From 99d744875d01d57d832b8dbfc36d9a1990d503b8 Mon Sep 17 00:00:00 2001
From: Alexander Duyck
Date: Wed, 9 May 2012 08:09:25 +0000
Subject: ixgbe: Drop probe_vf and merge functionality into ixgbe_enable_sriov

This is meant to fix a bug in which we were not checking for pre-existing
VFs if we were not setting the max_vfs value at driver load.  What happens
now is that we always call ixgbe_enable_sriov and this checks for
pre-existing VFs ore requested VFs prior to deciding on no SR-IOV.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c   |  3 +--
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c  | 33 ++++++++------------------
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 24 +++++++++++++------
 3 files changed, 28 insertions(+), 32 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
index 38d1b65777ad..3ff5aa801a6b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
@@ -1061,8 +1061,7 @@ static void ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
 	}
 	adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
 	adapter->atr_sample_rate = 0;
-	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
-		ixgbe_disable_sriov(adapter);
+	ixgbe_disable_sriov(adapter);
 
 	adapter->ring_feature[RING_F_RSS].limit = 1;
 	ixgbe_set_num_queues(adapter);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index f4e53c1a7338..24f2b455a23f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -4490,6 +4490,12 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 	hw->fc.send_xon = true;
 	hw->fc.disable_fc_autoneg = false;
 
+#ifdef CONFIG_PCI_IOV
+	/* assign number of SR-IOV VFs */
+	if (hw->mac.type != ixgbe_mac_82598EB)
+		adapter->num_vfs = (max_vfs > 63) ? 0 : max_vfs;
+
+#endif
 	/* enable itr by default in dynamic mode */
 	adapter->rx_itr_setting = 1;
 	adapter->tx_itr_setting = 1;
@@ -6942,26 +6948,6 @@ static const struct net_device_ops ixgbe_netdev_ops = {
 	.ndo_fdb_dump		= ixgbe_ndo_fdb_dump,
 };
 
-static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
-				     const struct ixgbe_info *ii)
-{
-#ifdef CONFIG_PCI_IOV
-	struct ixgbe_hw *hw = &adapter->hw;
-
-	if (hw->mac.type == ixgbe_mac_82598EB)
-		return;
-
-	/* The 82599 supports up to 64 VFs per physical function
-	 * but this implementation limits allocation to 63 so that
-	 * basic networking resources are still available to the
-	 * physical function.  If the user requests greater thn
-	 * 63 VFs then it is an error - reset to default of zero.
-	 */
-	adapter->num_vfs = (max_vfs > 63) ? 0 : max_vfs;
-	ixgbe_enable_sriov(adapter, ii);
-#endif /* CONFIG_PCI_IOV */
-}
-
 /**
  * ixgbe_wol_supported - Check whether device supports WoL
  * @hw: hw specific details
@@ -7206,8 +7192,10 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 		goto err_sw_init;
 	}
 
-	ixgbe_probe_vf(adapter, ii);
+#ifdef CONFIG_PCI_IOV
+	ixgbe_enable_sriov(adapter, ii);
 
+#endif
 	netdev->features = NETIF_F_SG |
 			   NETIF_F_IP_CSUM |
 			   NETIF_F_IPV6_CSUM |
@@ -7411,8 +7399,7 @@ err_register:
 	ixgbe_release_hw_control(adapter);
 	ixgbe_clear_interrupt_scheme(adapter);
 err_sw_init:
-	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
-		ixgbe_disable_sriov(adapter);
+	ixgbe_disable_sriov(adapter);
 	adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP;
 	iounmap(hw->hw_addr);
 err_ioremap:
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index a825d4808cd2..593fdd54f9ab 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -82,7 +82,6 @@ void ixgbe_enable_sriov(struct ixgbe_adapter *adapter,
 			 const struct ixgbe_info *ii)
 {
 	struct ixgbe_hw *hw = &adapter->hw;
-	int err = 0;
 	int num_vf_macvlans, i;
 	struct vf_macvlans *mv_list;
 	int pre_existing_vfs = 0;
@@ -106,10 +105,21 @@ void ixgbe_enable_sriov(struct ixgbe_adapter *adapter,
 			 "enabled for this device - Please reload all "
 			 "VF drivers to avoid spoofed packet errors\n");
 	} else {
+		int err;
+		/*
+		 * The 82599 supports up to 64 VFs per physical function
+		 * but this implementation limits allocation to 63 so that
+		 * basic networking resources are still available to the
+		 * physical function.  If the user requests greater thn
+		 * 63 VFs then it is an error - reset to default of zero.
+		 */
+		adapter->num_vfs = min_t(unsigned int, adapter->num_vfs, 63);
+
 		err = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
 		if (err) {
 			e_err(probe, "Failed to enable PCI sriov: %d\n", err);
-			goto err_novfs;
+			adapter->num_vfs = 0;
+			return;
 		}
 	}
 
@@ -193,11 +203,7 @@ void ixgbe_enable_sriov(struct ixgbe_adapter *adapter,
 	/* Oh oh */
 	e_err(probe, "Unable to allocate memory for VF Data Storage - "
 	      "SRIOV disabled\n");
-	pci_disable_sriov(adapter->pdev);
-
-err_novfs:
-	adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
-	adapter->num_vfs = 0;
+	ixgbe_disable_sriov(adapter);
 }
 #endif /* #ifdef CONFIG_PCI_IOV */
 
@@ -219,6 +225,10 @@ void ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
 	kfree(adapter->mv_list);
 	adapter->mv_list = NULL;
 
+	/* if SR-IOV is already disabled then there is nothing to do */
+	if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
+		return;
+
 #ifdef CONFIG_PCI_IOV
 	/* disable iov and allow time for transactions to clear */
 	pci_disable_sriov(adapter->pdev);
-- 
cgit v1.2.3


From 9297127b9cdd8d30c829ef5fd28b7cc0323a7bcd Mon Sep 17 00:00:00 2001
From: Alexander Duyck
Date: Wed, 23 May 2012 02:58:40 +0000
Subject: ixgbe: Change how we check for pre-existing and assigned VFs

This patch does two things.  First it drops the unnecessary work of
searching for enabled VFs when we first bring up the adapter and instead
just uses pci_num_vf to determine how many VFs are enabled on the adapter.

