From ef5eeea6e911540bbf51a283fe0ffb7389cbe66a Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Wed, 3 Feb 2016 19:59:36 +0100 Subject: mtd: nand: brcm: switch to mtd_ooblayout_ops Implementing the mtd_ooblayout_ops interface is the new way of exposing ECC/OOB layout to MTD users. Signed-off-by: Boris Brezillon --- drivers/mtd/nand/brcmnand/brcmnand.c | 258 +++++++++++++++++++++-------------- 1 file changed, 157 insertions(+), 101 deletions(-) (limited to 'drivers/mtd/nand/brcmnand') diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c index e5f281f148dc..c3331ffcaffd 100644 --- a/drivers/mtd/nand/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/brcmnand/brcmnand.c @@ -780,127 +780,183 @@ static inline bool is_hamming_ecc(struct brcmnand_cfg *cfg) } /* - * Returns a nand_ecclayout strucutre for the given layout/configuration. - * Returns NULL on failure. + * Set mtd->ooblayout to the appropriate mtd_ooblayout_ops given + * the layout/configuration. + * Returns -ERRCODE on failure. */ -static struct nand_ecclayout *brcmnand_create_layout(int ecc_level, - struct brcmnand_host *host) +static int brcmnand_hamming_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) { + struct nand_chip *chip = mtd_to_nand(mtd); + struct brcmnand_host *host = nand_get_controller_data(chip); struct brcmnand_cfg *cfg = &host->hwcfg; - int i, j; - struct nand_ecclayout *layout; - int req; - int sectors; - int sas; - int idx1, idx2; - - layout = devm_kzalloc(&host->pdev->dev, sizeof(*layout), GFP_KERNEL); - if (!layout) - return NULL; - - sectors = cfg->page_size / (512 << cfg->sector_size_1k); - sas = cfg->spare_area_size << cfg->sector_size_1k; - - /* Hamming */ - if (is_hamming_ecc(cfg)) { - for (i = 0, idx1 = 0, idx2 = 0; i < sectors; i++) { - /* First sector of each page may have BBI */ - if (i == 0) { - layout->oobfree[idx2].offset = i * sas + 1; - /* Small-page NAND use byte 6 for BBI */ - if (cfg->page_size == 512) - layout->oobfree[idx2].offset--; - layout->oobfree[idx2].length = 5; - } else { - layout->oobfree[idx2].offset = i * sas; - layout->oobfree[idx2].length = 6; - } - idx2++; - layout->eccpos[idx1++] = i * sas + 6; - layout->eccpos[idx1++] = i * sas + 7; - layout->eccpos[idx1++] = i * sas + 8; - layout->oobfree[idx2].offset = i * sas + 9; - layout->oobfree[idx2].length = 7; - idx2++; - /* Leave zero-terminated entry for OOBFREE */ - if (idx1 >= MTD_MAX_ECCPOS_ENTRIES_LARGE || - idx2 >= MTD_MAX_OOBFREE_ENTRIES_LARGE - 1) - break; - } + int sas = cfg->spare_area_size << cfg->sector_size_1k; + int sectors = cfg->page_size / (512 << cfg->sector_size_1k); - return layout; - } + if (section >= sectors) + return -ERANGE; - /* - * CONTROLLER_VERSION: - * < v5.0: ECC_REQ = ceil(BCH_T * 13/8) - * >= v5.0: ECC_REQ = ceil(BCH_T * 14/8) - * But we will just be conservative. - */ - req = DIV_ROUND_UP(ecc_level * 14, 8); - if (req >= sas) { - dev_err(&host->pdev->dev, - "error: ECC too large for OOB (ECC bytes %d, spare sector %d)\n", - req, sas); - return NULL; - } + oobregion->offset = (section * sas) + 6; + oobregion->length = 3; + + return 0; +} + +static int brcmnand_hamming_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct brcmnand_host *host = nand_get_controller_data(chip); + struct brcmnand_cfg *cfg = &host->hwcfg; + int sas = cfg->spare_area_size << cfg->sector_size_1k; + int sectors = cfg->page_size / (512 << cfg->sector_size_1k); + + if (section >= sectors * 2) + return -ERANGE; - layout->eccbytes = req * sectors; - for (i = 0, idx1 = 0, idx2 = 0; i < sectors; i++) { - for (j = sas - req; j < sas && idx1 < - MTD_MAX_ECCPOS_ENTRIES_LARGE; j++, idx1++) - layout->eccpos[idx1] = i * sas + j; + oobregion->offset = (section / 2) * sas; + + if (section & 1) { + oobregion->offset += 9; + oobregion->length = 7; + } else { + oobregion->length = 6; /* First sector of each page may have BBI */ - if (i == 0) { - if (cfg->page_size == 512 && (sas - req >= 6)) { - /* Small-page NAND use byte 6 for BBI */ - layout->oobfree[idx2].offset = 0; - layout->oobfree[idx2].length = 5; - idx2++; - if (sas - req > 6) { - layout->oobfree[idx2].offset = 6; - layout->oobfree[idx2].length = - sas - req - 6; - idx2++; - } - } else if (sas > req + 1) { - layout->oobfree[idx2].offset = i * sas + 1; - layout->oobfree[idx2].length = sas - req - 