From 8cdc3f6c5d22dd059fe8127be7b5cae113e79afb Mon Sep 17 00:00:00 2001 From: Taku Izumi Date: Fri, 21 Aug 2015 17:29:18 +0900 Subject: fjes: Hardware initialization routine This patch adds hardware initialization routine to be invoked at driver's .probe routine. Signed-off-by: Taku Izumi Signed-off-by: David S. Miller --- drivers/net/fjes/fjes_regs.h | 102 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 102 insertions(+) create mode 100644 drivers/net/fjes/fjes_regs.h (limited to 'drivers/net/fjes/fjes_regs.h') diff --git a/drivers/net/fjes/fjes_regs.h b/drivers/net/fjes/fjes_regs.h new file mode 100644 index 000000000000..4d0e0719645e --- /dev/null +++ b/drivers/net/fjes/fjes_regs.h @@ -0,0 +1,102 @@ +/* + * FUJITSU Extended Socket Network Device driver + * Copyright (c) 2015 FUJITSU LIMITED + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, see . + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + */ + +#ifndef FJES_REGS_H_ +#define FJES_REGS_H_ + +#include + +#define XSCT_DEVICE_REGISTER_SIZE 0x1000 + +/* register offset */ +/* Information registers */ +#define XSCT_OWNER_EPID 0x0000 /* Owner EPID */ +#define XSCT_MAX_EP 0x0004 /* Maximum EP */ + +/* Device Control registers */ +#define XSCT_DCTL 0x0010 /* Device Control */ + +/* Command Control registers */ +#define XSCT_SHSTSAL 0x0028 /* Share status address Low */ +#define XSCT_SHSTSAH 0x002C /* Share status address High */ + +#define XSCT_REQBL 0x0034 /* Request Buffer length */ +#define XSCT_REQBAL 0x0038 /* Request Buffer Address Low */ +#define XSCT_REQBAH 0x003C /* Request Buffer Address High */ + +#define XSCT_RESPBL 0x0044 /* Response Buffer Length */ +#define XSCT_RESPBAL 0x0048 /* Response Buffer Address Low */ +#define XSCT_RESPBAH 0x004C /* Response Buffer Address High */ + +/* Interrupt Control registers */ +#define XSCT_IMS 0x0084 /* Interrupt mask set */ +#define XSCT_IMC 0x0088 /* Interrupt mask clear */ + +/* register structure */ +/* Information registers */ +union REG_OWNER_EPID { + struct { + __le32 epid:16; + __le32:16; + } bits; + __le32 reg; +}; + +union REG_MAX_EP { + struct { + __le32 maxep:16; + __le32:16; + } bits; + __le32 reg; +}; + +/* Device Control registers */ +union REG_DCTL { + struct { + __le32 reset:1; + __le32 rsv0:15; + __le32 rsv1:16; + } bits; + __le32 reg; +}; + +enum REG_ICTL_MASK { + REG_ICTL_MASK_INFO_UPDATE = 1 << 20, + REG_ICTL_MASK_DEV_STOP_REQ = 1 << 19, + REG_ICTL_MASK_TXRX_STOP_REQ = 1 << 18, + REG_ICTL_MASK_TXRX_STOP_DONE = 1 << 17, + REG_ICTL_MASK_RX_DATA = 1 << 16, + REG_ICTL_MASK_ALL = GENMASK(20, 16), +}; + +struct fjes_hw; + +u32 fjes_hw_rd32(struct fjes_hw *hw, u32 reg); + +#define wr32(reg, val) \ +do { \ + u8 *base = hw->base; \ + writel((val), &base[(reg)]); \ +} while (0) + +#define rd32(reg) (fjes_hw_rd32(hw, reg)) + +#endif /* FJES_REGS_H_ */ -- cgit v1.2.3