From 0e98f9d5f0b4a9012bd4fb5ff88b3ea290deb6a8 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 27 Jan 2017 20:46:27 +0100 Subject: ravb: Support 1Gbps on R-Car H3 ES1.1+ and R-Car M3-W The limitation to 10/100Mbit speeds on R-Car Gen3 is valid for R-Car H3 ES1.0 only. Check for the exact SoC model to allow 1Gbps on newer revisions of R-Car H3, and on R-Car M3-W. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman Acked-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet/renesas') diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 9d8320edea53..8cfc4a54f2dc 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -31,6 +31,7 @@ #include #include #include +#include #include @@ -988,6 +989,11 @@ static void ravb_adjust_link(struct net_device *ndev) phy_print_status(phydev); } +static const struct soc_device_attribute r8a7795es10[] = { + { .soc_id = "r8a7795", .revision = "ES1.0", }, + { /* sentinel */ } +}; + /* PHY init function */ static int ravb_phy_init(struct net_device *ndev) { @@ -1023,10 +1029,10 @@ static int ravb_phy_init(struct net_device *ndev) goto err_deregister_fixed_link; } - /* This driver only support 10/100Mbit speeds on Gen3 + /* This driver only support 10/100Mbit speeds on R-Car H3 ES1.0 * at this time. */ - if (priv->chip_id == RCAR_GEN3) { + if (soc_device_match(r8a7795es10)) { err = phy_set_max_speed(phydev, SPEED_100); if (err) { netdev_err(ndev, "failed to limit PHY to 100Mbit/s\n"); -- cgit v1.2.3