From 626a83238e6a63d88a5b5291febe797b244b5f18 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 27 May 2020 19:45:38 +0300 Subject: net: dsa: felix: accept VLAN config regardless of bridge VLAN awareness state The ocelot core library is written with the idea in mind that the VLAN table is populated by the bridge. Otherwise, not even a sane default pvid is provided: in standalone mode, the default pvid is 0, and the core expects the bridge layer to change it to 1. So without this patch, the VLAN table is completely empty at the end of the commands below, and traffic is broken as a result: ip link add dev br0 type bridge vlan_filtering 0 && ip link set dev br0 up for eth in $(ls /sys/bus/pci/devices/0000\:00\:00.5/net/); do ip link set dev $eth master br0 ip link set dev $eth up done ip link set dev br0 type bridge vlan_filtering 1 Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/ocelot/felix.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/dsa') diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c index 18c23ffd6b40..a6e272d2110d 100644 --- a/drivers/net/dsa/ocelot/felix.c +++ b/drivers/net/dsa/ocelot/felix.c @@ -594,6 +594,7 @@ static int felix_setup(struct dsa_switch *ds) ANA_FLOODING, tc); ds->mtu_enforcement_ingress = true; + ds->configure_vlan_while_not_filtering = true; /* It looks like the MAC/PCS interrupt register - PM0_IEVENT (0x8040) * isn't instantiated for the Felix PF. * In-band AN may take a few ms to complete, so we need to poll. -- cgit v1.2.3