The second thing it does is drop the use of vfdev from the vf_data_storage
structure.  Instead we just search the entire system for a VF that has us
as it's PF, and then if that VF is assigned we indicate that the VFs are
assigned.  This allows us to still check for assigned VFs even if the
vfinfo allocation has failed, or vfinfo has been freed.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe.h       |   1 -
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c  |   8 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 129 +++++++++----------------
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h |   1 -
 4 files changed, 45 insertions(+), 94 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index 5a286adc65c0..eb5928228670 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -130,7 +130,6 @@ struct vf_data_storage {
 	u16 tx_rate;
 	u16 vlan_count;
 	u8 spoofchk_enabled;
-	struct pci_dev *vfdev;
 };
 
 struct vf_macvlans {
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 24f2b455a23f..9c42679ad83e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -7452,13 +7452,7 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
 	if (netdev->reg_state == NETREG_REGISTERED)
 		unregister_netdev(netdev);
 
-	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
-		if (!(ixgbe_check_vf_assignment(adapter)))
-			ixgbe_disable_sriov(adapter);
-		else
-			e_dev_warn("Unloading driver while VFs are assigned "
-				   "- VFs will not be deallocated\n");
-	}
+	ixgbe_disable_sriov(adapter);
 
 	ixgbe_clear_interrupt_scheme(adapter);
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index 593fdd54f9ab..47b2ce740ec1 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -44,40 +44,6 @@
 #include "ixgbe_sriov.h"
 
 #ifdef CONFIG_PCI_IOV
-static int ixgbe_find_enabled_vfs(struct ixgbe_adapter *adapter)
-{
-	struct pci_dev *pdev = adapter->pdev;
-	struct pci_dev *pvfdev;
-	u16 vf_devfn = 0;
-	int device_id;
-	int vfs_found = 0;
-
-	switch (adapter->hw.mac.type) {
-	case ixgbe_mac_82599EB:
-		device_id = IXGBE_DEV_ID_82599_VF;
-		break;
-	case ixgbe_mac_X540:
-		device_id = IXGBE_DEV_ID_X540_VF;
-		break;
-	default:
-		device_id = 0;
-		break;
-	}
-
-	vf_devfn = pdev->devfn + 0x80;
-	pvfdev = pci_get_device(PCI_VENDOR_ID_INTEL, device_id, NULL);
-	while (pvfdev) {
-		if (pvfdev->devfn == vf_devfn &&
-		    (pvfdev->bus->number >= pdev->bus->number))
-			vfs_found++;
-		vf_devfn += 2;
-		pvfdev = pci_get_device(PCI_VENDOR_ID_INTEL,
-					device_id, pvfdev);
-	}
-
-	return vfs_found;
-}
-
 void ixgbe_enable_sriov(struct ixgbe_adapter *adapter,
 			 const struct ixgbe_info *ii)
 {
@@ -86,7 +52,7 @@ void ixgbe_enable_sriov(struct ixgbe_adapter *adapter,
 	struct vf_macvlans *mv_list;
 	int pre_existing_vfs = 0;
 
-	pre_existing_vfs = ixgbe_find_enabled_vfs(adapter);
+	pre_existing_vfs = pci_num_vf(adapter->pdev);
 	if (!pre_existing_vfs && !adapter->num_vfs)
 		return;
 
@@ -205,14 +171,46 @@ void ixgbe_enable_sriov(struct ixgbe_adapter *adapter,
 	      "SRIOV disabled\n");
 	ixgbe_disable_sriov(adapter);
 }
-#endif /* #ifdef CONFIG_PCI_IOV */
 
+static bool ixgbe_vfs_are_assigned(struct ixgbe_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	struct pci_dev *vfdev;
+	int dev_id;
+
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82599EB:
+		dev_id = IXGBE_DEV_ID_82599_VF;
+		break;
+	case ixgbe_mac_X540:
+		dev_id = IXGBE_DEV_ID_X540_VF;
+		break;
+	default:
+		return false;
+	}
+
+	/* loop through all the VFs to see if we own any that are assigned */
+	vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, dev_id, NULL);
+	while (vfdev) {
+		/* if we don't own it we don't care */
+		if (vfdev->is_virtfn && vfdev->physfn == pdev) {
+			/* if it is assigned we cannot release it */
+			if (vfdev->dev_flags & PCI_DEV_FLAGS_ASSIGNED)
+				return true;
+		}
+
+		vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, dev_id, vfdev);
+	}
+
+	return false;
+}
+
+#endif /* #ifdef CONFIG_PCI_IOV */
 void ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
 {
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 gpie;
 	u32 vmdctl;
-	int i;
 
 	/* set num VFs to 0 to prevent access to vfinfo */
 	adapter->num_vfs = 0;
@@ -230,6 +228,15 @@ void ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
 		return;
 
 #ifdef CONFIG_PCI_IOV
+	/*
+	 * If our VFs are assigned we cannot shut down SR-IOV
+	 * without causing issues, so just leave the hardware
+	 * available but disabled
+	 */
+	if (ixgbe_vfs_are_assigned(adapter)) {
+		e_dev_warn("Unloading driver while VFs are assigned - VFs will not be deallocated\n");
+		return;
+
 	/* disable iov and allow time for transactions to clear */
 	pci_disable_sriov(adapter->pdev);
 #endif
@@ -254,12 +261,6 @@ void ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
 	/* take a breather then clean up driver data */
 	msleep(100);
 
-	/* Release reference to VF devices */
-	for (i = 0; i < adapter->num_vfs; i++) {
-		if (adapter->vfinfo[i].vfdev)
-			pci_dev_put(adapter->vfinfo[i].vfdev);
-	}
-
 	adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
 }
 