1; - idx2++; - } - } else if (sas > req) { - layout->oobfree[idx2].offset = i * sas; - layout->oobfree[idx2].length = sas - req; - idx2++; + if (!section) { + /* + * Small-page NAND use byte 6 for BBI while large-page + * NAND use byte 0. + */ + if (cfg->page_size > 512) + oobregion->offset++; + oobregion->length--; } - /* Leave zero-terminated entry for OOBFREE */ - if (idx1 >= MTD_MAX_ECCPOS_ENTRIES_LARGE || - idx2 >= MTD_MAX_OOBFREE_ENTRIES_LARGE - 1) - break; } - return layout; + return 0; +} + +static const struct mtd_ooblayout_ops brcmnand_hamming_ooblayout_ops = { + .ecc = brcmnand_hamming_ooblayout_ecc, + .free = brcmnand_hamming_ooblayout_free, +}; + +static int brcmnand_bch_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct brcmnand_host *host = nand_get_controller_data(chip); + struct brcmnand_cfg *cfg = &host->hwcfg; + int sas = cfg->spare_area_size << cfg->sector_size_1k; + int sectors = cfg->page_size / (512 << cfg->sector_size_1k); + + if (section >= sectors) + return -ERANGE; + + oobregion->offset = (section * (sas + 1)) - chip->ecc.bytes; + oobregion->length = chip->ecc.bytes; + + return 0; } -static struct nand_ecclayout *brcmstb_choose_ecc_layout( - struct brcmnand_host *host) +static int brcmnand_bch_ooblayout_free_lp(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct brcmnand_host *host = nand_get_controller_data(chip); + struct brcmnand_cfg *cfg = &host->hwcfg; + int sas = cfg->spare_area_size << cfg->sector_size_1k; + int sectors = cfg->page_size / (512 << cfg->sector_size_1k); + + if (section >= sectors) + return -ERANGE; + + if (sas <= chip->ecc.bytes) + return 0; + + oobregion->offset = section * sas; + oobregion->length = sas - chip->ecc.bytes; + + if (!section) { + oobregion->offset++; + oobregion->length--; + } + + return 0; +} + +static int brcmnand_bch_ooblayout_free_sp(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct brcmnand_host *host = nand_get_controller_data(chip); + struct brcmnand_cfg *cfg = &host->hwcfg; + int sas = cfg->spare_area_size << cfg->sector_size_1k; + + if (section > 1 || sas - chip->ecc.bytes < 6 || + (section && sas - chip->ecc.bytes == 6)) + return -ERANGE; + + if (!section) { + oobregion->offset = 0; + oobregion->length = 5; + } else { + oobregion->offset = 6; + oobregion->length = sas - chip->ecc.bytes - 6; + } + + return 0; +} + +static const struct mtd_ooblayout_ops brcmnand_bch_lp_ooblayout_ops = { + .ecc = brcmnand_bch_ooblayout_ecc, + .free = brcmnand_bch_ooblayout_free_lp, +}; + +static const struct mtd_ooblayout_ops brcmnand_bch_sp_ooblayout_ops = { + .ecc = brcmnand_bch_ooblayout_ecc, + .free = brcmnand_bch_ooblayout_free_sp, +}; + +static int brcmstb_choose_ecc_layout(struct brcmnand_host *host) { - struct nand_ecclayout *layout; struct brcmnand_cfg *p = &host->hwcfg; + struct mtd_info *mtd = nand_to_mtd(&host->chip); + struct nand_ecc_ctrl *ecc = &host->chip.ecc; unsigned int ecc_level = p->ecc_level; + int sas = p->spare_area_size << p->sector_size_1k; + int sectors = p->page_size / (512 << p->sector_size_1k); if (p->sector_size_1k) ecc_level <<= 1; - layout = brcmnand_create_layout(ecc_level, host); - if (!layout) { + if (is_hamming_ecc(p)) { + ecc->bytes = 3 * sectors; + mtd_set_ooblayout(mtd, &brcmnand_hamming_ooblayout_ops); + return 0; + } + + /* + * CONTROLLER_VERSION: + * < v5.0: ECC_REQ = ceil(BCH_T * 13/8) + * >= v5.0: ECC_REQ = ceil(BCH_T * 14/8) + * But we will just be conservative. + */ + ecc->bytes = DIV_ROUND_UP(ecc_level * 14, 8); + if (p->page_size == 512) + mtd_set_ooblayout(mtd, &brcmnand_bch_sp_ooblayout_ops); + else + mtd_set_ooblayout(mtd, &brcmnand_bch_lp_ooblayout_ops); + + if (ecc->bytes >= sas) { dev_err(&host->pdev->dev, - "no proper ecc_layout for this NAND cfg\n"); - return NULL; + "error: ECC too large for OOB (ECC bytes %d, spare sector %d)\n", + ecc->bytes, sas); + return -EINVAL; } - return layout; + return 0; } static void brcmnand_wp(struct mtd_info *mtd, int wp) @@ -2010,9 +2066,9 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn) /* only use our internal HW threshold */ mtd->bitflip_threshold = 1; - chip->ecc.layout = brcmstb_choose_ecc_layout(host); - if (!chip->ecc.layout) - return -ENXIO; + ret = brcmstb_choose_ecc_layout(host); + if (ret) + return ret; if (nand_scan_tail(mtd)) return -ENXIO; -- cgit v1.2.3