From ba01cf0e1244fc3e4a24b4a111148c0d70025b36 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Tue, 17 May 2016 15:31:06 +0100 Subject: irqchip: mips-gic: Setup EIC mode on each CPU if it's in use When EIC mode is in use (cpu_has_veic is true) enable it on each CPU during GIC initialisation. Otherwise there may be a mismatch between the hardware default interrupt model & that expected by the kernel. Signed-off-by: Paul Burton Reviewed-by: Matt Redfearn Tested-by: Matt Redfearn Acked-by: Thomas Gleixner Cc: Paul Burton Cc: Marc Zyngier Cc: Jason Cooper Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13274/ Signed-off-by: Ralf Baechle --- drivers/irqchip/irq-mips-gic.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/irqchip') diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c index c089f49b63fb..3b5e10aa48ab 100644 --- a/drivers/irqchip/irq-mips-gic.c +++ b/drivers/irqchip/irq-mips-gic.c @@ -968,7 +968,7 @@ static void __init __gic_init(unsigned long gic_base_addr, unsigned int cpu_vec, unsigned int irqbase, struct device_node *node) { - unsigned int gicconfig; + unsigned int gicconfig, cpu; unsigned int v[2]; __gic_base_addr = gic_base_addr; @@ -985,6 +985,14 @@ static void __init __gic_init(unsigned long gic_base_addr, gic_vpes = gic_vpes + 1; if (cpu_has_veic) { + /* Set EIC mode for all VPEs */ + for_each_present_cpu(cpu) { + gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), + mips_cm_vp_id(cpu)); + gic_write(GIC_REG(VPE_OTHER, GIC_VPE_CTL), + GIC_VPE_CTL_EIC_MODE_MSK); + } + /* Always use vector 1 in EIC mode */ gic_cpu_pin = 0; timer_cpu_pin = gic_cpu_pin; -- cgit v1.2.3