From 443580486e3b96578928c1c91e8fbdcf0c9c9c7f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 18 Feb 2013 23:28:34 +0900 Subject: irqchip: Renesas INTC External IRQ pin driver This patch adds a driver for external IRQ pins connected to the INTC block on recent SoCs from Renesas. The INTC hardware block usually contains a rather wide range of features ranging from external IRQ pin handling to legacy interrupt controller support. On older SoCs the INTC is used as a general purpose interrupt controller both for external IRQ pins and on-chip devices. On more recent ARM based SoCs with Cortex-A9 the main interrupt controller is the GIC, but IRQ trigger setup still need to happen in the INTC hardware block. This driver implements the glue code needed to configure IRQ trigger and also handle mask/unmask and demux of external IRQ pins hooked up from the INTC to the GIC. Tested on sh73a0 and r8a7779. The hardware varies quite a bit with SoC model, for instance register width and bitfield widths vary wildly. The driver requires one GIC SPI per external IRQ pin to operate. Each driver instance will handle up to 8 external IRQ pins. The SoCs using this driver are currently mainly used together with regular platform devices so this driver allows configuration via platform data to support things like static interrupt base address. DT support will be added incrementally in the not so distant future. Signed-off-by: Magnus Damm Acked-by: Thomas Gleixner Signed-off-by: Simon Horman --- drivers/irqchip/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/irqchip/Makefile') diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 98e3b87bdf1b..1aaa4073ab60 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -8,4 +8,5 @@ obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi.o obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o obj-$(CONFIG_ARM_GIC) += irq-gic.o obj-$(CONFIG_ARM_VIC) += irq-vic.o +obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o -- cgit v1.2.3 From fbc83b7f59dd8ed1154286b6de00b6d03c24a3c4 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 27 Feb 2013 17:15:01 +0900 Subject: irqchip: Renesas IRQC driver This patch adds a driver for external IRQ pins connected to the IRQC hardware block on recent SoCs from Renesas. The IRQC hardware block is used together with more recent ARM based SoCs using the GIC. As usual the GIC requires external IRQ trigger setup somewhere else which in this particular case happens to be IRQC. This driver implements the glue code needed to configure IRQ trigger and also handle mask/unmask and demux of external IRQ pins hooked up from the IRQC to the GIC. Tested on r8a73a4 but is designed to work with a wide range of SoCs. The driver requires one GIC SPI per external IRQ pin to operate. Each driver instance will handle up to 32 external IRQ pins. The SoCs using this driver are currently mainly used together with regular platform devices so this driver allows configuration via platform data to support things like static interrupt base address. DT support will be added incrementally in the not so distant future. Signed-off-by: Magnus Damm Tested-by: Guennadi Liakhovetski Signed-off-by: Simon Horman --- drivers/irqchip/Kconfig | 4 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-renesas-irqc.c | 298 +++++++++++++++++++++++++ include/linux/platform_data/irq-renesas-irqc.h | 27 +++ 4 files changed, 330 insertions(+) create mode 100644 drivers/irqchip/irq-renesas-irqc.c create mode 100644 include/linux/platform_data/irq-renesas-irqc.h (limited to 'drivers/irqchip/Makefile') diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index 0f5f1c3825bc..4a33351c25dc 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -29,6 +29,10 @@ config RENESAS_INTC_IRQPIN bool select IRQ_DOMAIN +config RENESAS_IRQC + bool + select IRQ_DOMAIN + config VERSATILE_FPGA_IRQ bool select IRQ_DOMAIN diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 1aaa4073ab60..e41ceb9bec22 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -9,4 +9,5 @@ obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o obj-$(CONFIG_ARM_GIC) += irq-gic.o obj-$(CONFIG_ARM_VIC) += irq-vic.o obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o +obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o diff --git a/drivers/irqchip/irq-renesas-irqc.c b/drivers/irqchip/irq-renesas-irqc.c new file mode 100644 index 000000000000..95d69bfac982 --- /dev/null +++ b/drivers/irqchip/irq-renesas-irqc.c @@ -0,0 +1,298 @@ +/* + * Renesas IRQC Driver + * + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define IRQC_IRQ_MAX 32 /* maximum 32 interrupts per driver instance */ + +#define IRQC_REQ_STS 0x00 +#define IRQC_EN_STS 0x04 +#define IRQC_EN_SET 0x08 +#define IRQC_INT_CPU_BASE(n) (0x000 + ((n) * 0x10)) +#define DETECT_STATUS 0x100 +#define IRQC_CONFIG(n) (0x180 + ((n) * 0x04)) + +struct irqc_irq { + int hw_irq; + int requested_irq; + int domain_irq; + struct irqc_priv *p; +}; + +struct irqc_priv { + void __iomem *iomem; + void __iomem *cpu_int_base; + struct irqc_irq irq[IRQC_IRQ_MAX]; + struct renesas_irqc_config config; + unsigned int number_of_irqs; + struct platform_device *pdev; + struct irq_chip irq_chip; + struct irq_domain *irq_domain; +}; + +static void irqc_dbg(struct irqc_irq *i, char *str) +{ + dev_dbg(&i->p->pdev->dev, "%s (%d:%d:%d)\n", + str, i->requested_irq, i->hw_irq, i->domain_irq); +} + +static void irqc_irq_enable(struct irq_data *d) +{ + struct irqc_priv *p = irq_data_get_irq_chip_data(d); + int hw_irq = irqd_to_hwirq(d); + + irqc_dbg(&p->irq[hw_irq], "enable"); + iowrite32(BIT(hw_irq), p->cpu_int_base + IRQC_EN_SET); +} + +static void irqc_irq_disable(struct irq_data *d) +{ + struct irqc_priv *p = irq_data_get_irq_chip_data(d); + int hw_irq = irqd_to_hwirq(d); + + irqc_dbg(&p->irq[hw_irq], "disable"); + iowrite32(BIT(hw_irq), p->cpu_int_base + IRQC_EN_STS); +} + +#define INTC_IRQ_SENSE_VALID 0x10 +#define INTC_IRQ_SENSE(x) (x + INTC_IRQ_SENSE_VALID) + +static unsigned char irqc_sense[IRQ_TYPE_SENSE_MASK + 1] = { + [IRQ_TYPE_LEVEL_LOW] = INTC_IRQ_SENSE(0x01), + [IRQ_TYPE_LEVEL_HIGH] = INTC_IRQ_SENSE(0x02), + [IRQ_TYPE_EDGE_FALLING] = INTC_IRQ_SENSE(0x04), /* Synchronous */ + [IRQ_TYPE_EDGE_RISING] = INTC_IRQ_SENSE(0x08), /* Synchronous */ + [IRQ_TYPE_EDGE_BOTH] = INTC_IRQ_SENSE(0x0c), /* Synchronous */ +}; + +static int irqc_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct irqc_priv *p = irq_data_get_irq_chip_data(d); + int hw_irq = irqd_to_hwirq(d); + unsigned char value = irqc_sense[type & IRQ_TYPE_SENSE_MASK]; + unsigned long tmp; + + irqc_dbg(&p->irq[hw_irq], "sense"); + + if (!(value & INTC_IRQ_SENSE_VALID)) + return -EINVAL; + + tmp = ioread32(p->iomem + IRQC_CONFIG(hw_irq)); + tmp &= ~0x3f; + tmp |= value ^ INTC_IRQ_SENSE_VALID; + iowrite32(tmp, p->iomem + IRQC_CONFIG(hw_irq)); + return 0; +} + +static irqreturn_t irqc_irq_handler(int irq, void *dev_id) +{ + struct irqc_irq *i = dev_id; + struct irqc_priv *p = i->p; + unsigned long bit = BIT(i->hw_irq); + + irqc_dbg(i, "demux1"); + + if (ioread32(p->iomem + DETECT_STATUS) & bit) { + iowrite32(bit, p->iomem + DETECT_STATUS); + irqc_dbg(i, "demux2"); + generic_handle_irq(i->domain_irq); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static int irqc_irq_domain_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct irqc_priv *p = h->host_data; + + p->irq[hw].domain_irq = virq; + p->irq[hw].hw_irq = hw; + + irqc_dbg(&p->irq[hw], "map"); + irq_set_chip_data(virq, h->host_data); + irq_set_chip_and_handler(virq, &p->irq_chip, handle_level_irq); + set_irq_flags(virq, IRQF_VALID); /* kill me now */ + return 0; +} + +static struct irq_domain_ops irqc_irq_domain_ops = { + .map = irqc_irq_domain_map, +}; + +static int irqc_probe(struct platform_device *pdev) +{ + struct renesas_irqc_config *pdata = pdev->dev.platform_data; + struct irqc_priv *p; + struct resource *io; + struct