@@ -493,28 +494,11 @@ static int ixgbe_set_vf_macvlan(struct ixgbe_adapter *adapter,
 	return 0;
 }
 
-int ixgbe_check_vf_assignment(struct ixgbe_adapter *adapter)
-{
-#ifdef CONFIG_PCI_IOV
-	int i;
-	for (i = 0; i < adapter->num_vfs; i++) {
-		if (adapter->vfinfo[i].vfdev->dev_flags &
-				PCI_DEV_FLAGS_ASSIGNED)
-			return true;
-	}
-#endif
-	return false;
-}
-
 int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
 {
 	unsigned char vf_mac_addr[6];
 	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
 	unsigned int vfn = (event_mask & 0x3f);
-	struct pci_dev *pvfdev;
-	unsigned int device_id;
-	u16 thisvf_devfn = (pdev->devfn + 0x80 + (vfn << 1)) |
-				(pdev->devfn & 1);
 
 	bool enable = ((event_mask & 0x10000000U) != 0);
 
@@ -527,31 +511,6 @@ int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
 		 * for it later.
 		 */
 		memcpy(adapter->vfinfo[vfn].vf_mac_addresses, vf_mac_addr, 6);
-
-		switch (adapter->hw.mac.type) {
-		case ixgbe_mac_82599EB:
-			device_id = IXGBE_DEV_ID_82599_VF;
-			break;
-		case ixgbe_mac_X540:
-			device_id = IXGBE_DEV_ID_X540_VF;
-			break;
-		default:
-			device_id = 0;
-			break;
-		}
-
-		pvfdev = pci_get_device(PCI_VENDOR_ID_INTEL, device_id, NULL);
-		while (pvfdev) {
-			if (pvfdev->devfn == thisvf_devfn)
-				break;
-			pvfdev = pci_get_device(PCI_VENDOR_ID_INTEL,
-						device_id, pvfdev);
-		}
-		if (pvfdev)
-			adapter->vfinfo[vfn].vfdev = pvfdev;
-		else
-			e_err(drv, "Couldn't find pci dev ptr for VF %4.4x\n",
-			      thisvf_devfn);
 	}
 
 	return 0;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
index 2ab38d5fda92..1be1d30e4e78 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
@@ -42,7 +42,6 @@ int ixgbe_ndo_get_vf_config(struct net_device *netdev,
 			    int vf, struct ifla_vf_info *ivi);
 void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter);
 void ixgbe_disable_sriov(struct ixgbe_adapter *adapter);
-int ixgbe_check_vf_assignment(struct ixgbe_adapter *adapter);
 #ifdef CONFIG_PCI_IOV
 void ixgbe_enable_sriov(struct ixgbe_adapter *adapter,
 			const struct ixgbe_info *ii);
-- 
cgit v1.2.3


From 1c55ed768bb8b6aee0e1c88e963a429a3c14be07 Mon Sep 17 00:00:00 2001
From: Alexander Duyck
Date: Fri, 11 May 2012 08:33:06 +0000
Subject: ixgbevf: Add lock around mailbox ops to prevent simultaneous access

This change adds a spinlock around the mailbox accesses to prevent
simultaneous access to the mailboxes.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf.h      |  2 ++
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 41 +++++++++++++++++++++--
 2 files changed, 41 insertions(+), 2 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
index e167d1bb6dea..66858b529f13 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
@@ -249,6 +249,8 @@ struct ixgbevf_adapter {
 	bool link_up;
 
 	struct work_struct watchdog_task;
+
+	spinlock_t mbx_lock;
 };
 
 enum ixbgevf_state_t {
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 2dc78d7e297a..7cb678d2d2a2 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -1120,9 +1120,14 @@ static int ixgbevf_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
 	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
 
+	spin_lock(&adapter->mbx_lock);
+
 	/* add VID to filter table */
 	if (hw->mac.ops.set_vfta)
 		hw->mac.ops.set_vfta(hw, vid, 0, true);
+
+	spin_unlock(&adapter->mbx_lock);
+
 	set_bit(vid, adapter->active_vlans);
 
 	return 0;
@@ -1133,9 +1138,14 @@ static int ixgbevf_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
 	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
 
+	spin_lock(&adapter->mbx_lock);
+
 	/* remove VID from filter table */
 	if (hw->mac.ops.set_vfta)
 		hw->mac.ops.set_vfta(hw, vid, 0, false);
+
+	spin_unlock(&adapter->mbx_lock);
+
 	clear_bit(vid, adapter->active_vlans);
 
 	return 0;
@@ -1190,11 +1200,15 @@ static void ixgbevf_set_rx_mode(struct net_device *netdev)
 	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
 
+	spin_lock(&adapter->mbx_lock);
+
 	/* reprogram multicast list */
 	if (hw->mac.ops.update_mc_addr_list)
 		hw->mac.ops.update_mc_addr_list(hw, netdev);
 
 	ixgbevf_write_uc_addr_list(netdev);
+
+	spin_unlock(&adapter->mbx_lock);
 }
 
 static void ixgbevf_napi_enable_all(struct ixgbevf_adapter *adapter)
@@ -1339,6 +1353,8 @@ static void ixgbevf_up_complete(struct ixgbevf_adapter *adapter)
 
 	ixgbevf_configure_msix(adapter);
 
+	spin_lock(&adapter->mbx_lock);
+
 	if (hw->mac.ops.set_rar) {
 		if (is_valid_ether_addr(hw->mac.addr))
 			hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0);
@@ -1350,6 +1366,8 @@ static void ixgbevf_up_complete(struct ixgbevf_adapter *adapter)
 	msg[1] = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
 	hw->mbx.ops.write_posted(hw, msg, 2);
 
+	spin_unlock(&adapter->mbx_lock);
+
 	clear_bit(__IXGBEVF_DOWN, &adapter->state);
 	ixgbevf_napi_enable_all(adapter);
 
@@ -1562,11 +1580,15 @@ void ixgbevf_reset(struct ixgbevf_adapter *adapter)
 	struct ixgbe_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
 
