From acebcff9eda8c38fd78acbfb9fab555b3a2ba5eb Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 26 May 2017 13:15:30 +0200 Subject: mfd: intel_soc_pmic: Select designware i2c-bus driver The Crystal Cove PMIC provides an ACPI OPRegion handler, which must be available before other drivers using it are loaded, which is why INTEL_SOC_PMIC is a bool. Just having the driver is not enough, the driver for the i2c-bus must also be built in, to ensure this, this patch adds a select for it. This fixes errors like these during boot: mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA ACPI Error: No handler for Region [REGS] (ffff93543b0cc3a8) [UserDefinedRegion] (20170119/evregion-166) ACPI Error: Region UserDefinedRegion (ID=143) has no handler (20170119/exfldio-299) ACPI Error: Method parse/execution failed [\_SB.PCI0.I2C7.PMI5.GET] (Node ffff93543b0cde10), AE_NOT_EXIST (20170119/psparse-543) ACPI Error: Method parse/execution failed [\_SB.PCI0.SHC1._PS0] (Node ffff93543b0b5cd0), AE_NOT_EXIST (20170119/psparse-543) acpi 80860F14:02: Failed to change power state to D0 While at it this patch also changes the human readable name of the Kconfig option to make clear the INTEL_SOC_PMIC option selects support for the Intel Crystal Cove PMIC and documents why this is a bool. [The above patch caused a build error on some archetectures] From: Arnd Bergmann I ran into a build error on ARM with a platform that has a non-standard clk implementation: drivers/clk/clk.o: In function `clk_disable': clk.c:(.text.clk_disable+0x0): multiple definition of `clk_disable' arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_disable+0x0): first defined here drivers/clk/clk.o: In function `clk_enable': clk.c:(.text.clk_enable+0x0): multiple definition of `clk_enable' arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_enable+0x0): first defined here The problem is a device driver that uses 'select COMMON_CLK', which is generally a bad idea: selecting a subsystem should only be done from a platform, otherwise we run into circular dependencies. The same driver also selects 'GPIOLIB' and 'I2C', which has a similar effect. This turns all three into 'depends on', as it should be. Finally, we can limit the build to x86, unless we are compile testing. First patch: Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Signed-off-by: Lee Jones Fix for first patch (squashed): Signed-off-by: Arnd Bergmann Signed-off-by: Hans de Goede Signed-off-by: Lee Jones --- drivers/mfd/Kconfig | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 3eb5c93595f6..2ca88fc4698d 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -448,17 +448,22 @@ config LPC_SCH config INTEL_SOC_PMIC bool "Support for Crystal Cove PMIC" - depends on GPIOLIB - depends on I2C=y + depends on HAS_IOMEM && I2C=y && GPIOLIB && COMMON_CLK + depends on X86 || COMPILE_TEST select MFD_CORE select REGMAP_I2C select REGMAP_IRQ + select I2C_DESIGNWARE_PLATFORM if ACPI help Select this option to enable support for Crystal Cove PMIC on some Intel SoC systems. The PMIC provides ADC, GPIO, thermal, charger and related power management functions on these systems. + This option is a bool as it provides an ACPI OpRegion which must be + available before any devices using it are probed. This option also + causes the designware-i2c driver to be builtin for the same reason. + config INTEL_SOC_PMIC_BXTWC tristate "Support for Intel Broxton Whiskey Cove PMIC" depends on INTEL_PMC_IPC -- cgit v1.2.3