resource *irq; + struct irq_chip *irq_chip; + const char *name = dev_name(&pdev->dev); + int ret; + int k; + + p = kzalloc(sizeof(*p), GFP_KERNEL); + if (!p) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + ret = -ENOMEM; + goto err0; + } + + /* deal with driver instance configuration */ + if (pdata) + memcpy(&p->config, pdata, sizeof(*pdata)); + + p->pdev = pdev; + platform_set_drvdata(pdev, p); + + /* get hold of manadatory IOMEM */ + io = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!io) { + dev_err(&pdev->dev, "not enough IOMEM resources\n"); + ret = -EINVAL; + goto err1; + } + + /* allow any number of IRQs between 1 and IRQC_IRQ_MAX */ + for (k = 0; k < IRQC_IRQ_MAX; k++) { + irq = platform_get_resource(pdev, IORESOURCE_IRQ, k); + if (!irq) + break; + + p->irq[k].p = p; + p->irq[k].requested_irq = irq->start; + } + + p->number_of_irqs = k; + if (p->number_of_irqs < 1) { + dev_err(&pdev->dev, "not enough IRQ resources\n"); + ret = -EINVAL; + goto err1; + } + + /* ioremap IOMEM and setup read/write callbacks */ + p->iomem = ioremap_nocache(io->start, resource_size(io)); + if (!p->iomem) { + dev_err(&pdev->dev, "failed to remap IOMEM\n"); + ret = -ENXIO; + goto err2; + } + + p->cpu_int_base = p->iomem + IRQC_INT_CPU_BASE(0); /* SYS-SPI */ + + irq_chip = &p->irq_chip; + irq_chip->name = name; + irq_chip->irq_mask = irqc_irq_disable; + irq_chip->irq_unmask = irqc_irq_enable; + irq_chip->irq_enable = irqc_irq_enable; + irq_chip->irq_disable = irqc_irq_disable; + irq_chip->irq_set_type = irqc_irq_set_type; + irq_chip->flags = IRQCHIP_SKIP_SET_WAKE; + + p->irq_domain = irq_domain_add_simple(pdev->dev.of_node, + p->number_of_irqs, + p->config.irq_base, + &irqc_irq_domain_ops, p); + if (!p->irq_domain) { + ret = -ENXIO; + dev_err(&pdev->dev, "cannot initialize irq domain\n"); + goto err2; + } + + /* request interrupts one by one */ + for (k = 0; k < p->number_of_irqs; k++) { + if (request_irq(p->irq[k].requested_irq, irqc_irq_handler, + 0, name, &p->irq[k])) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + ret = -ENOENT; + goto err3; + } + } + + dev_info(&pdev->dev, "driving %d irqs\n", p->number_of_irqs); + + /* warn in case of mismatch if irq base is specified */ + if (p->config.irq_base) { + if (p->config.irq_base != p->irq[0].domain_irq) + dev_warn(&pdev->dev, "irq base mismatch (%d/%d)\n", + p->config.irq_base, p->irq[0].domain_irq); + } + + return 0; +err3: + for (; k >= 0; k--) + free_irq(p->irq[k - 1].requested_irq, &p->irq[k - 1]); + + irq_domain_remove(p->irq_domain); +err2: + iounmap(p->iomem); +err1: + kfree(p); +err0: + return ret; +} + +static int irqc_remove(struct platform_device *pdev) +{ + struct irqc_priv *p = platform_get_drvdata(pdev); + int k; + + for (k = 0; k < p->number_of_irqs; k++) + free_irq(p->irq[k].requested_irq, &p->irq[k]); + + irq_domain_remove(p->irq_domain); + iounmap(p->iomem); + kfree(p); + return 0; +} + +static struct platform_driver irqc_device_driver = { + .probe = irqc_probe, + .remove = irqc_remove, + .driver = { + .name = "renesas_irqc", + } +}; + +static int __init irqc_init(void) +{ + return platform_driver_register(&irqc_device_driver); +} +postcore_initcall(irqc_init); + +static void __exit irqc_exit(void) +{ + platform_driver_unregister(&irqc_device_driver); +} +module_exit(irqc_exit); + +MODULE_AUTHOR("Magnus Damm"); +MODULE_DESCRIPTION("Renesas IRQC Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/platform_data/irq-renesas-irqc.h b/include/linux/platform_data/irq-renesas-irqc.h new file mode 100644 index 000000000000..3ae17b3e00ed --- /dev/null +++ b/include/linux/platform_data/irq-renesas-irqc.h @@ -0,0 +1,27 @@ +/* + * Renesas IRQC Driver + * + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __IRQ_RENESAS_IRQC_H__ +#define __IRQ_RENESAS_IRQC_H__ + +struct renesas_irqc_config { + unsigned int irq_base; +}; + +#endif /* __IRQ_RENESAS_IRQC_H__ */ -- cgit v1.2.3 From 8a407835bef6d47dcef9594d8c85900f994fbedf Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 4 Apr 2013 14:53:33 +0900 Subject: ARM: S3C24XX: move irq driver to drivers/irqchip This move is necessary to make use of the irqchip infrastructure for the following devicetree support for s3c24xx architectures. Signed-off-by: Heiko Stuebner Acked-by: Arnd Bergmann Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c24xx/Makefile | 2 +- arch/arm/mach-s3c24xx/irq.c | 1107 ---------------------------------------- drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-s3c24xx.c | 1107 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 1109 insertions(+), 1108 deletions(-) delete mode 100644 arch/arm/mach-s3c24xx/irq.c create mode 100644 drivers/irqchip/irq-s3c24xx.c (limited to 'drivers/irqchip/Makefile') diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index be6e4d0e6f1a..6f46ecfc8396 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -14,7 +14,7 @@ obj- := # core -obj-y += common.o irq.o +obj-y += common.o obj-$(CONFIG_CPU_S3C2410) += s3c2410.o obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c deleted file mode 100644 index 5c9f8b7a1fd6..000000000000 --- a/arch/arm/mach-s3c24xx/irq.c +++ /dev/null @@ -1,1107 +0,0 @@ -/* - * S3C24XX IRQ handling - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks - * Copyright (c) 2012 Heiko Stuebner - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -#include -#include -#include - -#define S3C_IRQTYPE_NONE 0 -#define S3C_IRQTYPE_EINT 1 -#define S3C_IRQTYPE_EDGE 2 -#define S3C_IRQTYPE_LEVEL 3 - -struct s3c_irq_data { - unsigned int type; - unsigned long parent_irq; - - /* data gets filled during init */ - struct s3c_irq_intc *intc; - unsigned long sub_bits; - struct s3c_irq_intc *sub_intc; -}; - -/* - * Sructure holding the controller data - * @reg_pending register holding pending irqs - * @reg_intpnd special register intpnd in main intc - * @reg_mask mask register - * @domain irq_domain of the controller - * @parent parent controller for ext and sub irqs - * @irqs irq-data, always s3c_irq_data[32] - */ -struct s3c_irq_intc { - void __iomem *reg_pending; - void __iomem *reg_intpnd; - void __iomem *reg_mask; - struct irq_domain *domain; - struct s3c_irq_intc *parent; - struct s3c_irq_data *irqs; -}; - -static void s3c_irq_mask(struct irq_data *data) -{ - struct s3c_irq_intc *intc = data->domain->host_data; - struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; - struct s3c_irq_data *parent_data; - unsigned long mask; - unsigned int irqno; - - mask = __raw_readl(intc->reg_mask); - mask |= (1UL << data->hwirq); - __raw_writel(mask, intc->reg_mask); - - if (parent_intc) { - parent_data = &parent_intc->irqs[irq_data->parent_irq]; - - /* check to see if we need to mask the parent IRQ */ - if ((mask & parent_data->sub_bits) == parent_data->sub_bits) { - irqno = irq_find_mapping(parent_intc->domain, - irq_data->parent_irq); - s3c_irq_mask(irq_get_irq_data(irqno)); - } - } -} - -static void s3c_irq_unmask(struct irq_data *data) -{ - struct s3c_irq_intc *intc = data->domain->host_data; - struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; - unsigned long mask; - unsigned int irqno; - - mask = __raw_readl(intc->reg_mask); - mask &= ~(1UL << data->hwirq); - __raw_writel(mask, intc->reg_mask); - - if (parent_intc) { - irqno = irq_find_mapping(parent_intc->domain, - irq_data->parent_irq); - s3c_irq_unmask(irq_get_irq_data(irqno)); - } -} - -static inline void s3c_irq_ack(struct irq_data *data) -{ - struct s3c_irq_intc *intc = data->domain->host_data; - unsigned long bitval = 1UL << data->hwirq; - - __raw_writel(bitval, intc->reg_pending); - if (intc->reg_intpnd) - __raw_writel(bitval, intc->reg_intpnd); -} - -static int s3c_irqext_type_set(void __iomem *gpcon_reg, - void __iomem *extint_reg, - unsigned long gpcon_offset, - unsigned long extint_offset, - unsigned int type) -{ - unsigned long newvalue = 0, value; - - /* Set the GPIO to external interrupt mode */ - value = __raw_readl(gpcon_reg); - value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset); - __raw_writel(value, gpcon_reg); - - /* Set the external interrupt to pointed trigger type */ - switch (type) - { - case IRQ_TYPE_NONE: - pr_warn("No edge setting!