+	spin_lock(&adapter->mbx_lock);
+
 	if (hw->mac.ops.reset_hw(hw))
 		hw_dbg(hw, "PF still resetting\n");
 	else
 		hw->mac.ops.init_hw(hw);
 
+	spin_unlock(&adapter->mbx_lock);
+
 	if (is_valid_ether_addr(adapter->hw.mac.addr)) {
 		memcpy(netdev->dev_addr, adapter->hw.mac.addr,
 		       netdev->addr_len);
@@ -1893,6 +1915,9 @@ static int __devinit ixgbevf_sw_init(struct ixgbevf_adapter *adapter)
 			adapter->netdev->addr_len);
 	}
 
+	/* lock to protect mailbox accesses */
+	spin_lock_init(&adapter->mbx_lock);
+
 	/* Enable dynamic interrupt throttling rates */
 	adapter->rx_itr_setting = 1;
 	adapter->tx_itr_setting = 1;
@@ -2032,8 +2057,16 @@ static void ixgbevf_watchdog_task(struct work_struct *work)
 	 * no LSC interrupt
 	 */
 	if (hw->mac.ops.check_link) {
-		if ((hw->mac.ops.check_link(hw, &link_speed,
-					    &link_up, false)) != 0) {
+		s32 need_reset;
+
+		spin_lock(&adapter->mbx_lock);
+
+		need_reset = hw->mac.ops.check_link(hw, &link_speed,
+						    &link_up, false);
+
+		spin_unlock(&adapter->mbx_lock);
+
+		if (need_reset) {
 			adapter->link_up = link_up;
 			adapter->link_speed = link_speed;
 			netif_carrier_off(netdev);
@@ -2813,9 +2846,13 @@ static int ixgbevf_set_mac(struct net_device *netdev, void *p)
 	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
 	memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
 
+	spin_lock(&adapter->mbx_lock);
+
 	if (hw->mac.ops.set_rar)
 		hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0);
 
+	spin_unlock(&adapter->mbx_lock);
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From 9f19f31dd4903d9c6a7ce33740eadd2b6bdd8ce2 Mon Sep 17 00:00:00 2001
From: Alexander Duyck
Date: Fri, 11 May 2012 08:33:32 +0000
Subject: ixgbevf: Add support for PCI error handling

This change adds support for handling IO errors and slot resets.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 80 +++++++++++++++++++++++
 1 file changed, 80 insertions(+)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 7cb678d2d2a2..ccc801e99610 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -3189,12 +3189,92 @@ static void __devexit ixgbevf_remove(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
+/**
+ * ixgbevf_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t ixgbevf_io_error_detected(struct pci_dev *pdev,
+						  pci_channel_state_t state)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+
+	netif_device_detach(netdev);
+
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	if (netif_running(netdev))
+		ixgbevf_down(adapter);
+
+	pci_disable_device(pdev);
+
+	/* Request a slot slot reset. */
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * ixgbevf_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the ixgbevf_resume routine.
+ */
+static pci_ers_result_t ixgbevf_io_slot_reset(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+
+	if (pci_enable_device_mem(pdev)) {
+		dev_err(&pdev->dev,
+			"Cannot re-enable PCI device after reset.\n");
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+
+	pci_set_master(pdev);
+
+	ixgbevf_reset(adapter);
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * ixgbevf_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the ixgbevf_resume routine.
+ */
+static void ixgbevf_io_resume(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+
+	if (netif_running(netdev))
+		ixgbevf_up(adapter);
+
+	netif_device_attach(netdev);
+}
+
+/* PCI Error Recovery (ERS) */
+static struct pci_error_handlers ixgbevf_err_handler = {
+	.error_detected = ixgbevf_io_error_detected,
+	.slot_reset = ixgbevf_io_slot_reset,
+	.resume = ixgbevf_io_resume,
+};
+
 static struct pci_driver ixgbevf_driver = {
 	.name     = ixgbevf_driver_name,
 	.id_table = ixgbevf_pci_tbl,
 	.probe    = ixgbevf_probe,
 	.remove   = __devexit_p(ixgbevf_remove),
 	.shutdown = ixgbevf_shutdown,
+	.err_handler = &ixgbevf_err_handler
 };
 
 /**
-- 
cgit v1.2.3


From 39cb681b3bb4da17e74d48e553d1bb9a1b759aa5 Mon Sep 17 00:00:00 2001
From: Alexander Duyck
Date: Wed, 6 Jun 2012 05:38:20 +0000
Subject: ixgbe: Fix handling of FDIR_HASH flag

This change makes it so that we can use the atr_sample_rate to determine if
we are capable of supporting ATR. The advantage to this approach is that it
allows us to now determine the setting of the IXGBE_FLAG_FDIR_HASH_CAPABLE
based on the queueing scheme, instead of the queueing scheme being based on
the flag.

Using this approach there are essentially 5 conditions that must be checked
prior to trying to enable ATR:
1.  Is SR-IOV disabled?
2.  Are the number of TCs <= 1?
3.  Is RSS queueing limit greater than 1?
4.  Is atr_sample_rate set?
5.  Is Flow Director perfect filtering disabled?

