From 81d4e8e0731408c7fc66409cbf97f10f38964dc1 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 3 Aug 2020 13:03:50 -0700 Subject: net: dsa: loop: PVID should be per-port The PVID should be per-port, this is a preliminary change to support a 802.1Q data path in the driver. Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/dsa_loop.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net/dsa') diff --git a/drivers/net/dsa/dsa_loop.c b/drivers/net/dsa/dsa_loop.c index f8bc85a6e670..4a57238cdfd8 100644 --- a/drivers/net/dsa/dsa_loop.c +++ b/drivers/net/dsa/dsa_loop.c @@ -45,6 +45,7 @@ static struct dsa_loop_mib_entry dsa_loop_mibs[] = { struct dsa_loop_port { struct dsa_loop_mib_entry mib[__DSA_LOOP_CNT_MAX]; + u16 pvid; }; #define DSA_LOOP_VLANS 5 @@ -55,7 +56,6 @@ struct dsa_loop_priv { struct dsa_loop_vlan vlans[DSA_LOOP_VLANS]; struct net_device *netdev; struct dsa_loop_port ports[DSA_MAX_PORTS]; - u16 pvid; }; static struct phy_device *phydevs[PHY_MAX_ADDR]; @@ -224,7 +224,7 @@ static void dsa_loop_port_vlan_add(struct dsa_switch *ds, int port, } if (pvid) - ps->pvid = vid; + ps->ports[port].pvid = vid; } static int dsa_loop_port_vlan_del(struct dsa_switch *ds, int port, @@ -234,7 +234,7 @@ static int dsa_loop_port_vlan_del(struct dsa_switch *ds, int port, struct dsa_loop_priv *ps = ds->priv; struct mii_bus *bus = ps->bus; struct dsa_loop_vlan *vl; - u16 vid, pvid = ps->pvid; + u16 vid, pvid = ps->ports[port].pvid; /* Just do a sleeping operation to make lockdep checks effective */ mdiobus_read(bus, ps->port_base + port, MII_BMSR); @@ -252,7 +252,7 @@ static int dsa_loop_port_vlan_del(struct dsa_switch *ds, int port, dev_dbg(ds->dev, "%s: port: %d vlan: %d, %stagged, pvid: %d\n", __func__, port, vid, untagged ? "un" : "", pvid); } - ps->pvid = pvid; + ps->ports[port].pvid = pvid; return 0; } -- cgit v1.2.3