\n"); - break; - - case IRQ_TYPE_EDGE_RISING: - newvalue = S3C2410_EXTINT_RISEEDGE; - break; - - case IRQ_TYPE_EDGE_FALLING: - newvalue = S3C2410_EXTINT_FALLEDGE; - break; - - case IRQ_TYPE_EDGE_BOTH: - newvalue = S3C2410_EXTINT_BOTHEDGE; - break; - - case IRQ_TYPE_LEVEL_LOW: - newvalue = S3C2410_EXTINT_LOWLEV; - break; - - case IRQ_TYPE_LEVEL_HIGH: - newvalue = S3C2410_EXTINT_HILEV; - break; - - default: - pr_err("No such irq type %d", type); - return -EINVAL; - } - - value = __raw_readl(extint_reg); - value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset); - __raw_writel(value, extint_reg); - - return 0; -} - -static int s3c_irqext_type(struct irq_data *data, unsigned int type) -{ - void __iomem *extint_reg; - void __iomem *gpcon_reg; - unsigned long gpcon_offset, extint_offset; - - if ((data->hwirq >= 4) && (data->hwirq <= 7)) { - gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C24XX_EXTINT0; - gpcon_offset = (data->hwirq) * 2; - extint_offset = (data->hwirq) * 4; - } else if ((data->hwirq >= 8) && (data->hwirq <= 15)) { - gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C24XX_EXTINT1; - gpcon_offset = (data->hwirq - 8) * 2; - extint_offset = (data->hwirq - 8) * 4; - } else if ((data->hwirq >= 16) && (data->hwirq <= 23)) { - gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C24XX_EXTINT2; - gpcon_offset = (data->hwirq - 8) * 2; - extint_offset = (data->hwirq - 16) * 4; - } else { - return -EINVAL; - } - - return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, - extint_offset, type); -} - -static int s3c_irqext0_type(struct irq_data *data, unsigned int type) -{ - void __iomem *extint_reg; - void __iomem *gpcon_reg; - unsigned long gpcon_offset, extint_offset; - - if ((data->hwirq >= 0) && (data->hwirq <= 3)) { - gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C24XX_EXTINT0; - gpcon_offset = (data->hwirq) * 2; - extint_offset = (data->hwirq) * 4; - } else { - return -EINVAL; - } - - return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, - extint_offset, type); -} - -static struct irq_chip s3c_irq_chip = { - .name = "s3c", - .irq_ack = s3c_irq_ack, - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_set_wake = s3c_irq_wake -}; - -static struct irq_chip s3c_irq_level_chip = { - .name = "s3c-level", - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_ack = s3c_irq_ack, -}; - -static struct irq_chip s3c_irqext_chip = { - .name = "s3c-ext", - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_ack = s3c_irq_ack, - .irq_set_type = s3c_irqext_type, - .irq_set_wake = s3c_irqext_wake -}; - -static struct irq_chip s3c_irq_eint0t4 = { - .name = "s3c-ext0", - .irq_ack = s3c_irq_ack, - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_set_wake = s3c_irq_wake, - .irq_set_type = s3c_irqext0_type, -}; - -static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc) -{ - struct irq_chip *chip = irq_desc_get_chip(desc); - struct s3c_irq_intc *intc = desc->irq_data.domain->host_data; - struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq]; - struct s3c_irq_intc *sub_intc = irq_data->sub_intc; - unsigned long src; - unsigned long msk; - unsigned int n; - - chained_irq_enter(chip, desc); - - src = __raw_readl(sub_intc->reg_pending); - msk = __raw_readl(sub_intc->reg_mask); - - src &= ~msk; - src &= irq_data->sub_bits; - - while (src) { - n = __ffs(src); - src &= ~(1 << n); - generic_handle_irq(irq_find_mapping(sub_intc->domain, n)); - } - - chained_irq_exit(chip, desc); -} - -static struct s3c_irq_intc *main_intc; -static struct s3c_irq_intc *main_intc2; - -static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc, - struct pt_regs *regs) -{ - int pnd; - int offset; - int irq; - - pnd = __raw_readl(intc->reg_intpnd); - if (!pnd) - return false; - - /* We have a problem that the INTOFFSET register does not always - * show one interrupt. Occasionally we get two interrupts through - * the prioritiser, and this causes the INTOFFSET register to show - * what looks like the logical-or of the two interrupt numbers. - * - * Thanks to Klaus, Shannon, et al for helping to debug this problem - */ - offset = __raw_readl(intc->reg_intpnd + 4); - - /* Find the bit manually, when the offset is wrong. - * The pending register only ever contains the one bit of the next - * interrupt to handle. - */ - if (!(pnd & (1 << offset))) - offset = __ffs(pnd); - - irq = irq_find_mapping(intc->domain, offset); - handle_IRQ(irq, regs); - return true; -} - -asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs) -{ - do { - if (likely(main_intc)) - if (s3c24xx_handle_intc(main_intc, regs)) - continue; - - if (main_intc2) - if (s3c24xx_handle_intc(main_intc2, regs)) - continue; - - break; - } while (1); -} - -#ifdef CONFIG_FIQ -/** - * s3c24xx_set_fiq - set the FIQ routing - * @irq: IRQ number to route to FIQ on processor. - * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing. - * - * Change the state of the IRQ to FIQ routing depending on @irq and @on. If - * @on is true, the @irq is checked to see if it can be routed and the - * interrupt controller updated to route the IRQ. If @on is false, the FIQ - * routing is cleared, regardless of which @irq is specified. - */ -int s3c24xx_set_fiq(unsigned int irq, bool on) -{ - u32 intmod; - unsigned offs; - - if (on) { - offs = irq - FIQ_START; - if (offs > 31) - return -EINVAL; - - intmod = 1 << offs; - } else { - intmod = 0; - } - - __raw_writel(intmod, S3C2410_INTMOD); - return 0; -} - -EXPORT_SYMBOL_GPL(s3c24xx_set_fiq); -#endif - -static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - struct s3c_irq_intc *intc = h->host_data; - struct s3c_irq_data *irq_data = &intc->irqs[hw]; - struct s3c_irq_intc *parent_intc; - struct s3c_irq_data *parent_irq_data; - unsigned int irqno; - - /* attach controller pointer to irq_data */ - irq_data->intc = intc; - - parent_intc = intc->parent; - - /* set handler and flags */ - switch (irq_data->type) { - case S3C_IRQTYPE_NONE: - return 0; - case S3C_IRQTYPE_EINT: - /* On the S3C2412, the EINT0to3 have a parent irq - * but need the s3c_irq_eint0t4 chip - */ - if (parent_intc && (!soc_is_s3c2412() || hw >= 4)) - irq_set_chip_and_handler(virq, &s3c_irqext_chip, - handle_edge_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_eint0t4, - handle_edge_irq); - break; - case S3C_IRQTYPE_EDGE: - if (parent_intc || intc->reg_pending == S3C2416_SRCPND2) - irq_set_chip_and_handler(virq, &s3c_irq_level_chip, - handle_edge_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_chip, - handle_edge_irq); - break; - case S3C_IRQTYPE_LEVEL: - if (parent_intc) - irq_set_chip_and_handler(virq, &s3c_irq_level_chip, - handle_level_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_chip, - handle_level_irq); - break; - default: - pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type); - return -EINVAL; - } - set_irq_flags(virq, IRQF_VALID); - - if (parent_intc && irq_data->type != S3C_IRQTYPE_NONE) { - if (irq_data->parent_irq > 31) { - pr_err("irq-s3c24xx: parent irq %lu is out of range\n", - irq_data->parent_irq); - goto err; - } - - parent_irq_data = &parent_intc->irqs[irq_data->parent_irq]; - parent_irq_data->sub_intc = intc; - parent_irq_data->sub_bits |= (1UL << hw); - - /* attach the demuxer to the parent irq */ - irqno = irq_find_mapping(parent_intc->domain, - irq_data->parent_irq); - if (!irqno) { - pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n", - irq_data->parent_irq); - goto err; - } - irq_set_chained_handler(irqno, s3c_irq_demux); - } - - return 0; - -err: - set_irq_flags(virq, 0); - - /* the only error can result from bad mapping data*/ - return -EINVAL; -} - -static struct