If any of these conditions are enabled they should disable ATR filtering.
Note that in the case of conditions 1 through 4 being met we will set
things up for ATR queueing, however if test 5 fails we will still leave the
queues allocated for use by perfect filters.  The reason for this is to
allow for us to switch back and forth between ntuple and ATR without
needing to reallocate the descriptor rings.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c  | 22 +++++++-----
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 48 ++++++++++++++++++---------
 2 files changed, 46 insertions(+), 24 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
index 3ff5aa801a6b..29a2a8528073 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
@@ -370,6 +370,9 @@ static bool ixgbe_set_dcb_sriov_queues(struct ixgbe_adapter *adapter)
 	adapter->ring_feature[RING_F_RSS].indices = 1;
 	adapter->ring_feature[RING_F_RSS].mask = IXGBE_RSS_DISABLED_MASK;
 
+	/* disable ATR as it is not supported when VMDq is enabled */
+	adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+
 	adapter->num_rx_pools = vmdq_i;
 	adapter->num_rx_queues_per_pool = tcs;
 
@@ -450,6 +453,9 @@ static bool ixgbe_set_dcb_queues(struct ixgbe_adapter *adapter)
 	f->indices = rss_i;
 	f->mask = rss_m;
 
+	/* disable ATR as it is not supported when multiple TCs are enabled */
+	adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+
 #ifdef IXGBE_FCOE
 	/* FCoE enabled queues require special configuration indexed
 	 * by feature specific indices and offset. Here we map FCoE
@@ -606,16 +612,22 @@ static bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter)
 	f->indices = rss_i;
 	f->mask = IXGBE_RSS_16Q_MASK;
 
+	/* disable ATR by default, it will be configured below */
+	adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+
 	/*
 	 * Use Flow Director in addition to RSS to ensure the best
 	 * distribution of flows across cores, even when an FDIR flow
 	 * isn't matched.
 	 */
-	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
+	if (rss_i > 1 && adapter->atr_sample_rate) {
 		f = &adapter->ring_feature[RING_F_FDIR];
 
 		f->indices = min_t(u16, num_online_cpus(), f->limit);
 		rss_i = max_t(u16, rss_i, f->indices);
+
+		if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+			adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
 	}
 
 #ifdef IXGBE_FCOE
@@ -1054,13 +1066,7 @@ static void ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
 	}
 
 	adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
-	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
-		e_err(probe,
-		      "ATR is not supported while multiple "
-		      "queues are disabled.  Disabling Flow Director\n");
-	}
-	adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
-	adapter->atr_sample_rate = 0;
+
 	ixgbe_disable_sriov(adapter);
 
 	adapter->ring_feature[RING_F_RSS].limit = 1;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 9c42679ad83e..7be35043b751 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -2688,8 +2688,7 @@ void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter,
 		   32;		/* PTHRESH = 32 */
 
 	/* reinitialize flowdirector state */
-	if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) &&
-	    adapter->atr_sample_rate) {
+	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
 		ring->atr_sample_rate = adapter->atr_sample_rate;
 		ring->atr_count = 0;
 		set_bit(__IXGBE_TX_FDIR_INIT_DONE, &ring->state);
@@ -4419,7 +4418,6 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 		if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM)
 			adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE;
 		/* Flow Director hash filters enabled */
-		adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
 		adapter->atr_sample_rate = 20;
 		adapter->ring_feature[RING_F_FDIR].limit =
 							 IXGBE_MAX_FDIR_INDICES;
@@ -6726,7 +6724,6 @@ int ixgbe_setup_tc(struct net_device *dev, u8 tc)
 		ixgbe_set_prio_tc_map(adapter);
 
 		adapter->flags |= IXGBE_FLAG_DCB_ENABLED;
-		adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
 
 		if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
 			adapter->last_lfc_mode = adapter->hw.fc.requested_mode;
@@ -6739,7 +6736,6 @@ int ixgbe_setup_tc(struct net_device *dev, u8 tc)
 			adapter->hw.fc.requested_mode = adapter->last_lfc_mode;
 
 		adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
-		adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
 
 		adapter->temp_dcb_cfg.pfc_mode_enable = false;
 		adapter->dcb_cfg.pfc_mode_enable = false;
@@ -6808,20 +6804,40 @@ static int ixgbe_set_features(struct net_device *netdev,
 	 * Check if Flow Director n-tuple support was enabled or disabled.  If
 	 * the state changed, we need to reset.
 	 */
-	if (!(features & NETIF_F_NTUPLE)) {
-		if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) {
-			/* turn off Flow Director, set ATR and reset */
-			if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) &&
-			    !(adapter->flags & IXGBE_FLAG_DCB_ENABLED))
-				adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
-			need_reset = true;
-		}
-		adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
-	} else if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) {
+	switch (features & NETIF_F_NTUPLE) {
+	case NETIF_F_NTUPLE:
 		/* turn off ATR, enable perfect filters and reset */
+		if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+			need_reset = true;
+
 		adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
 		adapter->flags |= IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
-		need_reset = true;
+		break;
+	default:
+		/* turn off perfect filters, enable ATR and reset */
+		if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
+			need_reset = true;
+
+		adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+
+		/* We cannot enable ATR if SR-IOV is enabled */
+		if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+			break;
+
+		/* We cannot enable ATR if we have 2 or more traffic classes */
+		if (netdev_get_num_tc(netdev) > 1)
+			break;
+
+		/* We cannot enable ATR if RSS is disabled */
+		if (adapter->ring_feature[RING_F_RSS].limit <= 1)
+			break;
+
+		/* A sample rate of 0 indicates ATR disabled */
+		if (!adapter->atr_sample_rate)
+			break;
+
+		adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+		break;
 	}
 
 	if (features & NETIF_F_HW_VLAN_RX)
-- 
cgit v1.2.3


From ce422606696f137e610fd0e677ec72ac33c17842 Mon Sep 17 00:00:00 2001
From: Greg Rose
Date: Tue, 22 May 2012 02:17:49 +0000
Subject: ixgbevf: Fix namespace issue with ixgbe_write_eitr

Make the function static to cleanup namespace.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Sibai Li <Sibai.li@intel.com
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf.h      |  1 -
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 43 ++++++++++-------------
 2 files changed, 19 insertions(+), 25 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
index 66858b529f13..98cadb0c4dab 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
@@ -286,7 +286,6 @@ extern void ixgbevf_free_rx_resources(struct ixgbevf_adapter *,
 extern void ixgbevf_free_tx_resources(struct ixgbevf_adapter *,
 				      struct ixgbevf_ring *);
 extern void ixgbevf_update_stats(struct ixgbevf_adapter *adapter);
-void ixgbevf_write_eitr(struct ixgbevf_q_vector *);
 extern int ethtool_ioctl(struct ifreq *ifr);
 
 extern void ixgbe_napi_add_all(struct ixgbevf_adapter *adapter);
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index ccc801e99610..3f9841d619ad 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -540,6 +540,25 @@ static int ixgbevf_poll(struct napi_struct *napi, int budget)
 	return 0;
 }
 
+/**
+ * ixgbevf_write_eitr - write VTEITR register in hardware specific way
+ * @q_vector: structure containing interrupt and ring information
+ */
+static void ixgbevf_write_eitr(struct ixgbevf_q_vector *q_vector)
+{
+	struct ixgbevf_adapter *adapter = q_vector->adapter;
+	struct ixgbe_hw *hw = &adapter->hw;
+	int v_idx = q_vector->v_idx;
+	u32 itr_reg = q_vector->itr & IXGBE_MAX_EITR;
+
+	/*
+	 * set the WDIS bit to not clear the timer bits and cause an
+	 * immediate assertion of the interrupt
+	 */
+	itr_reg |= IXGBE_EITR_CNT_WDIS;
+
+	IXGBE_WRITE_REG(hw, IXGBE_VTEITR(v_idx), itr_reg);
+}
 
 /**
  * ixgbevf_configure_msix - Configure MSI-X hardware
@@ -662,30 +681,6 @@ static void ixgbevf_update_itr(struct ixgbevf_q_vector *q_vector,
 	ring_container->itr = itr_setting;
 }
 
-/**
- * ixgbevf_write_eitr - write VTEITR register in hardware specific way
- * @q_vector: structure containing interrupt and ring information
- *
- * This function is made to be called by ethtool and by the driver
- * when it needs to update VTEITR registers at runtime.  Hardware
- * specific quirks/differences are taken care of here.
- */
-void ixgbevf_write_eitr(struct ixgbevf_q_vector *q_vector)
-{
-	struct ixgbevf_adapter *adapter = q_vector->adapter;
-	struct ixgbe_hw *hw = &adapter->hw;
-	int v_idx = q_vector->v_idx;
-	u32 itr_reg = q_vector->itr & IXGBE_MAX_EITR;
-
-	/*
-	 * set the WDIS bit to not clear the timer bits and cause an
-	 * immediate assertion of the interrupt
-	 */
-	itr_reg |= IXGBE_EITR_CNT_WDIS;
-
-	IXGBE_WRITE_REG(hw, IXGBE_VTEITR(v_idx), itr_reg);
-}
-
 static void ixgbevf_set_itr(struct ixgbevf_q_vector *q_vector)
 {
 	u32 new_itr = q_vector->itr;
-- 
cgit v1.2.3


From 252562c207a850106d9d5b41a41d29f96c0530b7 Mon Sep 17 00:00:00 2001
From: Alexander Duyck
Date: Thu, 24 May 2012 01:59:27 +0000
Subject: ixgbe: Reduce Rx header size to what is actually used

The recent changes to netdev_alloc_skb actually make it so that the size of
the buffer now actually has a more direct input on the truesize.  So in
order to make best use of the piece of a page we are allocated I am
reducing the IXGBE_RX_HDR_SIZE to 256 so that our truesize will be reduced
by 256 bytes as well.

This should result in performance improvements since the number of uses per
page should increase from 4 to 6 in the case of a 4K page.  In addition we
should see socket performance improvements due to the truesize dropping
to less than 1K for buffers less than 256 bytes.

Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe.h      | 15 ++++++++-------
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |  4 ++--
 2 files changed, 10 insertions(+), 9 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index eb5928228670..b9623e9ea895 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -77,17 +77,18 @@
 #define IXGBE_MAX_FCPAUSE		 0xFFFF
 
 /* Supported Rx Buffer Sizes */
-#define IXGBE_RXBUFFER_512   512    /* Used for packet split */
+#define IXGBE_RXBUFFER_256    256  /* Used for skb receive header */
 #define IXGBE_MAX_RXBUFFER  16384  /* largest size for a single descriptor */
 
 /*
- * NOTE: netdev_alloc_skb reserves up to 64 bytes, NET_IP_ALIGN mans we
- * reserve 2 more, and skb_shared_info adds an additional 384 bytes more,
- * this adds up to 512 bytes of extra data meaning the smallest allocation
- * we could have is 1K.
- * i.e. RXBUFFER_512 --> size-1024 slab
+ * NOTE: netdev_alloc_skb reserves up to 64 bytes, NET_IP_ALIGN means we
+ * reserve 64 more, and skb_shared_info adds an additional 320 bytes more,
+ * this adds up to 448 bytes of extra data.
+ *
+ * Since netdev_alloc_skb now allocates a page fragment we can use a value
+ * of 256 and the resultant skb will have a truesize of 960 or less.
  */
-#define IXGBE_RX_HDR_SIZE IXGBE_RXBUFFER_512
+#define IXGBE_RX_HDR_SIZE IXGBE_RXBUFFER_256
 
 #define MAXIMUM_ETHERNET_VLAN_SIZE (ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN)
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 7be35043b751..b376926af890 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1517,8 +1517,8 @@ static bool ixgbe_cleanup_headers(struct ixgbe_ring *rx_ring,
 	 * 60 bytes if the skb->len is less than 60 for skb_pad.
 	 */
 	pull_len = skb_frag_size(frag);
-	if (pull_len > 256)
-		pull_len = ixgbe_get_headlen(va, pull_len);
+	if (pull_len > IXGBE_RX_HDR_SIZE)
+		pull_len = ixgbe_get_headlen(va, IXGBE_RX_HDR_SIZE);
 
 	/* align pull length to size of long to optimize memcpy performance */
 	skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long)));
-- 
cgit v1.2.3


From b92ad72dea9925359e9dfa70c4cbf8db6f1b2d65 Mon Sep 17 00:00:00 2001
From: Alexander Duyck
Date: Fri, 25 May 2012 01:45:38 +0000
Subject: ixgbe: Use num_tcs.pg_tcs as upper limit for TC when checking based
 on UP

This change makes it so the function ixgbe_dcb_get_tc_from_up will use the
num_tcs.pg_tcs to determine the starting value for determining a traffic
class based on a user priority.  The main motivation for this change is to
address possible bad configurations in which more TCs worth of data are
populated then there are actual TCs.  By limiting this value we can at
least make certain we are not providing a map with values that are out of
range.

