_GPIO_STROBE_BIT(col); - // STROBE col -> out, not col -> HiZ + /* STROBE col -> out, not col -> HiZ */ GPDR2 = (GPDR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(col); } @@ -156,7 +137,7 @@ static inline void corgikbd_reset_col(int col) /* Scan the hardware keyboard and push any changes up through the input layer */ static void corgikbd_scankeyboard(struct corgikbd *corgikbd_data, struct pt_regs *regs) { - unsigned int row, col, rowd, scancode; + unsigned int row, col, rowd; unsigned long flags; unsigned int num_pressed; @@ -183,10 +164,21 @@ static void corgikbd_scankeyboard(struct corgikbd *corgikbd_data, struct pt_regs rowd = GET_ROWS_STATUS(col); for (row = 0; row < KB_ROWS; row++) { + unsigned int scancode, pressed; + scancode = SCANCODE(row, col); - handle_scancode((rowd & KB_ROWMASK(row)), scancode, corgikbd_data); - if (rowd & KB_ROWMASK(row)) + pressed = rowd & KB_ROWMASK(row); + + input_report_key(&corgikbd_data->input, corgikbd_data->keycode[scancode], pressed); + + if (pressed) num_pressed++; + + if (pressed && (corgikbd_data->keycode[scancode] == CORGI_KEY_OFF) + && time_after(jiffies, corgikbd_data->suspend_jiffies + HZ)) { + input_event(&corgikbd_data->input, EV_PWR, CORGI_KEY_OFF, 1); + corgikbd_data->suspend_jiffies=jiffies; + } } corgikbd_reset_col(col); } @@ -231,8 +223,11 @@ static void corgikbd_timer_callback(unsigned long data) * The hinge switches generate no interrupt so they need to be * monitored by a timer. * - * When we detect changes, we debounce it and then pass the three - * positions the system can take as keypresses to the input system. + * We debounce the switches and pass them to the input system. + * + * gprr == 0x00 - Keyboard with Landscape Screen + * 0x08 - No Keyboard with Portrait Screen + * 0x0c - Keyboard and Screen Closed */ #define HINGE_STABLE_COUNT 2 @@ -254,9 +249,9 @@ static void corgikbd_hinge_timer(unsigned long data) if (hinge_count >= HINGE_STABLE_COUNT) { spin_lock_irqsave(&corgikbd_data->lock, flags); - handle_scancode((sharpsl_hinge_state == 0x00), 125, corgikbd_data); /* Keyboard with Landscape Screen */ - handle_scancode((sharpsl_hinge_state == 0x08), 126, corgikbd_data); /* No Keyboard with Portrait Screen */ - handle_scancode((sharpsl_hinge_state == 0x0c), 127, corgikbd_data); /* Keyboard and Screen Closed */ + input_report_key(&corgikbd_data->input, corgikbd_data->keycode[125], (sharpsl_hinge_state == 0x00)); + input_report_key(&corgikbd_data->input, corgikbd_data->keycode[126], (sharpsl_hinge_state == 0x08)); + input_report_key(&corgikbd_data->input, corgikbd_data->keycode[127], (sharpsl_hinge_state == 0x0c)); input_sync(&corgikbd_data->input); spin_unlock_irqrestore(&corgikbd_data->lock, flags); -- cgit v1.2.3