irq_domain_ops s3c24xx_irq_ops = { - .map = s3c24xx_irq_map, - .xlate = irq_domain_xlate_twocell, -}; - -static void s3c24xx_clear_intc(struct s3c_irq_intc *intc) -{ - void __iomem *reg_source; - unsigned long pend; - unsigned long last; - int i; - - /* if intpnd is set, read the next pending irq from there */ - reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending; - - last = 0; - for (i = 0; i < 4; i++) { - pend = __raw_readl(reg_source); - - if (pend == 0 || pend == last) - break; - - __raw_writel(pend, intc->reg_pending); - if (intc->reg_intpnd) - __raw_writel(pend, intc->reg_intpnd); - - pr_info("irq: clearing pending status %08x\n", (int)pend); - last = pend; - } -} - -static struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, - struct s3c_irq_data *irq_data, - struct s3c_irq_intc *parent, - unsigned long address) -{ - struct s3c_irq_intc *intc; - void __iomem *base = (void *)0xf6000000; /* static mapping */ - int irq_num; - int irq_start; - int ret; - - intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL); - if (!intc) - return ERR_PTR(-ENOMEM); - - intc->irqs = irq_data; - - if (parent) - intc->parent = parent; - - /* select the correct data for the controller. - * Need to hard code the irq num start and offset - * to preserve the static mapping for now - */ - switch (address) { - case 0x4a000000: - pr_debug("irq: found main intc\n"); - intc->reg_pending = base; - intc->reg_mask = base + 0x08; - intc->reg_intpnd = base + 0x10; - irq_num = 32; - irq_start = S3C2410_IRQ(0); - break; - case 0x4a000018: - pr_debug("irq: found subintc\n"); - intc->reg_pending = base + 0x18; - intc->reg_mask = base + 0x1c; - irq_num = 29; - irq_start = S3C2410_IRQSUB(0); - break; - case 0x4a000040: - pr_debug("irq: found intc2\n"); - intc->reg_pending = base + 0x40; - intc->reg_mask = base + 0x48; - intc->reg_intpnd = base + 0x50; - irq_num = 8; - irq_start = S3C2416_IRQ(0); - break; - case 0x560000a4: - pr_debug("irq: found eintc\n"); - base = (void *)0xfd000000; - - intc->reg_mask = base + 0xa4; - intc->reg_pending = base + 0x08; - irq_num = 24; - irq_start = S3C2410_IRQ(32); - break; - default: - pr_err("irq: unsupported controller address\n"); - ret = -EINVAL; - goto err; - } - - /* now that all the data is complete, init the irq-domain */ - s3c24xx_clear_intc(intc); - intc->domain = irq_domain_add_legacy(np, irq_num, irq_start, - 0, &s3c24xx_irq_ops, - intc); - if (!intc->domain) { - pr_err("irq: could not create irq-domain\n"); - ret = -EINVAL; - goto err; - } - - if (address == 0x4a000000) - main_intc = intc; - else if (address == 0x4a000040) - main_intc2 = intc; - - set_handle_irq(s3c24xx_handle_irq); - - return intc; - -err: - kfree(intc); - return ERR_PTR(ret); -} - -static struct s3c_irq_data init_eint[32] = { - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ -}; - -#ifdef CONFIG_CPU_S3C2410 -static struct s3c_irq_data init_s3c2410base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_s3c2410subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ -}; - -void __init s3c2410_init_irq(void) -{ - struct s3c_irq_intc *main_intc; - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - main_intc = s3c24xx_init_intc(NULL, &init_s3c2410base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_s3c2410subint[0], main_intc, 0x4a000018); - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); -} -#endif - -#ifdef CONFIG_CPU_S3C2412 -static struct s3c_irq_data init_s3c2412base[32] = { - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT1 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT2 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* SDI/CF */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_s3c2412eint[32] = { - { .type = S3C_IRQTYPE_EINT, .parent_irq = 0 }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 1 }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 2 }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 3 }, /* EINT3 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ -}; - -static struct s3c_irq_data init_s3c2412subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_NONE, }, - { .type = S3C_IRQTYPE_NONE, }, - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* SDI */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* CF */ -}; - -void s3c2412_init_irq(void) -{ - struct s3c_irq_intc *main_intc; - - pr_info("S3C2412: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - main_intc = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_s3c2412eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2412subint[0], main_intc, 0x4a000018); -} -#endif - -#ifdef CONFIG_CPU_S3C2416 -static struct s3c_irq_data init_s3c2416base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ - { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_NONE, }, - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_s3c2416subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ -}; - -static struct s3c_irq_data init_s3c2416_second[32] = { - { .type = S3C_IRQTYPE_EDGE }, /* 2D */ - { .type = S3C_IRQTYPE_EDGE }, /* IIC1 */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE }, /* PCM0 */ - { .type = S3C_IRQTYPE_EDGE }, /* PCM1 */ - { .type = S3C_IRQTYPE_EDGE }, /* I2S0 */ - { .type = S3C_IRQTYPE_EDGE }, /* I2S1 */ -}; - -void __init s3c2416_init_irq(void) -{ - struct s3c_irq_intc *main_intc; - - pr_info("S3C2416: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018); - - s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040); -} - -#endif - -#ifdef CONFIG_CPU_S3C2440 -static struct s3c_irq_data init_s3c2440base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_s3c2440subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ -}; - -void __init s3c2440_init_irq(void) -{ - struct s3c_irq_intc *main_intc; - - pr_info("S3C2440: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - main_intc = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2440subint[0], main_intc, 0x4a000018); -} -#endif - -#ifdef CONFIG_CPU_S3C2442 -static struct s3c_irq_data init_s3c2442base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_s3c2442subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */ -}; - -void __init s3c2442_init_irq(void) -{ - struct s3c_irq_intc *main_intc; - - pr_info("S3C2442: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - main_intc = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2442subint[0], main_intc, 0x4a000018); -} -#endif - -#ifdef CONFIG_CPU_S3C2443 -static struct s3c_irq_data init_s3c2443base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ - { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* CFON */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - - -static struct s3c_irq_data init_s3c2443subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ -}; - -void __init s3c2443_init_irq(void) -{ - struct s3c_irq_intc *main_intc; - - pr_info("S3C2443: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018); -} -#endif diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 98e3b87bdf1b..4d65a21eb9b8 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_IRQCHIP) += irqchip.o obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o +obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o obj-$(CONFIG_METAG) += irq-metag-ext.o obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi.o diff --git a/drivers/irqchip/irq-s3c24xx.c b/drivers/irqchip/irq-s3c24xx.c new file mode 100644 index 000000000000..5c9f8b7a1fd6 --- /dev/null +++ b/drivers/irqchip/irq-s3c24xx.c @@ -0,0 +1,1107 @@ +/* + * S3C24XX IRQ handling + * + * Copyright (c) 2003-2004 Simtec Electronics + * Ben Dooks + * Copyright (c) 2012 Heiko Stuebner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include +#include +#include + +#define S3C_IRQTYPE_NONE 0 +#define S3C_IRQTYPE_EINT 1 +#define S3C_IRQTYPE_EDGE 2 +#define S3C_IRQTYPE_LEVEL 3 + +struct s3c_irq_data { + unsigned int type; + unsigned long parent_irq; + + /* data