As a result any user priorities that are setup in the configuration with a
traffic class mapping higher than what the hardware supports will be
reported as being on TC 0.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c
index 5442b359141e..9bc17c0cb972 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c
@@ -232,18 +232,22 @@ u8 ixgbe_dcb_get_tc_from_up(struct ixgbe_dcb_config *cfg, int direction, u8 up)
 {
 	struct tc_configuration *tc_config = &cfg->tc_config[0];
 	u8 prio_mask = 1 << up;
-	u8 tc;
+	u8 tc = cfg->num_tcs.pg_tcs;
+
+	/* If tc is 0 then DCB is likely not enabled or supported */
+	if (!tc)
+		goto out;
 
 	/*
-	 * Test for TCs 7 through 1 and report the first match we find.  If
+	 * Test from maximum TC to 1 and report the first match we find.  If
 	 * we find no match we can assume that the TC is 0 since the TC must
 	 * be set for all user priorities
 	 */
-	for (tc = MAX_TRAFFIC_CLASS - 1; tc; tc--) {
+	for (tc--; tc; tc--) {
 		if (prio_mask & tc_config[tc].path[direction].up_to_tc_bitmap)
 			break;
 	}
-
+out:
 	return tc;
 }
 
-- 
cgit v1.2.3


From 95447461fa9ae3d879c84c1d2f2f8da2fdcd8f34 Mon Sep 17 00:00:00 2001
From: John Fastabend
Date: Thu, 31 May 2012 12:42:26 +0000
Subject: ixgbe: fix RAR entry counting for generic and fdb_add()

Do RAR entry accounting correctly so that errors are reported and
promisc mode is set correctly when the number of entries exceeds
the hardware limits.

This can happen with many macvlan devices attached to the PF or
by adding many fdb entries in SR-IOV modes.

Also this includes a small refactor to fdb_add() to avoid having so
many nested if/else statements after adding a check for the number
or RAR entries.

The max entries for the PF is currently 16 we allow 15 additional
entries to account for the defined MAC.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index b376926af890..84370e78a0fb 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -3441,14 +3441,18 @@ static int ixgbe_write_uc_addr_list(struct net_device *netdev)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
-	unsigned int rar_entries = IXGBE_MAX_PF_MACVLANS;
+	unsigned int rar_entries = hw->mac.num_rar_entries - 1;
 	int count = 0;
 
+	/* In SR-IOV mode significantly less RAR entries are available */
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+		rar_entries = IXGBE_MAX_PF_MACVLANS - 1;
+
 	/* return ENOMEM indicating insufficient memory for addresses */
 	if (netdev_uc_count(netdev) > rar_entries)
 		return -ENOMEM;
 
-	if (!netdev_uc_empty(netdev) && rar_entries) {
+	if (!netdev_uc_empty(netdev)) {
 		struct netdev_hw_addr *ha;
 		/* return error if we do not support writing to RAR table */
 		if (!hw->mac.ops.set_rar)
@@ -6861,7 +6865,10 @@ static int ixgbe_ndo_fdb_add(struct ndmsg *ndm,
 			     u16 flags)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(dev);
-	int err = -EOPNOTSUPP;
+	int err;
+
+	if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
+		return -EOPNOTSUPP;
 
 	if (ndm->ndm_state & NUD_PERMANENT) {
 		pr_info("%s: FDB only supports static addresses\n",
@@ -6869,13 +6876,17 @@ static int ixgbe_ndo_fdb_add(struct ndmsg *ndm,
 		return -EINVAL;
 	}
 
-	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
-		if (is_unicast_ether_addr(addr))
+	if (is_unicast_ether_addr(addr)) {
+		u32 rar_uc_entries = IXGBE_MAX_PF_MACVLANS;
+
+		if (netdev_uc_count(dev) < rar_uc_entries)
 			err = dev_uc_add_excl(dev, addr);
-		else if (is_multicast_ether_addr(addr))
-			err = dev_mc_add_excl(dev, addr);
 		else
-			err = -EINVAL;
+			err = -ENOMEM;
+	} else if (is_multicast_ether_addr(addr)) {
+		err = dev_mc_add_excl(dev, addr);
+	} else {
+		err = -EINVAL;
 	}
 
 	/* Only return duplicate errors if NLM_F_EXCL is set */
-- 
cgit v1.2.3


From 3f4a6f009f6319d2fb7f6fe654264e1eabe0e50b Mon Sep 17 00:00:00 2001
From: John Fastabend
Date: Tue, 5 Jun 2012 05:58:52 +0000
Subject: ixgbe: remove extra unused queues in DCB + FCoE case

With DCB and FCoE configured extra queues may be allocated and
never used. After this patch we calculate the max correctly.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 84370e78a0fb..bc7e79b92b63 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -7048,6 +7048,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	int i, err, pci_using_dac;
 	u8 part_str[IXGBE_PBANUM_LENGTH];
 	unsigned int indices = num_possible_cpus();
+	unsigned int dcb_max = 0;
 #ifdef IXGBE_FCOE
 	u16 device_caps;
 #endif
@@ -7097,15 +7098,16 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	pci_save_state(pdev);
 
