From 09c8192be713a30ace01ac00a90bc3361b7fcd12 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Thu, 28 Jun 2018 09:31:36 +0200 Subject: mmc: sdhci-esdhc-imx: support eMMC DDR mode when running at 3.3V The uSDHC supports DDR modes for eMMC devices running at 3.3V. This allows to run eMMC with 3.3V signaling voltage at DDR52 mode: # cat /sys/kernel/debug/mmc1/ios clock: 52000000 Hz vdd: 21 (3.3 ~ 3.4 V) bus mode: 2 (push-pull) chip select: 0 (don't care) power mode: 2 (on) bus width: 3 (8 bits) timing spec: 8 (mmc DDR52) signal voltage: 0 (3.30 V) driver type: 0 (driver type B) Signed-off-by: Stefan Agner Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-esdhc-imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mmc/host/sdhci-esdhc-imx.c') diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 4eb3d29ecde1..f9aa832735e4 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -1318,7 +1318,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) if (esdhc_is_usdhc(imx_data)) { host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN; - host->mmc->caps |= MMC_CAP_1_8V_DDR; + host->mmc->caps |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR; if (!(imx_data->socdata->flags & ESDHC_FLAG_HS200)) host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200; -- cgit v1.2.3