gets filled during init */ + struct s3c_irq_intc *intc; + unsigned long sub_bits; + struct s3c_irq_intc *sub_intc; +}; + +/* + * Sructure holding the controller data + * @reg_pending register holding pending irqs + * @reg_intpnd special register intpnd in main intc + * @reg_mask mask register + * @domain irq_domain of the controller + * @parent parent controller for ext and sub irqs + * @irqs irq-data, always s3c_irq_data[32] + */ +struct s3c_irq_intc { + void __iomem *reg_pending; + void __iomem *reg_intpnd; + void __iomem *reg_mask; + struct irq_domain *domain; + struct s3c_irq_intc *parent; + struct s3c_irq_data *irqs; +}; + +static void s3c_irq_mask(struct irq_data *data) +{ + struct s3c_irq_intc *intc = data->domain->host_data; + struct s3c_irq_intc *parent_intc = intc->parent; + struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; + struct s3c_irq_data *parent_data; + unsigned long mask; + unsigned int irqno; + + mask = __raw_readl(intc->reg_mask); + mask |= (1UL << data->hwirq); + __raw_writel(mask, intc->reg_mask); + + if (parent_intc) { + parent_data = &parent_intc->irqs[irq_data->parent_irq]; + + /* check to see if we need to mask the parent IRQ */ + if ((mask & parent_data->sub_bits) == parent_data->sub_bits) { + irqno = irq_find_mapping(parent_intc->domain, + irq_data->parent_irq); + s3c_irq_mask(irq_get_irq_data(irqno)); + } + } +} + +static void s3c_irq_unmask(struct irq_data *data) +{ + struct s3c_irq_intc *intc = data->domain->host_data; + struct s3c_irq_intc *parent_intc = intc->parent; + struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; + unsigned long mask; + unsigned int irqno; + + mask = __raw_readl(intc->reg_mask); + mask &= ~(1UL << data->hwirq); + __raw_writel(mask, intc->reg_mask); + + if (parent_intc) { + irqno = irq_find_mapping(parent_intc->domain, + irq_data->parent_irq); + s3c_irq_unmask(irq_get_irq_data(irqno)); + } +} + +static inline void s3c_irq_ack(struct irq_data *data) +{ + struct s3c_irq_intc *intc = data->domain->host_data; + unsigned long bitval = 1UL << data->hwirq; + + __raw_writel(bitval, intc->reg_pending); + if (intc->reg_intpnd) + __raw_writel(bitval, intc->reg_intpnd); +} + +static int s3c_irqext_type_set(void __iomem *gpcon_reg, + void __iomem *extint_reg, + unsigned long gpcon_offset, + unsigned long extint_offset, + unsigned int type) +{ + unsigned long newvalue = 0, value; + + /* Set the GPIO to external interrupt mode */ + value = __raw_readl(gpcon_reg); + value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset); + __raw_writel(value, gpcon_reg); + + /* Set the external interrupt to pointed trigger type */ + switch (type) + { + case IRQ_TYPE_NONE: + pr_warn("No edge setting!\n"); + break; + + case IRQ_TYPE_EDGE_RISING: + newvalue = S3C2410_EXTINT_RISEEDGE; + break; + + case IRQ_TYPE_EDGE_FALLING: + newvalue = S3C2410_EXTINT_FALLEDGE; + break; + + case IRQ_TYPE_EDGE_BOTH: + newvalue = S3C2410_EXTINT_BOTHEDGE; + break; + + case IRQ_TYPE_LEVEL_LOW: + newvalue = S3C2410_EXTINT_LOWLEV; + break; + + case IRQ_TYPE_LEVEL_HIGH: + newvalue = S3C2410_EXTINT_HILEV; + break; + + default: + pr_err("No such irq type %d", type); + return -EINVAL; + } + + value = __raw_readl(extint_reg); + value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset); + __raw_writel(value, extint_reg); + + return 0; +} + +static int s3c_irqext_type(struct irq_data *data, unsigned int type) +{ + void __iomem *extint_reg; + void __iomem *gpcon_reg; + unsigned long gpcon_offset, extint_offset; + + if ((data->hwirq >= 4) && (data->hwirq <= 7)) { + gpcon_reg = S3C2410_GPFCON; + extint_reg = S3C24XX_EXTINT0; + gpcon_offset = (data->hwirq) * 2; + extint_offset = (data->hwirq) * 4; + } else if ((data->hwirq >= 8) && (data->hwirq <= 15)) { + gpcon_reg = S3C2410_GPGCON; + extint_reg = S3C24XX_EXTINT1; + gpcon_offset = (data->hwirq - 8) * 2; + extint_offset = (data->hwirq - 8) * 4; + } else if ((data->hwirq >= 16) && (data->hwirq <= 23)) { + gpcon_reg = S3C2410_GPGCON; + extint_reg = S3C24XX_EXTINT2; + gpcon_offset = (data->hwirq - 8) * 2; + extint_offset = (data->hwirq - 16) * 4; + } else { + return -EINVAL; + } + + return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, + extint_offset, type); +} + +static int s3c_irqext0_type(struct irq_data *data, unsigned int type) +{ + void __iomem *extint_reg; + void __iomem *gpcon_reg; + unsigned long gpcon_offset, extint_offset; + + if ((data->hwirq >= 0) && (data->hwirq <= 3)) { + gpcon_reg = S3C2410_GPFCON; + extint_reg = S3C24XX_EXTINT0; + gpcon_offset = (data->hwirq) * 2; + extint_offset = (data->hwirq) * 4; + } else { + return -EINVAL; + } + + return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, + extint_offset, type); +} + +static struct irq_chip s3c_irq_chip = { + .name = "s3c", + .irq_ack = s3c_irq_ack, + .irq_mask = s3c_irq_mask, + .irq_unmask = s3c_irq_unmask, + .irq_set_wake = s3c_irq_wake +}; + +static struct irq_chip s3c_irq_level_chip = { + .name = "s3c-level", + .irq_mask = s3c_irq_mask, + .irq_unmask = s3c_irq_unmask, + .irq_ack = s3c_irq_ack, +}; + +static struct irq_chip s3c_irqext_chip = { + .name = "s3c-ext", + .irq_mask = s3c_irq_mask, + .irq_unmask = s3c_irq_unmask, + .irq_ack = s3c_irq_ack, + .irq_set_type = s3c_irqext_type, + .irq_set_wake = s3c_irqext_wake +}; + +static struct irq_chip s3c_irq_eint0t4 = { + .name = "s3c-ext0", + .irq_ack = s3c_irq_ack, + .irq_mask = s3c_irq_mask, + .irq_unmask = s3c_irq_unmask, + .irq_set_wake = s3c_irq_wake, + .irq_set_type = s3c_irqext0_type, +}; + +static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + struct s3c_irq_intc *intc = desc->irq_data.domain->host_data; + struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq]; + struct s3c_irq_intc *sub_intc = irq_data->sub_intc; + unsigned long src; + unsigned long msk; + unsigned int n; + + chained_irq_enter(chip, desc); + + src = __raw_readl(sub_intc->reg_pending); + msk = __raw_readl(sub_intc->reg_mask); + + src &= ~msk; + src &= irq_data->sub_bits; + + while (src) { + n = __ffs(src); + src &= ~(1 << n); + generic_handle_irq(irq_find_mapping(sub_intc->domain, n)); + } + + chained_irq_exit(chip, desc); +} + +static struct s3c_irq_intc *main_intc; +static struct s3c_irq_intc *main_intc2; + +static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc, + struct pt_regs *regs) +{ + int pnd; + int offset; + int irq; + + pnd = __raw_readl(intc->reg_intpnd); + if (!pnd) + return false; + + /* We have a problem that the INTOFFSET register does not always + * show one interrupt. Occasionally we get two interrupts through + * the prioritiser, and this causes the INTOFFSET register to show + * what looks like the logical-or of the two interrupt numbers. + * + * Thanks to Klaus, Shannon, et al for helping to debug this problem + */ + offset = __raw_readl(intc->reg_intpnd + 4); + + /* Find the bit manually, when the offset is wrong. + * The pending register only ever contains the one bit of the next + * interrupt to handle. + */ + if (!