 #ifdef CONFIG_IXGBE_DCB
-	indices *= MAX_TRAFFIC_CLASS;
+	if (ii->mac == ixgbe_mac_82598EB)
+		dcb_max = min_t(unsigned int, indices * MAX_TRAFFIC_CLASS,
+				IXGBE_MAX_RSS_INDICES);
+	else
+		dcb_max = min_t(unsigned int, indices * MAX_TRAFFIC_CLASS,
+				IXGBE_MAX_FDIR_INDICES);
 #endif
 
 	if (ii->mac == ixgbe_mac_82598EB)
-#ifdef CONFIG_IXGBE_DCB
-		indices = min_t(unsigned int, indices, MAX_TRAFFIC_CLASS * 4);
-#else
 		indices = min_t(unsigned int, indices, IXGBE_MAX_RSS_INDICES);
-#endif
 	else
 		indices = min_t(unsigned int, indices, IXGBE_MAX_FDIR_INDICES);
 
@@ -7113,6 +7115,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	indices += min_t(unsigned int, num_possible_cpus(),
 			 IXGBE_MAX_FCOE_INDICES);
 #endif
+	indices = max_t(unsigned int, dcb_max, indices);
 	netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), indices);
 	if (!netdev) {
 		err = -ENOMEM;
-- 
cgit v1.2.3


From b6dfd939fdc249fcf8cd7b8006f76239b33eb581 Mon Sep 17 00:00:00 2001
From: Don Skidmore
Date: Wed, 11 Jul 2012 07:17:42 +0000
Subject: ixgbe: add support for new 82599 device

This patch adds support for a new 82599 device that supports WoL.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 1 +
 2 files changed, 2 insertions(+)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index bc7e79b92b63..30699815451c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -7001,6 +7001,7 @@ int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id,
 			if (hw->bus.func != 0)
 				break;
 		case IXGBE_SUBDEV_ID_82599_SFP:
+		case IXGBE_SUBDEV_ID_82599_RNDC:
 			is_wol_supported = 1;
 			break;
 		}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index fe0a19d91d4a..400f86a31174 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -54,6 +54,7 @@
 #define IXGBE_DEV_ID_82599_BACKPLANE_FCOE       0x152a
 #define IXGBE_DEV_ID_82599_SFP_FCOE      0x1529
 #define IXGBE_SUBDEV_ID_82599_SFP        0x11A9
+#define IXGBE_SUBDEV_ID_82599_RNDC       0x1F72
 #define IXGBE_SUBDEV_ID_82599_560FLR     0x17D0
 #define IXGBE_DEV_ID_82599_SFP_EM        0x1507
 #define IXGBE_DEV_ID_82599_SFP_SF2       0x154D
-- 
cgit v1.2.3


From b724e9f2505513df1455b03efea166f7dfa0f7d5 Mon Sep 17 00:00:00 2001
From: Alexander Duyck
Date: Tue, 17 Jul 2012 01:20:28 +0000
Subject: ixgbe: Use 1TC DCB instead of disabling DCB for MSI and legacy
 interrupts

This change makes it so that we can use 1TC DCB in the case of MSI and
legacy interrupts.  The advantage to this is that it allows us to fully
support FCoE w/ DCB instead of having to drop to link flow control only
when using these interrupt modes.

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c  | 18 +++++++++++++++++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |  6 ------
 2 files changed, 17 insertions(+), 7 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
index 29a2a8528073..17ecbcedd548 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
@@ -1065,11 +1065,27 @@ static void ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
 			return;
 	}
 
-	adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
+	/* disable DCB if number of TCs exceeds 1 */
+	if (netdev_get_num_tc(adapter->netdev) > 1) {
+		e_err(probe, "num TCs exceeds number of queues - disabling DCB\n");
+		netdev_reset_tc(adapter->netdev);
 
+		if (adapter->hw.mac.type == ixgbe_mac_82598EB)
+			adapter->hw.fc.requested_mode = adapter->last_lfc_mode;
+
+		adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
+		adapter->temp_dcb_cfg.pfc_mode_enable = false;
+		adapter->dcb_cfg.pfc_mode_enable = false;
+	}
+	adapter->dcb_cfg.num_tcs.pg_tcs = 1;
+	adapter->dcb_cfg.num_tcs.pfc_tcs = 1;
+
+	/* disable SR-IOV */
 	ixgbe_disable_sriov(adapter);
 
+	/* disable RSS */
 	adapter->ring_feature[RING_F_RSS].limit = 1;
+
 	ixgbe_set_num_queues(adapter);
 	adapter->num_q_vectors = 1;
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 30699815451c..3b6784cf134a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -6703,12 +6703,6 @@ int ixgbe_setup_tc(struct net_device *dev, u8 tc)
 	struct ixgbe_adapter *adapter = netdev_priv(dev);
 	struct ixgbe_hw *hw = &adapter->hw;
 
-	/* Multiple traffic classes requires multiple queues */
-	if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
-		e_err(drv, "Enable failed, needs MSI-X\n");
-		return -EINVAL;
-	}
-
 	/* Hardware supports up to 8 traffic classes */
 	if (tc > adapter->dcb_cfg.num_tcs.pg_tcs ||
 	    (hw->mac.type == ixgbe_mac_82598EB &&
-- 
cgit v1.2.3


From 76886596921dd0e058f7f0a16de6151629390d15 Mon Sep 17 00:00:00 2001
From: Akeem G. Abodunrin
Date: Tue, 17 Jul 2012 04:51:18 +0000
Subject: igb: reset PHY in the link_up process to recover PHY setting after
 power down.

There was a previous patch to resolve issue with 82576 losing PHY setting
after PHY power down. However that previous implementation triggered speed
mismatch and occasional link lost. Now, this patch resolves both initial
PHY setting and speed mismatch issues.

Signed-off-by: Akeem G. Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 8adeca9787ca..1050411e7ca3 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1500,11 +1500,12 @@ static void igb_configure(struct igb_adapter *adapter)
  **/
 void igb_power_up_link(struct igb_adapter *adapter)
 {
+	igb_reset_phy(&adapter->hw);
+
 	if (adapter->hw.phy.media_type == e1000_media_type_copper)
 		igb_power_up_phy_copper(&adapter->hw);
 	else
 		igb_power_up_serdes_link_82575(&adapter->hw);
-	igb_reset_phy(&adapter->hw);
 }
 
 /**
-- 
cgit v1.2.3