From 427d269f17fd02d192e9ae3bd93bdc07790fa02c Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 20 Jun 2006 12:10:57 +0200 Subject: [PATCH] AT91RM9200 Ethernet #3: Cleanup Moved global ether_clk variable into controller data structure. Patch from David Brownell. Davicom 9161 PHY was being incorrectly displayed as "9196". Patch from Brian Stafford. clk_get() doesn't return NULL on error, so the return value needs to be tested with IS_ERR(). Whitespace cleanup. Signed-off-by: Andrew Victor Signed-off-by: Jeff Garzik --- drivers/net/arm/at91_ether.c | 29 +++++++++++++++-------------- drivers/net/arm/at91_ether.h | 1 + 2 files changed, 16 insertions(+), 14 deletions(-) (limited to 'drivers/net/arm') diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c index cc773662d9f9..d081241f613d 100644 --- a/drivers/net/arm/at91_ether.c +++ b/drivers/net/arm/at91_ether.c @@ -43,7 +43,6 @@ #define DRV_VERSION "1.0" static struct net_device *at91_dev; -static struct clk *ether_clk; static struct timer_list check_timer; #define LINK_POLL_INTERVAL (HZ) @@ -519,7 +518,7 @@ static int hash_get_index(__u8 *addr) hash_index |= (bitval << j); } - return hash_index; + return hash_index; } /* @@ -575,10 +574,8 @@ static void at91ether_set_rx_mode(struct net_device *dev) at91_emac_write(AT91_EMAC_CFG, cfg); } - /* ......................... ETHTOOL SUPPORT ........................... */ - static int mdio_read(struct net_device *dev, int phy_id, int location) { unsigned int value; @@ -719,10 +716,10 @@ static int at91ether_open(struct net_device *dev) struct at91_private *lp = (struct at91_private *) dev->priv; unsigned long ctl; - if (!is_valid_ether_addr(dev->dev_addr)) - return -EADDRNOTAVAIL; + if (!is_valid_ether_addr(dev->dev_addr)) + return -EADDRNOTAVAIL; - clk_enable(ether_clk); /* Re-enable Peripheral clock */ + clk_enable(lp->ether_clk); /* Re-enable Peripheral clock */ /* Clear internal statistics */ ctl = at91_emac_read(AT91_EMAC_CTL); @@ -756,6 +753,7 @@ static int at91ether_open(struct net_device *dev) */ static int at91ether_close(struct net_device *dev) { + struct at91_private *lp = (struct at91_private *) dev->priv; unsigned long ctl; /* Disable Receiver and Transmitter */ @@ -772,7 +770,7 @@ static int at91ether_close(struct net_device *dev) netif_stop_queue(dev); - clk_disable(ether_clk); /* Disable Peripheral clock */ + clk_disable(lp->ether_clk); /* Disable Peripheral clock */ return 0; } @@ -904,7 +902,7 @@ static irqreturn_t at91ether_interrupt(int irq, void *dev_id, struct pt_regs *re if (intstatus & AT91_EMAC_RCOM) /* Receive complete */ at91ether_rx(dev); - if (intstatus & AT91_EMAC_TCOM) { /* Transmit complete */ + if (intstatus & AT91_EMAC_TCOM) { /* Transmit complete */ /* The TCOM bit is set even if the transmission failed. */ if (intstatus & (AT91_EMAC_TUND | AT91_EMAC_RTRY)) lp->stats.tx_errors += 1; @@ -933,7 +931,8 @@ static irqreturn_t at91ether_interrupt(int irq, void *dev_id, struct pt_regs *re /* * Initialize the ethernet interface */ -static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_address, struct platform_device *pdev) +static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_address, + struct platform_device *pdev, struct clk *ether_clk) { struct at91_eth_data *board_data = pdev->dev.platform_data; struct net_device *dev; @@ -967,6 +966,7 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add return -ENOMEM; } lp->board_data = *board_data; + lp->ether_clk = ether_clk; platform_set_drvdata(pdev, dev); spin_lock_init(&lp->lock); @@ -1050,7 +1050,7 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]); if ((phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) - printk(KERN_INFO "%s: Davicom 9196 PHY %s\n", dev->name, (lp->phy_media == PORT_FIBRE) ? "(Fiber)" : "(Copper)"); + printk(KERN_INFO "%s: Davicom 9161 PHY %s\n", dev->name, (lp->phy_media == PORT_FIBRE) ? "(Fiber)" : "(Copper)"); else if (phy_type == MII_LXT971A_ID) printk(KERN_INFO "%s: Intel LXT971A PHY\n", dev->name); else if (phy_type == MII_RTL8201_ID) @@ -1076,9 +1076,10 @@ static int __init at91ether_probe(struct platform_device *pdev) int detected = -1; unsigned long phy_id; unsigned short phy_address = 0; + struct clk *ether_clk; ether_clk = clk_get(&pdev->dev, "ether_clk"); - if (!ether_clk) { + if (IS_ERR(ether_clk)) { printk(KERN_ERR "at91_ether: no clock defined\n"); return -ENODEV; } @@ -1101,7 +1102,7 @@ static int __init at91ether_probe(struct platform_device *pdev) case MII_DP83847_ID: /* National Semiconductor DP83847: */ case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */ case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */ - detected = at91ether_setup(phy_id, phy_address, pdev); + detected = at91ether_setup(phy_id, phy_address, pdev, ether_clk); break; } @@ -1120,7 +1121,7 @@ static int __devexit at91ether_remove(struct platform_device *pdev) unregister_netdev(at91_dev); free_irq(at91_dev->irq, at91_dev); dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys); - clk_put(ether_clk); + clk_put(lp->ether_clk); free_netdev(at91_dev); at91_dev = NULL; diff --git a/drivers/net/arm/at91_ether.h b/drivers/net/arm/at91_ether.h index 9885735c9c8a..d1e72e02be3a 100644 --- a/drivers/net/arm/at91_ether.h +++ b/drivers/net/arm/at91_ether.h @@ -80,6 +80,7 @@ struct at91_private struct net_device_stats stats; struct mii_if_info mii; /* ethtool support */ struct at91_eth_data board_data; /* board-specific configuration */ + struct clk *ether_clk; /* clock */ /* PHY */ unsigned long phy_type; /* type of PHY (PHY_ID) */ -- cgit v1.2.3