(pnd & (1 << offset))) + offset = __ffs(pnd); + + irq = irq_find_mapping(intc->domain, offset); + handle_IRQ(irq, regs); + return true; +} + +asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs) +{ + do { + if (likely(main_intc)) + if (s3c24xx_handle_intc(main_intc, regs)) + continue; + + if (main_intc2) + if (s3c24xx_handle_intc(main_intc2, regs)) + continue; + + break; + } while (1); +} + +#ifdef CONFIG_FIQ +/** + * s3c24xx_set_fiq - set the FIQ routing + * @irq: IRQ number to route to FIQ on processor. + * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing. + * + * Change the state of the IRQ to FIQ routing depending on @irq and @on. If + * @on is true, the @irq is checked to see if it can be routed and the + * interrupt controller updated to route the IRQ. If @on is false, the FIQ + * routing is cleared, regardless of which @irq is specified. + */ +int s3c24xx_set_fiq(unsigned int irq, bool on) +{ + u32 intmod; + unsigned offs; + + if (on) { + offs = irq - FIQ_START; + if (offs > 31) + return -EINVAL; + + intmod = 1 << offs; + } else { + intmod = 0; + } + + __raw_writel(intmod, S3C2410_INTMOD); + return 0; +} + +EXPORT_SYMBOL_GPL(s3c24xx_set_fiq); +#endif + +static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct s3c_irq_intc *intc = h->host_data; + struct s3c_irq_data *irq_data = &intc->irqs[hw]; + struct s3c_irq_intc *parent_intc; + struct s3c_irq_data *parent_irq_data; + unsigned int irqno; + + /* attach controller pointer to irq_data */ + irq_data->intc = intc; + + parent_intc = intc->parent; + + /* set handler and flags */ + switch (irq_data->type) { + case S3C_IRQTYPE_NONE: + return 0; + case S3C_IRQTYPE_EINT: + /* On the S3C2412, the EINT0to3 have a parent irq + * but need the s3c_irq_eint0t4 chip + */ + if (parent_intc && (!soc_is_s3c2412() || hw >= 4)) + irq_set_chip_and_handler(virq, &s3c_irqext_chip, + handle_edge_irq); + else + irq_set_chip_and_handler(virq, &s3c_irq_eint0t4, + handle_edge_irq); + break; + case S3C_IRQTYPE_EDGE: + if (parent_intc || intc->reg_pending == S3C2416_SRCPND2) + irq_set_chip_and_handler(virq, &s3c_irq_level_chip, + handle_edge_irq); + else + irq_set_chip_and_handler(virq, &s3c_irq_chip, + handle_edge_irq); + break; + case S3C_IRQTYPE_LEVEL: + if (parent_intc) + irq_set_chip_and_handler(virq, &s3c_irq_level_chip, + handle_level_irq); + else + irq_set_chip_and_handler(virq, &s3c_irq_chip, + handle_level_irq); + break; + default: + pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type); + return -EINVAL; + } + set_irq_flags(virq, IRQF_VALID); + + if (parent_intc && irq_data->type != S3C_IRQTYPE_NONE) { + if (irq_data->parent_irq > 31) { + pr_err("irq-s3c24xx: parent irq %lu is out of range\n", + irq_data->parent_irq); + goto err; + } + + parent_irq_data = &parent_intc->irqs[irq_data->parent_irq]; + parent_irq_data->sub_intc = intc; + parent_irq_data->sub_bits |= (1UL << hw); + + /* attach the demuxer to the parent irq */ + irqno = irq_find_mapping(parent_intc->domain, + irq_data->parent_irq); + if (!irqno) { + pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n", + irq_data->parent_irq); + goto err; + } + irq_set_chained_handler(irqno, s3c_irq_demux); + } + + return 0; + +err: + set_irq_flags(virq, 0); + + /* the only error can result from bad mapping data*/ + return -EINVAL; +} + +static struct irq_domain_ops s3c24xx_irq_ops = { + .map = s3c24xx_irq_map, + .xlate = irq_domain_xlate_twocell, +}; + +static void s3c24xx_clear_intc(struct s3c_irq_intc *intc) +{ + void __iomem *reg_source; + unsigned long pend; + unsigned long last; + int i; + + /* if intpnd is set, read the next pending irq from there */ + reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending; + + last = 0; + for (i = 0; i < 4; i++) { + pend = __raw_readl(reg_source); + + if (pend == 0 || pend == last) + break; + + __raw_writel(pend, intc->reg_pending); + if (intc->reg_intpnd) + __raw_writel(pend, intc->reg_intpnd); + + pr_info("irq: clearing pending status %08x\n", (int)pend); + last = pend; + } +} + +static struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, + struct s3c_irq_data *irq_data, + struct s3c_irq_intc *parent, + unsigned long address) +{ + struct s3c_irq_intc *intc; + void __iomem *base = (void *)0xf6000000; /* static mapping */ + int irq_num; + int irq_start; + int ret; + + intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL); + if (!intc) + return ERR_PTR(-ENOMEM); + + intc->irqs = irq_data; + + if (parent) + intc->parent = parent; + + /* select the correct data for the controller. + * Need to hard code the irq num start and offset + * to preserve the static mapping for now + */ + switch (address) { + case 0x4a000000: + pr_debug("irq: found main intc\n"); + intc->reg_pending = base; + intc->reg_mask = base + 0x08; + intc->reg_intpnd = base + 0x10; + irq_num = 32; + irq_start = S3C2410_IRQ(0); + break; + case 0x4a000018: + pr_debug("irq: found subintc\n"); + intc->reg_pending = base + 0x18; + intc->reg_mask = base + 0x1c; + irq_num = 29; + irq_start = S3C2410_IRQSUB(0); + break; + case 0x4a000040: + pr_debug("irq: found intc2\n"); + intc->reg_pending = base + 0x40; + intc->reg_mask = base + 0x48; + intc->reg_intpnd = base + 0x50; + irq_num = 8; + irq_start = S3C2416_IRQ(0); + break; + case 0x560000a4: + pr_debug("irq: found eintc\n"); + base = (void *)0xfd000000; + + intc->reg_mask = base + 0xa4; + intc->reg_pending = base + 0x08; + irq_num = 24; + irq_start = S3C2410_IRQ(32); + break; + default: + pr_err("irq: unsupported controller address\n"); + ret = -EINVAL; + goto err; + } + + /* now that all the data is complete, init the irq-domain */ + s3c24xx_clear_intc(intc); + intc->domain = irq_domain_add_legacy(np, irq_num, irq_start, + 0, &s3c24xx_irq_ops, + intc); + if (!intc->domain) { + pr_err("irq: could not create irq-domain\n"); + ret = -EINVAL; + goto err; + } + + if (address == 0x4a000000) + main_intc = intc; + else if (address == 0x4a000040) + main_intc2 = intc; + + set_handle_irq(s3c24xx_handle_irq); + + return intc; + +err: + kfree(intc); + return ERR_PTR(ret); +} + +static struct s3c_irq_data init_eint[32] = { + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ +}; + +#ifdef CONFIG_CPU_S3C2410 +static struct s3c_irq_data init_s3c2410base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_s3c2410subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ +}; + +void __init s3c2410_init_irq(void) +{ + struct s3c_irq_intc *main_intc; + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + main_intc = s3c24xx_init_intc(NULL, &init_s3c2410base[0], NULL, 0x4a000000); + if (IS_ERR(main_intc)) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_s3c2410subint[0], main_intc, 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); +} +#endif + +#ifdef CONFIG_CPU_S3C2412 +static struct s3c_irq_data init_s3c2412base[32] = { + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT1 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT2 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* SDI/CF */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_s3c2412eint[32] = { + { .type = S3C_IRQTYPE_EINT, .parent_irq = 0 }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 1 }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 2 }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 3 }, /* EINT3 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ +}; + +static struct s3c_irq_data init_s3c2412subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_NONE, }, + { .type = S3C_IRQTYPE_NONE, }, + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* SDI */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* CF */ +}; + +void s3c2412_init_irq(void) +{ + struct s3c_irq_intc *main_intc; + + pr_info("S3C2412: IRQ Support\n"); + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + main_intc = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL, 0x4a000000); + if (IS_ERR(main_intc)) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_s3c2412eint[0], main_intc, 0x560000a4); + s3c24xx_init_intc(NULL, &init_s3c2412subint[0], main_intc, 0x4a000018); +} +#endif + +#ifdef CONFIG_CPU_S3C2416 +static struct s3c_irq_data init_s3c2416base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ + { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_NONE, }, + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_s3c2416subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ +}; + +static struct s3c_irq_data init_s3c2416_second[32] = { + { .type = S3C_IRQTYPE_EDGE }, /* 2D */ + { .type = S3C_IRQTYPE_EDGE }, /* IIC1 */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE }, /* PCM0 */ + { .type = S3C_IRQTYPE_EDGE }, /* PCM1 */ + { .type = S3C_IRQTYPE_EDGE }, /* I2S0 */ + { .type = S3C_IRQTYPE_EDGE }, /* I2S1 */ +}; + +void __init s3c2416_init_irq(void) +{ + struct s3c_irq_intc *main_intc; + + pr_info("S3C2416: IRQ Support\n"); + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000); + if (IS_ERR(main_intc)) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); + s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018); + + s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040); +} + +#endif + +#ifdef CONFIG_CPU_S3C2440 +static struct s3c_irq_data init_s3c2440base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_s3c2440subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ +}; + +void __init s3c2440_init_irq(void) +{ + struct s3c_irq_intc *main_intc; + + pr_info("S3C2440: IRQ Support\n"); + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + main_intc = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL, 0x4a000000); + if (IS_ERR(main_intc)) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); + s3c24xx_init_intc(NULL, &init_s3c2440subint[0], main_intc, 0x4a000018); +} +#endif + +#ifdef CONFIG_CPU_S3C2442 +static struct s3c_irq_data init_s3c2442base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_s3c2442subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */ +}; + +void __init s3c2442_init_irq(void) +{ + struct s3c_irq_intc *main_intc; + + pr_info("S3C2442: IRQ Support\n"); + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + main_intc = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL, 0x4a000000); + if (IS_ERR(main_intc)) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); + s3c24xx_init_intc(NULL, &init_s3c2442subint[0], main_intc, 0x4a000018); +} +#endif + +#ifdef CONFIG_CPU_S3C2443 +static struct s3c_irq_data init_s3c2443base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ + { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* CFON */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + + +static struct s3c_irq_data init_s3c2443subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ +}; + +void __init s3c2443_init_irq(void) +{ + struct s3c_irq_intc *main_intc; + + pr_info("S3C2443: IRQ Support\n"); + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000); + if (IS_ERR(main_intc)) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); + s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018); +} +#endif -- cgit v1.2.3 From 06ff14c05426ec7b7600521c4e1ae19732797e15 Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Sun, 24 Mar 2013 01:12:25 +0000 Subject: irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure This patch moves the arch-vt8500 irq code to drivers/irqchip and converts it to use the new IRQCHIP_DECLARE and irqchip_init. This allows the removal of some more functions from common.h Signed-off-by: Tony Prisk Signed-off-by: Olof Johansson --- arch/arm/mach-vt8500/Makefile | 2 +- arch/arm/mach-vt8500/common.h | 6 - arch/arm/mach-vt8500/irq.c | 253 ----------------------------------------- arch/arm/mach-vt8500/vt8500.c | 14 +-- drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-vt8500.c | 259 ++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 263 insertions(+), 272 deletions(-) delete mode 100644 arch/arm/mach-vt8500/irq.c create mode 100644 drivers/irqchip/irq-vt8500.c (limited to 'drivers/irqchip/Makefile') diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile index 92ceb2436b60..4c8a84637594 100644 --- a/arch/arm/mach-vt8500/Makefile +++ b/arch/arm/mach-vt8500/Makefile @@ -1 +1 @@ -obj-$(CONFIG_ARCH_VT8500) += irq.o vt8500.o +obj-$(CONFIG_ARCH_VT8500) += vt8500.o diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h index 77611a6968d6..087787af62f1 100644 --- a/arch/arm/mach-vt8500/common.h +++ b/arch/arm/mach-vt8500/common.h @@ -18,13 +18,7 @@ #include -int __init vt8500_irq_init(struct device_node *node, - struct device_node *parent); - /* defined in drivers/clk/clk-vt8500.c */ void __init vtwm_clk_init(void __iomem *pmc_base); -/* defined in irq.c */ -asmlinkage void vt8500_handle_irq(struct pt_regs *regs); - #endif diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c deleted file mode 100644 index b9cf5ce9efbb..000000000000 --- a/arch/arm/mach-vt8500/irq.c +++ /dev/null @@ -1,253 +0,0 @@ -/* - * arch/arm/mach-vt8500/irq.c - * - * Copyright (C) 2012 Tony Prisk - * Copyright (C) 2010 Alexey Charkov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * This file is copied and modified from the original irq.c provided by - * Alexey Charkov. Minor changes have been made for Device Tree Support. - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#define VT8500_ICPC_IRQ 0x20 -#define VT8500_ICPC_FIQ 0x24 -#define VT8500_ICDC 0x40 /* Destination Control 64*u32 */ -#define VT8500_ICIS 0x80 /* Interrupt status, 16*u32 */ - -/* ICPC */ -#define ICPC_MASK 0x3F -#define ICPC_ROTATE BIT(6) - -/* IC_DCTR */ -#define ICDC_IRQ 0x00 -#define ICDC_FIQ 0x01 -#define ICDC_DSS0 0x02 -#define ICDC_DSS1 0x03 -#define ICDC_DSS2 0x04 -#define ICDC_DSS3 0x05 -#define ICDC_DSS4 0x06 -#define ICDC_DSS5 0x07 - -#define VT8500_INT_DISABLE 0 -#define VT8500_INT_ENABLE BIT(3) - -#define VT8500_TRIGGER_HIGH 0 -#define VT8500_TRIGGER_RISING BIT(5) -#define VT8500_TRIGGER_FALLING BIT(6) -#define VT8500_EDGE ( VT8500_TRIGGER_RISING \ - | VT8500_TRIGGER_FALLING) - -/* vt8500 has 1 intc, wm8505 and wm8650 have 2 */ -#define VT8500_INTC_MAX 2 - -struct vt8500_irq_data { - void __iomem *base; /* IO Memory base address */ - struct irq_domain *domain; /* Domain for this controller */ -}; - -/* Global variable for accessing io-mem addresses */ -static struct vt8500_irq_data intc[VT8500_INTC_MAX]; -static u32 active_cnt = 0; - -static void vt8500_irq_mask(struct irq_data *d) -{ - struct vt8500_irq_data *priv = d->domain->host_data; - void __iomem *base = priv->base; - void __iomem *stat_reg = base + VT8500_ICIS + (d->hwirq < 32 ? 0 : 4); - u8 edge, dctr; - u32 status; - - edge = readb(base + VT8500_ICDC + d->hwirq) & VT8500_EDGE; - if (edge) { - status = readl(stat_reg); - - status |= (1 << (d->hwirq & 0x1f)); - writel(status, stat_reg); - } else { - dctr = readb(base + VT8500_ICDC + d->hwirq); - dctr &= ~VT8500_INT_ENABLE; - writeb(dctr, base + VT8500_ICDC + d->hwirq); - } -} - -static void vt8500_irq_unmask(struct irq_data *d) -{ - struct vt8500_irq_data *priv = d->domain->host_data; - void __iomem *base = priv->base; - u8 dctr; - - dctr = readb(base + VT8500_ICDC + d->hwirq); - dctr |= VT8500_INT_ENABLE; - writeb(dctr, base + VT8500_ICDC + d->hwirq); -} - -static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type) -{ - struct vt8500_irq_data *priv = d->domain->host_data; - void __iomem *base = priv->base; - u8 dctr; - - dctr = readb(base + VT8500_ICDC + d->hwirq); - dctr &= ~VT8500_EDGE; - - switch (flow_type) { - case IRQF_TRIGGER_LOW: - return -EINVAL; - case IRQF_TRIGGER_HIGH: - dctr |= VT8500_TRIGGER_HIGH; - __irq_set_handler_locked(d->irq, handle_level_irq); - break; - case IRQF_TRIGGER_FALLING: - dctr |= VT8500_TRIGGER_FALLING; - __irq_set_handler_locked(d->irq, handle_edge_irq); - break; - case IRQF_TRIGGER_RISING: - dctr |= VT8500_TRIGGER_RISING; - __irq_set_handler_locked(d->irq, handle_edge_irq); - break; - } - writeb(dctr, base + VT8500_ICDC + d->hwirq); - - return 0; -} - -static struct irq_chip vt8500_irq_chip = { - .name = "vt8500", - .irq_ack = vt8500_irq_mask, - .irq_mask = vt8500_irq_mask, - .irq_unmask = vt8500_irq_unmask, - .irq_set_type = vt8500_irq_set_type, -}; - -static void __init vt8500_init_irq_hw(void __iomem *base) -{ - u32 i; - - /* Enable rotating priority for IRQ */ - writel(ICPC_ROTATE, base + VT8500_ICPC_IRQ); - writel(0x00, base + VT8500_ICPC_FIQ); - - /* Disable all interrupts and route them to IRQ */ - for (i = 0; i < 64; i++) - writeb(VT8500_INT_DISABLE | ICDC_IRQ, base + VT8500_ICDC + i); -} - -static int vt8500_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - irq_set_chip_and_handler(virq, &vt8500_irq_chip, handle_level_irq); - set_irq_flags(virq, IRQF_VALID); - - return 0; -} - -static struct irq_domain_ops vt8500_irq_domain_ops = { - .map = vt8500_irq_map, - .xlate = irq_domain_xlate_onecell, -}; - -asmlinkage void __exception_irq_entry vt8500_handle_irq(struct pt_regs *regs) -{ - u32 stat, i; - int irqnr, virq; - void __iomem *base; - - /* Loop through each active controller */ - for (i=0; i VT8500_INTC_MAX\n", - __func__); - goto out; - } - - intc[active_cnt].base = of_iomap(np, 0); - intc[active_cnt].domain = irq_domain_add_linear(node, 64, - &vt8500_irq_domain_ops, &intc[active_cnt]); - - if (!intc[active_cnt].base) { - pr_err("%s: Unable to map IO memory\n", __func__); - goto out; - } - - if (!intc[active_cnt].domain) { - pr_err("%s: Unable to add irq domain!\n", __func__); - goto out; - } - - vt8500_init_irq_hw(intc[active_cnt].base); - - pr_info("vt8500-irq: Added interrupt controller\n"); - - active_cnt++; - - /* check if this is a slaved controller */ - if (of_irq_count(np) != 0) { - /* check that we have the correct number of interrupts */ - if (of_irq_count(np) != 8) { - pr_err("%s: Incorrect IRQ map for slaved controller\n", - __func__); - return -EINVAL; - } - - for (i = 0; i < 8; i++) { - irq = irq_of_parse_and_map(np, i); - enable_irq(irq); - } - - pr_info("vt8500-irq: Enabled slave->parent interrupts\n"); - } -out: - return 0; -} - diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 49e80053d828..1dd281efc020 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -20,6 +20,7 @@ #include #include +#include #include #include @@ -166,16 +167,6 @@ void __init vt8500_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static const struct of_device_id vt8500_irq_match[] __initconst = { - { .compatible = "via,vt8500-intc", .data = vt8500_irq_init, }, - { /* sentinel */ }, -}; - -static void __init vt8500_init_irq(void) -{ - of_irq_init(vt8500_irq_match); -}; - static const char * const vt8500_dt_compat[] = { "via,vt8500", "wm,wm8650", @@ -187,10 +178,9 @@ static const char * const vt8500_dt_compat[] = { DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)") .dt_compat = vt8500_dt_compat, .map_io = vt8500_map_io, - .init_irq = vt8500_init_irq, + .init_irq = irqchip_init, .init_machine = vt8500_init, .init_time = clocksource_of_init, .restart = vt8500_restart, - .handle_irq = vt8500_handle_irq, MACHINE_END diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index acf98953272a..48fbdf978494 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_ARM_VIC) += irq-vic.o obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o +obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o diff --git a/drivers/irqchip/irq-vt8500.c b/drivers/irqchip/irq-vt8500.c new file mode 100644 index 000000000000..d97059550a2c --- /dev/null +++ b/drivers/irqchip/irq-vt8500.c @@ -0,0 +1,259 @@ +/* + * arch/arm/mach-vt8500/irq.c + * + * Copyright (C) 2012 Tony Prisk + * Copyright (C) 2010 Alexey Charkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * This file is copied and modified from the original irq.c provided by + * Alexey Charkov. Minor changes have been made for Device Tree Support. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include "irqchip.h" + +#define VT8500_ICPC_IRQ 0x20 +#define VT8500_ICPC_FIQ 0x24 +#define VT8500_ICDC 0x40 /* Destination Control 64*u32 */ +#define VT8500_ICIS 0x80 /* Interrupt status, 16*u32 */ + +/* ICPC */ +#define ICPC_MASK 0x3F +#define ICPC_ROTATE BIT(6) + +/* IC_DCTR */ +#define ICDC_IRQ 0x00 +#define ICDC_FIQ 0x01 +#define ICDC_DSS0 0x02 +#define ICDC_DSS1 0x03 +#define ICDC_DSS2 0x04 +#define ICDC_DSS3 0x05 +#define ICDC_DSS4 0x06 +#define ICDC_DSS5 0x07 + +#define VT8500_INT_DISABLE 0 +#define VT8500_INT_ENABLE BIT(3) + +#define VT8500_TRIGGER_HIGH 0 +#define VT8500_TRIGGER_RISING BIT(5) +#define VT8500_TRIGGER_FALLING BIT(6) +#define VT8500_EDGE ( VT8500_TRIGGER_RISING \ + | VT8500_TRIGGER_FALLING) + +/* vt8500 has 1 intc, wm8505 and wm8650 have 2 */ +#define VT8500_INTC_MAX 2 + +struct vt8500_irq_data { + void __iomem *base; /* IO Memory base address */ + struct irq_domain *domain; /* Domain for this controller */ +}; + +/* Global variable for accessing io-mem addresses */ +static struct vt8500_irq_data intc[VT8500_INTC_MAX]; +static u32 active_cnt = 0; + +static void vt8500_irq_mask(struct irq_data *d) +{ + struct vt8500_irq_data *priv = d->domain->host_data; + void __iomem *base = priv->base; + void __iomem *stat_reg = base + VT8500_ICIS + (d->hwirq < 32 ? 0 : 4); + u8 edge, dctr; + u32 status; + + edge = readb(base + VT8500_ICDC + d->hwirq) & VT8500_EDGE; + if (edge) { + status = readl(stat_reg); + + status |= (1 << (d->hwirq & 0x1f)); + writel(status, stat_reg); + } else { + dctr = readb(base + VT8500_ICDC + d->hwirq); + dctr &= ~VT8500_INT_ENABLE; + writeb(dctr, base + VT8500_ICDC + d->hwirq); + } +} + +static void vt8500_irq_unmask(struct irq_data *d) +{ + struct vt8500_irq_data *priv = d->domain->host_data; + void __iomem *base = priv->base; + u8 dctr; + + dctr = readb(base + VT8500_ICDC + d->hwirq); + dctr |= VT8500_INT_ENABLE; + writeb(dctr, base + VT8500_ICDC + d->hwirq); +} + +static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type) +{ + struct vt8500_irq_data *priv = d->domain->host_data; + void __iomem *base = priv->base; + u8 dctr; + + dctr = readb(base + VT8500_ICDC + d->hwirq); + dctr &= ~VT8500_EDGE; + + switch (flow_type) { + case IRQF_TRIGGER_LOW: + return -EINVAL; + case IRQF_TRIGGER_HIGH: + dctr |= VT8500_TRIGGER_HIGH; + __irq_set_handler_locked(d->irq, handle_level_irq); + break; + case IRQF_TRIGGER_FALLING: + dctr |= VT8500_TRIGGER_FALLING; + __irq_set_handler_locked(d->irq, handle_edge_irq); + break; + case IRQF_TRIGGER_RISING: + dctr |= VT8500_TRIGGER_RISING; + __irq_set_handler_locked(d->irq, handle_edge_irq); + break; + } + writeb(dctr, base + VT8500_ICDC + d->hwirq); + + return 0; +} + +static struct irq_chip vt8500_irq_chip = { + .name = "vt8500", + .irq_ack = vt8500_irq_mask, + .irq_mask = vt8500_irq_mask, + .irq_unmask = vt8500_irq_unmask, + .irq_set_type = vt8500_irq_set_type, +}; + +static void __init vt8500_init_irq_hw(void __iomem *base) +{ + u32 i; + + /* Enable rotating priority for IRQ */ + writel(ICPC_ROTATE, base + VT8500_ICPC_IRQ); + writel(0x00, base + VT8500_ICPC_FIQ); + + /* Disable all interrupts and route them to IRQ */ + for (i = 0; i < 64; i++) + writeb(VT8500_INT_DISABLE | ICDC_IRQ, base + VT8500_ICDC + i); +} + +static int vt8500_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + irq_set_chip_and_handler(virq, &vt8500_irq_chip, handle_level_irq); + set_irq_flags(virq, IRQF_VALID); + + return 0; +} + +static struct irq_domain_ops vt8500_irq_domain_ops = { + .map = vt8500_irq_map, + .xlate = irq_domain_xlate_onecell, +}; + +asmlinkage void __exception_irq_entry vt8500_handle_irq(struct pt_regs *regs) +{ + u32 stat, i; + int irqnr, virq; + void __iomem *base; + + /* Loop through each active controller */ + for (i=0; i VT8500_INTC_MAX\n", + __func__); + goto out; + } + + intc[active_cnt].base = of_iomap(np, 0); + intc[active_cnt].domain = irq_domain_add_linear(node, 64, + &vt8500_irq_domain_ops, &intc[active_cnt]); + + if (!intc[active_cnt].base) { + pr_err("%s: Unable to map IO memory\n", __func__); + goto out; + } + + if (!intc[active_cnt].domain) { + pr_err("%s: Unable to add irq domain!\n", __func__); + goto out; + } + + set_handle_irq(vt8500_handle_irq); + + vt8500_init_irq_hw(intc[active_cnt].base); + + pr_info("vt8500-irq: Added interrupt controller\n"); + + active_cnt++; + + /* check if this is a slaved controller */ + if (of_irq_count(np) != 0) { + /* check that we have the correct number of interrupts */ + if (of_irq_count(np) != 8) { + pr_err("%s: Incorrect IRQ map for slaved controller\n", + __func__); + return -EINVAL; + } + + for (i = 0; i < 8; i++) { + irq = irq_of_parse_and_map(np, i); + enable_irq(irq); + } + + pr_info("vt8500-irq: Enabled slave->parent interrupts\n"); + } +out: + return 0; +} + +IRQCHIP_DECLARE(vt8500_irq, "via,vt8500-intc", vt8500_irq_init); -- cgit v1.2.3